Skip to main content

ENSAMBLADO DE POLIMEROS BIODEGRADABLES DESDE LA MACRO A LA NANOESCALA. PROCESABILIDAD-ESTRUCTURA/PROPIEDADES-APLICACIONES

MAT2017-83014-C2-1-P

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D (Excelencia / Generación de Conocimiento)
Call year 2017
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DEL PAIS VASCO EUSKAL HERRIKO UNIBERTSITATEA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 18
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Local and controlled release of tamoxifen from multi (layer-by-layer) alginate/chitosan complex systems

  • Criado-González, Miryam
  • Fernández-Gutiérrez, Mar
  • San Román, Julio
  • Mijangos, Carmen
  • Hernández, Rebeca
Herein, multilayer polysaccharide films were proposed and characterized as biomaterials for the local and controlled release of an antitumoral drug. To that aim, multilayer films of alginate (Alg) and chitosan (Chi) were built up through spray assisted layer-by-layer (LbL) technique employing an automatic equipment. A specific drug against breast cancer, tamoxifen (TMX), was incorporated in different intermediate positions of the multilayer Alg/Chi films. Our findings highlight that Alg/Chi multilayer films can be employed for sustained and local TMX delivery and their therapeutic effect can be modulated and optimized by the number of bilayers deposited over the loaded tamoxifen, the quantity of tamoxifen loaded in several intermediate positions and the total area of the film., The authors would like to thank Rosa Ana Ramirez and Raquel de Roba for their assistance regarding cell culture experiments. Financial support from MINECO (MAT2017-83014-C2-1-P and MAT2017-84277- R) is gratefully acknowledged. Rebeca Hernández thanks MEC for a Ramón y Cajal contract and Miryam Criado thanks MEC for a FPU fellowship., Peer reviewed, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Differences between isotropic and self-nucleated PCL melts detected by dielectric experiments

  • Sangroniz, L.
  • Alamo, R. G.
  • Cavallo, Dario
  • Santamaria, Andreas
  • Müller, Alejandro J.
  • Alegría, Ángel
Melt memory effects on polymer crystallization are commonly reported in the literature, even when they are not completely understood. In particular, the exact nature of the melt heterogeneities that cause an enhanced nucleation (i.e., the >self-nuclei>) is unknown. This is partly due to sensitivity limitations of the experimental techniques employed to study melt memory. In this work, the melt memory effect of semicrystalline polymers is studied for the first time by dielectric measurements. Polycaprolactones of two different molecular weights have been investigated. Isotropic or self-nucleated melt states are obtained, at a given experimental temperature, by cooling from the isotropic melt or heating from the semicrystalline solid, respectively. A detectable decrease in electrical permittivity is obtained for a self-nucleated melt, consistent with the presence of molecular dipoles with restricted mobility in the case of samples displaying crystalline memory. The volume fraction of repeating units involved in the formation of self-nuclei is estimated to be lower than 0.4%. The relative difference in dielectric permittivity between self-nucleated and isotropic melt state shows excellent correlation with rheological measurements that detect an increase in Newtonian viscosity and with the enhancement of nucleation density, measured by DSC. Each of these measured parameters showed a different sensitivity to the presence of self-nuclei, which is linked both to their nature and to the features of the specific measurements. It is suggested that the relatively strong memory effect displayed by PCL, which can be evidenced by different techniques, is related to the presence of weak intermolecular hydrogen-bonding interactions., R.G.A. acknowledges support by the USA National Science Foundation, Grant DMR 1607786. The UPV/EHU team acknowledges funding from the following projects: Mineco MAT2014-53437-C2-P, MAT2017-83014-C2-1-P, and Basque Government IT586-13. L.S. gratefully acknowledges a FPU thesis grant from Spanish Government., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Polysaccharide Coating of Gelatin Gels for Controlled BSA Release

  • Gonzalez, Jimena S.
  • Mijangos, Carmen
  • Hernández, Rebeca
Self-assembly of natural polymers constitute a powerful route for the development of functional materials. In particular, layer-by-layer (LBL) assembly constitutes a versatile technique for the nanostructuration of biobased polymers into multilayer films. Gelatin has gained much attention for its abundance, biodegradability, and excellent gel-forming properties. However, gelatin gels melt at low temperature, thus limiting its practical application. With respect to the above considerations, here, we explored the potential application of gelatin gels as a matrix for protein delivery at physiological temperature. A model protein, bovine serum albumin (BSA), was encapsulated within gelatin gels and then coated with a different number of bilayers of alginate and chitosan (10, 25, 50) in order to modify the diffusion barrier. The coated gel samples were analyzed by means of Attenuated Total Reflectance-Fourier Transform Infrared (ATR-FTIR) and confocal Raman spectroscopy, and it was found that the multilayer coatings onto polymer film were interpenetrated to some extent within the gelatin. The obtained results inferred that the coating of gelatin gels with polysaccharide multilayer film increased the thermal stability of gelatin gels and modulated the BSA release. Finally, the influence of a number of bilayers onto the drug release mechanism was determined. The Ritger-Peppas model was found to be the most accurate to describe the diffusion mechanism., This research was funded by ANPCyT (National Agency of Scientific and Technology Promotion) PICT 2016-1905 and UNMdP (National University of Mar del Plata) and the Spanish Ministry of Science, Innovation and Universities (MAT2017-83014-C2-1-P), We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Photoresponsive Nanometer-Scale Iron Alginate Hydrogels: A Study of Gel-Sol Transition Using a Quartz Crystal Microbalance

  • Criado-González, Miryam
  • Corbella, Laura
  • Senger, B.
  • Boulmedais, F.
  • Hernández, Rebeca
Alginate/Fe hydrogels were fabricated on hyaluronic acid (HA) and poly(allylamine hydrochloride) (PAH) multilayers to yield photoresponsive nanometer-scale hydrogels. Light irradiation of the resulting hydrogels induced the photoreduction of >hard> Fe to >soft> Fe cations, leading to changes in the mechanical properties of the hydrogels related to their cross-linking behavior. The buildup and the phototriggered response of the supported alginate hydrogels were followed in situ with a quartz crystal microbalance (QCM) using an open cell allowing light irradiation from an LED source on top of the hydrogel. The results were correlated to the release profiles of folic acid, employed herein as a drug model, obtained from light-irradiated supported iron alginate hydrogels., The authors thank Emilio Madrid for rheological measurements and Pilar Posadas for AFM measurements. Déborah Wagner is acknowledged for technical support. M.C.-G. acknowledges IDEX of Université de Strasbourg for granting a postdoctoral fellowship. Financial support from MINECO (MAT2017-83014-C2-1-P) is gratefully acknowledged., Peer reviewed, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

How Confinement Affects the Nucleation, Crystallization, and Dielectric Relaxation of Poly(butylene succinate) and Poly(butylene adipate) Infiltrated within Nanoporous Alumina Templates

  • Safari, M.
  • Maiz, J.
  • Shi, G.
  • Juanes, Diana
  • Liu, G.
  • Wang, D.
  • Mijangos, Carmen
  • Alegría, Ángel
  • Müller, A.J.
This work describes the successful melt infiltration of poly(butylene succinate) (PBS) and poly(butylene adipate) (PBA) within 70 nm diameter anodic aluminum oxide (AAO) templates. The infiltrated samples were characterized by SEM, Raman, and FTIR spectroscopy. The crystallization behaviors and crystalline structures of both polymers, bulk and confined, were analyzed by differential scanning calorimetry (DSC) and grazing incidence wide angle X-ray scattering (GIWAXS). DSC revealed that a change in the nucleation process occurred from heterogeneous nucleation for bulk samples to homogeneous nucleation for infiltrated PBA and to surface-induced nucleation for infiltrated PBS. GIWAXS results indicate that PBS nanofibers crystallize in the α-phase, as well as their bulk samples. However, PBA nanofibers crystallize just in the β-phase, whereas PBA bulk samples crystallize in a mixture of α- and β-phases. The crystal orientation within the pores was determined, and differences between PBS and PBA were also found. Finally, broadband dielectric spectroscopy was applied to study the segmental dynamics for bulk and infiltrated samples. The glass temperature was found to significantly decrease in the PBS case upon infiltration, while that of PBA remained unchanged. These differences were correlated with the higher affinity of PBS to the AAO walls than PBA, in accordance with their nucleation behavior (surface-induced versus homogeneous nucleation, respectively)., POLYMAT and ICTP-CSIC Institutions acknowledge financial support from the Spanish Ministry of Science, Innovation, and Universities (MAT2017-83014-C2-1-P and MAT2017- 83014-C2-2-P). M.S. gratefully acknowledges the award of a PhD fellowship by POLYMAT Basque Center for Macromolecular Design and Engineering. J.M. acknowledges support from the Provincial Council of Gipuzkoa under the program Fellow Gipuzkoa and “Fomento San Sebastián” in the framework program “Retorno del Talento Local” Donostia up! 2016. G.L, D.W., and A.J.M acknowledge the support from the National Natural Science Foundation of China (51820105005, 21873109) and National Key R&D Program of China (2017YFE0117800). G.L. acknowledges the support from the Youth Innovation Promotion Association of the Chinese Academy of Sciences (2015026). This work has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska- Curie grant agreement no. 778092. The UPV/EHU team gratefully acknowledges the financial contribution of the Basque Government through grants IT1309-19 and IT1175- 19.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Influence of chain primary structure and topology (Branching) on crystallization and thermal properties: the case of polysulfides

  • Pérez-Camargo, Ricardo A.
  • D'Arcy, Richard
  • Iturrospe, Amaia
  • Arbe, Arantxa
  • Tirelli, Nicola
  • Müller, Alejandro J.
We have investigated how variations in primary structure (distribution of monomeric units, chain length) and degree of branching affect the crystallization behavior of polysulfides. In particular, we have used copolymers of crystallizable (ethylene sulfide, ES) and non-crystallizable (propylene sulfide, PS) units, prepared via anionic ring-opening mechanism. PS units interrupt the crystallization of ES sequences; therefore, strong differences in thermal properties are expected between copolymers with a gradient (single addition of ES/PS mixtures) or a semirandom structure (sequential additions, which yield a more constant composition along the chain). Additionally, we prepared different chain topologies: linear, 4- and 8-armed stars, and combs with 10, 15, and 20 arms, in a comparison where each arm had a gradient primary structure and degree of polymerization (DP) of 10, 20, and 30. The influence of these variables (topology, number of arms, and DP) on the thermal properties was studied by polarized light optical microscopy (PLOM), standard and advanced DSC techniques (i.e., self-nucleation and successive self-nucleation and annealing (SSA)), and small and wide angle X-ray scattering (WAXS and SAXS). First, we have confirmed the much higher order obtained in gradient polymers, in comparison to the semirandom ones. Second, we have seen that the type of crowding of polymer chains affected the level of order achievable. In star polymers, an increasing number of arms increased topological restrictions, which in turn decreased crystallization and melting temperatures, crystallinity, and lamellar thickness. For combs, which are characterized by a more parallel than convergent crowding of the chains, the increase in arms number did not produce a significant decrease in crystalline order; on the contrary, the higher density of chains caused moderate increases in crystallization and melting temperatures, crystallinity, and lamellar thickness., The POLYMAT/UPV/EHU team would like to acknowledge funding from the following projects: UPV/EHU Infrastructure: INF 14/38; Mineco/FEDER: SINF 130I001726XV1/Ref: UNPV13-4E-1726; and Mineco MAT2017-83014-C2-1-P*. R.A.P.-C. gratefully acknowledges the award of a Ph.D. fellowship by POLYMAT Basque Center for Macromolecular Design and Engineering. A.A. and A.I. acknowledge financial support from IT-654-13 and MAT2015-63704-P (MINECO/ FEDER, UE). We gratefully acknowledge the ALBA synchrotron facility (Proposal Number: 2018022683) for the funding and help to perform experiments at BL11-NCDSWEET beamline with the collaboration of ALBA staff.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Organocatalyzed Polymerization of PET- mb-poly(oxyhexane) Copolymers and Their Self-Assembly into Double Crystalline Superstructures

  • Flores, I.
  • Basterretxea, A.
  • Etxeberria, Agustín
  • González, A.
  • Ocando, C.
  • Vega, Juan Francisco
  • Martínez-Salazar, Javier
  • Sardon, H.
  • Müller, A.J.
15 pags., 15 figs., 5 tabs., 2 schs., Double crystalline multiblock copolymers exhibit two well-defined melting temperatures associated with the two phases formed by their constituent blocks. The crystalline superstructure formed in these copolymers is complex and depends on the miscibility of both comonomers. In this work, an innovative series of double crystalline poly(ethylene terephthalate)-mb-poly(oxyhexane) multiblock copolymers were prepared in one pot. Previously synthesized low molecular weight poly(oxyhexane)telechelic diol and poly(ethylene terephthalate) (PET) oligomers were reacted by transesterification using an organic catalyst (1,8-diazabicyclo[5.4.0]undec-7-ene/benzoic acid), in a solvent-free process. The copolymerization was demonstrated by H NMR and C NMR spectroscopies, and the random distribution of poly(oxyhexane) chains was confirmed. We found that all compositions exhibited double crystallinity, but the crystallization of the copolymers was strongly affected by the PET/poly(oxyhexane) composition. When the PET content in the copolymer decreases, the crystallization and melting temperatures of the poly(oxyhexane) phase decrease as well as its crystallization rate. The poly(oxyhexane) content increases induce similar changes in the PET phase. PET and poly(oxyhexane) chain segments form a one-phase melt according to small-angle X-ray scattering (SAXS). When the material is cooled from the melt, the PET phase crystallizes first (at higher temperatures), forming superstructural (micrometer size spherulites) templates. Upon further cooling, the crystallization of poly(oxyhexane) lamellae occurs, within the interlamellar regions of PET spherulitic templates. Furthermore, during crystallization of the copolymer, the amorphous regions of both components undergo phase separation, as evidenced by the presence of two T's. Polarized light optical microscopy/atomic force microscopy studies were performed and demonstrated the presence of microspherulitic morphology in the whole composition range. Considering all results, including temperature-dependent synchrotron SAXS/wide-angle X-ray scattering, we demonstrate the ability of poly(oxyhexane) to crystallize upon cooling within the previously formed PET spherulitic templates. Hence, these copolymers form complex double crystalline spherulitic superstructures which contain two amorphous and two crystalline interlamellar phases., We acknowledge funding by the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement no. 778092. We also acknowledge funding by MINECO through project MAT2017-83014-C2-1-P. I.F. would like to acknowledge CONACYT (Mexico) for the Ph.D. grant awarded.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

PET- ran-PLA Partially Degradable Random Copolymers Prepared by Organocatalysis: Effect of Poly(l -lactic acid) Incorporation on Crystallization and Morphology

  • Flores, I.
  • Etxeberria, Agustín
  • Irusta, L.
  • Calafel, I.
  • Vega, Juan Francisco
  • Martínez-Salazar, Javier
  • Sardon, H.
  • Müller, A.J.
13 pags., 16 figs., 2 tabs., Polyethylene terephthalate (PET) is a nonbiodegradable polymer whose hydrolytic degradation can take decades. Intensive research has been performed to accelerate its hydrolytic degradation without significantly affecting its properties. In this work, PET was combined with poly(lactic acid) (PLA), a well-known biodegradable polymer, and the effect of PLA content in the crystallization of the PET component has been investigated in detail. To make the process sustainable, PET was polymerized using monomers that can be derived from PET chemical recycling (dimethyl terephthalate) and using organocatalysis (metal-free catalysts). First, low-molecular-weight telechelic PLA was prepared from the organocatalyzed ring-opening polymerization (ROP) of l-lactide followed by step-growth copolymerization with PET oligomers. The random copolymerization was confirmed by Fourier transform infrared (FTIR) and H NMR. We found that PET-ran-PLA copolymers are able to crystallize up to 24 mol % of PLA. Wide-angle and small-angle X-ray scattering (WAXS and SAXS) demonstrated that PLA units interrupt the average crystallizable PET sequences, decreasing its lamellar thickness, melting point, and crystallinity. The temperature dependence of the crystallization rate remarkably switches from nucleation control to diffusion control, as the mol % of PLA approaches the maximum tolerable limit for crystallization. The copolymers exhibited a microspherulitic PET morphology that changed to axialitic at relatively high contents of PLA. Preliminary hydrolytic degradation experiments demonstrate the potential degradation character of the prepared copolymers. If we consider the degradability of the copolymers obtained together with the green synthetic route employed (using dimethyl terephthalate, a monomer that can be obtained from the chemical route for recycling PET), the copolymers produced represent a step toward revalorization of PET recycled monomers for the production of sustainable materials., A.J.M. and H.S. acknowledge European funding by the RISE BIODEST project (H2020-MSCA-RISE-2017-778092). A.J.M. and I.F. acknowledge funding and beam time from ALBA Synchrotron facility through the project: 2017092338 (2018). I.F. acknowledges CONACYT (Mexico) for the Ph.D. grant awarded. A.J.M. acknowledges funding from MINECO, project: MAT2017-83014-C2-1-P.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Contraction of fibrin-derived matrices and its implications for in vitro human skin bioengineering

  • Montero, A.
  • Acosta, Sonia
  • Hernández, Rebeca
  • Elvira, Carlos
  • Jorcano, José Luis
  • Velasco, Diego
It is well-known that fibroblasts play a fundamental role in the contraction of collagen and fibrin hydrogels when used in the production of in vitro bilayered skin substitutes. However, little is known about the contribution of other factors, such as the hydrogel matrix itself, on this contraction. In this work, we studied the contraction of plasma-derived fibrin hydrogels at different temperatures (4, 23, and 37°C) in an isotonic buffer (phosphate-buffered saline). These types of hydrogels presented a contraction of approximately 30% during the first 24 hr, following a similar kinetics irrespectively of the temperature. This kinetics continued in a slowed down manner to reach a plateau value of 40% contraction after 10–15 days. Contraction of commercial fibrinogen hydrogels was studied under similar conditions and the kinetics was completed after 8 hr, reaching values between 20 and 70% depending on the temperature. We attribute these substantial differences to a modulatory effect on the contraction due to plasma proteins which are initially embedded in, and progressively released from, the plasma-based hydrogels. The elastic modulus of hydrogels measured at a constant frequency decreased with increasing temperature in 7-day gels. Rheological measurements showed the absence of a strain-hardening behavior in the plasma-derived fibrin hydrogels. Finally, plasma-derived fibrin hydrogels with and without human primary fibroblast and keratinocytes were prepared in transwell inserts and their height measured over time. Both cellular and acellular gels showed a height reduction of 30% during the first 24 hr likely due to the above-mentioned intrinsic fibrin matrix contraction., Cátedra Fundación Ramón Areces; Programa de Actividades de I + D Entre Grupos de Investigación de la Comunidad de Madrid, Grant/Award Number: S2018/BAA-4480; Programa Estatal de I + D + i Orientada a los Retos de la Sociedad, Grant/Award Numbers: MAT2013-42957-R, RTI2018-101627-B-I00; Proyectos de I + D Correspondientes al Programa Estatal de Fomento de la Investigación Científica y Ténica de Excelencia, Grant/Award Number: MAT2017-83014-C2-1-P
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

4-Miktoarm star architecture induces PVDF β-phase formation in (PVDF)2-b-(PEO)2 miktoarm star copolymers

  • María, Nicolás
  • Maiz, Jon
  • Rodionov, Valentin
  • Hadjichristidis, Nikos
  • Müller, Alejandro J.
Novel (PVDF)2-b-(PEO)2 4-miktoarm star copolymers (PVDF: polyvinylidene fluoride, PEO: polyethylene oxide) with three different compositions, but the same overall molecular weight, were synthesized by combining iodine transfer and anionic polymerizations with “click” chemistry. We have studied the polymorphic character of the PVDF arm crystals in the 4-miktoarm star copolymers in comparison with one of their 2-arm star (linear) precursors ((PVDF29-N3)2), when the samples are cooled from the melt at different cooling rates. The phase behaviour was investigated by small angle X-ray scattering (SAXS) and polarized light optical microscopy (PLOM). The results indicate that the materials are either weakly segregated in the melt or melt-mixed. They form PVDF spherulites at high crystallization temperatures when the PEO component is molten. The relative contributions of the α and β-phase were determined by in situ wide angle X-ray scattering (WAXS), differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy. All samples exhibit a mixture of α and β-phase crystals when cooled from the melt at 20 °C min−1. However, the amount of β-phase is much larger in the 4-miktoarm star copolymer samples than in the (PVDF29-N3)2 linear precursor. Therefore, the 4-miktoarm star chain topology was found to induce β-phase formation. As the samples are cooled at slower rates, the amount of PVDF β-phase crystals increased. For samples crystallized at 1 °C min−1, the PVDF arms of all the synthesized (PVDF)2-b-(PEO)2 miktoarm star copolymers form exclusively the ferroelectric/piezoelectric β-phase crystals. Therefore, these materials have potential applications in the field of energy harvesting., N. M. thankfully acknowledges his PhD fellowship from the POLYMAT Basque Center for Macromolecular Design and Engineering. J. M. acknowledges partial financial support from the IBERDROLA Foundation. We acknowledge funding from MINECO MAT2017-83014-C2-1-P project and from the Basque Government through grant IT1309-19., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of nanoconfinement on the isodimorphic crystallization of poly(butylene succinate-ran-caprolactone) random copolymers

  • Safari, Maryam
  • León-Boigues, Laia
  • Shi, Guangyu
  • Maiz, Jon
  • Liu, Guoming
  • Wang, Dujin
  • Mijangos, Carmen
  • Müller, Alejandro J.
In this paper, we study for the first time the effect of hard confinement on the isodimorphic crystallization of random copolyesters. A series of poly(butylene succinate-ran-caprolactone) samples encompassing the entire composition range were successfully infiltrated into nanoporous alumina templates (anodic aluminum oxide (AAO)) with a fixed diameter of 100 nm. The samples were characterized using scanning electron microscopy (SEM), Raman spectroscopy, Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and grazing-incidence wide-angle X-ray scattering (GIWAXS). FTIR proved that poly(butylene succinate) (PBS)-rich nanofibers showed interactions between the copolyester chains and the walls of the AAO templates; however, the poly(ε-caprolactone) (PCL)-rich nanofibers did not show any interaction with the AAO walls. All infiltrated samples experienced a very large decrease in crystallization temperature, as expected, since the level of confinement is large enough to suppress heterogeneous nucleation. In spite of this, all copolymers were able to crystallize, regardless of composition. Additionally, when Tc or Tm is plotted versus copolymer composition, a clear pseudoeutectic point is observed. These results indicate that the isodimorphic behavior of the copolyesters is maintained under hard confinement. Infiltrated PCL undergoes homogeneous nucleation (inside the nanopore volume) as expected by the lack of interaction with the AAO walls. On the other hand, PBS exhibited a surface nucleation mechanism triggered by the interactions with the AAO walls. In the case of random copolymers, all PCL-rich copolymers nucleated homogeneously. However, in the case of PBS-rich copolymers, the nucleation gradually changed from surface-induced nucleation for neat PBS to homogeneous nucleation as the PCL concentration in the copolymers increased and the interactions of PBS chains with the AAO walls are diluted. The confinement under 100 nm nanopores did not change the orientation of the PBS or PCL phase crystals, which kept their chain direction perpendicular to the pore axis, as demonstrated by GIWAXS., The authors acknowledge the support of the National Key R&D Program of China (2017YFE0117800) and the National Natural Science Foundation of China (21873109, 51820105005). The authors would also like to acknowledge financial support provided by the BIODEST project; this project has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement no. 778092. The UPV/EHU and ICTP-CSIC Institutions acknowledge financial support from the Spanish Ministry of Science, Innovation, and Universities (MAT2017-83014-C2-2-P and MAT2017-83014-C2-1-P). M.S. thankfully acknowledges her Ph.D. fellowship by POLYMAT Basque Center for Macromolecular Design and Engineering. The authors would like to thank Dr. Antxon Martinez de Ilarduya and Prof. Sebastian Muñoz for their help in the synthesis of copolyesters at UPC, Spain. J.M. gratefully acknowledges support from the Provincial Council of Gipuzkoa under the program Fellow Gipuzkoa and “Fomento San Sebastián” in the framework program “Retorno del Talento Local” Donostia up! 2016., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nanostructural organization of thin films prepared by sequential dip-coating deposition of poly(butylene succinate), poly(ε-caprolactone) and their copolyesters (PBS-ran-PCL)

  • Peñas, Mario I.
  • Ocando, C.
  • Penott-Chang, E.
  • Safari, Maryam
  • Ezquerra, Tiberio A.
  • Rebollar, Esther
  • Nogales, Aurora
  • Hernández, Rebeca
  • Müller, A.J.
10 pags., 7 figs., 2 tabs., In this work, we prepare and characterize multiphasic thin films containing poly(ε-caprolactone), PCL, poly(butylene succinate), PBS, and a poly (butylene succinate-ran-ϵ-caprolactone) (PBS-ran-PCL) random copolyester. To that aim, thin films were prepared by sequential dipping of a silicon substrate into chloroform solutions of the respective polymers. The preparation method resulted in films with varying compositions of PCL and PBS components depending on the initial concentration of the dipping solutions and the number of dipping steps employed for the preparation of the samples. Atomic force microscopy (AFM), grazing incidence X-ray scattering at wide angle (GIWAXS) and scattering-type scanning near-field optical microscopy (s-SNOM) and Fourier transform infrared nanospectroscopy (nano-FTIR) were employed to characterize the films obtained. As chloroform can dissolve all components, the final composition of the film was always rich in the last deposited layer component. The thin films obtained were semicrystalline with a complex axialitic or dendritic morphology of the dominant component (that one deposited last) with traces of the other components, whose presence and location was revealed by s-SNOM/nano-FTIR., This study was supported by Spanish Ministry of Science, Innovation and Universities (MAT2017- 83014-C2-1-P, MAT2017-83014-C2-2-P, PID2019-107514 GB-I00/AEI/ 10.13039/501100011033 and PID2019-106125 GB-I00/AEI/ 10.13039/501100011033). We also acknowledge funding by Basque Government through grant IT1309-19. The authors acknowledge beamtime access at ALBA BL11 via proposal 2018072905 and the assistance of JC Martinez during the measurements. We would also like to thank the financial support provided by the BIODEST project; this project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 778092. CO wants to acknowledge “Diputaci on Foral de Gipuzkoa” in the framework program “Fellows Gipuzkoa de Atracci ́on y Retenci ́on de Talento”. RH is member of the Interdisci-plinary Platform for Sustainable Plastics towards a Circular Economy (SusPlast) from the Spanish National Research Council (CSIC).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Sequential Crystallization and Multicrystalline Morphology in PE- b-PEO- b-PCL- b-PLLA Tetrablock Quarterpolymers

  • Matxinandiarena, Eider
  • Múgica, A.
  • Tercjak, A.
  • Ladelta, V.
  • Zapsas, G.
  • Hadjichristidis, Nikos
  • Cavallo, D.
  • Flores, Araceli
  • Müller, A.J.
We investigate for the first time the morphology and crystallization of two novel tetrablock quarterpolymers of polyethylene (PE), poly(ethylene oxide) (PEO), poly(ϵ-caprolactone) (PCL), and poly(l-lactide) (PLLA) with four potentially crystallizable blocks: PE187.1-b-PEO3715.1-b-PCL2610.4-b-PLLA197.6 (Q1) and PE299.5-b-PEO268.8-b-PCL237.6-b-PLLA227.3 (Q2) (superscripts give number average molecular weights in kg/mol, and subscripts give the composition in wt %). Their synthesis was performed by a combination of polyhomologation (C1 polymerization) and ring-opening polymerization techniques using a ″catalyst-switch″ strategy, either ″organocatalyst/metal catalyst switch″ (Q1 sample, 96% isotactic tetrads) or ″organocatalyst/organocatalyst switch″ (Q2 sample, 84% isotactic tetrads). Their corresponding precursors - triblock terpolymers PE-b-PEO-b-PCL, diblock copolymers PE-b-PEO, and PE homopolymers - were also studied. Cooling and heating rates from the melt at 20 °C/min were employed for most experiments: differential scanning calorimetry (DSC), polarized light optical microscopy (PLOM), in situ small-angle X-ray scattering/wide-angle X-ray scattering (SAXS/WAXS), and atomic force microscopy (AFM). The direct comparison of the results obtained with these different techniques allows the precise identification of the crystallization sequence of the blocks upon cooling from the melt. SAXS indicated that Q1 is melt miscible, while Q2 is weakly segregated in the melt but breaks out during crystallization. According to WAXS and DSC results, the blocks follow a sequence as they crystallize: PLLA first, then PE, then PCL, and finally PEO in the case of the Q1 quarterpolymer; in Q2, the PLLA block is not able to crystallize due to its low isotacticity. Although the temperatures at which the PEO and PCL blocks and the PE and PLLA blocks crystallize overlap, the analysis of the intensity changes measured by WAXS and PLOM experiments allows identifying each of the crystallization processes. The quarterpolymer Q1 remarkably self-assembles during crystallization into tetracrystalline banded spherulites, where four types of different lamellae coexist. Nanostructural features arising upon sequential crystallization are found to have a relevant impact on the mechanical properties. Nanoindentation measurements show that storage modulus and hardness of the Q1 quarterpolymer significantly deviate from those of the stiff PE and PLLA blocks, approaching typical values of compliant PEO and PCL. Results are mainly attributed to the low crystallinity of the PE and PLLA blocks. Moreover, the Q2 copolymer exhibits inferior mechanical properties than Q1, and this can be related to the PE block within Q1 that has thinner crystal lamellae according to its much lower melting point., This work has received funding from MINECO through projects MAT2017-83014-C2-1-P and MAT2017-88382-P, from the Basque Government through grant IT1309-19, and from the ALBA synchrotron facility through granted proposal u2020084441 (March 2020). We would like to thank the financial support provided by the BIODEST project; this project has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement no. 778092.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Phase transitions in poly(vinylidene fluoride)/polymethylene-based diblock copolymers and blends

  • María, Nicolás
  • Maiz, Jon
  • Martínez-Tong, Daniel E.
  • Alegría, Ángel
  • Algarni, Fatimah
  • Zapzas, George
  • Hadjichristidis, Nikos
  • Müller, Alejandro J.
This article belongs to the Special Issue Block Copolymers with Crystallizable Blocks: Synthesis, Self-Assembly and Applications., The crystallization and morphology of two linear diblock copolymers based on polymethylene (PM) and poly(vinylidene fluoride) (PVDF) with compositions PM23-b-PVDF77 and PM38-b-PVDF62 (where the subscripts indicate the relative compositions in wt%) were compared with blends of neat components with identical compositions. The samples were studied by SAXS (Small Angle X-ray Scattering), WAXS (Wide Angle X-ray Scattering), PLOM (Polarized Light Optical Microscopy), TEM (Transmission Electron Microscopy), DSC (Differential Scanning Calorimetry), BDS (broadband dielectric spectroscopy), and FTIR (Fourier Transform Infrared Spectroscopy). The results showed that the blends are immiscible, while the diblock copolymers are miscible in the melt state (or very weakly segregated). The PVDF component crystallization was studied in detail. It was found that the polymorphic structure of PVDF was a strong function of its environment. The number of polymorphs and their amount depended on whether it was on its own as a homopolymer, as a block component in the diblock copolymers or as an immiscible phase in the blends. The cooling rate in non-isothermal crystallization or the crystallization temperature in isothermal tests also induced different polymorphic compositions in the PVDF crystals. As a result, we were able to produce samples with exclusive ferroelectric phases at specific preparation conditions, while others with mixtures of paraelectric and ferroelectric phases., Technical and human support by SGIker (UPV/EHU) is gratefully acknowledged for the TEM images acquired. We would also like to acknowledge funding from MINECO through grant MAT2017-83014-C2-1-P and from the Basque Government through grant IT1309-19. This research was funded by ALBA synchrotron facility through granted proposal 2020084441., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A Review on Current Strategies for the Modulation of Thermomechanical, Barrier, and Biodegradation Properties of Poly (Butylene Succinate) (PBS) and Its Random Copolymers

  • Peñas, Mario I.
  • Pérez-Camargo, Ricardo A.
  • Hernández, Rebeca
  • Müller, Alejandro J.
The impact of plastics on the environment can be mitigated by employing biobased and/or biodegradable materials (i.e., bioplastics) instead of the traditional “commodities”. In this context, poly (butylene succinate) (PBS) emerges as one of the most promising alternatives due to its good mechanical, thermal, and barrier properties, making it suitable for use in a wide range of applications. Still, the PBS has some drawbacks, such as its high crystallinity, which must be overcome to position it as a real and viable alternative to “commodities”. This contribution covers the actual state-of-the-art of the PBS through different sections. The first section reviews the different synthesis routes, providing a complete picture regarding the obtained molecular weights and the greener alternatives. Afterward, we examine how different strategies such as random copolymerization and the incorporation of fillers can effectively modulate PBS properties to satisfy the needs for different applications. The impact of these strategies is evaluated in the crystallization behavior, crystallinity, mechanical and barrier properties, and biodegradation. The biodegradation is carefully analyzed, highlighting the wide variety of methodologies existing in the literature to measure PBS degradation through different routes (hydrolytic, enzymatic, and soil)., This research was funded by Spanish Ministry of Science, Innovation and Universities (MAT2017-83014-C2-1-P, MAT2017-83014-C2-2-P). We would also like to acknowledge the financial support from the BIODEST project; this project has received funding from the European Union’s Hori- zon 2020 Research and Innovation Programme under the Marie Skłodowska-Curie grant agreement No. 778092. R.A.P.-C. is supported by the China Postdoctoral Science Foundation (2020M670462) and the National Natural Science Foundation of China (NSFC) (51820105005, 52050410327). M.I.P. is supported with an FPI contract (PRE2018-086104) to develop a PhD thesis. R.H. is member of the CSIC Interdisciplinary Thematic Platform (PTI+) Interdisciplinary Platform for Sustainable Plastics towards a Circular Economy+. (PTI-SusPlast+).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

PVDF arms crystallization in (PVDF)2-b-(PEO)2 miktoarm star block copolymers

  • María, Nicolás
  • Maiz, Jon
  • Hadjichristidis, Nikos
  • Müller, Alejandro J.
Trabajo presentado al GEP-SLAP (XVI Reunión del Grupo Especializado de Polímeros GEP de la Real Sociedad Española de Química (RSEQ) y de la Real Sociedad Española de Física (RSEF) - XVII Simposio Latinoamericano de Polímeros), celebrado en San Sebastián (España) del 8 al 12 de mayo de 2022., The authors thank ALBA Synchrotron Light facility for supporting the X-rays experiments at beamline BL11-NCD-SWEET and the funding by ALBA project 2018082953 (2019) and by Mineco MAT2017-83014-C2-1-P. N. M. gratefully acknowledges the financial support from POLYMAT Basque Center for Macromolecular Design and Engineering. J. M. acknowledges support from the Provincial Council of Gipuzkoa under the program Fellow Gipuzkoa and Ayudas a la Investigación 2018, from Fundación IBERDROLA., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tunable enzymatic biodegradation of poly(butylene succinate): biobased coatings and self-degradable films

  • Peñas, Mario I.
  • Criado-González, Miryam
  • Martínez de Ilarduya, Antxon
  • Flores, Araceli
  • Raquez, Jean-Marie
  • Mincheva, Rosica
  • Müller, Alejandro J.
  • Hernández, Rebeca
Biodegradation of polyesters driven by enzymes is considered as one of the most effective way of degradation of these materials, as a way to control plastics accumulation in the environment. In this study, we present two different strategies to tune the enzymatic degradation of PBS films triggered by a lipase from Pseudomonas cepacia. Firstly, the kinetics of enzymatic degradation of PBS films was regulated by applying multilayer coats of polysaccharide alginate and chitosan (Alg/Chi) films. Secondly, self-degradable PBS films were prepared by embedding lipase-filled alginate particles. For comparison purposes, a detailed enzymatic degradation study of neat PBS films exposed to a lipase from P. cepacia in solution was made to determine the main experimental parameters influencing their degradation in solution. The results showed that an increase in enzyme concentration increased the degradation extent and rate of neat PBS films. At a fixed enzyme concentration, stirring of the solution containing the enzyme and the PBS also increased the biodegradation rate. In the case of the PBS films coated with a different number of Alg/Chi layers by spray-assisted LbL and subjected to enzymatic degradation experiments in solution, the extent of degradation was found to be dependent on the number of protective coating layers. Therefore, the Alg/Chi biobased coating constitutes an effective barrier to the diffusion of the lipase, thus proving its effectiveness in modulating the enzymatic activity as a function of coating thickness. In the case of self-degradable PBS containing lipase-embedded alginate beads (employed to protect the enzyme during high-temperature processing), only limited biodegradation was observed as the amount of encapsulated enzyme employed was too small. Nonetheless, these results are promising, as the enzymatic activity –indicative of the degradation capacity of the enzyme– determined for all these samples was about 2 orders of magnitude lower than that of previous assays., This research was funded by the projects MAT2017-83014-C2-1-P, MAT2017-83014-C2-2-P, PID2020-113045GB-C21 and PID2020-113045GB-C22 funded by MCIN/ AEI /10.13039/501100011033 and by the Basque Government through grant IT1503-22. We would also like to acknowledge the financial support from the BIODEST project; this project has received funding from the European Union’s Horizon 2020 Research and Innovation Programme under the Marie Skłodowska-Curie grant agreement No. 778092. M.I.P. is supported with an FPI contract (PRE2018-086104) to develop a PhD thesis. R.H. is member of the CSIC Interdisciplinary Thematic Platform (PTI+) Interdisciplinary Platform for Sustainable Plastics towards a Circular Economy+ (PTI-SusPlast+). J.M.R. is a FRS-FNRS Senior Research Associate. Authors would also like to thank Dr. Ana Beloqui for helpful discussions on enzymatic activity., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enzymatic Degradation Behavior of Self-Degradable Lipase-Embedded Aliphatic and Aromatic Polyesters and Their Blends

  • Peñas, Mario I.
  • Beloqui, A.
  • Martínez de Ilarduya, A.
  • Suttiruengwong, S.
  • Hernández, Rebeca
  • Müller, A. J.
Over the past decade, the preparation of novel materials by enzyme-embedding into biopolyesters has been proposed as a straightforward method to produce self-degrading polymers. This paper reports the preparation and enzymatic degradation of extruded self-degradable films of three different biopolyesters: poly(lactic acid) (PLA), poly(butylene adipate-co-terephthalate) (PBAT), and poly(butylene succinate) (PBS), as well as three binary/ternary blends. Candida antarctica lipase B (CalB) has been employed for the enzyme-embedding procedure, and to the best of our knowledge, the use of this approach in biopolyester blends has not been reported before. The three homopolymers exhibited differentiated degradation and suggested a preferential attack of CalB on PBS films over PBAT and PLA. Moreover, the self-degradable films obtained from the blends showed slow degradation, probably due to the higher content in PLA and PBAT. These observations pave the way for exploring enzymes capable of degrading all blend components or an enzymatic mixture for blend degradation., This research was funded by the projects MAT2017-83014- C2-1-P, MAT2017-83014-C2-2-P, PID2020-113045GB-C21, and PID2020-113045GB-C22 funded by MCIN/AEI/ 10.13039/501100011033 and by the Basque Government through grant IT1503-22. We would also like to acknowledge the financial support from the BIODEST project; this project has received funding from the European Union’s Horizon 2020 Research and Innovation Programme under the Marie Skłodowska-Curie grant agreement no. 778092. M.I.P. is supported with an FPI contract (PRE2018-086104) to develop a PhD thesis. A.B. gratefully acknowledges the financial support from the Spanish Research Agency (AEI) for the financial support (RYC2018-025923-I from RyC program - MCIN/AEI/10.13039/501100011033 and FSE “invierte en tu futuro”). R.H. is member of the CSIC Interdisciplinary Thematic Platform (PTI+) Interdisciplinary Platform for Sustainable Plastics towards a Circular Economy+ (PTI- SusPlast+). We also acknowledge the Department of Materials Science and Engineering, Silpakorn University for sample fabrications.