Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 33
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Photon upconversion crystals doped bacterial cellulose composite films as recyclable photonic bioplastics

  • Bharmoria, Pankaj|||0000-0001-6573-0475
  • Naimovičius, Lukas|||0000-0002-3358-4108
  • Abol-Fotouh, Deyaa|||0000-0003-4505-5534
  • Miroshnichenko, Mila
  • Lekavičius, Justas
  • De Luca, Gabriele|||0000-0003-3757-3761
  • Saeed, Umair|||0000-0001-7397-9123
  • Kazlauskas, Karolis
  • Candau, Nicolas|||0000-0002-1559-8696
  • Baronas, Pauliu
  • Roig i Serra, Anna|||0000-0001-6464-7573
  • Moth-Poulsen, Kasper|||0000-0003-4018-4927
Biopolymers currently utilized as substitutes for synthetic polymers in photonics applications are predominantly confined to linear optical color responses. Herein we expand their applications in non-linear optics by integrating with triplet-triplet annihilation photon upconversion crystals. A photon upconverting biomaterial is prepared by cultivating Pd(II) meso-tetraphenyl tetrabenzoporphine: 9,10-diphenyl anthracene (sensitizer: annihilator) crystals on bacterial cellulose hydrogel that serves both as host and template for the crystallization of photon upconversion chromophores. Coating with gelatin improves the material's optical transparency by adjusting the refractive indices. The prepared material shows an upconversion of 633 nm red light to 443 nm blue light, indicated by quadratic to linear dependence on excitation power density (non-linearly). Notably, components of this material are physically dis-assembled to retrieve 66 ± 1% of annihilator, at the end of life. Whereas, the residual clean biomass is subjected to biodegradation, showcasing the sustainability of the developed photonics material.
DAU Arxiu Digital de la Universitat Ramon Llull
Publication Artículo científico (JournalArticle)

Bidirectional Photoswitching of a Tailored Azobenzene with Red and Far-Red Light Involving Triplet Sensitization in an Aqueous System

  • Miroshnichenko, Mila
  • Hölzel, Helen
  • Orentas, Edvinas
  • Kazlauskas, Karolis
  • Ferreira, Pedro
  • Dumoulin, Fabienne
  • Alcaide, Carles
  • Solà, Miquel
  • Bresolí-Obach, Roger
  • Nonell, Santi
  • Bharmoria, Pankaj
  • Moth-Poulsen, Kasper
Shifting action spectrum of azobenzene-based photopharmaceuticals toward bio-optical window is highly desired, since red/far-red light offers improved tissue penetration and reduced cellular toxicity. While unidirectional photoswitching (trans-to-cis and cis-to-trans) of azobenzenes (AZO) with red/far-red light is known in separate systems, achieving bidirectional photoswitching in a single system faces issues of spectral overlaps. Here, bidirectional photoswitching of a tailored azobenzene is achieved in a single bio-relevant solution with red and far-red light excitation. A new azobenzene molecule (AZO-N) bearing four ortho-methoxy, and one para-N donor lipophile is synthesized. The AZO-N exhibits separate n-π* absorption bands and triplet energies for trans and cis isomers. As a result, trans-to-cis photoswitching is observed upon 625 nm excitation at the tail of the red-shifted n-π*absorption band via direct absorption, whereas cis-to-trans photoswitching is enabled upon 730 nm excitation through triplet sensitization. Further, triplet sensitization of AZO-based molecules could lead to singlet oxygen generation—experiments in the presence of serum albumin and glutathione (biological oxidative stress addressors), suggest no effect of singlet oxygen on the triplet-sensitization of cis-AZO-N, and non-significant change in the fingerprint all-α secondary structure of serum albumin. This advance presents modular design principles to develop practically functional azo-based photopharmaceuticals., info:eu-repo/semantics/publishedVersion
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Storing energy with molecular photoisomers

  • Wang, Zhihang
  • Erhart, Paul
  • Li, Tao
  • Zhang, Zhao Yang
  • Sampedro, Diego
  • Hu, Zhiyu
  • Wegner, Hermann A.
  • Brummel, Olaf
  • Libuda, Jörg
  • Nielsen, Mogens Brøndsted
  • Moth-Poulsen, Kasper
Some molecular photoisomers can be isomerized to a metastable high-energy state by exposure to light. These molecules can then be thermally or catalytically converted back to their initial state, releasing heat in the process. Such a reversible photochemical process has been considered for developing molecular solar thermal (MOST) systems. In this review, we introduce the concept, criteria, and state-of-the-art of MOST systems, with an emphasis on the three most promising molecular systems: norbornadiene/quadricyclane, E/Z-azobenzene, and dihydroazulene/vinylheptafulvene. After discussing the fundamental working principles, we focus on molecular design strategies for improving solar energy storage performance, remaining challenges, and potential focus areas. Finally, we summarize the current molecular incorporation into functional devices and conclude with a perspective on challenges and future directions., Z.W. and K.M.-P. would like to thank the financial support from K. & A. Wallenberg foundation, the Swedish Foundation for Strategic Research, the Swedish research foundation FORMAS, and the European Union’s Horizon 2020 research and innovation program under grant agreement No. 951801. K.M.-P. acknowledges support from the Catalan Institution for Research and Advanced Studies. P.E. thanks the K. & A. Wallenberg foundation (2014.0226) and the Swedish Research Council (2020-04935). T.L. and Z.-Y.Z. thank the financial support from National Key Research and Development Program of China (2017YFA0207500), National Natural Science Foundation of China (22022507, 51973111), and Beijing National Laboratory for Molecular Sciences (BNLMS202004). D.S. thanks the financial support from MINECO/FEDER (CTQ2017-87372-P). O.B., J.L., and H.A.W. thank the Deutsche Forschungsgemeinschaft (DFG, project 392607742, 62201757). Additional support by the DFG is acknowledged through the Research Unit FOR 1878 “funCOS – Functional Molecular Structures on Complex Oxide Surfaces.” J.L. and O.B. acknowledge the cooperation with the groups of Julien Bachmann, Christian Papp, Andreas Hirsch, Andreas Görling, and Hans-Peter Steinrück in the framework of the studies described in this review. M.B.N. thanks the University of Copenhagen for financial support., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Synthesis, characterization and computational evaluation of bicyclooctadienes towards molecular solar thermal energy storage

  • Quant, Maria
  • Hillers-Bendtsen, Andreas Erbs
  • Ghasemi, Shima
  • Erdelyi, Mate
  • Wang, Zhihang
  • Muhammad, Lidiya M
  • Kann, Nina
  • Mikkelsen, Kurt V.
  • Moth-Poulsen, Kasper
Molecular solar-thermal energy storage (MOST) systems are based on photoswitches that reversibly convert solar energy into chemical energy. In this context, bicyclooctadienes (BODs) undergo a photoinduced transformation to the corresponding higher energy tetracyclooctanes (TCOs), but the photoswitch system has not until now been evaluated for MOST application, due to the short half-life of the TCO form and limited available synthetic methods. The BOD system degrades at higher temperature via a retro-Diels-Alder reaction, which complicates the synthesis of the compounds. We here report a cross-coupling reaction strategy that enables an efficient synthesis of a series of 4 new BOD compounds. We show that the BODs were able to switch to the corresponding tetracyclooctanes (TCOs) in a reversible way and can be cycled 645 times with only 0.01% degradation. Half-lives of the TCOs were measured, and we illustrate how the half-life could be engineered from seconds to minutes by molecular structure design. A density functional theory (DFT) based modelling framework was developed to access absorption spectra, thermal half-lives, and storage energies which were calculated to be 143-153 kJ mol-1 (0.47-0.51 MJ kg-1), up to 76% higher than for the corresponding norbornadiene. The combined computational and experimental findings provide a reliable way of designing future BOD/TCO systems with tailored properties., The project made use of the NMR Uppsala infrastructure, which is funded by the Department of Chemistry-BMC and the Disciplinary Domain of Medicine and Pharmacy. The authors would like to thank the Knut & Alice Wallenberg Foundation, The Swedish Research Council FORMAS, the Swedish Energy Agency, The Swedish Research Council (Vetenskapsrådet) and the European Union's Horizon 2020 Framework Programme under grant agreement number 951801 for financial support., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Chip-scale solar thermal electrical power generation

  • Wang, Zhihang
  • Wu, Zhenhua
  • Hu, Zhiyu
  • Orrego Hernández, Jessica
  • Mu, Erzhen
  • Zhang, Zhao Yang
  • Jevric, Martyn
  • Liu, Yang
  • Fu, Xuecheng
  • Wang, Fengdan
  • Li, Tao
  • Moth-Poulsen, Kasper
There is an urgent need for alternative compact technologies that can derive and store energy from the sun, especially the large amount of solar heat that is not effectively used for power generation. Here, we report a combination of solution- and neat-film-based molecular solar thermal (MOST) systems, where solar energy can be stored as chemical energy and released as heat, with microfabricated thermoelectric generators to produce electricity when solar radiation is not available. The photophysical properties of two MOST couples are characterized both in liquid with a catalytical cycling setup and in a phase-interconvertible neat film. Their suitable photophysical properties let us combine them individually with a microelectromechanical ultrathin thermoelectric chip to use the stored solar energy for electrical power generation. The generator can produce, as a proof of concept, a power output of up to 0.1 nW (power output per unit volume up to 1.3 W m−3). Our results demonstrate that such a molecular thermal power generation system has a high potential to store and transfer solar power into electricity and is thus potentially independent of geographical restrictions., This work was supported by the K. & A. Wallenberg Foundation, the Swedish Foundation for Strategic Research, the Swedish Research Council Formas, the Swedish Energy Agency, the European Research Council (ERC) under grant agreement CoG, PHOTHERM - 101002131, the Catalan Institute of Advanced Studies (ICREA), and the European Union's Horizon 2020 Framework Programme under grant agreement no. 951801. The MEMS-TEG chip manufacture and experimentation were supported by the National Natural Science Foundation of China (grant 51776126). The authors would like to thank the Center for Advanced Electronic Materials and Devices (AEMD) and Instrumental Analysis Center of Shanghai Jiao Tong University (SJTU) and the startup fund of Shanghai Jiao Tong University. We thank Dr. Sarah Lerch and Prof. Ben Greatrex for reading and commenting on the manuscript. We acknowledge Neuroncollective.com and Daniel Spacek for the graphical abstract., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Status and challenges for molecular solar thermal energy storage system based devices

  • Wang, Zhihang
  • Hölzel, Helen
  • Moth-Poulsen, Kasper
Molecular solar thermal energy storage systems (MOST) offer emission-free energy storage where solar power is stored via valence isomerization in molecular photoswitches. These photoswitchable molecules can later release the stored energy as heat on-demand. Such systems are emerging in recent years as a vibrant research field that is rapidly transitioning from basic research to applications. Since a major part of the attention is focused on molecular design and engineering, MOST-based device development has not been systematically summarized and introduced to a broad audience. This tutorial review will discuss the most commonly used and developed devices from a chemical engineering point of view. It is expected that future developers of MOST technology could be inspired by the existing devices, keeping in mind the summarized essential practical challenges towards large-scale implementations and more innovative applications., The authors would like to acknowledge the financial support from the Swedish research foundation FORMAS, the Swedish Energy Agency, Go¨ran Gustafson Foundation, the European Union’s Horizon 2020 research and innovation program under grant agreement No. 951801 and the European Research Council (ERC) through CoG Photherm., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Photolytic Studies of Norbornadiene Derivatives under High-Intensity Light Conditions

  • Kjaersgaard, Alexander
  • Hölzel, Helen
  • Moth-Poulsen, Kasper
  • Nielsen, Mogens Brøndsted
The photoconversion of a norbornadiene (NBD) derivative was studied under high-intensity mono- and polychromatic light conditions at high concentrations. The photoisomerization quantum yield (ϕNBD→QC), proceeding from NBD to its quadricyclane (QC) isomer, was determined using a tunable OPO laser and a solar simulator light source. The solar simulator was designed to mimic the AM1.5G solar spectrum between 300 and 900 nm. Using the OPO laser, ϕNBD→QC was measured at discrete values between 310 and 350 nm in steps of 10 nm, and a variation between 0.81 and 0.96 was observed. Weighting these values of ϕNBD→QC with the spectral profile of the solar simulator, an averaged value of 0.87 ± 0.03 was obtained. Determination of ϕNBD→QC was also performed directly in the solar simulator providing a value of 0.97 ± 0.14, in good agreement with the weighted values from the OPO. Photoisomerization quantum yields were found to decrease slightly at higher concentrations. At high concentrations, we found that correcting for the presence of QC was important due to similar absorption coefficients of the NBD and QC isomers at the absorption tail. Cyclability of the forward and backward NBD/QC conversion was studied over several cycles. The NBD/QC couple exhibited excellent thermal stability, but a slight photodegradation per cycle was observed, increasing with the concentration of the sample. This result indicates that the molecules undergo some intermolecular reactions., The authors are grateful to Prof. H. G Kjaergaard, University of Copenhagen, for fruitful discussions and usage of laboratory instruments. The authors acknowledge funding from the European Commission (H2020-FETPROACT-2019-951801; Molecular Solar-Thermal Energy Storage Systems)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tunable Energy Release in a Reversible Molecular Solar Thermal System

  • Franz, Evanie
  • Stumm, Corinna
  • Waidhas, Fabian
  • Bertram, Manon
  • Jevric, Martyn
  • Orrego-Hernández, Jessica
  • Hölzel, Helen
  • Moth-Poulsen, Kasper
  • Brummel, Olaf
  • Libuda, Jörg
Molecular solar thermal (MOST) systems open application fields for solar energy conversion as they combine conversion, storage, and release in one single molecule. For energy release, catalysts must be controllable, selective, and stable over many operation cycles. Here, we present a MOST/catalyst couple, which combines all these properties. We explore solar energy storage in a tailor-made MOST system (cyano-3-(3,4-dimethoxyphenyl)-norbornadiene/quadricyclane; NBD′/QC′) and the energy release heterogeneously catalyzed at a Au(111) surface. By photoelectrochemical infrared reflection absorption spectroscopy (PEC-IRRAS) and scanning tunneling microscopy, we show that Au triggers the energy release with very high activity. Most remarkably, the release rate of the heterogeneously catalyzed process can be tuned by applying an external potential. Our durability tests show that the MOST/catalyst system is stable over 1000 storage cycles without any decomposition. The surface structure of the catalyst is preserved, and its activity decreases by only 0.1% per storage cycle., The authors acknowledge financial support from the Deutsche Forschungsgemeinschaft (DFG) (392607742) and additional support from the DFG (Collaborative Research Centre SFB 1452 Catalysis at Liquid Interfaces, Research Unit FOR 1878 “Functional Molecular Structures on Complex Oxide Surfaces”, projects 214951840, 322419553). They thank Andreas Leng and Andreas Hirsch for their contributions to the quantitative analysis and Lukas Fromm and Andreas Görling for estimating the particle radius of the NBD′. K.M.P. acknowledges support from the Swedish Research Council FORMAS, the Swedish Energy Agency, and European Union’s Horizon 2020 Framework Programme under grant agreement number 951801 for financial support., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

High throughput screening of norbornadiene/quadricyclane derivates for molecular solar thermal energy storage

  • Elholm, Jacob Lynge
  • Hillers-Bendtsen, Andreas Erbs
  • Hölzel, Helen
  • Moth-Poulsen, Kasper
  • Mikkelsen, Kurt V.
We present a procedure for performing high throughput screening of molecular compounds for molecular solar thermal energy storage devices using extended tight binding (xTB) methods. In order to validate our approach, we performed screening of 3230 norbornadiene/quadricyclane (NBD/QC) derivatives in terms of storage energies, activation barriers and absorption of solar radiation using our approach, and compared it to high level density functional theory (DFT) and cluster perturbation (CP) theory calculations. Our comparisons show that the xTB screening framework correlates very well with DFT and CP theory in that it predicts the same relative trends in the studied parameters although the storage energies and thermal reaction barriers are significantly offset. Utilizing the screening methodology, we have been able to locate compounds that would either be excellent candidates or compounds that should not be considered further for molecular solar thermal energy storage devices. This methodology can readily be extended and applied to screening other molecular motifs for molecular solar energy storage., This work was supported by the Danish Council for Independent Research, DFF-0136-00081B, and the European Union's Horizon 2020 Framework Programme under grant agreement number 951801 for financial support., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Searches for bridged bicyclic molecules in space-norbornadiene and its cyano derivatives

  • Martin-Drumel, Marie-Aline
  • Spaniol, Jean-Thibaut
  • Hölzel, Helen
  • Agúndez, Marcelino
  • Cernicharo, José
  • Moth-Poulsen, Kasper
  • Jacovella, Ugo
The norbornadiene (NBD) molecule, C7H8, owes its fame to its remarkable photoswitching properties that are promising for molecular solar-thermal energy storage systems. Besides this photochemical interest, NBD is a rather unreactive species within astrophysical conditions and it should exhibit high photostability, properties that might also position this molecule as an important constituent of the interstellar medium (ISM)-especially in environments that are well shielded from short-wavelength radiation, such as dense molecular clouds. It is thus conceivable that, once formed, NBD can survive in dense molecular clouds and act as a carbon sink. Following the recent interstellar detections of large hydrocarbons, including several cyano-containing ones, in the dense molecular cloud TMC-1, it is thus logical to consider searching for NBD-which presents a shallow but non-zero permanent electric dipole moment (0.06 D)-as well as for its mono- and dicyano-substituted compounds, referred to as CN-NBD and DCN-NBD, respectively. The pure rotational spectra of NBD, CN-NBD, and DCN-NBD have been measured at 300 K in the 75-110 GHz range using a chirped-pulse Fourier-transform millimetre-wave spectrometer. Of the three species, only NBD was previously studied at high resolution in the microwave domain. From the present measurements, the derived spectroscopic constants enable prediction of the spectra of all three species at various rotational temperatures (up to 300 K) in the spectral range mapped at high resolution by current radio observatories. Unsuccessful searches for these molecules were conducted toward TMC-1 using the QUIJOTE survey, carried out at the Yebes telescope, allowing derivation of the upper limits to the column densities of 1.6 × 1014 cm-2, 4.9 × 1010 cm-2, and 2.9 × 1010 cm-2 for NBD, CN-NBD, and DCN-NBD, respectively. Using CN-NBD and cyano-indene as proxies for the corresponding bare hydrocarbons, this indicates that-if present in TMC-1-NBD would be at least four times less abundant than indene., The work at ISMO was performed using HPC resources from the “Mésocentre” computing center of CentraleSupélec and École Normale Supérieure Paris-Saclay supported by CNRS and Région Île-de-France (https://mesocentre.centralesupelec.fr/). It has also been supported by the Région Ile-de-France, through DIM-ACAV+, from the Agence Nationale de la Recherche (ANR-19-CE30-0017-01), and from the Programme National “Physique et Chimie du Milieu Interstellaire” (PCMI) of CNRS/INSU with INC/INP co-funded by CEA and CNES. The work at Chalmers was funded by the European Research Council (ERC) under grant agreement CoG, PHOTHERM – 101002131, the Catalan Institute of Advanced Studies (ICREA), and the European Union's Horizon 2020 Framework Programme under grant agreement no. 951801. We thank Anders Lennartsson for his help with the synthesis of CN-NBD., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Triplet-triplet annihilation mediated photon upconversion solar energy systems

  • Naimovičius, Lukas
  • Bharmoria, Pankaj
  • Moth-Poulsen, Kasper
Solar energy harvesting is among the best solutions for a global transition toward carbon-neutral energy technologies. The existing solar energy harvesting technologies like photovoltaics (PV) and emerging molecular concepts such as solar fuels and molecular solar thermal energy storage (MOST) are rapidly developing. However, to realize their full potential, fundamental solar energy loss channels like photon transmission, recombination, and thermalization need to be addressed. Triplet-triplet annihilation mediated photon upconversion (TTA-UC) is emerging as a way to overcome losses due to the transmission of photons below the PV/chromophore band gap. However, there are several challenges related to the integration of efficient solid-state TTA-UC systems into efficient devices such as: wide band absorption, materials sustainability, and device architecture. In this article, we review existing work, identify and discuss challenges as well as present our perspective toward possible future directions., L. N. acknowledges Erasmus+ Traineeship Program, P. B. acknowledges La-Caixa junior research leadership-post doctoral program (ID: 100010434, fellowship code: LCF/BQ/P122/11910023). K. M. P. acknowledges funding from the European Research Council (No. 101002131), the Swedish Energy Agency, the Göran Gustafsson Foundation, the Swedish Research Council, Swedish Research Council Formas, the European Research Council (ERC) under grant agreement CoG, PHOTHERM – 101002131, the Catalan Institute of Advanced Studies (ICREA), and the European Union's Horizon 2020 Framework Programme under grant agreement no. 951801., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The statistical probability factor in triplet mediated photon upconversion: a case study with perylene

  • Naimovičius, Lukas
  • Radiunas, Edvinas
  • Dapkevičius, Manvydas
  • Bharmoria, Pankaj
  • Moth-Poulsen, Kasper
  • Kazlauskas, Karolis
Triplet-triplet annihilation photon upconversion (TTA-UC) is a process where two low-energy photons are converted into one higher-energy photon. A crucial component for an efficient upconversion process is the statistical probability factor (f), defined as the probability of the formation of a high-energy singlet state upon coupling of two low-energy triplet states. Theoretically, f depends on the energy level distribution, molecular orientation, inter-triplet exchange coupling of triplet dyads, and spin-mixing of resulting spin states (singlet, triplet, and quintet). However, experimental values of f for acene-based annihilators have been subject to large variations due to many factors that have resulted in the reporting of different f values for the same molecule. In this work, we discuss these factors by studying perylene as a case study annihilator, for which by far the largest variation in f = 16 to 100% has been reported. We systematically investigated the TTA-UC of PdTPBP:perylene, as a sensitizer-annihilator pair and obtained the experimental f = 17.9 ± 2.1% for perylene in THF solution. This limits the maximum TTA-UC quantum yield to 9.0% (out of 50%) for this annihilator. We found that such a low f value for perylene is largely governed by the energy-gap law where higher non-radiative losses due to the small energy gap between 2 × T1 and T2 affect the probability of singlet formation. Interestingly, we found this observation true for other acene-based annihilators whose emission ranges from the UV to the yellow region, thus providing a blueprint for future design of efficient TTA-UC systems., L. N. acknowledges Erasmus+ Traineeship Program, and P. B. acknowledges La-Caixa junior research leadership-post doctoral program (ID: 100010434, fellowship code: LCF/BQ/P122/11910023). K. M. P. acknowledges funding from the European Research Council (No. 101002131), the Swedish Energy Agency, the Göran Gustafsson Foundation, the Swedish Research Council, Swedish Research Council Formas, the European Research Council (ERC) under grant agreement CoG, PHOTHERM – 101002131, the Catalan Institute of Advanced Studies (ICREA), and the European Union's Horizon 2020 Framework Programme under grant agreement no. 951801. The research at Vilnius University was funded under the “Universities’ Excellence Initiative” program., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Unveiling the Potential of Heterogeneous Catalysts for Molecular Solar Thermal Systems

  • Giménez Gómez, Alberto
  • Rollins, Benjamin
  • Steele, Andrew
  • Hölzel, Helen
  • Baggi, Nicolò
  • Moth-Poulsen, Kasper
  • Funes Ardoiz, Ignacio
  • Sampedro, Diego
Solar energy utilization has gained considerable attention due to its abundance and renewability. However, its intermittent nature presents a challenge in harnessing its full potential. The development of energy storing compounds capable of capturing and releasing solar energy on demand has emerged as a potential solution. These compounds undergo a photochemical transformation that results in a high-energy metastable photoisomer, which stores solar energy in the form of chemical bonds and can release it as heat when required. Such systems are referred to as MOlecular Solar Thermal (MOST)-systems. Although the photoisomerization of MOST systems has been vastly studied, its back-conversion, particularly using heterogeneous catalysts, is still underexplored and the development of effective catalysts for releasing stored energy is crucial. Herein we compare the performance of 27 heterogeneous catalysts releasing the stored energy in an efficient Norbornadiene/Quadricyclane (NBD/QC) MOST system. We report the first benchmarking of heterogeneous catalysts for a MOST system using a robust comparison method of the catalysts' activity and monitoring the conversion using UV-Visible (UV-Vis) spectroscopy. Our findings provide insights into the development of effective catalysts for MOST systems. We anticipate that our assay will reveal the necessity of further investigation on heterogeneous catalysis., We thank the European Union's H2020 research and innovation program under grant agreement N:951801 (MOST H2020-EIC-FETPROACT-2019-951801). Some results are part of the project TED2021-131896B-I00 financed by MCIN/AEI/10.13039/501100011033 and the European Union “Next Generation EU”/PRTR. I. F.-A. thanks the MICINN of Spain for financial support (IJC2020-045125-I). As part of the FETPROACT MOST project, all catalysts tested were provided by Johnson Matthey (JM)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Flow-Integrated Preparation of Norbornadiene Precursors for Solar Thermal Energy Storage

  • Baggi, Nicolò
  • Hölzel, Helen
  • Schomaker, Hannes
  • Moreno, Kevin
  • Moth-Poulsen, Kasper
Molecular solar thermal (MOST) energy storage systems are getting increased attention related to renewable energy storage applications. Particularly, 2,3-difunctionalized norbornadiene-quadricyclane (NBD-QC) switches bearing a nitrile (CN) group as one of the two substituents are investigated as promising MOST candidates thanks to their high energy storage densities and their red-shifted absorbance. Moreover, such NBD systems can be prepared in large quantities (a requirement for MOST-device applications) in flow through Diels-Alder reaction between cyclopentadiene and appropriately functionalized propynenitriles. However, these acetylene precursors are traditionally prepared in batch from their corresponding acetophenones using reactive chemicals potentially leading to health and physical hazards, especially when working on a several-grams scale. Here, we develop a multistep flow-chemistry route to enhance the production of these crucial precursors. Furthermore, we assess the atom economy (AE) and the E-factor showing improved green metrics compared to classical batch methods. Our results pave the way for a complete flow synthesis of NBDs with a positive impact on green chemistry aspects., The authors acknowledge funding from the European Commission (H2020-FETPROACT-2019-951801; Molecular Solar-Thermal Energy Storage Systems) and the European Research Council (ERC) under grant agreement CoG, PHOTHERM – 101002131. The authors would like to also acknowledge the financial support from the Göran Gustafsson Foundation, the Swedish Research Council, and the Catalan Institute of Advanced Studies (ICREA)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Synthesis and Characterization of Carbon-Based Heterogeneous Catalysts for Energy Release of Molecular Solar Thermal Energy Storage Materials

  • Magson, Lucien
  • Hölzel, Helen
  • Aslam, Adil S.
  • Henninger, Stefan
  • Munz, Gunther
  • Moth-Poulsen, Kasper
  • Knaebbeler-Buss, Markus
  • Funes Ardoiz, Ignacio
  • Sampedro, Diego
Molecular solar thermal energy storage (MOST) systems are rapidly becoming a feasible alternative to energy storage and net-zero carbon emission heating. MOST systems involve a single photoisomerization pair that incorporates light absorption, storage, and heat release processes in one recurring cycle. Despite significant recent advancements in the field, the catalytic back-reaction from MOST systems remains relatively unexplored. A wide range of applications is possible, contingent on the energy densities of the specific photoisomers. Here, we report platinum-, copper-, and nickel-based heterogeneous catalysts screened in batch conditions for the back-conversion reaction on the cyano-3-(4-methoxyphenyl)-norbornadiene/quadricyclane pair. Catalyst reactivities are investigated using structural characterization, imaging techniques, and spectroscopic analysis. Finally, the thermal stability is also explored for our best-performing catalysts., We thank the European Union’s H2020 research and innovation program under grant agreement no. 951801 (MOST H2020-EIC-FETPROACT-2019-951801). I.F.-A. thanks the “Ministerio de Ciencia e Innovación” for the Juan de la Cierva-Incorporation scholarship (IJC2020-045125-I). K.M.-P. thanks the ERC (PHOTHERM), Göran Gustafson Foundation, and Swedish Energy Agency. Also, we would like to thank Philipp Hügenell – Fraunhofer ISE (physisorption and DVS), Jutta Zielonka (SEM) – Fraunhofer ISE, Thomas Hausmann (DSC) – Fraunhofer ISE, and Félix Gallarta Gonzalez (AAS) – Universidad de la Rioja., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Hybrid solar energy device for simultaneous electric power generation and molecular solar thermal energy storage

  • Wang, Zhihang
  • Hölzel, Helen
  • Fernandez, Lorette
  • Aslam, Adil S.
  • Baronas, Paulius
  • Orrego-Hernández, Jessica
  • Ghasemi, Shima
  • Campoy Quiles, Mariano
  • Moth-Poulsen, Kasper
The performance of photovoltaic (PV) solar cells can be adversely affected by the heat generated from solar irradiation. To address this issue, a hybrid device featuring a solar energy storage and cooling layer integrated with a silicon-based PV cell has been developed. This layer employs a molecular solar thermal (MOST) energy storage system to convert and store high-energy photons—typically underutilized by solar cells due to thermalization losses—into chemical energy. Simultaneously, it effectively cools the PV cell through both optical effects and thermal conductivity. Herein, it was demonstrated that up to 2.3% of solar energy could be stored as chemical energy. Additionally, the integration of the MOST system with the PV cell resulted in a notable decrease in the cell’s surface temperature by approximately 8°C under standard solar irradiation conditions. The hybrid system demonstrated a solar utilization efficiency of 14.9%, underscoring its potential to achieve even greater efficiencies in forthcoming advanced hybrid PV solar energy systems., This work was supported by the European Research Council (no. 101002131), the Swedish Energy Agency, the Göran Gustafsson Foundation, the Swedish Research Council (project. 2020-00686), Swedish Research Council Formas, the European Research Council (ERC) under grant agreement CoG, PHOTHERM—101002131, the Catalan Institute of Advanced Studies (ICREA), and the European Union’s Horizon 2020 Framework Programme under grant agreement no. 951801. The authors are very grateful to Dr. Pedro Ferreira for help on the indoor experiments test, Dr. Marti Gibert Roca for designing and manufacturing the holder with temperature control for PV measurements, and Miquel Casademont Viñas for introducing the solar simulator in the Institute of Materials Science of Barcelona. The Spanish Ministerio de Ciencia e Innovación (MICINN) is gratefully acknowledged for its support through grant no. CEX2023-001263-S in the framework of the Spanish Severo Ochoa Centre of Excellence program and the AEI/FEDER (UE) grant PID2021-128924OB-I00 (ISOSCELLES)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Pyrene Functionalized Norbornadiene-Quadricyclane Fluorescent Photoswitches: Characterization of their Spectral Properties and Application in Imaging of Amyloid Beta Plaques

  • Ghasemi, Shima
  • Shamsabadi, Monika
  • Olesund, Axel
  • Najera, Francisco
  • Erbs Hillers-Bendtsen, Andreas
  • Edhborg, Fredrik
  • Aslam, Adil S.
  • Larsson, Wera
  • Wang, Zhihang
  • Amombo Noa, Francoise M.
  • Salthouse, Rebecca Jane
  • Öhrström, Lars
  • Hölzel, Helen
  • Perez Inestrosa, E.
  • Mikkelsen, Kurt V.
  • Hanrieder, Jörg
  • Albinsson, Bo
  • Dreos, Ambra
  • Moth-Poulsen, Kasper
This study presents the synthesis and characterization of two fluorescent norbornadiene (NBD) photoswitches, each incorporating two conjugated pyrene units. Expanding on the limited repertoire of reported photoswitchable fluorescent NBDs, we explore their properties with a focus on applications in bioimaging of amyloid beta (Aβ) plaques. While the fluorescence emission of the NBD decreases upon photoisomerization, aligning with what has been previously reported, for the first time we observed luminescence after irradiation of the quadricyclane (QC) isomer. We deduce how the observed emission is induced by photoisomerization to the excited state of the parent isomer (NBD) which is then the emitting species. Thorough characterizations including NMR, UV-Vis, fluorescence, X-ray structural analysis and density functional theory (DFT) calculations provide a comprehensive understanding of these systems. Notably, one NBD-QC system exhibits exceptional durability. Additionally, these molecules serve as effective fluorescent stains targeting Aβ plaques in situ, with observed NBD/QC switching within the plaques. Molecular docking simulations explore NBD interactions with amyloid, unveiling novel binding modes. These insights mark a crucial advancement in the comprehension and design of future photochromic NBDs for bioimaging applications and beyond, emphasizing their potential in studying and addressing protein aggregates., The following agencies are acknowledged for financing the presented work: Spanish Ministerio de Ciencia e Innovación (grant PID2022-136705NB−I00; Proyectos de I+D+I Programación Conjunta Internacional, Euro-NanoMed 2019 (PCI2019-111825-2); International Postdoc Grant of the Swedish Research Council VR (#2021-00478); Swedish Energy Agency; the Göran Gustafsson Foundation; the Swedish Research Council; the Chalmers Foundation; Swedish Research Council Formas; the European Research Council (ERC) under grant agreement CoG, PHOTHERM – 101002131; the Catalan Institute of Advanced Studies (ICREA); and the European Union's Horizon2020 Framework Programme under grant agreement no. 951801., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Norbornadiene-Quadricyclane Photoswitches with Enhanced Solar Spectrum Match

  • Aslam, Adil S.
  • Muhammad, Lidiya M.
  • Erbs Hillers-Bendtsen, Andreas
  • Mikkelsen, Kurt V.
  • Moth-Poulsen, Kasper
Herein, we report monomeric and dimeric norbornadiene-quadricyclane molecular photoswitch systems intended for molecular solar thermal applications. A series of six new norbornadiene derivatives conjugated with benzothiadiazole as the acceptor unit and dithiafulvene as the donor unit were synthesized and fully characterized. The photoswitches were evaluated by experimentally and theoretically measuring optical absorption profiles and thermal conversion of quadricyclane to norbornadiene. Computational insight by density functional theory calculations at the M06-2X/def2-SVPD level of theory provided geometries, storage energies, UV-vis absorption spectra, and HOMO-LUMO levels that are used to describe the function of the molecular systems. The studied molecules exhibit absorption onset ranging from 416 nm to 595 nm due to a systemic change in their donor-acceptor character. This approach was advantageous due to the introduction of benzothiadiazole and the dimeric nature of molecular structures. The best-performing system has a half-life of 3 days with quantum yields over 50 %., This work was supported by the Swedish Energy Agency, the Göran Gustafsson Foundation, the Swedish Research Council, Swedish Research Council Formas, the European Research Council (ERC) under grant agreement CoG, PHOTHERM-101002131, the Catalan Institute of Advanced Studies (ICREA), and the European Union's Horizon 2020 Framework Programme under grant agreement no. 951801 MOST, European Commission (Grant No.765739), the Danish Council for Independent Research, DFF-0136-00081B., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Exploring ortho-dianthrylbenzenes for molecular solar thermal energy storage

  • Baggi, Nicolò
  • Muhammad, Lidiya M.
  • Liasi, Zacharias
  • Elholm, Jacob Lynge
  • Baronas, Paulius
  • Molins, Elies
  • Mikkelsen, Kurt V.
  • Moth-Poulsen, Kasper
Molecular solar thermal systems, which absorb light, store it, and release it as heat, have been extensively researched, yet many potential candidates remain unexplored. To expand this range, five specifically designed ortho-dianthrylbenzenes were investigated. Anthracene dimers have been underexplored due to issues like photooxidation and varying photodimerization efficiency. The presented systems address these challenges by aryl-linking two anthracene moieties, achieving photodimerization quantum yields ranging from 11.5% to 16% in mesitylene. The impact of donor or acceptor groups on energy storage time (9-37 years), energy storage density (0.14-0.2 MJ kg-1), and solar energy storage efficiency (0.38-0.66%) was evaluated. The experimental results, supported by density functional theory-based modeling, highlight the potential of anthracene-based photoswitches for molecular solar thermal applications and encourage further exploration of similar systems., Funding from the European Commission (H2020-FETPROACT-2019-951801; Molecular Solar Thermal Energy Storage Systems) and the European Research Council (ERC) under grant agreement CoG, PHOTHERM– 101002131 is acknowledged by the authors. The authors would like to also acknowledge the financial support from the Göran Gustafsson Foundation, the Swedish Research Council, the Spanish Ministry for Science and Innovation (project LIPCES, PID2021-123873NB-I00) and the Catalan Institute of Advanced Studies (ICREA). K. V. M. acknowledges the Danish Council for Independent Research, DFF-0136-00081B, DFF-10.46540/3103-00261B and the European Union's Horizon 2020 Framework Programme under grant agreement number 951801 for financial support. E. M. acknowledges financial support from the State Investigation Agency (PID2021-124572OB-C32), and through the Severo Ochoa Programme for Centres of Excellence in R&D (CEX2023-001263-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Two-way photoswitching norbornadiene derivatives for solar energy storage

  • Fei, Liang
  • Hölzel, Helen
  • Wang, Zhihang
  • Hillers-Bendtsen, Andreas Erbs
  • Aslam, Adil S.
  • Shamsabadi, Monika
  • Tan, Jialing
  • Mikkelsen, Kurt V.
  • Wang, Chaoxia
  • Moth-Poulsen, Kasper
Molecular photoswitches of norbornadiene (NBD) derivatives have been effectively applied in molecular solar-thermal energy storage (MOST) by photoisomerization of NBD to a quadricyclane (QC) state. However, a challenge of the NBD-based MOST system is the lack of a reversible two-way photoswitching process, limiting conversion from QC to thermal and catalytic methods. Here we design a series of NBD derivatives with a combination of acceptor and donor units to achieve two-way photoswitching, which can optically release energy by back-conversion from QC to NBD. Highly efficient photoconversion yields from NBD to QC and QC to NBD are up to 99% and 82%, respectively. The energy storage density of two-way photoswitching NBD is up to 312 J g-1 and optically controlled two-way photoswitching devices are demonstrated for the first time both in flow and in thin films, which illustrate a promising approach for fast and robust energy release in both solution and solid state., The authors acknowledge financial support from the European Commission (H2020-FETPROACT-2019-951801; Molecular Solar-Thermal Energy Storage Systems), the European Research Council (ERC) under grant agreement CoG, PHOTHERM – 101002131, the Göran Gustafsson Foundation, the Swedish Research Council, the Catalan Institute of Advanced Studies (ICREA), the National Natural Science Foundation of China (21975107), and the China Scholarship Council (202006790096)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Photon upconversion crystals doped bacterial cellulose composite films as recyclable photonic bioplastics

  • Bharmoria, Pankaj
  • Naimovičius, Lukas
  • Abol-Fotouh, Deyaa
  • Miroshnichenko, Mila
  • Lekavičius, Justas
  • Luca, Gabriele de
  • Saeed, Umair
  • Kazlauskas, Karolis
  • Candau, Nicolas
  • Baronas, Paulius
  • Roig Serra, Anna
  • Moth-Poulsen, Kasper
Biopolymers currently utilized as substitutes for synthetic polymers in photonics applications are predominantly confined to linear optical color responses. Herein we expand their applications in non-linear optics by integrating with triplet-triplet annihilation photon upconversion crystals. A photon upconverting biomaterial is prepared by cultivating Pd(II) meso-tetraphenyl tetrabenzoporphine: 9,10-diphenyl anthracene (sensitizer: annihilator) crystals on bacterial cellulose hydrogel that serves both as host and template for the crystallization of photon upconversion chromophores. Coating with gelatin improves the material's optical transparency by adjusting the refractive indices. The prepared material shows an upconversion of 633 nm red light to 443 nm blue light, indicated by quadratic to linear dependence on excitation power density (non-linearly). Notably, components of this material are physically dis-assembled to retrieve 66 ± 1% of annihilator, at the end of life. Whereas, the residual clean biomass is subjected to biodegradation, showcasing the sustainability of the developed photonics material., This work was developed within the scope of the La-Caixa Junior Research Leadership-Post Doctoral Project PHOLCEB (ID: 100010434, fellowship code: LCF/BQ/P122/11910023). P.B. and M.M. acknowledge La-Caixa Foundation and the State Investigation Agency, through the Severo Ochoa Program for Centres of Excellence in R&D (CEX2023-001263-S) and Project PID2021-123873NB-I00 for financial support. K.M.P. acknowledges funding from the European Research Council (No. 101002131), the Swedish Energy Agency, the Göran Gustafsson Foundation, the Swedish Research Council, Swedish Research Council Formas, the European Research Council (ERC) under Grant Agreement CoG, PHOTHERM—101002131, the Catalan Institute of Advanced Studies (ICREA) and the European Union’s Horizon 2020 Framework Program under Grant Agreement No. 951801. L.N. acknowledges Erasmus+ Traineeship Program. J.L. and K.K. acknowledge the “Universities’ Excellence Initiative” program by the Ministry of Education, Science and Sports of the Republic of Lithuania under the agreement with the Research Council of Lithuania (Project No. S-A-UEI-23-6). A.R. acknowledges Grants PID2021-122645OB-I00 and CEX2019-000917 (“Severo Ochoa” Program for Center of Excellence in R&D) funded by MCIN/AEI/10.13039/501100011033 and by FEDER, “A way of making Europe”, and The Generalitat de Catalunya with Grant No. 2021SGR00446. N.C. acknowledges the group eb-POLICOM/Polímers i Compòsits Ecològics i Biodegradables, a research group of the Generalitat de Catalunya (Grant 2021 SGR 01042). D.A.F. is grateful to the Egyptian Ministry of Higher Education and Scientific Research for his post-doctoral grant. G.D.L. acknowledges funding from the Grant RYC2021-032524-I funded by MCIN/AEI/10.13039/501100011033 and by “European Union NextGenerationEU”/PRTR. G.D.L and U.S. acknowledge Prof. G. Catalan for the use of the LCR meter., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Design, testing and characterization of noble-metal catalysts for the heat-release reaction of a molecular solar thermal energy storage isomer pair

  • Rollins, Benjamín
  • Giménez Gómez, Alberto
  • Steele, Andrew M.
  • Salthouse, Rebecca J.
  • Moreno, Kevin
  • Moth-Poulsen, Kasper
  • Funes Ardoiz, Ignacio
  • Sampedro, Diego
MOlecular Solar Thermal systems (MOST) are a promising technology to store solar energy in chemical bonds. The heat release from the charged isomers requires an efficient catalysed reaction to deliver its energy on demand. Herein, a series of heterogeneous catalysts featuring varied metal centres and supports was synthesised and evaluated for the thermal back-conversion reaction of one of the most advanced MOST systems, based on the norbornadiene/quadricyclane photoswitch pair. The catalysts were characterised to understand the effects that influence performance. Two key findings were made. Firstly, the best performing catalysts were those where the metal centres were in a metallic state as opposed to being oxidized. Some metals oxidise more readily on alumina than on activated carbon, and therefore, for these metals, the choice of support has a significant effect. Secondly, catalysts with very low loading had disproportionately high activity compared with higher-loading catalysts. This seems to be due to the presence of highly active and highly dispersed particles at low loading, which are much more active than the larger particles that readily form at higher loadings., This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 951801. The authors would like to acknowledge Jason Raymond, Lia JaKyung Murfin, Mark S'ari, Edward Bilbé and Riho T. S. Green from the Advanced Characterization Department at the Johnson Matthey Technology Centre. A. G. G., D. S. and I. F.-A. acknowledge also the projects PID2021-126075NB-I00 and TED2021-131896B-I00 financed by MCIN/AEI/10.13039/501100011033 and the European Union “Next Generation EU”/PRTR. I. F.-A. thanks the MICINN of Spain for financial support (RYC2022-035776-I). K. M.-P. thanks the Catalan Institution for Research & Advanced Studies, ICREA for financial support., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tuning Electrocatalytic Energy Release in Norbornadiene Based Molecular Solar Thermal Systems Through Substituent Effects

  • Franz, Evanie
  • Oberhof, Nils
  • Krappmann, Daniel
  • Baggi, Nicolò
  • Hussain, Zarah
  • Moth-Poulsen, Kasper
  • Hölzel, Helen
  • Hirsch, Andreas
  • Dreuw, Andreas
  • Brummel, Olaf
  • Libuda, Jörg
Molecular solar thermal (MOST) systems, such as the norbornadiene/quadricyclane (NBD/QC) pair, combine solar energy conversion, storage, and release in a simple one-molecule process. The energy-releasing reaction QC to NBD can be controlled electrochemically. In this study, we used in-situ photoelectrochemical infrared spectroscopy (PEC-IRRAS) together with density functional theory (DFT) calculations to investigate how electron donating (EDG) and electron withdrawing (EWG) groups in the push-pull system of the MOST pair affect the electrocatalytic properties of the electrochemically triggered back-conversion. Specifically, we investigated cyano, tosyl, and methyl ester groups as EWGs, and methoxy, dimethylamine, thioether, and diphenylamine groups located in the para-position of a phenyl group as EDGs. We characterized the onset potential, electrochemical stability window, and selectivity. We found that these properties strongly depend on the strength of electron donation of the EDG, as it exclusively locates the highest occupied molecular orbital (HOMO) and raises its energy level. We obtained the highest selectivity for compounds with p-methoxyphenyl functionality., The authors acknowledge financial support by the Deutsche Forschungsgemeinschaft (DFG) Research Unit FOR 5499 “Molecular Solar Energy Management” (project 496207555) and additional support by the DFG (Collaborative Research Centre SFB 1452 – Catalysis at Liquid Interfaces and further projects 392607742, 431733372, 453560721). Further the authors acknowledge funding from the European Commission (H2020-FETPROACT-2019–951801; Molecular Solar Thermal Energy Storage Systems) and the European Research Council (ERC) under grant agreement CoG, PHOTHERM– 101002131. Open access funding enabled and organized by Projekt DEAL., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Surfactant-enabled strategy for molecular solar thermal energy storage systems in water

  • Fernandez, Lorette
  • Hölzel, Helen
  • Ferreira, Pedro
  • Baggi, Nicolò
  • Moreno, Kévin
  • Wang, Zhihang
  • Moth-Poulsen, Kasper
Molecular solar thermal energy storage (MOST) systems, which absorb sunlight, store this energy in chemical bonds, and release it as heat, are receiving increasing attention in renewable energy storage applications. Among the norbornadiene/quadricyclane (NBD/QC) couples developed for MOST, the 2,3-difunctionalized cyano- and p-aryl-substituted NBD/QC couples have received greater attention for their promising properties. However, their application in solution requires the use of hazardous solvents, which limits their potential for large-scale implementation. Here, new greener systems consisting of cyano- and p-alkoxyphenyl-substituted NBD/QC derivatives dissolved in non-ionic surfactants and water were investigated. Concentrations of NBD up to 1.6 M were achieved by tuning the water/surfactant ratio, meeting the solubilization properties of organic solvents. The most promising system was further characterized, and its properties in water-based solutions were compared with those observed in toluene. Integration into a solar energy-harvesting liquid device led to the full conversion of the NBD to QC. The evaluation of the heat release performance upon catalytic trigger resulted in a temperature increase of 4.7 °C in ambient conditions. This demonstrates that promising NBDs/QCs can be used for MOST in aqueous media without compromising key performance parameters such as energy density, photoconversion, and catalyzed heat release., Financial support is acknowledged from the European Commission (H2020-FETPROACT-2019-951801; Molecular Solar Thermal Energy Storage Systems), the European Research Council (ERC) under grant agreement CoG, PHOTHERM 101002131, from the Deutsche Forschungsgemeinschaft (DFG) Research Unit FOR5499 “Molekulares Management von Sonnenenergie – Chemie von MOST – Systemen” Project number 496207555 including project part D-Dev: Exploring MOST for/in devices and funding from the European Innovation Council (EIC) under the project ESiM (grant agreement No. 101046364), the Agencia Estatal de Investigación (grant LIPCES), and the Catalan Institute of Advanced Studies (ICREA)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

An automated photo-isomerisation and kinetics characterisation system for molecular photoswitches

  • Elholm, Jacob Lynge
  • Baronas, Paulius
  • Gueben, Paul A.
  • Gneiting, Victoria
  • Hölzel, Helen
  • Moth-Poulsen, Kasper
Physical chemistry parameters such as absorbance, photoconversion quantum yield, and thermal half-lives are crucial for the characterisation of new molecular photoswitch systems. In a traditional workflow, these parameters are challenging and time-consuming to measure. In this paper, a high-throughput flow-based photoswitch characterisation platform with a built-in broad-spectrum LED array and thermal back-conversion capabilities is developed with UV-Vis spectroscopic analysis tools to reduce materials consumption, limit laborous workflows, and improve experimental reproducibility. Following the experiments, an in-house developed Python program is used for easy and fast data analysis. The program is designed to be able to analyse different types of photoswitches depending on the molecular properties. The specific components and configurations are detailed, enabling reproducibility and adaptation to various experimental needs. This system demonstrates the potential for efficient, high-throughput analysis in spectroscopic studies. Wide applicability is underlined by showing the results and comparison of three different photoswitch types, norbornadienes, bicyclooctadienes, and azobenzenes. The results we obtain are in good agreement with reported values in the literature., Financial support is acknowledged from the European Commissions Horizon 2020 Program (Grant No. 951801 MOST), the European Research Councils Excellent Science Program (Grant No. 101002131 PhoTherm), and from the Deutsche Forschungsgemeinschaft (DFG) Research Unit FOR5499 “Molekulares Management von Sonnenenergie – Chemie von MOST – Systemen” Project number 496207555 including project part D-Dev: Exploring MOST for/in devices., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Noninvasive cardiac modulation via triplet-sensitized photoswitching in the phototherapeutic window

  • Naimovičius, Lukas
  • Miroshnichenko, Mila
  • Opar, Ekin
  • Hölzel, Helen
  • Morikawa, Masa Aki
  • Kimizuka, Nobuo
  • Dapkevičius, Manvydas
  • Lekavičius, Justas
  • Radiunas, Edvinas
  • Kazlauskas, Karolis
  • Cilleros Mañé, Víctor
  • Riefolo, Fabio
  • Matera, Carlo
  • Harmandar, Kevser
  • Taniguchi, Masahiko
  • Dumoulin, Fabienne
  • Lindsey, Jonathan S.
  • Bharmoria, Pankaj
  • Gorostiza, Pau
  • Moth-Poulsen, Kasper
Red, far red, or near-infrared photoswitchable drugs offer immense photo-pharmacological advantages due to the higher light penetration through the skin. Such photoactivation is achieved using processes such as two- and three-photon absorption, excited-state absorption, and triplet-triplet annihilation upconversion, which require higher photon fluences (W to kW cm<sup>−2</sup>) than the resilience constraints of skin (200 mW cm<sup>−2</sup>). Herein, a generalized approach of cis-to-trans photoisomerization of azobenzenes is demonstrated via triplet sensitization with NIR-I illumination (850 nm) of a new Zn-octa-substituted phthalocyanine photosensitizer, in aqueous medium at 2.62 mW cm<sup>−2</sup>. The approach is applied to control the heart rate of a frog tadpole via cis-to-trans photoisomerization of an azobenzene-functionalized muscarinic acetylcholine receptor M<inf>2</inf> agonist in the phototherapeutic window (730 nm excitation: 42 mW cm<sup>−2</sup>). This advance highlights a powerful photo-pharmacological strategy for modulation of in vivo activity at 2-4 orders of magnitude lower photon fluences of NIR light compared to established methods., This work is developed within the scope of the La-Caixa junior research leadership-post doctoral project PHOLCEB (ID: 100010434, fellowship code: LCF/BQ/P122/11910023). P.B. and M.M. acknowledge La-Caixa foundation, the State Investigation Agency, through the Severo Ochoa Program for Centers of Excellence in R&D (CEX2023-001263-S) and project PID2021-123873NB-I00 for financial support. K.M.P. acknowledges funding from the European Research Council (No. 101002131), the Swedish Energy Agency, the Göran Gustafsson Foundation, the Swedish Research Council, Swedish Research Council Formas, the European Research Council (ERC) under grant agreement CoG, PHOTHERM –101002131, the Catalan Institute of Advanced Studies (ICREA) and the European Union’s Horizon 2020 Framework Program under grant agreement no. 951801. L.N. acknowledges the Erasmus + Traineeship Program. M.D., J.L., and K.K. acknowledge the “Universities‘ Excellence Initiative” program by the Ministry of Education, Science and Sports of the Republic of Lithuania under the agreement with the Research Council of Lithuania (project No. S-A-UEI-23-6). P.G. acknowledges EU Horizon 2020 Framework Program for Research and Innovation, including the European Innovation Council Pathfinder Open (Phototheraport, 101130883), Human Brain Project (WaveScalES, SGA3, 945539), and Information and Communication Technologies (Deeper, ICT-36-2020- 101016787). It is also supported by the Government of Catalonia (CERCA Program; AGAUR 2021-SGR-01410) and by the Spanish Ministry of Science and Innovation (DEEP RED, grant PID2019-111493RB-I00; EPILLUM, grant AEI/10.13039/501100011033; Research Network in Biomedicine eBrains-Spain, RED2022-134823-E). J.S.L. acknowledges support from the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, Chemical Sciences, Geosciences and Biosciences Division, under Award Number DE-FG0205ER15661. Galyna Malieieva, Núria Camarero (Institute for Bioengineering of Catalonia), and Javier Palacios Sánchez (Parc Científic de Barcelona) are acknowledged for help with Xenopus ethical procedures, mating and manipulation, which were authorized by the Barcelona Biomedical Research Park (PRBB) Animal Research Ethics Committee and the Catalan Government (code #9891), and by Parc Científic de Barcelona (CEEA-PCB 21-036). Nuria Aliaga-Alcalde and Daniel Herrera Miranda are acknowledged for performing electrocatalytic measurements., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Unveiling the potential of heterogeneous catalysts for molecular solar thermal systems

  • Gimenez Gomez, Alberto
  • Rollins, Benjamin
  • Steele, Andrew
  • Hölzel, Helen
  • Baggi, Nicolò|||0000-0003-4743-5151
  • Moth-Poulsen, Kasper|||0000-0003-4018-4927
  • Funes Ardoiz, Ignacio
  • Sampedro Ruiz, Diego
Solar energy utilization has gained considerable attention due to its abundance and renewability. However, its intermittent nature presents a challenge in harnessing its full potential. The development of energy storing compounds capable of capturing and releasing solar energy on demand has emerged as a potential solution. These compounds undergo a photochemical transformation that results in a high-energy metastable photoisomer, which stores solar energy in the form of chemical bonds and can release it as heat when required. Such systems are referred to as MOlecular Solar Thermal (MOST)-systems. Although the photoisomerization of MOST systems has been vastly studied, its back-conversion, particularly using heterogeneous catalysts, is still underexplored and the development of effective catalysts for releasing stored energy is crucial. Herein we compare the performance of 27 heterogeneous catalysts releasing the stored energy in an efficient Norbornadiene/Quadricyclane (NBD/QC) MOST system. We report the first benchmarking of heterogeneous catalysts for a MOST system using a robust comparison method of the catalysts’ activity and monitoring the conversion using UV-Visible (UV-Vis) spectroscopy. Our findings provide insights into the development of effective catalysts for MOST systems. We anticipate that our assay will reveal the necessity of further investigation on heterogeneous catalysis., We thank the European Union's H2020 research and innovation program under grant agreement N:951801 (MOST H2020-EIC-FETPROACT-2019-951801). Some results are part of the project TED2021-131896B-I00 financed by MCIN/AEI/10.13039/501100011033 and the European Union “Next Generation EU”/PRTR. I. F.-A. thanks the MICINN of Spain for financial support (IJC2020-045125-I). As part of the FETPROACT MOST project, all catalysts tested were provided by Johnson Matthey (JM)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

An automated photo-isomerisation and kinetics characterisation system for molecular photoswitches

  • Elholm, Jacob Lynge
  • Baronas, Paulius|||0000-0002-4141-1485
  • Gueben, Paul Augustin
  • Gneiting, Victoria Maria|||0009-0002-4246-4164
  • Hölzel, Helen
  • Moth-Poulsen, Kasper|||0000-0003-4018-4927
Physical chemistry parameters such as absorbance, photoconversion quantum yield, and thermal half-lives are crucial for the characterisation of new molecular photoswitch systems. In a traditional workflow, these parameters are challenging and time-consuming to measure. In this paper, a high-throughput flow-based photoswitch characterisation platform with a built-in broad-spectrum LED array and thermal back-conversion capabilities is developed with UV-Vis spectroscopic analysis tools to reduce materials consumption, limit laborous workflows, and improve experimental reproducibility. Following the experiments, an in-house developed Python program is used for easy and fast data analysis. The program is designed to be able to analyse different types of photoswitches depending on the molecular properties. The specific components and configurations are detailed, enabling reproducibility and adaptation to various experimental needs. This system demonstrates the potential for efficient, high-throughput analysis in spectroscopic studies. Wide applicability is underlined by showing the results and comparison of three different photoswitch types, norbornadienes, bicyclooctadienes, and azobenzenes. The results we obtain are in good agreement with reported values in the literature., Financial support is acknowledged from the European Commissions Horizon 2020 Program (Grant No. 951801 MOST), the European Research Councils Excellent Science Program (Grant No. 101002131 PhoTherm), and from the Deutsche Forschungsgemeinscha (DFG) Research Unit FOR5499 “Molekulares Management von Sonnenenergie – Chemie von MOST – Systemen” Project number 496207555 including project part D-Dev: Exploring MOST for/in devices., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Surfactant-enabled strategy for molecular solar thermal energy storage systems in water

  • Fernandez, Lorette Sylvie Jacqueline|||0000-0002-6776-7359
  • Hölzel, Helen
  • Ferreira, Pedro
  • Baggi, Nicolò|||0000-0003-4743-5151
  • Moreno, Kevin
  • Wang, Zhihang
  • Moth-Poulsen, Kasper|||0000-0003-4018-4927
Molecular solar thermal energy storage (MOST) systems, which absorb sunlight, store this energy in chemical bonds, and release it as heat, are receiving increasing attention in renewable energy storage applications. Among the norbornadiene/quadricyclane (NBD/QC) couples developed for MOST, the 2,3-difunctionalized cyano- and p-aryl-substituted NBD/QC couples have received greater attention for their promising properties. However, their application in solution requires the use of hazardous solvents, which limits their potential for large-scale implementation. Here, new greener systems consisting of cyano- and p-alkoxyphenyl-substituted NBD/QC derivatives dissolved in non-ionic surfactants and water were investigated. Concentrations of NBD up to 1.6 M were achieved by tuning the water/surfactant ratio, meeting the solubilization properties of organic solvents. The most promising system was further characterized, and its properties in water-based solutions were compared with those observed in toluene. Integration into a solar energy-harvesting liquid device led to the full conversion of the NBD to QC. The evaluation of the heat release performance upon catalytic trigger resulted in a temperature increase of 4.7 °C in ambient conditions. This demonstrates that promising NBDs/QCs can be used for MOST in aqueous media without compromising key performance parameters such as energy density, photoconversion, and catalyzed heat release., Financial support is acknowledged from the European Commission (H2020-FETPROACT-2019-951801; Molecular Solar Thermal Energy Storage Systems), the European Research Council (ERC) under grant agreement CoG, PHOTHERM 101002131, from the Deutsche Forschungsgemeinschaft (DFG) Research Unit FOR5499 “Molekulares Management von Sonnenenergie – Chemie von MOST – Systemen” Project number 496207555 including project part D-Dev: Exploring MOST for/in devices and funding from the European Innovation Council (EIC) under the project ESiM (grant agreement No. 101046364), the Agencia Estatal de Investigación (grant LIPCES), and the Catalan Institute of Advanced Studies (ICREA)., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Unveiling the potential of heterogeneous catalysts for molecular solar thermal systems

  • Gimenez Gomez, Alberto
  • Rollins, Benjamin
  • Steele, Andrew
  • Hölzel, Helen
  • Baggi, Nicolò
  • Moth-Poulsen, Kasper
  • Funes Ardoiz, Ignacio
  • Sampedro Ruiz, Diego
Solar energy utilization has gained considerable attention due to its abundance and renewability. However, its intermittent nature presents a challenge in harnessing its full potential. The development of energy storing compounds capable of capturing and releasing solar energy on demand has emerged as a potential solution. These compounds undergo a photochemical transformation that results in a high-energy metastable photoisomer, which stores solar energy in the form of chemical bonds and can release it as heat when required. Such systems are referred to as MOlecular Solar Thermal (MOST)-systems. Although the photoisomerization of MOST systems has been vastly studied, its back-conversion, particularly using heterogeneous catalysts, is still underexplored and the development of effective catalysts for releasing stored energy is crucial. Herein we compare the performance of 27 heterogeneous catalysts releasing the stored energy in an efficient Norbornadiene/Quadricyclane (NBD/QC) MOST system. We report the first benchmarking of heterogeneous catalysts for a MOST system using a robust comparison method of the catalysts’ activity and monitoring the conversion using UV-Visible (UV-Vis) spectroscopy. Our findings provide insights into the development of effective catalysts for MOST systems. We anticipate that our assay will reveal the necessity of further investigation on heterogeneous catalysis., We thank the European Union's H2020 research and innovation program under grant agreement N:951801 (MOST H2020-EIC-FETPROACT-2019-951801). Some results are part of the project TED2021-131896B-I00 financed by MCIN/AEI/10.13039/501100011033 and the European Union “Next Generation EU”/PRTR. I. F.-A. thanks the MICINN of Spain for financial support (IJC2020-045125-I). As part of the FETPROACT MOST project, all catalysts tested were provided by Johnson Matthey (JM)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Surfactant-enabled strategy for molecular solar thermal energy storage systems in water

  • Fernandez, Lorette Sylvie Jacqueline
  • Hölzel, Helen
  • Ferreira, Pedro
  • Baggi, Nicolò
  • Moreno, Kevin
  • Wang, Zhihang
  • Moth-Poulsen, Kasper
Molecular solar thermal energy storage (MOST) systems, which absorb sunlight, store this energy in chemical bonds, and release it as heat, are receiving increasing attention in renewable energy storage applications. Among the norbornadiene/quadricyclane (NBD/QC) couples developed for MOST, the 2,3-difunctionalized cyano- and p-aryl-substituted NBD/QC couples have received greater attention for their promising properties. However, their application in solution requires the use of hazardous solvents, which limits their potential for large-scale implementation. Here, new greener systems consisting of cyano- and p-alkoxyphenyl-substituted NBD/QC derivatives dissolved in non-ionic surfactants and water were investigated. Concentrations of NBD up to 1.6 M were achieved by tuning the water/surfactant ratio, meeting the solubilization properties of organic solvents. The most promising system was further characterized, and its properties in water-based solutions were compared with those observed in toluene. Integration into a solar energy-harvesting liquid device led to the full conversion of the NBD to QC. The evaluation of the heat release performance upon catalytic trigger resulted in a temperature increase of 4.7 °C in ambient conditions. This demonstrates that promising NBDs/QCs can be used for MOST in aqueous media without compromising key performance parameters such as energy density, photoconversion, and catalyzed heat release., Financial support is acknowledged from the European Commission (H2020-FETPROACT-2019-951801; Molecular Solar Thermal Energy Storage Systems), the European Research Council (ERC) under grant agreement CoG, PHOTHERM 101002131, from the Deutsche Forschungsgemeinschaft (DFG) Research Unit FOR5499 “Molekulares Management von Sonnenenergie – Chemie von MOST – Systemen” Project number 496207555 including project part D-Dev: Exploring MOST for/in devices and funding from the European Innovation Council (EIC) under the project ESiM (grant agreement No. 101046364), the Agencia Estatal de Investigación (grant LIPCES), and the Catalan Institute of Advanced Studies (ICREA)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

An automated photo-isomerisation and kinetics characterisation system for molecular photoswitches

  • Elholm, Jacob Lynge
  • Baronas, Paulius
  • Gueben, Paul Augustin
  • Gneiting, Victoria Maria
  • Hölzel, Helen
  • Moth-Poulsen, Kasper
Physical chemistry parameters such as absorbance, photoconversion quantum yield, and thermal half-lives are crucial for the characterisation of new molecular photoswitch systems. In a traditional workflow, these parameters are challenging and time-consuming to measure. In this paper, a high-throughput flow-based photoswitch characterisation platform with a built-in broad-spectrum LED array and thermal back-conversion capabilities is developed with UV-Vis spectroscopic analysis tools to reduce materials consumption, limit laborous workflows, and improve experimental reproducibility. Following the experiments, an in-house developed Python program is used for easy and fast data analysis. The program is designed to be able to analyse different types of photoswitches depending on the molecular properties. The specific components and configurations are detailed, enabling reproducibility and adaptation to various experimental needs. This system demonstrates the potential for efficient, high-throughput analysis in spectroscopic studies. Wide applicability is underlined by showing the results and comparison of three different photoswitch types, norbornadienes, bicyclooctadienes, and azobenzenes. The results we obtain are in good agreement with reported values in the literature., Financial support is acknowledged from the European Commissions Horizon 2020 Program (Grant No. 951801 MOST), the European Research Councils Excellent Science Program (Grant No. 101002131 PhoTherm), and from the Deutsche Forschungsgemeinscha (DFG) Research Unit FOR5499 “Molekulares Management von Sonnenenergie – Chemie von MOST – Systemen” Project number 496207555 including project part D-Dev: Exploring MOST for/in devices., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Bidirectional Photoswitching of a Tailored Azobenzene with Red and Far-Red Light Involving Triplet Sensitization in an Aqueous System

  • Miroshnichenko, Mila
  • Hölzel, Helen
  • Orentas, Edvinas
  • Kazlauskas, Karolis
  • Ferreira, Pedro
  • Dumoulin, Fabienne
  • Alcaide, Carles
  • Solà, Miquel
  • Bresolí-Obach, Roger
  • Nonell, Santi
  • Bharmoria, Pankaj
  • Moth-Poulsen, Kasper
Shifting action spectrum of azobenzene-based photopharmaceuticals toward bio-optical window is highly desired, since red/far-red light offers improved tissue penetration and reduced cellular toxicity. While unidirectional photoswitching (trans-to-cis and cis-to-trans) of azobenzenes (AZO) with red/far-red light is known in separate systems, achieving bidirectional photoswitching in a single system faces issues of spectral overlaps. Here, bidirectional photoswitching of a tailored azobenzene is achieved in a single bio-relevant solution with red and far-red light excitation. A new azobenzene molecule (AZO-N) bearing four ortho-methoxy, and one para-N donor lipophile is synthesized. The AZO-N exhibits separate n-π* absorption bands and triplet energies for trans and cis isomers. As a result, trans-to-cis photoswitching is observed upon 625 nm excitation at the tail of the red-shifted n-π*absorption band via direct absorption, whereas cis-to-trans photoswitching is enabled upon 730 nm excitation through triplet sensitization. Further, triplet sensitization of AZO-based molecules could lead to singlet oxygen generation—experiments in the presence of serum albumin and glutathione (biological oxidative stress addressors), suggest no effect of singlet oxygen on the triplet-sensitization of cis-AZO-N, and non-significant change in the fingerprint all-α secondary structure of serum albumin. This advance presents modular design principles to develop practically functional azo-based photopharmaceuticals., info:eu-repo/semantics/publishedVersion