Skip to main content

ELECTRIFICACION DEL ALMACENAMIENTO DE ENERGIA TERMICA PARA LA GENERACION EFICIENTE DE VAPOR EN PROCESOS INDUSTRIALES

PID2024-156068OB-C21

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal para la Investigación y el Desarrollo Experimental
Subprogram Subprograma Estatal de Generación de Conocimiento Científico-Técnico y Desarrollo Experimental
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2024
State Plan 2024-2027 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE LLEIDA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

A systematic benchmark of thermal energy storage schemes in concentrating solar power applications

  • Tagle-Salazar, Pablo
  • Cabeza, Luisa F.
  • López-Román, Anton
  • Prieto, Cristina
Thermal energy storage (TES) plays a crucial role in enhancing the efficiency and reliability of concentrating solar power (CSP) plants by mitigating the intermittent nature of solar energy. Although molten salts are the predominant TES solution, alternative systems such as solid-state and latent heat storage offer promising advantages. This study investigated the impact of three TES technologies, namely two-tank molten salt, concrete-based storage, and phase change materials (PCMs), on the performance of CSP systems. By assessing the key performance indicators on an annual timescale and under identical operating conditions, this study elucidates the suitability of each TES technology for CSP plant operations. All three concepts demonstrated comparable performance at both the system and TES levels, with differences of less than 3%. The advantage of PCM lies in its substantial volume reduction of approximately 27% compared to molten salt, whereas concrete TES achieves similar results with a slight increase in volume relative to the molten salt TES., This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (MICIU/AEI /10.13039/501100011033) (RED2024-153629-T), by the Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, UE), and by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (MICIU/AEI /10.13039/501100011033 and FSE+) (PID2024-156068OB-C21 and PID2024-156068OB-C22).). This work is partially supported by ICREA under the ICREA Academia programme. The authors at the University of Lleida would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Metal alloy phase change material for thermal energy storage systems: characterization and compatibility studies

  • Mani Kala, Saranprabhu
  • Wolf, Gerhar
  • Borri, Emiliano
  • Reinholz, Jonas
  • Kugler, Felix
  • Escribà i Gelonch, Marc
  • Prieto, Cristina
  • Cabeza, Luisa F.
Thermal energy storage (TES) systems using phase change materials (PCM) as an energy storage medium offer several advantages; however, drawbacks appear when employing inorganic PCM, including low thermal conductivity and corrosion issues. In this study, a ZnAl6 metal alloy PCM was selected, and its potential for use in TES systems was explored. The thermophysical properties of the metal alloy were measured, including latent heat, melting point, solidification point, and degradation temperature. The metal alloy PCM was further evaluated for its compatibility with a stainless-steel tube by subjecting it to thermal cycling in a furnace, encompassing 1,000 cycles between its melting and solidification temperatures. FeAl phases were observed to form at the junction near the stainless-steel tube in contact with the PCM. Furthermore, the ZnAl6 eutectic composition remained stable even after 1000 thermal cycles., This research was funded by the German Ministry of Education and Research under grant no. 03SF0541 and the CETPartnership, the Clean Energy Transition Partnership is a transnational joint programming initiative to boost and accelerate the energy transition, building upon regional and national RDI funding programmes. The initiative is receiving funding from the European Union’s research and innovation programme “Horizon Europe” under grant agreement No 101069750. This paper is part of the PID2024-156068OB-C21 and RYC2023-044196-I, funded by MCIU/AEI/10.13039/501100011033 and FSE+. This work is also funded by Ministerio de Ciencia e Innovación y Universidades - Agencia Estatal de Investigación (MICIU/AEI /10.13039/501100011033) (RED2024-153629-T).Also, this work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Thermo-mechanical behaviour of steel , fibres reinforced refractory concrete for thermal energy storage applications

  • Alshouha, Abdelrahman
  • Castro Chicot, José Ramón
  • Zsembinszki, Gabriel
  • Mani Kala, Saranprabhu
  • Cabeza, Luisa F.
Based on a review and analysis of recent experimental studies on high-temperature concrete, this study investigates the performance of calcium aluminate concrete developed for sensible thermal energy storage applications. The primary aim of this research is to evaluate the effect of steel fibres on thermo-mechanical behaviour of both non-thermally treated and thermally treated calcium aluminate concrete. Two types of steel fibres were incorporated into the concrete mixtures, that is wavy low carbon steel fibres and wool stainless-steel fibres at varying dosages (0, 30, 50, and 75 kg/m³), to investigate their effect on physical, mechanical, and thermal performance of calcium aluminate concrete at high temperatures up to 700 °C. The results showed that both thermally treated and non-thermally treated concrete reinforced with wavy low carbon steel fibres experienced crack formation and subsequent degradation after 25 thermal cycles, leading to loss of compressive strength and matrix-fibres separation. In contrast, thermally treated concrete reinforced with wool stainless-steel fibres showed stability in retention of compressive strength after 25 thermal cycles. The influence of the steel fibres on the thermo-mechanical behaviour of refractory concrete allows the prediction of the failure mechanism of the composites., This project is part of the PID2024-156068OB-C21, funded by Ministerio de Ciencia e Innovación y Universidades - Agencia Estatal de Investigación MICIU/AEI/10.13039/501100011033 and FSE+, and Agencia Estatal de Investigación (MICIU/AEI /10.13039/501100011033) (RED2024-153629-T). This project was partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Dynamic corrosion testing of AISI 321 stainless steel in molten nitrate salts under realistic electric heater operating conditions

  • Pavón Moreno, M. Carmen
  • Al-Saaidi, Hussein Alawai Ibrahim
  • Prieto, Cristina
The durability and reliability of electric heaters operating in Power-to-Heat systems are strongly influenced by corrosion under real service conditions. Conventional corrosion assessments are typically based on static, isothermal tests, which do not reproduce the combined effects of molten salt flow, thermal gradients, and localized electrical heating. In this work, 321 stainless steel was evaluated in direct contact with molten nitrate salts using a comparative approach combining static tests and dynamic tests performed in a dedicated experimental loop. Dynamic experiments reproduced realistic electric heater operating conditions and were conducted for up to 3000 h. The results show that static tests promote extremely thin and stable oxide layers, whereas dynamic operation leads to thicker, multilayered oxides, cracking, and partial oxide removal. These findings demonstrate that static corrosion data are not representative of material behaviour under realistic operating conditions and highlight the necessity of dynamic corrosion testing for reliable material and lifetime prediction of molten-salt electric heaters., This work was funded by the Ministerio de Ciencia e Innovación de España (MICIU/AEI/ 10.13039/501100011033) and by ERDF/EU (Grant Agreement PID2024-156068OB-C22).
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

A systematic benchmark of thermal energy storage schemes in concentrating solar power applications

  • Tagle-Salazar, Pablo
  • Cabeza, Luisa F.
  • López-Román, Anton
  • Prieto, Cristina
Thermal energy storage (TES) plays a crucial role in enhancing the efficiency and reliability of concentrating solar power (CSP) plants by mitigating the intermittent nature of solar energy. Although molten salts are the predominant TES solution, alternative systems such as solid-state and latent heat storage offer promising advantages. This study investigated the impact of three TES technologies, namely two-tank molten salt, concrete-based storage, and phase change materials (PCMs), on the performance of CSP systems. By assessing the key performance indicators on an annual timescale and under identical operating conditions, this study elucidates the suitability of each TES technology for CSP plant operations. All three concepts demonstrated comparable performance at both the system and TES levels, with differences of less than 3%. The advantage of PCM lies in its substantial volume reduction of approximately 27% compared to molten salt, whereas concrete TES achieves similar results with a slight increase in volume relative to the molten salt TES., This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (MICIU/AEI /10.13039/501100011033) (RED2024-153629-T), by the Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (AEI) (PID2021-123511OB-C31 - MCIN/AEI/10.13039/501100011033/FEDER, UE), and by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (MICIU/AEI /10.13039/501100011033 and FSE+) (PID2024-156068OB-C21 and PID2024-156068OB-C22).). This work is partially supported by ICREA under the ICREA Academia programme. The authors at the University of Lleida would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Metal alloy phase change material for thermal energy storage systems: characterization and compatibility studies

  • Mani Kala, Saranprabhu
  • Wolf, Gerhar
  • Borri, Emiliano
  • Reinholz, Jonas
  • Kugler, Felix
  • Escribà i Gelonch, Marc
  • Prieto, Cristina
  • Cabeza, Luisa F.
Thermal energy storage (TES) systems using phase change materials (PCM) as an energy storage medium offer several advantages; however, drawbacks appear when employing inorganic PCM, including low thermal conductivity and corrosion issues. In this study, a ZnAl6 metal alloy PCM was selected, and its potential for use in TES systems was explored. The thermophysical properties of the metal alloy were measured, including latent heat, melting point, solidification point, and degradation temperature. The metal alloy PCM was further evaluated for its compatibility with a stainless-steel tube by subjecting it to thermal cycling in a furnace, encompassing 1,000 cycles between its melting and solidification temperatures. FeAl phases were observed to form at the junction near the stainless-steel tube in contact with the PCM. Furthermore, the ZnAl6 eutectic composition remained stable even after 1000 thermal cycles., This research was funded by the German Ministry of Education and Research under grant no. 03SF0541 and the CETPartnership, the Clean Energy Transition Partnership is a transnational joint programming initiative to boost and accelerate the energy transition, building upon regional and national RDI funding programmes. The initiative is receiving funding from the European Union’s research and innovation programme “Horizon Europe” under grant agreement No 101069750. This paper is part of the PID2024-156068OB-C21 and RYC2023-044196-I, funded by MCIU/AEI/10.13039/501100011033 and FSE+. This work is also funded by Ministerio de Ciencia e Innovación y Universidades - Agencia Estatal de Investigación (MICIU/AEI /10.13039/501100011033) (RED2024-153629-T).Also, this work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Thermo-mechanical behaviour of steel , fibres reinforced refractory concrete for thermal energy storage applications

  • Alshouha, Abdelrahman
  • Castro Chicot, José Ramón
  • Zsembinszki, Gabriel
  • Mani Kala, Saranprabhu
  • Cabeza, Luisa F.
Based on a review and analysis of recent experimental studies on high-temperature concrete, this study investigates the performance of calcium aluminate concrete developed for sensible thermal energy storage applications. The primary aim of this research is to evaluate the effect of steel fibres on thermo-mechanical behaviour of both non-thermally treated and thermally treated calcium aluminate concrete. Two types of steel fibres were incorporated into the concrete mixtures, that is wavy low carbon steel fibres and wool stainless-steel fibres at varying dosages (0, 30, 50, and 75 kg/m³), to investigate their effect on physical, mechanical, and thermal performance of calcium aluminate concrete at high temperatures up to 700 °C. The results showed that both thermally treated and non-thermally treated concrete reinforced with wavy low carbon steel fibres experienced crack formation and subsequent degradation after 25 thermal cycles, leading to loss of compressive strength and matrix-fibres separation. In contrast, thermally treated concrete reinforced with wool stainless-steel fibres showed stability in retention of compressive strength after 25 thermal cycles. The influence of the steel fibres on the thermo-mechanical behaviour of refractory concrete allows the prediction of the failure mechanism of the composites., This project is part of the PID2024-156068OB-C21, funded by Ministerio de Ciencia e Innovación y Universidades - Agencia Estatal de Investigación MICIU/AEI/10.13039/501100011033 and FSE+, and Agencia Estatal de Investigación (MICIU/AEI /10.13039/501100011033) (RED2024-153629-T). This project was partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Dynamic corrosion testing of AISI 321 stainless steel in molten nitrate salts under realistic electric heater operating conditions

  • Pavón Moreno, M. Carmen
  • Al-Saaidi, Hussein Alawai Ibrahim
  • Prieto, Cristina
The durability and reliability of electric heaters operating in Power-to-Heat systems are strongly influenced by corrosion under real service conditions. Conventional corrosion assessments are typically based on static, isothermal tests, which do not reproduce the combined effects of molten salt flow, thermal gradients, and localized electrical heating. In this work, 321 stainless steel was evaluated in direct contact with molten nitrate salts using a comparative approach combining static tests and dynamic tests performed in a dedicated experimental loop. Dynamic experiments reproduced realistic electric heater operating conditions and were conducted for up to 3000 h. The results show that static tests promote extremely thin and stable oxide layers, whereas dynamic operation leads to thicker, multilayered oxides, cracking, and partial oxide removal. These findings demonstrate that static corrosion data are not representative of material behaviour under realistic operating conditions and highlight the necessity of dynamic corrosion testing for reliable material and lifetime prediction of molten-salt electric heaters., This work was funded by the Ministerio de Ciencia e Innovación de España (MICIU/AEI/ 10.13039/501100011033) and by ERDF/EU (Grant Agreement PID2024-156068OB-C22).