Skip to main content

CARACTERIZACION DE CATALIZADORES EN CONDICIONES DE REACCION MEDIANTE RADIACION DE SINCROTON Y CARACTERIZACION IN SITU DE PROCESOS DE ALD

PID2021-124572OB-C33

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2021
State Plan 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre CONSORCI PER A LA CONSTRUCCIO, EQUIPAMENT I EXPLOTACIO DEL LABORATORI DE LLUM DE SINCROTO

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ni-Ru supported on CeO2 obtained by mechanochemical milling for catalytic hydrogen production from ammonia

  • Lucentini, Ilaria
  • Serrano, Isabel
  • Garcia, Xènia
  • Garzón Manjón, Alba
  • Hu, Xinxin
  • Arbiol, Jordi
  • Pascua-Solé, Laia
  • Prat, Jordi
  • Villalobos-Portillo, Edgar Eduardo
  • Marini, Carlo
  • Escudero, Carlos
  • Llorca, Jordi
Developing active and stable catalysts for carbon-free hydrogen production is crucial to mitigate the effects of climate change. Ammonia is a promising carbon-free hydrogen source, as it has a high hydrogen content and is liquid at low pressure, which allows its easy storage and transportation. We have recently developed a nickel-based catalyst with a small content of ruthenium supported on cerium oxide, which exhibits high activity and stability in ammonia decomposition. Here, we investigate mechanochemical milling for its synthesis, a faster and less energy-consuming technique than conventional ones. Results indicate that mechanochemical synthesis increases catalytic activity compared to the conventional incipient wetness impregnation method. The interaction between the metal precursors and the support is key in fine-tuning catalytic activity, which increases linearly with oxygen vacancies in the support. Moreover, the mechanochemical method modifies the oxidation state of Ni and Ru species, with a variation depending on the precursors., This work was funded by MICINN/FEDER PID2021-124572OB-C31 and PID2021-124572OB-C33 and 2021 SGR 01061 projects. J.L. is a Serra Húnter Fellow and is grateful to the ICREA Academia program. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials program and was supported by MCIN with funding from the European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Program/Generalitat de Catalunya. A.G.M. is grateful to Grant RYC2021-033479-I funded by MCIN/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Tuning amorphous-crystalline catalytic interfaces by mechanochemistry: Cu-based metallic glasses coupled with ceria for CO oxidation

  • Mirzay Shahim, Maahin
  • Nabahat, Mehran
  • Pascua Solé, Laia|||0000-0001-9791-4586
  • Serrano Carreño, M. Isabel|||0000-0002-4996-9280
  • Lucentini, Ilaria|||0000-0003-1311-9062
  • García de Andrés, Xènia|||0000-0003-0795-4168
  • Armengol Profitós, Marina
  • Agrelo Lestón, Asier|||0000-0002-4744-7278
  • Burgués Ceballos, Ignasi|||0000-0002-8183-0705
  • Jiménez Divins, Nuria|||0000-0001-6010-5419
  • Villar García, Ignacio J.
  • Pérez Dieste, Virginia
  • Escudero, Carlos
  • Marini, Carlo
  • Llorca Piqué, Jordi|||0000-0002-7447-9582
  • Pineda Soler, Eloi|||0000-0002-1871-3848
  • Bruna Escuer, Pere|||0000-0002-7411-1278
  • Fàbrega Soler, LLuís
Amorphous metallic alloys, with their liquid-like atomic-scale structure, are promising candidates for developing unprecedented heterogeneous catalysts due to their non-equilibrium, highly disordered state. This study explores the combination of copper-based metallic glasses with crystalline ceria as catalysts for CO oxidation and preferential CO oxidation. The amorphous/crystalline interfaces are synthesized mechanochemically, offering a cost-effective alternative to the use of precious metals while maintaining high catalytic activity. Key parameters of the ball milling process are optimized, namely milling time and frequency, to enhance the interaction between the disordered metal and crystalline ceria, and the new catalysts are thoroughly characterized using ex situ techniques (XRD, DSC, HAADF-STEM-EDX, H2-TPR, Raman spectroscopy, and XPS), and under operando conditions (XAFS and NEXAFS). These analyses reveal that the amorphous/crystalline architectures play a crucial role in catalytic performance. The results show that combining amorphous Cu-based metallic glasses with crystalline CeO2 delivers remarkable catalytic activity in preferential CO oxidation (T50 = 115 °C; 43.1 ± 0.4 mol CO2 min-1 gcatalyst-1), pointing to a sustainable and efficient design strategy of catalysts. This approach reduces reliance on noble metals while leveraging the synergy between structural disorder and crystallinity, thereby opening new directions for next-generation catalyst development., This work was supported by MICINN/FEDER projects PID2021- 124572OB-C31, PID2021-124572OB-C33 and PID2023-146623NBI00, Generalitat de Catalunya/AGAUR grants 2021SGR00343 and 2021SGR01061, and Maria de Maeztu Units of Excellence Programme CEX2023-001300-M funded by MICIU/AEI/10.13039/501100011033. AA is grateful to PhD grant FPI2019 PRE2019-088694. LS and IBC are grateful to the MICINN Ramon y Cajal program RYC2019-026704 and RYC2022-035399-I. JL is a Serra Húnter Fellow and is grateful to the ICREA Academia program. IJVG acknowledges support from MCIN/AEI/10.13039/501100011033 and European Union´s NextGenerationEU through grants CNS2022-135285 and PID2023-147200OB-100. HAADF-STEM-EDX was performed at the Joint Electron Microscopy Center (JEMCA) at ALBA Synchrotron with the collaboration of ALBA staff. XRD, XAS, and NEXAFS measurements were performed at the NOTOS (proposal 2023097872) and CIRCE (proposal 2023027431) beamlines at ALBA Synchrotron with the collaboration of ALBA staff., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Tuning amorphous-crystalline catalytic interfaces by mechanochemistry: Cu-based metallic glasses coupled with ceria for CO oxidation

  • Mirzay Shahim, Maahin
  • Nabahat, Mehran
  • Pascua Solé, Laia
  • Serrano Carreño, M. Isabel
  • Lucentini, Ilaria
  • García de Andrés, Xènia
  • Armengol Profitós, Marina
  • Agrelo Lestón, Asier
  • Burgués Ceballos, Ignasi
  • Jiménez Divins, Nuria
  • Villar García, Ignacio J.
  • Pérez Dieste, Virginia
  • Escudero, Carlos
  • Marini, Carlo
  • Llorca Piqué, Jordi
  • Pineda Soler, Eloi
  • Bruna Escuer, Pere
  • Fàbrega Soler, LLuís
Amorphous metallic alloys, with their liquid-like atomic-scale structure, are promising candidates for developing unprecedented heterogeneous catalysts due to their non-equilibrium, highly disordered state. This study explores the combination of copper-based metallic glasses with crystalline ceria as catalysts for CO oxidation and preferential CO oxidation. The amorphous/crystalline interfaces are synthesized mechanochemically, offering a cost-effective alternative to the use of precious metals while maintaining high catalytic activity. Key parameters of the ball milling process are optimized, namely milling time and frequency, to enhance the interaction between the disordered metal and crystalline ceria, and the new catalysts are thoroughly characterized using ex situ techniques (XRD, DSC, HAADF-STEM-EDX, H2-TPR, Raman spectroscopy, and XPS), and under operando conditions (XAFS and NEXAFS). These analyses reveal that the amorphous/crystalline architectures play a crucial role in catalytic performance. The results show that combining amorphous Cu-based metallic glasses with crystalline CeO2 delivers remarkable catalytic activity in preferential CO oxidation (T50 = 115 °C; 43.1 ± 0.4 mol CO2 min-1 gcatalyst-1), pointing to a sustainable and efficient design strategy of catalysts. This approach reduces reliance on noble metals while leveraging the synergy between structural disorder and crystallinity, thereby opening new directions for next-generation catalyst development., This work was supported by MICINN/FEDER projects PID2021- 124572OB-C31, PID2021-124572OB-C33 and PID2023-146623NBI00, Generalitat de Catalunya/AGAUR grants 2021SGR00343 and 2021SGR01061, and Maria de Maeztu Units of Excellence Programme CEX2023-001300-M funded by MICIU/AEI/10.13039/501100011033. AA is grateful to PhD grant FPI2019 PRE2019-088694. LS and IBC are grateful to the MICINN Ramon y Cajal program RYC2019-026704 and RYC2022-035399-I. JL is a Serra Húnter Fellow and is grateful to the ICREA Academia program. IJVG acknowledges support from MCIN/AEI/10.13039/501100011033 and European Union´s NextGenerationEU through grants CNS2022-135285 and PID2023-147200OB-100. HAADF-STEM-EDX was performed at the Joint Electron Microscopy Center (JEMCA) at ALBA Synchrotron with the collaboration of ALBA staff. XRD, XAS, and NEXAFS measurements were performed at the NOTOS (proposal 2023097872) and CIRCE (proposal 2023027431) beamlines at ALBA Synchrotron with the collaboration of ALBA staff., Peer Reviewed, Postprint (published version)
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Ni-Ru supported on CeO2 obtained by mechanochemical milling for catalytic hydrogen production from ammonia

  • Lucentini, Ilaria
  • Serrano, Isabel
  • Garcia, Xènia|||0000-0003-0795-4168
  • Garzón Manjón, Alba|||0000-0003-2954-1102
  • Hu, Xinxin
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Pascua-Solé, Laia
  • Prat Albert, Jordi|||0000-0002-9708-4831
  • Villalobos-Portillo, Edgar Eduardo|||0000-0003-4344-4181
  • Marini, Carlo
  • Escudero, Carlos|||0000-0001-8716-9391
  • Llorca, Jordi|||0000-0002-7447-9582
Developing active and stable catalysts for carbon-free hydrogen production is crucial to mitigate the effects of climate change. Ammonia is a promising carbon-free hydrogen source, as it has a high hydrogen content and is liquid at low pressure, which allows its easy storage and transportation. We have recently developed a nickel-based catalyst with a small content of ruthenium supported on cerium oxide, which exhibits high activity and stability in ammonia decomposition. Here, we investigate mechanochemical milling for its synthesis, a faster and less energy-consuming technique than conventional ones. Results indicate that mechanochemical synthesis increases catalytic activity compared to the conventional incipient wetness impregnation method. The interaction between the metal precursors and the support is key in fine-tuning catalytic activity, which increases linearly with oxygen vacancies in the support. Moreover, the mechanochemical method modifies the oxidation state of Ni and Ru species, with a variation depending on the precursors.