Skip to main content

ENSAMBLADO DE POLIMEROS BIODEGRADABLES DESDE LA MACRO A LA NANOESCALA. PROCESABILIDAD-ESTRUCTURA/PROPIEDADES-APLICACIONES

MAT2017-83014-C2-2-P

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D (Excelencia / Generación de Conocimiento)
Call year 2017
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 20
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Envases activos basados en el anclaje covalente reversible de compuestos antimicrobianos en quitosano

  • Heras Mozos, Raquel
[ES] La presente Tesis Doctoral plantea el desarrollo de sistemas antimicrobianos basados en el anclaje covalente reversible de aldehídos de origen natural con actividad antimicrobiana en películas de quitosano para su aplicación en el envasado de alimentos. En primer lugar, se desarrolló un protocolo para la formación de bases de Schiff o iminas de diferentes aldehídos en películas de quitosano. Estas iminas son producto de la condensación de los grupos amino primarios del quitosano con los grupos carbonilo del aldehído. El anclaje de dichos aldehídos, en su mayoría de elevada volatilidad, permite su estabilización a largo plazo en estructuras poliméricas, facilitando su manejo. Las iminas son hidrolizables, y dicha hidrólisis está favorecida a pH < 5, por lo que la naturaleza reversible del enlace ofrece un mecanismo para controlar la liberación del antimicrobiano. Previamente a su anclaje, se evaluó la capacidad antimicrobiana de los aldehídos frente a diversos microorganismos patógenos y alterantes alimentarios. Se caracterizó el enlace imina mediante técnicas espectroscópicas y se cuantificó la incorporación del aldehído a la película de quitosano mediante análisis elemental. Adicionalmente otras propiedades funcionales del material fueron evaluadas, como propiedades térmicas, ópticas o de absorción de agua. En segundo lugar, se evaluó la reversibilidad del enlace imina o base de Schiff por el contacto con soluciones acuosas de diferente acidez. La respuesta al pH de las películas permitió determinar la mayor estabilidad del enlace imina a pH neutros, mientras que a pH ácidos resultó más hidrolizable, permitiendo así una mayor liberación del aldehído anclado. Las películas activas desarrolladas mostraron una buena respuesta antimicrobiana contra Botrytis cinerea y Penicillium expansum, al someterlas a una solución de pH ácido. La respuesta antimicrobiana de las películas se debió exclusivamente a la liberación del aldehído al espacio de cabeza tras la hidrólisis de la imina. La estructura química de los aldehídos tuvo un impacto significativo en la formación de iminas y en las propiedades de la película, así como en su reversibilidad. Así, la presencia del doble enlace (Ca=Cß) en aldehídos a,ß-insaturados podría generar otro tipo de enlaces como la adición de Michael, permitiendo obtener matrices entrecruzadas y más estables que sus análogos saturados. El grado de entrecruzamiento y propiedades de estas películas puede ser modulado por el pH del medio empleado en su síntesis. Para la aplicación tecnológica de las películas antimicrobianas de quitosano con los volátiles anclados reversiblemente, se trabajó con productos de postcosecha frescos o mínimamente procesados. Se empleó la respuesta al pH de las películas siguiendo diferentes estrategias. Por una parte, el sistema se incorporó en el envasado de moras frescas, para ello, se diseñó un envase de doble fondo dónde depositar las películas junto con el medio activador. Se redujo satisfactoriamente el crecimiento de hongos sobre la superficie de la fruta, aumentando el tiempo de vida útil de las moras envasadas de 3 a 12 días. Por otra parte, se envasó piña fresca cortada empleando el mismo diseño del envase, de forma que el jugo ácido exudado por la piña durante su almacenamiento catalizó la hidrólisis de la imina. Las películas activas mejoraron la calidad y redujeron la carga microbiana habitual de la piña, observando una reducción notable respecto al control a partir del día 9. Por último, la actividad antimicrobiana de las películas activas se evaluó en un alimento líquido refrigerado inoculado con E. coli. La acidez del zumo provocó la liberación del aldehído al medio inhibiendo el crecimiento del patógeno. Las películas de quitosano con los aldehídos anclados presentaron respuesta al pH, mostrando una mayor capacidad antimicrobiana al ser sometidas a pH ácido, y pudiendo emplearse en el diseño de envases activos antimicrobianos., [CA] Aquesta Tesi Doctoral planteja el desenvolupament de sistemes antimicrobians basats en l'ancoratge covalent reversible d'aldehids d'origen natural amb activitat antimicrobiana en pel·lícules de quitosà per aplicar-les a l'envasament d'aliments. En primer lloc, es va desenvolupar un protocol per a la formació de bases de Schiff o imines de diferents aldehids en pel·lícules de quitosà. Aquestes imines són el producte de la addició nucleòfila dels grups amino del quitosà al carbonil de l'aldehid que s'ancorarà. L'ancoratge d'aquests aldehids, majoritàriament d'elevada volatilitat, permet la seva estabilització a llarg termini en estructures polimèriques, facilitant-ne el seu maneig. Les imines són hidrolitzables, i aquesta hidròlisi està afavorida a pH < 5, per la qual cosa la naturalesa reversible de l'enllaç ofereix un mecanisme per controlar l'alliberament de l'antimicrobià. Prèviament a la incorporació d'aquests compostos a les pel·lícules de quitosà, es va avaluar la capacitat antimicrobiana dels aldehids davant de diversos microorganismes patògens i alterants d'aliments. Es va caracteritzar l'enllaç imina mitjançant tècniques espectroscòpiques i es va quantificar la incorporació de l'aldehid a la pel·lícula de quitosà mitjançant anàlisi elemental. Addicionalment, altres propietats funcionals del material van ser avaluades, com a propietats tèrmiques, òptiques o d'absorció d'aigua, verificant la modificació del polímer. En segon lloc, es va avaluar la reversibilitat de l'enllaç imina o base de Schiff pel contacte amb solucions aquoses de diferent acidesa. La resposta al pH de les pel·lícules va permetre determinar la major estabilitat de l'enllaç imina a pH neutres, mentre que a pH àcids va resultar més hidrolitzable, permetent així un alliberament més gran de l'aldehid ancorat. Les pel·lícules actives desenvolupades van mostrar una bona resposta antimicrobiana contra Botrytis cinerea i Penicillium expansum,la qual és deguda exclusivament a l'alliberament de l'aldehid a l'espai de cap després de la hidròlisi de la imina. L'estructura química dels aldehids va tenir un impacte significatiu en la formació d'imines i en les propietats de la pel·lícula, així com en la reversibilitat. Així, la presència del doble enllaç (Ca=Cß) en aldehids a,ß-insaturats podria generar un altre tipus d'enllaços com l'addició de Michael, permetent obtenir matrius entrecreuades i més estables que els seus anàlegs saturats, el qual pot ser modulat pel pH del medi emprat a la síntesi. Per a l'aplicació tecnològica de les pel·lícules antimicrobianes de quitosà amb els volàtils ancorats reversiblement, es va treballar amb productes de postcollita frescos o mínimament processats. Es va emprar la resposta al pH de les pel·lícules seguint diferents estratègies. D'una banda, el sistema es va incorporar a l'envasat de móres fresques, per això es va dissenyar un envàs de doble fons on dipositar les pel·lícules juntament amb el medi activador a pH àcid. Es va reduir satisfactòriament el creixement de fongs sobre la superfície de la fruita, augmentant el temps de vida útil de les móres envasades de 3 a 12 dies. D'altra banda, es va envasar pinya fresca tallada emprant el mateix disseny de l'envàs, de manera que el suc àcid exsudat per la pinya durant el seu emmagatzematge va afavorir la hidròlisi de la imina. Les pel·lícules actives van millorar la qualitat i van reduir la càrrega microbiana habitual de la pinya, observant una reducció notable a partir del dia 9. Per acabar, l'activitat antimicrobiana de les pel·lícules actives es va avaluar en un aliment líquid refrigerat i inoculat amb E. coli. L'acidesa del suc va provocar l'alliberament de l'aldehid al medi inhibint el creixement del patogen. Les pel·lícules de quitosà amb els aldehids ancorats van presentar resposta al pH, mostrant una major capacitat antimicrobiana en ser sotmeses a pH àcid, i podent emprar-se en el disseny d'envasos actius antimicrobians., [EN] This Doctoral Thesis proposes the development of antimicrobial systems based on the reversible covalent anchoring of naturally occurring aldehydes with antimicrobial activity in chitosan films for their application in food packaging. First, a protocol for the formation of Schiff bases or imines of different aldehydes on chitosan films was developed. These imines are the product of the condensation of the primary amino groups of chitosan with the carbonyl groups of the aldehyde. The immobilization of these aldehydes, most of which are highly volatile, allows their long-term stabilisation in polymeric structures, facilitating their handling. The imines are hydrolysable, and its hydrolysis is favoured at pH < 5, so the reversible nature of the bond provides a mechanism to control the antimicrobial release. Prior to the incorporation of these compounds into chitosan films, the antimicrobial capacity of aldehydes was evaluated against various pathogenic and food spoilage microorganisms. The formed imine bond was characterised by spectroscopic techniques and the incorporation of the aldehyde into the chitosan film was quantified by elemental analysis. Additionally, other functional properties were evaluated, such as thermal, optical and water absorption properties, verifying the modification of the polymer. Secondly, the reversibility of the imine bond or Schiff's base was evaluated by contact with aqueous solutions of different acidity. The pH response of the films allowed determining the higher stability of the imine bond at neutral pH, while at acidic pH it was more hydrolysable, leading a higher release of the anchored aldehyde The developed active films showed a good antimicrobial response against Botrytis cinerea and Penicillium expansum, especially when subjected to an acidic pH solution. The antimicrobial response of the films was exclusively due to the aldehyde released into the headspace after imine hydrolysis. The chemical structure of the aldehydes had a significant impact on imine formation and film properties, as well as on their reversibility. Thus, the presence of the double bond (Ca=Cß) in a,ß-unsaturated aldehydes could generate other types of bonds such as Michael addition, allowing cross-linked polymer, which are more stable than their saturated analogues. The degree of cross-linking and properties of these films can be modulated by the pH of the medium used in their synthesis. For the technological application of chitosan antimicrobial films with reversibly grafted volatiles, fresh or minimally processed post-harvest products were used. The pH response of the films was used following different strategies. On the one hand, the system was incorporated in the packaging of fresh blackberries, for this purpose, a double-bottom package was designed to deposit the films together with the activating medium at acid pH. The solution was added at the time of fruit packaging and allowed the imine bond to be hydrolysed subsequently the aldehyde release into the headspace where it exerted its function. Fungal growth on the fruit surface was successfully reduced, increasing the shelf life of the packed blackberries from 3 to 12 days. Moreover, fresh cut pineapple was packaged using the same packaging design, so that the exuded juice by the pineapple during storage favoured the imine hydrolysis. The active films improved the quality and reduced the usual microbial load of the pineapple, with a noticeable reduction compared to the control from day 9 onwards. Finally, the antimicrobial activity of the active films was evaluated in a refrigerated liquid food inoculated with E. coli. The acidity of the juice resulted in the release of aldehyde into the medium inhibiting the growth of the pathogen. The aldehyde immobilization in chitosan films were pH-responsive, showing a higher antimicrobial capacity when subjected to acidic pH, which can be used in the design of antimicrobial active packaging., The authors acknowledge the financial support of the Spanish Ministry of Science and Innovation (Grants RTI2018-093452-B- I00, MAT2017-83014-C2-2P and BES-2016-077380 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Gecko-like branched polymeric nanostructures from nanoporous templates

  • Blaszczyk-Lezak, Iwona
  • Juanes, Diana
  • Martín, Jaime
  • Mijangos, Carmen
Here, we report a simple method to produce hierarchically shaped polymeric one-dimensional nanostructures. More specifically, dual-sized polymer nanowires are fabricated employing multibranched anodic aluminum oxide templates. By fine selection of the anodization conditions, we achieve branched nanopores having a first segment of 400 nm in diameter from which seven further 55 nm in diameter pores arise. Wetting of such nanopores with polymer melts - for example, poly(μ-caprolactone) and polystyrene - allows for the nanomolding of their respective inverse nanostructures, that is, dual-sized multibranched polymer nanowires that, when supported on a flat surface, strongly resemble the spatulae of geckos' toes. The structural features of the dual-sized polymer nanostructures, namely, crystalline phase, crystallinity, texture, and so on, are furthermore characterized and interpreted within the context of polymer phase transitions in confined media. Our work presents a readily applicable approach to produce soft nanomaterials of high morphological complexity, thereby with promising implications in the nanotechnology area, for example, in biomimetic solid adhesion., Financial support from the Spanish Ministerio de Ciencia, Innovación e Universidades under projects MAT2014-53437- C2 and MAT2017-83014-C2-2-P is acknowledged. J.M. thanks MEC for the Ramón y Cajal contract and Fundación Iberdrola (Ayudas a la Investigación en Energía y Medio Ambiente 2017) for the financial support., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A Patterned Butyl Methacrylate-co-2-Hydroxyethyl Acrylate Copolymer with Softening Surface and Swelling Capacity

  • León-Boigues, Laia
  • Bilderling, Catalina von
  • Pietrasanta, Lía I.
  • Azzaroni, O.
  • Giussi, Juan M.
  • Mijangos, Carmen
The tunable swelling and mechanical properties of nanostructures polymers are crucial parameters for the creation of adaptive devices to be used in diverse fields, such as drug delivery, nanomedicine, and tissue engineering. We present the use of anodic aluminum oxide templates as a nanoreactor to copolymerize butyl methacrylate and 2-hydroxyethyl acrylate under radical conditions. The copolymer obtained under confinement showed significant differences with respect to the same copolymer obtained in bulk conditions. Molecular weights, molecular weight dispersities, Young’s modulus, and wetting behaviors were significantly modified. The combination of selected monomers allowed us to obtain nanopillar structures with an interesting softening surface and extraordinary swelling capacity that could be of special interest to surface science and specifically, cell culture., This research was funded by Ministerio de Economía y Competitividad (MAT2017-83014-C2-2-P and MAT 2014-53437-C2-1P) from Spain and by Agencia Nacional de Promoción Científica y Tecnológica (PICT-2013-0905, PICT-2015-0346) and Universidad Nacional de La Plata (PPID-2018) from Argentina, We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

How Confinement Affects the Nucleation, Crystallization, and Dielectric Relaxation of Poly(butylene succinate) and Poly(butylene adipate) Infiltrated within Nanoporous Alumina Templates

  • Safari, M.
  • Maiz, J.
  • Shi, G.
  • Juanes, Diana
  • Liu, G.
  • Wang, D.
  • Mijangos, Carmen
  • Alegría, Ángel
  • Müller, A.J.
This work describes the successful melt infiltration of poly(butylene succinate) (PBS) and poly(butylene adipate) (PBA) within 70 nm diameter anodic aluminum oxide (AAO) templates. The infiltrated samples were characterized by SEM, Raman, and FTIR spectroscopy. The crystallization behaviors and crystalline structures of both polymers, bulk and confined, were analyzed by differential scanning calorimetry (DSC) and grazing incidence wide angle X-ray scattering (GIWAXS). DSC revealed that a change in the nucleation process occurred from heterogeneous nucleation for bulk samples to homogeneous nucleation for infiltrated PBA and to surface-induced nucleation for infiltrated PBS. GIWAXS results indicate that PBS nanofibers crystallize in the α-phase, as well as their bulk samples. However, PBA nanofibers crystallize just in the β-phase, whereas PBA bulk samples crystallize in a mixture of α- and β-phases. The crystal orientation within the pores was determined, and differences between PBS and PBA were also found. Finally, broadband dielectric spectroscopy was applied to study the segmental dynamics for bulk and infiltrated samples. The glass temperature was found to significantly decrease in the PBS case upon infiltration, while that of PBA remained unchanged. These differences were correlated with the higher affinity of PBS to the AAO walls than PBA, in accordance with their nucleation behavior (surface-induced versus homogeneous nucleation, respectively)., POLYMAT and ICTP-CSIC Institutions acknowledge financial support from the Spanish Ministry of Science, Innovation, and Universities (MAT2017-83014-C2-1-P and MAT2017- 83014-C2-2-P). M.S. gratefully acknowledges the award of a PhD fellowship by POLYMAT Basque Center for Macromolecular Design and Engineering. J.M. acknowledges support from the Provincial Council of Gipuzkoa under the program Fellow Gipuzkoa and “Fomento San Sebastián” in the framework program “Retorno del Talento Local” Donostia up! 2016. G.L, D.W., and A.J.M acknowledge the support from the National Natural Science Foundation of China (51820105005, 21873109) and National Key R&D Program of China (2017YFE0117800). G.L. acknowledges the support from the Youth Innovation Promotion Association of the Chinese Academy of Sciences (2015026). This work has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska- Curie grant agreement no. 778092. The UPV/EHU team gratefully acknowledges the financial contribution of the Basque Government through grants IT1309-19 and IT1175- 19.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The application of spatially restricted geometries as a unique route to produce well-defined poly(vinyl pyrrolidones) via free radical polymerisation

  • Tarnacka, M.
  • Maksym, P.
  • Zinba, A.
  • Mielanczyk, A.
  • Geppert-Rybczynska, M.
  • León-Boigues, Laia
  • Mijangos, Carmen
  • Kaminski, K.
  • Paluch, Marian
We report, for the first time, the metal-free green synthesis of linear poly(vinyl pyrrolidone) (PVP) homopolymers of molecular weight higher than 100 kg mol and narrow dispersities via thermal and photo-induced free radical polymerisation carried out within alumina nanoporous membranes acting as >nanoreactors>., K. K. and M. T. are thankful for financial support from the Polish National Science Centre within SONATA Bis project (Dec. no. 2015/18/E/ST4/00320). M. T. is thankful for financial support from the Foundation for Polish Science (FNP). L. L.-B. and C. M. acknowledge MINECO for financial support (MAT2017-83014-C2-2-P).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Compact polyelectrolyte hydrogels of gelatin and chondroitin sulfate as ion¿s mobile media in sustainable all-solid state electrochemical devices

  • González, Jimena
  • Burlaka, Arsen
  • Paz, José
  • Carretero-González, Javier
  • Hernández, Rebeca
The creation of flexible and high strength hydrogel materials from natural polymers as low cost and safe solid electrolytes is an area of intense research nowadays. We present a novel approach for the preparation of gelatin and chondroitin sulfate hydrogel complexes by using a simple centrifugation process. The innovative dual-bio-gel-network is able to swell and shrink upon changes on the pH and NaCl concentration. The solid bio-gels sandwiched between two macroporous carbon electrode materials are assembled in symmetric cells and their electrochemical properties are evaluated by cyclic voltammetry, galvanostatic, and impedance spectroscopy measurements. The cells exhibit areal capacitance values up to 2.74 mF cm¿2 (3.1 F g¿1) and a low resistance value of 12 Ohm cm2 for graphene electrode materials. These properties are the consequence of the successful infiltration of the solid gel inside the porous structure of the carbon electrode that boosts the charge transfer at the biopolymer/carbon electrode interphase. The results obtained may provide additional inspiration in the emerging field of bioelectronics, where biocompatible and powered systems are of the utmost importance., The authors would like to thank David Go´mez for assistance regarding scanning electron microscopy (SEM). Rebeca Herna´ndez is a member of the SusPlast platform from the Spanish National Research Council (CSIC). This study was supported by CONICET (National Scientific and Technical Research Council), ANPCyT (National Agency of Scientific and Technology Promotion, PICT 2016-1905), UNMdP (National University of Mar del Plata) and Spanish Ministry of Economy, Industry and Competitiveness (MINECO) (grants: MAT2017-83014-C2-2-P and MAT2017-88232-P). Javier Carretero-Gonza´lez acknowledges the Ramon y Cajal Fellow (RYC-2015-17722) from the Spanish Ministry of Economy, Industry and Competitiveness (MINECO)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of nanoconfinement on the isodimorphic crystallization of poly(butylene succinate-ran-caprolactone) random copolymers

  • Safari, Maryam
  • León-Boigues, Laia
  • Shi, Guangyu
  • Maiz, Jon
  • Liu, Guoming
  • Wang, Dujin
  • Mijangos, Carmen
  • Müller, Alejandro J.
In this paper, we study for the first time the effect of hard confinement on the isodimorphic crystallization of random copolyesters. A series of poly(butylene succinate-ran-caprolactone) samples encompassing the entire composition range were successfully infiltrated into nanoporous alumina templates (anodic aluminum oxide (AAO)) with a fixed diameter of 100 nm. The samples were characterized using scanning electron microscopy (SEM), Raman spectroscopy, Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and grazing-incidence wide-angle X-ray scattering (GIWAXS). FTIR proved that poly(butylene succinate) (PBS)-rich nanofibers showed interactions between the copolyester chains and the walls of the AAO templates; however, the poly(ε-caprolactone) (PCL)-rich nanofibers did not show any interaction with the AAO walls. All infiltrated samples experienced a very large decrease in crystallization temperature, as expected, since the level of confinement is large enough to suppress heterogeneous nucleation. In spite of this, all copolymers were able to crystallize, regardless of composition. Additionally, when Tc or Tm is plotted versus copolymer composition, a clear pseudoeutectic point is observed. These results indicate that the isodimorphic behavior of the copolyesters is maintained under hard confinement. Infiltrated PCL undergoes homogeneous nucleation (inside the nanopore volume) as expected by the lack of interaction with the AAO walls. On the other hand, PBS exhibited a surface nucleation mechanism triggered by the interactions with the AAO walls. In the case of random copolymers, all PCL-rich copolymers nucleated homogeneously. However, in the case of PBS-rich copolymers, the nucleation gradually changed from surface-induced nucleation for neat PBS to homogeneous nucleation as the PCL concentration in the copolymers increased and the interactions of PBS chains with the AAO walls are diluted. The confinement under 100 nm nanopores did not change the orientation of the PBS or PCL phase crystals, which kept their chain direction perpendicular to the pore axis, as demonstrated by GIWAXS., The authors acknowledge the support of the National Key R&D Program of China (2017YFE0117800) and the National Natural Science Foundation of China (21873109, 51820105005). The authors would also like to acknowledge financial support provided by the BIODEST project; this project has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement no. 778092. The UPV/EHU and ICTP-CSIC Institutions acknowledge financial support from the Spanish Ministry of Science, Innovation, and Universities (MAT2017-83014-C2-2-P and MAT2017-83014-C2-1-P). M.S. thankfully acknowledges her Ph.D. fellowship by POLYMAT Basque Center for Macromolecular Design and Engineering. The authors would like to thank Dr. Antxon Martinez de Ilarduya and Prof. Sebastian Muñoz for their help in the synthesis of copolyesters at UPC, Spain. J.M. gratefully acknowledges support from the Provincial Council of Gipuzkoa under the program Fellow Gipuzkoa and “Fomento San Sebastián” in the framework program “Retorno del Talento Local” Donostia up! 2016., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Reactivity Ratios and Surface Properties of Confined and Bulk ATRP Copolymerization of Butyl Methacrylate and 2-Hydroxyethyl Acrylate

  • León-Boigues, Laia
  • Von Bilderling, Catalina
  • Pietrasanta, Lía
  • Azzaroni, O.
  • Mijangos, Carmen
  • Giussi, Juan M.
Tunable hardness materials have shown fascinating properties, which place them as potential materials for use in different technological fields. This work deals with the bulk and confined synthesis of copolymers based on butyl methacrylate and 2-hydroxyethyl acrylate (HEA), prepared by atom transfer radical copolymerization in the entire composition range using conventional and anodic aluminum oxide (AAO) reactors, respectively. In each case, reactivity ratios and molecular weights were calculated using nuclear magnetic resonance, and the latter were compared to the values obtained by size exclusion chromatography. Differential scanning calorimetry and thermogravimetric analysis allowed to evaluate thermal transition and decomposition profiles and, with this data, compare the differences in each system, bulk and confined. Finally, the nanostructures extracted from the AAO nanoreactor were evaluated on the surface by atomic force microscopy and the water contact angle. Interestingly, our results revealed remarkable differences in the reactivity ratios under bulk and confined conditions. Nanopolymerization increased the reactivity of the HEA monomer, and the thermal and surface analysis supported this observation. Indeed, these results will bring valuable knowledge that will advance the field of application of nanopolymeric materials as well as their potential applications in surface science., The funding for this research effort comes primarily from MAT2017-83014-C2-2-P (Ministerio de Economía, Industria y Competitividad, Spain), PICT-2017-3515, PICT-2017-1161 (Ministerio de Ciencia y Tecnología, Argentina), and PPID- 2018-X027 (Universidad Nacional del La Plata, Argentina). J.M.G., C.v.B., L.P., and O.A. are fellow members of CONICET, Argentina. LLB acknowledged the financial support of BES-2015-074403 for her stay in the Soft Matter Laboratory at INIFTA
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

In Situ Synthesis of Poly(butyl methacrylate) in Anodic Aluminum Oxide Nanoreactors by Radical Polymerization: A Comparative Kinetics Analysis by Differential Scanning Calorimetry and 1H-NMR

  • León-Boigues, Laia
  • Pérez, Luis Andrés
  • Mijangos, Carmen
n this work, we explore the ability to generate well-defined poly(butyl methacrylate) (PBMA) nanostructures by “in situ” polymerization of butyl methacrylate monomer (BMA). PBMA nanostructures of high and low aspect ratios have been successfully obtained through the free radical polymerization (FRP) of a BMA monomer in anodic aluminum oxide (AAO) nanoreactors of suitable size. A polymerization kinetics process has been followed by differential scanning calorimetry (DSC) and proton Nuclear Magnetic Resonance spectroscopy (1H-NMR).The determination of the kinetics of polymerization through DSC is based on a quick and direct analysis of the exothermic polymerization process, whereas the analysis through 1H-NMR also allows the unambiguous chemical analysis of the resulting polymer. When compared to bulk polymerization, both techniques demonstrate confinement effects. Moreover, DSC and 1H-NMR analysis give the same kinetics results and show a gel-effect in all the cases. The number average molecular weight (Mn) of the PBMA obtained in AAO of 60–300 nm are between 30·103–175·103 g/mol. Even if the Mn value is lower with respect to that obtained in bulk polymerization, it is high enough to maintain the polymer properties. As determined by SEM morphological characterization, once extracted from the AAO nanoreactor, the polymer nanostructures show controlled homogeneous aspect/size all throughout the length of nanopillar over a surface area of few cm2. The Young’s modulus of low aspect ratio PBMA nanopillars determined by AFM gives a value of 3.1 ± 1.1 MPa. In this work, a 100% of PBMA polymer nanostructures are obtained from a BMA monomer in AAO templates through a quick double process: 30 min of monomer immersion at room temperature and 90 min of polymerization reaction at 60 ◦C. While the same nanostructures are obtained by polymer infiltration of PBMA at 200 ◦C in about 6 h, polymerization conditions are much softer than those corresponding to the polymer infiltration process. Furthermore, the 1H-NMR technique has been consolidated as a tool for studying the kinetics of the copolymerization reactions in confinement and the determination of monomer reactivity ratios., This research was funded by Spanish Ministry of Science, Innovation and Universities (MINECO), grant number MAT2017-83014-C2-2-P, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nanostructural organization of thin films prepared by sequential dip-coating deposition of poly(butylene succinate), poly(ε-caprolactone) and their copolyesters (PBS-ran-PCL)

  • Peñas, Mario I.
  • Ocando, C.
  • Penott-Chang, E.
  • Safari, Maryam
  • Ezquerra, Tiberio A.
  • Rebollar, Esther
  • Nogales, Aurora
  • Hernández, Rebeca
  • Müller, A.J.
10 pags., 7 figs., 2 tabs., In this work, we prepare and characterize multiphasic thin films containing poly(ε-caprolactone), PCL, poly(butylene succinate), PBS, and a poly (butylene succinate-ran-ϵ-caprolactone) (PBS-ran-PCL) random copolyester. To that aim, thin films were prepared by sequential dipping of a silicon substrate into chloroform solutions of the respective polymers. The preparation method resulted in films with varying compositions of PCL and PBS components depending on the initial concentration of the dipping solutions and the number of dipping steps employed for the preparation of the samples. Atomic force microscopy (AFM), grazing incidence X-ray scattering at wide angle (GIWAXS) and scattering-type scanning near-field optical microscopy (s-SNOM) and Fourier transform infrared nanospectroscopy (nano-FTIR) were employed to characterize the films obtained. As chloroform can dissolve all components, the final composition of the film was always rich in the last deposited layer component. The thin films obtained were semicrystalline with a complex axialitic or dendritic morphology of the dominant component (that one deposited last) with traces of the other components, whose presence and location was revealed by s-SNOM/nano-FTIR., This study was supported by Spanish Ministry of Science, Innovation and Universities (MAT2017- 83014-C2-1-P, MAT2017-83014-C2-2-P, PID2019-107514 GB-I00/AEI/ 10.13039/501100011033 and PID2019-106125 GB-I00/AEI/ 10.13039/501100011033). We also acknowledge funding by Basque Government through grant IT1309-19. The authors acknowledge beamtime access at ALBA BL11 via proposal 2018072905 and the assistance of JC Martinez during the measurements. We would also like to thank the financial support provided by the BIODEST project; this project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 778092. CO wants to acknowledge “Diputaci on Foral de Gipuzkoa” in the framework program “Fellows Gipuzkoa de Atracci ́on y Retenci ́on de Talento”. RH is member of the Interdisci-plinary Platform for Sustainable Plastics towards a Circular Economy (SusPlast) from the Spanish National Research Council (CSIC).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Free radical nanocopolymerization in AAO porous materials: Kinetic, copolymer composition and monomer reactivity ratios

  • León-Boigues, Laia
  • Navarro Crespo, Rodrigo
  • Mijangos, Carmen
Free radical (FR) polymerization in non-interconnected nanochannels of anodic aluminum oxide templates (AAO) represents a suitable and less energetic method to prepare supported hierarchical polymer nanostructures when compared to the main alternative which is through polymer melt infiltration. Nevertheless, FR copolymerization has not been studied in the nanoscopic templates even if it is of great interest to produce a wide variety of polymeric materials with modulated properties. In this work, we explore the ability to copolymerize butyl methacrylate (BMA) and 2-hydroxyethyl acrylate (HEA) monomers in lab-made Anodic Aluminum Oxide (AAO) nanoreactors. Thus, P(BMA/HEA) copolymer has been successfully synthesized to a 100% conversion degree within AAO geometries at relatively low temperatures in ~90 min. The reaction of copolymerization in confinement showed faster polymerization rates than bulk copolymerization. H NMR allowed to follow monomer conversion in the AAO nanoreactor for a wide range of monomer compositions, from 0 to 100% whereas differential scanning calorimetry (DSC) was employed to quickly observe the overall kinetics of the copolymerization reaction. At conversion degrees <20%, the reactivity ratios of BMA and HEA monomers was determined and this was related to the distribution of the monomers on the P(BMA/HEA) copolymer synthesized in confinement and bulk. HEA is the most reactive monomer in the copolymerization reaction in confinement and in bulk, however, in the restricted geometry of AAO template, the reactivity ratios shift slightly away from the preferential incorporation of HEA. Finally, SEM images of P(BMA/HEA) copolymer nanofibers extracted from the AAO nanoreactor showed an homogeneous and ordered nanostructured morphology. Since copolymer nanostructures are composed of monomers that combine interesting softening properties with a high swelling capacity, the nanostructured copolymer could be of special interest to surface science studies and specifically for coatings applications., The funding for this research effort comes primarily from MAT2017- 83014-C2-2-P, MAT2017-87204-R and RTI2018-096636-J-100 (Minis- terio de Ciencia e Innovaci ́on, Spain), Supporting with FPI grant (BES- 2015-074403) to develop a PhD thesis
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Polyelectrolyte multilayer films based on natural polymers: From fundamentals to Bio-Applications

  • Criado-González, Miryam
  • Mijangos, Carmen
  • Hernández, Rebeca
Natural polymers are of great interest in the biomedical field due to their intrinsic properties such as biodegradability, biocompatibility, and non-toxicity. Layer-by-layer (LbL) assembly of natural polymers is a versatile, simple, efficient, reproducible, and flexible bottom-up technique for the development of nanostructured materials in a controlled manner. The multiple morphological and structural advantages of LbL compared to traditional coating methods (i.e., precise control over the thickness and compositions at the nanoscale, simplicity, versatility, suitability, and flexibility to coat surfaces with irregular shapes and sizes), make LbL one of the most useful techniques for building up advanced multilayer polymer structures for application in several fields, e.g., biomedicine, energy, and optics. This review article collects the main advances concerning multilayer assembly of natural polymers employing the most used LbL techniques (i.e., dipping, spray, and spin coating) leading to multilayer polymer structures and the influence of several variables (i.e., pH, molar mass, and method of preparation) in this LbL assembly process. Finally, the employment of these multilayer biopolymer films as platforms for tissue engineering, drug delivery, and thermal therapies will be discussed., This research was funded by the Spanish Ministry of Science, Innovation, and Universities (MAT2017-83014-C2-2-P). R.H. and C.M. are members of the Interdisciplinary Platform for Sustainable Plastics towards a Circular Economy (SusPlast) from the Spanish National Research Council (CSIC)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nanopolimerización en confinamiento: Nano-reactores AAO y otros sistemas porosos

  • León-Boigues, Laia
  • Mijangos, Carmen
Este trabajo recoge el potencial de las geo- metrías de óxido de aluminio anodizado (AAO) y otros materiales nanoporosos para la síntesis directa de polímeros nanoestructu- rados a partir de los monómeros precursores, mediante reacciones de nanopolimerización. En él se describen brevemente las geometrías AAO y el método de fabricación. Asimismo, se presentan algunos ejemplos de polimeri- zación in situ recogidos de la bibliografía así como los desarrollados en nuestro grupo de investigación. Además incluye los estudios más recientes sobre la copolimerización por radicales libres (FRP) y controlada por trans- ferencia de átomo (ATRP) en geometrías AAO. En ambos casos se describe la determinación de las relaciones de reactividad de los mo - nómeros. Por último, se recogen muy breve- mente algunos trabajos sobre polimerización en otros sistemas porosos, Las autoras agradecen la financiación económica del MINECO (MAT2017-83014-C2-2-P)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Dynamic covalent chemistry of imines for the development of stimuli-responsive chitosan films as carriers of sustainable antifungal volatiles

  • Heras-Mozos, Raquel
  • Hernández, Rebeca
  • Gavara, Rafael
  • Hernández Muñoz, Pilar
The aim of this work was to develop pH-responsive antifungal chitosan (CS) films based on the reversible bonding of the naturally occurring volatile aldehydes: cinnamaldehyde (CN), citral (CT) and their saturated derivatives hydrocinnamaldehyde (HC) and citronellal (CO) that have antifungal properties. Acid-catalyzed bonds were created by condensation of the carbonyl functional group of aldehydes with amino groups in CS films to yield imines which was confirmed by Attenuated Total Reflectance – Fourier Transform Infrared Spectroscopy (ATR-FTIR) and C solid-state nuclear magnetic resonance (C NMR). α,β-unsaturated CN and CT were more reactive than their derivatives, reaching around 60% degree of substitution of aldehydes to chitosan films compared to 25% for HC and CO. Imines created with α,β-unsaturated aldehydes and aromatic HC remained quite stable at neutral pH. With regard to the hydrolysis of imines at pH 4, around 35% of anchored α,β-unsaturated aldehydes were lost, this value being 80% for HC whereas 100% of CO was lost after the first week of film immersion in buffered solution. The differences in the extent of hydrolysis of imine bonds depended on both the pH of the aqueous medium and also the chemical structure of the aldehyde. Curiously, it was observed α,β-unsaturated aldehydes exerted crosslinking effects on CS films since they did not disintegrate in water at pH 3. The crosslinking mechanism is discussed in the text. The antifungal activities of the developed films were tested against Penicillium expansum and Botrytis cinerea by the micro-atmosphere method using a double Petri dish system. Mold growth was completely inhibited by imine-CN-CS films activated at pH 4., The authors acknowledge Levi Lopez Vilanova for solid state NMR measurements. The authors want to thank the Spanish Ministry of Sci- ence, Innovation and Universities for financial support (projects RTI2018-093452-B-I00 and MAT2017-83014-C2-2-P and R. Heras’s predoctoral contract). P. H-M, RG and RH are members of the Inter- disciplinary Platform for Sustainable Plastics towards a Circular Econ- omy (SusPlast) from the Spanish National Research Council (CSIC, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Injectable Tripeptide/Polymer Nanoparticles Supramolecular Hydrogel: A Candidate for the Treatment of Inflammatory Pathologies

  • Criado-González, Miryam
  • Espinosa-Cano, Eva
  • Rojo, Luis
  • Boulmedais, F.
  • Aguilar, María Rosa
  • Hernández, Rebeca
Supramolecular peptide-based hydrogels attract great attention in several fields, i.e., biomedicine, catalysis, energy, and materials chemistry, due to the noncovalent nature of the self-assembly and functional tunable properties defined by the amino acid sequence. In this work, we developed an injectable hybrid supramolecular hydrogel whose formation was triggered by electrostatic interactions between a phosphorylated tripeptide, Fmoc-FFpY (F: phenylalanine, pY: phosphorylated tyrosine), and cationic polymer nanoparticles made of vinylimidazole and ketoprofen (poly(HKT-co-VI) NPs). Hydrogel formation was assessed through inverted tube tests, and its fibrillary structure, around polymer NPs, was observed by transmission electron microscopy. Interestingly, peptide self-assembly yields the formation of nontwisted and twisted fibers, which could be attributed to β-sheets and α-helix structures, respectively, as characterized by circular dichroism and infrared spectroscopies. An increase of the elastic modulus of the Fmoc-FFpY/polymer NPs hybrid hydrogels was observed with peptide concentration as well as its injectability property, due to its shear thinning behavior and self-healing ability. After checking their stability under physiological conditions, the cytotoxicity properties of these hybrid hydrogels were evaluated in contact with human dermal fibroblasts (FBH) and murine macrophages (RAW 264.7). Finally, the Fmoc-FFpY/polymer NPs hybrid hydrogels exhibited a great nitric oxide reduction (∼67%) up to basal values of pro-inflammatory RAW 264.7 cells, thus confirming their excellent anti-inflammatory properties for the treatment of localized inflammatory pathologies., Financial support from Spanish Research Council (CSIC) and French Research Council (CNRS) for the project PICS (International Emerging Actions) 2018 HYDROPRINT isgratefully acknowledged. The authors also acknowledge funding from CIBER-BBN, Spanish Ministry of Science, Innovation and Universities (MAT2017-83014-C2-2-P and MAT2017-84277-R), and the training program for Academic Staff, grant number FPU15/06109, of the Spanish Ministry of Education Culture and Sport., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A Review on Current Strategies for the Modulation of Thermomechanical, Barrier, and Biodegradation Properties of Poly (Butylene Succinate) (PBS) and Its Random Copolymers

  • Peñas, Mario I.
  • Pérez-Camargo, Ricardo A.
  • Hernández, Rebeca
  • Müller, Alejandro J.
The impact of plastics on the environment can be mitigated by employing biobased and/or biodegradable materials (i.e., bioplastics) instead of the traditional “commodities”. In this context, poly (butylene succinate) (PBS) emerges as one of the most promising alternatives due to its good mechanical, thermal, and barrier properties, making it suitable for use in a wide range of applications. Still, the PBS has some drawbacks, such as its high crystallinity, which must be overcome to position it as a real and viable alternative to “commodities”. This contribution covers the actual state-of-the-art of the PBS through different sections. The first section reviews the different synthesis routes, providing a complete picture regarding the obtained molecular weights and the greener alternatives. Afterward, we examine how different strategies such as random copolymerization and the incorporation of fillers can effectively modulate PBS properties to satisfy the needs for different applications. The impact of these strategies is evaluated in the crystallization behavior, crystallinity, mechanical and barrier properties, and biodegradation. The biodegradation is carefully analyzed, highlighting the wide variety of methodologies existing in the literature to measure PBS degradation through different routes (hydrolytic, enzymatic, and soil)., This research was funded by Spanish Ministry of Science, Innovation and Universities (MAT2017-83014-C2-1-P, MAT2017-83014-C2-2-P). We would also like to acknowledge the financial support from the BIODEST project; this project has received funding from the European Union’s Hori- zon 2020 Research and Innovation Programme under the Marie Skłodowska-Curie grant agreement No. 778092. R.A.P.-C. is supported by the China Postdoctoral Science Foundation (2020M670462) and the National Natural Science Foundation of China (NSFC) (51820105005, 52050410327). M.I.P. is supported with an FPI contract (PRE2018-086104) to develop a PhD thesis. R.H. is member of the CSIC Interdisciplinary Thematic Platform (PTI+) Interdisciplinary Platform for Sustainable Plastics towards a Circular Economy+. (PTI-SusPlast+).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

pH modulates antibacterial activity of hydroxybenzaldehyde derivatives immobilized in chitosan films via reversible Schiff bases and its application to preserve freshly-squeezed juice

  • Heras-Mozos, Raquel
  • López-Carballo, Gracia
  • Hernández, Rebeca
  • Gavara, Rafael
  • Hernández Muñoz, Pilar
Antimicrobial food grade hydroxybenzaldehyde derivatives were immobilized on the surface of chitosan films by means of reversible Schiff bases. Spectroscopy and elemental analysis evidenced the different ability of the aldehydes to form Schiff bases with chitosan. Chitosan films modified with Schiff bases of aldehydes exerted antimicrobial properties against E. coli under mild acidic environments. The efficacy of the films lied on the reversibility of synthetized imine bonds and release of the aldehydes which was promoted in mildly acid aqueous solutions. Besides acidity, imine bond reversibility depended on the chemical structure of the aldehyde covalently bonded. Films carrying salicylaldehyde presented the highest in vitro antimicrobial performance and thus, they were chosen to evaluate their effectivity in inhibiting E. coli proliferation in freshly-squeezed carrot-orange juice. Films were successfully activated by the acid environment of the juice and reduced the population of the inoculated pathogen. Salicylaldehyde migrated to the juice did not exert toxic effects on Caco-2 cells., The authors acknowledge the financial support of the Spanish Ministry of Science and Innovation (Grants RTI2018-093452-B-I00, MAT2017-83014-C2-2P and BES-2016-077380 funded by MCIN/AEI/ 10.13039/501100011033 and by ERDF A way of making Europe). PHM, RH and RG are members of the Interdisciplinary Platform for Sustainable Plastics towards a Circular Economy (SusPlast) from the Spanish National Research Council (CSIC) (CSIC program for the Spanish Recovery, Transformation and Resilience Plan funded by the Recovery and Resilience Facility of the European Union, established by the Regulation (EU) 2020/2094)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tunable enzymatic biodegradation of poly(butylene succinate): biobased coatings and self-degradable films

  • Peñas, Mario I.
  • Criado-González, Miryam
  • Martínez de Ilarduya, Antxon
  • Flores, Araceli
  • Raquez, Jean-Marie
  • Mincheva, Rosica
  • Müller, Alejandro J.
  • Hernández, Rebeca
Biodegradation of polyesters driven by enzymes is considered as one of the most effective way of degradation of these materials, as a way to control plastics accumulation in the environment. In this study, we present two different strategies to tune the enzymatic degradation of PBS films triggered by a lipase from Pseudomonas cepacia. Firstly, the kinetics of enzymatic degradation of PBS films was regulated by applying multilayer coats of polysaccharide alginate and chitosan (Alg/Chi) films. Secondly, self-degradable PBS films were prepared by embedding lipase-filled alginate particles. For comparison purposes, a detailed enzymatic degradation study of neat PBS films exposed to a lipase from P. cepacia in solution was made to determine the main experimental parameters influencing their degradation in solution. The results showed that an increase in enzyme concentration increased the degradation extent and rate of neat PBS films. At a fixed enzyme concentration, stirring of the solution containing the enzyme and the PBS also increased the biodegradation rate. In the case of the PBS films coated with a different number of Alg/Chi layers by spray-assisted LbL and subjected to enzymatic degradation experiments in solution, the extent of degradation was found to be dependent on the number of protective coating layers. Therefore, the Alg/Chi biobased coating constitutes an effective barrier to the diffusion of the lipase, thus proving its effectiveness in modulating the enzymatic activity as a function of coating thickness. In the case of self-degradable PBS containing lipase-embedded alginate beads (employed to protect the enzyme during high-temperature processing), only limited biodegradation was observed as the amount of encapsulated enzyme employed was too small. Nonetheless, these results are promising, as the enzymatic activity –indicative of the degradation capacity of the enzyme– determined for all these samples was about 2 orders of magnitude lower than that of previous assays., This research was funded by the projects MAT2017-83014-C2-1-P, MAT2017-83014-C2-2-P, PID2020-113045GB-C21 and PID2020-113045GB-C22 funded by MCIN/ AEI /10.13039/501100011033 and by the Basque Government through grant IT1503-22. We would also like to acknowledge the financial support from the BIODEST project; this project has received funding from the European Union’s Horizon 2020 Research and Innovation Programme under the Marie Skłodowska-Curie grant agreement No. 778092. M.I.P. is supported with an FPI contract (PRE2018-086104) to develop a PhD thesis. R.H. is member of the CSIC Interdisciplinary Thematic Platform (PTI+) Interdisciplinary Platform for Sustainable Plastics towards a Circular Economy+ (PTI-SusPlast+). J.M.R. is a FRS-FNRS Senior Research Associate. Authors would also like to thank Dr. Ana Beloqui for helpful discussions on enzymatic activity., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enzymatic Degradation Behavior of Self-Degradable Lipase-Embedded Aliphatic and Aromatic Polyesters and Their Blends

  • Peñas, Mario I.
  • Beloqui, A.
  • Martínez de Ilarduya, A.
  • Suttiruengwong, S.
  • Hernández, Rebeca
  • Müller, A. J.
Over the past decade, the preparation of novel materials by enzyme-embedding into biopolyesters has been proposed as a straightforward method to produce self-degrading polymers. This paper reports the preparation and enzymatic degradation of extruded self-degradable films of three different biopolyesters: poly(lactic acid) (PLA), poly(butylene adipate-co-terephthalate) (PBAT), and poly(butylene succinate) (PBS), as well as three binary/ternary blends. Candida antarctica lipase B (CalB) has been employed for the enzyme-embedding procedure, and to the best of our knowledge, the use of this approach in biopolyester blends has not been reported before. The three homopolymers exhibited differentiated degradation and suggested a preferential attack of CalB on PBS films over PBAT and PLA. Moreover, the self-degradable films obtained from the blends showed slow degradation, probably due to the higher content in PLA and PBAT. These observations pave the way for exploring enzymes capable of degrading all blend components or an enzymatic mixture for blend degradation., This research was funded by the projects MAT2017-83014- C2-1-P, MAT2017-83014-C2-2-P, PID2020-113045GB-C21, and PID2020-113045GB-C22 funded by MCIN/AEI/ 10.13039/501100011033 and by the Basque Government through grant IT1503-22. We would also like to acknowledge the financial support from the BIODEST project; this project has received funding from the European Union’s Horizon 2020 Research and Innovation Programme under the Marie Skłodowska-Curie grant agreement no. 778092. M.I.P. is supported with an FPI contract (PRE2018-086104) to develop a PhD thesis. A.B. gratefully acknowledges the financial support from the Spanish Research Agency (AEI) for the financial support (RYC2018-025923-I from RyC program - MCIN/AEI/10.13039/501100011033 and FSE “invierte en tu futuro”). R.H. is member of the CSIC Interdisciplinary Thematic Platform (PTI+) Interdisciplinary Platform for Sustainable Plastics towards a Circular Economy+ (PTI- SusPlast+). We also acknowledge the Department of Materials Science and Engineering, Silpakorn University for sample fabrications.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Salt-induced Fmoc-tripeptide supramolecular hydrogels: a combined experimental and computational study of the self-assembly

  • Criado-González, Miryam
  • Peñas, Mario I.
  • Barbault, F.
  • Müller, Alejandro J.
  • Boulmedais, F.
  • Hernández, Rebeca
Delving into the mechanism behind the molecular interactions at the atomic level of short-sequence peptides plays a key role in the development of nanomaterials with specific structure-property-function relationships from a bottom-up perspective. Due to their poor water solubility, the self-assembly of Fmoc-bearing peptides is usually induced by dissolution in an organic solvent, followed by a dilution step in water, pH changes, and/or a heating-cooling process. Herein, we report a straightforward methodology for the gelation of Fmoc-FFpY (F: phenylalanine; Y: tyrosine; and p: PO), a negatively charged tripeptide, in NaCl solution. The electrostatic interactions between Fmoc-FFpY and Na ions give rise to different nanofibrillar hydrogels with rheological properties and nanofiber sizes modulated by the NaCl concentration in pure aqueous media. Initiated by the electrostatic interactions between the peptide phosphate groups and the Na ions, the peptide self-assembly is stabilized thanks to hydrogen bonds between the peptide backbones and the π-π stacking of aromatic Fmoc and phenyl units. The hydrogels showed self-healing and thermo-responsive properties for potential biomedical applications. Molecular dynamics simulations from systems devoid of prior training not only confirm the aggregation of peptides at a critical salt concentration and the different interactions involved, but also corroborate the secondary structure of the hydrogels at the microsecond timescale. It is worth highlighting the remarkable achievement of reproducing the morphological behavior of the hydrogels using atomistic simulations. To our knowledge, this study is the first to report such a correspondence., Financial support from the Spanish Research Council (CSIC) and the French Research Council (CNRS) for the International Emerging Actions 2018 HYDROPRINT project is gratefully acknowledged. The authors also acknowledge the funding from the projects MAT2017-83014-C2-2-P and PID2020113045GB-C22 by MCIN/AEI/10.13039/501100011033 and the ALBA Synchrotron (Proposal number 2021095380). R. H. is a member of the SUSPLAST+ platform of CSIC.