Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Development of hard X-ray photoelectron spectroscopy in liquid cells using optimized microfabricated silicon nitride membranes

  • Capone, F.|||0000-0002-7354-6317
  • Muntada, O.|||0000-0001-8508-2356
  • Ramírez, J. C.
  • Esplandiu Egido, Maria José|||0000-0003-2079-0639
  • Dedryvère, R.|||0000-0001-5125-640X
  • Grimaud, A.
  • Lassalle-Kaiser, B.|||0000-0003-2141-2496
  • Céolin, D.
  • Pérez Murano, Francesc|||0000-0002-4647-8558
  • Rueff, J.-P.|||0000-0003-3594-918X
  • Fraxedas, Jordi|||0000-0002-2821-4831
We present first hard X-ray photoelectron spectroscopy (HAXPES) results of aqueous salt solutions and dispersions of gold nanoparticles in liquid cells equipped with specially designed microfabricated thin silicon nitride membranes, with thickness in the 15-25 nm range, mounted in a high-vacuum-compatible environment. The experiments have been performed at the HAXPES endstation of the GALAXIES beamline at the SOLEIL synchrotron radiation facility. The low-stress membranes are fabricated from 100 mm silicon wafers using standard lithography techniques. Platinum alignment marks are added to the chips hosting the membranes to facilitate the positioning of the X-ray beam on the membrane by detecting the corresponding photoemission lines. Two types of liquid cells have been used, a static one built on an Omicron-type sample holder with the liquid confined in the cell container, and a circulating liquid cell, in which the liquid can flow in order to mitigate the effects due to beam damage. We demonstrate that the membranes are mechanically robust and able to withstand 1 bar pressure difference between the liquid inside the cell and vacuum, and the intense synchrotron radiation beam during data acquisition. This opens up new opportunities for spectroscopic studies of liquids.
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Digitalization of Battery Manufacturing: Current Status, Challenges, and Opportunities

  • Ayerbe, Elixabete
  • Berecibar, Maitane
  • Clark, Simon
  • Franco, Alejandro A.
  • Ruhland, Janna
As the world races to respond to the diverse and expanding demands for electrochemical energy storage solutions, lithium-ion batteries (LIBs) remain the most advanced technology in the battery ecosystem. Even as unprecedented demand for state-of-the-art batteries drives gigascale production around the world, there are increasing calls for next-generation batteries that are safer, more affordable, and energy-dense. These trends motivate the intense pursuit of battery manufacturing processes that are cost effective, scalable, and sustainable. The digital transformation of battery manufacturing plants can help meet these needs. This review provides a detailed discussion of the current and near-term developments for the digitalization of the battery cell manufacturing chain and presents future perspectives in this field. Current modelling approaches are reviewed, and a discussion is presented on how these elements can be combined with data acquisition instruments and communication protocols in a framework for building a digital twin of the battery manufacturing chain. The challenges and emerging techniques provided here is expected to give scientists and engineers from both industry and academia a guide toward more intelligent and interconnected battery manufacturing processes in the future., E.A., M.B., S.C., A.A.F., and J.R. acknowledge support from the European Union’s Horizon 2020 research and innovation program under grant agreement No. 957213 (BATTERY2030PLUS). E.A., S.C., and A.A.F. acknowledge support from the European Union’s Horizon 2020 research and innovation program under grant agreement No. 957189 (BIG-MAP). E.A. acknowledges support from the European Union’s Horizon 2020 research and innovation program under grant agreement No. 875247 (DEFACTO). A.A.F. acknowledges the European Union’s Horizon 2020 research and innovation program for the funding support through the European Research Council (grant agreement No. 772873, “ARTISTIC” project). A.A.F. acknowledges the Institut Universitaire de France for the support.
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Affordable automated modules for lab-scale high-throughput synthesis of inorganic materials

  • Monterrubio Santín, Iciar
  • Orive, Joseba
  • Ismail, Maha
  • Castillo, Evaristo
  • García, Javier
  • Redondo, Ismael
  • Dauvergne, Jean-Luc
  • Saracibar Ruiz de Ocenda, Amaia
  • Carrasco Rodríguez, Javier
  • Casas Cabanas, Montserrat
  • Reynaud, Marine
The development of sustainable advanced materials is increasingly driven by the need for sustainable, faster, scalable, and more efficient research workflows. Advancements in computational screening, high-throughput experimentation, and artificial intelligence (AI) are accelerating progress in materials discovery. To fully leverage the benefits of these complementary approaches, the implementation of materials acceleration platforms (MAPs) and self-driving laboratories (SDL) has emerged as a promising strategy. Here, we present the development of a semi-automated station for the lab-scale high-throughput synthesis (HTS) of inorganic materials, as part of the Materials Acceleration and Innovation plaTform for ENergy Applications (MAITENA). The system integrates two in-house-designed liquid-handling modules capable of performing sol-gel, Pechini, solid-state, and hydro/solvothermal syntheses. Each module enables the preparation of several dozen gram-scale samples per week with high reproducibility and minimal manual intervention. The system's capabilities are demonstrated through three case studies involving Li-ion battery materials. Results highlight the module's utilization for efficient screening of compositions and synthesis conditions to vary materials’ properties. This accessible and modular infrastructure offers a practical route to implementing high-throughput strategies in inorganic materials research., This work was carried out at CIC energiGUNE (Spain) and was supported through funding from the Spanish Ministerio de Ciencia y Universidades and Agencia Estatal de Investigación (MICIU/ AEI /10.13039/501100011033), FSE invierte en tu futuro, and ERDF/EU through the projects ION-SELF (ref. PID2019-106519RB-I00) and SMART (ref. PID2022-140823OB-I00) and through the PhD grant PRE2020-092978, from the Basque Government through the PhD grant PRE_2021_2_0160 and the program ELKARTEK CICe2025 (ref. KK2025-00054), and from the European Commission’s Horizon 2020 research and innovation programme through the First Stakeholder Initiative of the BIG-MAP project, under grant agreement No 957189.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Implications of the BATTERY 2030+ AI-Assisted Toolkit on Future Low-TRL Battery Discoveries and Chemistries

  • Bhowmik, Arghya
  • Berecibar, Maitane
  • Casas Cabanas, Montse
  • Csanyi, Gabor
  • Dominko, Robert
  • Hermansson, Kersti
  • Palacín, M. Rosa
  • Stein, Helge S.
  • Vegge, Tejs
BATTERY 2030+ targets the development of a chemistry neutral platform for accelerating the development of new sustainable high-performance batteries. Here, a description is given of how the AI-assisted toolkits and methodologies developed in BATTERY 2030+ can be transferred and applied to representative examples of future battery chemistries, materials, and concepts. This perspective highlights some of the main scientific and technological challenges facing emerging low-technology readiness level (TRL) battery chemistries and concepts, and specifically how the AI-assisted toolkit developed within BIG-MAP and other BATTERY 2030+ projects can be applied to resolve these. The methodological perspectives and challenges in areas like predictive long time- and length-scale simulations of multi-species systems, dynamic processes at battery interfaces, deep learned multi-scaling and explainable AI, as well as AI-assisted materials characterization, self-driving labs, closed-loop optimization, and AI for advanced sensing and self-healing are introduced. A description is given of tools and modules can be transferred to be applied to a select set of emerging low-TRL battery chemistries and concepts covering multivalent anodes, metal-sulfur/oxygen systems, non-crystalline, nano-structured and disordered systems, organic battery materials, and bulk vs. interface-limited batteries., The authors acknowledge the European Union's Horizon 2020 research and innovation program under grant agreements no. 957189 (BIG-MAP) and no. 957213 (BATTERY 2030+). K.H. acknowledges the Swedish Research Council (Vetenskapsrådet) and the Swedish national Strategic e-Science programme eSSENCE. R.D. acknowledges the financial support from the Slovenian Research Agency (research core funding P2-0393 and Project N2-0214). H.S.S. acknowledges funding from Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) under Germany's Excellence Strategy—EXC 2154—Project number 390874152. M.C.-C. acknowledges the Spanish Ministerio de Ciencia, Innovación y Universidades (Project reference number: PID2019-107106RB-C33). M.R.P. acknowledges the Spanish Agencia Estatal de Investigación Severo Ochoa Programme for Centres of Excellence in R&D (CEX2019-000917-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Toward a Unified Description of Battery Data

  • Clark, Simon
  • Bleken, Francesca L.
  • Stier, Simon
  • Flores, Eibar
  • Andersen, Casper Welzel
  • Marcinek, Marek
  • Szczesna-Chrzan, Anna
  • Gaberscek, Miran
  • Palacín, M. Rosa
  • Uhrin, Martin
  • Friis, Jesper
Battery research initiatives and giga-scale production generate an abundance of diverse data spanning myriad fields of science and engineering. Modern battery development is driven by the confluence of traditional domains of natural science with emerging fields like artificial intelligence and the vast engineering and logistical knowledge needed to sustain the global reach of battery Gigafactories. Despite the unprecedented volume of dedicated research targeting affordable, high-performance, and sustainable battery designs, these endeavours are held back by the lack of common battery data and vocabulary standards, as well as, machine readable tools to support interoperability. An ontology is a data model that represents domain knowledge as a map of concepts and the relations between them. A battery ontology offers an effective means to unify battery-related activities across different fields, accelerate the flow of knowledge in both human- and machine-readable formats, and support the integration of artificial intelligence in battery development. Furthermore, a logically consistent and expansive ontology is essential to support battery digitalization and standardization efforts, such as, the battery passport. This review summarizes the current state of ontology development, the needs for an ontology in the battery field, and current activities to meet this need., The authors acknowledge BATTERY 2030+ funded by the European Union's Horizon 2020 research and innovation programme under Grant Agreement No. 957213 and the project BIG-MAP with funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 957189., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Perspectives on manufacturing simulations of Li-S battery cathodes

  • Arcelus, Oier
  • Franco, Alejandro A.
Lithium-sulfur batteries (LSBs) are one of the main contenders for next generation post lithium-ion batteries (LIBs). As the process of scientific discovery advances, many of the challenges that prevent the commercial deployment of LSBs, especially at the most fundamental materials level, are slowly being addressed. However, batteries are complex systems that require not only the identifcation of suitable materials, but also require the knowledge of how to assemble and manufacture all the components together in order to obtain an optimally working battery. This is not a simple task, as battery manufacturing is a multi-stepped, multi-parameter, highly correlated process, where many parameters compete, and deep knowledge of the systems is required in order to achieve the optimal manufacturing conditions, which has already been shown in the case of LIBs. In these regards, manufacturing simulations have proven to be invaluable in order to advance in the knowledge of this exciting and technologically relevant field. Thus, in this work, we aim at providing future perspectives and opportunities that we think are interesting in order to create digital twins for the LSB manufacturing process. We also provide comprehensive and realistic ways in which already existing models could be adapted to LSBs in the short-term, and which are the challenges that might be found along the way., A A F, acknowledges the European Union's Horizon 2020 research and innovation programme for the funding support through the European Research Council (Grant Agreement 772873, 'ARTISTIC' project). A A F and O A acknowledge funding from the European Union's Horizon 2020 research and innovation program under Grant Agreement No. 957189 (BIG-MAP). BATTERY 2030+ initiative under Grant Agreement No. 957213 is also acknowledged. A A F acknowledges Institut Universitaire de France for the support. A A F and O A acknowledge the funding from Conseil régional des Hauts de France and the Université Picardie Jules Verne under project name (OPERANDO)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

14 examples of how LLMs can transform materials science and chemistry: a reflection on a large language model hackathon

  • Jablonka, Kevin Maik
  • Ai, Qianxiang
  • Al-Feghali, Alexander
  • Badhwar, Shruti
  • Bocarsly, Joshua D
  • Bran, Andres M
  • Bringuier, Stefan
  • Brinson, L Catherine
  • Choudhary, Kamal
  • Circi, Defne
  • Cox, Sam
  • de Jong, Wibe A
  • Evans, Matthew L
  • Gastellu, Nicolas
  • Genzling, Jerome
  • Gil Matellanes, María Victoria
  • Gupta, Ankur K
  • Hong, Zhi
  • Imran, Alishba
  • Kruschwitz, Sabine
  • Labarre, Anne
  • Lála, Jakub
  • Liu, Tao
  • Ma, Steven
  • Majumdar, Sauradeep
  • Merz, Garrett W
  • Moitessier, Nicolas
  • Moubarak, Elias
  • Mouriño, Beatriz
  • Pelkie, Brenden
  • Pieler, Michael
  • Ramos, Mayk Caldas
  • Ranković, Bojana
  • Rodriques, Samuel G
  • Sanders, Jacob N
  • Schwaller, Philippe
  • Schwarting, Marcus
  • Shi, Jiale
  • Smit, Berend
  • Smith, Ben E
  • Van Herck, Joren
  • Völker, Christoph
  • Ward, Logan
  • Warren, Sean
  • Weiser, Benjamin
  • Zhang, Sylvester
  • Zhang, Xiaoqi
  • Zia, Ghezal Ahmad
  • Scourtas, Aristana
  • Schmidt, K J
  • Foster, Ian
  • White, Andrew D
  • Blaiszik, Ben
Large-language models (LLMs) such as GPT-4 caught the interest of many scientists. Recent studies suggested that these models could be useful in chemistry and materials science. To explore these possibilities, we organized a hackathon. This article chronicles the projects built as part of this hackathon. Participants employed LLMs for various applications, including predicting properties of molecules and materials, designing novel interfaces for tools, extracting knowledge from unstructured data, and developing new educational applications. The diverse topics and the fact that working prototypes could be generated in less than two days highlight that LLMs will profoundly impact the future of our fields. The rich collection of ideas and projects also indicates that the applications of LLMs are not limited to materials science and chemistry but offer potential benefits to a wide range of scientific disciplines., We would like to specifically thank Jim Warren (NIST) for his contributions to discussions leading up to the hackathon and his participation as a judge during the event. We would also like to thank Anthony Costa and Christian Dallago (NVIDIA) for supporting the hackathon. B. B., I. T. F, and Z. H. acknowledge support from the the National Science Foundation awards #2226419 and #2209892. This work was performed under the following financial assistance award 70NANB19H005 from the U.S. Department of Commerce, National Institute of Standards and Technology as part of the Center for Hierarchical Materials Design (CHiMaD). K. J. S, A. S. acknowledge support from the the National Science Foundation award #1931306. K. M. J., S. M., J. v. H., X. Z., B. M., E. M., and B. S. were supported by the MARVEL National Centre for Competence in Research funded by the Swiss National Science Foundation (grant agreement ID 51NF40-182892) and the USorb-DAC Project, which is funded by a grant from The Grantham Foundation for the Protection of the Environment to RMI's climate tech accelerator program, Third Derivative. B. M. was further supported by the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 945363. M. C. R., S. C., and A. D. W. were supported by the National Science Foundation and the National Institute of General Medical Sciences under Grant No. 1764415 and award number R35GM137966, respectively. Q. A.'s contribution to this work was supported by the National Center for Advancing Translational Sciences of the National Institutes of Health under award number U18TR004149. The content is solely the responsibility of the authors and does not necessarily represent the official views of the National Institutes of Health. M. V. G. acknowledges support from the Spanish National Research Council (CSIC) through the Programme for internationalization i-LINK 2021 (Project LINKA20412), and from the Spanish Agencia Estatal de Investigación (AEI) through the Grant TED2021-131693B-I00 funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR” and through the Ramón y Cajal Grant RYC-2017-21937 funded by MCIN/AEI/10.13039/501100011033 and by “ESF Investing in your future”. The project (M. L. E., B. E. S. and J. D. B.) has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement 957189 (DOI: 10.3030/957189), the Battery Interface Genome – Materials Acceleration Platform (BIG-MAP), as an external stakeholder project. M. L. E. additionally thanks the BEWARE scheme of the Wallonia-Brussels Federation for funding under the European Commission's Marie Curie-Skłodowska Action (COFUND 847587). B. E. S. acknowledges support from the UK's Engineering and Physical Sciences Research Council (ESPRC). B. P. acknowledges support from the National Science Foundation through NSF-CBET Grant No. 1917340. The authors thank Phung Cheng Fei, Hassan Harb, and Vinayak Bhat for their helpful comments on this project. D. C. and L. C. B. thank NSF DGE-2022040 for the aiM NRT funding support. K. C. thank the National Institute of Standards and Technology for funding, computational, and data-management resources. Please note certain equipment, instruments, software, or materials are identified in this paper in order to specify the experimental procedure adequately. Such identification is not intended to imply recommendation or endorsement of any product or service by NIST, nor is it intended to imply that the materials or equipment identified are necessarily the best available for the purpose. A. K. G., G. W. M., A. I., and W. A. d. J. were supported by the U.S. Department of Energy, Office of Science, Basic Energy Sciences, Materials Sciences and Engineering Division under Contract No. DE-AC02-05CH11231, FWP No. DAC-LBL-Long, and by the U.S. Department of Energy, Office of Science, Office of High Energy Physics under Award Number DE-FOA-0002705. M. B, B. R., and P. S. were supported by the NCCR Catalysis (grant number 180544), a National Centre of Competence in Research funded by the Swiss National Science Foundation. S. G. R. and J. L. acknowledge the generous support of Eric and Wendy Schmidt, and the core funding of the Francis Crick Institute, which receives its funding from Cancer Research UK, the UK Medical Research Council, and the Wellcome Trust., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Development of hard X-ray photoelectron spectroscopy in liquid cells using optimized microfabricated silicon nitride membranes

  • Capone, F.
  • Muntada, Olga
  • Ramírez, Jéssica Casandra
  • Esplandiú, María J.
  • Dedryvère, R.
  • Grimaud, A.
  • Lassalle-Kaiser, B.
  • Céolin, D.
  • Perez Murano, Francesc X.
  • Rueff, J. P.
  • Fraxedas, J.
We present first hard X-ray photoelectron spectroscopy (HAXPES) results of aqueous salt solutions and dispersions of gold nanoparticles in liquid cells equipped with specially designed microfabricated thin silicon nitride membranes, with thickness in the 15-25 nm range, mounted in a high-vacuum-compatible environment. The experiments have been performed at the HAXPES endstation of the GALAXIES beamline at the SOLEIL synchrotron radiation facility. The low-stress membranes are fabricated from 100 mm silicon wafers using standard lithography techniques. Platinum alignment marks are added to the chips hosting the membranes to facilitate the positioning of the X-ray beam on the membrane by detecting the corresponding photoemission lines. Two types of liquid cells have been used, a static one built on an Omicron-type sample holder with the liquid confined in the cell container, and a circulating liquid cell, in which the liquid can flow in order to mitigate the effects due to beam damage. We demonstrate that the membranes are mechanically robust and able to withstand 1 bar pressure difference between the liquid inside the cell and vacuum, and the intense synchrotron radiation beam during data acquisition. This opens up new opportunities for spectroscopic studies of liquids., This project has received funding from the European Union's Horizon 2020 research and innovation programme, under grant agreement No. 101007417 NFFA-Europe Pilot and the Spanish Ministry of Science and Innovation (MCIN) under contract No. PID2021-124568NB-I00. The ICN2 is funded by the CERCA program/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, grant CEX2021-001214-S, funded by MCIN/AEI. Support through the María de Maeztu grant CEX2023-001397-M funded by MICIU/AEI is acknowledged. We acknowledge funding from Generalitat de Catalunya through the 2021-SGR-00644 project. We also acknowledge the scientific exchange and support of the Centre for Molecular Water Science (CMWS). This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No. 957189. The project is part of BATTERY 2030+, the large-scale European research initiative for inventing the sustainable batteries of the future. We thank SOLEIL for the provision of beam time (proposal Nos. 20220156 and 20230319)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001397-M)., We acknowledge support for the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Development of hard X-ray photoelectron spectroscopy in liquid cells using optimized microfabricated silicon nitride membranes [Dataset]

  • Capone, F.
  • Muntada, Olga
  • Ramírez, Jéssica Casandra
  • Esplandiú, María J.
  • Dedryvère, R.
  • Grimaud, A.
  • Lassalle-Kaiser, B.
  • Céolin, D.
  • Perez Murano, Francesc X.
  • Rueff, J. P.
  • Fraxedas, J.
[Description of methods used for collection/generation of data] Data acquired with a high-kinetic-energy Scienta EW 4000 hemispherical analyser installed on the HAXPES endstation of the GALAXIES beamline of the French national synchrotron facility SOLEIL (France) [Methods for processing the data] CasaXPS software., Original raw data (uncorrected energies) of HAXPES spectra obtained at the HAXPES endstation of the GALAXIES beamline at SOLEIL synchrotron facility (France). Each spectrum is displayed in a two-column format, kinetic energy (X) vs. HAXPES intensity (Y). Photon energies are indicated for each figure., [FIGURE 5] HAXPES raw data of the Au 4f region in kinetic energy (X) vs. intensity (Y) columns of a 40 nm Au film (au_film_40nm), a dispersion of Au nanoparticles on a 25 nm-thick membrane in air (au_np_cell16), a dispersion of Au nanoparticles in MilliQ water (au_np_cell17) and a Au film treated with oxygen plasma and measured with 1486.6 eV photons (au_film_O2_plasma, data from DOI: 10.1021/acs.accounts.8b00241). Photon energy = 5 keV., [FIGURE 6] HAXPES raw and normalized (norm) data of the (a) N 1s, (b) O 1s, (c) C 1s and (d) F 1s lines obtained with 7 keV photons and using 20 nm thick membranes. Liquid cells filled with: air (S2), vacuum (S4), with air and with a ca 5 nm-thick amorphous carbon coating deposited in the inner part of the membrane (S7) and with 60 ml of the LP57 electrolyte (1 M LiPF6 in EC:EMC 3:7) and with the ca 5 nm-thick carbon coating (S6). The formulas used for normalization (heights normalized to their corresponding maxima) are displayed in the corresponding Y columns. In Fig. 6(d) a least-squares fit using the CasaXPS software after a Shirley-type background subtraction using a combination of Gaussian (70%) and Lorentzian (30%) functions under the constraint of identical full width at half-maximum (FWHM) for all components is shown. Raw and corrected kinetic energies are given., [FIGURE 7] HAXPES raw data of the (a) Na 1s region of a 3.5 M NaCl aqueous solution and (b) Cs 3d and (c) Cs 4d lines of a 2.6 M aqueous solution of CsCl obtained with 7 keV photons and using 15 nm membranes., [FIGURE S1] (Top) simulation of the inelastic mean free path (nm) as a function of the kinetic energy in silicon nitride using the TPP-2M model and assuming a 3.44 gr cm-3 density for silicon nitride. (Bottom) Simulated HAXPES spectra assuming a 15 nm thick silicon nitride layer on a CsCl substrate in the 3-10 keV photon energy range., European Union’s Horizon 2020 research and innovation programme, under grant agreement No. 101007417 NFFA-Europe Pilot. Spanish Ministry of Science and Innovation (MCIN) under contract No. PID2021-124568NB-I00. ICN2 is funded by the CERCA program/Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa Centres of Excellence programme, grant CEX2021-001214-S, funded by MCIN/AEI. Support through the Marıa de Maeztu grant CEX2023-001397-M funded by MICIU/AEI is acknowledged. Generalitat de Catalunya through the 2021-SGR-00644 project. European Union’s Horizon 2020 research and innovation programme under grant agreement No. 957189., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001397-M)., File List: Fig_5.xls; Fig_6a.xls, Fig_6b.xls, Fig_6c.xls, Fig_6d.xls, Fig_7.xls, Fig_S1.xls, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

FullProfAPP: a graphical user interface for the streamlined automation of powder diffraction data analysis

  • Arcelus, Oier
  • Rodríguez Carvajal, Juan
  • Katcho, Nebil A.
  • Reynaud, Marine
  • Black, Ashley P.
  • Chatzogiannakis, Dimitrios
  • Frontera, Carlos
  • Serrano Sevillano, Jon
  • Ismail, Maha
  • Carrasco, Javier
  • Fauth, Francois
  • Palacín, M. Rosa
  • Casas Cabanas, Montse
FullProfAPP is a software tool for data processing, refinement and visualization of large collections of powder diffraction patterns. Featuring an intuitive graphical user interface, it seamlessly facilitates a variety of tasks. These include conducting full-profile phase searches, sequential and high-throughput Rietveld refinements, and managing background (and peak) detection. FullProfAPP also provides convenient interaction with crystallographic databases and supports the visualization and export of high-quality pixel and vector graphics depicting the refinement results, among other functionalities. FullProfAPP wraps around the refinement program FullProf [Rodríguez-Carvajal (1993), Physica B, 192, 55–69] and offers the flexibility of user-defined workflows by accessing and editing FullProf’s input files and triggering its execution as necessary. FullProfAPP is distributed as open-source software and is presently available for Windows and Linux operating systems., This work has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No. 957189 (BIG-MAP). The project is part of BATTERY 2030+, the large-scale European research initiative for inventing the sustainable batteries of the future. D. Chatzogiannakis acknowledges the DESTINY MSCA PhD Programme (grant GA 945357). M. Reynaud, J. Carrasco and M. Ismail acknowledge funding from MCIN/AEI/10.13039/ 501100011033 and ‘ESF Investing in your future’ for the R&D&I project ION-SELF PID2019-106519RB-I00, and the PhD grant PRE2020-09297. ICMAB-CSIC members thank the Spanish Agencia Estatal de Investigacio´n Severo Ochoa Programme for Centres of Excellence in R&D (grant No. CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Graph2Mat: universal graph to matrix conversion for electron density prediction

  • Febrer, Pol
  • Jørgensen, Peter Bjørn
  • Pruneda, Miguel
  • García Arribas, Alberto
  • Ordejón, Pablo
  • Bhowmik, Arghya
The electron density is a fundamental observable of an atomic system from which all ground-state properties can be computed. As a prediction target for machine learning (ML) models, electron density is often represented on a dense real space grid, which is data heavy, or through density fitting approximations. In this work, we show the power of targeting the density matrix (DM), a linear-scaling sparse SE(3) equivariant matrix that encodes the exact density. We introduce Graph2Mat, a universal function for converting molecular graphs into equivariant matrices. We demonstrate how a ML model that combines this Graph2Mat approach with state-of-the-art molecular graph representations can accurately predict the DM of molecular systems. The models achieve state-of-the-art performance on electron density prediction by matching the accuracy of grid-based methods, while using datasets that are at least one order of magnitude smaller. Accurately predicted electron densities can also accelerate density functional theory (DFT) calculations by reducing the number of self-consistent field (SCF) iterations needed to converge. In this work, we get an average 40% reduction on the number of SCF steps in DFT calculations of QM9 molecules with SIESTA. The novel prediction model also allows for two new and promising measures of uncertainty (total charge error and self-consistency error) that will facilitate its practical usage, e.g. within active learning workflows. These results open the door for many applications using hybrid ML-accelerated DFT methodologies, and uncertainty aware single iteration ab initio molecular dynamics., PF has received funding from the Project PID2022-139776NB-C62 funded by MCIN/AEI https://doi.org/10.13039/501100011033 ERDF, EU and the Grant PRE2019-089784 funded by MCIN/AEI https://doi.org/10.13039/501100011033 and by ESF Investing in your future. This work has been carried in the framework of the Materials Science PhD Program at Universitat Autònoma de Barcelona (UAB). AB was supported by Independent Research Fund Denmark with project DELIGHT (Grant No. 0217-00326B) TeraBatt project (Grant No. 2035-00232B) and ADANA project (Grant No. 3164-00297B). AG and MP were supported by Grant PID2022-139776NB-C61 of the Spanish MCIN/AEI https://doi.org/10.13039/501100011033, by the ERDF, A way of making Europe, and by Generalitat de Catalunya (Grant 2021SGR01519). AG acknowledges AEI through the Severo Ochoa MaTrans42 (CEX2023-0001263-S) Excellence Centre distinction, and the European High Performance Computing Joint Undertaking under grant Agreement no. 101093374 (Materials design at the exascale), co-funded by AEI PCI2022-134978-2. This project has received funding from the European Union's project Battery Interface Genome—Materials Acceleration Platform: EU-H2020 Grant Agreement ID: 957189. PF, MP, AG and PO acknowledge support from EU MaX CoE (Grant 101093374) and Grants PCI2022-134972-2, PCI2022-134978-2, PID2022-139776NB-C61 and PID2022-139776NB-C62 funded by the Spanish MCIN/AEI https://doi.org/10.13039/501100011033 and by the ERDF, A way of making Europe, and Grant 2021SGR01519 from Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, Grant No. CEX2021-001214-S, funded by MCIN/AEI https://doi.org/10.13039/501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2023-001263-S), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed