Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 36
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Sulfate-Decorated Amorphous-Crystalline Cobalt-Iron Oxide Nanosheets to Enhance O-O Coupling in the Oxygen Evolution Reaction

  • Wang, Xiang
  • Li, Junshan|||0000-0002-1482-1972
  • Xue, Qian
  • Han, Xu|||0000-0001-8319-8830
  • Xing, Congcong|||0000-0001-7674-6720
  • Liang, Zhifu
  • Guardia, Pablo|||0000-0001-9076-4642
  • Zuo, Yong|||0000-0003-1564-467X
  • Du, Ruifeng
  • Balcells i Argemí, Lluís|||0000-0001-6603-7357
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The electrochemical oxygen evolution reaction (OER) plays a fundamental role in several energy technologies, which performance and cost-effectiveness are in large part related to the used OER electrocatalyst. Herein, we detail the synthesis of cobalt-iron oxide nanosheets containing controlled amounts of well-anchored SO42- anionic groups (CoFexOy-SO4). We use a cobalt-based zeolitic imidazolate framework (ZIF-67) as the structural template and a cobalt source and Mohr's salt ((NH4)2Fe(SO4)2·6H2O) as the source of iron and sulfate. When combining the ZIF-67 with ammonium iron sulfate, the protons produced by the ammonium ion hydrolysis (NH4+ + H2O = NH3·H2O + H+) etch the ZIF-67, dissociating its polyhedron structure, and form porous assemblies of two-dimensional nanostructures through a diffusion-controlled process. At the same time, iron ions partially replace cobalt within the structure, and SO42- ions are anchored on the material surface by exchange with organic ligands. As a result, ultrathin CoFexOy-SO4 nanosheets are obtained. The proposed synthetic procedure enables controlling the amount of Fe and SO4 ions and analyzing the effect of each element on the electrocatalytic activity. The optimized CoFexOy-SO4 material displays outstanding OER activity with a 10 mA cm-2 overpotential of 268 mV, a Tafel slope of 46.5 mV dec-1, and excellent stability during 62 h. This excellent performance is correlated to the material's structural and chemical parameters. The assembled nanosheet structure is characterized by a large electrochemically active surface area, a high density of reaction sites, and fast electron transportation. Meanwhile, the introduction of iron increases the electrical conductivity of the catalysts and provides fast reaction sites with optimum bond energy and spin state for the adsorption of OER intermediates. The presence of sulfate ions at the catalyst surface modifies the electronic energy level of active sites, regulates the adsorption of intermediates to reduce the OER overpotential, and promotes the surface charge transfer, which accelerates the formation of oxygenated intermediates. Overall, the present work details the synthesis of a high-efficiency OER electrocatalyst and demonstrates the introduction of nonmetallic anionic groups as an excellent strategy to promote electrocatalytic activity in energy conversion technologies.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Palladium Hydride on C2N to Boost Formate Oxidation

  • Wang, Xiang
  • Montaña-Mora, Guillem|||0000-0003-1208-6836
  • Han, Xu|||0000-0001-8319-8830
  • Yu, Jing|||0000-0002-7620-745X
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Liang, Zhifu
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Li, Junshan|||0000-0002-1482-1972
The lack of electrocatalysts for the formate oxidation reaction (FOR) hampers the deployment of direct formate fuel cells (DFFCs). To overcome this limitation, herein, we detail the production of palladium hydride particles supported on CN (PdH@CN) via a facile method. PdH@CN displays excellent FOR performance, reaching current densities up to 5.6 A·mg and stable cycling and chronoamperometric operation. The Pd lattice expands due to the hydrogen intercalation. Besides, an electronic redistribution associated with the distinct electronegativity of Pd and H is observed. Both phenomena modify the electron energy levels, enhancing the activity and stability of the composite catalyst. More specifically, differential functional theory calculations show H intercalation to downshift the Pd d-band center in Pd@CN, weakening adsorbate binding and accelerating the FOR rate-determining step.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Thermoelectric Performance of Surface-Engineered Cu1.5-xTe-Cu2Se Nanocomposites

  • Xing, Congcong|||0000-0001-7674-6720
  • Zhang, Yu|||0000-0002-0332-0013
  • Xiao, Ke
  • Han, Xu|||0000-0001-8319-8830
  • Liu, Yu|||0000-0001-7313-6740
  • Nan, Bingfei|||0000-0002-7128-6056
  • Garcia Ramon, Maria|||0000-0003-1097-1639
  • Lim, Khak Ho|||0000-0003-3116-8589
  • Li, Junshan|||0000-0002-1482-1972
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Poudel, Bed|||0000-0001-7760-2016
  • Nozariasbmarz, Amin|||0000-0003-2789-9469
  • Li, Wenjie|||0000-0003-4509-3303
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
CuS and CuSe have recently been reported as promising thermoelectric (TE) materials for medium-temperature applications. In contrast, CuTe, another member of the copper chalcogenide family, typically exhibits low Seebeck coefficients that limit its potential to achieve a superior thermoelectric figure of merit, zT, particularly in the low-temperature range where this material could be effective. To address this, we investigated the TE performance of CuTe-CuSe nanocomposites by consolidating surface-engineered CuTe nanocrystals. This surface engineering strategy allows for precise adjustment of Cu/Te ratios and results in a reversible phase transition at around 600 K in CuTe-CuSe nanocomposites, as systematically confirmed by in situ high-temperature X-ray diffraction combined with differential scanning calorimetry analysis. The phase transition leads to a conversion from metallic-like to semiconducting-like TE properties. Additionally, a layer of CuSe generated around CuTe nanoparticles effectively inhibits CuTe grain growth, minimizing thermal conductivity and decreasing hole concentration. These properties indicate that copper telluride based compounds have a promising thermoelectric potential, translated into a high dimensionless zT of 1.3 at 560 K.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

On the role of ceria in Ni-Al₂O₃ catalyst for CO₂ plasma methanation

  • Biset-Peiró, Martí|||0000-0002-1255-7733
  • Guilera, Jordi
  • Zhang, Ting
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Andreu, Teresa|||0000-0002-2804-4545
The effect of Ce loading content on Ni-CeO₂/Ni-Al₂O₃ catalysts for CO₂ plasma methanation was evaluated. Catalysts were prepared by one-pot evaporation-induced self-assembly, Ni content was fixed at 15 wt. %, while CeO₂ ranged 0-50 wt. %. The catalysts performances were tested under atmospheric pressure in two operation modes, thermal- and plasma-catalysis. As for conventional thermal catalysis, the catalyst was thermally activated between 200 and 400 °C; while in plasma-catalysis, the catalyst was activated by plasma generated by a dielectric barrier discharges (DBD) reactor. By the application of plasma in the catalyst bed, the reaction temperature was reduced from 350 °C to 150 °C to obtain the same level of conversion than thermal-catalysis. In addition, the incorporation of Ce in Ni-CeO₂/Ni-Al₂O₃ led to an improvement of the catalytic performance in both thermal- and plasma-catalysis. Nevertheless, divergences on the optimum Ce content were found. On plasma experiments, the catalyst was more active at a lower amount of CeO₂ (˜10 wt.%) with respect to thermal catalysis (˜40 wt.%), reducing the catalyst fabrication cost. Those differences highlights that the CO generated by plasma CO₂ dissociation has a significant role for methane production, and thus the need to consider the by-products as reactant for the optimization of catalysts composition for DBD plasma-catalysis.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

High Thermoelectric Performance in Crystallographically Textured n-Type Bi2Te3- xSex Produced from Asymmetric Colloidal Nanocrystals

  • Liu, Yu|||0000-0001-7313-6740
  • Zhang, Yu|||0000-0002-0332-0013
  • Lim, Khak Ho|||0000-0003-3116-8589
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Ortega, Silvia|||0000-0002-3812-5146
  • Li, Mengyao|||0000-0002-9082-7938
  • David, Jérémy|||0000-0003-3219-149X
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Ng, Ka Ming
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Kovalenko, Maksym V.|||0000-0002-6396-8938
  • Cadavid, Doris|||0000-0002-1376-6078
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
In the present work, we demonstrate crystallographically textured n-type BiTeSe nanomaterials with exceptional thermoelectric figures of merit produced by consolidating disk-shaped BiTeSe colloidal nanocrystals (NCs). Crystallographic texture was achieved by hot pressing the asymmetric NCs in the presence of an excess of tellurium. During the hot press, tellurium acted both as lubricant to facilitate the rotation of NCs lying close to normal to the pressure axis and as solvent to dissolve the NCs approximately aligned with the pressing direction, which afterward recrystallize with a preferential orientation. NC-based BiTeSe nanomaterials showed very high electrical conductivities associated with large charge carrier concentrations, n. We hypothesize that such large n resulted from the presence of an excess of tellurium during processing, which introduced a high density of donor Te antisites. Additionally, the presence in between grains of traces of elemental Te, a narrow band gap semiconductor with a work function well below BiTeSe, might further contribute to increase n through spillover of electrons, while at the same time blocking phonon propagation and hole transport through the nanomaterial. NC-based BiTeSe nanomaterials were characterized by very low thermal conductivities in the pressing direction, which resulted in ZT values up to 1.31 at 438 K in this direction. This corresponds to a ca. 40% ZT enhancement from commercial ingots. Additionally, high ZT values were extended over wider temperature ranges due to reduced bipolar contribution to the Seebeck coefficient and the thermal conductivity. Average ZT values up to 1.15 over a wide temperature range, 320 to 500 K, were measured, which corresponds to a ca. 50% increase over commercial materials in the same temperature range. Contrary to most previous works, highest ZT values were obtained in the pressing direction, corresponding to the c crystallographic axis, due to the predominance of the thermal conductivity reduction over the electrical conductivity difference when comparing the two crystal directions.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Upscaling high activity oxygen evolution catalysts based on CoFe2O4 nanoparticles supported on nickel foam for power-to-gas electrochemical conversion with energy efficiencies above 80%

  • Urbain, Félix|||0000-0001-5423-6818
  • Du, Ruifeng
  • Tang, PengYi|||0000-0002-2306-095X
  • Smirnov, Vladimir
  • Andreu, Teresa|||0000-0002-2804-4545
  • Finger, Friedhelm
  • Jiménez Divins, Nuria
  • Llorca, Jordi|||0000-0002-7447-9582
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Morante, Joan Ramon|||0000-0002-4981-4633
We investigate cobalt ferrite nanoparticles (NPs) supported on large-scale electrodes as oxygen evolution reaction (OER) catalysts. Colloidal CoFeO NPs were loaded on low-cost and high surface area nickel foam (NF) scaffolds. The coating process was optimized for large electrode areas, ensuring a proper distribution of the NPs on the NF that allowed overcoming the electrical conductivity limitations of oxide NPs. We were able to produce CoFeO-coated NFs having 10 cm geometric surface areas with overpotentials below 300 mV for the OER at a current density of 50 mA/cm. Such impressively low overpotentials suggested using CoFeO NP-based electrodes within a water electrolysis device. In this prototype device, stable operating currents up to 500 mA at remarkably low cell-voltages of 1.62 and 1.53 V, at ambient and 50 °C electrolyte temperatures, respectively, were reached during operation periods of up to 50 h. The high electrochemical energy efficiencies reached at 50 mA/cm, 75% and 81% respectively, rendered these devices particularly appealing to be combined with low-cost photovoltaic systems for bias-free hydrogen production. Therefore, CoFeO NP-based electrolysers were coupled to low-cost thin-film silicon solar cells with 13% efficiency to complete a system that afforded solar-to-fuel efficiencies above 10%.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Combined High Catalytic Activity and Efficient Polar Tubular Nanostructure in Urchin-Like Metallic NiCo2Se4 for High-Performance Lithium-Sulfur Batteries

  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Jacas Biendicho, Jordi|||0000-0001-5981-6168
  • Zhang, Ting|||0000-0002-0317-9662
  • Du, Ruifeng
  • Li, Junshan|||0000-0002-1482-1972
  • Yang, Xuhui
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Zhou, Yingtang|||0000-0002-8678-295X
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Urchin-shaped NiCoSe (u-NCSe) nanostructures as efficient sulfur hosts are synthesized to overcome the limitations of lithium-sulfur batteries (LSBs). u-NCSe provides a beneficial hollow structure to relieve volumetric expansion, a superior electrical conductivity to improve electron transfer, a high polarity to promote absorption of lithium polysulfides (LiPS), and outstanding electrocatalytic activity to accelerate LiPS conversion kinetics. Owing to these excellent qualities as cathode for LSBs, S@u-NCSe delivers outstanding initial capacities up to 1403 mAh g at 0.1 C and retains 626 mAh g at 5 C with exceptional rate performance. More significantly, a very low capacity decay rate of only 0.016% per cycle is obtained after 2000 cycles at 3 C. Even at high sulfur loading (3.2 mg cm), a reversible capacity of 557 mAh g is delivered after 600 cycles at 1 C. Density functional theory calculations further confirm the strong interaction between NCSe and LiPS, and cytotoxicity measurements prove the biocompatibility of NCSe. This work not only demonstrates that transition metal selenides can be promising candidates as sulfur host materials, but also provides a strategy for the rational design and the development of LSBs with long-life and high-rate electrochemical performance.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Multilayered Hematite Nanowires with Thin-Film Silicon Photovoltaics in an All-Earth-Abundant Hybrid Tandem Device for Solar Water Splitting, Insights into the Combination of Multilayered Hematite Nanowires with Thin-Film Silicon Photovoltaics in an All-Earth-Abundant Hybrid Tandem Device for Solar Water Splitting

  • Urbain, Félix|||0000-0001-5423-6818
  • Tang, PengYi|||0000-0002-2306-095X
  • Smirnov, Vladimir
  • Welter, Katharina
  • Andreu, Teresa|||0000-0002-2804-4545
  • Finger, Friedhelm
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Morante, Joan Ramon|||0000-0002-4981-4633
The concept of hybrid tandem device structures that combine metal oxides with thin-film semiconducting photoabsorbers holds great promise for large-scale, robust, and cost-effective bias-free photoelectrochemical water splitting (PEC-WS). This work highlights important steps toward the efficient coupling of high-performance hematite photoanodes with multijunction thin-film silicon photocathodes providing high bias-free photocurrent density. The hybrid PEC-WS device is optimized by testing three types of multijunction silicon photocathodes with the hematite photoanode: amorphous silicon (a-Si:H) tandem: a-Si:H/a-Si:H and triple junction with microcrystalline silicon (μc-Si:H): a-Si:H/a-Si:H/μc-Si:H and a-Si:H/μc-Si:H/μc-Si:H. The results provide evidence that the multijunction structures offer high flexibility for hybrid tandem devices with regard to tunable photovoltages and spectral matching. Furthermore, both photoanode and photocathode are tested under various electrolyte and light concentration conditions, respectively, with respect to their photoelectrochemical performance and stability. A 27 % enhancement in the solar-to-hydrogen conversion efficiency is observed upon concentrating light from 100 to 300 mW cm . Ultimately, bias-free water splitting is demonstrated, with a photocurrent density of 4.6 mA cm (under concentrated illumination) paired with excellent operation stability for more than 24 h of the all-earth-abundant and low-cost hematite/silicon tandem PEC-WS device.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

MoSx@NiO Composite Nanostructures, An Advanced Nonprecious Catalyst for Hydrogen Evolution Reaction in Alkaline Media

  • Ibupoto, Zafar Hussain
  • Tahira, Aneela
  • Tang, PengYi|||0000-0002-2306-095X
  • Liu, Xianjie
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Fahlman, Mats
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Vagin, Mikhail
  • Vomiero, Alberto|||0000-0003-2935-1165
The design of the earth-abundant, nonprecious, efficient, and stable electrocatalysts for efficient hydrogen evolution reaction (HER) in alkaline media is a hot research topic in the field of renewable energies. A heterostructured system composed of MoS deposited on NiO nanostructures (MoS @NiO) as a robust catalyst for water splitting is proposed here. NiO nanosponges are applied as cocatalyst for MoS in alkaline media. Both NiO and MoS @NiO composites are prepared by a hydrothermal method. The NiO nanostructures exhibit sponge-like morphology and are completely covered by the sheet-like MoS . The NiO and MoS exhibit cubic and hexagonal phases, respectively. In the MoS @NiO composite, the HER experiment in 1 m KOH electrolyte results in a low overpotential (406 mV) to produce 10 mA cm current density. The Tafel slope for that case is 43 mV per decade, which is the lowest ever achieved for MoS -based electrocatalyst in alkaline media. The catalyst is highly stable for at least 13 h, with no decrease in the current density. This simple, cost-effective, and environmentally friendly methodology can pave the way for exploitation of MoS @NiO composite catalysts not only for water splitting, but also for other applications such as lithium ion batteries, and fuel cells.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Tailor-made metal-nitrogen-carbon bifunctional electrocatalysts for rechargeable Zn-air batteries via controllable MOF units

  • Zhang, Xuan|||0000-0002-3667-4280
  • Luo, Jiangshui
  • Lin, Heng-Fu
  • Tang, PengYi|||0000-0002-2306-095X
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Wan, Kai|||0000-0003-4689-310X
  • Mao, Bing-Wei
  • Liu, Li-Min
  • Fransaer, Jan|||0000-0002-0232-0687
The majority of chemical syntheses involve the use of catalysts, which play a crucial role in the yield and conversion rates of chemical reactions. In view of the increasing demand for chemical commodities and specialties linked to the growth of the world's population and the living standards, highly efficient and low-cost catalysts are urgently required. The metal-nitrogen-carbon (M-N-C) catalysts family is one of the most promising candidates. In this work, a series of benzene-1,3,5-tricarboxylate linker based metal organic frameworks (MOFs) were used as self-sacrificial templates and tunable platform for designable preparation of M-N-C catalysts. Changing the pillars between the 2D layers and the nature of the metal ions in the pristine MOFs significantly influenced the structure, chemical composition and catalytic activity of the resulting M-N-C catalysts for the oxygen reduction reaction (ORR). Furthermore, the influence of the MOF units on the catalyst performance, the role of the metals in the M-N-C catalysts and the primary catalytically active sites for ORR were explored by a combination of density functional theory (DFT), in-depth structural and chemical/elemental characterizations, and electrochemical studies. Among the prepared catalysts, Co-BTC-bipy-700 exhibited the highest electrocatalytic activity for oxygen reduction reaction (ORR), which showed a larger limiting current density and similar half-wave potentials with less catalyst degradation and much higher methanol tolerance than the commercial Pt/C catalyst. Meanwhile, as a bifunctional electrocatalyst, Co-BTC-bipy-700 catalyst was also employed for oxygen evolution reaction (OER) and demonstrated a lower overpotential (lowered by 140 mV at a current density of 10 mA cm) and better durability than IrO. Furthermore, in terms of device performance, the Zn-air battery enabled by Co-BTC-bipy-700 catalyst reached a maximum specific energy as high as 1009.8 Wh kg, which is 76.5% of the theoretical value (1320 Wh kg), and demonstrated higher discharge potential and lower charge potential than that based on the Pt/C catalyst. Importantly, the presented strategy for tailor-made M-N-C catalysts by controlling the synthesis of the pristine MOFs could offer a guide map for the future design of M-N-C catalysts family not only for electrochemical reactions but also beyond electrochemistry.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Boosting Photoelectrochemical Water Oxidation of Hematite in Acidic Electrolytes by Surface State Modification

  • Tang, PengYi|||0000-0002-2306-095X
  • Han, Li-Juan
  • Hegner, Franziska Simone
  • Paciok, Paul
  • Biset-Peiró, Martí|||0000-0002-1255-7733
  • Du, Hong-Chu
  • Wei, Xiankui|||0000-0003-4320-1120
  • Jin, Lei
  • Xie, Haibing|||0000-0002-5070-2882
  • Shi, Qin
  • Andreu, Teresa|||0000-0002-2804-4545
  • Lira-Cantu, Monica|||0000-0002-3393-7436
  • Heggen, Marc|||0000-0002-2646-0078
  • Dunin-Borkowski, Rafal E.|||0000-0001-8082-0647
  • López, Núria|||0000-0001-9150-5941
  • Galán-Mascarós, José Ramón|||0000-0001-7983-9762
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
State-of-the-art water-oxidation catalysts (WOCs) in acidic electrolytes usually contain expensive noble metals such as ruthenium and iridium. However, they too expensive to be implemented broadly in semiconductor photoanodes for photoelectrochemical (PEC) water splitting devices. Here, an Earth-abundant CoFe Prussian blue analogue (CoFe-PBA) is incorporated with core-shell FeO/FeTiO type II heterojunction nanowires as composite photoanodes for PEC water splitting. Those deliver a high photocurrent of 1.25 mA cm at 1.23 V versus reversible reference electrode in acidic electrolytes (pH = 1). The enhancement arises from the synergic behavior between the successive decoration of the hematite surface with nanolayers of FeTiO and then, CoFe-PBA. The underlying physical mechanism of performance enhancement through formation of the FeO/FeTiO/CoFe-PBA heterostructure reveals that the surface states' electronic levels of hematite are modified such that an interfacial charge transfer becomes kinetically favorable. These findings open new pathways for the future design of cheap and efficient hematite-based photoanodes in acidic electrolytes.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Insight into the Degradation Mechanisms of Atomic Layer Deposited TiO2 as Photoanode Protective Layer

  • Ros, Carles|||0000-0002-9148-2767
  • Carretero González, Nina Magali
  • David, Jérémy|||0000-0003-3219-149X
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Andreu, Teresa|||0000-0002-2804-4545
  • Morante, Joan Ramon|||0000-0002-4981-4633
Around 100 nm thick TiO layers deposited by atomic layer deposition (ALD) have been investigated as anticorrosion protective films for silicon-based photoanodes decorated with 5 nm NiFe catalyst in highly alkaline electrolyte. Completely amorphous layers presented high resistivity; meanwhile, the ones synthesized at 300 °C, having a fully anatase crystalline TiO structure, introduced insignificant resistance, showing direct correlation between crystallization degree and electrical conductivity. The conductivity through crystalline TiO layers has been found not to be homogeneous, presenting preferential conduction paths attributed to grain boundaries and defects within the crystalline structure. A correlation between the conductivity atomic force microscopy measurements and grain interstitials can be seen, supported by high-resolution transmission electron microscopy cross-sectional images presenting defective regions in crystalline TiO grains. It was found that the conduction mechanism goes through the injection of electrons coming from water oxidation from the electrocatalyst into the TiO conduction band. Then, electrons are transported to the Si/SiO/TiO interface where electrons recombine with holes given by the pn-Si junction. No evidences of intra-band-gap states in TiO responsible of conductivity have been detected. Stability measurements of fully crystalline samples over 480 h in anodic polarization show a continuous current decay. Electrochemical impedance spectroscopy allows to identify that the main cause of deactivation is associated with the loss of TiO electrical conductivity, corresponding to a self-passivation mechanism. This is proposed to reflect the effect of OH ions diffusing in the TiO structure in anodic conditions by the electric field. This fact proves that a modification takes place in the defective zone of the layer, blocking the ability to transfer electrical charge through the layer. According to this mechanism, a regeneration of the degradation process is demonstrated possible based on ultraviolet illumination, which contributes to change the occupancy of TiO electronic states and to recover the defective zone's conductivity. These findings confirm the connection between the structural properties of the ALD-deposited polycrystalline layer and the degradation mechanisms and thus highlight main concerns toward fabricating long-lasting metal-oxide protective layers for frontal illuminated photoelectrodes.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Tailoring Copper Foam with Silver Dendrite Catalysts for Highly Selective Carbon Dioxide Conversion into Carbon Monoxide

  • Urbain, Félix|||0000-0001-5423-6818
  • Tang, PengYi|||0000-0002-2306-095X
  • Carretero González, Nina Magali
  • Andreu, Teresa|||0000-0002-2804-4545
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Morante, Joan Ramon|||0000-0002-4981-4633
The present study outlines the important steps to bring electrochemical conversion of carbon dioxide (CO ) closer to commercial viability by using a large-scale metallic foam electrode as a highly conductive catalyst scaffold. Because of its versatility, it was possible to specifically tailor three-dimensional copper foam through coating with silver dendrite catalysts by electrodeposition. The requirements of high-yield CO conversion to carbon monoxide (CO) were met by tuning the deposition parameters toward a homogeneous coverage of the copper foam with nanosized dendrites, which additionally featured crystallographic surface orientations favoring CO production. The presented results evidence that Ag dendrites, owing a high density of planes with stepped (220) surface sites, paired with the superior active surface area of the copper foam can significantly foster the CO productivity. In a continuous flow-cell reactor setup, CO Faradaic efficiencies reaching from 85 to 96% for a wide range of low applied cathode potentials (<1.0 V ) along with high CO current densities up to 27 mA/cm were achieved, far outperforming other tested scaffold materials. Overall, this research provides new strategic guidelines for the fabrication of efficient and versatile cathodes for CO conversion compatible with large-scale integrated prototype devices.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Engineering grain boundaries at the 2D limit for the hydrogen evolution reaction

  • He, Yongmin|||0000-0002-9347-930X
  • Tang, PengYi|||0000-0002-2306-095X
  • Hu, Zhili
  • He, Qiyuan|||0000-0001-9083-8285
  • Zhu, Chao|||0000-0002-1589-855X
  • Wang, Luqing
  • Zeng, Qingsheng
  • Golani, Prafful
  • Gao, Guanhui
  • Fu, Wei
  • Huang, Zhiqi
  • Gao, Caitian
  • Xia, Juan
  • Wang, Xingli
  • Wang, Xuewen
  • Zhu, Chao|||0000-0002-1589-855X
  • Ramasse, Quentin|||0000-0001-7466-2283
  • Zhang, Ao|||0000-0002-9427-9641
  • An, Boxing
  • Zhang, Yongzhe
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Wang, Liang|||0000-0002-3771-4627
  • Tay, Beng Kang|||0000-0002-3776-3648
  • Yakobson, Boris I.
  • Trampert, Achim|||0000-0001-7949-643X
  • Zhang, Hua|||0000-0001-9518-740X
  • Wu, Minghong|||0000-0002-9776-671X
  • Wang, Qi Jie|||0000-0002-9910-1455
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Liu, Zheng|||0000-0002-8825-7198
Atom-thin transition metal dichalcogenides (TMDs) have emerged as fascinating materials and key structures for electrocatalysis. So far, their edges, dopant heteroatoms and defects have been intensively explored as active sites for the hydrogen evolution reaction (HER) to split water. However, grain boundaries (GBs), a key type of defects in TMDs, have been overlooked due to their low density and large structural variations. Here, we demonstrate the synthesis of wafer-size atom-thin TMD films with an ultra-high-density of GBs, up to ~10 12 cm -2. We propose a climb and drive 0D/2D interaction to explain the underlying growth mechanism. The electrocatalytic activity of the nanograin film is comprehensively examined by micro-electrochemical measurements, showing an excellent hydrogen-evolution performance (onset potential: -25 mV and Tafel slope: 54 mV dec -1), thus indicating an intrinsically high activation of the TMD GBs.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Stability of Pd3Pb nanocubes during electrocatalytic thanol oxidation

  • Yu, Xiaoting|||0000-0003-0457-4047
  • Luo, Zhishan|||0000-0002-0801-9238
  • Zhang, Ting|||0000-0002-0317-9662
  • Tang, PengYi|||0000-0002-2306-095X
  • Li, Junshan|||0000-0002-1482-1972
  • Wang, Xiang
  • Llorca, Jordi|||0000-0002-7447-9582
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Liu, Junfeng|||0000-0003-3164-6472
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Intermetallic PdPb nanocrystals with controlled size and cubic geometry exposing (100) facets are synthesized and tested as electrocatalysts for ethanol oxidation in alkaline media. We observe the ethanol oxidation activity and stability to be size-dependent. The 10 nm PdPb nanocrystals display the highest initial current densities, but after few hundred cycles, the current density of smaller nanocrystals becomes much larger. All of the catalysts exhibit a pronounced current decay during the first 500 s of continuous operation, which is associated with the accumulation of strongly adsorbed reaction intermediates, blocking reaction sites. These adsorbed species can be removed by cycling the catalysts or maintaining them at slightly higher potentials for a short period of time to oxidize and later reduce the Pd surface. Such simple cleaning processes, that can be performed during operation breaks without cell disassembly, is sufficient to effectively remove the poisoning species adsorbed on the surface and recover the electrocatalytic activity.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Cobalt hexacyanoferrate as a selective and high current density formate oxidation electrocatalyst

  • Han, Lijuan
  • González-Cobos, Jesús|||0000-0003-0885-5815
  • Sánchez-Molina, Irene
  • Giancola, Stefano
  • Folkman, Scott J.|||0000-0002-8124-7253
  • Tang, PengYi|||0000-0002-2306-095X
  • Heggen, Marc|||0000-0002-2646-0078
  • Dunin-Borkowski, Rafal E.|||0000-0001-8082-0647
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Giménez, Sixto|||0000-0002-4522-3174
  • Galán-Mascarós, José Ramón|||0000-0001-7983-9762
Herein we report the selectivity, stability, and electrochemical characterization of cobalt hexacyanoferrate, the Co-Fe Prussian Blue derivative (CoFePB), as a formate/formic acid oxidation electrocatalyst in aqueous media. CoFePB is able to quantitatively catalyze (100% Faradaic efficiency within less than 8% standard error at pH 5) the electrochemical oxidation of formate to CO2 over a pH range of 1-13. This quantitative formate elecrooxidation is possible due to the exclusive selectivity of the catalyst in a wide potential window (from ca. 1.2 to 1.7 V vs RHE), where no other substrate in aqueous conditions is activated: neither other organic molecules, such as alcohols or acids, nor water itself. CoFePB is one of the first heterogeneous noble-metal-free catalysts reported for the electrooxidation of small hydrocarbon molecules. Importantly, the catalyst showed a very high tolerance against surface poisoning during the reaction, as supported by the cyclic voltammetry and electrochemical impedance spectroscopy data, thereby allowing CoFePB to operate at greater current density than state-of-the-art noble metal catalysts. For example, we observed that CoFePB is able to achieve a formate oxidation current ∼10 mA cm-2 at pH 5, 0.4 M formate at 1.4 V vs RHE, whereas a Pt disk and Pd(5%)/C electrodes had currents of 0.4 and 1.4 mA cm-2, respectively, under identical conditions. The remarkable selectivity, stability, and high current density of CoFePB, in contrast to state-of-the-art catalysts based on platinum-group metals, is an important step in the search for inexpensive earth-abundant materials for oxidation of organic molecules for use in liquid fuel cells or for selective organic molecule sensors. Furthermore, because CoFePB is not poisoned by intermediates and can achieve higher current density than Pt or Pd, improvement of the catalyst onset potential can lead to higher power density formate oxidation fuel cells using earth-abundant metals than with Pt or Pd.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Phosphorous incorporation in Pd₂Sn alloys for electrocatalytic ethanol oxidation

  • Yu, Xiaoting|||0000-0003-0457-4047
  • Liu, Junfeng|||0000-0003-3164-6472
  • Li, Junshan|||0000-0002-1482-1972
  • Luo, Zhishan|||0000-0002-0801-9238
  • Zuo, Yong|||0000-0003-1564-467X
  • Xing, Congcong|||0000-0001-7674-6720
  • Llorca, Jordi|||0000-0002-7447-9582
  • Nasiou, Déspina
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Pan, Kai
  • Kleinhanns, Tobias
  • Xie, Ying
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Direct ethanol fuel cells (DEFCs) show a huge potential to power future electric vehicles and portable electronics, but their deployment is currently limited by the unavailability of proper electrocatalysis for the ethanol oxidation reaction (EOR). In this work, we engineer a new electrocatalyst by incorporating phosphorous into a palladium-tin alloy and demonstrate a significant performance improvement toward EOR. We first detail a synthetic method to produce Pd₂Sn:P nanocrystals that incorporate 35% of phosphorus. These nanoparticles are supported on carbon black and tested for EOR. Pd₂Sn:P/C catalysts exhibit mass current densities up to 5.03 A mg , well above those of Pd₂Sn/C, Pd₂P/C and Pd/C reference catalysts. Furthermore, a twofold lower Tafel slope and a much longer durability are revealed for the Pd₂Sn:P/C catalyst compared with Pd/C. The performance improvement is rationalized with the aid of density functional theory (DFT) calculations considering different phosphorous chemical environments. Depending on its oxidation state, surface phosphorus introduces sites with low energy OH adsorption and/or strongly influences the electronic structure of palladium and tin to facilitate the oxidation of the acetyl to acetic acid, which is considered the EOR rate limiting step. DFT calculations also points out that the durability improvement of Pd₂Sn:P/C catalyst is associated to the promotion of OH adsorption that accelerates the oxidation of intermediate poisoning CO, reactivating the catalyst surface.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A SnS2 molecular precursor for conformal nanostructured coatings

  • Zuo, Yong|||0000-0003-1564-467X
  • Li, Junshan|||0000-0002-1482-1972
  • Yu, Xiaoting|||0000-0003-0457-4047
  • Du, Ruifeng
  • Zhang, Ting|||0000-0002-0317-9662
  • Wang, Xiang
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
We present a simple, versatile, and scalable procedure to produce SnS nanostructured layers based on an amine/thiol-based molecular ink. The ratios amine/thiol and Sn/S, and the reaction conditions, are systematically investigated to produce phase-pure SnS planar and conformal layers with a tremella-like SnS morphology. Such nanostructured layers are characterized by excellent photocurrent densities. The same strategy can be used to produce SnS-graphene composites by simply introducing graphene oxide (GO) into the initial solution. Conveniently, the solvent mixture is able to simultaneously dissolve the Sn and Se powders and reduce the GO. Furthermore, SnSSe ternary coatings and phase-pure SnSe can be easily produced by simply incorporating proper amounts of Se into the initial ink formulation. Finally, the potential of this precursor ink to produce gram-scale amounts of unsupported SnS is investigated._.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Engineering the Interfacial Microenvironment via Surface Hydroxylation to Realize the Global Optimization of Electrochemical CO Reduction

  • Han, Xu|||0000-0001-8319-8830
  • Zhang, Ting
  • Biset-Peiró, Martí|||0000-0002-1255-7733
  • Zhang, Xuan|||0000-0002-3667-4280
  • Li, Jian
  • Tang, Weiqiang|||0000-0002-7726-4130
  • Tang, PengYi|||0000-0002-2306-095X
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
The adsorption and activation of CO on the electrode interface is a prerequisite and key step for electrocatalytic CO reduction reaction (eCO RR). Regulating the interfacial microenvironment to promote the adsorption and activation of CO is thus of great significance to optimize overall conversion efficiency. Herein, a CO-philic hydroxyl coordinated ZnO (ZnO-OH) catalyst is fabricated, for the first time, via a facile MOF-assisted method. In comparison to the commercial ZnO, the as-prepared ZnO-OH exhibits much higher selectivity toward CO at lower applied potential, reaching a Faradaic efficiency of 85% at -0.95 V versus RHE. To the best of our knowledge, such selectivity is one of the best records in ZnO-based catalysts reported till date. Density functional theory calculations reveal that the coordinated surficial -OH groups are not only favorable to interact with CO molecules but also function in synergy to decrease the energy barrier of the rate-determining step and maintain a higher charge density of potential active sites as well as inhibit undesired hydrogen evolution reaction. Our results indicate that engineering the interfacial microenvironment through the introduction of CO-philic groups is a promising way to achieve the global optimization of eCO RR via promoting adsorption and activation of CO.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

2D/2D heterojunction of TiO2 nanoparticles and ultrathin G-C3N4 nanosheets for efficient photocatalytic hydrogen evolution

  • Du, Ruifeng
  • Li, Baoying
  • Han, Xu|||0000-0001-8319-8830
  • Xiao, Ke
  • Wang, Xiang
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Photocatalytic hydrogen evolution is considered one of the promising routes to solve the energy and environmental crises. However, developing efficient and low-cost photocatalysts remains an unsolved challenge. In this work, ultrathin 2D g-CN nanosheets are coupled with flat TiO nanoparticles as face-to-face 2D/2D heterojunction photocatalysts through a simple electrostatic self-assembly method. Compared with g-CN and pure TiO nanosheets, 2D/2D TiO/g-CN heterojunctions exhibit effective charge separation and transport properties that translate into outstanding photocatalytic performances. With the optimized heterostructure composition, stable hydrogen evolution activities are threefold and fourfold higher than those of pure TiO and g-CN are consistently obtained. Benefiting from the favorable 2D/2D heterojunction structure, the TiO/g-CN photocatalyst yields H evolution rates up to 3875 μmol·g -1 ·h -1 with an AQE of 7.16% at 380 nm.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Site-specific axial oxygen coordinated FeN4 active sites for highly selective electroreduction of carbon dioxide

  • Zhang, Ting|||0000-0002-0317-9662
  • Han, Xu|||0000-0001-8319-8830
  • Liu, Hong|||0000-0003-3165-8764
  • Biset-Peiró, Martí|||0000-0002-1255-7733
  • Li, Jian|||0000-0003-3060-0501
  • Zhang, Xuan
  • Tang, Penguy
  • Yang, Bo|||0000-0001-6904-6646
  • Zheng, Lirong
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
Regulating the coordination environment via heteroatoms to break the symmetrical electronic structure of M-N active sites provides a promising route to engineer metal-nitrogen-carbon catalysts for electrochemical CO reduction reaction. However, it remains challenging to realize a site-specific introduction of heteroatoms at atomic level due to their energetically unstable nature. Here, this paper reports a facile route via using an oxygen- and nitrogen-rich metal-organic framework (MOF) (IRMOF-3) as the precursor to construct the Fe-O and Fe-N chelation, simultaneously, resulting in an atomically dispersed axial O-coordinated FeN active site. Compared to the FeN active sites without O coordination, the formed FeN-O sites exhibit much better catalytic performance toward CO, reaching a maximum FE of 95% at -0.50 V versus reversible hydrogen electrode. To the best of the authors' knowledge, such performance exceeds that of the existing Fe-N-C-based catalysts derived from sole N-rich MOFs. Density functional theory calculations indicate that the axial O-coordination regulates the binding energy of intermediates in the reaction pathways, resulting in a smoother desorption of CO and increased energy for the competitive hydrogen production.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Molecular engineering to introduce carbonyl between nickel salophen active sites to enhance electrochemical CO2 reduction to methanol

  • Liang, Zhifu
  • Wang, Jianghao
  • Tang, PengYi|||0000-0002-2306-095X
  • Tang, Weiqiang|||0000-0002-7726-4130
  • Liu, Lijia
  • Shakouri, Mohsen
  • Wang, Xiang
  • Llorca, Jordi|||0000-0002-7447-9582
  • Zhao, Shuangliang
  • Heggen, Marc|||0000-0002-2646-0078
  • Dunin-Borkowski, Rafal E.|||0000-0001-8082-0647
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Wu, Hao Bin
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
The electrochemical reduction of CO to methanol is a potentially cost-effective strategy to reduce the concentration of this greenhouse gas while at the same time producing a value-added chemical. Herein, we detail a highly efficient 2D nickel organic framework containing a large density of highly dispersed salophen NiNO active sites toward electrochemical CORR to methanol. By tuning the ligand environment of the salophen NiNO, the electrocatalytic activity of the material toward CO reduction can be significantly improved. We prove that by introducing a carbonyl group at the ligand environment of the Ni active sites, the electrochemical CO reduction activity is highly promoted and its product selectivity reaches a Faradaic efficiency of 27% toward the production of methanol at - 0.9 V vs RHE. The salophen-based π-d conjugated metal-organic framework presented here thus provides the best performance toward CO reduction to methanol among the previously developed nickel-based electrocatalysts.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Rational design of MXene/activated carbon/polyoxometalate triple hybrid electrodes with enhanced capacitance for organic-electrolyte supercapacitors

  • Zhu, Jun-Jie|||0000-0002-8024-099X
  • Hemesh, Avireddy
  • Jacas Biendicho, Jordi|||0000-0001-5981-6168
  • Martinez-Soria, Luis
  • Rueda García, Daniel|||0000-0003-3539-1585
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Ballesteros, Belén|||0000-0002-1958-8911
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
We report a triple hybrid electrode (MXene/activated carbon (AC)/polyoxometalates (POMs)) combining the merits of three materials: MXene (high volumetric capacitance), AC (high gravimetric capacitance) and Phosphotungstate (fast redox). Phosphotungstic acid (HPW12) and tetraethylammonium phosphotungstate (TEAPW12) were the two POMs used to prepare MXene/AC/POMs triple hybrids. MXene/AC/TEAPW12 outperformed MXene/AC/HPW12 in 1 M tetraethylammonium tetrafluoroborate (TEABF4)/acetonitrile. Nano-dispersion of POMs facilitates charge storage through surface capacitive processes (91% at 2 mV s). MXene/AC/TEAPW12 delivered significantly higher gravimetric capacitance (87F g at 1 mV s) than MXene (40F g at 1 mV s) in the same organic electrolyte, without sacrificing much volumetric capacitance (less than 10%). The gravimetric capacitance of the triple hybrid was similar to that of MXene/AC, whereas its volumetric capacitance was 1.5 times higher. Replacing TEA cations with 1-ethyl-3-methylimidazolium cations (EMIM), the capacitance improved by 21%. Coupled with AC positive electrodes in an asymmetric cell, MXene/AC/TEAPW12 delivered 4.6 times higher gravimetric energy density and 3.5 times higher volumetric energy density than a similar MXene asymmetric cell at relatively high-power densities. This study proves that MXene/AC/TEAPW12 combines the merits and compensates for the demerits of each component and is a promising electrode material for organic-electrolyte supercapacitors.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A novel π-d conjugated cobalt tetraaza[14]annulene based atomically dispersed electrocatalyst for efficient CO2 reduction

  • Liang, Zhifu
  • Zhang, Ting|||0000-0002-0317-9662
  • Cao, Pengfei
  • Yoshida, Takefumi
  • Tang, Weiqiang|||0000-0002-7726-4130
  • Wang, Xiang
  • Zuo, Yong|||0000-0003-1564-467X
  • Tang, PengYi|||0000-0002-2306-095X
  • Heggen, Marc|||0000-0002-2646-0078
  • Dunin-Borkowski, Rafal E.|||0000-0001-8082-0647
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Yamashita, Masahiro
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
Tetraaza[14]annulenes (TAA) are synthetic macrocycles which are analogue to porphyrins. However, there are almost no reports about the synthesis of polymers based on TAA and neither on their use as electrocatalysts. The study of new catalysts to promote an efficient electrochemical conversion of carbon dioxide to valuable chemicals is a promising approach to relieve the pressure of carbon emissions and realize the carbon cycle. Herein, we first report the synthesis of a novel tetraaza[14]annulene (TAA) based organic polymeric metal complex (PMC) by a non-template method. This PMC is used as ligand to construct a π-d conjugated cobalt coordination polymer (Poly-TAA-Co) with CoN structure which is supported on multi-wall carbon nanotubes (CNTs) to work as an atomically dispersed efficient electrocatalyst for the CO reduction reaction (CORR). The resulting catalyst (Poly-TAA-Co-CNT) exhibits excellent performance, with a 90% CO faradaic efficiency, a low overpotential (390 mV) and good stability in 0.5 M KHCO aqueous solution. Density functional theory calculations confirmed that the cobalt tetra[14]annulene is an excellent active site for electrocatalytic CORR. This work not only inspires the design of novel TAA based macromolecules, but also paves the way to the development and application of new molecular-based catalysts for electrocatalytic CORR.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Molecular engineering to tune the ligand environment of atomically dispersed nickel for efficient alcohol electrochemical oxidation

  • Liang, Zhifu
  • Jiang, Daochuan
  • Wang, Xiang
  • Shakouri, Mohsen
  • Zhang, Ting|||0000-0002-0317-9662
  • Li, Zhongjun
  • Tang, PengYi|||0000-0002-2306-095X
  • Llorca, Jordi|||0000-0002-7447-9582
  • Liu, Lijia
  • Yuan, Yupeng
  • Heggen, Marc|||0000-0002-2646-0078
  • Dunin-Borkowski, Rafal E.|||0000-0001-8082-0647
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
Atomically dispersed metals maximize the number of catalytic sites and enhance their activity. However, their challenging synthesis and characterization strongly complicates their optimization. Here, the aim is to demonstrate that tuning the electronic environment of atomically dispersed metal catalysts through the modification of their edge coordination is an effective strategy to maximize their performance. This article focuses on optimizing nickel-based electrocatalysts toward alcohol electrooxidation in alkaline solution. A new organic framework with atomically dispersed nickel is first developed. The coordination environment of nickel within this framework is modified through the addition of carbonyl (CO) groups. The authors then demonstrate that such nickel-based organic frameworks, combined with carbon nanotubes, exhibit outstanding catalytic activity and durability toward the oxidation of methanol (CHOH), ethanol (CHCHOH), and benzyl alcohol (CHCHOH); the smaller molecule exhibits higher catalytic performance. These outstanding electrocatalytic activities for alcohol electrooxidation are attributed to the presence of the carbonyl group in the ligand chemical environment, which enhances the adsorption for alcohol, as revealed by density functional theory calculations. The work not only introduces a new atomically dispersed Ni-based catalyst, but also demonstrates a new strategy for designing and engineering high-performance catalysts through the tuning of their chemical environment.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Effects of solar irradiation on thermally driven CO2 methanation using Ni/CeO2-based catalyst

  • Golovanova, Viktoria|||0000-0002-4008-0733
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Golovanov, Viacheslav
  • Rantala Tapio, T.
  • Andreu, Teresa|||0000-0002-2804-4545
  • Morante, Joan Ramon|||0000-0002-4981-4633
Utilization of the renewable energy sources is one of the main challenges in the state-of-the-art technologies for CO recycling. Here we have taken advantage of the solar light harvesting in the thermocatalytic approach to carbon dioxide methanation. The large-surface-area Ni/CeO catalyst produced by a scalable low-cost method was characterized and tested in the dark and under solar light irradiation conditions. Light-assisted CO conversion experiments as well as in-situ DRIFT spectrometry, performed at different illumination intensities, have revealed a dual effect of the incident photons on the catalytic properties of the two-component Ni/CeO catalyst. On the one hand, absorbed photons induce a localized surface plasmon resonance in the Ni nanoparticles followed by dissipation of the heat to the oxide matrix. On the other hand, the illumination activates the photocatalytic properties of the CeO support, which leads to an increase in the concentration of the intermediates being precursor for methane production. Analysis of the methane production at different temperatures and illumination conditions has shown that the methanation reaction in our case is controlled by a photothermally-activated process. The used approach has allowed us to increase the reaction rate up to 2.4 times and consequently to decrease the power consumption by 20 % under solar illumination, thus replacing the conventional thermal activation of the reaction with a green energy source.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Controlled oxygen doping in highly dispersed Ni-loaded g-C3N4 nanotubes for efficient photocatalytic H2O2 production

  • Du, Ruifeng
  • Xiao, Ke
  • Li, Baoying
  • Han, Xu|||0000-0001-8319-8830
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Wang, Xiang
  • Zuo, Yong|||0000-0003-1564-467X
  • Guardia, Pablo|||0000-0001-9076-4642
  • Li, Junshan|||0000-0002-1482-1972
  • Chen, Jianbin|||0000-0003-1104-7237
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Hydrogen peroxide (HO) is both a key component in several industrial processes and a promising liquid fuel. The production of HO by solar photocatalysis is a suitable strategy to convert and store solar energy into chemical energy. Here we report an oxygen-doped tubular g-CN with uniformly dispersed nickel nanoparticles for efficient photocatalytic HO generation. The hollow structure of the tubular g-CN provides a large surface with a high density of reactive sites and efficient visible light absorption during the photocatalytic reaction. The oxygen doping and Ni loading enable a fast separation of photogenerated charge carriers and a high selectivity toward the two-electron process during the oxygen reduction reaction (ORR). The optimized composition, Ni/OtCN, displays an HO production rate of 2464 μmol g·h, which is eightfold higher than that of bulk g-CN under visible light irradiation (λ.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Unveiling the role of counter-anions in amorphous transition metal-based oxygen evolution electrocatalysts

  • Wang, Xiang
  • Han, Xu|||0000-0001-8319-8830
  • Du, Ruifeng
  • Liang, Zhifu
  • Zuo, Yong|||0000-0003-1564-467X
  • Guardia, Pablo|||0000-0001-9076-4642
  • Li, Junshan|||0000-0002-1482-1972
  • Llorca, Jordi|||0000-0002-7447-9582
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Zheng, Renji
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
At the initial stage of the oxygen evolution reaction (OER) most electrocatalysts undergo structural and chemical surface reconstruction. While this reconstruction strongly influences their performance, it is frequently overlooked. Herein, we analyze the role of the oxidized anions, which is particularly neglected in most previous works. We introduce a range of different anionic groups (Cl, CHCOO, NO , SO ) on the surface of an amorphous ZnCoNiO catalyst by a facile proton etching and ion exchange method from a ZIF-8 self-sacrificial template. The structural and chemical properties of the obtained set of materials are thoroughly analysed and correlated with their electrocatalytic performance to study the effect of surface anionic groups, phase transition, metal leaching and defect generation on OER activity. Exploiting the control possibilities provided by the synthesis method here described and employing the uncovered property-performance correlations, the electrocatalyst is optimized. As a result, we produce ZnCoNiO-SO catalysts with outstanding OER performances, including a low overpotential of 252 mV at 10 mA cm with a small Tafel slope of 41.6 mV dec. Furthermore, this catalyst exhibits remarkable stability with negligible overpotential variation for 100 h. The excellent catalytic properties are rationalized using density functional theory calculations, showing that the surface-adsorbed anions, particularly SO , can stabilize the OOH* intermediate, thus enhancing the OER activity. This work offers new insight into the roles of metal leaching and surface-adsorbed anions in the OER progress and facilitates the rational design of highly-efficient electrocatalysts for OER.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Facing seawater splitting challenges by regeneration with Ni-Mo-Fe bifunctional electrocatalyst for hydrogen and oxygen evolution

  • Ros, Carles|||0000-0002-9148-2767
  • Murcia López, Sebastián|||0000-0002-3703-041X
  • Garcia, Xènia|||0000-0003-0795-4168
  • Rosado, Marcos|||0000-0003-3938-9132
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Morante, Joan Ramon|||0000-0002-4981-4633
Hydrogen, produced by water splitting, has been proposed as one of the main green energy vectors of the future if produced from renewable energy sources. However, to substitute fossil fuels, large amounts of pure water are necessary, scarce in many world regions. In this work, we fabricate efficient and earth-abundant electrodes, study the challenges of using real seawater, and propose an electrode regeneration method to face undesired salt deposition. Ni-Mo-Fe trimetallic electrocatalyst is deposited on non-expensive graphitic carbon felts both for hydrogen (HER) and oxygen evolution reactions (OER) in seawater and alkaline seawater. Cl pitting and the chlorine oxidation reaction are suppressed on these substrates and alkalinized electrolyte. Precipitations on the electrodes, mainly CaCO, originating from seawater-dissolved components have been studied, and a simple regeneration technique is proposed to rapidly dissolve undesired deposited CaCO in acidified seawater. Under alkaline conditions, Ni-Mo-Fe-based catalyst is found to reconfigure, under cathodic bias, into Ni-Mo-Fe alloy with a cubic crystalline structure and Ni : Fe(OH) redeposits whereas, under anodic bias, it is transformed into a follicular Ni:FeOOH structure. High productivities over 300 mA cm and voltages down to 1.59 V@10 mA cm for the overall water splitting reaction have been shown, and electrodes are found stable for over 24 h without decay in alkaline seawater conditions and with energy efficiency higher than 61.5 % which makes seawater splitting promising and economically feasible.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Temperature-controlled switchable photochromism in solid materials

  • Julià López, Àlex|||0000-0002-3357-8349
  • Hernando, Jordi|||0000-0002-1126-4138
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
  • Gonzalez Monje, Pablo|||0000-0001-8781-8574
  • Sedó Vegara, Josep|||0000-0002-4195-7541
  • Roscini, Claudio|||0000-0002-0157-8934
A novel strategy to achieve thermally switchable photochromism in solid materials is reported, which relies on the preparation of polymeric core-shell capsules containing solutions of photochromic dyes in acidic phase-change materials. Upon changing the phase (solid or liquid) of the encapsulated medium, one of the two photochromic states of the system is selectively stabilized on demand, allowing for reversible interconversion between direct and reverse photochromism when thermally scanning through the melting temperature of the phase-change material. This strategy, which does not require the addition of external agents or chemical modification of the dyes, proved to be general for different spiropyran photochromes and to be applicable to the fabrication of a variety of functional materials by simply embedding the capsules obtained into a solid matrix of choice.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Tubular CoFeP@CN as a Mott-Schottky catalyst with multiple adsorption sites for robust lithium-sulfur batteries

  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Du, Ruifeng
  • Jacas Biendicho, Jordi|||0000-0001-5981-6168
  • Yi, Mingjie
  • Xiao, Ke
  • Yang, Dawei|||0000-0002-3842-8286
  • Zhang, Ting|||0000-0002-0317-9662
  • Wang, Xiang
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Zhou, Yingtang|||0000-0002-8678-295X
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The shuttle effect and the sluggish reaction kinetics of lithium polysulfide (LiPS) seriously compromise the performance of lithium-sulfur batteries (LSBs). To overcome these limitations and enable the fabrication of robust LSBs, here the use of a Mott-Schottky catalyst based on bimetallic phosphide CoFeP nanocrystals supported on carbon nitride tubular nanostructures as sulfur hosts is proposed. Theoretical calculations and experimental data confirm that CoFeP@CN composites are characterized by a suitable electronic structure and charge rearrangement that allows them to act as a Mott-Schottky catalyst to accelerate LiPS conversion. In addition, the tubular geometry of CoFeP@CN composites facilitates the diffusion of Li ions, accommodates volume change during the reaction, and offers abundant lithiophilic/sulfiphilic sites to effectively trap soluble LiPS. Therefore, S@CoFeP@CN electrodes deliver a superior rate performance of 630 mAh g at 5 C, and remarkable cycling stability with 90.44% capacity retention over 700 cycles. Coin cells with high sulfur loading, 4.1 mg cm, and pouch cells with 0.1 Ah capacities are further produced to validate their superior cycling stability. In addition, it is demonstrated here that CoFeP@CN hosts greatly alleviate the often overlooked issues of low energy efficiency and serious self-discharging in LSBs.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A High conductivity 1D π-d conjugated metal-organic framework with efficient polysulfide trapping-diffusion-catalysis in lithium-sulfur batteries, A High conductivity one-dimensional π-d conjugated metal-organic framework with efficient polysulfide trapping-diffusion-catalysis in lithium-sulfur batteries

  • Yang, Dawei|||0000-0002-3842-8286
  • Liang, Zhifu
  • Tang, PengYi|||0000-0002-2306-095X
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Tang, Mingxue|||0000-0002-7282-4100
  • Li, Qizhen
  • Jacas Biendicho, Jordi|||0000-0001-5981-6168
  • Li, Junshan|||0000-0002-1482-1972
  • Heggen, Marc|||0000-0002-2646-0078
  • Dunin-Borkowski, Rafal E.|||0000-0001-8082-0647
  • Xu, Ming
  • Llorca, Jordi|||0000-0002-7447-9582
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Chou, Shulei|||0000-0003-1155-6082
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The shuttling behavior and sluggish conversion kinetics of the intermediate lithium polysulfides (LiPS) represent the main obstructions to the practical application of lithium-sulfur batteries (LSBs). Herein, a 1D π-d conjugated metal-organic framework (MOF), Ni-MOF-1D, is presented as an efficient sulfur host to overcome these limitations. Experimental results and density functional theory calculations demonstrate that Ni-MOF-1D is characterized by a remarkable binding strength for trapping soluble LiPS species. Ni-MOF-1D also acts as an effective catalyst for S reduction during the discharge process and LiS oxidation during the charging process. In addition, the delocalization of electrons in the π-d system of Ni-MOF-1D provides a superior electrical conductivity to improve electron transfer. Thus, cathodes based on Ni-MOF-1D enable LSBs with excellent performance, for example, impressive cycling stability with over 82% capacity retention over 1000 cycles at 3 C, superior rate performance of 575 mAh g at 8 C, and a high areal capacity of 6.63 mAh cm under raised sulfur loading of 6.7 mg cm. The strategies and advantages here demonstrated can be extended to a broader range of π-d conjugated MOFs materials, which the authors believe have a high potential as sulfur hosts in LSBs.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Atomically dispersed Fe in a C2N based catalyst as a sulfur host for efficient lithium-sulfur batteries

  • Liang, Zhifu
  • Yang, Dawei|||0000-0002-3842-8286
  • Tang, PengYi|||0000-0002-2306-095X
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Jacas Biendicho, Jordi|||0000-0001-5981-6168
  • Zhang, Yi
  • Llorca, Jordi|||0000-0002-7447-9582
  • Wang, Xiang
  • Li, Junshan|||0000-0002-1482-1972
  • Heggen, Marc|||0000-0002-2646-0078
  • David, Jérémy|||0000-0003-3219-149X
  • Dunin-Borkowski, Rafal E.|||0000-0001-8082-0647
  • Zhou, Yingtang|||0000-0002-8678-295X
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
Lithium-sulfur batteries (LSBs) are considered to be one of the most promising next generation energy storage systems due to their high energy density and low material cost. However, there are still some challenges for the commercialization of LSBs, such as the sluggish redox reaction kinetics and the shuttle effect of lithium polysulfides (LiPS). Here a 2D layered organic material, CN, loaded with atomically dispersed iron as an effective sulfur host in LSBs is reported. X-ray absorption fine spectroscopy and density functional theory calculations prove the structure of the atomically dispersed Fe/CN catalyst. As a result, Fe/CN-based cathodes demonstrate significantly improved rate performance and long-term cycling stability. Fe/CN-based cathodes display initial capacities up to 1540 mAh g at 0.1 C and 678.7 mAh g at 5 C, while retaining 496.5 mAh g after 2600 cycles at 3 C with a decay rate as low as 0.013% per cycle. Even at a high sulfur loading of 3 mg cm, they deliver remarkable specific capacity retention of 587 mAh g after 500 cycles at 1 C. This work provides a rational structural design strategy for the development of high-performance cathodes based on atomically dispersed catalysts for LSBs.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Influence of copper telluride nanodomains on the transport properties of n-type bismuth telluride

  • Zhang, Yu|||0000-0002-0332-0013
  • Xing, Congcong|||0000-0001-7674-6720
  • Liu, Yu|||0000-0001-7313-6740
  • Li, Mengyao|||0000-0002-9082-7938
  • Xiao, Ke
  • Guardia, Pablo|||0000-0001-9076-4642
  • Lee, Seungho|||0000-0002-6962-8598
  • Han, Xu|||0000-0001-8319-8830
  • Moghaddam, Ahmad Ostovari
  • Roa, Joan Josep|||0000-0002-7440-0766
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Pan, Kai
  • Prato, Mirko|||0000-0002-2188-8059
  • Xie, Ying
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The high processing cost, poor mechanical properties and moderate performance of BiTe-based alloys used in thermoelectric devices limit the cost-effectiveness of this energy conversion technology. Towards solving these current challenges, in the present work, we detail a low temperature solution-based approach to produce BiTe-CuTe nanocomposites with improved thermoelectric performance. Our approach consists in combining proper ratios of colloidal nanoparticles and to consolidate the resulting mixture into nanocomposites using a hot press. The transport properties of the nanocomposites are characterized and compared with those of pure BiTe nanomaterials obtained following the same procedure. In contrast with most previous works, the presence of CuTe nanodomains does not result in a significant reduction of the lattice thermal conductivity of the reference BiTe nanomaterial, which is already very low. However, the introduction of CuTe yields a nearly threefold increase of the power factor associated to a simultaneous increase of the Seebeck coefficient and electrical conductivity at temperatures above 400 K. Taking into account the band alignment of the two materials, we rationalize this increase by considering that CuTe nanostructures, with a relatively low electron affinity, are able to inject electrons into BiTe, enhancing in this way its electrical conductivity. The simultaneous increase of the Seebeck coefficient is related to the energy filtering of charge carriers at energy barriers within BiTe domains associated with the accumulation of electrons in regions nearby a CuTe/BiTe heterojunction. Overall, with the incorporation of a proper amount of CuTe nanoparticles, we demonstrate a 250% improvement of the thermoelectric figure of merit of Bi2Te3.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

NbSe2 meets C2N, a 2D-2D heterostructure catalysts as multifunctional polysulfide mediator in ultra-long-life lithium-sulfur batteries

  • Yang, Dawei|||0000-0002-3842-8286
  • Liang, Zhifu
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Jacas Biendicho, Jordi|||0000-0001-5981-6168
  • Botifoll, Marc|||0000-0002-4876-6393
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Chen, Qiulin
  • Li, Mengyao|||0000-0002-9082-7938
  • Ramon, Alberto
  • Moghaddam, Ahmad Ostovari
  • Llorca, Jordi|||0000-0002-7447-9582
  • Wang, Jiaao|||0000-0002-4944-4951
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Chou, Shulei|||0000-0003-1155-6082
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The shuttle effect and sluggish conversion kinetics of lithium polysulfides (LiPS) hamper the practical application of lithium-sulfur batteries (LSBs). Toward overcoming these limitations, herein an in situ grown CN@NbSe heterostructure is presented with remarkable specific surface area, as a Li-S catalyst and LiPS absorber. Density functional theory (DFT) calculations and experimental results comprehensively demonstrate that CN@NbSe is characterized by a suitable electronic structure and charge rearrangement that strongly accelerates the LiPS electrocatalytic conversion. In addition, heterostructured CN@NbSe strongly interacts with LiPS species, confining them at the cathode. As a result, LSBs cathodes based on CN@NbSe/S exhibit a high initial capacity of 1545 mAh g at 0.1 C. Even more excitingly, CN@NbSe/S cathodes are characterized by impressive cycling stability with only 0.012% capacity decay per cycle after 2000 cycles at 3 C. Even at a sulfur loading of 5.6 mg cm, a high areal capacity of 5.65 mAh cm is delivered. These results demonstrate that CN@NbSe heterostructures can act as multifunctional polysulfide mediators to chemically adsorb LiPS, accelerate Li-ion diffusion, chemically catalyze LiPS conversion, and lower the energy barrier for LiS precipitation/decomposition, realizing the "adsorption-diffusion-conversion" of polysulfides.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

ZnSe/N-doped carbon nanoreactor with multiple adsorption sites for stable lithium-sulfur batteries

  • Yang, Dawei|||0000-0002-3842-8286
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Jacas Biendicho, Jordi|||0000-0001-5981-6168
  • Han, Xu|||0000-0001-8319-8830
  • Liang, Zhifu
  • Du, Ruifeng
  • Li, Mengyao|||0000-0002-9082-7938
  • Li, Junshan|||0000-0002-1482-1972
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Zhou, Yingtang|||0000-0002-8678-295X
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
To commercially realize the enormous potential of lithium-sulfur batteries (LSBs) several challenges remain to be overcome. At the cathode, the lithium polysulfide (LiPS) shuttle effect must be inhibited and the redox reaction kinetics need to be substantially promoted. In this direction, this work proposes a cathode material based on a transition-metal selenide (TMSe) as both adsorber and catalyst and a hollow nanoreactor architecture: ZnSe/N-doped hollow carbon (ZnSe/NHC). It is here demonstrated both experimentally and by means of density functional theory that this composite provides three key benefits to the LSBs cathode: (i) A highly effective trapping of LiPS due to the combination of sulfiphilic sites of ZnSe, lithiophilic sites of NHC, and the confinement effect of the cage-based structure; (ii) a redox kinetic improvement in part associated with the multiple adsorption sites that facilitate the Li diffusion; and (iii) an easier accommodation of the volume expansion preventing the cathode damage due to the hollow design. As a result, LSB cathodes based on S@ZnSe/NHC are characterized by high initial capacities, superior rate capability, and an excellent stability. Overall, this work not only demonstrates the large potential of TMSe as cathode materials in LSBs but also probes the nanoreactor design to be a highly suitable architecture to enhance cycle stability.