Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 90
Encontrada(s) 1 página(s)

Docta Complutense
Publication Artículo científico (JournalArticle)

FeCo Nanowire–Strontium Ferrite Powder Composites for Permanent Magnets with High-Energy Products

  • Guzmán Míguez, Jesús C
  • Ruiz Gómez, Sandra
  • Vicente-Arché, L. M.
  • Granados Miralles, Cecilia
  • Fernández-González, Claudia
  • Monpeán, Federico
  • García-Hernández, Mar
  • Erohkin, S
  • Berkov, D
  • Mishra, D
  • de Julián Fernández, César
  • Pérez García, Lucas
  • Quesada, Adrián
Due to the issues associated with rare-earth elements, there arises a strong need for magnets with properties between those of ferrites and rare-earth magnets that could substitute the latter in selected applications. Here, we produce a high remanent magnetization composite bonded magnet by mixing FeCo nanowire powders with hexaferrite particles. In the first step, metallic nanowires with diameters between 30 and 100 nm and length of at least 2 μm are fabricated by electrodeposition. The oriented as-synthesized nanowires show remanence ratios above 0.76 and coercivities above 199 kA/m and resist core oxidation up to 300 °C due to the existence of a >8 nm thin oxide passivating shell. In the second step, a composite powder is fabricated by mixing the nanowires with hexaferrite particles. After the optimal nanowire diameter and composite composition are selected, a bonded magnet is produced. The resulting magnet presents a 20% increase in remanence and an enhancement of the energy product of 48% with respect to a pure hexaferrite (strontium ferrite) magnet. These results put nanowire–ferrite composites at the forefront as candidate materials for alternative magnets for substitution of rare earths in applications that operate with moderate magnet performance.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

Self-assembly of iron oxide precursor micelles driven by magnetic stirring time in sol-gel coatings

  • Lopez Sanchez, J.
  • Serrano, Jose A.
  • Del Campo, A.
  • Abuín, Manuel
  • Salas Colera, Eduardo
  • Muñoz Noval, A.
  • Castro, German R.
  • De La Figuera, J.
  • Marco, J. F.
  • Marin, D.
  • Carmona, N.
  • Rodriguez De La Fuente, O.
The purpose of this work is to fabricate self-assembled microstructures by the sol–gel method and study the morphological, structural and compositional dependence of ε-Fe2O3 nanoparticles embedded in silica when glycerol (GLY) and cetyl-trimethylammonium bromide (CTAB) are added as steric agents simultaneously. The combined action of a polyalcohol and a surfactant significantly modifies the morphology of the sample giving rise to a different microstructure in each of the studied cases (1, 3 and 7 days of magnetic stirring time). This is due to the fact that the addition of these two compounds leads to a considerable increase in gelation time as GLY can interact with the alkoxide group on the surface of the iron oxide precursor micelle and/or be incorporated into the hydrophilic chains of CTAB. This last effect causes the iron oxide precursor micelles to be interconnected forming aggregates whose size and structure depend on the magnetic stirring time of the sol–gel synthetic route. In this paper, crystalline structure, composition, purity and morphology of the sol–gel coatings densified at 960 °C are examined. Emphasis is placed on the nominal percentage of the different iron oxides found in the samples and on the morphological and structural differences. This work implies the possibility of patterning ε-Fe2O3 nanoparticles in coatings and controlling their purity by an easy one-pot sol–gel method., The authors also acknowledge the Spanish Ministry of Industry, Economy and Competitiveness for financing the project MAT2015-65445-C2-1-R, MAT2017-86450-C4-1-R, MAT2015-67557-C2-1-P, by the Comunidad de Madrid S2013/MIT-2850 NANOFRONTMAG and H2020 AMPHIBIAN Project ID: 720853. The authors are also grateful to the BM25-SpLine staff for their valuable technical support beyond their duties and for the financial support from the Spanish Ministry of Science, Innovation and Universities (MICIU) and The Spanish National Research Council (CSIC) under Grant No. PIE 2010-6OE-013, The ESRF – The European Synchrotron, MICIU and CSIC are acknowledged for provision of synchrotron radiation facilities. A. S. acknowledges the financial support from the Comunidad de Madrid for an “Atracción de Talento Investigador” contract (No. 2017-t2/IND5395).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Geometrically defined spin structures in ultrathin Fe3O4 with bulk like magnetic properties

  • Ruiz-Gómez, Sandra
  • Pérez, Lucas
  • Mascaraque, Arantzazu
  • Quesada, Adrián
  • Prieto, Pilar
  • Palacio, Irene
  • Martín-García, Laura
  • Foerster, Michael
  • Aballe, Lucía
  • de la Figuera, Juan
  • AMPHIBIAN Project ID:720853
We have grown high quality magnetite microcrystals free from antiphase boundaries on Ru(0001) by reactive molecular beam epitaxy, conserving bulk magnetic properties below 20 nm thickness. Magnetization vector maps are obtained by X-ray spectromicroscopy and compared with micromagnetic simulations. The observed domain configurations are dictated purely by shape anisotropy, overcoming the possible influences of (magneto)crystalline anisotropy and defects, thus demonstrating the possibility of designing spin structures in ultrathin, magnetically soft magnetite at will., This work is supported by the Spanish Ministerio de Economía y Competitividad through Projects no. MAT2013-48009-C4-1-P, MAT2014-52477-C5-2-P, MAT2015-64110-C2-1-P, and MAT2015-64110-C2-2-P and by the European Comission through Project H2020 no. 720853 (Amphibian). These experiments were performed at the CIRCE beamline of the ALBA Synchrotron Light Facility. I. P. acknowledges the EU via the innovation program under grant agreement no. 696656 (GrapheneCore1-Graphene-based disruptive technologies)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A simple vibrating sample magnetometer for macroscopic samples

  • López-Domínguez, V.
  • Quesada, Adrián
  • Guzmán-Mínguez, J. C.
  • Moreno, L.
  • Lere, M.
  • Spottorno, J.
  • Giacomone, F.
  • Fernández Lozano, José Francisco
  • Hernando, Antonio
  • García García-Tuñón, Miguel Ángel
  • AMPHIBIAN Project ID:720853
We here present a simple model of a vibrating sample magnetometer (VSM). The system allows recording magnetization curves at room temperature with a resolution of the order of 0.01 emu and is appropriated for macroscopic samples. The setup can be mounted with different configurations depending on the requirements of the sample to be measured (mass, saturation magnetization, saturation field, etc.). We also include here examples of curves obtained with our setup and comparison curves measured with a standard commercial VSM that confirms the reliability of our device., This work has been supported by the Ministerio Español de Economia y Competitividad (MINECO), MAT2015-67557-C2-1-P, S2013/MIT-2850 NANOFRONTMAG, and by the European Commission through the project AMPHIBIAN (No. H2020-NMBP-2016-720853). V.L.D and M.A.G. acknowledge financial support from BBVA foundation., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Tesis doctoral (DoctoralThesis)

Magnetic Force Microscopy study of layered superconductors in vectorial magnetic fields

  • Correa Orellana, Alexandre
  • AMPHIBIAN Project ID:720853
This thesis is focused on the set-up and use of a cryogenic magnetic force microscope (MFM) in a three axis vector magnet. We have studied superconducting layered and quasi-two dimensional compounds. In particular, we address the superconducting properties of graphene deposited on an isotropic s-wave superconductor β−Bi2Pd, of a layered cuprate superconductor (BiSr2CaCu2O8), of a layered iron based material (Ca(Fe0.965Co0.035)2As2) and of the s-wave superconductor β−Bi2Pd., Por último, me gustaría agradecer a los proyectos de investigación Anisometric permanent hybrid magnets based on inexpensive and non-critical materials (AMPHIBIAN) (Ref. NMBP-03-2016) y Graphene Flagship (Grant No. 604391) financiados por la Unión Europea, gracias a los cuales he podido realizar mi tesis doctoral., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of wavelength, deposition temperature and substrate type on cobalt ferrite thin films grown by pulsed laser deposition

  • Oujja, Mohamed
  • Martín-García, Laura
  • Rebollar, Esther
  • Quesada, Adrián
  • García García-Tuñón, Miguel Ángel
  • Fernández Lozano, José Francisco
  • Marco, J.F.
  • de la Figuera, Juan
  • Castillejo, Marta
  • AMPHIBIAN Project ID:720853
In pulsed laser deposition, the laser irradiation wavelength and the substrate nature and temperature crucially affect the composition, crystallinity, structure and magnetic properties of the grown deposits. In this work, cobalt ferrite (CoFeO) thin films were deposited on Si (1 0 0) and SrTiO (1 0 0) single crystal substrates at room temperature and 770 K using laser wavelengths of 213, 532 and 1064 nm. The deposited films were characterized by atomic force microscopy to determine the surface morphology, by X-ray diffraction to examine their crystallinity, and by micro-Raman, scanning electron microscopy/energy-dispersive X-ray spectroscopy, X-ray photoelectron and Mössbauer spectroscopies to investigate their composition and stoichiometry. Magnetic characterization was carried out by superconducting quantum interference device magnetometry. At 770 K and 1064 nm, the films consisted of single-crystal CoFeO ((1 0 0) orientation) when grown on SrTiO, and of polycrystalline CoFeO when grown on Si. The composition of the films became more complex at shorter wavelengths as they contained magnetite and other minority phases in different concentrations. The crystalline quality of the films also decreased with decreasing wavelength even including superparamagnetic species. In general, for the same wavelength, the deposits obtained at room temperature were less crystalline than those produced with the substrate heated at 770 K., This research was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) through Projects CTQ2016-75880-P, CTQ2013-43086-P and MAT2015-64110-C2-1-P. M. O. and E. R. thank CSIC and RYC-2011-08069 (Ramón y Cajal Programme) for contracts. We thank CSIC Intramural Project PIE 201560E068 and financial support from the European Commission through the project NANOPYME FP7-NMP-2012-SMALL-6 NANOPYME (n° 310516) and AMPHIBIAN H2020-NMBP-2016-720853. W, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

AMPHIBIAN CSIC experimentaldata N RuizGomez 2018 XPEEM 20180312 75144 (v1)

  • Ruiz-Gómez, Sandra
  • Pérez, Lucas
  • Mascaraque, Arantzazu
  • Quesada, Adrián
  • Prieto, Pilar
  • Palacio, Irene
  • Martín-García, Laura
  • Foerster, Michael
  • Aballe, Lucía
  • de la Figuera, Juan
  • AMPHIBIAN Project ID:720853
Los datos se componen de grupos de 3 imágenes de microscopía XPEEM correspondientes a 5 islas nanométricas de magnetita. Cada isla está identificada en el nombre de los datos como i1, i2….i5, y las tres imágenes de cada isla con el identificador R0, R60 y R120., We have grown high quality magnetite microcrystals free from antiphase boundaries on Ru(0001) by reactive molecular beam epitaxy, conserving bulk magnetic properties below 20 nm thickness. Magnetization vector maps are obtained by X-ray spectromicroscopy and compared with micromagnetic simulations. The observed domain configurations are dictated purely by shape anisotropy, overcoming the possible influences of (magneto)crystalline anisotropy and defects, thus demonstrating the possibility of designing spin structures in ultrathin, magnetically soft magnetite at will., UE, programa H2020, Proyecto AMPHIBIAN n º 720853., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Approaching Ferrite-Based Exchange-Coupled Nanocomposites as Permanent Magnets

  • Granados-Miralles, Cecilia
  • Saura-Múzquiz, Matilde
  • Andersen, Henrik L.
  • Quesada, Adrián
  • Ahlburg, Jakob V.
  • Dippel, Ann-Christin
  • Canèvet, Emmanuel
  • Christensen, Mogens
  • AMPHIBIAN Project ID:720853
During the past decade, CoFe2O4 (hard)/Co–Fe alloy (soft) magnetic nanocomposites have been routinely prepared by partial reduction of CoFe2O4 nanoparticles. Monoxide (i.e., FeO or CoO) has often been detected as a byproduct of the reduction, although it remains unclear whether the formation of this phase occurs during the reduction itself or at a later stage. Here, a novel reaction cell was designed to monitor the reduction in situ using synchrotron powder X-ray diffraction (PXRD). Sequential Rietveld refinements of the in situ data yielded time-resolved information on the sample composition and confirmed that the monoxide is generated as an intermediate phase. The macroscopic magnetic properties of samples at different reduction stages were measured by means of vibrating sample magnetometry (VSM), revealing a magnetic softening with increasing soft phase content, which was too pronounced to be exclusively explained by the introduction of soft material in the system. The elemental compositions of the constituent phases were obtained from joint Rietveld refinements of ex situ high-resolution PXRD and neutron powder diffraction (NPD) data. It was found that the alloy has a tendency to emerge in a Co-rich form, inducing a Co deficiency on the remaining spinel phase, which can explain the early softening of the magnetic material., The authors thank financial support from the European Commission through the NANOPYME (FP7-SMALL-310516) and AMPHIBIAN (H2020-NMBP-2016-720853) projects. Financial support from the Danish National Research Foundation (Center for Materials Crystallography, DNRF-93) and the Danish Center for Synchrotron and Neutron Science (DanScatt) is gratefully acknowledged. Parts of this research were carried out at PETRA III at DESY, a member of the Helmholtz Association (HGF). We thank Jozef Bednarcik for assistance in using beamline P02.1. This work is based on experiments performed at the Swiss spallation neutron source SINQ, Paul Scherrer Institute, Villigen, Switzerland. This project has received funding from the European Union’s Seventh Framework Programme for research, technological development, and demonstration under the NMI3-II Grant 283883., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

AMPHIBIAN CSIC experimental data insitu exsitu PXRD NPD [Dataset]

  • Granados-Miralles, Cecilia
  • Saura-Múzquiz, Matilde
  • Andersen, Henrik L.
  • Quesada, Adrián
  • Ahlburg, Jakob V.
  • Dippel, Ann-Christin
  • Canèvet, Emmanuel
  • Christensen, Mogens
  • AMPHIBIAN Project ID:720853
The different datasets are divided in folders as follows: 1. In situ experiments. The article is based on 7 different in situ experiments: a. 400C_5mLmin_fr10; b. 400C_10mLmin_fr23; c. 400C_20mLmin_fr6; d. 400C_30mLmin_fr12; e. 300C_10mLmin_fr4; f. 350C_10mLmin_fr18; g. 500C_10mLmin_fr9. (Due to space limitations, only the data corresponding to the experiment c were uploaded to this repository. The remaining data are accessible through private communication with Cecilia Granados-Miralles, c.granados.miralles@icv.csic.es). The folder “c_400C_20mLmin_fr6” contains in situ PXRD data (time resolution=5 s) collected during reduction at the temperature and gas flow indicated in the folder name (i.e. 400C_20mLmin stands for 400 °C and 20 mL/min). The temperature indicated in the file names is the set temperature but the sample temperature is the indicated in the folder name (i.e. Tset430 led to a sample temperature of 400 °C). Heating started on the frame indicated in the folder name (i.e. fr6 stands for frame 6). This folder contains 2D-diffraction images in *.tif format, which may be opened with the Python-based program for on-the-fly data processing and exploration of two-dimensional X-ray diffraction area detector data, available for free download at http://www.clemensprescher.com/programs/dioptas., 2. Ex situ experiments: a. PXRD_Cu 1D-diffraction patterns in *.dat format. 3 space-/tab-separated columns: 2theta angle (degree), Diffracted Intensity (arbitrary units), σ (arbitrary units); b. PXRD_Co Same as previous; c. NPD_DMC 1D-diffraction patterns in *.dat format. The first line indicates: narrowest 2theta angle measured, measurement step, widest 2theta angle. The following values are the diffracted intensities recorded for each 2theta step; d. NPD_HRPT; Same as previous e. VSMHysteresis loops: Magnetic moment as a function of a variable applied field in *.dat format. Several comma-separated columns of which the relevant are the 4th, 5th, and 6th columns, which contain: Magnetic Field (Oe), Moment (emu), M. Std. Err. (emu)., During the past decade, CoFe2O4 (hard)/Co–Fe alloy (soft) magnetic nanocomposites have been routinely prepared by partial reduction of CoFe2O4 nanoparticles. Monoxide (i.e., FeO or CoO) has often been detected as a byproduct of the reduction, although it remains unclear whether the formation of this phase occurs during the reduction itself or at a later stage. Here, a novel reaction cell was designed to monitor the reduction in situ using synchrotron powder X-ray diffraction (PXRD). Sequential Rietveld refinements of the in situ data yielded time-resolved information on the sample composition and confirmed that the monoxide is generated as an intermediate phase. The macroscopic magnetic properties of samples at different reduction stages were measured by means of vibrating sample magnetometry (VSM), revealing a magnetic softening with increasing soft phase content, which was too pronounced to be exclusively explained by the introduction of soft material in the system. The elemental compositions of the constituent phases were obtained from joint Rietveld refinements of ex situ high-resolution PXRD and neutron powder diffraction (NPD) data. It was found that the alloy has a tendency to emerge in a Co-rich form, inducing a Co deficiency on the remaining spinel phase, which can explain the early softening of the magnetic material., European Comission through FP7 program, NANOPYME project, grant agreement no. 310516. European Comission through H2020 program, AMPHIBIAN Project, grant agreement no. 720853. Danish National Research Foundation through Center for Materials Crystallography, DNRF-93. Danish Center for Synchrotron and Neutron Science through DanScatt. European Comission through FP7 program, NMI3-II project, grant agreement no. 283883., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Structure and magnetism of ultrathin nickel-iron oxides grown on Ru(0001) by high-temperature oxygen-assisted molecular beam epitaxy

  • Mandziak, Anna
  • de la Figuera, Juan
  • Ruiz-Gómez, Sandra
  • Delgado Soria, Guiomar
  • Pérez, Lucas
  • Prieto P.
  • Quesada, Adrián
  • Foerster M.
  • Aballe, Lucía
  • AMPHIBIAN Project ID:720853
We demonstrate the preparation of ultrathin Fe-rich nickel ferrite (NFO) islands on a metal substrate. Their nucleation and growth are followed in situ by low-energy electron microscopy (LEEM). A comprehensive characterization is performed combining LEEM for structural characterization and PEEM (PhotoEmission Electron Microscopy) with synchrotron radiation for chemical and magnetic analysis via X-ray Absorption Spectroscopy and X-ray Magnetic Circular Dichroism (XAS-PEEM and XMCD-PEEM, respectively). The growth by oxygen-assisted molecular beam epitaxy takes place in two stages. First, islands with the rocksalt structure nucleate and grow until they completely cover the substrate surface. Later three-dimensional islands of spinel phase grow on top of the wetting layer. Only the spinel islands show ferromagnetic contrast, with the same domains being observed in the Fe and Ni XMCD images. The estimated magnetic moments of Fe and Ni close to the islands surface indicate a possible role of the bi-phase reconstruction. A significant out-of-plane magnetization component was detected by means of XMCD-PEEM vector maps., Spanish Ministry of Economy and Competitiveness through Projects No. MAT2014-52477-C5-2-P, MAT2015-64110-C2-1-P, and MAT2015-64110-C2-2-P and by the European Comission through Project H2020 No. 720853 (Amphibian)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Exchange-spring behavior below the exchange length in hard-soft bilayers in multidomain configurations

  • Quesada, Adrián
  • Delgado Soria, Guiomar
  • Pascual, Laura
  • Aragón Sánchez, Ana María
  • Marín, Pilar
  • Granados-Miralles, Cecilia
  • Foerster, M.
  • Aballe, Lucía
  • Prieto, J. E.
  • de la Figuera, Juan
  • Fernández Lozano, José Francisco
  • Prieto, P.
  • AMPHIBIAN Project ID:720853
Exchange-coupled hard-soft biphase magnets are technologically relevant systems in that they enable tailoring the magnetization reversal process. Here, exchange-spring behavior is observed in CoFe2O4/FeCo bilayers for soft thicknesses as thin as 2 nm, at least four times below the exchange length of the system. This result is in contrast with the accepted theory for spring magnets that states that the exchange length defines the critical thickness below which both magnetic phases should be rigidly coupled. In combination with micromagnetic calculations, this surprising observation is understood as a consequence of the dominance of domain-wall propagation in the soft phase during the reversal process, so far unaccounted for in theoretical descriptions. Our results emphasize the need to expand the existing spring theory from coherent rotation to domain-wall related processes in multidomain configurations in order to accurately design magnetic heterostructures with controllable reversal., Spanish Ministerio de Ciencia, Innovación y Universidades through Projects No. MAT2017-86450-C4-1-R, No. MAT2015-64110-C2-1-P, No. MAT2015-64110-C2-2-P, and No. IS2017-82415-R and by the European Commission through H2020 Project No. 720853 (AMPHIBIAN) and FP7 Project No. 310516 (NANOPYME)., Peer reviewed, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Bulk and surface characterisation of micrometer-thick cobalt ferrite films grown by IR PLD

  • Sánchez-Arenillas, M.
  • Oujja, Mohamed
  • Moutinho, Fernando
  • de la Figuera, Juan
  • Cañamares, María Vega
  • Quesada, Adrián
  • Castillejo, Marta
  • Marco, J.F.
  • AMPHIBIAN Project ID:720853
We have studied micrometer-thick cobalt ferrite films deposited on Si (1 0 0) single crystal substrates by nanosecond pulsed laser deposition at 1064 nm.The thickness of the deposited films (1.3 μm) was monitored by AFM. The chemical and structural characterisation of the films was carried out by Raman spectroscopy and transmission Mössbauer spectroscopy at 300 and 26 K. For comparison purposes, transmission Mössbauer data at these two temperatures were also recorded from a commercial cobalt ferrite powder and the home-made target used to grow the films. The surface characterisation was performed by X-ray Photoelectron Spectroscopy (XPS) and Integral Low Energy Electron Spectroscopy (ILEEMS). XPS showed Co and Fe to be present as Co and Fe, as expected for cobalt ferrite. The Raman spectra showed the lines characteristic of cobalt ferrite. The Mössbauer spectra, both in the transmission and backscattering modes, were fitted to two sextets whose hyperfine parameters are in good agreement with those expected from Fe cations occupying the tetrahedral and octahedral sites in the spinel-related structure. No significant differences were observed in the relative areas of the two sextets in the transmission and ILEEMS spectra, suggesting that the cation distribution at the surface and the bulk are not too different. However, the relative areas of the two components changed drastically with temperature both in the spectra of the films as in those recorded from the cobalt ferrite standards. We discuss the possible origin of the evolution with temperature of those relative areas., This research was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) through Projects CTQ2016-75880-Pand MAT2015-64110-C2-1-P and by the European Commission through the project AMPHIBIAN H2020-NMBP-2016-720853, Peer reviewed, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enhancement of magnetic properties through morphology control of SrFe12O19 nanocrystallites

  • Eikeland, Anna Zink
  • Stingaciu, Marian
  • Mamakhel, Aref Hasen
  • Saura-Múzquiz, Matilde
  • Christensen, Mogens
  • AMPHIBIAN Project ID:720853
[EN] Nanocrystallites of the permanent magnetic material SrFe12O19 were synthesised using a conventional sol-gel (CSG) and a modified sol-gel (MSG) synthesis route. In the MSG synthesis, crystallite growth takes place in a solid NaCl matrix, resulting in freestanding nanocrystallites, as opposed to the CSG synthesis, where the produced nanocrystals are strongly intergrown. The resulting nanocrystallites from both methods exhibit similar intrinsic magnetic properties, but significantly different morphology and degree of aggregation. The nanocrystallites were compacted into dense pellets using a Spark Plasma Sintering (SPS) press, this allows investigating the influence of crystallite morphology and the alignment of the nanocrystallites on the magnetic performance. A remarkable correlation was observed between the crystallites morphology and their ability to align in the compaction process. Consequently, a significant enhancement of the maximum energy product was obtained after SPS for the MSG prepared sample (22.0 kJ/m3), compared to CSG sample, which achieved an energy product of 11.6 kJ/m3., This work was supported by the Danish Research Council for Technology and Production Sciences through a Sapere Aude grant (Improved Permanent Magnets through Nanostructuring), the Danish National Research Foundation (Center for Materials Crystallography DNRF93), and the EU H2020 project AMPHIBIAN (720853)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Optimization of magnetic properties in fast consolidated SrFe12O19 nanocrystallites

  • Stingaciu, Marian
  • Eikeland, Anna Zink
  • Gjørup, Frederik Holm
  • Deledda, Stefano
  • Christensen, Mogens
  • AMPHIBIAN Project ID:720853
Electronic supplementary information (ESI) available. See DOI: 10.1039/c9ra02440a, [EN] The magnetic properties of SrFe12O19 nanocrystallites produced by hydrothermal synthesis and consolidated by Spark Plasma Sintering (SPS) were optimized by varying the compaction parameters: sintering time, sintering temperature, uniaxial pressure or pre-compaction in a magnetic field. Highly textured compacts with a high degree of crystallite alignment were produced. Qualitative and quantitative textural information was obtained based on X-ray diffraction pole figure measurements. The optimum sintering conditions, relating the degree of alignment and bulk magnetic properties, were identified based on the resulting magnetic properties. It was found that one must strike a balance between the degree of crystallite alignment for high saturation magnetisation and coercivity (Hc) to gain the highest energy product (BHmax). It was found that the coercive field drops when the crystallite alignment increases. This was particularly pronounced in the case of magnetically pre-aligned powders prior to SPS, where Hc and BHmax decreased as the pellets became increasingly textured. The best BHmax value of 29(4) kJ m−3 was found for the sample sintered at 950 °C for 2 minutes with an applied pressure of 100 MPa for a powder pre-aligned in an applied field of 0.55 T. The results presented here show the potential of SPS consolidation of SrFe12O19 with high relative densities and emphasize the effect of the degree of alignment on the decrease of coercive field and its influence on the magnetic performance., This work was partly funded by the European Commission through the Research and Innovation project AMPHIBIAN, grant agreement H2020-NMBP-2016-720853. Support is also greatly acknowledged from the Independent Research Fund Denmark project-1 (Magnetic Nanocomposites). M. C. wishes to express his gratitude towards the Carlsbergfondet for a Distinguished Associate Professor Fellowship. The Danish National Research Foundation (Center for Materials Crystallography, DNRF93) is likewise thanked for support and access to instrumental facilities. Affiliation with the Center for Integrated Materials Research (iMAT) at Aarhus University is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Self-assembly of iron oxide precursor micelles driven by magnetic stirring time in sol–gel coatings

  • López-Sánchez, Jesús
  • Serrano Rubio, Aída
  • Campo, Ángel Adolfo del
  • Abuín, M.
  • Salas, Eduardo
  • Muñoz-Noval, A.
  • Castro, Germán R.
  • de la Figuera, Juan
  • Marco, J.F.
  • Marín, Pilar
  • Carmona, N.
  • Rodríguez de la Fuente, Óscar
  • AMPHIBIAN Project ID:720853
[EN] The purpose of this work is to fabricate self-assembled microstructures by the sol–gel method and study the morphological, structural and compositional dependence of 3-Fe2O3 nanoparticles embedded in silica when glycerol (GLY) and cetyl-trimethylammonium bromide (CTAB) are added as steric agents simultaneously. The combined action of a polyalcohol and a surfactant significantly modifies the morphology of the sample giving rise to a different microstructure in each of the studied cases (1, 3 and 7 days of magnetic stirring time). This is due to the fact that the addition of these two compounds leads to a considerable increase in gelation time as GLY can interact with the alkoxide group on the surface of the iron oxide precursor micelle and/or be incorporated into the hydrophilic chains of CTAB. This last effect causes the iron oxide precursor micelles to be interconnected forming aggregates whose size and structure depend on the magnetic stirring time of the sol–gel synthetic route. In this paper, crystalline structure, composition, purity and morphology of the sol–gel coatings densified at 960 ºC are examined. Emphasis is placed on the nominal percentage of the different iron oxides found in the samples and on the morphological and structural differences. This work implies the possibility of patterning 3-Fe2O3 nanoparticles in coatings and controlling their purity by an easy one-pot sol–gel method., Spanish Ministry of Industry, Economy and Competitiveness for financing the project MAT2015-65445-C2-1-R, MAT2017-86450-C4-1-R, MAT2015-67557-C2-1-P, by the Comunidad de Madrid S2013/MIT-2850 NANOFRONTMAG and H2020 AMPHIBIAN Project ID: 720853. The authors are also grateful to the BM25-SpLine staff for their valuable technical support beyond their duties and for the financial support from the Spanish Ministry of Science, Innovation and Universities (MICIU) and The Spanish National Research Council (CSIC) under Grant No. PIE 2010- 6OE-013, The ESRF – The European Synchrotron, MICIU and CSIC are acknowledged for provision of synchrotron radiation facilities. A. S. acknowledges the Financial support from the Comunidad de Madrid for an “Atracción de Talento Investigador” contract (No. 2017-t2/IND5395)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Magnetic small-angle neutron scattering

  • Mühlbauer, Sebastian
  • Honecker, Dirk
  • Périgo, Élio A.
  • Bergner, Frank
  • Disch, Sabrina
  • Heinemann, André
  • Erokhin, Sergey
  • Berkov, Dmitry
  • Leighton, Chris
  • Eskildsen, Morten Ring
  • Michels, Andreas
  • AMPHIBIAN Project ID:720853
[EN] Small-angle neutron scattering (SANS) is one of the most important techniques for microstructure determination, being utilized in a wide range of scientific disciplines, such as materials science, physics, chemistry, and biology. The reason for its great significance is that conventional SANS is probably the only method capable of probing structural inhomogeneities in the bulk of materials on a mesoscopic real-space length scale from roughly 1 to 300 nm. Moreover, the exploitation of the spin degree of freedom of the neutron provides SANS with a unique sensitivity to study magnetism and magnetic materials at the nanoscale. As such, magnetic SANS ideally complements more real-space and surface-sensitive magnetic imaging techniques, e.g., Lorentz transmission electron microscopy, electron holography, magnetic force microscopy, Kerr microscopy, or spin-polarized scanning tunneling microscopy. This review summarizes the recent applications of the SANS method to study magnetism and magnetic materials. This includes a wide range of materials classes from nanomagnetic systems such as soft magnetic Fe-based nanocomposites, hard magnetic Nd-Fe-B-based permanent magnets, magnetic steels, ferrofluids, nanoparticles, and magnetic oxides to more fundamental open issues in contemporary condensed matter physics such as skyrmion crystals, noncollinear magnetic structures in noncentrosymmetric compounds, magnetic or electronic phase separation, and vortex lattices in type-II superconductors. Special attention is paid not only to the vast variety of magnetic materials and problems where SANS has provided direct insight, but also to the enormous progress made regarding the micromagnetic simulation of magnetic neutron scattering., Deutsche Forschungsgemeinschaft (Project No. BE 2464/10-3), the EU-FP7 project “NANOPYME” (310516), and the EU Horizon-2020 project “AMPHIBIAN” (720853). M. R. E. was supported by the U.S. Department of Energy, Office of Basic Energy Sciences, under Award No. DE-SC0005051. F. B. thanks Andreas Ulbricht for fruitful discussions over the many years. C. L. was funded by the U.S. Department of Energy through the University of Minnesota Center for Quantum Materials under DE-FG02-06ER46275 and DESC-0016371. S. D. acknowledges financial support from the German Research Foundation (DFG Emmy Noether Grant No. DI 1788/2-1)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tuning the Néel temperature in an antiferromagnet: the case of NixCo1−xO microstructures

  • Mandziak, Anna
  • Delgado Soria, Guiomar
  • Prieto, J. E.
  • Prieto Recio, Pilar
  • Granados-Miralles, Cecilia
  • Quesada, Adrián
  • Foerster, Michael
  • Aballe, Lucía
  • de la Figuera, Juan
  • AMPHIBIAN Project ID:720853
We show that it is possible to tune the Néel temperature of nickel(II)-cobalt(II) oxide films by changing the Ni to Co ratio. We grow single crystalline micrometric triangular islands with tens of nanometers thickness on a Ru(0001) substrate using high temperature oxygen-assisted molecular beam epitaxy. Composition is controlled by adjusting the deposition rates of Co and Ni. The morphology, shape, crystal structure and composition are determined by low-energy electron microscopy and diffraction, and synchrotron-based x-ray absorption spectromicroscopy. The antiferromagnetic order is observed by x-ray magnetic linear dichroism. Antiferromagnetic domains up to micrometer width are observed., This work is supported by the Spanish Agencia Estatal de Investigación (MCIU/AEI/FEDER, EU)) through Projects Nos MAT2015-64110-C2-1-P, MAT2015-64110-C2-2-P, RTI2018-095303-B-C51, and RTI2018-095303-B-C53, by the European Commission through Project H2020 No. 720853 (Amphibian) and by the Comunidad de Madrid through Project. NANOMAGCOST-CM P2018/NMT-4321. These experiments were performed at the CIRCE beamline of the ALBA Synchrotron Light Facility. A.M. acknowledges funding via a CSIC-Alba agreement., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

AMPHIBIAN AU-IFE experimental dataset SrFe12O19 SPS RSCAdv2019 [Dataset]

  • Stingaciu, Marian
  • Eikeland, Anna Zink
  • AMPHIBIAN Project ID:720853
  • Gjørup, Frederik Holm
  • Deledda, Stefano
  • Christensen, Mogens
  • AMPHIBIAN Project ID:720853
The work contains 5 figures and the datasets corresponding to each figure are included in separate folders in form of .xy format or .png format. 1) The folder “Fig1” contains the “Fig1.png” which illustrates the SPS sintering conditions regarding the heating rate, dwelling time and the applied uniaxial pressure. The lower part of the figure is an illustration of the setup used at the pre/alignment of particles in an external magnetic field up to 0.55 Tesla. 2) The folder “Fig2” contains the powder X-ray data measured for different Sr/Fe molar ratios (“SrFe1I2_data.xy”, “SrFe1I4_data.xy”, “SrFe1I6_data.xy”,” SrFe1I8_data.xy) and the calculated data based on Rietveld refinement by using FullProf (“SrFe1I2_calculated.xy”, “SrFe1I4_ calculated xy”, “SrFe1I6_ calculated.xy”,” SrFe1I8_ calculated.xy”). The .xy files contain two tab delimited columns. The first column represent the 2theta diffraction angle and the second column gives the arbitrary intensities. “Figure2.png” gives the weight percentages of the different chemical phases detected in the powders while the lower part of the figure gives the crystallites sizes calculated by FullProf program. 3) The folder “Fig3” contains the magnetization data in a form of hysteresis loops measured at room temperature. Each file contains 3 columns. First column represent the applied external magnetic field (Oe units), the second column is the emu while the third column represents the emu/grams units. 4) The folder “Fig4” contains the oriented volume fraction data. Each file is a 2 columns data. The tilting angle k is given in the first column while the oriented volume fraction is given in the second column. “Fig4.png” show the pole figures obtained from x-ray diffraction measurements. 5) The folder “Fig5” gives the data repository for hysteresis loops measured at room temperature. Here the effect of external magnetic field influence prior compaction was studied. Four data sets are included here. “H_0.15T “, “H_0.45T”, “H_0.55T” and “H_0.15T_t2min. The columns are the same as described for folder “Fig3”., [EN] The magnetic properties of SrFe12O19 nanocrystallites produced by hydrothermal synthesis and consolidated by Spark Plasma Sintering (SPS) were optimized by varying the compaction parameters: sintering time, sintering temperature, uniaxial pressure or pre-compaction in a magnetic field. Highly textured compacts with a high degree of crystallite alignment were produced. Qualitative and quantitative textural information was obtained based on X-ray diffraction pole figure measurements. The optimum sintering conditions, relating the degree of alignment and bulk magnetic properties, were identified based on the resulting magnetic properties. It was found that one must strike a balance between the degree of crystallite alignment for high saturation magnetisation and coercivity (Hc) to gain the highest energy product (BHmax). It was found that the coercive field drops when the crystallite alignment increases. This was particularly pronounced in the case of magnetically pre-aligned powders prior to SPS, where Hc and BHmax decreased as the pellets became increasingly textured. The best BHmax value of 29(4) kJ m−3 was found for the sample sintered at 950 °C for 2 minutes with an applied pressure of 100 MPa for a powder pre-aligned in an applied field of 0.55 T. The results presented here show the potential of SPS consolidation of SrFe12O19 with high relative densities and emphasize the effect of the degree of alignment on the decrease of coercive field and its influence on the magnetic performance., European Commission through the Research and Innovation project AMPHIBIAN, grant agreement H2020-NMBP-2016-720853. Support is also greatly acknowledged from the Independent Research Fund Denmark project-1 (Magnetic Nanocomposites). M. C. wishes to express his gratitude towards the Carlsbergfondet for a Distinguished Associate Professor Fellowship. The Danish National Research Foundation (Center for Materials Crystallography, DNRF93) is likewise thanked for support and access to instrumental facilities. Affiliation with the Center for Integrated Materials Research (iMAT) at Aarhus University is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Strontium hexaferrite platelets: a comprehensive soft X-ray absorption and Mössbauer spectroscopy study

  • Delgado Soria, Guiomar
  • Jenus, P.
  • Marco, J.F.
  • Mandziak, Anna
  • Sánchez-Arenillas, M.
  • Moutinho, Fernando
  • Prieto, J. E.
  • Prieto, P.
  • Cerdá, Jorge I.
  • Tejera-Centeno, César
  • Gallego, Silvia
  • Foerster, Michael
  • Aballe, Lucía
  • Valvidares, M.
  • Vasili, H.B.
  • Pereiro, E.
  • Quesada, Adrián
  • de la Figuera, Juan
  • AMPHIBIAN Project ID:720853
Platelets of strontium hexaferrite (SrFeO, SFO), up to several micrometers in width, and tens of nanometers thick have been synthesized by a hydrothermal method. They have been studied by a combination of structural and magnetic techniques, with emphasis on Mössbauer spectroscopy and X-ray absorption based-measurements including spectroscopy and microscopy on the iron-L edges and the oxygen-K edge, allowing us to establish the differences and similarities between our synthesized nanostructures and commercial powders. The Mössbauer spectra reveal a greater contribution of iron tetrahedral sites in platelets in comparison to pure bulk material. For reference, high-resolution absorption and dichroic spectra have also been measured both from the platelets and from pure bulk material. The O-K edge has been reproduced by density functional theory calculations. Out-of-plane domains were observed with 180° domain walls less than 20 nm width, in good agreement with micromagnetic simulations., This work is supported by the Spanish Ministry of Economy and Competitiveness through Projects MAT2015-64110-C2-1-P, MAT2015-64110-C2-2-P, MAT2015-66888-C3-1-R and by the European Commission through Project H2020 No. 720853 (Amphibian). These experiments were performed at the CIRCE, MISTRAL and BOREAS beamlines of the ALBA synchrotron Light Facility. G.D.S. acknowledges the European Youth Employement Initiative and the Autonomous Community of Madrid for a one-year fellowship. Slovenian Research Agency is acknowledged for funding the research program Ceramics and complementary materials for advanced engineering and biomedical applications (P2-0087), CEMM, JSI for the use of TEM.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Size-dependent spatial magnetization profile of manganese-zinc ferrite Mn0.2Zn0.2Fe2.6O4 nanoparticles

  • Bersweiler, Mathias
  • Bender, Philipp
  • Vivas, Laura G.
  • Albino, Martin
  • Petrecca, Michele
  • Mühlbauer, Sebastian
  • Erokhin, Sergey
  • Berkov, Dmitry
  • Sangregorio, Claudio
  • Michels, Andreas
  • AMPHIBIAN Project ID:720853
[EN] We report the results of an unpolarized small-angle neutron-scattering (SANS) study on Mn-Zn ferrite (MZFO) magnetic nanoparticles with the aim to elucidate the interplay between their particle size and the magnetization configuration. We study different samples of single-crystalline MZFO nanoparticles with average diameters ranging between 8 to 80 nm, and demonstrate that the smallest particles are homogeneously magnetized. However, with increasing nanoparticle size, we observe the transition from a uniform to a nonuniform magnetization state. Field-dependent results for the correlation function confirm that the internal spin disorder is suppressed with increasing field strength. The experimental SANS data are supported by the results of micromagnetic simulations, which confirm an increasing inhomogeneity of the magnetization profile of the nanoparticle with increasing size. The results presented demonstrate the unique ability of SANS to detect even very small deviations of the magnetization state from the homogeneous one., The authors acknowledge the Heinz Maier-Leibnitz Zentrum for provision of neutron beamtime. We thank Jörg Schwarz and Jörg Schmauch (Universität des Saarlandes) for the technical support with the hydraulic press and for the SEM investigations. It is also a pleasure to thank Dirk Honecker for fruitful discussions. This research was supported by the EU-H2020 AMPHIBIAN Project No. 720853. P.B. and A.M.thank the Fonds National de la Recherche of Luxembourg for financial support (CORE ANS4NCC grant)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

High Density Nanostructured Soft Ferrites Prepared by High Pressure Field Assisted Sintering Technique

  • Petrecca, Michele
  • Albino, Martin
  • Tredici, I. G
  • Anselmi-Tamburini, Umberto
  • Passaponti, M.
  • Caneschi, A.
  • Sangregorio, Claudio
  • AMPHIBIAN Project ID:720853
[EN] The synthesis of highly compacted, nanostructured soft magnets is highly desirable due to their promising properties for the development of electronic devices working at frequency higher than 2 MHz. In this work we investigated the potentiality of High Pressure Field Assisted Sintering Technique (HP-FAST). To this aim, we first synthesized soft Mn–Zn ferrite magnetic nanoparticles (MNPs) through an easy-scalable, eco-friendly strategy based on aqueous co-precipitation in basic media, starting from transition metal chlorides. Powder X-ray diffraction (PXRD) and Transmission Electron Microscopy (TEM) analyses evidenced the formation of crystalline nanoparticles with the cubic spinel structure and average crystal size of 7.5 nm. Standard magnetometric measurements showed a saturation magnetization value of ca. 56 emu/g and no magnetic irreversibility at room temperature. The MNPs were then compacted applying an uniaxial pressure over a toroidal shaped die. In order to obtain a material with a density close to the bulk one, the as-prepared green toroids underwent either a classic sintering treatment, obtaining a microstructured system, or to High Pressure Field Assisted Sintering Technique (HP-FAST), which allowed for preserving the nanostructure. The relative permeability and core losses of the toroidal samples were evaluated in the frequency range 1–2 MHz using an in-house built setup. The comparison of the behavior of samples obtained by the two different sintering approaches showed the nanostructured samples had a much smaller relative magnetic permeability (ten times lower than the microstructured sample) and, consequently, higher core losses. However, when samples with similar μr were compared, a significant decrease of core losses at the larger frequencies was observed. This result suggests HP-FAST is a very promising approach to prepare high density nanostructured soft magnetic materials., Research supported by H2020 AMPHIBIAN (n. 720853) and Regione Lombardia INSTM, “Motorsport” projects., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

AMPHIBIAN CNR experimental data MnZn-ferrite-SANS PhysRevB2019. AMPHIBIAN GNRL simulated data MnZn-ferrite-SANS PhysRevB2019 [Dataset]

  • Bersweiler, Mathias
  • Bender, Philipp
  • Vivas, Laura G.
  • Albino, Martin
  • Petrecca, Michele
  • Mühlbauer, Sebastian
  • Erokhin, Sergey
  • Berkov, Dmitry
  • Sangregorio, Claudio
  • Michels, Andreas
  • AMPHIBIAN Project ID:720853
Dataset description: EXPERIMENTAL DATA folder "XRD data" containes the XRD patterns of all the samples presented in the manuscript folder "Magnetic data" containes the M(H) curves of all the samples presented in the manuscript measured at room temperature in a field range of � 5 T folder "TEM data" containes the TEM images of all the samples presented in the manuscript SIMULATED DATA prb_mzfo_fig10.png Microstructures used in the micromagnetic simulations. The volume fraction of the particle phase was set to 80% in all computations. The simulation volume approximately 300 � 300 � 300 nm^3 is constant in the simulations (mesh size: 4 nm). prb_mzfo_fig11.png Applied field dependence of the quantity |M|/M_s for different average particle sizes. ASCII data file for this data set is in "prb_mzfo_absm.dat", where the first column mu0H (mT) and the following ones are |M|/M_S for 14, 26, 38, 50, 62 and 74 nm crystallites systems correspondingly. Inset: Corresponding normalized magnetization curves. ASCII data file for this data set is in "prb_mzfo_mz.dat", where the first column mu0H (mT) and the following ones are M_z/M_s for 14, 26, 38, 50, 62 and 74 nm crystallites systems correspondingly. prb_mzfo_fig12.png Particle-size-dependent evolution of the parameter |M|/M_s for each magnetic particle as a function of the applied magnetic field. ASCII data file for this data set is in "prb_mzfo_absm14nmALLstep100.dat", "prb_mzfo_absm38nmALLstep5.dat" and "prb_mzfo_absm74nmALLstep1.dat" for for 14, 38, and 74 nm crystallites systems correspondingly. The first column mu0H (mT) and the following ones are |M|/M_s for every crystallite. Snapshots of spin structures at selected fields, where the largest deviations from the uniform magnetization state are observed., [EN] We report the results of an unpolarized small-angle neutron-scattering (SANS) study on Mn-Zn ferrite (MZFO) magnetic nanoparticles with the aim to elucidate the interplay between their particle size and the magnetization configuration. We study different samples of single-crystalline MZFO nanoparticles with average diameters ranging between 8 to 80 nm, and demonstrate that the smallest particles are homogeneously magnetized. However, with increasing nanoparticle size, we observe the transition from a uniform to a nonuniform magnetization state. Field-dependent results for the correlation function confirm that the internal spin disorder is suppressed with increasing field strength. The experimental SANS data are supported by the results of micromagnetic simulations, which confirm an increasing inhomogeneity of the magnetization profile of the nanoparticle with increasing size. The results presented demonstrate the unique ability of SANS to detect even very small deviations of the magnetization state from the homogeneous one., UE, programa H2020, Proyecto AMPHIBIAN n º 720853., Dataset description: >>> EXPERIMENTAL DATA folder "XRD data" containes the XRD patterns of all the samples presented in the manuscript folder "Magnetic data" containes the M(H) curves of all the samples presented in the manuscript measured at room temperature in a field range of � 5 T folder "TEM data" containes the TEM images of all the samples presented in the manuscript >>> SIMULATED DATA prb_mzfo_fig10.png Microstructures used in the micromagnetic simulations. The volume fraction of the particle phase was set to 80% in all computations. The simulation volume approximately 300 � 300 � 300 nm^3 is constant in the simulations (mesh size: 4 nm). prb_mzfo_fig11.png Applied field dependence of the quantity |M|/M_s for different average particle sizes. ASCII data file for this data set is in "prb_mzfo_absm.dat", where the first column mu0H (mT) and the following ones are |M|/M_S for 14, 26, 38, 50, 62 and 74 nm crystallites systems correspondingly. Inset: Corresponding normalized magnetization curves. ASCII data file for this data set is in "prb_mzfo_mz.dat", where the first column mu0H (mT) and the following ones are M_z/M_s for 14, 26, 38, 50, 62 and 74 nm crystallites systems correspondingly. prb_mzfo_fig12.png Particle-size-dependent evolution of the parameter |M|/M_s for each magnetic particle as a function of the applied magnetic field. ASCII data file for this data set is in "prb_mzfo_absm14nmALLstep100.dat", "prb_mzfo_absm38nmALLstep5.dat" and "prb_mzfo_absm74nmALLstep1.dat" for for 14, 38, and 74 nm crystallites systems correspondingly. The first column mu0H (mT) and the following ones are |M|/M_s for every crystallite. Snapshots of spin structures at selected fields, where the largest deviations from the uniform magnetization state are observed., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

AMPHIBIAN CSIC experimental data SrFe12O19 platelets SciRep2018. AMPHIBIAN CSIC simulated data SrFe12O19 platelets SciRep2018. [Dataset]

  • Delgado Soria, Guiomar
  • Jenuš, Petra
  • Marco, J.F.
  • Mandziak, Anna
  • Sánchez-Arenillas, M.
  • Moutinho, Fernando
  • Prieto, J. E.
  • Prieto, P.
  • Cerdá, Jorge I.
  • Tejera-Centeno, César
  • Gallego, Silvia
  • Foerster, M.
  • Aballe, Lucía
  • Valvidares, M.
  • Vasili, H.B.
  • Pereiro, E.
  • Quesada, Adrián
  • de la Figuera, Juan
  • AMPHIBIAN Project ID:720853
[EN] Platelets of strontium hexaferrite (SrFeO, SFO), up to several micrometers in width, and tens of nanometers thick have been synthesized by a hydrothermal method. They have been studied by a combination of structural and magnetic techniques, with emphasis on Mössbauer spectroscopy and X-ray absorption based-measurements including spectroscopy and microscopy on the iron-L edges and the oxygen-K edge, allowing us to establish the differences and similarities between our synthesized nanostructures and commercial powders. The Mössbauer spectra reveal a greater contribution of iron tetrahedral sites in platelets in comparison to pure bulk material. For reference, high-resolution absorption and dichroic spectra have also been measured both from the platelets and from pure bulk material. The O-K edge has been reproduced by density functional theory calculations. Out-of-plane domains were observed with 180° domain walls less than 20 nm width, in good agreement with micromagnetic simulations., UE, programa H2020, Proyecto AMPHIBIAN n º 720853, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

AMPHIBIAN CNR experimental data MnZn ferrite HP-FAST_JNanosciNanotechnol2019 [Dataset]

  • Petrecca, Michele
  • Albino, Martin
  • Tredici, I. G
  • Anselmi-Tamburini, Umberto
  • Passaponti, M.
  • Caneschi, A.
  • Sangregorio, Claudio
  • AMPHIBIAN Project ID:720853
Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

AMPHIBIAN AU experimental-data SrFe12O19-SPS SciRep2018 [Dataset]

  • Eikeland, Anna Zink
  • Stingaciu, Marian
  • Mamakhel, Aref Hasen
  • Saura-Múzquiz, Matilde
  • Christensen, Mogens
  • AMPHIBIAN Project ID:720853
UE, programa H2020, Proyecto AMPHIBIAN n º 720853., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

AMPHIBIAN_CSIC_experimental-data_NiCoO-NeelT_SciRep2019 [Dataset]

  • Mandziak, Anna
  • Delgado Soria, Guiomar
  • Prieto, J. E.
  • Prieto Recio, Pilar
  • Granados-Miralles, Cecilia
  • Quesada, Adrián
  • Foerster, Michael
  • Aballe, Lucía
  • de la Figuera, Juan
  • AMPHIBIAN Project ID:720853
UE, programa H2020, Proyecto AMPHIBIAN n º 720853, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

AMPHIBIAN CSIC experimental-data NiFe2O4-MBE_SciRep2018 [Dataset]

  • Mandziak, Anna
  • de la Figuera, Juan
  • Ruiz-Gómez, Sandra
  • Delgado Soria, Guiomar
  • Pérez, Lucas
  • Prieto P.
  • Quesada, Adrián
  • Foerster M.
  • Aballe, Lucía
  • AMPHIBIAN Project ID:720853
Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

AMPHIBIAN CSIC experimental data Spring bilayers_PhysRevB2018. AMPHIBIAN_CSIC_simulated-data_Spring-bilayers_PhysRevB2018 [Dataset]

  • Quesada, Adrián
  • Delgado Soria, Guiomar
  • Pascual, Laura
  • Aragón Sánchez, Ana María
  • Marín, Pilar
  • Granados-Miralles, Cecilia
  • Foerster, M.
  • Aballe, Lucía
  • Prieto, J. E.
  • de la Figuera, Juan
  • Fernández Lozano, José Francisco
  • Prieto, P.
  • AMPHIBIAN Project ID:720853
Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

AMPHIBIAN UCM experimental data Epsilon solgel RSCAdv2019

  • López-Sánchez, Jesús
  • Serrano Rubio, Aída
  • Campo, Ángel Adolfo del
  • Abuín, M.
  • Salas, Eduardo
  • Muñoz-Noval, A.
  • Castro, Germán R.
  • de la Figuera, Juan
  • Marco, J.F.
  • Marín, Pilar
  • Carmona, N.
  • Rodríguez de la Fuente, Óscar
  • AMPHIBIAN Project ID:720853
Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

AMPHIBIAN CSIC experimental data CoFe2O4-PLD_ApplSurfSci2018 [Dataset]

  • Oujja, Mohamed
  • Martín-García, Laura
  • Rebollar, Esther
  • Quesada, Adrián
  • García García-Tuñón, Miguel Ángel
  • Fernández Lozano, José Francisco
  • Marco, J.F.
  • de la Figuera, Juan
  • Castillejo, Marta
  • AMPHIBIAN Project ID:720853
Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

AMPHIBIAN CSIC experimental data CoFe2O4-PLD_ApplSurfSci2019 [Dataset]

  • Sánchez-Arenillas, M.
  • Oujja, Mohamed
  • Moutinho, Fernando
  • de la Figuera, Juan
  • Cañamares, María Vega
  • Quesada, Adrián
  • Castillejo, Marta
  • Marco, J.F.
  • AMPHIBIAN Project ID:720853
UE, programa H2020, Proyecto AMPHIBIAN n º 720853., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

AMPHIBIAN GNRL simulated data SANS review_RevModPhys2019 [Dataset]

  • Mühlbauer, Sebastian
  • Honecker, Dirk
  • Périgo, Élio A.
  • Bergner, Frank
  • Disch, Sabrina
  • Heinemann, André
  • Erokhin, Sergey
  • Berkov, Dmitry
  • Leighton, Chris
  • Eskildsen, Morten Ring
  • Michels, Andreas
  • AMPHIBIAN Project ID:720853
UE, programa H2020, Proyecto AMPHIBIAN n º 720853, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Direct and inverse spin Hall effects: Zeeman energy

  • Hernando, Antonio
  • García García-Tuñón, Miguel Ángel
  • Gálvez, F.
  • Guinea, Francisco
  • AMPHIBIAN Project ID:720853
It is shown that magnetic forces as the force exerted on electron spins at rest, account for both the transverse spin imbalance typical of spin Hall effect and the transverse charge imbalance associated with pure spin currents (inverse spin Hall effect). Considering that for stationary currents the laboratory reference frame, and those for which the spin up and spin down carriers are at rest, are inertial systems one can easily find the forces exerted by the lattice on both spin sub-bands, as well as the force between sub-bands., The authors are indebted to P. Echenique, J. Hirsch, V. Golovach, A. Arnau and J. M. Rojo for many fruitful discussions. This work has been supported by the Spanish Ministry of Innovation, Science and Technology and Spanish Ministry of Economy and Competitiveness through Research Projects MAT2015-67557-C2-1-P, MAT2017-86450-C4-1-R S2013/MIT-2850 NANOFRONTMAG, RTI2018-095856-B-C21, by the European Commission AMPHIBIAN (H2020-NMBP-2016-720853) and by the Comunidad de Madrid S2018/NMT-4321 NANOMAGCOST-CM., Peer reviewed, preprint
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Spin imbalance of charge carriers induced by an electric current

  • Hernando, Antonio
  • Gálvez, Fernando
  • García García-Tuñón, Miguel Ángel
  • Guinea, Francisco
  • AMPHIBIAN Project ID:720853
[EN] We analyze the contribution of the inhomogeneous magnetic field induced by an electrical current to the spin Hall effect in metals. The Zeeman coupling between the field and the electron spin leads to a spin dependent force, and to spin accumulation at the edges. We compare the effect of this relativistic correction to the electron dynamics to the features induced by the spin-orbit interaction. The effect of current induced magnetic fields on the spin Hall effect can be comparable to the extrinsic contribution from the spin-orbit interaction, although it does not require the presence of heavy elements with a strong spin-orbit interaction., This work was supported by the Spanish Ministry of Innovation, Science and Technology and Spanish Ministry of Economy and Competitiveness through Research Projects MAT2015-67557-C2-1-P, MAT2017-86450-C4-1-R, S2013/MIT-2850 NANOFRONTMAG and by the European Commission AMPHIBIAN (H2020-NMBP-2016-720853)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Correlation between microstructure, cation distribution and magnetism in Ni1−xZnxFe2O4 nanocrystallites

  • AMPHIBIAN Project ID:720853
  • Hölscher, Jennifer
  • Andersen, Henrik L.
  • Saura-Múzquiz, Matilde
  • Garbus, Pelle Gorm
  • Mogens Christensen
Hydrothermal synthesis of magnetic ferrite spinel nanoparticles, with composition Ni1−xZnxFe2O4 resulted in sizes below 27 nm in the entire composition range (x = 0.0–1.0). The nanoparticles were analyzed with regard to their microstructure, crystal structure and magnetic properties. Combined Rietveld refinements of powder X-ray diffraction (PXRD) and neutron powder diffraction data (NPD), were used to test and compare different models for the cation distribution between the tetrahedral and octahedral sites in the spinel structure. The structural modeling reveals that the Ni2+ ions have a strong preference for the octahedral coordination irrespective of composition, which is consistent with the inverse spinel structure of bulk NiFe2O4. However, the Zn2+ ions are found to partly occupy octahedral sites, despite their preference for tetrahedral coordination in the bulk. Annealing of the nanoparticles in air for 4 h at 600 °C causes a transition towards a more bulk-like cation configuration. The powder diffraction data were complemented by transmission electron microscopy (TEM), scanning transmission electron microscopy with a high-angle annular dark field detector (STEM-HAADF), energy-dispersive X-ray spectroscopy (EDS) and vibrating sample magnetometry (VSM). Quantitative analysis of EDS spectra shows that the desired stoichiometries were obtained. The highest saturation magnetization, of 66 Am2 kg−1, is achieved for Ni0.6Zn0.4Fe2O4. Furthermore, the saturation magnetization obtained from VSM was compared to the results from atomic magnetic refinements based on the neutron powder diffraction data. The present study confirms that the cation distributions observed in nanocrystalline ZnFe2O4 and NiFe2O4 are maintained in the mixed spinel Ni1−xZnxFe2O4., he authors would like to thank financial support from the European Commission through the AMPHIBIAN (H2020-NMBP-2016-720853) project and the Innovation Fund Denmark (Green Chemistry for Advanced Materials, GCAM-4107-00008B). Support from the Danish National Research Foundation (Center for Materials Crystallography, DNRF-93), and the Danish Center for Synchrotron and Neutron Science (DanScatt) is gratefully acknowledged. We would like to thank Antonio Cervellino, Hermann Emerich, and Denis Cheptiakov for assistance during beamtime at MS@SLS, Paul Scherrer Institute (PSI), Switzerland, the Swiss-Norwegian beamlines (SNBL), BM31@ESRF, France, and HRPT@SINQ, Paul Scherrer Institute (PSI), Switzerland, respectively. Affiliation with the Center for Integrated Materials Research (iMAT) at Aarhus University is gratefully acknowledged. JH acknowledges affiliation with the Sino-Danish Center for Education and Research (SDC)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A real-time XAS PEEM study of the growth of cobalt iron oxide on Ru(0001)

  • AMPHIBIAN Project ID:720853
  • Ruiz-Gómez, Sandra
  • Mandziak, Anna
  • Prieto, J. E.
  • Aristu, M.
  • Trapero, E. M.
  • Delgado Soria, Guiomar
  • Quesada, Adrián
  • Foerster, M.
  • Aballe, Lucía
  • de la Figuera, Juan
[EN] The growth of mixed cobalt-iron oxides on Ru(0001) by high-temperature oxygen-assisted molecular beam epitaxy has been monitored in real time and real space by x-ray absorption photoemission microscopy. The initial composition is a mixed Fe–Co(II) oxide wetting layer, reflecting the ratio of the deposited materials. However, as subsequent growth of three dimensional spinel islands nucleating on this wetting layer takes place, the composition of the oxide in the wetting layer changes as iron is transferred into the spinel islands. The composition of the islands themselves also changes during growth., This work was supported by the Spanish Ministry of Science, Innovation and Universities through Project Nos. RTI2018-095303-B-C51, RTI2018-095303-B-C52, and RTI2018-095303-BC53 (MCIU/AIE/FEDER, EU), by the European Commission through H2020 Project No. 720853 (Amphibian), by the CSIC PIE Project No. 190344, and by the Regional Government of Madrid through Project No. P2018/NMT-4321 (NANOMAGCOST). These experiments were performed at the CIRCE beamline of the ALBA Synchrotron Light Facility. A.M. acknowledges support from the CSIC–ALBA agreement., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Influence of the manganese substitution on the cation distribution and magnetic structure of the spinel-related LiFe1-xMn1 + xO4 (x = 0.00, 0.25, 0.50, 0.75) system

  • Gracia García, Mercedes
  • Gancedo, J. R.
  • Gautier, J.L.
  • de la Figuera, Juan
  • Marco, J.F.
  • AMPHIBIAN Project ID:720853
13 pags., 4 figs., 3 tabs. -- PACS 82.80.Ej . 82.33.Pt . 75.47.Lx . 78.55.Hx . 82.80.Pv. 61.10.Nz . 61.66.Fn. -- This article is part of the Topical Collection on Proceedings of the 16th Latin American Conference on the Applications of the Mössbauer Effect (LACAME 2018), 18-23 November 2018, Santiago de Chile, Chile Edited by Carmen Pizarro Arriagada, We report a modified synthesis for lithium manganese ferrites LiFe Mn O (x = 0.00, 0.25, 0.50, 0.75) based on the thermal decomposition of nitrates which produces purer materials when compared to other synthesis methods. The different oxidation states of the various cations and their preferences for particular crystal sites within the spinel-related structure lead to a complex cation distribution and magnetic properties which depend strongly on the composition. The large, almost complete, lithium occupancy of the tetrahedral sites in the spinel structure for particular compositions and the concomitant occurrence of unusual oxidation states of iron show how the synthesis method can be tailored to obtain materials which can have promising applications in the field of lithium-containing batteries., This work was supported by CSIC-USACH cooperation program and Fondecyt (Chile) 1050178 and Dicyt 51831 EM_DAS projects. Financial support from the Spanish Ministry of Science, Innovation and Universities under project MAT2015-64110-C2-1-P, the Comunidad Autónoma de Madrid NANOMAGCOST-CM project with Ref. P2018/NMT-4321 and the European Commission through Project H2020 No. 720853 (Amphibian) is gratefully acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Magnetite and the Verwey transition, from γ-rays to low-energy electrons

  • de la Figuera, Juan
  • Marco, J.F.
  • AMPHIBIAN Project ID:720853
PACS 75.50.Gg · 76.80.+y · 75.70.i · 71.30.+h .-- This article is part of the Topical Collection on Proceedings of the 16th Latin American Conference on the Applications of the M¨ossbauer Effect (LACAME 2018), 18–23 November 2018, Santiago de Chile, Chile, Magnetite, a semiconducting ferrimagnetic iron spinel with a metal-insulator phase transition, the Verwey transition, has long been the subject of Mössbauer spectroscopy studies, which continue today. We review the current status of the understanding of the Mössbauer spectra of magnetite. Furthermore, magnetite is a very attractive material in current topics such as spintronics. In this particular subject, to determine the behavior of magnetic domains is paramount, and the changes ocurring on the near surface region upon undergoing the Verwey transition are relevant. In order to advance in this area, we have incorporated some new techniques, namely microscopy observations made with low-energy electrons. These observations can be performed upon changing the temperature, and can provide magnetic contrast through the use of spin-polarized electrons. By this means, we have observed the ferroelastic transformation associated with the Verwey transition, discovered an order-disorder transition of the (001) surface of magnetite and observed the changes in the magnetic domains on the same surface by changing the temperature. Low-energy electrons also are the key to the Mössbauer experiments of magnetite films and surfaces, with the promise of providing surface-sensitive spatially resolved Mössbauer spectra., This research was partially supported by the Spanish Ministry of Economy and Competitiveness No. MAT2015-64110-C2-1-P, the Comunidad Autónoma de Madrid NANOMAGCOST-CM project with Ref. P2018/NMT-4321, the European Commission through Project H2020 No. 720853 (Amphibian) and the Chilean FONDECYT Project No. 1161117., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Expanding the tunability and applicability of exchange-coupled/decoupled magnetic nanocomposites

  • Granados-Miralles, Cecilia
  • Quesada, Adrián
  • Saura-Múzquiz, Matilde
  • Andersen, Henrik L.
  • Fernández Lozano, José Francisco
  • Christensen, Mogens
  • AMPHIBIAN Project ID:720853
[EN] CoFe2O4/Co–Fe magnetic composites are usually prepared through partial reduction of CoFe2O4, which often yields monoxides (i.e., FeO, CoO) as secondary phases. Since these compounds are paramagnetic at ambient conditions, the presence of a small amount of monoxide is generally downplayed in the literature, and the possible effects on the magnetic properties are simply ignored. However, the present study shows that even a low concentration of monoxide results in decoupling of the soft and hard magnetic phases, which inevitably leads to a deterioration of the magnetic properties. Additionally, it is confirmed that a partial reduction of CoFe2O4 is a suitable method to produce CoFe2O4/Co–Fe nanocomposites, provided that the treatment is well controlled with respect to duration, temperature and flow of reductant. A monoxide-free nanocomposite was produced and its magnetic properties evaluated both at room and low temperature. Our model system exemplifies the potential of exchange-coupling (and decoupling) as a tool to tune the magnetic properties of a material within a relatively wide range of values, thus widening its spectrum of potential applications., C. G.-M. and A. Q. have contributed equally to this work. The authors would like to thank financial support from the European Commission through the AMPHIBIAN project (H2020-NMBP-2016-720853), the Danish National Research Foundation (Center for Materials Crystallography, DNRF-93), and the Spanish Ministerio de Ciencia, Innovación y Universidades (RTI2018-095303-A-C52). C. G.-M. acknowledges financial support from the Spanish Ministerio de Ciencia, Innovación y Universidades through the Juan de la Cierva Program (FJC2018- 035532-I). Authors from Aarhus University gratefully acknowledge affiliation with the Center for Integrated Materials Research (iMAT) at Aarhus University. We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Influence of the growth conditions on the magnetism of SrFe12O19thin films and the behavior of Co/SrFe12O19bilayers

  • Delgado Soria, Guiomar
  • Marco, J.F.
  • Mandziak, Anna
  • Sánchez-Cortés, Santiago
  • Sánchez-Arenillas, M.
  • Prieto, J. E.
  • Dávalos, J.Z.
  • Foerster, M.
  • Aballe, Lucía
  • López-Sánchez, Jesús
  • Guzmán-Mínguez, J. C.
  • Granados-Miralles, Cecilia
  • de la Figuera, Juan
  • Quesada, Adrián
  • AMPHIBIAN Project ID:720853
11 pags., 12 figs. 1 tab., SrFe12O19 (SFO) films grown on Si (100) substrates by radio-frequency magnetron sputtering have been characterized in terms of composition, structural and magnetic properties by a combination of microscopy, diffraction and spectroscopy techniques. Mössbauer spectroscopy was used to determine the orientation of the films magnetization, which was found to be controlled by both the sputtering power and the thickness of the films. Additionally, the coupling between the SFO films and a deposited cobalt overlayer was studied by means of synchrotron-based spectromicroscopy techniques. A structural coupling at the SFO/Co interface is suggested to account for the expetimental observations. Micromagnetic simulations were performed in order to reproduce the experimental behaviour of the system., This work is supported by the Spanish Ministry of Science, Innovation and Universities through Projects RTI2018- 095303-B-C51, RTI2018-095303-B-C53 and RTI2018- 095303-A-C52 (MCIU/AIE/FEDER,EU) and by the European Comission through Project H2020 No. 720853 (Amphibian) and by the Regional Government of Madrid through project S2018-NMT-4321. C.G-M. acknowledges financial support from MICINN through the “Juan de la Cierva” program (FJC2018-035532-I). Technical support of the technical staff of CIRCE beamline of the ALBA Synchrotron Light Facility is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Unraveling the mechanism of the one-pot synthesis of exchange coupled Co-based nano-heterostructures with a high energy product

  • Muzzi, Beatrice
  • Albino, Martin
  • Innocenti, Claudia
  • Petrecca, Michele
  • Cortigiani, Brunetto
  • Julián Fernández, César de
  • Bertoni, Giovanni
  • Fernández-Pacheco, Rodrigo
  • Ibarra, Alfonso
  • Marquina, Clara
  • Ibarra, M. Ricardo
  • Sangregorio, Claudio
  • AMPHIBIAN Project ID:720853
The development of reproducible protocols to synthesize hard/soft nano-heterostructures (NHSs) with tailored magnetic properties is a crucial step to define their potential application in a variety of technological areas. Thermal decomposition has proved to be an effective tool to prepare such systems, but it has been scarcely used so far for the synthesis of Co-based metal/ferrite NHSs, despite their intriguing physical properties. We found a new approach to prepare this kind of nanomaterial based on a simple one-pot thermal decomposition reaction of metal-oleate precursors in the high boiling solvent docosane. The obtained NHSs are characterized by the coexistence of Co metal and Co doped magnetite and are highly stable in an air atmosphere, thanks to the passivation of the metal with a very thin oxide layer. The investigation of the influence of the metal precursor composition (a mixed iron–cobalt oleate), of the ligands (oleic acid and sodium oleate) and of the reaction time on the chemical and structural characteristics of the final product, allowed us to rationalize the reaction pathway and to determine the role of each parameter. In particular, the use of sodium oleate is crucial to obtain a metal phase in the NHSs. In such a way, the one-pot approach proposed here allows the fine control of the synthesis, leading to the formation of stable, high performant, metal/ferrite NHSs with tailored magnetic properties. For instance, the room temperature maximum energy product was increased up to 19 kJ m−3 by tuning the Co content in the metal precursor., This work was supported by EU-H2020 AMPHIBIAN Project (no. 720853) and by European Union's Horizon 2020 research and innovation programme under grant agreement no. 823717-ESTEEM3., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Combining high temperature sample preparation and in-situ magnetic fields in XPEEM

  • Mandziak, Anna
  • de la Figuera, Juan
  • Prieto, J. E.
  • Prat, Jordi
  • Foerster, Michael
  • Aballe, Lucía
  • AMPHIBIAN Project ID:720853
5 pags., 5 figs., We present a custom-made sample holder system for use in Elmitec Low Energy and PhotoEmission Electron Microscopes. It consists of two different sample holder bodies: one with a filament for high temperature measurements (up to more than 1500 K) and the other with integrated electromagnets for the in-situ application of in-plane/out-of-plane small magnetic fields. The sample is placed on a platelet which can be transferred between the two holders. This opens up new possibilities for the preparation of samples at high temperatures and investigation of their behavior under applied magnetic fields without leaving the ultra high vacuum system., This work is supported by the Spanish Agencia Estatal deInvestigación (AEI) through Projects no. MAT2015-64110-C2-1-P,MAT2015-64110-C2-2-P, RTI2018-095303-B-C51, and RTI2018-095303-B-C53, by the European Commission through Project H2020no. 720853 (Amphibian) and by the Comunidad de Madrid throughProject. NANOMAGCOST-CM P2018/NMT-4321. These experimentswere performed at the CIRCE beamline of the ALBA Synchrotron LightFacility. A. M. acknowledges funding via a CSIC-Alba agreement.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Different spin axis orientation and large antiferromagnetic domains in Fe-doped NiO/Ru(0001) epitaxial films

  • Mandziak, Anna
  • Delgado Soria, Guiomar
  • Prieto, J. E.
  • Foerster, Michael
  • de la Figuera, Juan
  • Aballe, Lucía
  • AMPHIBIAN Project ID:720853
9 pags., 7 figs., We present a spatially resolved X-ray magnetic dichroism study of high-quality, in situ grown nickel oxide films. NiO thin films were deposited on a Ru(0001) substrate by high temperature oxygen-assisted molecular beam epitaxy. We found that by adding a small amount of Fe, the growth mode can be modified in order to promote the formation of micron-sized, triangular islands. The morphology, shape, crystal structure and composition are determined by low-energy electron microscopy and diffraction, and synchrotron based X-ray absorption spectromicroscopy. The element specific XMLD measurements reveal strong antiferromagnetic contrast at room temperature and domains with up to micron sizes, reflecting the high structural quality of the islands. By means of vectorial magnetometry, the spin axis orientation was determined with nanometer spatial resolution, and found to depend on the relative orientation of the film and substrate lattices., This work is supported by the Spanish Agencia Estatal de Investigación (AEI) through Projects No. MAT2015-64110-C2-1- P, MAT2015-64110-C2-2-P, RTI2018-095303-B-C51, and RTI2018-095303-B-C53, by the European Commission through Project H2020 No. 720853 (Amphibian) and by the Comunidad de Madrid through Project. NANOMAGCOST-CM P2018/ NMT-4321. These experiments were performed at the CIRCE beamline of the ALBA Synchrotron Light Facility. A. M. acknowledges funding via a CSIC-Alba agreement.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

FeCo nanowire−strontium ferrite powder composites for permanent magnets with high-energy products

  • Guzmán-Mínguez, J. C.
  • Ruiz-Gómez, Sandra
  • Vicente-Arche, L. M.
  • Granados-Miralles, Cecilia
  • Fernández-González, Claudia
  • Mompean, Federico J.
  • García-Hernández, Mar
  • Erohkin, S.
  • Berkov, Dmitry
  • Mishra, D.
  • de Julián Fernández, C.
  • Fernández Lozano, José Francisco
  • Pérez, L.
  • Quesada, Adrián
  • AMPHIBIAN Project ID:720853
Due to the issues associated with rare-earth elements, there arises a strong need for magnets with properties between those of ferrites and rare-earth magnets that could substitute the latter in selected applications. Here, we produce a high remanent magnetization composite bonded magnet by mixing FeCo nanowire powders with hexaferrite particles. In the first step, metallic nanowires with diameters between 30 and 100 nm and length of at least 2 μm are fabricated by electrodeposition. The oriented as-synthesized nanowires show remanence ratios above 0.76 and coercivities above 199 kA/m and resist core oxidation up to 300 °C due to the existence of a >8 nm thin oxide passivating shell. In the second step, a composite powder is fabricated by mixing the nanowires with hexaferrite particles. After the optimal nanowire diameter and composite composition are selected, a bonded magnet is produced. The resulting magnet presents a 20% increase in remanence and an enhancement of the energy product of 48% with respect to a pure hexaferrite (strontium ferrite) magnet. These results put nanowire−ferrite composites at the forefront as candidate materials for alternative magnets for substitution of rare earths in applications that operate with moderate magnet performance., We would like to thank Dr. Vić tor Fuertes for his advice on the processing of the bonded magnets. This work is supported by the Spanish Ministerio de Economía y Competitividad y Ministerio de Ciencia e Innovación (Project Nos. MAT2017- 86450-C4-1-R, MAT2015-64110-C2-1-P, MAT2015-64110- C2-2-P, MAT2017-87072-C4-2-P, RTI2018-095303-A-C52, and FIS2017-82415-R) and by the European Commission through Project H2020 (No. 720853; AMPHIBIAN). C.G.-M. acknowledges financial support from MICINN through the “Juan de la Cierva” Program (FJC2018-035532-I). A.Q. acknowledges financial support from MICINN through the “Ramón y Cajal” Program (RYC-2017-23320). The work also is funded by the Regional Government of Madrid (Project S2018/ NMT-4321; NANOMAGCOST)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Boosting the coercivity of SrFe12O19 nanocrystalline powders obtained using the citrate combustion synthesis method

  • Guzmán-Mínguez, J. C.
  • Moreno Arche, L.
  • Granados-Miralles, Cecilia
  • López-Sánchez, Jesús
  • Marín, Pilar
  • Fernández Lozano, José Francisco
  • Quesada, Adrián
  • AMPHIBIAN Project ID:720853
Strontium hexaferrite nanocrystalline powders were synthesized using a citrate combustion method and subsequently subjected to post-synthesis processing with the aim of tuning the micro-nanostructure to improve the magnetic properties. Firstly, the synthesis thermal treatments were optimized in order to minimize the formation of secondary phases, mainly hematite. Secondly, the as-synthesized powders were conditioned by a two-step process: ball milling in wet medium (ethanol) and high-speed mixing. The final processed powders exhibited a saturation magnetization of 74 emu g-1 and a coercivity of 6450 Oe. Following a low-temperature combustion synthesis, the coercivity is one of the largest values reported for strontium ferrites. The combination of the two-step conditioning procedure results in a useful methodology to obtain SrFe12O19 nanocrystalline powders with competitive properties. The morphological, structural and magnetic properties of the processed material make it a promising candidate for hard-soft ferrite-based composite magnets, where large coercivity values are highly desirable., This work is supported by the Spanish Ministerio de Ciencia e Innovación through Project Nos. MAT2017-86450-C4-1-R, RTI2018-095303-B-C51, RTI2018-095303-B-C53, RTI2018-095303-A-C52, and FIS2017-82415-R and through the Ramón y Cajal Contract RYC-2017-23320; and by the European Commission through Project H2020 No. 720853 (AMPHIBIAN). The work is funded as well by the Regional Government of Madrid through Project S2018/NMT-4321 (NANOMAGCOST). C G-M acknowledges financial support from MICINN through the ‘Juan de la Cierva’ Program (FJC2018-035532-I)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Uncorrelated magnetic domains in decoupled SrFe12O19/Co hard/soft bilayers

  • Delgado Soria, Guiomar
  • Granados-Miralles, Cecilia
  • Mandziak, Anna
  • Jenus, P.
  • Saura-Múzquiz, Matilde
  • Christensen, Mogens
  • Foerster, Michael
  • Aballe, Lucía
  • Fernández Lozano, José Francisco
  • de la Figuera, Juan
  • Quesada, Adrián
  • AMPHIBIAN Project ID:720853
8 pags., 5 figs., Composites of magnetically hard and soft phases are present in multiple and diverse applications, ranging from bulk permanent magnets in motors and generators to state-of-the-art recording media devices. The nature of the magnetic coupling between the hard and soft phases is of great technological relevance, as the macroscopic properties of the functional composite material ultimately depend on the atomic-scale interactions between phases. In this work, the hard/soft bilayer system SrFeO/Co has been studied based on photoemission electron microscopy combined with x-ray absorption and magnetic circular dichroism. Our experiments show that the magnetization of the hard magnetic oxide has a direction perpendicular to the layer plane, whereas the magnetization of the soft metallic overlayer remains in-plane. As a consequence, the magnetic domain patterns observed for the hard and soft phases are very different and completely uncorrelated to one another, indicating that no soft spins align with the hard phase by pure magnetodipolar arguments. The results are understood as the consequence of an absence of exchange-coupling between phases, in a scenario in which the shape anisotropy of the soft layer overcomes the Zeeman energy of the perpendicular magnetic field generated by the hard ferrite. Micromagnetic simulations of our system predict that low degrees of exchange-coupling effectively prevent substantial softening of the composite and lead to the alignment of soft and hard magnetic moments. A strategy thus emerges for the development of future hard-soft magnets, based on minimizing the degree of exchange-coupling while avoiding complete uncoupling., This work is supported by the Spanish Ministerio de Economía y Competitividad (MINECO) through Projects no. MAT2017-86450-C4-1-R, RTI2018-095303-B-C51, RTI2018-095303-B-C53, RTI2018-095303-A-C52, and FIS2017-82415-R and by the European Comission through Project H2020 no. 720853 (AMPHIBIAN). The work is funded as well by the Regional Government of Madrid through Project S2018/NMT-4321 (NANOMAGCOST). C.G.-M. acknowledges financial support from Spanish Ministerio de Ciencia e Innovación (MICINN) through the 'Juan de la Cierva' Program (FJC2018-035532-I). Spanish Ministerio de Economía y Competitividad (MINECO)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Imán permanente, procedimiento de obtención y usos

  • Guzmán-Mínguez, J. C.
  • Moreno Arche, L.
  • Quesada, Adrián
  • Fernández Lozano, José Francisco
  • Mompean, Federico J.
  • García-Hernández, Mar
  • Pérez, Lucas
  • Ruiz-Gómez, Sandra
  • Berkov, Dmitry
  • Erokhin, Sergey
  • AMPHIBIAN Project ID:720853
Imán permanente, procedimiento de obtención y usos. La presente invención se refiere a un imán permanente que comprende partículas magnéticas duras y una estructura magnética blanda con relación de aspecto mayor o igual a 3 y con estructura magnética de monodominio. Además, la presente invención se refiere al procedimiento de obtención de dicho imán y al uso de dicho imán como parte de un generador o un vehículo automóvil. La presente invención se encuadra en el sector de los materiales magnéticos y sus aplicaciones industriales., Peer reviewed, Consejo Superior de Investigaciones Científicas (España), Universidad Complutense de Madrid, General Numerics Research Lab E.V, A1 Solicitud de patente con informe sobre el estado de la técnica
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Permanent magnet, method for obtaining same and uses, Imán permanente, procedimiento de obtención y usos

  • Guzmán-Mínguez, J. C.
  • Moreno Arche, L.
  • Quesada, Adrián
  • Fernández Lozano, José Francisco
  • Mompean, Federico J.
  • García-Hernández, Mar
  • Pérez, Lucas
  • Ruíz Gómez, Sandra
  • Berkov, Dmitry
  • Erohkin, S.
  • AMPHIBIAN Project ID:720853
La presente invención se refiere a un imán permanente que comprende partículas magnéticas duras y una estructura magnética blanda con relación de aspecto mayor o igual a 3 y con estructura magnética de monodominio. Además, la presente invención se refiere al procedimiento de obtención de dicho imán y al uso de dicho imán como parte de un generador o un vehículo automóvil. La presente invención se encuadra en el sector de los materiales magnéticos y sus aplicaciones industriales. [ES], The present invention relates to a permanent magnet that comprises hard magnetic particles and a soft magnetic structure with an aspect ratio greater than or equal to 3 and with a single-domain magnetic structure. Furthermore, the present invention relates to the method for obtaining such a magnet and to the use of such a magnet as part of a generator or a motor vehicle. The present invention belongs to the sector of magnetic materials and their industrial applications. [EN], Peer reviewed, Consejo Superior de Investigaciones Científicas (España), Universidad Complutense de Madrid, General Numerics Research Lab, A1 Solicitud de patente con informe sobre el estado de la técnica
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Scaling up the production of electrodeposited nanowires: A roadmap towards applications

  • Fernández-González, Claudia
  • Guzmán-Mínguez, J. C.
  • Guedeja-Marrón, A
  • García-Martín, Eduardo
  • Foerster, Michael
  • Niño, Miguel Ángel
  • Aballe, Lucía
  • Quesada, Adrián
  • Pérez, Lucas
  • Ruiz-Gómez, Sandra
  • AMPHIBIAN Project ID:720853
11 pags., 5 figs., 1 tab. -- This article belongs to the Special Issue Multifunctional Magnetic Nanowires and Nanotubes, The use of metallic nanowires is mostly reduced to scientific areas where a small quantity of nanostructures are needed. In order to broaden the applicability of these nanomaterials, it is necessary to establish novel synthesis protocols that provide a larger amount of nanowires than the conventional laboratory fabrication processes at a more competitive cost. In this work, we propose several modifications to the conventional electrochemical synthesis of nanowires in order to increase the production with considerably reduced production time and cost. To that end, we use a soft anodization procedure of recycled aluminum at room temperature to produce the alumina templates, followed by galvanostatic growth of CoFe nanowires. We studied their morphology, composition and magnetic configuration, and found that their properties are very similar to those obtained by conventional methods., This research was partially funded by the Spanish Agencia Estatal de Investigación through projects MAT2017-87072-C4-2-P and RTI2018-095303-B-C53, by The Ministerio de Ciencia y Universidades through project RTI2018-095303-A-C52, through the Ramón y Cajal Contract RYC2017-23320, The European Commission through the H2020 Project No. 720853 (AMPHIBIAN) and by the Comunidad de Madrid through Project NANOMAGCOST-CM P2018/NMT-4321.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Progress and prospects of hard hexaferrites for permanent magnet applications

  • Julián Fernández, César de
  • Sangregorio, Claudio
  • de la Figuera, Juan
  • Belec, B.
  • Makovec, D.
  • Quesada, Adrián
  • AMPHIBIAN Project ID:720853
30 pags., 22 figs., 2 tabs., Permanent magnets based on hard hexaferrite represent the largest family of magnets being used today by volume. They generate moderate remanence induction, but present crucial advantages in terms of availability, cost, resistance to demagnetization and corrosion and absence of eddy current losses. As a consequence, ferrites are the most logical candidate for substitution of rare-earths in selected applications that do not demand the best performing magnets. If the remanence of ferrite-based magnets was to be improved, even mildly, the door to a larger scale substitution could be opened. In this framework, we review here current strategies to improve the properties of hexaferrites for permanent magnet applications. We first discuss the potential of exploring the nanoscale. Second, progress related to controllably doping hexaferrites is revised. Third, results achieved by fabricating hard-soft magnetic composites using ferrites as the hard phase are presented. Finally, future prospects and new potential end applications for ferrite magnets are discussed., This work was supported by the Slovenian Research Agency through research programs Nos. P2-0089 and P2-0412 and project J2-8166, by the Spanish Ministry of Science and Innovation through projects RTI2018-095303-BC51 and RTI2018-095303-A-C52, by the European Commission through Project H2020 No. 720853 (Amphibian) and by the Regional Government of Madrid through project S2018-NMT-4321.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ultrafast particle size reduction of Fe73.9Si15.5Cu1Nb3B6.6 by high-energy milling: Nb2O5 as a marker of permeability enhancement and magnetic hardening

  • López-Sánchez, Jesús
  • Navarro, Elena
  • Serrano Rubio, Aída
  • Granados-Miralles, Cecilia
  • Campo, Ángel Adolfo del
  • Quesada, Adrián
  • Marín, Pilar
  • AMPHIBIAN Project ID:720853
[EN] This work is conceived to provide a reproducible and fast method to obtain optimal particle sizes for competitive ultrasoft magnetic applications based on FeSiCuNbB-nanostructured particles. In this scenario, partial nanocrystallization of the α-FeSi compound is promoted by annealing and subsequent high-energy ball milling processes. The milling is performed in this material, for the first time, by a combination of mixer, vibratory, and planetary ball milling motions. Under these conditions, structural and magnetic properties are tuned as a function of milling time with reduced particle size distributions and maintaining the ultrasoft magnetic character. In addition, drastic electronic and structural changes are observed after a few minutes of milling where saturation magnetization and initial permeability are strongly influenced by the percentage of the α-FeSi nanocrystallites formed. Above 30 min of ball milling, the formation of a low concentration of NbO clusters is detected by confocal Raman microscopy. This identification is essential because the rejection of Nb from the amorphous matrix rich in Fe−Nb−B atoms acts as a marker of the seed mechanism that causes the deterioration of the softness character of these nanostructures. Therefore, on the one hand, this work introduces a successful procedure by combined milling processes to optimize the saturation magnetization and permeability with submicron particle sizes and, on the other hand, the detection of NbO clusters is implemented as an influential marker on the magnetic properties of these soft nanostructured particles., The authors acknowledge the Spanish Ministry of Industry, Economy, and Competitiveness for financing the project MAT2015-65445-C2-1-R, MAT2017-86450-C4-1-R, MAT2015-67557-C2-1-P, the Comunidad de Madrid by S2013/MIT-2850 NANOFRONTMAG, and the European Commission under H2020 frame by AMPHIBIAN project ID: 720853. The authors are also grateful for the financial support from the Spanish Ministry of Science, Innovation and Universities (MICIU) and The Spanish National Research Council (CSIC) under Grant no. PIE 2010-6OE-013. A.S. acknowledges the financial support from the Comunidad de Madrid for an “Atracción de Talento Investigador” contract (no. 2017-t2/IND5395). C.G.-M. and A.Q. acknowledges the financial support from MICINN through the “Juan de la Cierva” Program (FJC2018-035532-I) and through the Ramón y Cajal Contract RYC-2017-23320., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Multiphase materials based on the Fe73.9Si15.5Cu1Nb3B6.6 alloy obtained by dry and wet high-energy ball milling processes

  • López-Sánchez, Jesús
  • Navarro, Elena
  • Rodríguez-Granado, Freddy
  • Serrano Rubio, Aída
  • Marín, Pilar
  • AMPHIBIAN Project ID:720853
[EN] Novel hybrid materials based on the soft nanocrystalline FeSiCuNbB alloy are designed in this work with the purpose of reducing its particle size and developing different compositional, structural, and magnetic properties depending on the high-energy ball milling time and route employed. Innovative processes combining mixer, vibratory and planetary motions at the same time are carried out under a dry and a wet route, obtaining reduced sub-micron particle size distributions after 2 h of milling. The established approach takes advantage of the nature of amorphous materials to promote the formation of different hybrid compounds and it is supported by the high virulence of the milling process performed at 2000 rpm. On the one hand, the results obtained by the dry route show a structural and magnetic evolution dominated by the presence of ferromagnetic α-FeSi nanocrystals. On the other hand, the wet approach that is supported by glycerol evidences the destruction of the α-FeSi with the milling time in favor of the non-magnetic β-FeSi phase, obtaining a new functionality for the FeSiCuNbB alloy. Their properties as soft magnetic alloys are evaluated and compared depending on the followed route, opening up a new physicochemical method in the development of multiphase compounds with potential applications. With this work, a controlled formation of different hybrid compounds is achieved, revealing an effective mechanism to introduce functional materials with different properties embedded in an amorphous ferromagnetic matrix., The authors acknowledge the Spanish Ministry of Industry, Economy and Competitiveness for financing the project MAT2015-65445-C2-1-R, MAT2017-86450-C4-1-R, MAT2015-67557-C2-1-P, RTI2018-095303-A-C52, and , the Comunidad de Madrid by S2013/MIT-2850 NANOFRONTMAG, and the European Commission under H2020 frame by AMPHIBIAN Project ID: 720853. In addition, the authors thank for the financial support from the Spanish Ministry of Science, Innovation and Universities (MICIU) and The Spanish National Research Council (CSIC) under Grant no. PIE 2010-6OE-013. A. S. acknowledges the financial support from the Comunidad de Madrid for an “Atracción de Talento Investigador” contract (no. 2017-t2/IND5395)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Controlling structural and magnetic properties of SrFe12O19 nanoplatelets by synthesis route and calcination time

  • AMPHIBIAN Project ID:720853
  • Hoelscher, Jennifer
  • Saura-Múzquiz, Matilde
  • Ahlburg, Jakob V.
  • Mørch, Mathias
  • Grønseth, Didrik Konow
  • Christensen, Mogens
[EN] Nanocrystalline platelets of Sr hexaferrite, SrFe12O19, were prepared by four techniques (two hydrothermal and two sol–gel techniques) and calcined at 1000 ◦C for 1, 2, 4, 8 and 16 h. The microstructure of these samples was analyzed using Rietveld refinements of high-resolution synchrotron powder x-ray diffraction data, and the obtained results were correlated with the magnetic properties obtained from vibrating sample magnetometer measurements. The calcination treatment causes the crystallites to preferentially grow along the c-axis, leading to more isotropic crystallites. Moreover, the microstructural changes induced by calcination alter the magnetic properties, yielding a higher saturation magnetization in all samples. The attained coercivity is correlated with the crystallite size along the width of the platelets. Despite the pronounced changes of the microstructure and the magnetic properties after calcination, the calcination duration has a minor effect on the properties, i.e. in most cases the steady state is obtained after 1 h. The starting material has a profound impact on the microstructural change during calcination, despite the high calcination temperature., The authors gratefully acknowledge the financial support from the European Commission through the H2020 project AMPHIBIAN (H2020-NMBP-2016-720853) and the Danish Center for Synchrotron and Neutron Science (DanScatt)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Hydrothermal synthesis of SrFe12O19 nanoparticles: effect of the choice of base and base concentration

  • AMPHIBIAN Project ID:720853
  • Zink Eikeland, Anna
  • Hoelscher, Jennifer
  • Christensen, Mogens
[EN] Platelet shaped strontium hexaferrite (SrFe12O19) crystallites were hydrothermally synthesized in an autoclave to study the effect of (a) Fe/Sr molar ratio, (b) choice of base NaOH/KOH and (c) base concentration. The influence of these parameters on the final product is evaluated with regards to phase composition, structure and magnetic properties. Rietveld refinements were performed on powder x-ray diffraction (PXRD) data to determine the phase composition, structural changes, crystallite sizes, and preferred orientation, while the magnetic properties were measured using a vibrating sample magnetometer. When NaOH is used as the base, the samples consist mostly (>95 wt.%) of SrFe12O19 up to the same molar ratio of Fe/Sr = 8, independent of the concentration of the base. In contrast, when using KOH, the phase composition depends on both the molar ratio of Fe/Sr and the concentration of KOH. High concentrations of Sr2+ and OH− (Fe/Sr = 1 and OH−/NO3− = 4) result in the growth of wide crystallites (>400 nm). The thickness of the crystallites are in all cases around 40 nm causing the crystallites to have an anisotropic shape, which can align without applying an external magnetic field. In the case of KOH as base instead of NaOH, an expansion of the unit cell is observed, which can be attributed to K+ substituting Sr2+ in the structure. This is corroborated by increasing microstrain when increasing the KOH/NO3− ratio. Variations in the observed coercivity may be attributed to substitution of Sr2+ by K+. The present study illustrates that meticulous control of all reaction parameters and a meticulous analysis of the crystal structure is key for preparing and understanding hard-magnetic SrFe12O19., The authors are grateful for financial support from the European Commission through the H2020 project AMPHIBIAN (H2020-NMBP-2016-720853). Support from the Danish National Research Foundation (Center for Materials Crystallography, DNRF-93) is gratefully acknowledged. Affiliation with the Center for Integrated Materials Research (iMAT) at Aarhus University is gratefully acknowledged and JH acknowledges affiliation with the Sino-Danish Center for Education and Research (SDC)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Optimizing the magnetic properties of hard and soft materials for producing exchange spring permanent magnets

  • AMPHIBIAN Project ID:720853
  • Petrecca, Michele
  • Muzzi, Beatrice
  • Oliveri, Stefano Maria
  • Albino, Martin
  • Yaacoub, Nader
  • Peddis, Davide
  • Julián Fernández, César de
  • Innocenti, Claudia
  • Sangregorio, Claudio
[EN] The exploitation of the exchange coupling between hard and soft magnetic materials has been proposed for enhancing the magnetic performances of rare-earth free permanent magnets, with the aim of extending their use to all applications where moderate energy product (35–100 kJ m−3) is required. Strontium hexaferrite (SFO)/spinel ferrite composites seem particularly promising to achieve this target, although the conditions to maximize the effect while using techniques easily scalable to industrial production have not yet been identified. Within this framework, the optimization of the structural, chemical, and magnetic properties of the two moieties before the coupling procedure is crucial to enhance the energy product of the final composite. Here we report the syntheses of both nanometric SFO with high coercivity (ca. 525 kA m−1) and quasi-bulk saturation magnetization (68 Am2 kg−1) and a series of nanosized zinc-doped ferrite (ZnxFe3−xO4, 0.0 ⩽ x ⩽ 0.4) through cheap, easily scalable and eco-friendly approaches. The structural and chemical stability of the two magnetic phases as a function of temperature were investigated up to 1100 ◦C, with the aim of finding the best compromise between preservation of the nanometric scale and magnetic properties. A very high-magnetization (106 Am2 kg−1) ferrite was obtained by annealing Zn0.3Fe2.7O4 nanopowder at the highest investigated temperature. A preliminary attempt at coupling the two phases, starting from a mixture of the nanopowders, was performed through a classic annealing process in the temperature range 500 ◦C–1100 ◦C. The adopted procedure allowed for obtaining an exchange coupled composite at 1100 ◦C where the two phases are intimately and homogeneously mixed, with micrometric (0.3–5 μm) and nanometric (up to 50 nm) spinel ferrite particles. Despite these promising results, no enhancement of the energy product was found, highlighting the need for further experimental efforts to improve the coupling procedure., We acknowledge Dr S Ciattini and Dr L Chelazzi of the Centro Servizi di Cristallografia Strutturale at the University of Florence for help in x-ray powder diffraction data collection, Dr L Capozzoli and Dr A Lavacchi of Ce.M.E.—Centro di Microscopie Elettroniche Laura Bonzi of CNR for SEM and STEM images, Professor S Caporali and Dr S Martinuzzi of the University of Florence for SEM images, and the European Commission for funds through project H2020 No. 720853 (AMPHIBIAN)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Modelling of the magnetization reversal of nanocomposites consisting of core–shell particles

  • AMPHIBIAN Project ID:720853
  • Erokhin, Sergey
  • Berkov, Dmitry
[EN] We performed large-scale micromagnetic simulations on core–shell particle systems for SrFe12O19/Fe and CoFe2O4/Co nanocomposites, where both magnetically hard and soft materials were considered as the core or shell materials of these particles. A detailed analysis of the influence of structural properties and exchange core–shell coupling within the same particle on the magnetization reversal of a nanocomposite was carried out, revealing different remagnetization scenarios in terms of the evolution of magnetization distributions in soft magnetic cores. The optimal nanocomposite compounds with respect to the energy product of material were predicted., Authors gratefully acknowledge financial support of EUH2020 AMPHIBIAN Project (720853)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Magnetic Property Enhancement of Spinel Mn–Zn Ferrite through Atomic Structure Control

  • AMPHIBIAN Project ID:720853
  • Hölscher, Jennifer
  • Petrecca, Michele
  • Albino, Martin
  • Gorm Garbus, Pelle
  • Saura-Múzquiz, Matilde
  • Sangregorio, Claudio
  • Christensen, Mogens
[EN] Temperature treatment of magnetic Mn−Zn ferrites with the composition Mn0.6Zn0.2Fe2.2O4 up to 1100 °C results in a tremendous enhancement of the saturation magnetization by more than 60%. Employing a robust combined Rietveld refinement of powder X-ray and neutron diffraction (PXRD and NPD) data, it is revealed how a reordering of the cations takes place during the annealing step, the extent of which depends on the annealing temperature. While Zn(II) exclusively occupies tetrahedral sites throughout the whole temperature range, as the annealing temperature increases up to 700 °C, the Mn(II) cation distribution shifts from 80(7)% of the total Mn content occupying the octahedral sites (partly inverse spinel) to Mn only being present on the tetrahedral sites (normal spinel). Above 700 °C, pronounced crystallite growth is observed, followed by an increase of the saturation magnetization. Complementary techniques such as energy dispersive X-ray spectroscopy (EDS) and transmission electron microscopy (TEM) confirm an even cation distribution and the particle growth with annealing temperature. The structural changes caused by annealing of spinel ferrites directly alter the magnetic properties of the materials, thus serving as an easy handle for enhancing their magnetic properties., The authors are grateful for financial support from the European Commission through the H2020 project AMPHIBIAN (H2020-NMBP-2016-720853). Support from the Danish National Research Foundation (Center for Materials Crystallography, DNRF-93) and the Danish Center for Synchrotron and Neutron Science (DanScatt) is gratefully acknowledged. We would also like to acknowledge the assistance from instrument staff, namely, Lukas Keller at SINQ, PSI, Switzerland, and Thomas Hansen at ILL, Grenoble, France. Affiliation with the Center for Integrated Materials Research (iMAT) at Aarhus University is gratefully acknowledged by J.H., P.G.G., M.S.M., and M.C. J.H. acknowledges affiliation with the Sino-Danish Center for Education and Research (SDC)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Mechanical Orientation of Fine Magnetic Particles in Powders by an External Magnetic Field: Simulation-Based Optimization

  • AMPHIBIAN Project ID:720853
  • Erokhin, Sergey
  • Berkov, Dmitry
[EN] A numerical algorithm for predicting the optimal conditions for the effectivealignment of magnetic particles in dense powders during the compactizationprocess using an externally appliedfield is presented. This task is especiallyimportant for the development of permanent magnets due to the fact that thealignment of anisotropy axes of nanocomposite grains increases both remanenceand coercivity of magnetic materials. In contrast to previously known methodswhere the magnetic moment of each particle is assumed to be“fixed”withrespect to the particle itself, the approach considers the (field-dependent)deviation of this moment from the particle anisotropy axis that occurs even formagnetically“hard”particles possessing a strong mechanical contact. It isshown that this deviation leads to the existence of the optimal value of theappliedfield for which the particle orientation (or alignment) time is minimal. Theinfluence of the external pressure and internal mechanical friction on the detailsof the compactization/orientation process is also studied., Authors gratefully acknowledgefinancial support of EU-H2020AMPHIBIAN Project (720853), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Toward Understanding Complex Spin Textures in Nanoparticles by Magnetic Neutron Scattering

  • Vivas, Laura G.
  • Yanes, Rocío
  • Berkov, Dmitry
  • Erokhin, Sergey
  • Bersweiler, Mathias
  • Honecker, Dirk
  • Bender, Philipp
  • Michels, Andreas
  • AMPHIBIAN Project ID:720853
[EN] In the quest to image the three-dimensional magnetization structure we show that the technique of magnetic small-angle neutron scattering (SANS) is highly sensitive to the details of the internal spin structure of nanoparticles. By combining SANS with numerical micromagnetic computations we study the transition from single-domain to multidomain behavior in nanoparticles and its implications for the ensuing magnetic SANS cross section. Above the critical single-domain size we find that the cross section and the related correlation function cannot be described anymore with the uniform particle model, resulting, e.g., in deviations from the well-known Guinier law. In the simulations we identify a clear signature for the occurrence of a vortexlike spin structure at remanence. The micromagnetic approach to magnetic SANS bears great potential for future investigations, since it provides fundamental insights into the mesoscale magnetization profile of nanoparticles., L. G. V., P. B., and A. M. acknowledge financial support from the National Research Fund of Luxembourg (AFR Postdoc Grant No. 8865354 and CORE SANS4NCC grant). R. Yanes acknowledges financial support from Junta de Castilla y León (Project No. SA090U16). This research was supported by the EU-H2020 AMPHIBIAN Project No. 720853, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Magnetic properties of bulk nanocrystalline cobalt ferrite obtained by high-pressure field assisted sintering

  • AMPHIBIAN Project ID:720853
  • Baldini, Angelica
  • Petrecca, Michele
  • Sangregorio, Claudio
  • Anselmi-Tamburini, Umberto
[EN] We present here an investigation aimed at exploring the role of the microstructure on the magnetic properties of nanostructured cobalt ferrite. Bulk, almost fully dense, nanograined ferrites have been obtained starting from nanopowders prepared by a simple, inexpensive, water-based, modified Pechini method. This synthesis yielded largely aggregated, pure single-phase cobalt ferrite nanoparticles of ca. 35 nm average size, which have been then densified by high-pressure field-assisted sintering. Different sintering conditions (pressure up to 650 MPa and temperature up to 800 °C) and procedures have been used on both as-prepared and milled nanopowders in order to obtain materials with a spectrum of complex microstructures. In all cases, the sintering process did not produce any change in the phase composition. At the same time, using a high uniaxial pressure in combination with relatively low sintering temperatures and times, allowed for obtaining a high degree of densification while preserving the nanometric size of the crystallites. Moreover, we observed that in the densified materials the best magnetic properties are not necessarily associated with a more uniform microstructure, but rather arise from a delicate balance between moderate aggregation, grain size and high density., European Commission for funds through project H2020 No. 720853 (Amphibian)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Magnetic performance of SrFe12O19–Zn0.2Fe2.8O4 hybrid magnets prepared by spark plasma sintering

  • Jenus, P.
  • Učakar, A.
  • Repše, S.
  • Sangregorio, Claudio
  • Petrecca, Michele
  • Albino, Martin
  • Cabassi, R.
  • de Julián Fernández, C.
  • Belec, B.
  • AMPHIBIAN Project ID:720853
[EN] In the last few years, significant effort has again been devoted to ferrite-based permanent magnet research due to the so-called rare-earth crisis. In particular, a quest to enhance ferrites maximum energy product, BHmax, is underway. Here, the influence of composition and sintering conditions on the microstructure and consequently magnetic properties of strontium ferrite-based hybrid composites was investigated. The powder mixtures consisted of hydrothermally synthesised Sr-ferrite with hexagonally shaped platelets with a diameter of 1 μm and thickness up to 90 nm, and a soft magnetic phase in various ratios. Powders were sintered using a spark plasma sintering furnace. The crystal structure, composition and microstructure of the starting powders and hybrid magnets were examined. Their magnetic properties were evaluated by vibrating sample magnetometer, permeameter and by single-point-detection measurements., This work is supported by the European Commission through Project H2020 No. 720853 (AMPHIBIAN) and Slovenian Research Agency is acknowledged for funding the research program Ceramics and complementary materials for advanced engineering and biomedical applications (P2-0087), CEMM, JSI is acknowledged for the use of EM., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Modulation of the magnetic properties of gold-spinel ferrite heterostructured nanocrystals

  • AMPHIBIAN Project ID:720853
  • Fantechi, Elvira
  • Innocenti, Claudia
  • Bertoni, Giovanni
  • Sangregorio, Claudio
  • Pineider, Francesco
[EN] The rational design of complex nanostructures is of paramount importance to gain control over their chemical and physical properties. Recently, magnetic-plasmonic heterostructured nanocrystals have been recognized as key players in nanomedicine as multifunctional therapeutic-diagnostic tools and in catalysis. Here we show how the properties of gold-iron oxide heterostructured nanocrystals can be tuned by chemical doping of the magnetic subunit. The divalent cations in the iron oxide were substituted with cobalt and manganese to obtain a general formula Au-MFe2O4 (M = Fe, Co, Mn). Magnetic properties of the heterostructures could be tuned, while maintaining well-defined plasmon resonance signatures, confirming the dual magnetic-plasmonic functional capability of these nanostructures., The financial support of European Union’s Horizon 2020 Research and Innovation program under Grant agreements No. 737093 (FEMTOTERABYTE, http://www.physics.gu.se/ femtoterabyte) and No. 720853 (AMPHIBIAN, http://amphibianproject.eu/), University of Pisa through project PRA_ 2017_25 and INFN through HADROMAG project is gratefully acknowledged. E. F. thanks the support of the “Galileo Galilei” fellowship from the University of Pisa., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

On the potential of hard ferrite ceramics for permanent magnet technology-a review on sintering strategies

  • AMPHIBIAN Project ID:720853
  • Granados-Miralles, Cecilia
  • Jenuš, Petra
[EN] A plethora of modern technologies rely on permanent magnets for their operation, including many related to the transition towards a sustainable future, such as wind turbines or electric vehicles. Despite the overwhelming superiority of magnets based on rare-earth elements in terms of the magnetic performance, the harmful environmental impact of the mining of these raw materials, their uneven distribution on Earth and various political conflicts among countries leave no option but seeking for rare-earth-free alternatives. The family of the hexagonal ferrites or hexaferrites, and in particular the barium and strontium M-type ferrites (BaFe12O19 and SrFe12O19), are strong candidates for a partial rare-earth magnets substitution, and they are indeed successfully implemented in multiple applications. The manufacturing of hexaferrites into dense pieces (i.e. magnets) meeting the requirements of the specific application (e.g. magnetic and mechanical properties, shape) is not always straightforward, which has in many cases hampered the actual substitution at the industrial level. Here, past and on-going research on hexaferrites sintering is reviewed with a historical perspective, focusing on the challenges encountered and the solutions explored, and correlating the sintering approaches with the magnetic performance of the resulting ceramic magnet., This work is supported by the European Commission through the H2020 project with Grant agreement H2020-NMBP-2016-720853 (AMPHIBIAN) and by the Spanish Ministerio de Ciencia, Innovación y Universidades (RTI2018-095303-A-C52). C G M acknowledges financial support from Spanish Ministerio de Ciencia e Innovación (MICINN) through the 'Juan de la Cierva' Program (FJC2018-035532-I). Financial support from the Slovenian Research Agency (research core funding No. P2-0087) is acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Tesis doctoral (DoctoralThesis)

Study of nanostructured hard ferrites and their coupling with a soft layer

  • Delgado Soria, Guiomar
  • AMPHIBIAN Project ID:720853
Tesis Doctoral inédita leída en la Universidad Autónoma de Madrid, Facultad de Ciencias, Departamento de Física Aplicada. Fecha de Lectura: 22-06-2021. Tuning the Néel temperature in an antiferromagnet: the case of NixCo1−xO microstructures  Mandziak, Anna; D. Soria, Guiomar; Prieto, José Emilio; Prieto, Pilar; Granados-Miralles, Cecilia; Quesada, Adrian; Foerster, Michael; Aballe, Lucia; de la Figuera, Juan 2019-12-01 (http://hdl.handle.net/10261/191677) Adipose-derived mesenchymal stromal cells for the treatment of patients with severe SARS-CoV-2 pneumonia requiring mechanical ventilation. A proof of concept study  Sánchez-Guijo, Fermín; García-Arranz, Mariano; López-Parra, Miriam; Monedero, Pablo; Mata-Martínez, Carmen; Santos, Arnoldo; Sagredo, Víctor; Alvarez-Avello, José Manuel; Guerrero, José Eugenio; Pérez-Calvo, César; Sánchez-Hernández, Miguel Vicente; Del-Pozo, José Luis; Andreu, Enrique J.; Fernández-Santos, María Eugenia; Soria-Juan, Barbara; Hernández-Blasco, Luis M.; Andreu, Etelvina; Sempere, José M.; Zapata, Agustín G.; Moraleda, José M.; Soria, Bernat; Fernández-Avilés, Francisco; García-Olmo, Damián; Prósper, Felipe 2020-07-10 (http://hdl.handle.net/10261/83705) Self-assembly of 1D/2D hybrid nanostructures consisting of a Cd(II) coordination polymer and NiAl-layered double hydroxides  Abellán, Gonzalo; Amo-Ochoa, P.; Fierro, J.G.; Ribera, Antonio; Coronado, E.; Zamora, F. 2015-12-29 (http://hdl.handle.net/10261/137036), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

High magnetic coercive field in Ca‐Al‐Cr substituted strontium hexaferrite

  • AMPHIBIAN Project ID:720853
  • Stingaciu, Marian
  • Mishra, Durgamadhab
  • Julián Fernández, César de
  • Cabassi, Riccardo
  • Zink Eikeland, Anna
  • Christensen, Mogens
  • Deledda, Stefano
[EN] The structural and magnetic properties of Sr0.67Ca0.33Fe9Al3−xCrxO19 submicrometric powders with substitution levels ranging from x = 0 up to x = 3, prepared by sol-gel synthesis method, have been investigated. The powders were characterized by high resolution synchrotron X-ray diffraction, scanning electron microscopy, powder neutron diffraction and MPMS-SQUID magnetometer. The structural analysis shows that upon Ca-substitution of SrFe12O19 at the Sr site and Al–Cr at the Fe sites, the magnetoplumbite structure is preserved, even for large levels of substitutions. The X-ray powder diffraction peak broadening and Williamson-Hall plots analyses indicate an increase of crystallites size and relaxation of the microstrain with increasing amounts of Chromium. The magnetic hysteresis loops reveal high coercivity fields at room temperature, with the highest value of HC = 1125 kA/m (1.41 T) obtained for Sr0.67Ca0.33Fe9Al2.5Cr0.5O19 powder interesting to develop free-Rare Earth high coercivity magnets. The saturation magnetization and remanence values increase monotonically with increasing Cr content while the switching field decreases. The structural Rietveld refinement of combined X-ray/neutron diffraction data shows the affinity of Al3+ and Cr3+ cations to migrate mainly towards (2a) Fe-Oh2 and (12k) Fe-Oh3 sites and only minor amounts is found on the (4f1) Fe-Oh1 octahedral sites. The structural observations corroborate the magnetic properties, demonstrating a correlation between the structure and magnetic properties in Ca–Al–Cr substituted strontium hexaferrite. The role of the particle size to maximize the coercivity properties is discussed., This work was funded by the European Commission through the Research and Innovation project AMPHIBIAN, grant agreement H2020-NMBP-2016-720853., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

3d metal doping of core@shell wüstite@ferrite nanoparticles as a promising route toward room temperature exchange bias magnets

  • Muzzi, Beatrice
  • Albino, Martin
  • Petrecca, Michele
  • Innocenti, Claudia
  • Julián Fernández, César de
  • Bertoni, Giovanni
  • Marquina, Clara
  • Ibarra, M. Ricardo
  • Sangregorio, Claudio
  • AMPHIBIAN Project ID:720853
Nanometric core@shell wüstite@ferrite (Fe1-xO@Fe3O4) has been extensively studied because of the emergence of exchange bias phenomena. Since their actual implementation in modern technologies is hampered by the low temperature at which bias is operating, the critical issue to be solved is to obtain exchange-coupled antiferromagnetic@ferrimagnetic nanoparticles with ordering temperature close to 300 K by replacing the divalent iron with other transition-metal ions. Here, we studied the effect of the combined substitution of Fe(II) with Co(II) and Ni(II) on the crystal structure and magnetic properties. To this aim, a series of 20 nm nanoparticles with a wüstite-based core and a ferrite shell, with tailored composition, (Co0.3Fe0.7O@Co0.8Fe2.2O4 and Ni0.17Co0.21Fe0.62O@Ni0.4Co0.3Fe2.3O4) were synthetized through a thermal-decomposition method. An extensive morphological and crystallographic characterization of the obtained nanoparticles showed how a higher stability against the oxidation process in ambient condition is attained when divalent cation doping of the iron oxide lattice with Co(II) and Ni(II) ions is performed. The dual-doping revealed to be an efficient way for tuning the magnetic properties of the final system, obtaining Ni-Co doped iron oxide core@shell nanoparticles with high coercivity (and therefore, high energy product), and increased antiferromagnetic ordering transition temperature, close to room temperature., This work is supported by EU-H2020 AMPHIBIAN Project (n. 720853) and by European Union’s Horizon 2020 research and innovation programme under grant agreement No 823717-ESTEEM3, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Tesis doctoral (DoctoralThesis)

Efectos del procesamiento cerámico y la adición de nanohilos de FeCo en la obtención de diferentes tipos de imanes permanentes de ferrita más sostenibles y mejorados.

  • Guzmán-Mínguez, J. C.
  • AMPHIBIAN Project ID:720853
La realización de este trabajo ha sido posible gracias a la financiación del Ministerio de Ciencia e Innovación de España a través de los Proyectos no. MAT2017-86450-C4-1-R, MAT2015-64110-C2-1-P, MAT2015-64110-C2-2-P, MAT2017-87072-C4-2-P, RTI2018-095303-B-C51, RTI2018-095303-B-C53, RTI2018-095303-A-C52 y FIS2017-82415-R y a través del Contrato Ramón y Cajal RYC-2017-23320; y por la Comisión Europea a través del Proyecto H2020 nº 720853 (AMPHIBIAN). El trabajo está financiado también por la Comunidad de Madrid a través del Proyecto S2018/NMT-4321 (NANOMAGCOST)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Procedimiento de obtención de un imán permanente de cerámica magnéticamente anisótropo y denso

  • Serrano Rubio, Aída
  • García-Martín, Eduardo
  • Fernández Lozano, José Francisco
  • Granados-Miralles, Cecilia
  • Quesada, Adrián
  • AMPHIBIAN Project ID:720853
La presente invención se refiere a un procedimiento de obtención de un imán permanente de cerámica que comprende una etapa de mezclar micro- y/o nano- partículas magnéticas duras o blandas con un disolvente orgánico básico o ácido, una etapa de compactación, una etapa de calentamiento bajo presión, una etapa de enfriamiento y una etapa de sinterización. La presente invención se encuadra en el sector de los materiales magnéticos y sus aplicaciones industriales., Peer reviewed, Consejo Superior de Investigaciones Científicas, A1 Solicitud de patente con informe sobre el estado de la técnica
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Procedimiento de obtención de un imán permanente de cerámica magnéticamente anisótropo y denso

  • Serrano Rubio, Aída
  • García-Martín, Eduardo
  • Fernández Lozano, José Francisco
  • Granados-Miralles, Cecilia
  • Quesada, Adrián
  • AMPHIBIAN Project ID:720853
La presente invención se refiere a un procedimiento de obtención de un imán permanente de cerámica que comprende una etapa de mezclar micro- y/o nano- partículas magnéticas duras o blandas con un disolvente orgánico básico o ácido, una etapa de compactación, una etapa de calentamiento bajo presión, una etapa de enfriamiento y una etapa de sinterización. La presente invención se encuadra en el sector de los materiales magnéticos y sus aplicaciones industriales., Peer reviewed, Consejo Superior de Investigaciones Científicas, B2 Patente con examen previo
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Method for obtaining a magnetically anisotropic and dense permanent ceramic magnet, Procedimiento de obtención de un imán permanente de cerámica magnéticamente anisótropo y denso

  • Serrano Rubio, Aída
  • García-Martín, Eduardo
  • Fernández Lozano, José Francisco
  • Granados-Miralles, Cecilia
  • Quesada, Adrián
  • AMPHIBIAN Project ID:720853
[EN] The present invention relates to a process for obtaining a perrnanent ceramic magnet comprising a step of mixing hard or soft magnetic micro- and/or nano-particles with a basic organic solvent or acid, a compaction step, a heating step under pressure, a cooling step, anda sintering step. The present invention belongs to the sector of magnetic materials and their industrial applications., [ES] La presente invención se refiere a un procedimiento de obtención de un imán permanente de cerámica que comprende una etapa de mezclar micro- y/o nano- partículas magnéticas duras o blandas con un disolvente orgánico básico o ácido, una etapa de compactación, una etapa de calentamiento bajo presión, una etapa de enfriamiento y una etapa de sínterización. La presente invención se encuadra en el sector de los materiales magnéticos y sus aplicaciones industriales., Peer reviewed, Consejo Superior de Investigaciones Científicas, A1 Solicitud de patente con informe sobre el estado de la técnica
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Growth and characterization of ultrathin cobalt ferrite films on Pt(111)

  • Delgado Soria, Guiomar
  • Freindl, K.
  • Prieto, J. E.
  • Quesada, Adrián
  • de la Figuera, Juan
  • Spiridis, N.
  • Korecki, J.
  • Marco, J.F.
  • AMPHIBIAN Project ID:720853
9 pags., 8 figs., 2 tabs., CoFeO thin films (5 nm and 20 nm thick) were grown by oxygen assisted molecular beam epitaxy on Pt(111) at 523 K and subsequently annealed at 773 K in vacuum or oxygen. They were characterized in-situ using Auger Electron Spectroscopy, Low-Energy Electron Diffraction, Scanning Tunneling Microscopy and Conversion Electron Mössbauer Spectroscopy. The as-grown films were composed of small, nanometric grains. Annealing of the films produced an increase in the grain size and gave rise to magnetic order at room temperature, although with a fraction of the films remaining in the paramagnetic state. Annealing also induced cobalt segregation to the surface of the thicker films. The measured Mössbauer spectra at low temperature were indicative of cobalt ferrite, the both films showing very similar hyperfine patterns. Annealing in oxygen or vacuum affected the cationic distribution, which was closer to that expected for an inverse spinel in the case of annealing in an oxygen atmosphere., This work is supported by the Spanish Ministry of Science and Innovation through Projects RTI2018-095303-B-C51, RTI2018-095303- B-C53, MAT2017-86450-C4-1-R, RTI2018-095303-A-C52, through the Ramón Cajal Contract RYC-2017-23320 and RTI2018-095303-C52 (MCIU/AIE/FEDER,EU), by the Regional Government of Madrid through project S2018-NMT-4321 and by the PROM Programme - International scholarship exchange of Ph.D. students and academics; and by the European Commission through the H2020 Project no. 720853 (AMPHIBIAN), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Interface effects in combined soft/hard ferrite permanent magnets

  • Tejera-Centeno, César
  • Gallego, Silvia
  • AMPHIBIAN Project ID:720853
[EN] We address the detailed description of the magnetic properties of the (001) and (111) interfaces between the hard CoFe2O4 (CFO) and soft NiFe2O4 spinel ferrites, used in bicomponent systems for permanent magnet applications. The similarity between the electronic properties, magnetic order and lattice structure of both oxides allows us to isolate the effect of ideal interface formation on the magnetism of the combined system based on density functional theory. While the magnetic moments and long-range magnetic order preserve bulk-like values, the magnetic anisotropy is reduced by the presence of the interface, and depends on the specific termination. Partial inversion of CFO is also relevant, as it enhances the net magnetization and alters both the magnitude and spatial dependence of the magnetic anisotropy., This work has been financed by the European Commission under Grant H2020 No. 720853 (Amphibian) and by the Spanish Ministry of Economy and Competitiveness under Grant RTI2018-097895-C41. Parts of the simulations have been performed in the supercomputer Finis Terrae of the CESGA.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Hexaferrite-based permanent magnets with upper magnetic properties by cold sintering process via a non-aqueous solvent

  • Serrano Rubio, Aída
  • García-Martín, Eduardo
  • Granados-Miralles, Cecilia
  • Gorni, Giulio
  • López-Sánchez, Jesús
  • Ruiz-Gómez, Sandra
  • Pérez, Lucas
  • Quesada, Adrián
  • Fernández Lozano, José Francisco
  • AMPHIBIAN Project ID:720853
[EN] The incessant technological pursuit towards a more sustainable and green future depends strongly on permanent magnets. At present, their use is widespread, making it imperative to develop new processing methods that generate highly competitive magnetic properties reducing the fabrication temperatures and costs. Herein, a novel strategy for developing dense sintered magnets based on Sr-hexaferrites with upper functional characteristics is presented. An innovative cold sintering approach using glacial acetic acid as novelty, followed by a post-annealing at 1100 °C, achieves a densification of the ceramic magnets of 92% with respect to the theoretical density and allows controlling the particle growth. After the cold sintering process, a fraction of amorphous SrO is identified, in addition to a partial transformation to α-FeO as secondary crystalline phase. 46 wt% of SrFeO remains, which is mostly recuperated after the post-thermal treatment. These findings do not significantly modify the final structure of ferrite magnets, neither at short- nor long-range order. The innovative process has a positive impact on the magnetic properties, yielding competitive ferrite magnets at lower sintering temperatures with an energy efficiency of at least 25%, which opens up a new horizon in the field of rare-earth free permanent magnets and new possibilities in other applications., This work has been supported by the Ministerio Español de Ciencia, Innovación y Universidades (MCIU) through the projects MAT2017-86540-C4-1-R and RTI2018-095303-A-C52 and The European Commission through the AMPHIBIAN Project (720853). Part of these experiments was performed at the CLÆSS beamline at ALBA Synchrotron with the collaboration of ALBA staff. A.S. acknowledges financial support from Comunidad de Madrid for an “Atracción de Talento Investigador” Contract (2017-t2/IND5395). C.G.-M. and A.Q. acknowledge financial support from Ministerio Español de Ciencia e Innovación (MICINN) through the “Juan de la Cierva” Program (FJC2018-035532-I) and the “Ramón y Cajal” Contract (RYC-2017-035532).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of organic solvent on the cold sintering processing of SrFe12O19 platelet-based permanent magnets

  • Serrano Rubio, Aída
  • García-Martín, Eduardo
  • Granados-Miralles, Cecilia
  • López-Sánchez, Jesús
  • Gorni, Giulio
  • Quesada, Adrián
  • Fernández Lozano, José Francisco
  • AMPHIBIAN Project ID:720853
[EN] In this work we have investigated the effect of the solvent during the processing of SrFeO platelet-based permanent magnets by cold sintering process (CSP) plus a post-thermal treatment. Several organic solvents: glacial acetic acid, oleic acid and oleylamine have been analyzed, optimizing the CSP temperatures at 190−270 °C, under pressures of 375−670 MPa and 6−50 wt% of solvent. Modifications in the morphological and structural properties are identified depending on the solvent, which impacts on the magnetic response. Independently of the solvent, the mechanical integrity of ferrite magnets obtained by CSP is improved by a post-annealing at 1100 °C for 2 h, resulting in relative densities around 92 % with an average grain size of 1 μm and a fraction of SrFeO phase >91 %. H ≥ 2.1 kOe and M of 73 emu/g are obtained in the final sintered ceramic magnets, exhibiting the highest H value of 2.8 kOe for the magnet sintered using glacial acetic acid., This work has been supported by the Ministerio Español de Ciencia e Innovación (MICINN) through the projects MAT2017-86540-C4-1-R and RTI2018-095303-A-C52, and by the European Commission through Project H2020 No. 720853 (Amphibian). Part of these experiments was performed at the CLAESS beamline at ALBA Synchrotron with the collaboration of ALBA staff. A.S. acknowledges financial support from Comunidad de Madrid for an “Atracción de Talento Investigador” Contract (2017-t2/IND5395). C.G.-M. and A.Q. acknowledge financial support from MICINN through the “Juan de la Cierva” Program (FJC2018-035532-I) and the MICINN through the “Ramón y Cajal” Contract (RYC-2017-23320),, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Dense strontium hexaferrite-based permanent magnet composites assisted by cold sintering process

  • García-Martín, Eduardo
  • Granados-Miralles, Cecilia
  • Ruiz-Gómez, Sandra
  • Pérez, Lucas
  • Campo, Ángel Adolfo del
  • Guzmán-Mínguez, J. C.
  • Julián Fernández, César de
  • Quesada, Adrián
  • Fernández Lozano, José Francisco
  • Serrano Rubio, Aída
  • AMPHIBIAN Project ID:720853
[EN] The use of rare-earth-based permanent magnets is one of the critical points for the development of the current technology. On the one hand, industry of the rare-earths is highly polluting due to the negative environmental impact of their extraction and, on the other hand, the sector is potentially dependent on China. Therefore, investigation is required both in the development of rare-earth-free permanent magnets and in sintering processes that enable their greener fabrication with attractive magnetic properties at a more competitive price. This work presents the use of a cold sintering process (CSP) followed by a post-annealing at 1100 °C as a new way to sinter composite permanent magnets based on strontium ferrite (SFO). Composites that incorporate a percentage ≤ 10% of an additional magnetic phase have been prepared and the morphological, structural and magnetic properties have been evaluated after each stage of the process. CSP induces a phase transformation of SFO in the composites, which is partially recovered by the post-thermal treatment improving the relative density to 92% and the magnetic response of the final magnets with a coercivity of up to 3.0 kOe. Control of the magnetic properties is possible through the composition and the grain size in the sintered magnets. These attractive results show the potential of the sintering approach as an alternative to develop modern rare-earth-free composite permanent magnets., This work has been supported by the Ministerio Español de Ciencia e Innovación (MICINN), Spain, through the projects MAT2017-86540-C4-1-R and RTI2018-095303-A-C52, and by the European Commission through Project H2020 No. 720853 (Amphibian). C.G.-M. and A.Q. acknowledge financial support from MICINN through the “Juan de la Cierva” program (FJC2018-035532-I) and the “Ramón y Cajal” contract (RYC-2017-23320). S. R.-G. gratefully acknowledges the financial support of the Alexander von Humboldt foundation, Germany. A.S. acknowledges the financialsupport from the Comunidad de Madrid, Spain, for an “Atracción de Talento Investigador” contract (No. 2017-t2/IND5395).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of annealing in the formation of well-crystallized and textured SrFe12O19 films grown by RF magnetron sputtering

  • Delgado Soria, Guiomar
  • Serrano, A.
  • Prieto, J. E.
  • Quesada, Adrián
  • Gorni, Giulio
  • de la Figuera, Juan
  • Marco, J.F.
  • AMPHIBIAN Project ID:720853
10 pags., 7 figs., 4 tabs., We have studied the influence of the annealing treatment on the crystalline growth of SrFe12O19 previously deposited on Si (100) substrates using radio frequency (RF) magnetron sputtering. For this goal, two grown films, with and without ex situ heating step, have been analyzed and compared to determine the differences in their structural, compositional, and magnetic properties. The results obtained by the different analysis techniques, in particular Mössbauer spectroscopy together with EXAFS and XANES data, suggest that the as-grown film is composed of nanocrystalline maghemite nanoparticles and amorphous strontium oxide. Specifically, Mössbauer spectroscopy results pointed out the presence of Fe3+ cations occupying octahedral and tetrahedral sites with hyperfine magnetic fields 49.3 T and 44.2 T, respectively, characteristic of a spinel-related structure. A strontium hexaferrite canonical structure with a c-axis orientation in the sample plane was found for the annealed film. Graphical abstract: [Figure not available: see fulltext.]., This work is supported by the Grants TED2021-130957B-C54, RTI2018-095303-B-C51, -A-C52 and -B-C53 , MAT2017-86450-C4-1-R funded by MCIN/AEI/10.13039/501100011033 by European Union NextGenerationEU/PRTR and by “ERDF A way of making Europe”, by the Grant S2018-NMT-4321 funded by the Comunidad de Madrid and by “ERDF A way of making Europe”, by the Ramon y Cajal Contract RYC-2017-23320 and by the European Commission through the H2020 Project no.720853 (AMPHIBIAN). We gratefully acknowledge the support from CMAM for the beamtime proposal with code STD009/20. Part of these experiments were performed at the CLAESS-BL22 beamline at ALBA Synchrotron and in collaboration with ALBA staf. A.S. acknowledges fnancial support from the Comunidad de Madrid for an “Atracción de Talento Investigador” contract No. 2017-t2/IND539. We thank Dr S. Cortés for providing access to the Raman spectrometer and for his help in recording these data. Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Tesis doctoral (DoctoralThesis)

Ab-initio study of magnetic properties of complex oxides based on ferrites, Estudio de primeros principios de propiedades magnéticas en óxidos complejos basados en ferritas

  • Tejera-Centeno, César
  • AMPHIBIAN Project ID:720853
[EN] This PhD thesis investigates paths to improve the performance of nanostructured bicomponent permanent magnets (PMs) based on ferrites, using ab initio simulations of their magnetic properties. We focus on ferrites as an alternative to avoid rare-earths, whose extended use represents a serious economic, health and social problem. On one hand, the research work addresses specific practical problems of solutions devised to improve the performance of the nanostructured ferrite PMs. This includes evaluation of the magnetization of Ni ferrite upon inclusion of substitutional Zn atoms, or the role of the interfaces between cubic ferrites in the magnetic response of bicomponent systems that combine hard and soft magnets. On the other, the work tackles fundamental theoretical problems, identifying the relevance of different approximations inherent to the ab initio determination of the magnetic exchange constants of both hexagonal and cubic ferrites. This determination is at the basis of multiscale magnetic models widely used to simulate the magnetic response of nanostructured PMs. The main contributions of this work are: (i) to provide a fundamental ab initio description of hexagonal Strontium ferrite and cubic Ni, Co and Zn ferrites, both in their inverse and direct forms, identifying the large influence of the Hubbard U term on their magnetic properties; (ii) to quantify the influence of the approximations inherent to the mapping of ab initio energies to Heisenberg Hamiltonians in the values of the magnetic exchange constants; (iii) to identify the supremacy of Monte Carlo methods over mean field approaches to estimate magnetic ordering temperatures; (iv) to prove the origin of the decreased magnetization of Ni ferrite under Zn substiution, caused by the tendency of Zn to occupy octahedral sites; (v) to determine the features of the interfaces between Co ferrite and both Ni and Mn ferrites, evidencing strain as the main source of modifications, mainly regarding the magnetic anisotropy., [ES] Esta tesis investiga cómo mejorar el rendimiento de imanes permanentes (IPs) nanoestructurados basados en sistemas bicomponente de ferritas, utilizando técnicas de primeros principios. Analizamos ferritas como alternativa a los imanes basados en tierras raras, elementos que representan una seria amenaza desde el punto de vista de la sostenibilidad, la economía y la salud. Por un lado, investigamos problemas prácticos asociados a algunas de las soluciones propuestas para mejorar el rendimiento de los IPs nanoestructurados de ferritas. Esto incluye la evaluación de la imanación de la ferrita de Ni cuando se introduce Zn sustitucional, o el análisis del papel de las intercaras de ferritas cúbicas en la respuesta magnética de sistemas bicomponente que combinan imanes blando y duro. Por otra parte, nuestra investigación aborda problemas teóricos fundamentales, identificando la relevancia de las diferentes aproximaciones inherentes a la determinación de las constantes de canje de ferritas cúbicas y hexagonales. Esta determinación constituye la base de los ampliamente extendidos modelos magnéticos multiescala que simulan la respuesta magnética de IPs nanoestructurados. Las contribuciones más relevantes de esta tesis son: (i) proporcionar la descripción fundamental de primeros principios de la ferrita hexagonal de Sr y las ferritas cúbicas de Ni, Co y Zn, en sus formas directa e inversa, identificando la enorme influencia del potencial local de Hubbard (U) en sus propiedades magnéticas; (ii) cuantificar la influencia de las aproximaciones inherentes al mapeo de energías ab initio a Hamiltonianos de Heisenberg para extraer las constantes de canje magnético; (iii) establecer la supremacía de los métodos de Monte Carlo sobre las aproximaciones de campo medio en la estimación de las temperaturas de orden magnético; (iv) demostrar el origen de la reducción de imanación de la ferrita de Ni cuando se introduce Zn sustitucional, debida a la tendencia de los átomos de Zn a ocupar posiciones de coordinación octahédrica; (v) determinar las características de las intercaras de ferritas de Co con ferritas de Mn y Ni, demostrando que la mayor fuente de modificaciones proviene de la aparición de tensiones estructurales, que afectan principalmente a la anisotropía magnética., Unión Europea, Horizon 2020, Amphibian-NMBP 720853; Ministerio de Economía y Competitividad, RTI2018-097895-C41, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Supporting Information for 3d metal doping of core@shell wüstite@ferrite nanoparticles as a promising route toward room temperature exchange bias magnets

  • Muzzi, Beatrice
  • Albino, Martin
  • Petrecca, Michele
  • Innocenti, Claudia
  • Julián Fernández, César de
  • Bertoni, Giovanni
  • Marquina, Clara
  • Ibarra, M. Ricardo
  • Sangregorio, Claudio
  • AMPHIBIAN Project ID:720853
Figures and tables: X-Ray Diffraction (XRD). High Resolution Transmission Electron Microscopy (HRTEM). Electron Energy Loss Spectroscopy (EELS) analysis. Energy Dispersive X-Ray Fluorescence (EDXRF). XRD and Magnetic properties of Ni0.18Co0.22Fe0.60O@Ni0.5Co0.7Fe1.8O4 nanoparticles., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Remanence Increase in SrFe12O19/Fe Exchange-Decoupled Hard-Soft Composite Magnets Owing to Dipolar Interactions

  • Guzmán-Mínguez, J. C.
  • Granados-Miralles, Cecilia
  • Kuntschke, Patrick
  • Julián Fernández, César de
  • Erokhin, Sergey
  • Berkov, Dmitry
  • Schliesch, Thomas
  • Fernández Lozano, José Francisco
  • Quesada, Adrián
  • AMPHIBIAN Project ID:720853
In the search for improved permanent magnets, fueled by the geostrategic and environmental issues associated with rare-earth-based magnets, magnetically hard (high anisotropy)-soft (high magnetization) composite magnets hold promise as alternative magnets that could replace modern permanent magnets, such as rare-earth-based and ceramic magnets, in certain applications. However, so far, the magnetic properties reported for hard-soft composites have been underwhelming. Here, an attempt to further understand the correlation between magnetic and microstructural properties in strontium ferrite-based composites, hard SrFe<sub>12</sub>O<sub>19</sub> (SFO) ceramics with different contents of Fe particles as soft phase, both in powder and in dense injection molded magnets, is presented. In addition, the influence of soft phase particle dimension, in the nano- and micron-sized regimes, on these properties is studied. While Fe and SFO are not exchange-coupled in our magnets, a remanence that is higher than expected is measured. In fact, in composite injection molded anisotropic (magnetically oriented) magnets, remanence is improved by 2.4% with respect to a pure ferrite identical magnet. The analysis of the experimental results in combination with micromagnetic simulations allows us to establish that the type of interaction between hard and soft phases is of a dipolar nature, and is responsible for the alignment of a fraction of the soft spins with the magnetization of the hard. The mechanism unraveled in this work has implications for the development of novel hard-soft permanent magnets., This work was supported by the European Commission through Project H2020 No. 720853 (AMPHIBIAN). It is also supported by the Spanish Ministry of Science and Innovation through Grants RTI2018-095303-BC51, RTI2018-095303-A-C52, PID2021-124585NB-C33, TED2021-130957B-C51 funded by MCIN/AEI/10.13039/501100011033, by “ERDF A way of making Europe” and by the “European Union NextGenerationEU/PRTR”. Financed by the European Union—NextGenerationEU (National Sustainable Mobility Center CN00000023, Italian Ministry of University and Research Decree n. 1033—17/06/2022, Spoke 11—Innovative Materials and Lightweighting). C.G.-M. acknowledges financial support from grant RYC2021-031181-I funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”. A.Q. acknowledges financial support from MICINN through the Ramón y Cajal Program (RYC-2017-23320)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Greener processing of SrFe12O19 ceramic permanent magnets by two-step sintering

  • Guzmán-Mínguez, J. C.
  • Fuertes de la Llave, Víctor
  • Granados-Miralles, Cecilia
  • Fernández Lozano, José Francisco
  • Quesada, Adrián
  • AMPHIBIAN Project ID:720853
With an annual production amounting to 800 kilotons, ferrite magnets constitute the largest family of permanent magnets in volume, a demand that will only increase as a consequence of the rare-earth crisis. With the global goal of building a climate-resilient future, strategies towards a greener manufacturing of ferrite magnets are of great interest. A new ceramic processing route for obtaining dense Sr-ferrite sintered magnets is presented here. Instead of the usual sintering process employed nowadays in ferrite magnet manufacturing that demands long dwell times, a shorter two-step sintering is designed to densify the ferrite ceramics. As a result of these processes, dense SrFeO ceramic magnets with properties comparable to state-of-the-art ferrite magnets are obtained. In particular, the SrFeO magnet containing 0.2% PVA and 0.6% wt SiO reaches a coercivity of 164 kA/m along with a 93% relative density. A reduction of 31% in energy consumption is achieved in the thermal treatment with respect to conventional sintering, which could lead to energy savings for the industry of the order of 7.10 kWh per year., Spanish Ministerio de Economía y Competitividad through Projects no. RTI2018-095303-A-C52 MAT2017-86450-C4-1-R, MAT2015-64110-C2-1-P, MAT2015-64110-C2-2-P, FIS2017-82415-R and through the Ramón y Cajal Contract RYC-2017-23320; and by the European Comission through Project H2020 no. 720853 (AMPHIBIAN). V.Fuertes holds a Sentinel North Excellence Postdoctoral Fellowship and acknowledges the economic support from the Sentinel North program of Université Laval, made possible, in part, thanks to funding from the Canada First Research Excellence Fund.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Hardening of Cobalt Ferrite Nanoparticles by Local Crystal Strain Release: Implications for Rare Earth Free Magnets

  • Muzzi, Beatrice
  • Lottini, Elisabetta
  • Yaacoub, Nader
  • Peddis, Davide
  • Bertoni, Giovanni
  • Julián Fernández, César de
  • Sangregorio, Claudio
  • López-Ortega, Alberto
  • AMPHIBIAN Project ID:720853
[EN] In this work, we demonstrate that the reduction of the local internal stress by a low-temperature solvent-mediated thermal treatment is an effective post-treatment tool for magnetic hardening of chemically synthesized nanoparticles. As a case study, we used nonstoichiometric cobalt ferrite particles of an average size of 32(8) nm synthesized by thermal decomposition, which were further subjected to solvent-mediated annealing at variable temperatures between 150 and 320 °C in an inert atmosphere. The postsynthesis treatment produces a 50% increase of the coercive field, without affecting neither the remanence ratio nor the spontaneous magnetization. As a consequence, the energy product and the magnetic energy storage capability, key features for applications as permanent magnets and magnetic hyperthermia, can be increased by ca. 70%. A deep structural, morphological, chemical, and magnetic characterization reveals that the mechanism governing the coercive field improvement is the reduction of the concomitant internal stresses induced by the low-temperature annealing postsynthesis treatment. Furthermore, we show that the medium where the mild annealing process occurs is essential to control the final properties of the nanoparticles because the classical annealing procedure (T > 350 °C) performed on a dried powder does not allow the release of the lattice stress, leading to the reduction of the initial coercive field. The strategy here proposed, therefore, constitutes a method to improve the magnetic properties of nanoparticles, which can be particularly appealing for those materials, as is the case of cobalt ferrite, currently investigated as building blocks for the development of rare-earth free permanent magnets., Open access funding provided by Universidad Pública de Navarra. This work was supported by EU-H2020 AMPHIBIAN Project (Grant no. 720853). A.L.O. acknowledges support from the Universidad Pública de Navarra (Grant no. PJUPNA2020)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Imán permanente, procedimiento de obtención y usos

  • Guzmán-Mínguez, J. C.
  • Moreno Arche, L.
  • Quesada, Adrián
  • Fernández Lozano, José Francisco
  • Mompean, Federico J.
  • García-Hernández, Mar
  • Pérez, Lucas
  • Ruíz Gómez, Sandra
  • Berkov, Dmitry
  • Erohkin, S.
  • AMPHIBIAN Project ID:720853
La presente invención se refiere a un imán permanente que comprende partículas magnéticas duras y una estructura magnética blanda con relación de aspecto mayor o igual a 3 y con estructura magnética de monodominio. Además, la presente invención se refiere al procedimiento de obtención de dicho imán y al uso de dicho imán como parte de un generador o un vehículo automóvil. La presente invención se encuadra en el sector de los materiales magnéticos y sus aplicaciones industriales., Peer reviewed, Consejo Superior de Investigaciones Científicas (España), Universidad Complutense de Madrid, General Numerics Research Lab, B2 Patente con examen previo
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Non-monotonic magnetic anisotropy behavior as a function of adsorbate coverage in Fe ultrathin films near the spin reorientation transition

  • Quesada, Adrián
  • Chen, Gong
  • N'Diaye, A. T.
  • Wang, P.
  • Wu, Y.Z.
  • Schmid, Andreas K.
  • AMPHIBIAN Project ID:720853
[EN] Carbon monoxide (CO) adsorption on ultrathin fcc Fe films is known to result in the rotation of magnetization from out-of-plane to in-plane. By imaging in real time the magnetic domain structure of perpendicularly magnetized Fe/(2 ML)Ni/Cu(100) films during exposure to CO, we demonstrate that the effect of adsorption on the magnetic properties occurs in two distinct stages. Initially, when CO bonds preferentially on bridge sites, perpendicular magnetic anisotropy is enhanced. Later, when on-top adsorption dominates, magnetization rotates towards in-plane in agreement with previous studies. This CO-induced spin reorientation transition (SRT) is not reversible by annealing, as CO desorption would require high temperature cycles which yield permanent structural changes in the metal films. This study demonstrates the existence of a novel non-monotonic behavior of the magnetic anisotropy as a function of adsorbate coverage. The influence of CO on ultrathin film magnetism in real time near critical points, where the anisotropy balance is extremely sensitive to small variations, reveals the previously elusive complexity of this adsorbate induced SRT., Financial support from the Spanish Ministerio de Ciencia e Innovación through Proj. No. RTI2018-095303-A-C52 and the ‘‘Ramón yCajal’’ Program (RYC-2017-23320); and from the EuropeanCommission through project AMPHIBIAN H2020-NMBP-2016- AMPHIBIAN (no. 720853). Y. Z. W. acknowledges financial support by National Natural Science Foundation of China (Grants No. 11734006 and No. 11974079), and Shanghai Municipal Science and Technology Major Project (Grant No.2019SHZDZX01), Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Unraveling the mechanism of the one-pot synthesis of exchange coupled Co-based nano-heterostructures with a high energy product

  • Muzzi, B.
  • Albino, M.
  • Innocenti, C.
  • Petrecca, M.
  • Cortigiani, B.
  • Fernández, C.D.J.
  • Bertoni, G.
  • Fernandez-Pacheco, R.
  • Ibarra, A.
  • Marquina, C.
  • Ibarra, M.R.
  • Sangregorio, C.
The development of reproducible protocols to synthesize hard/soft nano-heterostructures (NHSs) with tailored magnetic properties is a crucial step to define their potential application in a variety of technological areas. Thermal decomposition has proved to be an effective tool to prepare such systems, but it has been scarcely used so far for the synthesis of Co-based metal/ferrite NHSs, despite their intriguing physical properties. We found a new approach to prepare this kind of nanomaterial based on a simple one-pot thermal decomposition reaction of metal-oleate precursors in the high boiling solvent docosane. The obtained NHSs are characterized by the coexistence of Co metal and Co doped magnetite and are highly stable in an air atmosphere, thanks to the passivation of the metal with a very thin oxide layer. The investigation of the influence of the metal precursor composition (a mixed iron-cobalt oleate), of the ligands (oleic acid and sodium oleate) and of the reaction time on the chemical and structural characteristics of the final product, allowed us to rationalize the reaction pathway and to determine the role of each parameter. In particular, the use of sodium oleate is crucial to obtain a metal phase in the NHSs. In such a way, the one-pot approach proposed here allows the fine control of the synthesis, leading to the formation of stable, high performant, metal/ferrite NHSs with tailored magnetic properties. For instance, the room temperature maximum energy product was increased up to 19 kJ m-3 by tuning the Co content in the metal precursor.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

3d Metal doping of Core@shell Wüstite@ferrite nanoparticles as a promising route toward room temperature exchange bias magnets

  • Muzzi, Beatrice
  • Albino, Martin
  • Petrecca, Michele
  • Innocenti, Claudia
  • Fernández, César de Julián
  • Bertoni, Giovanni
  • Marquina, Clara
  • Ibarra, Manuel Ricardo
  • Sangregorio, Claudio
Nanometric core@shell wüstite@ferrite (Fe1−xO@Fe3O4) has been extensively studied because of the emergence of exchange bias phenomena. Since their actual implementation in modern technologies is hampered by the low temperature at which bias is operating, the critical issue to be solved is to obtain exchange-coupled antiferromagnetic@ferrimagnetic nanoparticles (NPs) with ordering temperature close to 300 K by replacing the divalent iron with other transition-metal ions. Here, the effect of the combined substitution of Fe(II) with Co(II) and Ni(II) on the crystal structure and magnetic properties is studied. To this aim, a series of 20 nm NPs with a wüstite-based core and a ferrite shell, with tailored composition, (Co0.3Fe0.7O@Co0.8Fe2.2O4 and Ni0.17Co0.21Fe0.62O@Ni0.4Co0.3Fe2.3O4) is synthetized through a thermal-decomposition method. An extensive morphological and crystallographic characterization of the obtained NPs shows how a higher stability against the oxidation process in ambient condition is attained when divalent cation doping of the iron oxide lattice with Co(II) and Ni(II) ions is performed. The dual-doping is revealed to be an efficient way for tuning the magnetic properties of the final system, obtaining Ni-Co doped iron oxide core@shell NPs with high coercivity (and therefore, high energy product), and increased antiferromagnetic ordering transition temperature, close to room temperature.
Docta Complutense
Publication Artículo científico (JournalArticle)

Boosting the tunable microwave scattering signature of sensing array platforms consisting of amorphous ferromagnetic Fe_2.25Co_72.75Si_10B_15 microwires and its amplification by intercalating cu microwires

  • Archilla Sanz, Diego
  • López Sánchez, Jesús
  • Hernando Grande, Antonio
  • Navarro Palma, Elena
  • Marín Palacios, María Pilar
The following work addresses new configurations of sensing array platforms that are composed of Co-based amorphous ferromagnetic microwires (MWs) to obtain an enhanced modulation of the microwave scattering effects through the application of low strength DC or AC magnetic fields. An amorphous MW is an ultrasoft ferromagnetic material (coercivity similar to 0.2 Oe) with a circumferential magnetic anisotropy that provides a high surface sensitivity when it is subjected to an external magnetic field. Firstly, microwave scattering experiments are performed as a function of the length and number of MWs placed parallel to each other forming an array. Subsequently, three array configurations are designed, achieving high S_21 scattering coefficients up to about -50 dB. The influence of DC and AC magnetic fields on S_21 has been analyzed in frequency and time domains representation, respectively. In addition, the MWs sensing array has been overlapped by polymeric surfaces and the variations of their micrometric thicknesses also cause strong changes in the S_21 amplitude with displacements in the frequency that are associated to the maximum scattering behavior. Finally, a new concept for amplifying microwave scattering is provided by intercalating Cu MWs into the linear Co-based arrays. The designed mixed system that is composed by Co-based and Cu MWs exhibits a higher S_21 coefficient when compared to a single Co-based MW system because of higher electrical conductivity of Cu. However, the ability to modulate the resulting electromagnetic scattering is conferred by the giant magneto-impedance (GMI) effects coming from properties of the ultrasoft amorphous MWs. The mixed array platform covers a wide range of sensor applications, demonstrating the feasibility of tuning the S_21 amplitude over a wide scattering range by applying AC or DC magnetic fields and tuning the resonant frequency position according to the polymeric slab thickness.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Geometrically defined spin structures in ultrathin Fe3O4 with bulk like magnetic properties

  • Ruiz-Gómez, Sandra|||0000-0002-9665-2059
  • Pérez, Lucas|||0000-0001-9470-7987
  • Mascaraque, Arantzazu
  • Quesada, Adrian
  • Prieto Recio, Pilar|||0000-0001-8978-5139
  • Palacio, Irene|||0000-0002-3345-4848
  • Martín García, Laura|||0000-0001-5743-4473
  • Foerster, Michael|||0000-0002-4147-6668
  • Aballe, Lucía|||0000-0003-1810-8768
  • Figuera, Juan de la|||0000-0002-7014-4777
We have grown high quality magnetite microcrystals free from antiphase boundaries on Ru(0001) by reactive molecular beam epitaxy, conserving bulk magnetic properties below 20 nm thickness. Magnetization vector maps are obtained by X-ray spectromicroscopy and compared with micromagnetic simulations. The observed domain configurations are dictated purely by shape anisotropy, overcoming the possible influences of (magneto)crystalline anisotropy and defects, thus demonstrating the possibility of designing spin structures in ultrathin, magnetically soft magnetite at will.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Structure and magnetism of ultrathin nickel-iron oxides grown on Ru(0001) by high-temperature oxygen-assisted molecular beam epitaxy

  • Mandziak, Anna|||0000-0001-7033-7862
  • Figuera, Juan de la|||0000-0002-7014-4777
  • Ruiz-Gómez, Sandra|||0000-0002-9665-2059
  • Soria, Guiomar D.
  • Pérez, Lucas|||0000-0001-9470-7987
  • Prieto Recio, Pilar|||0000-0001-8978-5139
  • Quesada, Adrian
  • Foerster, Michael|||0000-0002-4147-6668
  • Aballe, Lucía|||0000-0003-1810-8768
We demonstrate the preparation of ultrathin Fe-rich nickel ferrite (NFO) islands on a metal substrate. Their nucleation and growth are followed in situ by low-energy electron microscopy (LEEM). A comprehensive characterization is performed combining LEEM for structural characterization and PEEM (PhotoEmission Electron Microscopy) with synchrotron radiation for chemical and magnetic analysis via X-ray Absorption Spectroscopy and X-ray Magnetic Circular Dichroism (XAS-PEEM and XMCD-PEEM, respectively). The growth by oxygen-assisted molecular beam epitaxy takes place in two stages. First, islands with the rocksalt structure nucleate and grow until they completely cover the substrate surface. Later three-dimensional islands of spinel phase grow on top of the wetting layer. Only the spinel islands show ferromagnetic contrast, with the same domains being observed in the Fe and Ni XMCD images. The estimated magnetic moments of Fe and Ni close to the islands surface indicate a possible role of the bi-phase reconstruction. A significant out-of-plane magnetization component was detected by means of XMCD-PEEM vector maps.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Strontium hexaferrite platelets, a comprehensive soft X-ray absorption and Mössbauer spectroscopy study

  • Soria, G. D.
  • Jenus, P.
  • Marco, J. F.
  • Mandziak, Anna|||0000-0001-7033-7862
  • Sanchez-Arenillas, M.
  • Moutinho, F.
  • Prieto, J. E.
  • Prieto Recio, Pilar|||0000-0001-8978-5139
  • Cerdá, J.
  • Tejera-Centeno, C.
  • Gallego, Soledad|||0000-0002-4712-9624
  • Foerster, Michael|||0000-0002-4147-6668
  • Aballe, Lucía|||0000-0003-1810-8768
  • Valvidares, Manuel|||0000-0003-4895-8114
  • Vasili, Hari Babu|||0000-0002-3356-6436
  • Pereiro, Eva|||0000-0001-7626-5935
  • Quesada, Adrian
  • de la Figuera, Juan
Platelets of strontium hexaferrite (SrFeO, SFO), up to several micrometers in width, and tens of nanometers thick have been synthesized by a hydrothermal method. They have been studied by a combination of structural and magnetic techniques, with emphasis on Mössbauer spectroscopy and X-ray absorption based-measurements including spectroscopy and microscopy on the iron-L edges and the oxygen-K edge, allowing us to establish the differences and similarities between our synthesized nanostructures and commercial powders. The Mössbauer spectra reveal a greater contribution of iron tetrahedral sites in platelets in comparison to pure bulk material. For reference, high-resolution absorption and dichroic spectra have also been measured both from the platelets and from pure bulk material. The O-K edge has been reproduced by density functional theory calculations. Out-of-plane domains were observed with 180° domain walls less than 20 nm width, in good agreement with micromagnetic simulations.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Tuning the Néel temperature in an antiferromagnet, the case of NiCoO microstructures

  • Mandziak, Anna|||0000-0001-7033-7862
  • D. Soria, Guiomar
  • Prieto, José Emilio|||0000-0003-2092-6364
  • Prieto Recio, Pilar|||0000-0001-8978-5139
  • Granados-Miralles, Cecilia|||0000-0002-3679-387X
  • Quesada, Adrian
  • Foerster, Michael|||0000-0002-4147-6668
  • Aballe, Lucía|||0000-0003-1810-8768
  • de la Figuera, Juan
We show that it is possible to tune the Néel temperature of nickel(II)-cobalt(II) oxide films by changing the Ni to Co ratio. We grow single crystalline micrometric triangular islands with tens of nanometers thickness on a Ru(0001) substrate using high temperature oxygen-assisted molecular beam epitaxy. Composition is controlled by adjusting the deposition rates of Co and Ni. The morphology, shape, crystal structure and composition are determined by low-energy electron microscopy and diffraction, and synchrotron-based x-ray absorption spectromicroscopy. The antiferromagnetic order is observed by x-ray magnetic linear dichroism. Antiferromagnetic domains up to micrometer width are observed.