Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 24
Encontrada(s) 1 página(s)

Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Multiscale spatial analysis of two plant–insect interactions: effects of landscape, resource distribution, and other insects

  • Pocull, Guillem
  • Baskett, Carina
  • Barton, Nicholas H.
Context Biotic resource exploitation is a critical determinant of species’ distributions. However, quantifying resource exploitation patterns through space and time can be difficult, complicating their incorporation in spatial ecology studies. Therefore, understanding the local drivers of spatial patterns of resource exploitation may contribute to better large-scale species distribution models. Objectives We investigated (1) how the resource exploitation patterns of two trophic interactions (plant–insect) are explained by insect behaviour, resource aggregation, and potential insect-insect interactions. We also analyzed how (2) resource patch size and (3) resource accessibility in a heterogeneous landscape affected host exploitation patterns. Methods We quantified nectar robbing by insects in the genus Bombus (bumblebees) and seed predation by Brachypterolus vestitus larvae (Antirrhinum beetle) on Antirrhinum majus L. (wild snapdragons) in the Pyrenees Mountains, Catalonia, Spain. We tested hypotheses about resource exploitation by integrating spatial analyses at multiple scales. Results Both trophic interactions were aggregated, explained by the aggregation of their resource. At some scales, nectar robbing is more aggregated than the resource. Trophic interaction abundance is proportional to resource patch size, following the ideal free distribution model. Landscape features do not explain the locations exploited. Nectar robbing and seed predation occur together more often than expected. Conclusions Our findings suggest that multiple biotic and ecological spatial factors may simultaneously affect resource exploitation at a local scale. These findings should be considered when developing agricultural projects, management plans and conservation policies., Open access funding provided by Institute of Science and Technology (IST Austria). CB received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie Grant Agreement No. 754411. NB was funded by the FWF grant “Löwenmaul speciation” P 32166-B32.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ligand-mediated band engineering in bottom-up assembled SnTe nanocomposites for thermoelectric energy conversion

  • Ibáñez, María
  • Hasler, Roger
  • Genç, Aziz
  • Liu, Yu
  • Kuster, Beatrice
  • Scguster, Maximilian
  • Dobrozhan, Oleksandr
  • Cadavid, Doris
  • Arbiol, Jordi
  • Cabot, Andreu
  • Kovalenko, Maksym V.
The bottom-up assembly of colloidal nanocrystals is a versatile methodology to produce composite nanomaterials with precisely tuned electronic properties. Beyond the synthetic control over crystal domain size, shape, crystal phase, and composition, solution-processed nanocrystals allow exquisite surface engineering. This provides additional means to modulate the nanomaterial characteristics and particularly its electronic transport properties. For instance, inorganic surface ligands can be used to tune the type and concentration of majority carriers or to modify the electronic band structure. Herein, we report the thermoelectric properties of SnTe nanocomposites obtained from the consolidation of surface-engineered SnTe nanocrystals into macroscopic pellets. A CdSe-based ligand is selected to (i) converge the light and heavy bands through partial Cd alloying and (ii) generate CdSe nanoinclusions as a secondary phase within the SnTe matrix, thereby reducing the thermal conductivity. These SnTe-CdSe nanocomposites possess thermoelectric figures of merit of up to 1.3 at 850 K, which is, to the best of our knowledge, the highest thermoelectric figure of merit reported for solution-processed SnTe., This work was financially supported by the European Union (EU) via FP7 ERC Starting Grant 2012 (Project NANOSOLID, GA No. 306733). M.I. was supported by IST Austria, and by ETH Zurich via ETH career seed grant (SEED-18 16-2). Y.L. acknowledges funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 754411. IREC acknowledges funding from Generalitat de Catalunya (2014SGR1638). J.A. acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO coordinated projects between IREC and ICN2 ENE2017-85087-C3. ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tuning transport properties in thermoelectric nanocomposites through inorganic ligands and heterostructured building blocks

  • Ibáñez, María
  • Genç, Aziz
  • Hasler, Roger
  • Liu, Yu
  • Dobrozhan, Oleksandr
  • Nazarenko, Olga
  • Mata, Maria de la
  • Arbiol, Jordi
  • Cabot, Andreu
  • Kovalenko, Maksym V.
Methodologies that involve the use of nanoparticles as “artificial atoms” to rationally build materials in a bottom-up fashion are particularly well-suited to control the matter at the nanoscale. Colloidal synthetic routes allow for an exquisite control over such “artificial atoms” in terms of size, shape, and crystal phase as well as core and surface compositions. We present here a bottom-up approach to produce Pb–Ag–K–S–Te nanocomposites, which is a highly promising system for thermoelectric energy conversion. First, we developed a high-yield and scalable colloidal synthesis route to uniform lead sulfide (PbS) nanorods, whose tips are made of silver sulfide (Ag2S). We then took advantage of the large surface-to-volume ratio to introduce a p-type dopant (K) by replacing native organic ligands with K2Te. Upon thermal consolidation, K2Te-surface modified PbS–Ag2S nanorods yield p-type doped nanocomposites with PbTe and PbS as major phases and Ag2S and Ag2Te as embedded nanoinclusions. Thermoelectric characterization of such consolidated nanosolids showed a high thermoelectric figure-of-merit of 1 at 620 K., This work was financially supported by the European Union (EU) via FP7 ERC Starting Grant 2012 (Project NANOSOLID, GA No. 306733). M.I. was supported by IST Austria and by ETH Zurich via an ETH career seed grant (SEED-18 16-2). Y.L. acknowledges funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie Grant Agreement No. 754411. IREC receives funding from Generalitat de Catalunya (2014SGR1638). ICN2 acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO project ENE2017-85087-C3. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Bismuth telluride–copper telluride nanocomposites from heterostructured building blocks

  • Zhang, Yu
  • Liu, Yu
  • Calcabrini, Mariano
  • Xing, Congcong
  • Han, Xu
  • Arbiol, Jordi
  • Cadavid, Doris
  • Ibáñez, María
  • Cabot, Andreu
Appropriately designed nanocomposites allow improving the thermoelectric performance by several mechanisms, including phonon scattering, modulation doping and energy filtering, while additionally promoting better mechanical properties than those of crystalline materials. Here, a strategy for producing Bi2Te3–Cu2−xTe nanocomposites based on the consolidation of heterostructured nanoparticles is described and the thermoelectric properties of the obtained materials are investigated. We first detail a two-step solution-based process to produce Bi2Te3–Cu2−xTe heteronanostructures, based on the growth of Cu2−xTe nanocrystals on the surface of Bi2Te3 nanowires. We characterize the structural and chemical properties of the synthesized nanostructures and of the nanocomposites produced by hot-pressing the particles at moderate temperatures. Besides, the transport properties of the nanocomposites are investigated as a function of the amount of Cu introduced. Overall, the presence of Cu decreases the material thermal conductivity through promotion of phonon scattering, modulates the charge carrier concentration through electron spillover, and increases the Seebeck coefficient through filtering of charge carriers at energy barriers. These effects result in an improvement of over 50% of the thermoelectric figure of merit of Bi2Te3., This work was supported by the European Regional Development Funds and by the Spanish Ministerio de Economía y Competitividad through the project SEHTOP (ENE2016-77798-C4-3-R). Y. Z. and X. H., thank the China Scholarship Council for scholarship support. M. C. has received funding from the European Union's Horizon 2020 Research and Innovation programme under the Marie Skłodowska-Curie Grant Agreement No. 665385. M. I. acknowledges financial support from IST Austria. Y. L. acknowledges funding from the European Union's Horizon 2020 Research and Innovation Programme under the Marie Sklodowska-Curie grant agreement no. 754411. ICN2 acknowledges funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO project ENE2017-85087-C3. ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (grant no. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tin selenide molecular precursor for the solution processing of thermoelectric materials and devices

  • Zhang, Yu
  • Xing, Congcong
  • Zhang, Ting
  • Li, Mengyao
  • Pacios, Merce
  • Yu, Xiaoting
  • Arbiol, Jordi
  • Llorca, Jordi
  • Cadavid, Doris
  • Ibáñez, María
  • Cabot, Andreu
In the present work, we report a solution-based strategy to produce crystallographically textured SnSe bulk nanomaterials and printed layers with optimized thermoelectric performance in the direction normal to the substrate. Our strategy is based on the formulation of a molecular precursor that can be continuously decomposed to produce a SnSe powder or printed into predefined patterns. The precursor formulation and decomposition conditions are optimized to produce pure phase 2D SnSe nanoplates. The printed layer and the bulk material obtained after hot press displays a clear preferential orientation of the crystallographic domains, resulting in an ultralow thermal conductivity of 0.55 W m–1 K–1 in the direction normal to the substrate. Such textured nanomaterials present highly anisotropic properties with the best thermoelectric performance in plane, i.e., in the directions parallel to the substrate, which coincide with the crystallographic bc plane of SnSe. This is an unfortunate characteristic because thermoelectric devices are designed to create/harvest temperature gradients in the direction normal to the substrate. We further demonstrate that this limitation can be overcome with the introduction of small amounts of tellurium in the precursor. The presence of tellurium allows one to reduce the band gap and increase both the charge carrier concentration and the mobility, especially the cross plane, with a minimal decrease of the Seebeck coefficient. These effects translate into record out of plane ZT values at 800 K., M.I. acknowledges financial support from IST Austria. Y.L. acknowledges funding from the European Union’s Horizon 2020 Research and Innovation Programme under the Marie Sklodowska-Curie grant agreement no. 754411. J.L. is a Serra Húnter Fellow and is grateful to ICREA Academia program and projects MICINN/FEDER RTI2018-093996-B-C31 and GC 2017 SGR 128. This work was supported by the European Regional Development Funds and by the Spanish Ministerio de Economía y Competitividad through the project SEHTOP (ENE2016-77798-C4-3-R). Y.Z., C.X., M.L., X.Y., and T.Z. thank the China Scholarship Council for scholarship support. ICN2 acknowledges funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO project ENE2017-85087-C3. ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (grant no. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Doping-mediated stabilization of copper vacancies to promote thermoelectric properties of Cu2−xS

  • Zhang, Yu
  • Xing, Congcong
  • Liu, Yu
  • Spadaro, Maria Chiara
  • Wang, Xiang
  • Li, Mengyao
  • Xiao, Ke
  • Zhang, Ting
  • Guardia, Pablo
  • Lim, Khak Ho
  • Ostovari Moghaddam, Ahmad
  • Llorca, Javier
  • Arbiol, Jordi
  • Ibáñez, María
  • Cabot, Andreu
Copper chalcogenides are outstanding thermoelectric materials for applications in the medium-high temperature range. Among different chalcogenides, while CuSe is characterized by higher thermoelectric figures of merit, CuS provides advantages in terms of low cost and element abundance. In the present work, we investigate the effect of different dopants to enhance the CuS performance and also its thermal stability. Among the tested options, Pb-doped CuS shows the highest improvement in stability against sulfur volatilization. Additionally, Pb incorporation allows tuning charge carrier concentration, which enables a significant improvement of the power factor. We demonstrate here that the introduction of an optimal additive amount of just 0.3% results in a threefold increase of the power factor in the middle-temperature range (500–800 K) and a record dimensionless thermoelectric figure of merit above 2 at 880 K., This work was supported by the European Regional Development Fund and by the Spanish Ministerio de Economía y Competitividad through the project SEHTOP (ENE2016-77798-C4-3-R). MI acknowledges financial support from IST Austria. YL acknowledges funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No. 754411. YZ, CX, XW, KX and TZ thank the China Scholarship Council for the scholarship support. ICN2 acknowledges funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO project ENE2017-85087-C3. ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (grant no. SEV-2017-0706) and is funded by the CERCA program/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science Ph.D. program. M.C.S. has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 754510 (PROBIST) and the Severo Ochoa programme. P.G. acknowledges financial support from the Spanish government (MICIU) through the RTI2018-102006-J-I00 project and the Catalan Agency of Competitiveness (ACCIO) through the TecnioSpring+ Marie Sklodowska-Curie action TECSPR16-1-0082. YZ and CX contributed equally to this work.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enhanced thermoelectric performance of n-type bi2se3 nanosheets through sn doping

  • Li, Mengyao
  • Zhang, Yu
  • Zhang, Ting
  • Zuo, Yong
  • Xiao, Ke
  • Arbiol, Jordi
  • Llorca, Jordi
  • Liu, Yu
  • Cabot, Andreu
The cost-effective conversion of low-grade heat into electricity using thermoelectric devices requires developing alternative materials and material processing technologies able to reduce the currently high device manufacturing costs. In this direction, thermoelectric materials that do not rely on rare or toxic elements such as tellurium or lead need to be produced using high-throughput technologies not involving high temperatures and long processes. BiSe is an obvious possible Tefree alternative to BiTe for ambient temperature thermoelectric applications, but its performance is still low for practical applications, and additional efforts toward finding proper dopants are required. Here, we report a scalable method to produce BiSe nanosheets at low synthesis temperatures. We studied the influence of different dopants on the thermoelectric properties of this material. Among the elements tested, we demonstrated that Sn doping resulted in the best performance. Sn incorporation resulted in a significant improvement to the BiSe Seebeck coefficient and a reduction in the thermal conductivity in the direction of the hot-press axis, resulting in an overall 60% improvement in the thermoelectric figure of merit of BiSe ., M.L., Y.Z., T.Z. and K.X. thank the China Scholarship Council for their scholarship support. Y.L. acknowledges funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No. 754411. J.L. thanks the ICREA Academia program and projects MICINN/FEDER RTI2018-093996-B-C31 and G.C. 2017 SGR 128. ICN2 acknowledges funding from the Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO ENE2017-85087-C3.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Influence of copper telluride nanodomains on the transport properties of n-type bismuth telluride

  • Zhang, Yu
  • Xing, Congcong
  • Liu, Yu
  • Li, Mengyao
  • Xiao, Ke
  • Guardia, Pablo
  • Lee, Seung-Ho
  • Han, Xu
  • Ostovari Moghaddam, Ahmad
  • Roa, J. J.
  • Arbiol, Jordi
  • Ibáñez, María
  • Pan, Kai
  • Prato, Mirko
  • Xie, Ying
  • Cabot, Andreu
The high processing cost, poor mechanical properties and moderate performance of BiTe–based alloys used in thermoelectric devices limit the cost-effectiveness of this energy conversion technology. Towards solving these current challenges, in the present work, we detail a low temperature solution-based approach to produce BiTe-CuTe nanocomposites with improved thermoelectric performance. Our approach consists in combining proper ratios of colloidal nanoparticles and to consolidate the resulting mixture into nanocomposites using a hot press. The transport properties of the nanocomposites are characterized and compared with those of pure BiTe nanomaterials obtained following the same procedure. In contrast with most previous works, the presence of CuTe nanodomains does not result in a significant reduction of the lattice thermal conductivity of the reference BiTe nanomaterial, which is already very low. However, the introduction of CuTe yields a nearly threefold increase of the power factor associated to a simultaneous increase of the Seebeck coefficient and electrical conductivity at temperatures above 400 K. Taking into account the band alignment of the two materials, we rationalize this increase by considering that CuTe nanostructures, with a relatively low electron affinity, are able to inject electrons into BiTe, enhancing in this way its electrical conductivity. The simultaneous increase of the Seebeck coefficient is related to the energy filtering of charge carriers at energy barriers within BiTe domains associated with the accumulation of electrons in regions nearby a CuTe/BiTe heterojunction. Overall, with the incorporation of a proper amount of CuTe nanoparticles, we demonstrate a 250% improvement of the thermoelectric figure of merit of BiTe, This work was supported by the European Regional Development Funds and by the Generalitat de Catalunya through the project 2017SGR1246. Y.Z, C.X, M.L, K.X and X.H thank the China Scholarship Council for the scholarship support. MI acknowledges financial support from IST Austria. YL acknowledges funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No. 754411. ICN2 acknowledges funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO project ENE2017-85087-C3. ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (grant no. SEV-2017-0706) and is funded by the CERCA Program/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

PbS-Pb-Cu xS Composites for Thermoelectric Application

  • Li, Mengyao
  • Liu, Yu
  • Zhang, Yu
  • Han, Xu
  • Xiao, Ke
  • Nabahat, Mehran
  • Arbiol, Jordi
  • Llorca, Jordi
  • Ibáñez, María
  • Cabot, Andreu
Composite materials offer numerous advantages in a wide range of applications, including thermoelectrics. Here, semiconductor-metal composites are produced by just blending nanoparticles of a sulfide semiconductor obtained in aqueous solution and at room temperature with a metallic Cu powder. The obtained blend is annealed in a reducing atmosphere and afterward consolidated into dense polycrystalline pellets through spark plasma sintering (SPS). We observe that, during the annealing process, the presence of metallic copper activates a partial reduction of the PbS, resulting in the formation of PbS-Pb-CuxS composites. The presence of metallic lead during the SPS process habilitates the liquid-phase sintering of the composite. Besides, by comparing the transport properties of PbS, the PbS-Pb-CuxS composites, and PbS-CuxS composites obtained by blending PbS and CuxS nanoparticles, we demonstrate that the presence of metallic lead decisively contributes to a strong increase of the charge carrier concentration through spillover of charge carriers enabled by the low work function of lead. The increase in charge carrier concentration translates into much higher electrical conductivities and moderately lower Seebeck coefficients. These properties translate into power factors up to 2.1 mW m-1 K-2 at ambient temperature, well above those of PbS and PbS + CuxS. Additionally, the presence of multiple phases in the final composite results in a notable decrease in the lattice thermal conductivity. Overall, the introduction of metallic copper in the initial blend results in a significant improvement of the thermoelectric performance of PbS, reaching a dimensionless thermoelectric figure of merit ZT = 1.1 at 750 K, which represents about a 400% increase over bare PbS. Besides, an average ZTave = 0.72 in the temperature range 320-773 K is demonstrated., This work was supported by the European Regional Development Funds. M.L., Y.Z., X.H., and K.X. thank the China Scholarship Council for scholarship support. M. I. has been financially supported by IST Austria and the Werner Siemens Foundation. Y.L. acknowledges funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No. 754411. J.L. is a Serra Húnter fellow and is grateful to ICREA Academia program and projects MICINN/FEDER RTI2018-093996-B-C31 and GC 2017 SGR 128. ICN2 acknowledges funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO project NANOGEN (PID2020-116093RB-C43). ICN2 was supported by the Severo Ochoa program from Spanish MINECO (grant no. SEV-2017-0706) and was funded by the CERCA Programme/Generalitat de Catalunya. X.H. thanks China Scholarship Council for scholarship support (201804910551). Part of the present work was performed in the framework of Universitat Autònoma de Barcelona Materials Science Ph.D. program.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Defect Engineering in Solution-Processed Polycrystalline SnSe Leads to High Thermoelectric Performance

  • Liu, Yu
  • Calcabrini, Mariano
  • Yu, Yuan
  • Lee, Seung-Ho
  • Chang, Cheng
  • David, Jeremy
  • Ghosh, T.
  • Spadaro, Maria Chiara
  • Xie, Chenyang
  • Cojocaru-Mirédin, Oana
  • Arbiol, Jordi
  • Ibáñez, María
SnSe has emerged as one of the most promising materials for thermoelectric energy conversion due to its extraordinary performance in its single-crystal form and its low-cost constituent elements. However, to achieve an economic impact, the polycrystalline counterpart needs to replicate the performance of the single crystal. Herein, we optimize the thermoelectric performance of polycrystalline SnSe produced by consolidating solution-processed and surface-engineered SnSe particles. In particular, the SnSe particles are coated with CdSe molecular complexes that crystallize during the sintering process, forming CdSe nanoparticles. The presence of CdSe nanoparticles inhibits SnSe grain growth during the consolidation step due to Zener pinning, yielding a material with a high density of grain boundaries. Moreover, the resulting SnSe-CdSe nanocomposites present a large number of defects at different length scales, which significantly reduce the thermal conductivity. The produced SnSe-CdSe nanocomposites exhibit thermoelectric figures of merit up to 2.2 at 786 K, which is among the highest reported for solution-processed SnSe., This work was financially supported by IST Austria and the Werner Siemens Foundation. Y.L. acknowledges funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No. 754411. S.L. and M.C. received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie Grant Agreement No. 665385. J.D. acknowledges funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement no. 665919 (P-SPHERE) cofunded by Severo Ochoa Programme. C.C. acknowledges funding from the FWF “Lise Meitner Fellowship” grant agreement M 2889-N. Y.Y. and O.C.-M. acknowledge the financial support from DFG within the project SFB 917: Nanoswitches. M.C.S. received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 754510 (PROBIST) and the Severo Ochoa programme. J.D. received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 665919 (P-SPHERE) cofunded by Severo Ochoa Programme. The ICN2 is funded by the CERCA Program/Generalitat de Catalunya and by the Severo Ochoa program of the Spanish Ministry of Economy, Industry, and Competitiveness (MINECO, grant no. SEV-2017-0706). ICN2 acknowledges funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO project NANOGEN (PID2020-116093RB-C43). This project received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement No. 823717-ESTEEM3. The FIB sample preparation was conducted in the LMA-INA-Universidad de Zaragoza.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Room temperature aqueous-based synthesis of copper-doped lead sulfide nanoparticles for thermoelectric application

  • Li, Mengyao
  • Liu, Yu
  • Zhang, Yu
  • Chang, Cheng
  • Zhang, Ting
  • Yang, Dawei
  • Xiao, Ke
  • Arbiol, Jordi
  • Ibáñez, María
  • Cabot, Andreu
A versatile, scalable, room temperature and surfactant-free route for the synthesis of metal chalcogenide nanoparticles in aqueous solution is detailed here for the production of PbS and Cu-doped PbS nanoparticles. Subsequently, nanoparticles are annealed in a reducing atmosphere to remove surface oxide, and consolidated into dense polycrystalline materials by means of spark plasma sintering. By characterizing the transport properties of the sintered material, we observe the annealing step and the incorporation of Cu to play a key role in promoting the thermoelectric performance of PbS. The presence of Cu allows improving the electrical conductivity by increasing the charge carrier concentration and simultaneously maintaining a large charge carrier mobility, which overall translates into record power factors at ambient temperature, 2.3 mWmK. Simultaneously, the lattice thermal conductivity decreases with the introduction of Cu, leading to a record high ZT = 0.37 at room temperature and ZT = 1.22 at 773 K. Besides, a record average ZT = 0.76 is demonstrated in the temperature range 320–773 K for n-type PbCuS., This work was supported by the European Regional Development Funds. MYL, YZ, DWY and KX thank the China Scholarship Council for scholarship support. YL acknowledges funding from the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No. 754411 and the funding for scientific research startup of Hefei University of Technology (No. 13020-03712021049). MI acknowledges funding from IST Austria and the Werner Siemens Foundation. CC acknowledges funding from the FWF “Lise Meitner Fellowship” grant agreement M 2889-N. TZ has received funding from the CSC-UAB PhD scholarship program. ICN2 acknowledges funding from Generalitat de Catalunya 2017 SGR 327. ICN2 thanks support from the project NANOGEN (PID2020-116093RB-C43), funded by MCIN/ AEI/10.13039/501100011033/. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706) and is funded by the CERCA Programme / Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Surface Functionalization of Surfactant-Free Particles: A Strategy to Tailor the Properties of Nanocomposites for Enhanced Thermoelectric Performance

  • Chang, Cheng
  • Liu, Yu
  • Ho Lee, Seung
  • Spadaro, Maria Chiara
  • Koskela, Kristopher M.
  • Kleinhanns, Tobias
  • Costanzo, Tommaso
  • Arbiol, Jordi
  • Brutchey, Richard L.
  • Ibáñez, María
The broad implementation of thermoelectricity requires high-performance and low-cost materials. One possibility is employing surfactant-free solution synthesis to produce nanopowders. We propose the strategy of functionalizing “naked” particles’ surface by inorganic molecules to control the nanostructure and, consequently, thermoelectric performance. In particular, we use bismuth thiolates to functionalize surfactant-free SnTe particles’ surfaces. Upon thermal processing, bismuth thiolates decomposition renders SnTe-BiS nanocomposites with synergistic functions: 1) carrier concentration optimization by Bi doping; 2) Seebeck coefficient enhancement and bipolar effect suppression by energy filtering; and 3) lattice thermal conductivity reduction by small grain domains, grain boundaries and nanostructuration. Overall, the SnTe-BiS nanocomposites exhibit peak z T up to 1.3 at 873 K and an average z T of ≈0.6 at 300–873 K, which is among the highest reported for solution-processed SnTe., This work was financially supported by IST Austria and the Werner Siemens Foundation. C.C. acknowledges funding from the FWF “Lise Meitner Fellowship” grant agreement M 2889-N. Lise Meitner Project (M2889-N). Y.L. acknowledges funding from the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No. 754411. R.L.B. thanks the National Science Foundation for support under DMR-1904719. MCS acknowledge MINECO Juan de la Cierva Incorporation fellowship (JdlCI 2019) and Severo Ochoa. M.C.S. and J.A. acknowledge funding from Generalitat de Catalunya 2017 SGR 327. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant no. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya. This study was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and Generalitat de Catalunya.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Statistical modeling of adaptive neural networks explains co-existence of avalanches and oscillations in resting human brain

  • Lombardi, Fabrizio
  • Pepić, Selver
  • Shriki, Oren
  • Tkačik, Gašper
  • De Martino, Daniele
Neurons in the brain are wired into adaptive networks that exhibit collective dynamics as diverse as scale-specific oscillations and scale-free neuronal avalanches. Although existing models account for oscillations and avalanches separately, they typically do not explain both phenomena, are too complex to analyze analytically or intractable to infer from data rigorously. Here we propose a feedback-driven Ising-like class of neural networks that captures avalanches and oscillations simultaneously and quantitatively. In the simplest yet fully microscopic model version, we can analytically compute the phase diagram and make direct contact with human brain resting-state activity recordings via tractable inference of the model’s two essential parameters. The inferred model quantitatively captures the dynamics over a broad range of scales, from single sensor oscillations to collective behaviors of extreme events and neuronal avalanches. Importantly, the inferred parameters indicate that the co-existence of scale-specific (oscillations) and scale-free (avalanches) dynamics occurs close to a non-equilibrium critical point at the onset of self-sustained oscillations., This research was funded in whole, or in part, by the Austrian Science Fund (FWF) (grant no. PT1013M03318 to F.L. and no. P34015 to G.T.)., The study was supported by the European Union Horizon 2020 research and innovation program under the Marie Sklodowska-Curie action (grant agreement No. 754411 to F.L.)., Peer reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Multiscale spatial analysis of two plant–insect interactions: effects of landscape, resource distribution, and other insects

  • Pocull, Guillem
  • Baskett, Carina
  • Barton, Nicholas H.
Context Biotic resource exploitation is a critical determinant of species’ distributions. However, quantifying resource exploitation patterns through space and time can be difficult, complicating their incorporation in spatial ecology studies. Therefore, understanding the local drivers of spatial patterns of resource exploitation may contribute to better large-scale species distribution models. Objectives We investigated (1) how the resource exploitation patterns of two trophic interactions (plant–insect) are explained by insect behaviour, resource aggregation, and potential insect-insect interactions. We also analyzed how (2) resource patch size and (3) resource accessibility in a heterogeneous landscape affected host exploitation patterns. Methods We quantified nectar robbing by insects in the genus Bombus (bumblebees) and seed predation by Brachypterolus vestitus larvae (Antirrhinum beetle) on Antirrhinum majus L. (wild snapdragons) in the Pyrenees Mountains, Catalonia, Spain. We tested hypotheses about resource exploitation by integrating spatial analyses at multiple scales. Results Both trophic interactions were aggregated, explained by the aggregation of their resource. At some scales, nectar robbing is more aggregated than the resource. Trophic interaction abundance is proportional to resource patch size, following the ideal free distribution model. Landscape features do not explain the locations exploited. Nectar robbing and seed predation occur together more often than expected. Conclusions Our findings suggest that multiple biotic and ecological spatial factors may simultaneously affect resource exploitation at a local scale. These findings should be considered when developing agricultural projects, management plans and conservation policies., Open access funding provided by Institute of Science and Technology (IST Austria). CB received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie Grant Agreement No. 754411. NB was funded by the FWF grant “Löwenmaul speciation” P 32166-B32.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Ligand-mediated band engineering in bottom-up assembled SnTe nanocomposites for thermoelectric energy conversion

  • Ibáñez, Maria|||0000-0001-5013-2843
  • Hasler, Roger
  • Genç, Aziz|||0000-0002-2888-2549
  • Liu, Yu|||0000-0001-7313-6740
  • Kuster, Beatrice
  • Schuster, Maximilian
  • Dobrozhan, Oleksandr|||0000-0001-9238-7596
  • Cadavid, Doris|||0000-0002-1376-6078
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Kovalenko, Maksym V.|||0000-0002-6396-8938
The bottom-up assembly of colloidal nanocrystals is a versatile methodology to produce composite nanomaterials with precisely tuned electronic properties. Beyond the synthetic control over crystal domain size, shape, crystal phase, and composition, solution-processed nanocrystals allow exquisite surface engineering. This provides additional means to modulate the nanomaterial characteristics and particularly its electronic transport properties. For instance, inorganic surface ligands can be used to tune the type and concentration of majority carriers or to modify the electronic band structure. Herein, we report the thermoelectric properties of SnTe nanocomposites obtained from the consolidation of surface-engineered SnTe nanocrystals into macroscopic pellets. A CdSe-based ligand is selected to (i) converge the light and heavy bands through partial Cd alloying and (ii) generate CdSe nanoinclusions as a secondary phase within the SnTe matrix, thereby reducing the thermal conductivity. These SnTe-CdSe nanocomposites possess thermoelectric figures of merit of up to 1.3 at 850 K, which is, to the best of our knowledge, the highest thermoelectric figure of merit reported for solution-processed SnTe.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Tuning transport properties in thermoelectric nanocomposites through inorganic ligands and heterostructured building blocks

  • Ibáñez, Maria|||0000-0001-5013-2843
  • Genç, Aziz|||0000-0002-2888-2549
  • Hasler, Roger
  • Liu, Yu|||0000-0001-7313-6740
  • Dobrozhan, Oleksandr|||0000-0001-9238-7596
  • Nazarenko, Olga
  • De La Mata, Maria|||0000-0002-1581-4838
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Kovalenko, Maksym V.|||0000-0002-6396-8938
Methodologies that involve the use of nanoparticles as "artificial atoms" to rationally build materials in a bottom-up fashion are particularly well-suited to control the matter at the nanoscale. Colloidal synthetic routes allow for an exquisite control over such "artificial atoms" in terms of size, shape, and crystal phase as well as core and surface compositions. We present here a bottom-up approach to produce Pb-Ag-K-S-Te nanocomposites, which is a highly promising system for thermoelectric energy conversion. First, we developed a high-yield and scalable colloidal synthesis route to uniform lead sulfide (PbS) nanorods, whose tips are made of silver sulfide (AgS). We then took advantage of the large surface-to-volume ratio to introduce a p-type dopant (K) by replacing native organic ligands with KTe. Upon thermal consolidation, KTe-surface modified PbS-AgS nanorods yield p-type doped nanocomposites with PbTe and PbS as major phases and AgS and AgTe as embedded nanoinclusions. Thermoelectric characterization of such consolidated nanosolids showed a high thermoelectric figure-of-merit of 1 at 620 K.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Tin selenide molecular precursor for the solution processing of thermoelectric materials and devices

  • Zhang, Yu|||0000-0002-0332-0013
  • Liu, Yu|||0000-0001-7313-6740
  • Xing, Congcong|||0000-0001-7674-6720
  • Zhang, Ting|||0000-0002-0317-9662
  • Li, Mengyao|||0000-0002-9082-7938
  • Pacios Pujadó, Merce|||0000-0002-3559-4561
  • Yu, Xiaoting|||0000-0003-0457-4047
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Cadavid, Doris|||0000-0002-1376-6078
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
In the present work, we report a solution-based strategy to produce crystallographically textured SnSe bulk nanomaterials and printed layers with optimized thermoelectric performance in the direction normal to the substrate. Our strategy is based on the formulation of a molecular precursor that can be continuously decomposed to produce a SnSe powder or printed into predefined patterns. The precursor formulation and decomposition conditions are optimized to produce pure phase 2D SnSe nanoplates. The printed layer and the bulk material obtained after hot press displays a clear preferential orientation of the crystallographic domains, resulting in an ultralow thermal conductivity of 0.55 W m-1 K-1 in the direction normal to the substrate. Such textured nanomaterials present highly anisotropic properties with the best thermoelectric performance in plane, i.e., in the directions parallel to the substrate, which coincide with the crystallographic bc plane of SnSe. This is an unfortunate characteristic because thermoelectric devices are designed to create/harvest temperature gradients in the direction normal to the substrate. We further demonstrate that this limitation can be overcome with the introduction of small amounts of tellurium in the precursor. The presence of tellurium allows one to reduce the band gap and increase both the charge carrier concentration and the mobility, especially the cross plane, with a minimal decrease of the Seebeck coefficient. These effects translate into record out of plane ZT values at 800 K.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Defect engineering in solution-processed polycrystalline SnSe leads to high thermoelectric performance

  • Liu, Yu|||0000-0001-7313-6740
  • Calcabrini, Mariano|||0000-0003-4566-5877
  • Yu, Yuan|||0000-0002-3148-6600
  • Lee, Seungho|||0000-0002-6962-8598
  • Chang, Cheng|||0000-0002-9515-4277
  • David, Jérémy|||0000-0003-3219-149X
  • Ghosh, Tanmoy
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Xie, Chenyang
  • Cojocaru-Mirédin, Oana|||0000-0001-6543-203X
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Ibáñez, Maria|||0000-0001-5013-2843
SnSe has emerged as one of the most promising materials for thermoelectric energy conversion due to its extraordinary performance in its single-crystal form and its low-cost constituent elements. However, to achieve an economic impact, the polycrystalline counterpart needs to replicate the performance of the single crystal. Herein, we optimize the thermoelectric performance of polycrystalline SnSe produced by consolidating solution-processed and surface-engineered SnSe particles. In particular, the SnSe particles are coated with CdSe molecular complexes that crystallize during the sintering process, forming CdSe nanoparticles. The presence of CdSe nanoparticles inhibits SnSe grain growth during the consolidation step due to Zener pinning, yielding a material with a high density of grain boundaries. Moreover, the resulting SnSe-CdSe nanocomposites present a large number of defects at different length scales, which significantly reduce the thermal conductivity. The produced SnSe-CdSe nanocomposites exhibit thermoelectric figures of merit up to 2.2 at 786 K, which is among the highest reported for solution-processed SnSe.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Enhanced Thermoelectric Performance of n-Type BiSe Nanosheets through Sn Doping

  • Li, Mengyao|||0000-0002-9082-7938
  • Zhang, Yu|||0000-0002-0332-0013
  • Zhang, Ting|||0000-0002-0317-9662
  • Zuo, Yong|||0000-0003-1564-467X
  • Xiao, Ke
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Liu, Yu|||0000-0001-7313-6740
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The cost-effective conversion of low-grade heat into electricity using thermoelectric devices requires developing alternative materials and material processing technologies able to reduce the currently high device manufacturing costs. In this direction, thermoelectric materials that do not rely on rare or toxic elements such as tellurium or lead need to be produced using high-throughput technologies not involving high temperatures and long processes. BiSe is an obvious possible Te-free alternative to BiTe for ambient temperature thermoelectric applications, but its performance is still low for practical applications, and additional efforts toward finding proper dopants are required. Here, we report a scalable method to produce BiSe nanosheets at low synthesis temperatures. We studied the influence of different dopants on the thermoelectric properties of this material. Among the elements tested, we demonstrated that Sn doping resulted in the best performance. Sn incorporation resulted in a significant improvement to the BiSe Seebeck coefficient and a reduction in the thermal conductivity in the direction of the hot-press axis, resulting in an overall 60% improvement in the thermoelectric figure of merit of BiSe.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Surface functionalization of surfactant-free particles, a strategy to tailor the properties of nanocomposites for enhanced thermoelectric performance

  • Chang, Cheng|||0000-0002-9515-4277
  • Liu, Yu|||0000-0001-7313-6740
  • Lee, Seung Ho
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Koskela, Kristopher M.
  • Kleinhanns, Tobias
  • Costanzo, Tommaso
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Brutchey, Richard L.
  • Ibáñez, Maria|||0000-0001-5013-2843
The broad implementation of thermoelectricity requires high-performance and low-cost materials. One possibility is employing surfactant-free solution synthesis to produce nanopowders. We propose the strategy of functionalizing "naked" particles' surface by inorganic molecules to control the nanostructure and, consequently, thermoelectric performance. In particular, we use bismuth thiolates to functionalize surfactant-free SnTe particles' surfaces. Upon thermal processing, bismuth thiolates decomposition renders SnTe-BiS nanocomposites with synergistic functions: 1) carrier concentration optimization by Bi doping; 2) Seebeck coefficient enhancement and bipolar effect suppression by energy filtering; and 3) lattice thermal conductivity reduction by small grain domains, grain boundaries and nanostructuration. Overall, the SnTe-BiS nanocomposites exhibit peak z T up to 1.3 at 873 K and an average z T of ≈0.6 at 300-873 K, which is among the highest reported for solution-processed SnTe.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Room temperature aqueous-based synthesis of copper-doped lead sulfide nanoparticles for thermoelectric application

  • Li, Mengyao|||0000-0002-9082-7938
  • Liu, Yu|||0000-0001-7313-6740
  • Zhang, Yu|||0000-0002-0332-0013
  • Chang, Cheng|||0000-0002-9515-4277
  • Zhang, Ting|||0000-0002-0317-9662
  • Yang, Dawei|||0000-0002-3842-8286
  • Xiao, Ke
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
A versatile, scalable, room temperature and surfactant-free route for the synthesis of metal chalcogenide nanoparticles in aqueous solution is detailed here for the production of PbS and Cu-doped PbS nanoparticles. Subsequently, nanoparticles are annealed in a reducing atmosphere to remove surface oxide, and consolidated into dense polycrystalline materials by means of spark plasma sintering. By characterizing the transport properties of the sintered material, we observe the annealing step and the incorporation of Cu to play a key role in promoting the thermoelectric performance of PbS. The presence of Cu allows improving the electrical conductivity by increasing the charge carrier concentration and simultaneously maintaining a large charge carrier mobility, which overall translates into record power factors at ambient temperature, 2.3 mWmK. Simultaneously, the lattice thermal conductivity decreases with the introduction of Cu, leading to a record high ZT = 0.37 at room temperature and ZT = 1.22 at 773 K. Besides, a record average ZT = 0.76 is demonstrated in the temperature range 320-773 K for n-type Pb0.955Cu0.045S.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Doping-mediated stabilization of copper vacancies to promote thermoelectric properties of Cu2-xS

  • Zhang, Yu|||0000-0002-0332-0013
  • Xing, Congcong|||0000-0001-7674-6720
  • Liu, Yu|||0000-0001-7313-6740
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Wang, Xiang
  • Li, Mengyao|||0000-0002-9082-7938
  • Xiao, Ke
  • Zhang, Ting|||0000-0002-0317-9662
  • Guardia, Pablo|||0000-0001-9076-4642
  • Lim, Khak Ho|||0000-0003-3116-8589
  • Moghaddam, Ahmad Ostovari
  • Llorca, Jordi|||0000-0002-7447-9582
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Copper chalcogenides are outstanding thermoelectric materials for applications in the medium-high temperature range. Among different chalcogenides, while CuSe is characterized by higher thermoelectric figures of merit, CuS provides advantages in terms of low cost and element abundance. In the present work, we investigate the effect of different dopants to enhance the CuS performance and also its thermal stability. Among the tested options, Pb-doped CuS shows the highest improvement in stability against sulfur volatilization. Additionally, Pb incorporation allows tuning charge carrier concentration, which enables a significant improvement of the power factor. We demonstrate here that the introduction of an optimal additive amount of just 0.3% results in a threefold increase of the power factor in the middle-temperature range (500-800 K) and a record dimensionless thermoelectric figure of merit above 2 at 880 K.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Influence of copper telluride nanodomains on the transport properties of n-type bismuth telluride

  • Zhang, Yu|||0000-0002-0332-0013
  • Xing, Congcong|||0000-0001-7674-6720
  • Liu, Yu|||0000-0001-7313-6740
  • Li, Mengyao|||0000-0002-9082-7938
  • Xiao, Ke
  • Guardia, Pablo|||0000-0001-9076-4642
  • Lee, Seungho|||0000-0002-6962-8598
  • Han, Xu|||0000-0001-8319-8830
  • Moghaddam, Ahmad Ostovari
  • Roa, Joan Josep|||0000-0002-7440-0766
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Pan, Kai
  • Prato, Mirko|||0000-0002-2188-8059
  • Xie, Ying
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The high processing cost, poor mechanical properties and moderate performance of BiTe-based alloys used in thermoelectric devices limit the cost-effectiveness of this energy conversion technology. Towards solving these current challenges, in the present work, we detail a low temperature solution-based approach to produce BiTe-CuTe nanocomposites with improved thermoelectric performance. Our approach consists in combining proper ratios of colloidal nanoparticles and to consolidate the resulting mixture into nanocomposites using a hot press. The transport properties of the nanocomposites are characterized and compared with those of pure BiTe nanomaterials obtained following the same procedure. In contrast with most previous works, the presence of CuTe nanodomains does not result in a significant reduction of the lattice thermal conductivity of the reference BiTe nanomaterial, which is already very low. However, the introduction of CuTe yields a nearly threefold increase of the power factor associated to a simultaneous increase of the Seebeck coefficient and electrical conductivity at temperatures above 400 K. Taking into account the band alignment of the two materials, we rationalize this increase by considering that CuTe nanostructures, with a relatively low electron affinity, are able to inject electrons into BiTe, enhancing in this way its electrical conductivity. The simultaneous increase of the Seebeck coefficient is related to the energy filtering of charge carriers at energy barriers within BiTe domains associated with the accumulation of electrons in regions nearby a CuTe/BiTe heterojunction. Overall, with the incorporation of a proper amount of CuTe nanoparticles, we demonstrate a 250% improvement of the thermoelectric figure of merit of Bi2Te3.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

PbS-Pb-Cu xS Composites for Thermoelectric Application

  • Li, Mengyao|||0000-0002-9082-7938
  • Liu, Yu|||0000-0001-7313-6740
  • Zhang, Yu|||0000-0002-0332-0013
  • Han, Xu|||0000-0001-8319-8830
  • Xiao, Ke
  • Nabahat, Mehran|||0000-0002-6109-5782
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Composite materials offer numerous advantages in a wide range of applications, including thermoelectrics. Here, semiconductor-metal composites are produced by just blending nanoparticles of a sulfide semiconductor obtained in aqueous solution and at room temperature with a metallic Cu powder. The obtained blend is annealed in a reducing atmosphere and afterward consolidated into dense polycrystalline pellets through spark plasma sintering (SPS). We observe that, during the annealing process, the presence of metallic copper activates a partial reduction of the PbS, resulting in the formation of PbS-Pb-CuxS composites. The presence of metallic lead during the SPS process habilitates the liquid-phase sintering of the composite. Besides, by comparing the transport properties of PbS, the PbS-Pb-CuxS composites, and PbS-CuxS composites obtained by blending PbS and CuxS nanoparticles, we demonstrate that the presence of metallic lead decisively contributes to a strong increase of the charge carrier concentration through spillover of charge carriers enabled by the low work function of lead. The increase in charge carrier concentration translates into much higher electrical conductivities and moderately lower Seebeck coefficients. These properties translate into power factors up to 2.1 mW m-1 K-2 at ambient temperature, well above those of PbS and PbS + CuxS. Additionally, the presence of multiple phases in the final composite results in a notable decrease in the lattice thermal conductivity. Overall, the introduction of metallic copper in the initial blend results in a significant improvement of the thermoelectric performance of PbS, reaching a dimensionless thermoelectric figure of merit ZT = 1.1 at 750 K, which represents about a 400% increase over bare PbS. Besides, an average ZTave = 0.72 in the temperature range 320-773 K is demonstrated.