Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 20
Encontrada(s) 1 página(s)

e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Tesis doctoral (DoctoralThesis)

Desarrollo de una celda electroquímica en gel para la evaluación in situ del patrimonio cultural metálico

  • Ramírez Barat, Blanca
A lo largo de toda la historia, la humanidad ha tratado de preservar ciertos objetos que por diversos motivos han adquirido un valor y un significado para la sociedad que los ha poseído, constituyendo su patrimonio cultural. En ese esfuerzo por preservar el pasado para las generaciones presentes y futuras, la investigación científica ha ido adquiriendo una relevancia progresiva. La ciencia de la conservación trata de comprender los problemas y aportar soluciones para la conservación del patrimonio, tanto desde el punto de vista tecnológico como estratégico o de sostenibilidad. El adecuado diseño y planificación de las estrategias de conservación de los objetos y colecciones del patrimonio cultural son fundamentales, y deben tener en cuenta las limitaciones tecnológicas y de recursos. El fin de esta tesis ha sido contribuir desde la Ciencia e Ingeniería de Materiales a este objetivo, concretamente en el ámbito del patrimonio cultural metálico, desarrollando una herramienta de diagnóstico del estado de conservación y de los sistemas de protección para este tipo de bienes culturales. El principal problema para la conservación del patrimonio metálico es la corrosión, que tiene lugar por interacción entre el objeto metálico y el medio que lo rodea. Para enfrentarse a este problema, los conservadores de patrimonio metálico cuentan con dos estrategias: el control de las condiciones ambientales –lo que no siempre es posible- o el empleo de recubrimientos protectores, que lo aíslen del medio, que es el método más habitual en la práctica de la conservación. Sin embargo, cualquier método presenta limitaciones, por lo que resulta de gran relevancia el poder evaluar la eficacia y la duración de los sistemas empleados, antes de que aparezcan efectos negativos en el objeto. Así, los recubrimientos habituales en conservación –principalmente ceras y barnices acrílicos- tienen una capacidad protectora bastante limitada y deben ser renovados cada cierto tiempo. Esto conlleva la necesidad de conocer y evaluar el comportamiento de los sistemas aplicados, con especial hincapié en su durabilidad. La espectroscopía de impedancia electroquímica (EIS) es una técnica electroquímica que permite estudiar los procesos de corrosión en los metales en diferentes medios y evaluar la capacidad protectora de los recubrimientos, por lo que a priori resulta una técnica idónea para este propósito. Sin embargo, la aplicación de la EIS a la conservación del patrimonio cultural metálico no es una práctica generalizada, por las dificultades particulares que presenta su aplicación en este campo. Las características propias de los bienes culturales, hacen que en muchos casos los estudios de laboratorio no sean suficientes, y que el objeto no se pueda trasladar, por lo que resulta imprescindible la realización de medidas in situ, directamente sobre la superficie del objeto a conservar. La aplicación de técnicas electroquímicas requiere montar una celda electroquímica, en la que poner en contacto la superficie del material que se va a estudiar con un electrólito líquido y los electrodos auxiliares (electrodo de referencia y contraelectrodo). Esta tarea resulta compleja en el caso de superficies irregulares y no horizontales como las de una escultura. Para dar una solución a este problema, el objetivo de esta tesis ha sido el desarrollo de una celda electroquímica con un electrólito en gel, específicamente diseñada para la realización de medidas in situ sobre patrimonio cultural. Para el diseño se han tenido en cuenta diversos factores relacionados con este tipo de medidas, tales como la forma y tamaño de la celda para facilitar su colocación en la superficie de la obra, la naturaleza, geometría y posición de los electrodos para obtener una señal de calidad, o el tipo de soporte adecuado para lograr una buena estabilidad mecánica. El trabajo se ha estructurado en varios apartados, si bien no recorrido su no ha sido lineal, ya que los avances y dificultades en cada uno de los aspectos o subapartados han contribuido al desarrollo de los demás. El primer paso ha sido comprobar la posibilidad de realizar medidas de impedancia utilizando un electrólito gelificado con agar, abordando cuestiones como la validez, reproducibilidad o repetividad de los resultados. Una vez verificada la obtención de medidas de calidad y comparables a las de un electrólito tradicional, se ha estudiado en mayor detalle la contribución del agar en las medidas, para establecer la concentración más adecuada tanto desde el punto de vista electroquímico como mecánico. En esta misma línea, se ha comparado el comportamiento del agar y de la agarosa, uno de los dos polisacáridos que componen este material, y que es el responsable de las propiedades gelificantes. El siguiente paso ha sido analizar en detalle el comportamiento del sistema completo, incluyendo los electrodos (de referencia y contraelectrodo) para optimizar el diseño. Así, se han estudiado diferentes configuraciones de celda con electrodos de distinta naturaleza y geometría, un factor que ha demostrado su relevancia para minimizar la aparición de artefactos en las medidas al emplearse electrólitos de baja conductividad. En paralelo al desarrollo y estudio de la celda, se han realizado medidas sobre diferentes sustratos para evaluar la aplicabilidad del sistema desarrollado a la resolución de problemas de conservación. Por un lado, se han realizado ensayos de laboratorio sobre probetas de bronce y acero patinable con diversas pátinas y recubrimientos, simulando cuestiones que se abordan habitualmente en la conservación del patrimonio metálico; por otro lado, se han realizado estudios in situ, sobre obra real (principalmente escultura moderna y contemporánea del Museo Arqueológico Nacional, Museo de Escultura de Leganés y colección de escultura del campus de la Universidad Politécnica de Valencia), para comprobar y validar el diseño de la celda en su modo de aplicación final, e ir introduciendo las modificaciones necesarias para solventar las dificultades prácticas que se iban encontrando en diferentes situaciones. Todo ello ha permitido concluir con éxito con el diseño de una celda electroquímica con electrólito en gel, adecuada para la realización de medidas electroquímicas in situ sobre el patrimonio cultural metálico, aportando una nueva herramienta para avanzar en la conservación de este tipo de patrimonio., Along history, mankind has sought to preserve certain objects which, for multiple reasons, have acquired a special value and a meaning for the society that owned them, constituting their cultural heritage. In this effort to preserve the past for the present and future generations, scientific research has gained an increasing relevance. Conservation science aims at understanding problems and provide solutions for the conservation of heritage, both from the technological and sustainable point of view. The proper design and planning of strategies for the conservation of cultural heritage objects and collections is essential, and should take into account both technological and resources limitations. The purpose of this thesis is to contribute through Materials Science and Engineering to this objective, in particular in the field of metallic cultural heritage, developing a tool of diagnosis of the state of conservation and evaluation of protection systems for this type of heritage. The main challenge for the conservation of the heritage metal is corrosion, which takes place because of the interaction between the metal object and its environment. To deal with this problem, metal conservators have two strategies: control of environmental conditions - which is not always possible - or the use of protective coatings to isolate the metal object from the environment, which is the most frequent solution in conservation practice. Nonetheless, any method has certain limitations. For this reason, it is of great importance being able to evaluate the effectiveness and lifespan of protective systems before damage occurs. Common coatings in heritage conservation –mainly waxes and acrylic varnishes- have a quite limited protective ability, and have to be renewed periodically. This entails the need of knowing and evaluating the behavior of applied protective coatings, with particular focus on durability. Electrochemical impedance spectroscopy (EIS) is an electrochemical technique that allows to investigate corrosion mechanisms of metals in different environments and to evaluate the protective properties of coatings. This makes EIS the ideal technique for this purpose. Unfortunately, the use of EIS in metal cultural heritage is not a widespread practice, due to the particular difficulties in applying this technique in heritage objects. The special characteristics of cultural heritage assets make it necessary to carry out on site measurements, directly on the surface of the object to preserve. The use of electrochemical techniques requires mounting an electrochemical cell, in which the surface of the material under study is placed in contact with a liquid electrolyte and the auxiliary electrodes (reference and counter electrode). This is not an easy task for irregular and non-horizontal surfaces as in a sculpture. To overcome this challenge, the objective of this thesis is to develop an electrochemical cell with a gelled electrolyte, specifically designed for conducting in situ electrochemical measurements on cultural heritage. The design has taken into account various factors related to this type of measures, such as the shape and size of the cell to be placed on the surface of the object, the nature, geometry and position of the electrodes to obtain a quality signal, or the fixing system to ensure a good mechanical stability. This work has been structured into several sections, although its progress has not been linear in time, since the advances and difficulties in each of the aspects or subsections have contributed to improve and develop the others. The first step has been checking the possibility of performing impedance measures using an agar gelled electrolyte, addressing issues such as validity, reproducibility, or repeatability of the results. Once verified the quality of measurements, comparable to a traditional electrolyte, detail the contribution of the agar been studied in greater detail, to establish the most appropriate concentration both from the electrochemical and mechanical point of view. With the same purpose the behavior of agar and agarose has been compared. The next step was to analyze in detail the behavior of the entire system, including electrodes (reference and counter electrode) to optimize the design. Thus, we have studied different configurations of cell with electrodes of different nature and geometry, a factor that has shown its relevance to minimize the appearance of artifacts in the measurements when using low-conductivity electrolytes. In parallel to the development and study of the cell, measurements on different substrates have been performed to assess the applicability of the developed system to solve conservation problems. On the one hand, laboratory tests on bronze and weathering steel coupons, with different patinas and coatings were performed, simulating issues usually addressed in metallic heritage conservation; on the other hand, studies have been conducted in situ on real work (mainly modern and contemporary sculpture of the National Archaeological Museum, Museum of Sculpture in Leganes and the sculpture collection at the Polytechnic University of Valencia campus), to check and validate the design of the cell in its final application mode, and to introduce the modifications necessary to solve the practical difficulties that were found in different situations. This has allowed concluding successfully with the design of an electrochemical cell with a gel electrolyte, suitable for carrying out on-site electrochemical measures on metallic cultural heritage, providing a new tool for a better conservation of this kind of heritage., El trabajo que aquí se presenta ha sido financiado por la beca FPI BES-2012-052716 y el proyecto HAR2011-22402 del Plan Nacional de I+D+i 2008-2011 del Ministerio de Ciencia e Innovación, el proyecto HAR2014-54893-R, HAR2014-54893-R, la Comunidad de Madrid y el fondo Social Europeo en el marco del Programa Geomateriales 2 (S2013/MIT 2914), y el proyecto IPERION-CH (European Union H2020, G.A. 654028)., Programa de Doctorado en Ciencia e Ingeniería de Materiales por la Universidad Carlos III de Madrid, Presidente: Juan Carlos Galván Sierra.- Secretario: Antonia Jiménez Morales.- Vocal: Kepa Castro Ortiz de Pinedo
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Technical study of Germolles’ wall paintings: the input of imaging technique, Estudio técnico de las pinturas murales de Germolles: la contribución de las técnicas de imagen

  • Degrigny, Christian
  • Piqué, Francesca
  • Papiashvili, Nutsa
  • Guery, Julien
  • Mansouri, Alamin
  • Le Goïc, Gaëtan
  • Detalle, Vincent
  • Martos-Levif, Dominique
  • Mounier, Aurélie
  • Wefers, Stefanie
  • Tedeschi, Cristina
  • Cucchi, Marco
  • Vallet, Jean-Marc
  • Pamart, Anthony
  • Pinette, Matthieu
[EN] The Château de Germolles is one of the rare palace in France dating from the 14th century. The noble floor is decorated with wall paintings that are a unique example of courtly love spirit that infused the princely courts of the time. After being concealed sometime in the 19th century, the paintings were rediscovered and uncovered in the middle of the 20th century and partly restored at the end of the 1990s. No scientific documentation accompanied these interventions and important questions, such as the level of authenticity of the mural decorations and the original painting technique(s) used in the medieval times remained unanswered. The combined scientific and financial supports of COSCH Cost Action and DRAC-Burgundy enabled to study Germolles’ wall paintings using some of the most innovative imaging and analytical techniques and to address some of the questions raised. The study provided significant information on the material used in the medieval times and on the conservation condition of the paintings. The data collected is vast and varied and exposed the owners of the property to the challenges of data management., [ES] El castillo de Germolles es uno de los raros palacios principescos en Francia que data del siglo XIV. La planta noble está decorada con pinturas murales que son un ejemplo único del amor cortés, ese espíritu que se divulgó en las cortes de la época.Ocultadas desde el fin del siglo XIX, las pinturas fueron descubiertas en la mitad del siglo XXy fueron parcialmente restauradas al finalde la década de 1990. No hay documentación científica queacompañelas intervenciones, y cuestiones importantesse quedaronsin repuesta, en particular el nivel de autenticidad de las decoraciones de las paredes, así como lastécnicaspictóricasutilizadasen laépoca medieval. El apoyo científico y económico de la Acción Cost COSCH y de la DRAC de Borgoña permitió elestudio delas pinturas murales de Germolles con algunas de las técnicas de imagen y analíticasmás innovadoras, con tal de responder a algunas de las cuestiones planteadas. El estudio proporcionó informaciónrelevante en lo que se refiere al material utilizado durante la Edad Mediay sobreel estado de conservación de las pinturas. La toma de datos es ampliay variada, y expuso a los dueños de la propiedad al desafío de la gestión de datos., This project would not have been possible without the financial support by DRAC-Burgundy and the COST Action TD1201: Colour and Space in Cultural Heritage (COSCH) (www.cosch.info) which the authors wish to sincerely thank.
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

In-depth evaluation of a ZrO2 promoted CaO-based CO2 sorbent in fluidized bed reactor tests

  • Antzara, Andy N.
  • Arregi Joaristi, Aitor
  • Heracleous, Eleni
  • Lemonidou, Angeliki A.
Carbonate looping, based on the reversible gas-solid reaction of CaO with CO2, is considered as a promising alternative to amine scrubbing for post-combustion CO2 capture. Solid sorbents suffer however from degradation, mainly due to thermal sintering and elutriation of fine particles due to enhanced attrition rates in fluidized-bed reactors. In this work, a previously developed synthetic Zr-promoted CaO-based CO2 sorbent was tested in a fluidized bed reactor unit to determine its performance in cyclic CO2 capture over various operating conditions, relevant to industrial application. The material exhibited very high carbonation conversion (60-85%) during pre-breakthrough under all investigated conditions, with more than 75% CO2 removal. The addition of steam in both the carbonation and calcination steps resulted, not only in higher conversions, but also in significantly enhanced cyclic stability. Deactivation was less than 16% after 20 consecutive cycles. The performance of the sorbent was further tested under lower temperature difference between carbonation (680°C) and calcination (750°C), a scheme more favourable for utilizing the heat generated by the highly exothermic carbonation reaction for the thermal demands of the calciner in the actual process. The material displayed similar carbonation conversion, but inferior performance in terms of stability. Advanced post-reaction characterization with in-situ XRD revealed that even though the sintering effect was more limited due to the lower calcination temperature, calcination of CaCO3 was incomplete, rendering a small fraction of the sorbent inactive for CO2 capture. Under severe calcination conditions (920°C and 80 vol.% CO2 concentration) the sorbent maintained more than 70% of its initial sorption capacity (7.1 moles of CO2/kg of sorbent after 20 cycles), a value more than 5 times higher compared to natural limestone., We acknowledge the financial support from European Union- European Regional Development Fund and Ministry of Development, ESPA 2007–2013/EPAN II programme, Action Synergasia11’. Financial support by the Access to Research Infrastructures activity in the Horizon 2020 Programme of the EU (ECCSEL INFRADEV-3 Grant Agreement N. 654028) is also gratefully acknowledged for the access in the In-situ characterization lab in Stiftelsen SINTEF (Oslo, Norway). Dr Aitor Arregi acknowledges the University of the Basque Country UPV/EHU for his grant (MOV15/06).
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Micro-PIXE studies on prehistoric chert tools: elemental mapping to determine Palaeolithic lithic procurement

  • Sánchez de la Torre, Marta
  • Angyal, Anikó
  • Kertész, Zsófia
  • Dubernet, Stéphan
  • Le Bourdonnec, Francois-Xavier
  • Papp, Enikő
  • Szoboszlai, Zoltán
  • Török, Zsófia
  • Csepregi, Ákos
  • Szikszai, Zita
This paper contributes to an understanding of the distances and choices involved in raw material procurement strategies by Upper Palaeolithic communities through a Pyrenean geoarchaeological case study. Methodologically it involved using Particle Induced X-ray Emission (PIXE) with a focused proton beam to determine the concentration and distribution of elements in geological samples from three natural primary outcrops belonging to two geological formations outcropping in the French side of the Pyrenees. While it was not possible to distinguish the formation through reference to major and minor elements, some variations were revealed at the trace elemental level. With the aim to determine if these elements were associated with the Si matrix or to a specific inclusion, elemental maps were acquired and the elemental composition of the identified inclusions were also determined. These chemical signatures were then compared to those generated from archaeological artefacts from sites in northern Spain as a means of reconstructing the catchment areas used by prehistoric groups for their chert procurement. The results indicate the existence of trans-Pyrenean long distance procurement strategies during the Magdalenian (13700 to the 18800 cal BP).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Evaluation of laser cleaning for the restoration of tarnished silver artifacts

  • Palomar Sanz, Teresa
  • Oujja, Mohamed
  • Llorente, Irene
  • Ramírez Barat, Blanca
  • Cañamares, María Vega
  • Castillejo, Marta
In this study we evaluate the laser cleaning of tarnished pure and sterling silver substrates using a nanosecond Q-switched Nd:YAG laser at 1064, 532 and 266 nm. To assess the effects associated with cyclic laser cleaning treatments, several cycles of tarnishing followed by laser cleaning were applied on silver coupons that were characterized by gravimetry, colorimetry, scanning electron microscopy, X-ray photoelectron spectroscopy and micro-Raman spectroscopy. According to the obtained results, none of the three wavelengths is recommended for laser cleaning of pure silver objects, while for sterling silver artifacts, the visible laser wavelength of 532 nm seems the most appropriate., This work has been funded by project CREMEL (Ref. HAR2011-22402), by a pre-doctoral FPI grant (BES-2012-052716) from the Spanish Ministry of Economy and Competitiveness (MINECO), by program GEOMATERIALES 2-CM (Ref. CAM, S2013/MIT_2914) from the Community of Madrid, and by EU project “Integrated Platform for the European Research Infrastructure on Cultural Heritage” (IPERION-CH, Ref. H2020-INFRAIA-2014-2015, grant n° 654028)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Influence of wavelength on the laser removal of lichens colonizing heritage stone

  • Sanz, Mikel
  • Oujja, Mohamed
  • Ascaso, Carmen
  • Pérez-Ortega, Sergio
  • Souza-Egipsy, Virginia
  • Fort González, Rafael
  • Ríos, Asunción de los
  • Wierzchos, Jacek
  • Cañamares, María Vega
  • Castillejo, Marta
Laser irradiation of lichen thalli on heritage stones serves for the control of epilithic and endolithic biolog- ical colonizations. In this work we investigate rock samples from two quarries traditionally used as source of monumental stone, sandstone from Valonsadero (Soria, Spain) and granite from Alpedrete (Madrid, Spain), in order to find conditions for efficient laser removal of lichen thalli that ensure preservation of the lithic substrate. The samples presented superficial areas colonized by different types of crustose lichens, i.e. Candelariella vitellina, Aspicilia viridescens, Rhizocarpon disporum and Protoparmeliopsis muralis in Valonsadero samples and P. cf. bolcana and A. cf. contorta in Alpedrete samples. A comparative laser cleaning study was carried out on the mentioned samples with ns Q-switched Nd:YAG laser pulses of 1064 nm (fundamental radiation), 355 nm (3rd harmonic) and 266 nm (4th harmonic) and sequences of IR-UV pulses. A number of techniques such as UV-Vis absorption spectroscopy, stereomicroscopy, scan- ning electron microscopy (SEM) at low vacuum, SEM with backscattered electron imaging (SEM-BSE), electron dispersive spectroscopy (EDS) and FT-Raman spectroscopy were employed to determine the best laser irradiation conditions and to detect possible structural, morphological and chemical changes on the irradiated surfaces. The results show that the laser treatment does not lead to the complete removal of the studied lichen thalli, although clearly induces substantial damage, in the form of loss of the lichen upper cortex and damage to the algal layer. In the medium term these alterations could result in the destruction of the lichen thalli, thus providing a degree of control of the biodeterioration processes of the lithic substrate and reducing the chances of subsequent lichen recolonization., The present work was supported by programs Geomateriales 2 (S2013/MIT-2914) financed by Comunidad de Madrid and Structural Funds (FSE and FEDER) and IPERION-CH Ref. H2020-INFRAIA-2014-2015, no. 654028. MO thanks CSIC for contract. SPO is supported by the Spanish Ministry of Economy and Competitiveness (MINECO) grant RYC-2014-16784. We are grateful to M. Furio, A. Jorge and L. Tormo from Servicio de Microscopía, MNCN-CSIC., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Active conservation of ceramic building materials: removal of lichens on roof tiles by laser and biocides treatments

  • Peña Poza, Javier
  • Pérez-Ortega, Sergio
  • Sanz, Mikel
  • Oujja, Mohamed
  • Ascaso, Carmen
  • Wierzchos, Jacek
  • Ríos, Asunción de los
  • Urizal, M.
  • Cañamares, María Vega
  • Castillejo, Marta
  • Souza-Egipsy, Virginia
  • García Heras, Manuel
  • Villegas Broncano, María Ángeles
Esta comunicación participó en el: 5th International Conference YOuth in COnservation of CUltural Heritage YOCOCU 2016 21st-23rd September 2016 Madrid, Very recently, in monumental cities, certain conservational practices tend to use ancient/traditional roof tiles in the restoration of Heritage buildings. Numerous studies have been undertaken to remove lichens on stones. However, little has been done to date to study lichens removal from ceramic materials, despite the fact that they are commonly colonized by different lichen communities. The main goal of this contribution is making a diagnosis of alterations that lichens may cause in ceramic materials, as well as to determine the possibilities of removal by treatments based on laser irradiation and use of biocides., Geomateriales 2 (Ref. S2013/MIT-2914, Regional Government of Madrid and EU structural funds) and IPERION-CH (Integrated Platform for the European Research Infrastructure on Cultural Heritage (Ref. H2020-INFRAIA-2014-2015 nº 654028)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nonlinear imaging microscopy for assessing structural and photochemical modifications upon laser removal of dammar varnish on photosensitive substrates

  • Oujja, Mohamed
  • Psilodimitrakopoulos, Sotiris
  • Carrasco, Esther
  • Sanz, Mikel
  • Philippidis, A.
  • Selimis, A.
  • Pouli, P.
  • Filippidis, G.
  • Castillejo, Marta
The nonlinear optical microscopy (NLM) modalities of Multi-Photon Excited Fluorescence (MPEF) and Third Harmonic Generation (THG) have been combined in this work to characterize as a function of depth with micrometric resolution the type and extent of morphological and photochemical modifications that take place upon ultraviolet (UV) pulsed laser removal of a dammar varnish layer applied on a photosensitive substrate. The latter consists on a layer of the synthetic polymer polymethyl methacrylate doped with a photosensitizer, the aromatic compound 1,4-di[2-(5-phenyloxazolyl)] benzene, that strongly fluoresces upon UV light illumination. A number of laser conditions for partial or total elimination of the varnish coating were explored, namely different wavelengths (266, 248 and 213 nm) and pulse durations, in the nanosecond, picosecond and femtosecond ranges. Changes in the MPEF signals upon laser ablation of the outermost varnish layer successfully signpost photochemical modifications of the varnish or of the photosensitive under-layer, and their dependence with the laser ablation parameters, i.e., wavelength and pulse duration. In turn, THG signals mark the presence of layer boundaries and the reduction by laser ablation of the thickness of the varnish coating. The obtained MPEF and THG data are complemented by morphological observation by optical microscopy and measurements of laser induced fluorescence and micro-Raman spectra of the samples before and after laser ablation at the selected laser irradiation conditions. The results acquired through these nondestructive NLM imaging techniques serve to understand the phenomena that are induced upon laser ablation and to determine the best operating conditions that ensure controlled removal of the varnish with minimal morphological and chemical modifications to the under-layers. This research is of direct application to the UV pulsed laser cleaning of paintings and demonstrates the potential of NLM as a novel assessment tool for non-destructive, on line monitoring of the laser cleaning process., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of biological colonization on ceramic roofing tiles by lichens and a combined laser and biocide procedure for its removal

  • Peña Poza, Javier
  • Ascaso, Carmen
  • Sanz, Mikel
  • Pérez-Ortega, Sergio
  • Oujja, Mohamed
  • Wierzchos, Jacek
  • Souza-Egipsy, Virginia
  • Cañamares, María Vega
  • Urizal, M.
  • Castillejo, Marta
  • García Heras, Manuel
Biodeterioration damage is an important issue in conservation and restoration of built heritage, especially when ceramic materials are used. Biological colonization of ceramic roofing tiles by lichens is a common phenomenon. However, there are no reports to date of lichens removal from unglazed roofing tiles for conservation purposes. This paper for the first time reveals the results of a combined procedure undertaken to assess the removal of lichens on different kinds of unglazed ceramic roofing tiles by treatments based on both dual sequential laser irradiation and treatment using Acticide CF biocide. Three species of lichens were identified: Verrucaria nigrescens, Calogaya decipiens and Pyrenodesmia teicholyta. The chemical and mineralogical composition of roofing tiles were characterized by X-ray fluorescence (XRF) spectrometry, optical polarized petrographic microscopy, and X-ray diffraction (XRD). Laser irradiation was accomplished by applying sequences of nanosecond laser pulses at two wavelengths (1064 and 266 nm). After dual sequential laser irradiation a biocide was applied. To assess the combined effect of both treatments several techniques were used, including stereo and fluorescence (FM) microscopies, scanning (SEM) and transmission (TEM) electron microscopies, and FT-Raman spectroscopy. Chemical composition of the analyzed roofing tiles was shown as a relevant factor regarding the degree of interaction between the biological colonization and the substrate, and hence, the bioweathering effect. The combined procedure has proved to be very effective in ablating cortical layers in all species, or even complete areolae in V. nigrescens, enhancing biocide effect in the thalli of C. decipiens and P. teicholyta, and producing the complete damage of both bionts., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

X-ray and ion irradiation effects on azurite, malachite and alizarin pictorial models

  • Carrasco, Esther
  • Oujja, Mohamed
  • Sanz, Mikel
  • Marco, J.F.
  • Castillejo, Marta
The analysis by intense radiation sources of painting materials used in artworks gives valuable information about their composition and state of conservation, but it can also induce undesired modifications on the studied substrates. Here we use X-ray photoelectron spectroscopy (XPS) to follow the surface chemical changes that prolonged irradiation with soft X-rays (with maximum doses ranging from ~ 1.2x1017 to ~ 3.4x1017 photons cm-2) produce on azurite, malachite and alizarin pigments and on two egg-yolk temperas containing azurite or alizarin. The effects following exposure to Argon ion irradiation have been also studied for malachite and azurite tempera. XPS spectra of the samples show that both types of radiation induce similar superficial alterations, although, at the selected experimental conditions, the modification rate is slower for exposure to soft X-rays. The highest radiation stability is shown for alizarin and, on the contrary, azurite and malachite experience a progressive chemical reduction of Cu2+ to Cu+. The reduction of copper takes also place in the azurite tempera, while the proteins and lipids of the egg-yolk binder of azurite and alizarin temperas are subjected to degradation by irradiation with photons and ions. By employing XPS, the cleavage of C-N, C-O(H) and C=O bonds has been identified in the egg-yolk temperas., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Multianalytical non-invasive characterization of phthalocyanine acrylic paints through spectroscopic and non-linear optical techniques

  • Fovo, A.D.
  • Oujja, Mohamed
  • Sanz, Mikel
  • Martínez-Hernández, A.
  • Cañamares, María Vega
  • Castillejo, Marta
  • Fontana, R.
The documentation and monitoring of cleaning operations on paintings benefit from the identification and determination of thickness of the materials to be selectively removed. Since in artworks diagnosis the preservation of the object's integrity is a priority, the application of non-invasive techniques is commonly preferred. In this work, we present the results obtained with a set of non-invasive optical techniques for the chemical and physical characterization of six copper-phthalocyanine (Cu-Pc) acrylic paints. Cu-Pc pigments have been extensively used by artists over the past century, thanks to their properties and low cost of manufacture. They can also be found in historical paintings in the form of overpaints/retouchings, providing evidence of recent conservation treatments. The optical behaviour and the chemical composition of Cu-Pc paints were investigated through a multi-analytical approach involving micro-Raman spectroscopy, Fibre Optics Reflectance Spectroscopy (FORS) and Laser Induced Fluorescence (LIF), enabling the differentiation among pigments and highlighting discrepancies with the composition declared by the manufacturer. The applicability of Non Linear Optical Microscopy (NLOM) for the evaluation of paint layer thickness was assessed using the modality of Multi-photon Excitation Fluorescence (MPEF). Thickness values measured with MPEF were compared with those retrieved through Optical Coherence Tomography (OCT), showing significant consistency and paving the way for further non-linear stratigraphic investigations on painting materials., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Analysis of chromophores in stained-glass windows using Visible Hyperspectral Imaging in-situ

  • Palomar Sanz, Teresa
  • Grazia, Chiara
  • Pombo Cardoso, Isabel
  • Vilarigues, Márcia
  • Miliani, Costanza
  • Romani, Aldo
This work presents the implementation of Visible Hyperspectral Imaging for the in-situ analysis of glass chromophores in two glass windows from the Casa-Museu Dr. Anastácio Gonçalves (Lisbon, Portugal). The measurements were taken inside the building using natural sunlight as the illumination source. In addition, advantages and disadvantages of the followed methodology are discussed. The Dining Room glass window presents glasses colored in bulk with iron, manganese, cobalt, copper, and chromium; silver staining was also detected and was used to create the yellow and orange colors. The Atelier panel was produced with uncolored glasses painted with grisaille and enamels; the chromophores identified are similar to the species identified in the Dining Room panel., The authors thank Dr. T. Marques and Dr. A. Mântua (Casa-Museu Dr. Anastácio Gonçalves, Lisbon, Portugal) for the facilities provided to accomplish this research and B. Doherty (SMAArt Centre and CNR-ISTM, Perugia, Italy) for the manuscript revision. This work has been funded collectively by the Access to Research Infrastructures activity in the Horizon 2020 Programme of the EU (IPERION CH Grant Agreement n. 654028), the Fundação para a Ciência e a Tecnologia de Portugal (Project ref. UID/EAT/00729/2019) and Fundación General CSIC (ComFuturo Programme)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Impact of solar radiation and environmental temperature on Art Nouveau glass windows

  • Palomar Sanz, Teresa
  • Silva, Miguel
  • Vilarigues, Márcia
  • Pombo Cardoso, Isabel
  • Giovannacci, David
© The Author(s)., This work presents the results of the evaluation of two Art Nouveau glass windows from the Casa-Museu Dr. Anastácio Gonçalves (Lisbon, Portugal) with IR-thermography during the summer solstice. According to the measurements, the surface temperature of glass depended on the outdoor environmental temperature and, mainly, on the direct solar radiation. Colored glasses presented a higher surface temperature due to the absorption of their chromophores at near-IR wavelengths. Enamels and grisailles showed higher surface temperatures than their support glasses due to both their chemical composition and color. The protective glazing, with small slits in one of the window panels, induced a hot-air pocket in its upper part due to the insufcient ventilation., This work has been funded collectively by the Access to Research Infrastructures activity in the Horizon 2020 Programme of the EU (IPERION CH Grant Agreement No. 654028), the Fundação para a Ciência e Tecnologia of Portugal (Project Ref. UID/EAT/00729/2019) and Fundación General CSIC of Spain (ComFuturo Programme). We also acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

An Overview of the Use of EIS Measurements for the Assessment of Patinas and Coatings in the Conservation of Metallic Cultural Heritage

  • Ramírez Barat, Blanca
  • Letardi, P.
  • Cano Díaz, Emilio
Electrochemical impedance spectroscopy (EIS) is a technique widely used in the field of corrosion science and for coatings evaluation. Its application to the field of cultural heritage started in the early 1990s. Since then, around a hundred references have appeared in conservation and scientific literature addressing different topics such as corrosion processes, field measurements, conservation assessment, and protective coatings evaluation. All of these research results constitute highly valuable information, This work was funded by project HAR2017-89911-R (AEI-MCIU) and IPERION-CH (E.U. H2020, G.A. 654028) and supported by the CNR-STM program.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Non-linear laser microscopies for non-destructive analysis of paintings

  • Sanz, Mikel
  • Oujja, Mohamed
  • Dal Fovo, A.
  • Martínez-Hernández, A.
  • Fontana, R.
  • Castillejo, Marta
TechnoHeritage 2019, Seville, March 26-30, 2019, Non-invasive, high resolution 3D analysis techniques are very much sought for the characterization of multilayer, multicomponent substrates, as the ones often encountered in artworks and objects of cultural heritage. The nonlinear optical interaction of ultrashort laser pulses with a sample is the basis of several modalities of nonlinear optical microscopy (NLOM), a family of techniques which has been recently introduced for the study of paintings, parchment, textiles and corrosion layers over metallic substrates among others (i.e. Phys. Chem. Chem. Phys., 2017, 19, 22836). NLOM relies on near-IR, femtosecond laser excitation of transparent materials to simultaneously induce, with 3D micrometric resolution and depending on the optical properties of the sample, multiphoton excitation fluorescence (MPEF) and second and third harmonic generation (SHG, THG) signals. MPEF emission is related to the sample chemical composition, SHG identifies the presence of non¿centrosymmetric structures and THG allows imaging interfaces between optically dissimilar materials. Here, we present the application of the MPEF modality of NLOM to study painting substrates (varnished painting mock-ups and model acrylics paints) using a custom-made laser scanning microscope (set-up sketched in the Figure) based on a Ti:Sapphire laser oscillator (wavelength of 800 nm, repetition rate of 80 MHz and pulses of 70 femtoseconds). MPEF measurements were supported by morphological and chemical assessment of paint layers by optical coherence tomography (OCT) and by linear laser-induced fluorescence and micro-Raman spectroscopies. The results obtained pave the way for further non-linear stratigraphic investigations on paintings. Acknowledgements This work is funded by projects IPERION-CH (H2020-INFRAIA-2014-2015, nº 654028), Geomateriales 2- CM (S2013/MIT-2914) and CTQ2016-75880-P (MINECO, Spain)., This work is funded by projects IPERION-CH (H2020-INFRAIA-2014-2015, nº 654028), Geomateriales 2- CM (S2013/MIT-2914) and CTQ2016-75880-P (MINECO, Spain).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

In-Depth Analysis of Egg-Tempera Paint Layers by Multiphoton Excitation Fluorescence Microscopy

  • Fovo, A.D.
  • Sanz, Mikel
  • Oujja, Mohamed
  • Fontana, Raffaella
  • Mattana, Sara
  • Cicchi, Riccardo
  • Targowski, Piotr
  • Sylwestrzak, Marcin
  • Romani, Aldo
  • Grazia, Chiara
  • Filippidis, George
  • Psilodimitrakopoulos, Sotiris
  • Lemonis, Andreas
  • Castillejo, Marta
© 2020 by the authors., The non-invasive depth-resolved imaging of pictorial layers in paintings by means of linear optical techniques represents a challenge in the field of Cultural Heritage (CH). The presence of opaque and/or highly-scattering materials may obstruct the penetration of the radiation probe, thus impeding the visualization of the stratigraphy of paintings. Nonlinear Optical Microscopy (NLOM), which makes use of tightly-focused femtosecond pulsed lasers as illumination sources, is an emerging technique for the analysis of painted objects enabling micrometric three-dimensional (3D) resolution with good penetration capability in semi-transparent materials. In this work, we evaluated the potential of NLOM, specifically in the modality of Multi-Photon Excitation Fluorescence (MPEF), to probe the stratigraphy of egg-tempera mock-up paintings. A multi-analytical non-invasive approach, involving ultraviolet-visible-near infrared (UV-Vis-NIR) Fiber Optics Reflectance Spectroscopy, Vis-NIR photoluminescence, and Laser Induced Fluorescence, yielded key-information for the characterization of the constituting materials and for the interpretation of the nonlinear results. Furthermore, the use of three nonlinear optical systems allowed evaluation of the response of the analyzed paints to different excitation wavelengths and photon doses, which proved useful for the definition of the most suitable measurement conditions. The micrometric thickness of the paint layers, which was not measurable by means of Optical Coherence Tomography (OCT), was instead assessed by MPEF, thus demonstrating the effectiveness of this nonlinear modality in probing highly-scattering media, while ensuring the minimal photochemical disturbance to the examined materials., This research was funded by the European H2020 IPERION CH Project (Integrated Platform for the European Research Infrastructure ON Cultural Heritage (GA 654028, WP6); Spanish State Research Agency (AEI) and European Regional Development (FEDER) through Project CTQ2016-75880-P-AEI/FEDER, UE; and TOP Heritage-CM (S2018/NMT-4372) from the Community of Madrid and with the support of Plataforma Temática Interdisciplinar of CSIC “Patrimonio Abierto: Investigación y Sociedad” (PTI-PAIS)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Safe limits for the application of nonlinear optical microscopies to cultural heritage: A new method for in-situ assessment

  • Dal Fovo, A.
  • Sanz, Mikel
  • Mattana, S.
  • Oujja, Mohamed
  • Marchetti, M.
  • Pavone, F.S.
  • Cicchi, R.
  • Fontana, R.
  • Castillejo, Marta
9 pags., 6 figs., 2 tabs., Nonlinear optical microscopies (NLOM) are emerging techniques for the monitoring and preservation of cultural heritage, providing morphological, structural and compositional information on a large variety of artistic materials and objects. Being non-invasiveness the main requirement in artwork diagnostics, it becomes increasingly necessary to verify the absence of physicochemical alterations possibly induced by the use of high intensity radiation sources, and thus to find the exposure limits for safe applications. In this work, we propose a new methodology to set the criteria of damage evaluation for near infrared femtosecond pulsed lasers used for examining painted samples by means multi-photon excited fluorescence (MPEF), modality of NLOM. The method is based on the detection of changes in the MPEF signal upon repetitive irradiation on a series of modern acrylic painted samples, complemented by Raman spectroscopy measurements performed before and after irradiation. The obtained results allowed determining a safe average laser power range for the non-invasive determination of thickness in paint layers., The research leading to these results was funded by the EU Community's H2020 Research Infrastructure program under theIPERION CH Project (GA 654028), by the Spanish State Research Agency (AEI) and European Regional Development (FEDER) through Project CTQ2016-75880-P-AEI/FEDER,UE,by program TOP Heritage-CM (S2018/NMT-4372) from the Community of Madrid and by Plataforma Tem�tica Interdisciplinar of CSIC ?Patrimonio Abierto:Investigaci�n y Sociedad?(PTI-PAIS).MC is grateful for a Salvador deMadariaga mobility grant (PRX18/00029
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Laser spectroscopies and microscopies for research in cultural heritage, Espectroscopías y microscopías láser para la investigación del patrimonio cultural

  • Oujja, Mohamed
  • Sanz, Mikel
  • Castillejo, Marta
  • Detalle, Vincent
  • Dal Fovo, A.
  • Fontana, Raffaella
Laser spectroscopies, including Raman, laser induced fluorescence (LIF) and laser induced breakdown spectroscopy (LIBS) have been used for decades for the analysis of materials and substrates of artistic interest. Raman and LIBS provide complementary information on molecular and elemental composition, respectively, while LIF gives additional data related to the presence of fluorescence emitting substances. Most recently introduced in the study of cultural heritage is the technique of nonlinear optical microscopy (NLOM), which in its modalities of multi-photon excitation fluorescence (MPEF) and generation of second or third harmonic (SHG, THG) serve for threedimensional characterization with micrometric precision, without sampling, of the chemical nature, structure and thickness of mutilayer and multicomponent substrates. In this work, recent advances in the integration of the three mentioned laser spectroscopies and different modalities of NLOM in various types of hybrid systems are illustrated, showing their use for morphological and chemical characterization of pictorial and stone based substrates., Las espectroscopías láser, incluyendo Raman, fluorescencia inducida por láser (LIF) y espectroscopía de ruptura inducida por láser (LIBS), se utilizan desde hace décadas para el análisis de materiales y sustratos de interés artístico o patrimonial. Raman y LIBS proporcionan información complementaria sobre la composición molecular y elemental, respectivamente, mientras que LIF aporta datos adicionales relacionados con la presencia de sustancias emisoras de fluorescencia. De más reciente introducción en el estudio del patrimonio cultural es la microscopía óptica no lineal (NLOM), que, en sus modalidades de fluorescencia de excitación multifotónica (MPEF) y de generación de segundo o tercer armónico (SHG, THG), sirven para la caracterización, tridimensional, sin toma de muestra y precisión micrométrica, de la naturaleza química, estructura y espesor de substratos multicapa y multicomponente. En este trabajo se ilustran avances recientes en la integración de las tres espectroscopías láser mencionadas y de las distintas modalidades de NLOM en sistemas híbridos y sobre su uso en la caracterización morfológica y química de substratos pétreos y pictóricos., This work has been funded by the Spanish project PID2019-104124RB-I00/AEI/10.13039/501100011033), the EU projects «Integrated Platform for the European Research Infrastructure on Cultural Heritage» (IPERION-CH, Ref. H2020-INFRAIA-2014-2015, GRANT n° 654028), «Integrating Platforms for the European Research Infrastructure ON Heritage Science» IPERION HS, Ref. H2020-INFRAIA-2018-2020, GRANT n.° 871034), and by program TOP Heritage-CM (S2018/ NMT-4372) from the Community of Madrid. M.O. thanks CSIC for a contract and M.C. to Project PRX18/00029 (Estancia Salvador de Madariaga, Ministerio de Ciencia, Innovación y Universidades), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Assessing the decorative techniques of two Art Nouveau glass windows by optical coherence tomography (OCT)

  • Palomar Sanz, Teresa
  • Iwanicka, Magdalena
  • Pombo Cardoso, Isabel
  • Vilarigues, Márcia
  • Targowski, Piotr
The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated in a credit line to the data., [EN] This work presents an assessment of the different decoration techniques applied in the two glass windows from the Casa-Museu Dr. Anastácio Gonçalves (Lisbon, Portugal) by Optical coherence tomography (OCT). The Dining Room glass window was found to be decorated with grisailles and acid etching, and the Atelier window with grisaille, enamel, and cold painting. The alteration state of the surface decorations was also assessed. The thicker surface decorations (grisailles and enamels) presented cracks and detachments, in contrast to the thinner lines which are normally well preserved. OCT is a suitable technique for characterizing glass decoration in situ without dismounting the stained-glass window; and able to reveal the condition and methods of manufacture that cannot be detected simply by visual inspection., This study was partial funded by the Fundação para a Ciência e a Tecnologia of Portugal (Projects ref. UID/EAT/00729/2020, UIDP/00729/2020, UIDB/ 04349/2020, PTDC/ART-OUT/5992/2020 and researcher grants CEECIND/ 02249/2021 and 2021.01436.CEECIND) and acknowledges the financial support of the Access to Research Infrastructures activity in the H2020 Programme of the EU (IPERION CH Grant Agreement n. 654028 and IPERION HS Grant Agreement n. 871034)., Peer reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Micro-PIXE studies on prehistoric chert tools: elemental mapping to determine Palaeolithic lithic procurement

  • Sánchez de la Torre, Marta
  • Angyal, Anikó
  • Kertész, Zsófia
  • Dubernet, Stéphan
  • Le Bourdonnec, Francois-Xavier
  • Papp, Enikő
  • Szoboszlai, Zoltán
  • Török, Zsófia
  • Csepregi, Ákos
  • Szikszai, Zita
This paper contributes to an understanding of the distances and choices involved in raw material procurement strategies by Upper Palaeolithic communities through a Pyrenean geoarchaeological case study. Methodologically it involved using Particle Induced X-ray Emission (PIXE) with a focused proton beam to determine the concentration and distribution of elements in geological samples from three natural primary outcrops belonging to two geological formations outcropping in the French side of the Pyrenees. While it was not possible to distinguish the formation through reference to major and minor elements, some variations were revealed at the trace elemental level. With the aim to determine if these elements were associated with the Si matrix or to a specific inclusion, elemental maps were acquired and the elemental composition of the identified inclusions were also determined. These chemical signatures were then compared to those generated from archaeological artefacts from sites in northern Spain as a means of reconstructing the catchment areas used by prehistoric groups for their chert procurement. The results indicate the existence of trans-Pyrenean long distance procurement strategies during the Magdalenian (13700 to the 18800 cal BP).