Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Synthesizing new materials for thermal energy storage

  • Nahad, Mahya Nikoo
Why do we need to store thermal energy? Storing thermal energy is essential because it helps mitigate climate change, reduce energy costs, and preserve resources for future generations. What is the objective of developing new materials for thermal energy storage? The goal is to create efficient and sustainable materials that can store and release heat effectively. Phase Change Materials (PCMs) are an example of such materials, as they store heat when they melt and release it when they solidify., This study has received funding from the European Union’s Horizon Europe research and innovation programme under Grant Agreement No. 101084182 (HYBRIDplus). The views and opinions expressed are, however, those of the author(s) only and do not necessarily reflect those of the European Union or AINEA. Neither the European Union nor the granting authority can be held responsible for them. This work was partially funded by the Ministerio de Ciencia e Innovación – Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31 – MCIN/AEI/10.13039/501100011033/FEDER, EU). It was also funded by the Ministerio de Ciencia e Innovación – Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31 – MCIN/AEI/10.13039/501100011033/FEDER, EU) and by the Ministerio de Ciencia e Innovación y Universidades – Agencia Estatal de Investigación (AEI) (RED2024-153629-T). In addition, this work was partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Departament de Recerca i Universitats of the Government of Catalonia for the quality accreditation granted to their research group (2021 SGR 01615). GREiA is a certified TECNIO agent in the category of technology developers by the Government of Catalonia. This project is also co-funded by the European Union’s Horizon Europe research and innovation programme under the project NitRecercat2425 (101162003).
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Evaluación comparativa de las tecnologías de almacenamiento de energía térmica (TES) integradas a sistemas de generación termosolar (CSP)

  • Tagle-Salazar, Pablo D.
El almacenamiento de energía térmica (TES) capta el calor extra de los periodos soleados y lo libera cuando el recurso solar es insuficiente para generar electricidad. Así, se garantiza un suministro de energía constante y fiable. En las centrales termosolares (CSP), el TES mantiene la producción de electricidad, incluso después del ocaso. Objetivos: 1. Comparar sistemas de almacenamiento usando sales fundidas, hormigón y materiales de cambio de fase (PCM) como medios de almacenamiento integrados a centrales CSP en las mismas condiciones para descubrir sus puntos fuertes y sus limitaciones. 2. Desarrollar una herramienta hecha a medida que modele cómo se comporta cada sistema de almacenamiento a lo largo del tiempo e interactúa con otras partes de la planta, lo que permite un análisis realista del rendimiento., Este proyecto ha sido financiado por el programa de investigación e innovación Horizonte Europa de la Unión Europea mediante el acuerdo de subvención 101084182 (HYBRJ Plus). No obstante, las opiniones y puntos de vista expresados son exclusivamente los de los autores y no reflejan necesariamente los de la Unión Europea ni los de CINEA. Ni la Unión Europea ni la autoridad que concede la subvención pueden ser consideradas responsables de los mismos. Este trabajo está parcialmente financiado por el Ministerio de Ciencia, Innovación y Universidades – Agencia Estatal de Investigación (AEI) (REF: 2024-153629-I) y por el Ministerio de Ciencia e Innovación – Agencia Estatal de Investigación (AEI) (PID2021-123511OB-I00 – MCIN/AEI/10.13039/501100011033/FEDER, UE). Asimismo, ha sido financiado por el Ministerio de Ciencia e Innovación de España (MCIN/AEI/10.13039/501100011033) y por la Unión Europea a través de NextGenerationEU/PRTR (Grant Agreement TED2021-132216A-I00). Este trabajo está parcialmente apoyado por ICREA dentro del programa ICREA Academia. Los autores agradecen al Departament de Recerca i Universitats de la Generalitat de Catalunya la acreditación de calidad concedida a su grupo de investigación (2021 SGR 01615). GREiA es un agente certificado TECNIO en la categoría de desarrolladores tecnológicos de la Generalitat de Catalunya. Este proyecto está cofinanciado por el programa de investigación e innovación de la Unión Europea Horizonte Europa, dentro del proyecto NitRecercat2425 (GA 101162003).
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Performance enhancement of a PCM-based cascaded thermal energy storage system through integration of an electrically charged stage

  • López-Román, Antón
  • Tagle-Salazar, Pablo D.
  • Cabeza, Luisa F.
  • Prieto, Cristina
This research offers an in-depth benchmark analysis that evaluates two cascaded thermal energy storage (TES) systems utilising phase change materials (PCMs) as the storage medium. A conventional four-stage thermal-only cascaded system was assessed against an alternative configuration that incorporated an electrically-charged (EC) and thermally-discharged high-temperature stage. The findings demonstrate that the incorporation of an EC stage substantially increased the total energy discharged, nearly doubling it, and accounting for a 64.83% increase in the discharging process duration, with a volume increase of 20.14%. Furthermore, the discharge of the thermal stages was improved by up to 56.66% compared to its non-electrified counterpart. These findings offer valuable insights into the design and implementation of advanced high-temperature TES systems for future low-carbon energy systems., This project was funded by the European Union’s Horizon Europe Research and Innovation Programme under grant agreement 101084182 (HYBRIDplus). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This work is partially supported by ICREA under the ICREA Academia programme. The authors at the University of Lleida would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Experimental study of cascade finned shell and tube TES tanks with organic phase change materials

  • Megra, Kassahun Tadesse
  • Mani Kala, Saranprabhu
  • Peccolo, Simone
  • Zsembinszki, Gabriel
  • Borri, Emiliano
  • Prieto, Cristina
  • Cabeza, Luisa F.
Latent heat thermal energy storage (TES) systems using phase change materials (PCMs) are promising for mitigating renewable energy intermittency and improving waste heat recovery, due to their high energy density and near-constant operating temperature. To increase energy storage capacity, PCMs can operate beyond their melting point, but this induces thermal stress. Cascade TES systems overcome these issues by using multiple PCMs with different melting points and enable multilevel energy utilisation. A custom-built experimental setup is used to investigate the charging and discharging characteristics of a three-stage cascade TES system using organic PCMs in finned shell and tube TES tanks. The results show that cascade systems can be effectively integrated over a wide temperature range, storing a higher energy than single stage systems., This project was funded by the European Union Horizon Europe Research and Innovation Programme under grant agreement 101084182 (HYBRIDplus). Views and opinions expressed are, however, those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This paper is part of the RYC2023-044196-I, funded by Ministerio de Ciencia e Innovación y Universidades - Agencia Estatal de Investigación MICIU/AEI/10.13039/501100011033 and FSE+. This work is also Funded by Ministerio de Ciencia e Innovación y Universidades - Agencia Estatal de Investigación (MICIU/AEI /10.13039/501100011033) (RED2024-153629-T). The authors also thank the Generalitat de Catalunya for the quality accreditation granted to their research group (2021 SGR 01615). GREiA is a certified agent TECNIO in the category of technology developers of the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Heat transfer enhancement of thermal energy storage systems using phase change materials: experimental work

  • Megra, Kassahun Tadesse
Growing energy demand and environmental concerns are accelerating the shift to renewable sources. Solar and other renewables need efficient storage due to their intermittent nature. TES systems using phase change materials (PCMs) are promising for storing heat at constant temperatures. This research enhances TES performance by optimizing heat transfer and evaluating PCMs under real conditions. The results aim to support efficient and sustainable integration of renewable energy., This project was funded by the European Union’s Horizon Europe Research and Innovation Programme under grant agreement HYBRIDplus (101084182) and SUNSHINE (101103552). Views and opinions expressed are, however, those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This paper is part of the RYC2023-044196, funded by MCIN/AEI/10.13039/501100011033 and FSE+, and Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31 – MCIN/AEI/10.13039/501100011033/FEDER, UE). This work is also partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is a certified TECNIO agent in the category of technology developers of the Government of Catalonia. This project is also co-funded by the European Union’s research and innovation programme Horizon Europe under the project NitRecercat2425 (GA 101162003).
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Performance enhancement of a PCM-based cascaded thermal energy storage system through integration of an electrically charged stage

  • López-Román, Antón
  • Tagle-Salazar, Pablo D.
  • Cabeza, Luisa F.
  • Prieto, Cristina
This research offers an in-depth benchmark analysis that evaluates two cascaded thermal energy storage (TES) systems utilising phase change materials (PCMs) as the storage medium. A conventional four-stage thermal-only cascaded system was assessed against an alternative configuration that incorporated an electrically-charged (EC) and thermally-discharged high-temperature stage. The findings demonstrate that the incorporation of an EC stage substantially increased the total energy discharged, nearly doubling it, and accounting for a 64.83% increase in the discharging process duration, with a volume increase of 20.14%. Furthermore, the discharge of the thermal stages was improved by up to 56.66% compared to its non-electrified counterpart. These findings offer valuable insights into the design and implementation of advanced high-temperature TES systems for future low-carbon energy systems., This project was funded by the European Union’s Horizon Europe Research and Innovation Programme under grant agreement 101084182 (HYBRIDplus). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This work is partially supported by ICREA under the ICREA Academia programme. The authors at the University of Lleida would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Experimental study of cascade finned shell and tube TES tanks with organic phase change materials

  • Megra, Kassahun Tadesse
  • Mani Kala, Saranprabhu
  • Peccolo, Simone
  • Zsembinszki, Gabriel
  • Borri, Emiliano
  • Prieto, Cristina
  • Cabeza, Luisa F.
Latent heat thermal energy storage (TES) systems using phase change materials (PCMs) are promising for mitigating renewable energy intermittency and improving waste heat recovery, due to their high energy density and near-constant operating temperature. To increase energy storage capacity, PCMs can operate beyond their melting point, but this induces thermal stress. Cascade TES systems overcome these issues by using multiple PCMs with different melting points and enable multilevel energy utilisation. A custom-built experimental setup is used to investigate the charging and discharging characteristics of a three-stage cascade TES system using organic PCMs in finned shell and tube TES tanks. The results show that cascade systems can be effectively integrated over a wide temperature range, storing a higher energy than single stage systems., This project was funded by the European Union Horizon Europe Research and Innovation Programme under grant agreement 101084182 (HYBRIDplus). Views and opinions expressed are, however, those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This paper is part of the RYC2023-044196-I, funded by Ministerio de Ciencia e Innovación y Universidades - Agencia Estatal de Investigación MICIU/AEI/10.13039/501100011033 and FSE+. This work is also Funded by Ministerio de Ciencia e Innovación y Universidades - Agencia Estatal de Investigación (MICIU/AEI /10.13039/501100011033) (RED2024-153629-T). The authors also thank the Generalitat de Catalunya for the quality accreditation granted to their research group (2021 SGR 01615). GREiA is a certified agent TECNIO in the category of technology developers of the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.