Skip to main content

NANOTECNOLOGIA ELECTROQUIMICA PARA APLICACIONES CATALITICAS EN LOS CAMPOS MEDIOAMBIENTAL Y ALMACENAJE DE ENERGIA

PID2019-105844RB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2019
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 17
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Organophosphorus pesticides (chlorfenvinphos, phosmet and fenamiphos) photoelectrodegradation by using WO3 nanostructures as photoanode

  • Roselló-Márquez, Gemma
  • Fernández Domene, Ramón Manuel
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] The photoelectrocatalytic (PEC) degradation of recalcitrant and toxic organophosphorus pesticides, fenamiphos, chlorfenvinphos and phosmet, has been performed by using an innovative WO3 nanostructure as photoanode. The nanostructure has been synthesized by anodization in acidic media in the presence of a very small amount (0.05 M) of H2O2, and its composition as well as its photoelectrochemical properties have been characterized using X-ray Photoelectron Spectroscopy and X-ray diffraction as composition technique and photoelectrochemical impedance spectroscopy as photoelectrochemical analysis. After 24 h of experiment, a degradation of 95% of chlorfenvinphos, 99.9% of phosmet and 100% of fenamiphos has been achieved following pseudo-first order kinetics, indicating the good PEC efficiency of this WO3 nanostructure. Moreover, different intermediates have been identified by means of Ultra-High Performance Liquid Chromatograph coupled to a Time of Flight and Mass Spectrometer (UHPLC-Q-TOF/MS) for each of the pesticides after 24 h of photoelectrocatalytic degradation. With these identified compounds, a degradation route has been proposed for each of the pesticides in which they are decomposed into other smaller and less toxic molecules., Authors would like to show their gratitude for the financial support to the Ministerio de Ciencia e Innovacion (Project code: PID2019-105844RB-I00) and for the cofinance by the European Social Fund. Authors would also want to express thanks the Ministerio de Ciencia, Innovacion y Universidades (Project Code: CTQ2017-90659-REDT) and the Generalitat Valenciana and European Social Fund for its support in the UHPLC-Q-TOF/MS purchase (IDIFEDER/2018/044) . Gemma Rosello Marquez also thanks the Generalitat Valenciana for the predoctoral granting (ACIF/2018/159).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influence of annealing atmosphere on photoelectrochemical response of TiO2 nanotubes anodized under controlled hydrodynamic conditions

  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • García-García, D.M.|||0000-0001-8951-4558
  • Garcia-Anton, Jose|||0000-0002-0289-1324
  • Solsona, B.
  • Sánchez-Tovar, R.
  • Fernández Domene, R.M.
[EN] The influence of three annealing atmospheres (air, nitrogen and argon) and the use of controlled hydrodynamic conditions (from 0 to 5000 rpm) on morphological, structural, chemical and photoelectrochemical properties of TiO2 nanotubes have been evaluated. For this purpose, different characterization techniques have been used: Field Emission Scanning Electron Microscopy, Raman Confocal Laser Spectroscopy, X-Ray Diffraction, X-Ray Photoelectron Spectroscopy, Incident Photon-to-electron Conversion Efficiency measurements, ultraviolet-visible absorption spectra, Mott-Schottky analysis and photoelectrochemical water splitting tests. According to the results, it can be concluded that both hydrodynamic conditions and annealing in non-oxidizing atmospheres improve the photoelectrochemical response of the TiO2 nanotubes. This fact has been attributed to the oxygen vacancies formed after annealing in argon and nitrogen atmospheres and also to the presence of nitrogen into the TiO2 lattice due to the thermal treatment in the nitrogen atmosphere., The authors would like to express their gratitude for the financial support to the "Generalitat Valenciana (GV/2020/044) " as well as to the "Agencia Estatal de Investigacion" (Project Code: PID2019-105844RB-I00/AEI/10.13039/501100011033) ", for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012) and the co-finance by the European Social Fund. Authors from UV also thank MINECO (MAT2017-84118-C2-1-R project) and FEDER for funding.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Degradation of Diazinon based on photoelectrocatalytic technique using enhanced WO3 nanostructures: Mechanism and pathway

  • Roselló-Márquez, Gemma
  • Fernández-Domene, Ramón Manuel
  • Sánchez-Tovar, Rita
  • Cifre-Herrando, Mireia|||0000-0002-8800-3585
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] In this work, a resistant and toxic pesticide called diazinon was degraded through the photoelectrocatalysis (PEC) technique using tungsten oxide (WO3) nanostructures, applying an external bias of 1VAg/AgCl and simulated solar illumination. For this, WO3 nanostructures have been synthesized using electrochemical anodization in 0.05 M hydrogen peroxide and 1.5 M of different acidic electrolytes: H2SO4, CH4O3S or HNO3. Morphology, composition and crystallinity of the samples were evaluated through Field Emission Scanning Electron Microscopy (FE-SEM), Atomic Force Microscopy (AFM) and Raman Spectroscopy. Then, the photoelectrochemical properties of the samples were analyzed by Photo-Electrochemical Impedance Spectroscopy (PEIS). The conclusion obtained with these studies was that the nanostructures obtained in the CH4O3S-H2O2 electrolyte presented better photoelectrochemical behavior than the others. The degradation process was checked by UV-Visible, and through Ultra High-Performanc liquid Chromatography and Mass Spectrometry (UHPLC-Q-TOF/MS) the courses of the experiments have been controlled and five possible degradation intermediates have been identified. Finally, after 24 h of experiment, 90% degradation efficiency has been achieved, since it has been possible to decrease from 20 ppm to 2 ppm., Authors would like to show their gratitude for the financial support to the Ministerio de Ciencia e Innovacion (Project code: PID2019105844RB-I00) in the acquisition of Laser Raman Microscope (UPOV083E-012) and for the co-finance by the European Social Fund. Authors would also want to express thanks the Ministerio de Ciencia, Innovacion y Universidades (Project Code: CTQ2017-90659-REDT) and the Generalitat Valenciana for its support in the Atomic Force Microscope and UHPLC-Q-TOF/MS purchase (IDIFEDER/2018/044). Ramon M. Fernandez Domene also express gratitude to the Universitat Politecnica de Valencia (UPV) for the post-doctoral granting (PAID-10-17) and Gemma Rosello Marquez also thanks the Generalitat Valenciana for the pre-doctoral granting (ACIF/2018/159).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Indirect charge transfer of holes via surface states in ZnO nanowires for photoelectrocatalytic applications

  • Batista-Grau, P.
  • Fernández Domene, R. M.
  • Sánchez-Tovar, R.
  • Solsona, B.
  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] In this work, ZnO nanowires with high aspect ratio were obtained by fast and simple electrochemical anodization. Morphological, structural and photoelectrochemical characteristics of the synthesized ZnO nanowires were evaluated by using different techniques: field emission scanning electron microscopy, atomic force microscopy, high resolution transmission electron microscopy, Raman spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, UV-VIS spectroscopy, Mott-Schottky analysis and photoelectrochemical impedance spectroscopy. The synthesized ZnO nanowires presented high roughness and high crystallinity. Besides, surface defects were identified in the sample. The value of the donor density (ND) was in the order of 1019 cm-3 in the dark and 1020 cm-3 under illumination. In addition, the ZnO nanowires presented good photosensibility, with a photocurrent density response 85 times higher than a ZnO compact layer, and lower resistance to charge transfer. The charge transfer processes taking place at the ZnO/electrolyte interface were studied, since these processes strongly influence the photoelectrocatalytic efficiency of the material. According to the results, the charge transfer of holes in the synthesized ZnO nanowires occurs indirectly via surface states. In this regard, surface states may be an important feature for photoelectrocatalytic applications since they could provide lower onset voltages and higher anodic current densities., Authors would like to express their gratitude to the Generalitat Valenciana and to the European Social Fund for their financial support within the subvention GJIDI/2018/A/067. Authors also thank to project co-funded by FEDER operational programme 2014-2020 of Comunitat Valenciana (IDIFEDER/18/044). Finally, authors thank to Ministerio de Ciencia e Innovacion-Agencia Estatal de Investigacion (PID2019-105844RB-I00/AEI/10.13039/501100011033) and MINECO for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012) co -financed by the European Social Fund. Authors would also like to ex-press their gratitude for the financial support to the Generalitat Valenciana (GV/2021/011). Authors also thanks MINECO for MAT2017-84118-C2-1-R MCIN/AEI/10.13039/501100011033/project and FEDER Una manera de hacer Europa.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Amorphous surface modification and scalability of WO3 nanostructures for photoelectrocatalytic degradation of organic pollutants

  • Cifre-Herrando, Mireia|||0000-0002-8800-3585
  • Garcia-Anton, Jose|||0000-0002-0289-1324
  • Roselló-Márquez, Gemma
  • Mais, L.
  • Mascia, M.
[EN] This work explores the use of WO3 nanostructures as an effective solution for the removal of emerging contaminants from water, specifically focusing on the degradation of diethyl phthalate (DEP), a widely recognized environmental pollutant. A key aspect of the study is the scaling of the electrochemically active area and surface modification of WO3 nanostructures, progressing from 0.5 cm2 to 2.5 cm2, followed by a surface reduction treatment that induces amorphization and enhances their photoelectrocatalytic activity after applying a 5-minute reduction treatment. Scaling was further extended to 15 cm2, with the 15 cm2 nanostructures exhibiting the highest DEP degradation rate, achieving a degradation constant of 0.0988 h-1. The study also investigates the effect of key operational parameters such as applied voltage (1 V and 1.5 V), contaminant concentration (10 ppm, 25 ppm and 100 ppm). Reusability was also tested, with optimal conditions identified as 10 ppm DEP, 1 V, and the ability to reuse the nanostructures up to three times. Finally, under these optimal conditions, the degradation of DEP was monitored, leading to the identification of ten intermediate products and the proposal of a degradation pathway, highlighting the potential of WO3 for sustainable and efficient water treatment applications., The authors wish to thank the economic support granted by AEI (PID2019 105844RB-I00/AEI/10.13039/501100011033). M. CifreHerrando acknowledges the Ministerio de Universidades for the predoctoral grant (FPU19/02466). G. Rosello-Marquez is also grateful to UPV for the post-doctoral grant (PAID-10 21) and the grant to support postdoctoral research at UPV (PAID-PD-22). Additionally, funding from the Spanish Research Network E3TECH-PLUS (RED2022 134552-T, MICINN/AEI) is acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Novel TiO2-WO3 self-ordered nanotubes used as photoanodes: Influence of Na2WO4 and H2O2 concentration during electrodeposition

  • Sánchez-Tovar, R.
  • Ibáñez-Arlandis, L.
  • Fernández Domene, R. M.
  • Roselló-Márquez, Gemma
  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] Hybrid TiO2-WO3 nanostructures has been synthesized by electrochemical anodization under controlled hydrodynamic conditions followed by electrodeposition in the presence of different contents of Na2WO4 (5, 15 and 25 mM) and H2O2 (20, 30 and 40 mM). The influence of the electrolyte used for electrodeposition on the morphology, crystalline structure and photoelectrochemical response for water splitting has been evaluated through Field Emission Electronic Microscopy, High-Resolution Transmission Electron Microscopy, Confocal Raman Spectroscopy, Grazing Incidence X Ray Diffraction, X-Ray Photoelectron Spectroscopy, Atomic Force microscopy and photocurrent versus potential measurements. Additionally, a statistical multi-factor categorical analysis was performed to determine the most significant influential parameters. Results show that hybrid TiO2-WO3 nanostructures formed by simple anodization and subsequent electrodeposition with 30 mM H2O2 and 25 mM Na2WO4 present the highest photocurrent response, 60% higher if compared to TiO2 anodized nanotubes, solving the main problems presented during the usual fabrication of heterostructures, i.e. high temperatures, pressures, number of chemicals and time., Authors thank for the financial support to the Generalitat Valenciana (Project Code: GV/2020/044) as well as to the project co-funded by FEDER operational programme 2014-2020 of Comunitat Valenciana (IDIFEDER/18/044). Authors also thank the Ministerio de Ciencia e Innovacion (Project Code: PID2019-105844RB-I00), for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012) and for the cofinance by the European Social Fund. Authors also thank Alicia Mestre and Said Agouram from the SCSIE (Universitat de Val`encia) for their help with the XRD and HR-TEM measurements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influence of Zn(NO3)2 concentration during the ZnO electrodeposition on TiO2 nanosponges used in photoelectrochemical applications

  • Navarro-Gázquez, Pedro José
  • Solsona-Espriu, Benjamín
  • Fernández-Domene, Ramón Manuel
  • Sánchez Tovar, Rita
  • Garcia-Anton, Jose
  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • Muñoz-Portero, María-José|||0000-0002-7407-2598
[EN] TiO2/ZnO hybrid nanostructures were formed by electrochemical anodization of titanium and subsequently ZnO electrodeposition. Different Zn(NO3)(2) concentrations were used for electrodeposition (10-60 mM). A structural, morphological, and compositional characterisation was performed using FE-SEM, TEM, AFM, XRD, UV-Visible spectroscopy, and band gap measurements. It was reported that the morphology of the nanostructures changed with the Zn(NO3)2 concentration. Nanosponges were observed for concentrations from 10 mM to 30 mM whereas at 40 mM the morphology changed to well-defined ZnO hexagonal nanorods. At 50 mM a surface covered by ZnO with undefined rods could be seen and, at 60 mM, a morphology of nanoplatelets was observed. Besides, as Zn (NO3)2 concentration increased, the ZnO amount, the roughness, and the ZnO crystalline size also increased, while the band gap decreased. Electrochemical characterisation of nanostructures was performed by water splitting, stability to photocorrosion, EIS, and Mott-Schottky tests. The optimal samples were TiO2/ZnO hybrid nanostructures electrodeposited with 30 mM Zn(NO3)(2), since they were stable against photocorrosion and, compared to TiO2 nanosponges, showed an increase in photoelectrochemical activity of 204%, a lower resistance to charge transfer, and a higher donor density. Overall, the most efficient samples presented an intermediate Znloading because of a maximization of the TiO2-ZnO interaction and the prevention of the formation of non interacting ZnO structures., The authors would like to thank the financial support to the "Agencia Estatal de Investigacion" (PID2019-105844RB-I00/MCIN/AEI/10.13039/501100011033) and the co-finance by the "European Social Fund". The authors also thank the "Generalitat Valenciana" for its help in the Atomic Force Microscope acquisition (IDIFEDER/2018/044). Pedro Jose Navarro Gazquez wants to show his gratitude for the GRANT PEJ2018-003596-A-AR funded by MCIN/AEI/10.13039/501100011033 and by "ESF Investing in your future". Authors from UV also thank MINECO (MAT2017-84118-C2-1-R project) and FEDER for funding. SCSIE from UV is also acknowledged for TEM and XRD measurements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Synthesis of WO3 nanorods through anodization in the presence of citric acid: Formation mechanism, properties and photoelectrocatalytic performance

  • Fernández-Domene, R. M.
  • Roselló-Márquez, Gemma
  • Sánchez-Tovar, R.
  • Cifre-Herrando, Mireia|||0000-0002-8800-3585
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] In this study, WO3 nanomds have been fabricated by simple anodization in the presence of different amounts of citric acid and at different anodization times. A comprehensive morphological, structural, electrochemical and photoelectrochemical characterization of different samples has been carried out. Moreover, a formation mechanism for WO3 nanorods has been proposed. Finally, these nanostructures have been proven to be excellent visible-light photoelectrocatalysts to remove persistent organic pollutants present in wastewaters, such as fenamiphos. Almost the 80% of this molecule was eliminated from the test solution after 180 min of irradiation, indicating the great potential of these WO3 nanorods, fabricated following a very simple and unexpensive procedure, in the energy and environmental fields as photoelectrocatalysts., Authors thank for the financial support to the Agencia Estatal de Investigacion AEI (PID2019-105844RB-I00/AEI/10.13039/501100011033), for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012) and for the co-finance by the European Social Fund. Authors also thank the Generalitat Valenciana for the financial support through the subvention GV/2020/044. Finally, Gemma Rosell o Marquez and Mireia Herrando Cifre also thank the Generalitat Valenciana for the concession of two pre-doctoral grants (ACIF/2018/159 and ACIF/2020/229).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Characterization and Comparison of WO3/WO3-MoO3 and TiO2/TiO2-ZnO Nanostructures for Photoelectrocatalytic Degradation of the Pesticide Imazalil

  • Cifre-Herrando, Mireia|||0000-0002-8800-3585
  • Muñoz-Portero, María-José|||0000-0002-7407-2598
  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • Garcia-Anton, Jose|||0000-0002-0289-1324
  • Roselló-Márquez, Gemma
  • Navarro Gázquez, Pedro José
[EN] Tungsten oxide (WO3) and zinc oxide (ZnO) are n-type semiconductors with numerous applications in photocatalysis. The objective of this study was to synthesize and characterize different types of nanostructures (WO3, WO3-Mo, TiO2, and TiO2-ZnO) for a comparison of hybrid and pure nanostructures to use them as a photoanodes for photoelectrocatalytic degradation of emerging contaminants. With the aim of comparing the properties of both samples, field emission scanning electron microscopy (FE-SEM) and confocal laser-Raman spectroscopy were used to study the morphology, composition, and crystallinity, respectively. Electrochemical impedances, Mott-Schottky, and water splitting measurements were performed to compare the photoelectrochemical properties of photoanodes. Finally, the photoelectrocatalytic degradation of the pesticide Imazalil was carried out with the best optimized nanostructure (TiO2-ZnO)., This research was funded by AEI (PID2019-105844RB-I00/AEI/10.13039/501100011033) and the project co-funded by FEDER operational program 2014¿2020 of Comunitat Valenciana (IDIFEDER/18/044). M.C.-H. received financial support from Ministerio de Universidades of the predoctoral grant (FPU19/02466). G.R.-M. received financial support from the UPV of a post-doctoral grant (PAID-10-21). P.J.N.-G. received support thanks the grant PEJ2018-003596-A-AR funded by MCIN/AEI/10.13039/501100011033. Finally, project co-funded by FEDER operational programme 2014-2020 of Comunitat Valenciana (IDIFEDER/18/044) is acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Degradation of Methylparaben Using Optimal WO3 Nanostructures: Influence of the Annealing Conditions and Complexing Agent

  • Cifre-Herrando, Mireia|||0000-0002-8800-3585
  • García-García, D.M.|||0000-0001-8951-4558
  • Garcia-Anton, Jose|||0000-0002-0289-1324
  • Roselló-Márquez, Gemma
[EN] In this work, WO3 nanostructures were synthesized with different complexing agents (0.05 M H2O2 and 0.1 M citric acid) and annealing conditions (400 degrees C, 500 degrees C and 600 degrees C) to obtain optimal WO3 nanostructures to use them as a photoanode in the photoelectrochemical (PEC) degradation of an endocrine disruptor chemical. These nanostructures were studied morphologically by a field emission scanning electron microscope. X-ray photoelectron spectroscopy was performed to provide information of the electronic states of the nanostructures. The crystallinity of the samples was observed by a confocal Raman laser microscope and X-ray diffraction. Furthermore, photoelectrochemical measurements (photostability, photoelectrochemical impedance spectroscopy, Mott-Schottky and water-splitting test) were also performed using a solar simulator with AM 1.5 conditions at 100 mW center dot cm(-2). Once the optimal nanostructure was obtained (citric acid 0.01 M at an annealing temperature of 600 degrees C), the PEC degradation of methylparaben (C-O 10 ppm) was carried out. It was followed by ultra-high-performance liquid chromatography and mass spectrometry, which allowed to obtain the concentration of the contaminant during degradation and the identification of degradation intermediates. The optimized nanostructure was proved to be an efficient photocatalyst since the degradation of methylparaben was performed in less than 4 h and the kinetic coefficient of degradation was 0.02 min(-1)., Authors would like to express their gratitude for the financial support to the Ministerio de Ciencia e Innovacion (Project code: PID2019-105844RB-I00/AEI/10.13039/501100011033) in the acquisition of Laser Raman Microscope (UPOV08-3E-012). M. Cifre-Herrando thanks Ministerio de Universidades for the concession of the predoctoral grant (FPU19/02466) and Gemma Rosello-Marquez also thanks the UPV for the concession of a post-doctoral grant (PAID-10-21). Finally, authors wish to thank to project co-funded by FEDER operational programme 2014-2020 of Comunitat Valenciana (IDIFEDER/18/044) for the financial funding.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of the Complexing Agent on the Synthesis of WO3 Nanostructures for Energy Storage Applications

  • Roselló-Márquez, Gemma
  • García-García, D.M.|||0000-0001-8951-4558
  • Cifre-Herrando, Mireia|||0000-0002-8800-3585
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] Nowadays, energy problems have become one of our society¿s biggest challenges and have drawn worldwide attention. Rechargeable lithium-ion batteries (LIBs) are a good option to solve these problems thanks to their high energy density and good cycle stability. However, much effort has recently been devoted to find alternative anode materials and replace graphite in LIBs, like tungsten oxide (WO3) which has attracted much interest as an anode due to its excellent properties. In this work, a simple method is used to synthesize crystalline WO3 nanostructures, with well-defined morphology using an electrochemical procedure known as electrochemical anodization. This method presents several advantages such as being a simple procedure and easy to control its parameters. During the anodization, two different complexing agents (oxygen peroxide and citric acid) were used. The effect of each complexing agent on the anode behaviour of nanostructures in lithium-ion batteries has been evaluated. On the one hand, Field Emission Scanning Electron Microscopy (FE-SEM) has been used to study the morphology of the samples, Raman Spectroscopy technique has been employed to verify the composition and crystallinity of the nanostructures and Electrochemical Impedance Spectroscopy (EIS) was performed to study their electrochemical properties. Finally, the different samples were applied as an anode for energy storage in Li-ion batteries and their specific capacity was evaluated by Cyclic Voltammetry (CV), Electrochemical Impedance Spectroscopy (EIS) and Charge-Discharge curves. The nanostructures that presented better electrochemical properties and superior behaviour as anode in lithium-ion batteries were those synthesized with H2O2 as a complexing agent. This sample presents lower resistance to charge transfer and better behaviour during the cycling process, their specific capacity values during discharge and charge 318 mAh·g-1 and 310 mAh·g-1, respectively., Authors would like to express their gratitude to AEI (PID2019-105844RB-I00/ AEI/10.13039/501100011033) for the financial support. M. Cifre-Herrando thank Ministerio de Universidades for the concession of the pre-doctoral grant (FPU19/02466). G. Roselló-Márquez also thanks the UPV for the concession of a post-doctoral grant (PAID-10-21) and for the grant to promote postdoctoral research at the UPV (PAID.-PD-22). Finally, project cofunded by FEDER operational programme 2014-2020 of Comunitat Valenciana (IDIFEDER/18/044) is acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of Solvent on the Photoelectrochemical Performance of WO3 Nanostructures for Hydrogen Evolution

  • Cifre-Herrando, Mireia|||0000-0002-8800-3585
  • Garcia-Anton, Jose|||0000-0002-0289-1324
  • Roselló-Márquez, Gemma
[EN] Hydrogen has emerged as a pivotal energy carrier for a sustainable future, and photoelectrocatalytic (PEC) water splitting presents a promising method for its production using semiconductor materials. Tungsten trioxide (WO¿) is a potential photoanode for PEC water splitting, but its performance is often hindered by poor charge separation, material stability, and low efficiency. This study investigates the effect of solvent additives during the synthesis of WO¿ nanostructures via anodization, focusing on isopropanol and formamide. The impact of these solvents on the morphology and photoelectrochemical properties of the resulting WO¿ films was analyzed. Results indicate that water is the optimal solvent for synthesizing WO¿ nanostructures, yielding the highest photocurrent density (0.629 mA/cm²) and theoretical hydrogen production of 2.87 L H¿/h·m², significantly outperforming samples synthesized with isopropanol and formamide. The introduction of isopropanol and formamide significantly reduced the performance due to morphological and structural changes that hinder charge transport. Although hydrogen evolution was not directly measured, the enhanced photocurrent suggests improved potential for solar water splitting applications. These findings provide insights into optimizing WO¿based photoanodes for enhanced hydrogen production, contributing to sustainable energy solutions., Authors would like to express their gratitude to AEI (PID2019-105844RB-I00/ AEI/10.13039/501100011033) for the financial support. M. Cifre-Herrando thank Ministerio de Universidades for the concession of the pre-doctoral grant (FPU19/02466). G. Roselló-Márquez also thanks the UPV for the concession of a post-doctoral grant (PAID-10-21) and the grant for the promotion of postdoctoral research at UPV (PAID-PD-22). Finally, project co-funded by FEDER operational programme 2014-2020 of Comunitat Valenciana (IDIFEDER/18/044) is acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Is photoelectrocatalysis an efficient process to degrade endocrine disruptors chemicals?

  • Cifre-Herrando, Mireia|||0000-0002-8800-3585
  • Garcia-Anton, Jose|||0000-0002-0289-1324
  • Roselló-Márquez, Gemma
[EN] Endocrine disruptors chemicals (EDCs) pose significant health risks, including cancer, behavioral disorders, and infertility. In this study, we employed the photoelectrocatalysis (PEC) technique with optimized tungsten oxide (WO3) nanostructures as a photoanode to degrade three diverse EDCs: methiocarb, dimethyl phthalate, and 4- tert-butylphenol. PEC degradation tests were carried out for individual contaminants and a mixture of them, assessing efficiency across different EDC families. Ultra High-Performance Liquid Chromatography and Mass Spectrometry was used to control the course of the experiments. For individual solutions, 4-tert-butylphenol and methiocarb were 100% degraded at 1 hour of PEC degradation. Among the tested EDCs, dimethyl phthalate showed the highest resistance to degradation when treated individually. However, when assessed in a mixture with the other EDCs, the degradation efficiency of dimethyl phthalate increased compared to its individual treatment. Furthermore, four degradation intermediates were identified for each contaminant. Finally, toxicity tests revealed that the initial solution was more toxic than the samples treated for all the contaminants tested, except for the phthalate., Authors would like to express their gratitude for the financial support to the Ministerio de Ciencia e Innovacion ¿ (Project code: PID2019- 105844RB-I00/AEI/10.13039/501100011033). M. Cifre-Herrando thanks Ministerio de Universidades for the concession of the predoctoral grant (FPU19/02466) and Gemma Rosello-Marquez also thanks the UPV for the concession of a post-doctoral grant (PAID-10 21) and for the grant to promote postdoctoral research at the UPV (PAID-PD-22). Finally, authors wish to thank to project co-funded by FEDER operational programme 2014 2020 of Comunitat Valenciana (IDIFEDER/18/044) for the financial funding.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Original Approach to Synthesize TiO2/ZnO Hybrid nanosponges used as photoanodes for photoelectrochemical applications

  • Navarro-Gázquez, Pedro José
  • Sánchez-Tovar, Rita
  • Fernández-Domene, Ramón Manuel
  • Muñoz-Portero, María-José|||0000-0002-7407-2598
  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] In the present work, TiO2/ZnO hybrid nanosponges have been synthesized for the first time. First, TiO2 nanosponges were obtained by anodization under hydrodynamic conditions in a glycerol/water/NH4F electrolyte. Next, in order to achieve the anatase phase of TiO2 and improve its photocatalytic behaviour, the samples were annealed at 450 degrees C for 1 h. Once the TiO2 nanosponges were synthesized, TiO2/ZnO hybrid nanosponges were obtained by electrodeposition of ZnO on TiO2 nanosponges using different temperatures, times, and concentrations of zinc nitrate (Zn(NO3)(2)). TiO2/ZnO hybrid nanosponges were used as photoanodes in photoelectrochemical water splitting tests. The results indicate that the photoelectrochemical response improves, in the studied range, by increasing the temperature and the Zn(NO3)(2) concentration during the electrodeposition process, obtaining an increase in the photoelectrochemical response of 141% for the TiO2/ZnO hybrid nanosponges electrodeposited at 75 degrees C with 10 mM Zn(NO3)(2) for 15 min. Furthermore, morphological, chemical, and structural characterization was performed by Field Emission Scanning Electron Microscopy (FE-SEM) with Energy Dispersive X-Ray spectroscopy (EDX), Raman Confocal Laser Spectroscopy, X-Ray Photoelectron Spectroscopy (XPS), and Grazing Incidence X-Ray Diffraction (GIXRD)., The authors would like to express their gratitude for the financial support of the Agencia Estatal de Investigación (PID2019-105844RB-I00/MCIN/AEI/10.13039/501100011033), for the co-finance by the European Social Fund, and for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012). Pedro José Navarro Gázquez also thanks the Grant PEJ2018-003596-A-AR funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Electropolymerization of PPy, PEDOT, and PANi on WO3 nanostructures for high-performance anodes in Li-ion batteries

  • Roselló-Márquez, Gemma
  • García-García, D.M.|||0000-0001-8951-4558
  • Cifre-Herrando, Mireia|||0000-0002-8800-3585
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] In this research work, four distinct WO3 electrodes were synthesized and coated with three different polymers, known as polypyrrole (PPy), poly(3,4-ethylenedioxythiophene) in poly(4-styrenesulfonate) (PEDOT:PSS) and polyaniline (PANi), using electropolymerization techniques. The morphological features of the samples were thoroughly characterized through Field Emission Scanning Electron Microscopy (FE-SEM) and Atomic Force Microscopy (AFM) analyses. Additionally, contact angle measurements and electrochemical characterizations were used to verify the performance of each electrode, aiding in the prediction of their suitability for energy storage applications in lithium-ion batteries. The electrodes were subsequently employed as anodes in lithium-ion batteries, and charge-discharge cycles were performed to analyze its specific capacity, and the Electrochemical Impedance Spectroscopy (EIS) technique was employed to analyze its behavior both before and after cycling. The results revealed superior performance for WO3 electrodes with PEDOT:PSS coating electropolymerized during 100 min at 0.4 mA. This comprehensive investigation not only sheds light on the synthesis and morphological characteristics of WO3 electrodes but also highlights the crucial role of PEDOT:PSS in enhancing electrochemical behavior for efficient energy storage applications., The authors wish to thank the economic support granted by AEI (PID2019-105844RB-I00/AEI/10.13039/501100011033). G. Rosello-Marquez is also grateful to UPV for the post-doctoral grant (PAID-10-21) and the grant to support postdoctoral research at UPV (PAID-PD-22), as well as to Generalitat Valenciana for the research stays in centers located outside the Valencian Community (CIBEST 2022). M. Cifre-Herrando acknowledges the Ministerio de Universidades for the pre-doctoral grant (FPU19/02466).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Facile preparation of electrodes based on WO3 nanostructures modified with C and S used as anode materials for Li-ion batteries

  • Roselló-Márquez, Gemma
  • García-García, D.M.|||0000-0001-8951-4558
  • Cifre-Herrando, Mireia|||0000-0002-8800-3585
  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] An appropriate morphological and structure matrix configuration where lithium ions could insert and de-insert is essential for lithium-ion batteries (LiB). Tungsten oxides (WO3) are especially attractive materials for this aim. In this research, the effects of the morphology and composition of WO3 nanostructures on the charge/discharge behavior for Li-ion batteries are methodically examined. On the one hand, nanostructured WO3 thin film was effectively synthesized by an electrochemical procedure. Then, an annealing treatment at 600°C in air environment for 4 h was carried out. In the second electrode synthesized, a carbon layer was uniformly deposited on WO3 nanostructures to obtain a WO3/C electrode. Finally, WO3/WS2 electrodes were prepared by means of in situ sulfurization of WO3 one-step solid-state synthesis using tungsten trioxide (WO3) and thiourea as precursor material. By using X-ray photoelectron spectroscopy, X-ray diffraction analysis, transmission electron microscopy, Raman spectra, and field-emission scanning electron microscopy, the three electrodes have been morphologically characterized. Electrochemical properties were analyzed by cyclic voltammogram, galvanostatic charge/discharge cycling, and electrochemical impedance spectroscopy. Among all the synthesized samples, WO3/C nanostructures reveal the best performance as they exhibit the greatest discharge capacity and cycle performance (820 mA h g¿1)., UPV for the concession of a postdoctoral, Grant/Award Number: PAID-10-21; Ministerio de Universidades for the concession of the predoctoral, Grant/Award Number: FPU19/02466; Comunitat Valenciana, Grant/Award Number: IDIFEDER/18/044
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Structural and electrochemical characterization of modified WO3 nanostructures for lithium-ion battery anodes

  • Cifre-Herrando, Mireia|||0000-0002-8800-3585
  • Garcia-Anton, Jose|||0000-0002-0289-1324
  • Roselló-Márquez, Gemma
[EN] This research explores the electrochemical performance of tungsten trioxide (WO3) nanostructures as anodes in lithium-ion batteries, with a focus on the impact of synthesis modifications. Three types of WO3 nanostructures have been synthesized: basic (B-WO3), isopropanol-modified (Isop-WO3), and molybdenum-doped (Mo-WO3). Characterization was performed using Field Emission Scanning Electron Microscopy, X-ray Diffraction, and X-ray Photoelectron Spectroscopy to analyze their structural and chemical properties. Electrochemical tests were carried out to the nanostructures, showing that modifications in the electrolyte composition significantly enhanced the electrochemical properties of WO3 nanostructures. Particularly, the incorporation of isopropanol and molybdenum into the synthesis process led to nanostructures with increased donor density and enhanced electrical conductivity, thereby improving the overall electrochemical performance of the nanostructures. Finally, lithium-ion batteries were fabricated using the nanostructures as anode and their performance was evaluated. Electrochemical assessments included Cyclic Voltammetry, Electrochemical Impedance Spectrocopy and Charge-Discharge tests. The hybrid Mo-WO3 nanostructure exhibited the best performance, showing lower charge transfer resistance and greater structural stability, attributed to molybdenum's beneficial effects. These findings suggest that tailored nanostructure synthesis can significantly enhance lithium-ion battery efficiency, contributing to the progression of advanced energy storage solutions., The authors wish to thank the economic support granted by Ministerio de Ciencia e Innovacion (PID2019-105844RB-I00/AEI/10.13039/501100011033) . M. Cifre-Herrando acknowledges the Ministerio de Universidades for the pre-doctoral grant (FPU19/02466) . G. Rosello -Marquez is also grateful to UPV for the post-doctoral grant (PAID-10-21) and the grant to support postdoctoral research at UPV (PAID-PD-22) . The authors wish to thank the project co-funded by the FEDER operational program 2014-2020 of the Comunitat Valenciana (IDIFEDER/18/044) for the financial funding. Additionally, funding from the Spanish Research Network E3TECH-PLUS (RED2022-134552-T, MICINN/AEI) is acknowledged.