Skip to main content

NANOMATERIALES POLIMERICOS CON MORFOLOGIAS Y FUNCIONES DEFINIDAS MEDIANTE TEMPLATING (EXTRINSECO) Y AUTOENSAMBLADO (INTRINSECO)

MAT2014-53437-C2-1-P

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D (Excelencia / Generación de Conocimiento)
Call year 2014
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nanocomposite chitosan hydrogels based on PLGA nanoparticles as potential biomedical materials

  • Caldas dos Santos, T.
  • Hernández, Rebeca
  • Rescignano, Nicoletta
  • Boff, L.
  • Reginatto, F. H.
  • Simões, C. M. O.
  • Campos, A. M. de
  • Mijangos, Carmen
We report on the preparation and characterization of nanocomposite chitosan hydrogels with embedded poly (lactic-co-glycolic acid) (PLGA) nanoparticles employed for encapsulation of an enriched flavonoid fraction of Cecropia glaziovii Snethl. As a first step, the experimental conditions to obtain homogeneous chitosan hydrogels at 37 °C through gelation with NaHCO were optimized. Then, nanocomposite chitosan hydrogels were prepared through direct incorporation of nanoparticlesat different concentrations ranging from 1 to 10% w/w to gelling aqueous chitosan solutions. The resulting hydrogels were characterized through Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), oscillatory rheological experiments and cytotoxicity tests. FT-IR spectra confirmed the PLGA nanoparticles presence within the chitosan matrix through the absorption peak located at 1750 cm. The presence of the PLGA nanoparticles decreased the thermal stability of the nanocomposite chitosan hydrogels compared to the pure chitosan hydrogel. SEM images allowed observing porous matrixes where nanoparticles appeared to be homogeneously dispersed. The elastic moduli found for nanocomposite chitosan hydrogels varied with the PLGA nanoparticles concentration with a maximum at 3% nanoparticles concentration. Cytotoxicity tests revealed that after 48 h, neither thepure hydrogel nor the nanocomposite chitosan hydrogels with 10% nanoparticles concentration showed toxicity on VERO cells., Talitha Caldas dos Santos thanks Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES) for the graduate scholarship. Financial support from the Spanish Ministerio de Economía y Competitividad (MINECO) (project MAT 2014-53437-C2-1P) is also acknowledged. The authors thank Izabella Thaís da Silva for support in the cytotoxic assays., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Quantitative Nanomechanical Properties of Multilayer Films Made of Polysaccharides through Spray Assisted Layer-by-Layer Assembly

  • Criado-González, Miryam
  • Rebollar, Esther
  • Nogales, Aurora
  • Ezquerra, Tiberio A.
  • Boulmedais, F.
  • Mijangos, Carmen
  • Hernández, Rebeca
9 pags., 8 figs., 2 tabs., Nanomechanical properties of alginate/chitosan (Alg/Chi) multilayer films, obtained through spray assisted layer-by-layer assembly, were studied by means of PeakForce quantitative nanomechanical mapping atomic force microscopy (PF-QNM AFM). Prepared at two different alginate concentrations (1.0 and 2.5 mg/mL) and a fixed chitosan concentration (1.0 mg/mL), Alg/Chi films have an exponential growth in thickness with a transition to a linear growth toward a plateau by increasing the number of deposited bilayers. Height, elastic modulus, deformation, and adhesion maps were simultaneously recorded depending on the number of deposited bilayers. The elastic modulus of Alg/Chi films was found to be related to the mechanism of growth in contrast to the adhesion and deformation. A comparison of the nanomechanical properties obtained for non-cross-linked and thermally cross-linked Alg/Chi films revealed an increase of the elastic modulus after cross-linking regardless alginate concentration. The incorporation of iron oxide nanoparticles (NPs), during the spray preparation of the films, gave rise to nanocomposite Alg/Chi films with increased elastic moduli with the number of incorporated NPs layers. Deformation maps of the films strongly suggested the presence of empty spaces associated with the method of preparation. Finally, adhesion measurements point out to a significant role of NPs on the increase of the adhesion values found for nanocomposite films., Financial support from MINECO (MAT2014-53437-C2-1-P, MAT2014-59187-R MAT2015-66443-C02-1-R and CTQ2013- 43086-P) is gratefully acknowledged. Rebeca Hernández and Esther Rebollar thank MEC for a Ramón y Cajal contract. Miryam Criado thanks MEC for a FPU fellowship and Técnicas Reunidas S.A. for financial support in Residencia de estudiantes., Peer reviewed, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Relaxations and relaxor-ferroelectric-like response of nanotubularly confined poly(vinylidene fluoride)

  • Martín, Jaime
  • Iturrospe, Amaia
  • Cavallaro, Andrea
  • Arbe, Arantxa
  • Stingelin, Natalie
  • Ezquerra, Tiberio A.
  • Mijangos, Carmen
  • Nogales, Aurora
Herein, we elucidate the impact of tubular confinement on the structure and relaxation behavior of poly(vinylidene difluoride) (PVDF) and how these affect the para-/ferroelectric behavior of this polymer. We use PVDF nanotubes that were solidified in anodic aluminum oxide (AAO) templates. Dielectric spectroscopy measurements evidence a bimodal relaxation process for PVDF nanotubes: besides the bulk-like α-relaxation, we detect a notably slower relaxation that is associated with the PVDF regions of restricted dynamics at the interface with the AAO pore. Strikingly, both the bulk-like and the interfacial relaxation tend to become temperature independent as the temperature increases, a behavior that has been observed before in inorganic relaxor ferroelectrics. In line with this, we observe that the real part of the dielectric permittivity of the PVDF nanotubes exhibits a broad maximum when plotted against the temperature, which is, again, a typical feature of relaxor ferroelectrics. As such, we propose that, in nanotubular PVDF, ferroelectric-like nanodomains are formed in the amorphous phase regions adjacent to the AAO interface. These ferroelectric nanodomains may result from an anisotropic chain conformation and a preferred orientation of local dipoles due to selective H-bond formation between the PVDF macromolecues and the AAO walls. Such relaxor-ferroelectric-like behavior has not been observed for nonirradiated PVDF homopolymer; our findings thus may enable in the future alternative applications for this bulk commodity plastic, e.g., for the production of electrocaloric devices for solid-state refrigeration which benefit from a relaxor-ferroelectric-like response., J.M. acknowledges support from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant, agreement No. 654682. A.A. and A.I. acknowledge financial support from the Spanish Ministry Ministerio de Economia y Competitividad (MINECO) (code: MAT2015-63704-P (MINECO/FEDER, UE)) and the Eusko Jaurlaritza (Basque Government) (code: IT-654-13). A.C. would like to acknowledge the financial support of the EPSRC (EP/M014142/1). A.N., T.A.E., and C.M. acknowledge financial support from MINECO (codes: MAT2014-59187-R, MAT2015-66443-C02-1-R, and MAT2014-53437-C2-1P, respectively). N.S. is in addition grateful for support from a European Research Council ERC Starting Independent Research Fellowship under the grant agreement No. 279587., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Confinement effects in the step-growth polymerization within AAO templates and modeling

  • Sanz, Belén
  • Ballard, Nicholas
  • Marcos-Fernández, Ángel
  • Asua, José M.
  • Mijangos, Carmen
Nanostructured polyurethanes have attracted substantial interest for the generation of ¿smart¿ surfaces, but step-growth polymerization at the nanoscale has scarcely been reported. In this work, the synthesis of polyurethanes by step-growth polymerization in the nanocavities of anodized aluminum oxide (AAO) templates is studied, finding that the kinetics of the reaction was faster than in bulk, while the molecular weight and the dispersity were reduced. A mathematical model was developed to explain these differences, taking into account the chemical and physical interactions encountered in the reaction between the monomers (diisocyanate and dialcohol) for nanoconfined in AAO and bulk. In nanoconfinement, the polyaddition is catalyzed by hydroxyl groups on the pore wall, resulting in an increase in the rate of polymerization during the early stages of the reaction. At high conversions, the limited diffusion of the polymer chains results in a slower polymerization and a dispersity lower than that expected from bulk., Ministerio de Economía y Competitividad (MAT2014-53437-C2- 1P, MAT2017-83014-C2-2-P and CTQ2016-80886R) and IKERBASQUE foundation, University of Basque Country (UFI/11/56), Basque Government (GVIT 999-16, postdoctoral fellowship and Etortek Nanoiker IE11-304) are gratefully acknowledged for their financial support, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Manufacture and characterization of chitosan/PLGA nanoparticles nanocomposite buccal films

  • Caldas dos Santos, T.
  • Rescignano, Nicoletta
  • Boff, L.
  • Reginatto, F. H.
  • Simões, C. M. O.
  • Machado de Campos, M.
  • Mijangos, Carmen
Oral bioavailability of C-glycosyl flavonoid enriched fraction of Cecropia glaziovii (EFF-Cg) is limited due to its chemical complexity. The purpose of this study is the prospective evaluation of chitosan buccal films impregnated with EFF-Cg-loaded nanospheres as a drug delivery system for labial herpes treatment or for buccal administration. EFF-Cg-loaded PLGA nanospheres were prepared by double emulsion solvent evaporation technique. Nanoparticles were embedded into buccoadhesive chitosan films in different concentrations in order to obtain nanocomposite films. Films were characterized in term of morphology, mechanical properties and water absorption test. Furthermore a cytotoxicity assay was analyzed to evaluate the biocompatibility of systems. The results obtained from these analyses revealed that nanocomposite films present transparent appearance in all composition and Scanning Electron Microscopy (SEM) images show a continuous and compact section structure. Compared to the control film, mechanical responses of nanocomposites presented lower tensile strength values and no significant effect on the elongation at break. Dynamic Mechanical Analysis (DMA) tests indicated that increasing of NP concentration caused decreased stiffness and an increased of glass transition temperature values. Direct cytotoxicity test shows that nanoparticles and chitosan films not induce cytotoxic effect. Given the promising results, the study concludes that the developed buccal film impregnated with EFF-Cg-loaded nanospheres could be a promising approach for effective delivery of EFF-Cg., Talitha Caldas dos Santos thanks Coordenac¸ ão deAperfeic¸oamento de Pessoal de Nível Superior (CAPES) forthe graduate scholarship. Financial support from the SpanishMinisterio de Economía y Competitividad (MINECO) (project MAT2014-53437-C2-1P) is also acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A Patterned Butyl Methacrylate-co-2-Hydroxyethyl Acrylate Copolymer with Softening Surface and Swelling Capacity

  • León-Boigues, Laia
  • Bilderling, Catalina von
  • Pietrasanta, Lía I.
  • Azzaroni, O.
  • Giussi, Juan M.
  • Mijangos, Carmen
The tunable swelling and mechanical properties of nanostructures polymers are crucial parameters for the creation of adaptive devices to be used in diverse fields, such as drug delivery, nanomedicine, and tissue engineering. We present the use of anodic aluminum oxide templates as a nanoreactor to copolymerize butyl methacrylate and 2-hydroxyethyl acrylate under radical conditions. The copolymer obtained under confinement showed significant differences with respect to the same copolymer obtained in bulk conditions. Molecular weights, molecular weight dispersities, Young’s modulus, and wetting behaviors were significantly modified. The combination of selected monomers allowed us to obtain nanopillar structures with an interesting softening surface and extraordinary swelling capacity that could be of special interest to surface science and specifically, cell culture., This research was funded by Ministerio de Economía y Competitividad (MAT2017-83014-C2-2-P and MAT 2014-53437-C2-1P) from Spain and by Agencia Nacional de Promoción Científica y Tecnológica (PICT-2013-0905, PICT-2015-0346) and Universidad Nacional de La Plata (PPID-2018) from Argentina, We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

New double-infiltration methodology to prepare PCL–PS core–shell nanocylinders inside anodic aluminum oxide templates

  • Sanz, Belén
  • Blaszczyk-Lezak, Iwona
  • Mijangos, Carmen
  • Palacios, Jordana K.
  • Müller, Alejandro J.
Melt nanomolding of core–shell nanocylinders of different sizes, employing anodic aluminum oxide (AAO) templates, is reported here for the first time. The core–shell nanostructures are achieved by a new melt double-infiltration technique. During the first infiltration step, polystyrene (PS) nanotubes are produced by an adequate choice of AAO nanopore diameter size. In the second step, PCL is infiltrated inside the PS nanotubes, as its melting point (and infiltration temperature) is lower than the glass transition temperature of PS. Scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) measurements verified the complete double-infiltration of the polymers. Differential scanning calorimetry (DSC) experiments show that the infiltrated PCL undergoes a confined fractionated crystallization with two crystallization steps located at temperatures that depend on which surface is in contact with the PCL nanocylinders (i.e., alumina or PS). The melt double-infiltration methodology represents a novel approach to study the effect of the surrounding surface on polymer crystallization under confinement., Financial support from the Spanish Ministerio de Economia y Competitividad (MINECO) under projects MAT2014-53437-C2-1P and MAT2014-53437-C2-2P is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Double-membrane thermoresponsive hydrogels from gelatin and chondroitin sulphate with enhanced mechanical properties

  • Criado-González, Miryam
  • Rey, J. M.
  • Mijangos, Carmen
  • Hernández, Rebeca
Hydrogels made of gelatin (G) and chondroitin sulphate (ChS) have been obtained by a simple method involving layer-by-layer (LbL) deposition. The procedure gives rise to double membrane hydrogels whose thickness can be modulated with pH and concentration. The resulting hydrogels present improved mechanical properties with respect to interpenetrating polymer networks and retain their thermo-responsive behaviour., We would like to thank Diana Juanes for rheological measurements and I. Munoz for confocal Raman spectroscopy. Financial ˜ support from MINECO (MAT2014-53437-C2-1-P) is gratefully acknowledged. Rebeca Hern´andez thanks MEC for a Ram´on y Cajal contract. Miryam Criado thanks MEC for a FPU fellowship and Técnicas Reunidas S. A. for financial support in Residencia de estudiantes., Peer reviewed