Skip to main content

DESARROLLO DE FOTOANODOS CON NUEVAS NANOESTRUCTURAS DE OXIDOS METALICOS PARA LA PRODUCCION DE ENERGIA Y DESTRUCCION DE CONTAMINANTES CON LUZ SOLAR

CTQ2013-42494-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2013
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Formation of Hematite Nanotubes by Two-Step Electrochemical Anodization for Efficient Degradation of Organic Pollutants

  • Lucas-Granados, Bianca
  • Sánchez Tovar, Rita
  • Fernández Domene, Ramón Manuel
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] Nowadays, hematite (alpha-Fe2O3) has emerged as a promising photocatalyst for efficient degradation of organic pollutants due to its properties such as suitable band-gap (similar to 2.1 eV), stability against photocorrosion, abundance and low cost. However, some drawbacks such as low carrier mobility and short hole diffusion length limit its efficiency. In order to overcome these issues, self-ordered nanotubes can be synthetized. Anodization is one of the simplest and most economic techniques to produce nanostructures with high control. In the present study, self-ordered hematite nanotubes were synthetized by two-step electrochemical anodization. In two-step anodization, a first-step was actually a pretreatment to form well-ordered nanoporous template in which well-ordered nanotubes are grown by a second-step. The formed nanotubes were characterized by different methods such as Field Emission Scanning Microscopy and Raman spectroscopy to determine their morphology and crystalline structure, respectively. Furthermore, the obtained nanotubes were characterized by means of photocurrent density versus potential measurements (water splitting) to evaluate their efficiency as photocatalyst. Good results were obtained as the achieved photocurrent density was 0.079 mA cm(-2) at 0.58 V (vs. Ag/AgCl), which indicates that the nanotubes synthetized by two-step anodization are suitable photocatalysts for degradation of organic pollutants., The authors would like to express their gratitude for the financial support to the Ministerio de Economía y Competitividad (Reference: BES-2014-068713, Project Code: CTQ2013-42494-R), for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012), and for the co-finance by the European Social Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A simple method to fabricate high-performance nanostructured WO3 photocatalysts with adjusted morphology in the presence of complexing agents

  • Fernández Domene, Ramón Manuel
  • Sánchez Tovar, Rita
  • Lucas-Granados, Bianca
  • Roselló-Márquez, Gemma
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] The rich and complex chemistry of tungsten was employed to synthesize innovative WO3 nanoplatelets/nanosheets by simple anodization in acidic electrolytes containing different concentrations of complexing agents or ligands, namely F- and H2O2. The morphological and photoelectrochemical properties of these nanostructures were characterized. The best of these nanostructures generated stable photocurrent densities of ca. 1.8 mA cm(-2) at relatively low bias potentials (for WO3) of 0.7 V-Ag/AgCl under simulated solar irradiation, which can be attributed to a very high active surface area. This work demonstrates that the morphology and dimensions of these nanostructures, as well as their photoelectrochemical behavior, can be controlled by adjusting the ligand concentration in the electrolytes, hence providing an easy and non-expensive route to fabricate and customize high-performance nanostructured photocatalysts for clean energy production and environmental applications. (C) 2016 Elsevier Ltd. All rights reserved., Authors would like to express their gratitude for the financial support from the Ministerio of Economia y Competitividad (Project CTQ2013-42494-R), for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012) and for the co-financing by the European Social Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influence of the Heating Rate on the Annealing Treatment of Iron Oxide Nanostructures Obtained by Electrochemical Anodization under Hydrodynamic Conditions

  • Lucas-Granados, Bianca
  • Sánchez Tovar, Rita
  • Fernández Domene, Ramón Manuel
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] Iron oxide nanostructures are promising materials for photoelectrochemical applications such as water splitting. In this work, electrochemical anodization of iron is used to form different iron oxide nanostructures, and the influence of different anodization parameters was studied in order to find the most suitable nanostructure for photocatalysis applications. On the one hand, hydrodynamic conditions were evaluated by stirring the electrode at different rotation speeds during the electrochemical anodization to check their influence on the formation of the nanostructures. On the other hand, different heating rates during the annealing treatment were studied for obtaining efficient iron oxide nanostructures. The synthesized nanostructures were characterized by different techniques such as photocurrent density vs. potential measurements, Field Emission Scanning Electron Microscopy, Raman spectroscopy and Incident Photon-toelectron Conversion Efficiency (IPCE). The results revealed that the best heating rate during the annealing treatment is 15 ºC·min-1 and that the hydrodynamic conditions allow the formation of nanotubular iron oxide structures achieving ~0.1 mA·cm-2 at 0.5 V (vs. Ag/AgCl) in the water splitting measurements. Moreover, all the nanostructures are mainly composed by hematite (¿-Fe2O3) with some amount of magnetite (Fe3O4) in their structure. Finally, the IPCE measurements showed that the best rotation speed during the electrochemical anodization for the formation of an efficient iron oxide nanostructure for photocatalysis applications is 1,000 rpm., The authors would like to express their gratitude for the financial support to the Ministerio de Economía y Competitividad (Reference: BES-2014-068713, Project Code: CTQ2013-42494-R), for its help in the Laser Raman Confocal Microscope acquisition (UPOV08-3E-012), and for the co-finance by the European Social Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Controlled hydrodynamic conditions on the formation of iron oxide nanostructures synthesized by electrochemical anodization: Effect of the electrode rotation speed

  • Lucas-Granados, Bianca
  • Sánchez Tovar, Rita
  • Fernández Domene, Ramón Manuel
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] Iron oxide nanostructures are of particular interest because they can be used as photocatalysts in water splitting due to their advantageous properties. Electrochemical anodization is one of the best techniques to synthesize nanostructures directly on the metal substrate (direct back contact). In the present study, a novel methodology consisting of the anodization of iron under hydrodynamic conditions is carried out in order to obtain mainly hematite (alpha-Fe2O3) nanostructures to be used as photocatalysts for photoelectrochemical water splitting applications. Different rotation speeds were studied with the aim of evaluating the obtained nanostructures and determining the most attractive operational conditions. The synthesized nanostructures were characterized by means of Raman spectroscopy, Field Emission Scanning Electron Microscopy, photoelectrochemical water splitting, stability against photocorrosion tests, Mott-Schottky analysis,. Electrochemical Impedance Spectroscopy (EIS) and band gap measurements. The results showed that the highest photocurrent densities for photoelectrochemical water splitting were achieved for the nanostructure synthesized at 1000 rpm which corresponds to a nanotubular structure reaching similar to 0.130 mA cm(-2) at 0.54V (vs. Ag/AgCl). This is in agreement with the EIS measurements and Mott-Schottky analysis which showed the lowest resistances and the corresponding donor density values, respectively, for the nanostructure anodized at 1000 rpm., The authors would like to express their gratitude for the financial support to the Ministerio de Economia y Competitividad (Reference: BES-2014-068713, Project Code: CTQ2013-42494-R), for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012), for the co-finance by the European Social Fund and to Dr. Asuncion Jaime for her translation assistance
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of Reynolds number and lithium cation insertion on titanium anodization

  • Borràs-Ferrís, Joan
  • Sánchez Tovar, Rita
  • Fernández Domene, Ramón Manuel
  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • Garcia-Anton, Jose|||0000-0002-0289-1324
This work studies the influence of using hydrodynamic conditions (Reynolds number, Re = 0 to Re = 600) during Ti anodization and Li+ intercalation on anatase TiO2 nanotubes. The synthesized photocatalysts were characterized by using Field Emission Scanning Electron Microscope (FE-SEM), Raman Confocal Laser Microscopy, Electrochemical Impedance Spectroscopy (EIS), Mott-Schottky analysis (M-S), photoelectrochemical hydrogen production and resistance to photocorrosion tests. The obtained results showed that the conductivity of the NTs increases with Li+ intercalation and Re. The latter is due to the fact that the hydrodynamic conditions eliminate part of the initiation layer formed over the tube-tops, which is related to an increase of the photocurrent in the photoelectrochemical water splitting. Besides, the photogenerated electron-hole pairs are facilitated by Li+ intercalation. Finally, this work confirms that there is a synergistic effect between Re and Li+ intercalation., The authors would like to express their gratitude for the financial support to the Ministerio de Economia y Competitividad (CTQ2013-42494-R), for its help in the Laser Raman Microscope acquisition (UPOVO8-3E-012), and for the co-finance by the European Social Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Synergistic effect between hydrodynamic conditions during Ti anodization and acidic treatment on the photoelectric properties of TiO2 nanotubes

  • Sánchez Tovar, Rita
  • Fernández Domene, Ramón Manuel
  • Martinez Sanchez, Alejandro
  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • Garcia-Anton, Jose|||0000-0002-0289-1324
In the present work, the combined influence of controlled hydrodynamic conditions during Ti anodization and the acidic treatment with HClO4 on the photoelectric properties of mixed anatase/rutile TiO2 nanotubes has been studied. Anodized samples were analyzed by means of Field Emission Scanning Electronic Microscopy (FE-SEM), Confocal Raman Microscopy, electrochemical measurements (electrochemical impedance spectroscopy and Mott-Schottky analysis) and photoelectrochemical measurements. It has been observed that the use of hydrodynamic conditions increases the surface area of nanotubes, while acidic treatment enhances their conductivity. Besides, there is a clear synergistic effect between the hydrodynamic conditions and the acidic treatment, which results in higher photocurrent densities for the treated nanotubes formed under hydrodynamic conditions., Authors would like to express their gratitude for the financial support to the Ministerio of Economia y Competitividad (Project CTQ2013-42494-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Study of the annealing conditions and photoelectrochemical characterization of a new iron oxide bi-layered nanostructure for water splitting

  • Lucas-Granados, Bianca
  • Sánchez Tovar, Rita
  • Fernández Domene, Ramón Manuel
  • Garcia-Anton, Jose|||0000-0002-0289-1324
Iron oxide nanostructures have emerged as promising materials for being used as photocatalysts for hydrogen production due to their advantageous properties. However, their low carrier mobility and short hole diffusion length limit their efficiency in water splitting. To overcome these drawbacks, in the present study, we synthetized a new hematite (alpha-Fe2O3) bi-layered nanostructure consisting of a top nanosphere layer and a nanotubular underneath one by electrochemical anodization. Annealing parameters such as temperature, heating rate and atmosphere were studied in detail in order to determine the optimum annealing conditions for the synthetized nanostructure. The obtained new bi-layered nanostructure was characterized by Field Emission Scanning Electron Microscopy, Raman Spectroscopy, Mott-Schottky analysis and Electrochemical Impedance Spectroscopy. The results show the best water splitting performance for the bi-layered nanostructure annealed in argon atmosphere at 500 degrees C at a heating rate of 15 degrees C min(-1) achieving a photocurrent density of similar to 0.143 mA cm(-2) at 1.54 V (vs. RHE). The results indicate that the bi-layered nanostructure is an efficient photocatalyst for applications such as water splitting, The authors would like to express their gratitude for the financial support to the Ministerio de Economia y Competitividad (Reference: BES-2014-068713, Project Code: CTQ2013-42494-R), for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012) and for the co-finance by the European Social Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Improvement in photocatalytic activity of stable WO3 nanoplatelet globular clusters arranged in a tree-like fashion: Influence of rotation velocity during anodization

  • Fernández Domene, Ramón Manuel
  • Sánchez Tovar, Rita
  • Lucas-Granados, Bianca
  • Garcia-Anton, Jose|||0000-0002-0289-1324
This study investigates the influence of controlled hydrodynamic conditions during anodization of tungsten (W) on the morphological, electrochemical and photocatalytic properties of a novel WO3 nanostructure: globular clusters of nanoplatelets associated in a tree-like fashion. For this purpose different techniques such as Field-Emission Scanning Electronic Microscopy (FE-SEM), electrochemical impedance spectroscopy (EIS) measurements, Mott-Schottky (M-S) analysis and photoelectrochemical water splitting tests have been carried out. Photoanodes obtained at 375 rpm showed the best photoresponse, much higher than that of conventional WO3 nanoplatelets, which can be ascribed to a noteworthy increase in the electrochemically active surface area leading to improved charge transfer at the interface. Moreover, the improved WO3 nanostructure displayed very good long-term photostability when irradiated with AM 1.5 illumination, thus solving the recurrent problem of the poor stability of WO3 against photodegradation processes., Authors would like to express their gratitude for the financial support to the Ministerio of Economia y Competitividad (Project CTQ2013-42494-R) and to the European Social Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Novel tree-like WO3 nanoplatelets with very high surface area synthesized by anodization under controlled hydrodynamic conditions

  • Fernández Domene, Ramón Manuel
  • Sánchez Tovar, Rita
  • Segura Sanchis, Elena
  • Garcia-Anton, Jose|||0000-0002-0289-1324
In the present work, a new WO3 nanostructure has been obtained by anodization in a H2SO4/NaF electrolyte under controlled hydrodynamic conditions using a Rotating Disk Electrode (RDE) configuration. Anodized samples were analyzed by means of Field Emission Scanning Electronic Microscopy (FESEM), Confocal Raman Microscopy and photoelectrochemical measurements. The new nanostructure, which consists of nanoplatelets clusters growing in a tree-like manner, presents a very high surface area exposed to the electrolyte, leading to an outstanding enhancement of its photoelectrochemical activity. Obtained results show that the size of nanostructures and the percentage of electrode surface covered by these nanostructures depend strongly on the rotation velocity and the electrolyte composition., Authors would like to express their gratitude for the financial support to the Ministerio of Economia y Competitividad (Project CTQ2013-42494-R) and for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

ZnO/ZnS heterostructures for hydrogen production by photoelectrochemical water splitting

  • Sánchez Tovar, Rita
  • Fernández Domene, Ramón Manuel
  • Sanz Marco, Arturo
  • Montañés, Maria-Teresa|||0000-0002-2620-6926
  • Garcia-Anton, Jose|||0000-0002-0289-1324
This work studies the photoelectrochemical behavior of novel ZnO/ZnS heterostructures obtained by means of anodization in water and glycerol/water/NH4F electrolytes with different Na2S additions under controlled hydrodynamic conditions. For this purpose different techniques such as Field Emission Scanning Electronic Microscopy (FE-SEM) with EDX, Raman spectroscopy and photoelectrochemical water splitting tests under standard AM 1.5 conditions have been carried out. The obtained results showed that the hydrodynamic conditions promoted an ordered nanotubular morphology which facilitates electron-hole separation and consequently, the photoelectrochemical activity for water splitting is enhanced. Additionally, the effect of glycerol in the anodization solutions seems to be beneficial for increasing the dark current photostability., The authors would like to express their gratitude for the financial support to the Ministerio de Economia y Competitividad (CTQ2013-42494-R), for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012), and for the co-finance by the European Social Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Nuevos fotocatalizadores basados en nanoestructuras de óxido de hierro para su aplicación en el campo energético

  • Lucas Granados, Bianca
[ES] La presente Tesis Doctoral se centra en el estudio de las nanoestructuras de óxido de hierro para su aplicación en el campo energético, en particular para la producción de hidrógeno a partir de la rotura fotoelectroquímica de la molécula de agua. El uso del óxido de hierro como fotocatalizador para dicho proceso es de especial interés, ya que es un material compatible con el medio ambiente, no tóxico, de bajo coste y uno de los más abundantes en la Tierra. Además, presenta unas características ópticas que permiten un gran aprovechamiento de la energía solar, sobretodo, en su región visible. Las nanoestructuras estudiadas en la Tesis Doctoral se sintetizaron mediante anodizado electroquímico del hierro, ya que es un proceso sencillo y que posibilita un fácil control de sus parámetros, permitiendo obtener las nanoestructuras directamente sobre el propio sustrato metálico. Así, variando los diferentes parámetros del proceso, se obtuvieron nanoestructuras con diferentes propiedades tanto estructurales como electroquímicas y fotoelectroquímicas. En particular, los parámetros estudiados fueron: las condiciones hidrodinámicas de flujo (diferentes velocidades de rotación del electrodo durante el anodizado electroquímico), la temperatura del electrolito, la diferencia de potencial aplicada, la concentración de NH4F y H2O presentes en el electrolito, y el tiempo de anodizado. Además, también se estudiaron diferentes parámetros del proceso de posanodizado, necesario para la obtención de una estructura cristalina de las muestras que permita su aplicación como fotocatalizadores. Los parámetros estudiados fueron: la temperatura, la velocidad y la atmósfera de calentamiento durante el tratamiento. Las nanoestructuras obtenidas se caracterizaron y estudiaron para ser aplicadas como fotocatalizadores para la producción de hidrógeno a partir de luz solar. Los resultados indicaron que las nanoestructuras mejoraron notablemente su comportamiento fotoelectroquímico al ser sintetizadas en condiciones hidrodinámicas de flujo, en concreto, al aplicar una velocidad de rotación del electrodo de 1000 rpm durante el anodizado. También se consideraron favorables las siguientes condiciones de anodizado electroquímico: temperatura del electrolito de 25 °C, 50 V de diferencia de potencial, 0.1 M de NH4F y 3 %vol. H2O en el electrolito, y un tiempo de 10 minutos de anodizado. Además, las condiciones de posanodizado que proporcionaron nanoestructuras con las mejores propiedades fueron: temperatura de calentamiento de 500 °C, velocidad de calentamiento de 15 °C·min-1 y atmósfera de argón. Todas las condiciones indicadas permitieron sintetizar nanoestructuras con propiedades adecuadas para la producción de hidrógeno mediante la rotura fotoelectroquímica de la molécula de agua. Así, se alcanzaron valores de densidades de fotocorriente durante los ensayos del orden de 0.26 mA·cm-2 (a 0.5 V vs. Ag/AgCl), lo que aplicando las leyes de Faraday y considerando una eficiencia ideal del 100 %, supondría una producción teórica de hidrógeno de 12 mL·dm-2·h-1 (29 L por día y por m2 de nanoestructura)., [CA] La present Tesi Doctoral se centra en l'estudi de les nanoestructures d'òxid de ferro per a la seua aplicació en el camp energètic, en particular per a la producció d'hidrogen a partir del trencament fotoelectroquímic de la molècula d'aigua. L'ús de l'òxid de ferro com a fotocatalitzador per a aquest procés és d'especial interès, ja que és un material compatible amb el medi ambient, no tòxic, de baix cost i un dels més abundants de la Terra. A més, presenta unes característiques òptiques que permeten un gran aprofitament de l'energia solar, sobretot, de la regió visible. Les nanoestructures estudiades en la Tesi Doctoral es van sintetitzar mitjançant anodització electroquímica del ferro, ja que es un procés senzill i que possibilita un fàcil control dels seus paràmetres, permetent obtenir les nanoestructures directament sobre el propi substrat metàl·lic. Així, variant els diferents paràmetres del procés, es van obtenir nanoestructures amb diferents propietats, tant estructurals com electroquímiques i fotoelectroquímiques. En particular, els paràmetres estudiats van ser: les condicions hidrodinàmiques del flux (diferents velocitats de rotació de l'elèctrode durant l'anodització electroquímica), la temperatura de l'electròlit, la diferència de potencial aplicada, la quantitat de NH4F i H2O presents a l'electròlit, i el temps d'anodització. A més, es van estudiar també diferents paràmetres del procés de postanodització, necessari per a l'obtenció d'una estructura cristal·lina de les mostres, que permeta la seua aplicació com a fotocatalitzadors. Els paràmetres estudiats van ser: la temperatura, la velocitat i l'atmosfera d'escalfament durant el tractament. Les nanoestructures obtingudes es van caracteritzar i estudiar per a ser aplicades com a fotocatalitzadors en el camp energètic per a la producció d'hidrogen a partir de la llum solar. Els resultats van indicar que les nanoestructures van millorar notablement el seu comportament fotoelectroquímic en ser sintetitzades en condiciones hidrodinàmiques de flux, en concret, en aplicar una velocitat de rotació de l'elèctrode de 1000 rpm durant l'anodització. També es van considerar favorables les següents condicions d'anodització electroquímica: temperatura de l'electròlit de 25 °C, 50 V de diferència de potencial, 0.1 M de NH4F i 3 %vol. H2O en l'electròlit, i un temps de 10 minuts d'anodització. A més, les condicions de postanodització que van proporcionar nanoestructures amb les millors propietats van ser: temperatura de calfament de 500 °C, velocitat de calfament de 15 °C·min-1 i atmosfera d'argó. Totes les condicions indicades van permetre sintetitzar nanoestructures amb propietats adequades per a la producció d'hidrogen mitjançant el trencament fotoelectroquímic de la molècula d'aigua. Així, es van aconseguir valors de densitats de fotocorrent durant els assajos de l'ordre de 0.26 mA·cm-2 (a 0.5 V vs. Ag/AgCl), la qual cosa, aplicant les lleis de Faraday i considerant una eficiència ideal del 100 %, suposaria una producció teòrica d'hidrogen de 12 mL·dm-2·h-1 (29 L per dia i per m2 de nanoestructura)., [EN] This Doctoral Thesis is focused on the study of iron oxide nanostructures for being used in the energy field, in particular to the production of hydrogen by water splitting. The use of iron oxide as photocatalyst for this purpose is interesting since it is environmentally friendly, non-toxic, low cost and one of the most abundant materials in the Earth. Furthermore, it has suitable optical properties for harvesting solar energy, mainly in its visible region. The nanosctructures studied in the Doctoral Thesis were synthesized by electrochemical anodization of iron, since it is a simple process that makes possible an easy control of its parameters, which allows obtaining the nanostructures directly on the metallic substrate. In this way, varying different parameters of the process, nanostructures with different structural, electrochemical and photoelectrochemical properties were obtained. In particular, these parameters were: hydrodynamic conditions (different electrode rotation speeds during electrochemical anodization), electrolyte temperature, applied potential difference, NH4F and H2O concentration in the electrolyte, and anodization time. Moreover, different parameters of the post anodization process are studied. Post anodization treatment is required for obtaining a crystalline structure of the nanostructures that makes possible its application as photocatalysts. The studied parameters were: temperature, heating rate and atmosphere during annealing process. The obtained nanostructures were characterized and applied as photocatalysts to produce hydrogen using solar light. Results indicated that the nanostructures improved considerably their photoelectrochemical behaviour when they were synthesized in hydrodynamic conditions, in particular, at an electrode rotation speed of 1000 rpm during anodization. The following anodization conditions were also favourable: electrolyte temperature of 25 °C, 50 V of potential difference applied, 0.1 M of NH4F and 3 %vol. H2O in the electrolyte, and an anodization time of 10 minutes. Furthermore, post anodization conditions that provided nanostructures with the best properties were: a heating temperature of 500 °C, a heating rate of 15 °C·min-1 and argon atmosphere. All the indicated conditions allowed synthesizing nanostructures with suitable properties for the production of hydrogen by water splitting. Thus, photocurrent density values during the experiments of the order of 0.26 mA·cm-2 (at 0.5 V vs. Ag/AgCl), that applying Faraday's laws and considering an ideal efficiency of 100 %, would imply a theorical hydrogen production of 12 mL·dm-2·h-1 (29 L per day and per m2 of nanostructure)., Agradezco al Ministerio de Economía y Competitividad por la ayuda predoctoral recibida para la realización de la presente Tesis Doctoral (BES-2014-068713) asociada al proyecto CTQ2013-42494-R, y al Fondo Social Europeo por la cofinanciación. También agradezco al Ministerio de Economía, Industria y Competitividad, por la ayuda obtenida para la realización de una estancia predoctoral (EEBB-I-18-13065) en la Universidad de Cambridge (Reino Unido).