Skip to main content

NANOPARTICULAS Y SUPERFICIES MICRO/NANOESTRUCTURADAS CON ACTIVIDAD BIOLOGICA

MAT2010-17016

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación Fundamental no Orientada
Call Proyectos I+D
Call year 2010
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Proyectos de Investigación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Immobilization of polyoxometalates on tailored polymeric surfaces

  • Aguado-Ureta, Saioa
  • Rodríguez-Hernández, Juan
  • Campo, Adolfo del
  • Pérez-Álvarez, Leyre
  • Ruiz-Rubio, Leire
  • Vilas, José Luis
  • Artetxe, Beñat
  • Reinoso, Santiago
  • Gutiérrez Zorrilla, Juan M.
Herein we describe the preparation of hybrid polymer–inorganic interfaces by the immobilization of polyoxometalate nanoclusters on functionalized polymer surfaces. The polymeric surfaces were made of polystyrene-b-poly(acrylic acid)/polystyrene (PS-b-PAA/PS) blends by spin coating on a silicon wafer. The functionalization of the polymer film was obtained by interfacial migration of the amphiphilic block copolymer toward the interface upon water vapor annealing. The carboxylic acid functional groups contained in the PAA block were then employed to anchor the [LnIII(α-SiW11O39)]5− polyoxometalates (Ln: Ce, Er). This purpose was achieved by immersing the films in aqueous solutions of the in situ-formed inorganic nanoclusters. X-ray photoelectron and confocal Raman spectroscopies, together with atomic force microscopy, confirmed the immobilization of the inorganic species at the interface., This work has been financially supported by MINECO (grants MAT2010-17016 and MAT2010-21088-C03-01) and EJ/GV (IT477-10 and IT718-13; and ELKARTEK program (ACTIMAT)).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Immobilization of Polyoxometalates on Tailored Polymeric Surfaces

  • Aguado-Ureta, Saioa
  • Rodríguez-Hernández, Juan
  • Campo, Ángel Adolfo del
  • Perez-Álvarez, Leyre
  • Ruiz-Rubio, Leire
  • Vilas, José Luis
  • Artetxe, Beñat
  • Reinoso, Santiago
  • Gutiérrez-Zorrilla, Juan M.
Herein we describe the preparation of hybrid polymer–inorganic interfaces by the immobilization of polyoxometalate nanoclusters on functionalized polymer surfaces. The polymeric surfaces were made of polystyrene-<i>b</i>-poly(acrylic acid)/polystyrene (PS-<i>b</i>-PAA/PS) blends by spin coating on a silicon wafer. The functionalization of the polymer film was obtained by interfacial migration of the amphiphilic block copolymer toward the interface upon water vapor annealing. The carboxylic acid functional groups contained in the PAA block were then employed to anchor the [Ln<sup>III</sup>(α-SiW<sub>11</sub>O<sub>39</sub>)]<sup>5−</sup> polyoxometalates (Ln: Ce, Er). This purpose was achieved by immersing the films in aqueous solutions of the in situ-formed inorganic nanoclusters. X-ray photoelectron and confocal Raman spectroscopies, together with atomic force microscopy, confirmed the immobilization of the inorganic species at the interface., This work has been financially supported by MINECO (grants MAT2010-17016 and MAT2010-21088-C03-01) and EJ/GV (IT477-10 and IT718-13; and ELKARTEK program (ACTIMAT)). The authors thank UPV/EHU for financial support (UFI11/53). S.A.-U. is indebted to UPV/EHU for her pre-doctoral fellowship. Technical and human support provided by SGIker (UPV/EHU) is gratefully acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enzymatic Catalysis Combining the Breath Figures and Layer-by-Layer Techniques: Toward the Design of Microreactors

  • Sanz de León, Alberto
  • Garnier, T.
  • Jierry, L.
  • Boulmedais, F.
  • Muñoz-Bonilla, Alexandra
  • Rodríguez-Hernández, Juan
Herein, we report the fabrication of microstructured porous surfaces with controlled enzymatic activity by combining the breath figures and the layer-by-layer techniques. Two different types of porous surfaces were designed based on fluorinated and carboxylated copolymers in combination with PS, using poly(2,3,4,5,6-pentafluorostyrene)-b-polystyrene (PS5F<inf>31</inf>-b-PS<inf>21</inf>) and polystyrene-b-poly(acrylic acid) (PS<inf>19</inf>-b-PAA<inf>10</inf>) block copolymers, respectively. For comparative purposes, flat surfaces having similar chemistry were obtained by spin-coating. Poly(sodium 4-styrenesulfonate)/poly(allylamine hydrochloride) (PSS/PAH) multilayers incorporating alkaline phosphatase (ALP) were built on these porous surfaces to localize the enzyme both inside and outside of the pores using PS/PS5F<inf>31</inf>-b-PS<inf>21</inf> surfaces and only inside the pores on PS/PS<inf>19</inf>-b-PAA<inf>10</inf> surfaces. A higher catalytic activity of ALP (about three times) was obtained with porous surfaces compared to the flat ones. The catalysis happens specifically inside the holes of PS/PS<inf>19</inf>-b-PAA<inf>10</inf>surfaces, where ALP is located. This opens the route for applications in microreactors., This work was financially supported by the MINECO (Projects MAT2010-17016 and MAT2013-47902-C2-1-R (JRH)). A S.d.L. thanks the Ministerio de Educación for his FPU predoctoral fellowship. T.G. thanks FRC for financial support. A.M.-B. gratefully acknowledges the MINECO for her Ramon y Cajal.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Fabrication of honeycomb films from highly functional dendritic structures: Electrostatic force driven immobilization of biomolecules

  • Sanz de León, Alberto
  • Malhotra, Sunny
  • Molina, M.
  • Calderón, M.
  • Muñoz-Bonilla, Alexandra
  • Rodríguez-Hernández, Juan
Herein we report the preparation of honeycomb porous films for selective immobilization of biomolecules via the breath figure technique, a water-assisted micropatterning method. In particular, porous films are obtained from polymeric blends composed of high molecular weight polystyrene as the major component and an oligoglycerol based dendron covalently bonded to a hydrophobic polystyrene chain as the minor constituent. The multivalent dendritic architecture presents a well-defined molecular structure with controlled glycine arrays on their surfaces. Due to the mechanism of the breath figure formation, the resulting films exhibit an especial chemical distribution at the surfaces, in which the dendritic functional polymer is located preferentially in the interior of the pores while the rest of the polymer surface is mainly formed by the high molecular weight polystyrene. The high amount of amine functional groups inside the pores allowed the specific immobilization of biomolecules into the cavities by electrostatic interactions. In particular, the protein bovine serum albumin (BSA) and a DNA sequence were attached onto the films as a proof of concept. Besides, it was demonstrated that the density of biomolecules immobilized can be easily tuned by varying the content of the dendritic functional polymer in the film. These unique characteristics open new alternatives for the use of these platforms in biorelated applications including bio-recognition processes, or the understanding of cell-protein and even cell-DNA interactions on biofunctional microstructured polymeric supports., This work was financially supported by the MINECO (Projects MAT2010-17016 and MAT2013-47902-C2-1-R (JRH)). A. Muñoz- Bonilla gratefully acknowledges the MINECO for her Ramon y Cajal contract. A. S. de León thanks the Ministerio de Educación for his FPU predoctoral fellowship and DAAD for his short-term scholarship for research stays (A/13/ 71498). M. Calderón gratefully acknowledges financial support from the Bundesministerium für Bildung und Forschung (BMBF) through the NanoMatFutur award (13N12561), the Helmholtz Virtual Institute, Multifunctional Biomaterials for Medicine and the Freie Universität Focus Area Nanoscale. M. Molina acknowledges financial support from the Alexander von Humboldt Foundation
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Block copolymer surfactants in emulsion polymerization: Influence of the miscibility of the hydrophobic block on kinetics, particle morphology, and film formation

  • Muñoz-Bonilla, Alexandra
  • Ali, Syed Imran
  • Campo, Ángel Adolfo del
  • Fernández-García, Marta
  • Van Herk, Alex M.
  • Heuts, Johan P.A.
A brush type amphiphilic block copolymer of polystyrene-b-poly[poly(ethylene glycol) methyl ether methacrylate], PS40-b-PPEGMA70, obtained via ATRP was used as stabilizer in the emulsion polymerization of methyl methacrylate. It was shown that the incompatibility between the growing polymer particles of poly(methyl methacrylate) and the hydrophobic segment of the block copolymer surfactant (polystyrene) affects both the kinetics of the emulsion polymerization and the resulting particle morphologies. Because of the incompatibility of the two polymers, phase separation occurs, and the particle morphology changes from roughly spherical core–shell to more irregular with particles containing clusters of block copolymer surfactant as the amount of block copolymer surfactant increases. This in turn has an effect on the film formation, which results in turbid films. The results obtained from the emulsion polymerization of methyl methacrylate, the obtained hairy latex particles, and the film formation process were compared with those obtained in the emulsion polymerization of styrene where both the core of the particles and the hydrophobic segment of the block copolymer are the same polymer. In this case spherical and monodisperse particles are obtained irrespective of the block copolymer surfactant concentration, and transparent films are formed after annealing above the glass transition temperature. Copyright © 2011 American Chemical Society, This work was financially supported by the Foundation Emulsion Polymerization (SEP) and by the Ministerio de Ciencia e Innovación (Project MAT2010-17016). A. Muñoz Bonilla gratefully acknowledges MICINN-CSIC for her postdoctoral grant, and S. I. Ali gratefully acknowledges the financial support by the Higher Education Commission, Government of Pakistan, under the HEC-NUFFIC program, Peer reviewed