L’ús dels materials de canvi de fase (PCM) com medi per l’emmagatzematge d’energia tèrmica (TES) consagren aquesta tecnologia com una solució eficient i fiable per la gestió de l’energia tèrmica. Aquest requisit és molt important en moltes aplicacions on la demanda energètica i el consum energètic no coincideixen en el temps. Però, molts PCM presenten una baixa conductivitat tèrmica, fet que dificulta la propagació de la calor cap a les zones més llunyades
del seu volum. Per tal de millorar la transferència de calor entre el fluid caloportador (HTF), en aquest cas aigua, i el PCM, aquest Treball de Final de Grau proposa una idea de concepte de disseny d’un dipòsit TES de calor latent
inspirat en la natura (BioTES) que, una vegada materialitzat amb fabricació additiva, es valida mitjançant l’avaluació experimental en un banc d’assaig personalitzat. Una vegada detectades les limitacions en la distribució del flux en
el primer concepte de dipòsit amb orientació vertical, es planteja la redistribució de la geometria interna, a més d’un canvi d’orientació i l’augment de l’àrea efectiva de la superfície d’intercanvi d’energia tèrmica. A més, els resultats de simulacions de dinàmica de fluids (CFD) realitzades per l’empresa externa ANALISIS-DSC, soci del projecte SUSHEAT, mostren que aquest redisseny afavoreix una distribució mñes homogènia del HTF respecte la configuració
vertical (ANALISIS-DSC, n.d.). Els resultats experimentals realitzats amb PCM inorgànic han permès comparar el rendiment energètic entre les configuracions dissenyades i un dipòsit TES de carcassa i tubs. Per una banda, el BioTES horitzontal, completa els processos de càrrega i descàrrega aproximadament en 0,30 h i 1,45 h, respectivament. Aquests valors representen una reducció del temps fins a un 41% en la càrrega i un 40% en la descàrrega respecte als sistemes TES de calor latent analitzats. A més, presenta una millor relació entre l’energia útil emmagatzemada o alliberada i la velocitat a la qual es produeix aquest procés. En conjunt, l’evolució des de l’estructura ramificada, jeràrquica i recursiva del BioTES vertical fins a una geometria tridimensional més distribuïda en el BioTES horitzontal, dona com a resultat l’optimització de l’estructura de la xarxa de distribució assolint una millor homogeneïtzació del fluid caloportador. Així, s’estableix una base per al desenvolupament de futures configuracions bioinspirades més eficients., The use of phase change materials (PCMs) as a medium for thermal energy storage (TES) establishes this technology as an efficient and reliable solution for thermal energy management. This requirement is particularly important in
applications where energy demand and energy consumption do not coincide in time. However, many PCMs exhibit low thermal conductivity, which hinders heat propagation to regions farther from the heat-transfer surface. Therefore, to improve heat transfer between the heat transfer fluid (HTF)—in this study, water—and the PCM, this Bachelor's Final Project proposes a design concept for a nature-inspired latent heat storage TES tank. Once manufactured using additive manufacturing, the proposed concept is validated through experimental evaluation on a custom-built test bench. After identifying limitations in flow distribution in the first vertically oriented tank concept, the internal geometry was redistributed, the System orientation was modified, and the effective heat-transfer surface area was increased. In addition, computational fluid Dynamics (CFD) simulation results obtained by ANALISIS-DSC, a partner of SUSHEAT projetc, show that this redesign promotes a more homogeneous Distribution of the HTF compared with the vertical configuration (ANALISIS-DSC, n.d.).
The experimental results obtained with inorganic PCM enabled the energy performance of the designed configurations to be compared with that of a shelland-tube TES tank. On the one hand, the horizontal BioTES completes the
charging and discharging processes in approximately 0,30 h and 1,45 h, respectively. These values represent reductions of up to 41% in charging time and 40% in discharging time compared with the latent heat TES systems
analyzed. Moreover, it offers a better ratio of useful energy stored or released to the rate at which this process occurs.
Overall, the transition from the branched, hierarchical, and recursive structure of the vertical BioTES to a more distributed, three-dimensional geometry in the horizontal BioTES results in an optimized distribution network, achieving a more homogeneous distribution of the heat-transfer fluid. Thus, this work establishes a basis for the development of more efficient future bio-inspired configurations., This study has received funding from the European Union’s Horizon Europe Research and Innovation Programme under grant agreement No.101103552 (SUSHEAT). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. 2 Aquest treball ha estat finançat pel Ministerio de Ciencia e Innovación – Agencia Estatal de Investigación (AEI) (PID2021 – 123511OB-C31 – MCIN/AEI/ 10.13039/501100011033/FEDER, UE). Aquest treball ha estat finançat pel Ministerio de Ciencia e Innovación – Agencia Estatal de Investigación y Universidades - Agencia Estatal de Investigación (MICIU/AEI /10.13039/501100011033) (RED2024-153629-T). Finalment, agraïr també al Govern Català per l’acreditació de qualitat donada al grup de recerca (2021 SGR 01615) i a la institució catalana ICREA per la concessió de l’ICREA Acadèmia, per segona vegada consecutiva. GREiA és agent certificat TECNIO en la categoria de desenvolupadors de tecnologia de la Generalitat de Catalunya