Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 42
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Sulfate-Decorated Amorphous-Crystalline Cobalt-Iron Oxide Nanosheets to Enhance O-O Coupling in the Oxygen Evolution Reaction

  • Wang, Xiang
  • Li, Junshan|||0000-0002-1482-1972
  • Xue, Qian
  • Han, Xu|||0000-0001-8319-8830
  • Xing, Congcong|||0000-0001-7674-6720
  • Liang, Zhifu
  • Guardia, Pablo|||0000-0001-9076-4642
  • Zuo, Yong|||0000-0003-1564-467X
  • Du, Ruifeng
  • Balcells i Argemí, Lluís|||0000-0001-6603-7357
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The electrochemical oxygen evolution reaction (OER) plays a fundamental role in several energy technologies, which performance and cost-effectiveness are in large part related to the used OER electrocatalyst. Herein, we detail the synthesis of cobalt-iron oxide nanosheets containing controlled amounts of well-anchored SO42- anionic groups (CoFexOy-SO4). We use a cobalt-based zeolitic imidazolate framework (ZIF-67) as the structural template and a cobalt source and Mohr's salt ((NH4)2Fe(SO4)2·6H2O) as the source of iron and sulfate. When combining the ZIF-67 with ammonium iron sulfate, the protons produced by the ammonium ion hydrolysis (NH4+ + H2O = NH3·H2O + H+) etch the ZIF-67, dissociating its polyhedron structure, and form porous assemblies of two-dimensional nanostructures through a diffusion-controlled process. At the same time, iron ions partially replace cobalt within the structure, and SO42- ions are anchored on the material surface by exchange with organic ligands. As a result, ultrathin CoFexOy-SO4 nanosheets are obtained. The proposed synthetic procedure enables controlling the amount of Fe and SO4 ions and analyzing the effect of each element on the electrocatalytic activity. The optimized CoFexOy-SO4 material displays outstanding OER activity with a 10 mA cm-2 overpotential of 268 mV, a Tafel slope of 46.5 mV dec-1, and excellent stability during 62 h. This excellent performance is correlated to the material's structural and chemical parameters. The assembled nanosheet structure is characterized by a large electrochemically active surface area, a high density of reaction sites, and fast electron transportation. Meanwhile, the introduction of iron increases the electrical conductivity of the catalysts and provides fast reaction sites with optimum bond energy and spin state for the adsorption of OER intermediates. The presence of sulfate ions at the catalyst surface modifies the electronic energy level of active sites, regulates the adsorption of intermediates to reduce the OER overpotential, and promotes the surface charge transfer, which accelerates the formation of oxygenated intermediates. Overall, the present work details the synthesis of a high-efficiency OER electrocatalyst and demonstrates the introduction of nonmetallic anionic groups as an excellent strategy to promote electrocatalytic activity in energy conversion technologies.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Palladium Hydride on C2N to Boost Formate Oxidation

  • Wang, Xiang
  • Montaña-Mora, Guillem|||0000-0003-1208-6836
  • Han, Xu|||0000-0001-8319-8830
  • Yu, Jing|||0000-0002-7620-745X
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Liang, Zhifu
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Li, Junshan|||0000-0002-1482-1972
The lack of electrocatalysts for the formate oxidation reaction (FOR) hampers the deployment of direct formate fuel cells (DFFCs). To overcome this limitation, herein, we detail the production of palladium hydride particles supported on CN (PdH@CN) via a facile method. PdH@CN displays excellent FOR performance, reaching current densities up to 5.6 A·mg and stable cycling and chronoamperometric operation. The Pd lattice expands due to the hydrogen intercalation. Besides, an electronic redistribution associated with the distinct electronegativity of Pd and H is observed. Both phenomena modify the electron energy levels, enhancing the activity and stability of the composite catalyst. More specifically, differential functional theory calculations show H intercalation to downshift the Pd d-band center in Pd@CN, weakening adsorbate binding and accelerating the FOR rate-determining step.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A CrMnFeCoNi high entropy alloy boosting oxygen evolution/reduction reactions and zinc-air battery performance

  • He, Ren|||0000-0003-3712-5539
  • Yang, Linlin|||0009-0006-9953-5698
  • Zhang, Yu|||0000-0002-0332-0013
  • Wang, Xiang
  • Lee, Seungho|||0000-0002-6962-8598
  • Zhang, Ting|||0000-0002-0317-9662
  • Li, Lingxiao|||0000-0003-1628-2738
  • Liang, Zhifu
  • Chen, Jingwei
  • Li, Junshan|||0000-0002-1482-1972
  • Ostovari Moghaddam, Ahmad|||0000-0002-5316-3773
  • Llorca, Jordi|||0000-0002-7447-9582
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Xu, Ying
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The development of cost-effective, high-activity and stable bifunctional catalysts for the oxygen reduction and evolution reactions (ORR/OER) is essential for zinc-air batteries (ZABs) to reach the market. Such catalysts must contain multiple adsorption/reaction sites to cope with the high demands of reversible oxygen electrodes. Herein, we propose a high entropy alloy (HEA) based on relatively abundant elements as a bifunctional ORR/OER catalyst. More specifically, we detail the synthesis of a CrMnFeCoNi HEA through a low-temperature solution-based approach. Such HEA displays superior OER performance with an overpotential of 265 mV at a current density of 10 mA/cm, and a 37.9 mV/dec Tafel slope, well above the properties of a standard commercial catalyst based on RuO. This high performance is partially explained by the presence of twinned defects, the incidence of large lattice distortions, and the electronic synergy between the different components, being Cr key to decreasing the energy barrier of the OER rate-determining step. CrMnFeCoNi also displays superior ORR performance with a half-potential of 0.78 V and an onset potential of 0.88 V, comparable with commercial Pt/C. The potential gap (Egap) between the OER overpotential and the ORR half-potential of CrMnFeCoNi is just 0.734 V. Taking advantage of these outstanding properties, ZABs are assembled using the CrMnFeCoNi HEA as air cathode and a zinc foil as the anode. The assembled cells provide an open-circuit voltage of 1.489 V, i.e. 90% of its theoretical limit (1.66 V), a peak power density of 116.5 mW/cm, and a specific capacity of 836 mAh/g that stays stable for more than 10 days of continuous cycling, i.e. 720 cycles @ 8 mA/cm and 16.6 days of continuous cycling, i.e. 1200 cycles @ 5 mA/cm.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Compositionally tuned NixSn alloys as anode materials for lithium-ion and sodium-ion batteries with a high pseudocapacitive contribution

  • Li, Junshan|||0000-0002-1482-1972
  • Xu, Xijun
  • Luo, Zhishan|||0000-0002-0801-9238
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Yu, Xiaoting|||0000-0003-0457-4047
  • Zuo, Yong|||0000-0003-1564-467X
  • Zhang, Ting|||0000-0002-0317-9662
  • Tang, PengYi|||0000-0002-2306-095X
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Liu, Jun|||0000-0001-5288-3042
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Nickel tin alloy nanoparticles (NPs) with tuned composition NixSn (0.6 ≤ x ≤ 1.9) were synthesized by a solution-based procedure and used as anode materials for Li-ion batteries (LIBs) and Na-ion batteries (SIBs). Among the compositions tested, Ni₀₉Sn-based electrodes exhibited the best performance in both LIBs and SIBs. As LIB anodes, Ni₀₉Sn-based electrodes delivered charge-discharge capacities of 980 mAh g⁻¹ after 340 cycles at 0.2 A g⁻¹ rate, which surpassed their maximum theoretical capacity considering that only Sn is lithiated. A kinetic characterization of the charge-discharge process demonstrated the electrode performance to be aided by a significant pseudocapacitive contribution that compensated for the loss of energy storage capacity associated to the solid-electrolyte interphase formation. This significant pseudocapacitive contribution, which not only translated into higher capacities but also longer durability, was associated to the small size of the crystal domains and the proper electrode composition. The performance of NixSn-based electrodes toward Na-ion storage was also characterized, reaching significant capacities above 200 mAh g⁻¹ at 0.1 A g⁻¹ but with a relatively fast fade over 120 continuous cycles. A relatively larger pseudocapacitive contribution was obtained in Ni Sn-based electrodes for SIBs when compared with LIBs, consistently with the lower contribution of the Na ion diffusion associated to its larger size.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Colloidal Ni2-, XCoxP nanocrystals for the hydrogen evolution reaction

  • Liu, Junfeng|||0000-0003-3164-6472
  • Wang, Zhenxing|||0000-0001-5083-0975
  • David, Jérémy|||0000-0003-3219-149X
  • Llorca, Jordi|||0000-0002-7447-9582
  • Li, Junshan|||0000-0002-1482-1972
  • Yu, Xiaoting|||0000-0003-0457-4047
  • Shavel, Alexey|||0000-0002-3995-0391
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Meyns, Michaela|||0000-0003-2476-9001
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
A cost-effective and scalable approach was developed to produce monodisperse NiCoP nanocrystals (NCs) with composition tuned over the entire range (0 ≤ x ≤ 2). NiCoP NCs were synthesized using low-cost, stable and low-toxicity triphenyl phosphite (TPP) as a phosphorus source, metal chlorides as metal precursors and hexadecylamine (HDA) as a ligand. The synthesis involved the nucleation of amorphous Ni-P and its posterior crystallization and simultaneous incorporation of Co. The composition, size and morphology of the NiCoP NCs could be controlled simply by varying the ratio of Ni and Co precursors and the amounts of TPP and HDA. Ternary NiCoP-based electrocatalysts exhibited enhanced electrocatalytic activity toward the hydrogen evolution reaction (HER) compared to binary phosphides. In particular, NiCoP electrocatalysts displayed the lowest overpotential of 97 mV at J = 10 mA cm and an excellent long-term stability. DFT calculations of the Gibbs free energy for hydrogen adsorption at the surface of NiCoP NCs showed NiCoP to have the most appropriate composition to optimize this parameter within the whole NiCoP series. However, the hydrogen adsorption energy was demonstrated not to be the only parameter controlling the HER activity in NiCoP.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Tin Diselenide Molecular Precursor for Solution-Processable Thermoelectric Materials

  • Zhang, Yu|||0000-0002-0332-0013
  • Liu, Yu|||0000-0001-7313-6740
  • Lim, Khak Ho|||0000-0003-3116-8589
  • Xing, Congcong|||0000-0001-7674-6720
  • Li, Mengyao|||0000-0002-9082-7938
  • Zhang, Ting|||0000-0002-0317-9662
  • Tang, PengYi|||0000-0002-2306-095X
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Ng, Ka Ming
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Guardia, Pablo|||0000-0001-9076-4642
  • Prato, Mirko|||0000-0002-2188-8059
  • Cadavid, Doris|||0000-0002-1376-6078
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
In the present work, we detail a fast and simple solution-based method to synthesize hexagonal SnSe nanoplates (NPLs) and their use to produce crystallographically textured SnSe nanomaterials. We also demonstrate that the same strategy can be used to produce orthorhombic SnSe nanostructures and nanomaterials. NPLs are grown through a screw dislocation-driven mechanism. This mechanism typically results in pyramidal structures, but we demonstrate here that the growth from multiple dislocations results in flower-like structures. Crystallographically textured SnSe bulk nanomaterials obtained from the hot pressing of these SnSe structures display highly anisotropic charge and heat transport properties and thermoelectric (TE) figures of merit limited by relatively low electrical conductivities. To improve this parameter, SnSe NPLs are blended here with metal nanoparticles. The electrical conductivities of the blends are significantly improved with respect to bare SnSe NPLs, what translates into a three-fold increase of the TE Figure of merit, reaching unprecedented ZT values up to 0.65.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Colloidal Ni-Co-Sn nanoparticles as efficient electrocatalysts for the methanol oxidation reaction

  • Li, Junshan|||0000-0002-1482-1972
  • Luo, Zhishan|||0000-0002-0801-9238
  • He, Feng
  • Zuo, Yong|||0000-0003-1564-467X
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Liu, Junfeng|||0000-0003-3164-6472
  • Yu, Xiaoting|||0000-0003-0457-4047
  • Du, Ruifeng
  • Zhang, Ting|||0000-0002-0317-9662
  • Infante Carrió, María F.
  • Tang, PengYi|||0000-0002-2306-095X
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The deployment of direct methanol fuel cells requires engineering cost-effective and durable electrocatalysts for the methanol oxidation reaction (MOR). As an alternative to noble metals, Ni-based alloys have shown excellent performance and good stability toward the MOR. Herein, we present a series of NiCoSn colloidal nanoparticles (NPs) with composition tuned over the entire Ni/Co range (0 ≤ x ≤ 3). We demonstrate electrodes based on these ternary NPs to provide improved catalytic performance toward the MOR in an alkaline medium when compared with binary NiSn NPs. A preliminary composition optimization resulted in NiCoSn NP-based electrodes exhibiting extraordinary mass current densities, up to 1050 mA mg, at 0.6 V vs. Hg/HgO in 1.0 M KOH containing 1.0 M methanol. This current density was about two-fold higher than that of NiSn electrodes (563 mA mg). The excellent performance obtained with the substitution of small amounts of Ni by Co was concomitant with an increase of the surface coverage of active species and an enhancement of the diffusivity of the reaction limiting species. Additionally, saturation of the catalytic activity at higher methanol concentrations was measured for NiCoSn NP-based electrodes containing a small amount of Co when compared with binary NiSn NPs. While the electrode stability was improved with respect to elemental Ni NP-based electrodes, the introduction of small amounts of Co slightly decreased the cycling performance. Additionally, Sn, a key element to improve stability with respect to elemental Ni NPs, was observed to slowly dissolve in the presence of KOH. Density functional theory calculations on metal alloy surfaces showed the incorporation of Co within the NiSn structure to provide more effective sites for CO and CHOH adsorption. However, the relatively lower stability could not be related to CO or CHOH poisoning.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

SnP nanocrystals as anode materials for Na-ion batteries

  • Liu, Junfeng|||0000-0003-3164-6472
  • Wang, Shutao|||0000-0002-1689-2272
  • Kravchyk, Kostiantyn
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Krumeich, Frank|||0000-0001-5625-1536
  • Widmer, Roland
  • Nasiou, Déspina
  • Meyns, Michaela|||0000-0003-2476-9001
  • Llorca, Jordi|||0000-0002-7447-9582
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Kovalenko, Maksym V.|||0000-0002-6396-8938
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Tin monophosphide is a layered material consisting of Sn-P-P-Sn sandwiches that are stacked on top of each other to form a three dimensional crystallographic structure. Its composition and crystal structure makes it an excellent candidate anode material for sodium-ion batteries (SIBs). However, SnP is yet to be explored for such and other applications due to its challenging synthesis. In the present work, we report the synthesis of SnP nanocrystals (NCs) from the reaction of hexamethylphosphorous triamide (HMPT) and a tin phosphonate prepared from tin oxalate and a long chain phosphonic acid. SnP NCs obtained from this reaction displayed a spherical geometry and a trigonal crystallographic phase with a superstructure attributed to ordered diphosphorus pairs. Such NCs were mixed with carbon black and used as anode materials in SIBs. SIBs based on SnP NCs and sodium(i) bis(fluorosulfonyl)imide (NaFSI) electrolyte displayed a high reversible capacity of 600 mA h g at a current density of 100 mA g and cycling stability for over 200 cycles. Their excellent cycling performance is associated with both the small size of the crystal domains and the particular composition and phase of SnP which prevent mechanical disintegration and major phase separation during sodiation and desodiation cycles. These results demonstrate SnP to be an attractive anode material for sodium ion batteries.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Solution-Processed Ultrathin SnS2-Pt Nanoplates for Photoelectrochemical Water Oxidation

  • Zuo, Yong|||0000-0003-1564-467X
  • Liu, Yongpeng|||0000-0002-4544-4217
  • Li, Junshan|||0000-0002-1482-1972
  • Du, Ruifeng
  • Yu, Xiaoting|||0000-0003-0457-4047
  • Xing, Congcong|||0000-0001-7674-6720
  • Zhang, Ting|||0000-0002-0317-9662
  • Yao, Liang
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Sivula, Kevin|||0000-0002-8458-0270
  • Guijarro, Néstor|||0000-0002-3277-8816
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Tin disulfide (SnS ) is attracting significant interest because of the abundance of its elements and its excellent optoelectronic properties in part related to its layered structure. In this work, we specify the preparation of ultrathin SnS nanoplates (NPLs) through a hot-injection solution-based process. Subsequently, Pt was grown on their surface via in situ reduction of a Pt salt. The photoelectrochemical (PEC) performance of such nanoheterostructures as photoanode toward water oxidation was tested afterwards. Optimized SnS -Pt photoanodes provided significantly higher photocurrent densities than bare SnS and SnS -based photoanodes of previously reported study. Mott-Schottky analysis and PEC impedance spectroscopy (PEIS) were used to analyze in more detail the effect of Pt on the PEC performance. From these analyses, we attribute the enhanced activity of SnS -Pt photoanodes reported here to a combination of the very thin SnS NPLs and the proper electronic contact between Pt nanoparticles (NPs) and SnS .
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Upscaling high activity oxygen evolution catalysts based on CoFe2O4 nanoparticles supported on nickel foam for power-to-gas electrochemical conversion with energy efficiencies above 80%

  • Urbain, Félix|||0000-0001-5423-6818
  • Du, Ruifeng
  • Tang, PengYi|||0000-0002-2306-095X
  • Smirnov, Vladimir
  • Andreu, Teresa|||0000-0002-2804-4545
  • Finger, Friedhelm
  • Jiménez Divins, Nuria
  • Llorca, Jordi|||0000-0002-7447-9582
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Morante, Joan Ramon|||0000-0002-4981-4633
We investigate cobalt ferrite nanoparticles (NPs) supported on large-scale electrodes as oxygen evolution reaction (OER) catalysts. Colloidal CoFeO NPs were loaded on low-cost and high surface area nickel foam (NF) scaffolds. The coating process was optimized for large electrode areas, ensuring a proper distribution of the NPs on the NF that allowed overcoming the electrical conductivity limitations of oxide NPs. We were able to produce CoFeO-coated NFs having 10 cm geometric surface areas with overpotentials below 300 mV for the OER at a current density of 50 mA/cm. Such impressively low overpotentials suggested using CoFeO NP-based electrodes within a water electrolysis device. In this prototype device, stable operating currents up to 500 mA at remarkably low cell-voltages of 1.62 and 1.53 V, at ambient and 50 °C electrolyte temperatures, respectively, were reached during operation periods of up to 50 h. The high electrochemical energy efficiencies reached at 50 mA/cm, 75% and 81% respectively, rendered these devices particularly appealing to be combined with low-cost photovoltaic systems for bias-free hydrogen production. Therefore, CoFeO NP-based electrolysers were coupled to low-cost thin-film silicon solar cells with 13% efficiency to complete a system that afforded solar-to-fuel efficiencies above 10%.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Porous NiTiO3/TiO2 nanostructures for photocatatalytic hydrogen evolution

  • Xing, Congcong|||0000-0001-7674-6720
  • Liu, Yongpeng|||0000-0002-4544-4217
  • Zhang, Yu|||0000-0002-0332-0013
  • Liu, Junfeng|||0000-0003-3164-6472
  • Zhang, Ting|||0000-0002-0317-9662
  • Tang, PengYi|||0000-0002-2306-095X
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Soler, Lluís|||0000-0003-1591-3366
  • Sivula, Kevin|||0000-0002-8458-0270
  • Guijarro, Néstor|||0000-0002-3277-8816
  • Wang, Xiang
  • Li, Junshan|||0000-0002-1482-1972
  • Du, Ruifeng
  • Zuo, Yong|||0000-0003-1564-467X
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Llorca, Jordi|||0000-0002-7447-9582
We present a strategy to produce porous NiTiO/TiO nanostructures with excellent photocatalytic activity toward hydrogen generation. In a first step, nickel-doped TiO needle bundles were synthesized by a hydrothermal procedure. Through the sintering in air of these nanostructures, porous NiTiO/TiO heterostructured rods were obtained. Alternatively, the annealing in argon of the nickel-doped TiO needle bundles resulted in NiO/TiO elongated nanostructures. Porous NiTiO/TiO structures were tested for hydrogen evolution in the presence of ethanol. Such porous heterostructures exhibited superior photocatalytic activity toward hydrogen generation, with hydrogen production rates up to 11.5 mmol h g at room temperature. This excellent performance is related here to the optoelectronic properties and geometric parameters of the material.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Chromium phosphide CrP as highly active and stable electrocatalysts for oxygen electroreduction in alkaline media

  • Liu, Junfeng|||0000-0003-3164-6472
  • Yu, Xiaoting|||0000-0003-0457-4047
  • Du, Ruifeng
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Zhang, Ting|||0000-0002-0317-9662
  • Llorca, Jordi|||0000-0002-7447-9582
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Wang, Ying
  • Meyns, Michaela|||0000-0003-2476-9001
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Catalysts for oxygen reduction reaction (ORR) are key components in emerging energy technologies such as fuel cells and metal-air batteries. Developing low-cost, high performance and stable electrocatalysts is critical for the extensive implementation of these technologies. Herein, we present a procedure to prepare colloidal chromium phosphide CrP nanocrystals and we test their performance as ORR electrocatalyst. CrP-based catalysts exhibited remarkable activities with a limiting current density of 4.94 mA cm at 0.2 V, a half-potential of 0.65 V and an onset potential of 0.8 V at 1600 rpm, which are comparable to commercial Pt/C. Advantageously, CrP-based catalysts displayed much higher stabilities and higher tolerances to methanol in alkaline solution. Using density functional theory calculations, we demonstrate CrP to provide a very strong chemisorption of O that facilitates its reduction and explains the excellent ORR performance experimentally demonstrated.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Graphene-supported palladium phosphide PdP2 nanocrystals for ethanol electrooxidation

  • Liu, Junfeng|||0000-0003-3164-6472
  • Luo, Zhishan|||0000-0002-0801-9238
  • Li, Junshan|||0000-0002-1482-1972
  • Yu, Xiaoting|||0000-0003-0457-4047
  • Llorca, Jordi|||0000-0002-7447-9582
  • Nasiou, Déspina
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Meyns, Michaela|||0000-0003-2476-9001
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
We present a procedure to produce single-phase PdP nanocrystals (NCs). The approach involves the reaction of palladium(II) acetylacetonate and hexamethylphosphoroustriamide to nucleate defective Pd P nanoparticles that subsequently, with further phosphorous incorporation, crystallize into PdP . The synthesized PdP NCs were supported on reduced graphene oxide (rGO) and applied as electrocatalysts for ethanol oxidation. The activity of PdP toward the ethanol oxidation reaction (EOR) was over a threefold higher than that of Pd NCs prepared under similar conditions. Even better performance was obtained from PdP NCs supported on rGO, which showed current densities up to 51.4 mA cm and mass activities of 1.60 A mg , that is 4.8 and 15 times higher than Pd NCs. Besides, PdP NCs and PdP /rGO catalysts showed improved stability during EOR than Pd NCs and Pd/rGO.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

In Situ Electrochemical Oxidation of Cu2S into CuO Nanowires as a Durable and Efficient Electrocatalyst for Oxygen Evolution Reaction

  • Zuo, Yong|||0000-0003-1564-467X
  • Liu, Yongpeng|||0000-0002-4544-4217
  • Li, Junshan|||0000-0002-1482-1972
  • Du, Ruifeng
  • Han, Xu|||0000-0001-8319-8830
  • Zhang, Ting|||0000-0002-0317-9662
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Jiménez Divins, Nuria
  • Llorca, Jordi|||0000-0002-7447-9582
  • Guijarro, Néstor|||0000-0002-3277-8816
  • Sivula, Kevin|||0000-0002-8458-0270
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Development of cost-effective oxygen evolution catalysts is of capital importance for the deployment of large-scale energy-storage systems based on metal-air batteries and reversible fuel cells. In this direction, a wide range of materials have been explored, especially under more favorable alkaline conditions, and several metal chalcogenides have particularly demonstrated excellent performances. However, chalcogenides are thermodynamically less stable than the corresponding oxides and hydroxides under oxidizing potentials in alkaline media. Although this instability in some cases has prevented the application of chalcogenides as oxygen evolution catalysts and it has been disregarded in some others, we propose to use it in our favor to produce high-performance oxygen evolution catalysts. We characterize here the in situ chemical, structural, and morphological transformation during the oxygen evolution reaction (OER) in alkaline media of CuS into CuO nanowires, mediating the intermediate formation of Cu(OH). We also test their OER activity and stability under OER operation in alkaline media and compare them with the OER performance of Cu(OH) and CuO nanostructures directly grown on the surface of a copper mesh. We demonstrate here that CuO produced from in situ electrochemical oxidation of CuS displays an extraordinary electrocatalytic performance toward OER, well above that of CuO and Cu(OH) synthesized without this transformation.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A low temperature solid state reaction to produce hollow MnxFe3-xO4 nanoparticles as anode for lithium-ion batteries

  • Yu, Xiaoting|||0000-0003-0457-4047
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Luo, Zhishan|||0000-0002-0801-9238
  • Zhang, Ting|||0000-0002-0317-9662
  • Liu, Junfeng|||0000-0003-3164-6472
  • Li, Junshan|||0000-0002-1482-1972
  • Zuo, Yong|||0000-0003-1564-467X
  • Jacas Biendicho, Jordi|||0000-0001-5981-6168
  • Llorca, Jordi|||0000-0002-7447-9582
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Hollow MnFeO nanoparticles (NPs) with an average size of 15 nm are produced from the solid state reaction of FeO-MnO heterostructures. These heterostructures are synthesized through the seeded-growth of MnO crystal domains on the surface of hollow FeO NPs obtained by the nanoscale Kirkendall effect. FeO-MnO heterostructures are subsequently annealed at 500 °C, enough temperature to promote the interfusion of Fe and Mn ions, but without compromising the hollow geometry. MnFeO nanostructures are tested as anode in lithium-ion batteries (LIBs), delivering large lithium storage capacities and high-rate capabilities of 1054 mAh g at 0.1 A g and 369 mAh g at 5 A g. Additionally, hollow MnFeO NPs display long cycling stability, with a capacity up to 887 mAh g at 0.3 A g after 450 cycles. The excellent performance of hollow MnFeO NPs as anode for LIBs is associated with their crystal structure, composition, and the presence of carbonized ligands, which further promote electrical conductivity and buffer the volume changes during cycling. Additionally, the small particle size and hollow morphology improves the lithium kinetics, structural stability and cycling performance.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Hollow PdAg-CeO2 heterodimer nanocrystals as highly structured heterogeneous catalysts

  • Patarroyo, Javier|||0000-0002-3703-666X
  • Delgado, Jorge A.
  • Merkoçi, Florind|||0000-0002-4925-5317
  • Genç, Aziz|||0000-0002-2888-2549
  • Sauthier, Guillaume|||0000-0003-3566-3878
  • Llorca, Jordi|||0000-0002-7447-9582
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Bastús, Neus G.|||0000-0002-3144-7986
  • Godard, Cyril
  • Claver, Carmen
  • Puntes, Víctor|||0000-0001-8996-9499
In the present work, hollow PdAg-CeO heterodimer nanocrystals (NCs) were prepared and tested as catalysts for the selective hydrogenation of alkynes. These nanostructures combine for the first time the beneficial effect of alloying Pd with Ag in a single NC hollow domain with the formation of active sites at the interface with the CeO counterpart in an additive manner. The PdAg-CeO NCs display excellent alkene selectivity for aliphatic alkynes. For the specific case of hydrogenation of internal alkynes such as 4-octyne, very low over-hydrogenation and isomerization products were observed over a full conversion regime, even after prolonged reaction times. These catalytic properties were remarkably superior in comparison to standard catalysts. The promotion of Ag on the moderation of the reactivity of the Pd phase, in combination with the creation of interfacial sites with the CeO moiety in the same nanostructure, is pointed as the responsible of such a remarkable catalytic performance.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Water-mediated photo-induced reduction of platinum films

  • Fraxedas, Jordi|||0000-0002-2821-4831
  • Zhang, Kuan
  • Sepúlveda, Borja|||0000-0002-1562-7602
  • Esplandiu Egido, Maria José|||0000-0003-2079-0639
  • Garcia, Xènia|||0000-0003-0795-4168
  • Llorca, Jordi|||0000-0002-7447-9582
  • Pérez-Dieste, Virginia
  • Escudero, Carlos|||0000-0001-8716-9391
Platinum thin films activated ex situ by oxygen plasma become reduced by the combined effect of an intense soft X-ray photon beam and condensed water. The evolution of the electronic structure of the surface has been characterized by near-ambient-pressure photoemission and mimics the inverse two-step sequence observed in the electro-oxidation of platinum, i.e. the surface-oxidized platinum species are reduced first and then the adsorbed species desorb in a second step leading to a surface dominated by metallic platinum. The comparison with measurements performed under high-vacuum conditions suggests that the reduction process is mainly induced by the reactive species generated by the radiolysis of water. When the photon flux is decreased, then the reduction process becomes slower.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

SnS2/g-C3N4/graphite nanocomposites as durable lithium-ion battery anode with high pseudocapacitance contribution

  • Zuo, Yong|||0000-0003-1564-467X
  • Xu, Xijun
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Li, Junshan|||0000-0002-1482-1972
  • Du, Ruifeng
  • Wang, Xiang
  • Han, Xu|||0000-0001-8319-8830
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Liu, Jun|||0000-0001-5288-3042
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Tin disulfide is a promising anode material for Li-ion batteries (LIB) owing to its high theoretical capacity and the abundance of its composing elements. However, bare SnS suffers from low electrical conductivity and large volume expansion, which results in poor rate performance and cycling stability. Herein, we present a solution-based strategy to grow SnS nanostructures within a matrix of porous g-CN (CN) and high electrical conductivity graphite plates (GPs). We test the resulting nanocomposite as anode in LIBs. First, SnS nanostructures with different geometries are tested, to find out that thin SnS nanoplates (SnS-NPLs) provide the highest performances. Such SnS-NPLs, incorporated into hierarchical SnS/CN/GP nanocomposites, display excellent rate capabilities (536.5 mA h g at 2.0 A g) and an outstanding stability (∼99.7% retention after 400 cycles), which are partially associated with a high pseudocapacitance contribution (88.8% at 1.0 mV s). The excellent electrochemical properties of these nanocomposites are ascribed to the synergy created between the three nanocomposite components: i) thin SnS-NPLs provide a large surface for rapid Li-ion intercalation and a proper geometry to stand volume expansions during lithiation/delithiation cycles; ii) porous CN prevents SnS-NPLs aggregation, habilitates efficient channels for Li-ion diffusion and buffer stresses associated to SnS volume changes; and iii) conductive GPs allow an efficient charge transport.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Tin selenide molecular precursor for the solution processing of thermoelectric materials and devices

  • Zhang, Yu|||0000-0002-0332-0013
  • Liu, Yu|||0000-0001-7313-6740
  • Xing, Congcong|||0000-0001-7674-6720
  • Zhang, Ting|||0000-0002-0317-9662
  • Li, Mengyao|||0000-0002-9082-7938
  • Pacios Pujadó, Merce|||0000-0002-3559-4561
  • Yu, Xiaoting|||0000-0003-0457-4047
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Cadavid, Doris|||0000-0002-1376-6078
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
In the present work, we report a solution-based strategy to produce crystallographically textured SnSe bulk nanomaterials and printed layers with optimized thermoelectric performance in the direction normal to the substrate. Our strategy is based on the formulation of a molecular precursor that can be continuously decomposed to produce a SnSe powder or printed into predefined patterns. The precursor formulation and decomposition conditions are optimized to produce pure phase 2D SnSe nanoplates. The printed layer and the bulk material obtained after hot press displays a clear preferential orientation of the crystallographic domains, resulting in an ultralow thermal conductivity of 0.55 W m-1 K-1 in the direction normal to the substrate. Such textured nanomaterials present highly anisotropic properties with the best thermoelectric performance in plane, i.e., in the directions parallel to the substrate, which coincide with the crystallographic bc plane of SnSe. This is an unfortunate characteristic because thermoelectric devices are designed to create/harvest temperature gradients in the direction normal to the substrate. We further demonstrate that this limitation can be overcome with the introduction of small amounts of tellurium in the precursor. The presence of tellurium allows one to reduce the band gap and increase both the charge carrier concentration and the mobility, especially the cross plane, with a minimal decrease of the Seebeck coefficient. These effects translate into record out of plane ZT values at 800 K.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Monodisperse CoSn and NiSn nanoparticles supported on commercial carbon as anode for lithium- and potassium-ion batteries

  • Li, Junshan|||0000-0002-1482-1972
  • Xu, Xijun
  • Yu, Xiaoting|||0000-0003-0457-4047
  • Han, Xu|||0000-0001-8319-8830
  • Zhang, Ting|||0000-0002-0317-9662
  • Zuo, Yong|||0000-0003-1564-467X
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Yang, Dawei|||0000-0002-3842-8286
  • Wang, Xiang
  • Luo, Zhishan|||0000-0002-0801-9238
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Liu, Jun|||0000-0001-5288-3042
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Monodisperse CoSn and NiSn nanoparticles were prepared in solution and supported on commercial carbon black. The obtained nanocomposites were applied as anodes for Li- and K-ion batteries. CoSn@C delivered stable average capacities of 850, 650, and 500 mAh g-1 at 0.2, 1.0, and 2.0 A g-1, respectively, well above those of commercial graphite anodes. The capacity of NiSn@C retained up to 575 mAh g-1 at a current of 1.0 A g-1 over 200 continuous cycles. Up to 74.5 and 69.7% pseudocapacitance contributions for Li-ion batteries were measured for CoSn@C and NiSn@C, respectively, at 1.0 mV s-1. CoSn@C was further tested in full-cell lithium-ion batteries with a LiFePO4 cathode to yield a stable capacity of 350 mAh g-1 at a rate of 0.2 A g-1. As electrode in K-ion batteries, CoSn@C composites presented a stable capacity of around 200 mAh g-1 at 0.2 A g-1 over 400 continuous cycles, and NiSn@C delivered a lower capacity of around 100 mAh g-1 over 300 cycles.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Selective methanol-to-formate electrocatalytic conversion on branched nickel carbide

  • Li, Junshan|||0000-0002-1482-1972
  • Wei, Ruilin
  • Wang, Xiang
  • Zuo, Yong|||0000-0003-1564-467X
  • Han, Xu|||0000-0001-8319-8830
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Yang, Yaoyue|||0000-0002-4573-9437
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Cui, Chunhua|||0000-0002-2774-1576
A methanol economy will be favored by the availability of low-cost catalysts able to selectively oxidize methanol to formate. This selective oxidation would allow extraction of the largest part of the fuel energy while concurrently producing a chemical with even higher commercial value than the fuel itself. Herein, we present a highly active methanol electrooxidation catalyst based on abundant elements and with an optimized structure to simultaneously maximize interaction with the electrolyte and mobility of charge carriers. In situ infrared spectroscopy combined with nuclear magnetic resonance spectroscopy showed that branched nickel carbide particles are the first catalyst determined to have nearly 100 % electrochemical conversion of methanol to formate without generating detectable CO as a byproduct. Electrochemical kinetics analysis revealed the optimized reaction conditions and the electrode delivered excellent activities. This work provides a straightforward and cost-efficient way for the conversion of organic small molecules and the first direct evidence of a selective formate reaction pathway.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Stability of Pd3Pb nanocubes during electrocatalytic thanol oxidation

  • Yu, Xiaoting|||0000-0003-0457-4047
  • Luo, Zhishan|||0000-0002-0801-9238
  • Zhang, Ting|||0000-0002-0317-9662
  • Tang, PengYi|||0000-0002-2306-095X
  • Li, Junshan|||0000-0002-1482-1972
  • Wang, Xiang
  • Llorca, Jordi|||0000-0002-7447-9582
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Liu, Junfeng|||0000-0003-3164-6472
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Intermetallic PdPb nanocrystals with controlled size and cubic geometry exposing (100) facets are synthesized and tested as electrocatalysts for ethanol oxidation in alkaline media. We observe the ethanol oxidation activity and stability to be size-dependent. The 10 nm PdPb nanocrystals display the highest initial current densities, but after few hundred cycles, the current density of smaller nanocrystals becomes much larger. All of the catalysts exhibit a pronounced current decay during the first 500 s of continuous operation, which is associated with the accumulation of strongly adsorbed reaction intermediates, blocking reaction sites. These adsorbed species can be removed by cycling the catalysts or maintaining them at slightly higher potentials for a short period of time to oxidize and later reduce the Pd surface. Such simple cleaning processes, that can be performed during operation breaks without cell disassembly, is sufficient to effectively remove the poisoning species adsorbed on the surface and recover the electrocatalytic activity.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Phosphorous incorporation in Pd₂Sn alloys for electrocatalytic ethanol oxidation

  • Yu, Xiaoting|||0000-0003-0457-4047
  • Liu, Junfeng|||0000-0003-3164-6472
  • Li, Junshan|||0000-0002-1482-1972
  • Luo, Zhishan|||0000-0002-0801-9238
  • Zuo, Yong|||0000-0003-1564-467X
  • Xing, Congcong|||0000-0001-7674-6720
  • Llorca, Jordi|||0000-0002-7447-9582
  • Nasiou, Déspina
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Pan, Kai
  • Kleinhanns, Tobias
  • Xie, Ying
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Direct ethanol fuel cells (DEFCs) show a huge potential to power future electric vehicles and portable electronics, but their deployment is currently limited by the unavailability of proper electrocatalysis for the ethanol oxidation reaction (EOR). In this work, we engineer a new electrocatalyst by incorporating phosphorous into a palladium-tin alloy and demonstrate a significant performance improvement toward EOR. We first detail a synthetic method to produce Pd₂Sn:P nanocrystals that incorporate 35% of phosphorus. These nanoparticles are supported on carbon black and tested for EOR. Pd₂Sn:P/C catalysts exhibit mass current densities up to 5.03 A mg , well above those of Pd₂Sn/C, Pd₂P/C and Pd/C reference catalysts. Furthermore, a twofold lower Tafel slope and a much longer durability are revealed for the Pd₂Sn:P/C catalyst compared with Pd/C. The performance improvement is rationalized with the aid of density functional theory (DFT) calculations considering different phosphorous chemical environments. Depending on its oxidation state, surface phosphorus introduces sites with low energy OH adsorption and/or strongly influences the electronic structure of palladium and tin to facilitate the oxidation of the acetyl to acetic acid, which is considered the EOR rate limiting step. DFT calculations also points out that the durability improvement of Pd₂Sn:P/C catalyst is associated to the promotion of OH adsorption that accelerates the oxidation of intermediate poisoning CO, reactivating the catalyst surface.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A SnS2 molecular precursor for conformal nanostructured coatings

  • Zuo, Yong|||0000-0003-1564-467X
  • Li, Junshan|||0000-0002-1482-1972
  • Yu, Xiaoting|||0000-0003-0457-4047
  • Du, Ruifeng
  • Zhang, Ting|||0000-0002-0317-9662
  • Wang, Xiang
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
We present a simple, versatile, and scalable procedure to produce SnS nanostructured layers based on an amine/thiol-based molecular ink. The ratios amine/thiol and Sn/S, and the reaction conditions, are systematically investigated to produce phase-pure SnS planar and conformal layers with a tremella-like SnS morphology. Such nanostructured layers are characterized by excellent photocurrent densities. The same strategy can be used to produce SnS-graphene composites by simply introducing graphene oxide (GO) into the initial solution. Conveniently, the solvent mixture is able to simultaneously dissolve the Sn and Se powders and reduce the GO. Furthermore, SnSSe ternary coatings and phase-pure SnSe can be easily produced by simply incorporating proper amounts of Se into the initial ink formulation. Finally, the potential of this precursor ink to produce gram-scale amounts of unsupported SnS is investigated._.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Photodehydrogenation of ethanol over CuO/TiO heterostructures

  • Xing, Congcong|||0000-0001-7674-6720
  • Zhang, Yu|||0000-0002-0332-0013
  • Liu, Yongpeng|||0000-0002-4544-4217
  • Wang, Xiang
  • Li, Junshan|||0000-0002-1482-1972
  • Martínez-Alanis, Paulina R.|||0000-0003-3675-4472
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Guardia, Pablo|||0000-0001-9076-4642
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The photodehydrogenation of ethanol is a sustainable and potentially cost-effective strategy to produce hydrogen and acetaldehyde from renewable resources. The optimization of this process requires the use of highly active, stable and selective photocatalytic materials based on abundant elements and the proper adjustment of the reaction conditions, including temperature. In this work, CuO-TiO type-II heterojunctions with different CuO amounts are obtained by a one-pot hydrothermal method. The structural and chemical properties of the produced materials and their activity toward ethanol photodehydrogenation under UV and visible light illumination are evaluated. The CuO-TiO photocatalysts exhibit a high selectivity toward acetaldehyde production and up to tenfold higher hydrogen evolution rates compared to bare TiO. We further discern here the influence of temperature and visible light absorption on the photocatalytic performance. Our results point toward the combination of energy sources in thermo-photocatalytic reactors as an efficient strategy for solar energy conversion.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Study of Fischer-Tropsch-type reactions on chondritic meteorites

  • Cabedo Soto, Victoria|||0000-0002-6944-9207
  • Llorca, Jordi|||0000-0002-7447-9582
  • Trigo-Rodríguez, J.M.|||0000-0001-8417-702X
  • Rimola, Albert|||0000-0002-9637-4554
Context. How simple organic matter appeared on Earth and the processes by which it transformed into more evolved organic compounds, which ultimately led to the emergence of life, is still an open topic. Different scenarios have been proposed, the main one assumes that simple organic compounds were synthesized, either in the gas phase or on the surfaces of dust grains, during the process of star formation and they were incorporated into larger bodies in the protoplanetary disk. The transformation of these simple organic compounds in more complex forms is still a matter of debate. Recent discoveries have pointed to catalytic properties of dust grains present in the early stellar envelope, which can nowadays be found in the form of chondrites. The significant infall of chondritic meteorites during the early periods of Earth suggests that the same reactions could have taken place in certain environments on the Earth's surface, with conditions more favorable for organic synthesis. Aims. This work attempts to synthesize simple organic molecules, such as hydrocarbons and alcohols via Fischer-Tropsch-type reactions supported by different chondritic materials under early-Earth conditions, to investigate if organic synthesis can likely occur in this environment and to determine what the differences are in selectivity when using different types of chondrites. Methods. Fischer-Tropsch-type reactions are investigated from mixtures of CO and H2 at 1 atm of pressure on the surfaces of different chondritic samples. The different products obtained are analyzed in situ by gas chromatography. Results. Different Fischer-Tropsch reaction products are obtained in quantitative amounts. The formation of alkanes and alkenes being the main processes. The formation of alcohols also takes place in a smaller amount. Other secondary products were obtained in a qualitative way. Conclusions. Chondritic material surfaces have been proven as good supports for the occurrence of organic synthesis. Under certain circumstances during the formation of Earth, they could have produced a suitable environment for these reactions to occur.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Enhanced Thermoelectric Performance of n-Type BiSe Nanosheets through Sn Doping

  • Li, Mengyao|||0000-0002-9082-7938
  • Zhang, Yu|||0000-0002-0332-0013
  • Zhang, Ting|||0000-0002-0317-9662
  • Zuo, Yong|||0000-0003-1564-467X
  • Xiao, Ke
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Liu, Yu|||0000-0001-7313-6740
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The cost-effective conversion of low-grade heat into electricity using thermoelectric devices requires developing alternative materials and material processing technologies able to reduce the currently high device manufacturing costs. In this direction, thermoelectric materials that do not rely on rare or toxic elements such as tellurium or lead need to be produced using high-throughput technologies not involving high temperatures and long processes. BiSe is an obvious possible Te-free alternative to BiTe for ambient temperature thermoelectric applications, but its performance is still low for practical applications, and additional efforts toward finding proper dopants are required. Here, we report a scalable method to produce BiSe nanosheets at low synthesis temperatures. We studied the influence of different dopants on the thermoelectric properties of this material. Among the elements tested, we demonstrated that Sn doping resulted in the best performance. Sn incorporation resulted in a significant improvement to the BiSe Seebeck coefficient and a reduction in the thermal conductivity in the direction of the hot-press axis, resulting in an overall 60% improvement in the thermoelectric figure of merit of BiSe.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Molecular engineering to introduce carbonyl between nickel salophen active sites to enhance electrochemical CO2 reduction to methanol

  • Liang, Zhifu
  • Wang, Jianghao
  • Tang, PengYi|||0000-0002-2306-095X
  • Tang, Weiqiang|||0000-0002-7726-4130
  • Liu, Lijia
  • Shakouri, Mohsen
  • Wang, Xiang
  • Llorca, Jordi|||0000-0002-7447-9582
  • Zhao, Shuangliang
  • Heggen, Marc|||0000-0002-2646-0078
  • Dunin-Borkowski, Rafal E.|||0000-0001-8082-0647
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Wu, Hao Bin
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
The electrochemical reduction of CO to methanol is a potentially cost-effective strategy to reduce the concentration of this greenhouse gas while at the same time producing a value-added chemical. Herein, we detail a highly efficient 2D nickel organic framework containing a large density of highly dispersed salophen NiNO active sites toward electrochemical CORR to methanol. By tuning the ligand environment of the salophen NiNO, the electrocatalytic activity of the material toward CO reduction can be significantly improved. We prove that by introducing a carbonyl group at the ligand environment of the Ni active sites, the electrochemical CO reduction activity is highly promoted and its product selectivity reaches a Faradaic efficiency of 27% toward the production of methanol at - 0.9 V vs RHE. The salophen-based π-d conjugated metal-organic framework presented here thus provides the best performance toward CO reduction to methanol among the previously developed nickel-based electrocatalysts.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Molecular engineering to tune the ligand environment of atomically dispersed nickel for efficient alcohol electrochemical oxidation

  • Liang, Zhifu
  • Jiang, Daochuan
  • Wang, Xiang
  • Shakouri, Mohsen
  • Zhang, Ting|||0000-0002-0317-9662
  • Li, Zhongjun
  • Tang, PengYi|||0000-0002-2306-095X
  • Llorca, Jordi|||0000-0002-7447-9582
  • Liu, Lijia
  • Yuan, Yupeng
  • Heggen, Marc|||0000-0002-2646-0078
  • Dunin-Borkowski, Rafal E.|||0000-0001-8082-0647
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
Atomically dispersed metals maximize the number of catalytic sites and enhance their activity. However, their challenging synthesis and characterization strongly complicates their optimization. Here, the aim is to demonstrate that tuning the electronic environment of atomically dispersed metal catalysts through the modification of their edge coordination is an effective strategy to maximize their performance. This article focuses on optimizing nickel-based electrocatalysts toward alcohol electrooxidation in alkaline solution. A new organic framework with atomically dispersed nickel is first developed. The coordination environment of nickel within this framework is modified through the addition of carbonyl (CO) groups. The authors then demonstrate that such nickel-based organic frameworks, combined with carbon nanotubes, exhibit outstanding catalytic activity and durability toward the oxidation of methanol (CHOH), ethanol (CHCHOH), and benzyl alcohol (CHCHOH); the smaller molecule exhibits higher catalytic performance. These outstanding electrocatalytic activities for alcohol electrooxidation are attributed to the presence of the carbonyl group in the ligand chemical environment, which enhances the adsorption for alcohol, as revealed by density functional theory calculations. The work not only introduces a new atomically dispersed Ni-based catalyst, but also demonstrates a new strategy for designing and engineering high-performance catalysts through the tuning of their chemical environment.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Phase engineering of defective copper selenide toward robust lithium-sulfur batteries, Synergistically enhancement of electrochemical kinetics by phase engineering of defective copper selenide toward robust lithium-sulfur Batteries

  • Yang, Dawei|||0000-0002-3842-8286
  • Li, Mengyao|||0000-0002-9082-7938
  • Zheng, Xuejiao
  • Han, Xu|||0000-0001-8319-8830
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Jacas Biendicho, Jordi|||0000-0001-5981-6168
  • Llorca, Jordi|||0000-0002-7447-9582
  • Wang, Jiaao|||0000-0002-4944-4951
  • Hao, Hongchang|||0000-0003-4190-4105
  • Li, Junshan|||0000-0002-1482-1972
  • Henkelman, Graeme|||0000-0002-0336-7153
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Mitlin, David
  • Chou, Shulei|||0000-0003-1155-6082
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The shuttling of soluble lithium polysulfides (LiPS) and the sluggish Li-S conversion kinetics are two main barriers toward the practical application of lithium-sulfur batteries (LSBs). Herein, we propose the addition of copper selenide nanoparticles at the cathode to trap LiPS and accelerate the Li-S reaction kinetics. Using both computational and experimental results, we demonstrate the crystal phase and concentration of copper vacancies to control the electronic structure of the copper selenide, its affinity toward LiPS chemisorption, and its electrical conductivity. The adjustment of the defect density also allows for tuning the electrochemically active sites for the catalytic conversion of polysulfide. The optimized S/Cu1.8Se cathode efficiently promotes and stabilizes the sulfur electrochemistry, thus improving significantly the LSB performance, including an outstanding cyclability over 1000 cycles at 3 C with a capacity fading rate of just 0.029% per cycle, a superb rate capability up to 5 C, and a high areal capacity of 6.07 mAh cm-2 under high sulfur loading. Overall, the present work proposes a crystal phase and defect engineering strategy toward fast and durable sulfur electrochemistry, demonstrating great potential in developing practical LSBs.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Unveiling the role of counter-anions in amorphous transition metal-based oxygen evolution electrocatalysts

  • Wang, Xiang
  • Han, Xu|||0000-0001-8319-8830
  • Du, Ruifeng
  • Liang, Zhifu
  • Zuo, Yong|||0000-0003-1564-467X
  • Guardia, Pablo|||0000-0001-9076-4642
  • Li, Junshan|||0000-0002-1482-1972
  • Llorca, Jordi|||0000-0002-7447-9582
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Zheng, Renji
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
At the initial stage of the oxygen evolution reaction (OER) most electrocatalysts undergo structural and chemical surface reconstruction. While this reconstruction strongly influences their performance, it is frequently overlooked. Herein, we analyze the role of the oxidized anions, which is particularly neglected in most previous works. We introduce a range of different anionic groups (Cl, CHCOO, NO , SO ) on the surface of an amorphous ZnCoNiO catalyst by a facile proton etching and ion exchange method from a ZIF-8 self-sacrificial template. The structural and chemical properties of the obtained set of materials are thoroughly analysed and correlated with their electrocatalytic performance to study the effect of surface anionic groups, phase transition, metal leaching and defect generation on OER activity. Exploiting the control possibilities provided by the synthesis method here described and employing the uncovered property-performance correlations, the electrocatalyst is optimized. As a result, we produce ZnCoNiO-SO catalysts with outstanding OER performances, including a low overpotential of 252 mV at 10 mA cm with a small Tafel slope of 41.6 mV dec. Furthermore, this catalyst exhibits remarkable stability with negligible overpotential variation for 100 h. The excellent catalytic properties are rationalized using density functional theory calculations, showing that the surface-adsorbed anions, particularly SO , can stabilize the OOH* intermediate, thus enhancing the OER activity. This work offers new insight into the roles of metal leaching and surface-adsorbed anions in the OER progress and facilitates the rational design of highly-efficient electrocatalysts for OER.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Facing seawater splitting challenges by regeneration with Ni-Mo-Fe bifunctional electrocatalyst for hydrogen and oxygen evolution

  • Ros, Carles|||0000-0002-9148-2767
  • Murcia López, Sebastián|||0000-0002-3703-041X
  • Garcia, Xènia|||0000-0003-0795-4168
  • Rosado, Marcos|||0000-0003-3938-9132
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Morante, Joan Ramon|||0000-0002-4981-4633
Hydrogen, produced by water splitting, has been proposed as one of the main green energy vectors of the future if produced from renewable energy sources. However, to substitute fossil fuels, large amounts of pure water are necessary, scarce in many world regions. In this work, we fabricate efficient and earth-abundant electrodes, study the challenges of using real seawater, and propose an electrode regeneration method to face undesired salt deposition. Ni-Mo-Fe trimetallic electrocatalyst is deposited on non-expensive graphitic carbon felts both for hydrogen (HER) and oxygen evolution reactions (OER) in seawater and alkaline seawater. Cl pitting and the chlorine oxidation reaction are suppressed on these substrates and alkalinized electrolyte. Precipitations on the electrodes, mainly CaCO, originating from seawater-dissolved components have been studied, and a simple regeneration technique is proposed to rapidly dissolve undesired deposited CaCO in acidified seawater. Under alkaline conditions, Ni-Mo-Fe-based catalyst is found to reconfigure, under cathodic bias, into Ni-Mo-Fe alloy with a cubic crystalline structure and Ni : Fe(OH) redeposits whereas, under anodic bias, it is transformed into a follicular Ni:FeOOH structure. High productivities over 300 mA cm and voltages down to 1.59 V@10 mA cm for the overall water splitting reaction have been shown, and electrodes are found stable for over 24 h without decay in alkaline seawater conditions and with energy efficiency higher than 61.5 % which makes seawater splitting promising and economically feasible.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Nickel iron diselenide for highly efficient and selective electrocatalytic conversion of methanol to formate

  • Li, Junshan|||0000-0002-1482-1972
  • Xing, Congcong|||0000-0001-7674-6720
  • Zhang, Yu|||0000-0002-0332-0013
  • Zhang, Ting|||0000-0002-0317-9662
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Wu, Qianbao|||0000-0003-3236-8582
  • Yi, Yunan
  • He, Shenglan
  • Llorca, Jordi|||0000-0002-7447-9582
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Cui, Chunhua|||0000-0002-2774-1576
The electro-oxidation of methanol to formate is an interesting example of the potential use of renewable energies to add value to a biosourced chemical commodity. Additionally, methanol electro-oxidation can replace the sluggish oxygen evolution reaction when coupled to hydrogen evolution or to the electroreduction of other biomass-derived intermediates. But the cost-effective realization of these reaction schemes requires the development of efficient and low-cost electrocatalysts. Here, a noble metal-free catalyst, Ni FeSe nanorods, with a high potential for an efficient and selective methanol conversion to formate is demonstrated. At its optimum composition, NiFeSe, this diselenide is able to produce 0.47 mmol cm h of formate at 50 mA cm with a Faradaic conversion efficiency of 99%. Additionally, this noble-metal-free catalyst is able to continuously work for over 50 000 s with a minimal loss of efficiency, delivering initial current densities above 50 mA cm and 2.2 A mg in a 1.0 m KOH electrolyte with 1.0 m methanol at 1.5 V versus reversible hydrogen electrode. This work demonstrates the highly efficient and selective methanol-to-formate conversion on Ni-based noble-metal-free catalysts, and more importantly it shows a very promising example to exploit the electrocatalytic conversion of biomass-derived chemicals.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Temperature-controlled switchable photochromism in solid materials

  • Julià López, Àlex|||0000-0002-3357-8349
  • Hernando, Jordi|||0000-0002-1126-4138
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
  • Gonzalez Monje, Pablo|||0000-0001-8781-8574
  • Sedó Vegara, Josep|||0000-0002-4195-7541
  • Roscini, Claudio|||0000-0002-0157-8934
A novel strategy to achieve thermally switchable photochromism in solid materials is reported, which relies on the preparation of polymeric core-shell capsules containing solutions of photochromic dyes in acidic phase-change materials. Upon changing the phase (solid or liquid) of the encapsulated medium, one of the two photochromic states of the system is selectively stabilized on demand, allowing for reversible interconversion between direct and reverse photochromism when thermally scanning through the melting temperature of the phase-change material. This strategy, which does not require the addition of external agents or chemical modification of the dyes, proved to be general for different spiropyran photochromes and to be applicable to the fabrication of a variety of functional materials by simply embedding the capsules obtained into a solid matrix of choice.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Tubular CoFeP@CN as a Mott-Schottky catalyst with multiple adsorption sites for robust lithium-sulfur batteries

  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Du, Ruifeng
  • Jacas Biendicho, Jordi|||0000-0001-5981-6168
  • Yi, Mingjie
  • Xiao, Ke
  • Yang, Dawei|||0000-0002-3842-8286
  • Zhang, Ting|||0000-0002-0317-9662
  • Wang, Xiang
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Zhou, Yingtang|||0000-0002-8678-295X
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The shuttle effect and the sluggish reaction kinetics of lithium polysulfide (LiPS) seriously compromise the performance of lithium-sulfur batteries (LSBs). To overcome these limitations and enable the fabrication of robust LSBs, here the use of a Mott-Schottky catalyst based on bimetallic phosphide CoFeP nanocrystals supported on carbon nitride tubular nanostructures as sulfur hosts is proposed. Theoretical calculations and experimental data confirm that CoFeP@CN composites are characterized by a suitable electronic structure and charge rearrangement that allows them to act as a Mott-Schottky catalyst to accelerate LiPS conversion. In addition, the tubular geometry of CoFeP@CN composites facilitates the diffusion of Li ions, accommodates volume change during the reaction, and offers abundant lithiophilic/sulfiphilic sites to effectively trap soluble LiPS. Therefore, S@CoFeP@CN electrodes deliver a superior rate performance of 630 mAh g at 5 C, and remarkable cycling stability with 90.44% capacity retention over 700 cycles. Coin cells with high sulfur loading, 4.1 mg cm, and pouch cells with 0.1 Ah capacities are further produced to validate their superior cycling stability. In addition, it is demonstrated here that CoFeP@CN hosts greatly alleviate the often overlooked issues of low energy efficiency and serious self-discharging in LSBs.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A High conductivity 1D π-d conjugated metal-organic framework with efficient polysulfide trapping-diffusion-catalysis in lithium-sulfur batteries, A High conductivity one-dimensional π-d conjugated metal-organic framework with efficient polysulfide trapping-diffusion-catalysis in lithium-sulfur batteries

  • Yang, Dawei|||0000-0002-3842-8286
  • Liang, Zhifu
  • Tang, PengYi|||0000-0002-2306-095X
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Tang, Mingxue|||0000-0002-7282-4100
  • Li, Qizhen
  • Jacas Biendicho, Jordi|||0000-0001-5981-6168
  • Li, Junshan|||0000-0002-1482-1972
  • Heggen, Marc|||0000-0002-2646-0078
  • Dunin-Borkowski, Rafal E.|||0000-0001-8082-0647
  • Xu, Ming
  • Llorca, Jordi|||0000-0002-7447-9582
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Chou, Shulei|||0000-0003-1155-6082
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The shuttling behavior and sluggish conversion kinetics of the intermediate lithium polysulfides (LiPS) represent the main obstructions to the practical application of lithium-sulfur batteries (LSBs). Herein, a 1D π-d conjugated metal-organic framework (MOF), Ni-MOF-1D, is presented as an efficient sulfur host to overcome these limitations. Experimental results and density functional theory calculations demonstrate that Ni-MOF-1D is characterized by a remarkable binding strength for trapping soluble LiPS species. Ni-MOF-1D also acts as an effective catalyst for S reduction during the discharge process and LiS oxidation during the charging process. In addition, the delocalization of electrons in the π-d system of Ni-MOF-1D provides a superior electrical conductivity to improve electron transfer. Thus, cathodes based on Ni-MOF-1D enable LSBs with excellent performance, for example, impressive cycling stability with over 82% capacity retention over 1000 cycles at 3 C, superior rate performance of 575 mAh g at 8 C, and a high areal capacity of 6.63 mAh cm under raised sulfur loading of 6.7 mg cm. The strategies and advantages here demonstrated can be extended to a broader range of π-d conjugated MOFs materials, which the authors believe have a high potential as sulfur hosts in LSBs.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Atomically dispersed Fe in a C2N based catalyst as a sulfur host for efficient lithium-sulfur batteries

  • Liang, Zhifu
  • Yang, Dawei|||0000-0002-3842-8286
  • Tang, PengYi|||0000-0002-2306-095X
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Jacas Biendicho, Jordi|||0000-0001-5981-6168
  • Zhang, Yi
  • Llorca, Jordi|||0000-0002-7447-9582
  • Wang, Xiang
  • Li, Junshan|||0000-0002-1482-1972
  • Heggen, Marc|||0000-0002-2646-0078
  • David, Jérémy|||0000-0003-3219-149X
  • Dunin-Borkowski, Rafal E.|||0000-0001-8082-0647
  • Zhou, Yingtang|||0000-0002-8678-295X
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
Lithium-sulfur batteries (LSBs) are considered to be one of the most promising next generation energy storage systems due to their high energy density and low material cost. However, there are still some challenges for the commercialization of LSBs, such as the sluggish redox reaction kinetics and the shuttle effect of lithium polysulfides (LiPS). Here a 2D layered organic material, CN, loaded with atomically dispersed iron as an effective sulfur host in LSBs is reported. X-ray absorption fine spectroscopy and density functional theory calculations prove the structure of the atomically dispersed Fe/CN catalyst. As a result, Fe/CN-based cathodes demonstrate significantly improved rate performance and long-term cycling stability. Fe/CN-based cathodes display initial capacities up to 1540 mAh g at 0.1 C and 678.7 mAh g at 5 C, while retaining 496.5 mAh g after 2600 cycles at 3 C with a decay rate as low as 0.013% per cycle. Even at a high sulfur loading of 3 mg cm, they deliver remarkable specific capacity retention of 587 mAh g after 500 cycles at 1 C. This work provides a rational structural design strategy for the development of high-performance cathodes based on atomically dispersed catalysts for LSBs.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A direct Z-Scheme for the photocatalytic hydrogen production from a water ethanol mixture on CoTiO3/TiO2 heterostructures, A direct Z-scheme for the photocatalytic hydrogen production from ethanol dehydrogenation on CoTiO3/TiO2 heterostructures

  • Xing, Congcong|||0000-0001-7674-6720
  • Liu, Yongpeng|||0000-0002-4544-4217
  • Zhang, Yu|||0000-0002-0332-0013
  • Wang, Xiang
  • Guardia, Pablo|||0000-0001-9076-4642
  • Yao, Liang
  • Han, Xu|||0000-0001-8319-8830
  • Zhang, Ting|||0000-0002-0317-9662
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Soler, Lluís|||0000-0003-1591-3366
  • Chen, Yufen
  • Sivula, Kevin|||0000-0002-8458-0270
  • Guijarro, Néstor|||0000-0002-3277-8816
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Llorca, Jordi|||0000-0002-7447-9582
Photocatalytic H2 evolution from ethanol dehydrogenation is a convenient strategy to store solar energy in a highly valuable fuel with potential zero net CO2 balance. Herein, we report on the synthesis of CoTiO3/TiO2 composite catalysts with controlled amounts of highly distributed CoTiO3 nanodomains for photocatalytic ethanol dehydrogenation. We demonstrate these materials to provide outstanding hydrogen evolution rates under UV and visible illumination. The origin of this enhanced activity is extensively analyzed. In contrast to previous assumptions, UV-vis absorption spectra and ultraviolet photoelectron spectroscopy (UPS) prove CoTiO3/TiO2 heterostructures to have a type II band alignment, with the conduction band minimum of CoTiO3 below the H2/H+ energy level. Additional steady-state photoluminescence (PL) spectra, time-resolved PL spectra (TRPLS), and electrochemical characterization prove such heterostructures to result in enlarged lifetimes of the photogenerated charge carriers. These experimental evidence point toward a direct Z-scheme as the mechanism enabling the high photocatalytic activity of CoTiO3/TiO2 composites toward ethanol dehydrogenation. In addition, we probe small changes of temperature to strongly modify the photocatalytic activity of the materials tested, which could be used to further promote performance in a solar thermophotocatalytic reactor.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Effect of the annealing atmosphere on crystal phase and thermoelectric properties of copper sulfide

  • Li, Mengyao|||0000-0002-9082-7938
  • Liu, Yu|||0000-0001-7313-6740
  • Zhang, Yu|||0000-0002-0332-0013
  • Han, Xu|||0000-0001-8319-8830
  • Zhang, Ting|||0000-0002-0317-9662
  • Zuo, Yong|||0000-0003-1564-467X
  • Xie, Chenyang
  • Xiao, Ke
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Liu, Junfeng|||0000-0003-3164-6472
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Cu2-xS has become one of the most promising thermoelectric materials for application in the middle-high temperature range. Its advantages include the abundance, low cost, and safety of its elements and a high performance at relatively elevated temperatures. However, stability issues limit its operation current and temperature, thus calling for the optimization of the material performance in the middle temperature range. Here, we present a synthetic protocol for large scale production of covellite CuS nanoparticles at ambient temperature and atmosphere, and using water as a solvent. The crystal phase and stoichiometry of the particles are afterward tuned through an annealing process at a moderate temperature under inert or reducing atmosphere. While annealing under argon results in Cu1.8S nanopowder with a rhombohedral crystal phase, annealing in an atmosphere containing hydrogen leads to tetragonal Cu1.96S. High temperature X-ray diffraction analysis shows the material annealed in argon to transform to the cubic phase at ca. 400 K, while the material annealed in the presence of hydrogen undergoes two phase transitions, first to hexagonal and then to the cubic structure. The annealing atmosphere, temperature, and time allow adjustment of the density of copper vacancies and thus tuning of the charge carrier concentration and material transport properties. In this direction, the material annealed under Ar is characterized by higher electrical conductivities but lower Seebeck coefficients than the material annealed in the presence of hydrogen. By optimizing the charge carrier concentration through the annealing time, Cu2-xS with record figures of merit in the middle temperature range, up to 1.41 at 710 K, is obtained. We finally demonstrate that this strategy, based on a low-cost and scalable solution synthesis process, is also suitable for the production of high performance Cu2-xS layers using high throughput and cost-effective printing technologies.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

NbSe2 meets C2N, a 2D-2D heterostructure catalysts as multifunctional polysulfide mediator in ultra-long-life lithium-sulfur batteries

  • Yang, Dawei|||0000-0002-3842-8286
  • Liang, Zhifu
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Jacas Biendicho, Jordi|||0000-0001-5981-6168
  • Botifoll, Marc|||0000-0002-4876-6393
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Chen, Qiulin
  • Li, Mengyao|||0000-0002-9082-7938
  • Ramon, Alberto
  • Moghaddam, Ahmad Ostovari
  • Llorca, Jordi|||0000-0002-7447-9582
  • Wang, Jiaao|||0000-0002-4944-4951
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Chou, Shulei|||0000-0003-1155-6082
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The shuttle effect and sluggish conversion kinetics of lithium polysulfides (LiPS) hamper the practical application of lithium-sulfur batteries (LSBs). Toward overcoming these limitations, herein an in situ grown CN@NbSe heterostructure is presented with remarkable specific surface area, as a Li-S catalyst and LiPS absorber. Density functional theory (DFT) calculations and experimental results comprehensively demonstrate that CN@NbSe is characterized by a suitable electronic structure and charge rearrangement that strongly accelerates the LiPS electrocatalytic conversion. In addition, heterostructured CN@NbSe strongly interacts with LiPS species, confining them at the cathode. As a result, LSBs cathodes based on CN@NbSe/S exhibit a high initial capacity of 1545 mAh g at 0.1 C. Even more excitingly, CN@NbSe/S cathodes are characterized by impressive cycling stability with only 0.012% capacity decay per cycle after 2000 cycles at 3 C. Even at a sulfur loading of 5.6 mg cm, a high areal capacity of 5.65 mAh cm is delivered. These results demonstrate that CN@NbSe heterostructures can act as multifunctional polysulfide mediators to chemically adsorb LiPS, accelerate Li-ion diffusion, chemically catalyze LiPS conversion, and lower the energy barrier for LiS precipitation/decomposition, realizing the "adsorption-diffusion-conversion" of polysulfides.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

ZnSe/N-doped carbon nanoreactor with multiple adsorption sites for stable lithium-sulfur batteries

  • Yang, Dawei|||0000-0002-3842-8286
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Jacas Biendicho, Jordi|||0000-0001-5981-6168
  • Han, Xu|||0000-0001-8319-8830
  • Liang, Zhifu
  • Du, Ruifeng
  • Li, Mengyao|||0000-0002-9082-7938
  • Li, Junshan|||0000-0002-1482-1972
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Zhou, Yingtang|||0000-0002-8678-295X
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
To commercially realize the enormous potential of lithium-sulfur batteries (LSBs) several challenges remain to be overcome. At the cathode, the lithium polysulfide (LiPS) shuttle effect must be inhibited and the redox reaction kinetics need to be substantially promoted. In this direction, this work proposes a cathode material based on a transition-metal selenide (TMSe) as both adsorber and catalyst and a hollow nanoreactor architecture: ZnSe/N-doped hollow carbon (ZnSe/NHC). It is here demonstrated both experimentally and by means of density functional theory that this composite provides three key benefits to the LSBs cathode: (i) A highly effective trapping of LiPS due to the combination of sulfiphilic sites of ZnSe, lithiophilic sites of NHC, and the confinement effect of the cage-based structure; (ii) a redox kinetic improvement in part associated with the multiple adsorption sites that facilitate the Li diffusion; and (iii) an easier accommodation of the volume expansion preventing the cathode damage due to the hollow design. As a result, LSB cathodes based on S@ZnSe/NHC are characterized by high initial capacities, superior rate capability, and an excellent stability. Overall, this work not only demonstrates the large potential of TMSe as cathode materials in LSBs but also probes the nanoreactor design to be a highly suitable architecture to enhance cycle stability.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

PbS-Pb-Cu xS Composites for Thermoelectric Application

  • Li, Mengyao|||0000-0002-9082-7938
  • Liu, Yu|||0000-0001-7313-6740
  • Zhang, Yu|||0000-0002-0332-0013
  • Han, Xu|||0000-0001-8319-8830
  • Xiao, Ke
  • Nabahat, Mehran|||0000-0002-6109-5782
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Composite materials offer numerous advantages in a wide range of applications, including thermoelectrics. Here, semiconductor-metal composites are produced by just blending nanoparticles of a sulfide semiconductor obtained in aqueous solution and at room temperature with a metallic Cu powder. The obtained blend is annealed in a reducing atmosphere and afterward consolidated into dense polycrystalline pellets through spark plasma sintering (SPS). We observe that, during the annealing process, the presence of metallic copper activates a partial reduction of the PbS, resulting in the formation of PbS-Pb-CuxS composites. The presence of metallic lead during the SPS process habilitates the liquid-phase sintering of the composite. Besides, by comparing the transport properties of PbS, the PbS-Pb-CuxS composites, and PbS-CuxS composites obtained by blending PbS and CuxS nanoparticles, we demonstrate that the presence of metallic lead decisively contributes to a strong increase of the charge carrier concentration through spillover of charge carriers enabled by the low work function of lead. The increase in charge carrier concentration translates into much higher electrical conductivities and moderately lower Seebeck coefficients. These properties translate into power factors up to 2.1 mW m-1 K-2 at ambient temperature, well above those of PbS and PbS + CuxS. Additionally, the presence of multiple phases in the final composite results in a notable decrease in the lattice thermal conductivity. Overall, the introduction of metallic copper in the initial blend results in a significant improvement of the thermoelectric performance of PbS, reaching a dimensionless thermoelectric figure of merit ZT = 1.1 at 750 K, which represents about a 400% increase over bare PbS. Besides, an average ZTave = 0.72 in the temperature range 320-773 K is demonstrated.