Skip to main content

NANOCOMPUESTOS POLIMERICOS SOSTENIBLES PARA MATERIALES MULTIFUNCIONALES

PID2020-117573GB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2020
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 20
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Relation between chemical composition, morphology, and microstructure of poly(ether ether ketone)/reduced graphene oxide nanocomposite coatings obtained by electrophoretic deposition

  • González-Castillo, Eduin I.
  • Žitnan, M.
  • Torres, Yadir
  • Shuttleworth, Peter S.
  • Galusek, Dušan
  • Ellis, Gary James
  • Boccaccini, A. R.
The effect of the chemical composition on the morphology and microstructure of poly(ether ether ketone) (PEEK)/reduced graphene oxide (RGO) nanocomposite coatings is analyzed. RGO induced three main morphological features in the nanocomposites: (i) a large-scale co-continuous morphology related to nanosheets whose basal planes were mainly aligned with the coating surface, (ii) a dendritic morphology of PEEK domains, and (iii) irregular domains related to the deposition of PEEK particles wrapped by the nanosheets. The development of these morphological features was influenced by the RGO content, allowing the modification of the surface roughness. RGO also induced changes in the melting and non-isothermal crystallization of the polymeric matrix and promoted transcrystallinity in PEEK that, in turn, was a key factor in the development of the final microstructure. In addition, polymer chain mobility was observed to be hindered at high nanofiller concentrations, increasing the glass transition temperature, and diminishing the recrystallization of the polymeric matrix., Eduin I. González-Castillo gratefully acknowledges the National Council of Science and Technology (CONACYT, Mexico) for the postdoctoral scholarship (Reference: 239274) to carry out his project. Partial funding from the project FunGlass is acknowledged (European Unions Horizon 2020 research and inno- vation program under grant agreement No 739566). Yadir Torres expresses his gratitude to the Ministry of Science and Innovation of Spain (grant PID2019- 109371GB-I00). Peter S. Shuttleworth and Gary Ellis gratefully acknowledges the ‘‘Ministerio de Ciencia e Innovación’’ of Spain (Grant: PID2020- 117573GB-I00) funded by MCIN/AEI/10.13039/ 501100011033 and by the ‘‘European Union NextGenerationEU/PRTR’’. Michal Zˇ itnˇ an thanks the Centre for Functional and Surface Functionalized Glass (CEGLASS) (ITMS code is 313011R453) opera- tional program Research and Innovation, co-funded by European Regional Development Fund.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Unveiling the reinforcement effects in cottonseed protein/polycaprolactone blend biocomposites

  • Li, L.
  • Yue, H
  • Wu, Q.
  • Fernández-Blázquez, J. P.
  • Shuttleworth, Peter S.
  • Clark, J. H.
  • Guo, J.
Cottonseed protein (CP) was compounded with polycaprolactone (PCL) in different concentrations by melt blending, and then hot-pressed to prepare CP/PCL blend films. A co-continuous phase is formed when the CP/PCL content is 50/50, and the tensile strength, modulus and toughness are 9, 10, and 63 times greater than that of neat CP film. This remarkable improvement is mainly due to the intrinsic flexibility of long PCL polymer chains, whilst the polymeric crystalline structure can still be formed. Furthermore, 1 wt% of compatibilizing agent — glycidyl methacrylate (GMA) or maleic anhydride (MA), is added to the blends. Measurements from scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR) showed the presence of chemically reactive compatibilization between the compatibilizer and CP or PCL phase, and the two phases with strong binding forces are well dispersed. Meanwhile, the compatibilizer can induce the protein secondary structure to unfold, further increasing the physical compatibilization between the protein and polymer chains, which has a noticeable contribution to the blend's mechanical, hydrophobic properties and thermal stability. This work adds new element to the knowledge of compatibilization in terms of optimised interfaces of polymer blends, and provide new insights into fabricating high performance protein derived bioplastics and biocomposites., This work was supported by National Natural Science Foundation of China (21706039), Natural Science Foundation of Guangdong Province (2022A1515011500), Guangdong Provincial Key Laboratory of Plant Resources Biorefinery (2021B1212040011), and China Scholarship Council. P.S.S. gratefully acknowledges financial support from the Ministerio de Ciencia e Innovaci ́on for the PID2020-117573-GB-I00 grant.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Investigation of the Crystallization Kinetics and Melting Behaviour of Polymer Blend Nanocomposites Based on Poly(L-Lactic Acid), Nylon 11 and TMDCs WS2

  • Naffakh, Mohammed
  • Shuttleworth, Peter S.
The aim of this work was to study the crystallization kinetics and melting behaviour of polymer blend nanocomposites based on poly (L-lactic acid) (PLLA), nylon 11 and tungsten disulfide nanotubes (INT-WS2), which are layered transition metal dichalcogenides (TMDCs), using non-isothermal differential scanning calorimetry (DSC). Blends containing different nylon 11 contents ranging from 20 to 80 wt% with or without INT-WS2 were prepared by melt mixing. Evaluation of their morphology with high-resolution SEM imaging proved that the incorporation of inorganic nanotubes into the immiscible PLLA/nylon 11 mixtures led to an improvement in the dispersibility of the nylon 11 phase, a reduction in its average domain size and, consequently, an increase in its interfacial area. The crystallization temperatures of these PLLA/nylon 11-INT blends were influenced by the cooling rate and composition. In particular, the DSC results appear to demonstrate that the 1D-TMDCs WS2 within the PLLA/nylon 11-INT blend nanocomposites initiated nucleation in both polymeric components, with the effect being more pronounced for PLLA. Moreover, the nucleation activity and activation energy were calculated to support these findings. The nucleation effect of INT-WS2, which influences the melting behaviour of PLLA, is highly important, particularly when evaluating polymer crystallinity. This study opens up new perspectives for the development of advanced PLA-based nanomaterials that show great potential for ecological and biomedical applications., M.N. acknowledges FEDER/Ministerio de Ciencia, Innovación y Universidades—Agencia Estatal de Investigación/MAT2017-84691-P and Subprograma Estatal de Incorporación/IED2019- 001134-I and P.S.S. the Ministerio de Ciencia e Innovación of Spain (grant: PID2020-117573GB-I00) funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PR
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Fabrication of Nylon 6-Montmorillonite Clay Nanocomposites with Enhanced Structural and Mechanical Properties by Solution Compounding

  • Abdelgawwad, Ahmed M.
  • Ramadan, Adham R.
  • Flores, Araceli
  • Esawi, Amal M.K.
Melt compounding has been favored by researchers for producing nylon 6/montmorillonite clay nanocomposites. It was reported that high compatibility between the clay and the nylon6 matrix is essential for producing exfoliated and well-dispersed clay particles within the nylon6 matrix. Though solution compounding represents an alternative preparation method, reported research for its use for the preparation of nylon 6/montmorillonite clay is limited. In the present work, solution compounding was used to prepare nylon6/montmorillonite clays and was found to produce exfoliated nylon 6/montmorillonite nanocomposites, for both organically modified clays with known compatibility with nylon 6 (Cloisite 30B) and clays with low/no compatibility with nylon 6 (Cloisite 15A and Na-MMT), though to a lower extent. Additionally, solution compounding was found to produce the more stable α crystal structure for both blank nylon6 and nylon6/montmorillonite clays. The process was found to enhance the matrix crystallinity of blank nylon6 samples from 36 to 58%. The resulting composites were found to possess comparable mechanical properties to similar composites produced by melt blending., This research was funded by the Yousef Jameel Science and Technology Research Center at the American University in Cairo, Egypt. AF’s contribution was funded by the MICINN (Ministerio de Ciencia e Innovación), Spain under grant PID2020-117573GB-I00. The APC was funded by the American University in Cairo.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Efficient adsorption of bulky reactive dyes from water using sustainably-derived mesoporous carbons

  • Abdoul, Hayman J.
  • Yi, Minghao
  • Prieto, Manuel
  • Yue, Hangbo
  • Ellis, Gary James
  • Clark, James H.
  • Budarin, Vitaliy L.
  • Shuttleworth, Peter S.
Hazardous reactive dyes can cause serious environmental problems, as they are difficult to remove from water using conventional adsorbents due to their large molecular sizes and bulky structures. Sustainable mesoporous carbons derived from alginic acid demonstrated promising adsorbent capacity for several representative industrial bulky reactive dye molecules that account for almost 30% of the global textile dye market: Procion Yellow H-XEL (PY), Remazol Black (RB), Procion Crimson H-XEL (PC) and Procion Navy H-XEL (PN). These new adsorbents showed high mesoporosity (>90%) and large pore diameters (>20 nm) facilitating more straightforward and efficient adsorption and desorption processes when compared with predominately microporous activated carbon (AC), Norit, of similar surface chemistry, or with Silica gel (Sgel) that shows good mesoporosity but is hydrophilic. Their adsorption capacity was also significantly higher than that of both AC and Sgel, verifying suitability for bulky dye elimination from wastewater. Adsorption kinetic studies showed a best fit with the Elovich model, indicating a heterogeneous surface adsorption process. The adsorption isotherm data was best represented via the Toth model for almost all adsorbent/dye systems (R2 ¿ 0.98), validating the results of the Elovich model whereby the adsorbent is structurally heterogenous with multilayer dye coverage. From thermodynamic analysis, the derived parameters of ¿G (¿11.6 ~ ¿6.2 kJ/mol), ¿H and ¿S demonstrate a spontaneous, enthalpy controlled adsorption process that was exothermic for RB (¿10.0 kJ/mol) and PC (¿23.9 kJ/mol) and endothermic for PY (3.9 kJ/mol) and PN (13.2 kJ/mol). Overall these alginic acid based mesoporous carbons are cost-effective, sustainable and efficient alternatives to current predominantly microporous adsorbent systems., The authors gratefully acknowledge the Ministry of Science and Innovation of Spain (Grant: PID 2020-117573 GB-I00) funded by MCIN/ AEI/10.13039/501100011033 and by the ‘‘European Union Next Generation EU/PRTR’‘. VB acknowledge finance from the CSIC scientific Ukrainian cooperation program (No. UCRAN20080). MP also acknowledge funding from the European Union, Next Generation EU via SusPlast, the Interdisciplinary Platform for Sustainable Plastics towards a Circular Economy of the CSIC, MY thanks the China Scholarship Council for a doctoral scholarship (CSC No. 202008440497), and HY the Natural Science Foundation of Guangdong Province (2022A1515011500)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

PET/Graphene Nanocomposite Fibers Obtained by Dry-Jet Wet-Spinning for Conductive Textiles

  • León-Boigues, Laia
  • Flores, Araceli
  • Gómez-Fatou, Marián A.
  • Vega, Juan Francisco
  • Ellis, Gary James
  • Salavagione, Horacio J.
The combination of polyethylene terephthalate (PET), one of the most used polymers in the textile industry, with graphene, one of the most outstanding conductive materials in recent years, represents a promising strategy for the preparation of conductive textiles. This study focuses on the preparation of mechanically stable and conductive polymer textiles and describes the preparation of PET/graphene fibers by the dry-jet wet-spinning method from nanocomposite solutions in trifluoroacetic acid. Nanoindentation results show that the addition of a small amount of graphene (2 wt.%) to the glassy PET fibers produces a significant modulus and hardness enhancement (≈10%) that can be partly attributed to the intrinsic mechanical properties of graphene but also to the promotion of crystallinity. Higher graphene loadings up to 5 wt.% are found to produce additional mechanical improvements up to ≈20% that can be merely attributed to the superior properties of the filler. Moreover, the nanocomposite fibers display an electrical conductivity percolation threshold over 2 wt.% approaching ≈0.2 S/cm for the largest graphene loading. Finally, bending tests on the nanocomposite fibers show that the good electrical conductivity can be preserved under cyclic mechanical loading., This research was funded by Ministerio de Ciencia e Innovación, Agencia Estatal de Investigación (AEI), and Fondo Europeo de Desarrollo Regional (FEDER, UE), grant numbers MAT2017-88382-P and PID2020-117573GB-I00. L.L.-B. acknowledges a Margarita Salas research contract supported by the Spanish “Ministerio de Ciencia, Innovación y Universidades” financed with EU Next Generation funds, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Recent advancement in bio-based adhesives derived from plant proteins for plywood application: A review

  • Yue, Hangbo
  • Mai, Lingwei
  • Xu, Chao
  • Yang, Chufen
  • Shuttleworth, Peter S.
  • Cui, Y.
Plywood, a multipurpose engineered wood with a huge global market of approximately 106 million cubic meters is constructed by bonding thin alternating perpendicular orientated sheets of wood together. As a consequence of this demand, the quantity of adhesives needed to bond the wood sheets is also vast, with urea-formaldehyde, phenolic, and melamine-formaldehyde resins being the most commonly employed due to their good bonding performance. However, these types of adhesives have many disadvantages, from being non-sustainable to emitting carcinogenic and mutagenic formaldehyde during use. As such, natural plant protein adhesives can be used as a potential alternative to traditional, toxic and non-renewable aldehyde-based adhesives for bonding plywood, with the advantages of attaining good adhesive performance, being widely available and sustainable. In this review, background information on protein composition and its interaction with wood are initially discussed, followed by the methodology necessary to pre-treat the protein. Important factors for determining bonding strength and the most likely bonding mechanism are also introduced. Furthermore, the state-of-the-art regarding bio-adhesives derived from a large variety of different types of plant protein for plywood bonding application are discussed. Current challenges with respect to water resistance, waste protein sources, and preservation time are also reviewed, followed by future prospects and directions within this field. It's worth noting that the statistical data and literature reported within this review were obtained from governmental reports, scientific journals and public patents between the years of 2009 and 2022, with most citations being from the last 5 years., This work was supported by Natural Science Foundation of Guangdong Province (2022A1515011500), National Natural Science Foundation of China (21706039), and Guangdong Provincial Key Laboratory of Plant Resources Biorefinery (2021B1212040011). P.S.S. gratefully acknowledges the Ministerio de Ciencia e Innovación of Spain (Grant: PID2020-117573 GB-I00) funded by MCIN/AEI/10.13039/501100011033 and, by the “European Union NextGenerationEU/PRTR”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Thermal and tribo-mechanical properties of high-performance poly(etheretherketone)/reduced graphene oxide nanocomposite coatings prepared by electrophoretic deposition

  • González-Castillo, Eduin I.
  • Torres, Yadir
  • González, Francisco J.
  • Aguilar-Rabiela, Arturo E.
  • Shuttleworth, Peter S.
  • Ellis, Gary James
  • Boccaccini, Aldo R.
The thermal stability and degradation, near-to-surface mechanical properties, and scratch resistance and damage mechanism of poly(etheretherketone) (PEEK)/reduced graphene oxide (RGO) nanocomposite coatings are analyzed and discussed in terms of their nanosheet content and microstructure. Although RGO modified the thermal stability and degradation of the polymeric matrix, for instance, by slightly reducing the onset degradation temperature, its addition was not a limiting factor in the PEEK processing. Respecting the microstructural features induced by the nanosheets, the nanocomposite coatings were found to exhibit (i) a partially exfoliated and large-scale co-continuous morphology related to RGO nanosheets whose basal planes were mainly aligned with the coating surface, (ii) a dendritic morphology of PEEK domains related to transcrystallinity, (iii) and irregular domains associated with the deposition of PEEK particles wrapped by the nanosheets. The changes provoked by RGO in the morphology and PEEK crystalline phase influenced the near-to-surface mechanical properties, scratch resistance, and scratch damage mechanism of the nanocomposite coatings. Within this context, the interlayer strength between the nanosheets in the large-scale co-continuous morphology and PEEK transcrystallinity had an important effect. Furthermore, the random-bumpy surface texture formed by the irregular PEEK domains together with the conformal cracking damage mechanism was decisive in the scratch response of the PEEK/RGO nanocomposite coatings. The comprehensive characterization carried out in this work concludes that PEEK/RGO electrophoretic coatings are suitable for a variety of applications requiring tribo-mechanical resistance. Graphical Abstract: [Figure not available: see fulltext.], Eduin I. Gonza´lez-Castillo gratefully acknowledges the National Council of Science and Technology CONACYT, Mexico) for the postdoctoral scholarship (Reference: 239274) to conduct his project. Yadir Torres expresses his gratitude to the Ministry of Science and Innovation of Spain (grant PID2019-109371GB-I00). Arturo E. Aguilar-Rabiela acknowledges the Deutscher Akademischer Austauschdienst (DAAD) for the funding (Ref. No. 91801820). Peter S. Shuttleworth and Gary Ellis gratefully acknowledge the Ministry of Science and Innovation of Spain (Grant: PID2020-117573GB-I00) funded by MCIN/ AEI/.13039/501100011033 and by the ‘‘European Union Next Generation EU/PRTR.’’ We thank Prof. Milo Shaffer (Imperial College London, UK) for fruitful discussions at the start of this project. Open access funding provided by The Ministry of Education, Science, Research and Sport of the Slovak Republic in cooperation with Centre for Scientific and Technical Information of the Slovak Republic., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Operando exploration of tribochemical decomposition of FeS2 thin films and mineral iron pyrite

  • Muñoz-Cortés, Esmeralda
  • Sánchez-Prieto, Jesús
  • Zabala, Borja
  • Sánchez, Carlos
  • Flores, Eduardo
  • Flores, Araceli
  • Román García, Elisa Leonor
  • Ares, José R.
  • Nevshupa, Roman
Tribochemical decomposition of thin-film synthetic iron disulfide and mineral iron pyrite was studied using a combination of operando mass-spectrometry coupled to ultrahigh vacuum tribochemical cell and these gas expansion system. The composition and kinetics of gas emission were analyzed using an original methodology. It was found that carbon-containing gases were dominating. The sulfur-containing gases comprised H2S, COS and CS2. The latter two were unexpected. The emission of the gases was traced back to solid-state chemical reactions kinetically controlled by the precursor concentrations and driven through non-thermal mechanisms, which we tentatively assigned to formation of sulfur radicals., This work was supported by the Ministry of Science, Innovation and University of Spain (grants PID2019- 111063RB-I00, PID2020-112770RB-C22, PID2020-117573GB-I00, RTI2018-099794-B-I00, and TED2021-129950B-I00). We acknowledge the service from the MiNa Laboratory at IMN and funding from Madrid Community (project S2018/NMT-4291 TEC2SPACE), Ministry of Science, Innovation and Universities of Spain (project CSIC13-4E-1794), and EU (FEDER, FSE) The authors acknowledge the support from The Centre for Micro Analysis of Materials (CMAM)—Universidad Autónoma de Madrid, for the beam time proposal (Analysis of surface elemental transformations induced by mechanochemical reactions with metal sulfides) with code STD-022/23, and its technical staff for their contribution to the operation of the accelerator., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Injectable Carrageenan/Green Graphene Oxide Hydrogel: A Comprehensive Analysis of Mechanical, Rheological, and Biocompatibility Properties

  • Moncada, Danny
  • Bouza, Rebeca
  • Rico, Maite
  • Rodríguez-Llamazares, Saddys
  • Pettinelli, Natalia
  • Aragón-Herrera, Alana
  • Feijóo-Bandín, Sandra
  • Gualillo, Oreste
  • Lago, Francisca
  • Farrag, Yousof
  • Salavagione, Horacio J.
In this work, physically crosslinked injectable hydrogels based on carrageenan, locust bean gum, and gelatin, and mechanically nano-reinforced with green graphene oxide (GO), were developed to address the challenge of finding materials with a good balance between injectability and mechanical properties. The effect of GO content on the rheological and mechanical properties, injectability, swelling behavior, and biocompatibility of the nanocomposite hydrogels was studied. The hydrogels’ morphology, assessed by FE-SEM, showed a homogeneous porous architecture separated by thin walls for all the GO loadings investigated. The rheology measurements evidence that G′ > G″ over the whole frequency range, indicating the dominant elastic nature of the hydrogels and the difference between G′ over G″ depends on the GO content. The GO incorporation into the biopolymer network enhanced the mechanical properties (ca. 20%) without appreciable change in the injectability of the nanocomposite hydrogels, demonstrating the success of the approach described in this work. In addition, the injectable hydrogels with GO loadings ≤0.05% w/v exhibit negligible toxicity for 3T3-L1 fibroblasts. However, it is noted that loadings over 0.25% w/v may affect the cell proliferation rate. Therefore, the nano-reinforced injectable hybrid hydrogels reported here, developed with a fully sustainable approach, have a promising future as potential materials for use in tissue repair., The research was funded by Xunta de Galicia Government: program of consolidation and structuring competitive research units [Grant number: ED431C 2019/17]. The work of Centro de Investigación de Polímeros Avanzados, CIPA is funded by ANID Regional [R23F0005] and the work of N.P is funded by ANID Fondecyt Postdoctoral [3230505]. Y.F is a ‘Sara Borrell’ researcher funded by the Instituto de Salud Carlos III (ISCIII) and co-funded by Fondo Europeo de Desarrollo Regional (FEDER) [CD21/00042]. The work of O.G. (PI20/00902) is funded by ISCIII, FEDER, and Xunta de Galicia, Consellería de Educación, Universidade e Formación Profesional and Consellería de Economía, Emprego e Industria (GAIN) (GPC IN607B2022/03). H.J.S is grateful for the funding from the Ministerio de Ciencia e Innovación, Agencia Estatal de Investigación (AEI), grant PID2020-117573GB-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Hydrothermal Carbonization of Biomass for Electrochemical Energy Storage: Parameters, Mechanisms, Electrochemical Performance, and the Incorporation of Transition Metal Dichalcogenide Nanoparticles

  • Prieto, Manuel
  • Yue, Hangbo
  • Brun, Nicolas
  • Ellis, Gary James
  • Naffakh, Mohammed
  • Shuttleworth, Peter S.
Given the pressing climate and sustainability challenges, shifting industrial processes towards environmentally friendly practices is imperative. Among various strategies, the generation of green, flexible materials combined with efficient reutilization of biomass stands out. This review provides a comprehensive analysis of the hydrothermal carbonization (HTC) process as a sustainable approach for developing carbonaceous materials from biomass. Key parameters influencing hydrochar preparation are examined, along with the mechanisms governing hydrochar formation and pore development. Then, this review explores the application of hydrochars in supercapacitors, offering a novel comparative analysis of the electrochemical performance of various biomass-based electrodes, considering parameters such as capacitance, stability, and textural properties. Biomassbased hydrochars emerge as a promising alternative to traditional carbonaceous materials, with potential for further enhancement through the incorporation of extrinsic nanoparticles like graphene, carbon nanotubes, nanodiamonds and metal oxides. Of particular interest is the relatively unexplored use of transition metal dichalcogenides (TMDCs), with preliminary findings demonstrating highly competitive capacitances of up to 360 F/g when combined with hydrochars. This exceptional electrochemical performance, coupled with unique material properties, positions these biomass-based hydrochars interesting candidates to advance the energy industry towards a greener and more sustainable future, This research was funded by NextGeneration EU via SusPlast; FEDER/Ministerio de Ciencia, Innovación y Universidades-Agencia Estatal de Investigación/MAT2017-84691-P; Subprograma Estatal de Incorporación/IED2019-001134-I; Consejería de Educación e Investigación de la Comunidad de Madrid y del Fondo Social Europeo/PEJD-2019-PRE/IND-16080; Spanish Ministry of Science and Innovation (Project SPoNaFun, PID2020-117573GB-I00); Science and Technology Planning Project of Guangdong Province (2023A0505050163); National Natural Science Foundation of China (22378078); Natural Science Foundation of Guangdong Province (2022A1515011500), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Biobased Polyurethane Adhesives Derived from Vegetable Oil and Rosin for Flexible Packaging Applications

  • Chen, Yuhao
  • Tian, Fanglin
  • Yao, Jiachang
  • Li, Liangjun
  • Cui, Yihua
  • Yang, Hongmei
  • Chen, Zhiguo
  • Sun, Guoxing
  • Shuttleworth, Peter S.
  • Yue, Hangbo
Conventional solvent-based polyurethane (PU) adhesives, widely utilized in the flexible packaging industry, have raised environmental concerns due to their emission of volatile organic compounds during use. Therefore, there is growing interest in the development of solvent-free PU adhesives that offer improved cooking resistance and use environmentally friendly raw materials. Herein, eco-friendly solvent-free PU adhesives derived from biomass sources for flexible packaging applications are reported. Specifically, two biobased polyols were prepared through the ring-opening reaction of epoxy soybean oil with rosin and the reaction of castor oil with 2,2-dimethylolpropionate. The biobased polyols, together with polyester polyols, were then mixed with another adhesive component (prepolymers containing isocyanate) and cured at room temperature, resulting in the PU bioadhesives. The impact of the polyols on the cooking resistance of the bioadhesives was evaluated by peel strength and package-cooking tests. The results revealed that the addition of 10 wt % epoxidized soybean oil/rosin achieved the best adhesive performance. The peel force before and after boiling treatment reached 7.48 and 5.30 N, respectively, an increase of 18.7 and 21.3%, respectively, compared with that of the samples without additives. The introduction of a long-chain fatty acid from vegetable oil and the rigid tricyclic phenanthrene skeleton structure of rosin into the PU adhesives effectively enhanced their hydrothermal and cooking resistance properties. The biomass-based solvent-free PU adhesives developed in this study hold promising potential for partially substituting solvent-based PU adhesives for flexible packaging applications., This work was supported by the National Natural Science Foundation of China (22378078), the Science and Technology P l a n n i n g P r o j e c t o f G u a n g d o n g P r o v i n c e ( n o . 2023A0505050163), and the Natural Science Foundation of Guangdong Province (2022A1515011500). G.S. thanks the financial support from the Science and Technology Develop- ment Fund, Macau SAR (File no. 0138/2020/A3), and the Multi-Year Research Grant (File no. MYRG2022-00217- IAPME) from the University of Macau. P.S.S. gratefully acknowledges the Ministerio de Ciencia e Innovación of Spain (Grant: PID2020-117573GB-I00), funded by MCIN/AEI/ 10.13039/501100011033, and by the “European Union NextGenerationEU/PRTR”. Synchrotron experiments were conducted at the beamline BL16B1 of the Shanghai Synchrotron Radiation Facility with the collaboration of beamline staff., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Understanding pore size relation in cellulose-derived, nitrogen-doped, hydrothermal carbons for improved supercapacitor performance

  • Prieto, M.
  • Ellis, Gary James
  • Budarin, V.
  • Morales, Enrique
  • Naffakh, M.
  • Shuttleworth, Peter S.
This study introduces an eco-friendly approach for synthesising cellulose-derived activated carbons, using hydrothermal carbonisation (HTC) followed by high-temperature pyrolysis. This novel method proves more carbon-efficient than the traditional carbonisation and activation processes. Moreover, we incorporate albumin as a sustainable nitrogen source in the preparation phase, with a view to enhancing the properties of the resulting carbons. We examine the morphological and textural characteristics of the carbons produced using scanning electron microscopy (SEM) and nitrogen sorption analysis. The chemical structure of the activated carbons was characterised using elemental microanalysis, Energy-Dispersive X-ray Spectroscopy (EDX), and X-ray Photoelectron Spectroscopy (XPS). The electrochemical evaluation was conducted in a symmetrical Swagelok cell, with a 2 M HSO aqueous solution electrolyte. The carbons obtained exhibited remarkable electrochemical performance, achieving capacitance values exceeding 275 F g and power densities approaching 3000 W kg. Crucially, we discovered a significant correlation between enhanced material capacitance and the presence of pores of around 4.3 Å, the approximate diameter of the sulfate ion (SO). This work highlights the significance of specific pore size in the electrochemical behaviour of the electrodes, advancing our understanding of the relationship between material structure and performance, and provides insight for the further development of sustainable high-performance materials for energy storage applications., This research was funded by NextGeneration EU via SusPlast; FEDER/Ministerio de Ciencia, Innovación y Universidades-Agencia Estatal de Investigación/MAT2017-84691-P; Subprograma Estatal de Incorporación/IED2019-001134-I; Consejería de Educación e Investigación de la Comunidad de Madrid y del Fondo Social Europeo/PEJD-2019-PRE/IND-16080; Spanish Ministry of Science and Innovation (Project SPoNaFun, PID2020-117573GB-I00); CSIC Program for Scientific Cooperation with Ukraine (No. UCRAN20080). MP would also like to acknowledge CSIC for IMOVE grant (IMOVE23076), for funding a research placement at ICGM-CNRS, where XPS and N2 sorption analyses were carried out under the guidance of Dr Nicolas Brun. The authors also appreciate the assistance of BSc student Beatriz Bispo de Souza for sample preparation and characterization., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Assessing the mechanical behaviour of reusable polyurethane networks with graphene as internal nano-heater

  • Vega, Juan Francisco
  • Salavagione, Horacio J.
  • Nadin-Ambrosio, Fabio
  • Seyler, H.
  • Cardil, A.
  • Gómez-Fatou, Marián A.
  • Flores, Araceli
This article is part of a special issue entitled: POLY-CHAR 2024 published in Polymer, Polyurethane adhesives with thermoreversible Diels Alder (DA) bonds offer a sustainable approach to improve recyclability of multilayer packaging. This study evaluates the effect of graphene, used as an internal heater to trigger bond breakage, on the mechanical properties by indentation and shear rheology. Particular attention is paid to their reversibility and cyclability upon thermal heating or IR irradiation. Graphene initially reduces the modulus by disrupting network formation resulting in reduced DA bond incorporation and crosslink density. The intrinsic properties of graphene counterbalance this effect at higher loadings. Rheology shows that graphene accelerates the retro-DA reaction during conventional thermal heating. Indentation tests indicate that IR expo- sure temporarily reduces the mechanical properties, with full recovery after 100 min. Both rheological and indentation methods show improved mechanical properties (modulus and hardness) after the initial retro-DA reaction, which stabilise after further thermal treatments and are related to the formation of a new network structure., This project has received funding from the Bio Based Industries Joint Undertaking (BBI-JU) under the European Union’s Horizon 2020 research and innovation program under grant agreement Nº 837715. The authors wish to thank the MICIU/AEI/10.13039/501100011033, Spain, for funding under grants PID2019-107710 GB-I00, PID2020- 117573 GB-I00. Project PIE202250E035 (CSIC) is also acknowledged. The TEM-BIOPHYM Service at the IEM-CSIC is acknowledged for granting the use of the rheology facilities., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Indentation creep in polymers and polymer nanocomposites

  • Flores, Araceli
Creep refers to the capacity of a material to bear load and it represents a fundamental property for material design. Indentation appears as a most convenient tool for the study of creep behavior in polymers. The present work gathers information on the indentation creep response of a wide variety of polymers, taken from different sources, and offers a comprehensive overview of the factors that can influence creep. It is shown that viscoplastic behavior assessed by the traditional technique is influenced by the internal polymer characteristics and also by external factors. As a general rule, chain stiffness, chain branching, crystallinity, physical ageing and rigid-filler addition promote creep resistance. The advent of modern instrumented indenters allowed analysis of viscoelastic flow. Interestingly, it is found that the creep parameters obtained from traditional and instrumented testing are in close agreement provided the viscoplastic regime prevails. Graphene-polymer nanocomposites are used to illustrate the reduced creep rate, creep extent and strain rate sensitivity found upon addition of the rigid filler to a number of thermoplastic matrices., This research was funded by Ministerio de Ciencia e Innovación, Agencia Estatal de Investigación (AEI), and Fondo Europeo de Desarrollo Regional (FEDER, UE), grant number PID2020-117573GB-I00. It was also supported by the Bio Based Industries Joint Undertaking (BBI-JU) under the European Union’s Horizon 2020 research and innovation programme (Grant agreement N° 837715).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nanostructured films from poly(3-hexylthiophene)-graft-poly(ε-caprolactone) as light-responsive generators of reactive oxygen species

  • Ilaria, Abdel Aziz
  • Gabirondo, Elena
  • Flores, Araceli
  • Posadas, Pilar
  • Sardon, Haritz
  • Mecerreyes, David
  • Criado-González, Miryam
The design of smart photoelectrodes is used to modulate and control the spatio-temporal production of reactive oxygen species (ROS). In this work, we develop photoactive films with tunable nanostructured morphologies to favor ROS production via photostimulation. To that aim, we synthesized graft copoly- mers, made of poly(3-hexylthiophene) (P3HT) and poly(ε-caprolactone) (PCL), P3HT-g-PCL, which were employed to fabricate compact films by drop casting. The films were further subjected to a thermo-oxi- dative treatment in the presence of H2 O2 at 42 °C. This led to nanostructured films with a porosity (∼500 nm diameter and ∼70 nm height) controlled at specific copolymer compositions, as determined by atomic force microscopy (AFM). The nanostructured P3HT films possess higher storage moduli (E’) than flat P3HT films, as determined by nanoindentation measurements. Finally, the performance of nano- structured P3HT films as photoelectrodes is assessed in a three-electrode electrochemical cell upon visible-light irradiation (λ = 467 nm), leading to the spatiotemporal production of H2 O 2 at non-cytotoxic levels for future non-invasive redox medicine applications., The authors acknowledge the grants PID2020-119026GB-I00 and PID2020-117573GB-I00 funded by MCIN/AEI/10.13039/ 501100011033. M. C.-G. thanks “Ayuda RYC2022-036380-I financiada por MICIU/AEI /10.13039/501100011033 y por el FSE+” and the Emakiker program of POLYMAT (UPV/EHU). This work was funded by the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement no. 101034379., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Lignin-derived porous carbons via nitrogen-enhanced activation for efficient supercapacitors

  • Yi, Minghao
  • Budarin, Vitaliy
  • Yue, Hangbo
  • Tajuelo-Castilla, Guillermo
  • Morales, Enrique
  • Ellis, Gary James
  • Shuttleworth, Peter S.
Lignin, an abundant industrial by-product, has gained attention as a sustainable precursor for porous carbon electrodes in supercapacitors due to its intrinsic aromaticity and high carbon content. While nitrogen doping is known to enhance electrochemical properties, its impact on lignin char activation mechanisms and porosity development remains underexplored. This study reports a novel, microwave-assisted nitrogen doping strategy using ethanolamine, followed by optimised chemical activation leading to the formation of highly porous carbons with enhanced charge storage capabilities. The activated carbon synthesised at an optimal NaOH-to-char weight ratio of 3:1 exhibits a uniformly distributed pore structure, as confirmed by scanning electron microscopy (SEM), along with a high specific surface area of 2749 m2 g-1 and a pore volume of 1.48 cm3 g-1. Elemental Analysis, Raman spectroscopy, and X-ray Photoelectron Spectroscopy provides information on the thermal transformation of nitrogen species upon pyrolysis, and their differential roles in the activation process. Partial least squares (PLS) analysis further confirms that nitrogen functionality loss and activator dosage both govern porosity development. Electrochemical testing using a 2 M H2SO4 electrolyte demonstrates a high specific capacitance of 292 F g-1 at 0.1 A g-1, a remarkable capacitance retention of 90 % after 4000 cycles at 2 A g-1, and an energy density of 9.2 Wh kg-1 at a power density of 1.1 kW kg-1. These results further establish nitrogen-enhanced NaOH activation as an effective route for tailoring porosity and enhancing electrochemical performance, offering a sustainable pathway for the revalorization of lignin into high-performance supercapacitor electrode materials., MHY acknowledges the China Scholarship Council for a doctoral scholarship (CSC No. 202008440497), VB thanks the CSIC-Ukraine Program for a Research Contract (UCRAN20080), and GT-C acknowl- edges funding from the Comunidad Autónoma de Madrid (Grant No. PEJ-2021-AI/IND-21143). This work was supported by the Spanish Government (Grants PID2020-117573GB-I00 and PID2023-149077OB- C33 funded by MICIU/AEI/10.13039/501100011033 and by FEDER UE), and Science and Technology Planning Project of Guangdong Province (2023A0505050163)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Exploring tribochemical transduction pathways for dehydrogenation of molecular hydrides

  • Muñoz-Cortés, Esmeralda
  • Leardini, Fabrice
  • Conte, Marcello
  • Flores, Eduardo
  • Nevshupa, Roman
  • Ares, Jose Ramón
  • Campo, Ángel Adolfo del
Recent research has shown that mechanical energy can trigger dehydrogenation (hydrogen release) from metal and complex hydrides at room temperature, offering an alternative to traditional heat-based methods. This study investigates whether the tribochemical approach can also be effective to release hydrogen from molecular hydrides such as ethane 1,2-diamineborane (EDAB). Surprisingly, despite dehydrogenating at a lower temperature than metal and complex hydrides, EDAB exhibited faint hydrogen release under mechanical stress. To understand this behavior, the tribochemical decomposition pathways of EDAB were investigated using operando Mechanically Stimulated Gas Emission Mass Spectrometry in combination with other surface and material characterization techniques. The lack of hydrogen emission from EDAB is attributed to a combination of strong intramolecular bonds (covalent and dative bonds) within the molecule, and weak intermolecular interactions (hydrogen bonds and van der Waals forces) between EDAB molecules., Authors thank to J. F. Fern\u00E1ndez and M. Manso Silvan from UAM for valuable discussion. The technical assistance of S. Guerra is also acknowledged. This work was supported by the Ministry of Science and Innovation of Spain (grants PID2019-111063RB-I00, PID2020-112770RB-C22, PID2020-117573GB-I00, RTI2018-099794-B-I00, and TED2021-129950B-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The influence of thermal history on the microstructure of polylactic acid-bentonite nanocomposites. A wide- and small angle X-ray scattering study

  • Vargas-Villagran, Haydee
  • Flores, Araceli
  • Diez-Pascual, Ana Maria
  • Reyes-Mayer, Adriana
  • Romo-Uribe, Angel
The influence of thermal history on the microstructure at Å- and nm-range of polylactic acid (PLA) reinforced with natural nanoclay bentonite was investigated using wide- and small-angle X-ray scattering (WAXS and SAXS, respectively). Nanoclay was incorporated into PLA by solution mixing and the concentration c<inf>bentonite</inf> ranged from 1 to 7 wt%. In as-cast films, at c<inf>bentonite</inf><3 wt% it was produced an exfoliated morphology. However, at c<inf>bentonite</inf>≥3 wt% the morphology transitioned into an intercalated morphology. The degree of crystallinity χ was determined by WAXS and Ruland's method, and the lamellar thickness L<inf>γ</inf> was determined by correlation function analysis of SAXS intensity traces. In the as-cast films, both χ and L<inf>γ</inf> were an increasing function of c<inf>bentonite</inf> suggesting that bentonite acted as nucleating agent. Moreover, the nanoclay gallery spacing decreased when c<inf>bentonite</inf> increased. Recrystallization by slow cooling from the melt increased χ and L<inf>γ</inf>. The morphology, however, remained unchanged although the gallery spacing was slightly reduced. Thermal annealing of the cast films at 100 °C induced over four-fold increase of χ. Furthermore, L<inf>γ</inf> first increased over 50% relative to as-cast films, but at c<inf>bentonite</inf>≥3 wt% L<inf>γ</inf> decreased. The increase of χ and decrease of L<inf>γ</inf> at higher bentonite content after annealing indicate an increased number of crystallites with crystal size growth restricted by nanoclay confinement. Finally, bentonite increased the thermal decomposition temperature T<inf>dec</inf> up to 50 °C, and the hardness H increased nearly 100%, relative to neat PLA., H. V–V acknowledges the financial support of the Mexican Council for Science and Technology, CONACyT. AF acknowledges the grant PID2020-117573GB-I00 funded 501100011033, Spain., Peer reviewed
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Injectable Carrageenan/Green Graphene Oxide Hydrogel: A Comprehensive Analysis of Mechanical, Rheological, and Biocompatibility Properties

  • Moncada-Villalobos, Danny
  • Bouza, Rebeca
  • Rico, Maite
  • Rodríguez-Llamazares, Saddys
  • Pettinelli, Natalia
  • Aragón Herrera, Alana
  • Feijóo-Bandín, Sandra
  • Gualillo, Oreste
  • Lago, Francisca
  • Farrag, Yousof
  • Salavagione, Horacio
[Abstract] In this work, physically crosslinked injectable hydrogels based on carrageenan, locust bean gum, and gelatin, and mechanically nano-reinforced with green graphene oxide (GO), were developed to address the challenge of finding materials with a good balance between injectability and mechanical properties. The effect of GO content on the rheological and mechanical properties, injectability, swelling behavior, and biocompatibility of the nanocomposite hydrogels was studied. The hydrogels’ morphology, assessed by FE-SEM, showed a homogeneous porous architecture separated by thin walls for all the GO loadings investigated. The rheology measurements evidence that G′ > G″ over the whole frequency range, indicating the dominant elastic nature of the hydrogels and the difference between G′ over G″ depends on the GO content. The GO incorporation into the biopolymer network enhanced the mechanical properties (ca. 20%) without appreciable change in the injectability of the nanocomposite hydrogels, demonstrating the success of the approach described in this work. In addition, the injectable hydrogels with GO loadings ≤0.05% w/v exhibit negligible toxicity for 3T3-L1 fibroblasts. However, it is noted that loadings over 0.25% w/v may affect the cell proliferation rate. Therefore, the nano-reinforced injectable hybrid hydrogels reported here, developed with a fully sustainable approach, have a promising future as potential materials for use in tissue repair., The research was funded by Xunta de Galicia Government: program of consolidation and structuring competitive research units [Grant number: ED431C 2019/17]. The work of Centro de Investigación de Polímeros Avanzados, CIPA is funded by ANID Regional [R23F0005] and the work of N.P is funded by ANID Fondecyt Postdoctoral [3230505]. Y.F is a ‘Sara Borrell’ researcher funded by the Instituto de Salud Carlos III (ISCIII) and co-funded by Fondo Europeo de Desarrollo Regional (FEDER) [CD21/00042]. The work of O.G. (PI20/00902) is funded by ISCIII, FEDER, and Xunta de Galicia, Consellería de Educación, Universidade e Formación Profesional and Consellería de Economía, Emprego e Industria (GAIN) (GPC IN607B2022/03). H.J.S is grateful for the funding from the Ministerio de Ciencia e Innovación, Agencia Estatal de Investigación (AEI), grant PID2020-117573GB-I00., Xunta de Galicia; ED431C2019/17, Xunta de Galicia; IN607B2022/03, Chile. Agencia Nacional de Investigación y Desarrollo; R23F0005, Chile. Agencia Nacional de Investigación y Desarrollo; 3230505