Skip to main content

INVESTIGACION DE SUPERFICIES POLIMERICAS, INORGANICAS E HIBRIDAS NANO Y MICROESTRUCTURADAS Y DE SUS INTERACCIONES: DE LAS BASES FISICO-QUIMICAS A SUS APLICACIONES

MAT2015-66443-C2-1-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2015
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Dirección General de Investigación Científica y Técnica
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Fluence dependent electrical conductivity in aluminium thin films grown by infrared pulsed laser deposition

  • Rebollar, Esther
  • Martínez-Tong, Daniel E.
  • Sanz, Mikel
  • Oujja, Mohamed
  • Marco, J.F.
  • Ezquerra, Tiberio A.
  • Castillejo, Marta
We studied the effect of laser fluence on the morphology, composition, structure and electric conductivity of deposits generated by pulsed laser ablation of a metallic aluminium target in vacuum using a Q-switched Nd:YAG laser (1064 nm, 15 ns). Upon irradiation for one hour at a repetition rate of 10 Hz, a smooth layer of several tens of nanometres, as revealed by atomic force microscopy (AFM) was deposited on glass. Surface chemical composition was determined by X-ray photoelectron spectroscopy, and to study the conductivity of deposits both I–V curves and conductive-AFM measurements were performed. Irradiation at fluences around 2.7 J/cm resulted in deposition of amorphous aluminium oxide films. Differently, at higher fluences above 7 J/cm, the films are constituted by metallic aluminium. Optical emission spectroscopy revealed that highly ionized species are more abundant in the ablation plumes generated at higher fluences. The results demonstrate the possibility to control by PLD the metal or dielectric character of the films., This research was supported by the Spanish Ministry of Economy and Competitiveness (MINECO, projects CTQ2013-43086-P, MAT2015-66443-C2-1-R and a Ramon y Cajal contract awarded to E.R. (RYC-2011-08069)). MO thanks CSIC for a contract., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Modification of poly(dimethylsiloxane) as a basis for surface wrinkle formation: Chemical and mechanical characterization

  • Campo, Ángel Adolfo del
  • Nogales, Aurora
  • Ezquerra, Tiberio A.
  • Rodríguez-Hernández, Juan
9 págs.; 6 figs., In this manuscript, the processes occurring during UV-ozone treatment on polydimethylsiloxane (PDMS) surfaces i.e. formation of a stiff silica-like layer and surface degradation have been studied. While the chemical changes have been evaluated using Confocal Raman Microscopy (CRM) with submicrometer resolution, partial surface degradation occurring during longer ozone treatments have been evidenced both by Optical Profilometry and AFM. Whereas previous studies reported the formation of a thin silica layer of around 20–30 nm up to 200 nm depending on the method employed, herein, we demonstrated that in effect a thin rigid layer is formed but instead of a sharp interface predicted by previous reports a gradient depth profile was obtained. CRM evidenced the formation of a 4 μm layer of modified material. By Quantitative Nanomechanical Mapping (QNM) and based on the equations that predict the wrinkle formation, a surface layer thickness of around of 4.5 μm was also determined.© 2016 Elsevier Ltd. All rights reserved., The authors gratefully acknowledge support from the Consejo Superior de Investigaciones Científicas (CSIC). Equally, this work was financially supported by the Ministerio de Economía y Competitividad (MINECO) (MAT2013-47902-C2-1-R, MAT2013-48009-C04-1-P, MAT2014-59187-R and MAT2015-66443-C2-1-R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Wrinkling and Folding on Patched Elastic Surfaces: Modulation of the Chemistry and Pattern Size of Microwrinkled Surfaces

  • Nogales, Aurora
  • Campo, Ángel Adolfo del
  • Ezquerra, Tiberio A.
  • Rodríguez-Hernández, Juan
8 pags., 5 figs., 2 tabs., An unconventional strategy is proposed that takes advantage of localized high-deformation areas, referred to as folded wrinkles, to produce microstructured elastic surfaces with precisely controlled pattern dimensions and chemical distribution. For that purpose, elastic PDMS substrates were prestretched to a different extent and oxidized in particular areas using a mask. When the stretching was removed, the PDMS substrate exhibited out-of-plane deformations that largely depend on the applied prestretching. Prestretchings below 100% lead to affine deformations in which the treated areas are buckled. On the contrary, prestretchings above ? >100% prior to surface treatment induce the formation of folded wrinkles on those micrometer-size ultraviolet-ozone (UVO) treated areas upon relaxation. As a result, dual periodic wrinkles were formed due to the alternation of highly deformed (folded) and low deformed (buckled) areas. Our strategy is based on the surface treatment at precise positions upon prestretching of the elastic substrate (PDMS). Additionally, this approach can be used to template the formation of wrinkled surfaces by alternating lines of folded wrinkles (valleys) and low-deformed areas (hills). This effect allowed us to precisely tune the shape and distribution of the UVO exposed areas by varying the prestretching direction. Moreover, the wrinkle characteristics, including period and amplitude, exhibit a direct relation to the dimensions of the patterns present in the mask., The authors gratefully acknowledge support from the Consejo Superior de Investigaciones Cientifícas (CSIC). Equally, this work was financially supported by the Ministerio de Economía y Competitividad (MINECO) (Grants MAT2013-47902-C2-1- R, MAT2013-48009-C04-1-P, MAT2014-59187-R, and MAT2015-66443-C2-1-R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Polymer crystallization in nanoparticles

  • Nogales, Aurora
  • Cui, Jing
  • Martínez-Tong, Daniel E.
  • Ezquerra, Tiberio A.
APS March Meeting 2017, New Orleans, Louisiana, March 13–17, 2017. -- http://meetings.aps.org/Meeting/MAR17/Session/T1.7, Crystallizable polymers con ned into nanodroplets and nanoparticles can serve as starting point in order to prepare nanocrystals with speci c functionalities. In addition, They can help to better understand the e ect of con nement on the mechanisms of crystal nucleation and growth. As compared to other con ning geometries, nanoparticles o er the advantage of providing a 3D con nement, without any preferential direction that may act as template. Also, nanoparticles o er a versatile geometry that enables the possibility of tuning the interaction with the con nement media. An example of this can be the di erences among free standing particles or those embedded either in soft or in rigid media. In this contribution we present results on the crystallization of selected conducting and ferroelectric polymers in nanoparticles prepared by miniemulsion and ash precipitation. Results suggest that the polymers crystallized in these geometries present metastable con guration that enhance the presence of mesophases not present in the bulk. The implication of this e ect on the physical properties will be discussed., Mineco (MAT2014-59187-R and MAT2015-66443-C2-1-R), Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Confinement effects in one-dimensional nanoarrays of polymer semiconductors and their photovoltaic blends

  • Hernández, Jaime J.
  • Puente-Orench, Inés
  • Ezquerra, Tiberio A.
  • Gutiérrez-Fernández, Edgar
  • García-Gutiérrez, Mari Cruz
We report on the strong changes induced, by confinement, in the microstructure of the semiconductor poly(2,5-bis(3-hexadecylthiophen-2-yl)thieno[3,2-b]thiophene) (PBTTT) and its photovoltaic blend with [6,6]-Phenyl-C71-butyric acid methyl ester (PC71BM). These organic compounds can be used as model systems to illustrate how sensitive this class of materials can be to spatial confinement on device-relevant length scales. The spatial confinement of nanofilaments as a function of diameter, from 180 to 25 nm, has been investigated by X-ray scattering with nanofocused synchrotron beams. The effects of spatial confinement are evident by crystallization in different crystal forms, reduction of crystallinity, phase segregation and anisotropic crystal orientation. It is also shown that confinement is an efficient tool to direct the overall texture included the crystal orientation of the homopolymer PBTTT and the PBTTT/PC71BM blend in a controlled manner., This work is funded by MINECO through projects MAT2014-59187-R and MAT2015-66443-C02 1-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Quantitative assessment by local probe methods of the mechanical and electrical properties of inkjet-printed PEDOT:PSS thin films over Indium Tin Oxide substrates

  • Gutiérrez-Fernández, Edgar
  • Gabaldón-Saucedo, I.A.
  • García-Gutiérrez, Mari Cruz
  • Varea, A.
  • Nogales, Aurora
  • Rebollar, Esther
  • Vilà, A.
  • Ezquerra, Tiberio A.
  • Cirera, A.
6 pags., 8 figs., Thin films of Poly(3,4-ethylenedioxythiophene)complexed with Poly(styrenesulfonate)(PEDOT:PSS)on Indium Tin Oxide (ITO)have been prepared by inkjet printing technology. The process allows obtaining thin films over large areas. A relatively broad range of thicknesses can be obtained by the addition of subsequent polymer layers resembling an additive manufacturing process. The resulting inkjet PEDOT:PSS films are homogeneous as regard both electrical and mechanical properties. In spite of the characteristic parallel line topography of these inkjet printed films, both the Quantitative Nanomechanical Mapping (QNM)and the Conductive-Atomic Force Microscope (C-AFM)characterization reveal homogeneous values throughout the polymer surface regardless of the welding zones. The results discussed in this work provide the basis for the application of inkjet printing as deposition method for electrically conducting PEDOT:PSS into a large area with mechanical stability., This work has been supported by Ministry of Science, Innovation and Universities (MCIU, Spain) under the projects MAT2014-59187-R, MAT2015-66443-C02-1-R and CTQ2016-75880-P. E.R. thanks MCIU for the tenure of a Ramón y Cajal contract (No. RYC-2011-08069). We thank Daniel Hermida for valuable technical support during measurements at BM26 at ESRF (Grenoble, France).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Broadband electrical conductivity of metal/carbon nanotubes polyamide 6 composites fabricated by reactive encapsulation

  • Oliveira, Filipa M.
  • Ezquerra, Tiberio A.
  • Denchev, Zlatan Z.
16 pags., 6 figs., 3 tabs., This is the first broadband dielectric spectroscopy study on the temperature- and frequency-dependent electrical conductivity of polyamide 6 (PA6) composites containing both metal microparticles (Al, Fe, or Cu) and carbon nanotubes (CNT). The dually reinforced PA6 hybrids are prepared through compression molding of metal- and CNT-loaded microparticles (MP). These MP are synthesized by activated anionic ring-opening polymerization (AAROP) of ε-caprolactam in suspension, carried out in the presence of the micron-sized metal powders and the nanosized CNT fillers, with a combined load of up to 10 wt%. The good dispersion of the two loads by the AAROP strategy results in a notable increase in the electrical conductivity by up to 11 orders of magnitude. Moreover, the frequency-dependent behavior of the measured conductivity obeys the so-called universal dynamic response. This response involves a direct current (d.c.) electrical conductivity (σdc) observed beyond a critical frequency, Fc , followed by a power-law response characterized by an exponent s, which fluctuates between 0.11 and 0.43. The σdc of the binary composites spans from 1.42 × 10−5 to 1.63 × 10−2 S/cm, this increase being attributed to the synergetic effect between CNT and the metal particles that contribute to the carrier mobility within the conductive network. Graphical Abstract: [Figure not available: see fulltext.], FMO and ZZD acknowledge the fnancial support by national funds through Fundação para a Ciência e Tecnologia (FCT), Project UID/CTM/50025/2019. FMO acknowledges also the FCT for the Ph.D. Grant PD/ BD/114372/2016 (AdvaMTech Ph.D. Program in Advanced Materials and Processing). Part of this work has been also supported by Spanish MINECO through the Project MAT2015-66443-C02-1-R, Peer reviewed