Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 19
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Circuit reliability prediction: Challenges and solutions for the device time-dependent variability characterization roadblock

  • Nafria, M.
  • Díaz-Fortuny, Javier
  • Saraza-Canflanca, P.
  • Martín-Martínez, Javier
  • Roca, Elisenda
  • Castro-López, Rafael
  • Rodríguez, Rosana
  • Martín-Lloret, P.
  • Toro-Frias, A.
  • Mateo, D.
  • Barajas, Enrique
  • Aragones, X.
  • Fernández, Francisco V.
Copyright IEEE, The characterization of the MOSFET Time-Dependent Variability (TDV) can be a showstopper for reliability-Aware circuit design in advanced CMOS nodes. In this work, a complete MOSFET characterization flow is presented, in the context of a physics-based TDV compact model, that addresses the main TDV characterization challenges for accurate circuit reliability prediction at design time. The pillars of this approach are described and illustrated through examples., This work was supported by the VIGILANT Project (PID2019-103869RB / AEI / 10.13039/501100011033) and the TEC2016-75151-C3-R Project (AEI/FEDER, UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

An IC Array for the Statistical Characterization of Time-Dependent Variability of Basic Circuit Blocks

  • Martin-Lloret, P.
  • Núñez, Juan
  • Roca, Elisenda
  • Castro-López, Rafael
  • Martín-Martínez, Javier
  • Rodríguez, Rosana
  • Nafria, M.
  • Fernández, Francisco V.
Talk delivered in International Conference on Synthesis, Modeling, Analysis and Simulation Methods, and Applications to Circuit Design (SMACD) in Lausanne (Switzerland), 15-18 July 2019. © 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper presents an integrated circuit (IC) array whose purpose is to observe, quantify and characterize the impact of time-dependent variability effects, like aging, in several widely used digital and analog circuit blocks. With the increasing interest that this kind of mechanism has attracted in the last years, for its potential impact in the reliability of ultra-scaled integrated circuits, it is only relevant that appropriate measures are taken to find out how it can be included (and thus mitigated) in the design process of such integrated circuits. And, while substantial literature exists that covers the device level, time-dependent variability at circuit level has not been as equally studied. This work complements our previous efforts in providing a holistic approach to Reliability-Aware Design: from statistical characterization and modeling at device-level, to simulation, and into optimization-based design with reliability considerations, the array presented here provides one more step towards a thorough and accurate understanding of how time-dependent variability works at the circuit level., This work was supported in part by the TEC2016-75151-C3-R Project (funded by the Spanish MINECO and ERDF)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

TiDeVa: A Toolbox for the Automated and Robust Analysis of Time-Dependent Variability at Transistor Level

  • Saraza-Canflanca, P.
  • Díaz-Fortuny, Javier
  • Castro-López, Rafael
  • Roca, Elisenda
  • Martín-Martínez, Javier
  • Rodríguez, Rosana
  • Nafria, M.
  • Fernández, Francisco V.
Talk delivered in International Conference on Synthesis, Modeling, Analysis and Simulation Methods, and Applications to Circuit Design (SMACD) in Lausanne (Switzerland), 15-18 July 2019. © 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Time-Dependent Variability has attracted increasing interest in the last years. In particular, time-dependent phenomena such as Bias Temperature Instability, Hot Carrier Injection and Random Telegraph Noise can have a large impact on circuit reliability, and must be therefore characterized and modeled. For technologies in the nanometer range, these phenomena reveal a stochastic behavior and must be characterized in a massive manner, with enormous amounts of data being generated in each measurement. In this work, a novel tool with a user-friendly interface, which allows the robust and fully-automated parameter extraction for RTN, BTI and HCI experiments, is presented., This work has been supported in part by the TEC2016-75151-C3-R Project (funded by the Spanish MINECO and ERDF) and by the P12-TIC-1481 Project (funded by Junta de Andalucía)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Synthesis of mm-Wave circuits using-EM-simulated passive structure libraries

  • Passos, Fábio
  • Roca, Elisenda
  • Castro-López, Rafael
  • Horta, N.
  • Fernández, Francisco V.
Talk delivered in International Conference on Synthesis, Modeling, Analysis and Simulation Methods, and Applications to Circuit Design (SMACD) in Lausanne (Switzerland), 15-18 July 2019. © 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Millimeter-wave circuit design is extremely complex and time-consuming. One of the reasons is the dependence on electromagnetic simulators used to accurately predict the performance of the high amount of passive structures that compose such circuits. Also, achieving optimal performances is not trivial in the millimeter-wave regime. Although synthesis methodologies can aid the designer to achieve optimal circuit performances, the usage of electromagnetic simulators is prohibitive in such methodologies due to efficiency issues. In this work, a new synthesis methodology is presented where the accuracy of electromagnetic simulations can be included without losing efficiency., This work is funded by FCT/MEC through national funds and when applicable co-funded by FEDER – PT2020 partnership agreement under the project UID/EEA/50008/2019 and by the TEC2016-75151-C3-3-R Project (funded by the Spanish Ministry of Science, Innovation and Universities and ERDF)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Experimental Characterization of Time-Dependent Variability in Ring Oscillators

  • Núñez, Juan
  • Roca, Elisenda
  • Castro-López, Rafael
  • Martín-Martínez, Javier
  • Rodríguez, Rosana
  • Nafria, M.
  • Fernández, Francisco V.
Talk delivered in International Conference on Synthesis, Modeling, Analysis and Simulation Methods, and Applications to Circuit Design (SMACD) in Lausanne (Switzerland), 15-18 July 2019. © 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Reliability in CMOS-based integrated circuits has always been a critical concern. In today's ultra-scaled technologies, a time-varying kind of variability has raised that, on top of the well-known time-zero variability, threatens to shorten the lifetime of integrated circuits, both analog and digital. Effects like Bias Temperature Instability and Hot Carriers Injection need to be studied, characterized and modeled to include, and, thus, mitigate, their impact in the design of CMOS integrated circuits. This paper presents an array-based integrated circuit whose purpose is precisely that: to observe, quantify and characterize the impact of time-dependent variability effects in a specific kind of circuits: Ring Oscillators., This work has been funded by Ministerio de Economía y Competitividad del Gobierno de España with support from ERDF (Projects TEC2016-75151-C3-R, TEC2017-87052-P)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

A New Time Efficient Methodology for the Massive Characterization of RTN in CMOS Devices

  • Pedreira, G.
  • Martín-Martínez, Javier
  • Díaz-Fortuny, Javier
  • Saraza-Canflanca, P.
  • Rodríguez, Rosana
  • Castro-López, Rafael
  • Roca, Elisenda
  • Fernández, Francisco V.
  • Nafria, M.
Talk delivered at the IEEE International Reliability Physics Symposium (IRPS) in Monterrey, California (USA), March 31– April 4, 2019. © 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., In this work a new method to characterize Random Telegraph Noise (RTN) in a large number of devices is presented. The method is applied to the RTN characterization of nearly 800 pMOS transistors and compared with conventional approaches. The results presented here show that the new method, which requires the measurement of each device only in two instants, can hugely reduce the measurement time needed for the statistical characterization of RTN., This work was supported by Spanish AEI and ERDF under Project TEC2016-75151-C3-R. The work of G. Pedreira, J. Diaz-Fortuny and P. Saraza-Canflanca was supported by AEI under grants BES-2017-081462, BES-2014-067855 and BES- 2017-080160 respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Generation of Lifetime-Aware Pareto-Optimal Fronts Using a Stochastic Reliability Simulator

  • Toro-Frias, A.
  • Saraza-Canflanca, P.
  • Passos, Fábio
  • Martin-Lloret, P.
  • Castro-López, Rafael
  • Roca, Elisenda
  • Martín-Martínez, Javier
  • Rodríguez, Rosana
  • Nafria, M.
  • Fernández, Francisco V.
Talk delivered at the 2019 Design, Automation & Test in Europe Conference & Exhibition (DATE) in Florence (Italy), 25 – 29 March 2019. © 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Process variability and time-dependent variability have become major concerns in deeply-scaled technologies. Two of the most important time-dependent variability phenomena are Bias Temperature Instability (BTI) and Hot-Carrier Injection (HCI), which can critically shorten the lifetime of circuits. Both BTI and HCI reveal a discrete and stochastic behavior in the nanometer scale, and, while process variability has been extensively treated, there is a lack of design methodologies that address the joint impact of these two phenomena on circuits. In this work, an automated and time-efficient design methodology that takes into account both process and time-dependent variability is presented. This methodology is based on the utilization of lifetime-aware Pareto-Optimal Fronts (POFs). The POFs are generated with a multi-objective optimization algorithm linked to a stochastic simulator. Both the optimization algorithm and the simulator have been specifically tailored to reduce the computational cost of the accurate evaluation of the impact on a circuit of both sources of variability., This work has been supported by the TEC2016-75151-C3-R Project (funded by the Spanish MINECO and ERDF). Pablo Sarazá Canflanca acknowledges MINECO for supporting his research activity through the predoctoral grant BES-2017-080160., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

New method for the automated massive characterization of Bias Temperature Instability in CMOS transistors

  • Saraza-Canflanca, P.
  • Díaz-Fortuny, Javier
  • Castro-López, Rafael
  • Roca, Elisenda
  • Martín-Martínez, Javier
  • Rodríguez, Rosana
  • Nafria, M.
  • Fernández, Francisco V.
Talk delivered at the 2019 Design, Automation & Test in Europe Conference & Exhibition (DATE), in Florence (Italy), 25 – 29 March 2019. © 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Bias Temperature Instability has become a critical issue for circuit reliability. This phenomenon has been found to have a stochastic and discrete nature in nanometer-scale CMOS technologies. To account for this random nature, massive experimental characterization is necessary so that the extracted model parameters are accurate enough. However, there is a lack of automated analysis tools for the extraction of the BTI parameters from the extensive amount of generated data in those massive characterization tests. In this paper, a novel algorithm that allows the precise and fully automated parameter extraction from experimental BTI recovery current traces is presented. This algorithm is based on the Maximum Likelihood Estimation principles, and is able to extract, in a robust and exact manner, the threshold voltage shifts and emission times associated to oxide trap emissions during BTI recovery, required to properly model the phenomenon., This work has been supported by the TEC2016-75151-C3-R Projects (funded by the Spanish MINECO and ERDF). Javier Díaz Fortuny acknowledges MINECO for supporting his research activity through the FPI grant BES-2014-067855. Pablo Sarazá Canflanca acknowledges MINECO for supporting his research activity through the predoctoral grant BES-2017-080160., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Improving the reliability of SRAM-based PUFs in the presence of aging

  • Saraza-Canflanca, P.
  • Carrasco-Lopez, H.
  • Brox, Piedad
  • Castro-López, Rafael
  • Roca, Elisenda
  • Fernández, Francisco V.
Talk delivered at the 2020 conference 15th Design & Technology of Integrated Systems in Nanoscale Era (DTIS), Marrakesh (Morocco), April 1-3, 2020. © 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The utilization of power-up values in SRAM cells for the generation of PUF responses has been widely studied. It is important that the cells used for this purpose are stable, i.e., the cells must have a strong tendency towards one of the two possible values ('0' or '1'). Some methods have been presented that aim at increasing the reliability of this type of PUFs by selecting the strongest cells among a set of them. However, they feature some drawbacks, either in terms of their practical feasibility or of their actual effectiveness selecting the strongest cells in different scenarios. In this work, the experimental results obtained for a new method to classify the cells according to their strength are presented and discussed. The technique overcomes some of the drawbacks that the previous methods present. In particular, it is experimentally demonstrated that the technique presented in this work outstands in selecting SRAM cells that are very robust against circuit degradation, which translates into the construction of reliable SRAM-based PUFs., This work was supported by the TEC2016-75151-C3-R Project (funded by the Spanish MINECO and ERDF). Pablo Sarazá Canflanca acknowledges MINECO for supporting his research activity through the predoctoral grant BES-2017-080160., Peer reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Modem gain-cell memories in advanced technologies

  • Amat Bertran, Esteve
  • Canal Corretger, Ramon
  • Rubio Sola, Jose Antonio
With the advent of the slowdown in DRAM capacitor scaling [1] and the increased reliability problems of traditional 6T SRAM memories [2], industry and academia have looked for alternative memory cells. Among those, gain- cells have attracted significant attention due to their smaller size (compared to SRAM) and non-destructive read operation (compared to DRAM) as well as considerable low power and reasonable robustness. This paper first summarizes the available evidences of SRAM and eDRAM in commercial and test chips. Then, it analyzes the performance, reliability and scaling of eDRAM gain-cells in 10 and 7 nm FinFET technology; as well as above and below VT (i.e. sub-threshold)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Variability-tolerant memristor-based ratioed logic in crossbar array

  • Escudero López, Manuel
  • Rubio Sola, Jose Antonio
  • Moll Echeto, Francisco de Borja
  • Vourkas, Ioannis
The final publication is available at ACM via http://dx.doi.org/10.1145/3232195.3232213, The advent of the first TiO2-based memristor in 2008 revived the scientific interest both from academia and industry for this de- vice technology, with several emerging applications including that of logic circuits. Several memristive logic families have been pro- posed, each with different attributes, in the current quest for energy- efficient computing systems of the future. However, limited en- durance of memristor devices and variations (both cycle-to-cycle and device-to-device) are important parameters to be considered in the evaluation of such logic families. In this work we build upon an accurate physics-based model of a bipolar metal-oxide resistive RAM device (supporting parasitics of the device structure and va- riability of switching voltages and resistance states) and use it to show how performance of memristor-based logic circuits can de degraded owing to both variability and state-drift impact. Based on previous work on CMOS-like memristive logic circuits, we propose a memristive ratioed logic scheme, which is crossbar-compatible, i.e. suitable for in-/near-memory computing, and tolerant to device variability, while also it does not affect the device endurance since computations do not involve switching the memristor states. As a figure of merit, we compare such new logic scheme with MAGIC, focusing on the universal NOR logic gate., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

An on-line test strategy and analysis for a 1T1R crossbar memory

  • Escudero, Manel
  • Moll Echeto, Francisco de Borja
  • Rubio Sola, Jose Antonio
  • Vourkas, Ioannis
© 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Memristors are emerging devices known by their nonvolability, compatibility with CMOS processes and high density in circuits density in circuits mostly owing to the crossbar nanoarchitecture. One of their most notable applications is in the memory system field. Despite their promising characteristics and the advancements in this emerging technology, variability and reliability are still principal issues for memristors. For these reasons, exploring techniques that check the integrity of circuits is of primary importance. Therefore, this paper proposes a method to perform an on-line test capable to detect a single failure inside the memory crossbar array., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Coupled physarum-inspired memristor oscillators for neuron-like operations

  • Ntinas, Vasileios
  • Vourkas, Ioannis
  • Sirakoulis, Georgios Ch.
  • Adamatzky, Andrew
  • Rubio Sola, Jose Antonio
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Unconventional computing has been studied intensively, even after the appearance of CMOS technology. Currently, it has returned to the spotlight because CMOS is about to reach its physical limits, given that the constant demand for more computational power requires for novel unconventional computing solutions. In this area, the oscillatory internal motion mechanism of slime mould, namely Physarum Polycephalum, could serve as an alternative concept for the design and development of electronic circuits that exploit the memristive dynamics and simple LC contours to deliver solutions for computationally hard to be solved problems. In this direction, this work presents how bio-inspired memristive LC oscillators with a coupling capacitor can be synchronized to perform the functionalities of a biological neuron, also able to execute more complex computations, aiming to model biological neural systems much more advanced than the neuron-less slime mould biological organism. This work proposes a connection between the function mechanism of a simple biological organism and that of complex biological systems, made in a plausible and sufficient manner, towards unconventional computation with memristors., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

On the variability-aware design of memristor-based logic circuits

  • Escudero López, Manuel
  • Vourkas, Ioannis
  • Rubio Sola, Jose Antonio
  • Moll Echeto, Francisco de Borja
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Ever since the advent of the first TiO 2 -based memristor and the respective linear model published by Hewlett-Packard Labs, several behavioral models of memristors have been published. Such models capture the fundamental characteristics of resistive switching behavior through simple equations and rules, so they received a lot of attention and contributed significantly to the fast progress of research in this new and emerging device technology field. However, while this technology is maturing, accurate physics-based models are being developed, which go deeper into the device dynamics and capture more details than what just would be the fundamentals: i.e. parasitics of the device structure, variability of threshold voltages and resistance states, temperature dependency, dynamic current fluctuations, etc. In this work we build upon such a physics-based model of a bipolar metal-oxide resistive RAM device, showing how to take into account device variability and its significance in evaluation of processing circuits. With the Cadence Virtuoso suite, we focus on a family of memristive logic gate implementations showing that read & write errors can emerge due to both variability and state-drift impact, features rarely seen so far in results shown in other relevant published works., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Memristive cellular automata for modeling of epileptic brain activity

  • Karamani, Rafallia
  • Fyrigos, Iosif
  • Ntinas, Vasileios
  • Vourkas, Ioannis
  • Sirakoulis, Georgios Ch.
  • Rubio Sola, Jose Antonio
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Cellular Automata (CA) is a nature-inspired and widespread computational model which is based on the collective and emergent parallel computing capability of units (cells) locally interconnected in an abstract brain-like structure. Each such unit, referred as CA cell, performs simplistic computations/processes. However, a network of such identical cells can exhibit nonlinear behavior and be used to model highly complex physical phenomena and processes and to solve problems that are highly complicated for conventional computers. Brain activity has always been considered one of the most complex physical processes and its modeling is of utter importance. This work combines the CA parallel computing capability with the nonlinear dynamics of the memristor, aiming to model brain activity during the epileptic seizures caused by the spreading of pathological dynamics from focal to healthy brain regions. A CA-based confrontation extended to include long-range interactions, combined with the recent notion of memristive electronics, is thus proposed as a modern and promising parallel approach to modeling of such complex physical phenomena. Simulation results show the efficiency of the proposed design and the appropriate reproduction of the spreading of an epileptic seizure., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

A pragmatic gaze on stochastic resonance based variability tolerant memristance

  • Ntinas, Vasileios
  • Rubio Sola, Jose Antonio
  • Sirakoulis, Georgios Ch.
  • Cotofana, Sorin
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Stochastic Resonance (SR) is a nonlinear system specific phenomenon, which was demonstrated to lead to system unexpected (counter-intuitive) performance improvements under certain noise conditions. Memristor, on the other hand, is a fundamentally nonlinear circuit element, thus susceptible to benefit from SR, which recently came in the spotlight of the emerging technologies potential candidates. However, at this time, the variability exhibited by manufactured memristor devices within the same array constitutes the main hurdle in the road towards the commercialisation of memristor-based memories and/or computing units. Thus, in this paper, memristor SR effects are explored, assuming various memristor models, and SR-based memristance range enhancement, tolerant to device-to-device variability, is demonstrated. Our experiments reveal that SR can induce significant R MAX /R MIN ratio increase under up to 60% variability, getting as high as 3.4× for 29 dBm noise power., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Body bias generators for ultra low voltage circuits in FDSOI technology

  • Justo, Diego
  • Nunes Cavalheiro, David
  • Moll Echeto, Francisco de Borja
Electronic circuits powered at ultra low voltages (300 mV and below) are desirable for their low energy and power consumption. However, the performance at such low power voltage is severely degraded. FDSOI technology, with its large range of body bias voltages can counteract the performance loss by applying forward body bias to the circuit. Charge pump circuits can be used to generate positive and negative body bias voltages integrated on the chip. This paper studies the main challenges in the design of such circuits operating at 300 mV to reach body bias voltages of more than 1 V., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Analysis of body bias and RTN-induced frequency shift of low voltage ring oscillators in FDSOI technology

  • Barajas Ojeda, Enrique
  • Aragonès Cervera, Xavier
  • Mateo Peña, Diego
  • Moll Echeto, Francisco de Borja
  • Rubio Sola, Jose Antonio
  • Martin Martínez, Javier
  • Rodríguez Martínez, Rosana
  • Porti Pujal, Marc
  • Nafría Maqueda, Montserrat
  • Castro López, Rafael
  • Roca Moreno, Elisenda
  • Fernandez, Francisco V.
Electronic circuits powered at ultra low voltages (500 mV and below) are desirable for their low energy and power consumption. However, RTN (Random Telegraph Noise)-induced threshold voltage variations become very significant at such supply voltages. This paper evaluates the impact of RTN on additional jitter in a ring oscillator. Since FDSOI allows a large range of body bias voltages, this work studies how body biasing affects the oscillation frequency but also the jitter effects. The impact of RTN in NMOS and PMOS devices on frequency as well as the levels of supplementary jitter introduced by RTN are evaluated and compared with classical device noise., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Aging in CMOS RF linear power amplifiers: experimental comparison and modeling

  • Aragonès Cervera, Xavier
  • Mateo Peña, Diego
  • Barajas Ojeda, Enrique
  • Crespo-Yepes, A.
  • Rodríguez Martínez, Rosana
  • Martin Martínez, Javier
  • Nafría Maqueda, Montserrat
This paper characterizes experimentally the aging degradation experienced by two different 2.45 GHz power amplifier circuits of similar performance, implemented in a 65 nm CMOS technology. Results demonstrate the importance of the topology selection in order to guarantee robustness against aging effects, and thus the need to predict MOS parameter degradation during the design phase, accounting for the actual DC and RF operation conditions. For that purpose, we propose a semi-empirical compact model that, based on the RMS equivalent voltages at the transistor terminals during circuit operation, can provide an estimation of the aging degradation., Peer Reviewed, Postprint (published version)