Skip to main content

LUCHANDO CONTRA LA DEGRADACION DEL PATRIMONIO PETREO DEBIDO AL CAMBIO CLIMATICO CON RECUBRIMIENTOS DE NANOMATERIALES SOSTENIBLES

PID2020-120439RA-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2020
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE LEÓN

Resultados relacionados

Resultados totales (Incluyendo duplicados): 23
Encontrada(s) 1 página(s)

BULERIA. Repositorio Institucional de la Universidad de León
Publication Artículo científico (JournalArticle)

Performance Study of Graphene Oxide as an Antierosion Coating for Ornamental and Heritage Dolostone

  • Martínez García, Rebeca
  • González Campelo, David
  • Fraile Fernández, Fernando Jorge
  • Castañón García, Ana María
  • Caldevilla Domínguez, Pablo
  • Giganto Fernández, Sara
  • Ortiz Marqués, Almudena
  • Zelli, Flavia
  • Calvo Peña, Víctor
  • González Domínguez, José Miguel
  • Fernández Raga, María
doi:10.1002/admt.202300486 pertenece al artículo y doi:10.1002/admt.202370094 pertenece a la portada del número de la revista en la que se publicó dicho artículo., [EN] Concern for the perpetuation of stone monuments is deeply ingrained in humans; however, despite the attempts made in this field, there is still a great deal of effort needed to bring about advancements in the conservation of ornamental stone. Erosive agents, such as rain, extreme temperatures, and chemical and biological agents, threaten our stone heritage and gradually wear away buildings, sculptures, and other monuments found all around the world. Limestone and dolostone have been widely used throughout history, given their ease of extraction and workability. Nevertheless, these properties make them particularly vulnerable to the aforementioned erosive agents, for which the main solution at present is costly and time-consuming restoration. Given the scarcity of effective and durable agents to prevent the deterioration of ornamental and heritage stones, and as graphene oxide (GO) has recently shown impressive effectiveness for this task, this work will further explore the viability of GO as a protective coating for monumental dolostone. For this purpose, GO is sprayed over dolostone surfaces by water dispersion with no adjuvants. The coating performance is assessed in terms of thermal stress, optical inspection (structured light 3D scanner), colorimetry, leachate analysis, and electron microscopy. The main results show that spray-coated GO over stone surfaces creates a highly protective and durable barrier without altering their aesthetic qualities., SI, This research received funding from the University of León (ULE-PoC 2018) and Fundación General de la ULE y de la Empresa (FGULEM) under projects 2019/00149/001 and 2020. This research was also funded through an awarded MICINN project (PID2020-120439RA-I00). The authors are also thankful to the “Applied innovation against climate change and other aggressions on stone monuments (PRESERVARTE)” project of the Regional Ministry of Culture and Tourism of Castilla y León, which will be used to complement this research in the future.
BULERIA. Repositorio Institucional de la Universidad de León
Publication Artículo científico (JournalArticle)

Adaptation of a Standard Method for Water Absorption Testing of Stone Materials: The Case of a Hydrophilic Protective Coating

  • Búrdalo Salcedo, Gabriel
  • Rodríguez, Indira
  • Fernández Raga, María
  • Fernández Raga, Sagrario
  • Rodríguez Fernández, Carlos
  • González Domínguez, José Miguel
Supplementary Materials: The following supporting information can be downloaded at https://www.mdpi.com/article/10.3390/ma16124228/s1, Video S1: Use of surgical drape to remove the excess water after the immersion step., [EN] The historical stone heritage that we inherit must be passed on to future generations, not only in the same conditions that we found it but, if possible, in better ones. Construction also demands better and more durable materials, often stone. The protection of these materials requires knowledge of the types of rocks and their physical properties. The characterization of these properties is often standardized to ensure the quality and reproducibility of the protocols. These must be approved by entities whose purpose is to improve the quality and competitiveness of companies and to protect the environment. Standardized water absorption tests could be envisaged to test the effectiveness of certain coatings in protecting natural stone against water penetration, but we found that some steps of these protocols neglect any surface modification of the stones, and hence may not be completely effective when a hydrophilic protective coating (i.e., graphene oxide) is present. In this work, we analyze the UNE 13755/2008 standard for water absorption and propose alternative steps to adapt the norm for use with coated stones. The properties of coated stones may invalidate the interpretation of the results if the standard protocol is applied as is, so here we pay special attention to the characteristics of the coating applied, the type of water used for the test, the materials used, and the intrinsic heterogeneity of the specimens, SI, This research received funding from the Universidad de León (ULE-PoC 2023) and “Fundación General de la ULE y de la Empresa (FGULEM)” under project 2019/00149/001, from the “Consejería de Educación-Desafíos 2020” and the “Consejería de Turismo-PRESERVARTE project” of the Region of Castilla y León, and the granted MICINN project (PID2020-120439RA-I00).
BULERIA. Repositorio Institucional de la Universidad de León
Publication Artículo científico (JournalArticle)

Splash Erosion on Terraces, Does It Make a Difference If the Terracing Is Done before or after a Fire?

  • Fernández Raga, María
  • Martins, Martinho António dos Santos
  • Marcos Porras, Elena María
  • Fraile Laiz, Roberto
  • Keizer, Jan Jacob
This article belongs to the Section Soil and Hydrology, [EN] Terraces are a common Mediterranean feature influencing soils, slopes and subsurface hydrology; however, little is known about their impact on erosion processes, especially in humid regions. The purpose of this study was to assess how terracing after a fire affected erosion processes such as splash erosion. For 8 months, the study monitored splash erosion in three terraced plots, one plot under pre-fire conditions and the other two under post-fire conditions. Assessment of the impact of the terracing treatment in such plots was carried out by the installation of two different splash erosion quantitative systems: cups and funnels. An analysis of the splash data obtained in 17 rainfall events and meteorological data collected during each one of those periods was then performed. A significant positive correlation between the amount of rainfall and the splash erosion was observed. The two splash sampling systems show a high degree of concordance; however, the funnel-type model seems to be the most appropriate when it comes to preventing loss of splashed soil samples. The post-fire treatment with terracing leads to a smaller stability of surface soil aggregates, causing higher splash erosion rates. Sampling using the funnel system collects three times the amount of splashed soil than that collected by the cup system, although both systems correlate appropriately with the meteorological parameters, SI, This study has been supported by the projects EROSFIRE (POCTI/AGR/60354/2004) and EROSFIRE-II (PTDC/AGR-CFL/70968/2006), funded by the Portuguese Foundation for Science and Technology (FCT) with co-funding by FEDER through the POCI2010 Program. The Junta de Castilla y León has also contributed to this Project with Grant LE014A07, and the Spanish Ministry of Education with Grant TEC2007-63216. This research was also funded partially by project PID2020-120439RA-I00 financed by MCIN/AEI/10.13039/501100011033
BULERIA. Repositorio Institucional de la Universidad de León
Publication Artículo científico (JournalArticle)

Study about the influence of diatoms on the durability of monumental limestone

  • Merino Maldonado, Daniel
  • Martínez García, Rebeca
  • Baladrón Blanco, Víctor
  • Prado Gil, Jesús de
  • Fraile Fernández, Fernando Jorge
  • Fernández Raga, María
  • Palencia Coto, María Covadonga
  • Juan Valdés, Andrés
[EN] This study focuses on the evaluation of the effects of a natural treatment of limestone rock samples using microalgae known as diatoms. A total of 18 samples in the form of 50 mm cubes, carved from limestone rock from Boñar (Spain), were analyzed, divided into experimental and control groups with an equal number of samples. Through various tests evaluating porosity, water absorption, frost resistance, and salt crystallization, diatom-treated samples were found to show higher porosity and water absorption compared with the control samples, especially when the entire sample was analyzed as a whole. However, in tests focusing on the surface side most exposed to biodeposition, reduced water absorption was observed in the treated samples, suggesting an improvement in their antiabsorption properties. In addition, slightly higher frost resistance was detected in the treated samples. For this reason, this study provides valuable information on the potential of diatoms to influence the properties of limestone rocks, which can serve as a basis for future research in this field and for the development of more effective treatments to improve the characteristics of rocks used in various applications, SI, This research was funded by the Spanish Ministry of Science and Innovation (MICINN) through project PID2020-120439RA-I00. The authors also wish to acknowledge the support of the project “Applied innovation against climate change and other aggressions on stone monuments (PRESERVARTE)”, funded by the Regional Ministry of Culture and Tourism of Castilla y León, which will serve to complement this research in the future. Additional support was provided by the Junta de Castilla y León through grant LE030G24
BULERIA. Repositorio Institucional de la Universidad de León
Publication Artículo científico (JournalArticle)

Post-fire short-term treatments on a hillslope burnt soil: a case in the NW Iberian Atlantic transition region

  • Fernández Raga, María
  • Alcalde Aparicio, Sara
  • Serrano Bernardo, Francisco Antonio
  • Kavian, Ataollah
  • Cerdá, Artemi
  • Rodrigo Comino, Jesús
Funding for open access publishing: Universidad de Granada/CBUA., [EN] Forest fires pose a significant threat to rural areas, affecting ecosystems, property, infrastructure, and human lives. Effective post-fire management strategies are crucial for short-term ecosystem and community recovery. This study evaluated the effectiveness of three post-fire interventions in reducing soil erosion and runoff within a temperate Atlantic–transition climate, focusing on a shrubland hillslope near organic vineyards in Corullón, NW Spain, after a moderate-severity fire. The research aimed to (i) compare the effects of plowing, straw mulching, and no intervention (control) on post-fire soil recovery, and (ii) assess the cost-effectiveness and environmental impacts of these treatments. Ten experimental plots were randomly assigned to plowing (n = 4), straw mulching (n = 4), or control (n = 2). Seventeen rainfall events were monitored between 15 days and six months post-fire. Results showed no significant differences in erosion or runoff reduction among treatments. Natural vegetation recovery, assessed visually, was rapid across all plots, with erosion and runoff stabilizing within two months. These findings suggest that, under the specific conditions of this temperate climate and moderate fire severity, early intervention techniques may not be necessary. The study concludes that natural regeneration can be a viable and cost-effective post-fire management strategy in regions with favorable environmental conditions for soil recovery, potentially reducing the need for intensive interventions., SI
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Extraordinary protective efficacy of graphene oxide over the stone-based cultural heritage

  • González Campelo, D.
  • Fernández-Raga, María
  • Gómez Gutiérrez, Álvaro
  • Guerra Romero, M. I.
  • González Domínguez, José Miguel
8 figures.-- Supplementary information available., The deterioration of monumental stones is a common event occurring to our historical and cultural heritage, threatening the preservation of our social identity and its legacy to future generations. The prolonged effect of inclement weather is very harmful for particular stone materials such as limestone and dolomite, to which a truly effective and durable protective agent has not yet been found. Herein, an unprecedented performance of graphene oxide (GO) for the shielding of carbonated ornamental stones against environmental aggressions, namely intense rainfall and extreme temperatures, is demonstrated. A simple additive-free aqueous suspension of GO serves as the perfect coating, exceedingly preventing from any kind of wear or erosion after different climatic simulations. Additionally, the stones’ original aesthetics is not altered (a critical issue in monuments), together with an improvement in their mechanical properties, reasserting the unique potential of GO for conserving exposed stone-based monuments in an affordable, accessible, and revolutionary way., This research received funding from the Univerisdad de León (ULE-PoC 2018) and “Fundación General de la ULE y de la Empresa (FGULEM)” under projects 2019/00149/001 and 2020. J.M.G.-D. is grateful to the Spanish Ministry of Science, Innovation and Universities for his “Juan de la Cierva-Incorporación” research grant and associated research funds (IJCI-2016-27789). In loving memory of Prof. Jose L. García-Fierro, whose support with the XPS characterization was helpful for the development of this work. The authors also thank Mr. Adrián Domínguez Gutiérrez for his assistance during the photogrammetric processing of some samples. Invaluable assistance from Dr. Rebeca Martínez García and Dr. Sagrario Fernández Raga is highly indebted. Further research will be funded through a recently granted MICINN project (PID2020-120439RA-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Synthesis and processing of nanomaterials mediated by living organisms

  • Calvo Peña, Víctor
  • González Domínguez, José Miguel
  • Benito, Ana M.
  • Maser, Wolfgang K.
5 figures, 1 scheme., Green living nanofactories: Nanomaterials (NMs) and nanocomposites are typically prepared by procedures that are incompatible with green chemistry and sustainability principles. But some living entities, from single cells to higher organisms, are able to synthesize and process NMs very efficiently under milder conditions. In this Minireview, the advances and prospects of this growing trend are discussed and summarized., Nanomaterials offer exciting properties and functionalities. However, their production and processing frequently involve complex methods, cumbersome equipment, harsh conditions, and hazardous media. The capability of organisms to accomplish this using mild conditions offers a sustainable, biocompatible, and environmentally friendly alternative. Different nanomaterials such as metal nanoparticles, quantum dots, silica nanostructures, and nanocellulose are being synthesized increasingly through living entities. In addition, the bionanofabrication potential enables also the in situ processing of nanomaterials inside biomatrices with unprecedented outcomes. In this Minireview we present a critical state-of-the-art vision of current nanofabrication approaches mediated by living entities (ranging from unicellular to higher organisms), in order to expand this knowledge and scrutinize future prospects. An efficient interfacial interaction at the nanoscale by green means is within reach through this approach., Financial support from Spanish MICINN/AEI under projects PID2019-104272RB-C51/AEI/10.13039/501100011033 and PID2020-120439RA-I00, as well as from Gobierno de Aragón (DGA, Grupo Reconocido DGA-T03_20R) is acknowledged. V.C. gratefully thanks the DGA for funding his PhD contract (Ref. CUS/581/2020)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of nanocellulose polymorphism on electrochemical analytical performance in hybrid nanocomposites with non-oxidized single-walled carbon nanotubes

  • Dortez, Silvia
  • Sierra, Tania
  • Álvarez Sánchez, Miguel Ángel
  • González Domínguez, José Miguel
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Crevillén, Agustín G.
  • Escarpa, Alberto
4 figures, 2 tables., Two cellulose nanocrystals/single-walled carbon nanotube (CNC/SW) hybrids, using two cellulose polymorphs, were evaluated as electrochemical transducers: CNC type I (CNC-I/SW) and CNC type II (CNC-II/SW). They were synthesized and fully characterized, and their analytical performance as electrochemical sensors was carefully studied. In comparison with SWCNT-based and screen-printed carbon electrodes, CNC/SW sensors showed superior electroanalytical performance in terms of sensitivity and selectivity, not only in the detection of small metabolites (uric acid, dopamine, and tyrosine) but also in the detection of complex glycoproteins (alpha-1-acid glycoprotein (AGP)). More importantly, CNC-II/SW exhibited 20 times higher sensitivity than CNC-I/SW for AGP determination, yielding a LOD of 7 mg L−1.These results demonstrate the critical role played by nanocellulose polymorphism in the electrochemical performance of CNC/SW hybrid materials, opening new directions in the electrochemical sensing of these complex molecules. In general, these high-active-surface hybrids smartly exploited the preserved non-oxidized SW conductivity with the high aqueous dispersibility of the CNC, avoiding the use of organic solvents or the incorporation of toxic surfactants during their processing, making the CNC/SW hybrids promising nanomaterials for electrochemical detection following greener approaches., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This work has been financially supported by the TRANSNANOAVANSENS program from the Community of Madrid (P2018/NMT-4349), and the Spanish Ministry of Economy and Competitiveness (CTQ2017-86441-C2-1-R). Additional funding support was from Spanish MINEICO/MICINN under project with references ENE2016-79282-C5-1-R (AEI/FEDER/UE), PID2019-104272RB-C51/AEI/10.13039/501100011033, and PID2020-120439RA-I00. Funding support from Gobierno de Aragón (Grupo Reconocido T03_20R) is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The use of high-speed cameras as a tool for the characterization of raindrops in splash laboratory studies

  • Fernández-Raga, María
  • Cabeza-Ortega, Marco
  • González-Castro, Víctor
  • Peters, Piet
  • Commelin, Meindert
  • Campo, Julián
© 2021 by the authors., Measuring the characteristics of raindrops is essential for different processes studies. There have been many methods used throughout history to measure raindrops. In recent years, automatic image recognition and processing systems have been used with high-speed cameras to characterize rainfall by obtaining the spectrum of droplet sizes and their speeds and thus being able to use this technology to calibrate rainfall simulators. In this work, two phases were carried out: in the first one, individual drops with terminal speeds of different sizes were measured and processed both in speed and in shape with a high-speed camera; and in the second phase, a calibration procedure was designed but in multidrop images, determining the characteristics of the drops produced by a rain simulator. According to results, the real shape of each drop depending on the size was determined, from round to ovaloid shapes, and the terminal velocity of water drops with different sizes was measured. Based on the rain images used to calibrate a rainfall simulator, it was observed that, with a higher intensity of rain, the drops produced were smaller, which contrasts with real rain, in which just the opposite happens. This calibration evaluates their resemblance to reality, calculates the real kinetic energy of the rain they produce and see if they can be used to model events in nature., This research was fund by project PID2020-120439RA-I00 financed by MCIN/ AEI /10.13039/501100011033.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Preparation of cellulose nanocrystals: controlling the crystalline type by one-pot acid hydrolysis

  • Calvo Peña, Víctor
  • Álvarez Sánchez, Miguel Ángel
  • Güemes, Lucas
  • Martínez-Barón, Carlos
  • Baúlde, Sandra
  • Criado, A.
  • González Domínguez, José Miguel
  • Maser, Wolfgang K.
  • Benito, Ana M.
6 figures.-- Supplementary information available., Cellulose nanocrystals (CNCs) have aroused increasing interest owing to their renewable origin and excellent properties derived from their size and morphology. Based on their chain orientation, CNCs can be prepared as two main allomorphs (I or II). However, achieving pure CNC allomorphs still requires enhanced control on the CNCs synthesis process and improved understanding of the involved reaction parameters. In this work, we study in detail a set of parameters for CNC synthesis using one-pot acid hydrolysis and evaluate their influence on the outcome with respect to yield, purity, and repeatability. We also demonstrate that a fast, nondestructive, and accurate methodology based on dynamic light scattering is an efficient alternative to the usual structural analysis of the synthesis outcome. Finally, we provide an improved protocol to reliably obtain each allomorph with mass yields of 25% for type I and 40% for type II. Emphasis is put on the reduction of the environmental impact and the overall preparation time., Financial support from Spanish MICINN/AEI under Projects PID2019-104272RB-C51/AEI/10.13039/501100011033 and PID2020-120439RA-I00, as well as from Gobierno de Aragón (DGA, Grupo Reconocido DGA-T03_20R) is acknowledged. V.C. and M.A.A. gratefully thank the DGA for funding their Ph.D. contracts (ref. CUS/581/2020 and ref. IIU/796/2019). A.C. thanks MICINN for his research grant (Ramon y Cajal No. RYC2020-030183-I). S.B. thanks MICINN for funding (PID2020-117885GA-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Statistical study of the effectiveness of surface application of graphene oxide as a coating for concrete protection

  • Antolín Rodríguez, Andrea
  • Merino Maldonado, Daniel
  • Rodríguez González, Álvaro
  • Fernández-Raga, María
  • González Domínguez, José Miguel
  • Juan-Valdés, Andrés
  • García-González, Julia
5 figures, 2 tables.-- This article belongs to the Special Issue "Surface Biotreatment of Building Materials"., Improving the protection of concrete by applying graphene oxide (GO) as a surface treatment has become the objective of the present study. This study focuses on performing a statistical analysis to study different levels of GO application as an exterior coating, thus observing the effectiveness of the coating and the optimization of the treatment material for concrete protection. Four tests were performed to define concrete durability, such as pressurized water penetration, capillary absorption, freeze-thaw resistance and carbonation resistance. The results showed an increase in concrete durability with any level of GO application on the surface, considering that the optimum amount of application for water impermeability and freeze-thaw resistance is 26.2 µg/cm2, since it was possible to reduce pressurized water penetration by 45%, capillary water absorption by 57% and freeze-thaw detachment by 25%. However, the optimum application rate for carbonation resistance is 52.4 µg/cm2, reducing carbonation by almost 60%. In conclusion, if the concrete is going to be exposed to less aggressive environments, the application of a mild surface coating of GO is sufficient for its protection, and if the concrete is going to be exposed to more aggressive environments, it is necessary to increase the amount of GO. The performance of GO as a coating significantly increased the degree of protection of the concrete, increasing its service life and proving to be a promising treatment for concrete surface protection., A.A.R. greatfully acknowledge to Aid from the Junta de Castilla y Leon to finance the pre-doctoral hiring of research personnel, co-financed by the European Social Fund, resolved in the ORDER EDU/875/2021, of July 13. D.M.M. greatfully acknowledge to Aid from the Junta de Castilla y Leon to finance the pre-doctoral hiring of research personnel, co-financed by the European Social Fund, resolved in the ORDEN EDU/601/2020, of July 3. M.F.R and J.M.G.-D. greatfully acknowledge Spanish Ministry of Science and Innovation (MICINN) and the Spanish Research Agency (AEI) for the financial support provided by the NANOSHIELD project (PID2020-120439RA-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Performance study of graphene oxide as an antierosion coating for ornamental and heritage dolostone

  • Martínez García, Rebeca
  • González Campelo, D.
  • Fraile-Fernández, Fernando J.
  • Castañón, Ana M.
  • Caldevilla, Pablo
  • Giganto, Sara
  • Ortiz Marqués, Almudena
  • Zelli, Flavia
  • Calvo Peña, Víctor
  • González Domínguez, José Miguel
  • Fernández-Raga, María
9 figures, 2 tables.-- Supplementary information available., Concern for the perpetuation of stone monuments is deeply ingrained in humans; however, despite the attempts made in this field, there is still a great deal of effort needed to bring about advancements in the conservation of ornamental stone. Erosive agents, such as rain, extreme temperatures, and chemical and biological agents, threaten our stone heritage and gradually wear away buildings, sculptures, and other monuments found all around the world. Limestone and dolostone have been widely used throughout history, given their ease of extraction and workability. Nevertheless, these properties make them particularly vulnerable to the aforementioned erosive agents, for which the main solution at present is costly and time-consuming restoration. Given the scarcity of effective and durable agents to prevent the deterioration of ornamental and heritage stones, and as graphene oxide (GO) has recently shown impressive effectiveness for this task, this work will further explore the viability of GO as a protective coating for monumental dolostone. For this purpose, GO is sprayed over dolostone surfaces by water dispersion with no adjuvants. The coating performance is assessed in terms of thermal stress, optical inspection (structured light 3D scanner), colorimetry, leachate analysis, and electron microscopy. The main results show that spray-coated GO over stone surfaces creates a highly protective and durable barrier without altering their aesthetic qualities., This research received funding from the University of León (ULE-PoC 2018) and Fundación General de la ULE y de la Empresa (FGULEM) under projects 2019/00149/001 and 2020. This research was also funded through an awarded MICINN project (PID2020-120439RA-I00). The authors are also thankful to the “Applied innovation against climate change and other aggressions on stone monuments (PRESERVARTE)” project of the Regional Ministry of Culture and Tourism of Castilla y León, which will be used to complement this research in the future., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Adaptation of a standard method for water absorption testing of stone materials: the case of a hydrophilic protective coating

  • Búrdalo, Gabriel
  • Rodríguez, Indira
  • Fernández-Raga, María
  • Fernández Raga, Sagrario
  • Rodríguez Fernández, Carlos
  • González Domínguez, José Miguel
10 figures.-- Supplementary material: Video S1: Use of surgical drape to remove the excess water after the immersion step., The historical stone heritage that we inherit must be passed on to future generations, not only in the same conditions that we found it but, if possible, in better ones. Construction also demands better and more durable materials, often stone. The protection of these materials requires knowledge of the types of rocks and their physical properties. The characterization of these properties is often standardized to ensure the quality and reproducibility of the protocols. These must be approved by entities whose purpose is to improve the quality and competitiveness of companies and to protect the environment. Standardized water absorption tests could be envisaged to test the effectiveness of certain coatings in protecting natural stone against water penetration, but we found that some steps of these protocols neglect any surface modification of the stones, and hence may not be completely effective when a hydrophilic protective coating (i.e., graphene oxide) is present. In this work, we analyze the UNE 13755/2008 standard for water absorption and propose alternative steps to adapt the norm for use with coated stones. The properties of coated stones may invalidate the interpretation of the results if the standard protocol is applied as is, so here we pay special attention to the characteristics of the coating applied, the type of water used for the test, the materials used, and the intrinsic heterogeneity of the specimens., This research received funding from the Universidad de León (ULE-PoC 2023) and “Fundación General de la ULE y de la Empresa (FGULEM)” under project 2019/00149/001, from the “Consejería de Educación-Desafíos 2020” and the “Consejería de Turismo-PRESERVARTE project” of the Region of Castilla y León, and the granted MICINN project (PID2020-120439RA-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Oil-in-water pickering emulsions stabilized with nanostructured biopolymers: a venue for templating bacterial cellulose

  • Calvo Peña, Víctor
  • Fuentes Varela, Laura
  • Berdejo, Daniel
  • González Domínguez, José Miguel
  • Maser, Wolfgang K.
  • Benito, Ana M.
Pickering emulsions (PEs) differ from conventional emulsions in the use of solid colloidal particles as stabilizing agents instead of traditional amphiphilic molecules. Nanostructured biopolymers (NBs) emerge as a promising alternative for PE stabilization owing to their remarkable biocompatibility, abundant availability, and low cost. To explore this potential, a study is herein presented, in which cellulose nanocrystals (CNCs), both type I and type II allomorphs, and chitin nanocrystals (ChNCs) were used for stabilizing oil-in-water PEs prepared by the use of ultrasound. Sunflower oil was selected as the oil phase as it offers the advantages of being edible, renewable, and inexpensive. By utilizing ζ-potential, static light diffraction, and visual observations, we determined the optimal oil/water ratio for each type of NB to obtain stable emulsions after 14 days. The optimized PEs were used to form bacterial nanocellulose composites through emulsion templating. To our knowledge, this study represents a pioneering work in exploiting oil-in-water PEs for this approach. Additionally, it entails the first utilization of nonmercerized type II CNCs as stabilizers for PEs, while also establishing a direct comparison among the most relevant NBs. The resulting composites exhibited a unique morphology, composed of larger pores compared to standard bacterial nanocellulose aerogels. These findings highlight the notable potential of NBs as stabilizers for PEs and their ability to generate green nanocomposites with tailored properties., This research was funded by Spanish MICINN/AEI under projects PID2019-104272RB-C51/AEI/10.13039/501100011033 and PID2020-120439RA-I00, from Spanish CSIC (PIE iniciación ref. 202280I007), and support from Gobierno de Aragón (DGA, Grupo Reconocido DGA-T03_23R) is acknowledged. Víctor Calvo thanks the DGA for funding their Ph.D. contracts (Ref. CUS/581/2020)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The aqueous processing of carbon nanofibers via cellulose nanocrystals as a green path towards e-textiles with n-type thermoelectric behaviour

  • Calvo Peña, Víctor
  • Paleo, A. J.
  • González Domínguez, José Miguel
  • Muñoz, Edgar
  • Krause, Beate
  • Pötschke, Petra
  • Maser, Wolfgang K.
  • Benito, Ana M.
9 figures, 2 tables.-- Supplementary information available., Cellulose nanocrystals (CNCs) are a nanostructured biopolymer with unique properties, such as high strength and water stability. These properties make CNCs ideal for diverse applications, including dispersing agents for hydrophobic carbon nanomaterials in water. Specifically, carbon nanomaterials can be integrated into textiles to produce flexible electronic wearables with excellent performance. However, the necessary prerequisite of achieving stable liquid dispersions of these carbon nanomaterials, such as nanofibers (CNFs) typically involves the use of organic solvents or high concentrations of hazardous surfactants in water. Thus, in this study, for the first time, CNCs were successfully used to prepare CNFs aqueous dispersions, referred to as inks, at CNF concentrations up to 0.7 g L−1. As a proof of principle, these inks were then integrated into a cotton fabric using a facile dip coating and drying strategy, resulting in an e-textile with a negative Seebeck coefficient. Furthermore, a theoretical model was developed to describe the nonlinear Seebeck coefficient of the nanocomposite textile, shedding light on the physics governing the electrical conductivity and Seebeck coefficient over a temperature range from 30 °C to 100 °C. These promising results pave the way towards the development of environmentally friendly and durable CNF aqueous dispersions and wearable e-textiles., Financial support from Spanish MCIN/AEI under projects PID2019-104272RB-C51/AEI/10.13039/501100011033 and PID2020-120439RA-I00, from Spanish CSIC (PIE iniciación ref. 202280I007), as well as from Gobierno de Aragón (DGA, Grupo Reconocido DGA-T03_23R) is acknowledged. Vícto Calvo thanks the DGA for funding his PhD contract (Ref. CUS/581/2020). Antonio J. Paleo gratefully acknowledges support from FCT-Foundation for Science and Technology by the “plurianual” 2020–2023 Project UIDB/00264/2020, and European COST Action EsSENce CA19118 for its support with the Short Term Scientific Mission (STSM) grant E-COST-GRANT-CA19118-0ed3a197 at IPF (Dresden). E. Muñoz acknowledges funding from ANID ANILLO ACT/192023 and Fondecyt No 1230440., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Performance of graphene oxide as a water-repellent coating nanomaterial to extend the service life of concrete structures

  • Antolín Rodríguez, Andrea
  • Merino Maldonado, Daniel
  • González Domínguez, José Miguel
  • Fernández-Raga, María
  • Morán del Pozo, J. Mª.
  • García-González, Julia
  • Juan-Valdés, Andrés
10 figures, 4 tables., Surface treatments help to protect the built heritage against damage (environmental, accidental, etc.), reducing repair and restitution costs and increasing the useful life of building materials. The use of nanomaterials is currently the most important field of research in surface treatment technology for the preservation of building materials and, more specifically, to improve their durability and prevent their deterioration, extending their useful life. This paper studies the influence of a graphene oxide (GO) suspension as a surface treatment on the properties of concrete. The results indicate that, at best, surface treatment with GO can decrease both the water absorption and capillary absorption of concrete by about 15 %. The increase in the amount of GO deposited as a surface treatment leads to a further reduction in concrete water absorption. It is shown that, at best, GO coating also reduces water penetration at low and high pressures by approximately 20 % and 60 %, respectively. In addition, scanning electron microscopy analysis shows that GO surface treatment facilitates the hydration process and densifies the concrete microstructure. A simple aqueous suspension of GO is revealed as a tool with a high potential to protect concrete surfaces in a fast and cost-effective way, thanks to the easy application by spraying and the small amount of material needed to obtain great results., This work was supported by the Junta de Castilla y León through the “Ayudas para financiar la contratación predoctoral de personal investigador”, cofinanced by the European Social Fund and resulting in ORDEN EDU/875/2021 and ORDEN EDU/601/2020. José Miguel González-Domínguez and María Fernández-Raga greatly acknowledge the Spanish Ministry of Science and Innovation (MICINN) for the funded project “Nanoshield” (PID2020-120439RA-I00), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Metal-free nanostructured-carbon inks for a sustainable fabrication of zinc/air batteries: From ORR activity to a simple prototype

  • Santos, Florencio
  • Lorca, Sebastián
  • González Martínez, Juan F.
  • Urbina, Antonio
  • Álvarez Sánchez, Miguel Ángel
  • González Domínguez, José Miguel
  • García-Bordejé, José Enrique
  • Ansón-Casaos, Alejandro
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Fernández Romero, Antonio J.
5 figures, 1 table.-- Under a Creative Commons license CC-BY 4.0., Zinc/air batteries are convenient energy storage devices for both small and massive applications. While future perspectives indicate the need for low-cost components and sustainable fabrication processes, the battery performance is in part controlled by the kinetics of the oxygen reduction reaction (ORR), which typically involves transition metals as catalysts. In this context, we prepare a series of metal-free water-based carbon inks, which are tested for their catalytic performance, once deposited on a gas-diffusion substrate, in the air cathode of a simple battery prototype. The inks contain a variety of well-defined carbon nanomaterials and additives, exhibiting different physicochemical properties that critically influence the interaction with the gas diffusion hydrophobic substrate. The intrinsic ORR catalytic activity of the ink material is also analyzed on a glassy carbon electrode by the rotating ring-disc electrode (RRDE) method and specific capacitance measurements. The discharge capacity on our zinc/air battery prototype correlates well with the intrinsic catalytic activity in the RRDE. However, only the activity in the RRDE does not actually assure the performance on the commercial cathode of the prototype, since other chemical compatibility issues play a role. Thus, we highlight the importance of catalyst testing, not only on the RRDE but also under realistic device conditions., This study received financial support from Spanish MICINN under projects PID2019-104272RB-C51, C55AEI/10.13039/501100011033, PID2020-120439-RA-I00, Diputación General de Aragón under project T03_23R (Grupo Reconocido), and Fundación Séneca (Región de Murcia, Spain; Reference: 20985/PI/18). The authors also appreciate the financial support provided by the MICINN and the European Union “NextGenerationEU/PRTR” through the project TED2021–130334B-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Microstructural, durability and colorimetric properties of concrete coated with a controlled application of graphene oxide

  • Antolín Rodríguez, Andrea
  • Merino Maldonado, Daniel
  • Fernández-Raga, María
  • González Domínguez, José Miguel
  • Morán del Pozo, J. Mª.
  • García-González, Julia
  • Juan-Valdés, Andrés
13 figures, 3 tables., The present work analyzes how an aqueous suspension of graphene oxide (GO), as a surface treatment, can influence the properties of conventional concrete. The results show that the application of a GO surface coating on concrete improves its resistance to carbonation and chloride ion penetration, and also increases its electrical resistivity. In the best case, the GO coating can reduce carbonation by 40% and chloride ion diffusion by 75%. An increase of up to 75% in concrete resistivity was also achieved. The application of GO promotes the hydration process and densifies the microstructure of the concrete surface, and this is verified by scanning electron microscopy analysis. In addition, no color modification occurred after application of the treatment., Andrea Antolín-Rodríguez and Daniel Merino-Maldonado would like to thank the Junta de Castilla y León for the support granted through the “Ayudas para financiar la contratación predoctoral de personal investigador”, cofinanced by the European Social Fund and resulting in ORDEN EDU/875/2021 and ORDEN EDU/601/2020. José Miguel González-Domínguez and María Fernández-Raga greatly acknowledge the Spanish Ministry of Science and Innovation (MICINN) for the funded project “Nanoshield” (PID2020-120439RA-I00)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Towards sustainable TiO2 photoelectrodes based on cellulose nanocrystals as a processing adjuvant

  • Martínez-Barón, Carlos
  • Calvo Peña, Víctor
  • Hernández-Ferrer, Javier
  • Villacampa, Belén
  • Ansón-Casaos, Alejandro
  • González Domínguez, José Miguel
  • Maser, Wolfgang K.
  • Benito, Ana M.
8 figures, 2 tables.-- Supplementary information available., Photoelectrodes of TiO2 in the form of films are commonly fabricated using screen printing techniques, employing viscous commercial TiO2 pastes. However, these pastes comprise environmentally unfriendly, multicomponent formulations designed to manufacture the photoactive TiO2 nanoparticles. To strive for sustainable processing and pave the way for the use of liquid-phase film processing technologies, the inherent limited water dispersibility of TiO2 nanoparticles must be overcome. In this study, we show that cellulose nanocrystals, produced via an environmentally benign one-pot hydrolysis process, enable the preparation of stable TiO2 water dispersions. The remarkable stability of these dispersions, evidenced by their outstanding ξ-potential values of −34 mV, facilitates the fabrication of macroporous TiO2 photoactive films throughout spray coating. Employed as photoanodes in a photoelectrochemical cell, our TiO2 photoanodes are compared with conventional TiO2 electrodes obtained from commercial pastes under water splitting conditions. Interestingly, our photoanodes reveal a remarkable three-fold enhancement of the photocurrent performance (132 vs. 46 μA cm−2) and a four-fold increase in the on–off response rate (4 vs. 1 s). These findings underscore the valuable role of cellulose nanocrystals as a green processing asset for achieving TiO2 water dispersions. Moreover, they serve as sacrificial adjuvants for preparing highly macroporous and functional film photoelectrodes, representing a significant step forward in the pursuit of sustainable and efficient materials processing., Sustainability spotlight : Photoelectrochemical processes are essential for many clean energy production methods. For such purpose, the involved electrodes are typically fabricated by means of polluting additives and toxic solvents. Designing efficient electrodes in a sustainable way is of fundamental interest. There is thus a need for non-toxic and green aqueous dispersants, for which nanocellulose shows promising prospects of sustainability and cost-effectiveness. Here we use cellulose nanocrystals in combination with TiO2 nanoparticles, not only to valorise renewable raw materials, but also to conform functional photoanodes in a ground-breaking way. These electrodes are able to undergo photoelectrochemical water splitting, performing more efficiently than a commercial TiO2 benchmark due to the role of nanocellulose, which goes beyond a mere dispersing agent. Our methodology addresses important aspects of responsible consumption and production (UN SDG 12), affordable and clean energy (UN SGD 7), and climate action (UN SDG 13)., Financial support from Spanish MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe” under project grants PID2022-139671OB-I00 and PID2020-120439-RA-I00, as well as by the Gobierno de Aragón (DGA) under projects T03_23R and E47_23R (Grupos de Investigación Reconocidos) is acknowledged. V. C. is thankful for his PhD contract funded by DGA (Ref. CUS/581/2020)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nanocellulose: The ultimate green aqueous dispersant for nanomaterials

  • Calvo Peña, Víctor
  • Martínez-Barón, Carlos
  • Fuentes Varela, Laura
  • Maser, Wolfgang K.
  • Benito, Ana M.
  • González Domínguez, José Miguel
5 figures, 1 table., Nanocellulose, a nanoscale derivative from renewable biomass sources, possesses remarkable colloidal properties in water, mechanical strength, and biocompatibility. It emerges as a promising bio-based dispersing agent for various nanomaterials in water. This mini-review explores the interaction between cellulose nanomaterials (nanocrystals or nanofibers) and water, elucidating how this may enable their potential as an eco-friendly dispersing agent. We explore the potential of nanocellulose derived from top-down processes, nanocrystals, and nanofibers for dispersing carbon nanomaterials, semiconducting oxide nanoparticles, and other nanomaterials in water. We also highlight its advantages over traditional methods by not only effectively dispersing those nanomaterials but also potentially eliminating the need for further chemical treatments or supporting stabilizers. This not only preserves the exceptional properties of nanomaterials in aqueous dispersion, but may even lead to the emergence of novel hybrid functionalities. Overall, this mini-review underscores the remarkable versatility of nanocellulose as a green dispersing agent for a variety of nanomaterials, inspiring further research to expand its potential to other nanomaterials and applications., Financial support from Spanish MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe” under project grants PID2022-139671OB-I00 and PID2020-120439-RA-I00, as well as from Gobierno de Aragón (DGA) under project T03_23R (Grupos de Investigación Reconocidos). V.C. and C.M.-B. thank the DGA for funding their PhD contracts (Ref. CUS/581/2020 and CUS/621/2023)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Carbon nanomaterials-based inks and electrodes using chitin nanocrystals

  • Calvo Peña, Víctor
  • Martínez-Barón, Carlos
  • Vázquez Conejo, Benjamín
  • Domínguez Alfaro, Antonio
  • Paleo, A. J.
  • Villacampa, Belén
  • Ansón-Casaos, Alejandro
  • Maser, Wolfgang K.
  • Benito, Ana M.
  • González Domínguez, José Miguel
5 figures, 2 tables., Dispersing 1D carbon nanomaterials (CNMs) for film processing traditionally relies on surfactants or organic solvents. These methods, however, raise environmental concerns and can negatively impact the final properties of the CNMs. In this work we demonstrate that chitin nanocrystals (ChNCs) synthesized via acid hydrolysis provide a greener pathway for the development of waterborne CNMs-based inks, including single-walled carbon nanotubes, multiwalled carbon nanotubes, and carbon nanofibers. Various concentrations of ChNCs were mixed with each type of CNM to maximize the CNM concentration within the ink. In-depth characterization of the CNM/ChNC inks preceded their processing into supported conductive films by spray-coating. A subsequent thermal treatment of ChNCs at 450 °C leads to the efficient removal of ChNC and results in a significant enhancement of the electrical conductivity. Moreover, freeing the CNMs network structure contributes to increased electrochemical performance of the treated films, as expressed by improved Faradaic charge transfer efficiencies and kinetics reflected by 1 order of magnitude reduced rate constants, when tested with various redox probes. Our findings highlight the potential of ChNCs as a sustainable processing adjuvant of CNMs, leading to electrically conductive electrodes with suitable electrochemical properties for their use in diverse devices and applications., Financial support from Spanish MCINN/AEI/10.13039/501100011033 and “ERDF A way of making Europe” by the European Union under project grants PID2019-104272RB-C51, PID2020-120439RA-I00, and PID2022-139671OB-I00 as well from Spanish CSIC (PIE iniciación ref 202280I007) and from Gobierno de Aragón (DGA, Grupo Reconocido DGA-T03_23R and E47_23R) are acknowledged. V.C. and C.M.-B. thank the DGA for funding their PhD contracts (ref. CUS/581/2020 and CUS/621/2023). A.J.P. gratefully acknowledges support from the FCT-Foundation for Science and Technology by the 2020–2023 Project UIDB/00264/2020. A.D.A. acknowledges UPV/EHU for funding transferred by the European Union-Next Generation EU by the Margarita Salas fellowship (MARSA N° agreement 22/77)., Peer reviewed
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Effect of nanocellulose polymorphism on electrochemical analytical performance in hybrid nanocomposites with non-oxidized single-walled carbon nanotubes

  • Dortez Herranz, Silvia|||0000-0002-1999-5605
  • Sierra Gómez, Tania|||0000-0003-3019-2026
  • Álvarez Sánchez, Miguel A.
  • González Domínguez, José L.
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Crevillen, Agustín G.
  • Escarpa Miguel, Jesús Alberto|||0000-0002-7302-0948
10 p., Two cellulose nanocrystals/single-walled carbon nanotube (CNC/SW) hybrids, using two cellulose polymorphs, were evaluated as electrochemical transducers: CNC type I (CNC-I/SW) and CNC type II (CNC-II/SW). They were synthesized and fully characterized, and their analytical performance as electrochemical sensors was carefully studied. In comparison with SWCNT-based and screen-printed carbon electrodes, CNC/SW sensors showed superior electroanalytical performance in terms of sensitivity and selectivity, not only in the detection of small metabolites (uric acid, dopamine, and tyrosine) but also in the detection of complex glycoproteins (alpha-1-acid glycoprotein (AGP)). More importantly, CNC-II/SW exhibited 20 times higher sensitivity than CNC-I/SW for AGP determination, yielding a LOD of 7 mg L?1.These results demonstrate the critical role played by nanocellulose polymorphism in the electrochemical performance of CNC/SW hybrid materials, opening new directions in the electrochemical sensing of these complex molecules. In general, these high-active-surface hybrids smartly exploited the preserved non-oxidized SW conductivity with the high aqueous dispersibility of the CNC, avoiding the use of organic solvents or the incorporation of toxic surfactants during their processing, making the CNC/SW hybrids promising nanomaterials for electrochemical detection following greener approaches., Comunidad de Madrid; Ministerio de Economía y Competitividad de España; CRUE-CSIC; Gobierno de Aragon, Comunidad de Madrid, Ministerio de Economía y Competitividad, Ministerio de Ciencia e Innovación, Agencia Estatal de Investigación, Gobierno de Aragón
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Metal-free nanostructured-carbon inks for a sustainable fabrication of zinc/air batteries: from ORR activity to a simple prototype

  • Santos, Florencio
  • Lorca, Sebastián
  • González-Martínez, Juan F.
  • Urbina Yeregui, Antonio
  • Álvarez-Sánchez, Miguel A.
  • González-Domínguez, José M.
  • García-Bordejé, Enrique
  • Ansón-Casaos, Alejandro
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Fernández Romero, Antonio J.
Zinc/air batteries are convenient energy storage devices for both small and massive applications. While future perspectives indicate the need for low-cost components and sustainable fabrication processes, the battery performance is in part controlled by the kinetics of the oxygen reduction reaction (ORR), which typically involves transition metals as catalysts. In this context, we prepare a series of metal-free water-based carbon inks, which are tested for their catalytic performance, once deposited on a gas-diffusion substrate, in the air cathode of a simple battery prototype. The inks contain a variety of well-defined carbon nanomaterials and additives, exhibiting different physicochemical properties that critically influence the interaction with the gas diffusion hydrophobic substrate. The intrinsic ORR catalytic activity of the ink material is also analyzed on a glassy carbon electrode by the rotating ring-disc electrode (RRDE) method and specific capacitance measurements. The discharge capacity on our zinc/air battery prototype correlates well with the intrinsic catalytic activity in the RRDE. However, only the activity in the RRDE does not actually assure the performance on the commercial cathode of the prototype, since other chemical compatibility issues play a role. Thus, we highlight the importance of catalyst testing, not only on the RRDE but also under realistic device conditions., Financial support from Spanish MICINN under projects PID2019-104272RB-C51-, C55-AEI/10.13039/501100011033, PID2020-120439-RA-I00, Diputación General de Aragón under project T03_20R (Grupo Reconocido) and Fundación Séneca (Región de Murcia, Spain; Ref: 20985/PI/18). The authors also appreciate the financial support provided by the MICINN and the European Union “NextGenerationEU/PRTR” through the project TED2021-130334B-I00