Skip to main content

Development of thermal energy storage for liquid air energy storage applications

RYC2023-044196-I

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal para Desarrollar, Atraer y Retener Talento
Subprogram Subprograma Estatal de Incorporación
Call Ramón y Cajal
Call year 2023
State Plan 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE LLEIDA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Reduction of thermochemical thermal energy storage materials by using sustainable matrix materials

  • Borri, Emiliano
  • Mastronardo, Emanuela
  • Calabrese, Luigi
  • Escribà i Gelonch, Marc
  • Estruch Bosch, Esther
  • Ribezzo, Alessandro
  • Cabeza, Luisa F.
This paper is a preliminary study of the reduction in the impact factor of thermochemical energy storage systems for cooling by using sustainable matrix materials, biochar in this case, substituting other conventional matrix materials such as polymers, zeolites, or vermiculite. Results show that using recycled materials drastically reduces the impact of storage systems., This study was funded by the European Union’s Horizon Europe Research and Innovation Programme under grant agreement CharCool (101162196). Views and opinions expressed are however those of the authors only and do not necessarily reflect those of the European Union or EISMEA. Neither the European Union nor the granting authority can be held responsible for them. This work is partially supported by ICREA under the ICREA Academia programme. This paper is part of the RYC2023-044196-I, funded by MCIU/AEI/10.13039/501100011033 and FSE+. The authors at the University of Lleida would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Improved modeling of thermal energy storage tanks state of charge Using LSTM neural networks and image segmentation

  • Mateu Piñol, Carles
  • Rojas Cala, Edgar Felipe
  • Béjar Torres, Ramón
  • Borri, Emiliano
  • Cabeza, Luisa F.
This study presents a deep learning framework designed to accelerate the modeling of sensible heat thermal energy storage (TES) tanks, addressing the high computational costs associated with traditional computational fluid dynamics (CFD). By integrating long short-term memory (LSTM) neural networks with image segmentation, the authors developed a method to predict the thermal state of charge across various tank configurations characterized by different internal arrangements of solid storage spheres. A dataset comprising over 7 million thermal images from 2D CFD simulations was used to train and compare several architectures, including Convolutional Autoencoders and Inception-based models. The results demonstrate that an Autoencoder-LSTM architecture, particularly when segmentation data is introduced after the recurrent layer, yields the highest accuracy with a Structural Similarity Index (SSIM) of 86.7%. While the approach offers a rapid and viable alternative for evaluating diverse tank geometries, the study also identifies challenges regarding cumulative errors in long-term sequence predictions, suggesting future directions for optimizing AI-driven thermal analysis., This project was funded by the European Union Horizon Europe Research and Innovation Pro-gramme under grant agreement 101103552 (SUSHEAT). Views and opinions expressed are, however, those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This paper is part of the RYC2023-044196-I, funded by MCIU/AEI/10.13039/501100011033 and FSE+. The authors thank the Generalitat de Catalunya for the quality accreditation granted to their research group (2021 SGR 01615). GREiA is a cer-tified agent TECNIO in the category of technology developers of the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Experimental study of cascade finned shell and tube TES tanks with organic phase change materials

  • Megra, Kassahun Tadesse
  • Mani Kala, Saranprabhu
  • Peccolo, Simone
  • Zsembinszki, Gabriel
  • Borri, Emiliano
  • Prieto, Cristina
  • Cabeza, Luisa F.
Latent heat thermal energy storage (TES) systems using phase change materials (PCMs) are promising for mitigating renewable energy intermittency and improving waste heat recovery, due to their high energy density and near-constant operating temperature. To increase energy storage capacity, PCMs can operate beyond their melting point, but this induces thermal stress. Cascade TES systems overcome these issues by using multiple PCMs with different melting points and enable multilevel energy utilisation. A custom-built experimental setup is used to investigate the charging and discharging characteristics of a three-stage cascade TES system using organic PCMs in finned shell and tube TES tanks. The results show that cascade systems can be effectively integrated over a wide temperature range, storing a higher energy than single stage systems., This project was funded by the European Union Horizon Europe Research and Innovation Programme under grant agreement 101084182 (HYBRIDplus). Views and opinions expressed are, however, those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This paper is part of the RYC2023-044196-I, funded by Ministerio de Ciencia e Innovación y Universidades - Agencia Estatal de Investigación MICIU/AEI/10.13039/501100011033 and FSE+. This work is also Funded by Ministerio de Ciencia e Innovación y Universidades - Agencia Estatal de Investigación (MICIU/AEI /10.13039/501100011033) (RED2024-153629-T). The authors also thank the Generalitat de Catalunya for the quality accreditation granted to their research group (2021 SGR 01615). GREiA is a certified agent TECNIO in the category of technology developers of the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Performance of PCM-Enhanced Cementitious Composites and Textile-Reinforced Walls: Mechanical Characterization and OpenFOAM Numerical Investigation for Energy-Efficient Buildings

  • Abdelkarim, Mariem
  • Borri, Emiliano
  • Bouadila, Salwa
  • Cabeza, Luisa F.
This study investigates the integration of phase change materials (PCMs) and recycled textile fibers into cementitious composites to improve the thermomechanical performance and energy efficiency of building envelopes. Experimentally, eco-efficient mortars were developed by partially replacing sand with recycled textile fibers (0–40% by volume) and microencapsulated PCM (0–30% by volume) across sixteen distinct formulations. The fresh-state workability, apparent density, compressive strength, and flexural strength were systematically characterized after 28 days of curing. Results show that while PCM addition lowers composite density and mechanical resistance, textile fibers effectively mitigate compressive strength loss and enhance flexural strength by up to 70% through crack-bridging mechanisms. Numerically, an open-source conjugate heat transfer (CHT) framework was developed in OpenFOAM using the chtMultiRegionFoam solver and a temperature-dependent apparent heat capacity formulation to simulate the thermal response of concrete walls lined with an inner textile-reinforced mortar (TRM) skin. The numerical framework was experimentally validated against the literature’s benchmark data, reproducing diurnal surface temperature profiles with high fidelity. A parametric investigation of the inner composite skin thickness (2, 4, and 6 mm in the numerical model, corresponding to 20, 40, and 60 mm prototype layers) was conducted. The analysis reveals that incorporating a PCM-loaded TRM skin dampens internal thermal swings, lowers the required cooling demand, and reduces occupant thermal stress by over 20% compared to plain concrete. This integrated approach establishes an eco-efficient route for valorizing industrial textile waste while embedding passive thermal regulation directly within structural envelopes., This study was supported by the Thermal Processes Laboratory of the Research and Technology Center of Energy (CRTEn) and the University of Tunis El Manar in Tunisia. This work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This paper is part of the RYC2023-044196-I, funded by MCIU/AEI/10.13039/501100011033 and FSE+.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Thermal characterisation of bio-based PCM-integrated wood composites as passive thermal energy storage materials for buildings

  • Ahmed, Wagar
  • Borri, Emiliano
  • Zsembinszki, Gabriel
  • Nazari, Meysam
  • Gritsch, Sebastian
  • Bischof, Sabrina
  • Moro, Annalisa
  • Cartabia, Marco
  • Nigrone, Manuele
  • Palanti, Sabrina
  • Terziev, Nasko
  • Cabeza, Luisa F.
Bio-based phase change materials (PCMs) integrated into wood-based composites are receiving growing research attention due to their low environmental impact, renewability, and potential to enhance passive thermal energy storage in buildings; however, their practical implementation is constrained by insufficient application-oriented thermal characterisation under realistic building conditions. This study focused on the thermal characterisation of PCM-impregnated wood composite samples specifically developed within the project BIOBUILD. The objective of the study was to quantify the influence of PCM incorporation on heat transfer mechanisms, thermal inertia, and energy storage behaviour. The results demonstrated that Lignin-based composites exhibited the most balanced thermal behaviour for envelope integration, whereas mycelium-based systems showed predominantly insulation-oriented performance., This project was co-funded by the European Union Horizon Europe Research and Innovation Programme under grant agreement 101135629 (BIOBUILD). Views and opinions expressed are, however, those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This paper is part of the RYC2023-044196-I, funded by MCIU/AEI/10.13039/501100011033 and FSE+. The authors also thank the Generalitat de Catalunya for the quality accreditation granted to their research group (2021 SGR 01615). GREiA is a certified agent TECNIO in the category of technology developers of the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Metal alloy phase change material for thermal energy storage systems: characterization and compatibility studies

  • Mani Kala, Saranprabhu
  • Wolf, Gerhar
  • Borri, Emiliano
  • Reinholz, Jonas
  • Kugler, Felix
  • Escribà i Gelonch, Marc
  • Prieto, Cristina
  • Cabeza, Luisa F.
Thermal energy storage (TES) systems using phase change materials (PCM) as an energy storage medium offer several advantages; however, drawbacks appear when employing inorganic PCM, including low thermal conductivity and corrosion issues. In this study, a ZnAl6 metal alloy PCM was selected, and its potential for use in TES systems was explored. The thermophysical properties of the metal alloy were measured, including latent heat, melting point, solidification point, and degradation temperature. The metal alloy PCM was further evaluated for its compatibility with a stainless-steel tube by subjecting it to thermal cycling in a furnace, encompassing 1,000 cycles between its melting and solidification temperatures. FeAl phases were observed to form at the junction near the stainless-steel tube in contact with the PCM. Furthermore, the ZnAl6 eutectic composition remained stable even after 1000 thermal cycles., This research was funded by the German Ministry of Education and Research under grant no. 03SF0541 and the CETPartnership, the Clean Energy Transition Partnership is a transnational joint programming initiative to boost and accelerate the energy transition, building upon regional and national RDI funding programmes. The initiative is receiving funding from the European Union’s research and innovation programme “Horizon Europe” under grant agreement No 101069750. This paper is part of the PID2024-156068OB-C21 and RYC2023-044196-I, funded by MCIU/AEI/10.13039/501100011033 and FSE+. This work is also funded by Ministerio de Ciencia e Innovación y Universidades - Agencia Estatal de Investigación (MICIU/AEI /10.13039/501100011033) (RED2024-153629-T).Also, this work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Performance of PCM-Enhanced Cementitious Composites and Textile-Reinforced Walls: Mechanical Characterization and OpenFOAM Numerical Investigation for Energy-Efficient Buildings

  • Abdelkarim, Mariem
  • Borri, Emiliano
  • Bouadila, Salwa
  • Cabeza, Luisa F.
This study investigates the integration of phase change materials (PCMs) and recycled textile fibers into cementitious composites to improve the thermomechanical performance and energy efficiency of building envelopes. Experimentally, eco-efficient mortars were developed by partially replacing sand with recycled textile fibers (0–40% by volume) and microencapsulated PCM (0–30% by volume) across sixteen distinct formulations. The fresh-state workability, apparent density, compressive strength, and flexural strength were systematically characterized after 28 days of curing. Results show that while PCM addition lowers composite density and mechanical resistance, textile fibers effectively mitigate compressive strength loss and enhance flexural strength by up to 70% through crack-bridging mechanisms. Numerically, an open-source conjugate heat transfer (CHT) framework was developed in OpenFOAM using the chtMultiRegionFoam solver and a temperature-dependent apparent heat capacity formulation to simulate the thermal response of concrete walls lined with an inner textile-reinforced mortar (TRM) skin. The numerical framework was experimentally validated against the literature’s benchmark data, reproducing diurnal surface temperature profiles with high fidelity. A parametric investigation of the inner composite skin thickness (2, 4, and 6 mm in the numerical model, corresponding to 20, 40, and 60 mm prototype layers) was conducted. The analysis reveals that incorporating a PCM-loaded TRM skin dampens internal thermal swings, lowers the required cooling demand, and reduces occupant thermal stress by over 20% compared to plain concrete. This integrated approach establishes an eco-efficient route for valorizing industrial textile waste while embedding passive thermal regulation directly within structural envelopes., This study was supported by the Thermal Processes Laboratory of the Research and Technology Center of Energy (CRTEn) and the University of Tunis El Manar in Tunisia. This work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This paper is part of the RYC2023-044196-I, funded by MCIU/AEI/10.13039/501100011033 and FSE+.
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Metal alloy phase change material for thermal energy storage systems: characterization and compatibility studies

  • Mani Kala, Saranprabhu
  • Wolf, Gerhar
  • Borri, Emiliano
  • Reinholz, Jonas
  • Kugler, Felix
  • Escribà i Gelonch, Marc
  • Prieto, Cristina
  • Cabeza, Luisa F.
Thermal energy storage (TES) systems using phase change materials (PCM) as an energy storage medium offer several advantages; however, drawbacks appear when employing inorganic PCM, including low thermal conductivity and corrosion issues. In this study, a ZnAl6 metal alloy PCM was selected, and its potential for use in TES systems was explored. The thermophysical properties of the metal alloy were measured, including latent heat, melting point, solidification point, and degradation temperature. The metal alloy PCM was further evaluated for its compatibility with a stainless-steel tube by subjecting it to thermal cycling in a furnace, encompassing 1,000 cycles between its melting and solidification temperatures. FeAl phases were observed to form at the junction near the stainless-steel tube in contact with the PCM. Furthermore, the ZnAl6 eutectic composition remained stable even after 1000 thermal cycles., This research was funded by the German Ministry of Education and Research under grant no. 03SF0541 and the CETPartnership, the Clean Energy Transition Partnership is a transnational joint programming initiative to boost and accelerate the energy transition, building upon regional and national RDI funding programmes. The initiative is receiving funding from the European Union’s research and innovation programme “Horizon Europe” under grant agreement No 101069750. This paper is part of the PID2024-156068OB-C21 and RYC2023-044196-I, funded by MCIU/AEI/10.13039/501100011033 and FSE+. This work is also funded by Ministerio de Ciencia e Innovación y Universidades - Agencia Estatal de Investigación (MICIU/AEI /10.13039/501100011033) (RED2024-153629-T).Also, this work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Reduction of thermochemical thermal energy storage materials by using sustainable matrix materials

  • Borri, Emiliano
  • Mastronardo, Emanuela
  • Calabrese, Luigi
  • Escribà i Gelonch, Marc
  • Estruch Bosch, Esther
  • Ribezzo, Alessandro
  • Cabeza, Luisa F.
This paper is a preliminary study of the reduction in the impact factor of thermochemical energy storage systems for cooling by using sustainable matrix materials, biochar in this case, substituting other conventional matrix materials such as polymers, zeolites, or vermiculite. Results show that using recycled materials drastically reduces the impact of storage systems., This study was funded by the European Union’s Horizon Europe Research and Innovation Programme under grant agreement CharCool (101162196). Views and opinions expressed are however those of the authors only and do not necessarily reflect those of the European Union or EISMEA. Neither the European Union nor the granting authority can be held responsible for them. This work is partially supported by ICREA under the ICREA Academia programme. This paper is part of the RYC2023-044196-I, funded by MCIU/AEI/10.13039/501100011033 and FSE+. The authors at the University of Lleida would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Experimental study of cascade finned shell and tube TES tanks with organic phase change materials

  • Megra, Kassahun Tadesse
  • Mani Kala, Saranprabhu
  • Peccolo, Simone
  • Zsembinszki, Gabriel
  • Borri, Emiliano
  • Prieto, Cristina
  • Cabeza, Luisa F.
Latent heat thermal energy storage (TES) systems using phase change materials (PCMs) are promising for mitigating renewable energy intermittency and improving waste heat recovery, due to their high energy density and near-constant operating temperature. To increase energy storage capacity, PCMs can operate beyond their melting point, but this induces thermal stress. Cascade TES systems overcome these issues by using multiple PCMs with different melting points and enable multilevel energy utilisation. A custom-built experimental setup is used to investigate the charging and discharging characteristics of a three-stage cascade TES system using organic PCMs in finned shell and tube TES tanks. The results show that cascade systems can be effectively integrated over a wide temperature range, storing a higher energy than single stage systems., This project was funded by the European Union Horizon Europe Research and Innovation Programme under grant agreement 101084182 (HYBRIDplus). Views and opinions expressed are, however, those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This paper is part of the RYC2023-044196-I, funded by Ministerio de Ciencia e Innovación y Universidades - Agencia Estatal de Investigación MICIU/AEI/10.13039/501100011033 and FSE+. This work is also Funded by Ministerio de Ciencia e Innovación y Universidades - Agencia Estatal de Investigación (MICIU/AEI /10.13039/501100011033) (RED2024-153629-T). The authors also thank the Generalitat de Catalunya for the quality accreditation granted to their research group (2021 SGR 01615). GREiA is a certified agent TECNIO in the category of technology developers of the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Improved modeling of thermal energy storage tanks state of charge Using LSTM neural networks and image segmentation

  • Mateu Piñol, Carles
  • Rojas Cala, Edgar Felipe
  • Béjar Torres, Ramón
  • Borri, Emiliano
  • Cabeza, Luisa F.
This study presents a deep learning framework designed to accelerate the modeling of sensible heat thermal energy storage (TES) tanks, addressing the high computational costs associated with traditional computational fluid dynamics (CFD). By integrating long short-term memory (LSTM) neural networks with image segmentation, the authors developed a method to predict the thermal state of charge across various tank configurations characterized by different internal arrangements of solid storage spheres. A dataset comprising over 7 million thermal images from 2D CFD simulations was used to train and compare several architectures, including Convolutional Autoencoders and Inception-based models. The results demonstrate that an Autoencoder-LSTM architecture, particularly when segmentation data is introduced after the recurrent layer, yields the highest accuracy with a Structural Similarity Index (SSIM) of 86.7%. While the approach offers a rapid and viable alternative for evaluating diverse tank geometries, the study also identifies challenges regarding cumulative errors in long-term sequence predictions, suggesting future directions for optimizing AI-driven thermal analysis., This project was funded by the European Union Horizon Europe Research and Innovation Pro-gramme under grant agreement 101103552 (SUSHEAT). Views and opinions expressed are, however, those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This paper is part of the RYC2023-044196-I, funded by MCIU/AEI/10.13039/501100011033 and FSE+. The authors thank the Generalitat de Catalunya for the quality accreditation granted to their research group (2021 SGR 01615). GREiA is a cer-tified agent TECNIO in the category of technology developers of the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Thermal characterisation of bio-based PCM-integrated wood composites as passive thermal energy storage materials for buildings

  • Ahmed, Wagar
  • Borri, Emiliano
  • Zsembinszki, Gabriel
  • Nazari, Meysam
  • Gritsch, Sebastian
  • Bischof, Sabrina
  • Moro, Annalisa
  • Cartabia, Marco
  • Nigrone, Manuele
  • Palanti, Sabrina
  • Terziev, Nasko
  • Cabeza, Luisa F.
Bio-based phase change materials (PCMs) integrated into wood-based composites are receiving growing research attention due to their low environmental impact, renewability, and potential to enhance passive thermal energy storage in buildings; however, their practical implementation is constrained by insufficient application-oriented thermal characterisation under realistic building conditions. This study focused on the thermal characterisation of PCM-impregnated wood composite samples specifically developed within the project BIOBUILD. The objective of the study was to quantify the influence of PCM incorporation on heat transfer mechanisms, thermal inertia, and energy storage behaviour. The results demonstrated that Lignin-based composites exhibited the most balanced thermal behaviour for envelope integration, whereas mycelium-based systems showed predominantly insulation-oriented performance., This project was co-funded by the European Union Horizon Europe Research and Innovation Programme under grant agreement 101135629 (BIOBUILD). Views and opinions expressed are, however, those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This paper is part of the RYC2023-044196-I, funded by MCIU/AEI/10.13039/501100011033 and FSE+. The authors also thank the Generalitat de Catalunya for the quality accreditation granted to their research group (2021 SGR 01615). GREiA is a certified agent TECNIO in the category of technology developers of the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.