Skip to main content

COMBINACION DE FUENTES (DE ENERGIA) PARA OPTIMIZACION DE PROCESOS CATALITICOS EN ENERGIA: PROCESOS TERMO-ELECTRO CATALITICOS

PID2019-105490RB-C32

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2019
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre FUNDACIO INSTITUT DE RECERCA DE L ENERGIA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 40
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Sulfate-Decorated Amorphous-Crystalline Cobalt-Iron Oxide Nanosheets to Enhance O-O Coupling in the Oxygen Evolution Reaction

  • Wang, Xiang
  • Li, Junshan|||0000-0002-1482-1972
  • Xue, Qian
  • Han, Xu|||0000-0001-8319-8830
  • Xing, Congcong|||0000-0001-7674-6720
  • Liang, Zhifu
  • Guardia, Pablo|||0000-0001-9076-4642
  • Zuo, Yong|||0000-0003-1564-467X
  • Du, Ruifeng
  • Balcells i Argemí, Lluís|||0000-0001-6603-7357
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The electrochemical oxygen evolution reaction (OER) plays a fundamental role in several energy technologies, which performance and cost-effectiveness are in large part related to the used OER electrocatalyst. Herein, we detail the synthesis of cobalt-iron oxide nanosheets containing controlled amounts of well-anchored SO42- anionic groups (CoFexOy-SO4). We use a cobalt-based zeolitic imidazolate framework (ZIF-67) as the structural template and a cobalt source and Mohr's salt ((NH4)2Fe(SO4)2·6H2O) as the source of iron and sulfate. When combining the ZIF-67 with ammonium iron sulfate, the protons produced by the ammonium ion hydrolysis (NH4+ + H2O = NH3·H2O + H+) etch the ZIF-67, dissociating its polyhedron structure, and form porous assemblies of two-dimensional nanostructures through a diffusion-controlled process. At the same time, iron ions partially replace cobalt within the structure, and SO42- ions are anchored on the material surface by exchange with organic ligands. As a result, ultrathin CoFexOy-SO4 nanosheets are obtained. The proposed synthetic procedure enables controlling the amount of Fe and SO4 ions and analyzing the effect of each element on the electrocatalytic activity. The optimized CoFexOy-SO4 material displays outstanding OER activity with a 10 mA cm-2 overpotential of 268 mV, a Tafel slope of 46.5 mV dec-1, and excellent stability during 62 h. This excellent performance is correlated to the material's structural and chemical parameters. The assembled nanosheet structure is characterized by a large electrochemically active surface area, a high density of reaction sites, and fast electron transportation. Meanwhile, the introduction of iron increases the electrical conductivity of the catalysts and provides fast reaction sites with optimum bond energy and spin state for the adsorption of OER intermediates. The presence of sulfate ions at the catalyst surface modifies the electronic energy level of active sites, regulates the adsorption of intermediates to reduce the OER overpotential, and promotes the surface charge transfer, which accelerates the formation of oxygenated intermediates. Overall, the present work details the synthesis of a high-efficiency OER electrocatalyst and demonstrates the introduction of nonmetallic anionic groups as an excellent strategy to promote electrocatalytic activity in energy conversion technologies.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Self-supported NiO/CuO electrodes to boost urea oxidation in direct urea fuel cells

  • Yang, Linlin|||0009-0006-9953-5698
  • He, Ren|||0000-0003-3712-5539
  • Wang, Xiang
  • Yang, Tingting
  • Zhang, Ting|||0000-0002-0317-9662
  • Zuo, Yong|||0000-0003-1564-467X
  • Lu, Xuan|||0000-0003-2453-2805
  • Liang, Zhifu
  • Li, Junshan|||0000-0002-1482-1972
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Martínez-Alanis, Paulina R.|||0000-0003-3675-4472
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Direct urea fuel cells (DUFCs) can be used to treat residual wastewater while generating electricity. Herein, self-supported electrodes consisting of NiO nanosheets vertically grown on CuO nanowires are synthesized to realize the urea oxidation reaction (UOR). Such electrodes show excellent UOR performance requiring 1.39 V vs. RHE to achieve 100 mA/cm. Besides, DUFCs provide open circuit voltages and power densities up to 0.88 V and 11.35 mW/cm. Electrochemical characterization and Raman spectroscopy prove the formation of NiOOH to enable the UOR. Mott-Schottky analysis and UV photoelectron spectroscopy show the NiO/CuO p-p heterostructure to facilitate the charge transfer from CuO nanowires to NiO nanosheets. Besides, at a local level, density functional theory calculations show that the presence of CuO modulates the electronic states of Ni at the very NiOOH/CuO interface, which results in stretched Ni-O bonds and a uniquely elongated N-H bond of urea that favors its oxidation.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A CrMnFeCoNi high entropy alloy boosting oxygen evolution/reduction reactions and zinc-air battery performance

  • He, Ren|||0000-0003-3712-5539
  • Yang, Linlin|||0009-0006-9953-5698
  • Zhang, Yu|||0000-0002-0332-0013
  • Wang, Xiang
  • Lee, Seungho|||0000-0002-6962-8598
  • Zhang, Ting|||0000-0002-0317-9662
  • Li, Lingxiao|||0000-0003-1628-2738
  • Liang, Zhifu
  • Chen, Jingwei
  • Li, Junshan|||0000-0002-1482-1972
  • Ostovari Moghaddam, Ahmad|||0000-0002-5316-3773
  • Llorca, Jordi|||0000-0002-7447-9582
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Xu, Ying
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The development of cost-effective, high-activity and stable bifunctional catalysts for the oxygen reduction and evolution reactions (ORR/OER) is essential for zinc-air batteries (ZABs) to reach the market. Such catalysts must contain multiple adsorption/reaction sites to cope with the high demands of reversible oxygen electrodes. Herein, we propose a high entropy alloy (HEA) based on relatively abundant elements as a bifunctional ORR/OER catalyst. More specifically, we detail the synthesis of a CrMnFeCoNi HEA through a low-temperature solution-based approach. Such HEA displays superior OER performance with an overpotential of 265 mV at a current density of 10 mA/cm, and a 37.9 mV/dec Tafel slope, well above the properties of a standard commercial catalyst based on RuO. This high performance is partially explained by the presence of twinned defects, the incidence of large lattice distortions, and the electronic synergy between the different components, being Cr key to decreasing the energy barrier of the OER rate-determining step. CrMnFeCoNi also displays superior ORR performance with a half-potential of 0.78 V and an onset potential of 0.88 V, comparable with commercial Pt/C. The potential gap (Egap) between the OER overpotential and the ORR half-potential of CrMnFeCoNi is just 0.734 V. Taking advantage of these outstanding properties, ZABs are assembled using the CrMnFeCoNi HEA as air cathode and a zinc foil as the anode. The assembled cells provide an open-circuit voltage of 1.489 V, i.e. 90% of its theoretical limit (1.66 V), a peak power density of 116.5 mW/cm, and a specific capacity of 836 mAh/g that stays stable for more than 10 days of continuous cycling, i.e. 720 cycles @ 8 mA/cm and 16.6 days of continuous cycling, i.e. 1200 cycles @ 5 mA/cm.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Controllable Synthesis of Defective TiO2 Nanorods for Efficient Hydrogen Production

  • Xing, Congcong|||0000-0001-7674-6720
  • Yang, Linlin|||0009-0006-9953-5698
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Zhang, Yu|||0000-0002-0332-0013
  • Guardia, Pablo|||0000-0001-9076-4642
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Liu, Tianqi|||0000-0002-0672-9965
  • Fan, Xiaolei|||0000-0002-9039-6736
  • Fernández-García, Marcos|||0000-0002-9987-0289
  • Llorca, Jordi|||0000-0002-7447-9582
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Nanorods (NRs), with their high atomic surface exposure within a crystalline architecture, facilitate effective diffusion/transport of charge, rendering them particularly suitable for applications requiring both interaction with the media and charge transfer. In this study, we present a straightforward approach to produce brookite-phase titanium dioxide (TiO) NRs with tunable defects and narrow size distributions by utilizing methylamine hydrochloride and 1,2-hexadecanediol as shape-directing agents. The presence of the Ti defect was confirmed by electron paramagnetic resonance and X-ray photoelectron spectroscopy, and its effect on the photocatalytic properties of TiO, with and without Pt loading, show that the longest TiO NRs provide the highest photocatalytic and photoelectrochemical hydrogen production activity. Transient photocurrent response analysis, electrochemical impedance spectroscopy, and Mott-Schottky analysis plots indicate that an increase in temperature significantly reduces the interface barrier and lowers the transport resistance, leading to a 104% improvement in hydrogen production rates from 25 to 60 °C for the longest TiO NRs. This study underscores the critical role of the TiO nanorod dimensions (18-45 nm) in elevating the hydrogen production efficiency. At 25 °C, rates surged from 1.6 to 2.6 mmol g h, and at 60 °C, rates soared from 3.3 to 5.3 mmol g h, demonstrating the substantial impact of TiO NRs on enhancing hydrogen generation.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Photodehydrogenation of ethanol over cu2o/tio2 heterostructures

  • Xing, Congcong
  • Zhang, Yu
  • Liu, Yongpeng
  • Wang, Xiang
  • Li, Junshan
  • Martínez-Alanis, Paulina R.
  • Spadaro, Maria Chiara
  • Guardia, Pablo
  • Arbiol, Jordi
  • Llorca, Jordi
  • Cabot, Andreu
The photodehydrogenation of ethanol is a sustainable and potentially cost-effective strategy to produce hydrogen and acetaldehyde from renewable resources. The optimization of this process requires the use of highly active, stable and selective photocatalytic materials based on abundant elements and the proper adjustment of the reaction conditions, including temperature. In this work, CuO-TiO type-II heterojunctions with different CuO amounts are obtained by a one-pot hydrothermal method. The structural and chemical properties of the produced materials and their activity toward ethanol photodehydrogenation under UV and visible light illumination are evaluated. The CuO-TiO photocatalysts exhibit a high selectivity toward acetaldehyde production and up to tenfold higher hydrogen evolution rates compared to bare TiO . We further discern here the influence of temperature and visible light absorption on the photocatalytic performance. Our results point toward the combination of energy sources in thermo-photocatalytic reactors as an efficient strategy for solar energy conversion., This work was supported by the MINECO project COMBENERGY (PID2019-105490RB-C32) and MICINN/FEDER project RTI2018-093996-B-C31. J.A. and M.C.S. thank funding from GC 2017 SGR 327 and MINECO project (ENE2017-85087-C3). ICN2 thanks supporting from the Severo Ochoa Program (MINECO, No. SEV-2013-0295) and the CERCA Program/Generalitat de Catalunya. Y.Z., C.X., and X.W. acknowledge the China Scholarship Council (CSC) for scholarship support. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. J.L. is a Serra Hunter fellow and is grateful to GC 2017 SGR 128 and ICREA Academia program. Y.L. thank the Swiss National Science Foundation (SNF) for funding under the Ambizione Energy (No. PZENP2_166871). M.C.S. has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 754510 (PROBIST) and the Severo Ochoa programme.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A novel π-d conjugated cobalt tetraaza[14]annulene based atomically dispersed electrocatalyst for efficient CO2 reduction

  • Liang, Zhifu
  • Zhang, Ting
  • Cao, Pengfei
  • Yoshida, Takefumin
  • Tang, Weiqiang
  • Wang, Xiang
  • Zuo, Yong
  • Tang, Peng-Yi
  • Heggen, Marc
  • Dunin-Borkowski, Rafal E.
  • Morante, Joan Ramón
  • Cabot, Andreu
  • Yamashita, Masahiro
  • Arbiol, Jordi
Tetraaza[14]annulenes (TAA) are synthetic macrocycles which are analogue to porphyrins. However, there are almost no reports about the synthesis of polymers based on TAA and neither on their use as electrocatalysts. The study of new catalysts to promote an efficient electrochemical conversion of carbon dioxide to valuable chemicals is a promising approach to relieve the pressure of carbon emissions and realize the carbon cycle. Herein, we first report the synthesis of a novel tetraaza[14]annulene (TAA) based organic polymeric metal complex (PMC) by a non-template method. This PMC is used as ligand to construct a π-d conjugated cobalt coordination polymer (Poly-TAA-Co) with CoN structure which is supported on multi-wall carbon nanotubes (CNTs) to work as an atomically dispersed efficient electrocatalyst for the CO reduction reaction (CORR). The resulting catalyst (Poly-TAA-Co-CNT) exhibits excellent performance, with a 90% CO faradaic efficiency, a low overpotential (390 mV) and good stability in 0.5 M KHCO aqueous solution. Density functional theory calculations confirmed that the cobalt tetra[14]annulene is an excellent active site for electrocatalytic CORR. This work not only inspires the design of novel TAA based macromolecules, but also paves the way to the development and application of new molecular-based catalysts for electrocatalytic CORR., The present work is supported by the projects SEHTOP, ENE2016-77798-C4-3-R, COMBENERGY (PID2019-105490RB-C32) and NANOGEN (PID2020-116093RB-C43), funded by MCIN/ AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. This study was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and the Government of Catalonia. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706) and ICN2 and IREC are funded by the CERCA Programme /Generalitat de Catalunya. Part of the present work has been performed in the of the Universitat Autònoma de Barcelona Materials Science PhD program. Z.F Liang acknowledges funding from MINECO SO-FPT PhD grant (SEV-2013-0295-17-1). X. Wang and T. Zhang thank the China Scholarship Council, China, for the scholarship support. W. Tang thanks China Postdoctoral Science Foundation (Nos.2021M691008). Authors acknowledge funding from Generalitat de Catalunya 2017SGR327 and 2017SGR1246. This research was supported by JSPS KAKENHI Grant Numbers JP20K15293 (TY)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

MOF-Derived Ultrathin Cobalt Molybdenum Phosphide Nanosheets for Efficient Electrochemical Overall Water Splitting

  • Wang, Xiang
  • Yang, Linlin
  • Xing, Congcong
  • Han, Xu
  • Du, Ruifeng
  • He, Ren
  • Guardia, Pablo
  • Arbiol, Jordi
  • Cabot, Andreu
The development of high-performance and cost-effective earth-abundant transition metal-based electrocatalysts is of major interest for several key energy technologies, including water splitting. Herein, we report the synthesis of ultrathin CoMoP nanosheets through a simple ion etching and phosphorization method. The obtained catalyst exhibits outstanding electrocatalytic activity and stability towards oxygen and hydrogen evolution reactions (OER and HER), with overpotentials down to 273 and 89 mV at 10 mA cm, respectively. The produced CoMoP nanosheets are also characterized by very small Tafel slopes, 54.9 and 69.7 mV dec for OER and HER, respectively. When used as both cathode and anode electrocatalyst in the overall water splitting reaction, CoMoP-based cells require just 1.56 V to reach 10 mA cm in alkaline media. This outstanding performance is at-tributed to the proper composition, weak crystallinity and two-dimensional nanosheet structure of the electrocatalyst., This research was partially funded by the project Combenergy, PID2019-105490RB-C32, from the Spanish Ministerio de Ciencia e Innovación. X.W., L.Y., C.X., X.H. and R.D. thank the China Scholarship Council (CSC) for the scholarship support. IREC is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the frameworks of Universitat de Barcelona Nanoscience Ph.D. program. ICN2 acknowledges funding from Generalitat de Catalunya 2017 SGR 327. The authors thank the support from the project NANOGEN (PID2020-116093RB-C43), funded by MCIN/AEI/10.13039/501100011033/. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science Ph.D. program.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Molecular engineering to introduce carbonyl between nickel salophen active sites to enhance electrochemical CO2 reduction to methanol

  • Liang, Zhifu
  • Wang, Jianghao
  • Tang, Peng-Yi
  • Tang, Weiqiang
  • Liu, Lijia
  • Shakouri, Mohsen
  • Wang, Xiang
  • Llorca, Jordi
  • Zhao, Shuangliang
  • Heggen, Marc
  • Dunin-Borkowski, Rafal E.
  • Cabot, Andreu
  • Wu, Hao Bin
  • Arbiol, Jordi
The electrochemical reduction of CO to methanol is a potentially cost-effective strategy to reduce the concentration of this greenhouse gas while at the same time producing a value-added chemical. Herein, we detail a highly efficient 2D nickel organic framework containing a large density of highly dispersed salophen NiNO active sites toward electrochemical CORR to methanol. By tuning the ligand environment of the salophen NiNO, the electrocatalytic activity of the material toward CO reduction can be significantly improved. We prove that by introducing a carbonyl group at the ligand environment of the Ni active sites, the electrochemical CO reduction activity is highly promoted and its product selectivity reaches a Faradaic efficiency of 27% toward the production of methanol at − 0.9 V vs RHE. The salophen-based π-d conjugated metal-organic framework presented here thus provides the best performance toward CO reduction to methanol among the previously developed nickel-based electrocatalysts., ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. Z. Liang acknowledges funding from MINECO SO-FPT PhD grant (SEV-2013-0295-17-1). This project has received funding from the European Union’s Horizon 2020 Research and Innovation Programme under grant agreement No 823717-ESTEEM3. The present work is supported by the I+D+I projects PID2019-105490RB-C32 and NANOGEN (PID2020-116093RB-C43), funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. X. Wang thanks the China Scholarship Council for the scholarship support. P. Tang acknowledges the Humboldt Research Fellowship. Authors acknowledge funding from Generalitat de Catalunya 2017SGR327 and 2017SGR1246. L. L acknowledges the support from Natural Sciences and Engineering Research Council Canada (NSERC, DG RGPIN-2020-06675). J. Llorca is a Serra Húnter Fellow and is grateful to MICINN/FEDER RTI2018-093996-B-C31, GC 2017 SGR 128 and to ICREA Academia Program. XAFS measurements were performed at the Canadian Light Source, a national research facility at the University of Saskatchewan, which is supported by the Canada Foundation for Innovation (CFI), the Natural Sciences and Engineering Research Council (NSERC), the National Research Council (NRC), the Canadian Institutes of Health Research (CIHR), the Government of Saskatchewan, and the University of Saskatchewan. W. Tang acknowledges the Chinese Postdoctoral Science Foundation (Nos. 2021M691008).This study was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and Generalitat de Catalunya.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Controlled oxygen doping in highly dispersed Ni-loaded g-C3N4 nanotubes for efficient photocatalytic H2O2 production

  • Du, Ruifeng
  • Xiao, Ke
  • Li, Baoying
  • Han, Xu
  • Zhang, Chaoqi
  • Wang, Xiang
  • Zuo, Yong
  • Guardia, Pablo
  • Li, Junshan
  • Chen, Jianbin
  • Arbiol, Jordi
  • Cabot, Andreu
Hydrogen peroxide (HO) is both a key component in several industrial processes and a promising liquid fuel. The production of HO by solar photocatalysis is a suitable strategy to convert and store solar energy into chemical energy. Here we report an oxygen-doped tubular g-CN with uniformly dispersed nickel nanoparticles for efficient photocatalytic HO generation. The hollow structure of the tubular g-CN provides a large surface with a high density of reactive sites and efficient visible light absorption during the photocatalytic reaction. The oxygen doping and Ni loading enable a fast separation of photogenerated charge carriers and a high selectivity toward the two-electron process during the oxygen reduction reaction (ORR). The optimized composition, Ni/OtCN, displays an HO production rate of 2464 μmol g·h, which is eightfold higher than that of bulk g-CN under visible light irradiation (λ > 420 nm), and achieves an apparent quantum yield (AQY) of 28.2% at 380 nm and 14.9% at 420 nm., IREC and ICN2 acknowledge funding from Generalitat de Catalunya, projects 2017 SGR 1246 and 2017 SGR 327, respectively. The authors thank the support from the project COMBENERY (PID2019-105490RB-C32) and NANOGEN (PID2020-116093RB-C43), funded by MCIN/ AEI/10.13039/501100011033/. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706) and is funded by the CERCAProgramme / Generalitat de Catalunya. Baoying Li and Jianbin Chen greatly appreciate the financial support from the National Natural Science Foundation of China (Nos. 22171154 & 21801144), the Youth Innovative Talents Recruitment and Cultivation Program of Shandong Higher Education, The Project Supported by the Foundation (No. ZZ20190312) of State Key Laboratory of Biobased Material and Green Papermaking, Qilu University of Technology (Shandong Academy of Sciences)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Spin Effect to Promote Reaction Kinetics and Overall Performance of Lithium-Sulfur Batteries under External Magnetic Field

  • Zhang, Chao Yue
  • Zhang, Chaoqi
  • Sun, Guo Wen
  • Pan, Jiang Long
  • Gong, Li
  • Sun, Geng Zhi
  • Biendicho, Jordi Jacas
  • Balcells, Lluis
  • Fan, Xiao Long
  • Morante, Joan Ramón
  • Zhou, Jin Yuan
  • Cabot, Andreu
Lithium-sulfur batteries (LSBs) are still limited by the shuttle of lithium polysulfides (LiPS) and the slow Li-S reaction. Herein, we demonstrate that when using cobalt sulfide as a catalytic additive, an external magnetic field generated by a permanent magnet can significantly improve the LiPS adsorption ability and the Li-S reaction kinetics. More specifically, the results show both experimentally and theoretically how an electron spin polarization of Co ions reduces electron repulsion and enhances the degree of orbital hybridization, thus resulting in LSBs with unprecedented performance and stability. Under an external magnetic field, LSBs with 0.0084 % per cycle decay rate at 2 C during 8150 cycles are produced. Overall, this work not only demonstrates an effective strategy to promote LiPS adsorption and electrochemical conversion in LSBs at no additional energy cost but also enriches the application of the spin effect in the electrocatalysis fields., This work was supported by the National Natural Science Foundation of China (Grant Nos.: 51572118 and 21975123) and partially by the Fundamental Research Funds for the Central Universities (Grant Nos.: lzujbky-2021-it33). C. Y. Zhang, C. Q. Zhang, and L. Gong thank the China Scholarship Council for the scholarship support. A. Cabot thanks financial support from the Combenergy project (PID2019-105490RB-C32) from the Spanish Ministerio de Ciencia e Innovación. The authors also greatly acknowledge the support supported by the Supercomputing Center of Lanzhou University, China., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Cobalt molybdenum nitride-based nanosheets for seawater splitting

  • Wang, Xiang
  • Han, Xu
  • Du, Ruifeng
  • Xing, Congcong
  • Qi, Xueqiang
  • Liang, Zhifu
  • Guardia, Pablo
  • Arbiol, Jordi
  • Cabot, Andreu
  • Li, Junshan
The development of cost-effective bifunctional catalysts for water electrolysis is both a crucial necessity and an exciting scientific challenge. Herein, a simple approach based on a metal–organic framework sacrificial template to preparing cobalt molybdenum nitride supported on nitrogen-doped carbon nanosheets is reported. The porous structure of produced composite enables fast reaction kinetics, enhanced stability, and high corrosion resistance in critical seawater conditions. The cobalt molybdenum nitride-based electrocatalyst is tested toward both oxygen evolution reaction and hydrogen evolution reaction half-reactions using the seawater electrolyte, providing excellent performances that are rationalized using density functional theory. Subsequently, the nitride composite is tested as a bifunctional catalyst for the overall splitting of KOH-treated seawater from the Mediterranean Sea. The assembled system requires overpotentials of just 1.70 V to achieve a current density of 100 mA cm–2 in 1 M KOH seawater and continuously works for over 62 h. This work demonstrates the potential of transition-metal nitrides for seawater splitting and represents a step forward toward the cost-effective implementation of this technology., X.W., X.H., R.D., and C.X. thank the China Scholarship Council (CSC) for the scholarship support. ICN2 acknowledges funding from Generalitat de Catalunya 2017 SGR 327. The authors thank the support from the Spanish MCIN project COMBENERGY (PID2019-105490RB-C32) and NANOGEN (PID2020-116093RB-C43), funded by MCIN/AEI/10.13039/501100011033/. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (grant no. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. Z.L. acknowledges funding from the MINECO SO FPI PhD grant (SEV-2013-0295-17-1). This work was supported by Natural Science Foundation of Sichuan province (2022NSFSC1229)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electrochemical conversion of alcohols into acidic commodities on nickel sulfide nanoparticles

  • Li, Junshan
  • Tian, Xi
  • Wang, Xiang
  • Zhang, Ting
  • Spadaro, Maria Chiara
  • Arbiol, Jordi
  • Li, Luming
  • Zuo, Yong
  • Cabot, Andreu
The electrocatalytic oxidation of alcohols is a potentially cost-effective strategy for the synthesis of valuable chemicals at the anode while simultaneously generating hydrogen at the cathode. For this approach to become commercially viable, high-activity, low-cost, and stable catalysts need to be developed. Herein, we demonstrate an electrocatalyst based on earth-abundant nickel and sulfur elements. Experimental investigations reveal the produced NiS displays excellent electrocatalytic performance associated with a higher electrochemical surface area (ECSA) and the presence of sulfate ions on the formed NiOOH surface in basic media. The current densities reached for the oxidation of ethanol and methanol at 1.6 V vs reversible hydrogen electrode (RHE) are up to 175.5 and 145.1 mA cm–2, respectively. At these high current densities, the Faradaic efficiency of methanol to formate conversion is 98% and that of ethanol to acetate is 81%. Density functional theory calculations demonstrate the presence of the generated sulfate groups to modify the electronic properties of the NiOOH surface, improving electroconductivity and electron transfer. Besides, calculations are used to determine the reaction energy barriers, revealing the dehydrogenation of ethoxy groups to be more favorable than that of methoxy on the catalyst surface, which explains the highest current densities obtained for ethanol oxidation., This work was supported by the start-up funding at Chengdu University and the Natural Science Foundation of Sichuan (NSFSC) project funded by the Science and Technology Department of Sichuan Province (2022NSFSC1229). It was also supported by the European Regional Development Funds and by the Spanish Ministerio de Ciencia e Innovación through the project COMBENERGY (PID2019-105490RB-C32). T.Z. is grateful to the China Scholarship Council (CSC) for scholarship support. T.Z., M.C.S., and J.A. acknowledge funding from Generalitat de Catalunya 2017 SGR 327. ICN2 acknowledges support from the Severo Ochoa Programme (MINECO, Grant no. SEV-2013-0295). T.Z. has received funding from the CSC-UAB PhD scholarship program. M.C.S. has received funding from the postdoctoral fellowship Juan de la Cierva from MICINN (IJCI-2019) and the Severo Ochoa programme. ICN2 authors thank support from the project NANOGEN (PID2020-116093RB-C43), funded by MCIN/ AEI/10.13039/501100011033/. IREC and ICN2 are funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. This study was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Sulfate-Decorated Amorphous-Crystalline Cobalt-Iron Oxide Nanosheets to Enhance O-O Coupling in the Oxygen Evolution Reaction

  • Wang, Xiang
  • Li, Junshan
  • Xue, Qian
  • Han, Xu
  • Xing, Congcong
  • Liang, Zhifu
  • Guardia, Pablo
  • Zuo, Yong
  • Du, Ruifeng
  • Balcells, Lluis
  • Arbiol, Jordi
  • Llorca, Jordi
  • Qi, Xueqiang
  • Cabot, Andreu
The electrochemical oxygen evolution reaction (OER) plays a fundamental role in several energy technologies, which performance and cost-effectiveness are in large part related to the used OER electrocatalyst. Herein, we detail the synthesis of cobalt-iron oxide nanosheets containing controlled amounts of well-anchored SO42- anionic groups (CoFexOy-SO4). We use a cobalt-based zeolitic imidazolate framework (ZIF-67) as the structural template and a cobalt source and Mohr's salt ((NH4)2Fe(SO4)2·6H2O) as the source of iron and sulfate. When combining the ZIF-67 with ammonium iron sulfate, the protons produced by the ammonium ion hydrolysis (NH4+ + H2O = NH3·H2O + H+) etch the ZIF-67, dissociating its polyhedron structure, and form porous assemblies of two-dimensional nanostructures through a diffusion-controlled process. At the same time, iron ions partially replace cobalt within the structure, and SO42- ions are anchored on the material surface by exchange with organic ligands. As a result, ultrathin CoFexOy-SO4 nanosheets are obtained. The proposed synthetic procedure enables controlling the amount of Fe and SO4 ions and analyzing the effect of each element on the electrocatalytic activity. The optimized CoFexOy-SO4 material displays outstanding OER activity with a 10 mA cm-2 overpotential of 268 mV, a Tafel slope of 46.5 mV dec-1, and excellent stability during 62 h. This excellent performance is correlated to the material's structural and chemical parameters. The assembled nanosheet structure is characterized by a large electrochemically active surface area, a high density of reaction sites, and fast electron transportation. Meanwhile, the introduction of iron increases the electrical conductivity of the catalysts and provides fast reaction sites with optimum bond energy and spin state for the adsorption of OER intermediates. The presence of sulfate ions at the catalyst surface modifies the electronic energy level of active sites, regulates the adsorption of intermediates to reduce the OER overpotential, and promotes the surface charge transfer, which accelerates the formation of oxygenated intermediates. Overall, the present work details the synthesis of a high-efficiency OER electrocatalyst and demonstrates the introduction of nonmetallic anionic groups as an excellent strategy to promote electrocatalytic activity in energy conversion technologies., The authors thank the support from the projects Combenergy (PID2019-105490RB-C32) from the Spanish Ministerio de Ciencia e Innovación, ENE2016-77798-C4-3-R and NANOGEN (PID2020-116093RB-C43), funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. The authors also thank the Spanish Ministry of Science and Innovation through the Severo Ochoa (CEX2019-000917-S) and OXISOT (PID2021- 128410OB-I00) projects. X.W., X.H., C.X., and R.D. thank the China Scholarship Council (CSC) for the scholarship support. The authors acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and 2017 SGR 1246. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S). IREC and ICN2 are funded by the CERCA Programme/Generalitat de Catalunya. Z.L. acknowledges funding from MINECO SO-FPT Ph.D. grant (SEV-2013-0295-17-1). J.L. is a Serra Húnter Fellow and is grateful to MICINN/FEDER PID2021-124572OB-C31, GC 2017 SGR 128 and ICREA Academia program. Part of the present work has been performed in the frameworks of Universitat de Barcelona Nanoscience Ph.D. program and Universitat Autònoma de Barcelona Materials Science Ph.D. program., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Sodium-Sulfur Batteries with Unprecedented Capacity, Cycling Stability and Operation Temperature Range Enabled by a CoFe2O4 Catalytic Additive Under an External Magnetic Field

  • Zhang, Chao Yue
  • Gong, Li
  • Zhang, Chaoqi
  • Cheng, Xu
  • Balcells, Lluis
  • Zeng, Guifang
  • Jacas Biendicho, Jordi
  • Li, Junshan
  • Sun, Geng Zhi
  • Zhou, Jin Yuan
  • Cabot, Andreu
The electrochemical performance of room-temperature sodium-sulfur batteries (SSBs) is limited by slow reaction kinetics and sulfur loss in the form of sodium polysulfides (SPSs). Here, it is demonstrated that through electron spin polarization, at no additional energy cost, an external magnetic field (M on) generated by a permanent magnet can significantly improve the SPSs adsorption capacity and reaction dynamics of a ferrimagnetic sulfur host. More specifically, the preparation of a carbon nanofiber/CoFe2O4/S (CNF/CoFe2O4/S) cathode with unprecedented performance and stability at ambient temperature is detailed when M on. It is experimentally and theoretically demonstrated that the magnetic field polarizes the electrons of Co ions, enhancing the adsorption of SPSs and their catalytic conversion. CNF/CoFe2O4/S cathodes with spin polarization provide unprecedented decay rates down to 0.0039% per cycle at 1.0 C for 2700 cycles. The performance of SSBs is further tested, which has 248 mAh g−1 under 1.0 C after 100 cycles when M on. Furthermore, it is evidenced that even when removing the external magnetic field, the magnetic polarization effect persists, opening the door for practical applications. This study not only demonstrates an effective strategy to improve electrochemical performance in SSBs, but also contributes to the enrichments of spin effects in the fields of electrocatalysis., A.C. thanks financial support from the Combenergy project (PID2019−105490RB−C32) from the Spanish Ministerio de Ciencia e Innovación. This work was supported by the Innovation fund for small and Medium-sized Enterprises in Gansu Province (No.22CX3JA006), Lanzhou Talent Innovation and Entrepreneurship Project (No.2022-2-81), National Natural Science Foundation of China (Grant Nos. 61801200) and partially by the Fundamental Research Funds for the Central Universities (Grant Nos.: lzujbky−2021−it33). L.B. thanks financial support from the Ministry of Science and Innovation of Spain through the OXISHOT project (PID2021-128410OB-I00) C.Y.Z., L.G., C.Q.Z., X.C., and G.F.Z. thank the China Scholarship Council for the scholarship support. J.S.L. thanks financial support from Natural Science Foundation of Sichuan province (2022NSFSC1229). The authors also greatly acknowledge the support supported by the Supercomputing Center of Lanzhou University, China., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A CrMnFeCoNi high entropy alloy boosting oxygen evolution/reduction reactions and zinc-air battery performance

  • He, Ren
  • Yang, Linlin
  • Zhang, Yu
  • Wang, Xiang
  • Lee, Seung-Ho
  • Zhang, Ting
  • Li, Lingxiao
  • Liang, Zhifu
  • Chen, Jingwei
  • Li, Junshan
  • Ostovari Moghaddam, Ahmad
  • Llorca, Jordi
  • Ibáñez, María
  • Arbiol, Jordi
  • Xu, Ying
  • Cabot, Andreu
The development of cost-effective, high-activity and stable bifunctional catalysts for the oxygen reduction and evolution reactions (ORR/OER) is essential for zinc–air batteries (ZABs) to reach the market. Such catalysts must contain multiple adsorption/reaction sites to cope with the high demands of reversible oxygen electrodes. Herein, we propose a high entropy alloy (HEA) based on relatively abundant elements as a bifunctional ORR/OER catalyst. More specifically, we detail the synthesis of a CrMnFeCoNi HEA through a low-temperature solution-based approach. Such HEA displays superior OER performance with an overpotential of 265 mV at a current density of 10 mA/cm2, and a 37.9 mV/dec Tafel slope, well above the properties of a standard commercial catalyst based on RuO2. This high performance is partially explained by the presence of twinned defects, the incidence of large lattice distortions, and the electronic synergy between the different components, being Cr key to decreasing the energy barrier of the OER rate-determining step. CrMnFeCoNi also displays superior ORR performance with a half-potential of 0.78 V and an onset potential of 0.88 V, comparable with commercial Pt/C. The potential gap (Egap) between the OER overpotential and the ORR half-potential of CrMnFeCoNi is just 0.734 V. Taking advantage of these outstanding properties, ZABs are assembled using the CrMnFeCoNi HEA as air cathode and a zinc foil as the anode. The assembled cells provide an open-circuit voltage of 1.489 V, i.e. 90% of its theoretical limit (1.66 V), a peak power density of 116.5 mW/cm2, and a specific capacity of 836 mAh/g that stays stable for more than 10 days of continuous cycling, i.e. 720 cycles @ 8 mA/cm2 and 16.6 days of continuous cycling, i.e. 1200 cycles @ 5 mA/cm2., The authors thank the support from the project COMBENERGY, PID2019-105490RB-C32, from the Spanish Ministerio de Ciencia e Innovación. The authors acknowledge funding from Generalitat de Catalunya 2021 SGR 01581 and 2021 SGR 00457. ICN2 acknowledges the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706). IREC and ICN2 are funded by the CERCA Programme from the Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S). ICN2 acknowledges funding from Generalitat de Catalunya 2017 SGR 327. This study was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and Generalitat de Catalunya. The authors thank the support from the project NANOGEN (PID2020-116093RB-C43), funded by MCIN/ AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. Part of the present work has been performed in the frameworks of Universitat de Barcelona Nanoscience PhD program. This research was supported by the Scientific Service Units (SSU) of IST Austria through resources provided by Electron Microscopy Facility (EMF). S. Lee. and M. Ibáñez acknowledge funding by IST Austria and the Werner Siemens Foundation. J. Llorca is a Serra Húnter Fellow and is grateful to ICREA Academia program and projects MICINN/FEDER PID2021-124572OB-C31 and GC 2017 SGR 128. L. L.Yang thanks the China Scholarship Council (CSC) for the scholarship support (202008130132). Z. F. Liang acknowledges funding from MINECO SO-FPT PhD grant (SEV-2013-0295-17-1). J. W. Chen and Y. Xu thank the support from The Key Research and Development Program of Hebei Province (No. 20314305D) and the cooperative scientific research project of the “Chunhui Program” of the Ministry of Education (2018-7). This work was supported by the Natural Science Foundation of Sichuan province (NSFSC) and funded by the Science and Technology Department of Sichuan Province (2022NSFSC1229)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Phosphorous incorporation into palladium tin nanoparticles for the electrocatalytic formate oxidation reaction

  • Montaña-Mora, Guillem
  • Qi, Xueqiang
  • Wang, Xiang
  • Chacón-Borrero, Jesús
  • Martínez-Alanis, Paulina R.
  • Yu, Xiaoting
  • Li, Junshan
  • Xue, Qian
  • Arbiol, Jordi
  • Ibáñez, María
  • Cabot, Andreu
The deployment of direct formate fuel cells (DFFCs) relies on the development of active and stable catalysts for the formate oxidation reaction (FOR). Palladium, providing effective full oxidation of formate to CO2, has been widely used as FOR catalyst, but it suffers from low stability, moderate activity, and high cost. Herein, we detail a colloidal synthesis route for the incorporation of P on Pd2Sn nanoparticles. These nanoparticles are dispersed on carbon black and the obtained composite is used as electrocatalytic material for the FOR. The Pd2Sn0.8P-based electrodes present outstanding catalytic activities with record mass current densities up to 10.0 A mgPd-1, well above those of Pd1.6Sn/C reference electrode. These high current densities are further enhanced by increasing the temperature from 25 °C to 40 °C. The Pd2Sn0.8P electrode also allows for slowing down the rapid current decay that generally happens during operation and can be rapidly re-activated through potential cycling. The excellent catalytic performance obtained is rationalized using density functional theory (DFT) calculations., This work was carried out within the framework of the project Combenergy, PID2019-105490RB-C32, financed by the Spanish MCIN/AEI/10.13039/501100011033. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S). IREC and ICN2 are funded by the CERCA Programme from the Generalitat de Catalunya. Part of the present work has been performed in the frameworks of the Universitat de Barcelona Nanoscience PhD program. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and Generalitat de Catalunya. The authors thank the support from the project NANOGEN (PID2020-116093RB-C43), funded by MCIN/ AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the European Union. The project on which these results are based has received funding from the European Union's Horizon 2020 research and innovation programme under Marie Skłodowska-Curie grant agreement No. 801342 (Tecniospring INDUSTRY) and the Government of Catalonia's Agency for Business Competitiveness (ACCIÓ). J. Li is grateful for the project supported by the Natural Science Foundation of Sichuan (2022NSFSC1229). M.I. acknowledges funding by ISTA and the Werner Siemens Foundation., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Unveiling the role of counter-anions in amorphous transition metal-based oxygen evolution electrocatalysts

  • Wang, Xiang
  • Han, Xu
  • Du, Ruifeng
  • Liang, Zhifu
  • Zuo, Yong
  • Guardia, Pablo
  • Li, Junshan
  • Llorca, Jordi
  • Arbiol, Jordi
  • Zheng, Renji
  • Cabot, Andreu
At the initial stage of the oxygen evolution reaction (OER) most electrocatalysts undergo structural and chemical surface reconstruction. While this reconstruction strongly influences their performance, it is frequently overlooked. Herein, we analyze the role of the oxidized anions, which is particularly neglected in most previous works. We introduce a range of different anionic groups (Cl-, CH3COO-, NO3-, SO42-) on the surface of an amorphous ZnCoxNiyOz catalyst by a facile proton etching and ion exchange method from a ZIF-8 self-sacrificial template. The structural and chemical properties of the obtained set of materials are thoroughly analysed and correlated with their electrocatalytic performance to study the effect of surface anionic groups, phase transition, metal leaching and defect generation on OER activity. Exploiting the control possibilities provided by the synthesis method here described and employing the uncovered property-performance correlations, the electrocatalyst is optimized. As a result, we produce ZnCo1.25Ni0.73Ox-SO4 catalysts with outstanding OER performances, including a low overpotential of 252 mV at 10 mA cm−2 with a small Tafel slope of 41.6 mV dec−1. Furthermore, this catalyst exhibits remarkable stability with negligible overpotential variation for 100 h. The excellent catalytic properties are rationalized using density functional theory calculations, showing that the surface-adsorbed anions, particularly SO42−, can stabilize the OOH* intermediate, thus enhancing the OER activity. This work offers new insight into the roles of metal leaching and surface-adsorbed anions in the OER progress and facilitates the rational design of highly-efficient electrocatalysts for OER., The authors thank the support from the projects Combenergy PID2019-105490RB-C32 from the Spanish Ministerio de Ciencia e Innovación, ENE2016-77798-C4-3-R and NANOGEN (PID2020-116093RB-C43) funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the European Union. X. W., X. H. and R. D. thank the China Scholarship Council (CSC) for the scholarship support. The authors acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and 2017 SGR 1246. ICN2 acknowledges the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706). IREC and ICN2 are funded by the CERCA Programme /Generalitat de Catalunya. Z. L. acknowledges funding from MINECO SO-FPT PhD grant (SEV-2013-0295-17-1). Li is grateful for project No. 22NSFSC0966 provided by the Science & Technology Department of Sichuan Province. J.L. is a Serra Húnter Fellow and is grateful to MICINN/FEDER PID2021-124572OB-C31, GC 2017 SGR 128 and ICREA Academia Program., This work was supported by Natural Science Foundation of Sichuan Province (2022NSFSC1229)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Selective Ethylene Glycol Oxidation to Formate on Nickel Selenide with Simultaneous Evolution of Hydrogen

  • Li, Junshan
  • Li, Luming
  • Ma, Xingyu
  • Han, Xu
  • Xing, Congcong
  • Qi, Xueqiang
  • He, Ren
  • Arbiol, Jordi
  • Pan, Huiyan
  • Zhao, Jun
  • Deng, Jie
  • Zhang, Yu
  • Yang, Yaoyue
  • Cabot, Andreu
There is an urgent need for cost-effective strategies to produce hydrogen from renewable net-zero carbon sources using renewable energies. In this context, the electrochemical hydrogen evolution reaction can be boosted by replacing the oxygen evolution reaction with the oxidation of small organic molecules, such as ethylene glycol (EG). EG is a particularly interesting organic liquid with two hydroxyl groups that can be transformed into a variety of C1 and C2 chemicals, depending on the catalyst and reaction conditions. Here, a catalyst is demonstrated for the selective EG oxidation reaction (EGOR) to formate on nickel selenide. The catalyst nanoparticle (NP) morphology and crystallographic phase are tuned to maximize its performance. The optimized NiS electrocatalyst requires just 1.395 V to drive a current density of 50 mA cm-2 in 1 m potassium hydroxide (KOH) and 1 m EG. A combination of in situ electrochemical infrared absorption spectroscopy (IRAS) to monitor the electrocatalytic process and ex situ analysis of the electrolyte composition shows the main EGOR product is formate, with a Faradaic efficiency above 80%. Additionally, C2 chemicals such as glycolate and oxalate are detected and quantified as minor products. Density functional theory (DFT) calculations of the reaction process show the glycol-to-oxalate pathway to be favored via the glycolate formation, where the CC bond is broken and further electro-oxidized to formate., This work was supported by the start-up funding at Chengdu University and the Natural Science Foundation of Sichuan (NSFSC) project funded by the Science and Technology Department of Sichuan Province (Project No. 2022NSFSC1229), and also the open project from Hebei Key Laboratory of Photoelectric Control on Surface and Interface (Project No. ZD2022003). It was also supported by the European Regional Development Funds and by the Spanish Ministerio de Ciencia e Innovación through the project COMBENERGY (Project No. PID2019-105490RB-C32). Y.-Y.Y. acknowledges funding from the National Natural Science Foundation of China (NSFC, Grant No. 22172121), the Natural Science Foundation of Sichuan Province (NSFSC, Grant No. 23NSFSC6266) and the Fundamental Research Funds for the Central Universities, Southwest Minzu University (Grant No. xiao2021102). X.H. has received funding from the CSC-UAB Ph.D. scholarship program. X.H. and J.A. acknowledge funding from Generalitat de Catalunya 2021SGR00457. ICN2 acknowledges support from the Severo Ochoa Programme from Spanish MCIN/AEI (Grant No. CEX2021-001214-S). ICN2 authors thank the support from the project NANOGEN (PID2020-116093RB-C43), funded by MCIN/AEI/10.13039/501100011033/ and by "EDRF a way of making Europe", by the "European Union". IREC and ICN2 were funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work was performed in the framework of the Universitat Autònoma de Barcelona Materials Science Ph.D. program. This study was also supported by MCIN with funding from European Union NextGenerationEU (Grant No. PRTR-C17.I1) and Generalitat de Catalunya., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Crystalline Magnetic Gels and Aerogels Combining Large Surface Areas and Magnetic Moments

  • Berestok, Taisiia
  • Chacón Borrero, Jesús
  • Li, Junshan
  • Guardia, Pablo
  • Cabot, Andreu
The production of materials that simultaneously combine large surface areas and high crystallinities is a major challenge. Conventional sol-gel chemistry strategies to produce high-surface-area gels and aerogels generally result in amorphous or poorly crystalline materials. To attain proper crystallinities, materials are exposed to relatively high annealing temperatures that result in significant surface losses. This is a particularly limiting issue in the production of high-surface-area magnetic aerogels owing to the strong relationship between crystallinity and magnetic moment. To overcome this limitation, we demonstrate here the gelation of preformed magnetic crystalline nanodomains to produce magnetic aerogels with high surface area, crystallinity, and magnetic moment. To exemplify this strategy, we use colloidal maghemite nanocrystals as gel building blocks and an epoxide group as the gelation agent. After drying from supercritical CO2, aerogels show surface areas close to 200 m2 g-1 and a well-defined maghemite crystal structure that provides saturation magnetizations close to 60 emu g-1. For comparison, the gelation of hydrated iron chloride with propylene oxide provides amorphous iron oxide gels with slightly larger surface areas, 225 m2 g-1, but very low magnetization, below 2 emu g-1. Thermal treatment at 400 °C is necessary to crystallize the material, which results in a surface area loss down to 87 m2 g-1, well below the values obtained from the nanocrystal building blocks., The authors acknowledge the support from the project CombEnergy (PID2019-105490RB-C32) from the Spanish Ministerio de Ciencia e Innovación., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Palladium Hydride on C2N to Boost Formate Oxidation

  • Wang, Xiang
  • Montaña-Mora, Guillem
  • Han, Xu
  • Yu, Jing
  • Qi, Xueqiang
  • Arbiol, Jordi
  • Liang, Zhifu
  • Cabot, Andreu
  • Li, Junshan
The lack of electrocatalysts for the formate oxidation reaction (FOR) hampers the deployment of direct formate fuel cells (DFFCs). To overcome this limitation, herein, we detail the production of palladium hydride particles supported on C2N (PdH0.58@C2N) via a facile method. PdH0.58@C2N displays excellent FOR performance, reaching current densities up to 5.6 A·mgPd–1 and stable cycling and chronoamperometric operation. The Pd lattice expands due to the hydrogen intercalation. Besides, an electronic redistribution associated with the distinct electronegativity of Pd and H is observed. Both phenomena modify the electron energy levels, enhancing the activity and stability of the composite catalyst. More specifically, differential functional theory calculations show H intercalation to downshift the Pd d-band center in Pd0.58@C2N, weakening adsorbate binding and accelerating the FOR rate-determining step., The authors acknowledge funding from Generalitat de Catalunya 2021 SGR 01581 and the projects COMBENERGY (PID2019-105490RB-C32) from the Spanish Ministerio de Ciencia e Innovación, ENE2016-77798-C4-3-R, and NANOGEN (PID2020-116093RB-C43) funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe,” by the “European Union.” X.W., X.H., and R.D. thank the China Scholarship Council (CSC) for the scholarship support. The authors acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and 2017 SGR 1246. ICN2 acknowledges the Severo Ochoa program from Spanish MINECO (grant no. SEV-2017-0706). IREC and ICN2 are funded by the CERCA Programme/Generalitat de Catalunya. Z.L. acknowledges funding from MINECO SO-FPT PhD grant (SEV-2013-0295-17-1). Li is grateful to project No. 22NSFSC0966 provided by the Science and Technology Department of Sichuan Province. J.L. is a Serra Húnter Fellow and is grateful to MICINN/FEDER RTI2018-093996-B-C31, GC 2017 SGR 128, and ICREA Academia program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Self-supported NiO/CuO electrodes to boost urea oxidation in direct urea fuel cells

  • Yang, Linlin
  • He, Ren
  • Wang, Xiang
  • Yang, Tingting
  • Zhang, Ting
  • Zuo, Yong
  • Lu, Xuan
  • Liang, Zhifu
  • Li, Junshan
  • Arbiol, Jordi
  • Martínez-Alanis, Paulina R.
  • Qi, Xueqiang
  • Cabot, Andreu
Direct urea fuel cells (DUFCs) can be used to treat residual wastewater while generating electricity. Herein, self-supported electrodes consisting of NiO nanosheets vertically grown on CuO nanowires are synthesized to realize the urea oxidation reaction (UOR). Such electrodes show excellent UOR performance requiring 1.39 V vs. RHE to achieve 100 mA/cm2. Besides, DUFCs provide open circuit voltages and power densities up to 0.88 V and 11.35 mW/cm2. Electrochemical characterization and Raman spectroscopy prove the formation of NiOOH to enable the UOR. Mott-Schottky analysis and UV photoelectron spectroscopy show the NiO/CuO p-p heterostructure to facilitate the charge transfer from CuO nanowires to NiO nanosheets. Besides, at a local level, density functional theory calculations show that the presence of CuO modulates the electronic states of Ni at the very NiOOH/CuO interface, which results in stretched Ni-O bonds and a uniquely elongated N-H bond of urea that favors its oxidation., The authors acknowledge funding from Generalitat de Catalunya 2021 SGR 01581, 2021 SGR 00457 and the project COMBENERGY, PID2019-105490RB-C32, from the Spanish Ministerio de Ciencia e Innovación. The project on which these results are based has received funding from the European Union's Horizon 2020 Research and Innovation Program under Marie Skłodowska-Curie Grant agreement No. 801342 (Tecniospring INDUSTRY) and the Government of Catalonia's Agency for Business Competitiveness (ACCIÓ). ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No.: CEX2021-001214-S). IREC and ICN2 are funded by the CERCA Programme from the Generalitat de Catalunya. This study is part of the Advanced Materials Programme and is supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17. I1) and Generalitat de Catalunya. The authors thank the support from the project NANOGEN (PID2020-116093RB-C43), funded by MCIN/ AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. Part of the present work has been performed in the frameworks of Universitat de Barcelona Nanoscience PhD Program. L. L.Yang, X. Wang and X. Lu thank the China Scholarship Council (CSC) for the scholarship support. Z. Liang acknowledges funding from MINECO SO-FPT PhD grant (SEV-2013-0295-17-1). J. Li is grateful for the Natural Science Foundation of Sichuan Project (2022NSFSC1229)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tubular C3N4 Nanotubes as Metal-Free Sulfur Hosts toward Stable Lithium–Sulfur Batteries

  • Zhang, Chaoqi
  • Du, Ruifeng
  • Martí-Sànchez, Sara
  • Xiao, Ke
  • Yang, Dawei
  • Zhang, Chaoyue
  • Li, Canhuang
  • Zeng, Guifang
  • Chang, Xingqi
  • He, Ren
  • Arbiol, Jordi
  • Li, Junshan
  • Jacas Biendicho, Jordi
  • Cabot, Andreu
Lithium–sulfur batteries (LSBs) with high energy density have the potential to replace current commercial lithium-ion batteries. However, the shuttle effect and the low conversion kinetics of lithium polysulfide (LiPS) remain the main challenges in the development of LSBs. In this study, a metal-free and simple-to-prepare carbon nitride with a high surface area and tubular morphology (CN-nt) is used as the sulfur host for LSBs. Due to its unique nanostructure and rich active sites, it not only effectively disperses the active sulfur material and anchors soluble polysulfide species, but it also promotes the nucleation process of Li2S, thus achieving fast and sustainable Li-S redox reactions. Experimental results show that the obtained S@CN-nt electrodes exhibit a high sulfur utilization of 1296.2 mAh g−1 at 0.1 C and a significant rate capability of 689.4 mAh g−1 at the high current rate of 3C. More importantly, the capacity retention reaches 87.7% after 500 cycles. This simple strategy of engineering unique carbon-based nanostructured hosts can inspire new ideas for developing cost-effective and metal-free host materials for sulfur-based batteries., The authors thank the support from the project COMBENERGY, PID2019-105490RB-C32, from the Spanish Ministerio de Ciencia e Innovación. The authors acknowledge funding from Generalitat de Catalunya 2021 SGR 01581 and 2021 SGR 00457. ICN2 acknowledges the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706). IREC and ICN2 are funded by the CERCA Programme from the Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No. CEX2021-001214-S). ICN2 acknowledges funding from Generalitat de Catalunya 2017 SGR 327. This study was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and Generalitat de Catalunya. The authors thank the support from the project NANOGEN (PID2020-116093RB-C43), funded by MCIN/ AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. This work was supported by the Natural Science Foundation of Sichuan province (NSFSC) and funded by the Science and Technology Department of Sichuan Province (2022NSFSC1229). The authors acknowledge scholarship from the China Scholarship Council (201706650011)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Brookite TiO2 nanorods as promising electrochromic and energy storage materials for smart windows

  • Xing, Congcong
  • Yang, Linlin
  • He, Ren
  • Spadaro, Maria Chiara
  • Zhang, Yu
  • Arbiol, Jordi
  • Li, Junshan
  • Poudel, Bed
  • Nozariasbmarz, Amin
  • Li, Wenjie
  • Lim, Khak Ho
  • Liu, Yu
  • Llorca, Jordi
  • Cabot, Andreu
Electrochromic smart windows (ESWs) offer an attractive option for regulating indoor lighting conditions. Electrochromic materials based on ion insertion/desertion mechanisms also present the possibility for energy storage, thereby increasing overall energy efficiency and adding value to the system. However, current electrochromic electrodes suffer from performance degradation, long response time, and low coloration efficiency. This work aims to produce defect-engineered brookite titanium dioxide (TiO2 ) nanorods (NRs) with different lengths and investigate their electrochromic performance as potential energy storage materials. The controllable synthesis of TiO2 NRs with inherent defects, along with smaller impedance and higher carrier concentrations, significantly enhances their electrochromic performance, including improved resistance to degradation, shorter response times, and enhanced coloration efficiency. The electrochromic performance of TiO2 NRs, particularly longer ones, is characterized by fast switching speeds (20 s for coloration and 12 s for bleaching), high coloration efficiency (84.96 cm2 C-1 at a 600 nm wavelength), and good stability, highlighting their potential for advanced electrochromic smart window applications based on Li+ ion intercalation., This work was supported by the European Regional Development Funds and by the Spanish Ministerio de Economía y Competitividad through projects PID2021-124572OB-C31 and COMBENERGY (PID2019-105490RB-C32). The authors acknowledge funding from Generalitat de Catalunya 2021SGR00457, 2021SGR01061, and 2021SGR01581. This study was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1). This research is part of the CSIC program for the Spanish Recovery, Transformation and Resilience Plan funded by the Recovery and Resilience Facility of the European Union, established by the Regulation (EU) 2020/2094. The authors thank the support from the project NANOGEN (PID2020-116093RB-C43), funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme / Generalitat de Catalunya. J.L. is grateful for the Natural Science Foundation of Sichuan project (2022NSFSC1229). L.Y. thanks the China Scholarship Council for scholarship support., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Pt-Ni contact engineering in carbon nitride based photocatalysts for hydrogen production

  • Sayago-Carro, Rocío
  • Piqueras-Pérez, Pablo
  • Du, Ruifeng
  • Li, Junshan
  • Yu, Jing
  • Arbiol, Jordi
  • Kubacka, Anna
  • Cabot, Andreu
  • Fernández García, Marcos
The effect of a binary PtNi co-catalyst supported on graphitic carbon nitride nanosheets is studied in the photo-production of hydrogen from methanol:water mixtures. The physicochemical analysis provides evidence that the carbon nitride support allows the formation of highly dispersed PtNi nanoparticles with an average composition of Pt 85 % Ni 15 %. The binary system outperforms the monometallic Pt and Ni counterparts and renders an extraordinary quantum efficiency of 8.8 % for hydrogen photo-production. The formation of a PtNi alloy, with a Pt-enriched surface and electronic properties influenced by the heterometallic contact, provides high and stable activity, mostly as a consequence of the effects that the co-catalyst exerts on the charge carrier handling capability of the solid., The authors would like to thank financial support by rants PID2019-105490RB-C31 and PID2019-105490RB-C32 funded by MCIN/AEI/10.13039/501100011033 (Spain) and, as appropriate, by “ERDF A way of making Europe”, by the “European Union”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Synergistic effect of surface oxygen vacancies and hydroxyl groups on Cu-doped TiO2 photocatalyst for hydrogen evolution

  • Xing, Congcong
  • Zhang, Zhaofu
  • Zhang, Yu
  • Han, Xu
  • Yang, Linlin
  • Li, Junshan
  • Wang, Xiang
  • Martínez-Alanis, Paulina R.
  • Demir, Muslum
  • Piveteau, Laura
  • Florian, Pierre
  • Arbiol, Jordi
  • Guo, Yuzheng
  • Llorca, Jordi
  • Cabot, Andreu
The intricate nature of the titanium dioxide (TiO2) photocatalytic system, influenced by Cu doping, often yields conflicting outcomes. This study addresses this complexity by examining the impact of Cu ion doping in nanostructured TiO2 to augment its photocatalytic efficacy in hydrogen generation from ethanol-water mixtures. The improved performance is primarily attributed to the generation of oxygen vacancies (Ovac) within the TiO2 lattice. By adjusting the thermal processing parameters, the chemical state of Cu is modulated to optimize photocatalytic performance. Solid-state nuclear magnetic resonance (SSNMR) and density functional theory (DFT) calculations confirm that the presence of Ovac and hydroxyl groups (OH−) surface species not only facilitates local spatial charge separation but also enhances light absorption, thereby improving photocatalytic hydrogen evolution reaction (HER) rate up to 20.2 mmol h−1 g−1 under UV light. Furthermore, a proposed mechanism involves the participation of Ovac and OH− species, supported by Mott-Schottky (M − S) plots and ultraviolet photoelectron spectroscopy (UPS), revealing that Cu–TiO2 exhibits a lower flat band potential (Efb) and smaller work function compared to TiO2. This research underscores the pivotal role of Cu ions and Ovac:OH− in advancing the photocatalytic activity of TiO2-based crystals, imparting noteworthy implications for sustainable hydrogen generation., This work was supported by the European Regional Development Funds and by the Spanish Ministerio de Economía y Competitividad through projects PID2021-124572OB-C31 and COMBENERGY (PID2019-105490RB-C32). ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17. I1) and Generalitat de Catalunya. This research is part of the CSIC program for the Spanish Recovery, Transformation and Resilience Plan funded by the Recovery and Resilience Facility of the European Union, established by the Regulation (EU) 2020/2094. The authors thank support from the project NANOGEN (PID2020-116093RB-C43), funded by MCIN/AEI/10.13039/501100011033/and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme/Generalitat de Catalunya. J. Li is grateful for the Natural Science Foundation of Sichuan project (2022NSFSC1229). X. W. thank the China Scholarship Council for scholarship support., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Controllable Synthesis of Defective TiO2 Nanorods for Efficient Hydrogen Production

  • Xing, Congcong
  • Yang, Linlin
  • Spadaro, Maria Chiara
  • Zhang, Yu
  • Guardia, Pablo
  • Arbiol, Jordi
  • Liu, Tianqi
  • Fan, Xiaolei
  • Fernández García, Marcos
  • Llorca, Jordi
  • Cabot, Andreu
Nanorods (NRs), with their high atomic surface exposure within a crystalline architecture, facilitate effective diffusion/transport of charge, rendering them particularly suitable for applications requiring both interaction with the media and charge transfer. In this study, we present a straightforward approach to produce brookite-phase titanium dioxide (TiO2) NRs with tunable defects and narrow size distributions by utilizing methylamine hydrochloride and 1,2-hexadecanediol as shape-directing agents. The presence of the Ti3+ defect was confirmed by electron paramagnetic resonance and X-ray photoelectron spectroscopy, and its effect on the photocatalytic properties of TiO2, with and without Pt loading, show that the longest TiO2 NRs provide the highest photocatalytic and photoelectrochemical hydrogen production activity. Transient photocurrent response analysis, electrochemical impedance spectroscopy, and Mott-Schottky analysis plots indicate that an increase in temperature significantly reduces the interface barrier and lowers the transport resistance, leading to a 104% improvement in hydrogen production rates from 25 to 60 °C for the longest TiO2 NRs. This study underscores the critical role of the TiO2 nanorod dimensions (18-45 nm) in elevating the hydrogen production efficiency. At 25 °C, rates surged from 1.6 to 2.6 mmol g-1 h-1, and at 60 °C, rates soared from 3.3 to 5.3 mmol g-1 h-1, demonstrating the substantial impact of TiO2 NRs on enhancing hydrogen generation., This work was supported by the European Regional Develop-ment Funds and by the Spanish Ministerio de Economía yCompetitividad through projects PID2021-124572OB-C31and COMBENERGY (PID2019-105490RB-C32). ICN2acknowledges funding from Generalitat de Catalunya2021SGR00457. This study was supported by MCIN withfunding from European Union NextGenerationEU (PRTR-C17.I1) and Generalitat de Catalunya. This research is part ofthe CSIC program for the Spanish Recovery, Transformationand Resilience Plan funded by the Recovery and ResilienceFacility of the European Union, established by the Regulation(EU) 2020/2094. The authors thank support from the projectNANOGEN (PID2020-116093RB-C43), funded by MCIN/AEI/10.13039/501100011033/and by “ERDF A way ofmaking Europe”, by the “European Union”. ICN2 is supportedby the Severo Ochoa program from Spanish MCIN/AEI(Grant No. CEX2021-001214-S) and is funded by the CERCAProgramme/Generalitat de Catalunya. P.G. acknowledgesfinancial support from the Spanish government (MICIU)through the Ramon y Cajal research program (RyC2019-028414-I). L.L.Y. thank the China Scholarship Council forscholarship support. This project was also supported by thespecial innovation project fund from the Institute of Wenzhou,Zhejiang University (No. XMGL-KJZX-202204). C.C.X. thanks financial support from the start-up funding ofZJU-WZ (XM202400002) and Wenzhou Research Project(G20240041), With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Photodehydrogenation of ethanol over CuO/TiO heterostructures

  • Xing, Congcong|||0000-0001-7674-6720
  • Zhang, Yu|||0000-0002-0332-0013
  • Liu, Yongpeng|||0000-0002-4544-4217
  • Wang, Xiang
  • Li, Junshan|||0000-0002-1482-1972
  • Martínez-Alanis, Paulina R.|||0000-0003-3675-4472
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Guardia, Pablo|||0000-0001-9076-4642
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The photodehydrogenation of ethanol is a sustainable and potentially cost-effective strategy to produce hydrogen and acetaldehyde from renewable resources. The optimization of this process requires the use of highly active, stable and selective photocatalytic materials based on abundant elements and the proper adjustment of the reaction conditions, including temperature. In this work, CuO-TiO type-II heterojunctions with different CuO amounts are obtained by a one-pot hydrothermal method. The structural and chemical properties of the produced materials and their activity toward ethanol photodehydrogenation under UV and visible light illumination are evaluated. The CuO-TiO photocatalysts exhibit a high selectivity toward acetaldehyde production and up to tenfold higher hydrogen evolution rates compared to bare TiO. We further discern here the influence of temperature and visible light absorption on the photocatalytic performance. Our results point toward the combination of energy sources in thermo-photocatalytic reactors as an efficient strategy for solar energy conversion.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

MOF-derived ultrathin cobalt molybdenum phosphide nanosheets for efficient electrochemical overall water splitting

  • Wang, Xiang
  • Yang, Linlin|||0009-0006-9953-5698
  • Xing, Congcong|||0000-0001-7674-6720
  • Han, Xu|||0000-0001-8319-8830
  • Du, Ruifeng
  • He, Ren|||0000-0003-3712-5539
  • Guardia, Pablo|||0000-0001-9076-4642
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The development of high-performance and cost-effective earth-abundant transition metal-based electrocatalysts is of major interest for several key energy technologies, including water splitting. Herein, we report the synthesis of ultrathin CoMoP nanosheets through a simple ion etching and phosphorization method. The obtained catalyst exhibits outstanding electrocatalytic activity and stability towards oxygen and hydrogen evolution reactions (OER and HER), with overpotentials down to 273 and 89 mV at 10 mA cm -2, respectively. The produced CoMoP nanosheets are also characterized by very small Tafel slopes, 54.9 and 69.7 mV dec -1 for OER and HER, respectively. When used as both cathode and anode electrocatalyst in the overall water splitting reaction, CoMoP-based cells require just 1.56 V to reach 10 mA cm -2 in alkaline media. This outstanding performance is attributed to the proper composition, weak crystallinity and two-dimensional nanosheet structure of the electrocatalyst.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

2D/2D heterojunction of TiO2 nanoparticles and ultrathin G-C3N4 nanosheets for efficient photocatalytic hydrogen evolution

  • Du, Ruifeng
  • Li, Baoying
  • Han, Xu|||0000-0001-8319-8830
  • Xiao, Ke
  • Wang, Xiang
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Photocatalytic hydrogen evolution is considered one of the promising routes to solve the energy and environmental crises. However, developing efficient and low-cost photocatalysts remains an unsolved challenge. In this work, ultrathin 2D g-CN nanosheets are coupled with flat TiO nanoparticles as face-to-face 2D/2D heterojunction photocatalysts through a simple electrostatic self-assembly method. Compared with g-CN and pure TiO nanosheets, 2D/2D TiO/g-CN heterojunctions exhibit effective charge separation and transport properties that translate into outstanding photocatalytic performances. With the optimized heterostructure composition, stable hydrogen evolution activities are threefold and fourfold higher than those of pure TiO and g-CN are consistently obtained. Benefiting from the favorable 2D/2D heterojunction structure, the TiO/g-CN photocatalyst yields H evolution rates up to 3875 μmol·g -1 ·h -1 with an AQE of 7.16% at 380 nm.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Molecular engineering to introduce carbonyl between nickel salophen active sites to enhance electrochemical CO2 reduction to methanol

  • Liang, Zhifu
  • Wang, Jianghao
  • Tang, PengYi|||0000-0002-2306-095X
  • Tang, Weiqiang|||0000-0002-7726-4130
  • Liu, Lijia
  • Shakouri, Mohsen
  • Wang, Xiang
  • Llorca, Jordi|||0000-0002-7447-9582
  • Zhao, Shuangliang
  • Heggen, Marc|||0000-0002-2646-0078
  • Dunin-Borkowski, Rafal E.|||0000-0001-8082-0647
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Wu, Hao Bin
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
The electrochemical reduction of CO to methanol is a potentially cost-effective strategy to reduce the concentration of this greenhouse gas while at the same time producing a value-added chemical. Herein, we detail a highly efficient 2D nickel organic framework containing a large density of highly dispersed salophen NiNO active sites toward electrochemical CORR to methanol. By tuning the ligand environment of the salophen NiNO, the electrocatalytic activity of the material toward CO reduction can be significantly improved. We prove that by introducing a carbonyl group at the ligand environment of the Ni active sites, the electrochemical CO reduction activity is highly promoted and its product selectivity reaches a Faradaic efficiency of 27% toward the production of methanol at - 0.9 V vs RHE. The salophen-based π-d conjugated metal-organic framework presented here thus provides the best performance toward CO reduction to methanol among the previously developed nickel-based electrocatalysts.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A novel π-d conjugated cobalt tetraaza[14]annulene based atomically dispersed electrocatalyst for efficient CO2 reduction

  • Liang, Zhifu
  • Zhang, Ting|||0000-0002-0317-9662
  • Cao, Pengfei
  • Yoshida, Takefumi
  • Tang, Weiqiang|||0000-0002-7726-4130
  • Wang, Xiang
  • Zuo, Yong|||0000-0003-1564-467X
  • Tang, PengYi|||0000-0002-2306-095X
  • Heggen, Marc|||0000-0002-2646-0078
  • Dunin-Borkowski, Rafal E.|||0000-0001-8082-0647
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Yamashita, Masahiro
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
Tetraaza[14]annulenes (TAA) are synthetic macrocycles which are analogue to porphyrins. However, there are almost no reports about the synthesis of polymers based on TAA and neither on their use as electrocatalysts. The study of new catalysts to promote an efficient electrochemical conversion of carbon dioxide to valuable chemicals is a promising approach to relieve the pressure of carbon emissions and realize the carbon cycle. Herein, we first report the synthesis of a novel tetraaza[14]annulene (TAA) based organic polymeric metal complex (PMC) by a non-template method. This PMC is used as ligand to construct a π-d conjugated cobalt coordination polymer (Poly-TAA-Co) with CoN structure which is supported on multi-wall carbon nanotubes (CNTs) to work as an atomically dispersed efficient electrocatalyst for the CO reduction reaction (CORR). The resulting catalyst (Poly-TAA-Co-CNT) exhibits excellent performance, with a 90% CO faradaic efficiency, a low overpotential (390 mV) and good stability in 0.5 M KHCO aqueous solution. Density functional theory calculations confirmed that the cobalt tetra[14]annulene is an excellent active site for electrocatalytic CORR. This work not only inspires the design of novel TAA based macromolecules, but also paves the way to the development and application of new molecular-based catalysts for electrocatalytic CORR.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Controlled oxygen doping in highly dispersed Ni-loaded g-C3N4 nanotubes for efficient photocatalytic H2O2 production

  • Du, Ruifeng
  • Xiao, Ke
  • Li, Baoying
  • Han, Xu|||0000-0001-8319-8830
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Wang, Xiang
  • Zuo, Yong|||0000-0003-1564-467X
  • Guardia, Pablo|||0000-0001-9076-4642
  • Li, Junshan|||0000-0002-1482-1972
  • Chen, Jianbin|||0000-0003-1104-7237
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Hydrogen peroxide (HO) is both a key component in several industrial processes and a promising liquid fuel. The production of HO by solar photocatalysis is a suitable strategy to convert and store solar energy into chemical energy. Here we report an oxygen-doped tubular g-CN with uniformly dispersed nickel nanoparticles for efficient photocatalytic HO generation. The hollow structure of the tubular g-CN provides a large surface with a high density of reactive sites and efficient visible light absorption during the photocatalytic reaction. The oxygen doping and Ni loading enable a fast separation of photogenerated charge carriers and a high selectivity toward the two-electron process during the oxygen reduction reaction (ORR). The optimized composition, Ni/OtCN, displays an HO production rate of 2464 μmol g·h, which is eightfold higher than that of bulk g-CN under visible light irradiation (λ.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Electrochemical conversion of alcohols into acidic commodities on nickel sulfide nanoparticles

  • Li, Junshan|||0000-0002-1482-1972
  • Tian, Xi
  • Wang, Xiang
  • Zhang, Ting|||0000-0002-0317-9662
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Li, Luming
  • Zuo, Yong|||0000-0003-1564-467X
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The electrocatalytic oxidation of alcohols is a potentially cost-effective strategy for the synthesis of valuable chemicals at the anode while simultaneously generating hydrogen at the cathode. For this approach to become commercially viable, high-activity, low-cost, and stable catalysts need to be developed. Herein, we demonstrate an electrocatalyst based on earth-abundant nickel and sulfur elements. Experimental investigations reveal the produced NiS displays excellent electrocatalytic performance associated with a higher electrochemical surface area (ECSA) and the presence of sulfate ions on the formed NiOOH surface in basic media. The current densities reached for the oxidation of ethanol and methanol at 1.6 V vs reversible hydrogen electrode (RHE) are up to 175.5 and 145.1 mA cm-2, respectively. At these high current densities, the Faradaic efficiency of methanol to formate conversion is 98% and that of ethanol to acetate is 81%. Density functional theory calculations demonstrate the presence of the generated sulfate groups to modify the electronic properties of the NiOOH surface, improving electroconductivity and electron transfer. Besides, calculations are used to determine the reaction energy barriers, revealing the dehydrogenation of ethoxy groups to be more favorable than that of methoxy on the catalyst surface, which explains the highest current densities obtained for ethanol oxidation.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Unveiling the role of counter-anions in amorphous transition metal-based oxygen evolution electrocatalysts

  • Wang, Xiang
  • Han, Xu|||0000-0001-8319-8830
  • Du, Ruifeng
  • Liang, Zhifu
  • Zuo, Yong|||0000-0003-1564-467X
  • Guardia, Pablo|||0000-0001-9076-4642
  • Li, Junshan|||0000-0002-1482-1972
  • Llorca, Jordi|||0000-0002-7447-9582
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Zheng, Renji
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
At the initial stage of the oxygen evolution reaction (OER) most electrocatalysts undergo structural and chemical surface reconstruction. While this reconstruction strongly influences their performance, it is frequently overlooked. Herein, we analyze the role of the oxidized anions, which is particularly neglected in most previous works. We introduce a range of different anionic groups (Cl, CHCOO, NO , SO ) on the surface of an amorphous ZnCoNiO catalyst by a facile proton etching and ion exchange method from a ZIF-8 self-sacrificial template. The structural and chemical properties of the obtained set of materials are thoroughly analysed and correlated with their electrocatalytic performance to study the effect of surface anionic groups, phase transition, metal leaching and defect generation on OER activity. Exploiting the control possibilities provided by the synthesis method here described and employing the uncovered property-performance correlations, the electrocatalyst is optimized. As a result, we produce ZnCoNiO-SO catalysts with outstanding OER performances, including a low overpotential of 252 mV at 10 mA cm with a small Tafel slope of 41.6 mV dec. Furthermore, this catalyst exhibits remarkable stability with negligible overpotential variation for 100 h. The excellent catalytic properties are rationalized using density functional theory calculations, showing that the surface-adsorbed anions, particularly SO , can stabilize the OOH* intermediate, thus enhancing the OER activity. This work offers new insight into the roles of metal leaching and surface-adsorbed anions in the OER progress and facilitates the rational design of highly-efficient electrocatalysts for OER.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Cobalt molybdenum nitride-based nanosheets for seawater splitting

  • Wang, Xiang
  • Han, Xu|||0000-0001-8319-8830
  • Du, Ruifeng
  • Xing, Congcong|||0000-0001-7674-6720
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Liang, Zhifu
  • Guardia, Pablo|||0000-0001-9076-4642
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Li, Junshan|||0000-0002-1482-1972
The development of cost-effective bifunctional catalysts for water electrolysis is both a crucial necessity and an exciting scientific challenge. Herein, a simple approach based on a metal-organic framework sacrificial template to preparing cobalt molybdenum nitride supported on nitrogen-doped carbon nanosheets is reported. The porous structure of produced composite enables fast reaction kinetics, enhanced stability, and high corrosion resistance in critical seawater conditions. The cobalt molybdenum nitride-based electrocatalyst is tested toward both oxygen evolution reaction and hydrogen evolution reaction half-reactions using the seawater electrolyte, providing excellent performances that are rationalized using density functional theory. Subsequently, the nitride composite is tested as a bifunctional catalyst for the overall splitting of KOH-treated seawater from the Mediterranean Sea. The assembled system requires overpotentials of just 1.70 V to achieve a current density of 100 mA cm-2 in 1 M KOH seawater and continuously works for over 62 h. This work demonstrates the potential of transition-metal nitrides for seawater splitting and represents a step forward toward the cost-effective implementation of this technology.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Selective Ethylene Glycol Oxidation to Formate on Nickel Selenide with Simultaneous Evolution of Hydrogen

  • Li, Junshan|||0000-0002-1482-1972
  • Li, Luming
  • Ma, Xingyu
  • Han, Xu|||0000-0001-8319-8830
  • Xing, Congcong|||0000-0001-7674-6720
  • Qi, Xueqiang|||0000-0003-4566-9552
  • He, Ren|||0000-0003-3712-5539
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Pan, Huiyan
  • Zhao, Jun
  • Deng, Jie
  • Zhang, Yu|||0000-0002-0332-0013
  • Yang, Yaoyue|||0000-0002-4573-9437
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
There is an urgent need for cost-effective strategies to produce hydrogen from renewable net-zero carbon sources using renewable energies. In this context, the electrochemical hydrogen evolution reaction can be boosted by replacing the oxygen evolution reaction with the oxidation of small organic molecules, such as ethylene glycol (EG). EG is a particularly interesting organic liquid with two hydroxyl groups that can be transformed into a variety of C1 and C2 chemicals, depending on the catalyst and reaction conditions. Here, a catalyst is demonstrated for the selective EG oxidation reaction (EGOR) to formate on nickel selenide. The catalyst nanoparticle (NP) morphology and crystallographic phase are tuned to maximize its performance. The optimized NiS electrocatalyst requires just 1.395 V to drive a current density of 50 mA cm -2 in 1 potassium hydroxide (KOH) and 1 EG. A combination of in situ electrochemical infrared absorption spectroscopy (IRAS) to monitor the electrocatalytic process and ex situ analysis of the electrolyte composition shows the main EGOR product is formate, with a Faradaic efficiency above 80%. Additionally, C2 chemicals such as glycolate and oxalate are detected and quantified as minor products. Density functional theory (DFT) calculations of the reaction process show the glycol-to-oxalate pathway to be favored via the glycolate formation, where the C-C bond is broken and further electro-oxidized to formate. A combination of in situ and ex situ analysis shows the main product of the ethylene glycol (EG) oxidation reaction (EGOR) is formate with a Faradaic efficiency above 80%, and glycolate and oxalate as minor chemicals on nickel selenide nanoparticles (NPs). Further density functional theory (DFT) calculation reveals the electrooxidation mechanism to these products.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Tubular C3N4 Nanotubes as Metal-Free Sulfur Hosts toward Stable Lithium-Sulfur Batteries

  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Du, Ruifeng
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Xiao, Ke
  • Yang, Dawei|||0000-0002-3842-8286
  • Zhang, Chao Yue
  • Li, Canhuang
  • Zeng, Guifang|||0000-0002-5927-4730
  • Chang, Xingqi|||0000-0002-2604-0233
  • He, Ren|||0000-0003-3712-5539
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Li, Junshan|||0000-0002-1482-1972
  • Jacas Biendicho, Jordi|||0000-0001-5981-6168
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Lithium-sulfur batteries (LSBs) with high energy density have the potential to replace current commercial lithium-ion batteries. However, the shuttle effect and the low conversion kinetics of lithium polysulfide (LiPS) remain the main challenges in the development of LSBs. In this study, a metal-free and simple-to-prepare carbon nitride with a high surface area and tubular morphology (CN-nt) is used as the sulfur host for LSBs. Due to its unique nanostructure and rich active sites, it not only effectively disperses the active sulfur material and anchors soluble polysulfide species, but it also promotes the nucleation process of LiS, thus achieving fast and sustainable Li-S redox reactions. Experimental results show that the obtained S@CN-nt electrodes exhibit a high sulfur utilization of 1296.2 mAh g at 0.1 C and a significant rate capability of 689.4 mAh g at the high current rate of 3C. More importantly, the capacity retention reaches 87.7% after 500 cycles. This simple strategy of engineering unique carbon-based nanostructured hosts can inspire new ideas for developing cost-effective and metal-free host materials for sulfur-based batteries.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Pt-Ni contact engineering in carbon nitride based photocatalysts for hydrogen production

  • Sayago-Carro, Rocío|||0000-0002-8662-9090
  • Piqueras-Pérez, Pablo
  • Du, Ruifeng
  • Li, Junshan|||0000-0002-1482-1972
  • Yu, Jing|||0000-0002-7620-745X
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Kubacka, Anna
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Fernández-García, Marcos|||0000-0002-9987-0289
The effect of a binary PtNi co-catalyst supported on graphitic carbon nitride nanosheets is studied in the photo-production of hydrogen from methanol:water mixtures. The physicochemical analysis provides evidence that the carbon nitride support allows the formation of highly dispersed PtNi nanoparticles with an average composition of Pt 85 % Ni 15 %. The binary system outperforms the monometallic Pt and Ni counterparts and renders an extraordinary quantum efficiency of 8.8 % for hydrogen photo-production. The formation of a PtNi alloy, with a Pt-enriched surface and electronic properties influenced by the heterometallic contact, provides high and stable activity, mostly as a consequence of the effects that the co-catalyst exerts on the charge carrier handling capability of the solid.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Brookite TiO2 Nanorods as Promising Electrochromic and Energy Storage Materials for Smart Windows

  • Xing, Congcong|||0000-0001-7674-6720
  • Yang, Linlin|||0009-0006-9953-5698
  • He, Ren|||0000-0003-3712-5539
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Zhang, Yu|||0000-0002-0332-0013
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Li, Junshan|||0000-0002-1482-1972
  • Poudel, Bed|||0000-0001-7760-2016
  • Nozariasbmarz, Amin|||0000-0003-2789-9469
  • Li, Wenjie|||0000-0003-4509-3303
  • Lim, Khak Ho|||0000-0003-3116-8589
  • Liu, Yu|||0000-0001-7313-6740
  • Llorca, Jordi|||0000-0002-7447-9582
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Electrochromic smart windows (ESWs) offer an attractive option for regulating indoor lighting conditions. Electrochromic materials based on ion insertion/desertion mechanisms also present the possibility for energy storage, thereby increasing overall energy efficiency and adding value to the system. However, current electrochromic electrodes suffer from performance degradation, long response time, and low coloration efficiency. This work aims to produce defect-engineered brookite titanium dioxide (TiO) nanorods (NRs) with different lengths and investigate their electrochromic performance as potential energy storage materials. The controllable synthesis of TiO NRs with inherent defects, along with smaller impedance and higher carrier concentrations, significantly enhances their electrochromic performance, including improved resistance to degradation, shorter response times, and enhanced coloration efficiency. The electrochromic performance of TiO NRs, particularly longer ones, is characterized by fast switching speeds (20 s for coloration and 12 s for bleaching), high coloration efficiency (84.96 cm C at a 600 nm wavelength), and good stability, highlighting their potential for advanced electrochromic smart window applications based on Li ion intercalation.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Synergistic effect of surface oxygen vacancies and hydroxyl groups on Cu-doped TiO2 photocatalyst for hydrogen evolution

  • Xing, Congcong|||0000-0001-7674-6720
  • Zhang, Zhaofu
  • Zhang, Yu|||0000-0002-0332-0013
  • Han, Xu|||0000-0001-8319-8830
  • Yang, Linlin|||0009-0006-9953-5698
  • Li, Junshan|||0000-0002-1482-1972
  • Wang, Xiang
  • Martinez, Paulina
  • Demir, Muslum
  • Piveteau, Laura
  • Florian, Pierre|||0000-0003-4306-0815
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Guo, Yuzheng
  • Llorca, Jordi|||0000-0002-7447-9582
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The intricate nature of the titanium dioxide (TiO2) photocatalytic system, influenced by Cu doping, often yields conflicting outcomes. This study addresses this complexity by examining the impact of Cu ion doping in nanostructured TiO2 to augment its photocatalytic efficacy in hydrogen generation from ethanol-water mixtures. The improved performance is primarily attributed to the generation of oxygen vacancies (Ovac) within the TiO2 lattice. By adjusting the thermal processing parameters, the chemical state of Cu is modulated to optimize photocatalytic performance. Solid-state nuclear magnetic resonance (SSNMR) and density functional theory (DFT) calculations confirm that the presence of Ovac and hydroxyl groups (OH-) surface species not only facilitates local spatial charge separation but also enhances light absorption, thereby improving photocatalytic hydrogen evolution reaction (HER) rate up to 20.2 mmol h-1 g-1 under UV light. Furthermore, a proposed mechanism involves the participation of Ovac and OH- species, supported by Mott-Schottky (M - S) plots and ultraviolet photoelectron spectroscopy (UPS), revealing that Cu-TiO2 exhibits a lower flat band potential (Efb) and smaller work function compared to TiO2. This research underscores the pivotal role of Cu ions and Ovac:OH- in advancing the photocatalytic activity of TiO2-based crystals, imparting noteworthy implications for sustainable hydrogen generation.