Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Graphene oxide as versatile charge-transfer interface for improved optoelectronic materials

  • Maser, Wolfgang K.
  • Benito, Ana M.
Talk delivered at the 2019 Nano Applications Workshop, 17th-18th july 2019, München (Germany)., Graphene oxide (GO) is a highly defective chemically modified form of graphene containing many different types of oxygen functional groups on its basal plane and edges. Their presence imparts hydrophilicity and allows for easy processing from water dispersions. These facts constitute the base for their use as platforms for the formation of functional hybrid optoelectronic materials, Here GO serves as highly versatile interface layer which can be employed in a controllable way to allow or block charge transfer in optoelectronic materials. 1,2,3,4, thus contributing to improved thin film device performance. In this presentation, we will focus on the interaction of GO with conjugated polymers emphasizing the dynamic charge-transfer across the interface layer in different configurations., EU Horizon 2020 Marie Sklodowska-Curie grant 642742 ("Enabling Excellence"), Spanish Ministry MINEICO (ENE2016-79282-C5-1-R and ENE2016-79282-C5-4-R), Gobierno de Aragón (Recognized Group DGA-T03-17R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Fotocatalizadores de TiO2 modificados con B. Aplicación en la oxidación fotocatalítica de propeno

  • Cano Casanova, Laura
  • Amorós-Pérez, A.
  • Ansón-Casaos, Alejandro
  • Lillo-Ródenas, Maria Ángeles
  • Román Martínez, María del Carmen
1 figura.-- Resumen del trabajo presentado en la reunión SECAT 2019, Reunión Bienal de la Sociedad Española de Catálisis, celebrada del 24 al 26 de junio de 2019, en Córdoba (España)., El dióxido de titanio es muy interesante como fotocatalizador en muchas reacciones de descomposición de contaminantes, principalmente debido a su excelente capacidad oxidativa, estabilidad química, bajo precio, inocuidad y biocompatibilidad. Sin embargo, aún sería deseable mejorar su eficiencia fotocatalítica mediante la disminución de la velocidad de recombinación de los pares electrón-hueco y la ampliación del intervalo de absorción hacia el espectro visible. Una de las opciones potenciales de mejora se centra en la modificación del TiO2 con boro, que en algunos casos podría dar lugar a una disminución de la energía del límite inferior de la banda de conducción del TiO2. En el presente trabajo se estudia dicha modificación empleando ácido bórico para introducir B en la composición del TiO2 preparado mediante el método sol-gel y se investiga el efecto de la cantidad de boro introducido y la temperatura de cristalización. Estos fotocatalizadores se han probado en la oxidación fotocatalítica de propeno en fase gas., Los autores agradecen la financiación económica de los proyectos PROMETEO/2018/076 (GV/Feder), RTI2018-095291-B-I00 y ENE2016-79282-C5-1-R (Ministerio de Ciencia, Innovación y Universidades), T03-17R (Gobierno de Aragón) y VIGROB-136 (UA)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Reducción de CO2 a CH4 usando materiales nanocarbonosos o monolitos recubiertos de alumina como soportes

  • Bustinza, Ainhoa
  • Roldán, Laura
  • García-Bordejé, José Enrique
1 figura.-- Resumen del póster presentado en la reunión SECAT 2019, Reunión Bienal de la Sociedad Española de Catálisis, celebrada del 24 al 26 de junio de 2019, en Córdoba (España)., Las energías renovables es una de las soluciones energéticas del futuro, debido a los riesgos medioambientales del uso de los combustibles fósiles y que sus reservas son limitadas. Sin embargo, la producción de energía a partir de fuentes renovables es intermitente, no coincidiendo normalmente la demanda y oferta ni en el tiempo, ni en el espacio. Por tanto, urge el desarrollo de soluciones para el almacenamiento y transporte de la energía renovable. Una solución es la conversión de la energía renovable en H2 mediante electrolisis. El principal problema es su almacenamiento y transporte puesto que el tiempo típico de descarga en las infraestructuras actuales es menos de 100 horas. Cuando se requiere almacenamiento por largo tiempo, una opción es la conversión de H2 con CO2 en gas natural sintético (CH4), que puede almacenarse en las actuales infraestructuras sin limitación. Además, el uso de CO2 como materia prima contribuye a cerrar el ciclo del carbono con el beneficio medioambiental que ello conlleva. La reacción de CO2 con H2 se descubrió hace más de un siglo y se conoce como reacción de Sabatier [1]. Diferentes metales de transición y nobles soportados en óxidos metálicos se han usado como soporte de catalizador en esta reacción. El uso de materiales carbonosos en esta reacción es muy escaso, incluso se ha descrito que los nanotubos de carbono (CNT) son inactivos para esta reacción, lo que se atribuye a la incapacidad de quimisorber CO2 por parte del soporte [2]. Para la aplicación industrial de esta tecnología es fundamental el diseño del reactor catalítico. La hidrogenación de CO2 para producir CH4 es altamente exotérmica (ΔHRo=-165 kJ/mol). Por tanto, es esencial una adecuada evacuación del calor generado para evitar puntos calientes que disminuyen el rendimiento a CH4 y la vida del catalizador. Para solucionarlo, se han usado diferentes tipos de reactores como lechos fluidizados, reactores multitubulares enfriados externamente o reactores en etapas con enfriamiento intermedio [3]. Más recientemente, se ha propuesto el recubrimiento de intercambiadores de calor con la fase catalíticamente activa. De manera que se integra la reacción y el enfriamiento. En este contexto, el recubrimiento catalítico de monolitos se ha propuesto como un modelo para el recubrimiento de intercambiadores de calor para la metanación de CO2 [4]. Además, los monolitos tienen baja perdida de carga lo que permitiría convertir el CO2 de gases de postcombustión, que se emiten a presión atmosférica, sin necesidad de represurizarlos. En este trabajo, hemos soportado nanopartículas de Ru en nanotubos de carbono (CNTs), nanofibras de carbono (CNFs) y nanofibras dopadas con nitrógeno (N-CNF). Los catalizadores con un 5% Ru soportados en CNF, N-CNF y CNT se han comparado a un catalizador comercial de 5% de Ru en alúmina (Ru/Al2O3). Para estudiar la relación entre la estructura y el comportamiento, los catalizadores se han caracterizado exhaustivamente por TEM y técnicas transitorias como desorción a temperatura programada (TPD) y reacción superficial a temperatura programada (TPSR). En una segunda parte, monolitos de cordierita se han recubierto con alúmina. Posteriormente, se ha utilizado como fase activa Ni, Ru y catalizadores bimetálicos de ambos optimizando la preparación del catalizador para la reacción de metanación de CO2., The authors are indebted to the funding of European Commission (FREECATS project, grant agreement No. 280658), Financial support from Spanish Ministry MINECO (project ENE2016-79282-C5-1-R), Gobierno de Aragón (Grupo Reconocido DGA T03_17R), and associated EU Regional Development Funds are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Reduced graphene oxide aerogels with tailored porosity as structured support for catalysis and electrocatalysis

  • Carrera Jiménez, Clara
  • Hernández-Ferrer, Javier
  • González Domínguez, José Miguel
  • Ansón-Casaos, Alejandro
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • García-Bordejé, José Enrique
1 figure.-- Abstract ot the poster presented at the NanoteC19 conference, International Conference on Carbon Nanosciene and Nanotechnology, 27th-30th august 2019, Zaragoza (Spain)., It is of fundamental and practical significance to translate the novel physical and chemical properties of individual graphene nanosheets into the macroscale by the assembly of graphene building blocks into macroscopic architectures with control over the porous structure and functionalities. 3D graphene aerogels have some interesting properties such as high specific surface area, open porous network for ion transport, flexibility, tough mechanical strength and conductive framework which lend them high potential for wide application fields such as supercapacitors, oil-water separations, sorbents, chemical reactors and solar cells [1]. One way to prepare 3D aerogels is starting from GO dispersions and its gelation under hydrothermal conditions [2]. Upon hydrothermal treatment, the functional groups of GO nanosheets are removed by reduction resulting in a decrease of hydrophilicity and loss of surface charges, which leads to the crosslinking of RGO nanosheets and ultimately to phase separation. Herein, we have varied the hydrothermal synthesis conditions (pH, time, and freezing drying methodology) to achieve a control over the orientation and size of the pores in graphene aerogels, preparing aerogels of unidirectional pores (Figure 1) [3]. Moreover, the pH of the initial solution has a profound impact on the reduction degree and morphology of the individual graphene nanoplatelets.[2] As a proof of concept, the materials have been tested as support for nanodiamonds metalfree catalyst for selective propane dehydrogenation[4] and as noble metal catalyst support for benzyl alcohol oxidation and electrocatalyst for water splitting (HER, OER) and ORR., MINECO (project ENE2016-79282-C5-1-R), Gobierno de Aragón (Grupo Reconocido DGA T03_17R), and associated EU Regional Development Funds, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

The surface chemistry of graphene oxide: Enhancing the performance of ZnO to GO photocatalysts

  • Víctor-Román, Sandra
  • García-Bordejé, José Enrique
  • González Domínguez, José Miguel
  • Ansón-Casaos, Alejandro
  • Silva, Adrián M. T.
  • Maser, Wolfgang K.
  • Benito, Ana M.
Abstract of the poster presented at the HeteroNanoCarb-2019 Conference, Advances and applications in carbon related nanomaterials: From pure to doped structures including heteroatom layers, 2019, December 09th -- 13th, Centro de Ciencias de Benasque Pedro Pascual, in Benasque (Aragon, Spain)., We demonstrate that the surface chemistry of graphene oxide Graphene oxide (GO) is of critical importance for the photocatalytic performance of semiconducting metal oxides such as TiO2 or ZnO. To this end we employ GO with distinct and well-defined oxidation degree for the preparation of ZnO-GO hybrid materials. We show that the surface chemistry of GO is key for facilitating favorable interface interactions. This results in a lowering of the alignment of energy levels at the ZnO-GO interface and enables the transfer of photo-excited electrons from ZnO to GO. The remaining positive charge at the valence band of ZnO then easily can promote oxidation reactions with the analyte and/or the solvent. In this way, GO reduces the recombination rate of the photogenerated electron-hole pair and enhances the photocatalytic activity of ZnO. We show that by solely controlling the oxidation degree of GO and by optimizing the loading fraction highly efficient ZnO-GO photocatalysts can be prepared. Most favorable conditions are achieved for intermediate oxidation degrees of GO. Optimized ZnO-GO hybrids thus reveal photocatalytic degradation of methylene blue at conversion rates of up to 80%, within times as short as 70 minutes at concentrations as low as 0.045 mg/mL, accompanied by a good recyclability behavior. The results are of general character and extendable to semiconducting metal oxides used in photocatalysis [1]., Spanish MINEICO (Project ENE2016-79282-C5-1-R, AEI/FEDER, UE and FPI Grant BES2014-068727) and Government of Aragon (DGA-T03-17R, FEDER, UE), is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Photoelectrochemistry: a tool for the study of charge transfer at interfaces with carbon nanostructured materials

  • Hernández-Ferrer, Javier
  • Istif, Emin
  • Ansón-Casaos, Alejandro
  • Santidrián, Ana
  • Víctor-Román, Sandra
  • Benito, Ana M.
  • Maser, Wolfgang K.
Work presented at the NanoteC19 conference, International Conference on Carbon Nanosciene and Nanotechnology, 27th-30th august 2019, Zaragoza (Spain)., Photoelectrochemistry of nanomaterials is commonly employed in fields related to energy and environmental applications, such as water splitting, solar cells or water remediation. It is a valuable technique for the direct evaluation of the performance for the desired application. In addition, it can be used for the study of intrinsic electronic properties of nanostructured of a great variety of semiconductor materials, such as conductive polymers or metal oxide nanoparticles. It is also a highly valuable implement to assess charge and/or energy transfer phenomena between the mentioned semiconductors and carbon nanomaterials (GO, CNTs), unveiling their role as charge acceptors/donors, blockers/transporters, sensitizers/conditioners, or even as electroactive materials for themselves, thus allowing the tuning of optoelectronic properties of composite materials. This versatility makes photoelectrochemistry a key tool in the field of carbon nanoscience and nanotechnology [1-4]., MINECO (project ENE2016-79282-C5-1-R), European Union (H2020-MSCA-ITN-2014-ETN 642742), Gobierno de Aragón (Grupo Reconocido DGA T03_17R), and associated EU Regional Development Funds., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Charge transfer in nanostructured composite materials: a photoelectrochemical approach

  • Hernández-Ferrer, Javier
  • Istif, Emin
  • Ansón-Casaos, Alejandro
  • Santidrián, Ana
  • Benito, Ana M.
  • Maser, Wolfgang K.
1 Figure.-- Abstract of the work presented at "Current Trends in Electrochemistry", 41st Meeting of the Electrochemisty Group of the Spanish Royal Society of Chemistry, 1st French‐Spanish Atelier/Workshop on Electrochemistry, 6 - 9 July 2021, Paris (France)., Photoelectrochemical techniques are accurate for the study of intrinsic electronic properties of a great variety of nanostructured semiconductor materials, such as conductive polymers, carbon nanomaterials (GO, CNTs, CDs) or metal oxide nanoparticles. It is also a highly valuable implement to assess charge and/or energy transfer phenomena between the mentioned semiconductors unveiling their role as charge acceptors/donors, blockers/transporters, sensitizers/conditioners, or even as photoelectroactive materials for themselves, thus allowing the tuning of optoelectronic properties of composite materials, for their future application in fields related to energy and environment, such as water splitting, electronics, solar cells or water remediation. This versatility makes photoelectrochemistry a key tool in the field of nanoscience and nanotechnology., MINECO and AEI/FEDER/UE (project ENE2016-79282-C5-1-R), European Union (H2020-MSCAITN- 2014-ETN 642742), Gobierno de Aragón (Grupo Reconocido DGA T03_17R, FEDER/UE)., Peer reviewed