Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 37
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Epitaxial Ferroelectric HfO2 Films: Growth, Properties, and Devices

  • Fina, Ignasi
  • Sánchez Barrera, Florencio
About ten years after ferroelectricity was first reported in doped HfO2 polycrystalline films, there is tremendous interest in this material and ferroelectric oxides are once again in the spotlight of the memories industry. Great efforts are being made to understand and control ferroelectric properties. Epitaxial films, which have fewer defects and a more controlled microstructure than polycrystalline films, can be very useful for this purpose. Epitaxial films of ferroelectric HfO2 have been much less investigated, but after the first report in 2015 significant progress has been achieved. This review summarizes and discusses the main advances on epitaxial HfO2, considering growth, study of structural and ferroelectric properties, identification of the ferroelectric phase, and fabrication of devices. We hope this review will help to researchers investigating epitaxial HfO2. It can also help extend the interest of the ferroelectric HfO2 community, now basically focused on polycrystalline samples, to epitaxial films., Financial support from the Spanish Ministry of Science and Innovation, through the Severo Ochoa FUNFUTURE (CEX2019-000917-S), MAT2017-85232-R (AEI/FEDER, EU), PID2020-112548RB-I00 (AEI/FEDER, EU), and PID2019-107727RB-I00 (AEI/FEDER, EU) projects, from CSIC through the i-LINK (LINKA20338) program, and from Generalitat de Catalunya (2017 SGR 1377) is acknowledged. Project support was also provided by a 2020 Leonardo Grant for Researchers and Cultural Creators, BBVA Foundation. I.F. acknowledges Ramón y Cajal Contract RYC-2017-22531., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Interaction between SARS-CoV-2 spike glycoprotein and human skin models: a molecular dynamics study

  • Domingo, Marc
  • Faraudo, Jordi
The possibility of contamination of human skin by infectious virions plays an important role in indirect transmission of respiratory viruses but little is known about the fundamental physico-chemical aspects of the virus-skin interactions. In the case of coronaviruses, the interaction with surfaces (including the skin surface) is mediated by their large glycoprotein spikes that protrude from (and cover) the viral envelope. Here, we perform all atomic simulations between the SARS-CoV-2 spike glycoprotein and human skin models. We consider an "oily" skin covered by sebum and a "clean" skin exposing the stratum corneum. The simulations show that the spike tries to maximize the contacts with stratum corneum lipids, particularly ceramides, with substantial hydrogen bonding. In the case of "oily" skin, the spike is able to retain its structure, orientation and hydration over sebum with little interaction with sebum components. Comparison of these results with our previous simulations of the interaction of SARS-CoV-2 spike with hydrophilic and hydrophobic solid surfaces, suggests that the"soft" or "hard" nature of the surface plays an essential role in the interaction of the spike protein with materials., This work was supported by the Spanish Ministry of Science and Innovation through Grant No. RTI2018-096273-B-I00, the “Severo Ochoa” Grant No.CEX2019-000917-S for Centres of Excellence in R&D awarded to ICMAB and the FPI grant PRE2020- 093689 awarded to M.D. We thank the CESGA supercomputing center for computer time and technical support at the Finisterrae supercomputer. M.D. is enrolled in the Material Sciences PhD program of the Universitat Autonoma de Barcelona., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Implications of the BATTERY 2030+ AI-Assisted Toolkit on Future Low-TRL Battery Discoveries and Chemistries

  • Bhowmik, Arghya
  • Berecibar, Maitane
  • Casas Cabanas, Montse
  • Csanyi, Gabor
  • Dominko, Robert
  • Hermansson, Kersti
  • Palacín, M. Rosa
  • Stein, Helge S.
  • Vegge, Tejs
BATTERY 2030+ targets the development of a chemistry neutral platform for accelerating the development of new sustainable high-performance batteries. Here, a description is given of how the AI-assisted toolkits and methodologies developed in BATTERY 2030+ can be transferred and applied to representative examples of future battery chemistries, materials, and concepts. This perspective highlights some of the main scientific and technological challenges facing emerging low-technology readiness level (TRL) battery chemistries and concepts, and specifically how the AI-assisted toolkit developed within BIG-MAP and other BATTERY 2030+ projects can be applied to resolve these. The methodological perspectives and challenges in areas like predictive long time- and length-scale simulations of multi-species systems, dynamic processes at battery interfaces, deep learned multi-scaling and explainable AI, as well as AI-assisted materials characterization, self-driving labs, closed-loop optimization, and AI for advanced sensing and self-healing are introduced. A description is given of tools and modules can be transferred to be applied to a select set of emerging low-TRL battery chemistries and concepts covering multivalent anodes, metal-sulfur/oxygen systems, non-crystalline, nano-structured and disordered systems, organic battery materials, and bulk vs. interface-limited batteries., The authors acknowledge the European Union's Horizon 2020 research and innovation program under grant agreements no. 957189 (BIG-MAP) and no. 957213 (BATTERY 2030+). K.H. acknowledges the Swedish Research Council (Vetenskapsrådet) and the Swedish national Strategic e-Science programme eSSENCE. R.D. acknowledges the financial support from the Slovenian Research Agency (research core funding P2-0393 and Project N2-0214). H.S.S. acknowledges funding from Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) under Germany's Excellence Strategy—EXC 2154—Project number 390874152. M.C.-C. acknowledges the Spanish Ministerio de Ciencia, Innovación y Universidades (Project reference number: PID2019-107106RB-C33). M.R.P. acknowledges the Spanish Agencia Estatal de Investigación Severo Ochoa Programme for Centres of Excellence in R&D (CEX2019-000917-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Research and development of welding methods and welding mechanism of high-entropy alloys: A review

  • Zhang, Yali
  • Jiang, Xiaosong
  • Fang, Yan
  • Fang, Yongjian
  • Liu, Bing
  • Sun, Hongliang
  • Shao, Zhenyi
  • Song, Tingfeng
In this paper, the solid-state welding and fusion welding of high-entropy alloys (HEAs) were reviewed. For solid-state welding of HEAs, the influence of microstructure change and welding parameters on properties of welded joints were discussed. For fusion welding of HEAs, the application of laser welding, electron beam welding and gas tungsten arc welding was analyzed. Then relevant welding mechanisms, solidification behavior of grains, and phase formation in fusion welding of HEAs were discussed. The methods optimizing properties and microstructure of welded joints were discussed, including the adjustment of parameters, usage of pre-welding heat treatment and post-welding heat treatment, as well as the application of metallic interlayers in dissimilar welding of HEAs. The application of numerical simulation in HEAs welding could facilitate the optimization of experimental parameters. In addition, HEAs have been applied as coatings to improve the properties and life of materials based on welding methods, and the application of HEAs fillers in welding was also achieved. In the future, molecular dynamics simulation can be applied to analyze the atomic diffusion and stress distribution in HEAs welding, and there are still many aspects that need to be explored in the field of HEAs welding., This work was supported by Key Laboratory of Infrared Imaging Materials and Detectors, Shanghai Institute of Technical Physics, Chinese Academy of Sciences (No. IIMDKFJJ-19-08) and China Postdoctoral Science Foundation (No. 2015M570794, No. 2018T110993)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Interplay of domain structure and phase transitions: theory, experiment and functionality

  • Grünebohm, Anna
  • Marathe, Madhura
  • Khachaturyan, Ruben
  • Schiedung, Raphael
  • Lupascu, Doru C.
  • Shvartsman, Vladimir V.
Domain walls and phase boundaries are fundamental ingredients of ferroelectrics and strongly influence their functional properties. Although both interfaces have been studied for decades, often only a phenomenological macroscopic understanding has been established. The recent developments in experiments and theory allow to address the relevant time and length scales and revisit nucleation, phase propagation and the coupling of domains and phase transitions. This review attempts to specify regularities of domain formation and evolution at ferroelectric transitions and give an overview on unusual polar topological structures that appear as transient states and at the nanoscale. We survey the benefits, validity, and limitations of experimental tools as well as simulation methods to study phase and domain interfaces. We focus on the recent success of these tools in joint scale-bridging studies to solve long lasting puzzles in the field and give an outlook on recent trends in superlattices., Financial support has been guaranteed by the Deutsche Forschungsgemeinschaft via Emmy Noether group GR 4792/2. MM would like to acknowledge the funding from the European Union's Horizon 2020 research and innovation programme under Marie Skłodowska-Curie Grant Agreement No. 665919. MM would like to thank Konstantin Shapovalov for fruitful discussions., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Computer Simulation of the interaction between SARS-CoV-2 Spike Protein and the Surface of Coinage Metals

  • Sahihi, Mehdi
  • Faraudo, Jordi
Coinage metals like silver, gold and copper are historically known as materials with anti-infective properties; but the mechanism behind these properties is not yet clear, and several features seem to be effective in this regard. Here, we used an all-atom molecular dynamics simulation method to investigate the interaction of up and down conformations of the S1 subunit of the SARS-CoV-2 spike protein with the (100) surface of Au, Ag and Cu. Our results revealed that spike protein is adsorbed onto the surface of these metals, being the Cu-metal with the highest interaction with the spike and Au, the metal which induces bigger structural changes in the spike. In our simulations, we considered the spike protein in both its up and down conformations. We found that the affinity of the metals for the up-conformation was higher than their affinity for the down conformation of the spike protein due to the interactions with the receptor binding domain that is exposed in the up conformation but hidden in the down conformation. Comparing the present results for metals with those obtained in our previous MD simulations with other materials (cellulose, graphite, and human skin models), we see that Au induces the highest structural change in the spike, larger than those obtained in our previous studies., This work was supported by Grant PID2021-124297NB-C33 funded by MCIN/AEI/ 10.13039/501100011033 and, as appropriate, by “ERDF A way of making Europe”, by the “European Union” or by the “European Union NextGenerationEU/PRTR” and by the “Severo Ochoa” Program for Centers of Excellence in R&D (CEX2019-000917-S) awarded to ICMAB. We thank the Spanish national supercomputing network (BSC-RES) for the award of computer time at the Minotauro supercomputer. M Sahihi is supported by the European Union Horizon 2020 research and innovation programme under Marie Sklodowska-Curie Action Individual Fellowship Grant Agreement No. 101026158., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Oscillations: Nonlinear theory and applications in AFM

  • Santos, Sergio
  • Olukan, Tuza Adeyemi
  • Elsherbiny, Lamia
  • Verdaguer, Albert
  • Chiesa, Matteo
The theory of oscillations can be studied from a mathematical point of view in terms of differential equations. The differential equation is written and then the solution or solutions worked out and mathematically analysed. Provided physical, economic, social, or other phenomena can be modelled in terms of equivalent differential equations, the solutions and results are applicable to all phenomena all the same. On the other hand, it is sometimes easier to learn a topic by having an experimental topic in mind. It is otherwise maybe surprising that a large body of phenomena in many fields of application will be easily understood if the equations are understood for a given case. The experimental analysis that forms the basis of this book is cantilever dynamics in dynamic atomic force microscopy (AFM). In a nutshell, the motion of the cantilever in dynamic AFM can be approximated to a perturbed driven oscillator. The generality of the analysis presented here can be confirmed by noting that much of what is covered in this book, particularly when dealing with the linear equation in section 1, is similar to what is covered in generic expositions such as that by Tipler and Mosca1 or the Feynman’s lectures on physics2 . Maybe the main advantage of this exposition is that the linear and nonlinear theories of oscillators, particularly phenomena that can be reduced to the analysis of a point-mass on a spring, are discussed in detail and differences in terminology that could lead to doubt, clarified. This means that this book can be used as a textbook to teach oscillation theory with a focus on applications. This is possible because oscillations are present generally in physics, engineering, biology, economics, sociology and so on. In summary, all phenomena dealing with oscillations can be reduced, to a first approximation, to a restoring parameter, i.e., force in mechanics, following Hooke’s law. Since the AFM field is a niche in science, the general theory of oscillation does not cover the particularities of the field. This book covers such particularities. Thus, the book can be used as an introduction to dynamic AFM and oscillation theory that covers the terminology required to understand dynamic AFM. On the other hand, the ubiquity and generality of oscillation theory ensures that the book can also be used as a general introduction to oscillation theory at an undergraduate level. There is also advanced material, particularly in the second section of the book where nonlinearities are covered. For the sake of transnationality, standard terminology is employed throughout when possible, especially in the first section (Book 1). The first section is based on the standard linear differential equations. The second section is based on non-linear theory and covers advancements in dynamic FM over the past three decades (1990s – 2022). Both sections are complimentary and exploit standard terminology in oscillation theory when possible. The first section can be supplemented with the chapter on oscillations by Tipler and Mosca1 and with Feynman’s lectures on physics, volume 1, chapters 21 to 23. These two textbooks use standard terminology, even if not necessarily the same. Examples are drawn here from both texts and analogies also exploited. The second section is mathematically more advanced since it discusses nonlinear theory. The second section is highly geared towards applications in AFM, but this does not mean that the discussion lacks generality. Rather, the nonlinear theory presented here is highly general and translational. The second section can be supplemented by following Raman’s course on dynamic AFM. His course is available online3 . There are another two important resources to supplement the second section. First, the thesis of Carlos Álvarez Amo, also available online4 . Second, a varied set of papers that are referenced throughout the text., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Status and challenges for molecular solar thermal energy storage system based devices

  • Wang, Zhihang
  • Hölzel, Helen
  • Moth-Poulsen, Kasper
Molecular solar thermal energy storage systems (MOST) offer emission-free energy storage where solar power is stored via valence isomerization in molecular photoswitches. These photoswitchable molecules can later release the stored energy as heat on-demand. Such systems are emerging in recent years as a vibrant research field that is rapidly transitioning from basic research to applications. Since a major part of the attention is focused on molecular design and engineering, MOST-based device development has not been systematically summarized and introduced to a broad audience. This tutorial review will discuss the most commonly used and developed devices from a chemical engineering point of view. It is expected that future developers of MOST technology could be inspired by the existing devices, keeping in mind the summarized essential practical challenges towards large-scale implementations and more innovative applications., The authors would like to acknowledge the financial support from the Swedish research foundation FORMAS, the Swedish Energy Agency, Go¨ran Gustafson Foundation, the European Union’s Horizon 2020 research and innovation program under grant agreement No. 951801 and the European Research Council (ERC) through CoG Photherm., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Significance of molecular and crystal structure on organic semiconductor doping

  • Babuji, Adara
Doctoral Thesis in Materials Science.-- Group of Physical Chemistry of Surfaces and Interfaces, Institut de Ciència de Materials de Barcelona.-- Department of Physics, Faculty of Science, Universitat Autònoma de Barcelona.-- Supervisors: Dr. Esther Barrena, Dr. Carmen Ocal; Tutor: Dr. Eva Maria Pellicer Vilà., Organic semiconductor devices are gaining importance by opening a wide variety of applications nowadays. A key strategy for developing better performing organic electronic devices is via molecular doping, where a dopant molecule is introduced to increase charge carriers. Despite the advances in the field, very few studies have focused on understanding the structural-property relationships in molecular doping. It is well known that the structure of OSC molecules affect the crystallinity of the films but its implications on the doping mechanism and efficiency of doping have not been fully explored. In this thesis, we explore the dopant/organic semiconductor interfacial properties in relation to the molecular structure of the employed molecules. BTBT derivatives with different side groups in combination with two dopants, which have similar ionization energy but with different molecular shapes have been chosen for the investigation. By using a combination of synchrotron-based X-ray diffraction techniques, AFM and spectroscopic methods, the interfacial properties and evolution of electronic levels during doping have been investigated. First, the structure of the interface formed between C60F48 and C8-BTBThas been investigated. The impact of C60F48 on C8-BTBT OFETs was demonstrated to have a double beneficial role in improving the mobility and stability of C8-BTBT OFETs. Further investigation of the role of organic semiconductor side groups in the interfacial properties has been conducted by comparing the C60F48/DPh-BTBT and C60F48/C8-BTBT interfaces. Different interfacial morphologies are observed in both cases, which strongly affect the nanoscale work function distribution of the interface. To investigate the influence of dopant molecular structure, heterostructure films of F6TCNNQ on C8-BTBT were investigated. Unlike C60F48, F6TCNNQ is planar. It is observed that F6TCNNQ-C8-BTBT charge transfer complexes were forming at the interface during F6TCNNQ deposition, which generates free mobile carriers in the film hence enhancing the mobility and causing a shift in threshold voltage of C8-BTBT OFETs. Finally, characterization of charge transfer complex formation at different temperatures, inverted heterostructures and C8-BTBT-F6TCNNQ co-evaporated films have been performed., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Plate-Like Colloidal Metal Nanoparticles

  • Scarabelli, Leonardo
  • Sun, Muhua
  • Zhuo, Xiaolu
  • Yoo, Sungjae
  • Millstone, Jill E.
  • Jones, Matthew R.
  • Liz Marzán, Luis M.
This article is part of the Anisotropic Nanomaterials special issue., The pseudo-two-dimensional (2D) morphology of plate-like metal nanoparticles makes them one of the most anisotropic, mechanistically understood, and tunable structures available. Although well-known for their superior plasmonic properties, recent progress in the 2D growth of various other materials has led to an increasingly diverse family of plate-like metal nanoparticles, giving rise to numerous appealing properties and applications. In this review, we summarize recent progress on the solution-phase growth of colloidal plate-like metal nanoparticles, including plasmonic and other metals, with an emphasis on mechanistic insights for different synthetic strategies, the crystallographic habits of different metals, and the use of nanoplates as scaffolds for the synthesis of other derivative structures. We additionally highlight representative self-assembly techniques and provide a brief overview on the attractive properties and unique versatility benefiting from the 2D morphology. Finally, we share our opinions on the existing challenges and future perspectives for plate-like metal nanomaterials., M.R.J. thanks the Robert A. Welch Foundation (grant C-1954), the David and Lucile Packard Foundation (grant 2018-68049), the National Science Foundation for a CAREER award (grant 2145500), and Rice University for financial support. L.S. receives support from the 2020 “la Caixa”Foundation Postdoctoral Junior Leader-Incoming Fellowship (ID 100010434, fellow-ship code LCF/BQ/PI20/11760028), and from a 2022 Leonardo Grant for Researchers and Cultural Creators, BBVA Foundation. L.M.L.-M. acknowledges funding from the European Research Council (ERC Advanced grant 787510, 4DbioSERS) and the Spanish Ministerio de Ciencia e Innovación, MCIN/AEI/10.13039/501100011033 (grant PID2020-117779RB-I00). X.Z. acknowledges financial support from the Juan de la Cierva fellowship (FJC2018-036104-I) and CUHK-Shenzhen (UDF01002665). M.S. thanks the Natural Science Foundation of China for their support (grant no. 22202133). J.E.M. thanks Leo and Theresa Wegemer for their generous support., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

A practical perspective on the potential of rechargeable Mg batteries

  • Blázquez, J. Alberto
  • Maça, Rudi R.
  • Leonet, Olatz
  • Azaceta, Eneko
  • Mukherjee, Ayan
  • Zhao-Karger, Zhirong
  • Li, Zhenyou
  • Kovalevsky, Aleksey
  • Fernández-Barquín, Ana
  • Mainar, Aroa R.
  • Jankowski, Piotr
  • Rademacher, Laurin
  • Dey, Sunita
  • Dutton, Siân E.
  • Grey, Clare P.
  • Drews, Janina
  • Häcker, Joachim
  • Danner, Timo
  • Latz, Arnulf
  • Sotta, Dane
  • Palacín, M. Rosa
  • Martin, Jean Frédéric
  • Lastra, Juan Maria García
  • Fichtner, Maximilian
  • Kundu, Sumana
  • Kraytsberg, Alexander
  • Ein-Eli, Yair
  • Noked, Malachi
  • Aurbach, Doron
Emerging energy storage systems based on abundant and cost-effective materials are key to overcome the global energy and climate crisis of the 21st century. Rechargeable Magnesium Batteries (RMB), based on Earth-abundant magnesium, can provide a cheap and environmentally responsible alternative to the benchmark Li-ion technology, especially for large energy storage applications. Currently, RMB technology is the subject of intense research efforts at laboratory scale. However, these emerging approaches must be placed in a real-world perspective to ensure that they satisfy key technological requirements. In an attempt to bridge the gap between laboratory advancements and industrial development demands, herein, we report the first non-aqueous multilayer RMB pouch cell prototypes and propose a roadmap for a new advanced RMB chemistry. Through this work, we aim to show the great unrealized potential of RMBs., This work was funded by European Union's Horizon 2020 research and innovation program under the FET Proactive call with grant agreement no 824066 via the “E-MAGIC” project., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Strategies for surface coatings of implantable cardiac medical devices

  • Coronel Meneses, David
  • Sánchez Trasviña, Calef
  • Ratera, Immaculada
  • Mayolo Deloisa, Karla
Cardiac medical devices (CMDs) are required when the patient's cardiac capacity or activity is compromised. To guarantee its correct functionality, the building materials in the development of CMDs must focus on several fundamental properties such as strength, stiffness, rigidity, corrosion resistance, etc. The challenge is more significant because CMDs are generally built with at least one metallic and one polymeric part. However, not only the properties of the materials need to be taken into consideration. The biocompatibility of the materials represents one of the major causes of the success of CMDs in the short and long term. Otherwise, the material will lead to several problems of hemocompatibility (e.g., protein adsorption, platelet aggregation, thrombus formation, bacterial infection, and finally, the rejection of the CMDs). To enhance the hemocompatibility of selected materials, surface modification represents a suitable solution. The surface modification involves the attachment of chemical compounds or bioactive compounds to the surface of the material. These coatings interact with the blood and avoid hemocompatibility and infection issues. This work reviews two main topics: 1) the materials employed in developing CMDs and their key characteristics, and 2) the surface modifications reported in the literature, clinical trials, and those that have reached the market. With the aim of providing to the research community, considerations regarding the choice of materials for CMDs, together with the advantages and disadvantages of the surface modifications and the limitations of the studies performed., This project has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement No. 801342 (Tecniospring INDUSTRY) and from the Government of Catalonia’s Agency for Business Competitiveness (ACCIÓ; TECSPR19-1-0065). IR has received funding from European Union’s Horizon 2020 research and innovation program in HORIZON-RIA action (Nabiheal; Grant agreement 101092269); MICINN (Grant agreement PID 2019-105622RBI00); Instituto de Salud Carlos III (ISCIII) through the Networking Research Center on Bioengineering, Biomaterialsand Nanomedicine, CIBER-BBN; the Fundació Marató de TV3 (Nr.201812) and Generalitat de Catalunya (2021 SGR 00438). All figures were designed with BioRender.com., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Direct Bottom-Up In Situ Growth: A Paradigm Shift for Studies in Wet-Chemical Synthesis of Gold Nanoparticles

  • Vinnacombe-Willson, Gail A.
  • Conti, Ylli
  • Stefancu, Andrei
  • Weiss, Paul S.
  • Cortés, Emiliano
  • Scarabelli, Leonardo
Plasmonic gold nanoparticles have been used increasingly in solid-state systems because of their applicability in fabricating novel sensors, heterogeneous catalysts, metamaterials, and thermoplasmonic substrates. While bottom-up colloidal syntheses take advantage of the chemical environment to control size, shape, composition, surface chemistry, and crystallography of the nanostructures precisely, it can be challenging to assemble nanoparticles rationally from suspension onto solid supports or within devices. In this Review, we discuss a powerful recent synthetic methodology, bottom-up in situ substrate growth, which circumvents time-consuming batch presynthesis, ligand exchange, and self-assembly steps by applying wet-chemical synthesis to form morphologically controlled nanostructures on supporting materials. First, we briefly introduce the properties of plasmonic nanostructures. Then we comprehensively summarize recent work that adds to the synthetic understanding of in situ geometrical and spatial control (patterning). Next, we briefly discuss applications of plasmonic hybrid materials prepared by in situ growth. Overall, despite the vast potential advantages of in situ growth, the mechanistic understanding of these methodologies remains far from established, providing opportunities and challenges for future research., L.S., P.S.W., E.C., and G.A.V.-W. thank the Spanish National Research Council (CSIC) for the I-LINK 2020 international travel grant, which facilitated the international exchange period necessary for completion of this work. L.S. and Y.C. receive support from the 2020 “la Caixa” Foundation Postdoctoral Junior Leader-Incoming Fellowship (ID 100010434, fellowship code LCF/BQ/PI20/11760028). L.S. receives support from a 2022 Leonardo Grant for Researchers and Cultural Creators, BBVA Foundation. The BBVA Foundation accepts no responsibility for the opinions, statements and contents included in the project and/or the results thereof, which are entirely the responsibility of the authors. Y.C. additionally acknowledges the auspices of the UAB material science doctoral program. A.S. and E.C. acknowledge funding and support from the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) under Germany’s Excellence Strategy–EXC 2089/1–390776260, the Bavarian program Solar Energies Go Hybrid (SolTech), the Center for NanoScience (CeNS), and the European Commission through the ERC Starting Grant CATALIGHT (802989). A.S. acknowledges the AvH foundation for a postdoctoral fellowship award., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Triplet-triplet annihilation mediated photon upconversion solar energy systems

  • Naimovičius, Lukas
  • Bharmoria, Pankaj
  • Moth-Poulsen, Kasper
Solar energy harvesting is among the best solutions for a global transition toward carbon-neutral energy technologies. The existing solar energy harvesting technologies like photovoltaics (PV) and emerging molecular concepts such as solar fuels and molecular solar thermal energy storage (MOST) are rapidly developing. However, to realize their full potential, fundamental solar energy loss channels like photon transmission, recombination, and thermalization need to be addressed. Triplet-triplet annihilation mediated photon upconversion (TTA-UC) is emerging as a way to overcome losses due to the transmission of photons below the PV/chromophore band gap. However, there are several challenges related to the integration of efficient solid-state TTA-UC systems into efficient devices such as: wide band absorption, materials sustainability, and device architecture. In this article, we review existing work, identify and discuss challenges as well as present our perspective toward possible future directions., L. N. acknowledges Erasmus+ Traineeship Program, P. B. acknowledges La-Caixa junior research leadership-post doctoral program (ID: 100010434, fellowship code: LCF/BQ/P122/11910023). K. M. P. acknowledges funding from the European Research Council (No. 101002131), the Swedish Energy Agency, the Göran Gustafsson Foundation, the Swedish Research Council, Swedish Research Council Formas, the European Research Council (ERC) under grant agreement CoG, PHOTHERM – 101002131, the Catalan Institute of Advanced Studies (ICREA), and the European Union's Horizon 2020 Framework Programme under grant agreement no. 951801., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Disentangling stress and strain effects in ferroelectric HfO2

  • Song, Tingfeng
  • Lenzi, Veniero
  • Silva, José P. B.
  • Marques, Luís
  • Fina, Ignasi
  • Sánchez Barrera, Florencio
Ferroelectric HfO2 films are usually polycrystalline and contain a mixture of polar and nonpolar phases. This challenges the understanding and control of polar phase stabilization and ferroelectric properties. Several factors such as dopants, oxygen vacancies, or stress, among others, have been investigated and shown to have a crucial role on optimizing the ferroelectric response. Stress generated during deposition or annealing of thin films is a main factor determining the formed crystal phases and influences the lattice strain of the polar orthorhombic phase. It is difficult to discriminate between stress and strain effects on polycrystalline ferroelectric HfO2 films, and the direct impact of orthorhombic lattice strain on ferroelectric polarization has yet to be determined experimentally. Here, we analyze the crystalline phases and lattice strain of several series of doped HfO2 epitaxial films. We conclude that stress has a critical influence on metastable orthorhombic phase stabilization and ferroelectric polarization. On the contrary, the lattice deformation effects are much smaller than those caused by variations in the orthorhombic phase content. The experimental results are confirmed by density functional theory calculations on HfO2 and Hf0.5Zr0.5O2 ferroelectric phases., Financial support from the Spanish Ministry of Science and Innovation (MCIN/AEI/ 10.13039/501100011033), through the Severo Ochoa FUNFUTURE (CEX2019-000917- S), PID2020-112548RB-I00 and PID2019-107727RB-I00 projects, from Generalitat de Catalunya (2021 SGR 00804) and from CSIC through the i-LINK (LINKA20338) program is acknowledged. We also acknowledge project TED2021-130453B-C21, funded by MCIN/AEI/10.13039/501100011033 and European Union NextGeneration EU/PRTR. TS is financially supported by China Scholarship Council (CSC) with No. 201807000104. This work was supported by: (i) the Portuguese Foundation for Science and Technology (FCT) in the framework of the Strategic Funding Contract UIDB/04650/2020; (ii) the exploratory research project 2022.01740.PDTC (DOI:10.54499/2022.01740.PTDC) and (iii) the project M-ERA-NET3/0003/2021 - NanOx4EStor grant agreement No 958174 (DOI:10.54499/M-ERA-NET3/0003/2021). J. P. B. S. also thanks FCT for the contract under the Institutional Call to Scientific Employment Stimulus – 2021 Call (CEECINST/00018/2021). This work was developed within the scope of the project CICECO-Aveiro Institute of Materials, UIDB/50011/2020, UIDP/50011/2020 & LA/P/0006/2020, financed by national funds through the FCT/MCTES (PIDDAC)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Biohybrid Hydrogels for Tumoroid Culture

  • Castellote Borrell, Miquel
  • Merlina, Francesca
  • Rodríguez, Adrián R.
  • Guasch, Judit
Tumoroids are 3D in vitro models that recapitulate key features of in vivo tumors, such as their architecture - hypoxic center and oxygenated outer layer - in contrast with traditional 2D cell cultures. Moreover, they may be able to preserve the patient-specific signature in terms of cell heterogeneity and mutations. Tumoroids are, therefore, interesting tools for improving the understanding of cancer biology, developing new drugs, and potentially designing personalized therapeutic plans. Currently, tumoroids are most often established using basement membrane extracts (BME), which provide a multitude of biological cues. However, BME are characterized by a lack of well-defined composition, limited reproducibility, and potential immunogenicity as a consequence of their natural origin. Synthetic polymers can overcome these problems but lack structural and biochemical complexity, which can limit the functional capabilities of organoids. Biohybrid hydrogels consisting of both natural and synthetic components can combine their advantages and offer superior 3D culture systems. In this review, it is summarized efforts devoted to producing tumoroids using different types of biohybrid hydrogels, which are classified according to their crosslinking mechanism., The authors acknowledge D. P. Rosenblatt for proofreading this manuscript. This work was funded by the Spanish Ministry of Science and Innovation through the “Ramón y Cajal” Programme (RYC-2017-22614), the project PID2020-115296RA-I00 and the “Severo Ochoa” Programme for Centres of Excellence in R&D (CEX2019-000917-S). Additionally, it has been supported by the Max Planck Society through the Max Planck Partner Group “Dynamic Biomimetics for Cancer Immunotherapy” in collaboration with the Max Planck for Medical Research (Heidelberg, Germany). This research was also funded by Instituto de Salud Carlos III through Consorcio Centro de Investigación Biomédica en Red (CIBER) with the projects “Alycia” (Nr. BBN18PI01) and “Gels4ACT” (Nr. BBN20PIV02). This work has been developed inside the “Materials Science” Ph.D. program of UAB., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Chemical synthesis of complex oxide thin films and freestanding membranes

  • Sallés, Pol
  • Machado, Pamela
  • Yu, Pengmei
  • Coll, Mariona
Oxides offer unique physical and chemical properties that inspire rapid advances in materials chemistry to design and nanoengineer materials compositions and implement them in devices for a myriad of applications. Chemical deposition methods are gaining attention as a versatile approach to develop complex oxide thin films and nanostructures by properly selecting compatible chemical precursors and designing an accurate cost-effective thermal treatment. Here, upon describing the basics of chemical solution deposition (CSD) and atomic layer deposition (ALD), some examples of the growth of chemically-deposited functional complex oxide films that can have applications in energy and electronics are discussed. To go one step further, the suitability of these techniques is presented to prepare freestanding complex oxides which can notably broaden their applications. Finally, perspectives on the use of chemical methods to prepare future materials are given., This work was funded by CEX2019-00917-S/MICIN/AEI/10.13039/501100011033 and PID2020-114224RB-I00/MICIN/AEI/10.13039/501100011033. We also acknowledge the financial support from the 2020 Leonardo grant for Researchers and Cultural Creators BBVA Foundation, the i-link A20346-CSIC project. The project that gave rise to these results received the support of a fellowship from the “la Caixa” Foundation (ID 100010434). The fellowship code is LCF/BQ/DI19/11730026. P. M. is grateful for financial support from the FPI fellowship (PRE2018-084618 MCIN/AEI/10.13039/5011000011033 by ESF invest in your future). We also acknowledge financial support from China Scholarship Council to P. Yu (201606920073). The work of P. M., P. S. and P. Y. has been done in the framework of the doctorate in Materials Science of the Autonomous University of Barcelona. We would like to acknowledge all the collaborators from those who provided novel metal precursors to the experts in thin film deposition and advanced characterization and SUMAN group members who made the work presented in this Feature article possible., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

How to verify the precision of density-functional-theory implementations via reproducible and universal workflows

  • Bosoni, Emanuele
  • Beal, Louis
  • Bercx, Marnik
  • Blaha, Peter
  • Blügel, Stefan
  • Bröder, Jens
  • Callsen, Martin
  • Cottenier, Stefaan
  • Degomme, Augustin
  • Dikan, Vladimir
  • Eimre, Kristjan
  • Flage-Larsen, Espen
  • Fornari, Marco
  • García Arribas, Alberto
  • Genovese, Luigi
  • Giantomassi, Matteo
  • Huber, Sebastiaan P.
  • Janssen, Henning
  • Kastlunger, Georg
  • Krack, Matthias
  • Kresse, Georg
  • Kühne, Thomas D.
  • Lejaeghere, Kurt
  • Madsen, Georg K.H.
  • Marsman, Martijn
  • Marzari, Nicola
  • Michalicek, Gregor
  • Mirhosseini, Hossein
  • Müller, Tiziano M.A.
  • Petretto, Guido
  • Pickard, Chris J.
  • Poncé, Samuel
  • Rignanese, Gian Marco
  • Rubel, Oleg
  • Ruh, Thomas
  • Sluydts, Michael
  • Vanpoucke, Danny E.P.
  • Vijay, Sudarshan
  • Wolloch, Michael
  • Wortmann, Daniel
  • Yakutovich, Aliaksandr V.
  • Yu, Jusong
  • Zadoks, Austin
  • Zhu, Bonan
  • Pizzi, Giovanni
Density-functional theory methods and codes adopting periodic boundary conditions are extensively used in condensed matter physics and materials science research. In 2016, their precision (how well properties computed with different codes agree among each other) was systematically assessed on elemental crystals: a first crucial step to evaluate the reliability of such computations. In this Expert Recommendation, we discuss recommendations for verification studies aiming at further testing precision and transferability of density-functional-theory computational approaches and codes. We illustrate such recommendations using a greatly expanded protocol covering the whole periodic table from Z = 1 to 96 and characterizing 10 prototypical cubic compounds for each element: four unaries and six oxides, spanning a wide range of coordination numbers and oxidation states. The primary outcome is a reference dataset of 960 equations of state cross-checked between two all-electron codes, then used to verify and improve nine pseudopotential-based approaches. Finally, we discuss the extent to which the current results for total energies can be reused for different goals., This work was inspired and is supported in part by the European Union’s Horizon 2020 research and innovation programme under grant agreement No. 676598 and grant agreement No. 824143 (European MaX Centre of Excellence “Materials design at the Exascale”) and by NCCR MARVEL, a National Centre of Competence in Research, funded by the Swiss National Science Foundation (grant number 205602). For the purpose of Open Access, a CC BY public copyright licence is applied to any Author Accepted Manuscript (AAM) version arising from this submission. We acknowledge Flaviano José dos Santos for useful discussions on the analysis of the smearing types and k-point convergence, and Xavier Gonze, Marc Torrent, and François Jollet for useful discussions on PAW pseudopotentials. M.F. and N.M. acknowledge the contribution of Sadasivan Shankar in early discussions about the use of 6 prototype oxides as general platform to explore the transferability of pseudopotentials. Work at ICMAB (E.B., A.G., V.D.) is supported by the Severo Ochoa Centers of Excellence Program (MCIN CEX2019- 000917-S), by grant PGC2018-096955-B-C44 of MCIN/AEI/10.13039/501100011033, “ERDF A way of making Europe”, and by GenCat 2017SGR1506. We also thank the Barcelona Supercomputer Center for computational resources. V.D. acknowledges support from DOC-FAM, European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 754397. O.R. acknowledges travel support from WIEN2k (Technical University of Vienna). The Jülich team (S.B., J.B., H.J., G.M., D.W) acknowledges support by the Joint Lab Virtual Materials Design (JL-VMD) of the Forschungszentrum Jülich, the Helmholtz Platform for Research Software Engineering - Preparatory Study (HIRSE_PS), the Joint Virtual Laboratory AI, Data Analytics and Scalable Simulation (AIDAS) of the Forschungszentrum Jülich and the French Alternative Energies and Atomic Energy Commission, and we gratefully acknowledge the computing time granted through JARA on the supercomputers JURECA83 at Forschungszentrum Jülich and CLAIX at RWTH Aachen University. H.M and T.D.K (University of Paderborn) gratefully acknowledge the Gauss Centre for Supercomputing e.V. (www.gausscentre. eu) for funding this project by providing computing time on the GCS Supercomputer JUWELS at Jülich Supercomputing Centre (JSC). S.P. and G.-M.R. (Université catholique de Louvain) acknowledge support from the F.R.S.-FNRS. Computational resources have been provided by the PRACE-21 resources MareNostrum at BSC-CNS and by the Consortium des Équipements de Calcul Intensif (CÉCI), funded by the Fonds de la Recherche Scientifique de Belgique (F.R.S.-FNRS) under Grant No. 2.5020.11 and by the Walloon Region as well as computational resources awarded on the Belgian share of the EuroHPC LUMI supercomputer. G.Ka. and S.V. received funding from the VILLUM Centre for the Science of Sustainable Fuels and Chemicals (9455) from VILLUM FONDEN. Computational resources were provided by the Niflheim supercomputing cluster at the Technical University of Denmark (DTU). They also thank Jens Jørgen Mortensen and Ask H. Larsen for the valuable discussions on optimizing the workflow for the GPAW code. S.C. acknowledges financial support from OCAS NV by an OCAS-endowed chair at Ghent University. The computational resources and services used at Ghent University were provided the VSC (Flemish Supercomputer Center), funded by the Research Foundation Flanders (FWO) and the Flemish Government – department EWI. Accepted Manuscript by Nature Review Physics Version of Record at https://doi.org/10.1038/s42254-023-00655-3 19/94 M.W. gratefully acknowledges computational resources provided by the Vienna Scientific Cluster (VSC). This research was funded in part by the Austrian Science Fund (FWF) [P 32711]. E.F.L. would like to acknowledge resources provided by Sigma2 - the National Infrastructure for High Performance Computing and Data Storage in Norway and support from the Norwegian Research Infrastructure Services (NRIS). B.Z. is grateful to the UK Materials and Molecular Modelling Hub for computational resources, which is partially funded by EPSRC (EP/P020194/1 and EP/T022213/1) and acknowledge the use of the UCL Myriad and Kathleen High Performance Computing Facility (Myriad@UCL, Kathleen@UCL), and associated support services, in the completion of this work. N.M., G.Pi., and A.G. acknowledge support from the European Union’s Horizon 2020 research and innovation programme under grant agreement No. 957189 (BIG-MAP), also part of the BATTERY 2030+ initiative under grant agreement No. 957213. G.P., J.Y. and G.-M.R. acknowledge support by the Swiss National Science Foundation (SNSF) and by the Fonds de la Recherche Scientifique de Belgique (F.R.S.-FNRS) through the “FISH4DIET” Project (SNSF grant 200021E_206190 and F.R.S.-FNRS grant T.0179.22). G.P. acknowledges support by the Open Research Data Program of the ETH Board, under the Establish project “PREMISE”. J.Y. acknowledges support from the European Union’s Horizon 2020 research and innovation programme under grant agreement No. 760173 (MARKETPLACE)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Impact of high growth rates on the microstructure and vortex pinning of high-temperature superconducting coated conductors

  • Puig Molina, Teresa
  • Gutierrez Royo, Joffre 
  • Obradors, Xavier
High-temperature superconducting REBa2Cu3O7 (RE = rare earth or yttrium) coated conductors have emerged as a new class of materials with exceptional physical properties, such as very high critical currents and irreversibility field. Understanding the physics of vortices in these complex materials and controlling of the atomic structure of defects have made it possible to design their performance and achieve exceptional values of superconducting properties which enable their integration into devices. In order to improve performance and reduce costs, faster growth methods are now being explored, which raise new vortex physics scenarios. In this Technical Review, we distinguish the rich vortex pinning microstructure for vapour–solid, solid–solid and liquid–solid growth methods and how it is modified in the fast-growth process. The interplay between vortex physics and defect structure generated at high growth rates is addressed, as well as the implications of the electronic structure on vortex physics., We acknowledge the European Research Council for the ULTRASUPERTAPE project (ERC-2014-ADG-669504), IMPACT project (ERC-2019-PoC-8749) and SMS-INKS (ERC-2022- PoC-101081998), and EU COST actions OPERA (CA20116) and SUPERQUMAP (CA-21144). We also acknowledge the financial support from the Spanish Ministry of Science and Innovation and the European Regional Development Fund, MCIU/AEI/FEDER for SUPERENERTECH (PID2021–127297OB-C21), FUNFUTURE “Severo Ochoa” Program for Centers of Excellence in R&D (CEX2019–000917-S) and HTS-JOINTS (PDC2022–133208-I00) and PTI+TransEner CSIC programme for Spanish NGEU. The authors also thank the Catalan Government for 2021 SGR 00440. The access and staff support of several advanced facilities (Soleil and ALBA synchrotrons, INMA and ICN2 electron microscopes, ICMAB scientific services, NHMF Laboratory) are also acknowledged. Many discussions with academic and industrial colleagues and collaborators in the field of coated conductors and vortex pinning are acknowledged., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Application of radical dendrimers as organic radical contrast agents for magnetic resonance imaging

  • Tian, Chenyu
  • Zhang, Songbai
  • Lloveras, Vega
  • Vidal Gancedo, José
To develop metal-free magnetic resonance imaging (MRI) contrast agents, organic radical based contrast agents have been proposed as a promising alternative to obtain less toxic and safer MRI contrast agents. However, the low relaxivity and rapid in vivo reduction have limited the application of organic radicals as MRI contrast agents. As a special class of polymer, dendrimers with three-dimensional molecular structure and multiple tunable functional groups on surface, enable the facile chemical modification with organic radicals. With dendrimer as scaffold, a considerable amount of effort has been made to develop completely organic contrast agents. Herein, this mini review reports the recent advances of contrast agents with dendrimers as scaffold functionalized with radicals on the surface., The authors would like to acknowledge the financial support from the Spanish Government (PID2019-105622RB-I00, CTQ2017-90596-REDT and Severo Ochoa FUNFUTURE-FIP-2020 projects), CSIC (Intramural CSIC projects 201760E080 and 202360E61), Generalitat de Catalunya (2021 SGR 00438) and CIBER-BBN (BBN23PIV01 project). ICMAB acknowledges Spanish MICINN through the Severo Ochoa Centres of Excellence Programme Grant CEX2019-000917-S. Songbai Zhang acknowledges the China Scholarship Council., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Signal amplification properties of Electrolyte-Gated Organic Field-Effect Transistors

  • Lago, Nicolo
  • Ruiz Molina, Sara
  • Mas Torrent, Marta
  • Casalini, Stefano
  • Cester, Andrea
Electrolyte-gated organic field-effect transistors (EGOFETs) are key enabling elements for the development of bio-electronic devices, therefore it is imperative to increase the knowledge on how EGOFETs work, not only in stationary conditions but also in the time and frequency domain. In this framework, the EGOFET small-signal circuit is presented and the recording of action potentials (APs) is simulated by analyzing EGOFETs as trans-conductance amplifiers as well as voltage amplifiers. It is shown that when operating as a trans-conductance amplifier, EGOFETs ideally allow to well preserve the shape of the recorded AP but they amplify high-frequency noise thus heavily worsening the signal-to-noise ratio (SNR). Whereas, when implemented in a voltage amplifier, EGOFETs allow a substantial SNR improvement, but introduce some distortion in the recorded signal., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Multichromophoric photoswitches for solar energy storage: from azobenzene to norbornadiene, and MOST things in between

  • Salthouse, Rebecca J.
  • Moth-Poulsen, Kasper
The ever-increasing global demands for energy supply and storage have led to numerous research efforts into finding and developing renewable energy technologies. Molecular solar thermal energy storage (MOST) systems utilise molecular photoswitches that can be isomerized to a metastable high-energy state upon solar irradiation. These high-energy isomers can then be thermally or catalytically converted back to their original state, releasing the stored energy as heat on-demand, offering a means of emission-free energy storage from a closed system, often from only organic materials. In this context, multichromophoric systems which incorporate two or more photochromic units may offer additional functionality over monosubstituted analogues, due to their potential to access multiple states as well as having more attractive physical properties. The extended conjugation offered by these systems can lead to a red shift in the absorption profile and hence a better overlap with the solar spectrum. Additionally, the multichromophoric design may lead to increased energy storage densities due to some of the molecular weight being ‘shared’ across several energy storage units. This review provides an overview and analysis of multichromophoric photoswitches incorporating the norbornadiene/quadricyclane (NBD/QC) couple, azobenzene (AZB), dihydroazulene (DHA) and diarylethene (DAE) systems, in the context of energy storage applications. Mixed systems, where two or more different chromophores are linked together in one molecule, are also discussed, as well as limitations such as the loss of photochromism due to inner filter effects or self-quenching, and how these challenges may be overcome in future designs of multichromophoric systems., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Structural approach to charge density waves in low-dimensional systems: electronic instability and chemical bonding

  • Pouget, Jean-Paul
  • Canadell, Enric
The charge density wave (CDW) instability, usually occurring in low-dimensional metals, has been a topic of interest for longtime. However, some very fundamental aspects of the mechanism remain unclear. Recently, a plethora of new CDW materials, a substantial fraction of which is two-dimensional or even three-dimensional, has been prepared and characterised as bulk and/or single-layers. As a result, the need for revisiting the primary mechanism of the instability, based on the electron-hole instability established more than 50 years ago for quasi-one-dimensional (quasi-1D) conductors, has clearly emerged. In this work, we consider a large number of CDW materials to revisit the main concepts used in understanding the CDW instability, and emphasise the key role of the momentum dependent electron-phonon coupling in linking electronic and structural degrees of freedom. We argue that for quasi-1D systems, earlier weak coupling theories work appropriately and the energy gain due to the CDW and the concomitant periodic lattice distortion (PLD) remains primarily due to a Fermi surface nesting mechanism. However, for materials with higher dimensionality, intermediate and strong coupling regimes are generally at work and the modification of the chemical bonding network by the PLD is at the heart of the instability. We emphasise the need for a microscopic approach blending condensed matter physics concepts and state-of-the-art first-principles calculations with quite fundamental chemical bonding ideas in understanding the CDW phenomenon in these materials., E C acknowledges support from the Spanish MICIU through Grant PID2022-139776NB-C61 and the Severo Ochoa FUNFUTURE (CEX2019-000917-S) Excellence Centre distinction as well as from Generalitat de Catalunya (2021SGR01519). We thank Prs. S J L Billinge, J Laverock and P A Lee for permission to reproduce their figures. We are grateful to Drs. B Guster, D Boskovic, M Pruneda and P Ordejón for their help with the Lindhard response calculations. We are indebted with B Guster for his disponibility during the preparation of this manuscript. The experimental work reported here is in great part due to many collaborations of J-P P during several decades. Most of the relevant collaborations are quoted in the list of references., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Comparative study of carbon felt activation methods as electrodes in vanadium flow batteries

  • Esteve Llorca, Maia
This thesis is developed at the Nanostructured Interfaces for Electrochemical Energy Storage research line of the Institute of Materials Science of Barcelona (ICMAB, CSIC)., This thesis is developed at the Nanostructured Interfaces for Electrochemical Energy Storage research line of the Institute of Materials Science of Barcelona (ICMAB, CSIC) and focuses on experimental investigation of activation carbon felts (CF) as vanadium redox flow battery (VRFB) electrodes by electrochemical treatments. Because of the environmental impact of the present days, the Redox Flow Battery has emerged as an energy storage system. In this work, a series of electrochemical treatments were carried out using either sulphuric or phosphoric acids to activate the carbon felts that act as electrodes in these batteries. Following treatments, these were tested using a VRFB, and characterised by SEM and XPS. The felts treated in sulphuric acid slightly improve the thermally activated felt benchmark when placed in the positive electrode. Conversely, treatments in phosphoric acid demonstrated capable of improving results provided by the benchmark at both the negative and positive electrode. Overall, the work shows that electrodes activated by electrochemical treatments with low environmental impact and proper performance can be produced., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Manufacturing and testing of thin-film electrochemical cells in liquid electrolyte on a chip intended for TEM observation in operando experiments

  • Obradors Castillo, Anna Xiu
Nanoscience and Nanotechnology Final Bachelor’s Degree Project, In operando experiments aim to perform in situ measurements of an electrochemical cell on a chip using transmission electron microscopy (TEM) during operation, which is a crucial requirement for understanding the fundamental physical and electrochemical phenomena taking place in a battery. These findings can enhance the understanding of electrochemical cells' behaviour and pave the way for designing more efficient and effective electrochemical energy-storage devices. Hence, the aim of this project is manufacturing a thin-film cell suitable for in operando TEM measurements by testing different chip designs and liquid electrolytes. This kind of cells require electrodes thinner than a few hundred nanometers, but typical commercial active material powders mainly consist of micrometric particles. So, this dissertation is focused on designing a process to prepare suitable cells from commercial materials. To accomplish this, particle size selection of LiMn2O4 was performed using separation methods. Having the ability to both deintercalate and intercalate, LiMn2O4 is used as active material for all electrodes in the thin-film cell. Therefore, nanoparticles are selected by centrifugation suspended in ethanol. Dynamic Light Scattering is employed to characterize their size and concentration to study the effects of the solvent, the centrifugation speed, and the use of filters. Then, adequate particles are drop casted on the chip with Polyvinylidene Fluoride (PVDF) in N-Methyl-2-pyrrolidone (NMP) to adhere them onto the surface. This particle distribution on the chip can be observed in Scanning Electron Microscopy (SEM). It was possible to demonstrate with planar microcells on chips electrochemical features that reproduce those typically shown by macroscopic cells. For example, 5 M LiNO3 had a good CV performance with 70 nA for the oxidation peak and -55 nA for the reduction one when selected depositing LiMn2O4 particles with 500 rpm centrifugation. The cell collectors represented a major failure source and its compatibility with the electrolyte and electrochemical conditions need further study, With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Do Ionic Liquids Exhibit the Required Characteristics to Dissolve, Extract, Stabilize, and Purify Proteins? Past-Present-Future Assessment

  • Bharmoria, Pankaj
  • Tietze, Alesia A
  • Mondal, Dibyendu
  • Kang, Tejwant Singh
  • Kumar, Arvind
  • Freire, Mara G
Proteins are highly labile molecules, thus requiring the presence of appropriate solvents and excipients in their liquid milieu to keep their stability and biological activity. In this field, ionic liquids (ILs) have gained momentum in the past years, with a relevant number of works reporting their successful use to dissolve, stabilize, extract, and purify proteins. Different approaches in protein-IL systems have been reported, namely, proteins dissolved in (i) neat ILs, (ii) ILs as co-solvents, (iii) ILs as adjuvants, (iv) ILs as surfactants, (v) ILs as phase-forming components of aqueous biphasic systems, and (vi) IL-polymer-protein/peptide conjugates. Herein, we critically analyze the works published to date and provide a comprehensive understanding of the IL-protein interactions affecting the stability, conformational alteration, unfolding, misfolding, and refolding of proteins while providing directions for future studies in view of imminent applications. Overall, it has been found that the stability or purification of proteins by ILs is bispecific and depends on the structure of both the IL and the protein. The most promising IL-protein systems are identified, which is valuable when foreseeing market applications of ILs, e.g., in "protein packaging" and "detergent applications". Future directions and other possibilities of IL-protein systems in light-harvesting and biotechnology/biomedical applications are discussed., This work was developed within the scope of the project CICECO-Aveiro Institute of Materials, UIDB/50011/2020 (DOI 10.54499/UIDB/50011/2020), UIDP/50011/2020 (DOI 10.54499/UIDP/50011/2020), and LA/P/0006/2020 (DOI 10.54499/LA/P/0006/2020), financed by national funds through the FCT/MCTES (PIDDAC). This work was funded by the PRR - Recovery and Resilience Plan and by the NextGenerationEU funds at Universidade de Aveiro, through the scope of the Agenda for Business Innovation “InsectERA” (Project no. 20 with the application C644917393-00000032). P.B. acknowledges La-Caixa junior research leadership-post doctoral program (ID: 100010434, fellowship code: LCF/BQ/P122/11910023); A.A.T. acknowledges the Knut and Alice Wallenberg Foundation via the Wallenberg Centre for Molecular and Translational Medicine (AT), Swedish Research Council (Project no. 2020-04299) and Cancerfonden, Sweden (Project no. 222409Pj); D.M. acknowledges DST-SERB, India (EEQ/2021/000059), and NANOPLANT project, which received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement no. 856961. T.S.K. acknowledges DST-SERB, India (CRG/2021/005897), and A.K. acknowledges CSIR-CSMCRI under in-house Project MLP0029 for financial supports. Authors acknowledge Ana Sofia Marques from CICECO-Aveiro Institute of Materials for assistance during drawing of some figures., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Progress in superconducting REBa2Cu3O7 (RE = rare earth) coated conductors derived from fluorinated solutions

  • Obradors, Xavier
  • Puig Molina, Teresa
  • Ricart, Susagna
  • Palau, Anna
  • Coll, Mariona
  • Gutierrez Royo, Joffre 
  • Farjas, Jordi
  • Bartolomé, Elena
In this work, we review recent progress achieved in the use of chemical solution deposition (CSD) based on fluorinated metalorganic precursors to grow superconducting REBa2Cu3O7 (REBCO) films and coated conductors (CCs). We examine, first of all, the advances in optimizing the steps related to the solutions preparation, deposition and pyrolysis based on novel low-fluorine metalorganic solutions. We show that a new type of multifunctional colloidal solutions including preformed nanoparticles (NPs), can be used to introduce artificial pinning centers (APCs). We analyze how to disentangle the complex physico-chemical transformations occurring during the pyrolysis with the purpose of maximizing the film thicknesses. Understanding the nucleation and growth mechanisms is shown to be critical to achieve a fine tuning of the final microstructure, either using the spontaneous segregation or the colloidal solution approaches, and make industrially scalable this process. Advanced nanostructural studies have deeply modified our understanding of the defect structure and its genealogy. It is remarkable the key role played by the high concentration of randomly distributed and oriented BaMO3 (M = Zr, Hf) NPs which enhance the concentration of APCs, such as stacking faults and the associated partial dislocations. Correlating the defect structure with the critical current density Jc (H,T,θ) allows to reach a tight control of the vortex pinning properties and to devise a general scheme of the vortex pinning landscape in the whole H-T phase diagram. We also refer to the outstanding recent achievements in enhancing the vortex pinning strength by shifting the carrier concentration in REBCO films towards the overdoped state, where the pinning energy is maximum and so, record values of critical current densities are achieved. This confirms the performance competitiveness of nanocomposite CCs prepared through the CSD route. We conclude with a short summary of the progress in scaling the CC manufacturing using fluorinated solutions., Authors acknowledge the European Union Research Council for EUROTAPES (EU-FP7-NMP-LA-2012-280432) and FASTGRID (EU-H2020, 721019) projects and EU COST actions OPERA (CA20116) and SUPERQUMAP (CA-21144); the European Research Council for ULTRASUPERTAPE (ERC-2014-ADG-669504), IMPACT (ERC-2019-PoC-8749) and SMS-INKS (ERC-2022-PoC-101081998) projects. Also acknowledged is the financial support from the Spanish Ministry of Science and Innovation and the European Regional Development Fund, MCIU/AEI/FEDER for COACHSUPENERGY project (MAT2014-51778-C2-1-R and MAT2014-51778-C2-2-R), SuMaTe (RTI2018-095853-B-C21 and RTI2018-095853-B-C22), SUPERENERTECH (PID2021-127297OB-C21, PID2021-127297OB-C22) and PID2022-138492NB-I00, FUNMAT and FUNFUTURE ICMAB 'Severo Ochoa' Program for Centers of Excellence in R&D (SEV-2015-0496, CEX2019-000917-S) and HTS-JOINTS (PDC2022-133208-I00). They also thank the PTI+ TransEner CSIC program for Spanish NGEU (Regulation (EU) 2020/2094) and Catalan Government for 2017 SGR 1519 and 2021 SGR 00440 and that of Aragon for RASMIA (E12-23R)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Colloidal Plasmonic Metasurfaces for the Enhancement of Non-Linear Optical Processes and Molecular Spectroscopies

  • Conti, Ylli
  • Chiang, Naihao
  • Scarabelli, Leonardo
Colloidal metasurfaces are emerging as promising candidates for the development of functional chemical metamaterials, combining the undisputed control over crystallography and surface chemistry achieved by synthetic nanochemistry with the scalability and versatility of colloidal self-assembly strategies. In light of recent reports of colloidal plasmonic materials displaying high-performing optical cavities, this Minireview discusses the use of this type of metamaterials in the specific context of non-linear optical phenomena and non-linear molecular spectroscopies. Our attention is focused on the opportunities and advantages that colloidal nanoparticles and self-assembled plasmonic metasurfaces can bring to the table compared to more traditional nanofabrication strategies. Specifically, we believe that future work in this direction will express the full potential of non-linear molecular spectroscopies to explore the chemical space, with a deeper understanding of plasmon-molecule dynamics, plasmon-mediated processes, and surface-enhanced chemistry., This project received funding from the Spanish Ministerio de Ciencia e Innovación through the grant FUNFUTURE (CEX2019-000917-S), in the framework of the Spanish Severo Ochoa Centre of Excellence program. L.S. and Y.C.′s research is supported by the 2020 Post-doctoral Junior Leader-Incoming Fellowship by “La Caixa” Foundation (ID 100010434, fellowship code LCF/BQ/PI20/11760028), and a 2022 Leonardo Grant for Researchers and Cultural Creators, BBVA Foundation. Y.C. acknowledges the auspices of the UAB material science doctoral program. N.C. acknowledges support from the US National Science Foundation (CHE-2304955)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Machine Learning Orchestrating the Materials Discovery and Performance Optimization of Redox Flow Battery

  • Tang, Lina
  • Leung, Puiki
  • Xu, Qian
  • Flox, Cristina
This review exploits the crucial role of computational methods in discovering and optimizing materials for redox flow batteries (RFBs). Integration of high-throughput computational screening (HTCS) and machine learning (ML) accelerates materials discovery, guided by algorithms categorizing RFBs. A collaborative exploration, spanning macroscopic to mesoscopic scales, combines quantum machine learning with reinforcement learning, transfer learning, time series analysis, Bayesian optimization, active learning and various generative models. The collaborative integration of ML with computational techniques and experimental methods, anchored in experimentally validated Density Functional Theory (DFT) calculations and molecular dynamics (MD) simulations, proves indispensable for cost-effective RFBs. Data collection and feature engineering are explored, emphasizing the integration of optimization goals and precise data collection within the ML framework. Feature analysis importance is highlighted, utilizing methods such as the filter, embedded, wrapper and deep learning methods for efficient energy materials exploration. Computational perspectives on materials features and operating conditions encompass membrane characteristics, fluid dynamics, temperature dependence and pressure sensitivity. Time-dependent features and ML-generated insights are crucial for understanding cycling performance intricacies, providing a comprehensive understanding of RFB materials., This work is supported by the Innovative research group project of National Natural Science Foundation of China (No. 52021004), the Funds for Chongqing Talents Plan (No. CQYC2021059563), the Fundamental Research Funds for the Central Universities (No. 2021CDJQY-027). C.Flox acknowledges financial support from the Ministery of Science Spain, AEI Severo Ochoa Grant CEX2019-000917-S, and the European Commission under the grant MSCA-IF-EF-ST, proposal number101026162., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Roadmap on multivalent batteries

  • Palacín, M. Rosa
  • Johansson, Patrik
  • Dominko, Robert
  • Dlugatch, Ben
  • Aurbach, Doron
  • Li, Zhenyou
  • Fichtner, Maximilian
  • Lužanin, Olivera
  • Bitenc, Jan
  • Wei, Zhixuan
  • Glaser, Clarissa
  • Janek, Jürgen
  • Fernández Barquín, Ana
  • Mainar, Aroa R.
  • Leonet, Olatz
  • Urdampilleta, Idoia
  • Blázquez, J. Alberto
  • Tchitchekova, Deyana S.
  • Ponrouch, Alexandre
  • Canepa, Pieremanuele
  • Gautam, Gopalakrishnan Sai
  • Casilda, Raúl San Román Gallego
  • Martinez Cisneros, Cynthia S.
  • Torres, Nieves Ureña
  • Varez, Alejandro
  • Sanchez, Jean Yves
  • Kravchyk, Kostiantyn V.
  • Kovalenko, Maksym V.
  • Teck, Anastasia A.
  • Shiel, Huw
  • Stephens, Ifan E.L.
  • Ryan, Mary P.
  • Zemlyanushin, Eugen
  • Dsoke, Sonia
  • Grieco, Rebecca
  • Patil, Nagaraj
  • Marcilla, Rebeca
  • Gao, Xuan
  • Carmalt, Claire J.
  • He, Guanjie
  • Titirici, Maria Magdalena
Battery technologies based in multivalent charge carriers with ideally two or three electrons transferred per ion exchanged between the electrodes have large promises in raw performance numbers, most often expressed as high energy density, and are also ideally based on raw materials that are widely abundant and less expensive. Yet, these are still globally in their infancy, with some concepts (e.g. Mg metal) being more technologically mature. The challenges to address are derived on one side from the highly polarizing nature of multivalent ions when compared to single valent concepts such as Li+ or Na+ present in Li-ion or Na-ion batteries, and on the other, from the difficulties in achieving efficient metal plating/stripping (which remains the holy grail for lithium). Nonetheless, research performed to date has given some fruits and a clearer view of the challenges ahead. These include technological topics (production of thin and ductile metal foil anodes) but also chemical aspects (electrolytes with high conductivity enabling efficient plating/stripping) or high-capacity cathodes with suitable kinetics (better inorganic hosts for intercalation of such highly polarizable multivalent ions). This roadmap provides an extensive review by experts in the different technologies, which exhibit similarities but also striking differences, of the current state of the art in 2023 and the research directions and strategies currently underway to develop multivalent batteries. The aim is to provide an opinion with respect to the current challenges, potential bottlenecks, and also emerging opportunities for their practical deployment., This work contributes to the research performed at CELEST (Center for Electrochemical Energy Storage Ulm-Karlsruhe) and was partly funded by the German Research Foundation (DFG) under Project ID 390874152 (POLiS Cluster of Excellence). The authors also acknowledge the funding from the European Union's Horizon 2020 research and innovation programme under Grant Agreement No 824066 via the 'E-MAGIC' project., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Bulk MgB2 Superconducting Materials: Technology, Properties, and Applications

  • Prikhna, Tetiana
  • Sokolovsky, Vladimir
  • Moshchil, Viktor
The intensive development of hydrogen technologies has made very promising applications of one of the cheapest and easily produced bulk MgB2-based superconductors. These materials are capable of operating effectively at liquid hydrogen temperatures (around 20 K) and are used as elements in various devices, such as magnets, magnetic bearings, fault current limiters, electrical motors, and generators. These applications require mechanically and chemically stable materials with high superconducting characteristics. This review considers the results of superconducting and structural property studies of MgB2-based bulk materials prepared under different pressure-temperature conditions using different promising methods: hot pressing (30 MPa), spark plasma sintering (16-96 MPa), and high quasi-hydrostatic pressures (2 GPa). Much attention has been paid to the study of the correlation between the manufacturing pressure-temperature conditions and superconducting characteristics. The influence of the amount and distribution of oxygen impurity and an excess of boron on superconducting characteristics is analyzed. The dependence of superconducting characteristics on the various additions and changes in material structure caused by these additions are discussed. It is shown that different production conditions and additions improve the superconducting MgB2 bulk properties for various ranges of temperature and magnetic fields, and the optimal technology may be selected according to the application requirements. We briefly discuss the possible applications of MgB2 superconductors in devices, such as fault current limiters and electric machines., We acknowledge funds from National Academy of Sciences of Ukraine, Project III-7-22 (0785); funds of MICIU/AEI/FEDER for SUPERENERTECH (PID2021–127297OB-C21), FUNFUTURE “Severo Ochoa” (CEX2019–000917-S); MUGSUP (UCRAN20088) project from CSIC scientific cooperation with Ukraine; Catalan Government 2021 SGR 00440; this work is partially supported by the Australian Academy of Science via A. V. Pan’s grant (STV00021Round1) within Ukraine-Australia Research Fund and the Faculty of Engineering and Information Sciences (University of Wollongong, Australia)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Using oxides to compute with heat

  • Nataf, Guillaume F.
  • Volz, Sebastian
  • Ordonez Miranda, Jose
  • Íñiguez, Jorge
  • Rurali, Riccardo
  • Dkhil, Brahim
One of the most innovative possibilities offered by oxides is the use of heat currents for computational purposes. Towards this goal, phase-change oxides, including ferroelectrics, ferromagnets and related materials, could reproduce sources, logic units and memories used in current and future computing schemes., This Comment was cofunded by the European Union (European Research Council (ERC), DYNAMHEAT, No. 101077402; European Program FP7-NMP-LARGE-7, QUANTIHEAT, No. 604668). Views and opinions expressed are, however, those of the authors only and do not necessarily reflect those of the European Union or the ERC. J.Í.-G. acknowledges the funding of the Luxembourg National Research Fund (FNR) through Grant C21/MS/15799044/FERRODYNAMICS. R.R. acknowledges financial support by MCIN/AEI/10.13039/501100011033 under grant PID2020–119777GB-I00, and the Severo Ochoa Centres of Excellence Program under grant CEX2019–000917-S, and by the Generalitat de Catalunya under grant 2021 SGR 01519., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Nanocrystal Assemblies: Current Advances and Open Problems

  • Bassani, Carlos L.
  • Anders, Greg van
  • Banin, Uri
  • Baranov, Dmitry
  • Chen, Qian
  • Dijkstra, Marjolein
  • Dimitriyev, Michael S.
  • Efrati, Efi
  • Faraudo, Jordi
  • Gang, Oleg
  • Gaston, Nicola
  • Golestanian, Ramin
  • Guerrero Garcia, G. Ivan
  • Gruenwald, Michael
  • Haji-Akbari, Amir
  • Ibáñez, Maria
  • Karg, Matthias
  • Kraus, Tobias
  • Lee, Byeongdu
  • Lehn, Reid C. van
  • Macfarlane, Robert J.
  • Mognetti, Bortolo M.
  • Nikoubashman, Arash
  • Osat, Saeed
  • Prezhdo, Oleg V.
  • Rotskoff, Grant M.
  • Saiz, Leonor
  • Shi, An-Chang
  • Skrabalak, Sara
  • Smalyukh, Ivan I.
  • Tagliazucchi, Mario
  • Talapin, Dmitri V.
  • Tkachenko, Alexei V.
  • Tretiak, Sergei
  • Vaknin, David
  • Widmer-Cooper, Asaph
  • Wong, Gerard C.L.
  • Ye, Xingchen
  • Zhou, Shan
  • Rabani, Eran
  • Engel, Michael
  • Travesset, Alex
We explore the potential of nanocrystals (a term used equivalently to nanoparticles) as building blocks for nanomaterials, and the current advances and open challenges for fundamental science developments and applications. Nanocrystal assemblies are inherently multiscale, and the generation of revolutionary material properties requires a precise understanding of the relationship between structure and function, the former being determined by classical effects and the latter often by quantum effects. With an emphasis on theory and computation, we discuss challenges that hamper current assembly strategies and to what extent nanocrystal assemblies represent thermodynamic equilibrium or kinetically trapped metastable states. We also examine dynamic effects and optimization of assembly protocols. Finally, we discuss promising material functions and examples of their realization with nanocrystal assemblies., This research was supported in part by the National Science Foundation under Grant No. NSF PHY-1748958 to the Kavli Institute for Theoretical Physics. The biophysics part of this paper was supported in part by the Gordon and Betty Moore Foundation Grant No. 2919.02. CLB acknowledges the sponsorship of the Alexander von Humboldt Foundation through the Humboldt Research Fellowship for postdoctoral researchers, and the support of the Emerging Talents Initiative (ETI) and the EAM Starting Grant (EAM-SG23-1) of the Competence Center Engineering of Advanced Materials of the Friedrich-Alexander-Universität Erlangen-Nürnberg. CLB and ME acknowledge the support of the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) Project-ID 416229255-SFB 1411. The research of AT was supported by the U.S. Department of Energy (U.S. DOE), Office of Basic Energy Sciences, Division of Materials Sciences and Engineering. Iowa State University operates Ames National Laboratory for the U.S. DOE under Contract DE-AC02-07CH11358., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Chitin Builder: a VMD tool for the generation of structures of chitin molecular crystals for atomistic simulations

  • Malaspina, David C.
  • Faraudo, Jordi
Chitin is the second most abundant organic material in nature after cellulose and its study is now of great interest in the field of biocompatible and eco-friendly materials. Computational studies of natural polymers such as cellulose and chitin are often hindered by the practical difficulties in generating structures suitable for the simulations. This has motivated the recent introduction of a cellulose builder tool that generates coordinate, structure and topology files for atomistic simulations of cellulose crystal polymorphs. Here we present an analogous tool for chitin, the Chitin Builder tool, a program that enhances the Visual Molecular Dynamics (VMD) environment with the ability to generate coordinate and structure files of chitin organic crystals. The program generates Cartesian coordinates and atomic connectivity and structure files for crystalline structures of chitin polymorphs 𝛼 and 𝛽. Crystal structures of any size with or without bonds in the periodic directions can be easily built. The resulting structure is automatically saved in Protein Data Bank (PDB) and Protein Structure Format (PSF) format (used by well-known simulation packages such as NAMD) and it can be easily converted to many other file formats using VMD build-in features., We acknowledge financial support from the Spanish Government through the RTI2018-096273- B-I00 grant and the “Severo Ochoa” Grant CEX2019-000917-S for Research Centres of Excellence awarded to ICMAB. We also thank the Government of Catalonia (AGAUR) for grant 2021SGR01519. D.C. Malaspina was supported by the European Union’s Horizon 2020 research and innovation programme under Marie Sklodowska-Curie grant agreement No 6655919. We acknowledge discussions with Prof. Lars A. Berglund and Dr Yamila Garcia about chitin materials., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

WorMe: A user-oriented software for Caenorhabditis elegans length determination

  • Llobet Lladó, Josep
  • Garriga Alonso, Núria
  • Muñoz Juan, Amanda
  • Laromaine, Anna
Version v2.18.1, Caenorhabditis elegans is a widely used animal model for biomedical research. The length of the nematode is a quantifiable parameter commonly used to assess its development and evaluate its health. Although most measurements are performed manually, software that automates this process exists. However, most available tools are designed for stereomicroscope images, and none work reliably for optical microscopy images. Here, we present WorMe, a user-friendly software that measures C. elegans length in optical microscopy images. The program is versatile in handling various image types, and can analyse multiple images collectively. Furthermore, the user can accept or discard the detected objects, separate joined worms, correct erroneous measurements, and manually add new worms. Then, the length results are presented in a spreadsheet file, with each measurement linked to its image. Graphic data can also be exported., The work has been supported partially with RTI2018-096273-B100, PID2021-122645OB-100 funded by MCIN/AEI//10.13039/501100011033/FEDER “Una manera de hacer Europa”; the “Severo Ochoa” Programme for Centres of Excellence, in R&D CEX2019-000917-S (FUNFUTURE), CEX2023-001263-S (MATRANS42), and European Union’s Horizon Europe research and innovation program under grant agreement No 101057527 (NextGEM). JLL acknowledges ayudas JAE ICU, Consejo Superior de Investigaciones Científicas (CSIC), JAEICU-21-ICMAB01 (2021) in the framework of the Master of Bioinformatics and Biostatistics (UOC, 2021), NGA acknowledges ayudas JAEIntro, Consejo Superior de Investigaciones Científicas (CSIC), JAEINT-24-01745, (2024), AMJ acknowledges the Ph.D. scholarship (FPU18/05190)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Perspectives in power applications of low and mainly high temperature superconductors: energy, transport and industry

  • García-Tabarés, L.
  • Toral, Fernando
  • Munilla, J.
  • González, L.
  • Puig Molina, Teresa
  • Obradors, Xavier
Recent advances in superconducting materials are giving renewed impetus to different power applications, some of which already existed based on previous superconductors with more modest properties while some others have been the symbiosis of new requirements in science and technology and better properties of the new superconductors. This paper constitutes a review of classical and new superconducting materials for power applications (the technological superconductors as they are frequently called) in terms of their structure and their engineering properties (electrical, mechanical and thermal) but also in terms of their manufacturability and scalability for possible scenarios where massive quantities may be required. The second and longer part of the paper is a state of the art of power applications of superconductivity related to energy (generation, transport and transmission), transport (airborne, waterborne and terrestrial) and industrial processes. Practically, all these applications are based on superconducting magnets, which are addressed in the article, including new technologies regarding their design, fabrication and operation. Particularly, these magnets can be the coils of superconducting electrical machines, also described in the paper, where different applications are presented following a scheme of problems to be solved versus the solution provided by superconductivity, including benefits regarding sustainability improvement associated with their better efficiency and power consumption reduction., ICMAB authors acknowledge the Spanish Ministry of Science and Innovation and the European Regional Development Fund, MCIU/AEI/FEDER for SUPERENERTECH (PID2021-127297OB-C21), SUPERPOWER (TED2021-130004B-100), HTS-JOINTS (PDC2022-133208-I00) and FUNFUTURE “Severo Ochoa” Program for Centers of Excellence in R&D (CEX2019-000917-S), EU-COST SUPERQUMAP (CA-21144) and Hi-Scale (CA-19108), the Catalan Government for 2021 SGR 0040 and MATRANS42 (CEX2023-001263-S). CIEMAT authors acknowledge the Spanish Ministry of Science and Innovation for funding MagNext project under 2020 R&D Program, reference PID2020-120582GB-I00, and the PRISMAC program in collaboration with the Spanish Center for Technological and Industrial Development (CDTI) and CERN under contracts KE-3797 and KE-3920. CIEMAT also acknowledges the European Commission for funding the MARES Project (Proposal number 101172746 from the Call HORIZON-CL5-2024-D3-01) and the POSEIDON Project ( Proposal number 101096457 from the call HORIZON-CL5-2022-D5-01)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S). With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Superconducting high-power cables and lines—development status and technology roadmap

  • Noe, Mathias
  • Puig Molina, Teresa
  • Obradors, Xavier
  • Laan, D C. van der
  • Dönges, S.A.
  • Weiss. Jeremy
  • Radcliff, Kyle
  • Cheetham, Peter
  • Pamidi, S.
  • Nguyen, Doan
  • Nguyen, L.N .
  • Bach, R.
  • Mansheim, P.
  • Prinz, R.
  • Willen, Dag
  • Alekseev, Alexander
  • McCullough, K.
  • Hodge, E.
  • Ishmael, Sasha
  • Luke, M.
  • Nilsson, E.
  • Rivenc, J.
  • Rouquette, J.F .
  • Ybanez, Ludovic
  • Tassisto, M.
  • Berg, F.
  • Boukayoua, S.
  • Delarche, A.
  • Dunoyer, F.
  • Chaper, C.
  • Kharche, Swapnil
  • Baroille, J.M .
  • Räch, Carsten
  • Reiser, W.
  • Huwer, Stefan
  • Hanebeck, C.
  • Abrell, P.
  • Chikumoto, N.
  • Saugrain, J.M.
  • Allais, Arnaud
  • Ryu, C.H .
  • Lee, J.Y .
  • Cho, J.W.
  • Zong, X.
  • Wang, B.
  • Allweins, K.
  • Herzog, Friedhelm
  • Dioguardi, F.
  • Xiao, L.
  • Qiu, Q.
  • Arndt, T.
  • Palacios, Sebastian
  • Wehr, Mira
  • Wolf, M.J .
  • Bruzek, Christian Eric
  • Marian, Adela
The energy transition requires a tremendous investment in electric grids, mainly due to electrification of heat and mobility sectors and due to the huge expansion of renewable energy. Superconductors offer an extremely high current density while having no resistance. In the past years, the cost-performance of high-temperature superconducting tapes decreased constantly, and the manufacturing capacity was expanded considerably.In parallel, many AC and DC superconducting cables for various applications from low-voltage up to high-voltage levels have been developed, successfully tested and operated in field tests. The availability of the high-temperature superconducting tapes and the increasing need for network expansion result in an increased interest on the development of superconducting cables.In this paper, the most important and most recent R&D activities on superconducting cables are summarized. The paper is structured in four main parts. Firstly, an introduction is given not only on the history of R&D but also on the high-temperature superconducting materials and conductors. The main part shows some selected R&D projects in more detail, while in the third part common issues relevant to all cables like cooling are discussed. The paper ends with contributions to hybrid superconducting cables, where electricity transport is combined with chemical energy carriers like liquid hydrogen.It can be summarized that several projects demonstrated, that superconducting cables can fulfil all technical requirements for a long-term field operation and first permanent installations are realized. Attractive applications for superconducting cables include electric grids, high-current industry bus bars, data centers and aviation., We acknowledge the European Research Council for the ULTRASUPERTAPE Project (ERC-2014-ADG-669504), IMPACT Project (ERC-2019-PoC-8749) and SMS-INKS (ERC-2022-PoC-101081998), and EU COST actions OPERA (CA20116) and SUPERQUMAP (CA-21144). We also acknowledge the financial support from the Spanish Ministry of Science and Innovation and the European Regional Development Fund, MCIU/AEI/FEDER for SUPERENERTECH (PID2021–127297OB-C21), SUPERPOWER (TED2021-130004B-I00), ‘Severo Ochoa’ Program for Centers of Excellence in R&D (FUNFUTURE CEX2019-000917-S and Matrans42 CEX2023-001263-SCEX), HTS-JOINTS (PDC2022–133208-I00) and PTI + TransEner CSIC programme for Spanish NGEU. The authors also thank the Catalan Government for 2021 SGR 00440., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S). With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed