Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

Docta Complutense
Publication Artículo científico (JournalArticle)

Generation of defective few-layered graphene mesostructures by high-energy ball milling and their combination with FeSiCuNbB microwires for reinforcing microwave absorbing properties

  • López Sánchez, Jesús
  • Peña Moreno, Álvaro
  • Serrano, Aída
  • Del Campo, Adolfo
  • Rodríguez De La Fuente, Óscar
  • Carmona Tejero, Noemí
  • Matatagui Cruz, Daniel
  • Horrillo, María del Carmen
  • Rubio Zazo, Juan
  • Navarro Palma, Elena
  • Marín Palacios, María Pilar
Defective few-layered graphene mesostructures (DFLGMs) are produced from graphite flakes by high-energy milling processes. We obtain an accurate control of the generated mesostructures, as well as of the amount and classification of the structural defects formed, providing a functional material for microwave absorption purposes. Working under far-field conditions, competitive values of minimum reflection loss coefficient (RL_(min)) = −21.76 dB and EAB = 4.77 dB are achieved when DFLGMs are immersed in paints at a low volume fraction (1.95%). One step forward is developed by combining them with the excellent absorption behavior that offers amorphous Fe_(73.5)Si_(13.5)B_(9)Cu_(1)Nb microwires (MWs), varying their filling contents, which are below 3%. We obtain a RLmin improvement of 47% (−53.08 dB) and an EAB enhancement of 137% (4 dB) compared to those obtained by MW-based paints. Furthermore, a f_(min) tunability is demonstrated, maintaining similar RL_(min) and EAB values, irrespective of an ideal matching thickness. In this scenario, the Maxwell-Garnet standard model is valid, and dielectric losses mainly come from multiple reflections, interfacial and dielectric polarizations, which greatly boost the microwave attenuation of MWs. The present concept can remarkably enhance not only the MW attenuation but can also apply to other microwave absorption architectures of technological interest by adding low quantities of DFLGMs.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Tailoring the Lithium Concentration in Thin Lithium Ferrite Films Obtained by Dual Ion Beam Sputtering

  • Prieto Recio, Pilar|||0000-0001-8978-5139
  • Hernández-Gómez, Cayetano
  • Román-Sánchez, Sara
  • París Ogáyar, Marina|||0000-0002-4816-7729
  • Gorni, Giulio
  • Prieto, José Emilio|||0000-0003-2092-6364
  • Serrano, Aida|||0000-0002-6162-0014
Thin films of lithium spinel ferrite, LiFeO, have attracted much scientific attention because of their potential for efficient excitation, the manipulation and propagation of spin currents due to their insulating character, high-saturation magnetization, and Curie temperature, as well as their ultra-low damping value. In addition, LiFeO is currently one of the most interesting materials in terms of developing spintronic devices based on the ionic control of magnetism, for which it is crucial to control the lithium's atomic content. In this work, we demonstrate that dual ion beam sputtering is a suitable technique to tailor the lithium content of thin films of lithium ferrite (LFO) by using the different energies of the assisting ion beam formed by Ar + and O + ions during the growth process. Without assistance, a disordered rock-salt LFO phase (i.e., LiFeO) can be identified as the principal phase. Under beam assistance, highly out-of-plane-oriented (111) thin LFO films have been obtained on (0001) AlO substrates with a disordered spinel structure as the main phase and with lithium concentrations higher and lower than the stoichiometric spinel phase, i.e., LiFeO. After post-annealing of the films at 1025 K, a highly ordered ferromagnetic spinel LFO phase was found when the lithium concentration was higher than the stoichiometric value. With lower lithium contents, the antiferromagnetic hematite (α-FeO) phase emerged and coexisted in films with the ferromagnetic LiFeO. These results open up the possibility of controlling the properties of thin lithium ferrite-based films to enable their use in advanced spintronic devices.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Evaluation of Low-Toxic Hybrid Sol-Gel Coatings with Organic pH-Sensitive Inhibitors for Corrosion Protection of AA2024 Aluminium Alloy

  • Jaldo Serrano, Eva
  • López-Sánchez, Jesús
  • García Galván, Federico
  • Serrano Rubio, Aída
  • Rodríguez de la Fuente, Óscar
  • Barranco, Violeta
  • Galván Sierra, Juan Carlos
  • Carmona, N.
Today’s environmental needs require the reduction of the weight of vehicles, thus reducing fuel consumption and associated emissions. For this reason, the use of light alloys is being studied, which, due to their reactivity, must be protected before use. In this work, the effectiveness of a hybrid sol-gel coating doped with various organic environmentally friendly corrosion inhibitors applied to an AA2024 lightweight aluminium alloy is evaluated. Some of the inhibitors tested are pH indicators, acting as both corrosion inhibitors and optical sensors for the surface of the alloy. Samples are subjected to a corrosion test in a simulated saline environment and characterised before and after the test. The experimental results regarding their best inhibitor performance for their potential application in the transport industry are evaluated., This research was funded by the Spanish Ministry of Science and Innovation (MICINN) for financing the projects RTI2018-095856-B-C21; and by the Spanish Ministry of Economic Affairs and Digital Transformation (MINECO) through the projects PID2020-114192RB-C41, PID2019-104717RB-I00 and PID2021-122980OB-C51. A.S. acknowledges the financial support from MCIN for a “Ramón y Cajal” contract RYC2021-031236-I., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Generation of Defective Few-Layered Graphene Mesostructures by High-Energy Ball Milling and Their Combination with FeSiCuNbB Microwires for Reinforcing Microwave Absorbing Properties

  • López-Sánchez, Jesús
  • Peña, Álvaro
  • Serrano, Aída
  • Del Campo, Adolfo
  • Rodríguez de la Fuente, Óscar
  • Carmona, N.
  • Matatagui, Daniel
  • Horrillo, Carmen
  • Rubio-Zuazo, J.
  • Navarro, Elena
  • Marín, Pilar
15 páginas, 9 figuras, 4 tablas, Defective few-layered graphene mesostructures (DFLGMs) are produced from graphite flakes by high-energy milling processes. We obtain an accurate control of the generated mesostructures, as well as of the amount and classification of the structural defects formed, providing a functional material for microwave absorption purposes. Working under far-field conditions, competitive values of minimum reflection loss coefficient (RLmin) = ¿21.76 dB and EAB = 4.77 dB are achieved when DFLGMs are immersed in paints at a low volume fraction (1.95%). One step forward is developed by combining them with the excellent absorption behavior that offers amorphous Fe73.5Si13.5B9Cu1Nb microwires (MWs), varying their filling contents, which are below 3%. We obtain a RLmin improvement of 47% (¿53.08 dB) and an EAB enhancement of 137% (4 dB) compared to those obtained by MW-based paints. Furthermore, a fmin tunability is demonstrated, maintaining similar RLmin and EAB values, irrespective of an ideal matching thickness. In this scenario, the Maxwell-Garnet standard model is valid, and dielectric losses mainly come from multiple reflections, interfacial and dielectric polarizations, which greatly boost the microwave attenuation of MWs. The present concept can remarkably enhance not only the MW attenuation but can also apply to other microwave absorption architectures of technological interest by adding low quantities of DFLGMs., The present work has been supported by the Ministerio Español de Ciencia e Innovación (MICINN) through the projects: PIE-2010-OE-013-200014, PIE 2021-60-E-030, RTI2018-095856-B-C21, and RTI2018-095303-A-C52; Ministerio de Asuntos Económicos y Transformación Digital (MINECO) by PID2020-114192RB-C41; and Comunidad de Madrid, Spain, by S2018/NMT-4321 NANOMAGCOST. MICINN also supports A.S., D.M., and A.P. through the grants RYC2021-031236-I, RYC2021-031166-I, and PRE2019-0875001234, respectively, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Design and evaluation of multi-core raspberry-like platinum nanoparticles for enhanced photothermal treatment

  • Guénin, Erwann
  • Fromain, Alexandre
  • Serrano Rubio, Aída
  • Gropplero, Giacomo
  • Lalatonne, Yoann
  • Espinosa, Ana
  • Wilhelm, Claire
[EN] While gold-based nanoparticles are now commonly used in nanomedicine due to their stability and high plasmonic resonance, platinum nanoparticles are recently emerging as promising candidates for enhancing radiotherapy sensitivity due to their high atomic number. Here, we demonstrate that platinum-based nanomaterials with a multi-core structure also possess efficient near-infrared photothermal properties, despite platinum’s maximum absorption being primarily in the ultraviolet region. The photothermal efficacy of these platinum multi-core raspberry-like nanoparticles is compared with single-core ultra-small platinum nanoseeds, within glioblastoma cancer spheroids, showcasing the potential of platinum nanocore aggregation for photothermal therapy in cancer treatment. Additionally, we used a microfabrication technique for high-throughput growth of spheroids in microwells to evaluate photothermal treatment on glioblastoma spheroids. Finally, X-ray absorption spectroscopy was conducted to analyze the stability and behavior of both nanoparticles in the cellular environment, indicating their excellent biostability. Moreover, even after laser application, none of the nanoparticles degraded but instead underwent reshaping into a more crystalline structure., This work was supported by the European Union, project ERC-CoG NanoBioMade 865629. The authors thank Christine Péchoux at INRAe for TEM processing and analysis, We also thank the Institut Pierre-Gilles de Gennes (IPGG) with Equipex “Investissements d’avenir” program ANR-10-IDEX-0001-02 PSL and ANR-10-LABX-31-34. Part of these experiments were performed at the CLAESS-BL22 beamline at ALBA Synchrotron (Grant no. 2021025045), we thank the CLAESS beamline staff for the support during the experiments. A.S. acknowledges the financial support from the Spanish Ministry of Science and Innovation (MCIN) for a “Ramón y Cajal” contract RYC2021-031236-I funded by the Recovery, Transformation and Resilience plan. A.E. acknowledges the financial support from Comunidad de Madrid (2018-T1/IND-1005 project, and Spanish MCIN (RYC2020-029282-I and PID2021-127033OB-C21)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Biomineralization of magnetic nanoparticles in stem cells

  • Fromain, Alexandre
  • Walle, Aurore Van de
  • Curé, Guilhem
  • Péchoux, Christine
  • Serrano Rubio, Aída
  • Lalatonne, Yoann
  • Espinosa, Ana
  • Wilhelm, Claire
[EN] Iron is one of the most common metals in the human body, with an intrinsic metabolism including proteins involved in its transport, storage, and redox mechanisms. A less explored singularity is the presence of magnetic iron in the organism, especially in the brain. The capacity of human stem cells to biosynthesize magnetic nanoparticles was recently demonstrated, using iron released by the degradation of synthetic magnetic nanoparticles. To evidence a magnetic biomineralization in mammalian cells, it is required to address the biosynthesis of magnetic nanoparticles in cells supplied exclusively with non-magnetic iron salt precursors. Herein, mouse and human mesenchymal stem cells were incubated with ferric quinate for up to 36 days. By optimizing the concentration and culture time, and by measuring both total intracellular iron content and cellular magnetic signals, the biosynthesis of magnetic nanoparticles was found to occur from 14 days of continuous iron incubation and was correlated with important doses of intracellular iron. The local electronic structure and chemical environment of intracellular iron were further characterized by XAS spectroscopy at the Fe K-edge, showing a total conversion of Fe2+ to Fe3+ when using ferrous salts (ascorbate and sulfate), and a transformation towards ferrihydrite as well as a small proportion of a magnetic phase., This work was supported by the European Union (ERC-2019-CoG project NanoBioMade 865629 and ERC-2022-POC1 project BioMag 101069301) and by ANR (grant ANR-19-CE09-0029). We thank Laure Cordier for the ICP-AES analyses at the Institut de Physique du Globe de Paris platform (IPGP). We thank the BM23 (ESRF, France, granted proposal MA-5112) and CLAESS (ALBA, Spain, granted proposal 2021025045) beamline and their staff for the support during the experiments. A. VdW. acknowledges support from CNRS through the MITI interdisciplinary programs (Métallo-Mix project, BioMAG). A. S. acknowledges the financial support from the Spanish Ministry of Science and Innovation (MICINN) (RYC2021-031236-I) funded by the Recovery, Transformation and Resilience plan. A. E. acknowledges the financial support from Comunidad de Madrid (2018-T1/ IND-1005), Spanish MICINN (RyC2020-029282-I) and MINECO IMDEA Nanociencia project SEV-2016-0686., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Influence of the Substrate on the Exchange Coupling of NiO/FeCo Bilayers

  • Lorenzo-Feijoo, Iker
  • Serrano Rubio, Aída
  • Hernández-Gómez, Cayetano
  • Cuñado, José Luis F.
  • Prieto, Pilar
© 2024 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/)., https://creativecommons.org/licenses/by/4.0/, Antiferromagnetic/ferromagnetic (AF/F) systems have been extensively investigated due to the importance that interfacial exchange coupling effects have in the development of magnetic storage technologies. Recently, these systems have garnered interest for the potential they have to imprint the magnetic moments of the AF into an F layer, offering the possibility of using it as a read-out mechanism in antiferromagnetic spintronics. In this study, we explored the importance of crystalline orientation and strains induced by the substrate in the exchange coupling properties of NiO/FeCo AF/F bilayers. For that, we have grown NiO/FeCo bilayers on MgO (001) and Al2O3 (0001) substrates varying the FeCo layer thickness. In addition, we have analyzed both deposited samples and those with induced interfacial unidirectional anisotropy. For inducing such interfacial anisotropy, we used a field cooling procedure, heating the bilayers to 650 K and subsequently cooling down to room temperature under the presence of an external magnetic field of 300 mT. We have investigated the effect of the substrate in terms of crystalline orientation and lattice mismatching on the AF/F exchange coupling as well as the dependence of the coercivity and exchange bias on the inverse F layer thickness that is consistent with the interfacial origin of the AF/F exchange coupling. Moreover, the angular dependence of the magnetic properties was explored by using vectorial Kerr magnetometry, confirming the presence of both magnetocrystalline anisotropy, arising from the epitaxial character of the growing process mainly when the bilayer is grown on MgO (001) substrates, and the field cooling (FC)-induced unidirectional anisotropy., The work in Madrid was supported by the Spanish Ministry of Science and Innovation (PID2021-124585NBC32, TED2021-130196B-C22) and Consejería de Educación e Investigación de la Comunidad de Madrid (NANOMAGCOST-CM Ref. P2018/NMT-4321) grants. A.S. acknowledges financial support from PID2021-124585NB-C33 funded by MCIN/AEI/10.13039/501100011033, by “ERDF A way of making Europe”, by Project TED2021-130957B-C51 funded by MCIN/AEI/10.13039/501100011033, by the “European Union NextGenerationEU/PRTR” from grant RYC2021-031236-I funded by MCIN/AEI/10.13039/501100011033, and by the “European Union NextGenerationEU/PRTR”. J.L.F.C acknowledges financial support from IMDEA nanociencia as well as from project SOnanoBrain (MINECO, PID2020-116181RB-C31)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Structural Defects on Graphene Generated by Deposition of CoO: Effect of Electronic Coupling of Graphene

  • Hernández-Gómez, Cayetano
  • Prieto, Pilar
  • Morales, Carlos
  • Serrano Rubio, Aída
  • Flege, Jan Ingo
  • Méndez, Javier
  • García-Pérez, Julia
  • Granados, Daniel
  • Soriano, Leonardo
Understanding the interactions in hybrid systems based on graphene and functional oxides is crucial to the applicability of graphene in real devices. Here, we present a study of the structural defects occurring on graphene during the early stages of the growth of CoO, tailored by the electronic coupling between graphene and the substrate in which it is supported: as received pristine graphene on polycrystalline copper (coupled), cleaned in ultra-high vacuum conditions to remove oxygen contamination, and graphene transferred to SiO2/Si substrates (decoupled). The CoO growth was performed at room temperature by thermal evaporation of metallic Co under a molecular oxygen atmosphere, and the early stages of the growth were investigated. On the decoupled G/SiO2/Si samples, with an initial low crystalline quality of graphene, the formation of a CoO wetting layer is observed, identifying the Stranski-Krastanov growth mode. In contrast, on coupled G/Cu samples, the Volmer-Weber growth mechanism is observed. In both sets of samples, the oxidation of graphene is low during the early stages of growth, increasing for the larger coverages. Furthermore, structural defects are developed in the graphene lattice on both substrates during the growth of CoO, which is significantly higher on decoupled G/SiO2/Si samples mainly for higher CoO coverages. When approaching the full coverage on both substrates, the CoO islands coalesce to form a continuous CoO layer with strip-like structures with diameters ranging between 70 and 150 nm., The work was supported by the Spanish Ministry of Science and Innovation by the projects PID2021-124585NBC32, PID2021-124585NB-C33, and PID2020-113142RB-C21) funded by MCIN/AEI/10.13039/501100011033 and by the projects TED2021-130196B-C22 and TED2021-130957B-C51 funded by the MCIN/AEI/10.13039/501100011033 and by the “European Union NextGeneration EU/PRTR“. The work was also supported by the Consejería de Educación e Investigación de la Comunidad de Madrid (NANOMAGCOST-CM Ref. P2018/NMT-4321) grant. A.S. acknowledges the financial support of the grant RYC2021-031236-I funded by MCIN/AEI/ 10.13039/501100011033 and by “European Union NextGenerationEU/PRT. C. Morales thanks the Postdoc Network Brandenburg for a PNB individual grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Promoting the circularity of ceramic materials through cold sintering of aggregates from construction and demolition waste

  • Marín Cortés, Sonia
  • Biesuz, Mattia
  • Serrano, Aida
  • De Bona, Emanuele
  • Enríquez Pérez, Esther
  • Fernández Lozano, José Francisco
  • Sglavo, Vincenzo M.
10 pags., 6 figs., A ceramic composition containing 95 wt% of construction and demolition waste-like material was consolidated by cold sintering process at 200 °C using KOH water solutions as the liquid medium. The relative density of the samples reaches ∼90 % of the theoretical one for process conditions of 600 MPa and 60 min. A post-annealing process at 1100 °C of the as-cold sintered samples causes a slight increase in the relative density and of their mechanical strength compared with conventionally sintered samples at 1100 °C and increases the shape factor of the Weibull distribution, thus increasing the reliability of the component. It is shown that cold sintering of the material avoids its high pyroplasticity, providing low shrinkage and reducing internal defects in the ceramic. This work represents the first exploration of the viability of manufacturing ceramic tiles with high recycled content contributing to the transition to a greener world., The authors gratefully acknowledge the financial support of the European Union's Horizon 2020 research and innovation programs ICEBERG (No. 869336) for their financial support. This work was supported by the project PID2020-114192RB-C41 funded by MCIN/AEI/10.13039/501100011033 and by ‘‘ERDF A way of making Europe’‘. The authors are grateful to the JECS Trust for funding the visit of S. M-C. to the Department of Industrial Engineering, University of Trento, Italy (Contract No. 2022336). A.S. acknowledges financial support from PID2021-124585NB-C33 funded by MCIN/AEI/10.13039/501100011033 and by ‘‘ERDF A way of making Europe’‘, by Project TED2021-130957B-C51 funded by MCIN/AEI/10.13039/501100011033 and by the ‘‘European Union NextGenerationEU/PRTR’’ and from grant RYC2021-031236-I funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Dense ceramics by cold reaction sintering using 95 % powdered construction and demolition waste and sodium silicate

  • Marín Cortés, Sonia
  • Serrano, Aida
  • Enríquez Pérez, Esther
  • Fernández Lozano, José Francisco
10 pags. 7 figs., 2 tabs., This work explores the feasibility of producing ceramic-like materials from recycled construction and demolition waste through cold reaction sintering using sodium silicate as the liquid medium. The recycled material consists of a mixture of ceramics, mortar, and/or plasterboard - common building materials. Samples containing 95 wt% of recycled content were successfully fabricated at 150 ºC, a considerably lower temperature compared to conventional ceramic processes. These samples exhibited dense microstructures with relative densities of ∼ 90 %, as well as promising mechanical properties, including Vickers hardness values comparable to conventional bricks. In particular, samples with 30 % non-ceramic material showed more than twice the hardness when mortar was incorporated. Leaching tests confirmed the chemical stability of the material, with the incorporation of Ca²⁺ ions into non-leachable species, suggesting a reaction during CRS that enhances its durability. Additionally, FTIR analysis showed a blueshift in the signature from 973 cm⁻¹ to 1041 cm⁻¹ under more aggressive conditions, indicating structural changes and improved leachability. The primary advantage of this process would lie in the high recycled content used to create materials. This proposed new method allows obtaining dense pieces at very low temperatures, which also supposes a reduction of energy consumption, and therefore, an improvement of the sustainability of the production process. Given that this construction and demolition waste are often limited to not high added values, this approach not only supports environmental sustainability and resource conservation but also offers a viable pathway to decarbonizing the ceramic industry., The authors gratefully acknowledge the financial support of the European Union’s Horizon 2020 research and innovation programs ICEBERG (No. 869336) for their financial support. This work was supported by the Spanish Ministry for Science and Innovation (MCIN) under the project PID2020–114192RB-C41 and PID2021–124585NB-C33 funded by MCIN/AEI/10.13039/501100011033 and by ‘‘ERDF A way of making Europe’’ and by Project T130957B-C51ED2021– funded by MCIN/AEI/10.13039/501100011033 and by the ‘‘European Union NextGenerationEU/PRTR’’. A.S. acknowledges financial support from grant RYC2021–031236-I funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Comprehensive characterization and structural modelling of lithium ferrites

  • Granados-Miralles, Cecilia
  • Marco, J.F.
  • Serrano Rubio, Aída
  • Gorni, Giulio
  • López-Sánchez, Jesús
  • Castellano-Soria, Alberto
  • Navarro, Elena
  • Marín, Pilar
  • Rubio-Zuazo, J.
  • Fernández Lozano, José Francisco
  • Quesada, Adrián
13 pages, 8 figures, 2 tables, The character and magnitude of the properties of lithium ferrites depend on the specific polymorph stabilized. Reliable polymorph identification and quantitative analysis have been realized by complementary structural characterization techniques (synchrotron X-ray diffraction, 57Fe M¨ossbauer and X-ray absorption spectroscopies), through fitting/modelling of the experimental datasets to appropriate mathematical models. Calculated sample compositions show a maximum offset of 7 wt% between techniques, and cation distribution on the spinel-like LiFe5O8 material has yielded values ranging from 60 to 67 at% Fe3+ in octahedral sites with respect to the total number of Fe3+cations in the spinel phase. Magnetic transition temperatures (i.e., N´eel/Curie) in the order of 91–93 K and 893–898 K have been measured for LiFeO2 and LiFe5O8, respectively. The combined characterization presented here is brought forward as a reliable method to establish the relative concentrations of polymorphs in ferrites, a strategy which can be expanded to other families of Fe-based materials., This work has been supported by grants PID2021–124585NB-C31, PID2021–124585NB-C33, and PID2023–151036OA-I00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF, EU, grants TED2021–130957B-C51, CNS2022–135876, RYC2021–031181-I, and RYC2021–031236-I funded by MICIU/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR, and grants RYC- 2017–23320, and RYC2022–035912-I funded by MICIU/AEI/10.13039/ 501100011033 and by “ESF Investing in your future”. XAS experiments were performed at the BL22-CLÆSS beamline at ALBA Synchrotron with the collaboration of ALBA staff (experiment n. 2022025654). The MICIU, and CSIC are acknowledged for provision of synchrotron radiation facilities at BM25-SpLine and for financial support through the projects PE-2010 6 0E 013 and PE-2021 60 E 030. The authors sincerely acknowledge the ESRF (France), the MCINN, and the Consejo Superior de Investigaciones Científicas (CSIC, Spain) for their financial and technical support under proposal number A25–02–1009, as well as the BM25-SpLine staff for their assistance in the use of the synchrotron radiation facilities., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

In-Operando local structural response of Si-based press-fit PN-junction diodes

  • Román, Sara
  • Moure Arroyo, Alberto
  • López-Sánchez, Jesús
  • Rubio-Zuazo, J.
  • Campo, Ángel Adolfo del
  • Oujja, Mohamed
  • Calvo, Rodrigo
  • Sánchez-Prieto, Jesús
  • Lorite, Israel
  • Fernández Lozano, José Francisco
  • Serrano Rubio, Aída
[Data Statement] Data will be made available on request., Understanding the local structural evolution of silicon-based press-fit diodes under real operating conditions is critical for the development of reliable power electronic components. During operation, these diodes are exposed to high electric currents, leading to significant overheating and the generation of interfacial stresses caused by mismatches in the thermal expansion coefficients of the constituent materials in the device. These effects are further influenced by the doping profiles of the semiconductor junctions. In this study, we examine the structural response of single-crystal silicon in commercial press-fit power diodes both under room conditions (room temperature and no applied current) as well as under real current-driven operating conditions, focusing on localized regions defined by the doping profiles of three different PN-junction-based devices. The presence of dopants, along with the current-induced strain and thermal effects in the silicon lattice, leads to structural changes that directly impact device performance. By employing advanced in-operando characterization techniques, we resolve, for the first time, localized interfacial and region-dependent structural phenomena within operating press-fit diodes and establish direct correlations between lattice distortions, interfacial behavior, and doping concentration. These results provide new insights into the microscopic mechanisms governing reliability and degradation in high-power silicon devices under realistic working conditions., This work was supported by the Consejo Superior de Investigaciones Científicas (CSIC) under project AFICHES (No. 202460E101). S.R.-S. acknowledges the financial support from the FARDIO project to SEG Automotive Germany GmbH. J.L.-S. acknowledges the financial support from grant PID2023-151036OA-I00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF, EU, and from grant RYC2022-035912-I funded by MCIU/AEI/10.13039/501100011033 and by the European Social Fund Plus (ESF +). A.S. acknowledges the financial support from Spanish Ministry for Science and Innovation (MCIN) for a Ramón y Cajal contract (No. RYC2021-031236-I) funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR” and the project PID2021-124585NB-C33 funded by MCIN/AEI/10.13039/501100011033 and by ‘‘ERDF A way of making Europe’’. The authors acknowledge the support from the ‘Centro de Microanalisis de Materiales (CMAM)—Universidad Autonoma de Madrid’, for the beam time proposals with codes IMP019/22 and IMP013/23; and its technical staff for their contribution to the operation of the accelerator. We thank Gastón García and José Olivares for helpful discussions and reading of the manuscript. The authors also acknowledge the European Synchrotron Radiation Facility (ESRF), the MCIN and the CSIC for provision of synchrotron radiation facilities under proposal numbers A25-02-940, A25-02-997, A25-02-1030, MA-5391 and A25-02-1074, as well as for the funding through the projects PIE-2010-6-0E-013 and PIE-2021-60-E-030. We would like to thank technical staff for their assistance and support in using beamline BM25-SpLine., Peer reviewed
Docta Complutense
Publication Artículo científico (JournalArticle)

Evaluation of low-toxic hybrid sol-gel coatings with organic pH-sensitive inhibitors for corrosion protection of AA2024 aluminium alloy

  • Jaldo Serrano, Eva
  • López Sánchez, Jesús
  • García Galván, Federico
  • Serrano, Aída
  • Rodríguez De La Fuente, Óscar
  • Barranco, Violeta
  • Galván, Juan Carlos
  • Carmona Tejero, Noemí
Today’s environmental needs require the reduction of the weight of vehicles, thus reducing fuel consumption and associated emissions. For this reason, the use of light alloys is being studied, which, due to their reactivity, must be protected before use. In this work, the effectiveness of a hybrid sol-gel coating doped with various organic environmentally friendly corrosion inhibitors applied to an AA2024 lightweight aluminium alloy is evaluated. Some of the inhibitors tested are pH indicators, acting as both corrosion inhibitors and optical sensors for the surface of the alloy. Samples are subjected to a corrosion test in a simulated saline environment and characterised before and after the test. The experimental results regarding their best inhibitor performance for their potential application in the transport industry are evaluated.