Skip to main content

FIBRAS Y TEJIDOS POLIMERICOS AVANZADOS CON GRAFENO, OTROS MATERIALES 2D Y ESTRUCTURAS MESOPOROSAS DE FUENTES DE ORIGEN NATURAL

MAT2017-88382-P

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D (Excelencia / Generación de Conocimiento)
Call year 2017
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nanoindentation mapping of multiscale composites of graphene-reinforced polypropylene and carbon fibres

  • Enrique-Jiménez, Patricia
  • Quiles-Díaz, Susana
  • Salavagione, Horacio J.
  • Fernández-Blázquez, J. P.
  • Monclús, M.A.
  • Guzmán de Villoria, R.
  • Gómez-Fatou, Marián A.
  • Ania, F.
  • Flores, Araceli
The local mechanical properties of hierarchically reinforced laminates of graphene-isotactic polypropylene (iPP) and carbon fibres are investigated by nanoindentation. Carbon fibre fabrics are alternated with films of iPP reinforced with different graphene contents and types (pristine and modified with iPP brushes). The distribution of the mechanical data obtained around one isolated carbon fibre at the boundary with the polymer layer is compared with a similar analysis far away from any fibre. In the case of neat iPP, a high E′ tail can be identified with a micrometre-sized interphase showing distinct properties from those of the polymer matrix. With increasing amount of graphene, the E′ distribution including the high E′ tail progressively shifts to higher values. It is suggested that graphene platelets accumulate at the front of the ply due to the filtering effect of the carbon fibres giving rise to a transition region, superimposed on the interphase, with enhanced properties. Nanoindentation studies reveal that the chemical modification of graphene by short-chain iPP lowers the reinforcement of the nanofiller, both near and far away from the fibres front. On the other hand, indentation push-in tests suggest that modified graphene increases the resistance of the laminate under shear stress conditions. However, from the point of view of overall performance, it lowers the electrical conductivity across the laminate. The work offers a discussion of the role of graphene type and content on the properties of the multiscale composite., Financial support from MINECO (Ministerio de Economía y Competitividad), Spain, under grants MAT2013-47898-C2-1-R, MAT2013- 47898-C2-2-R and MAT2017-88382-P is gratefully acknowledged. PEJ and SQ also acknowledge MINECO for a FPI fellowship. We are also indebted to the Department of Crystallography (IQFR, CSIC) for providing Xray diffraction facilities. Authors wish to thank Dr. Nuria García (ICTPCSIC) for profilometry measurements and Mr. David Gómez of the Characterization Service of ICTP-CSIC, for SEM studies., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Adamantane-Based Micro- and Ultra-Microporous Frameworks for Efficient Small Gas and Toxic Organic Vapor Adsorption

  • Jiang, Wenzhao
  • Yue, Hangbo
  • Shuttleworth, Peter S.
  • Xie, Pengbo
  • Li, Shanji
  • Guo, Jianwei
Microporous organic polymers and related porous materials have been applied in a wide range of practical applications such as adsorption, catalysis, adsorption, and sensing fields. However, some limitations, like wide pore size distribution, may limit their further applications, especially for adsorption. Here, micro- and ultra-microporous frameworks (HBPBA-D and TBBPA-D) were designed and synthesized via Sonogashira–Hagihara coupling of six/eight-arm bromophenyl adamantane-based “knots” and alkynes-type “rod” monomers. The BET surface area and pore size distribution of these frameworks were in the region of 395–488 m2 g−1, 0.9–1.1 and 0.42 nm, respectively. The as-made prepared frameworks also showed good chemical ability and high thermal stability up to 350 ◦C, and at 800 ◦C only 30% mass loss was observed. Their adsorption capacities for small gas molecules such as CO2 and CH4 was 8.9–9.0 wt % and 1.43–1.63 wt % at 273 K/1 bar, and for the toxic organic vapors n-hexane and benzene, 104–172 mg g−1 and 144–272 mg g−1 at 298 K/0.8 bar, respectively. These are comparable to many porous polymers with higher BET specific surface areas or after functionalization. These properties make the resulting frameworks efficient absorbent alternatives for small gas or toxic vapor capture, especially in harsh environments., This research was funded by National Natural Science Foundation of China (Nos. 21476051, 21706039), Natural Science Foundation of Guangdong Province (No. 2017A030310300, 2016A030310349), Science and Technology Program of Guangzhou City (No. 201704030075), and an Innovation Team Project in Universities of Guangdong Province (No. 2017GKCXTD006). PSS also acknowledges the Spanish Ministry Economy and Competitivity (MINECO) for a Ramón y Cajal fellowship (RYC-2014-16759) and a Proyecto de Investigación en el Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia (MAT2017-88382-P)., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Preparation of piezo-resistive materials by combination of PP, SEBS and graphene

  • Seyler, Helga
  • Gómez-Fatou, Marián A.
  • Salavagione, Horacio J.
© 2019 by the authors., The use of polyolefins in structural components requires the simultaneous improvement of stiffness and toughness of the matrix, whilst in the case of sensing components during operation, additional functions are needed such as electrical conductivity. However, providing various desired properties without impairing those intrinsic to the materials can be somewhat challenging. In this study we report the preparation of an isotactic polypropylene (iPP)/styrene–ethylene–butylene–styrene triblock copolymer (SEBS)/graphene system that combines enhanced mechanical properties with electrical conductivity. Blends were prepared by solution mixing (SoM) and solution/solid state mixing (SoM/SSM) formulation routes prior to melt processing. The nanocomposites were characterized by scanning electron microscopy (SEM) and thermogravimetric analysis (TGA) and the electrical and mechanical properties were evaluated. The materials prepared via the SoM/SSM route displayed good electrical conductivity while retaining the mechanical properties of iPP, making them attractive materials for low cost and high throughput structural components with sensing capacity., This research was funded by the Spanish government (MINECO), grant number MAT2017-88382-P., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Determination of cross-sectional area of natural plant fibres and fibre failure analysis by in situ SEM observation during microtensile tests

  • Yue, H.
  • Rubalcaba, J. C.
  • Cui, Y.
  • Fernández-Blázquez, J. P.
  • Yang, C.
  • Shuttleworth, Peter S.
Abstract: Reported tensile mechanical properties of many natural plant fibres vary to a large extent due to very often inappropriate measurement of the fibre’s cross-sectional area by diameter estimation. Using natural ramie filament as a model testing elementary fibre, a more realistic stereological determination is presented, including microscopic imaging analysis of the fibres’ cross-sectional area. When applying the area data using this approach to calculate tensile strength, a far narrower variation in the fibres’ strength distribution according to Weibull analysis was found. The gauge length effects on the mechanical performance of the natural fibre were revealed and analysed. In addition, in situ SEM observations during microtensile measurements detected real time changes in the fibres’ structure during stress. It was found that fibre failure was mainly caused by macroscopic physical defects and associated microscopic slippage of the microfibrils. Furthermore, results of cyclic tensile tests indicated that the fibre underwent elastic deformations under progressive loading–unloading cycles, which is due to bonding restriction that the surrounding matrix presents against the slippage of the microfibrils and reorganisation of hydrogen bonds. Graphical abstract: [Figure not available: see fulltext.]., The authors are thankful for financial support from the National Natural Science Foundation of China (21706039, 21676058) and the Natural Science Foundation of Guangdong Province (2017A030310300, 2016A030313694). PSS also gratefully acknowledges the Spanish Ministry Economy and Competitivity (MINECO) for a Ramón y Cajal fellowship (RYC-2014-16759) and a Proyecto de Investigación en el Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia (MAT2017-88382-P). We are grateful to Dr. Alvaro Ridruejo and Editor Alfred D. French, Ph.D. for their kind suggestion and discussion, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enhanced Thermal Conductivity in Polymer Nanocomposites via Covalent Functionalization of Boron Nitride Nanotubes with Short Polyethylene Chains for Heat-Transfer Applications

  • Quiles-Díaz, Susana
  • Martínez-Rubí, Y.
  • Guan, J.
  • Kim, K.S.
  • Couillard, M.
  • Salavagione, Horacio J.
  • Gómez-Fatou, Marián A.
  • Simard, B.
Boron nitride, which possesses high thermal conductivity, is often incorporated into polymer matrixes for thermal management. The enhancement in the thermal conductivity depends on the filler shape, size, effective dispersion in the matrix, and interfacial thermal resistance between the filler and matrix, and the last two are the most challenging issues. To address these challenges, in this study two different covalent functionalization approaches on boron nitride nanotubes (BNNTs) with short polyethylene (PE) chains are employed: one based on the Williamson reaction and the other on nitrene [1 + 2] chemistry. The covalent connection between the nanotubes and the polymer is confirmed by Fourier transform infrared, X-ray photoelectron microscopy, tandem thermogravimetric-infrared spectroscopy analysis and energy-filtered transmission electron microscopy. The modification of BNNTs with short polymer chains has resulted in an excellent strategy to modulate the interface in polymer composites. Tuning the interface has a strong influence on thermal transport, and up to an ∼250% increase in the thermal conductivity of BNNT-HDPE nanocomposites has been observed when the loading increases from 20 to 40 wt % of PE-modified BNNTs due to the improved dispersion and reduced interfacial thermal resistance. The materials described here show the potential for heat-transfer applications., Financial support from Spain (Grants MAT2013-47898-C2-2R and MAT2017-88382-P) and CSIC (Grant 201760I084) is gratefully acknowledged. S.Q.-D. acknowledges MINEICO for the FPI Fellowship and for a grant under the Predoctoral Mobility Program (EEBB-I-17-12247) and the hospitality of the National Research Council Canada (NRC). The authors are indebted to Malgorzata Daroszewska for the TGA and DVS measurements, to Gordon Chan for recording the SEM images of the nanotubes, to Oltion Kodra for taking the XPS measurements, to Prof. Luis Barral from University of Coruña for his help with the thermal conductivity measurements, to Prof. Rosario Benavente (ICTP-CSIC) for her help with the Cp and POM measurements, and to David Gómez of the Characterization Service of the Institute of Polymer Science & Technology for his assistance in the SEM/EDX measurements of nanocomposites. This work was partly supported by the Security Materials Technologies Program of the NRC (Grant A1-9469).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Creep behaviour of elastomeric nanocomposites by flat punch indentation: Influence of graphene modification and content

  • Ania, F.
  • Gómez-Fatou, Marián A.
  • Salavagione, Horacio J.
  • Enrique-Jiménez, Patricia
  • Quiles-Díaz, Susana
  • Flores, Araceli
Creep can be understood as the resistance of a material to a continuous stress and represents an important property for engineering design. The creep behaviour of a series of nanocomposites with electromechanical applications based on a thermoplastic elastomer, poly(styrene-b-ethylene-co-butylene-b-styrene) (SEBS), and small amounts of graphene has been explored using cylindrical flat punch depth-sensing indentation. Special attention is paid to the influence of the nature of the polymer brushes (polyethylene or polystyrene) attached to the graphene surface. Common methodologies for indentation creep analysis are critically examined and brought together to provide a comprehensive picture of creep deformation. It is found that graphene significantly reduces the creep rate and this is most significant under viscoplastic deformation than in the linear viscoelastic regime. Most interesting, polyethylene branches reduce visco-elastic-plastic flow in a more effective manner and this is attributed to the selective interaction of the filler with the matrix chains., Financial support from MINECO (Ministerio de Economía y Competitividad), Spain, under grants MAT2013-47898-C2-1-R, MAT2013- 47898-C2-2-R and MAT2017-88382-P is gratefully acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Graphene and Polyethylene: A Strong Combination Towards Multifunctional Nanocomposites

  • López-González, Mar
  • Flores, Araceli
  • Marra, Fabrizio
  • Ellis, Gary James
  • Gómez-Fatou, Marián A.
  • Salavagione, Horacio J.
© 2020 by the authors., The key to the preparation of polymer nanocomposites with new or improved properties resides in the homogeneous dispersion of the filler and in the efficient load transfer between components through strong filler/polymer interfacial interactions. This paper reports on the preparation of a series of nanocomposites of graphene and a polyolefin using different experimental approaches, with the final goal of obtaining multifunctional materials. A high-density polyethylene (HDPE) is employed as the matrix, while unmodified and chemically modified graphene fillers are used. By selecting the correct combination as well as the adequate preparation process, the nanocomposites display optimized thermal and mechanical properties, while also conferring good gas barrier properties and significant levels of electrical conductivity., The Ministerio de Ciencia, Innovación y Universidades (MCIU), Agencia Estatal de Investigación (AEI) and Fondo Europeo de Desarrollo Regional (FEDER, UE) through the projects: MAT2017-88382-P and PGC2018-095364-B-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Exceptionally Stable Microporous Organic Frameworks with Rigid Building Units for Efficient Small Gas Adsorption and Separation

  • Wen, W.
  • Shuttleworth, Peter S.
  • Yue, H.
  • Fernández-Blázquez, J. P.
  • Guo, J.
Three microporous organic frameworks (hereafter denoted as MPOF-Ads) based on a rigid adamantane core have been successfully synthesized via Sonogashira-Hagihara polycondensation coupling in high yields, 83.7-94.6%. The obtained amorphous MPOF-Ads networks have high Brunauer-Emmett-Teller surface areas (up to 737.3 m g), narrow pore size distribution (0.95-1.06 nm), and superior thermal (the initial decomposition temperature T under an N atmosphere can reach 410 °C) and chemical stability (no apparent degradation in common organic solvents or strong acid/base solutions after 7 days). At 273 K and 1.0 bar, these MPOF-Ads networks present good uptake capacities for small gas molecules (13.9 wt % CO and 1.66 wt % CH) for which the presence of high surface area, predominant microporosity, and narrow pore size distribution are beneficial. In addition, the as-prepared MPOF-Ads networks possess moderate isosteric heats for CO (Q = 19.5-30.3 kJ mol) and show desired CO/N and CO/CH selectivity (36.3-38.4 and 4.1-4.3 based on Henry's law and 17.88-24.92 and 4.24-5.70 based on ideal adsorbed solution theory, respectively). With the demonstrated properties, the synthesized MPOF-Ads networks display potential for small gas storage and separation that can be used in harsh environments because of their superior physical and chemical stability., This work was supported by the National Natural Science Foundation of China (nos. 21476051, 21706039), Natural Science Foundation of Guangdong Province (no. 2017A030310300), Science and Technology Program of Guangzhou City (no. 201704030075), and Innovation Team Project in Universities of Guangdong province (no. 2017GKCXTD006). P.S.S. acknowledges the Spanish Ministry of Economy and Competitivity (MINECO) for a Ramón y Cajal fellowship (RYC-2014-16759) and the Proyecto de Investigación en el Programa Estatal de Fomento de la Investigacioń Cientifí ca y Teć nica de Excelencia (MAT2017- 88382-P). The authors are grateful to Wenzhao Jiang for her help with the sample (MPOF-Ads) synthesis experiments. We also thank Dr. Z. Lin for his kind suggestions on the “Introduction”
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Scalable graphene-based nanocomposite coatings for flexible and washable conductive textiles

  • Salavagione, Horacio J.
  • Shuttleworth, Peter S.
  • Fernández-Blázquez, J. P.
  • Ellis, Gary James
  • Gómez-Fatou, Marián A.
Graphene has recently become one of the preferred conductive materials for smart textiles. The most widely employed strategy to integrate graphene into textiles consists of coating the surface of the target substrate. However, this approach presents limitations related to the preparation of the coating material and its performance during work. Herein we introduce a new concept for the coating of conductive carbon-based materials on textiles by using a nanocomposite ink composed of graphene and an elastomer, in a low boiling point solvent. It allows coating large areas of textiles in a short time and the covering layer presents good elasticity making it durable under strong mechanical deformation. In addition, the apolar nature of the coating confers washing resistance to the textiles. Furthermore, the approach is broad in scope as the coating behaves similarly on both synthetic (Nylon, polyester, acrylic) or natural (cotton, cellulose) textiles., Authors thank to the Spanish Ministerio de Ciencia e Innovacion for the financial support, under the grant Nº MAT2017-88382-P, and P.S. Shuttleworth also thanks the same Ministry for a Ramon y Cajal research fellowship.We also thank Miss. Isabel Mu~noz-Ochando of the Raman Microscopy Service of the Institute of Polymer Science & Technology for recording many of the Raman measurements reported in this manuscript.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Physically-crosslinked polyvinyl alcohol composite hydrogels containing clays, carbonaceous materials and magnetic nanoparticles as fillers

  • Sánchez, Laura M.
  • Shuttleworth, Peter S.
  • Waiman, C.
  • Zanini, G.
  • Álvarez, V. A.
  • Ollier, R. P.
Polyvinyl alcohol (PVA)/ Bentonite, acid-modified Bentonite, magnetic nanoparticles and mesoporous carbonaceous composite hydrogels were synthesized via an eco-friendly freeze-thawing technique, which is a simple and non-toxic crosslinking methodology. After thorough characterisation using X-Ray Diffraction (XRD), Scanning Electron microscopy (SEM), Dynamic Scanning Calorimetry (DSC), Thermogravimetric Analysis (TGA) and swelling assessment. Furthermore, the prepared materials were tested in order to explore their cadmium adsorption potential, a heavy metal usually found as a pollutant in water bodies. The data obtained showed that PVA has no affinity for cadmium ions but the incorporation of the different fillers makes the materials develop important adsorbent characteristics. Under the selected working conditions, and for a contact time of 1440 min, the maximum amount of cadmium ions adsorbed was 50.9 mg/g, 33.9 mg/g, 42.6 mg/g and 30.5 mg/g for composites containing bentonite; acid-modified bentonite; magnetic nanoparticles and carbonaceous materials, respectively. For all cases the higher the filler amounts the higher the adsorption efficiency., The authors acknowledge the financial support of CONICET, Universidad Nacional de Mar del Plata, ANPCyT and Fundación Bunge & Born. PSS also acknowledges financial support from the Spanish Ministry Economy and Competitivity (MINECO) for a Ramón y Cajal fellowship (RYC-2014-16759) and a Proyecto de Investigación en el Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia (MAT2017-88382-P).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Understanding the reinforcement of graphene in poly(Ether ether ketone)/carbon fibre laminates

  • Flores, Araceli
  • Quiles-Díaz, Susana
  • Enrique-Jiménez, Patricia
  • Martínez-Gómez, Aránzazu
  • Gómez-Fatou, Marián A.
  • Salavagione, Horacio J.
PEEK appears as an excellent candidate to substitute epoxy resins in carbon fibre laminates for high-performance aeronautical applications. The optimization of the properties and, in particular, of the transition region between the fibres and the matrix appear as a major issue prior to serial pro-duction. Graphene, modified with two compatibilizers, has been incorporated in the polymer layer with the purpose of imparting additional functionalities and enhancing the matrix-fibre interaction. It is found that both carbon fibres and modified graphene significantly influence the crystallization behaviour and smaller, and/or more imperfect crystals appear while the degree of crystallinity de-creases. Despite this, nanoindentation studies show that the PEEK layer exhibits significant modulus improvements (≈30%) for 5 wt.% of graphene. Most importantly, the study of the local mechanical properties by nanoindentation mapping allows the identification of remarkably high modulus values close to the carbon fibre front. Such a relevant mechanical enhancement can be associated with the ac-cumulation of graphene platelets at the polymer–fibre boundary, as revealed by electron microscopy studies. The results offer a feasible route for interlaminar mechanical improvement based on the higher density of graphene platelets at the fibre front that should promote interfacial interactions. Concerning electrical conductivity, a large anisotropy was found for all laminates, and values in the range ~10 S/cm were found for the through-thickness arrangement as a consequence of the good consolidation of the laminates., The Ministerio de Ciencia, Innovación y Universidades (MCIU), Agencia Estatal de In- vestigación (AEI) and Fondo Europeo de Desarrollo Regional (FEDER, UE) through the project MAT2017-88382-P.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Sequential Crystallization and Multicrystalline Morphology in PE- b-PEO- b-PCL- b-PLLA Tetrablock Quarterpolymers

  • Matxinandiarena, Eider
  • Múgica, A.
  • Tercjak, A.
  • Ladelta, V.
  • Zapsas, G.
  • Hadjichristidis, Nikos
  • Cavallo, D.
  • Flores, Araceli
  • Müller, A.J.
We investigate for the first time the morphology and crystallization of two novel tetrablock quarterpolymers of polyethylene (PE), poly(ethylene oxide) (PEO), poly(ϵ-caprolactone) (PCL), and poly(l-lactide) (PLLA) with four potentially crystallizable blocks: PE187.1-b-PEO3715.1-b-PCL2610.4-b-PLLA197.6 (Q1) and PE299.5-b-PEO268.8-b-PCL237.6-b-PLLA227.3 (Q2) (superscripts give number average molecular weights in kg/mol, and subscripts give the composition in wt %). Their synthesis was performed by a combination of polyhomologation (C1 polymerization) and ring-opening polymerization techniques using a ″catalyst-switch″ strategy, either ″organocatalyst/metal catalyst switch″ (Q1 sample, 96% isotactic tetrads) or ″organocatalyst/organocatalyst switch″ (Q2 sample, 84% isotactic tetrads). Their corresponding precursors - triblock terpolymers PE-b-PEO-b-PCL, diblock copolymers PE-b-PEO, and PE homopolymers - were also studied. Cooling and heating rates from the melt at 20 °C/min were employed for most experiments: differential scanning calorimetry (DSC), polarized light optical microscopy (PLOM), in situ small-angle X-ray scattering/wide-angle X-ray scattering (SAXS/WAXS), and atomic force microscopy (AFM). The direct comparison of the results obtained with these different techniques allows the precise identification of the crystallization sequence of the blocks upon cooling from the melt. SAXS indicated that Q1 is melt miscible, while Q2 is weakly segregated in the melt but breaks out during crystallization. According to WAXS and DSC results, the blocks follow a sequence as they crystallize: PLLA first, then PE, then PCL, and finally PEO in the case of the Q1 quarterpolymer; in Q2, the PLLA block is not able to crystallize due to its low isotacticity. Although the temperatures at which the PEO and PCL blocks and the PE and PLLA blocks crystallize overlap, the analysis of the intensity changes measured by WAXS and PLOM experiments allows identifying each of the crystallization processes. The quarterpolymer Q1 remarkably self-assembles during crystallization into tetracrystalline banded spherulites, where four types of different lamellae coexist. Nanostructural features arising upon sequential crystallization are found to have a relevant impact on the mechanical properties. Nanoindentation measurements show that storage modulus and hardness of the Q1 quarterpolymer significantly deviate from those of the stiff PE and PLLA blocks, approaching typical values of compliant PEO and PCL. Results are mainly attributed to the low crystallinity of the PE and PLLA blocks. Moreover, the Q2 copolymer exhibits inferior mechanical properties than Q1, and this can be related to the PE block within Q1 that has thinner crystal lamellae according to its much lower melting point., This work has received funding from MINECO through projects MAT2017-83014-C2-1-P and MAT2017-88382-P, from the Basque Government through grant IT1309-19, and from the ALBA synchrotron facility through granted proposal u2020084441 (March 2020). We would like to thank the financial support provided by the BIODEST project; this project has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement no. 778092.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Supercapacitor electrode materials from sustainably-derived nanocomposite-enhanced mesoporous carbons

  • Shuttleworth, Peter S.
  • Prieto, Manuel
  • Morales, Ernesto
  • Budarin, Vitaliy L.
  • Ellis, Gary James
Mesoporous carbons (MCs) are used in a wide variety of applications that depend on the mass transport of substances to the surface, such as, catalysis, chromatography, adsorption and also Electrical Double Layer Capacitor (EDLC) applications.[1] However, traditional commercial production of these materials relies on the non-sustainable use of a silica template and its subsequent removal with hazardous chemicals. Over recent years, the interest in MCs or porous carbons in general has seen exponential growth with the increasing use and need for new electrode materials for EDLCs and batteries. Considering the general consensus that we must seek and adopt more sustainable materials and practices, the focus to prepare MCs has shifted to more naturally-sourced precursors and sustainable methodologies, like hydrothermal carbonisation (HTC) followed by activation or use of soft-templates and HTC, albeit other soft-templated methodologies have also been reported.[2] In addition, it has been found that the use of certain polysaccharides can completely eliminate the need for templates and activation to produce MCs.[3] Here, the mesoporous structure forms during the gelation and setting stage (retrogradation for starch) of the polysaccharide that afterwards can be pyrolysed. As template removal is unnecessary, the materials can be heated to various temperatures in order to tune their final composition, and are trademarked as Starbon®.[4] These materials can be produced in both powder and monolithic forms, the latter being useful to produce binder-free electrodes.[5] Herein we report on the synthesis of a sustainable MC - carbon nanoparticle (CNP) composite monolith, denominated Starene®, and demonstrate its use as a EDLC electrode. Additionally, we explore the effect the NP has on the MCs conductivity and textural properties., This study was supported by the Spanish Ministry Economy and Competitivity (MINECO) via an excellence project (MAT2017-88382-P) and a Ramón y Cajal fellowship (RYC-2014-16759).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

PET/Graphene Nanocomposite Fibers Obtained by Dry-Jet Wet-Spinning for Conductive Textiles

  • León-Boigues, Laia
  • Flores, Araceli
  • Gómez-Fatou, Marián A.
  • Vega, Juan Francisco
  • Ellis, Gary James
  • Salavagione, Horacio J.
The combination of polyethylene terephthalate (PET), one of the most used polymers in the textile industry, with graphene, one of the most outstanding conductive materials in recent years, represents a promising strategy for the preparation of conductive textiles. This study focuses on the preparation of mechanically stable and conductive polymer textiles and describes the preparation of PET/graphene fibers by the dry-jet wet-spinning method from nanocomposite solutions in trifluoroacetic acid. Nanoindentation results show that the addition of a small amount of graphene (2 wt.%) to the glassy PET fibers produces a significant modulus and hardness enhancement (≈10%) that can be partly attributed to the intrinsic mechanical properties of graphene but also to the promotion of crystallinity. Higher graphene loadings up to 5 wt.% are found to produce additional mechanical improvements up to ≈20% that can be merely attributed to the superior properties of the filler. Moreover, the nanocomposite fibers display an electrical conductivity percolation threshold over 2 wt.% approaching ≈0.2 S/cm for the largest graphene loading. Finally, bending tests on the nanocomposite fibers show that the good electrical conductivity can be preserved under cyclic mechanical loading., This research was funded by Ministerio de Ciencia e Innovación, Agencia Estatal de Investigación (AEI), and Fondo Europeo de Desarrollo Regional (FEDER, UE), grant numbers MAT2017-88382-P and PID2020-117573GB-I00. L.L.-B. acknowledges a Margarita Salas research contract supported by the Spanish “Ministerio de Ciencia, Innovación y Universidades” financed with EU Next Generation funds, Peer reviewed