Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 885
Encontrada(s) 9 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Sulfate-Decorated Amorphous-Crystalline Cobalt-Iron Oxide Nanosheets to Enhance O-O Coupling in the Oxygen Evolution Reaction

  • Wang, Xiang
  • Li, Junshan|||0000-0002-1482-1972
  • Xue, Qian
  • Han, Xu|||0000-0001-8319-8830
  • Xing, Congcong|||0000-0001-7674-6720
  • Liang, Zhifu
  • Guardia, Pablo|||0000-0001-9076-4642
  • Zuo, Yong|||0000-0003-1564-467X
  • Du, Ruifeng
  • Balcells i Argemí, Lluís|||0000-0001-6603-7357
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The electrochemical oxygen evolution reaction (OER) plays a fundamental role in several energy technologies, which performance and cost-effectiveness are in large part related to the used OER electrocatalyst. Herein, we detail the synthesis of cobalt-iron oxide nanosheets containing controlled amounts of well-anchored SO42- anionic groups (CoFexOy-SO4). We use a cobalt-based zeolitic imidazolate framework (ZIF-67) as the structural template and a cobalt source and Mohr's salt ((NH4)2Fe(SO4)2·6H2O) as the source of iron and sulfate. When combining the ZIF-67 with ammonium iron sulfate, the protons produced by the ammonium ion hydrolysis (NH4+ + H2O = NH3·H2O + H+) etch the ZIF-67, dissociating its polyhedron structure, and form porous assemblies of two-dimensional nanostructures through a diffusion-controlled process. At the same time, iron ions partially replace cobalt within the structure, and SO42- ions are anchored on the material surface by exchange with organic ligands. As a result, ultrathin CoFexOy-SO4 nanosheets are obtained. The proposed synthetic procedure enables controlling the amount of Fe and SO4 ions and analyzing the effect of each element on the electrocatalytic activity. The optimized CoFexOy-SO4 material displays outstanding OER activity with a 10 mA cm-2 overpotential of 268 mV, a Tafel slope of 46.5 mV dec-1, and excellent stability during 62 h. This excellent performance is correlated to the material's structural and chemical parameters. The assembled nanosheet structure is characterized by a large electrochemically active surface area, a high density of reaction sites, and fast electron transportation. Meanwhile, the introduction of iron increases the electrical conductivity of the catalysts and provides fast reaction sites with optimum bond energy and spin state for the adsorption of OER intermediates. The presence of sulfate ions at the catalyst surface modifies the electronic energy level of active sites, regulates the adsorption of intermediates to reduce the OER overpotential, and promotes the surface charge transfer, which accelerates the formation of oxygenated intermediates. Overall, the present work details the synthesis of a high-efficiency OER electrocatalyst and demonstrates the introduction of nonmetallic anionic groups as an excellent strategy to promote electrocatalytic activity in energy conversion technologies.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Band Alignment and Photoresponse of LaFe O3 -Based Heterojunctions

  • Sheng, Yunwei|||0000-0001-8173-0483
  • Mirjolet, Mathieu|||0000-0002-8471-3184
  • Villa Navas, Mario|||0000-0003-2949-5628
  • Gázquez Alabart, Jaume|||0000-0002-2561-328X
  • Santiso, José|||0000-0003-4274-2101
  • Klein, Andreas
  • Fraxedas, Jordi|||0000-0002-2821-4831
  • Fontcuberta, Josep|||0000-0002-7955-2320
Epitaxial LaFeO3 (LFO)-based photocells, of different thicknesses (50-200 nm) have been grown on cubic LSAT (001) [(LaAlO3)0.3(Sr2TaAlO6)0.7] single-crystal substrates, using a La2/3Sr1/3MnO3 (LSMO) bottom electrode and different top electrodes [Pt,Ba0.95La0.05SnO3 (BLSO)], to determine their photoresponse. The measured short-circuit photocurrent first increases with LFO thickness and then decreases, and it is larger or smaller, when Pt or BLSO electrodes are used, respectively. The corresponding open-circuit voltage displays the opposite trend, being smaller or larger for Pt and BLSO, respectively, which is in excellent agreement with the electronic band alignments determined by x-ray photoelectron spectroscopy and also consistent with the rectifying character of the dark current-voltage data. It turns out that the films display a complex microstructure containing different variants, strained and relaxed, of the orthorhombic LaFeO3, that evolves with film thickness and entails the presence of strain gradients and, possibly, flexoelectric fields. We discuss these data and propose that the unavoidable grain boundaries between differently textured LaFeO3 crystallites play a significant role on the observed responsivity (2.6 × 10-4 A W-1), found to be larger than in related LFO-based structures.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

N-Doped Octagon-Containing HBC as Redox and pH Chiroptical Switch in the NIR

  • Medel, Miguel A.|||0000-0003-2594-1723
  • Hortigüela, Lidia
  • Lloveras, Vega
  • Catalán-Toledo, José|||0000-0001-6165-1286
  • Miguel, Delia
  • Mota, Antonio J.
  • Crivillers, Núria|||0000-0001-6538-2482
  • González Campaña, Araceli|||0000-0001-5483-5642
  • Morcillo, Sara P.
The optical and chiroptical properties of an aza-HBC-oct-[5]helicene have been studied and also modulated by means of protonation or oxidation. In both cases, the generated species shows a new absorption band in the NIR region that is not present in the neutral species. This result enables this N-doped nanographene to act both as optical and, remarkably, as chiroptical switch since both the CD and CPL can be modulated by external stimuli such as redox or pH changes.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Photon upconversion crystals doped bacterial cellulose composite films as recyclable photonic bioplastics

  • Bharmoria, Pankaj|||0000-0001-6573-0475
  • Naimovičius, Lukas|||0000-0002-3358-4108
  • Abol-Fotouh, Deyaa|||0000-0003-4505-5534
  • Miroshnichenko, Mila
  • Lekavičius, Justas
  • De Luca, Gabriele|||0000-0003-3757-3761
  • Saeed, Umair|||0000-0001-7397-9123
  • Kazlauskas, Karolis
  • Candau, Nicolas|||0000-0002-1559-8696
  • Baronas, Pauliu
  • Roig i Serra, Anna|||0000-0001-6464-7573
  • Moth-Poulsen, Kasper|||0000-0003-4018-4927
Biopolymers currently utilized as substitutes for synthetic polymers in photonics applications are predominantly confined to linear optical color responses. Herein we expand their applications in non-linear optics by integrating with triplet-triplet annihilation photon upconversion crystals. A photon upconverting biomaterial is prepared by cultivating Pd(II) meso-tetraphenyl tetrabenzoporphine: 9,10-diphenyl anthracene (sensitizer: annihilator) crystals on bacterial cellulose hydrogel that serves both as host and template for the crystallization of photon upconversion chromophores. Coating with gelatin improves the material's optical transparency by adjusting the refractive indices. The prepared material shows an upconversion of 633 nm red light to 443 nm blue light, indicated by quadratic to linear dependence on excitation power density (non-linearly). Notably, components of this material are physically dis-assembled to retrieve 66 ± 1% of annihilator, at the end of life. Whereas, the residual clean biomass is subjected to biodegradation, showcasing the sustainability of the developed photonics material.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Influences of fluid and system design parameters on hydrodynamically driven low gradient magnetic separation of magnetic nanoparticles

  • Tan, Yee Win
  • Gunn, Priscilla Fong Ern
  • Ng, Weiming
  • Leong, Sim Siong|||0000-0001-8247-0169
  • Toh, Pey Yi
  • Camacho, Juan|||0000-0002-8095-4167
  • Faraudo, Jordi|||0000-0002-6315-4993
  • Lim, JitKang|||0000-0002-3205-1617
The migration of magnetic nanoparticles (MNPs) in solution under magnetic field gradients (magnetophoresis) is an essential step in many separation processes in the field of chemical and other engineering disciplines. Previous works show that weak magnetic gradients generated by handheld magnets are enough to induce substantial magnetophoresis of MNPs, due to hydrodynamic effect (magnetophoresis induced convection). However, it is not known how the properties of the MNPs and the fluid influence the significance of this hydrodynamic effect. In this work, we study experimentally and by theoretical simulations how the fluid viscosity, fluid flow confinement and magnetic field distribution affect the intensity of magnetophoresis induced convection. The theoretical simulation conducted in this study is based on the theoretical framework established in our previous works on the hydrodynamic effect of LGMS process involving dilute colloidal MNP system. We show that the intensity of the induced convection increases by lowering the viscosity, decreasing the geometrical confinement and increasing the magnetic field gradient. Also, we show that the effect of all these variables can be characterized by the value of the dimensionless magnetic Grashof number Grm. These findings are crucial in the design, optimi zation and intensification of LGMS processes for real time applications.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

BioMOF@cellulose Glycerogel Scaffold with Multifold Bioactivity, Perspective in Bone Tissue Repair

  • Rosado, Albert|||0000-0003-3222-9566
  • Borrás Caballero, Alejandro|||0000-0002-0725-421X
  • Sánchez-Soto, Miguel|||0000-0002-0023-5059
  • Labíková, Magdaléna
  • Hettegger, Hubert|||0000-0002-9343-5673
  • Ramírez-Jiménez, Rosa Ana|||0000-0001-7563-2553
  • Rojo, Luís|||0000-0001-6334-6736
  • García-Fernández, Luis|||0000-0002-4179-2556
  • Aguilar, María Rosa|||0000-0001-7395-5754
  • Liebner, Falk|||0000-0002-8244-8153
  • López-Periago, Ana M.|||0000-0002-3777-3205
  • Ayllón, José A.|||0000-0001-7965-7424
  • Domingo, Concepción|||0000-0001-7857-2760
The development of new biomaterials for musculoskeletal tissue repair is currently an important branch in biomedicine research. The approach presented here is centered around the development of a prototypic synthetic glycerogel scaffold for bone regeneration, which simultaneously features therapeutic activity. The main novelty of this work lies in the combination of an open meso and macroporous nanocrystalline cellulose (NCC)-based glycerogel with a fully biocompatible microporous bioMOF system (CaSyr-1) composed of calcium ions and syringic acid. The bioMOF framework is further impregnated with a third bioactive component, i.e., ibuprofen (ibu), to generate a multifold bioactive system. The integrated CaSyr-1(ibu) serves as a reservoir for bioactive compounds delivery, while the NCC scaffold is the proposed matrix for cell ingrowth, proliferation and differentiation. The measured drug delivery profiles, studied in a phosphate-buffered saline solution at 310 K, indicate that the bioactive components are released concurrently with bioMOF dissolution after ca. 30 min following a pseudo-first-order kinetic model. Furthermore, according to the semi-empirical Korsmeyer-Peppas kinetic model, this release is governed by a case-II mechanism, suggesting that the molecular transport is influenced by the relaxation of the NCC matrix. Preliminary in vitro results denote that the initial high concentration of glycerol in the NCC scaffold can be toxic in direct contact with human osteoblasts (HObs). However, when the excess of glycerol is diluted in the system (after the second day of the experiment), the direct and indirect assays confirm full biocompatibility and suitability for HOb proliferation.
Dipòsit Digital de Documents de la UAB
Publication Artículo de revisión (ReviewArticle)

Biohybrid Hydrogels for Tumoroid Culture

  • Castellote-Borrell, Miquel|||0000-0001-7703-2228
  • Merlina, Francesca|||0000-0001-5040-1687
  • Rodríguez, Adrián R.
  • Guasch, Judith|||0000-0002-3571-4711
Tumoroids are 3D in vitro models that recapitulate key features of in vivo tumors, such as their architecture - hypoxic center and oxygenated outer layer - in contrast with traditional 2D cell cultures. Moreover, they may be able to preserve the patient-specific signature in terms of cell heterogeneity and mutations. Tumoroids are, therefore, interesting tools for improving the understanding of cancer biology, developing new drugs, and potentially designing personalized therapeutic plans. Currently, tumoroids are most often established using basement membrane extracts (BME), which provide a multitude of biological cues. However, BME are characterized by a lack of well-defined composition, limited reproducibility, and potential immunogenicity as a consequence of their natural origin. Synthetic polymers can overcome these problems but lack structural and biochemical complexity, which can limit the functional capabilities of organoids. Biohybrid hydrogels consisting of both natural and synthetic components can combine their advantages and offer superior 3D culture systems. In this review, it is summarized efforts devoted to producing tumoroids using different types of biohybrid hydrogels, which are classified according to their crosslinking mechanism.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Multifunctionalized zirconium-based MOF as a novel support for dispersed copper, application in CO2 adsorption and catalytic conversion

  • Rosado, Albert|||0000-0003-3222-9566
  • Popa, Ioana-Maria
  • Abo Markeb, Ahmad|||0000-0003-4385-0198
  • Moral-Vico, Javier|||0000-0002-6795-3450
  • Naughton, Eva Maria|||0000-0003-2120-1584
  • Eckhardt, Hans-Georg
  • Ayllón, José A.|||0000-0001-7965-7424
  • López-Periago, Ana M.|||0000-0002-3777-3205
  • Domingo, Concepción|||0000-0001-7857-2760
  • Negahdar, Leila|||0000-0002-9119-6445
CO2 conversion and utilization for global sustainability is an integral part of greenhouse gases management, typically for the production of fuels and specialty chemicals. Added value products, such as methanol, methane or formate, can be obtained by electrocatalysis and thermocatalysis, the two techniques addressed in this study. The main motivation of this study is to develop a copper based catalyst active in both processes, confronting the main concerns regarding typical metal catalysts related to nanoparticles aggregation and concomitant deactivation. For this, modified NU-1000, a water-stable mesoporous MOF, is used as a platform for the simultaneous coordination-stabilization of copper single atoms and CO2 adsorption. NU-1000 is synthetized with primary amino groups (-NH2 with affinity for CO2) by modifying the ligand prior to MOF synthesis, while post-synthetic solvent-assisted ligand incorporation is applied to insert thiol functionalities (-SH with affinity for copper) within the framework. To make the functionalized MOF catalytically active, a Cu2+ salt is impregnated into the MOF channels, which is further reduced with H2 to Cu+/Cu0 before performance assessment in CO2 conversion processes. The as-synthetized and spent catalysts were analysed regarding the structure (X-ray diffraction, infrared), bulk (mass spectrometry) and surface (X-ray photoelectron spectroscopy) composition, morphology (electronic microscopy and energy dispersive spectroscopy) and textural properties (N2 physisorption). The electrocatalytic reduction of CO2 was performed in the potential range of -0.8 to -1.8 V, indicating the formation of formic acid. Thermocatalytic experiments were carried out in an economically and energetically sustainable low-pressure (1 MPa) hydrogenation process. Methanol was obtained with 100% selectivity at temperatures up to 280 °C, and a space-time yield of ca. 100 mgMeOH gcat-1 h-1 which overcomes that of commercial CuZnO NPs designed for this purpose.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

HKUST-1 metal-organic framework nanoparticle/graphene oxide nanocomposite aerogels for CO2and CH4Adsorption and separation

  • Rosado, Albert|||0000-0003-3222-9566
  • Borrás Caballero, Alejandro|||0000-0002-0725-421X
  • Fraile, Julio|||0000-0003-2961-7920
  • Navarro, Jorge A. R.|||0000-0002-8359-0397
  • Suárez-García, Fabián|||0000-0002-1970-293X
  • Stylianou, Kyriakos C.|||0000-0003-1670-0020
  • López-Periago, Ana M.|||0000-0002-3777-3205
  • Giner Planas, José|||0000-0002-1648-2169
  • Domingo, Concepción|||0000-0001-7857-2760
  • Yazdi, Amirali|||0000-0001-9420-8504
The development of nanostructured composites made of metal-organic frameworks (MOFs) and graphene-based components, including exfoliated nanoplates of graphene oxide (GO) or reduced (rGO) graphene oxide, is an area of great interest in gas storage and separation. To improve the industrial viability, it is commonly demanded to build these nanocomposites with the shape of compact units, such as monoliths, foams, pellets, or films. Methods to generate those 3D nanocomposites involving rGO are abundant; however, they become scarce when GO is the desired support due to the difficulty in maintaining the carbon matrix oxidized during the structuration process. In this work, a methodology based on the use of supercritical CO2 (scCO2) is described for the synthesis of nanocomposites involving a discontinuous MOF phase, e.g. nanoparticles (NPs) of HKUST-1, decorating the surface of a continuous GO matrix, with surface oxygen groups favoring MOF attachment. The use of this new supercritical methodology allows the nanostructuration of the composite in the form of 3D aerogels while avoiding the reduction of GO. Enhanced values of textural properties, determined by low-temperature N2 adsorption-desorption, were observed for the nanocomposites in comparison to the values calculated for similar physical mixtures, highlighting an increase of 40-45% in the value of the surface area for samples with a high percentage of HKUST-1. Moreover, the composite aerogels, displaying a type II isotherm, outperform pristine HKUST-1 in regard to the CH4 practical working capacity at high pressure. Particularly, a composite exhibiting more than 2-fold the working capacity of net HKUST-1 NPs was obtained. Columns involving the composite aerogel as the stationary phase were used to study the separation of N2/CO2 and CH4/CO2 gas mixtures. The results showed a high selectivity of the nanostructured HKUST-1@GO composites for CO2, with breakthrough times of ca. 20 min g-1 and stable cyclic operations.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Anionic Doping in Layered Transition Metal Chalcogenides for Robust Lithium-Sulfur Batteries

  • Huang, Chen
  • Yu, Jing|||0000-0002-7620-745X
  • Zhang, Chao Yue
  • Cui, Zhibiao
  • He, Ren|||0000-0003-3712-5539
  • Yang, Linlin|||0009-0006-9953-5698
  • Nan, Bingfei|||0000-0002-7128-6056
  • Li, Canhuang
  • Qi, Xuede|||0009-0008-5723-3629
  • Li, Junshan|||0000-0002-1482-1972
  • Yuan Zhou, Jin
  • Usoltsev, Oleg|||0000-0002-1537-3497
  • Simonelli, Laura|||0000-0001-5331-0633
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Lei, Yao-Jie
  • Sun, Qing|||0000-0002-9145-7772
  • Wang, Guoxiu
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Lithium-sulfur batteries (LSBs) are among the most promising next-generation energy storage technologies. However, a slow Li-S reaction kinetics at the LSB cathode limit their energy and power densities. To address these challenges, this study introduces an anionic-doped transition metal chalcogenide as an effective catalyst to accelerate the Li-S reaction. Specifically, a tellurium-doped, carbon-supported bismuth selenide with Se vacancies (Te-Bi2Se3-x@C) is prepared and tested as a sulfur host in LSB cathodes. X-ray absorption and in situ X-ray diffraction analyses reveal that Te doping induces lattice distortions and modulates the local coordination environment and electronic structure of Bi atoms to promote the catalytic activity toward the conversion of polysulfides. Additionally, the generated Se vacancies alter the electronic structure around atomic defect sites, increase the carrier concentration, and activate unpaired cations to effectively trap polysulfides. As a result, LSBs based on Te-Bi2Se3-x@C/S cathodes demonstrate outstanding specific capacities of 1508 mAh ⋅ g-1 at 0.1 C, excellent rate performance with 655 mAh ⋅ g-1 at 5 C, and near-integral cycle stability over 1000 cycles. Furthermore, under high sulfur loading of 6.4 mg ⋅ cm-2, a cathode capacity exceeding 8 mAh ⋅ cm-2 is sustained at 0.1 C current rate, with 6.4 mAh ⋅ cm-2 retained after 300 cycles under lean electrolyte conditions (6.8 μL ⋅ mg-1).
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Direct Covalent Functionalization of H-Terminated 2D Germanane with Thiolated Molecules, Passivation and Tuning of Optoelectronic Properties

  • Campos-Lendínez, Ángel|||0000-0002-7672-027X
  • Faraudo, Jordi|||0000-0002-6315-4993
  • García-Antón, Jordi|||0000-0002-2401-0401
  • Sala, Xavier|||0000-0002-7779-6313
  • Muñoz, Jose|||0000-0001-9529-6980
Covalent molecular functionalization allows the physicochemical properties of 2D materials to be precisely tuned and modulated on-demand. Nonetheless, research on the molecular functionalization of 2D monoelemental graphene-like materials─known as Xenes─remains scarce, being mainly restricted to a specific type of solid-state chemical reaction based on the topotactic transformation of bulkier Zintl phases. Herein, a robust and general chemical approach is reported for the direct functionalization of commercially available H-terminated 2D germanene (2D-GeH) with thiolated molecules (R-SH) via Ge-S bond formation. While the material characterization data provide direct experimental evidence of the Ge-S chemical bonding, density functional theory (DFT) calculations also predict its existence. Remarkably, the anchored thiolated molecules also favor the passivation of the 2D Xene against air oxidation, enlarging its benefits for real implementation. As a proof-of-principle, a redox-responsive molecular moiety such as 6-(ferrocenyl)hexanethiol (Fc6-SH) has been exploited to induce changes in the optoelectronic properties of the resulting 2D-GeFc6 heterostructure by simply modulating the external bias potential, making it possible to optically and electrically read out a molecular switch on 2D Xene via implanting molecular responsiveness. Remarkably, the ON/OFF ratio has been shown to be dependent on the distance between the redox-responsive Fc moiety and the 2D Xene surface through the alkyl chain length. Overall, the reported a-la-carte molecular engineering approach provides the basis toward the rapid development of stable 2D-GeR derivatives exhibiting molecule-programmable properties.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Gene expression changes throughout the life cycle allow a bacterial plant pathogen to persist in diverse environmental habitats

  • de Pedro Jové, Roger|||0000-0002-7083-7960
  • Corral, Jordi|||0000-0003-2047-6156
  • Rocafort, Mercedes|||0000-0001-7192-695X
  • Puigvert, Marina|||0000-0002-2898-2187
  • Azam, Fàtima Latif|||0000-0002-9897-9872
  • Vandecaveye, Agustina
  • Macho, Alberto P.
  • Balsalobre Parra, Carlos|||0000-0002-4147-219X
  • Sánchez Coll, Núria|||0000-0002-8889-0399
  • Orellano, Elena
  • Valls, Marc|||0000-0003-2312-0091
Bacterial pathogens exhibit a remarkable ability to persist and thrive in diverse ecological niches. Understanding the mechanisms enabling their transition between habitats is crucial to control dissemination and potential disease outbreaks. Here, we use Ralstonia solanacearum, the causing agent of the bacterial wilt disease, as a model to investigate pathogen adaptation to water and soil, two environments that act as bacterial reservoirs, and compare this information with gene expression in planta. Gene expression in water resembled that observed during late xylem colonization, with an intriguing induction of the type 3 secretion system (T3SS). Alkaline pH and nutrient scarcity-conditions also encountered during late infection stages-were identified as the triggers for this T3SS induction. In the soil environment, R. solanacearum upregulated stress-responses and genes for the use of alternate carbon sources, such as phenylacetate catabolism and the glyoxylate cycle, and downregulated virulence-associated genes. We proved through gain- and loss-of-function experiments that genes associated with the oxidative stress response, such as the regulator OxyR and the catalase KatG, are key for bacterial survival in soil, as their deletion cause a decrease in culturability associated with a premature induction of the viable but non culturable state (VBNC). This work identifies essential factors necessary for R. solanacearum to complete its life cycle and is the first comprehensive gene expression analysis in all environments occupied by a bacterial plant pathogen, providing valuable insights into its biology and adaptation to unexplored habitats. Most bacterial pathogens have environmental populations outside their hosts that cause disease outbreaks. Very little is known about the genes necessary for adaptation and survival in these conditions because research on pathogenic bacteria has focused on their interaction with the eukaryotic host. In this work, we investigate global gene expression of the plant pathogen Ralstonia solanacearum in the two key environmental habitats that it occupies: water and soil. We describe extensive transcriptional reprogramming in response to each environment and unveil a number of candidate genes for adaptation to these harsh conditions. We discover that a costly virulence determinant (the type III secretion system) is transiently induced when bacteria are incubated in natural waters and identify pH as the main signal triggering this response. We propose that water conditions mimic those encountered in the plant xylem fluid and this enables the bacterium to be primed for infection. We also show for the first time that R. solanacearum induces in the soil the degradation of aromatic compounds and stress-response genes. We demonstrate that the oxidative stress response is essential for survival in this habitat.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Anionic and Magnetic Ordering in Rare Earth Tantalum Oxynitrides with an n = 1 Ruddlesden-Popper Structure

  • Guarín, Jhonatan R.
  • Frontera, Carlos|||0000-0002-0091-4756
  • Oró-Solé, Judith|||0000-0002-3755-4950
  • Colombel, Bastian
  • Ritter, Clemens
  • Fauth, François|||0000-0001-9465-3106
  • Fontcuberta, Josep|||0000-0002-7955-2320
  • Fuertes, Amparo|||0000-0001-5338-9724
The new compounds RTaON with R = La, Ce, Nd, and Eu and 1.20 ≤ x ≤ 2.81 have been obtained by a solid-state reaction between metal nitrides and oxides or oxynitrides under N gas at temperatures between 1200 and 1700 °C. They are the first examples of rare earth transition metal oxynitrides with an n = 1 Ruddlesden-Popper structure and show different anion stoichiometries, crystal structures, and magnetic properties. Synchrotron X-ray powder diffraction and electron diffraction indicate that the lanthanum, cerium, and neodymium compounds crystallize in the orthorhombic space group Pccn, with cell parameters a = 5.72949(2), b = 5.73055(5), and c = 12.77917(6) Å for LaTaON, a = 5.70500(5), b = 5.71182(4), and c = 12.61280(7) Å for CeTaON, and a = 5.70466(3), b = 5.70476(5), and c = 12.32365(5) Å for NdTaON. In contrast, EuTaON shows a tetragonal I 4/ acd superstructure doubling the c axis, with parameters a = 5.71867(2) and c = 25.00092(19) Å. Refinement of neutron powder diffraction data of CeTaON indicated the nitrogen order in the two equatorial positions of the tantalum octahedron, with refined N/O occupancies of 0.930(7)/0.070 and 0.876(13)/0.124, and the axial position is occupied by 50% of each anion. This anion ordering agrees with the distribution predicted by Pauling's second crystal rule. Magnetization measurements show that the cerium and europium compounds are ordered magnetically at low temperatures, while the neodymium compound remains paramagnetic down to 2 K, as a consequence of suppression of the effective magnetic moment of the latter when reducing the temperature.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Robust multiferroicity and magnetic modulation of the ferroelectric imprint field in heterostructures comprising epitaxial HfZrO and Co

  • Zakusylo, Tetiana|||0000-0001-5933-7108
  • Quintana, Alberto|||0000-0002-9813-735X
  • Lenzi, Veniero|||0000-0002-3633-1966
  • Silva, José P. B.|||0000-0002-3485-7032
  • Marques, Luís
  • Yano, José Luís Ortolá
  • Lyu, Jike
  • Sort, Jordi|||0000-0003-1213-3639
  • Sánchez Barrera, Florencio|||0000-0002-5314-453X
  • Fina, Ignasi|||0000-0003-4182-6194
Magnetoelectric multiferroics, either single-phase or composites comprising ferroelectric/ferromagnetic coupled films, are promising candidates for energy efficient memory computing. However, most of the multiferroic magnetoelectric systems studied so far are based on materials that are not compatible with industrial processes. Doped hafnia is emerging as one of the few CMOS-compatible ferroelectric materials. Thus, it is highly relevant to study the integration of ferroelectric hafnia into multiferroic systems. In particular, ferroelectricity in hafnia, and the eventual magnetoelectric coupling when ferromagnetic layers are grown atop of it, are very much dependent on quality of interfaces. Since magnetic metals frequently exhibit noticeable reactivity when grown onto oxides, it is expected that ferroelectricity and magnetoelectricity might be reduced in multiferroic hafnia-based structures. In this article, we present excellent ferroelectric endurance and retention in epitaxial HfZrO films grown on buffered silicon using Co as the top electrode. The crucial influence of a thin Pt capping layer grown on top of Co on the ferroelectric functional characteristics is revealed by contrasting the utilization of Pt-capped Co, non-capped Co and Pt. Magnetic control of the imprint electric field (up to 40% modulation) is achieved in Pt-capped Co/HfZrO structures, although this does not lead to appreciable tuning of the ferroelectric polarization, as a result of its high stability. Computation of piezoelectric and flexoelectric strain-mediated mechanisms of the observed magnetoelectric coupling reveal that flexoelectric contributions are likely to be at the origin of the large imprint electric field variation. Magnetoelectric composite multiferroic comprising ferroelectric doped HfO and ferromagnetic cobalt coupled films is demonstrated to be a promising candidate for energy efficient memory computing.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Impact of Twin's Landscape on the Magnetic Damping of La2/3Sr1/3MnO3 Thin Films

  • Chen, Shoulong
  • Pomar, Alberto|||0000-0002-5855-2356
  • Balcells i Argemí, Lluís|||0000-0001-6603-7357
  • Frontera, Carlos|||0000-0002-0091-4756
  • Mestres i Andreu, Narcís|||0000-0001-6468-4227
  • Martínez, Benjamín|||0000-0001-9879-7748
Understanding the origin and mechanisms of magnetic damping in complex oxide materials is crucial for optimizing spin dynamics and tailoring their properties for specific spintronic applications. Ferromagnetic resonance spectroscopy (FMR) technique has been used to investigate the magnetic damping of multiple LaSrMnO (LSMO) epitaxial thin films with similar thickness and identical DC magnetic properties. However, the dynamic magnetic properties exhibit noticeable variations among samples. Microstructural analyses using X-ray diffraction (XRD) and atomic force microscopy (AFM), confirm that the samples are structurally identical, except for minute differences in the miscut angles of the substrates. Nevertheless, when examining the samples using backscattered electron (BSE) images in scanning electron microscopy (SEM), significant disparities in the twin distribution are observed. These variations in the twin distribution directly correlate with the observed differences in the damping values. A careful image analysis of BSE images allows to demonstrate that the increase of damping is due to the pinning of the magnetization in the twin boundaries.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Beam Effects in Synchrotron Radiation Operando Characterization of Battery Materials, X-Ray Diffraction and Absorption Study of LiNi0.33Mn0.33Co0.33O2 and LiFePO4 Electrodes

  • Black Serra, Ashley Phillip|||0000-0001-7929-5144
  • Escudero, Carlos|||0000-0001-8716-9391
  • Fauth, François|||0000-0001-9465-3106
  • Fehse, Marcus|||0000-0001-8650-6974
  • Agostini, Giovanni
  • Reynaud, Marine|||0000-0002-0156-8701
  • Houdeville, Raphaelle G.
  • Chatzogiannakis, Dimitrios|||0000-0001-9856-8021
  • Orive, Joseba
  • Ramo-Irurre, Alejandro
  • Casas-Cabanas, Montse|||0000-0002-9298-2333
  • Palacín, M. Rosa|||0000-0001-7351-2005
Operando synchrotron radiation-based techniques are a precious tool in battery research, as they enable the detection of metastable intermediates and ensure characterization under realistic cycling conditions. However, they do not come exempt of risks. The interaction between synchrotron radiation and samples, particularly within an active electrochemical cell, can induce relevant effects at the irradiated spot, potentially jeopardizing the experiment's reliability and biasing data interpretation. With the aim of contributing to this ongoing debate, a systematic investigation into these phenomena was carried out by conducting a root cause analysis of beam-induced effects during the operando characterization of two of the most commonly employed positive electrode materials in commercial Li-ion batteries: LiNiMnCoO and LiFePO. The study spans across diverse experimental conditions involving different cell types and absorption and scattering techniques and seeks to correlate beam effects with factors such as radiation energy, photon flux, exposure time, and other parameters associated with radiation dosage. Finally, it provides a comprehensive set of guidelines and recommendations for assessing and mitigating beam-induced effects that may affect the outcome of battery operando experiments.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Spatial IMA1 regulation restricts root iron acquisition on MAMP perception

  • Cao, Min
  • Platre, Matthieu Pierre|||0000-0002-4934-3050
  • Tsai, Huei-Hsuan|||0000-0002-5166-2181
  • Zhang, Ling
  • Nobori, Tatsuya
  • Armengot, Laia|||0000-0002-3790-9838
  • Chen, Yintong|||0000-0002-2219-3136
  • He, Wenrong
  • Brent, Lukas|||0000-0002-8292-368X
  • Sánchez Coll, Núria|||0000-0002-8889-0399
  • Ecker, Joseph R.
  • Geldner, Niko|||0000-0002-2300-9644
  • Busch, Wolfgang|||0000-0003-2042-7290
Iron is critical during host-microorganism interactions. Restriction of available iron by the host during infection is an important defence strategy, described as nutritional immunity. However, this poses a conundrum for externally facing, absorptive tissues such as the gut epithelium or the plant root epidermis that generate environments that favour iron bioavailability. For example, plant roots acquire iron mostly from the soil and, when iron deficient, increase iron availability through mechanisms that include rhizosphere acidification and secretion of iron chelators. Yet, the elevated iron bioavailability would also be beneficial for the growth of bacteria that threaten plant health. Here we report that microorganism-associated molecular patterns such as flagellin lead to suppression of root iron acquisition through a localized degradation of the systemic iron-deficiency signalling peptide Iron Man 1 (IMA1) in Arabidopsis thaliana. This response is also elicited when bacteria enter root tissues, but not when they dwell on the outer root surface. IMA1 itself has a role in modulating immunity in root and shoot, affecting the levels of root colonization and the resistance to a bacterial foliar pathogen. Our findings reveal an adaptive molecular mechanism of nutritional immunity that affects iron bioavailability and uptake, as well as immune responses.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

The FERONIA-RESPONSIVE TO DESICCATION 26 module regulates vascular immunity to Ralstonia solanacearum, The FERONIA-RD26 module regulates vascular immunity against Ralstonia solanacearum through lignin biosynthesis in the xylem

  • Wang, Bingqian
  • Luo, Cailin
  • Li, Xiaoxu|||0000-0002-3778-3964
  • Jiménez Jiménez, Álvaro Luis|||0000-0002-9406-4595
  • Cai, Jun
  • Chen, Jia|||0000-0002-8725-9204
  • Li, Changsheng|||0000-0002-9579-4127
  • Zhang, Chunhui|||0000-0002-4579-9202
  • Ou, Lijun
  • Pu, Wenxuan
  • Peng, Yu
  • Zhang, Zhenchen
  • Cai, Yong
  • Valls, Marc|||0000-0003-2312-0091
  • Wu, Dousheng|||0000-0003-0375-7503
  • Yu, Feng|||0000-0002-5221-281X
Some pathogens colonize plant leaves, but others invade the roots, including the vasculature, causing severe disease symptoms. Plant innate immunity has been extensively studied in leaf pathosystems; however, the precise regulation of immunity against vascular pathogens remains largely unexplored. We previously demonstrated that loss of function of the receptor kinase FERONIA (FER) increases plant resistance to the typical vascular bacterial pathogen Ralstonia solanacearum. Here, we show that upon infection with R. solanacearum, root xylem cell walls in Arabidopsis thaliana become highly lignified. FER is specifically upregulated in the root xylem in response to R. solanacearum infection, and inhibits lignin biosynthesis and resistance to this pathogen. We determined that FER interacts with and phosphorylates the transcription factor RESPONSIVE TO DESICCATION 26 (RD26), leading to its degradation. Overexpression and knockout of RD26 demonstrated that it positively regulates plant resistance to R. solanacearum by directly activating the expression of lignin-related genes. Tissue-specific expression of RD26 in the root xylem confirmed its role in vascular immunity. We confirmed that the FER-RD26 module regulates lignin biosynthesis and resistance against R. solanacearum in tomato (Solanum lycopersicum). Taken together, our findings unveil that the FER-RD26 cascade governs plant immunity against R. solanacearum in vascular tissues by regulating lignin deposition. This cascade may represent a key defense mechanism against vascular pathogens in plants.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Metal Propionate Solutions for High-Throughput Liquid-Assisted Manufacturing of Superconducting REBaCuO (RE = Y, Gd, Sm, and Yb) Films

  • Saltarelli, Lavinia|||0000-0001-7519-2981
  • Sanchez-Rodriguez, Daniel
  • Gupta, Kapil|||0000-0002-4826-6620
  • Kethamkuzhi, Aiswarya
  • Farjas Silva, Jordi|||0000-0002-4093-9843
  • Molins Grau, Elies|||0000-0003-1012-0551
  • Yáñez, Ramón|||0000-0002-2021-0924
  • Ricart, Susana|||0000-0003-4196-2081
  • Obradors, Xavier|||0000-0003-4592-7718
  • Puig, Teresa
The cost-effective synthesis of a series of metal propionate powders (copper, yttrium, barium, samarium, gadolinium, and ytterbium) is developed through single chemical reactions resulting in five novel crystalline forms. These complexes are valuable precursors for the preparation of epitaxial REBaCuO (REBCO) superconducting films (here, RE = Y, Sm, Gd, and Yb) through the innovative transient liquid-assisted growth (TLAG) process based on chemical solution deposition (CSD). TLAG-CSD shows impressive results with YBaCuO (YBCO), obtaining critical current densities of 2.6 MA/cm 2 (77 K) on 500 nm films at unprecedented growth rates (50-2000 nm/s), boosting unprecedented high-throughput industrial production. With a cardinal concern on designing the pyrolysis toward optimal nanocrystalline films for TLAG, an analysis of the thermal behavior of the synthesized precursors is essential. Decomposition pathways for each metal propionate are established, and compatibility with TLAG-CSD is corroborated. Metal-organic solutions for these REBCO systems are successfully prepared, and their rheological properties and thermal behavior are analyzed. This work demonstrates homogeneous nanocrystalline films through propionate-based REBCO precursor solutions, including several rare-earth ions, which display exemplary chemical and microstructural characteristics crucial for TLAG, and provides a base for a wide variety of CSD-based functional oxides.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

The Ralstonia solanacearum catalase-peroxidase KatG is crucial to survive environmental stresses and also plays a role in plant infection

  • Corral, Jordi|||0000-0003-2047-6156
  • Rocafort, Mercedes|||0000-0001-7192-695X
  • Ripa, M. Belén
  • Vandecaveye, Agustina
  • Pezzoni, Magdalena
  • Invernon, Alicia
  • Sánchez Coll, Núria|||0000-0002-8889-0399
  • Valls, Marc|||0000-0003-2312-0091
  • Orellano, Elena G.
Throughout their life cycle, pathogens are challenged by Reactive Oxygen Species (ROS) and must deploy defence mechanisms against oxidative damage. Environmental stressors such as ultraviolet radiation and desiccation induce intracellular ROS production. Moreover, during pathogen colonisation, plant hosts initiate an oxidative burst, leading to the accumulation of hydrogen peroxide (H2O2). Catalases mitigate ROS toxicity by catalysing the breakdown of H2O2 into water and oxygen. In this study, we explored the roles of the monofunctional catalase (KatE) and the bifunctional catalase-peroxidase (KatG) in the phytopathogen Ralstonia solanacearum during both environmental stress conditions and in planta colonisation stages. Our results demonstrate that both catalases are critical for surviving ROS, with KatG having a more preponderant role. Plant pathogenicity assays show that catalases are not required for virulence although they are important for bacterial fitness in the apoplast. In contrast, we prove that both catalases are vital for R. solanacearum response to oxidative stress in the external environment. KatG was indispensable for survival in soil, as well as for enduring ultraviolet radiation and desiccation exposure. Our findings reveal that the primary function of R. solanacearum catalases is to counteract ROS generated by environmental stressors rather than host-derived oxidative defences. This research identifies specific environmental stressors that these catalases combat during pathogen survival. These insights pave the way for future strategies targeting catalase activity to control bacterial wilt disease.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Green Supercritical CO2 Synthesis of [Copper Clusters@FeBTC]@rGO Catalyst for Highly Efficient Hydrogenation of CO2 to Methanol

  • Kubovics, Márta|||0000-0002-2441-8562
  • Borrás Caballero, Alejandro|||0000-0002-0725-421X
  • Abo Markeb, Ahmad|||0000-0003-4385-0198
  • Marbán, Gregorio|||0000-0002-8387-3282
  • Moral-Vico, Javier|||0000-0002-6795-3450
  • Sánchez, Antoni|||0000-0003-4254-8528
  • López-Periago, Ana M.|||0000-0002-3777-3205
  • Domingo, Concepción|||0000-0001-7857-2760
In the vast majority of studies, methanol production via CO hydrogenation is realized using bifunctional catalysts, commonly CuZnO phases. The basic motivation of this study is to confront main concerns regarding typical copper-based catalysts, which are the aggregation of the active metal nanoparticles (NPs) and its concomitant deactivation. For this, an extensive research on composites of mesoporous iron trimesate metal-organic frameworks (MOFs) [crystalline MIL-100(Fe) and semiamorphous FeBTC], loaded with copper clusters (CuCs) into the pores, is performed, because it is a pioneer in the area. The growth and aggregation of CuCs are hindered by the confinement of the active entities into the MOF mesocages. From the two studied MOFs, only the copper loaded semiamorphous FeBTC behaves as a catalyst. To further enhance the catalytic activity, CuCs@FeBTC NPs are dispersed on the plates constituting a reduced graphene-oxide aerogel. Main steps in the preparation of these complex catalysts involve the use of sustainable technology based on supercritical CO, used either as a solvent or drying agent. The reduction strategy designed to obtain the active catalyst (Cu to Cu/Cu in CuCs) was crucial to upgrade the end product performance. A double reduction route, applying ascorbic acid preceding thermal H reduction, turns out to be necessary to attain a significant catalytic activity of the confined Cu species. The as-synthesized and spent catalysts were analyzed in regard of the structure (X-ray diffraction, infrared), bulk (mass spectrometry) and surface (X-ray photoelectron spectroscopy) composition, morphology (microscopy and energy dispersive spectroscopy) and textural properties (N physisorption). The catalytic performance of reduced CuCs@FeBTC and [CuCs@FeBTC]@rGO composites was tested in the CO hydrogenation reaction at 10 bar. Methane and methanol were obtained as valuable reaction products. When using the [CuCs@FeBTC]@rGO aerogel, methanol yield was noticeably high, in comparison to reported data, in the order of 86 mgg h; while the amount of side products (methane, CO) was almost totally hindered up to 260 °C.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

High Q-Factor Plasmonic Surface Lattice Resonances in Colloidal Nanoparticle Arrays

  • Qi, Xiaoyu|||0009-0008-8677-7879
  • Pérez, Luis Alberto|||0000-0003-2802-4891
  • Alonso Carmona, Maria Isabel|||0000-0001-7669-5871
  • Mihi, Agustín|||0000-0003-3821-7881
Surface lattice resonances (SLRs) sustained by ordered metal arrays are characterized by their narrow spectral features, remarkable quality factors, and the ability to tune their spectral properties based on the periodicity of the array. However, the majority of these structures are fabricated using classical lithographic processes or require postannealing steps at high temperatures to enhance the quality of the metal. These limitations hinder the widespread utilization of these periodic metal arrays in various applications. In this work, we use the scalable technique of template-assisted assembly of metal colloids to produce plasmonic supercrystals over centimeter areas capable of sustaining SLRs with high Q factors reaching up to 270. Our approach obviates the need for any postprocessing, offering a streamlined and efficient fabrication route. Furthermore, our method enables extensive tunability across the entire visible and near-infrared spectral ranges, empowering the design of tailored plasmonic resonant structures for a wide range of applications.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

How to switch from a poor PEDOT:X oxygen evolution reaction (OER) to a good one. A study on dual redox reversible PEDOT:metallacarborane

  • Maria Xavier, Jewel Ann
  • Fuentes, Isabel
  • Nuez-Martínez, Miquel
  • Kelemen, Zsolt
  • Andrio, Andreu
  • Viñas, Clara
  • Teixidor, Francesc
  • Compañ Moreno, Vicente|||0000-0001-8233-7472
[EN] Over the years, extensive research has been carried out to optimize the oxygen evolution reaction (OER) by adopting different techniques as well as catalysts. Conducting organic polymers such as PEDOT have been employed to study the reaction but have failed to lower the over-potential for the reaction. Here we show electrochemically made, intimately blended, dual redox reversible materials incorporating PEDOT and metallacarboranes. The metallacarboranes act as doping agents but with tunable E-1/2 potentials. The tunability of E-1/2 allows the overlapping of the two redox potentials which subsequently leads to their synergy. The physico-chemical properties of the metallacarboranes fade and become integrated with PEDOT to form a dual redox reversible system. Therefore, the properties of the dopant are modified by the polymer. Thus, due to its high E-1/2, the Co4+/3+ couple would not be an efficient electrocatalyst for water oxidation but when it is immersed in the PEDOT matrix the Co4+/3+ potential is more accessible so that very low overpotential values are obtained, which justifies the title of the work, How to switch from a poor PEDOT:X oxygen evolution reaction (OER) to a good one. The dual redox reversible system has been extensively characterized and has been shown to be a promising candidate for the water oxidation reaction., Jewel A. M. Xavier and Isabel Fuentes have contributed equally to this work. We gratefully acknowledge the Spanish Ministerio de Economía y Competitividad (PID2019-106832RB-I00) and Generalitat de Catalunya (2017SGR1720). Jewel A. M. Xavier acknowledges the DOC-FAM programme under the Marie Sklodowska-Curie grant agreement no. 754397. This work was also funded by the Spanish Ministry of Science, through the "Severo Ochoa" Programme for Centers of Excellence in R&D (CEX2019-000917-S). Jewel A. M. Xavier and Miquel N. M are enrolled in the PhD program of UAB.
IRTA Pubpro. Open Digital Archive
Publication Artículo científico (JournalArticle)

Activating Thermoplastic Polyurethane Surfaces with Poly(ethylene glycol)-Based Recombinant Human α‑Defensin 5 Monolayers for Antibiofilm Activity

  • Rodríguez Rodríguez, Xavier
  • López-Cano, Adrià
  • Mayolo-Deloisa, Karla
  • Pich, Oscar Q.
  • Bierge, Paula
  • Ventosa, Nora
  • García-de-la-Maria, Cristina
  • Miró, José M.
  • Gasch, Oriol
  • Veciana, Jaume
  • Guasch, Judith
  • Arís, Anna
  • Garcia-Fruitos, Elena
  • Ratera, Imma
  • FUNCATH
Addressing multidrug-resistant microbial infections linked to implantable biomedical devices is an urgent need. In recent years, there has been an active exploration of different surface coatings to prevent and combat drug-resistant microbes. In this research, we present a facile chemical modification of thermoplastic polyurethane (TPU) surfaces with poly(ethylene glycol)-based recombinant human α-defensin 5 (HD5) protein with antimicrobial activity. TPU is one of the most relevant materials used for medical devices with good mechanical properties but also good chemical resistance, which makes it difficult to modify. The chemical modification of TPU surfaces is achieved via a three-step procedure based on (i) TPU activation using hexamethylene diisocyanate (HDI); (ii) interfacial reaction with poly(ethylene glycol) (PEG) derivatives; and finally, (iii) a facile click reaction between the PEG-maleimide terminated assembled monolayers on the TPU and the cysteine (-thiol) termination of the recently designed recombinant human α-defensin 5 (HD5) protein. The obtained PEG based HD5 assembled monolayers on TPU were characterized using a surface science multitechnique approach including scanning electron microscopy, atomic force microscopy, contact angle, and X-ray photoelectron spectroscopy. The modified TPU surfaces with the HD5 protein derivative exhibit broad-spectrum antibacterial properties reducing biofilm formation against Pseudomonas aeruginosa (Gram-negative), methicillin-resistant Staphylococcus aureus (MRSA) (Gram-positive) and methicillin-resistant Staphylococcus epidermidis (MRSE) (Gram-positive). These findings underscore the substantial potential of protein-modified TPU surfaces for applications in combating bacterial infections associated with implantable materials and devices., Financial support by the MICIU of Spain (projects PID2019105622RBI00, PID2020-115296RA-I00, PID2022-137332OBI00, CEX2019-000917-S, CEX2023- 001263-S), CSIC (project 2023AEP092), the Marató de TV3 foundation (project number 201812-30-31-32-33 and 202326-30-31-32-33), and the Generalitat de Catalunya (project SGR Cat 2021-00438 and 2021-01552) is acknowledged. The authors are also grateful for the financial support received from Instituto de Salud Carlos III and the Networking Research Center on Bioengineering, Biomaterials, and Nanomedicine (CIBERBBN). J.G. is grateful to the Max Planck Institute for Medical Research (Heidelberg, Germany) for their collaboration through the Max Planck Partner Group “Dynamic Biomimetics for Cancer Immunotherapy”. ICMAB-CSIC acknowledges support from the Severo Ochoa Programme for Centres of Excellence in R&D (FUNFUTURE, CEX2019-000917-S). J.M.M. received a personal 80:20 research grant from the Institut d’Investigacions Biomediques August Pi i Sunyer (IDIBAPS), Barcelona, Spain, during 2017−24. This work has been developed inside the Materials Science PhD program of Universitat Autonoma de Barcelona. X.R.R. was supported by a grant PTA2021-020955-I funded by MCIN/AEI/10.13039/ 501100011033 and the FSE. This project has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement No. 801342 (Tecniospring INDUSTRY) and the Government of Catalonia’s Agency for Business Competitiveness (ACCIO; TECSPR19-1-0065). A.L.-C. received a predoctoral fellowship from Generalitat de Catalunya (FIAGAUR), and P.B. was supported by a PFIS predoctoral fellowship (FI20/00009) from the Instituto de Salud Carlos III. The authors also acknowledge the ICTS NANBIOSIS for the support of the Biomaterial Processing and Nanostructuring Unit (U6) at ICMAB-CSIC (https://www.nanbiosis.es/ portfolio/u6-biomaterial-processing-and-nanostructuring-unit/, info:eu-repo/semantics/publishedVersion
IRTA Pubpro. Open Digital Archive
Publication Artículo científico (JournalArticle)

A Novel Generation of Tailored Antimicrobial Drugs Based on Recombinant Multidomain Proteins

  • López-Cano, Adrià
  • Ferrer-Miralles, Neus
  • Sánchez, Julieta
  • Carratalá, Jose Vicente
  • Rodriguez Rodriguez, Xavier
  • Ratera, Imma
  • Guasch, Judith
  • Pich, Oscar Q.
  • Bierge, Paula
  • Garcia-de-la-Maria, Cristina
  • Miro, Jose M.
  • Garcia-Fruitos, Elena
  • Alomar, Oscar
Antibiotic resistance has exponentially increased during the last years. It is necessary to develop new antimicrobial drugs to prevent and treat infectious diseases caused by multidrug- or extensively-drug resistant (MDR/XDR)-bacteria. Host Defense Peptides (HDPs) have a versatile role, acting as antimicrobial peptides and regulators of several innate immunity functions. The results shown by previous studies using synthetic HDPs are only the tip of the iceberg, since the synergistic potential of HDPs and their production as recombinant proteins are fields practically unexplored. The present study aims to move a step forward through the development of a new generation of tailored antimicrobials, using a rational design of recombinant multidomain proteins based on HDPs. This strategy is based on a two-phase process, starting with the construction of the first generation molecules using single HDPs and further selecting those HDPs with higher bactericidal efficiencies to be combined in the second generation of broad-spectrum antimicrobials. As a proof of concept, we have designed three new antimicrobials, named D5L37βD3, D5L37D5L37 and D5LAL37βD3. After an in-depth exploration, we found D5L37D5L37 to be the most promising one, since it was equally effective against four relevant pathogens in healthcare-associated infections, such as methicillin-susceptible (MSSA) and methicillin-resistant (MRSA) Staphylococcus aureus, methicillin-resistant Staphylococcus epidermidis (MRSE) and MDR Pseudomonas aeruginosa, being MRSA, MRSE and P. aeruginosa MDR strains. The low MIC values and versatile activity against planktonic and biofilm forms reinforce the use of this platform to isolate and produce unlimited HDP combinations as new antimicrobial drugs by effective means., info:eu-repo/semantics/publishedVersion
IRTA Pubpro. Open Digital Archive
Publication Artículo científico (JournalArticle)

Copy Number Variation on ABCC2-DNMBP Loci Affects the Diversity and Composition of the Fecal Microbiota in Pigs

  • Ramayo-Caldas, Yuliaxis
  • Crespo-Piazuelo, Daniel
  • Morata, Jordi
  • González-Rodríguez, Olga
  • Sebastià, Cristina
  • Castello, Anna
  • Dalmau, Antoni
  • Ramos-Onsins, Sebastian
  • Alexiou, Konstantinos G.
  • Folch, Josep M.
  • Quintanilla, Raquel
  • Ballester, Maria
Genetic variation in the pig genome partially modulates the composition of porcine gut microbial communities. Previous studies have been focused on the association between single nucleotide polymorphisms (SNPs) and the gut microbiota, but little is known about the relationship between structural variants and fecal microbial traits. The main goal of this study was to explore the association between porcine genome copy number variants (CNVs) and the diversity and composition of pig fecal microbiota. For this purpose, we used whole-genome sequencing data to undertake a comprehensive identification of CNVs followed by a genome-wide association analysis between the estimated CNV status and the fecal bacterial diversity in a commercial Duroc pig population. A CNV predicted as gain (DUP) partially harboring ABCC2-DNMBP loci was associated with richness (P = 5.41 × 10−5, false discovery rate [FDR] = 0.022) and Shannon α-diversity (P = 1.42 × 10−4, FDR = 0.057). The in silico predicted gain of copies was validated by real-time quantitative PCR (qPCR), and its segregation, and positive association with the richness and Shannon α-diversity of the porcine fecal bacterial ecosystem was confirmed in an unrelated F1 (Duroc × Iberian) cross. Our results advise the relevance of considering the role of host-genome structural variants as potential modulators of microbial ecosystems and suggest the ABCC2-DNMBP CNV as a host-genetic factor for the modulation of the diversity and composition of the fecal microbiota in pigs. IMPORTANCE A better understanding of the environmental and host factors modulating gut microbiomes is a topic of greatest interest. Recent evidence suggests that genetic variation in the pig genome partially controls the composition of porcine gut microbiota. However, since previous studies have been focused on the association between single nucleotide polymorphisms and the fecal microbiota, little is known about the relationship between other sources of genetic variation, like the structural variants and microbial traits. Here, we identified, experimentally validated, and replicated in an independent population a positive link between the gain of copies of ABCC2-DNMBP loci and the diversity and composition of pig fecal microbiota. Our results advise the relevance of considering the role of host-genome structural variants as putative modulators of microbial ecosystems and open the possibility of implementing novel holobiont-based management strategies in breeding programs for the simultaneous improvement of microbial traits and host performance., The project was funded by the Spanish Ministry of Science and Innovation-State Research Agency (Agencia Española de Investigación (AEI), Spain, 10.13039/501100011033) grants PID2020-112677RB-C21 (M.B.) and PID2021-126555OB-I00 (Y.R.-C.) and the GENE-SWitCH project (https://www.gene-switch.eu) funded by the European Union’s Horizon 2020 research and innovation program under grant agreement 817998 (M.B. and D.C.-P.). S.R.-O. is supported by grant PID2020-119255GB-I00 (Ministerio de Ciencia e Innovación de España (MICINN), Spain) and by the CERCA Program/Generalitat de Catalunya. The Centre for Research in Agricultural Genomics acknowledges financial support from the Spanish Ministry of Economy and Competitiveness through grants SEV-2015-0533 and CEX2019-000917 from the Severo Ochoa Program for Centers of Excellence in R&D 2016 to 2019 and 2020 to 2023 and the European Regional Development Fund. Y.R.-C. is recipient of Ramon y Cajal postdoctoral fellowship RYC2019-027244-I funded by the Spanish Ministry of Science and Innovation. C.S. is funded by AGUAR grant 2020FI_B 00225. D.C.-P., M.B, O.G.-R., R.Q., and Y.R.-C. belonged to a Consolidated Research Group Agencia de Gestión de Ayudas Universitarias y de Investigación de Catalunya (AGAUR), reference 2017SGR-1719., info:eu-repo/semantics/publishedVersion
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Interconnected Donor–Acceptor-Additive Effects on the Microstructure and Device Performance of PM6:Y6 Solar Cells

  • Gutiérrez Fernández, Edgar
  • Harillo-Baños, Albert
  • Solano, Eduardo
  • Bikondoa, Oier
  • Gutierrez, Junkal
  • Tercjak, Agnieszka
  • Campoy-Quiles, Mariano
  • Riera Galindo, Sergi
  • Martín, Jaime
[Abstract] The microstructure of the donor and acceptor materials within a bulk heterojunction is critical to the performance of organic solar cells, significantly influencing charge generation, transport, and overall efficiency and stability. Here, we studied the role of the donor[thin space (1/6-em)]:[thin space (1/6-em)]acceptor ratio and the use of additives on the resulting microstructure in films and devices based on PM6[thin space (1/6-em)]:[thin space (1/6-em)]Y6. A detailed study of the resulting structures, mainly by X-ray scattering, indicates that the molecular arrangement leading to higher efficiencies is correlated with the presence of a single, well-mixed phase. In this phase, the diffusion of the Y6 molecules is constrained within the PM6 matrix. Interestingly, this microstructure can be achieved either by tuning the composition or by incorporating a solvent additive. Consequently, either approach can be employed to enhance photovoltaic performance., J. M and E. G-F. acknowledge support from the European Union's Horizon 2020 research and innovation program, H2020-FETOPEN-01-2018-2020 “LION-HEARTED”, grant agreement no. 828984. J. M. thanks MICINN for the grant Ref. PID2021-126243NB-I00 and the European Research Council ERC-CoG with reference 101086805. We also acknowledge Ana Martinez Amesti, technician in Electron Microscopy at UPV/EHU, and the teams of the NCD-SWEET beamline at ALBA synchrotron and the XMaS/BM28 beamline at the European Synchrotron. XMaS is a UK national research facility supported by EPSRC. S. R.-G. is thankful to the Marie Sklodowska-Curie Actions (H2020-MSCA-IF-2020) for grant agreement no. 101025608, IDEAL. The authors also thank the financial support of the Spanish Ministerio de Ciencia, Innovación y Universidades, under Grants PID2021-128924OB-I00, TED2021-131911B-I00, and CEX2019-000917-S in the framework of the Spanish Severo Ochoa Centre of Excellence.
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Design Rules for Polymer Blends with High Thermoelectric Performance

  • Zapata-Arteaga, Osnat
  • Marina, Sara
  • Zuo, Guangzheng
  • Xu, Kai
  • Dörling, Bernhard
  • Pérez, Luis Alberto
  • Reparaz, Juan Sebastian
  • Martín, Jaime
  • Kemerink, Martijn
  • Campoy-Quiles, Mariano
[Abstract] A combinatorial study of the effect of in-mixing of various guests on the thermoelectric properties of the host workhorse polymer poly[2,5-bis(3-tetradecylthiophen- 2-yl)thieno[3,2-b]thiophene] (PBTTT) is presented. Specifically, the composition and thickness for doped films of PBTTT blended with different polymers are varied. Some blends at guest weight fractions around 10–15% exhibit up to a fivefold increase in power factor compared to the reference material, leading to zT values around 0.1. Spectroscopic analysis of the charge-transfer species, structural characterization using grazing-incidence wide-angle X-ray scattering, differential scanning calorimetry, Raman, and atomic force microscopy, and Monte Carlo simulations are employed to determine that the key to improved performance is for the guest to promote long-range electrical connectivity and low disorder, together with similar highest occupied molecular orbital levels for both materials in order to ensure electronic connectivity are combined., The authors acknowledge financial support from the Spanish Ministry of Science and Innovation through the Severo Ochoa’ Program for Centers of Excellence in R&D (No. CEX2019-000917-S) and projects PGC2018-095411- B-I00, PGC2018-094620-A-I00, and MAT2017-90024-P (TANGENTS)-EI/Fondo Europeo de Desarrollo Regional and from the European Research Council (ERC) under Grant Agreements Nos. 648901 and 963954. J.M. thanks Ministerio de Ciencia, Innovación y Universidades for the Ramón y Cajal contract. The authors are thankful to Dr. Agustín Mihi for access and support with the FTIR equipment. The authors acknowledge the European funding (European Regional Development Fund and European Social Fund). The authors thank Andrés Gómez Rodríguez from the Scanning Probe Microscopy Laboratory (ICMAB-CSIC) for a set of fine AFM measurements. GIWAXS experiments were performed at NCD-SWEET beamline at ALBA Synchrotron with the collaboration of ALBA staff. Finally, the authors acknowledge the support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unidad de Recursos de Información Científica para la Investigación (URICI). M.K. thanks the Carl Zeiss Foundation for financial support. G.Z. acknowledges the support from Alexander von Humboldt Foundation
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Polymorphism in Non-Fullerene Acceptors Based on Indacenodithienothiophene

  • Marina, Sara
  • Scaccabarozzi, Alberto D.
  • Gutiérrez Fernández, Edgar
  • Solano, Eduardo
  • Khirbat, Aditi
  • Ciammaruchi, Laura
  • Iturrospe, Amaia
  • Balzer, Alex
  • Yu, Liyang
  • Gabirondo, Elena
  • Monnier, Xavier
  • Sardón, Haritz
  • Anthopoulos, Thomas D.
  • Caironi, Mario
  • Campoy-Quiles, Mariano
  • Müller, Christian
  • Cangialosi, Daniele
  • Stingelin, Natalie
  • Martín, Jaime
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract] Organic solar cells incorporating non-fullerene acceptors (NFAs) have reached remarkable power conversion efficiencies of over 18%. Unlike fullerene derivatives, NFAs tend to crystallize from solutions, resulting in bulk heterojunctions that include a crystalline acceptor phase. This must be considered in any morphology-function models. Here, it is confirmed that high-performing solution-processed indacenodithienothiophene-based NFAs, i.e., ITIC and its derivatives ITIC-M, ITIC-2F, and ITIC-Th, exhibit at least two crystalline forms. In addition to highly ordered polymorphs that form at high temperatures, NFAs arrange into a low-temperature metastable phase that is readily promoted via solution processing and leads to the highest device efficiencies. Intriguingly, the low-temperature forms seem to feature a continuous network that favors charge transport despite of a poorly order along the π–π stacking direction. As the optical absorption of the structurally more disordered low-temperature phase can surpass that of the more ordered polymorphs while displaying comparable—or even higher—charge transport properties, it is argued that such a packing structure is an important feature for reaching highest device efficiencies, thus, providing guidelines for future materials design and crystal engineering activities., This work was supported by the Ministerio de Ciencia e Innovacion/FEDER (under Ref. PGC2018-094620-A-I00 and PGC2018-095411-B-I00, CEX2019-000917-S, and PGC2018-095411-B-100) and the Basque Country Government (Ref. PIBA19-0051). S.M. is grateful to POLYMAT for the doctoral scholarship. The authors thank A. Arbe, A. Alonso-Mateo, and L. Hueso for their support and access to characterization tools. The authors also thank the technical and human support provided by SGIker of UPV/EHU and European funding (ERDF and ESF). GIWAXS experiments were performed at BL11 NCD-SWEET beamline at ALBA Synchrotron (Spain) with the collaboration of ALBA staff. J.M and E.F.-G. acknowledge support through the European Union's Horizon 2020 research and innovation program, H2020-FETOPEN 01-2018-2020 (FET-Open Challenging Current Thinking), “LION-HEARTED,” Grant Agreement No. 828984. J.M and N.S. would like to thank the financial support provided by the IONBIKE RISE project, which received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie Grant Agreement No. 823989. N.S., A.K., and A.B. furthermore are grateful to the U.S. National Science Foundation (NSF) for support via Project No. 1905901 within NSF's Division of Materials Research. A.S. and M.C. acknowledge financial support by the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program “HEROIC,” Grant Agreement No. 638059. This work was partially carried out at Polifab, the micro- and nanotechnology center of the Politecnico di Milano. C.M. thanks the Knut and Alice Wallenberg Foundation for funding through the project “Mastering Morphology for Solution-borne Electronics.” A.I. thanks MICINN for a Personal Técnico de Apoyo contract (PTA2017-14359-I) and gratefully acknowledge the financial support of the Basque Government (Research Groups IT-1175-19) and the MICINN (PGC2018-094548-B-I00, MCIU/AEI/FEDER, UE. Funding for open access charge: Universidade da Coruña/CISUG., Gobierno Vasco; PIBA19-0051, Gobierno Vasco; IT-1175-19, Estados Unidos. National Science Foundation; 1905901
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

A Universal, Highly Stable Dopant System for Organic Semiconductors Based on Lewis-Paired Dopant Complexes

  • Zapata-Arteaga, Osnat
  • Perevedentsev, Aleksandr
  • Prete, Michela
  • Busato, Stephan
  • Floris, Paolo Sebastiano
  • Asatryan, Jesika
  • Rurali, Riccardo
  • Martín, Jaime
  • Campoy-Quiles, Mariano
[Abstract]: Chemical doping of organic semiconductors is an essential enabler for applications in electronic and energy-conversion devices such as thermoelectrics. Here, Lewis-paired complexes are advanced as high-performance dopants that address all the principal drawbacks of conventional dopants in terms of limited electrical conductivity, thermal stability, and generality. The study focuses on the Lewis acid B(C6F5)3 (BCF) and 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ) bearing Lewis-basic −CN groups. Due to its high electron affinity, BCF:F4TCNQ dopes an exceptionally wide range of organic semiconductors, over 20 of which are investigated. Complex activation and microstructure control lead to conductivities for poly(3-hexylthiophene) (P3HT) exceeding 300 and 900 S cm–1 for isotropic and chain-oriented films, respectively, resulting in a 10 to 50 times larger thermoelectric power factor compared to those obtained with neat dopants. Moreover, BCF:F4TCNQ-doped P3HT exhibits a 3-fold higher thermal dedoping activation energy compared to that obtained with neat dopants and at least a factor of 10 better operational stability., We thank Martin Kreuzer for extensive support and fruitful discussions at the Alba synchrotron BL01-MIRAS beamline. Jiali Guo and Dr. Edgar Gutierrez are also thanked for their support with the Alba experiments. We also thank Prof. Walter Caseri and Dr Marco D’Elia (Department of Materials, ETH Zürich) for generously contributing samples of poly(phenylene methylene)s as well as the many stimulating discussions. Dr Agustín Mihi (ICMAB-CSIC) is thanked for providing access to the Bruker IR spectrophotometry equipment. This work was financially supported by the European Commission through the Marie Skłodowska-Curie project HORATES (GA- 955837), by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) under grants PID2020-119777GB-I00, PID2021-128924OB-I00 and the Severo Ochoa Centres of Excellence Program under grant CEX2019-000917-S (particularly, PALOMA grant within ICMAB’s ‘Frontier Interdisciplinary Projects’ (FIP-2021) Program), and by the Generalitat de Catalunya under grant no. 2017 SGR 1506. The work of PSF has been carried out within the PhD program in Physics of the Universitat Autònoma de Barcelona (UAB). We thank the Centro de Supercomputación de Galicia (CESGA) for the use of their computational resources., Generalitat de Catalunya; 2017-SGR-1506
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Comparing the Microstructure and Photovoltaic Performance of 3 Perylene Imide Acceptors With Similar Energy Levels but Different Packing Tendencies

  • Adel, Rana
  • Gala, Elena
  • Alonso Navarro, Matías Jesús
  • Gutiérrez Fernández, Edgar
  • Martín, Jaime
  • Stella, Marco
  • Martínez-Ferrero, Eugenia
  • De la Peña, Alejandro
  • Harbuzaru Harbuzaru, Alexandra
  • Ramos, M.Mar
  • Ponce Ortiz, Rocío
  • Segura, José L.
  • Campoy-Quiles, Mariano
[Abstract] While it is widely recognized that microstructure plays an important role in the performance of organic photovoltaics (OPV), systematic studies are often challenging, as varying the molecular packing through typical chemical means (such as sidechain tuning) often affects the molecular energy levels, thus preventing a clear correlation. In this work we present the synthesis of three perylene imide (PI) based electron acceptors with almost identical energy levels, but distinct packing tendencies. We confirm our initial hypothesis by measuring solution and solid-state absorption, and cyclic voltammetry as well as characterizing the films by grazing incidence wide angle X-ray scattering (GIWAXS). In a second step, we repeat the characterization of the three materials in blends with two polymer donors, namely PCDTBT or PBDBT, whose energy levels are well aligned with those of the PI acceptors, and which, additionally, exhibit different degrees of structural order. We show how the initial strong difference between acceptors is partially blurred in blends, but still critical. Finally, we correlate our structural data with OPV devices made with the corresponding six blends. Our data suggest that a good donor acceptor marriage should ensure good energy alignment but also exhibit complementary crystallization tendencies of the two components., The authors acknowledge financial support from the Spanish Ministry of Science and Innovation through the Severo Ochoa Program for Centers of Excellence in R&D (No. CEX2019-000917-S), and projects PGC2018-095411-B-I00, PID2019-106268GB-C33 and PID2019-110305GB-I00, as well as the European Commission through the Horizon 2020 Marie Sklodowska-Curie ITN Programme, SEPOMO, Grant Number: 722651, and the UCM (INV.GR.00.1819.10759). E. G. specially acknowledges Comunidad de Madrid and Universidad Complutense de Madrid for a post-doctoral contract (CT20/19-CT21/19/PEJD-2018-POST/IND-8661PAI). M. J. A. N. acknowledges URJC for a post-doctoral contract. R. P. O. and A. H. also acknowledge support from Junta de Andalucía (project UMA18-FEDERJA-080). We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI), Universidad Complutense de Madrid; INV.GR.00.1819.10759, Universidad Complutense de Madrid; CT20/19-CT21/19/PEJD-2018-POST/IND-8661PAI, Junta de Andalucía; UMA18-FEDERJA-080
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Chiral Conducting Me-EDT-TTF and Et-EDT-TTFBased Radical Cation Salts with the Perchlorate Anion

  • Mroweh, Nabil
  • Auban-Senzier, Pascale
  • Vanthuyne, Nicolas
  • Lopes, Elsa B.
  • Almeida, Manuel
  • Canadell, Enric
  • Avarvari, Narcis
Introduction of chirality in the field of molecular conductors has received increasing interest in recent years in the frame of modulation of the crystal packing, and hence conducting properties, with the number of stereogenic centers and absolute configuration, e.g., racemic or enantiopure forms. Here, we describe the preparation by electrocrystallization of chiral radical cation salts, based on the donors methyl-ethylenedithio-tetrathiafulvalene (Me-EDT-TTF) 1 and ethyl-ethylenedithio-tetrathiafulvalene (Et-EDT-TTF) 2 containing one stereogenic center, with the perchlorate anion. Donor 1 provided the series of crystalline materials [(rac)-1]ClO4, [(S)-1]2ClO4 and [(R)-1]2ClO4, while for donor 2 only the 1:1 salts [(rac)-2]ClO4 and [(R)-2]ClO4 could be prepared as suitable single crystals for X-ray analysis. The enantiopure salts of 1 show b-type packing and metallic conductivity in the high temperature regime, with room temperature conductivity values of 5–10 S cm−1, whereas compound [(rac)-2]ClO4 is a very poor semiconductor. Tight-binding extended Hückel band structure calculations support the metallic conductivity of the enantiopure salts of 1 and suggest that small structural changes, possibly induced by thermal contraction or pressure, could lead to a pseudo-elliptic closed Fermi surface, typical for a 2D metal., This work was supported in France by the CNRS and the University of Angers. The collaboration between the Portuguese and French team members was also supported by a FCT – French Ministry of Foreign Affairs bilateral action FCT/PHC-PESSOA 2020-21 (Project 44647UB)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Influence of polymer binder on the performance of diF-TES-ADT based organic field effect transistor

  • Salzillo, Tommaso
  • D’Amico, Francesco
  • Montes, Nieves
  • Pfattner, Raphael
  • Mas Torrent, Marta
The presented work concerns the study of solution sheared organic thin film transistors based on a 2,8-difluoro-5,11-bis(triethylsilylethynyl)anthradithiophene (diF-TES-ADT) polymer blend. Four different polymer binders were tested (i.e., polystyrene 10K and 100K g/mol and poly(methyl methacrylate) 25K and 120K g/mol) in order to investigate the influence of the polymer binder nature and its molecular weight on the thin film morphology and device performance. Structural analysis by X-ray and Raman spectroscopy combined with Atomic Force Microscopy (AFM) and polarized optical microscopy were used for a complete characterization of the thin films. Additionally, resonance Raman spectroscopy elucidated the isomeric composition of the thin film devices and the different interactions of the organic semiconductor with the polymer binders., This work was funded by DGI (Spain) project FANCY CTQ2016- 80030-R and GENESIS PID2019-111682RB-I00, the Generalitat de Catalunya (2017-SGR-918), and the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centers of Excellence in R&D (FUNFUTURE CEX2019-000917-S)). T.S. acknowledges the H2020-MSCACOFUND-2014 Programme (P-SPHERE, Grant agreement 665919). The authors acknowledge the Central European Research Infrastructure Consortium (CERIC-ERIC) consortium for the access to experimental facilities at the ElettraSincrotrone Trieste, (Proposal number: 20187028)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of the organic semiconductor side groups on the structural and electronic properties of their interface with dopants

  • Babuji, Adara
  • Silvestri, Francesco
  • Pithan, Linus
  • Richard, Audrey
  • Geerts, Yves Henry
  • Tessler, Nir
  • Solomeshch, Olga
  • Ocal, Carmen
  • Barrena, Esther
Two derivatives of [1]benzothieno[3,2-b][1]benzothiophene (BTBT), namely, 2,7-dioctyl-BTBT (C8-BTBT) and 2,7-diphenyl-BTBT (DPh-BTBT), belonging to one of the best performing organic semiconductor (OSC) families, have been employed to investigate the influence of the substitutional side groups on the properties of the interface created when they are in contact with dopant molecules. As a molecular p-dopant, the fluorinated fullerene C60F48 is used because of its adequate electronic levels and its bulky molecular structure. Despite the dissimilarity introduced by the OSC film termination, dopant thin films grown on top adopt the same (111)-oriented FCC crystalline structure in the two cases. However, the early stage distribution of the dopant on each OSC film surface is dramatically influenced by the group side, leading to distinct host–dopant interfacial morphologies that strongly affect the nanoscale local work function. In this context, Kelvin probe force microscopy and photoelectron emission spectroscopy provide a comprehensive picture of the interfacial electronic properties. The extent of charge transfer and energy level alignment between OSCs and dopant are debated in light of the differences in the ionization potential of the OSC in the films, the interface nanomorphology, and the electronic coupling with the substrate., This work has been funded by the Spanish Government through projects PID2019-110907GB-I00, MAT2016-77852-C2-1-R (AEI/FEDER, UE), and the “Severo Ochoa” Programme for Centers of Excellence in R&D (CEX2019-000917-S). We thank the 2017-SGR668 recognition. A.B. thanks the Spanish Government financial support through BES-2016-077519 FPI fellowship. F.S. acknowledges the European Union’s Horizon 2020 Research and Innovation Program under grant agreement no. 730872 and the Marie Skłodowska-Curie grant agreement no. 722651 (SEPOMO project). This work has been carried out within the framework of the doctoral program (PhD) of Material Science (Department of Physics) of the Universitat Autònoma de Barcelona (UAB). O.S. acknowledges the support of the Israel Ministry of Science, the Center for Absorption in Science of the Ministry of Immigrant Absorption, the Committee for Planning and budgeting of the Council for Higher Education under the framework of the KAMEA Program. Y.H.G. is thankful to the Belgian National Fund for Scientific Research (FNRS) for financial support through research projects BTBT no. 2.4565.11, Phasetrans no. T.0058.14, Pi-Fast no. T.0072.18, and 2Dto3D no. 30489208. Financial supports from the French Community of Belgian (ARC no. 20061) are also acknowledged. A.R. acknowledges doctoral fellowship support from the FRIA. We thank the European Synchrotron Radiation Facility (ESRF) for providing access to ID03 for the time of the experiment. We are indebted to G. Sauthier from the ICN2 Photoemission Spectroscopy Facility., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Characterization of crystalline forms of gaxilose, a diagnostic drug

  • Catti, Federica
  • Hernández Gallego, Santos
  • Benito, Mónica
  • Molins, Elies
  • Marquillas, Francisco
Lactose intolerance is a pathology caused by lactase enzyme deficiency, usually produced in the intestinal cells provoking symptoms as abdominal pain, bloating, diarrhea, gas and nausea. Gaxilose, 4-O-β-D galactopyranosyl-d-xylose, is used as a diagnostic drug for a non-invasive method for hypolactasia diagnosis. To date, no definitive guide for identifying gaxilose and distinguishing between crystalline forms is available. Data have been collected from a number of different analytical techniques in order to provide a full characterization of the compound and a simple method to discriminate between two solid forms., E. Molins and M. Benito thank to Severo Ochoa FunFuture project (MICINN, CEX2019-917S) and Generalitat de Catalunya (2017SGR1687)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Comparing different geometries for photovoltaic-thermoelectric hybrid devices based on organics

  • Jurado, José Piers
  • Dörling, Bernhard
  • Zapata Arteaga, Osnat
  • Goñi, Alejandro R.
  • Campoy Quiles, Mariano
Coupling thermoelectrics (TE) with photovoltaics (PV) has emerged as an approach to solid-state solar harvesting, directly converting light and infrared heat into electricity. In this work, we compare PV-TE hybrid devices based on organic semiconductors in three different geometries: a reflection geometry, a non-contact transmission geometry, and a contact transmission geometry. The temperature rises of films of common organic thermoelectric materials, including poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS), single-walled carbon nanotubes (swCNT), and poly[2,5-bis(3-tetradecylthiophen-2-yl)thieno[3,2-b]thiophene] (PBTTT), were measured in configurations representative of the proposed geometries. Because organic semiconductors possess broadband light absorption and low thermal conductivities, a significant rise in temperature was observed under illumination for all geometries. We find, however, that the best configuration is, in fact, the transmission contact mode because it sums two effects. Operating under 1 sun illumination, the temperature of a commercial organic PV module increased by ≈30 K, which leads to an enhancement in OPV performance compared to room temperature. After attaching a thermoelectric to the OPV module, losses from convection are reduced, and the OPV module heats up even more, further increasing its efficiency while additionally enabling thermoelectric generation. Finally, we calculate theoretical thermoelectric efficiencies for the materials and their respective power densities., The authors acknowledge financial support from the Spanish Ministry Science and Innovation through the “Severo Ochoa” Program for Centers of Excellence in R&D SEV-2015-0496 (FUNMAT) and CEX2019-000917-S (FUNFUTURE), and PGC2018-095411-B-I00 (RAINBOW) projects; from the Generalitat de Catalunya through grants 2017SGR488 and AGAUR 2018 PROD 00191; and from the European Research Council (ERC) under grant agreement no. 648901. This project has received funding from the European Union's Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement no. 713673. J. P. J. has received financial support through the “la Caixa” INPhINIT Fellowship Grant for Doctoral studies at Spanish Research Centers of Excellence (Grant code: LCF/BQ/IN17/11620035), “la Caixa” Banking Foundation (ID100010434), Barcelona, Spain. O. Z. A. acknowledges CONACYT-SENER for his PhD scholarship (no. 472571). J. P. J. acknowledges the departments of Physics, Chemistry and Geology of the Autonomous University of Barcelona (UAB) as coordinators of the PhD programme in Materials Science. The authors thank Dr A. Roig, Dr A. Laromaine and Dr D. Abol-Fotouh (ICMAB-CSIC) for the CNT:cellulose sample preparation and fruitful discussions. The authors thank Dr Aleksandr Perevedentsev for his help with sample preparation, and Mr Pau Molet for his help with the FTIR measurements. We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tuning the Liquid Crystallinity of Cholesteryl-o-Carborane Dyads: Synthesis, Structure, Photoluminescence, and Mesomorphic Properties

  • Ferrer Ugalde, Albert
  • González Campo, Arántzazu
  • Giner Planas, José
  • Viñas, Clara
  • Teixidor, Francesc
  • Sáez, Isabel M.
  • Núñez Aguilera, Rosario
A set of mesomorphic materials in which the <i>o</i>-carborane cluster is covalently bonded to a cholesteryl benzoate moiety (mesogen group) through a suitably designed linker is described. The olefin cross-metathesis between appropriately functionalized styrenyl-<i>o</i>-carborane derivatives and a terminal alkenyl cholesteryl benzoate mesogen (all type I terminal olefins) leads to the desired <i>trans</i>-regioisomer, which is the best-suited configuration to obtain mesomorphic properties in the final materials. The introduction of different substituents (R = H (<b>M2</b>), Me (<b>M3</b>), or Ph (<b>M4</b>)) to one of the carbon atoms of the <i>o</i>-carborane cluster (C<sub>cluster</sub>) enables the tailoring of liquid crystalline properties. Compounds <b>M2</b> and <b>M3</b> show the chiral nematic (N*) phase, whereas <b>M4</b> do not show liquid crystal behavior. Weaker intermolecular interactions in the solid <b>M3</b> with respect to those in <b>M2</b> may allow the liquid crystallinity in <b>M3</b> to be expressed as enantiotropic behavior, whereas breaking the stronger intermolecular interaction in the solid state of <b>M2</b> leads directly to the isotropic state, resulting in monotropic behavior. Remarkably, <b>M3</b> also displays the blue phase, which was observed neither in the chiral nematic precursor nor in the styrenyl-cholesterol model (<b>M5</b>) without an <i>o</i>-carborane cluster, which suggests that the presence of the cluster plays a role in stabilizing this highly twisted chiral phase. In the carborane-containing mesogens (<b>M2</b> and <b>M3</b>), the <i>o</i>-carborane cluster can be incorporated without destroying the helical organization of the mesophase., This research was funded by MICINN grants (PID2019-106832RB-100 and CEX2019-000917-S) and Generalitat de Catalunya (2017/SGR/1720)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Critical Effect of Bottom Electrode on Ferroelectricity of Epitaxial Hf0.5Zr0.5O2 Thin Films

  • Estandía, Saúl
  • Gázquez, Jaume
  • Varela, María
  • Dix, Nico
  • Qian, Mengdi
  • Solanas, Raul
  • Fina, Ignasi
  • Sánchez Barrera, Florencio
Epitaxial orthorhombic Hf0.5Zr0.5O2 (HZO) films on La0.67Sr0.33MnO3 (LSMO) electrodes show robust ferroelectricity, with high polarization, endurance and retention. However, no similar results have been achieved using other perovskite electrodes so far. Here, LSMO and other perovskite electrodes are compared. A small amount of orthorhombic phase and low polarization is found in HZO films grown on La-doped BaSnO3 and Nb-doped SrTiO3, while null amounts of orthorhombic phase and polarization are detected in films on LaNiO3 and SrRuO3. The critical effect of the electrode on the stabilized phases is not consequence of differences in the electrode lattice parameter. The interface is critical, and engineering the HZO bottom interface on just a few monolayers of LSMO permits the stabilization of the orthorhombic phase. Furthermore, while the specific divalent ion (Sr or Ca) in the manganite is not relevant, reducing the La content causes a severe reduction of the amount of orthorhombic phase and the ferroelectric polarization in the HZO film., Financial support from the Spanish Ministry of Science and Innovation, through the Severo Ochoa FUNFUTURE (CEX2019- 000917-S) and the MAT2017-85232-R (AEI/FEDER, EU), and PID2019- 107727RB-I00 (AEI/FEDER, EU) projects, and from Generalitat de Catalunya (2017 SGR 1377) is acknowledged. IF and JG acknowledge Ramón y Cajal contracts RYC-2017-22531 and RYC-2012-11709, respectively. IF acknowledges Beca Leonardo from Fundación BBVA. SE acknowledges the Spanish Ministry of Economy, Competitiveness and Universities for his PhD contract (SEV-2015-0496-16-3) and its cofunding by the ESF. SE work has been done as a part of his Ph.D. program in Materials Science at Universitat Autònoma de Barcelona. Electron microscopy observations carried out at the Centro Nacional de Microscopía Electrónica at UCM (MV) supported by MICINN grant# RTI2018-097895-B-C43., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Radiolabeled Cobaltabis(dicarbollide) Anion–Graphene Oxide Nanocomposites for In Vivo Bioimaging and Boron Delivery

  • Ferrer Ugalde, Albert
  • Sandoval, Stefania
  • Pulagam, Krishna Reddy
  • Muñoz Juan, Amanda
  • Laromaine, Anna
  • Llop, Jordi
  • Tobias, Gerard
  • Núñez Aguilera, Rosario
A carbon-based hybrid nanocomposite, which consists of monoiodinated boron-cluster derivatives covalently attached to graphene oxide, is hereby introduced. This GO-I-COSAN has been synthesized using a novel boron-rich cobaltabis(dicarbollide) precursor with one iodide group attached to one of the boron atoms of the cluster (I-COSAN) and designed to be subsequently labeled with radioactive 124I for its use in positron emission tomography (PET). In vitro cytotoxicity studies of GO-I-COSAN with HeLa cells at different concentrations up to 48 h proved that the cell mortality was lower than 10%, indicating minimal cytotoxicity of the nanomaterial. Remarkably, internalization of the nanomaterial by cells was confirmed by transmission electron microscopy, which indicated its accumulation in the cytoplasm, without causing changes in either the size or morphology of the cells. Additionally, in vivo tests using Caenorhabditis elegans confirmed that GO-I-COSAN could be ingested by the worms, showing no significant damage and very low toxicity, which supports the results observed in the in vitro studies. Radioisotopic labeling of I-COSAN using a palladium-catalyzed isotopic exchange reaction with Na[124I]I and its subsequent functionalization onto GO was performed successfully, leading to formation of the radioactive nanocomposite GO-[124I]I-COSAN, which was quickly injected in mice. PET images at different times revealed excellent in vivo stability of the developed nanomaterial. No activity in thyroid and stomach was observed even at long times, proving that iodide did not detach from the material. GO-[124I]I-COSAN presented a favorable biodistribution profile, being mainly accumulated in the liver and slightly in the lung, with a long residence time on blood and progressive elimination via the gastrointestinal tract. It is noteworthy that the high boron content of this material paves the way toward theranostics because it benefits of a traceable boron delivery for boron neutron capture therapy., This work was supported by the Spanish Ministry of Science and Innovation MICINN, through the Severo Ochoa Program for Centers of Excellence FUNFUTURE (CEX2019-000917- S), for funding with an internal Severo Ochoa FIP project. J.L. thanks the Spanish Ministry of Economy and Competitiveness for funding through Grant CTQ2017-87637-R. Part of the work was conducted under the Maria de Maeztu Units of Excellence Programme (Grant MDM-2017-0720). A.M.-J. and A.L. are thankful for financial support from the Spanish Ministry of Science and Innovation through Project RTI2018- 096273-B-I00 and a Ph.D. scholarship for A.M.J. (FPU18/ 05190) and the Generalitat de Catalunya with Projects 2017SGR765 and 2017SGR581. A.M.-J. and A.L. participated in the MICINN, “Research Networks” nanoCARE (RED2018- 102469-T). This work has been conducted within the Biotechnology Doctoral Program of the Autonomous University of Barcelona (A.M.J). The authors thank the staff from the Servei de Cultius Cel·lulars and Servei de Microscopia, ̀ both at the UAB, for performing the cytotoxicity studies, cellular uptake analysis, and HRTEM., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Large-Scale Soft-Lithographic Patterning of Plasmonic Nanoparticles

  • Chiang, Naihao
  • Scarabelli, Leonardo
  • Vinnacombe-Willson, Gail A.
  • Pérez, Luis Alberto
  • Dore, Camilla
  • Mihi, Agustín
  • Jonas, Steven J.
  • Weiss, Paul S.
Micro- and nanoscale patterned monolayers of plasmonic nanoparticles were fabricated by combining concepts from colloidal chemistry, self-assembly, and subtractive soft lithography. Leveraging chemical interactions between the capping ligands of pre-synthesized gold colloids and a polydimethylsiloxane stamp, we demonstrated patterning gold nanoparticles over centimeter-scale areas with a variety of micro- and nanoscale geometries, including islands, lines, and chiral structures (e.g., square spirals). By successfully achieving nanoscale manipulation over a wide range of substrates and patterns, we established a powerful and straightforward strategy, nanoparticle chemical lift-off lithography (NP-CLL), for the economical and scalable fabrication of functional plasmonic materials with colloidal nanoparticles as building blocks, offering a transformative solution for designing next-generation plasmonic technologies., The authors would like to thank the Nanoquim clean room facility at ICMAB-CSIC and, in particular, Dr. Luigi Morrone for help with the use of the microwriter for master preparation. We acknowledge the CNSI-EICN, ICMAB-CSIC, and ICN2 electron microscopy facilities for TEM and SEM imaging, WiTEC for access to their microscopy instrumentation, and Dr. Thomas Young and Michael Mellody for the preparation of silicon masters. Special thanks to Dr. Leonora Velleman for the fruitful discussion on nanoparticle self-assembly. L.S. research is supported by the Marie Sklodowska-Curie Actions SHINE (H2020-MSCA-IF-2019, grant agreement No. 894847) and the 2020 Post-doctoral Junior Leader-Incoming Fellowship by “la Caixa” Foundation (ID 100010434, fellowship code LCF/BQ/PI20/11760028). L.A.P. thanks the Marie Sklodowska-Curie Actions (H2020-MSCA-IF-2018) for grant agreement No. 839402, PLASMIONICO. L.S., L.A.P., C.D., and A.M. acknowledge funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (Grant Agreement No. 637116, ENLIGHTMENT). ICMAB acknowledges the Spanish Ministry of Economy and Competitiveness under grants PID2019-106860GB-I00 (AEI/FEDER, UE) and FUNFUTURE (CEX2019-000917-S) center of excellence Severo Ochoa program. This work has been performed in the framework of the doctorate in Materials Science of the Autonomous University of Barcelona. N.C. thanks the NIH NIBIB Pathway to Independence Award (K99EB028325) for support. S.J.J. is supported by the NIH Common Fund through a NIH Director’s Early Independence Award co-funded by the National Institute of Dental and Craniofacial Research and Office of the Director, NIH Grant DP5OD028181. S.J.J. also acknowledges Young Investigator Award funds from the Alex’s Lemonade Stand Foundation for Childhood Cancer Research and the Hyundai Hope on Wheels Foundation for Pediatric Cancer Research. P.S.W. thanks the National Science Foundation (2004238) for support of this work. Funds for core facility use were provided via a support voucher awarded to N.C. and S.J.J. via the UCLA Clinical and Translational Science Institute (CTSI) Core Voucher Program, which is administered through Grant Number UL1TR001881., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nanorods Based on Mesoporous Silica Containing Iron OxideNanoparticles as Catalytic Nanomotors: Study of Motion Dynamics

  • Mestre, Rafael
  • Cadefau, Núria
  • Hortelão, Ana C.
  • Grzelak, Jan Jacek
  • Gich, Martí
  • Roig Serra, Anna
  • Sánchez, Samuel
Self‐propelled particles and, in particular, those based on mesoporous silica, have raised considerable interest due to their potential applications in the environmental and biomedical fields thanks to their biocompatibility, tunable surface chemistry and large porosity. Although spherical particles have been widely used to fabricate nano‐ and micromotors, not much attention has been paid to other geometries, such as nanorods. Here, we report the fabrication of self‐propelled mesoporous silica nanorods (MSNRs) that move by the catalytic decomposition of hydrogen peroxide by a sputtered Pt layer, Fe2O3 nanoparticles grown within the mesopores, or the synergistic combination of both. We show that motion can occur in two distinct sub‐populations characterized by two different motion dynamics, namely enhanced diffusion or directional propulsion, especially when both catalysts are used. These results open up the possibility of using MSNRs as chassis for the fabrication of self‐propelled particles for the environmental or biomedical fields., R.M. thanks “la Caixa” Foundation through IBEC International PhD Programme “la Caixa” Severo Ochoa fellowships (code LCF/BQ/SO16/52270018). A.C.H. thanks MINECO for the Severo Ochoa PhD fellowship. J.G. has received financial support through the “la Caixa” INPhINIT Fellowship Grant for Doctoral Studies at Spanish Research Centers of Excellence (Grant code: LCF/BQ/DI17/11620041), “la Caixa” Banking Foundation (ID100010434), Barcelona, Spain. The CERCA program by the Generalitat de Catalunya, the Secretaria d′Universitats i Recerca del Departament d′Empresa i Coneixement de la Generalitat de Catalunya through the projects 2017SGR1148 & 2017SGR765 are acknowledged, as well as the Ministerio de Ciencia, Innovación y Universidades (MCIU)/Agencia Estatal de Investigación (AEI)/Fondo Europeo de Desarrollo Regional (FEDER, UE) through the projects RTI2018‐098164‐B‐I00 & RTI2018‐096273‐B‐I00 and Severo Ochoa Programme for Centres of Excellence in R&D (CEX2019‐000917‐S and CEX2018‐000789‐S). This project has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (grant agreement No 866348)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Tesis doctoral (DoctoralThesis)

In vivo interactions between food availability and nanoparticles in Caenorhabditis elegans

  • Luo, Zhongrui
During the last decades, nanoparticles (NPs) have been widely used in various fields, especially in medical applications such as drugs, imaging agents, and drug-delivery carriers. However, they also raised public concerns regarding the potential adverse influences on human health. Collective efforts from worldwide researchers in materials and biological science have been invested in investigating the toxicity mechanisms of different NPs. In this thesis, we dedicated major efforts to apply (Caenorhabditis elegans) C. elegans as a robust and simple model organism for toxicity assessments of assorted NPs. The general objective of this thesis was to study effects of food availability on nano-bio interactions between superparamagnetic iron oxide nanoparticles (SPIONs) or 10 nm AuNPs and C. elegans, and prove that this small animal can be used to study alimentary effects. Firstly, we studied the effects of food availability on toxicities induced by exposure to SPIONs after 24 h (acute exposure) or 72 h (prolonged exposure). We found that food provided some protection to C. elegans determined by measuring multiple toxicity endpoints such as survival and reproduction. Worms in the acute exposure condition had a higher uptake efficiency of SPIONS facilitated by food compared with the condition without the addition of food. The utilization of synchrotron Fourier transform infrared microspectroscopy (SR-μFTIR), allowed us to demonstrate that long-exposure (24 h versus 4 h) and high concentrations of SPIONs (500 μg/mL versus 100 μg/mL) induce more severe oxidative stress determined by increased levels of lipid oxidation. Secondly, we investigated food’s influences on worms after 24 h exposure to 10 nm AuNPs. The protective role of food was identified in reducing toxic effects, such as survival and reproduction. Using SR-μFTIR, we found that small-sized AuNPs (10 nm versus 150 nm) or long-exposure (24 h versus 4 h) caused an increased level of lipid oxidation which was related to responses against oxidative stress. On the other hand, we preliminarily evaluated the possibility of performing the photothermal therapy in worms containing 150 nm AuNPs. We found photoablated damages on the laser irradiation spots of worms, suggesting that multiple experimental settings needed to be optimized. At the end of the thesis, also we presented some collaborations where we performed some experiments with different nanomaterials such as lutein and (metal-organic frameworks) MOFs and evaluated them on C. elegans. We studied antioxidative properties of lutein in C. elegans disease models associated with Leigh Syndrome and demonstrated the possibility to apply synchrotron Fourier transform infrared microspectroscopy (SR-μFTIR) on this topic. On the other hand, we performed the preliminary toxicity assessment of MOFs, MIL-127 and chitosan (CS) coated MIL-127 (CS-MIL-127). Additionally, we investigated about effects of the chitosan (CS) coating on C. elegans’ uptake and excretion efficiencies of MIL-127 and CS-MIL-127. We reported the potential of applying C. elegans as an oral administration model of studying metal-organic frameworks’ (MOFs’) in vivo toxicities. In summary, food availability could decrease adverse effects, partially associated with oxidative stress, induce by SPIONs or AuNPs on C. elegans. It also suggested that C. elegans has a great potential of being employed as an oral administration model of testing various materials. Furthermore, combined with other advanced techniques, we could have a more general understanding of the toxicity mechanism and broaden the application range of material science techniques for biological research., Finally, I acknowledge the funding from the Chinese Scholarship Council for pursuing my PhD degree., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Rapid Thermal Annealing of Double Perovskite Thin Films Formed by Polymer Assisted Deposition

  • Wang, Hailin
  • Frontera, Carlos
  • Martínez Perea, Benjamín
  • Mestres, Narcís
The annealing process is an important step common to epitaxial films prepared by chemical solution deposition methods. It is so because the final microstructure of the films can be severely affected by the precise features of the thermal processing. In this work we analyze the structural and magnetic properties of double perovskite La2CoMnO6 and La2NiMnO6 epitaxial thin films prepared by polymer-assisted deposition (PAD) and crystallized by rapid thermal annealing (RTA). It is found that samples prepared by RTA have similar values of saturation magnetization and Curie temperature to their counterparts prepared by using conventional thermal annealing (CTA) processes, thus indicating low influence of the heating rates on the B-B’ site cationic ordering of the A2BB’O6 double perovskite structure. However, a deeper analysis of the magnetic behavior suggested some differences in the actual microstructure of the films., This research was founded by the Spanish Ministry of Science, Innovation and Universities through Severo Ochoa (SEV-2015–04969) and Severo Ochoa FUNFUTURE (CEX2019-000917-S), SUMATE (RTI2018-095853-B-C21), and SPIN-CURIOX (RTI2018-099960- B-100) projects co-financed by the European Regional Development Fund. Hailin Wang acknowledges financial support from the China Scholarship Council (CSC). This work has been performed in the framework of the Ph.D. program in Materials Science of the Universitat Autònoma de Barcelona (UAB), through the CSC/UAB Joint Scholarship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Momentum-dependent electron-phonon coupling in charge density wave systems

  • Pouget, Jean-Paul
  • Canadell, Enric
  • Guster, Bogdan
Many charge density wave (CDW) systems exhibit q(T ) electron-hole modulations continuously varying with T and saturating upon cooling at an incommensurate value even if the maximum occurring in the electron-hole Lindhard response does not exhibit such a thermal shift. Using a simple RPA argument we show that the experimental q(T ) can be understood if the electron-phonon coupling (EPC) g(q), necessary to set coupled electronic and structural modulations, is momentum dependent. In this analysis, the sense of variation of q(T ) depends upon the sign of ∂g(q) ∂q and its amplitude of thermal variation is controlled by the electron-hole coherence length (or CDW rigidity) in the modulation direction. This model quantitatively accounts for the thermal dependence of q(T ) in the one-dimensional (1D) CDW system K0.3MoO3 (blue bronze) both in its CDW ground state and in its pretransitional CDW fluctuation regime. We suggest that such a general analysis can be extended to account for the q(T ) dependence observed in other 1D and 2D CDW systems such as the transition metal di- and trichalcogenides as well as the lanthanide and rare-earth tritellurides. Using a detailed analysis of the low frequency phonon spectrum of the blue bronze, we then propose a new scenario for the q dependent EPC, where g(q) is due to a momentum-dependent hybridization between the critical phonon branch bearing the Kohn anomaly and other low-lying phonon branches. This allows obtaining a sign of ∂g(q) ∂q in agreement with that deduced from the analysis of q(T ). Finally, we propose that similar hybridization effects could also be relevant for other 1D and 2D CDW systems exhibiting a thermally dependent modulation., This work was supported by Spanish MICIU through Grant No. PGC2018-096955-B-C44 and the Severo Ochoa FUNFUTURE (CEX2019-000917-S) Excellence Centre distinction, and Generalitat de Catalunya (Grant No. 2017SGR1506)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Reversal of the Direction of Rectification Induced by Fermi Level Pinning at Molecule–Electrode Interfaces in Redox-Active Tunneling Junctions

  • Han, Yingmei
  • Maglione, Maria Serena
  • Díez Cabanes, Valentín
  • Casado Montenegro, Javier
  • Yu, Xiaojiang
  • Karuppannan, Senthil Kumar
  • Zhang, Ziyu
  • Crivillers, Núria
  • Mas Torrent, Marta
  • Rovira, Concepció
  • Cornil, Jérôme
  • Veciana, Jaume
  • Nijhuis, Christian A.
Control over the energy level alignment in molecular junctions is notoriously difficult, making it challenging to control basic electronic functions such as the direction of rectification. Therefore, alternative approaches to control electronic functions in molecular junctions are needed. This paper describes switching of the direction of rectification by changing the bottom electrode material M = Ag, Au, or Pt in M–S(CH2)11S–BTTF//EGaIn junctions based on self-assembled monolayers incorporating benzotetrathiafulvalene (BTTF) with EGaIn (eutectic alloy of Ga and In) as the top electrode. The stability of the junctions is determined by the choice of the bottom electrode, which, in turn, determines the maximum applied bias window, and the mechanism of rectification is dominated by the energy levels centered on the BTTF units. The energy level alignments of the three junctions are similar because of Fermi level pinning induced by charge transfer at the metal–thiolate interface and by a varying degree of additional charge transfer between BTTF and the metal. Density functional theory calculations show that the amount of electron transfer from M to the lowest unoccupied molecular orbital (LUMO) of BTTF follows the order Ag > Au > Pt. Junctions with Ag electrodes are the least stable and can only withstand an applied bias of ±1.0 V. As a result, no molecular orbitals can fall in the applied bias window, and the junctions do not rectify. The junction stability increases for M = Au, and the highest occupied molecular orbital (HOMO) dominates charge transport at a positive bias resulting in a positive rectification ratio of 83 at ±1.5 V. The junctions are very stable for M = Pt, but now the LUMO dominates charge transport at a negative bias resulting in a negative rectification ratio of 912 at ±2.5 V. Thus, the limitations of Fermi level pinning can be bypassed by a judicious choice of the bottom electrode material, making it possible to access selectively HOMO- or LUMO-based charge transport and, as shown here, associated reversal of rectification., The authors express thanks to the Ministry of Education (MOE) for supporting this research under award nos. MOE2018-T2-1-088 and R-143-000-B30-112. We also acknowledge the Prime Minister’s Office, Singapore, under its Medium Sized Centre program for supporting this research. This work was also funded by ITN iSwitch 642196, the DGI (Spain), projects FANCY (CTQ2016-80030-RA), GENESIS (PID2019-111682RB-I00) and MOTHER (MAT2016-80826- R), the Generalitat de Catalunya (2017-SGR-918), the Instituto de Salud Carlos III, through “Acciones CIBER”, and the Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” program for Centers of Excellence in R&D (FUNFUTURE; CEX2019-000917-S). The work in Mons was financially supported by the EC through the Marie Curie project ITN iSwitch (GA no. 642196). Computational resources were provided by the Consortium des É quipements de Calcul Intensif (CÉ CI) funded by the Belgian National Fund for Scientific Research (F.R.S.-FNRS) under grant 2.5020.11. J.C. is an FNRS research director., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Mitochondria-targeted magnetic gold nanoheterostructure for multi-modal imaging guided photothermal and photodynamic therapy of triple-negative breast cancer

  • Li, Bo
  • Zhou, Qian
  • Wang, Haiyang
  • Zha, Yongchao
  • Zheng, Peilian
  • Yang, Tong
  • Ma, Dong
  • Qiu, Lin
  • Xu, Ximing
  • Hu, Ye
  • Roig Serra, Anna
  • Yu, Siming
  • Xue, Wei
Triple-negative breast cancer (TNBC) is a type of highly aggressive cancer that is hard to be cured by the commonly used chemotherapy, mainly due to the lack of effective tumor targeting ability of the current drugs and TNBC drug resistance. Therefore, development of novel strategies for precise and high-efficient therapy of TNBCs is urgently needed. In the present work, a multifunctional magnetic gold nanoheterostructure with photosensitizer Ce6 loading (MGN@Ce6) was designed and synthesized for synergistic photothermal and photodynamic therapy (PTT/PDT) of TNBC. To improve the tumor targeting ability, cRGD and TPP cationic molecule, which can specifically target αvβ3 integrin of cancer cell membrane and mitochondria, respectively, were functionalized on the nanosystem obtaining MGN@Ce6@RT. In vitro and in vivo fluorescent imaging demonstrated that cRGD and TPP functionalization largely enhanced the delivery-efficiency of MGN@Ce6@RT into TNBC cells and tumors. Under 880 nm and 660 nm laser irradiations, MGN@Ce6@RT exhibited strong hyperthermia effect and ROS generating ability, which exerted a synergistic anti-TNBC effect by completely suppressed the tumor growth of the nude mice model. Moreover, by integrating superparamagnetic and near infrared light absorption properties into a single nanocomposite, MGN@Ce6@RT was proved to be able to realize magnetic resonance, X-ray computed tomography and photoacoustic tri-modal imaging of in vivo tumors. In all, we provide a novel strategy for precise delivery of functional nanosystems to TNBC tumors to achieve more satisfying treating outcome., B. Li performed experiment, collected and interpreted the data, and wrote the draft version of the manuscript. Q. Zhou carried out the rat experiment, histology and cytotoxicity analysis. H.Y. Wang did some of the in vivo multimodal imaging parts. Y.C. Zha did some of the characterizations. P.L. Zheng helped some in vitro cell experiments. Y. Hu synthesized MGN@Ce6@RT. L. Qiu helped the in vivo CT imaging performance and imaging data analysis. T. Yang participated in flow experiments. X.M. Xu designed the graphical abstract and scheme picture. A. Roig helped in the analysis of the MRI data and editing the manuscript. D. Ma, S.M. Yu and W. Xue provided the funding. W. Xue discussed the results and corrected the manuscript. S.M. Yu designed the work, collected the data, discussed the results and corrected the manuscript. We also thank Prof. Peng Huang of Shenzhen University (Guangdong, China) for providing the photoacoustic imaging test service. This work was supported by the China Postdoctoral Science Foundation (2019 M653286), the National Natural Science Foundation of China (31870943, 31900953), the Science and Technology Project of Guangdong Province (2018A050506019), the Natural Science Foundation of Guangdong Province (2018A030313462, 2017A030310297), Guangzhou basic and applied basic research project (202002030002), the Pearl River talent program of Guangdong Province (Youth top-notch talent, 2017GC010330) and the Guangdong Provincial Key Laboratory of Construction and Detection in Tissue Engineering., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Laser fabrication of hybrid electrodes composed of nanocarbons mixed with cerium and manganese oxides for supercapacitive energy storage

  • García Lebière, Pablo
  • Pérez del Pino, Ángel
  • Domènech Domingo, Guillem
  • Logofatu, Constantin
  • Martínez Rovira, Immaculada
  • Yousef, Ibraheem
  • Gyorgy, Eniko
Novel composite materials are being investigated for improving the energy storage performance of electrochemical capacitors. For this goal, synergistic effects via the combination of diverse types of materials are crucial. In this work, electrodes composed of reduced graphene oxide, multiwall carbon nanotubes, as well as cerium and manganese oxides were fabricated through reactive inverse matrix-assisted pulsed laser evaporation (RIMAPLE). UV-pulsed laser irradiation of frozen aqueous dispersions containing graphene oxide sheets, carbon nanotubes, and ceria nanoentities, besides manganese acetate precursor, led to the simultaneous chemical transformation and co-deposition of hybrid electrodes onto flexible metallic substrates via photothermal and photochemical processes. Thorough morphological and compositional studies of the electrodes demonstrated the laser-induced reduction of graphene oxide, besides the crystallization of a mixture of cerium and manganese oxide nanostructures decorating the carbon nanoentities during the deposition process. Electrochemical analyses revealed a remarkable improvement of performance with the combination of electrochemical double layer in the porous nanocarbon framework with pseudocapacitance from the oxide nanostructures, obtaining excellent volumetric capacitances of up to 140 F cm−3 at 10 mV s−1 with the combination of all four materials. The attained results are the best ones yet published regarding RIMAPLE of hybrid nanocarbon-based electrodes with micrometric thickness. Finally, symmetric electrochemical capacitors were fabricated using aqueous electrolyte, revealing excellent stability upon tens of thousands of charge–discharge cycles., The authors thank the financial support of the Spanish Ministry of Economy, Industry and Competitiveness under the project ENE2017-89210-C2-1-R and support from AGAUR of Generalitat de Catalunya through projects 2017 SGR 1086 and 2017 SGR 1771. PGL thanks the financial support of the Spanish Ministry of Economy, Industry and Competitiveness through the grant BES-2017-081652 for the formation of scientific researchers. ICMAB acknowledges financial support from the Spanish Ministry of Economy and Competitiveness, through Severo Ochoa FUNFUTURE (CEX2019-000917-S). The FTIRM experiments were performed at MIRAS beamline at ALBA Synchrotron with the collaboration of ALBA staff. We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Mobile and immobile boundaries in ferroelectric flms

  • Yudin, P.
  • Shapovalov, Konstantin
  • Sluka, T.
  • Peräntie, J.
  • Jantunen, H.
  • Dejneka, A.
  • Tyunina, M.
The intrinsic mobile interfaces in ferroelectrics—the domain walls can drive and enhance diverse ferroelectric properties, essential for modern applications. Control over the motion of domain walls is of high practical importance. Here we analyse theoretically and show experimentally epitaxial ferroelectric films, where mobile domain walls coexist and interact with immobile growth-induced interfaces—columnar boundaries. Whereas these boundaries do not disturb the long-range crystal order, they affect the behaviour of domain walls in a peculiar selective manner. The columnar boundaries substantially modify the behaviour of non-ferroelastic domains walls, but have negligible impact on the ferroelastic ones. The results suggest that introduction of immobile boundaries into ferroelectric films is a viable method to modify domain structures and dynamic responses at nano-scale that may serve to functionalization of a broader range of ferroelectric films where columnar boundaries naturally appear as a result of the 3D growth., The authors are grateful to Prof. A. Gruverman for useful discussions. Marijke Spanjer is acknowledged for proofreading the manuscript. PY acknowledges the Russian Foundation for Basic Research, Grant No. 19-02-00938. The study of the interaction of ferroelastic DWs with CBs was carried out under a state contract with IT SB RAS. KS acknowledges the support by the French Government "Investments for the Future" Program, University of Bordeaux Initiative of Excellence (IDEX Bordeaux), and by the Generalitat de Catalunya (Grant No. 2017SGR 1506). PY, AD and MT acknowledge the Operational Program Research, Development and Education, financed by the European Structural and Investment Funds and the Czech Ministry of Education, Youth, and Sports (Project No. SOLID21, CZ.02.1.01/0.0/0.0/16_019/0000760). MT acknowledges support from the Czech Science Foundation (Grant No. 19-09671S). JP acknowledges the funding from the Academy of Finland (Grant No. 298409)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Limbal Stem Cells on Bacterial Nanocellulose Carriers for Ocular Surface Regeneration

  • Anton Sales, Irene
  • Koivusalo, Laura
  • Skottman, Heli
  • Laromaine, Anna
  • Roig Serra, Anna
Limbal stem cells (LSCs) are already used in cell‐based treatments for ocular surface disorders. Clinical translation of LSCs‐based therapies critically depends on the successful delivery, survival, and retention of these therapeutic cells to the desired region. Such a major bottleneck could be overcome by using an appropriate carrier to provide anchoring sites and structural support to LSC culture and transplantation. Bacterial nanocellulose (BNC) is an appealing, yet unexplored, candidate for this application because of its biocompatibility, animal‐free origin and mechanical stability. Here, BNC as a vehicle for human embryonic stem cells‐derived LSC (hESC‐LSC) are investigated. To enhance cell‐biomaterial interactions, a plasma activation followed by a Collagen IV and Laminin coating of the BNC substrates is implemented. This surface functionalization with human extracellular matrix proteins greatly improved the attachment and survival of hESC‐LSC without compromising the flexible, robust and semi‐transparent nature of the BNC. The surface characteristics of the BNC substrates are described and a preliminary ex vivo test in simulated transplantation scenarios is provided. Importantly, it is shown that hESC‐LSC retain their self‐renewal and stemness characteristics up to 21 days on BNC substrates. These results open the door for future research on hESC‐LSC/BNC constructs to treat severe ocular surface pathologies., This collaborative project was mainly funded with an european molecular biology organization short‐term fellowship (ref 8288) awarded to I.A.‐S. and the authors would like to express their gratitude to this institution. Researchers acknowledge financial support from the Spanish Ministry of Science and Innovation through the RTI2018‐096273‐B‐I00 project, the Severo Ochoa Programme for Centres of Excellence in R&D (SEV‐2015‐0496 and CEX2019‐000917‐S) and the Ph.D. scholarship of I.A.‐S. (BE‐2017‐076734) as well as Academy of Finland (326760). The authors are also grateful to Generalitat de Catalunya for the 2017SGR765 and the 2019LLAV00046 projects. Authors also appreciate Miquel Anton for his assistance with photography, the AFM service of ICMAB, the electron microscopy facility of ICN2, and the optical microscope service of UAB. The ICMAB members (I.A.‐S., A.L., and A.R.) participate in the CSIC Interdisciplinary Platform for Sustainable Plastics toward a Circular Economy, SUSPLAST, MICINN: “Research Networks” nanoCARE, (RED2018‐102469‐T) and in the Aerogels COST ACTION (CA 18125). This work was conducted within the Material Science Doctoral Program of the Autonomous University of Barcelona (I.A.‐S.). The authors deeply thank the laboratory staff of Tampere University, especially Outi Melin and Hanna Pekkanen for the production, maintenance and differentiation of the hESCs and hESC‐LSC, and Juha Heikkilä for the help with the plasma equipment. The authors acknowledge the Biocenter Finland (BF) and Tampere Imaging Facility (TIF) for their service., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Combinatorial Screening of Cuprate Superconductors by Drop-On-Demand Inkjet Printing

  • Queraltó, Albert
  • Banchewski, Juri
  • Pacheco, Adrià
  • Gupta, Kapil
  • Saltarelli, Lavinia
  • García Franco, Diana
  • Alcalde, Núria
  • Cristian Mocuta,
  • Ricart, Susagna
  • Pino, Flavio
  • Obradors, Xavier
  • Puig Molina, Teresa
Combinatorial and high-throughput experimentation (HTE) is achieving more relevance in material design, representing a turning point in the process of accelerated discovery, development, and optimization of materials based on data-driven approaches. The versatility of drop-on-demand inkjet printing (IJP) allows performing combinatorial studies through fabrication of compositionally graded materials with high spatial precision, here by mixing superconducting REBCO precursor solutions with different rare earth (RE) elements. The homogeneity of combinatorial Y1−xGdxBa2Cu3O7 samples was designed with computational methods and confirmed by energy-dispersive Xray spectroscopy (EDX) and high-resolution X-ray diffraction (XRD). We reveal the advantages of this strategy in the optimization of the epitaxial growth of high-temperature REBCO superconducting films using the novel transient liquid-assisted growth method (TLAG). Advanced characterization methods, such as in situ synchrotron growth experiments, are tailored to suit the combinatorial approach and demonstrated to be essential for HTE schemes. The experimental strategy presented is key for the attainment of large datasets for the implementation of machine learning backed material design frameworks., The authors acknowledge the European Research Council for the ULTRASUPERTAPE project (ERC-2014-ADG-669504) and EU COST action for CA16218 (NANOCOHYBRI). We also acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, and Spanish Ministry of Science, Innovation and Universities through the “Severo Ochoa” Program for Centers of Excellence in R&D (SEV-2015-0496 and CEX2019-000917-S), SUMATE project (RTI2018-095853-B-C21, co-financed by the European Regional Development Fund). Synchrotron SOLEIL is acknowledged for granting the beamtime (under project no. 20190274) and P. Joly for setup assistance at the DiffAbs beamline. We also acknowledge support from the Catalan Government with 2017-SGR-1519 and the energy Catalan network E4S. A.Q. thanks the Spanish Ministry of Science, Innovation and Universities for his “Juan de la Cierva” postdoctoral fellowship (Grant no. IJC2018-035034-I). We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Epitaxial Ferroelectric HfO2 Films: Growth, Properties, and Devices

  • Fina, Ignasi
  • Sánchez Barrera, Florencio
About ten years after ferroelectricity was first reported in doped HfO2 polycrystalline films, there is tremendous interest in this material and ferroelectric oxides are once again in the spotlight of the memories industry. Great efforts are being made to understand and control ferroelectric properties. Epitaxial films, which have fewer defects and a more controlled microstructure than polycrystalline films, can be very useful for this purpose. Epitaxial films of ferroelectric HfO2 have been much less investigated, but after the first report in 2015 significant progress has been achieved. This review summarizes and discusses the main advances on epitaxial HfO2, considering growth, study of structural and ferroelectric properties, identification of the ferroelectric phase, and fabrication of devices. We hope this review will help to researchers investigating epitaxial HfO2. It can also help extend the interest of the ferroelectric HfO2 community, now basically focused on polycrystalline samples, to epitaxial films., Financial support from the Spanish Ministry of Science and Innovation, through the Severo Ochoa FUNFUTURE (CEX2019-000917-S), MAT2017-85232-R (AEI/FEDER, EU), PID2020-112548RB-I00 (AEI/FEDER, EU), and PID2019-107727RB-I00 (AEI/FEDER, EU) projects, from CSIC through the i-LINK (LINKA20338) program, and from Generalitat de Catalunya (2017 SGR 1377) is acknowledged. Project support was also provided by a 2020 Leonardo Grant for Researchers and Cultural Creators, BBVA Foundation. I.F. acknowledges Ramón y Cajal Contract RYC-2017-22531., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Self-discharge in Li-ion aqueous batteries: A case study on LiMn2O4

  • Trócoli, Rafael
  • Morata, Alex
  • Erinmwingbovo, Collins
  • La Mantia, Fabio
  • Tarancon, Albert
Aqueous rechargeable lithium-ion batteries have attracted great attention as an alternative to traditional battery technologies, being able to overcome the issues caused by flammable and expensive organic electrolytes. In particular, LiMn2O4 has reached very fast second-level charge capability by the synthesis of unconventional morphology and particle sizes, allowing charging rates up to 600 C and 93% retention of the capacity after 10,000 cycles. However, the self-discharge process and aging mechanisms for aqueous batteries have been rarely studied, which contrasts with the extensive bibliography of the same phenomena in LMO cells based on organic electrolytes. In this article, the mechanisms involved in the loss of reversible specific charges were studied by diverse techniques like OCV, EIS, and In-situ Raman. The results revealed a more favorable self-discharge process compared with using organic electrolytes owing to the lower stability of water. The self-discharge process can be divided into three different regions with a sequential lower decay rate of voltage and capacity as well as two different evolutions of the electric parameters. This study opens new questions about the nature, composition, and mechanisms of the self-discharge in aqueous media which will play a critical role in the electrochemical performance of novel aqueous Li-ion batteries., This work has been funded by the FP7-NMP-2013-SMALL-7, SiNERGY (Contract 604169), CERCA Programme/Generalitat de Catalunya. A.S., MSCA grant agreement No. 658057 and European Research Council (ERC, grant agreement number 772579). We greatly thank these entities for their economical support as well as the support of the Severo Ochoa FUNFUTURE (CEX2019-000917-S) Exellence Centre distinction., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Heavy-mineral provenance signatures during the infill and uplift of a foreland basin: An example from the Jaca basin (southern Pyrenees, Spain)

  • Coll, Xavier
  • Gómez-Gras, David
  • Roigé, Marta
  • Teixell, Antonio
  • Boya, Salva
  • Mestres, Narcís
In the Jaca foreland basin (southern Pyrenees), two main sediment routing systems merge from the late Eocene to the early Miocene, providing an excellent example of interaction of different source areas with distinct petrographic signatures. An axially drained fluvial system, with its source area located in the eastern Central Pyrenees, is progressively replaced by a transverse-drained system that leads to the recycling of the older turbiditic foredeep. Aiming to provide new insights into the source-area evolution of the Jaca foreland basin, we provide new data on heavy-mineral suites, from the turbiditic underfilled stage to the youngest alluvial-fan systems of the Jaca basin, and integrate the heavy-mineral signatures with available sandstone petrography. Our results show a dominance of the ultrastable Ap-Zrn-Tur-Rt assemblage through the entire basin evolution. However, a late alluvial sedimentation stage brings an increase in other more unstable heavy minerals, pointing to specific source areas belonging to the Axial and the North Pyrenean Zone and providing new insights into the response of the heavy-mineral suites to sediment recycling. Furthermore, we assess the degree of diagenetic overprint vs. provenance signals and infer that the loss of unstable heavy minerals due intrastratal dissolution is negligible at least in the Peña Oroel and San Juan de la Peña sections. Finally, we provide new evidence to the idea that during the late Eocene the water divide of the transverse drainage system was located in the North Pyrenean Zone, and areas constituted by the Paleozoic basement were exposed in the west-Central Pyrenees at that time. Our findings provide new insights into the heavy-mineral response in recycled foreland basins adjacent to fold-and-thrust belts., This paper is a contribution to the projects CGL2014-54180-P and PGC2018-093903-B-C21, financed by the Ministerio de Economia y Competitividad (MINECO) and Ministerio de Ciencia, Inovación y Universidades (MCIU) of Spain. X. Coll acknowledges support from the Ministerio de Cultura, Deporte y Educacción (MCDE) of Spain (FPU grant). We are very grateful to the reviewers Eric Lasseur and Sergio Andò, and to the editor John Southard, for providing constructive reviews that helped to improve the original paper., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enhancement of phase stability and optoelectronic performance of BiFeO3 thin films via cation co-substitution

  • Machado, Pamela
  • Caño, Iván
  • Menéndez, César
  • Cazorla, Claudio
  • Tan, Huan
  • Fina, Ignasi
  • Campoy Quiles, Mariano
  • Escudero, Carlos
  • Tallarida, Massimo
  • Coll, Mariona
Compositional engineering of BiFeO3 can significantly boost its photovoltaic performance. Therefore, controlling site substitution and understanding how it affects the optical and electronic properties while achieving robust and stable phases is essential to continue progressing in this field. Here the influence of cation co-substitution in BiFeO3 on phase purity, optical and electronic properties is investigated by means of X-ray diffraction, spectroscopic ellipsometry and X-ray absorption spectroscopy, respectively. Piezoelectric force microscopy and ferroelectric characterization at room temperature has been carried out in co-doped BiFeO3 films. First-principles calculations are also performed and compared to the experimental observations. It is shown that the incorporation of La3+ in Bi(Fe,Co)O3 films improves phase purity and stability while preserving the reduced band gap achieved in metastable Bi(Fe,Co)O3. Moreover, it is suggested that the changes in the optoelectronic properties are mainly dictated by the hybridisation between unoccupied Co 3d and O 2p states along with the presence of Co3+/Co2+ species. This thorough study on (Bi,La)(Fe,Co)O3 thin films coupled with the use of a cost-effective and facile solution deposition synthesis increases the motivation to continue exploiting the potential of these perovskite materials., This research was supported by the Spanish Ministerio de Ciencia, Innovación y Universidades (“Severo Ochoa” Programme for Centres of Excellence in R&D CEX2019-000917-S, MAT2017-83169-R, RTI2018-093996-B-C32, PID2019-107727RB-I00 (AEI/FEDER, EU)). P. M. thanks financial support from FPI fellowship (PRE2018-084618). C. M. and C. C. acknowledge computational resources and technical assistance from the Australian Government and the Government of Western Australia through the National Computational Infrastructure (NCI) and Magnus under the National Computational Merit Allocation Scheme and The Pawsey Supercomputing Centre. The authors acknowledge Prof. J. Fontcuberta for providing access to his experimental facilities and the support of ALBA staff for the successful performance of the measurements at CIRCE beamline of the ALBA Synchrotron Light Source. I. F. and C. C. acknowledge support from the Spanish Ministry of Science, Innovation and Universities under the “Ramón y Cajal” fellowship RYC2017-226531 and RYC2018-024947-I, respectively. M. C and I. F acknowledge Beca Leonardo from fundación BBVA. H. T is financially supported by China Scholarship Council (CSC) with no. 201906050014. The work of P. M. and H. T have been done in the framework of the doctorate in Materials Science of the Autonomous University of Barcelona., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Facile Chemical Route to Prepare Water Soluble Epitaxial Sr3Al2O6 Sacrificial Layers for Free‐Standing Oxides

  • Sallés, Pol
  • Caño, Iván
  • Guzmán, Roger
  • Dore, Camilla
  • Mihi, Agustín
  • Zhou, Wu
  • Coll, Mariona
The growth of epitaxial complex oxides has been essentially limited to specific substrates that can induce epitaxial growth and stand high temperature thermal treatments. These restrictions hinder the opportunity to manipulate and integrate such materials into new artificial heterostructures including the use of polymeric and silicon substrates and study emergent phenomena for novel applications. To tackle this bottleneck, herein, a facile chemical route to prepare water‐soluble epitaxial Sr3Al2O6 thin films to be used as sacrificial layer for future free‐standing epitaxial complex oxide manipulation is described. Two solution processes are put forward based on metal nitrate and metalorganic precursors to prepare dense, homogeneous and epitaxial Sr3Al2O6 thin films that can be easily etched by milli‐Q water. Moreover, as a proof of concept, a basic heterostructure consisting of Al2O3/Sr3Al2O6 on SrTiO3 is fabricated to subsequently exfoliate the Al2O3 thin film and transfer it to a polymer substrate. This is a robust chemical and low‐cost methodology that could be adopted to prepare a wide variety of thin films to fabricate artificial heterostructures to go beyond the traditional electronic, spintronic, and energy storage and conversion devices., This research was supported by the Spanish Ministerio de Ciencia, Innovación y Universidades (“Severo Ochoa” Programme for Centres of Excellence in R&D FUNFUTURE CEX2019‐000917‐S and MAT2017‐83169‐R(AEI/FEDER, EU)). The project that gave rise to these results received the support of a fellowship from “la Caixa” Foundation LCF/BQ/DI19/11730026. M.C. acknowledges Becas Leonardo fundación BBVA. I.C. acknowledges the JAE Intro fellowship, JAEINT1901918. This work was done in the framework of the doctorate in material science of the Autonomous University of Barcelona. This work received financial support from the National Key R&D Program of China (2018YFA0305800), and the Beijing Outstanding Young Scientist Program (BJJWZYJH01201914430039)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Fabrication of GdxFeyOz films using an atomic layer deposition-type approach

  • Yu, Penmgei
  • Beer, Sebastian M. J.
  • Devi, Anjana
  • Coll, Mariona
The growth of complex oxide thin films with atomic precision offers bright prospects to study improved properties and novel functionalities. Here we tackle the fabrication of gadolinium iron oxide thin films by an atomic layer deposition-type approach in which iron and gadolinium tailor-made metalorganic precursors (bis(N-isopropyl ketoiminate)iron(II), [Fe(ipki)2] and tris(N,N′-diisopropyl-2-dimethylamido-guanidinato)gadolinium(III), [Gd(DPDMG)3]) are alternately reacted with ozone and deposited on silicon substrates at 250 °C. The structure, chemical composition and magnetic properties of the resulting films are compared with those obtained from a commercially available ferrocene precursor [Fe(Cp)2] and [Gd(DPDMG)3]. All films resulted in cation ratio close to nominal stoichiometry with negligible amount of organic species. The tailor-made metalorganic precursors, designed to provide similar thermal behavior, result in the formation of polycrystalline Gd3Fe5O12 films coexisting with GdFeO3, Gd2O3 and Fe2O3 whereas the combination of [Fe(Cp)2] and [Gd(DPDMG)3] mainly favors the formation of Gd3Fe5O12 films coexisting with traces of Gd2O3. This study demonstrates that this is a viable route to prepare complex GdxFeyOz films and could be used for the design of complex oxide films with improved properties upon rigorous study of the compatibility of metalorganic precursors., This work has been supported through the “Severo Ochoa” Programme for Centres of Excellence in R & D (CEX2019-000917-S), and MAT2017-83169-R from the Spanish Ministry of Economy and Competitiveness. This article is based upon work from COST Action MP1402 “Hooking together European research in atomic layer deposition (HERALD)”, supported by COST (European Cooperation in Science and Technology). The authors gratefully thank the Scientific Services at ICMAB and G. Sauthier from ICN2 core support facilities for XPS analysis. This work has been done in the framework of the doctorate in Materials Science of the Autonomous University of Barcelona. We also acknowledge financial support from China Scholarship Council fellowship to P. Yu (201606920073). The authors from RUB thank the DFG-DE-790-11-1 project for partly supporting this project. M. C. acknowledges Beca Leonardo from Fundación BBVA., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Blended Positive Electrodes for Li‐Ion Batteries: From Empiricism to Rational Design

  • Casas Cabanas, Montse
  • Ponrouch, Alexandre
  • Palacín, M. Rosa
Physical mixtures (i. e. blends) of two or more active materials are often used in commercial batteries to achieve better performance than what can be attained with a single component. This approach has been empirically driven and found to result in relevant synergistic improvements that are unfortunately poorly understood at a fundamental level. Indeed, internal redox processes (which induce structural changes in the components) can take place in blended electrodes that are severely influenced by electrode kinetics. These are in turn affected by temperature and also electrode formulation. Despite difficulties ahead, efforts to understand such issues are needed to pave the way for a rational electrode design enabling optimized performance which ideally could be tuned to match specific application requirements., Authors are grateful to ALISTORE‐ERI colleagues for helpful discussions. ICMAB‐CSIC members thank the Spanish Ministry for Economy, Industry and Competitiveness Severo Ochoa Programme for Centres of Excellence in R&D (CEX2019‐000917‐S) and funding through grant MAT2017‐86616‐R. MCC is also grateful to Spanish Ministry for Economy, Industry and Competitiveness for funding through grant PID2019‐107106RB‐C33., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Non-volatile optical switch of resistance in photoferroelectric tunnel junctions

  • Long, Xiao
  • Tan, Huan
  • Sánchez Barrera, Florencio
  • Fina, Ignasi
  • Fontcuberta, Josep
In the quest for energy efficient and fast memory elements, optically controlled ferroelectric memories are promising candidates. Here, we show that, by taking advantage of the imprint electric field existing in the nanometric BaTiO3 films and their photovoltaic response at visible light, the polarization of suitably written domains can be reversed under illumination. We exploit this effect to trigger and measure the associate change of resistance in tunnel devices. We show that engineering the device structure by inserting an auxiliary dielectric layer, the electroresistance increases by a factor near 2 × 103%, and a robust electric and optic cycling of the device can be obtained mimicking the operation of a memory device under dual control of light and electric fields., Financial support from the Spanish Ministry of Science, Innovation and Universities, through the “Severo Ochoa” Program for Centres of Excellence in R&D (FUNFUTURE, CEX2019-000917-S) and the MAT2017-85232-R (AEI/FEDER, EU), MAT2015-73839-JIN (MINECO/FEDER, EU), PID2019-107727RB-I00 (MINECO/FEDER, EU) projects, and from Generalitat de Catalunya (2017 SGR 1377) is acknowledged. I.F. acknowledges RyC Contract RYC-2017-22531 and Beca Leonardo from Fundación BBVA. X.L and H.T are financially supported by China Scholarship Council (CSC), respectively with nos. 201806100207 and 201906050014. The work of X.L. and H.T. have been done as a part of their Ph.D. program in Materials Science at Universitat Autònoma de Barcelona. We are extremely thankful to R. Solanas for his skillful operation of the PLD system. R. Silvestre-Anglada is acknowledged for assistance in I(V) characteristics fittings., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Soft‐Chemistry‐Assisted On‐Chip Integration of Nanostructured α‐Quartz Microelectromechanical System

  • Jolly, Claire
  • Gómez Rodríguez, Andrés
  • Sánchez Fuentes, David
  • Cakiroglu, Dilek
  • Rathar, Raïssa
  • Maurin, Nicolas
  • Garcia Bermejo, Ricardo
  • Charlot, Benoit
  • Gich, Martí
  • Bahriz, Michael
  • Picas, Laura
  • Carretero Genevrier, Adrian
The development of advanced piezoelectric α‐quartz microelectromechanical system (MEMS) for sensing and precise frequency control applications requires the nanostructuration and on‐chip integration of this material on silicon material. However, the current quartz manufacturing methods are based on bonding bulk micromachined crystals on silicon, which limits the size, the performance, the integration cost, and the scalability of quartz microdevices. Here, chemical solution deposition, soft‐nanoimprint lithography, and top‐down microfabrication processes are combined to develop the first nanostructured epitaxial (100)α‐quartz/(100)Si piezoelectric cantilevers. The coherent Si/quartz interface and film thinness combined with a controlled nanostructuration on silicon–insulator–silicon technology substrates provide high force and mass sensitivity while preserving the mechanical quality factor of the microelectromechanical systems. This work proves that biocompatible nanostructured epitaxial piezoelectric α‐quartz‐based MEMS on silicon can be engineered at low cost by combining soft‐chemistry and top‐down lithographic techniques., This project had received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (project SENSiSOFT No.803004). L.P. acknowledges the ATIP–Avenir program for financial support. The authors thank C. André for providing the transfected HT1080 cell line and C. Cazevielle (MRI‐COMET, Montpellier) for assistance with biological SEM images. The authors thank D. Montero for performing the FEG–SEM images and chemical analysis. The FEG–SEM instrumentation was facilitated by the Institut des Matériaux de Paris Centre (Grant No. IMPC FR2482) and was funded by Sorbonne Université, CNRS and by the C'Nano projects of the Région Ile‐de‐France. The authors thank Frederic Pichot, David Bourrier, and Guilhem Larrieu for the expertise and advice during the cantilever lithographic processes. The authors also thank Wioletta Trzpil, Frank Augereau, and Eric Rosenkrantz for the advice during vibrometry measurements. A.G and M.G acknowledge funding from the Spanish Ministerio de Ciencia e Innovacion through the severo Ochoa program (CEX2019‐000917‐S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Soft X-ray Transmission Microscopy on Lithium-Rich Layered-Oxide Cathode Materials

  • Sorrentino, Andrea
  • Simonelli, Laura
  • Kazzazi, Arefehsadat
  • Laszczynski, Nina
  • Birrozzi, Agnese
  • Mullaliu, Angelo
  • Pereiro, Eva
  • Passerini, Stefano
  • Giorgetti, Marco
  • Tonti, Dino
Energy-dependent full field transmission soft X-ray microscopy (TXM) is able to give a full picture at the nanometer scale of the chemical state and spatial distribution of oxygen and other elements relevant for battery materials, providing pixel-by-pixel absorption spectrum. We show different methods to localize chemical inhomogeneities in Li1.2Mn0.56Ni0.16Co0.08O2 particles with and without VOx coating extracted from electrodes at different states of charge. Considering the 3d(Mn,Ni)-2p(O) hybridization, it has been possible to discriminate the chemical state of Mn and Ni in addition to the one of O. Different oxidation states correspond to specific features in the O-K spectra. To localize sample regions with specific compositions we apply two different methods. In the first, the pixel-by-pixel ratios of images collected at different key energies clearly highlight local inhomogeneities. In the second, introduced here for the first time, we directly correlate corresponding pixels of the two images on a xy scatter plot that we call phase map, where we can visualize the distributions as function of thickness as well as absorption artifacts. We can select groups of pixels, and then map regions with similar spectral features. Core-shell distributions of composition are clearly shown in these samples. The coating appears in part to frustrate some of the usual chemical evolution. In addition, we could directly observe several further aspects, such as: distribution of conducting carbon; inhomogeneous state of charge within the electrode; molecular oxygen profiles within a particle. The latter suggests a surface loss with respect to the bulk but an accumulation layer at intermediate depth that could be assigned to retained O2., This research was funded by Spanish Government, through the “Severo Ochoa” Programme for Centers of Excellence in R&D (FUNFUTURE CEX2019-000917-S), and the projects MAT2017-91404-EXP, RTI2018-096273-B-I00 and RTI2018-097753-B-I00 with FEDER cofunding. D.T. participates in the FLOWBAT 2021 platforms promoted by the Spanish National Research Council (CSIC). The HIU authors acknowledge the basic funding from the Helmholtz Association., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Low-Fluorine Ba-Deficient Solutions for High-Performance Superconducting YBCO Films

  • Ternero, Pau
  • Alcalà, Jordi
  • Piperno, Laura
  • Pop, Cornelia
  • Ricart, Susagna
  • Mestres, Narcís
  • Obradors, Xavier
  • Puig Molina, Teresa
  • Sotgiu, Giovanni
  • Celentano, Giuseppe
  • Palau, Anna
High-performing superconducting YBa2Cu3O7–x (YBCO) films are fabricated by a chemical solution deposition methodology through novel barium-deficient low-fluorine solutions. The precursor solutions, distinguished for being straightforward, inexpensive and eco-friendly, allow us to reduce the growing temperature of YBCO down to 750 °C. We investigated the influence of the growing temperatures on both the microstructure and superconducting properties of YBCO films by using conventional thermal annealing and flash-heating approaches. A clear correlation between the growing temperature (Tg) and the superconducting performance of the films was obtained with improved performances observed at low Tg., This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom Research and Training Programme 2014–2018 and 2019–2020 under grant agreement No 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission. We acknowledge financial support from Spanish Ministry of Economy and Competitiveness through the Severo Ochoa Programme for Centres of Excellence in R&D (SEV-2015-0496, FUNFUTURE CEX2019-000917-S), SUMATE project RTI2018-095853-B-C21, cofinanced by the European Regional Development Fund, COST-Nanocohybri CA16218 and Catalan Government with 2017-SGR-1519 and XRE4S., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Cutting Edge Technologies by Silicon- and Silicon Oxide-Based Nanostructures

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Structure and phase transitions in A-site ordered RBaMn2O6 (R = Pr, Nd) perovskites with a polar ground state

  • Blasco, Javier
  • Subías, Gloria
  • Sanjuán, M. L.
  • García Muñoz, Josep Lluís
  • Fauth, François
  • García, J.
We report here a structural study of RBaMn2O6 (R = La, Pr, and Nd) compounds by means of synchrotron radiation x-ray powder diffraction and Raman spectroscopy. The three compounds are A-site ordered perovskites adopting the prototypical tetragonal structure at high temperature. A ferromagnetic transition is observed in the LaBaMn2O6 sample and the lattice parameters undergo anisotropic changes at TC related to the orientation of the magnetic moments. Both PrBaMn2O6 and NdBaMn2O6 have a structural transition coupled to an electronic localization and an antiferromagnetic transition. In both cases, the x-ray diffraction patterns reveal that the lowtemperature phase is orthorhombic with lattice parameters a + b, b − a, and c with respect to the tetragonal phase. Two possible solutions belonging to the space groups Pmam and P21am can yield accurate refinements of the x-ray patterns. However, the active modes in the low-temperature phase disclosed by the Raman spectroscopy clearly point to the noncentrosymmetric space group, P21am. The symmetry analysis of this transition unveils that the primary modes belong to the irreducible representations M5− and GM5− and the main distortions correspond to rotations of the MnO6 octahedra and an asymmetric combination of stretching and scissoring modes of the basal oxygens in these octahedra. We conclude that the low-temperature phase is polar and the main contribution comes from the displacement of oxygen atoms from their centrosymmetric positions. However, negligible contribution from the asymmetric stretching associated with a Jahn-Teller distortion is found in this structural transition, suggesting the lack of ferroic orbital ordering of eg (3dx2−y2 ) orbitals in the orthorhombic ab plane. There is only one inequivalent site for the Mn atom in the low-temperature polar phase so charge ordering cannot account for the electronic localization having a structural origin., The authors would like to acknowledge the Servicio General de Apoyo a la Investigación from Universidad de Zaragoza. Granted beam time at ALBA synchrotron is appreciated (Proposal No. 2018093038). For financial support, we thank the Spanish Ministerio de Ciencia, Innovación y Universidades (Projects No. RTI2018-098537-B-C22 and No. RTI2018-098537-B-C21 cofunded by ERDF from EU, and Severo Ochoa FUNFUTURE, CEX2019-000917-S) and Diputación General de Aragón (Project No. E12-20R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Heteroleptic Ruthenium(II) Complexes with 2,2′-Bipyridines Having Carbonitriles as Anchoring Groups for ZnO Surfaces: Syntheses, Physicochemical Properties, and Applications in Organic Solar Cells, Asymmetric Ruthenium(II) Complexes with 2,2’- Bipyridines Containing Carbonitriles as Anchoring Groups for ZnO Surfaces: Syntheses, Physicochemical Properties and Applications in Organic Solar Cells

  • Salomón, Fernando F.
  • Vega, Nadia C.
  • Jurado, José Piers
  • Morán Vieyra, Faustino E.
  • Tirado, Mónica
  • Comedi, David
  • Campoy Quiles, Mariano
  • Cattaneo, Mauricio
  • Katz, Néstor E.
Heteroleptic ruthenium (II) complexes were used for sensitizing ZnO surfaces in organic solar cells (OSCs) as mediators with photoactive layers. The complexes [Ru(4,4′-X2-bpy)(Mebpy-CN)2]2+ (with X = −CH3, −OCH3 and −N(CH3)2; bpy = 2,2′-bipyridine; Mebpy-CN = 4-methyl-2,2′-bipyridine-4′-carbonitrile) were synthesized and studied by analytical and spectroscopical techniques. Spectroscopic, photophysical, and electrochemical properties were tuned by changing the electron-donating ability of the -X substituents at the 4,4′-positions of the bpy ring and rationalized by quantum mechanical calculations. These complexes were attached through nitrile groups to ZnO as interfacial layer in an OSC device with a PBDB-T:ITIC photoactive layer. This modified inorganic electron transport layer generates enhancement in photoconversion of the solar cells, reaching up to a 23% increase with respect to the unsensitized OSCs. The introduction of these dyes suppresses some degradative reactions of the nonfullerene acceptor due to the photocatalytic activity of zinc oxide, which was maintained stable for about 11 months. Improving OSC efficiencies and stabilities can thus be achieved by a judicious combination of new inorganic and organic materials., The authors thank CONICET (Grant PIP-2015-098), FONCyT (Grant PICT-2016-0553), and UNT (Grant PIUNT 26D/620) for financial support. F.F.S. thanks CONICET for a graduate fellowship. N.C.V., M.T., D.C., F.E.M.V., M.C., and N.E.K. are Members of the Research Career (CONICET). J.P.J. and M.C.Q. acknowledge financial support from the Spanish Ministry Science and Innovation through the “Severo Ochoa” Program for Centers of Excellence in R&D SEV-2015-0496 (FUNMAT) and CEX2019-000917-S (FUNFUTURE) and PGC2018-095411-B-I00 (RAINBOW) projects. This project received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement no. 713673. J.P.J. received financial support through the “la Caixa” INPhINIT Fellowship Grant for Doctoral studies at Spanish Research Centers of Excellence (Grant code: LCF/BQ/IN17/ 11620035), “la Caixa” Banking Foundation (ID100010434), Barcelona, Spain., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Conducting chiral nickel(II) bis(dithiolene) complexes: structural and electron transport modulation with the charge and the number of stereogenic centres

  • Abhervé, Alexandre
  • Mroweh, Nabil
  • Cauchy, Thomas
  • Pop, Flavia
  • Cui, HengBo
  • Kato, Reizo
  • Vanthuyne, Nicolas
  • Alemany, Pere
  • Canadell, Enric
  • Avarvari, Narcis
Nickel(II) bis(dithiolene) complexes can provide crystalline conducting materials either in their monoanionic or neutral forms. Here we show that the use of chiral dithiolene ligands with one or two stereogenic centres, together with variation of the counter-ion in the anionic complexes, represents a powerful strategy to modulate the conducting properties of such molecular materials. The chiral ligands 5-methyl-5,6-dihydro-1,4-dithiin-2,3-dithiolate (me-dddt) and 5,6-dimethyl-5,6-dihydro-1,4-dithiin-2,3-dithiolate (dm-dddt) have been generated from the thione precursors 1 and 2 which have been structurally and chiroptically characterized. Anionic Ni(II) complexes of these two ligands with tetrabutyl-ammonium (TBA) and tetramethyl-ammonium (TMA) have been prepared and structurally characterized, suggesting that it is the nature of the counter-ion which mostly influences the solid state organization of the complexes. Both TBA and TMA radical anion salts are Mott insulators with antiferromagnetic ground state, as suggested by spin polarized DFT band structure calculations. However, the TMA salts are one order of magnitude more conducting than the TBA counterparts. The neutral materials [Ni(me-dddt)2] and [Ni(dm-dddt)2] are direct band gap semiconductors, as determined by DFT and extended Hückel band structure calculations, with their conductivity drastically increased up to 0.05–3.3 S cm−1 under the highest applied pressures of 10–11 GPa. At equivalent applied pressures the dm-dddt materials are more conducting than the me-dddt ones, in agreement with the lower calculated activation energy and larger bands dispersion for the former. This trend follows the structural change when going from one to two methyl substituents, since the packing and intermolecular interactions are completely different between [Ni(dm-dddt)2] and [Ni(me-dddt)2], the packing of the latter being related to the one of the achiral parent [Ni(dddt)2]. Subtle differences of conductivity are also observed within both series of neutral complexes between the enantiopure and racemic forms. This represents the first series of chiral nickel bis(dithiolene) complexes which shows modulation of the conducting properties with the number of stereogenic centres, the conductivity, measured on single crystals, strongly increasing upon applying hydrostatic pressure., This work was supported in France by the National Agency for Research (ANR, Project 15-CE29-0006-01 ChiraMolCo), the CNRS and the University of Angers. Laurent Veyre (CPE Lyon, France) is gratefully acknowledged for technical help with the synthesis of precursor (rac)-2. Work in Spain was supported by MICIU (Spain) through Grants PGC2018-096955-B-C44 and PGC2018-093863-B-C22, and by Generalitat de Catalunya (2017SGR1506 and 2017SGR1289). E. C. acknowledges support of the Spanish MICIU through the Severo Ochoa FUNFUTURE (CEX2019-000917-S) Excellence Centre distinction and P. A. from the Maria de Maeztu Units of Excellence Program (MDM-2017-0767). The work in Japan was supported by JSPS KAKENHI (Grants No. 16H06346)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Local interactions governing the performance of lithium- and manganese-rich cathodes

  • Ali, Shehab E.
  • Olszewski, Wojciech
  • Sorrentino, Andrea
  • Marini, Carlo
  • Kazzazi, Arefehsadat
  • Laszczynski, Nina
  • Birrozzi, Agnese
  • Mullaliu, Angelo
  • Passerini, Stefano
  • Tonti, Dino
  • Simonelli, Laura
The local structural and electronical transformations occurring along the first charge and discharge cycle of Li- and Mn-rich Li[Li0.2Ni0.16Mn0.56Co0.08]O2 cathode material have been characterized by X-ray absorption spectroscopy at several complementary edges. The irreversible spinel formation, occurring at the expenses of the cycling layered phase during the first charge, is quantified (about 10%) and spatially localized. The local strains induced by the Ni oxidation have been evaluated. They induce the formation of a low spin Mn3+ in the layered structure in parallel to the irreversible formation of the spinel phase in the particles bulk. The charge balance has been quantified for all the elements along the first charging cycle, confirming a reversible oxygen oxidation along the charge. Overall, these quantitative results provide an experimental basis for modeling aimed to control the structure and its evolution, for instance, hindering the spinel formation for the benefit of the material cycle life., This research was supported by the Spanish Government, through the “Severo Ochoa” Programme for Centers of Excellence in R&D (FUNFUTURE CEX2019-000917-S), and the projects MAT2017-91404-EXP, RTI2018-096273-B-I00, and RTI2018-097753-B-I00 with FEDER cofunding. D.T. participates in the FLOWBAT 2021 platforms promoted by the Spanish National Research Council (CSIC). The HIU authors acknowledge the basic funding from the Helmholtz Association., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Operando Synchrotron X-ray Diffraction Studies on TiS2: The Effect of Propylene Carbonate on Reduction Mechanism

  • Houdeville, Raphaëlle G.
  • Black, Ashley P.
  • Ponrouch, Alexandre
  • Palacín, M. Rosa
  • Fauth, François
We present herein a systematic study of solvent co-intercalation during electrochemical reduction of titanium disulfide in lithium cells using state of the art in situ cells and synchrotron X-ray diffraction. To understand the role of the electrolyte components, four salts (LiBF4, LiBOB, LiPF6 and LiTFSI) and three solvents (ethylene carbonate, propylene carbonate and dimethyl carbonate) were investigated. Various types of in situ cells were assembled and X-ray diffraction patterns were collected in operando upon cycling. Co-intercalated phase formation was found to be triggered by the presence of propylene carbonate and to be electrochemically driven. This co-intercalated phase is formed in the early stages of reduction, with cell parameters a = 3.514 Å, c = 17.931 Å, corresponding approximately to a tripling of the pristine TiS2 cell along the c-axis. This phase does not seem to evolve upon further oxidation and hence induces an overall loss of capacity. Whereas the nature of the anion does not appear to influence the co-intercalated phase formation, the content of propylene carbonate in the electrolyte is clearly correlated to both its amount and the extent of capacity loss., The authors acknowledge funding from Ministry of Science and Innovation through grant MAT2017–86616-R, from the "Severo Ochoa" Programme for Centres of Excellence in R&D (CEX2019-000917-S). This project has received funding from the European Union's Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement N° 754397. The ALBA synchrotron is acknowledged for provision of beamtime within the in-house project program (proposals 2019013225 and 2020014004)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

[Zn2Ac2(μ-Ac)2(bpymb)]n (Ac, acetate; bpymb, 1,4-bis(4-pyridylmethyl)benzene), a 2D coordination polymer obtained with a flexible N,N’-ditopic bipyridine linker

  • Portolés Gil, Núria
  • Vallcorba, Oriol
  • Domingo Pascual, M. Concepción
  • López Periago, Ana M.
  • Ayllón, José A.
The combination of the flexible N,N’-ditopic ligand 1,4-bis(4-pyridylmethyl)benzene (bpymb) with zinc(II) acetate (ZnAc) affords the synthesis of the two-dimensional coordination polymer [Zn2Ac2(μ-Ac)2(bpymb)]n, which was structurally characterized by single crystal XRD. In the resolved structure, the molar ratio metal:ligand was 2:1 for Ac:Zn. However, half of the acetate units are acting as bridging ligands, which allows the building of a layered structure. The description of this new structure increases the numerous family of compounds involving zinc acetate and a ditopic N,N’- ligand, and demonstrates a new possible architecture. The obtained coordination polymer was also characterized by elemental analysis, ATR-FTIR spectroscopy and TGA analysis. Besides, the photoluminescence properties of this compound where measured, showing that the weak photoluminescence of the free bpymb ligand increases after polymer formation., This work was financed by the Spanish National Plan of Research with project CTQ2017-83632. C.D. and A.M.L.-P. acknowledge the financial support from the Spanish MEC, through the Severo Ochoa Program for Centres of Excellence in R&D FUNFUTURE (CEX2019-000917-S). ALBA synchrotron is acknowledged for the provision of beam time., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Battery Materials Design Essentials

  • Palacín, M. Rosa
The author is grateful to ALISTORE-ERI colleagues for helpful discussions and sustained interaction. The Spanish Research Agency is acknowledged for the Severo Ochoa Programme for Centres of Excellence in R&D (CEX2019-000917-S) and AGAUR (Generalitat de Catalunya) for support via grant 2017 SGR 581., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Photoluminescence of bound-exciton complexes and assignment to shallowdefects in methylammonium/formamidinium lead iodide mixed crystals

  • Francisco López, Adrián
  • Charles, Bethan
  • Alonso Carmona, M. Isabel
  • Garriga Bacardi, Miquel
  • Weller, Mark T.
  • Goñi, Alejandro R.
The high defect tolerance of metal halide perovskites, in terms of their exceptional optoelectronic properties, is assumed to be due to the very fact that most native point defects are shallow, which does not contribute to the non‐radiative recombination of free carriers. Here, a systematic study is presented, which concerns the evolution of shallow‐defect signatures observed at low temperatures in the photoluminescence (PL) spectra of mixed organic‐cation lead iodide perovskite single crystals (FAxMA1−xPbI3, where MA stands for methylammonium and FA for formamidinium). Below ≈100 K, a number of peak‐like features become clearly apparent in the PL spectra at energies lower than the strong free‐exciton emission, which are related to the radiative recombination of bound exciton complexes associated with native shallow defects (donors and/or acceptors). Based on state‐of‐the‐art ab initio calculations, a tentative assignment is provided for all PL features to different shallow‐defects (Pb, I, and MA vacancies as well as I interstitials) typically present in hybrid perovskites. The defect‐related signatures exhibit a clear trend regarding the mixed‐crystal composition, indicating that the material becomes less prone to defect formation with increasing FA content., The authors thank M. Campoy‐Quiles for fruitful discussions. The Spanish “Ministerio de Ciencia e Innovación (MICINN)” is gratefully acknowledged for its support through grant Nos. SEV‐2015‐0496 (FUNMAT) and CEX2019‐000917‐S (FUNFUTURE) in the framework of the Spanish Severo Ochoa Centre of Excellence program and the AEI/FEDER(UE) grant PGC2018‐095411‐B‐100 (RAINBOW). The authors also thank the Catalan agency AGAUR for grant 2017‐SGR‐00488 and the National Network “Red Perovskitas” (MICINN funded). A.F.L. acknowledges an FPI fellowship (BES‐2016‐076913) from MICINN co‐financed by the European Social Fund and the Ph.D. programme in Materials Science from Universitat Autònoma de Barcelona in which he was enrolled. B.C. thanks the EPSRC for Ph.D. studentship funding via the University of Bath, CSCT CDT (EP/G03768X/1)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tuning the tilting of the spiral plane by Mn doping in YBaCuFeO5 multiferroic

  • Zhang, Xiaodong
  • Romaguera, Arnau
  • Fabelo, Oscar
  • Fauth, François
  • Herrero Martín, Javier
  • García Muñoz, Josep Lluís
The layered perovskite YBaCuFeO5 (YBCFO) is considered one of the best candidates to high-temperature chiral multiferroics with strong magnetoelectric coupling. In RBaCuFeO5 perovskites (R: rare-earth or Y) A-site cations are fully ordered whereas their magnetic properties strongly depend on the preparation process. They exhibit partial cationic disorder at the B-site that generates a magnetic spiral stabilized through directionally assisted long range coupling between canted locally frustrated spins. Moreover the orientation of its magnetic spiral can be critical for the magnetoelectric response of this chiral magnetic oxide. We have synthesized and studied YBaCuFe1-xMnxO5 samples doped with Mn, with the aim of increasing spin-orbit coupling effects, and found that the overall Fe/Cu cation disorder at the B-sites can be increased by doping without changing the sample preparation process. In YBaCuFe1-xMnxO5 samples prepared under the same conditions, the T-x magnetic phase diagram have been constructed in the range 10 K-500 K combining magnetometry, X-ray and neutron powder diffraction measurements. The tilting angles of the spins in the collinear, θcol, and spiral phases, θspiral, barely vary with temperature. In the collinear phase θcol is also independent of the Mn content. In contrast, the presence of Mn produces a progressive reorientation of the plane of the magnetic helix in the incommensurate phase, capable to transform the helicoidal spin ordering into a cycloidal one, which may critically determine the ferroelectric and magnetoelectric behavior in these compounds. Some of the observations are of interest for engineering and developing this family of potential high-temperature multiferroics., We acknowledge financial support from the Spanish Ministerio de Ciencia, Innovación y Universidades (MINCIU), through Project No. RTI2018-098537-B-C21, cofunded by ERDF from EU, and “Severo Ochoa” Programme for Centres of Excellence in R&D [FUNFUTURE (CEX2019-000917-S)]. X.Z. was financially supported by China Scholarship Council (CSC) with No. 201706080017. X.Z's work was done as a part of the Ph.D program in Materials Science at Universitat Autònoma de Barcelona. We also acknowledge ALBA, ILL and D1B-CRG (MINCIU) for provision of beam time (dois: 10.5291/ILL-DATA.CRG-2655, 10.5291/ILL-DATA.CRG-2478, 10.5291/ILL-DATA.CRG-2562)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Impact of Chemical Composition on the Nanostructure and Biological Activity of α-Galactosidase-Loaded Nanovesicles for Fabry Disease Treatment

  • Tomsen Melero, Judit
  • Passemard, Solène
  • García Aranda, Natalia
  • Díaz Riascos, Zamira Vanessa
  • González Rioja, Ramon
  • Nedergaard Pedersen, Jannik
  • Lyngsø, Jeppe
  • Merlo Mas, Josep
  • Cristóbal Lecina, Edgar
  • Corchero, José Luis
  • Pulido, Daniel
  • Cámara Sánchez, Patricia
  • Portnaya, Irina
  • Ionita, Inbal
  • Schwartz Jr., Simó
  • Veciana, Jaume
  • Sala Vergés, Santiago
  • Royo, Miriam
  • Córdoba, Diego
  • Danino, Dganit
  • Pedersen, Jan Skov
  • González Mira, Elisabet
  • Abasolo, Ibane
  • Ventosa, Nora
Fabry disease is a rare lysosomal storage disorder characterized by a deficiency of α-galactosidase A (GLA), a lysosomal hydrolase. The enzyme replacement therapy administering naked GLA shows several drawbacks including poor biodistribution, limited efficacy, and relatively high immunogenicity in Fabry patients. An attractive strategy to overcome these problems is the use of nanocarriers for encapsulating the enzyme. Nanoliposomes functionalized with RGD peptide have already emerged as a good platform to protect and deliver GLA to endothelial cells. However, low colloidal stability and limited enzyme entrapment efficiency could hinder the further pharmaceutical development and the clinical translation of these nanoformulations. Herein, the incorporation of the cationic miristalkonium chloride (MKC) surfactant to RGD nanovesicles is explored, comparing two different nanosystems—quatsomes and hybrid liposomes. In both systems, the positive surface charge introduced by MKC promotes electrostatic interactions between the enzyme and the nanovesicles, improving the loading capacity and colloidal stability. The presence of high MKC content in quatsomes practically abolishes GLA enzymatic activity, while low concentrations of the surfactant in hybrid liposomes stabilize the enzyme without compromising its activity. Moreover, hybrid liposomes show improved efficacy in cell cultures and a good in vitro/in vivo safety profile, ensuring their future preclinical and clinical development., This work was supported by the financial support from European Commission through the H2020 program (Smart-4-Fabry project, ID 720942). The Networking Research Centre on Bioengineering, Biomaterials, and Nanomedicine (CIBER-BBN) is financed by the Instituto de Salud Carlos III (ISCIII) with assistance from the European Regional Development Fund (ERDF). This work was also financed by the Ministerio de Ciencia e Innovación (PID2019-105622RB-I00). The work was also partially funded by ISCIII (PI18_00871 cofounded by ERDF) and CIBER-BBN (EXPLORE) granted to I.A. We also acknowledge the ICTS “NANBIOSIS”, more specifically, the support from the Protein Production Platform of CIBER-BBN/IBB, at the UAB SepBioES scientific-technical service (https://www.nanbiosis.es/portfolio/u1-protein-production-platform-ppp/), the Soft Materials Service linked to Biomaterial Processing and Nanostructuring Unit (U6) at ICMAB-CSIC (www.nanbiosis.es/portfolio/u6-biomaterial-processing-and-nanostructuring-unit/), the Synthesis of Peptide Unit (U3) at the IQAC-CSIC (www.nanbiosis.es/portfolio/u3-synthesis-of-peptides-unit/), and the In Vivo Experimental Platform of the Functional Validation & Preclinical Research (FVPR) area (http://www.nanbiosis.es/portfolio/u20-in-vivo-experimental-platform/). We also thank the denomination of the consolidated group from Generalitat de Catalunya: 2017-SGR-1439 (M.R.) and 2017-SGR-918 (J.V.). J.T.-M. thanks the financial support by the FI-AGAUR grant by the Generalitat de Catalunya, especially the Secretary of Universities and Research of the Department of Business and Knowledge of the Generalitat de Catalunya and the European Social Fund (ESF–Investing in your future) of the European Union. This work has been done in the framework of the J.T.-M. doctorate in Materials Science of the Universitat Autònoma de Barcelona. N.G.-A. is supported by a PERIS grant from the Catalan Government (SLT006/17/270). Authors acknowledge financial support from the Agencia Estatal de Investigación-Ministerio de Ciencia e Innovación through the “Severo Ochoa” Programme for Centres of Excellence in R&D (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

New Radical Cation Salts Based on BDH-TTP Donor: Two Stable Molecular Metals with a Magnetic [ReF6]2− Anion and a Semiconductor with a [ReO4]− Anion

  • Kushch, Nataliya D.
  • Shilov, Gennady V.
  • Buravov, Lev I.
  • Yagubskii, Eduard B.
  • Zverev, Vladimir N.
  • Canadell, Enric
  • Yamada, Jun-ichi
Three radical cation salts of BDH-TTP with the paramagnetic [ReF6]2− and diamagnetic [ReO4]− anions have been synthesized: κ-(BDH-TTP)4ReF6 (1), κ-(BDH-TTP)4ReF6·4.8H2O (2) and pseudo-κ″-(BDH-TTP)3(ReO4)2 (3). The crystal and band structures, as well as the conducting properties of the salts, have been studied. The structures of the three salts are layered and characterized by alternating κ-(1, 2) and κ″-(3) type organic radical cation layers with inorganic anion sheets. Similar to other κ-salts, the conducting layers in the crystals of 1 and 2 are formed by BDH-TTP dimers. The partial population of positions of Re atoms and disorder in the anionic layers of 1–3 are their distinctive features. Compounds 1 and 2 show the metallic character of conductivity down to low temperatures, while 3 is a semiconductor. The ac susceptibility of crystals 1 was investigated in order to test the possible slow relaxation of magnetization associated with the [ReF6]2− anion., This research was funded by the Ministry of Science and Higher Education of the Russian Federation (Grant No. 075-15-2020-779). Work in Spain was supported by MICIU (through the Severo Ochoa FUNFUTURE (CEX2019-000917-S) Excellence Centre distinction and Grant PGC 2018-096955-B-C44), and by Generalitat de Catalunya (2017SGR1506)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Boost of charge storage performance of graphene nanowalls electrodes by laser-induced crystallization of metal oxide nanostructures

  • Esqueda Barron, Yasmín
  • Pérez del Pino, Ángel
  • García Lebière, Pablo
  • Musheghyan Avetisyan, Arevik
  • Bertrán Serra, Enric
  • Gyorgy, Eniko
  • Logofatu, Constantin
Major research efforts are being carried out for the technological advancement to an energetically sustainable society. However, for the full commercial integration of electrochemical energy storage devices, not only materials with higher performance should be designed and manufactured but also more competitive production techniques need to be developed. The laser processing technology is well extended at the industrial sector for the versatile and high throughput modification of a wide range of materials. In this work, a method based on laser processing is presented for the fabrication of hybrid electrodes composed of graphene nanowalls (GNWs) coated with different transition-metal oxide nanostructures for electrochemical capacitor (EC) applications. GNW/stainless steel electrodes grown by plasma enhanced chemical vapor deposition were decorated with metal oxide nanostructures by means of their laser surface processing while immersed in aqueous organometallic solutions. The pseudocapacitive nature of the laser-induced crystallized oxide materials prompted an increase of the GNW electrodes’ capacitance by 3 orders of magnitude, up to ca. 28 F/cm3 at 10 mV/s, at both the positive and negative voltages. Finally, asymmetric aqueous and solid-state ECs revealed excellent stability upon tens of thousands of charge–discharge cycles., The authors are grateful for the financial support of the Spanish Ministry of Economy, Industry, and Competitiveness under the projects ENE2017-89210-C2-1-R and ENE2017-89210-C2-2-R and support from AGAUR of Generalitat de Catalunya through projects 2017 SGR 1086. ICMAB acknowledges the financial support from the Spanish Ministry of Economy and Competitiveness, through the ‘Severo Ochoa’ Programme for Centres of Excellence in R&D (CEX2019-000917-S). Y.E.B acknowledges the financial support from CONACyT—Mexico through the postdoctoral scholarship granted 740661. P.G.L thanks the financial support of the Spanish Ministry of Economy, Industry, and Competitiveness through the grant BES-2017-081652 for the formation of scientific researchers. The authors acknowledge the support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Highly transparent and conductive ITO substrates for near infrared applications

  • Maniyara, Rinu Abraham
  • Graham, Christina
  • Paulillo, Bruno
  • Bi, Yu
  • Chen, Yu
  • Herranz, Gervasi
  • Baker, David E.
  • Mazumder, Prantik
  • Konstantatos, Gerasimos
  • Pruneri, Valerio
Indium tin oxide (ITO) is the most widely used transparent conductor in applications such as light emitting diodes, liquid crystal devices, touch screens, and photovoltaic cells. So far, its use has mainly been limited to the visible range (380 nm–750 nm), as it reflects at longer wavelengths and, consequently, its transmission is low. Here, we introduce a simple technique, based on high temperature annealing, which can reduce reflection in the near-infrared range (750 nm–2400 nm). With an optimized set of parameters, we were able to modulate the ITO properties and achieve a high transmission, greater than 80% including substrate contribution, at telecommunication wavelengths (C-band, 1530 nm–1565 nm) while still maintaining high electrical conductivity (resistivity <1.9 × 10−4 Ω cm). By using the newly developed infrared ITO transparent conductor, we demonstrate quantum dot solar cells with 27.7% enhancement in external quantum efficiency at the first exciton peak (1650 nm), and liquid crystal switching devices with 25% enhancement in transmission, with respect to device counterparts incorporating commercially available ITO., We acknowledge financial support from the Spanish Ministry of Economy and Competitiveness through Grant No. MAT2017-85232-R (AEI/FEDER, EU) and the Spanish State Research Agency through the “Severo Ochoa” program for Centers of Excellence in R&D (CEX2019-000910-S and CEX2019-000917 S), and project TUNA-SURF (Grant No. PID2019-106892RB-I00), from Fundació Cellex, Fundació Mir-Puig and from Generalitat de Catalunya through the CERCA program through AGAUR Grant Nos. 2017 SGR 1634 and 2017 301 SGR1377. C.G. acknowledges the funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie Grant Agreement No. 713729. This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie Grant Agreement No. 754510. Y.C. acknowledges the China Scholarship Council (Grant No. 201506890029). The authors also acknowledge Vittoria Finazzi for her help and fruitful discussions., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Molecular Disorder in Crystalline Thin Films of an Asymmetric BTBT Derivative

  • Höfer, Sebastian
  • Unterkofler, Johanna
  • Kaltenegger, Martin
  • Schweicher, Guillaume
  • Ruzié, Christian
  • Tamayo, Adrián
  • Salzillo, Tommaso
  • Mas Torrent, Marta
  • Sanzone, Alessandro
  • Beverina, Luca
  • Geerts, Yves Henry
  • Resel, Roland
The molecule 2-decyl-7-phenyl-[1]benzothieno[3,2-b][1]benzothiophene (Ph-BTBT-10) is an organic semiconductor with outstanding performance in thin-film transistors. The asymmetric shape of the molecule causes an unusual phase behavior, which is a result of a distinct difference in the molecular arrangement between the head-to-head stacking of the molecules versus head-to-tail stacking. Thin films are prepared at elevated temperatures by crystallization from melt under controlled cooling rates, thermal-gradient crystallization, and bar coating at elevated temperatures. The films are investigated using X-ray diffraction techniques. Unusual peak-broadening effects are found, which cannot be explained using standard models. The modeling of the diffraction patterns with a statistic variation of the molecules reveal that a specific type of molecular disorder is responsible for the observed peak-broadening phenomena: the known head-to-head stacking within the crystalline phase is disturbed by the statistic integration of reversed (or flipped) molecules. It is found that 7–15% of the molecules are integrated in a reversed way, and these fractions are correlated with cooling rates during the sample preparation procedure. Temperature-dependent in situ experiments reveal that the defects can be healed by approaching the transition from the crystalline state to the smectic E state at a temperature of 145 °C. This work identifies and quantifies a specific crystalline defect type within thin films of an asymmetric rodlike conjugated molecule, which is caused by the crystallization kinetics., This work was supported by the Fonds de la Recherche Scientifique (FNRS) and the Fonds voor Wetenschappelijk Onderzoek – Vlanderen (FWO) under EOS project 30489208 and the Austrian Science Fund (FWF): [P30222]. YG is also thankful to FNRS for financial support through research projects BTBT n° 2.4565.11, Phasetrans n° T.0058.14, Pi-Fast n° T.0072.18, and 2D to 3D No. 30489208. Financial supports from the French Community of Belgian (ARC n° 20061) and by the Walloon Region (WCS No. 1117306, SOLIDYE n° 1510602) are also acknowledged. G.S. acknowledges postdoctoral fellowship support from the FNRS. M.M. thanks the Spanish Ministry project GENESIS PID2019-111682RB-I00, the “Severo Ochoa” Programme for the Centers of Excellence in R&D (FUNFUTURE, CEX2019-000917-S), and the Generalitat de Catalunya (2017-SGR-918). A.T. is enrolled in the Materials Science PhD program of Universitat Autònoma de Barcelona and acknowledges FPU fellowship from the Spanish Ministry. The large-scale facility Elettra, Trieste, Italy, provided synchrotron radiation for grazing incidence X-ray diffraction experiments at the beamline XRD1., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Formation of Nickel Oxide Nanocuboids in Ferromagnetic La2Ni1−xMn1+xO6

  • Bernal Salamanca, Mónica E.
  • Konstantinović, Z.
  • Frontera, Carlos
  • Fuentes, Víctor
  • Pomar, Alberto
  • Balcells, Lluis
  • Martínez Perea, Benjamín
The control of the spontaneous formation of nanostructures at the surface of thin films is of strong interest in many different fields, from catalysts to microelectronics, because surface and interfacial properties may be substantially enhanced. Here, we analyze the formation of nickel oxide nanocuboids on top of La2Ni1−xMn1+xO6 double perovskite ferromagnetic thin films, epitaxially grown on SrTiO3 (001) substrates by radio-frequency (RF) magnetron sputtering. We show that, by annealing the films at high temperature under high oxygen partial pressure, the spontaneous segregation of nanocuboids is enhanced. The evolution of the structural and magnetic properties of the films is studied as a function of the annealing treatments at different temperatures. It is shown that the formation of NiOx nanocuboids leads to a nanostructured film surface with regions of locally different electrical transport characteristics., We acknowledge financial support from the Spanish Ministry of Science, Innovation and Universities through Severo Ochoa Program (CEX2019-000917-S) and RTI2018-099960-B-I00 (SPINCURIOX) and funding from the European Union’s Horizon 2020 research and innovation program under the Marie-Sklodowska-Curie grant agreement No. 645658 (DAFNEOX Project) and FEDER Program. Z.K. acknowledge the support of the Serbian Ministry of Education, Science and Technological Development (III45018). This work has been performed in the framework of the PhD program of the Universitat Autonoma de Barcelona (UAB)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Encapsulation of Fullerenes: A Versatile Approach for the Confinement and Release of Materials Within Open-Ended Multiwalled Carbon Nanotubes

  • Sandoval, Stefania
  • Tobias, Gerard
We have employed fullerenes as versatile agents to “cork” the open tips of multiwalled carbon nanotubes (MWCNTs), and as promoting species for the release of the inorganic material filled within the nanotubes’ cavities. High Z element compounds, namely, PbI2, ZnI2, and CeI3, were chosen to easily determine the presence of the filler inside the hosting nanotubes by transmission electron microscopy (TEM). Fullerenes can isolate inorganic nanostructures confined within the hollow cavities of MWCNTs, which allows the removal of the external material remnant after the filling. Otherwise, taking advantage of the affinity of fullerenes with selected solvents, we have confirmed the ability of the C60 molecules to promote the displacement of the inorganic guest from the host. We propose two different strategies to trigger the release, employing vapor and liquid phase treatments. The first protocol involves annealing filled MWCNTs in presence of fullerenes (to obtain C60PbI2@MWCNTs) and the subsequent washing of the sample in ethanol under mild conditions. On the other hand, the simultaneous introduction of the C60 molecules and the liberation of the guest are produced by a single step wet procedure; the latter being potentially useful when materials that are not stable at high temperatures are employed for filling., The research leading to these results has received funding from the Spanish Ministry of Economy and Competitiveness (MINECO, Spain) through the grant MAT2014-53500-R. ICMAB acknowledges financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A boron-based electrolyte additive for calcium electrodeposition

  • Forero Saboya, Juan
  • Bodin, Charlotte
  • Ponrouch, Alexandre
In recent years, several organic electrolytes have been reported allowing calcium metal electrodeposition. In all cases, some degree of passivation on the surface of the calcium electrode was reported. Following a recent report on borate-based passivation layer playing a crucial role for Ca plating in electrolyte solutions containing Ca(BF4)2, here we report the use of a boron-containing additive. The presence of this additive allows Ca plating and stripping using a Ca(TFSI)2 containing electrolyte, which otherwise lead to the formation of a fully Ca2+ blocking passivation layer., Funding from the European Union’s Horizon 2020 research and innovation program H2020 is acknowledged: European Research Council (ERC-2016-STG, CAMBAT grant agreement no. 715087) and H2020-MSCA-COFUND-2016 (DOC-FAM, grant agreement no. 754397). A. Ponrouch is grateful to the Spanish Ministry for Economy, Industry and Competitiveness Severo Ochoa Programme for Centres of Excellence in R&D (CEX2019-000917-S). This work has been done in the frame of the Doctoral Degree Program in Materials Science by the Universitat Autònoma de Barcelona. Alistore-European Research Institute is gratefully acknowledged for financial support through the postdoc grant to C. Bodin., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Accelerating organic solar cell material’s discovery: high-throughput screening and big data

  • Rodríguez Martínez, Xabier
  • Pascual San José, Enrique
  • Campoy Quiles, Mariano
The discovery of novel high-performing materials such as non-fullerene acceptors and low band gap donor polymers underlines the steady increase of record efficiencies in organic solar cells witnessed during the last years. Nowadays, the resulting catalogue of organic photovoltaic materials is becoming unaffordably vast to be evaluated following classical experimentation methodologies: their requirements in terms of human workforce time and resources are prohibitively high, which rest momentum to the evolution of the organic photovoltaic technology. As a result, high-throughput experimental and computational methodologies are fostered to leverage their inherently high exploratory paces and accelerate novel material’s discovery. In this review, we present some of the computational (pre)screening approaches performed prior to experimentation to select the most promising molecular candidates from the available materials libraries or, alternatively, generate molecules beyond human intuition. Then, we outline the main high-throuhgput experimental screening and characterization approaches with application in organic solar cells, namely those based on lateral parametric gradients (measuring-intensive) and on automated device prototyping (fabrication-intensive). In both cases, experimental datasets are generated at unbeatable paces, which notably enhance big data readiness. Herein, machine-learning algorithms find a rewarding application niche to retrieve quantitative structure-activity relationships and extract molecular design rationale, which are expected to keep the material’s discovery pace up in organic photovoltaics., This work was supported by the Spanish Ministry of Science and Innovation through the “Severo Ochoa” Programme for Centers of Excellence in R&D (FUNFUTURE, CEX2019-000917-S) and project reference PGC2018-095411-B-I00. The authors acknowledge financial support from the European Research through project ERC CoG 648901, and support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI). The authors thank Prof. C. Brabec and Dr. J. Hauch for fruitful discussions on the topics of this review. The table of contents image and Figure 10 in the manuscript have been designed using freely available resources from Flaticon.com., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Advances in dynamic AFM: From nanoscale energy dissipation to material properties in the nanoscale

  • Santos, Sergio
  • Gadelrab, Karim
  • Lai, Chia-Yun
  • Olukan, Tuza
  • Font, Josep
  • Barcons, Victor
  • Verdaguer, Albert
  • Chiesa, Matteo
Since the inception of the atomic force microscope (AFM), dynamic methods (dynamic atomic force microscopy) have been very fruitful by establishing methods to quantify dissipative and conservative forces in the nanoscale and by providing a means to apply gentle forces to the samples with high resolution. Here, we discuss developments that cover over a decade of our work on energy dissipation, phase contrast, and the extraction of relevant material properties from observables. We describe the attempts to recover material properties via one-dimensional amplitude and phase curves from force models and explore the evolution of these methods in terms of force reconstruction, fits of experimental measurements, and the more recent advances in multifrequency AFM. We further discuss open questions and key possible paths to advance the field., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tryptophanol-Derived Oxazolopyrrolidone Lactams as Potential Anticancer Agents against Gastric Adenocarcinoma

  • Espadinha, Margarida
  • Barcherini, Valentina
  • Gonçalves, Lídia M.
  • Molins, Elies
  • Antunes, Alexandra M. M.
  • Santos, María M. M.
Gastric cancer is one of the deadliest cancers in modern societies, so there is a high level of interest in discovering new drugs for this malignancy. Previously, we demonstrated the ability of tryptophanol-derived polycyclic compounds to activate the tumor suppressor protein p53, a relevant therapeutic target in cancer. In this work, we developed a novel series of enantiomerically pure tryptophanol-derived small molecules to target human gastric adenocarcinoma (AGS) cells. From an initial screening of fourteen compounds in AGS cell line, a hit compound was selected for optimization, leading to two derivatives selective for AGS gastric cells over other types of cancer cells (MDA-MB-231, A-549, DU-145, and MG-63). More importantly, the compounds were non-toxic in normal cells (HEK 293T). Additionally, we show that the growth inhibition of AGS cells induced by these compounds is mediated by apoptosis. Stability studies in human plasma and human liver microsomes indicate that the compounds are stable, and that the major metabolic transformations of these molecules are mono- and di-hydroxylation of the indole ring., This research was funded by FCT (Fundação para a Ciência e a Tecnologia) through iMed.ULisboa (UIDB/04138/2020), CQE (UID/QUI/00100/2020), project PTDC/QUI-QOR/29664/ 2017, principal investigator grants CEECIND/02001/2017 (A. M. M. Antunes), and CEECIND/03143/ 2017 (L. M. Gonçalves), and PhD fellowships SFRH/BD/117931/2016 (M. Espadinha) and PD/BD/ 143126/2019 (V. Barcherini), and funded by Severo Ochoa FunFuture CEX2019-917-S., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Central nervous system delivery of molecules across the blood-brain barrier

  • Gosselet, Fabien
  • Azevedo Loiola, Rodrigo
  • Roig Serra, Anna
  • Rosell, Anna
  • Culot, Maxime
Therapies targeting neurological conditions such as Alzheimer's or Parkinson's diseases are hampered by the presence of the blood-brain barrier (BBB). During the last decades, several approaches have been developed to overcome the BBB, such as the use of nanoparticles (NPs) based on biomaterials, or alternative methods to open the BBB. In this review, we briefly highlight these strategies and the most recent advances in this field. Limitations and advantages of each approach are discussed. Combination of several methods such as functionalized NPs targeting the receptor-mediated transcytosis system with the use of magnetic resonance imaging-guided focused ultrasound (FUS) might be a promising strategy to develop theranostic tools as well as to safely deliver therapeutic molecules, such as drugs, neurotrophic factors or antibodies within the brain parenchyma., This work has been supported under the Euronanomed 8th Joint Call-MAGGBRIS collaborative project by grants from the Spanish Ministry of Science and Innovation (PCIN-2017-090) and Instituto Salud Carlos III (AC17/00004 with FEDER funds) and from the French national agency (ANR-ANR-17-ENM3-0005-01) for FG and RAL. This work has also been supported by the SGR program (2017SGR1427 and 2017SGR765 grants) from the Generalitat de Catalunya. MC thanks the support of the ANR in the framework of the Diasyn project (ERA-Net Euronanomed II JTC2015 grant number: ANR-15 -ENM2 -0002-06)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Polymorphism in non-fullerene acceptors based on indacenodithienothiophene

  • Marina, Sara
  • Scaccabarozzi, Alberto D.
  • Gutiérrez-Fernández, Edgar
  • Solano, Eduardo
  • Khirbat, Aditi
  • Ciammaruchi, Laura
  • Iturrospe, Amaia
  • Balzer, Alex
  • Yu, Liyang
  • Gabirondo, Elena
  • Monnier, Xavier
  • Sardón, Haritz
  • Anthopoulos, Thomas D.
  • Caironi, Mario
  • Campoy Quiles, Mariano
  • Müller, Christian
  • Cangialosi, Daniele
  • Stingelin, Natalie
  • Martín, Jaime
Organic solar cells incorporating non-fullerene acceptors (NFAs) have reached remarkable power conversion efficiencies of over 18%. Unlike fullerene derivatives, NFAs tend to crystallize from solutions, resulting in bulk heterojunctions that include a crystalline acceptor phase. This must be considered in any morphology-function models. Here, it is confirmed that high-performing solution-processed indacenodithienothiophene-based NFAs, i.e., ITIC and its derivatives ITIC-M, ITIC-2F, and ITIC-Th, exhibit at least two crystalline forms. In addition to highly ordered polymorphs that form at high temperatures, NFAs arrange into a low-temperature metastable phase that is readily promoted via solution processing and leads to the highest device efficiencies. Intriguingly, the low-temperature forms seem to feature a continuous network that favors charge transport despite of a poorly order along the π–π stacking direction. As the optical absorption of the structurally more disordered low-temperature phase can surpass that of the more ordered polymorphs while displaying comparable—or even higher—charge transport properties, it is argued that such a packing structure is an important feature for reaching highest device efficiencies, thus, providing guidelines for future materials design and crystal engineering activities., This work is supported by the Ministerio de Ciencia e Innovacion/FEDER (under Ref. PGC2018-094620-A-I00 and PGC2018-095411-B-I00, CEX2019-000917-S and PGC2018- 095411-B-100) and the Basque Country Government (Ref. PIBA19-0051). S.M. is grateful to POLYMAT for the doctoral scholarship. The authors thank A. Arbe, A. Alonso-Mateo, L. Hueso for their support and access to characterization tools. The authors also thank the technical and human support provided by SGIker of UPV/EHU and European funding (ERDF and ESF). GIWAXS experiments were performed at BL11 NCD-SWEET beamline at ALBA Synchrotron (Spain) with the collaboration of ALBA staff. J.M and E.F.-G. acknowledge support through the European Union's Horizon 2020 research and innovation program, H2020-FETOPEN 01- 2018-2020 (FET-Open Challenging Current Thinking), ‘LION-HEARTED', grant agreement n. 828984. J.M and N.S. would like to thank the financial support provided by the IONBIKE RISE project, which has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 823989. N.S. and A.K. and A.B. furthermore are grateful to the U.S. National Science Foundation (NSF) for support via project # 1905901 within NSF’s Division of Materials Research. A. S. and M. C. acknowledge financial support by the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program “HEROIC,” grant agreement 638059. This work was partially carried out at Polifab, the micro- and nanotechnology center of the Politecnico di Milano. .C.M. thanks the Knut and Alice Wallenberg Foundation for funding through the project “Mastering Morphology for Solution-borne Electronics”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

pH-Responsive Self-Assembly of Amyloid Fibrils for Dual Hydrolase-Oxidase Reactions

  • Díaz Caballero, Marta
  • Navarro, Susanna
  • Nuez Martínez, Miquel
  • Peccati, Francesca
  • Rodríguez Santiago, Luis
  • Sodupe, Mariona
  • Teixidor, Francesc
  • Ventura, Salvador
There is an increasing interest in synthetic systems that can execute bioinspired chemical reactions without requiring the complex structures that characterize enzymes in their components. The hierarchical self-assembly of peptides provides a means to create catalytic microenvironments. Ideally, as it occurs in enzymes, the catalytic activity of peptide nanostructures should be reversibly regulated. In a typical enzyme mimetic design, the peptide’s self-assembling and catalytic activities are segregated into different regions of the sequence. Here, we aimed to design minimal peptides in which the self-assembly and function were all encoded in the same amino acids. Moreover, we wanted to endow the resulting one-component nanomaterial with divergent, chemically unrelated, catalytic activities, a property not observed in natural enzymes. We show that short peptides consisting only of histidine and tyrosine residues, arranged in a binary pattern, form biocompatible amyloid-like fibrils and hydrogels combining hydrolytic and electrocatalytic activities. The nanofibers’ mesoscopic properties are controlled by pH, the transition between assembled active β-sheet fibrils, and disassembled inactive random coil species occurring in a physiologically relevant pH range. The structure of one of such amyloid-like fibrils, as derived from molecular dynamic simulations, provides insights on how they attain this combination of structural and catalytic properties., We acknowledge the technical support from the Cell Culture Unit of Servei de Cultius Cel·lulars i Producció d’Anticossos i Citometria (SCAC) and of the Servei de Microscopia from Universitat Autònoma de Barcelona (UAB). F.P. acknowledges the Mizutani Foundation for Glycoscience (200077). M.S. and L.R.S. gratefully acknowledge financial support from MINECO (CTQ2017-89132-P) and the Generalitat de Catalunya (2017SGR1323)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Magnetic nanoparticles: An indicator of health risks related to anthropogenic airborne particulate matter

  • Kermenidou, M.
  • Balcells, Lluis
  • Martínez Boubeta, Carlos
  • Chatziavramidis, A.
  • Konstantinidis, I.
  • Samaras, T.
  • Sarigiannis, D.
  • Simeonidis, Konstantinos
Due to their small dimensions, airborne particles are able to penetrate through inhalation into many human organs, from the lungs to the cardiovascular system and the brain, which can threaten our health. This work establishes a novel approach of collecting quantitative data regarding the fraction, the composition and the size distribution of combustion-emitted particulate matter through the magnetic characterization and analysis of samples received by common air pollution monitoring. To this end, SQUID magnetometry measurements were carried out for samples from urban and suburban areas in Thessaloniki, the second largest city of Greece, taking into consideration the seasonal and weekly variation of airborne particles levels as determined by occurring traffic and meteorological conditions. The level of estimated magnetically-responding atmospheric particulate matter was at least 0.5 % wt. of the collected samples, mostly being present in the form of ultrafine particles with nuclei sizes of approximately 14 nm and their aggregates. The estimated quantities of magnetic particulate matter show maximum values during autumn months (0.8 % wt.) when increased commuting takes place, appearing higher in the city center by up to 50% than those in suburban areas. In combination with high-resolution transmission electron imaging and elemental analysis, it was found that Fe3O4 and similar ferrites, some of them attached to heavy metals (Co, Cr), are the dominant magnetic contributors arising from anthropogenic high-temperature processes, e.g. due to traffic emissions. Importantly, nasal cytologic samples collected from residents of both central and suburban areas showed same pattern in what concerns magnetic behavior, thus verifying the critical role of nanosized magnetic particles in the assessment of air pollution threats. Despite the inherent statistical limitations of our study, such findings also indicate the potential transmission of infectious pathogens by means of pollution-derived nanoparticles into the respiratory system of the human body., This project has received funding from the EU-H2020 research and innovation programme under grant agreement No 654360 having benefitted from the access provided by ICMAB-CSIC and Universitat Autonoma de Barcelona in Bellaterra-Barcelona within the framework of the NFFA-Europe Transnational Access Activity. Authors would like to thank Anna Esther Carrillo for the experimental assistance during SEM observations, Bernat Bozzo for the support in SQUID measurements and Emma Rossinyol for carrying out the HRTEM imaging., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Steric hindrance in metal coordination drives the separation of pyridine regioisomers using rhodium(II)-based metal–organic polyhedra

  • Hernández-López, Laura
  • Martínez Esaín, Jordi
  • Carné-Sánchez, Arnau
  • Grancha, Thais
  • Faraudo, Jordi
  • Maspoch, Daniel
The physicochemical similarity of isomers makes their chemical separation through conventional techniques energy intensive. Herein, we report that, instead of using traditional encapsulation‐driven processes, steric hindrance in metal coordination on the outer surface of RhII‐based metal–organic polyhedra (Rh‐MOPs) can be used to separate pyridine‐based regioisomers via liquid–liquid extraction. Through molecular dynamics simulations and wet experiments, we discovered that the capacity of pyridines to coordinatively bind to Rh‐MOPs is determined by the positions of the pyridine substituents relative to the pyridine nitrogen and is influenced by steric hindrance. Thus, we exploited the differential solubility of bound and non‐bound pyridine regioisomers to engineer liquid–liquid self‐sorting systems. As a proof of concept, we separated four different equimolecular mixtures of regioisomers, including a mixture of the industrially relevant compounds 2‐chloropyridine and 3‐chloropyridine, isolating highly pure compounds in all cases., This work was supported by the Spanish MINECO (project RTI2018‐095622‐B‐I00) and the Catalan AGAUR (project 2017 SGR 238). It was also funded by the CERCA Programme/Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa programme from the Spanish MINECO (Grant No. SEV‐2017‐0706). A.C.S. and T.G. thank the Spanish MINECO for Juan de la Cierva fellowships (IJCI‐2016–29802 and FJCI‐2017–31598). L.H. acknowledges the support from the Spanish State Research Agency (PRE2019‐088056). J.F.G. acknowledges funding from the Spanish Research Agency (AEI, CTQ2017‐87262‐R, EUR2019‐103824). The project that generated these results received support from a fellowship (LCF/BQ/PR20/11770011) of the “la Caixa” Foundation (ID 100010434). We thank CESGA Supercomputing center for technical support and computer time at the supercomputer Finisterrae II., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Structural features, magnetic and ferroelectric properties of SrFe10.8In1.2O19 compound

  • Turchenko, Vitalii
  • Kostishin, V.G.
  • Trukhanov, Sergei
  • Damay, Francoise
  • Balasoiu, Maria
  • Bozzo, Bernat
  • Fina, Ignasi
  • Burkhovetsky, Valeriy V.
  • Polosan, Silviu
  • Zdorovets, M.V.
  • Kozlovskiy, A.L.
  • Astapovich, K.A.
  • Trukhanov, Alex
The effect of temperature on the features of the crystal and magnetic structures, as well as the magnetic properties of the solid solution of SrFe10.8In1.2O19 hexaferrite was investigated. The appearance of ferroelectric properties was detected at room temperature, which contradicts the generally accepted opinion on the description of the crystal structure of hexaferrites within the framework of the centrosymmetric P63/mmc (No. 194) space group. The reasons of spontaneous polarization in solid solutions of hexaferrites remain controversial. No deviation from the collinear magnetic structure was found in the investigated temperature range from 1.5 to 350 K, while the thermal expansion of the unit cell was practically absent in the range from 1.5 to 50 K. The crystal structure of hexaferrites was considered in the framework of both centrosymmetric P63/mmc and non-centrosymmetric P63mc space groups, which allowed us to associate the emerging spontaneous polarization with unequal distortions of neighboring oxygen polyhedra., Investigations were performed under financial support from the Russian Science Foundation (Agreement No. 19-19-00694 of 06 May 2019)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Recombinant Human Epidermal Growth Factor/Quatsome Nanoconjugates: A Robust Topical Delivery System for Complex Wound Healing

  • Ferrer Tasies, Lidia P.
  • Santana, Hector
  • Cabrera, Ingrid
  • González Mira, Elisabet
  • Ballell Hosa, Lídia
  • Castellar Álvarez, Carla
  • Córdoba, Alba
  • Merlo Mas, Josep
  • Gerónimo, Haydee
  • Chinea, Glay
  • Falcón, Viviana
  • Moreno Calvo, Evelyn
  • Pedersen, Jan Skov
  • Romero, Jessica
  • Navarro Requena, Claudia
  • Valdés, Calixto
  • Limonta, Miladys
  • Berlanga Acosta, Jorge
  • Sala Vergés, Santiago
  • Martínez, Eduardo
  • Veciana, Jaume
  • Ventosa, Nora
A multitude of microparticles and nanoparticles is developed to improve the delivery of different small drugs and large biomolecules, which are subject to several hindering biological barriers that limit their optimal biodistribution and therapeutic effects. Here, a soft, reliable, and scalable method based on compressed CO2 is reported for obtaining nanoconjugates of recombinant human epidermal growth factor and nanovesicles called quatsomes, where the latter consists of cholesterol and cetyltrimethylammonium bromide. These nanoconjugates exhibit appropriate values of the major critical quality attributes of colloidal nanomedicines, such as controlled and narrow nanoscopic particle size distribution (which play important roles in determining their stability), drug loading, drug release, drug protection, targeting ability, and bioactivity. Also, they exhibit a dual action by 1) inbuilt antimicrobial activity preventing infections and 2) promoting regeneration of granulation tissue and re‐epithelialization with complete closure of complex wounds. Therefore, such nanoconjugates are a potential nanomedicine for the topical treatment of complex wounds, particularly diabetic foot ulcers and venous leg ulcers., L.F.‐T and H.S. contributed equally to this work. This work was funded by the Spanish Ministry/FEDER project MOTHER MAT2016–80826‐R; the Networking Research Center on Bioengineering, Biomaterials, and Nanomedicine (CIBER‐BBN); the Generalitat de Catalunya (2017SGR918); and the Spanish Ministry of Economy and Competitiveness by the Severo Ochoa FUNFUTURE (CEX2019‐000917‐S) Excellence Centre distinction. This work was also co‐financed by the European Union through FEDER project NANONAFRES (COMRDI15‐1‐0023). The authors thank Milagros Font and Yenay Diaz from CIGB for technical assistance. The authors also thank the Industrial Doctorates Plan of Agaur‐Generalitat de Catalunya (2018 DI 057). Some figures of this work were created using Servier Medical Art templates, which are licensed under a Creative Commons Attribution 3.0 Unported License., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Interaction of Luminescent Defects in Carbon Nanotubes with Covalently Attached Stable Organic Radicals

  • Berger, Felix J.
  • Sousa, J. Alejandro de
  • Zhao, Shen
  • Zorn, Nicolas F.
  • El Yumin, Abdurrahman Ali
  • Quintana García, Aleix
  • Settele, Simon
  • Högele, Alexander
  • Crivillers, Núria
  • Zaumseil, Jana
The functionalization of single-walled carbon nanotubes (SWCNTs) with luminescent sp3 defects has greatly improved their performance in applications such as quantum light sources and bioimaging. Here, we report the covalent functionalization of purified semiconducting SWCNTs with stable organic radicals (perchlorotriphenylmethyl, PTM) carrying a net spin. This model system allows us to use the near-infrared photoluminescence arising from the defect-localized exciton as a highly sensitive probe for the short-range interaction between the PTM radical and the SWCNT. Our results point toward an increased triplet exciton population due to radical-enhanced intersystem crossing, which could provide access to the elusive triplet manifold in SWCNTs. Furthermore, this simple synthetic route to spin-labeled defects could enable magnetic resonance studies complementary to in vivo fluorescence imaging with functionalized SWCNTs and facilitate the scalable fabrication of spintronic devices with magnetically switchable charge transport., The authors thank Dr. Vega Lloveras for performing electron paramagnetic resonance measurements. This project has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement no. 817494 “TRIFECTs”). S.Z. acknowledges funding from the Alexander von Humboldt Foundation, and A.H. from the European Research Council (ERC) under the grant agreement no. 772195 and the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) under Germany’s Excellence Strategy EXC-2111-390814868. This work was also supported by the MICIU of Spain (PID2019-111682RB-I00), the Generalitat de Catalunya (2017-SGR-918), and the Severo Ochoa FUNFUTURE (CEX2019-000917-S). J.A.d.S. is enrolled in the Materials Science Ph.D. program of UAB. J.A.d.S. thanks the FPI fellowship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Finding the Limits of Magnetic Hyperthermia on Core-Shell Nanoparticles Fabricated by Physical Vapor Methods

  • Martínez Boubeta, Carlos
  • Simeonidis, Konstantinos
  • Oró, Judith
  • Makridis, Antonios
  • Serantes, David
  • Balcells, Lluis
Magnetic nanoparticles can generate heat when exposed to an alternating magnetic field. Their heating efficacy is governed by their magnetic properties that are in turn determined by their composition, size and morphology. Thus far, iron oxides (e.g., magnetite, Fe3O4) have been the most popular materials in use, though recently bimagnetic core-shell structures are gaining ground. Herein we present a study on the effect of particle morphology on heating efficiency. More specifically, we use zero waste impact methods for the synthesis of metal/metal oxide Fe/Fe3O4 nanoparticles in both spherical and cubic shapes, which present an interesting venue for understanding how spin coupling across interfaces and also finite size effects may influence the magnetic response. We show that these particles can generate sufficient heat (hundreds of watts per gram) to drive hyperthermia applications, whereas faceted nanoparticles demonstrate superior heating capabilities than spherical nanoparticles of similar size., We thank the CNRS-PROMES laboratory, UPR 8521, belonging to the French National Centre for Scientific Research (CNRS) for providing access to its installations, the support of its scientific and technical staff (N. Boullet, E. Guillot, A. Badziaka), and the financial support of the SFERA-III project (Grant Agreement No 823802). Spanish Ministry of Science, Innovation and Universities through grant (CEX2019-000917-S) in the framework of the Spanish Severo Ochoa Centre of Excellence Program and RTI2018-099960-B-I00 (SPINCURIOX). This research is cofinanced by Greece and the European Union (European Social Fund-ESF) through the Operational Programme “Human Resources Development, Education and Lifelong Learning” in the context of the project “Reinforcement of Postdoctoral Researchers—2nd Cycle” (MIS-5033021), implemented by the State Scholarships Foundation (IKΥ)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ammonium monoethyloxalate (AmEtOx): a new agent for the conservation of carbonate stone substrates

  • Aragoni, M. Carla
  • Giacopetti, Laura
  • Arca, Massimiliano
  • Carcangiu, Gianfranco
  • Columbu, Stefano
  • Gimeno, Domingo
  • Isaia, Francesco
  • Lippolis, Vito
  • Meloni, Paola
  • Navarro Ezquerra, Antonia
  • Podda, Enrico
  • Rius, Jordi
  • Vallcorba, Oriol
  • Pintus, Anna
The ammonium salt of monoethyloxalate (AmEtOx) was investigated as a novel precursor for the conservation of carbonate stone substrates, such as biomicritic limestone and marble. Full characterization of treated and untreated authentic stone samples was carried out by means of SEM, X-ray powder diffraction, synchrotron tts-μXRD measurements, mercury intrusion porosimetry, determination of water transport properties, and pull-off tests. The improved solubility (1.49 M, 20.1% w/w) of AmEtOx as compared to that of ammonium oxalate (AmOx; 0.4 M, 5% w/w) results in the formation of microcrystalline phases 30–50 and 200–500 μm thick of calcium oxalate mono-(whewellite) or dihydrate (weddellite), on marble and biomicrite samples, respectively, after treatment with AmEtOx 5% and 12% w/w aqueous solutions. As a result, a reduction in the porosity of the stone samples and an enhancement of their cohesion are observed. DFT calculations, carried out to investigate the hydrolysis reaction leading from AmEtOx to AmOx, showed that the localization of the Lowest Unoccupied Molecular Orbital (LUMO) and the natural charge distribution account nicely for the tendency to hydrolyse observed experimentally, eventually leading to the formation of whewellite and weddellite on the stone surface., M. A., M. C. A., F. I., and V. L. thank the Fondazione di Sardegna (FdS) and Regione Autonoma della Sardegna (RAS) (Progetti Biennali di Ateneo FdS/RAS annualità 2016) for financial support. A. P. acknowledges RAS for the funding in the context of the POR FSE 2014–2020 (CUP F24J17000190009). Comune di Cagliari, Segretariato Regionale per i Beni e le attività culturali per la Sardegna, and Soprintendenza Archeologia, Belle Arti e Paesaggio per la città metropolitana di Cagliari e le province di Oristano e Sud Sardegna are kindly acknowledged for supporting the Cultural Heritage Conservation Laboratory “Colle di Bonaria” in their research and teaching activities., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Soluble alkali-metal carbon nanotube salts for n-type thermoelectric composites with improved stability

  • Dörling, Bernhard
  • Rodríguez Martínez, Xabier
  • Álvarez Corzo, Ivan
  • Reparaz, J. S.
  • Campoy Quiles, Mariano
We present a method to dissolve carbon nanotubes that simultaneously allows to prepare n-doped films. These films are composed of thinner bundles of longer tubes when compared to films prepared using surfactants and sonication. Their negative Seebeck coefficient and high electrical conductivity make them good candidates for thermoelectric applications. We investigate their stability in air by aging them at elevated temperatures, showing stabilities over 500 h, which is further improved by the use of crown ethers. Finally, we demonstrate the usefulness of the prepared materials by fabricating an organic thermoelectric generator comprising 40 legs., The authors acknowledge financial support from the Spanish Ministry of Science and Innovation through the “Severo Ochoa” Program for Centers of Excellence in R&D (No. CEX2019-000917-S), Nos. PGC2018-095411-B-I00 and MAT2017-90024-P (TANGENTS)-EI/FEDER; from the Generalitat de Catalunya and European Union (FEDER) through AGAUR 2018 PROD 00191; and from the European Research Council (ERC) under Grant Agreement No. 648901. We also thank Professor Alejandro R. Goñi (ICMAB) for fruitful discussions., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Growth-mode and interface structure of epitaxial ultrathin MgO/Ag(001) films

  • Santis, Maurizio De
  • Langlais, Véronique
  • Schneider, Kathrin
  • Torrelles, Xavier
MgO ultrathin films are of great technological importance as electron tunneling barrier in electronics and spintronics, and as template for metallic clusters in catalysis and for molecular networks for 2D electronics. The wide band-gap of MgO allows for a very effective decoupling from the substrate. The films morphology and the detailed structure of the interface are crucial for applications, controlling the electronic transfer. Using surface x-ray diffraction, we studied the growth-mode and the structure of MgO/Ag(001) ultrathin films elaborated by reactive molecular beam epitaxy as function of the substrate temperature. We observed that deposition of about 1 monolayer results in an MgO(001) film in coherent epitaxy, with the oxygen atoms on top of silver as predicted by DFT calculations, and an interlayer distance at the interface of about 270 pm. Under well-defined conditions, a sharp MgO bilayer is formed covering a fraction of the substrate surface., Financial support through ANR EQUIPEX ANR-11-EQPX-0010 and beam time at the French CRG BM32 beamline of the ESRF are acknowledged. KS, VL and XT acknowledge the EU Fund for Regional Development (FEDER) through the Interreg-POCTEFA program of the Project EFA194/16/TNSI., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Magnetocapacitance effect and magnetoelectric coupling in type-II multiferroic HoFeWO6

  • Adnani, Moein
  • Gooch, Melissa
  • Deng, Liangzi
  • Agrestini, Stefano
  • Herrero Martín, Javier
  • Wu, Hung-Cheng
  • Chang, Chung-Kai
  • Salavati-fard, Taha
  • Poudel, Narayan
  • García Muñoz, Josep Lluís
  • Daneshmandi, Samira
  • Wu, Zheng
  • Grabow, Lars C.
  • Lai, Yen-Chung
  • Yang, Hung-Duen
  • Pellegrin, Eric
  • Chu, Ching-Wu
We have investigated the multiferroicity and magnetoelectric (ME) coupling in HoFeWO6. With a noncentrosymmetric polar structure (space group Pna21) at room temperature, this compound shows an onset of electric polarization with an antiferromagnetic ordering at the Néel temperature (TN ) of 17.8 K. The magnetic properties of the polycrystalline samples were studied by DC and AC magnetization and heat capacity measurements. The metamagnetic behavior at low temperatures was found to be directly related to the dielectric properties of the compound. In particular, field-dependent measurements of capacitance show a magnetocapacitance (MC) effect with double-hysteresis loop behavior in direct correspondence with the magnetization. Our x-ray diffraction results show the Pna21 structure down to 8 K and suggest the absence of a structural phase transition across TN . Soft x-ray absorption spectroscopy and soft x-ray magnetic circular dichroism (XMCD) measurements at the Fe L2,3 and Ho M4,5 edges revealed the oxidation state of Fe and Ho cations to be 3+. Fe L2,3 XMCD further shows that Fe3+ cations are antiferromagnetically ordered in a noncollinear fashion with spins arranged 90◦ with respect to each other. Our findings show that HoFeWO6 is a type-II multiferroic exhibiting a MC effect. The observed MC effect and the change in polarization by the magnetic field, as well as their direct correspondence with magnetization, further support the strong ME coupling in this compound., The work at University of Houston (UH) is supported by U. S. Air Force Office of Scientific Research Grants FA9550-15-1-0236 and FA9550-20-1-0068, the T. L. L. Temple Foundation, the John J. and Rebecca Moores Endowment, and the State of Texas through the Texas Center for Superconductivity at the University of Houston. The XRD patterns were collected at the National Synchrotron Radiation Research Center at Taiwan. The synchrotron XAS/XMCD experiments were performed at the BOREAS beamline of the ALBA Synchrotron Light Facility in collaboration with ALBA staff. Computational resources were provided by the Extreme Science and Engineering Discovery Environment (XSEDE) [55] supported by the National Science Foundation (ACI-1548562) and the National Energy Research Scientific Computing (NERSC) Center, a DOE Office of Science User Facility supported by the Office of Science, U. S. Department of Energy, under Contract No. DE-AC02-05CH11231. Additional support for this work was provided through resources of the uHPC cluster managed by UH and acquired through NSF Award 1531814. The authors acknowledge the use of the Maxwell/Opuntia/Sabine Cluster and the advanced support from the Research Computing Data Core at UH. The work at National Sun Yat-Sen University was partially supported by the Ministry of Science and Technology of Taiwan under Grant No. MOST 109-2112-M-110-019., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Unusual stoichiometry, band structure and band filling in conducting enantiopure radical cation salts of TM-BEDT-TTF showing helical packing of the donors

  • Pop, Flavia
  • Mézière, Cécile
  • Allain, Magali
  • Auban-Senzier, Pascale
  • Tajima, Naoya
  • Hirobe, Daichi
  • Yamamoto, Hiroshi M.
  • Canadell, Enric
  • Avarvari, Narcis
Electrocrystallization of tetramethyl-bis(ethylenedithio)-tetrathiafulvalene (TM-BEDT-TTF) (1) as pure (S,S,S,S) and (R,R,R,R) enantiomers in the presence of (n-Bu4N)2(Mo6O19) and chloroform or bromoform afforded a series of four isostructural enantiopure radical cation salts [(S/R)-1]9(Mo6O19)5·(CHX3)2 (X = Cl, Br) crystallizing in the trigonal non-centrosymmetric space group R32. In the formula unit there are six donors of type A and three donors of type B showing, respectively, (ax, ax, eq, eq) and all-ax conformations (ax = axial, eq = equatorial) of the methyl substituents. The donors form a hexagonal network in the ab plane with a helical twist between them leading to lateral orbital overlap interactions. Electrocrystallization of the racemic donor provided the compound [(rac)-1]2(Mo6O19) which crystallized in the monoclinic system P21/n. Single crystal resistivity measurements show semiconducting behaviour of the enantiopure materials with a relatively high room temperature conductivity of 0.8–1.2 S cm−1, but rather insensitive to applied pressures of up to 2.3 GPa. Analysis of the electronic structure of the conducting solids through extended Hückel tight-binding band structure calculations indicates a Mott insulator behaviour explaining the semiconducting character and suggests that these compounds are valuable candidates for Dirac cone materials. Further insight into the conducting properties is provided by preliminary field effect transistor measurements., This work was supported in France by the National Agency for Research (ANR, Project 15-CE29-0006-01 ChiraMolCo), the CNRS and the University of Angers. Work at Bellaterra (Spain) was supported by the Spanish MICIU through Grant PGC2018-096955-B-C44 and the Severo Ochoa FUNFUTURE (CEX2019-000917-S) Excellence Centre distinction as well as by Generalitat de Catalunya (2017SGR1506). This work was also partially supported in Chiba, Japan by MEXT = JSPJ KAKENHI under Grants No. 16H06346 and 20K03870. Work in Okazaki was supported by Grant-in-Aid for Scientific Research (A) (Grant Number 19H00891) and Grant-in-Aid for Challenging Research (Exploratory) (Grant Number 20K20903) from JSPS as well as PRESTO (Grant Number JPMJPR20L9) from JST., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Crystal engineering and ferroelectricity at the nanoscale in epitaxial 1D manganese oxide on silicon

  • Gómez Rodríguez, Andrés
  • Vila Fungueiriño, José Manuel
  • Jolly, Claire
  • Garcia Bermejo, Ricardo
  • Oró, Judith
  • Ferain, Etienne
  • Mestres, Narcís
  • Magén, César
  • Gázquez, Jaume
  • Rodriguez Carvajal, Juan
  • Carretero Genevrier, Adrian
Ferroelectric oxides have attracted much attention due to their wide range of applications, particularly in electronic devices such as nonvolatile memories and tunnel junctions. As a result, the monolithic integration of these materials into silicon technology and their nanostructuration to develop alternative cost-effective processes are among the central points in the current technology. In this work, we used a chemical route to obtain nanowire thin films of a novel Sr1+δMn8O16 (SMO) hollandite-type manganese oxide on silicon. Scanning transmission electron microscopy combined with crystallographic computing reveals a crystal structure comprising hollandite and pyrolusite units sharing the edges of their MnO6 octahedra, resulting in three types of tunnels arranged along the c axis, where the ordering of the Sr atoms produces natural symmetry breaking. The novel structure gives rise to ferroelectricity and piezoelectricity, as revealed by local direct piezoelectric force microscopy measurements, which confirmed the ferroelectric nature of the SMO nanowire thin films at room temperature and showed a piezoelectric coefficient d33 value of 22 ± 6 pC N−1. Moreover, we proved that flexible vertical SMO nanowires can be harvested providing an electrical output energy through the piezoelectric effect, showing excellent deformability and high interface recombination. This work indicates the possibility of engineering the integration of 1D manganese oxides on silicon, a step which precedes the production of microelectronic devices., A. C.-G., C. J., R. G.-B. and J. M. V.-F. acknowledge the financial support from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (No. 803004) and the French Agence Nationale de la Recherche (ANR), project Q-NOSS ANR ANR-16-CE09-0006-01. This project has received funding from the EU-H2020 research and innovation program under grant agreement no 654360 having benefitted from the access provided by ICMAB-CSIC in Barcelona within the framework of the NFFA-Europe Transnational Access Activity. This project has received funding from the European's Union Horizon 2020 research and innovation programme under Grant No. 823717-ESTEEM3, the Spanish Ministry of Economy and Competitivity through Project MAT2017-82970-C2-2-R, and the Aragon Regional Government through Project No. E13_20R (with European Social Fund). We acknowledge SOLEIL for provision of synchrotron radiation facilities, and we would like to thank Pierre Fertey for assistance in using beamline Cristal. J. G. also acknowledges the Ramon y Cajal program (RYC-2012-11709). The authors thank D. Montero for providing the FEGSEM images. N. M. acknowledges the Spanish Ministry of Science, Innovation and Universities through Severo Ochoa FUNFUTURE (CEX2019-000917-S) and SUMATE (RTI2018-095853-B-C21) projects, co-financed by the European Regional Development Fund. The FEGSEM instrumentation was facilitated by the Institut des Matériaux de Paris Centre (IMPC FR2482). The authors thank Frederic Pichot for his expertise and advice during the nanowire lithographic process. The STEM microscopy work was conducted in the Laboratorio de Microscopias Avanzadas (LMA) at Instituto de Nanociencia de Aragon (INA) at the University of Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Homogeneous and stable (+)-usnic acid loaded liposomes prepared by compressed CO2

  • Battista, Sara
  • Köber, Mariana
  • Vargas Nadal, Guillem
  • Veciana, Jaume
  • Giansanti, Luisa
  • Ventosa, Nora
The administration of hydrophobic actives and drugs for medical or cosmetical purposes generally requires a formulation that ensures adequate water solubility, which can be achieved through the encapsulation in liposomes. For the vehiculation of (+)-usnic acid (UA), a hydrophobic compound with antioxidant activity, we have prepared liposomes in a one-step process using compressed CO2. The investigated formulations are mainly composed of 1,2-dimyristoyl-sn-glycero-3-phosphocholine and cholesterol, but contain also a small molar fraction (10%) of a synthetic surfactant derived from L-prolinol. In previous investigations liposomes containing L-prolinol derivatives showed a higher efficacy as DNA or drug delivery systems with respect to liposomes of mere phospholipids. As a consequence, they were added to liposomes to make them more suitable UA delivery systems. By testing different surfactant chain lengths and headgroups, we studied how the chemical nature of the surfactant affects the physicochemical vesicle properties and their interaction with UA. Most formulations, especially those containing surfactants with longer alkyl chains (C14 and C16), show a good potentiality as UA delivery systems because they exhibit a higher stability, vesicle-to-vesicle homogeneity and bilayer compaction with respect to analog liposomes prepared by the conventional thin film hydration previously investigated. Our results confirm the advantages of DELOS-SUSP also in the case of mixed liposomes containing phospholipids and synthetic ionic surfactants. Moreover, this study demonstrates that liposomes composed of the same lipids can feature different properties if prepared according to different methodologies. In addition, this investigation points out that also the properties that a solute included in the bilayer show can be affected by the technique used for liposomes preparation., This work was financially supported by the Ministry of Economy, Industry and Competitiveness of Spain through the “MOTHER” project (MAT2016-80826-R). Furthermore, the research leading to these results has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement N° 712949 (TECNIOspring PLUS) and from the Agency for Business Competitiveness of the Government of Catalonia. The preparation of liposomes and their characterization were performed by the ICTS “NANBIOSIS”, more specifically by the Biomaterial Processing and Nanostructuring Unit (U6), Unit of the CIBER in Bioengineering, Biomaterials & Nanomedicine (CIBER-BBN) located at the Institute of Materials Science of Barcelona (ICMAB-CSIC), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Thickness effect on ferroelectric properties of La-doped HfO2 epitaxial films down to 4.5 nm

  • Song, Tingfeng
  • Bachelet, Romain
  • Saint-Girons, Guillaume
  • Dix, Nico
  • Fina, Ignasi
  • Sánchez Barrera, Florencio
Stabilization of the orthorhombic phase of HfO2 with La allows very high polarization and endurance. However, these properties have not been confirmed yet in films having thickness of less than 10 nm. We have grown (111)-oriented La (2 at%) doped epitaxial HfO2 films on SrTiO3(001) and Si(001) substrates, and we report on the thickness dependence of their ferroelectric properties. Films of less than 7 nm have a high remanent polarization of about 30 µC cm-2 , show slight wakeup, endurance of at least 1010 cycles and retention of more than 10 years, both latest properties measured at the same poling voltage. La-doped HfO2 films even as thin as 4.5 nm also show robust ferroelectric properties., Financial support from the Spanish Ministry of Science and Innovation, through the Severo Ochoa FUNFUTURE (CEX2019- 000917-S), MAT2017-85232-R (AEI/FEDER, EU), PID2020- 112548RB-I00 (AEI/FEDER, EU), and PID2019-107727RB-I00 (AEI/FEDER, EU) projects, from CSIC through the i-LINK (LINKA20338) program, and from Generalitat de Catalunya (2017 SGR 1377) is acknowledged. Project supported by a 2020 Leonardo Grant for Researchers and Cultural Creators, BBVA Foundation. IF acknowledges Ramón y Cajal contract RYC-2017- 22531. TS is financially supported by China Scholarship Council (CSC), grant No. 201807000104. TS work has been done as a part of his Ph.D. program in Materials Science at Universitat Autònoma de Barcelona. RB and GSG acknowledge the financial support from the European Commission through the project TIPS (No. H2020-ICT-02-2014-1-644453), from the French national research agency (ANR) through the projects DIAMWAFEL (No. ANR-15-CE08-0034), and MITO (No. ANR-17- CE05-0018), and from CNRS through the MITI interdisciplinary programs (project NOTE). They are also grateful to the joint laboratory INL-RIBER, P. Regreny, C. Botella and J. B. Goure for the MBE technical support on the Nanolyon technological platform., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Allocation of Ambipolar Charges on an Organic Diradical with a Vinylene–Phenylenediyne Bridge

  • Mayorga-Burrezo, Paula
  • Bejarano, Francesc
  • Calbo, Joaquín
  • Zhao, Xiaotao
  • Sousa, J. Alejandro de
  • Lloveras, Vega
  • Bryce, Martin R.
  • Ortí, Enrique
  • Veciana, Jaume
  • Rovira, Concepció
  • Crivillers, Núria
Two redox and magnetically active perchlorotriphenylmethyl (• PTM) radical units have been connected as end-capping groups to a bis(phenylene)diyne chain through vinylene linkers. Negative and positive charged species have been generated, and the influence of the bridge on their stabilization is discussed. Partial reduction of the electron-withdrawing • PTM radicals results in a class-II mixed-valence system with the negative charge located on the terminal PTM units, proving the efficiency of the conjugated chain for the electron transport between the two terminal sites. Counterintuitively, the oxidation process does not occur along the electron-rich bridge but on the vinylene units. The • PTM radicals play a key role in the stabilization of the cationic species, promoting the generation of quinoidal ring segments., This work was supported by the MICINN of Spain (Projects CTQ2016-80030-R, PGC2018-099568-B-I00 (EU Feder Funds), PID2019-111682RB-I00, Severo Ochoa FUNFUTURE CEX2019-000917-S, and María de Maeztu CEX2019- 000919-M), the Generalitat de Catalunya (2017-SGR-918), the Generalitat Valenciana (PROMETEO/2020/077), and the Networking Research Center on Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN) Development Fund. P.M.- B. gratefully thanks financial support from the Juan de la Cierva-Formación 2015 programme (FJCI-2015-23577) supported by MICINN. F.B. thanks the MECD for a predoctoral FPU fellowship. J.C. acknowledges the Generalitat Valenciana (APOSTD/2017/081). J.A.d.S. is enrolled in the Materials Science doctoral program of the UAB. J.A.d.S. thanks the MINECO for the FPI-SO fellowship. The authors acknowledge A. Bernabé from ICMAB for the MALDI-ToF measurements and Dr. Mireia Díaz and Dr. Marta Vilaseca, from the IRB Barcelona Mass Spectrometry and Proteomics Core Facility (unity member of ProteoRed, PRB3-ISCIII, supported by Grant PRB3 (IPT17/0019-ISCIII-SGEFI/ERDF), for the ES+ ToF MS experiments. The work in Durham was supported by the EC FP7 ITN project MOLESCO (606728)., Peer reviewed