Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 31
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Application of laser backscattering imaging for the physico-chemical characterisation of antimicrobial silica particles functionalised with plant essential oils

  • Verdú-Amat, Samuel|||0000-0002-3910-4582
  • Pérez Jiménez, Alberto José|||0000-0001-9059-0128
  • Barat Baviera, José Manuel|||0000-0001-8487-7114
  • Grau Meló, Raúl|||0000-0002-0540-5539
  • Ruiz Rico, María
[EN] The capacity of orthogonal imaging applied to laser-backscattering for characterising antimicrobial particles based on immobilised essential oils was tested. Different particles were synthesised using various particle and oils. Samples were characterised physico-chemically and by an imaging technique. The technique recorded the generated patterns because of the laser-particles interaction during the sedimentation process. The series of images were transformed into an orthogonal image. Data extraction varied depending on the fragmentation degree of image length. After the multivariate analysis, the physico-chemical results showed variability due to particle size. That variability diminished the effect of oils for large sizes. The imaging data collected these properties, which could be used to recognise both particle size and oil type. Thus the prediction of the properties was successful. The position in the physico-chemical space of variance was also predicted. Hence this technique could complement a low-cost method to evaluate the properties of functionalised particles with oils., The authors gratefully acknowledge the financial support from the University Polytechnic of Valencia for Programme "Ayudas para la Contratacion de Doctores para el Acceso al Sistema Espanol de Ciencia, Tecnologia e Innovacion, en Estructuras de Investigacion de la UPV (PAID-10-17)", "Generalitat Valenciana" for their postdoctoral fellowship (APOSTD/2019/118) and the Ministerio de Ciencia, Innovacion y Universidades, the Agencia Estatal de Investigacion and FEDER-EU (Project RTI2018-101599-B-C21).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Impact of the tiger-nut milk co-product on fibre-enriched bread processing and storage: crumb structure-moisture-texture relationships

  • Verdú-Amat, Samuel|||0000-0002-3910-4582
  • Barat Baviera, José Manuel|||0000-0001-8487-7114
  • Grau Meló, Raúl|||0000-0002-0540-5539
  • Alava, Cecibel
  • Carrascosa, Conrado
[EN] The effect of including tiger-nut milk co-product on the bread-making process was studied. The impact of three wheat flour substitution co-product levels (5%, 10% and 20%) was tested by comparing to a control (pure wheat) as regards fermentation kinetics and baking phase, as well as their implications on the physicochemical features of breads (crumb internal structure, moisture and texture distribution) just after processing and during storage. The dough fermentation kinetics showed significant differences: reducing maximum height at 60 min and maximum growth rate with an increasing co-product concentration. However, water retention in baking was the same for them all despite their differences in volume. These facts significantly affected the crumb internal structure, which was successfully characterised by an image analysis technique. Crumb moisture-structure-texture relationships were analysed in two different zones of cross-section bread slices. The results showed how an increasing co-product level enhanced the homogenization of moisture distribution and hardness across crumb zones, and also reduced the structure differences between them. Moisture and hardness presented high correlation levels with changes in the structure of crumb zones during storage, which allowed the significant effect of co-product on the crumb moisture-structure-texture relationships to be knownin both the bread-making process and storage time., This study was supported by the Regional Valencian Ministry of Culture, Education and Sport for Scientific and Technological Politics by Project entitled "Use of non-wheat flours, from co-products of the food industry, to produce bread, cakes and snacks (AICO/2015/107)" and by the University Polytechnic of Valencia by program "Ayudas para la Contratacin de Doctores para el Acceso al Sistema Espanol de Ciencia, Tecnologia e Innovacion, en Estructuras de Investigacion de la UPV (PAID-10-17)".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Research and practice on masonry cross vaults A review

  • Bertolesi, Elisa
  • Rinaudo, Paula
  • Adam, Jose M|||0000-0002-9205-8458
  • Calderón García, Pedro Antonio|||0000-0002-9783-9333
[EN] Masonry cross vaults, which began to be built in Europe in the times of the Roman Empire and reached heights of extraordinary splendor during the Gothic Period, are part of an impressive architectural heritage, which stand in need of evaluation, maintenance and repairs or renovation. Nowadays, the requirements of preservation and conservation of the historical heritage call for a strategy oriented on the description of the structural behaviour from different characteristic perspectives without neglecting the functional, architectonic and structural features. The present paper is intended to discuss the different research approaches adopted by several authors during the past and to show how numerical simulations in conjunction with experimental studies can provide the tools for the quantification of the damages produced by a variety of different critical events. To this scope, this paper includes an extensive and somewhat ambitious review, dealing with a wide variety of aspects, such as: (a) a bibliometric study, (b) classification of the types of cross vaults, (c) structural behavior, (d) types of failures and damage, (e) numerical simulation, (f) experimental testing, (g) monitoring, and (h) retrofitting. The review is expected to be of great interest for architects and engineers working in the field of evaluating and retrofitting the architectural heritage, as well as to those researchers who would find it useful to have at hand in a single document the most important advances made in the field of masonry cross vaults in recent years., This work was carried out within the SIMAX Project (BIA2014-59036-R) financed by the Spanish Ministry for the Economy, Industry and Competitiveness. The authors wish to express their gratitude to the collaborators and participants of the SIMAX Project: Juan J. Moragues, Teresa M. Pellicer, Ignacio Paya-Zaforteza, Ignazio Floris, Manuel Buitrago, Benjamin Torres, Salvador Ivorra, David Bru, Michele Betti, Lorenzo Papini, Eugenio Pellis, Mercedes Gomez-Ferrer and Gabriele Milani. The first author (Elisa Bertolesi) would like to thank the Universitat Politecnica de Valencia for funding received for her postdoctoral grant (PAID-10-17).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Degradation of Diazinon based on photoelectrocatalytic technique using enhanced WO3 nanostructures: Mechanism and pathway

  • Roselló-Márquez, Gemma
  • Fernández-Domene, Ramón Manuel
  • Sánchez-Tovar, Rita
  • Cifre-Herrando, Mireia|||0000-0002-8800-3585
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] In this work, a resistant and toxic pesticide called diazinon was degraded through the photoelectrocatalysis (PEC) technique using tungsten oxide (WO3) nanostructures, applying an external bias of 1VAg/AgCl and simulated solar illumination. For this, WO3 nanostructures have been synthesized using electrochemical anodization in 0.05 M hydrogen peroxide and 1.5 M of different acidic electrolytes: H2SO4, CH4O3S or HNO3. Morphology, composition and crystallinity of the samples were evaluated through Field Emission Scanning Electron Microscopy (FE-SEM), Atomic Force Microscopy (AFM) and Raman Spectroscopy. Then, the photoelectrochemical properties of the samples were analyzed by Photo-Electrochemical Impedance Spectroscopy (PEIS). The conclusion obtained with these studies was that the nanostructures obtained in the CH4O3S-H2O2 electrolyte presented better photoelectrochemical behavior than the others. The degradation process was checked by UV-Visible, and through Ultra High-Performanc liquid Chromatography and Mass Spectrometry (UHPLC-Q-TOF/MS) the courses of the experiments have been controlled and five possible degradation intermediates have been identified. Finally, after 24 h of experiment, 90% degradation efficiency has been achieved, since it has been possible to decrease from 20 ppm to 2 ppm., Authors would like to show their gratitude for the financial support to the Ministerio de Ciencia e Innovacion (Project code: PID2019105844RB-I00) in the acquisition of Laser Raman Microscope (UPOV083E-012) and for the co-finance by the European Social Fund. Authors would also want to express thanks the Ministerio de Ciencia, Innovacion y Universidades (Project Code: CTQ2017-90659-REDT) and the Generalitat Valenciana for its support in the Atomic Force Microscope and UHPLC-Q-TOF/MS purchase (IDIFEDER/2018/044). Ramon M. Fernandez Domene also express gratitude to the Universitat Politecnica de Valencia (UPV) for the post-doctoral granting (PAID-10-17) and Gemma Rosello Marquez also thanks the Generalitat Valenciana for the pre-doctoral granting (ACIF/2018/159).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Novel Probes and Carriers to Target Senescent Cells

  • Lozano-Torres, Beatriz
  • Blandez, Juan F.
  • Sancenón Galarza, Félix|||0000-0002-5205-7135
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
Detecting senescent cells has become a task of increasing importance in recent years. The implication of cellular senescence in a variety of physiological processes as well as in various diseases is the main reason why potential diagnostic tools for senescent cells are sought. This chapter clearly and concisely addresses the discussion of the published tools (molecular based probes and nanocarriers) to carry out the diagnosis of senescent cells both in vitro and in vivo and in tissues. The comprehensive reading of this chapter will allow the reader to overview the advances in the area of the detection of cellular senescence using probes and carriers as diagnostic methods.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Large-Scale Tests on RC Purpose-Built Buildings for Improving Robustness

  • Buitrago, Manuel|||0000-0002-5561-5104
  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Adam, Jose M|||0000-0002-9205-8458
  • Mezquida-Alcaraz, Eduardo J.
[EN] Although recent years have been marked by a substantial research effort on the progressive collapse of steel as well as cast-in-place and precast concrete structures, the fact is that almost all studies are focused on reduced-scale tests, tests on isolated frame structures, tests on substructures or analytical and numerical analysis. Within this context, large-scale tests avoid size effects and allow all resisting mechanisms that a structure can develop after an initial-local failure to be studied. This paper presents the case of large-scale tests performed on two purpose-built buildings: one made of cast-in-place concrete and the other with precast concrete elements. In both cases, sudden column removal scenarios were considered for the robustness assessment of the structural system. The structures were provided with simple solutions to enhance the robustness and arrest progressive collapse initiated by the sudden failure of a column. The cast-in-place concrete building had two 3 m high floors, with 2 × 2 bays of 5 m span length. The total in-plan dimensions of the building were 10 × 10 m2. This building was subjected to sudden corner column failure scenarios with and without the presence of infill masonry walls. The precast concrete structure also had two 3 m high floors, with 3 × 2 bays of 5 m and 6 m span, respectively. The total in-plan dimensions of the building were 15 × 12 m2. This building was subjected to sudden column failure scenarios for three different tests, involving the removal of: a corner column, an edge column in a frame parallel to the direction of one-way hollow-core slabs, and an edge column in a frame perpendicular to the one-way slabs. This paper presents and discusses a summary of the results and outcomes of these studies., The work for the cast-in-place concrete building was carried out with the support of a 2017 Leonardo Grant for Researchers and Cultural Creators from the BBVA Foundation. The work for the precast concrete building was carried out with the funding received through grant BIA2017-88322-R-AR funded by MCIN/AEI/10.13039/501100011033 and ERDF A way of making Europe. This research also serves as the basis of a project (Endure) that has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (Grant Agreement No. 101000396). The authors would also like to express their gratitude to the Levantina, Ingeniería y Construcción S.L. (LIC) company for funding the construction of the building, and to the Generalitat Valenciana/Fons Social Europeu [APOSTD/2019/101], grant IJC2020-042642-I funded by MCIN/AEI/10.13039/501100011033 and by European Union NextGeneration EU/PRTR, and Universitat Politècnica de València [PAID-10-17] for funding received under different postdoctoral programs.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Photoelectrochemical removal of chlorfenvinphos by using WO3 nanorods: Influence of annealing temperature and operation pH

  • Fernández Domene, Ramón Manuel
  • Roselló-Márquez, Gemma
  • Sánchez Tovar, Rita
  • Lucas-Granados, Bianca
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] A visible-light driven photoelectrochemical degradation process has been applied to a solution polluted with the organophosphate insecticide chlorfenvinphos. Different WO3 nanosheets/nanorods have been used as photoanodes. These nanostructured electrodes have been fabricated by anodization of tungsten and, subsequently, they have been subjected to a thermal treatment (annealing). The combined influence of annealing temperature (400¿°C and 600¿°C) and operation pH (1 and 3) on the photoelectrocatalytic behavior of these nanorods has been examined through a statistical analysis. Morphological, structural and photoelectrochemical characterizations have also been carried out. The chlorfenvinphos degradation efficiency depended both on annealing temperature and, specially, operation pH. At pH 1 and using an annealing temperature of 600¿°C, chlorfenvinphos has been effectively degraded following pseudo-first order kinetics with a coefficient of 7.8¿×¿10¿3¿min¿1, and notably mineralized (more than 65% of Total Organic Carbon decrease)., Authors thank for the financial support to the Ministerio de Economia y Competitividad (Project Code: CTQ2016-79203-R), for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012) and for the co-finance by the European Social Fund. Ramon M. Fernandez Domene thanks the UPV for the concession of a post-doctoral grant (PAID-10-17) and Gemma Rosello Marquez also thanks the Generalitat Valenciana for the concession of a pre-doctoral grant (ACIF/2018/159)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Caenorhabditis elegans to Model the Capacity of Ascorbic Acid to Reduce Acute Nitrite Toxicity under Different Feed Conditions: Multivariate Analytics on Behavioral Imaging

  • Verdú-Amat, Samuel|||0000-0002-3910-4582
  • Pérez Jiménez, Alberto José|||0000-0001-9059-0128
  • Barat Baviera, José Manuel|||0000-0001-8487-7114
  • Talens Oliag, Pau|||0000-0001-7318-3336
  • Grau Meló, Raúl|||0000-0002-0540-5539
  • Carrascosa, Conrado
[EN] Nitrocompounds are present in the environment and human diet and form part of vegetables and processed meat products as additives. These compounds are related to negative impacts on human and animal health. The protective effect of ascorbic acid has been demonstrated by some biological systems as regards several nitrocompounds. This work focused on studying the possibility of modeling this effect on nitrite toxicity with the model Caenorhabditis elegans. The three factors studied in this work were ascorbic acid concentration, nitrite exposure concentration, and presence/absence of food. The protective effect was evaluated by scoring lethality and its impact on behavior by means of multivariate statistical methods and imaging analytics. The effects of nitrite and the influence of food availability were evidenced. Apart from increasing lethality, nitrite had disruption effects on movements. All the observed symptoms reduced when ascorbic acid was administered, and it diminished lethality in all cases. Ascorbic acid maintained nematodes' postural capacities. The results suggest that nitrites' nonspecific toxicity in C. elegans can be mitigated by ascorbic acid, as previously evidenced in other biological systems. Thus, our results reveal the ability of C. elegans to reproduce the known protective effect of ascorbic acid against nitrite., This study was supported by the University Polytechnic of Valencia by the program "Ayudas para la Contratacion de Doctores para el Acceso al Sistema Espanol de Ciencia, Tecnologia e Innovacion, en Estructuras de Investigacion de la UPV" (PAID-10-17).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Electro-responsive films containing voltage responsive gated mesoporous silica nanoparticles grafted onto PEDOT-based conducting polymer

  • García-Fernández, Alba|||0000-0002-8416-1674
  • Monreal-Trigo, Javier|||0000-0002-4067-1867
  • Alcañiz Fillol, Miguel|||0000-0002-4579-9210
  • Marcos Martínez, María Dolores|||0000-0001-7079-8589
  • Sancenón Galarza, Félix|||0000-0002-5205-7135
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
  • Lozano-Torres, Beatriz
  • Blandez, Juan F.
  • Soto Camino, Juan
  • Collazos-Castro, Jorge E.
[EN] The characteristics and electromechanical properties of conductive polymers together to their biocompatibility have boosted their application as a suitable tool in regenerative medicine and tissue engineering. However, conducting polymers as drug release materials are far from being ideal. A possibility to overcome this drawback is to combine conducting polymers with on-command delivery particles with inherent high-loading capacity. In this scenario, we report here the preparation of conduction polymers containing gated mesoporous silica nanoparticles (MSN) loaded with a cargo that is delivered on command by electro-chemical stimuli increasing the potential use of conducting polymers as controlled delivery systems. MSNs are loaded with Rhodamine B (Rh B), anchored to the conductive polymer poly(3,4-ethylenedioxythiophene) (PEDOT) doped with poly[(4-styrenesulfonic acid)-co-(maleic acid)], functionalized with a bipyridinium derivative and pores are capped with heparin (P3) by electrostatic interactions. P3 releases the entrapped cargo after the application of ¿640 mV voltage versus the saturated calomel electrode (SCE). Pore opening in the nanoparticles and dye delivery is ascribed to both (i) the reduction of the grafted bipyridinium derivative and (ii) the polarization of the conducting polymer electrode to negative potentials that induce detachment of positively charged heparin from the surface of the nanoparticles. Biocompatibility and cargo release studies were carried out in HeLa cells cultures., Alba Garcia-Fernandez, Beatriz Lozano-Torres contributed equally to this work. A. Garcia-Fernandez and B. Lozano-Torres are grateful to the "Ministerio de Economia y Competitividad" of the Spanish Government for her PhD fellowships. J. F. Blandez thanks the "Universitat Politecnica de Valencia" for his postdoctoral fellowship (PAID-10-17). The authors thank to the Spanish Government (Projects RTI2018-100910-B-C41 and RTI2018-101599-B-C22 (MCUI/AEI/FEDER, EU)) and the Generalitat Valencia (Project PROMETEO2018-024) for support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Electrochemical formation of novel TiO2-ZnO hybrid nanostructures for photoelectrochemical water splitting applications

  • Sánchez Tovar, Rita
  • Fernández Domene, Ramón Manuel
  • Villanueva-Pascual, M.
  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] In this study, hybrid ZnO-TiO2 nanostructures have been synthesised by means of a simple electrochemical anodisation of titanium and subsequently ZnO electrodeposition. The influence of Zn(NO3)(2) concentration and temperature during the electrodeposition process was evaluated. Different techniques were used to analyse the synthesised nanostructures, notably Field Emission Scanning Electron Microscopy (FE-SEM) with Energy-dispersive X-ray spectroscopy (EDX) and Confocal Microscopy with Raman spectroscopy coupled with an Atomic Force Microscope. Photoelectrochemical water splitting tests were also performed at the hybrid nanostructures. According to the results, the photoelectrochemical response of the specimens increases with the addition of ZnO, besides the hybrid nanostructures obtained at 25 degrees C and using a Zn(NO3)(2) concentration of 1 mM showed photocurrent densities 80% higher than the ones obtained for TiO2 nanotubes. Analysis of Variance of the data confirms the obtained results., Authors thank for the financial support to the Ministerio de Economía y Competitividad (Project Code: CTQ2016-79203-R), for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012) and for the co-finance by the European Social Fund. Authors also thank the Generalitat Valenciana for its financial support through the project: IDIFEDER/018/044 co-finance by the European Social Fund. Authors also thank to the UPV for the concession of a post-doctoral grant (PAID-10-17) to Ramón M. Fernández Domene.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A genetic algorithm for group formation in elderly communities

  • Alberola Oltra, Juan Miguel|||0000-0002-5486-5638
  • Del Val Noguera, Elena|||0000-0002-1279-3429
  • Julian, Vicente|||0000-0002-2743-6037
  • Araujo, Angelo
  • Novais, Paulo
[EN] Over the last few years, agent technology has proposed different approaches for the development of systems that support the formation and dynamic management of teams or groups. Following this idea, this paper proposes a model for group formation in elderly communities defining it as a Coalition Structure Generation Problem. Specifically, the proposal has been used to analyse which is the best way to organize older people into activity groups in elderly communities. The model parameters are physical requirements, preferences and social relationships, being the model able to learn from each execution and improve the future configurations. The results show near-optimal solutions to all proposed scenarios, beating greatly the computational time of CPLEX, and flexibility to deal with different scenarios and configurations., This work has been supported by COMPETE: POCI-01-0145-FEDER-007043 and FCT - Fundacao para a Ciencia e Tecnologia within the Project Scope: UID/CEC/00319/2013. A. Costa thanks the FCT - Fundacao para a Ciencia e Tecnologia the Post-Doc scholarship with the Ref. SFRH/BPD/102696/2014. This work is also partially supported by the MINECO/FEDER TIN2017-89156-R and the Post-Doc scholarship with the Ref. SP20170057.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Pharmacological senolysis reduces doxorubicin-induced cardiotoxicity and improves cardiac function in mice

  • Lerida-Viso, Araceli
  • Estepa-Fernández, Alejandra
  • Lozano-Torres, Beatriz
  • Alfonso, María
  • Blandez, Juan F.
  • Bisbal, Viviana
  • Sepúlveda, Pilar
  • Orzáez, Mar
  • Morella-Aucejo, Ángela|||0000-0002-6357-949X
  • García-Fernández, Alba|||0000-0002-8416-1674
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
[EN] Many anticancer agents used in clinics induce premature senescence in healthy tissues generating accelerated aging processes and adverse side-effects in patients. Cardiotoxicity is a well-known limiting factor of anticancer treatment with doxorubicin (DOX), a very effective anthracycline widely used as antitumoral therapy in clinical practice, that leads to long-term morbidity and mortality. DOX exposure severely affects the population of cardiac cells in both mice and human hearts by inducing premature senescence, which may represent the molecular basis of DOX-induced cardiomyopathy. Here, we demonstrate that senescence induction in the heart contributes to impaired cardiac function in mice upon DOX treatment. Concomitant elimination of senescent cells with the senolytic Navitoclax in different formulations produces a significant decrease in senescence and cardiotoxicity markers together with the restoration of the cardiac function in mice followed by echocardiography. These results evidence the potential clinical use of senolytic therapies to alleviate cardiotoxicities induced in chemotherapy-treated patients., R.M. laboratory members thank the financial support from the Spanish Government projects RTI2018-100910-B-C41 and RTI2018-101599-B-C22 (MCUI/FEDER, EU)) and the Generalitat Valenciana (project PROMETEO 2018/024). M.O. thanks the financial support from the Spanish Government project (PID2020-115048RB-I00) and the Generalitat Valenciana (project PROMETEO/2019/065). A. L-V. is grateful to the Instituto de Salud Carlos III for her Ph.D. i-PFIS grant (IFI17/00039). A.E-F. and B.L.-T thanks to the Spanish Government for their Ph.D. grant (FPU17/05454) and (FPU15/02707). J.B. thanks to the Instituto de Salud Carlos III for his Sara Borrell contract (CD19/00038). M.A. thanks her postdoctoral fellowship (PAID-10-17). The funders had no role in the design, data collection, decision to publish, or preparation of the manuscript. The authors thank Alberto Hernandez for confocal microscopy, Alicia Martinez for flow cytometry, and Laura Ramirez for genomics guidance. The authors thank for the use of Biorender.com.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Robustness of RC building structures with infill masonry walls: tests on a purpose-built structure

  • Buitrago, Manuel|||0000-0002-5561-5104
  • Calderón García, Pedro Antonio|||0000-0002-9783-9333
  • Adam, Jose M|||0000-0002-9205-8458
  • Bertolesi, Elisa
  • Juan Sagaseta
[EN] Structural robustness is a significant property towards improving resilience of buildings, i.e. enhance their ability to withstand and recover from extreme events which often can cause local damage and progressive collapse. It is widely accepted that robustness depends on the capacity of the structure to activate alternative load paths (ALPs) after the failure of load-bearing elements, e.g. columns. Early evidence during World War II showed that progressive collapse of some buildings was avoided by the presence of masonry infill walls. Subsequent studies focused on this effect for cases of sudden column removal although most of these studies were analytical, numerical and only looked at internal columns which are generally less vulnerable to accidental events compared to corner and edge columns. The aim of this study was to analyse how infill walls can improve the robustness of reinforced concrete (RC) buildings in corner columns failure scenarios. A purpose-built 3D two-storey full-scale RC building structure with infill masonry walls was tested. The contribution of masonry infill walls was analysed in terms of: i) load redistribution, ii) ALPs, and iii) Dynamic Amplification Factors (DAFs) to be applied in linear-static analyses. The test was highly monitored by 38 strain gauges, 38 LVDTs and 2 accelerometers to register the vertical and lateral response. The results showed that masonry infill walls had a significant influence on the structural response and activated the predominant ALPs at very small deflections., This work was carried out with the support of a 2017 Leonardo Grant for Researchers and Cultural Creators from the BBVA Foundation. The authors would also like to express their gratitude to the Levantina, Ingenieria y Construccion S.L. (LIC) company for funding the construction of the building, and to the Generalitat Valenciana/Fons Social Europeu [APOSTD/2019/101] and Universitat Politecnica de Valencia [PAID-10-17] for funding received under different postdoctoral programs.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Evaluation of the influence of food intake on the incorporation and excretion kinetics of mesoporous silica particles in C.elegans

  • Verdú-Amat, Samuel|||0000-0002-3910-4582
  • Barat Baviera, José Manuel|||0000-0001-8487-7114
  • Grau Meló, Raúl|||0000-0002-0540-5539
  • Ruiz Rico, María
[EN] The effect of the presence of food on the incorporation and excretion of silica particles was studied in this work using the biological model Caenorhabditis elegans and image analysis techniques. The experiment was based on two 24-hour phases: exposure and depuration. During exposure, nematodes were maintained for 24 h in liquid medium with silica particles, but some with and others without food. During depuration, nematodes were transferred to medium without particles. Nematodes were analysed by an image analysis in both phases to quantify the properties of particle distributions in nematodes' bodies with time. No differences were found in the proportion of nematodes carrying particles in the exposure phase when food was present. However in the depuration phase, lack of food generated a high proportion of particle carriers. Particle distribution properties were also similar in the exposure phase. Nevertheless, lack of food produced particle accumulation due to decelerated excretion because digestive tube relaxed under these conditions. Thus after the depuration phase, lack of food led particles to persist in digestive tubes. According to these results, intake of silica particles had no retention effects when a food flux was provided, but particles were not easily excreted when the food flux was interrupted., The authors gratefully acknowledge the financial support from the Universitat Polit`ecnica de Valencia by Programme "Ayudas para la Contratacion de Doctores para el Acceso al Sistema Espanol de Ciencia, Tecnologia e Innovacion, en Estructuras de Investigacion de la UPV (PAID-10-17)"and Ministerio de Ciencia, Innovacion y Universidades, the Agencia Estatal de Investigacion and FEDER-EU (Project RTI2018101599-B-C21).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Formation of ZnO nanowires by anodization under hydrodynamic conditions for photoelectrochemical water splitting

  • Batista-Grau, Patricia
  • Sánchez Tovar, Rita
  • Fernández Domene, Ramón Manuel
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] The present work studies the influence of hydrodynamic conditions (from 0 to 5000 rpm) during Zn anodization process on the morphology, structure and photoelectrocatalytic behavior of ZnO nanostructures. For this purpose, analysis with Confocal Laser-Raman Spectroscopy, Field Emission Scanning Electron Microscope (FE-SEM) and photoelectrochemical water splitting tests were performed. This investigation reveals that hydrodynamic conditions during anodization promoted the formation of ordered ZnO nanowires along the surface that greatly enhance its stability and increases the photocurrent density response for water splitting in a 159% at the 5000 rpm electrode rotation speed., Authors would like to express their gratitude for the financial support to the Generalitat Valenciana and to the European Social Fund within the subvention to improve formation and employability of technical and management staff of I + D (GJIDI/2018/A/) and for its financial support through the project: IDIFEDER/018/044. Authors also thank for the financial support to the Ministerio de Economia y Competitividad (Project Code: CTQ2016-79203-R), for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012) and for the cofinance by the European Social Fund. Ramon M. Fernandez Domene also thanks the UPV for the concession of a post-doctoral grant (PAID-10-17).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A renal clearable fluorogenic probe for in vivo ß-galactosidase activity detection during aging and senolysis

  • Rojas-Vázquez, Sara
  • Lozano-Torres, Beatriz
  • Galiana, Irene
  • Perez-Villalba, Ana
  • Martí-Rodrigo, Pablo
  • Palop, M. José
  • Domínguez, Marcia
  • Orzaez, Mar
  • Blandez, Juan F.
  • Fariñas, Isabel
  • García-Fernández, Alba|||0000-0002-8416-1674
  • Sancenón Galarza, Félix|||0000-0002-5205-7135
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
[EN] Accumulation of senescent cells with age leads to tissue dysfunction and related diseases. Their detection in vivo still constitutes a challenge in aging research. We describe the generation of a fluorogenic probe (sulfonic-Cy7Gal) based on a galactose derivative, to serve as substrate for beta-galactosidase, conjugated to a Cy7 fluorophore modified with sulfonic groups to enhance its ability to diffuse. When administered to male or female mice, beta-galactosidase cleaves the O-glycosidic bond, releasing the fluorophore that is ultimately excreted by the kidneys and can be measured in urine. The intensity of the recovered fluorophore reliably reflects an experimentally controlled load of cellular senescence and correlates with age-associated anxiety during aging and senolytic treatment. Interestingly, our findings with the probe indicate that the effects of senolysis are temporary if the treatment is discontinued. Our strategy may serve as a basis for developing fluorogenic platforms designed for easy longitudinal monitoring of enzymatic activities in biofluids. In vivo detection of cell senescence remains a challenge in aging research. This work introduces a novel fluorogenic probe for beta-Gal activity that is excreted in urine, providing a simple diagnosis method to estimate the systemic load of senescent cells during aging and senolytic interventions., We acknowledge the support of the Servicio Central de Soporte a la Investigacion Experimental of the Universitat de Valencia (SCSIE-UVEG). We are grateful to Biorender.com for the illustrations of mice used in the temporal scheme of the senolytic treatment in Figs. 5 and 6 (agreement number: IX264V4WHR). We thank Dr. D. Munoz-Espin for providing us with siRNAs for knock-down experiments and Dr. S. Gil for his assistance in NMR analysis. Work in the laboratory of R. M.-M was supported by grants from the Spanish Government (PID2021-126304OB-C41) and the Generalitat Valenciana (PROMETEO CIPROM/2021/007). Work in the laboratory of I.F. was supported by grants from the Spanish Government (PID2020-117937GB-I00, RED2018-102723-T, and CIBERNED CB06/05/ 0086) and Generalitat Valenciana (PROMETEO/2021/028). We also acknowledge the financial support from the Spanish Government (SAF2017-84689-R project MINECO/AEI/FEDER, UE) and the Generalitat Valenciana (project PROMETEO/2019/065) to M. O. A. P. V. was also founded by CITSAM (2021-283-001). S. R.-V. (FPU 16/03714) and B. L.-T. (FPU15/02707) were recipients of FPU predoctoral contracts from the Spanish Ministerio de Educacion; P. M-R. was the recipient of a predoctoral contract (LCF/BQ/DE18/11670015) from Fundacio la Caixa; J. F. B. was the recipient of a postdoctoral contract (PAID-10-17) of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effectiveness of Textile Reinforced Mortar (TRM) materials for the repair of full-scale timbrel masonry cross vaults

  • Bertolesi, Elisa
  • Torres Górriz, Benjamín
  • Adam, Jose M|||0000-0002-9205-8458
  • Calderón García, Pedro Antonio|||0000-0002-9783-9333
  • Moragues, Juan J|||0000-0001-8111-5480
[EN] This paper presents the experimental results obtained from tests on two masonry vaults reinforced by Textile Reinforced Mortar (TRM) materials subjected to monotonic and cyclic vertical settlements in one of their sup-ports. Two full-scale square masonry timbrel vaults were built in one of ICITECH's laboratories at the Universitat Politecnica de Valencia (Valencia, Spain) using the traditional Catalan layered-construction technique, with various layers of clay tiles arranged in two perpendicular masonry textures joined by lime and cement mortar joints. Due to their peculiar geometric and mechanical features, i.e. their high slenderness ratio, low tensile strength and high material heterogeneity, these structures are especially prone to damage from high-risk events such as soil settlement or seismic excitation. To evaluate their response to vertical support displacements, both vaults were pre-damaged by either vertical monotonic or cyclic settlements. They were then strengthened by a radial TRM strengthening configuration and re-tested until failure. A complex network of traditional and optical sensors was used to monitor displacements, deformation and the development of the cracking mechanism under both settlement conditions. The results obtained show that TRM materials can be used to effectively repair severely damaged masonry timbrel vaults, helping to partially restore the initial elastic stiffness, as well as doubling the vaults' elastic phase and ultimate displacements. In addition, TRM materials did not alter the stiffness degradation trend, although they had a strong effect on peak reaction degradation and failure modes. This investigation represents a valuable and unique source of information about the efficacy of TRM materials to repair full-scale pre-damaged masonry timbrel vaults., The authors wish to express their gratitude to the Spanish Ministry of Economy, Industry and Competitiveness for the funding provided through Project BIA 2014-59036-R, and also to LIC-Levantina Ingenieria y Construccion and the Grupo Mapei for their invaluable assistance. The first author (Elisa Bertolesi) would like to thank the Universitat Politecnica de Valencia for funding received for her postdoctoral grant (PAID-10-17).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

High Fundamental Frequency Quartz Crystal Microbalance (HFF-QCMD) Immunosensor for detection of sulfathiazole in honey

  • Cervera-Chiner, Lourdes|||0000-0002-6895-4957
  • Jiménez Jiménez, Yolanda|||0000-0003-4835-9007
  • Juan-Borras, María del Sol|||0000-0003-4774-9484
  • Arnau Vives, Antonio|||0000-0002-5709-1690
  • Escriche Roberto, Mª Isabel|||0000-0003-0180-0360
  • Montoya, Ángel
  • Pascual, Nuria
[EN] In this study, a piezoelectric immunosensor based on High Fundamental Frequency Quartz Crystal Microbalance (HFF-QCMD) technology was developed for detection of sulfathiazole in honey. The biorecognition was based on a competitive immunoassay in the conjugate-coated format, using monoclonal antibodies as specific im-munoreagents. The quantification of sulfathiazole was performed by building the corresponding calibration standard curve in diluted honey (1/140). Due to the competitive nature of the immunoassay, the standard curve showed a sigmoidal pattern with limits of detection (LOD) and quantification (LOQ) of 0.10 ¿g/kg and 2 ¿g/kg honey, respectively. The LOD reached by this immunosensor is 40¿50 times lower than those reported by other techniques for antibiotic detection. Moreover, this method requires minimum honey pre-treatment, making it faster and simpler than other methods. This immunosensor meets the precision and accuracy requirements established by SANCO guidelines, when sulfathiazole concentration in honey is not lower than 10 ¿g/kg. These findings could be the basis for reaching enough reliability for lower concentrations. Therefore, HFF-QCMD immunosensors can be considered a feasible alternative to current techniques for rapid and highly sensitive determination of sulfathiazole in honey with minimum sample preparation., The Spanish Ministry of Economy and Competitiveness, with FEDER-funds, has financially supported this work through the AGL 2013-48646-R project. Furthermore, authors are grateful for financial support from the European Social Fund and the Generalitat Valenciana for the PhD grant (Ayudas para la contratación de personal investigador en formación de carácter predoctoral) to Lourdes Cervera Chiner (ACIF/2016/132). The authors would also like to thank the Universitat Politècnica de València for the support provided for contracting Marisol Juan Borrás in the frame of PAID-10-17 (Ayuda para la contratación de acceso al Sistema Español de Ciencia, Tecnología e Innovación en Estructuras de Investigación).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A Parametric Computational Study of RC Building Structures under Corner-Column Removal Situations

  • Buitrago, Manuel|||0000-0002-5561-5104
  • Adam, Jose M|||0000-0002-9205-8458
  • Bertolesi, Elisa
  • Garzón-Roca, Julio
  • Sagaseta, Juan
[EN] Building progressive collapse is currently one of the hottest topics in the structural engineering field. Most of the research carried out to date on this topic has been focused on the structural analysis of the failure of one or more columns in a building to determine the Alternative Load Paths (ALPs) the structure can activate. Past research was mainly focused on extreme situations with high loads and large structural deformations and, to a lesser extent, research looked at lower loads used in design accidental situations, which requires a different set of assumptions in the analysis. This paper describes a study aimed at analysing accidental design situations in corner-column removal scenarios in reinforced concrete (RC) building structures and evaluating the available real ALPs in order to establish practical recommendations for design situations that could be taken into account in future design codes. A wide parametric computational analysis was carried out with advanced Finite Element (FE) models which the authors validated by full¿scale tests on a purpose¿built building structure. The findings allowed us to: (i) establish design recommendations, (ii) demonstrate the importance of Vierendeel action and (iii) recommend Dynamic Amplification Factors (DAFs) for design situations., This research was funded by Fundacion BBVA-Becas Leonardo a Investigadores y Creadores Culturales 2017; the Spanish Ministry of Economy, Industry and Competitiveness, grant number BIA2017-88322-R-AR; Generalitat Valenciana/Fons Social Europeu, grant number APOSTD/2019/101 and Universitat Politecnica de Valencia, grant number PAID-10-17. This work is also part of the project "Extension of theoretical models against progressive collapse for tall and supertall concrete buildings", funded by the Engineering Physical Science Research Council (EPSRC) of the UK as part of an Impact Acceleration Account (IAA) held at the University of Surrey (grant number EP/K008153/1), and a continuation of two research projects also funded by EPSRC of the UK (grant ref: EP/K503939 and grant ref: EP/K008153/1).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Photoelectrocatalyzed degradation of a pesticides mixture solution (chlorfenvinphos and bromacil) by WO3 nanosheets

  • Roselló-Márquez, Gemma
  • Fernández Domene, Ramón Manuel
  • Sánchez Tovar, Rita
  • García-Carrión, Sergio
  • Lucas-Granados, Bianca
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] A photoelectrocatalyst consisting of WO3 nanosheets or nanorods has been synthesized by electrochemical anodization under hydrodynamic conditions, and has been used for the degradation of two toxic pesticides: chlorfenvinphos and bromacil. Nanostructures have been characterized by FESEM and Raman spectroscopy. Photoelectrochemical degradation tests have been carried out both for individual pesticide solutions and for a mixture solution, and the concentration evolution with time has been followed by UV¿Vis spectrophotometry. For individual pesticides, pseudo-first order kinetic coefficients of 0.402 h¿1 and 0.324 h¿1 have been obtained for chlorfenvinphos and bromacil, respectively, while for the mixture solution, these kinetic coefficients have been 0.162 h¿1 and 0.408 h¿1. The change in behavior towards pesticide degradation depending on whether individual or mixture solutions were used might be indicative of a competitive process between the two pesticide molecules when interacting with the WO3 nanostructures surface or when approaching the semiconductor/electrolyte interface., Authors thank for the financial support to the Ministerio de Economia y Competitividad (Project Code: CTQ2016-79203-R), for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012) and for the co-finance by the European Social Fund. Ramon M. Fernandez Domene also thanks the UPV for the concession of a postdoctoral grant (PAID-10-17) and Gemma Rosello Marquez also thanks the Generalitat Valenciana for the concession of a pre-doctoral grant (ACIF/2018/159).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Toxicological implications of amplifying the antibacterial activity of gallic acid by immobilisation on silica particles: a study on C. elegans

  • Verdú-Amat, Samuel|||0000-0002-3910-4582
  • Pérez Jiménez, Alberto José|||0000-0001-9059-0128
  • Barat Baviera, José Manuel|||0000-0001-8487-7114
  • Talens Oliag, Pau|||0000-0001-7318-3336
  • Grau Meló, Raúl|||0000-0002-0540-5539
  • Ruiz Rico, María
[EN] Immobilisation of natural compounds on solid supports to amplify antimicrobial properties has reported successful results, but modifications to physico-chemical properties can also imply modifications from a toxicological viewpoint. This work aimed to study the immobilising process of gallic acid in the antibacterial activity of L. innocua and its toxicological properties in vivo using Caenorhabditis elegans. The experiment was based on obtaining the minimum bactericidal concentration for free and immobilised gallic acid by comparing lethality, locomotion behaviour, chemotaxis and thermal stress resistance on C.elegans at those concentrations. The results showed a lowering minimum bactericidal concentration and modifications to nematode responses. Increased lethality and velocity of movements was observed. Immobilisation increased the repellent effect of gallic acid with a negative chemotaxis index. Thermal stress resistance was also affected, with higher mortality for immobilised gallic acid compared to bare particles and free gallic acid. Thus despite evidencing a generalised increase in the toxicity of gallic acid in vivo, lowering the minimum bactericidal concentration allowed a bacterial reduction of 99 % with less than one third of mortality for the nematodes exposed to free gallic acid., The authors gratefully acknowledge financial support from the University Polytechnic of Valencia by programme "Ayudas para la Contratacion de Doctores para el Acceso al Sistema Espanol de Ciencia, Tecnologia e Innovacion, en Estructuras de Investigacion de la UPV (PAID-10-17)" and the Ministerio de Ciencia, Innovacion y Universidades, the Agencia Estatal de Investigacion and FEDER-EU (Project RTI2018-101599-B-C21).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Photoelectrocatalyzed degradation of organophosphorus pesticide fenamiphos using WO3 nanorods as photoanode

  • Roselló-Márquez, Gemma
  • Fernández Domene, Ramón Manuel
  • Sánchez Tovar, Rita
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] In this study, WO3 nanostructures were synthesized by the electrochemical anodization technique to use them on the degradation of persistent organic compounds such as the pesticide fenamiphos. The acids electrolyte used during the anodization were two different: 1.5 M H2SO4-0.05 M H2O2 and 1.5 M CH4O3S-0.05 M H2O2. Once the samples have been manufactured, they have been subjected to different tests to analyze the properties of the nanostructures. With Field Emission Scanning Electron Microscopy (FESEM) the samples have been examined morphologically, their composition and crystallinity has been studied through Raman Spectroscopy and their photoelectrochemical behaviour by Photoelectrochemical Impedance Spectroscopy (PEIS). Finally, degradation tests have been carried out using the technique known as photoelectrocatalysis (PEC). The conditions that were applied in this technique were a potential of 1 V-Ag/AgCI and simulated solar illumination. The degradation process was monitored by UV-Visible and High-Performance liquid Chromatography (HPLC) to control the course of the experiment. The nanostructures obtained with 1.5 M CH4O3S-0.05 M H2O2 electrolyte showed a better photoelectrochemical behaviour than nanostructures synthesized with 1.5 M H2SO4-0.05 M H2O2. The fenamiphos degradation was achieved at 2 h of experiment and the intermediate formation was noticed at 1 h of PEC experiment., Authors thank for the financial support to the Ministerio de Economia y Competitividad (Project Code: CTQ2016-79203-R; for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012) and for the co-finance by the European Social Fund). Authors would also like to thank the Ministerio de Ciencia, Innovacion y Universidades (Project Code: CTQ2017-90659-REDT) and the Generalitat Valenciana for its help in the Atomic Force Microscope acquisition (IDIFEDER/2018/044). Ramon M. Fernandez Domene also thanks the UPV for the concession of a post-doctoral grant (PAID-10-17) and Gemma Rosello Marquez also thanks the Generalitat Valenciana for the concession of a pre-doctoral grant (ACIF/2018/159).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Non-destructive control in cheese processing: Modelling texture evolution in the milk curdling phase by laser backscattering imaging

  • Verdú-Amat, Samuel|||0000-0002-3910-4582
  • Pérez Jiménez, Alberto José|||0000-0001-9059-0128
  • Barat Baviera, José Manuel|||0000-0001-8487-7114
  • Grau Meló, Raúl|||0000-0002-0540-5539
[EN] This study aim was to explore the laser backscattering imaging technique's capacity to model the curdling phase in cheese processing. To do so, three different formulas were studied by modifying solute concentration. Textural modifications to the matrix during curdling were characterised by viscosimetry and texture measurements depending on samples' liquid or solid state. This state changed by determining gelation to establish the limits for the liquid and solid phases. The process was also characterised by the imaging technique, which showed dependence on both solute concentration and enzymatic effect on both the previously observed phases. After following multivariate statistical procedures to reduce dimensionality, the imaging results revealed that solute concentration strongly influenced the variance that the imaging technique captured. It reduced the visibility of the phase change in the image parameters. After eliminating this influence, the evolution of the matrix across the liquid and solid phases was modelled. Data were divided into phases and used to successfully predict the matrix status in each phase by multivariate non-linear regression procedures. It was concluded that the laser backscattering imaging technique presented suitable properties to be used for non-destructive continuous curdling process monitoring during the cheese-making process., The authors gratefully acknowledge the financial support from the University Polytechnic of Valencia for Programme "Ayudas para la Contratacion de Doctores para el Acceso al Sistema Espanol de Ciencia, Tecnologia e Innovacion, en Estructuras de Investigacion de la UPV (PAID-10-17)"
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A full-scale timbrel cross vault subjected to vertical cyclical displacements in one of its supports

  • Torres Górriz, Benjamín
  • Bertolesi, Elisa
  • Calderón García, Pedro Antonio|||0000-0002-9783-9333
  • Moragues, Juan J|||0000-0001-8111-5480
  • Adam, Jose M|||0000-0002-9205-8458
[EN] Up-and-down cyclical displacement of supports-foundations, due for example to the presence of expansive soils, can affect the integrity of a structure and may even lead to its collapse. A recent study carried out at the ICITECH laboratories of the Universitat Politècnica de València analysed the effects of earth settlements on the behaviour of masonry cross vaults. One of the tests involved the construction and testing of a full-scale timbrel cross vault, one of whose supports was subjected to up-and-down vertical displacement cycles. The 4×4 m2 vault was composed of four 3.6 m diameter arches supporting a masonry web. Vertical displacements were applied to one of the supports by means of two synchronised mechanical jacks. The results of the tests provide valuable information to the scientific community, architects and engineers on the behaviour of timbrel cross vaults when one of their supports is subjected to cyclical movements., The authors wish to express their gratitude to the Spanish Ministry of Economy, Industry and Competitiveness for the funding provided through Project BIA 2014-59036-R, and also to LIC-Levantina Ingenieria y Construction and the Grupo Puma for their invaluable assistance. The second author (Elisa Bertolesi) would like to thank the Universitat Politecnica de Valencia for funding received for her postdoctoral grant (PAID-10-17).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influence of annealing conditions on the photoelectrocatalytic performance of WO3 nanostructures

  • Roselló-Márquez, Gemma
  • Fernández Domene, Ramón Manuel
  • Sánchez Tovar, Rita
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] Nanostructured WO3 photoanodes have been synthesized by electrochemical anodization under controlled hydrodynamic conditions in acidic media in the presence of 0.05 M H2O2. Subsequently, samples have been subjected to a thermal treatment (annealing) at different temperatures (400 degrees C, 500 degrees C and 600 degrees C) and under different gaseous atmospheres (air, N-2, Ar). The influence of these annealing conditions on the morphology, crystallinity, photoelectrochemical behavior and dopant chemistry of the different photoanodes has been investigated through Electronic Microscopy, Raman Spectroscopy, Photoelectrochemical Impedance Spectroscopy and Mott-Schottky analysis. In general, higher annealing temperatures resulted in samples with higher degrees of crystallinity, which in turn favored the transport of electron-hole pairs through the semiconducting photoanodes. Besides, an increase in annealing temperature implied higher densities of donor species within the samples structure, which can explain the observed enhancement in charge transfer. Annealing temperature was observed to have a more marked impact on the photoelectrocatalytic performance of WO3 nanostructures than the gaseous atmosphere., Authors thank for the financial support to the Ministerio de Economia y Competitividad (Project Code: CTQ2016-79203-R; for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012) and for the co-finance by the European Social Fund). Authors would also like to thank the Ministerio de Ciencia, Innovacion y Universidades (Project Code: CTQ2017-90659-REDT (MEIS/AEI)). Ramon M. Fernandez Domene also thanks the UPV for the concession of a postdoctoral grant (PAID-10-17) and Gemma Rosello Marquez also thanks the Generalitat Valenciana for the concession of a pre-doctoral grant (ACIF/2018/159).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A pH Study for the Degradation of Acetaminophen with Iron Oxide Nanostructures

  • Lucas-Granados, Bianca
  • Sánchez Tovar, Rita
  • Fernández Domene, Ramón Manuel
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] Nowadays, there is an increasing interest in the degradation of organic compounds in wastewater, since they are detrimental for the water quality. Different metal oxides have been studied as photocatalysts in the photoelectrocatalytic degradation of pharmaceutical products using UV light. Iron oxide nanostructures are a promising option in this field since their band gap (~ 2.1 eV, corresponding to ~590 nm) can absorb visible light, which in turn allows the degradation by using sunlight. Iron oxide nanostructures are known to be stable in alkaline solutions, but some organic compounds can vary their structure with pH. Then, a pH study is needed in order to stablish the optimum value to guarantee both the nanostructures and the organic molecule stability. In this work, acetaminophen (more known as paracetamol) is studied in different pH media (from pH 9 to pH 13) in order to evaluate the viability of iron oxide nanostructures as photocatalysts in the acetaminophen degradation process. Results showed that pH is a determinant parameter in the degradation process since the paracetamol UV-Vis spectrum varied with it. However, a pH compromise value is stablished in order to ensure the viability of the usage of iron oxide nanostructures in the acetaminophen degradation proces, The authors would like to express their gratitude for the financial support granted to Bianca Lucas Granados by the Ministerio de Economía y Competitividad (Reference: BES-2014-068713 and Project CTQ2016-79203-R), for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012) and for the co-finance by the European Social Fund, and to the UPV for the concession of a post-doctoral grant (PAID-10-17) to Ramón M. Fernández Domene.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Laser backscattering imaging as a non-destructive quality control technique for solid food matrices: Modelling the fibre enrichment effects on the physico-chemical and sensory properties of biscuits

  • Verdú-Amat, Samuel|||0000-0002-3910-4582
  • Barat Baviera, José Manuel|||0000-0001-8487-7114
  • Grau Meló, Raúl|||0000-0002-0540-5539
[EN] This work focused on modelling the effect of fibre enrichment on the physico-chemical and sensory properties of biscuits by an image analysis of laser backscattering patterns. The study was done on four formulas where, besides the control, three fibre enrichment levels were included (5%, 10% and 20% w/w). The impact on the physico-chemical and sensory properties of biscuits was characterised according to analyses of texture, thickness, area, mass increment, density, flux of solvents (water and milk), colour, taste, mouth texture, etc. Moreover, the image analysis was carried out to collect information from the interaction of a laser with two different biscuit production chain matrices: after the mixing and forming phase (doughs) and after baking (end biscuits). That information was obtained according to the image descriptors generated from the morphology of the observed laser patterns. Both studied matrices offered different, but complementary, information about isolating the variance produced by fibre enrichment for doughs, while the variance generated by heat treatment was also recorded for biscuits. The quantitative prediction of the physico-chemical and sensory properties of biscuits improved when combining both information blocks. The impact of fibre enrichment on biscuits can be modelled by this imaging technique, which could be the basis to develop new non-destructive systems for online inspections made during cookie processing to quickly and non-destructively report physico-chemical and sensory information., This study was supported by the Regional Valencian Ministry of Culture, Education and Sport for Scientific and Technological Politics by Project entitled Use of non-wheat flours, from co-products of the food industry, to produce bread, cakes and snacks (AICO/2015/107) and by the University Polytechnic of Valencia by program Ayudas para la Contratación de Doctores para el Acceso al Sistema Español de Ciencia, Tecnología e Innovación, en Estructuras de Investigación de la UPV (PAID-10-17)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Fresh-sliced tissue inspection: Characterization of pork and salmon composition based on fractal analytics

  • Verdú-Amat, Samuel|||0000-0002-3910-4582
  • Barat Baviera, José Manuel|||0000-0001-8487-7114
  • Grau Meló, Raúl|||0000-0002-0540-5539
[EN] The capability of fractal analytics of digital images for characterizing sliced tissue was tested in fat and water fractions terms. The study was based on three factors: tissue type (pork loin and salmon); fractal parameter (fractal dimension and lacunarity); image type in color terms (grayscale and RGB channels). After capturing images of tissue samples, the water and fat fractions were analyzed from each one. The fractal information was expressed as specific spectra from each image type, which were related with composition properties. The relationship between both data blocks was tested by multivariate regression assays. The results reported that fractal information collected the variability due to both composition and tissue morphology. Both fractal parameters and all the image types successfully reported the results. The two fractal parameters displayed a strong dependency on components, and both characterized sample properties. No considerable differences were found in the results for image type. However, the inclusion of the entire color spectra increased the observed coefficients. The idea presented here could be a simple rapid non destructive technique for characterizing tissue composition., This study was supported by the Universidad Politécnica de Valencia by program Ayudas para la Contratación de Doctores para el Acceso al Sistema Español de Ciencia, Tecnología e Innovación, en Estructuras de Investigación de la UPV (PAID-10-17)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Research data Set de datos (Dataset)

Degradation of Diazinon through photoelectrocatalytic technique with WO3 nanostructures [Dataset]

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Iron oxide nanostructures for photoelectrochemical applications: Effect of applied potential during Fe anodization

  • Lucas-Granados, Bianca
  • Sánchez Tovar, Rita
  • Fernández Domene, Ramón Manuel
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] In photoelectrochemistry, a suitable photoanode leading to high efficiencies in photocatalytic processes is a research challenge. Iron oxide nanostructures are promising materials to be used as photoanodes. In this work, different potentials during iron anodization were applied to study the properties of the synthesized nanostructures. Results revealed that nanostructures anodized at 50V presented well-defined nanotubular structures with open-tube tops, and they achieved values of photocurrent density of 0.11 mA cm(-2) at 0 rpm and 0.14 mA cm(-2) at 1000 rpm (measured at 0.50 V-Ag/Agcl), corresponding to the oxygen evolution reaction from water, i.e. 2H(2)O+4h(+)-> 4H(+)+O-2, demonstrating their good photoelectrochemical behavior., The authors would like to express their gratitude for the financial support granted to Bianca Lucas Granados by the Ministerio de Economia y Competitividad (Reference: BES-2014-068713 and Project CTQ2016-79203-R), for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012) and for the co-finance by the European Social Fund, and to the UPV for the concession of a post-doctoral grant (PAID-10-17) to Ramon M. Fernandez Domene.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A sensitive nanosensor for the in situ detection of the cannibal drug

  • Garrido-García, Eva María
  • Marcos Martínez, María Dolores|||0000-0001-7079-8589
  • Sancenón Galarza, Félix|||0000-0002-5205-7135
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
  • Alfonso-Navarro, María
  • Díaz de Greñu-Puertas, Borja
  • Costero, Ana M.
  • Gil Grau, Salvador
[EN] A bio-inspired nanodevice for the selective and sensitive fluorogenic detection of 3,4- methylenedioxypyrovalerone (MDPV), usually known as Cannibal drug, is reported. The sensing nanodevice is based on mesoporous silica nanoparticles (MSNs), loaded with a fluorescent reporter (rhodamine B) and functionalized on their external surface with a dopamine derivative (3), which specifically interacts with the recombinant human dopamine transporter (DAT), capping the pores. In the presence of MDPV, DAT detaches from the MSNs consequently causing rhodamine B release and allowing drug detection. The nanosensor shows a detection limit of 5.2 µM and it is able to detect the MDPV drug both in saliva and blood plasma samples., The authors thank the Spanish Government (projects RTI2018-100910-B-C41 (MCUI/AEI/FEDER, UE) and CTQ2017-87954-P) and the Generalitat Valencia (PROMETEO/2018/024) for support. E.G. is grateful to the Spanish MEC for her FPU grant. M.A. thanks her postdoctoral fellowship (PAID -10-17). The authors also thank the Electron Microscopy Service at the UPV for support.