Skip to main content

MATERIALES POLIMERICOS ANTIMICROBIANOS PARA LA PREVENCION DE ENFERMEDADES INFECCIOSAS

MAT2013-47902-C2-1-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2013
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 19
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Antimicrobial films obtained from latex particles functionalized with quaternized block copolymers

  • Álvarez-Paino, Marta
  • Juan-Rodríguez, Rafael
  • Cuervo-Rodríguez, Rocío
  • Tejero, Rubén
  • López García, Daniel
  • López-Fabal, Fátima
  • Gómez-Garcés, José L.
  • Muñoz-Bonilla, Alexandra
  • Fernández-García, Marta
New amphiphilic block copolymers with antimicrobial properties were obtained by atom transfer radical polymerization (ATRP) and copper catalyzed cycloaddition following two approaches, a simultaneous strategy or a two-step synthesis, which were proven to be very effective methods. These copolymers were subsequently quaternized using two alkyl chains, methyl and butyl, to amplify their antimicrobial properties and to investigate the effect of alkyl length. Antimicrobial experiments in solution were performed with three types of bacteria, two gram-positive and one gram-negative, and a fungus. Those copolymers quaternized with methyl iodide showed better selectivities on gram-positive bacteria, Staphylococcus aureus and Staphylococcus epidermidis, against red blood cells, demonstrating the importance of the quaternizing agent chosen. Once the solution studies were performed, we prepared poly(butyl methacrylate) latex particles functionalized with the antimicrobial copolymers by emulsion polymerization of butyl methacrylate using such copolymers as surfactants. The characterization by various techniques served to test their effectiveness as surfactants. Finally, films were prepared from these emulsions, and their antimicrobial activity was studied against the gram-positive bacteria. The results indicate that the antimicrobial efficiency of the films depends not only on the copolymer activity but also on other factors such as the surface segregation of the antimicrobial agent to the interface., AcknowledgmentsThis work was financially supported by the MINECO (ProjectMAT2013-47902-C2-1-R). M. Álvarez-Paino and A. Muñoz-Bonillaalso acknowledge MINECO financial support for their FPI Grant andRamón y Cajal Contract, respectively. R. Tejero thanks CSIC for hisJAE-Predoctoral grant, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nanostructuration by self-assembly in N-alkyl thiazolium and triazolium side-chain polymethacrylates

  • Tejero, Rubén
  • Arbe, Arantxa
  • Fernández-García, Marta
  • López García, Daniel
Amphiphilic polymers are tunable systems to construct supramolecular hierarchically self-assembled structures. Six families of heterocyclic polymethacrylates (PMTAs) bearing 1,3-thiazole and 1,2,3-triazole pendant groups with alkyl and succinate spacers were chemically modified by quaternization reaction of the azole heterocycles with five alkylating agents (methyl, butyl, octyl, dodecyl, and hexadecyl iodide) leading to a library of 30 different amphiphilic poly(ionic liquid)s (PMTAs-RI). These polymers have been characterized in bulk by small- and wide-angle X-ray scattering (SAXS, WAXS) and differential scanning calorimetry (DSC). Quaternization induces a dramatic effect (increase) on the glass-transition temperature Tg, being strongest for methyl iodide members. Increasing the length of the quaternizing agent, plasticization is first observed, followed by a further increase of Tg. This effect, together with evidence of a second Tg and crystallization for the members with the longest quaternizing agents, could be attributed to the presence of well-developed alkyl nanodomains evidenced by the structural investigation. WAXS and SAXS results have been consistently interpreted by assuming nanostructuration driven by the amphiphilicity balance of poly(ionic liquid)s. The different morphologies revealed by SAXS have been characterized, assigning a plausible chemical nature to the phases involved in each case. The nonpolar fraction has been considered as the control parameter defining the main features of the achieved morphology. By increasing this parameter, structures ranging from hexagonally packed nonpolar cylinders in a polar matrix to the inverse situation have been found, passing through lamellar phases. Under some conditions, within the polar lamellae a third phase formed by cylinders of heterocycles has even been determined. We have checked the validity of the scenario proposed by comparing the sizes deduced from the SAXS analysis with the expected characteristic lengths of the associated moieties, inferring thereby how alkyl side groups arrange within the nanodomains. On the basis of the complete picture achieved, the type of nanostructures formed by this class of polymers can be predicted, if the chemical composition including the quaternization degree is known., This work has been supported by MAT2013-47902 and MAT2011-24797 (Spanish-MINECO and EU). R.T. acknowledges CSIC for his JAE-Pre grant. A.A. acknowledges financial support from the Projects MAT2012-31088 (Spanish-MINECO and EU) and IT-654-13 (Basque Government)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Microstructured Polymer Blend Surfaces Produced by Spraying Functional Copolymers and Their Blends

  • Vargas-Alfredo, Nelson
  • Rodríguez-Hernández, Juan
We described the fabrication of functional and microstructured surfaces from polymer blends by spray deposition. This simple technique offers the possibility to simultaneously finely tune the microstructure as well as the surface chemical composition. Whereas at lower polymer concentration, randomly distributed surface micropatterns were observed, an increase of the concentration leads to significant changes on these structures. On the one hand, using pure homopolystyrene fiber-like structures were observed when the polymer concentration exceeded 30 mg/mL. Interestingly, the incorporation of 2,3,4,5,6-pentafluorostyrene changed the morphology, and, instead of fibers, micrometer size particles were identified at the surface. These fluorinated microparticles provide superhydrophobic properties leading to surfaces with contact angles above 165°. Equally, in addition to the microstructures provided by the spray deposition, the use of thermoresponsive polymers to fabricate interfaces with responsive properties is also described. Contact angle measurements revealed variations on the surface wettability upon heating when blends of polystyrene and polystyrene-<i>b</i>-poly(dimethylaminoethyl methacrylate) are employed. Finally, the use of spraying techniques to fabricate gradient surfaces is proposed. Maintaining a constant orientation, the surface topography and thus the contact angle varies gradually from the center to the edge of the film depending on the spray angle., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)., The authors gratefully acknowledge support from the Consejo Superior de Investigaciones Científicas (CSIC). This work was equally financially supported by the Ministerio de Economía y Competitividad (MINECO) through MAT2013-47902-C2-1-R (JRH). Nelson Vargas Alfredo thanks the support for postdoctoral research from the CONACYT (CN: 251394).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Antimicrobial Polymers in the Nano-World

  • Álvarez-Paino, Marta
  • Muñoz-Bonilla, Alexandra
  • Fernández-García, Marta
Infections are one of the main concerns of our era due to antibiotic-resistant infections and the increasing costs in the health-care sector. Within this context, antimicrobial polymers present a great alternative to combat these problems since their mechanisms of action differ from those of antibiotics. Therefore, the microorganisms’ resistance to these polymeric materials is avoided. Antimicrobial polymers are not only applied in the health-care sector, they are also used in many other areas. This review presents different strategies that combine nanoscience and nanotechnology in the polymer world to combat contaminations from bacteria, fungi or algae. It focuses on the most relevant areas of application of these materials, viz. health, food, agriculture, and textiles., This work was financially supported by the MINECO (Project MAT2013-47902-C2-1-R). A. Muñoz-Bonilla acknowledges MINECO financial support for her Ramón y Cajal Contract. Authors specially thank Sandhya Moise for her contribution to the final manuscrip, We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Modification of poly(dimethylsiloxane) as a basis for surface wrinkle formation: Chemical and mechanical characterization

  • Campo, Ángel Adolfo del
  • Nogales, Aurora
  • Ezquerra, Tiberio A.
  • Rodríguez-Hernández, Juan
9 págs.; 6 figs., In this manuscript, the processes occurring during UV-ozone treatment on polydimethylsiloxane (PDMS) surfaces i.e. formation of a stiff silica-like layer and surface degradation have been studied. While the chemical changes have been evaluated using Confocal Raman Microscopy (CRM) with submicrometer resolution, partial surface degradation occurring during longer ozone treatments have been evidenced both by Optical Profilometry and AFM. Whereas previous studies reported the formation of a thin silica layer of around 20–30 nm up to 200 nm depending on the method employed, herein, we demonstrated that in effect a thin rigid layer is formed but instead of a sharp interface predicted by previous reports a gradient depth profile was obtained. CRM evidenced the formation of a 4 μm layer of modified material. By Quantitative Nanomechanical Mapping (QNM) and based on the equations that predict the wrinkle formation, a surface layer thickness of around of 4.5 μm was also determined.© 2016 Elsevier Ltd. All rights reserved., The authors gratefully acknowledge support from the Consejo Superior de Investigaciones Científicas (CSIC). Equally, this work was financially supported by the Ministerio de Economía y Competitividad (MINECO) (MAT2013-47902-C2-1-R, MAT2013-48009-C04-1-P, MAT2014-59187-R and MAT2015-66443-C2-1-R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Honeycomb films with core-shell dispersed phases prepared by combination of breath figures and phase separation process of ternary blends

  • Campo, Ángel Adolfo del
  • Sanz de León, Alberto
  • Rodríguez-Hernández, Juan
  • Muñoz-Bonilla, Alexandra
Herein, we propose a strategy to fabricate core¿shell microstructures ordered in hexagonal arrays by combining the breath figures approach and phase separation of immiscible ternary blends. This simple strategy to fabricate these structures involves only the solvent casting of a ternary polymer blend under moist atmosphere, which provides a facile and low-cost fabrication method to obtain the porous structures with a core¿shell morphology. For this purpose, blends consisting of polystyrene (PS) as a major component and PS40-b-P(PEGMA300)48 amphiphilic copolymer and polydimethylsiloxane (PDMS) as minor components were dissolved in tetrahydrofuran and cast onto glass wafers under humid conditions, 70% of relative humidity. The resulting porous morphologies were characterized by optical and confocal Raman microscopy. In particular, confocal Raman results demonstrated the formation of core¿shell morphologies into the ordered pores, in which the PS forms the continuous matrix, whereas the other two phases are located into the cavities (PDMS is the core while the amphiphilic copolymer is the shell). Besides, by controlling the weight ratio of the polymer blends, the structural parameters of the porous structure such as pore diameter and the size of the core can be effectively tuned., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Antimicrobial surfaces obtained from blends of block copolymers synthesized by simultaneous ATRP and click chemistry reactions

  • Álvarez-Paino, Marta
  • Bonilla, Pablo
  • Cuervo-Rodríguez, Rocío
  • López-Fabal, Fátima
  • Gómez-Garcés, José L.
  • Muñoz-Bonilla, Alexandra
  • Fernández-García, Marta
A series of amphiphilic block copolymers based on styrene (S) and a monomer bearing both thiazole and triazole groups (MTA) were synthesized by combination of ATRP and click chemistry. In particular, two approaches were followed; the direct ATRP from a PS macroinitiator of the pre-synthesized MTA antimicrobial monomer; and the simultaneous synthesis and polymerization of the MTA through a one-step ‘click chemistry’/ATRP process. Both strategies conduct to well-defined block copolymers with controlled molecular weight and low polydispersity. Subsequent quaternization of the thiazole and triazole groups of MTA units with butyl iodine renders systems with antimicrobial properties. Although these systems presented relatively low antimicrobial activity against bacteria and fungi in aqueous media, the preparation of surfaces functionalized with these copolymers leads to potent antimicrobial surfaces, especially against gram-positive bacteria., This work was supported financially by the MINECO (Projects MAT2013-47902-C2-1-R and MAT2016-78437-R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Fabrication of 3D printed objects with controlled surface chemistry and topography

  • Vargas-Alfredo, Nelson
  • Reinecke, Helmut
  • Gallardo Ruiz, Alberto
  • Campo, Ángel Adolfo del
  • Rodríguez-Hernández, Juan
We describe a novel strategy to modify the surface topography as well as the chemical composition of 3D parts fabricated by additive manufacturing. The 3D objects were fabricated by fused deposition modeling (FDM) using styrene filaments. The surface of the objects was then topographically modified providing materials with porous surfaces by means of the Breath Figures approach. By immersion of the object in a chloroform/polystyrene solution during few seconds and evaporation in a controlled humidity chamber, 3D objects decorated with pores over the entire surfaces could be prepared. Moreover, this approach permitted the modification of the pore size as a function of the immersion time as well as the solution concentration. Finally, the porous surface was modified by using a chemical treatment with chlorosulfonic acid. The created chlorosulfonyl groups were used to anchor different chemical compounds to the 3D object with the subsequent change of their surface properties., The authors gratefully acknowledge support from the ConsejoSuperior de Investigaciones Científicas (CSIC). Equally, this work was financially supported by the Ministerio de Economía y Competitividad (MINECO) through MAT2013-47902-C2-1-R, MAT2013-42957-R and MAT2016-78437-R (FEDER – EU)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Wrinkling and Folding on Patched Elastic Surfaces: Modulation of the Chemistry and Pattern Size of Microwrinkled Surfaces

  • Nogales, Aurora
  • Campo, Ángel Adolfo del
  • Ezquerra, Tiberio A.
  • Rodríguez-Hernández, Juan
8 pags., 5 figs., 2 tabs., An unconventional strategy is proposed that takes advantage of localized high-deformation areas, referred to as folded wrinkles, to produce microstructured elastic surfaces with precisely controlled pattern dimensions and chemical distribution. For that purpose, elastic PDMS substrates were prestretched to a different extent and oxidized in particular areas using a mask. When the stretching was removed, the PDMS substrate exhibited out-of-plane deformations that largely depend on the applied prestretching. Prestretchings below 100% lead to affine deformations in which the treated areas are buckled. On the contrary, prestretchings above ? >100% prior to surface treatment induce the formation of folded wrinkles on those micrometer-size ultraviolet-ozone (UVO) treated areas upon relaxation. As a result, dual periodic wrinkles were formed due to the alternation of highly deformed (folded) and low deformed (buckled) areas. Our strategy is based on the surface treatment at precise positions upon prestretching of the elastic substrate (PDMS). Additionally, this approach can be used to template the formation of wrinkled surfaces by alternating lines of folded wrinkles (valleys) and low-deformed areas (hills). This effect allowed us to precisely tune the shape and distribution of the UVO exposed areas by varying the prestretching direction. Moreover, the wrinkle characteristics, including period and amplitude, exhibit a direct relation to the dimensions of the patterns present in the mask., The authors gratefully acknowledge support from the Consejo Superior de Investigaciones Cientifícas (CSIC). Equally, this work was financially supported by the Ministerio de Economía y Competitividad (MINECO) (Grants MAT2013-47902-C2-1- R, MAT2013-48009-C04-1-P, MAT2014-59187-R, and MAT2015-66443-C2-1-R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Smart pH-Responsive Antimicrobial Hydrogel Scaffolds Prepared by Additive Manufacturing

  • García Sánchez, Carolina
  • Gallardo Ruiz, Alberto
  • López García, Daniel
  • Elvira, Carlos
  • Azzahti, Asma
  • López-Martínez, Elena
  • Cortajarena, Aitziber L.
  • González-Henríquez, Carmen M.
  • Sarabia-Vallejos, Mauricio A.
  • Rodríguez-Hernández, Juan
We report on the fabrication of 3D printed pH-responsive and antimicrobial hydrogels with a micrometer-scale resolution achieved by stereolithography (SLA) 3D printing. The preparation of the hydrogels was optimized by selecting the most appropriate difunctional polyethylene glycol dimethacrylates (testing cross-linking agents with chain lengths ranging from 2 up to 14 units ethylene glycol) and introducing acrylic acid (AA) as a monofunctional monomer. As a result of the incorporation of AA, the hydrogels described are able to reversibly swell and shrink upon environmental changes on the pH, and the swelling extent is directly related to the amount of AA and can be thus finely tuned. More interestingly, upon optimization of the UV penetration depth employing a photoabsorber (Sudan I), a reliable procedure for the fabrication of 3D objects with a high model accuracy is shown. Finally, the antimicrobial properties of all of the hydrogels were demonstrated using Staphylococcus aureus as a bacterial model. We found that even those hydrogels with a low amount of AA monomeric units presented excellent antimicrobial properties against S. aureus., The authors gratefully acknowledge support from the Consejo Superior de Investigaciones Cientifícas (CSIC). Equally, this work was financially supported by the Ministerio de Economía y Competitividad (MINECO) through MAT2013-47902-C2- 1-R, BIO2016-77367-C2-1-R MAT2013-42957-R, and MAT2016-78437-R (FEDER−EU). The authors acknowledge financial support given by FONDECYT grant no. 1170209. M.A.S.-V. acknowledges the financial support given by CONICYT through the doctoral program scholarship grant. Finally, this study was funded by VRAC grant no. L216-04 of Universidad Tecnológica Metropolitana, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Wrinkled hydrogel surfaces with modulated surface chemistry and topography: evaluation as supports for cell growth and transplant

  • Martínez-Campos, Enrique
  • Gallardo Ruiz, Alberto
  • Luján, Noelia
  • Santos-Coquillat, A.
  • Reinecke, Helmut
  • Campo, Ángel Adolfo del
  • Rodríguez-Hernández, Juan
We report a straightforward procedure to simultaneously functionalize hydrophobic PC supports with vinylpyrrolidone (VP)-based hydrogels with both variable ionic load as well as surface topography, forming wrinkles. The strategy involves three consecutive steps: first, a contact of the polymeric support (PC) with a photopolymerizable solution comprising vinylic monomers is established. Second, UV-light exposure curing of the solution and finally, the third step involes the swelling of the hydrogel network that finally provokes its surface detachment. Interestingly, a wrinkled hybrid PC/hydrogel interface remains after this detachment. Several experimental parameters permitted us to finely control the wrinkle characteristics such as amplitude and period. The experimental parameters that can be varied, herein we will focus on the variation of the elapsed time (i.e., time of contact between the support and the photosensitive monomer mixture, or the solvent (type and amount) included in the monomer mixture. Equally, the nature of the additional ionic methacrylate monomers (M) employed plays a key role on the final topography. According to confocal raman microscopy results, we evidenced that a monomer diffusion into the PC substrate before the UV irradiation step modifies the interfacial (hydrogel/substrate) chemical composition and leads upon UV irradiation to the formation of a thin hydrogel surface layer. The surface chemical composition and structural characteristics were demonstrated to significantly change the surface interaction with different cell lines, affecting cell adhesion, proliferation, or transplantation., The authors gratefully acknowledge support from the Consejo Superior de Investigaciones Cientifícas (CSIC). Equally, thiswork was financially supported by the Ministerio de Economía y Competitividad (MINECO) through MAT2013-47902-C2-1-R, MAT2013-42957-R, and MAT2016-78437-R (FEDER −EU)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Industrial waste origin succinic anhydride-grafted atactic polypropylene as compatibilizer of full range polypropylene/polyamide 6 blends as revealed by dynamic mechanical analysis at the polypropylene glass transition

  • García-Martínez, Jesús María
  • Collar, Emilia P.
This work deals with a dynamic mechanical analysis (DMA) study on the effect of a novel interfacial agent containing maleated grafts on an industrial waste origin atactic polypropylene. This contains 3% of bridge-, backbone-, and terminal-grafted succinic anhydride groups (aPP-SA/SA). By considering a polymer blend as a special case of composite where the dispersed phase is mobile, it is assumed that both the amounts of polyamide 6 (PA6) and the interfacial agent (aPP-SA/SA) cause changes in the glass transition temperature of the polypropylene phase in the blend. In this work, we have used DMA parameters to evidence the real interfacial modifications caused by the presence of aPP-SA/SA in the isotactic polypropylene (iPP)/PA6 system at the iPP glass transition temperature on the basis that this is an unfavorable scenario for the action of aPP-SA/SA. Since each component of the blend is interacting with each other, and to include the influence of the dispersed phase, it is possible to use a Box–Wilson experimental design model by resembling the so-called “agent based models” to obtain algorithms forecasting the dynamic mechanical parameters (storage, E’, and loss moduli, E”) at the glass transition of iPP, in all the composition range of whatever iPP/PA6/aPP-SA/SA-modified blend. POLYM. ENG. SCI., 2019. © 2019 Society of Plastics Engineers., The results discussed at present work were partially obtained under the auspices of the MAT 2000-1499 and MAT2013-47902-C2-1-R Research Projects, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The Role of a Succinyl Fluorescein-Succinic Anhydride Grafted Atactic Polypropylene on the Dynamic Mechanical Properties of Polypropylene/Polyamide-6 Blends at the Polypropylene Glass Transition

  • García-Martínez, Jesús María
  • Collar, Emilia P.
© 2020 by the authors., The present article adequately supports a twofold objective. On one hand, the study of the dynamic mechanical behavior of polypropylene/polyamide-6 blends modified by a novel compatibilizer was the objective. This was previously obtained by chemical modification of an atactic polypropylene polymerization waste. On the other hand, the accurate predictions of these properties in the experimental space scanned was the objective. As a novelty, this compatibilizer contains grafts rather than just maleated ones. Therefore, it consists precisely of an atactic polymer containing succinic anhydride (SA) bridges and both backbone and terminal grafted succinyl-fluorescein groups (SFSA) attached to the atactic backbone (aPP-SFSA). Therefore, it contains 6.2% of total grafting (2.5% as SA and 3.7% as SF), which is equivalent to 6.2 × 10−4 g·mol−1. This interfacial agent was uniquely designed and obtained by the authors themselves. Essentially, this article focuses on how the beneficial effect of both PA6 and aPP-SFSA varies the elastic (E’) and the viscous (E’’) behavior of the iPP/aPP-SFSA/PA6 blend at the iPP glass transition. Thus, we accurately measured the Dynamic Mechanical Analysis (DMA) parameters (E’, E’’) at this specific point considering it represents an extremely unfavorable scenario for the interfacial modifier due to mobility restrictions. Hence, this evidences the real interfacial modifications caused by aPP-SFSA to the iPP/PA6 system. Even more, and since each of the necessary components in the blend typically interacts with one another, we employed a Box–Wilson experimental design by its marked resemblance to the “agent-based models”. In this manner, we obtained complex algorithms accurately forecasting the dynamic mechanical behavior of the blends for all the composition range of the iPP/aPP-SFSA/PA6 system at the glass transition of iPP., The results discussed at present work were partially obtained under the auspices of the MAT 2000-1499 and MAT2013-47902-C2-1-R Research Projects., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The Variance of the Polypropylene alfa Relaxation Temperature in iPP/a-PP-pPBMA/Mica Composites

  • García-Martínez, Jesús María
  • Collar, Emilia P.
By considering that the ¿ relaxation related to the glass to rubber transition (obtained by dynamic mechanical analysis) of isotactic polypropylene (iPP) can be identified with the thermal history of the material (and so, with the processing step), this work deals with the changes in this transition temperature (T¿) in polypropylene/mica composites caused by the mutual effect of the other components (mica and interfacial additive). Here, the additive used is a p-phenylen-bis-maleamic grafted atactic polypropylene (aPP-pPBMA) obtained from polymerization wastes (aPP) by the authors. This additive contains 5.0·10¿4 g.mol¿1 (15% w/w) grafted pPBMA. In essence, this article has two different objectives: (1) To observe and discuss the changes in T¿ of the polymer matrix (iPP) caused by the combined effect of the other components (mica and aPP-pPBMA); and (2) predicting the values for T¿ in terms of both aPP-pPBMA and mica content for whatever composition in the experimental space scanned. This task was undertaken by employing a Box¿Wilson experimental design assuming the complex character of the interactions between the components of the iPP/aPP-pPBMA/mica system, which define the ultimate properties of the composite., The results discussed in this present work were partially obtained under the auspices of the MAT 2000-1499 and MAT2013-47902-C2-1-R Research Project
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enzymatic Catalysis Combining the Breath Figures and Layer-by-Layer Techniques: Toward the Design of Microreactors

  • Sanz de León, Alberto
  • Garnier, T.
  • Jierry, L.
  • Boulmedais, F.
  • Muñoz-Bonilla, Alexandra
  • Rodríguez-Hernández, Juan
Herein, we report the fabrication of microstructured porous surfaces with controlled enzymatic activity by combining the breath figures and the layer-by-layer techniques. Two different types of porous surfaces were designed based on fluorinated and carboxylated copolymers in combination with PS, using poly(2,3,4,5,6-pentafluorostyrene)-b-polystyrene (PS5F<inf>31</inf>-b-PS<inf>21</inf>) and polystyrene-b-poly(acrylic acid) (PS<inf>19</inf>-b-PAA<inf>10</inf>) block copolymers, respectively. For comparative purposes, flat surfaces having similar chemistry were obtained by spin-coating. Poly(sodium 4-styrenesulfonate)/poly(allylamine hydrochloride) (PSS/PAH) multilayers incorporating alkaline phosphatase (ALP) were built on these porous surfaces to localize the enzyme both inside and outside of the pores using PS/PS5F<inf>31</inf>-b-PS<inf>21</inf> surfaces and only inside the pores on PS/PS<inf>19</inf>-b-PAA<inf>10</inf> surfaces. A higher catalytic activity of ALP (about three times) was obtained with porous surfaces compared to the flat ones. The catalysis happens specifically inside the holes of PS/PS<inf>19</inf>-b-PAA<inf>10</inf>surfaces, where ALP is located. This opens the route for applications in microreactors., This work was financially supported by the MINECO (Projects MAT2010-17016 and MAT2013-47902-C2-1-R (JRH)). A S.d.L. thanks the Ministerio de Educación for his FPU predoctoral fellowship. T.G. thanks FRC for financial support. A.M.-B. gratefully acknowledges the MINECO for her Ramon y Cajal.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Switchable and pH responsive porous surfaces based on polypeptide-based block copolymers

  • Sanz de León, Alberto
  • Campo, Ángel Adolfo del
  • Rodríguez-Hernández, Juan
  • Muñoz-Bonilla, Alexandra
In the current work, we prepared stimuli responsive porous films by the breath figure approach using polymer blends consisting of high molecular weight polystyrene (HPS) and an amphiphilic block copolymer based on a pH sensitive poly(L-glutamic acid) (PGA) polypeptide. Thus, due to the breath figure mechanism the pores were enriched in pH responsive negatively charged carboxylate groups able to immobilize cationic molecules at pH above the pKa of the PGA. As a proof of concept, Rhodamine 6G was attached through electrostatic interactions at basic pH inside the cavities as shown by fluorescence microscopy. The variation of the wettability and the reversible immobilization of Rhodamine 6G as a function of pH were investigated by contact angle and fluorescence measurements. Moreover, the kinetics of the adsorption process of Rhodamine 6G onto the prepared smart films was explored evidencing a pseudo-second order kinetic model while the maximum absorption capacity at equilibrium was found to be ~ 6.4 nmol g., This work was financially supported by the MINECO (Project MAT2013-47902-C2-1-R and MAT2016-78437-R).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Fabrication of honeycomb films from highly functional dendritic structures: Electrostatic force driven immobilization of biomolecules

  • Sanz de León, Alberto
  • Malhotra, Sunny
  • Molina, M.
  • Calderón, M.
  • Muñoz-Bonilla, Alexandra
  • Rodríguez-Hernández, Juan
Herein we report the preparation of honeycomb porous films for selective immobilization of biomolecules via the breath figure technique, a water-assisted micropatterning method. In particular, porous films are obtained from polymeric blends composed of high molecular weight polystyrene as the major component and an oligoglycerol based dendron covalently bonded to a hydrophobic polystyrene chain as the minor constituent. The multivalent dendritic architecture presents a well-defined molecular structure with controlled glycine arrays on their surfaces. Due to the mechanism of the breath figure formation, the resulting films exhibit an especial chemical distribution at the surfaces, in which the dendritic functional polymer is located preferentially in the interior of the pores while the rest of the polymer surface is mainly formed by the high molecular weight polystyrene. The high amount of amine functional groups inside the pores allowed the specific immobilization of biomolecules into the cavities by electrostatic interactions. In particular, the protein bovine serum albumin (BSA) and a DNA sequence were attached onto the films as a proof of concept. Besides, it was demonstrated that the density of biomolecules immobilized can be easily tuned by varying the content of the dendritic functional polymer in the film. These unique characteristics open new alternatives for the use of these platforms in biorelated applications including bio-recognition processes, or the understanding of cell-protein and even cell-DNA interactions on biofunctional microstructured polymeric supports., This work was financially supported by the MINECO (Projects MAT2010-17016 and MAT2013-47902-C2-1-R (JRH)). A. Muñoz- Bonilla gratefully acknowledges the MINECO for her Ramon y Cajal contract. A. S. de León thanks the Ministerio de Educación for his FPU predoctoral fellowship and DAAD for his short-term scholarship for research stays (A/13/ 71498). M. Calderón gratefully acknowledges financial support from the Bundesministerium für Bildung und Forschung (BMBF) through the NanoMatFutur award (13N12561), the Helmholtz Virtual Institute, Multifunctional Biomaterials for Medicine and the Freie Universität Focus Area Nanoscale. M. Molina acknowledges financial support from the Alexander von Humboldt Foundation
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Design of hybrid gradient porous surfaces with magnetic nanoparticles

  • Sanz de León, Alberto
  • Rodríguez-Hernández, Juan
  • Mazarío, Eva
  • Sánchez-Marcos, Jorge
  • Menéndez, Nieves
  • Herrasti, Pilar
  • Muñoz-Bonilla, Alexandra
This article describes the preparation of hybrid gradient porous surfaces by using the breath figures approach. In a first step gradient porous surfaces were created from polymeric blends consisting of a linear polystyrene as major component and amphiphilic copolymers of poly(styrene-co-acrylic acid) as minor component. THF was used as solvent conducting to porous surfaces with a gradual variation of the pore size in a radial manner due to the long evaporation time. A detailed investigation of the influence of chemical composition of the copolymer (i.e. ratio styrene/acrylic acid) on the porous films was carried out. These films were successfully employed to prepare hybrid gradient surfaces by incorporating of magnetic nanoparticles inside the cavities. For this purpose two different strategies were explored. On one hand a magnetic nanoparticles aqueous suspension was placed on the porous surface with a magnet below the film, and subsequently the colloidal suspension was removed. Alternatively, the magnetic suspension was placed onto the surface and left until complete evaporation. A further step of peeling off the top layer also conducts to the decoration of the nanoparticles exclusively in the interior of the holes. Both strategies allow the preparation of hybrid surfaces with a variation of the content of magnetic nanoparticles magnetic inside the holes as a function of the radial position., This work was financially supported by the MINECO (Projects MAT2013-47902-C2-1-R and Project MAT2012-37109-C02-02). A. Muñoz-Bonilla gratefully acknowledges the MINECO for her Ramon y Cajal contract and A. S. de Leónn thanks the Ministerio de Educación ́ for his FPU predoctoral fellowship.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A Dynamic Mechanical Analysis on the Compatibilization Effect of Two Different Polymer Waste-Based Compatibilizers in the Fifty/Fifty Polypropylene/Polyamide 6 Blend

  • Collar, Emilia P.
  • García-Martínez, Jesús María
This study aims to examine the 50/50 polypropylene/polyamide 6 (iPP/PA6) system molded under confined flow conditions, both in its original state and after being modified by two different interfacial agents. This study provides two main insights. Firstly, it focuses on a polymer blend close to phase inversion. Secondly, it investigates the impact of using two different types of interfacial agents (derived from polymer waste) to enhance the compatibility between iPP and PA6. Dynamic Mechanical Analysis (DMA) has been employed to achieve these objectives. It is important to note that the investigation of the 50/50 iPP/PA6 system is a crucial focus predicted in previous studies, where a series of mechanical properties were evaluated using Box–Wilson design of experiments (DOEs) over the whole compositional range on the iPP/PA6 binary system. Thus, two interfacial modifiers, namely succinic anhydride (SA)-grafted atactic polypropylene with terminal, side, and bridge SA grafts (aPP-SASA) and succinyl-fluoresceine (SF) with bridge succinic anhydride grafting atactic polypropylene (aPP-SFSA), were employed. The authors obtained and characterized these agents. The quantity of these agents used in the blend was identified as a critical coordinate in prior studies conducted by the authors. The processing method used, compression molding under confined conditions, was chosen to minimize any orientation effect on the emerging morphology. All characterization procedures were performed on samples processed by contour machining to retain the blend morphologies as they emerged from the processing stage. Results from WAXS and SAXS synchrotron tests concluded there were no changes in the crystal morphology of the iPP or the PA6 in the blends nor any co-crystallization process throughout the compositional range. These findings, and the long period fits on the PP crystalline phase for the fifty/fifty blends we are discussing, will support the present DMA study. Finally, the efficiency of these interfacial modifiers has been concluded, even in this unfavorable scenario., The results discussed at present work were partially obtained under the auspices of the MAT 2000-1499 and MAT2013-47902-C2-1-R Research Projects, Peer reviewed