Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Enhanced lithium polysulfide adsorption and reaction with cobalt-doped spinel additives for robust lithium-sulfur batteries

  • Chacón Borrero, Jesús|||0000-0001-9792-6720
  • Qi, Xuede|||0009-0008-5723-3629
  • Zhang, Xuesong|||0000-0001-6685-3602
  • Berlanga-Vázquez, Armando|||0009-0003-4114-1491
  • Chang, Xingqi|||0000-0002-2604-0233
  • Montaña-Mora, Guillem|||0000-0003-1208-6836
  • Mejia-Centeno, Karol V.|||0000-0002-6353-4769
  • Rabelo Freitas, Helena
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Guardia, Pablo|||0000-0001-9076-4642
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Zhang, Chao Yue
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Sulfur-based cathodes offer a promising high-energy-density alternative to conventional lithium-ion batteries. However, their commercial viability is hindered by limited stability due to the gradual loss of active sulfur during cycling. This study addresses this challenge by introducing a cobalt-doped spinel oxide as a catalytic additive, designed to enhance the performance and stability of sulfur cathodes with minimized cobalt usage. Small amounts of cobalt doping improve the adsorption of sulfur species through stronger electronic interactions with antibonding orbitals and accelerate charge transfer, thereby promoting more efficient sulfur redox reactions. Cobalt also lowers the energy barrier for LiS formation, a critical step in the cycling process. Specifically, Co-doped MnFeO with 2.4 wt % Co demonstrates a remarkable initial capacity of 1302 mAh/g at 0.1C, excellent rate capability with 700 mAh/g at 4C, and stable cycling performance with an average capacity decay of just 0.03 % per cycle at 0.5C over 200 cycles. Overall, this work underscores the potential of cobalt-doped spinel structures as catalytic additives to mitigate the limitations of sulfur cathodes, paving the way for more stable and high-performance lithium-sulfur batteries.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Ligand-Mediated Tailoring of Self-Supported MnxOy@Ni(OH)2Nanoheterostructures with Enhanced OER Performance

  • Chacón Borrero, Jesús|||0000-0001-9792-6720
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Zhang, Xuesong|||0000-0001-6685-3602
  • Lu, Xuan|||0000-0003-2453-2805
  • Montaña-Mora, Guillem|||0000-0003-1208-6836
  • Xue, Qian
  • Berlanga-Vázquez, Armando|||0009-0003-4114-1491
  • Llorca, Jordi|||0000-0002-7447-9582
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Guardia, Pablo|||0000-0001-9076-4642
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
We report a colloidal synthesis strategy for producing MnO@Ni(OH)nanoheterostructures under mild conditions, i.e., low temperature and ambient pressure. The role of carboxylic acid ligands in directing the synthesis is systematically explored, revealing that lower ligand concentrations along with low-molecular weight molecules favor the formation of well-defined MnO@Ni(OH)heterostructures. Electrochemical characterization demonstrates that the resulting nanocomposites exhibit significantly enhanced electrochemical surface area and oxygen evolution reaction (OER) activity compared to their single-component counterparts. Specifically, MnO@Ni(OH)achieves a low overpotential of 299 mV at 10 mA cm, a Tafel slope of 61 mV dec, and a low charge transfer resistance of 9 Ω. The improved OER performance is attributed to the synergistic effect between the Ni(OH)nanosheets, which facilitate *OOH intermediate formation, and the MnOcomponent, known for its intrinsic catalytic activity. Additionally, MnOserves as a stabilizing phase and precursor to MnO, contributing to the overall durability and structural integrity of the catalyst.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Oxophilic Sn to Promote Glucose Oxidation to Formic Acid in Ni Nanoparticles

  • Montaña-Mora, Guillem|||0000-0003-1208-6836
  • Mejia-Centeno, Karol V.|||0000-0002-6353-4769
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Xue, Qian
  • Chacón Borrero, Jesús|||0000-0001-9792-6720
  • Salutari, Francesco|||0000-0002-5802-8941
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Andreu, Teresa|||0000-0002-2804-4545
  • Salazar Álvarez, Germán|||0000-0002-0671-435X
  • Güell, Frank|||0000-0002-6528-9007
  • Llorca, Jordi|||0000-0002-7447-9582
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Martínez-Alanis, Paulina R.|||0000-0003-3675-4472
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The electrochemical glucose oxidation reaction (GOR) presents an opportunity to produce hydrogen and high-value chemical products. Herein, we investigate the effect of Sn in Ni nanoparticles for the GOR to formic acid (FA). Electrochemical results show that the maximum activity is related to the amount of Ni, as Ni sites are responsible for catalyzing the GOR via the NiOOH/Ni(OH) pair. However, the GOR kinetics increases with the amount of Sn, associated with an enhancement of the OH supply to the catalyst surface for Ni(OH) reoxidation to NiOOH. NiSn nanoparticles supported on carbon nanotubes (NiSn/CNT) exhibit excellent current densities and direct GOR via C-C cleavage mechanism, obtaining FA with a Faradaic efficiency (FE) of 93 % at 1.45 V vs. reversible hydrogen electrode. GOR selectivity is further studied by varying the applied potential, glucose concentration, reaction time, and temperature. FE toward FA production decreases due to formic overoxidation to carbonates at low glucose concentrations and high applied potentials, while acetic and lactic acids are obtained with high selectivity at high glucose concentrations and 55 °C. Density functional theory calculations show that the SnO facilitates the adsorption of glucose on the surface of Ni and promotes the formation of the catalytic active Ni species.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Direct recycling of 3D-printed Co-YDZ catalysts for ethanol steam reforming

  • Razavi, Seyed Ali
  • Fargas, Gemma
  • Serrano, Isabel
  • Laguna-Bercero, Miguel Ángel
  • Vilella, Tània
  • Llanes, Luis
  • Rodríguez, Daniel
  • Ginebra, Maria-Pau
  • Llorca, Jordi
  • Morales, Miguel
Additive manufacturing enhances the catalyst performance via hierarchical design. To address environmental and resource concerns, this work aims to fabricate directly recycled 3D-printed monoliths using Direct-Ink Writing (DIW) from 100 % recovered cobalt-zirconia powders. Virgin cobalt-zirconia monoliths were firstly fabricated by DIW of 3.0–7.0 wt% Co-enriched hydrogel-based ceramic inks, followed by calcination at 600°C in a single thermal treatment. After testing the catalytic performance of monoliths in ethanol steam reforming, 3D-printed cobalt-zirconia monoliths were fragmented and subjected to subsequent milling and sieving steps to recover composite cobalt-zirconia powders with the appropriate properties for reuse in DIW. The recovered powders, inks and monoliths were microstructurally, rheologically and catalytically characterized, and then compared to catalysts constituted by virgin materials. The rheology properties of inks for the recycled and virgin monoliths presented an appropriate printability. Furthermore, the catalytic performance of recycled monoliths was close to that exhibited by virgin catalysts. This study demonstrates the feasibility of directly recycling fully 3D-printed catalysts, potentially reducing the environmental impact with a circular production model to enhance sustainability in the catalyst industry.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Engineering of Thermoelectric Composites Based on Silver Selenide in Aqueous Solution and Ambient Temperature

  • Nan, Bingfei|||0000-0002-7128-6056
  • Li, Mengyao|||0000-0002-9082-7938
  • Zhang, Yu|||0000-0002-0332-0013
  • Xiao, Ke
  • Lim, Khak Ho|||0000-0003-3116-8589
  • Chang, Cheng|||0000-0002-9515-4277
  • Han, Xu|||0000-0001-8319-8830
  • Zuo, Yong|||0000-0003-1564-467X
  • Li, Junshan|||0000-0002-1482-1972
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The direct, solid state, and reversible conversion between heat and electricity using thermoelectric devices finds numerous potential uses, especially around room temperature. However, the relatively high material processing cost limits their real applications. Silver selenide (AgSe) is one of the very few n-type thermoelectric (TE) materials for room-temperature applications. Herein, we report a room temperature, fast, and aqueous-phase synthesis approach to produce AgSe, which can be extended to other metal chalcogenides. These materials reach TE figures of merit (zT) of up to 0.76 at 380 K. To improve these values, bismuth sulfide (BiS) particles also prepared in an aqueous solution are incorporated into the AgSe matrix. In this way, a series of AgSe/BiS composites with BiS wt % of 0.5, 1.0, and 1.5 are prepared by solution blending and hot-press sintering. The presence of BiS significantly improves the Seebeck coefficient and power factor while at the same time decreasing the thermal conductivity with no apparent drop in electrical conductivity. Thus, a maximum zT value of 0.96 is achieved in the composites with 1.0 wt % BiS at 370 K. Furthermore, a high average zT value (zT) of 0.93 in the 300-390 K range is demonstrated.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Brookite TiO2 Nanorods as Promising Electrochromic and Energy Storage Materials for Smart Windows

  • Xing, Congcong|||0000-0001-7674-6720
  • Yang, Linlin|||0009-0006-9953-5698
  • He, Ren|||0000-0003-3712-5539
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Zhang, Yu|||0000-0002-0332-0013
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Li, Junshan|||0000-0002-1482-1972
  • Poudel, Bed|||0000-0001-7760-2016
  • Nozariasbmarz, Amin|||0000-0003-2789-9469
  • Li, Wenjie|||0000-0003-4509-3303
  • Lim, Khak Ho|||0000-0003-3116-8589
  • Liu, Yu|||0000-0001-7313-6740
  • Llorca, Jordi|||0000-0002-7447-9582
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Electrochromic smart windows (ESWs) offer an attractive option for regulating indoor lighting conditions. Electrochromic materials based on ion insertion/desertion mechanisms also present the possibility for energy storage, thereby increasing overall energy efficiency and adding value to the system. However, current electrochromic electrodes suffer from performance degradation, long response time, and low coloration efficiency. This work aims to produce defect-engineered brookite titanium dioxide (TiO) nanorods (NRs) with different lengths and investigate their electrochromic performance as potential energy storage materials. The controllable synthesis of TiO NRs with inherent defects, along with smaller impedance and higher carrier concentrations, significantly enhances their electrochromic performance, including improved resistance to degradation, shorter response times, and enhanced coloration efficiency. The electrochromic performance of TiO NRs, particularly longer ones, is characterized by fast switching speeds (20 s for coloration and 12 s for bleaching), high coloration efficiency (84.96 cm C at a 600 nm wavelength), and good stability, highlighting their potential for advanced electrochromic smart window applications based on Li ion intercalation.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Facet-engineered TiO2 drives photocatalytic activity and stability of supported noble metal clusters during H2 evolution

  • Chen, Yufen
  • Soler, Lluís|||0000-0003-1591-3366
  • Cazorla, Claudio|||0000-0002-6501-4513
  • Oliveras i Solà, Jana
  • Bastús, Neus G|||0000-0002-3144-7986
  • Puntes, Víctor|||0000-0001-8996-9499
  • Llorca, Jordi|||0000-0002-7447-9582
Metal clusters supported on TiO are widely used in many photocatalytic applications, including pollution control and production of solar fuels. Besides high photoactivity, stability during the photoreaction is another essential quality of high-performance photocatalysts, however systematic studies on this attribute are absent for metal clusters supported on TiO. Here we have studied, both experimentally and with first-principles simulation methods, the stability of Pt, Pd and Au clusters prepared by ball milling on nanoshaped anatase nanoparticles preferentially exposing {001} (plates) and {101} (bipyramids) facets during the photogeneration of hydrogen. It is found that Pt/TiO exhibits superior stability than Pd/TiO and Au/TiO, and that {001} facet-based photocatalysts always are more stable than their {101} analogous regardless of the considered metal species. The loss of stability associated with cluster sintering, which is facilitated by the transfer of photoexcited carriers from the metal species to the neighbouring Ti and O atoms, most significantly and detrimentally affects the H-evolution photoactivity.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Ni-Ru supported on CeO2 obtained by mechanochemical milling for catalytic hydrogen production from ammonia

  • Lucentini, Ilaria
  • Serrano, Isabel
  • Garcia, Xènia|||0000-0003-0795-4168
  • Garzón Manjón, Alba|||0000-0003-2954-1102
  • Hu, Xinxin
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Pascua-Solé, Laia
  • Prat Albert, Jordi|||0000-0002-9708-4831
  • Villalobos-Portillo, Edgar Eduardo|||0000-0003-4344-4181
  • Marini, Carlo
  • Escudero, Carlos|||0000-0001-8716-9391
  • Llorca, Jordi|||0000-0002-7447-9582
Developing active and stable catalysts for carbon-free hydrogen production is crucial to mitigate the effects of climate change. Ammonia is a promising carbon-free hydrogen source, as it has a high hydrogen content and is liquid at low pressure, which allows its easy storage and transportation. We have recently developed a nickel-based catalyst with a small content of ruthenium supported on cerium oxide, which exhibits high activity and stability in ammonia decomposition. Here, we investigate mechanochemical milling for its synthesis, a faster and less energy-consuming technique than conventional ones. Results indicate that mechanochemical synthesis increases catalytic activity compared to the conventional incipient wetness impregnation method. The interaction between the metal precursors and the support is key in fine-tuning catalytic activity, which increases linearly with oxygen vacancies in the support. Moreover, the mechanochemical method modifies the oxidation state of Ni and Ru species, with a variation depending on the precursors.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Single-Atom Catalysts with Unsaturated Co-N2 Active Sites Based on a C2N 2D-Organic Framework for Efficient Sulfur Redox Reaction

  • Yang, Dawei|||0000-0002-3842-8286
  • Wang, Jiaao|||0000-0002-4944-4951
  • Lou, Chenjie
  • Li, Mengyao|||0000-0002-9082-7938
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Ramon, Alberto
  • Li, Canhuang
  • Tang, Mingxue|||0000-0002-7282-4100
  • Henkelman, Graeme|||0000-0002-0336-7153
  • Xu, Ming
  • Li, Junshan|||0000-0002-1482-1972
  • Llorca, Jordi|||0000-0002-7447-9582
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Mitlin, David
  • Zhou, Guangmin|||0000-0002-3629-5686
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The lithium-sulfur battery (LSB) is a viable option for the next generation of energy storage systems. However, the shuttle effect of lithium polysulfides (LiPS) and the poor electrical conductivity of sulfur and lithium sulfides limit its deployment. Here, we report on a 2D-organic framework, C2N, with a high loading of low-coordination cobalt single atoms (Co-SAs/C2N) as an effective sulfur host in LSB cathodes. Experimental and computational results reveal that unsaturated Co-N2 active sites with an asymmetric electron distribution act as effective polysulfide traps, accommodating electrons from polysulfide ions to form strong Sx2--Co-N bonds. Additionally, charge transfer between LiPS and unsaturated Co-N2 active sites endows immobilized LiPS with low free energy and low electrochemical decomposition energy barriers, thus accelerating the kinetic conversion of LiPS. As a result, S@Co-SAs/C2N-based cathodes exhibit superior rate performance, impressive cycling stability, and good areal capacity at high sulfur loading, 2-fold that of commercial lithium-ion batteries. This work emphasizes the potential capabilities and promising prospects of single-atom catalysts with unsaturated coordination in LSBs.