Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Formation of Hematite Nanotubes by Two-Step Electrochemical Anodization for Efficient Degradation of Organic Pollutants

  • Lucas-Granados, Bianca
  • Sánchez Tovar, Rita
  • Fernández Domene, Ramón Manuel
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] Nowadays, hematite (alpha-Fe2O3) has emerged as a promising photocatalyst for efficient degradation of organic pollutants due to its properties such as suitable band-gap (similar to 2.1 eV), stability against photocorrosion, abundance and low cost. However, some drawbacks such as low carrier mobility and short hole diffusion length limit its efficiency. In order to overcome these issues, self-ordered nanotubes can be synthetized. Anodization is one of the simplest and most economic techniques to produce nanostructures with high control. In the present study, self-ordered hematite nanotubes were synthetized by two-step electrochemical anodization. In two-step anodization, a first-step was actually a pretreatment to form well-ordered nanoporous template in which well-ordered nanotubes are grown by a second-step. The formed nanotubes were characterized by different methods such as Field Emission Scanning Microscopy and Raman spectroscopy to determine their morphology and crystalline structure, respectively. Furthermore, the obtained nanotubes were characterized by means of photocurrent density versus potential measurements (water splitting) to evaluate their efficiency as photocatalyst. Good results were obtained as the achieved photocurrent density was 0.079 mA cm(-2) at 0.58 V (vs. Ag/AgCl), which indicates that the nanotubes synthetized by two-step anodization are suitable photocatalysts for degradation of organic pollutants., The authors would like to express their gratitude for the financial support to the Ministerio de Economía y Competitividad (Reference: BES-2014-068713, Project Code: CTQ2013-42494-R), for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012), and for the co-finance by the European Social Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influence of the Heating Rate on the Annealing Treatment of Iron Oxide Nanostructures Obtained by Electrochemical Anodization under Hydrodynamic Conditions

  • Lucas-Granados, Bianca
  • Sánchez Tovar, Rita
  • Fernández Domene, Ramón Manuel
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] Iron oxide nanostructures are promising materials for photoelectrochemical applications such as water splitting. In this work, electrochemical anodization of iron is used to form different iron oxide nanostructures, and the influence of different anodization parameters was studied in order to find the most suitable nanostructure for photocatalysis applications. On the one hand, hydrodynamic conditions were evaluated by stirring the electrode at different rotation speeds during the electrochemical anodization to check their influence on the formation of the nanostructures. On the other hand, different heating rates during the annealing treatment were studied for obtaining efficient iron oxide nanostructures. The synthesized nanostructures were characterized by different techniques such as photocurrent density vs. potential measurements, Field Emission Scanning Electron Microscopy, Raman spectroscopy and Incident Photon-toelectron Conversion Efficiency (IPCE). The results revealed that the best heating rate during the annealing treatment is 15 ºC·min-1 and that the hydrodynamic conditions allow the formation of nanotubular iron oxide structures achieving ~0.1 mA·cm-2 at 0.5 V (vs. Ag/AgCl) in the water splitting measurements. Moreover, all the nanostructures are mainly composed by hematite (¿-Fe2O3) with some amount of magnetite (Fe3O4) in their structure. Finally, the IPCE measurements showed that the best rotation speed during the electrochemical anodization for the formation of an efficient iron oxide nanostructure for photocatalysis applications is 1,000 rpm., The authors would like to express their gratitude for the financial support to the Ministerio de Economía y Competitividad (Reference: BES-2014-068713, Project Code: CTQ2013-42494-R), for its help in the Laser Raman Confocal Microscope acquisition (UPOV08-3E-012), and for the co-finance by the European Social Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influence of electrolyte temperature on the synthesis of iron oxide nanostructures by electrochemical anodization for water splitting

  • Lucas-Granados, Bianca
  • Sánchez Tovar, Rita
  • Fernández Domene, Ramón Manuel
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] Iron oxide nanostructures are an attractive option for being used as photocatalyst in photoelectrochemical applications such as water splitting for hydrogen production. Nanostructures can be obtained by different techniques, and electrochemical anodization is one of the simplest methods which allows high control of the obtained morphology by controlling its different operational parameters. In the present study, the influence of the electrolyte temperature during electrochemical anodization under stagnant and hydrodynamic conditions was evaluated. Temperature considerably affected the morphology of the obtained nanostructures and their photoelectrochemical behavior. Several techniques were used in order to characterize the obtained nanostructures, such as Field Emission Scanning Electron Microscopy (before and after the annealing treatment in order to evaluate the changes in morphology), Raman spectroscopy, photocurrent vs. potential measurements and Mott-Schottky analysis. Results revealed that the nanostructures synthesized at an electrolyte temperature of 25 degrees C and 1000 rpm are the most suitable for being used as photocatalysts for water splitting. (C) 2018 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved., The authors would like to express their gratitude for the financial support granted by the Ministerio de Economia y Competitividad (Reference: BES-2014-068713 and Project CTQ2016-79203-R), for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012) and for the co-finance by the European Social Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Controlled hydrodynamic conditions on the formation of iron oxide nanostructures synthesized by electrochemical anodization: Effect of the electrode rotation speed

  • Lucas-Granados, Bianca
  • Sánchez Tovar, Rita
  • Fernández Domene, Ramón Manuel
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] Iron oxide nanostructures are of particular interest because they can be used as photocatalysts in water splitting due to their advantageous properties. Electrochemical anodization is one of the best techniques to synthesize nanostructures directly on the metal substrate (direct back contact). In the present study, a novel methodology consisting of the anodization of iron under hydrodynamic conditions is carried out in order to obtain mainly hematite (alpha-Fe2O3) nanostructures to be used as photocatalysts for photoelectrochemical water splitting applications. Different rotation speeds were studied with the aim of evaluating the obtained nanostructures and determining the most attractive operational conditions. The synthesized nanostructures were characterized by means of Raman spectroscopy, Field Emission Scanning Electron Microscopy, photoelectrochemical water splitting, stability against photocorrosion tests, Mott-Schottky analysis,. Electrochemical Impedance Spectroscopy (EIS) and band gap measurements. The results showed that the highest photocurrent densities for photoelectrochemical water splitting were achieved for the nanostructure synthesized at 1000 rpm which corresponds to a nanotubular structure reaching similar to 0.130 mA cm(-2) at 0.54V (vs. Ag/AgCl). This is in agreement with the EIS measurements and Mott-Schottky analysis which showed the lowest resistances and the corresponding donor density values, respectively, for the nanostructure anodized at 1000 rpm., The authors would like to express their gratitude for the financial support to the Ministerio de Economia y Competitividad (Reference: BES-2014-068713, Project Code: CTQ2013-42494-R), for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012), for the co-finance by the European Social Fund and to Dr. Asuncion Jaime for her translation assistance
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Study of the annealing conditions and photoelectrochemical characterization of a new iron oxide bi-layered nanostructure for water splitting

  • Lucas-Granados, Bianca
  • Sánchez Tovar, Rita
  • Fernández Domene, Ramón Manuel
  • Garcia-Anton, Jose|||0000-0002-0289-1324
Iron oxide nanostructures have emerged as promising materials for being used as photocatalysts for hydrogen production due to their advantageous properties. However, their low carrier mobility and short hole diffusion length limit their efficiency in water splitting. To overcome these drawbacks, in the present study, we synthetized a new hematite (alpha-Fe2O3) bi-layered nanostructure consisting of a top nanosphere layer and a nanotubular underneath one by electrochemical anodization. Annealing parameters such as temperature, heating rate and atmosphere were studied in detail in order to determine the optimum annealing conditions for the synthetized nanostructure. The obtained new bi-layered nanostructure was characterized by Field Emission Scanning Electron Microscopy, Raman Spectroscopy, Mott-Schottky analysis and Electrochemical Impedance Spectroscopy. The results show the best water splitting performance for the bi-layered nanostructure annealed in argon atmosphere at 500 degrees C at a heating rate of 15 degrees C min(-1) achieving a photocurrent density of similar to 0.143 mA cm(-2) at 1.54 V (vs. RHE). The results indicate that the bi-layered nanostructure is an efficient photocatalyst for applications such as water splitting, The authors would like to express their gratitude for the financial support to the Ministerio de Economia y Competitividad (Reference: BES-2014-068713, Project Code: CTQ2013-42494-R), for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012) and for the co-finance by the European Social Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A pH Study for the Degradation of Acetaminophen with Iron Oxide Nanostructures

  • Lucas-Granados, Bianca
  • Sánchez Tovar, Rita
  • Fernández Domene, Ramón Manuel
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] Nowadays, there is an increasing interest in the degradation of organic compounds in wastewater, since they are detrimental for the water quality. Different metal oxides have been studied as photocatalysts in the photoelectrocatalytic degradation of pharmaceutical products using UV light. Iron oxide nanostructures are a promising option in this field since their band gap (~ 2.1 eV, corresponding to ~590 nm) can absorb visible light, which in turn allows the degradation by using sunlight. Iron oxide nanostructures are known to be stable in alkaline solutions, but some organic compounds can vary their structure with pH. Then, a pH study is needed in order to stablish the optimum value to guarantee both the nanostructures and the organic molecule stability. In this work, acetaminophen (more known as paracetamol) is studied in different pH media (from pH 9 to pH 13) in order to evaluate the viability of iron oxide nanostructures as photocatalysts in the acetaminophen degradation process. Results showed that pH is a determinant parameter in the degradation process since the paracetamol UV-Vis spectrum varied with it. However, a pH compromise value is stablished in order to ensure the viability of the usage of iron oxide nanostructures in the acetaminophen degradation proces, The authors would like to express their gratitude for the financial support granted to Bianca Lucas Granados by the Ministerio de Economía y Competitividad (Reference: BES-2014-068713 and Project CTQ2016-79203-R), for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012) and for the co-finance by the European Social Fund, and to the UPV for the concession of a post-doctoral grant (PAID-10-17) to Ramón M. Fernández Domene.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Iron oxide nanostructures for photoelectrochemical applications: Effect of applied potential during Fe anodization

  • Lucas-Granados, Bianca
  • Sánchez Tovar, Rita
  • Fernández Domene, Ramón Manuel
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] In photoelectrochemistry, a suitable photoanode leading to high efficiencies in photocatalytic processes is a research challenge. Iron oxide nanostructures are promising materials to be used as photoanodes. In this work, different potentials during iron anodization were applied to study the properties of the synthesized nanostructures. Results revealed that nanostructures anodized at 50V presented well-defined nanotubular structures with open-tube tops, and they achieved values of photocurrent density of 0.11 mA cm(-2) at 0 rpm and 0.14 mA cm(-2) at 1000 rpm (measured at 0.50 V-Ag/Agcl), corresponding to the oxygen evolution reaction from water, i.e. 2H(2)O+4h(+)-> 4H(+)+O-2, demonstrating their good photoelectrochemical behavior., The authors would like to express their gratitude for the financial support granted to Bianca Lucas Granados by the Ministerio de Economia y Competitividad (Reference: BES-2014-068713 and Project CTQ2016-79203-R), for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012) and for the co-finance by the European Social Fund, and to the UPV for the concession of a post-doctoral grant (PAID-10-17) to Ramon M. Fernandez Domene.