Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Determination of enthalpy in the composites of wood and bio-based phase change materials

  • Nazari, Meysam
  • Terziev, Nasko
Incorporation of wood materials in buildings sector shows a promising outlook towards decarbonization of construction industry. Wood materials impregnated with bio-based phase change materials (BPCM) can enhance thermal mass of the envelopes for internal use with ability to store and release thermal energy leading to using thermal energy more efficiently. However, determination of enthalpy in wood/BPCM composites is challenging. The present work, based on transient heat conduction principle introduces an approach to define the parameter in wood/BPCM composites. The results show that the enthalpy in the composites is proportional to the enthalpy and amount of the BPCM. Ethyl palmitate ester with enthalpy of 213 J/g was used as BPCM and incorporated with different percentage in wood composites. The result showed that if the BPCM counts for 50% of the composites the enthalpy of the composites becomes 106 J/g., This project was co-funded by the European Union Horizon Europe Research and Innovation Programme under grant agreement 101135629 (BIOBUILD). Views and opinions expressed are, however, those of the author(s) only and do not necessarily reflect those of the European Union. Neither the European Union nor the granting authority can be held responsible for them.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Thermal characterisation of bio-based PCM-integrated wood composites as passive thermal energy storage materials for buildings

  • Ahmed, Wagar
  • Borri, Emiliano
  • Zsembinszki, Gabriel
  • Nazari, Meysam
  • Gritsch, Sebastian
  • Bischof, Sabrina
  • Moro, Annalisa
  • Cartabia, Marco
  • Nigrone, Manuele
  • Palanti, Sabrina
  • Terziev, Nasko
  • Cabeza, Luisa F.
Bio-based phase change materials (PCMs) integrated into wood-based composites are receiving growing research attention due to their low environmental impact, renewability, and potential to enhance passive thermal energy storage in buildings; however, their practical implementation is constrained by insufficient application-oriented thermal characterisation under realistic building conditions. This study focused on the thermal characterisation of PCM-impregnated wood composite samples specifically developed within the project BIOBUILD. The objective of the study was to quantify the influence of PCM incorporation on heat transfer mechanisms, thermal inertia, and energy storage behaviour. The results demonstrated that Lignin-based composites exhibited the most balanced thermal behaviour for envelope integration, whereas mycelium-based systems showed predominantly insulation-oriented performance., This project was co-funded by the European Union Horizon Europe Research and Innovation Programme under grant agreement 101135629 (BIOBUILD). Views and opinions expressed are, however, those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This paper is part of the RYC2023-044196-I, funded by MCIU/AEI/10.13039/501100011033 and FSE+. The authors also thank the Generalitat de Catalunya for the quality accreditation granted to their research group (2021 SGR 01615). GREiA is a certified agent TECNIO in the category of technology developers of the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Integration of thermal energy storage (TES) technologies in buildings (Nit Europea de la Recerca 2025)

  • Ahmed, Waqar
Thermal energy is the energy that comes from heat. It is the energy that helps to keep things warm or cool. Thermal energy storage (TES) is a way to save heat or cold so you can use it later when you need it. TES helps to keep buildings warm in winter and cool in summer by storing heat or cold and using it when needed. In a building with a good TES system, we can reduce heating bills and use less energy from the electricity grid., This project is also co-funded by the European Union’s project BIOBUILD (GA 101135629). Views and opinions expressed are, however, those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This work was partially funded by the Ministerio de Ciencia e Innovación – Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31 – MCIN/AEI/10.13039/501100011033/FEDER, UE) and by the Ministerio de Ciencia e Innovación y Universidades – Agencia Estatal de Investigación (AEI) (RED2022-134219-T). This work is also supported by the RYC2023-044196-L, funded by MCIN/AEI/10.13039/501100011033 and FSE+. This work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is a certified TECNIO agent in the category of technology developers of the Government of Catalonia. This project is co-funded by the European Union’s research and innovation programme Horizon Europe under the project NitRecercat (GA 101162003).
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Evaluating effective thermal conductivity of PCM-impregnated wood composite at phase change temperature

  • Cabeza, Luisa F.
  • Mani Kala, Saranprabhu
  • Ahmed, Waqar
  • Nazari, Meysam
  • Terziev, Nasko
  • Bischof, Sabrina
  • Gritsch, Sebastian
  • Borri, Emiliano
  • Zsembinszki, Gabriel
This study examines the effective thermal conductivity of wood composite impregnated with phase change material (PCM) during the PCM phase change process. Incorporating PCMs into wood stabilizes its shape and boosts energy storage capacity, broadening its applications in buildings while reducing energy usage. Most previous studies on PCM focused solely on acquiring the thermal conductivity in their solid state, leaving a gap in research concerning their liquid state. In this study, a PCM-impregnated wood composite was developed with bio-based binders. The effective thermal conductivity was analysed across a temperature spectrum in which the impregnated PCM, ethyl palmitate, exists in three distinct phases: solid, liquid, and mushy (a mix of solid and liquid phases). The results indicate a notable variation in effective thermal conductivity during the phase change process. At 10 °C, the solid PCM has an effective thermal conductivity of 0.13 W/m·K, while at 40 °C, its liquid state maintains the same value. However, a significant 48 % increase in effective thermal conductivity was observed during the phase change temperature measured using a hot disk instrument. These findings are expected to provide valuable insights for both researchers and industrial sectors that use PCMs for TES., This project was co-funded by the European Union's Horizon Europe Research and Innovation Programme under grant agreement 101135629 (BIOBUILD). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or REA. Neither the European Union nor the granting authority can be held responsible for them. This paper is part of the RYC2023-044196-I, funded by MCIU/AEI/10.13039/501100011033 and FSE+. This work was partially funded by the Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (PID2021- 123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, UE). This work was partially funded by Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (RED2024-153629-T). This work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Evaluating effective thermal conductivity of PCM-impregnated wood composite at phase change temperature

  • Cabeza, Luisa F.
  • Mani Kala, Saranprabhu
  • Ahmed, Waqar
  • Nazari, Meysam
  • Terziev, Nasko
  • Bischof, Sabrina
  • Gritsch, Sebastian
  • Borri, Emiliano
  • Zsembinszki, Gabriel
This study examines the effective thermal conductivity of wood composite impregnated with phase change material (PCM) during the PCM phase change process. Incorporating PCMs into wood stabilizes its shape and boosts energy storage capacity, broadening its applications in buildings while reducing energy usage. Most previous studies on PCM focused solely on acquiring the thermal conductivity in their solid state, leaving a gap in research concerning their liquid state. In this study, a PCM-impregnated wood composite was developed with bio-based binders. The effective thermal conductivity was analysed across a temperature spectrum in which the impregnated PCM, ethyl palmitate, exists in three distinct phases: solid, liquid, and mushy (a mix of solid and liquid phases). The results indicate a notable variation in effective thermal conductivity during the phase change process. At 10 °C, the solid PCM has an effective thermal conductivity of 0.13 W/m·K, while at 40 °C, its liquid state maintains the same value. However, a significant 48 % increase in effective thermal conductivity was observed during the phase change temperature measured using a hot disk instrument. These findings are expected to provide valuable insights for both researchers and industrial sectors that use PCMs for TES., This project was co-funded by the European Union's Horizon Europe Research and Innovation Programme under grant agreement 101135629 (BIOBUILD). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or REA. Neither the European Union nor the granting authority can be held responsible for them. This paper is part of the RYC2023-044196-I, funded by MCIU/AEI/10.13039/501100011033 and FSE+. This work was partially funded by the Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (PID2021- 123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, UE). This work was partially funded by Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (RED2024-153629-T). This work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Thermal characterisation of bio-based PCM-integrated wood composites as passive thermal energy storage materials for buildings

  • Ahmed, Wagar
  • Borri, Emiliano
  • Zsembinszki, Gabriel
  • Nazari, Meysam
  • Gritsch, Sebastian
  • Bischof, Sabrina
  • Moro, Annalisa
  • Cartabia, Marco
  • Nigrone, Manuele
  • Palanti, Sabrina
  • Terziev, Nasko
  • Cabeza, Luisa F.
Bio-based phase change materials (PCMs) integrated into wood-based composites are receiving growing research attention due to their low environmental impact, renewability, and potential to enhance passive thermal energy storage in buildings; however, their practical implementation is constrained by insufficient application-oriented thermal characterisation under realistic building conditions. This study focused on the thermal characterisation of PCM-impregnated wood composite samples specifically developed within the project BIOBUILD. The objective of the study was to quantify the influence of PCM incorporation on heat transfer mechanisms, thermal inertia, and energy storage behaviour. The results demonstrated that Lignin-based composites exhibited the most balanced thermal behaviour for envelope integration, whereas mycelium-based systems showed predominantly insulation-oriented performance., This project was co-funded by the European Union Horizon Europe Research and Innovation Programme under grant agreement 101135629 (BIOBUILD). Views and opinions expressed are, however, those of the author(s) only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. This paper is part of the RYC2023-044196-I, funded by MCIU/AEI/10.13039/501100011033 and FSE+. The authors also thank the Generalitat de Catalunya for the quality accreditation granted to their research group (2021 SGR 01615). GREiA is a certified agent TECNIO in the category of technology developers of the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Determination of enthalpy in the composites of wood and bio-based phase change materials

  • Nazari, Meysam
  • Terziev, Nasko
Incorporation of wood materials in buildings sector shows a promising outlook towards decarbonization of construction industry. Wood materials impregnated with bio-based phase change materials (BPCM) can enhance thermal mass of the envelopes for internal use with ability to store and release thermal energy leading to using thermal energy more efficiently. However, determination of enthalpy in wood/BPCM composites is challenging. The present work, based on transient heat conduction principle introduces an approach to define the parameter in wood/BPCM composites. The results show that the enthalpy in the composites is proportional to the enthalpy and amount of the BPCM. Ethyl palmitate ester with enthalpy of 213 J/g was used as BPCM and incorporated with different percentage in wood composites. The result showed that if the BPCM counts for 50% of the composites the enthalpy of the composites becomes 106 J/g., This project was co-funded by the European Union Horizon Europe Research and Innovation Programme under grant agreement 101135629 (BIOBUILD). Views and opinions expressed are, however, those of the author(s) only and do not necessarily reflect those of the European Union. Neither the European Union nor the granting authority can be held responsible for them.