Skip to main content

DESARROLLO Y ANALISIS DE FORMULACIONES HDG PARA PROBLEMAS HETEROGENEOS EN DINAMICA DE FLUIDOS COMPUTACIONAL (DAFOH2)

MTM2013-46313-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2013
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Coupling of continuous and HDG methods

  • Paipuri, Mahendra
  • Tiago, Carlos
  • Fernández Méndez, Sonia|||0000-0002-9305-7684
A coupling strategy between hybridizable discontinuous Galerkin (HDG) and continuous Galerkin (CG) methods is proposed in the framework of second-order elliptic operators. The coupled formulation is implemented and its convergence properties are established numerically by using manufactured solutions. The influence of the tau parameter on the coupled formulation is studied., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Comparison of continuous and hybridizable discontinuous Galerkin methods in incompressible fluid flow problems

  • Fernández Méndez, Sonia|||0000-0002-9305-7684
A comparison of the computational efficiency between Continuous Galerkin (CG) methods, with Taylor–Hood approximations, and Hybridizable Discontinuous Galerkin (HDG) methods is presented for the solution of the incompressible Stokes and Navier–Stokes equations. Both methods are implemented under the same platform and study is made in terms of CPU time and accuracy for steady state problems using triangular and quadrilateral elements. Several plots like error vs. CPU time of the linear solver, error vs. ratio of CPU times of HDG to CG, etc. are presented. The results suggest that HDG is computationally more efficient than CG for high degree of approximation, for a given level of accuracy, as HDG produces lesser error than CG for a given mesh and degree., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

A 3D CFD numerical study of the bubble generation process into a bubble Tjunction generator and its comparison with experimental data: Part I

  • Arias Calderón, Santiago|||0000-0001-9233-0178
  • Villardi de Montlaur, Adeline de|||0000-0002-0243-668X
This work presents a 3D numerical study of the bubble generation process into a bubble generator obtained with the commercial Computational Fluid Dynamics solver ANSYS Fluent v15.0.7, and its comparison with experimental data reproducing the same conditions. The bubble generator is formed by two perpendicular capillaries in which liquid and gas are injected at perpendicular directions into a 1 mm internal diameter capillary T-junction with a total length of 10 mm. The fluids used in experiments and CFD simulations are air and water, both of them considered incompressible and isothermal, at a room temperature of 25º. A total of 23 different cases are studied for different injection conditions, and results between numerical simulations and experiments are compared. In this first part of the analysis, we focus on the flow pattern regimes and the dynamics of the bubble generation process. In addition to the new numerical simulations presented here, a new model has been used to predict the bubble generation frequency and tested with both experimental and numerical data. Results on bubble generation frequency are also presented by means of the non-dimensional Strouhal number. Same types of patterns, bubble and slug flow regimes, are obtained in simulations and experiments. In order to perform an exhaustive validation and comparison of numerical simulations with experimental data, several parameters have been selected: bubble velocity, volumetric void fraction, bubble generation frequency, Strouhal number and bubble equivalent diameter. Numerical simulations agree qualitatively, but not always quantitatively, with experimental results., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Coupling of continuous and HDG methods

  • Paipuri, Mahendra
  • Tiago, Carlos
  • Fernández Méndez, Sonia
A coupling strategy between hybridizable discontinuous Galerkin (HDG) and continuous Galerkin (CG) methods is proposed in the framework of second-order elliptic operators. The coupled formulation is implemented and its convergence properties are established numerically by using manufactured solutions. The influence of the tau parameter on the coupled formulation is studied., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

A 3D CFD numerical study of the bubble generation process into a bubble Tjunction generator and its comparison with experimental data: Part I

  • Arias Calderón, Santiago
  • Villardi de Montlaur, Adeline de
This work presents a 3D numerical study of the bubble generation process into a bubble generator obtained with the commercial Computational Fluid Dynamics solver ANSYS Fluent v15.0.7, and its comparison with experimental data reproducing the same conditions. The bubble generator is formed by two perpendicular capillaries in which liquid and gas are injected at perpendicular directions into a 1 mm internal diameter capillary T-junction with a total length of 10 mm. The fluids used in experiments and CFD simulations are air and water, both of them considered incompressible and isothermal, at a room temperature of 25º. A total of 23 different cases are studied for different injection conditions, and results between numerical simulations and experiments are compared. In this first part of the analysis, we focus on the flow pattern regimes and the dynamics of the bubble generation process. In addition to the new numerical simulations presented here, a new model has been used to predict the bubble generation frequency and tested with both experimental and numerical data. Results on bubble generation frequency are also presented by means of the non-dimensional Strouhal number. Same types of patterns, bubble and slug flow regimes, are obtained in simulations and experiments. In order to perform an exhaustive validation and comparison of numerical simulations with experimental data, several parameters have been selected: bubble velocity, volumetric void fraction, bubble generation frequency, Strouhal number and bubble equivalent diameter. Numerical simulations agree qualitatively, but not always quantitatively, with experimental results., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Comparison of continuous and hybridizable discontinuous Galerkin methods in incompressible fluid flow problems

  • Fernández Méndez, Sonia
A comparison of the computational efficiency between Continuous Galerkin (CG) methods, with Taylor–Hood approximations, and Hybridizable Discontinuous Galerkin (HDG) methods is presented for the solution of the incompressible Stokes and Navier–Stokes equations. Both methods are implemented under the same platform and study is made in terms of CPU time and accuracy for steady state problems using triangular and quadrilateral elements. Several plots like error vs. CPU time of the linear solver, error vs. ratio of CPU times of HDG to CG, etc. are presented. The results suggest that HDG is computationally more efficient than CG for high degree of approximation, for a given level of accuracy, as HDG produces lesser error than CG for a given mesh and degree., Peer Reviewed, Postprint (published version)