Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Capacitive and charge transfer effects of single‐walled carbon nanotubes in TiO2 electrodes

  • Ansón-Casaos, Alejandro
  • Rubio-Muñoz, Cristina
  • Hernández-Ferrer, Javier
  • Santidrián, Ana
  • Benito, Ana M.
  • Maser, Wolfgang K.
6 Figuras.- 1 Suplemento.- Título del pre-print: "Metallic and semiconducting carbon nanotube features observed in a hybrid titanium dioxide electrode".- This is the pre-peer reviewed version of the following article: ChemPhysChem 20: 838-847 (2019), which has been published in final form at DOI:10.1002/cphc.201900066. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions., The transfer of nanoscale properties from single‐walled carbon nanotubes (SWCNTs) to macroscopic systems is a topic of intense research. In particular, inorganic composites of SWCNTs and metal oxide semiconductors are being investigated for applications in electronics, energy devices, photocatalysis, and electroanalysis. In this work, a commercial SWCNT material is separated into fractions containing different conformations. The liquid fractions show clear variations in their optical absorbance spectra, indicating differences in the metallic/semiconducting character and the diameter of the SWCNTs. Also, changes in the surface chemistry and the electrical resistance are evidenced in SWCNT solid films. The starting SWCNT sample and the fractions as well are used to prepare hybrid electrodes with titanium dioxide (SWCNT/TiO2). Raman spectroscopy reflects the optoelectronic properties of SWCNTs in the SWCNT/TiO2 electrodes, while the electrochemical behavior is studied by cyclic voltammetry. A selective development of charge transfer characteristics and double‐layer behavior is achieved through the suitable choice of SWCNT fractions., This work has been funded by the Spanish Ministry of Science and the European Regional Development Fund (ENE 2016‐79282‐C5‐1‐R), the Government of Aragon (T03‐17R), and the European Commission (H2020‐MSCA‐ITN‐2014‐ETN 642742 “Enabling Excellence”)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

In-situ growth and immobilization of CdS nanoparticles onto functionalized MoS2: preparation, characterization and fabrication of photoelectrochemical cells

  • Kagkoura, Antonia
  • Hernández-Ferrer, Javier
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Tagmatarchis, Nikos
2 Esquemas, 5 Figuras.-- This is the pre-peer reviewed version of the following article: "In-situ growth and immobilization of CdS nanoparticles onto functionalized MoS2: preparation, characterization and fabrication of photoelectrochemical cell", Chemistry - an Asian Journal: 2019, which has been published in final form at https://doi.org/10.1002/asia.201901371. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions"., A facile strategy for the controllable growth of CdS nanoparticles at the periphery of MoS 2 en route the preparation of electron donor‐acceptor nanoensembles is developed. Precisely, the carboxylic group of α‐lipoic acid, as addend of the modified MoS 2 obtained upon 1,2‐dithiolane functionalization, was employed as anchor site for the in‐situ preparation and immobilization of the CdS nanoparticles in an one‐pot two‐step process. The newly prepared MoS 2 /CdS hybrid material was characterized by complementary spectroscopic, thermal and microscopy imaging means. Absorption spectroscopy was employed to register the formation of MoS 2 /CdS, by observing a broad shoulder centered at 420 nm due to CdS nanoparticles, while the excitonic bands of MoS 2 were also evident. Moreover, based on the efficient quenching of the characteristic fluorescence emission of CdS at 725 nm by the presence of MoS 2 , strong electronic interactions at the excited state between the two species within the ensemble were identified. Photoelectrochemical assays of MoS 2 /CdS thin‐film electrodes revealed a prompt, steady and reproducible anodic photoresponse during repeated on‐off cycles of illumination. A significant zero‐current photopotential of ‐540 mV and an anodic photocurrent of 1 μA were observed, underlining improved charge‐separation and electron transport from CdS to MoS 2 . The superior performance of the charge‐transfer processes in MoS 2 /CdS is of direct interest for the fabrication of photoelectrochemical and optoelectronic devices., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 642742. Support of this work by the project “Advanced Materials and Devices” (MIS 5002409) which is implemented under the “Action for the Strategic Development on the Research and Technological Sector”, which Submitted_Manuscript is implemented under the “Reinforcement of the Research and Innovation Infrastructures”, funded by the Operational Program "Competitiveness, Entrepreneurship and Innovation" (NSRF 2014-2020) and co-financed by Greece and the European Union (European Regional Development Fund) is also acknowledged. A.M.B. and W.K.M. acknowledge Spanish MINEICO (project grant ENE2016-79282-C5-1-R, AEI/FEDER, UE) and the Gobierno de Aragón (Grupo Reconocido DGA T03_17R, FEDER, UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Bottom-up synthesized MoS 2 interfacing polymer carbon nanodots with electrocatalytic activity for hydrogen evolution

  • Kagkoura, Antonia
  • Canton-Vitoria, Rubén
  • Vallan, Lorenzo
  • Hernández-Ferrer, Javier
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Arenal, Raúl
  • Tagmatarchis, Nikos
5 Figuras, 1 Esquema, 1 Tabla .-- Información suplementaria disponible en la página web del editor., The preparation of MoS 2 ‐polymer carbon nanodot (MoS 2 ‐PCND) hybrid material was accomplished by employing an easy and fast bottom‐up synthetic approach. Specifically, MoS 2 ‐PCND was realized by the thermal decomposition of ammonium tetrathiomolybdate and the in‐situ complexation of Mo with carboxylic acid units present in the surface of PCNDs. The newly prepared hybrid material was comprehensively characterized by spectroscopic, thermal and electron microscopy imaging means. The electrocatalytic activity of MoS 2 ‐PCND was examined against the hydrogen evolution reaction (HER) and compared with that attributed to the hybrid material prepared by a top‐down approach, namely with MoS 2 ‐PCND(exf‐fun), in which MoS 2 was firstly exfoliated and then covalently functionalized with PCNDs. The MoS 2 ‐PCND hybrid material showed superior electrocatalytic activity against HER with low Tafel slope value and excellent electrocatalytic stability, with an onset potential at ‐0.16 V vs RHE. The superior catalytic performance of MoS 2 ‐PCND was rationalized by considering the catalytic active sites of MoS 2 , the effective charge/energy‐transfer phenomena from PCNDs to MoS 2 and the synergetic effect between MoS 2 and PCNDs within the hybrid material., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 642742. Support of this work by the project “Advanced Materials and Devices” (MIS 5002409) which is implemented under the “Action for the Strategic Development on the Research and Technological Sector”, which is implemented under the “Reinforcement of the Research and Innovation Infrastructures”, funded by the Operational Program "Competitiveness, Entrepreneurship and Innovation" (NSRF 2014-2020) and co-financed by Ministry of Development and Investments, Greece, and the European Union (European Regional Development Fund) is also acknowledged. A.M.B. and W.K.M. acknowledge Spanish MINEICO (project grant ENE2016-79282-C5-1-R, AEI/FEDER, UE) and the Gobierno de Aragón (Grupo Reconocido DGA T03_17R, FEDER, UE). The SR-EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. The SR-EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. R.A. gratefully acknowledges the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project grant MAT2016-79776-P (AEI/FEDER, UE) from the Government of Aragon and the European Social Fund under the project “Construyendo Europa desde Aragon” 2014-2020 (grant number E13_17R) and from the European Union H2020 programs “ESTEEM3” (823717) and under the “Graphene Flagship” CORE2 project grant agreement No 785219., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

One-pot preparation of iron/alumina catalyst for the efficient growth of vertically-aligned carbon nanotube forests

  • Roussey, Arthur
  • Venier, Nicolas
  • Fneich, Hussein
  • Giardella, Lucas
  • Pinaud, Thomas
  • Tahir, Saïd
  • Peláez-Fernández, Mario
  • Arenal, Raúl
  • Mehdi, Ahmad
  • Jourdain, Vincent
The catalytic growth of vertically-aligned carbon nanotubes (VA-CNTs) forest usually requires thin catalyst films deposited by multi-step and costly physical vapor deposition techniques. Here, we demonstrate that an efficient catalyst and its supporting layer for VACNT growth can be prepared by using a simple solution of Fe(NO3)3 and Al(NO3)3 deposited on silica in a single step. This process being much simpler and cheaper than existing preparation methods, it can easily be transferred to industry for the low-cost, thin and large-area coating of catalyst for VA-CNT growth. Our study shows that aluminum hydroxides preferentially react with the SiO2 surface while iron hydroxides tend to form oxide or hydroxide nanoparticles, thus allowing preparation of an aluminum-based buffer layer with iron-based nanoparticles at its surface. Optimization of the Fe/Al ratio and salt concentrations yielded catalysts with performances similar to standard Fe/Al2O3 catalysts prepared by physical vapor deposition., The Government of Aragon, and the European Social Fund are gratefully acknowledged. R.A. gratefully acknowledges the project “Construyendo Europa desde Aragon” 2014-2020 (grant number E/26). R.A. gratefully acknowledges the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project grant MAT2016-79776-P (AEI/FEDER, UE). Part of this work has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No 642742., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Radial collapse of carbon nanotubes for conductivity optimized polymer composites

  • Balima, Félix
  • Arenal, Raúl
  • San Miguel, Alfonso
F. Balima et al., The optimization of the electronic conduction of carbon nanotube polymer composites is studied by tuning the radial geometry of the carbon nanotubes in a compression cycle. We have investigated the structural evolution of multi-walled carbon nanotubes in a polyamide matrix as a function of applied high pressure. Combining high resolution electron microscopy and small angle neutron scattering experiments, we conclude that the nanotube radial cross-section is irreversibly deformed following applied pressures up to 5 GPa. Studying highly percolated composites we observe that the sample resistivity drastically decreases with pressure up to about 2 GPa with no further change up to the maximum 5 GPa applied pressure. An important hysteresis is observed upon decompression which leads to an enhanced electrical conductivity of the composite in all the studied compression cycles with maximum pressures ranging from 1 to 5 GPa. Modelling the radial collapse of single-walled carbon nanotubes shows that the modified radial geometry can considerably improve the electronic transport properties in contacted carbon nanotube junctions. Our results open opportunities for engineering nanotube composites by controlling the radial collapse., We acknowledge financial support by the ANR program P2N under Contract ANR-11-NANO-025 “TRI-CO”. We are indebted to the Arkema company for providing samples and associated information. We acknowledge technical support of F. Legrand (ILM, Lyon). The transmission electron microscopy studies were conducted at the Laboratorio de Microscopias Avanzadas (LMA) at the Instituto de Nanociencia de Aragon (INA) - Universidad de Zaragoza (Spain). R.A. acknowledges funding from the Spanish Ministerio de Economia y Competitividad (FIS2013-46159-C3-3-P). The research leading to these TEM results has received funding from the from the European Union Seventh Framework Program under Grant Agreement 604391 Graphene Flagship, as well as from EU H2020 ETN project “Enabling Excellence” Grant Agreement 642742., Peer reviewed