Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Photoelectrochemical removal of chlorfenvinphos by using WO3 nanorods: Influence of annealing temperature and operation pH

  • Fernández Domene, Ramón Manuel
  • Roselló-Márquez, Gemma
  • Sánchez Tovar, Rita
  • Lucas-Granados, Bianca
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] A visible-light driven photoelectrochemical degradation process has been applied to a solution polluted with the organophosphate insecticide chlorfenvinphos. Different WO3 nanosheets/nanorods have been used as photoanodes. These nanostructured electrodes have been fabricated by anodization of tungsten and, subsequently, they have been subjected to a thermal treatment (annealing). The combined influence of annealing temperature (400¿°C and 600¿°C) and operation pH (1 and 3) on the photoelectrocatalytic behavior of these nanorods has been examined through a statistical analysis. Morphological, structural and photoelectrochemical characterizations have also been carried out. The chlorfenvinphos degradation efficiency depended both on annealing temperature and, specially, operation pH. At pH 1 and using an annealing temperature of 600¿°C, chlorfenvinphos has been effectively degraded following pseudo-first order kinetics with a coefficient of 7.8¿×¿10¿3¿min¿1, and notably mineralized (more than 65% of Total Organic Carbon decrease)., Authors thank for the financial support to the Ministerio de Economia y Competitividad (Project Code: CTQ2016-79203-R), for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012) and for the co-finance by the European Social Fund. Ramon M. Fernandez Domene thanks the UPV for the concession of a post-doctoral grant (PAID-10-17) and Gemma Rosello Marquez also thanks the Generalitat Valenciana for the concession of a pre-doctoral grant (ACIF/2018/159)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Controlled hydrodynamic conditions on the formation of iron oxide nanostructures synthesized by electrochemical anodization: Effect of the electrode rotation speed

  • Lucas-Granados, Bianca
  • Sánchez Tovar, Rita
  • Fernández Domene, Ramón Manuel
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] Iron oxide nanostructures are of particular interest because they can be used as photocatalysts in water splitting due to their advantageous properties. Electrochemical anodization is one of the best techniques to synthesize nanostructures directly on the metal substrate (direct back contact). In the present study, a novel methodology consisting of the anodization of iron under hydrodynamic conditions is carried out in order to obtain mainly hematite (alpha-Fe2O3) nanostructures to be used as photocatalysts for photoelectrochemical water splitting applications. Different rotation speeds were studied with the aim of evaluating the obtained nanostructures and determining the most attractive operational conditions. The synthesized nanostructures were characterized by means of Raman spectroscopy, Field Emission Scanning Electron Microscopy, photoelectrochemical water splitting, stability against photocorrosion tests, Mott-Schottky analysis,. Electrochemical Impedance Spectroscopy (EIS) and band gap measurements. The results showed that the highest photocurrent densities for photoelectrochemical water splitting were achieved for the nanostructure synthesized at 1000 rpm which corresponds to a nanotubular structure reaching similar to 0.130 mA cm(-2) at 0.54V (vs. Ag/AgCl). This is in agreement with the EIS measurements and Mott-Schottky analysis which showed the lowest resistances and the corresponding donor density values, respectively, for the nanostructure anodized at 1000 rpm., The authors would like to express their gratitude for the financial support to the Ministerio de Economia y Competitividad (Reference: BES-2014-068713, Project Code: CTQ2013-42494-R), for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012), for the co-finance by the European Social Fund and to Dr. Asuncion Jaime for her translation assistance
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Photoelectrocatalyzed degradation of organophosphorus pesticide fenamiphos using WO3 nanorods as photoanode

  • Roselló-Márquez, Gemma
  • Fernández Domene, Ramón Manuel
  • Sánchez Tovar, Rita
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] In this study, WO3 nanostructures were synthesized by the electrochemical anodization technique to use them on the degradation of persistent organic compounds such as the pesticide fenamiphos. The acids electrolyte used during the anodization were two different: 1.5 M H2SO4-0.05 M H2O2 and 1.5 M CH4O3S-0.05 M H2O2. Once the samples have been manufactured, they have been subjected to different tests to analyze the properties of the nanostructures. With Field Emission Scanning Electron Microscopy (FESEM) the samples have been examined morphologically, their composition and crystallinity has been studied through Raman Spectroscopy and their photoelectrochemical behaviour by Photoelectrochemical Impedance Spectroscopy (PEIS). Finally, degradation tests have been carried out using the technique known as photoelectrocatalysis (PEC). The conditions that were applied in this technique were a potential of 1 V-Ag/AgCI and simulated solar illumination. The degradation process was monitored by UV-Visible and High-Performance liquid Chromatography (HPLC) to control the course of the experiment. The nanostructures obtained with 1.5 M CH4O3S-0.05 M H2O2 electrolyte showed a better photoelectrochemical behaviour than nanostructures synthesized with 1.5 M H2SO4-0.05 M H2O2. The fenamiphos degradation was achieved at 2 h of experiment and the intermediate formation was noticed at 1 h of PEC experiment., Authors thank for the financial support to the Ministerio de Economia y Competitividad (Project Code: CTQ2016-79203-R; for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012) and for the co-finance by the European Social Fund). Authors would also like to thank the Ministerio de Ciencia, Innovacion y Universidades (Project Code: CTQ2017-90659-REDT) and the Generalitat Valenciana for its help in the Atomic Force Microscope acquisition (IDIFEDER/2018/044). Ramon M. Fernandez Domene also thanks the UPV for the concession of a post-doctoral grant (PAID-10-17) and Gemma Rosello Marquez also thanks the Generalitat Valenciana for the concession of a pre-doctoral grant (ACIF/2018/159).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

ZnO/ZnS heterostructures for hydrogen production by photoelectrochemical water splitting

  • Sánchez Tovar, Rita
  • Fernández Domene, Ramón Manuel
  • Sanz Marco, Arturo
  • Montañés, Maria-Teresa|||0000-0002-2620-6926
  • Garcia-Anton, Jose|||0000-0002-0289-1324
This work studies the photoelectrochemical behavior of novel ZnO/ZnS heterostructures obtained by means of anodization in water and glycerol/water/NH4F electrolytes with different Na2S additions under controlled hydrodynamic conditions. For this purpose different techniques such as Field Emission Scanning Electronic Microscopy (FE-SEM) with EDX, Raman spectroscopy and photoelectrochemical water splitting tests under standard AM 1.5 conditions have been carried out. The obtained results showed that the hydrodynamic conditions promoted an ordered nanotubular morphology which facilitates electron-hole separation and consequently, the photoelectrochemical activity for water splitting is enhanced. Additionally, the effect of glycerol in the anodization solutions seems to be beneficial for increasing the dark current photostability., The authors would like to express their gratitude for the financial support to the Ministerio de Economia y Competitividad (CTQ2013-42494-R), for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012), and for the co-finance by the European Social Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of Reynolds number on TiO2 nanosponges doped with Li+ cations

  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • Muñoz-Portero, María-José|||0000-0002-7407-2598
  • Garcia-Anton, Jose|||0000-0002-0289-1324
  • Sánchez Tovar, Rita
  • Fernández Domene, Ramón Manuel
[EN] Anatase TiO2 nanosponges have been synthesized by anodization of Ti, and Li+ cations have been inserted in these nanostructures. The influence of hydrodynamic conditions (Reynolds number, Re = 0 to Re = 600) during anodization has been studied. Li-Doped TiO2 nanosponges were characterized by field emission scanning electron microscopy (FE-SEM), Raman confocal microscopy, electrochemical impedance spectroscopy (EIS) and Mott¿Schottky analysis (M¿S). The photoelectrochemical performance and resistance to photocorrosion were also measured. Li¿TiO2 nanosponges proved to be better photocatalysts for water splitting than Li¿TiO2 nanotubes. Moreover, the photoelectrochemical behavior of the Li-doped nanosponges improved as the Reynolds number increased., The authors acknowledge the financial support from the Ministerio de Economia y Competitividad (Project Code: CTQ2016-79203-R) and its help in the Laser Raman Microscope acquisition (UPOV08-3E-012), and acknowledge co-funding by the European Social Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

TiO2 Nanostructures for Photoelectrocatalytic Degradation of Acetaminophen

  • Borràs-Ferrís, Joan
  • Sánchez Tovar, Rita
  • Fernández Domene, Ramón Manuel
  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • Muñoz-Portero, María-José|||0000-0002-7407-2598
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] Advanced oxidation processes driven by renewable energy sources are gaining attention in degrading organic pollutants in waste waters in an efficient and sustainable way. The present work is focused on a study of TiO2 nanotubes as photocatalysts for photoelectrocatalytic (PEC) degradation of acetaminophen (AMP) at different pH (3, 7, and 9). In particular, different TiO2 photocatalysts were synthetized by stirring the electrode at different Reynolds numbers (Res) during electrochemical anodization. The morphology of the photocatalysts and their crystalline structure were evaluated by field emission scanning electron microscopy (FESEM) and Raman confocal laser microscopy (RCLM). These analyses revealed that anatase TiO2 nanotubes were obtained after anodization. In addition, photocurrent densities versus potential curves were performed in order to characterize the electrochemical properties of the photocatalysts. These results showed that increasing the Re during anodization led to an enhancement in the obtained photocurrents, since under hydrodynamic conditions part of the initiation layer formed over the tubes was removed. PEC degradation of acetaminophen was followed by ultraviolet-visible absorbance measurements and chemical oxygen demand tests. As drug mineralization was the most important issue, total organic carbon measurements were also carried out. The statistical significance analysis established that acetaminophen PEC degradation improved as hydrodynamic conditions linearly increased in the studied range (Re from 0 to 600). Additionally, acetaminophen conversion had a quadratic behavior with respect to the reaction pH, where the maximum conversion value was reached at pH 3. However, in this case, the diversity of the byproducts increased due to a different PEC degradation mechanism., This research was funded by The Ministerio de Economia y Competitividad and cofinanced by the European Social Fund (CTQ2016-79203-R and UPOV08-3E-012).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Iron oxide nanostructures for photoelectrochemical applications: Effect of applied potential during Fe anodization

  • Lucas-Granados, Bianca
  • Sánchez Tovar, Rita
  • Fernández Domene, Ramón Manuel
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] In photoelectrochemistry, a suitable photoanode leading to high efficiencies in photocatalytic processes is a research challenge. Iron oxide nanostructures are promising materials to be used as photoanodes. In this work, different potentials during iron anodization were applied to study the properties of the synthesized nanostructures. Results revealed that nanostructures anodized at 50V presented well-defined nanotubular structures with open-tube tops, and they achieved values of photocurrent density of 0.11 mA cm(-2) at 0 rpm and 0.14 mA cm(-2) at 1000 rpm (measured at 0.50 V-Ag/Agcl), corresponding to the oxygen evolution reaction from water, i.e. 2H(2)O+4h(+)-> 4H(+)+O-2, demonstrating their good photoelectrochemical behavior., The authors would like to express their gratitude for the financial support granted to Bianca Lucas Granados by the Ministerio de Economia y Competitividad (Reference: BES-2014-068713 and Project CTQ2016-79203-R), for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012) and for the co-finance by the European Social Fund, and to the UPV for the concession of a post-doctoral grant (PAID-10-17) to Ramon M. Fernandez Domene.