Skip to main content

CONTROL DE NANOESTRUCTURAS GENERADAS POR LASER: INTERACCION LASER-MATERIAL Y PROCESOS EN EL PLASMA

CTQ2013-43086-P

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D (Excelencia / Generación de Conocimiento)
Call year 2013
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Time and space-resolved study of a laser-produced SiO plasma

  • Díaz Sol, Luis
  • Camacho, J. J.
IBER2015, Aveiro, Portugal, 6th to 9th September of 2015; http://iber2015.web.ua.pt/, Time and space-resolved study of a laser-produced SiO plasma L. Diaz1 and J. J. Camacho2 1Instituto de Estructura de la Materia, CFMAC, CSIC, Serrano 121, 28006 Madrid, Spain 2Dpto. Química-Física Aplicada, Fac. Ciencias. UAM, Cantoblanco 28049, Madrid Spain E-mail: luis.diaz@csic.es Nanosecond laser-sample interaction involves complex processes of heating, vaporization, ejection of ions, electrons, atoms and molecules, shock waves, plasma initiation, expansion and recombination. Analysis of laser-produced plasmas (LPPs) can be a very challenging task considering its transient nature as well as large variations in plasma properties with space and time. There are numerous diagnostic techniques that can be employed to study the characteristics of laser ablation such as shadowgraphy, interferometry, self-emission imaging using fast gated cameras, optical emission spectroscopy (OES), Langmuir probe, Faraday cup, etc. Each plasma diagnostic tool has its own advantages and limitations. In this work, we present a spatial and temporal analysis of the LPP generated on silicon monoxide SiO. Time-resolved two-dimensional (2D) OES is used to study the expanded distribution of different species ejected during CO2 laser ablation. The formed plasma was found to be strongly ionized yielding Si+, O+, Si2+, O2+, Si3+, O3+ species, rich in neutral silicon and oxygen atoms and very weak molecular bands of SiO [1]. Typical 2D spectral images (transversely excited atmospheric CO2 laser fluence = 72 J/cm2 and Pair = 0.01 Pa) recorded at 0.1 and 0.5 ¿s delays for a fixed gate width time of 0.1 ¿s are given in the above figures. The results show a faster decay of Si3+, O3+, O2+, and Si2+ than of O+, Si+ and Si. The Stark broadening of isolated Si+ lines was employed for deducing the electron density during the plasma expansion. The relative intensities of some Si2+ lines were used to calculate the time evolution of the plasma temperature. By tracking the maximum intensity displacement for some species, its corresponding velocities were deduced. Acknowledgments: We gratefully acknowledge the support received in part by the DGICYT (Spain) project MICINN: CTQ2013-43086 for this research. [1] L. Diaz, J.J. Camacho, J.P. Cid, M. Martin, J.M.L. Poyato, Appl. Phys. A, 117, 125-129 (2014)., We gratefully acknowledge the support received in part by the DGICYT (Spain) project MICINN: CTQ2013-43086 for this research., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Harmonic generation by atomic and nanoparticle precursors in a ZnS laser ablation plasma

  • Oujja, Mohamed
  • López-Quintas, Ignacio
  • Benítez-Cañete, A.
  • de Nalda, R.
  • Castillejo, Marta
Harmonic generation of a driving laser propagating across a laser ablation plasma serves for the diagnosis of multicomponent plumes. Here we study the contribution of atomic and nanoparticle precursors to the generation of coherent ultraviolet and vacuum ultraviolet light as low-order harmonics of the fundamental emission (1064 nm) of a Q-switched Nd:YAG laser in a nanosecond infrared ZnS laser ablation plasma. Odd harmonics from the 3rd up to the 9th order (118.2 nm) have been observed with distinct temporal and spatial characteristics which were determined by varying the delay between the ablation and driving nanosecond pulses and by spatially scanning the plasma with the focused driving beam propagating parallel to the target. At short distances from the target surface (≤1 mm), the harmonic intensity displays two temporal components peaked at around 250 ns and 10 μs. While the early component dies off quickly with increasing harmonic order and vanishes for the 9th order, the late component is notably intense for the 7th harmonic and is still clearly visible for the 9th. Spectral analysis of spontaneous plume emissions help to assign the origin of the two components. While the early plasma component is mainly constituted by neutral Zn atoms, the late component is mostly due to nanoparticles, which upon interaction with the driving laser are subject to breakup and ionization. With the aid of calculations of the phase matching integrals within the perturbative model of optical harmonic generation, these results illustrate how atom and nanoparticle populations, with differing temporal and spatial distributions within the ablation plasma, contribute to the nonlinear medium., Funding has been provided by Ministerio de Economía y Competitividad (MINECO) of Spain under Project CTQ2013-43086-P. I.L-Q., A.B-C. and M.O. thank respectively MINECO, for a FPI fellowship (BES-2011-044738), CSIC, for a JAE-TEC 2010 contract and CSIC for a contract. Fruitful discussions with Dr. Mikel Sanz and Prof. A. Gonzalez-Arroyo are acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Mössbauer and Magnetic Properties of Coherently Mixed Magnetite-Cobalt Ferrite Grown by Infrared Pulsed-Laser Deposition

  • de la Figuera, Juan
  • Quesada, Adrián
  • Martín-García, Laura
  • Sanz, Mikel
  • Oujja, Mohamed
  • Castillejo, Marta
  • Mascaraque, Arantzazu
  • N'Diaye, A. T.
  • Foerster, M.
  • Aballe, Lucía
  • Marco, J.F.
We have studied the magnetic properties and the composition of cobalt ferrite single crystal films on SrTiO3 : Nb grown by infrared pulsed-laser deposition. Mössbauer spectra have been recorded from both the target used to grow the films and the films themselves. The Mössbauer spectra of the target taken at low temperatures show a strong dependence of the recoil free fraction of the octahedral sites with temperature. The films composition, with a coexistence of Co-enriched cobalt ferrite and magnetite, has been estimated assuming a similar ratio of the recoil free fractions of the films. X-ray absorption and x-ray magnetic circular dichroism measurements confirm the valence composition of the film and show ferromagnetic Fe-Co coupling in the films with a coercive field around 0.5 T at room temperature. The combination of these characterization techniques allows establishing the coherent structural and magnetic properties of this biphase system., (MINECO) through Projects No. MAT2012 - 38045 - C04 - 01, CTQ2013 - 43086 - P, and MAT2013 - 48009 - C4 - 1 - P and by the EU - FP7 NANOPYME Project (No. 310516)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Fluence dependent electrical conductivity in aluminium thin films grown by infrared pulsed laser deposition

  • Rebollar, Esther
  • Martínez-Tong, Daniel E.
  • Sanz, Mikel
  • Oujja, Mohamed
  • Marco, J.F.
  • Ezquerra, Tiberio A.
  • Castillejo, Marta
We studied the effect of laser fluence on the morphology, composition, structure and electric conductivity of deposits generated by pulsed laser ablation of a metallic aluminium target in vacuum using a Q-switched Nd:YAG laser (1064 nm, 15 ns). Upon irradiation for one hour at a repetition rate of 10 Hz, a smooth layer of several tens of nanometres, as revealed by atomic force microscopy (AFM) was deposited on glass. Surface chemical composition was determined by X-ray photoelectron spectroscopy, and to study the conductivity of deposits both I–V curves and conductive-AFM measurements were performed. Irradiation at fluences around 2.7 J/cm resulted in deposition of amorphous aluminium oxide films. Differently, at higher fluences above 7 J/cm, the films are constituted by metallic aluminium. Optical emission spectroscopy revealed that highly ionized species are more abundant in the ablation plumes generated at higher fluences. The results demonstrate the possibility to control by PLD the metal or dielectric character of the films., This research was supported by the Spanish Ministry of Economy and Competitiveness (MINECO, projects CTQ2013-43086-P, MAT2015-66443-C2-1-R and a Ramon y Cajal contract awarded to E.R. (RYC-2011-08069)). MO thanks CSIC for a contract., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Relaxation and Conductivity in P3HT/PC71BM Blends As Revealed by Dielectric Spectroscopy

  • Cui, Jing
  • Martínez-Tong, Daniel E.
  • Sanz, Alejandro
  • Ezquerra, Tiberio A.
  • Rebollar, Esther
  • Nogales, Aurora
The conduction mechanism and the molecular dynamics on the paradigmatic bulk heterojunction formed by poly(3-hexylthiophene) (P3HT) and phenyl-C71-butyric acid methyl ester (PCBM) blends have been characterized by dielectric spectroscopy. The results show that hexyl lateral chains of the polymer exhibit a high frequency local motion, similar to a polyethylene-like relaxation. By dielectric spectroscopy the dependence with temperature of the conductivity has also been studied. The results in the low temperature region provide a method to estimate the energy offsets of the system due to the presence of the C71 derivative. In the high temperature region, the temperature dependence of the conductivity can be described by the Gaussian disorder model, and we have observed that the energetic disorder in this region does not depend upon the content of PCBM in the blends., This work has been supported by Spanish Ministry of Economy under the project MAT2014-59187-R, MAT2012-33517, and CTQ 2013-43086-P. J.C. acknowledges the China Scholarship Council for funding her research. E.R. thanks MINECO for the tenure of a Ramón y Cajal contract (No. RYC-2011-08069)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Laser-induced periodic surface structures on P3HT and on its photovoltaic blend with PC71BM

  • Cui, Jing
  • Rodríguez-Rodríguez, Álvaro
  • Hernández, Margarita
  • García-Gutiérrez, Mari Cruz
  • Nogales, Aurora
  • Castillejo, Marta
  • Moseguí González, Daniel
  • Müller-Buschbaum, P.
  • Ezquerra, Tiberio A.
  • Rebollar, Esther
8 págs.; 9 figs., We describe the conditions for optimal formation of laser-induced periodic surface structures (LIPSS) over poly(3-hexylthiophene) (P3HT) spin-coated films. Optimal LIPSS on P3HT are observed within a particular range of thicknesses and laser fluences. These conditions can be translated to the photovoltaic blend formed by the 1:1 mixture of P3HT and [6,6]-phenyl C-butyric acid methyl ester (PCBM) when deposited on an indium tin oxide (ITO) electrode coated with (poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) (PEDOT:PSS). Solar cells formed by using either a bilayer of P3HT structured by LIPSS covered by PCBM or a bulk heterojunction with a P3HT:PCBM blend structured by LIPSS exhibit generation of electrical photocurrent under light illumination. These results suggest that LIPSS could be a compatible technology with organic photovoltaic devices. Copyright © 2016 American Chemical Society, This work has been supported by Spanish Ministry of Economy under the projects CTQ 2013-43086-P, MAT2014-59187-R, and MAT2015-66443-C02-1-R. J.C. acknowledges the China Scholarship Council for funding her research (File NO. 201207040083). E.R. and A.R-R thank MINECO for the tenure of a Ramón y Cajal contract (No. RYC-2011-08069) and FPI (BES-2013-062620) contracts, respectively. P.M.-B. and D.M.G. acknowledge financial support by TUM.solar in the frame of the Bavarian Collaborative Research Project “Solar technologies go Hybrid” (SolTec), by the GreenTech Initiative (Interface Science for PhotovoltaicsISPV) of the EuroTech Universities and by the Nanosystems Initiative Munich (NIM). We thank Daniel Hermida and Wim Bras for outstanding support during beamtime in DUBBLE at ESRF. Fruitful comments of A. Urbina are gratefully acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nonlinear imaging microscopy for assessing structural and photochemical modifications upon laser removal of dammar varnish on photosensitive substrates

  • Oujja, Mohamed
  • Psilodimitrakopoulos, Sotiris
  • Carrasco, Esther
  • Sanz, Mikel
  • Philippidis, A.
  • Selimis, A.
  • Pouli, P.
  • Filippidis, G.
  • Castillejo, Marta
The nonlinear optical microscopy (NLM) modalities of Multi-Photon Excited Fluorescence (MPEF) and Third Harmonic Generation (THG) have been combined in this work to characterize as a function of depth with micrometric resolution the type and extent of morphological and photochemical modifications that take place upon ultraviolet (UV) pulsed laser removal of a dammar varnish layer applied on a photosensitive substrate. The latter consists on a layer of the synthetic polymer polymethyl methacrylate doped with a photosensitizer, the aromatic compound 1,4-di[2-(5-phenyloxazolyl)] benzene, that strongly fluoresces upon UV light illumination. A number of laser conditions for partial or total elimination of the varnish coating were explored, namely different wavelengths (266, 248 and 213 nm) and pulse durations, in the nanosecond, picosecond and femtosecond ranges. Changes in the MPEF signals upon laser ablation of the outermost varnish layer successfully signpost photochemical modifications of the varnish or of the photosensitive under-layer, and their dependence with the laser ablation parameters, i.e., wavelength and pulse duration. In turn, THG signals mark the presence of layer boundaries and the reduction by laser ablation of the thickness of the varnish coating. The obtained MPEF and THG data are complemented by morphological observation by optical microscopy and measurements of laser induced fluorescence and micro-Raman spectra of the samples before and after laser ablation at the selected laser irradiation conditions. The results acquired through these nondestructive NLM imaging techniques serve to understand the phenomena that are induced upon laser ablation and to determine the best operating conditions that ensure controlled removal of the varnish with minimal morphological and chemical modifications to the under-layers. This research is of direct application to the UV pulsed laser cleaning of paintings and demonstrates the potential of NLM as a novel assessment tool for non-destructive, on line monitoring of the laser cleaning process., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

An apparatus for quantitative high-harmonic generation spectroscopy in molecular vapours

  • McGrath, Felicity
  • Johnson, Allan S.
  • Austin, Dane R.
  • Hawkins, Peter
  • Wood, David
  • Miseikis, Lukas
  • Simpson, Emma R.
  • Castillejo, Marta
  • Torres, Ricardo
  • Parker, Susana
  • Siegel, Thomas
  • Marangos, J.P.
We present an apparatus for performing gas phase high-harmonic generation spectroscopy of molecules primarily found in the liquid phase. Liquid molecular samples are heated in a temperature controlled bath and their vapour is used to back a continuous ow gas jet, with vapour pressures of over 1 bar possible. In order to demonstrate the system, we perform high harmonic spectroscopy experiments in benzene with a 1.8 µm driving field. Using the unique capabilities of the system, we obtain spectra that are nearly free from the effects of longitudinal phase-matching, amenable to comparison with advanced numerical modelling., This work was supported by EPSRC programme Grant No. EP/I032517/1 and ERC ASTEX Project No. 290467. A.S.J. and D.A.W. also acknowledge support from Marie Curie ITN EC317232, A.S.J. acknowledges support from NSERC PGSD3-454096-2014, and D.R.A. acknowledges support from the Imperial College JRF scheme. M.C. thanks support from Project No. CTQ2013-43086-P (MINECO, Spain), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Formation of polymer nanoparticles by UV pulsed laser ablation of poly (bisphenol A carbonate) in liquid environment

  • Martínez-Tong, Daniel E.
  • Sanz, Mikel
  • Ezquerra, Tiberio A.
  • Nogales, Aurora
  • Marco, J.F.
  • Castillejo, Marta
  • Rebollar, Esther
8 pags., 9 figs. 2 tabs., Suspensions of poly(bisphenol A carbonate) (PBAC) nanoparticles of varying size and shape have been produced by ablation of a PBAC target in liquid media with the fourth harmonic of a Q-switched Nd:YAG laser (wavelength 266 nm, full width at half maximum 4 ns, repetition rate 10 Hz). The polymer target was placed at the bottom of a rotating glass vessel filled with around a 10 mm column of liquid. Laser ablation in water leads to spherical nanoparticles with diameters of several tens of nanometers for fluences close to 1 J/cm. Ablation at lower fluences, around 0.1 J/cm, results in the production of nanoparticles of smaller diameters and also of non-spherical nanoparticles. Additional irradiations at the fluence of 0.1 J/cm were performed in several liquid media with different properties, in terms of density, viscosity, thermal conductivity, boiling temperature, isothermal compressibility and polarity. The different size distributions observed were related to the thermal conductivity of the systems, while their viscosity seems to be responsible for the development of nanostructures with different morphologies., AcknowledgementsThe authors gratefully acknowledge financial support fromthe MINECO (CTQ 2013-43086-P, MAT2014-59187-R, MAT2015-66443-C02-1-R). D.E.M. thanks CSIC for the tenure of JAE-Prefellowship and Fondo Social Europeo (FSE) for cofinancing the JAEProgram. E.R. also thanks MINECO for a Ramón y Cajal contract(RYC-2011-08069)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Influence of substrate and film thickness on polymer LIPSS formation

  • Cui, Jing
  • Nogales, Aurora
  • Ezquerra, Tiberio A.
  • Rebollar, Esther
7 pags., 6 figs., 3 tabs., Here we focus on the influence of both, substrate and film thickness on polymer Laser Induced Periodic Surface Structures (LIPSS) formation in polymer films. For this aim a morphological description of ripples structures generated on spin-coated polystyrene (PS) films by a linearly polarized laser beam with a wavelength of 266 nm is presented. The influence of different parameters on the quality and characteristics of the formed laser-induced periodic surface structures (LIPSS) was investigated. We found that well-ordered LIPSS are formed either on PS films thinner than 200 nm or thicker than 400 nm supported on silicon substrates as well as on thicker free standing films. However less-ordered ripples are formed on silicon supported films with intermediate thicknesses in the range of 200–380 nm. The effect of the thermal and optical properties of the substrate on the quality of LIPSS was analyzed. Differences observed in the fluence and number of pulses needed for the onset of surface morphological modifications is explained considering two main effects which are: (1) The temperature increase on polymer surface induced by the action of cumulative laser irradiation and (2) The differences in thermal conductivity between the polymer and the substrate which strongly affect the heat dissipation generated by irradiation., This work has been supported by Spanish Ministry of Economy and Competitiveness (MINECO) through projects CTQ2013-43086-P, MAT2014-59187-R, and MAT2015-66443-C02-1-R. J.C acknowledges the China Scholarship Council for funding her research (File NO. 201207040083). E.R. also thanks MINECO for a Ramón y Cajal contract (RYC-2011-08069)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Quantitative Nanomechanical Properties of Multilayer Films Made of Polysaccharides through Spray Assisted Layer-by-Layer Assembly

  • Criado-González, Miryam
  • Rebollar, Esther
  • Nogales, Aurora
  • Ezquerra, Tiberio A.
  • Boulmedais, F.
  • Mijangos, Carmen
  • Hernández, Rebeca
9 pags., 8 figs., 2 tabs., Nanomechanical properties of alginate/chitosan (Alg/Chi) multilayer films, obtained through spray assisted layer-by-layer assembly, were studied by means of PeakForce quantitative nanomechanical mapping atomic force microscopy (PF-QNM AFM). Prepared at two different alginate concentrations (1.0 and 2.5 mg/mL) and a fixed chitosan concentration (1.0 mg/mL), Alg/Chi films have an exponential growth in thickness with a transition to a linear growth toward a plateau by increasing the number of deposited bilayers. Height, elastic modulus, deformation, and adhesion maps were simultaneously recorded depending on the number of deposited bilayers. The elastic modulus of Alg/Chi films was found to be related to the mechanism of growth in contrast to the adhesion and deformation. A comparison of the nanomechanical properties obtained for non-cross-linked and thermally cross-linked Alg/Chi films revealed an increase of the elastic modulus after cross-linking regardless alginate concentration. The incorporation of iron oxide nanoparticles (NPs), during the spray preparation of the films, gave rise to nanocomposite Alg/Chi films with increased elastic moduli with the number of incorporated NPs layers. Deformation maps of the films strongly suggested the presence of empty spaces associated with the method of preparation. Finally, adhesion measurements point out to a significant role of NPs on the increase of the adhesion values found for nanocomposite films., Financial support from MINECO (MAT2014-53437-C2-1-P, MAT2014-59187-R MAT2015-66443-C02-1-R and CTQ2013- 43086-P) is gratefully acknowledged. Rebeca Hernández and Esther Rebollar thank MEC for a Ramón y Cajal contract. Miryam Criado thanks MEC for a FPU fellowship and Técnicas Reunidas S.A. for financial support in Residencia de estudiantes., Peer reviewed, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Chain orientation in bulk heterojunction photovoltaic thin films as revealed by Near Edge X-Ray Absorption Fine Structure

  • Gutiérrez-Fernández, Edgar
  • Rodríguez-Rodríguez, Álvaro
  • Ezquerra, Tiberio A.
  • Rebollar, Esther
  • Valvidares, M.
  • Garciani, P.
  • García-Gutiérrez, Mari Cruz
Madrid from October 9-11, 2017. -- https://w3.ual.es/Congresos/AUSE/CONGRESO2017/index_congreso.html, This work has been supported by MINECO (Projects: MAT2014-59187-R, MAT2015-66443-C02-1-R, CTQ 2013- 43086-P)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Unconventional properties of nanometric FeO(111) films on Ru(0001): Stoichiometry and surface structure

  • Martín-García, Laura
  • Bernal-Villamil, Iván
  • Oujja, Mohamed
  • Carrasco, Esther
  • Gargallo-Caballero, R.
  • Castillejo, Marta
  • Marco, J.F.
  • Gallego, Silvia
  • de la Figuera, Juan
We report on the growth of high quality monocrystalline and stoichiometric FeO(111) films on Ru(0001) by infrared pulsed laser deposition (IR-PLD), in a thickness range from below 1 nm to above 8 nm. The films are characterized by low-energy electron diffraction (LEED), X-ray photoelectron spectroscopy (XPS) and ion scattering spectroscopy (ISS). Besides the 1 : 1 Fe/O ratio, they show some unexpected properties, such as the lack of Fe sites at the surface, the (1 × 1) surface symmetry and the large lattice expansion. First-principles calculations show that these properties can be understood from the existence of a wurtzite-like environment at the surface region that preserves the bulk-like antiferromagnetism. This extends the validity of stacking-faults as efficient mechanisms to compensate surface polarity, and suggests that surface-induced processes can be tailored to design nanoscaled materials beyond the parent bulk phase diagram.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of wavelength, deposition temperature and substrate type on cobalt ferrite thin films grown by pulsed laser deposition

  • Oujja, Mohamed
  • Martín-García, Laura
  • Rebollar, Esther
  • Quesada, Adrián
  • García García-Tuñón, Miguel Ángel
  • Fernández Lozano, José Francisco
  • Marco, J.F.
  • de la Figuera, Juan
  • Castillejo, Marta
  • AMPHIBIAN Project ID:720853
In pulsed laser deposition, the laser irradiation wavelength and the substrate nature and temperature crucially affect the composition, crystallinity, structure and magnetic properties of the grown deposits. In this work, cobalt ferrite (CoFeO) thin films were deposited on Si (1 0 0) and SrTiO (1 0 0) single crystal substrates at room temperature and 770 K using laser wavelengths of 213, 532 and 1064 nm. The deposited films were characterized by atomic force microscopy to determine the surface morphology, by X-ray diffraction to examine their crystallinity, and by micro-Raman, scanning electron microscopy/energy-dispersive X-ray spectroscopy, X-ray photoelectron and Mössbauer spectroscopies to investigate their composition and stoichiometry. Magnetic characterization was carried out by superconducting quantum interference device magnetometry. At 770 K and 1064 nm, the films consisted of single-crystal CoFeO ((1 0 0) orientation) when grown on SrTiO, and of polycrystalline CoFeO when grown on Si. The composition of the films became more complex at shorter wavelengths as they contained magnetite and other minority phases in different concentrations. The crystalline quality of the films also decreased with decreasing wavelength even including superparamagnetic species. In general, for the same wavelength, the deposits obtained at room temperature were less crystalline than those produced with the substrate heated at 770 K., This research was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) through Projects CTQ2016-75880-P, CTQ2013-43086-P and MAT2015-64110-C2-1-P. M. O. and E. R. thank CSIC and RYC-2011-08069 (Ramón y Cajal Programme) for contracts. We thank CSIC Intramural Project PIE 201560E068 and financial support from the European Commission through the project NANOPYME FP7-NMP-2012-SMALL-6 NANOPYME (n° 310516) and AMPHIBIAN H2020-NMBP-2016-720853. W, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Nonlinear optics in laser ablation plasmas

  • Oujja, Mohamed
  • Sanz, Mikel
  • de Nalda, R.
  • Castillejo, Marta
Chapter 13, 25 pages, 12 figures, This chapter describes current research on the nonlinear optical response, specifically low-order harmonic generation, of nanosecond laser ablation plumes of solid targets. The spatiotemporal control of the driving laser with respect to the position and time of the ablation event allows for the differentiation of distinct populations of species and enables the in situ diagnosis of complex ablation plume environments., The authors thank funding from the Spanish Ministerio de Economía, Industria y Competitividad (Projects CTQ2013-43086-P and CTQ2016-75880-P). M.O. thanks CSIC for a contract., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Mössbauer and magnetic properties of coherently mixed magnetite-cobalt ferrite grown by infrared pulsed-laser deposition

  • Figuera, Juan de la|||0000-0002-7014-4777
  • Quesada, Adrian
  • Martín García, Laura|||0000-0001-5743-4473
  • Sanz, Mikel
  • Oujja, Mohamed|||0000-0003-3757-4043
  • Castillejo, Marta
  • Mascaraque, Arantzazu
  • N'Diaye, Alpha T.|||0000-0001-9429-9776
  • Foerster, Michael|||0000-0002-4147-6668
  • Aballe, Lucía|||0000-0003-1810-8768
  • Marco, José F.
We have studied the magnetic properties and the composition of cobalt ferrite single crystal films on SrTiO: Nb grown by infrared pulsed-laser deposition. Mössbauer spectra have been recorded from both the target used to grow the films and the films themselves. The Mössbauer spectra of the target taken at low temperatures show a strong dependence of the recoil free fraction of the octahedral sites with temperature. The films composition, with a coexistence of Co-enriched cobalt ferrite and magnetite, has been estimated assuming a similar ratio of the recoil free fractions of the films. X-ray absorption and x-ray magnetic circular dichroism measurements confirm the valence composition of the film and show ferromagnetic Fe-Co coupling in the films with a coercive field around 0.5 T at room temperature. The combination of these characterization techniques allows establishing the coherent structural and magnetic properties of this biphase system.