Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 185
Encontrada(s) 2 página(s)

e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

Comparison of runaway electron generation parameters in small, medium-sized and large tokamaks: a survey of experiments in COMPASS, TCV, ASDEX-Upgrade and JET

  • Plyusnin, V.V.
  • Martín Solís, José Ramón
Documento escrito por un elevado número de autores/as, sólo se referencia el/la que aparece en primer lugar y los/as autores/as pertenecientes a la UC3M., This paper presents a survey of the experiments on runaway electrons (RE) carried out recently in frames of EUROFusion Consortium in different tokamaks: COMPASS, ASDEX-Upgrade, TCV and JET. Massive gas injection (MGI) has been used in different scenarios for RE generation in small and medium-sized tokamaks to elaborate the most efficient and reliable ones for future RE experiments. New data on RE generated at disruptions in COMPASS and ASDEX-Upgrade was collected and added to the JET database. Different accessible parameters of disruptions, such as current quench rate, conversion rate of plasma current into runaways, etc have been analysed for each tokamak and compared to JET data. It was shown, that tokamaks with larger geometrical sizes provide the wider limits for spatial and temporal variation of plasma parameters during disruptions, thus extending the parameter space for RE generation. The second part of experiments was dedicated to study of RE generation in stationary discharges in COMPASS, TCV and JET. Injection of Ne/Ar have been used to mock-up the JET MGI runaway suppression experiments. Secondary RE avalanching was identified and quantified for the first time in the TCV tokamak in RE generating discharges after massive Ne injection. Simulations of the primary RE generation and secondary avalanching dynamics in stationary discharges has demonstrated that RE current fraction created via avalanching could achieve up to 70–75% of the total plasma current in TCV. Relaxations which are reminiscent the phenomena associated to the kinetic instability driven by RE have been detected in RE discharges in TCV. Macroscopic parameters of RE dominating discharges in TCV before and after onset of the instability fit well to the empirical instability criterion, which was established in the early tokamaks and examined by results of recent numerical simulations., This work has been carried out within the framework of the EUROFusion Consortium and has received funding from the EURATOM research and training programme 2014–2018 under grant agreement No 633053. IST activities also received financial support from "Fundação para a Ciência e Tecnologia" through project UID/FIS/50010/2013. A.E. Shevelev and E.M. Khilkevitch are grateful for financial support from the Ministry of Education and Science of the Russian Federation (Agreement No.14.619.21.0001, 15.08.2014, id RFMEFI61914X0001). The experiments on COMPASS were supported by the MEYS CR project No. LM2015045. The views and opinions expressed herein do not necessarily reflect those of the European Commission., Publicado
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

Runaway electron imaging spectrometry (REIS) system

  • Causa, F.
  • Gospodarczyk, M.
  • Buratti, P.
  • Carnevale, D.
  • De Angelis, R.
  • Esposito, B.
  • Grosso, A.
  • Maddaluno, G.
  • Martín Solís, José Ramón
  • Piergotti, V.
  • Popovic, Zana
  • Rocchi, G.
  • Sibio, A.
  • Sozzi, C.
  • Tilia, B.
  • Valisa, M.
  • FTU Team
A portable Runaway Electron Imaging and Spectrometry System (REIS) was developed in ENEA-Frascati to measure synchrotron radiationspectra from in-flight runaway electrons in tokamaks. The REIS is a wide-angle optical system collecting simultaneously visible and infraredemission spectra using an incoherent bundle of fibers, in a spectral range that spans from 500 nm to 2500 nm, and visible images using a CCDcolor microcamera at a rate of 25 frames/s. The REIS system is supervised and managed using a dedicated LabVIEW program to acquire datasimultaneously from three spectrometers every 20 ms (configurable down to 10 ms). An overview of the REIS architecture and acquisitionsystem and resulting experimental data obtained in FTU are presented and discussed in this paper., This work was carried out within the framework of the EUROfusion Consortium (Project No. MST2-15: Runaway Electron Imaging) and received funding from the Euratom research and training programme 2014–2018 under Grant Agreement No. 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission. The authors would like to thank M. Turnyanskiy, responsible officer for this EUROfusion project, for his continuous support and encouragement throughout this work., Publicado
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

Runaway electron generation and control

  • Esposito, B.
  • Boncagni, L.
  • Buratti, P.
  • Carnevale, D.
  • Causa, F.
  • Gospodarczyk, M.
  • Martín Solís, José Ramón
  • Popovic, Zana
  • Agostini, M.
  • Apruzzese, G
  • Bin, W.
  • Cianfarani, C.
  • De Angelis, R.
  • Granucci, G.
  • Grosso, A.
  • Maddaluno, G.
  • Marocco, D.
  • Piergotti, V.
  • Pensa, A.
  • Podda, S.
  • Pucella, G.
  • Ramogida, G.
  • Rocchi, G.
  • Riva, M.
  • Sibio, A.
  • Sozzi, C.
  • Tilia, B.
  • Tudisco, O.
  • Valisa, M.
  • FTU Team
Special issue featuring the invited talks from the 43rd EPS Conference on Plasma Physics, Leuven, 4-8 July, 2016, We present an overview of FTU experiments on runaway electron (RE) generation and control carried out through a comprehensive set of real-time (RT) diagnostics/control systems and newly installed RE diagnostics. An RE imaging spectrometer system detects visible and infrared synchrotron radiation. A Cherenkov probe measures RE escaping the plasma. A gamma camera provides hard x-ray radial profiles from RE bremsstrahlung interactions in the plasma. Experiments on the onset and suppression of RE show that the threshold electric field for RE generation is larger than that expected according to a purely collisional theory, but consistent with an increase due to synchrotron radiation losses. This might imply a lower density to be targeted with massive gas injection for RE suppression in ITER. Experiments on active control of disruption-generated RE have been performed through feedback on poloidal coils by implementing an RT boundary-reconstruction algorithm evaluated on magnetic moments., This work was carried out within the framework of the EUROfusion Consortium and received funding from the Euratom research and training programme 2014–2018 under grant agreement No 633053 (Projects MST2-9 and MST2-15). The views and opinions expressed herein do not necessarily reflect those of the European Commission. Additional financial support was received from MINECO (Spain), Projects No. ENE2012-31753 and ENE2015-66444-R., Publicado
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

The impact of magnetic shear on the dynamics of a seeded 3D filament is slab geometry

  • Gracias, William Agnelo
  • Tamain, P.
  • Serre, E.
  • Pitts, R.A.
  • García Gonzalo, Luis
Seeded filament simulations are used to study blob dynamics with the state-of-the-art TOKAM3X fluid code in the scrape-off layer (SOL) using a slab geometry. The filamentary dynamics recovered with the code are compared with previously predicted analytical blob velocity scalings while also studying the effect of field line pitch angle on these dynamics and are found to be similar. The effect of changing magnetic topology on filamentary motion is also investigated. Magnetic shear is introduced in the model by the sudden and localised variation of field line pitch angle for a narrow radially located region constituting effectively a shearing zone. Three such shear zones are tested to see how they affect filament motion. Filaments are initialised radially upstream from the shear zone and recorded as they convect towards the far-SOL side. The lowest intensity shear zone allows many of the higher amplitude filaments to pass through after dampening them. On the other hand, the highest intensity shear zones prevent all filaments from progressing to the wall beyond the shear zone and, in certain cases for high density amplitude filaments, is able to generate a new filament downstream from the shear zone., This work was granted access to the HPC resources of Aix-Marseille Université financed by the project Equip@Meso [project no. ANR-10-EQPX-29-01] of the program « Investissements d'Avenir » supervised by the Agence Nationale de la Recherche. Additional computational resources were used on the high performance URANUS computing cluster located at Universidad Carlos III de Madrid (Spain) [project no. UNC313-4E-2361]. This work was also supported in part by the Ministry of Economy and Competitivity, Spain [project no. ENE2012-38620-C02-02 and ENE2015-68265-P]. This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014-2018 [agreement no. 633053]. The views and opinions expressed herein do not necessarily reflect those of the European Commission or of the ITER Organization. ITER is the Nuclear Facility INB-174. This work was also supported by AMIDEX project KFC [no. ANR-11-IDEX-00102].
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

Study of radial heat transport in W7-X using the transfer entropy

  • Van Milligen, Boudewijn
  • Hofel, Udo
  • Hernández Nicolau, Javier
  • Hirsch, M.
  • García Gonzalo, Luis
  • Carreras Verdaguer, Benjamin A.
Autor colectivo: W7-X Team, In this work, we analyze data obtained using the electron cyclotron emission radiometer at the Wendelstein 7-X stellarator using a relatively new technique: the transfer entropy. Thus, we detect the propagation of information and find that it occurs in a stepwise fashion: we observe both 'trapping zones' and radial 'jumps', when the information is apparently skipping over intermediate positions. Using scans of the rotational transform, we observe that the 'trapping zones' appear to be associated with rational surfaces. Power scan experiments show that these 'jumps' increase in importance when power is increased, thus enhancing the effective diffusivity. The observations are interpreted in terms of a resistive magneto-hydrodynamic model, which displays behavior similar to the experimental results. The 'trapping zones' are explained in terms of zonal flows associated with rational surfaces, while the 'jumps' are ascribed to mode coupling effects, i.e. the transmission of turbulent energy via the magnetic field., Research sponsored in part by the Ministerio de Economía y Competitividad of Spain under project Nrs. ENE2015-68265-P and ENE2015-68206-P. This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014–2018 under grant agreement No 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

Overview of the JET preparation for deuterium-tritium operation with the ITER like-wall

  • Joffrin, E.
  • Martín Solís, José Ramón
Documento escrito por un elevado número de autores/as, sólo se referencia el/la que aparece en primer lugar y los/as autores/as pertenecientes a la UC3M, For the past several years, the JET scientific programme (Pamela et al 2007 Fusion Eng. Des. 82 590) has been engaged in a multi-campaign effort, including experiments in D, H and T, leading up to 2020 and the first experiments with 50%/50% D–T mixtures since 1997 and the first ever D–T plasmas with the ITER mix of plasma-facing component materials. For this purpose, a concerted physics and technology programme was launched with a view to prepare the D–T campaign (DTE2). This paper addresses the key elements developed by the JET programme directly contributing to the D–T preparation. This intense preparation includes the review of the physics basis for the D–T operational scenarios, including the fusion power predictions through first principle and integrated modelling, and the impact of isotopes in the operation and physics of D–T plasmas (thermal and particle transport, high confinement mode (H-mode) access, Be and W erosion, fuel recovery, etc). This effort also requires improving several aspects of plasma operation for DTE2, such as real time control schemes, heat load control, disruption avoidance and a mitigation system (including the installation of a new shattered pellet injector), novel ion cyclotron resonance heating schemes (such as the three-ions scheme), new diagnostics (neutron camera and spectrometer, active Alfvèn eigenmode antennas, neutral gauges, radiation hard imaging systems...) and the calibration of the JET neutron diagnostics at 14 MeV for accurate fusion power measurement. The active preparation of JET for the 2020 D–T campaign provides an incomparable source of information and a basis for the future D–T operation of ITER, and it is also foreseen that a large number of key physics issues will be addressed in support of burning plasmas., This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014–2018 and 2019–2020 under grant agreement No. 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission., Publicado
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

Overview of first Wendelstein 7-X high-performance operation

  • Klinger, T.
  • Gogoleva, Alena
  • Vela Vela, Luis Ernesto
Documento escrito por un elevado número de autores/as, sólo se referencia el/la que aparece en primer lugar y los/as autores/as pertenecientes a la UC3M., The optimized superconducting stellarator device Wendelstein 7-X (with major radius , minor radius , and plasma volume) restarted operation after the assembly of a graphite heat shield and 10 inertially cooled island divertor modules. This paper reports on the results from the first high-performance plasma operation. Glow discharge conditioning and ECRH conditioning discharges in helium turned out to be important for density and edge radiation control. Plasma densities of with central electron temperatures were routinely achieved with hydrogen gas fueling, frequently terminated by a radiative collapse. In a first stage, plasma densities up to were reached with hydrogen pellet injection and helium gas fueling. Here, the ions are indirectly heated, and at a central density of a temperature of with was transiently accomplished, which corresponds to with a peak diamagnetic energy of and volume-averaged normalized plasma pressure . The routine access to high plasma densities was opened with boronization of the first wall. After boronization, the oxygen impurity content was reduced by a factor of 10, the carbon impurity content by a factor of 5. The reduced (edge) plasma radiation level gives routinely access to higher densities without radiation collapse, e.g. well above line integrated density and central temperatures at moderate ECRH power. Both X2 and O2 mode ECRH schemes were successfully applied. Core turbulence was measured with a phase contrast imaging diagnostic and suppression of turbulence during pellet injection was observed., This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training program 2014-2018 and 2019-2020 under grant agreement No. 633053.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

Overview of the FTU results

  • Pucella, G.
  • Martín Solís, José Ramón
  • Popovic, Zana
Documento escrito por un elevado número de autores/as, solo se referencia el/la que aparece en primer lugar y los/as autores/as pertenecientes a la UC3M., Since the 2016 IAEA Fusion Energy Conference, FTU operations have been mainly devoted to experiments on runaway electrons and investigations into a tin liquid limiter; other experiments have involved studies of elongated plasmas and dust. The tearing mode onset in the high density regime has been studied by means of the linear resistive code MARS, and the highly collisional regimes have been investigated. New diagnostics, such as a runaway electron imaging spectroscopy system for in-flight runaway studies and a triple Cherenkov probe for the measurement of escaping electrons, have been successfully installed and tested, and new capabilities of the collective Thomson scattering and the laser induced breakdown spectroscopy diagnostics have been explored., This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014–2018 and 2019–2020 under Grant Agreement No. 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

Analysis of runaway electron discharge formation during Joint European Torus plasma start-up

  • De Vries, P. C.
  • Gribov, Y.
  • Martín Solís, José Ramón
  • Mineev, A. B.
  • Sinha, J.
  • Sips, A. C. C.
  • Kiptily, V.
  • Loarte, A.
Joint European Torus (JET) plasma initiations that form a significant quantity of runaway electrons have been studied. It is shown that there is no direct relationship between the prefill pressure and breakdown electric field and signs of runaway electrons during the plasma initiation. Runaway electron generation is determined by the electric field and density development at and after burn-through. A clear criterion of density and electric field at one given point in time, which would ensure the avoidance of runaway electron generation, cannot be determined, because the timescales for the formation of runaway electrons and for the dynamics of the density differ significantly. Moreover, the formation process can be reversed, reducing the influence of runaway electrons on the discharge. Ensuring a high enough density will reduce the likelihood that runaway electron discharges are formed. It is also found that at JET the electric field often exceeds the critical electric field during the early stages of the current ramp-up phase, even when no signs of runaway electrons are present. Expected runaway current dynamics have been analysed using the discharge circuit equation. The comparison of the expected runaway electron current dynamics shows it to be significantly slower compared to theoretical expectations in the presence of a hot and dense thermal background plasma. This could be explained by an enhanced critical electric field and/or a reduced confinement of runaway electrons. The latter is shown to be affected by bursts of magnetohydrodynamic activity that are characteristic during the current ramp-up. The development of discharges in which the current is fully carried by runaway electrons happens on a slow timescale of several seconds, limited by the available flux. Such timescales are sufficient for improved active control of these events, avoiding runaway currents at plasma initiation exceeding values at which they could damage in-vessel components. The results provide insight into the improvement and interpretation of self-consistent modelling of runaway electron generation during the start-up of International Thermonuclear Experimental Reactor discharges., This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom Research and Training Programme 2014–2018 and 2019–2020 under grant agreement No 633053 and from the RCUK [Grant Numbers EP/P012450/1].
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

Overview of progress in European medium sized tokamaks towards an integrated plasma-edge/wall solution

  • Baciero, A.
  • Castejón, F.
  • Castro, R.
  • Martín Solís, José Ramón
  • Pereira, A.
  • Popovic, Zana
  • Rattá, G.A.
  • Vega, J.
Este documento tiene más de 500 autores., This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014–2018 under grant agreement No 633053.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

The Radial Propagation of Heat in Strongly Driven Non-Equilibrium Fusion Plasmas

  • Van Milligen, Boudewijn
  • Carreras Verdaguer, Benjamin A.
  • García Gonzalo, Luis
  • Hernández Nicolau, Javier
Heat transport is studied in strongly heated fusion plasmas, far from thermodynamic equilibrium. The radial propagation of perturbations is studied using a technique based on the transfer entropy. Three different magnetic confinement devices are studied, and similar results are obtained. "Minor transport barriers" are detected that tend to form near rational magnetic surfaces, thought to be associated with zonal flows. Occasionally, heat transport "jumps" over these barriers, and this "jumping" behavior seems to increase in intensity when the heating power is raised, suggesting an explanation for the ubiquitous phenomenon of "power degradation" observed in magnetically confined plasmas. Reinterpreting the analysis results in terms of a continuous time random walk, "fast" and "slow" transport channels can be discerned. The cited results can partially be understood in the framework of a resistive Magneto-HydroDynamic model. The picture that emerges shows that plasma self-organization and competing transport mechanisms are essential ingredients for a fuller understanding of heat transport in fusion plasmas., Research sponsored in part by the Ministerio de Economía y Competitividad of Spain under Project No. ENE2015-68206-P and ENE2015-68265-P. This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training program 2014-2018 and 2019-2020 under Grant Agreement No. 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

Demonstration of reduced neoclassical energy transport in Wendelstein 7-X

  • Beidler, C. D.
  • Gogoleva, Alena
  • Vela Vela, Luis Ernesto
Documento escrito por un elevado número de autores/as, solo se referencia el/la que aparece en primer lugar y los/as autores/as pertenecientes a la UC3M., Beidler, C. D., et al. (2021). Publisher Correction: Demonstration of reduced neoclassical energy transport in Wendelstein 7-X. Nature, 598(7882), E5., Research on magnetic confinement of high-temperature plasmas has the ultimate goal of harnessing nuclear fusion for the production of electricity. Although the tokamak1 is the leading toroidal magnetic-confinement concept, it is not without shortcomings and the fusion community has therefore also pursued alternative concepts such as the stellarator. Unlike axisymmetric tokamaks, stellarators possess a three-dimensional (3D) magnetic field geometry. The availability of this additional dimension opens up an extensive configuration space for computational optimization of both the field geometry itself and the current-carrying coils that produce it. Such an optimization was undertaken in designing Wendelstein 7-X (W7-X), a large helical-axis advanced stellarator (HELIAS), which began operation in 2015 at Greifswald, Germany. A major drawback of 3D magnetic field geometry, however, is that it introduces a strong temperature dependence into the stellarator's non-turbulent 'neoclassical' energy transport. Indeed, such energy losses will become prohibitive in high-temperature reactor plasmas unless a strong reduction of the geometrical factor associated with this transport can be achieved; such a reduction was therefore a principal goal of the design of W7-X. In spite of the modest heating power currently available, W7-X has already been able to achieve high-temperature plasma conditions during its 2017 and 2018 experimental campaigns, producing record values of the fusion triple product for such stellarator plasmas. The triple product of plasma density, ion temperature and energy confinement time is used in fusion research as a figure of merit, as it must attain a certain threshold value before net-energy-producing operation of a reactor becomes possible. Here we demonstrate that such record values provide evidence for reduced neoclassical energy transport in W7-X, as the plasma profiles that produced these results could not have been obtained in stellarators lacking a comparably high level of neoclassical optimization., This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014-2018 and 2019-2020 under grant agreement no. 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

Runaway electron beam control

  • Carnevale, D.
  • Martín Solís, José Ramón
  • Popovic, Zana
Documento escrito por un elevado número de autores/as, solo se referencia el/la que aparece en primer lugar y los/as autores/as pertenecientes a la UC3M., Post-disruption runaway electron (RE) beams in tokamaks with large current can cause deep melting of the vessel and are one of the major concerns for ITER operations. Consequently, a considerable effort is provided by the scientific community in order to test RE mitigation strategies. We present an overview of the results obtained at FTU and TCV controlling the current and position of RE beams to improve safety and repeatability of mitigation studies such as massive gas (MGI) and shattered pellet injections (SPI). We show that the proposed RE beam controller (REB-C) implemented at FTU and TCV is effective and that current reduction of the beam can be performed via the central solenoid reducing the energy of REs, providing an alternative/parallel mitigation strategy to MGI/SPI. Experimental results show that, meanwhile deuterium pellets injected on a fully formed RE beam are ablated but do not improve RE energy dissipation rate, heavy metals injected by a laser blow off system on low-density flat-top discharges with a high level of RE seeding seem to induce disruptions expelling REs. Instabilities during the RE beam plateau phase have shown to enhance losses of REs, expelled from the beam core. Then, with the aim of triggering instabilities to increase RE losses, an oscillating loop voltage has been tested on RE beam plateau phase at TCV revealing, for the first time, what seems to be a full conversion from runaway to ohmic current. We finally report progresses in the design of control strategies at JET in view of the incoming SPI mitigation experiments., This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014–2018 under grant agreement No 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

Major results from the first plasma campaign of the Wendelstein 7-X stellarator

  • Wolf, R. C
  • Gogoleva, Alena
  • Vela Vela, Luis Ernesto
After completing the main construction phase of Wendelstein 7-X (W7-X) and successfully commissioning the device, first plasma operation started at the end of 2015. Integral commissioning of plasma start-up and operation using electron cyclotron resonance heating (ECRH) and an extensive set of plasma diagnostics have been completed, allowing initial physics studies during the first operational campaign. Both in helium and hydrogen, plasma breakdown was easily achieved. Gaining experience with plasma vessel conditioning, discharge lengths could be extended gradually. Eventually, discharges lasted up to 6 s, reaching an injected energy of 4 MJ, which is twice the limit originally agreed for the limiter configuration employed during the first operational campaign. At power levels of 4 MW central electron densities reached 3 x 1019 m-3, central electron temperatures reached values of 7 keV and ion temperatures reached just above 2 keV. Important physics studies during this first operational phase include a first assessment of power balance and energy confinement, ECRH power deposition experiments, 2nd harmonic O-mode ECRH using multi-pass absorption, and current drive experiments using electron cyclotron current drive. As in many plasma discharges the electron temperature exceeds the ion temperature significantly, these plasmas are governed by core electron root confinement showing a strong positive electric field in the plasma centre., This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the EURATOM research and training programme 2014-2018 under grant agreement No 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

Filaments in the edge confinement region of TJ-II

  • Van Milligen, B.Ph.
  • Hernández Nicolau, Javier
  • Liu, B.
  • Grenfell, G.
  • Losada, U.
  • Carreras Verdaguer, Benjamin A.
  • García Gonzalo, Luis
  • Hidalgo, C.
Autor colectivo: TJ-II Team, Floating potential measurements from two remote reciprocating probes in the plasma edge region of the TJ-II stellarator are analyzed using the transfer entropy, revealing the spatial dimensions and propagation properties of filamentary structures. The results are corroborated by performing simulations with a resistive MHD model and analyzing data from synthetic diagnostics. The transfer entropy captures the rotation of the filaments and allows the calculating of their rotation velocity. This deduced velocity was compared to the (known) poloidal velocity of the plasma and showed a relatively good agreement., The authors would like to thank the TJ-II team for its continued support. Research sponsored in part by the Ministerio de Economía y Competitividad of Spain under project Nrs. ENE2015-68265-P and ENE2015-68206-P. J.H.N. acknowledges financial support from fellowship BES-2013-066825. This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014–2018 under grant agreement No 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

Overview of progress in European medium sized tokamaks towards an integrated plasma-edge/wall solution

  • Garcia Gonzalez, Julia
  • Lázaro Blanco, Antonio
  • Martín Solís, José Ramón
  • Schneider, Michael
  • Silva Vazquez, Andres
  • Simpson, James
  • Vicente Lorente, Jose
  • Martin Lopez, Pablo
  • Martin, Y.
  • Garcia, J.
  • Lazaros, A.
  • Schneider, M.
  • Silva, A.
  • Simpson, J.
  • Vicente, J.
This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014–2018 under grant agreement No 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

Modeling transport across the running-sandpile cellular automaton by means of fractional transport equations

  • Sánchez Fernández, Luis Raúl
  • Newman, D.E.
  • Mier Maza, Jose Angel
Fractional transport equations are used to build an effective model for transport across the running sandpile cellular automaton [Hwa et al., Phys. Rev. A 45, 7002 (1992)]. It is shown that both temporal and spatial fractional derivatives must be considered to properly reproduce the sandpile transport features, which are governed by self-organized criticality, at least over sufficiently long or large scales. In contrast to previous applications of fractional transport equations to other systems, the specifics of sand motion require in this case that the spatial fractional derivatives used for the running sandpile must be of the completely asymmetrical Riesz-Feller type. Appropriate values for the fractional exponents that define these derivatives in the case of the running sandpile are obtained numerically., This research has been sponsored in part by Ministerio de Economía y Competitividad of Spain under Projects No. ENE2015-68265-P and No. ENE2015-66444-R. Research was also supported in part by DOE-OFES Grant No. DE-FG02-04ER5741 at University of Alaska. This work has also been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014-2018 under Grant No. 633053 for the project WP17-ER/ENEA-10. The views and opinions expressed herein do not necessarily reflect those of the European Commission. Sandpile automata simulations have been run in Uranus, a supercomputer cluster at Universidad Carlos III de Madrid (Spain) that has been funded by the Spanish Government via the national projects UNC313-4E-2361, ENE2009-12213-C03-03, ENE2012-33219, and ENE2012-31753. Fruitful interactions with members of the ABIGMAP research network, funded by the Spanish Project MAT2015-69777-REDT, are also acknowledged.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

The impact of rational surfaces on radial heat transport in TJ-II

  • Van Milligen, B.Ph.
  • Hernández Nicolau, Javier
  • García Gonzalo, Luis
  • Carreras Verdaguer, Benjamin A.
  • Hidalgo, C.
Autor colectivo: TJ-II Team, In this work, we study the outward propagation of temperature perturbations. For this purpose, we apply an advanced analysis technique, transfer entropy, to ECE measurements performed in ECR heated discharges at the low-shear stellarator TJ-II. We observe that the propagation of these perturbations is not smooth, but is slowed down at specific radial positions, near 'trapping zones' characterized by long time lags with respect to the perturbation origin. We also detect instances of rapid or instantaneous (non-local) propagation, in which perturbations appear to 'jump over' specific radial regions. The analysis of perturbations introduced in a resistive magneto-hydrodynamic model of the plasma leads to similar results. The radial regions corresponding to slow radial transport are identified with maxima of the flow shear associated with rational surfaces (mini-transport barriers). The non-local interactions are ascribed to MHD mode coupling effects., The authors would like the TJ-II team for its continued support. Research sponsored in part by the Ministerio de Economía y Competitividad of Spain under project Nrs. ENE2015-68265-P and ENE2015-68206-P. J.H.N. acknowledges financial support from fellowship BES-2013-066825. This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014–2018 under grant agreement No 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

Overview of the FTU results

  • Pucella, G.
  • Alessi, E.
  • Amicucci, L.
  • Angelini, B.
  • Apicella, M.L.
  • Apruzzese, G
  • Artaserse, G.
  • Belli, F.
  • Bin, W.
  • Boncagni, L.
  • Botrugno, A.
  • Briguglio, S.
  • Bruschi, A.
  • Buratti, P.
  • Calabro, G.
  • Cappelli, M.
  • Cardinali, A.
  • Castaldo, C.
  • Causa, F.
  • Ceccuzzi, S.
  • Centioli, C.
  • Cesario, R.
  • Cianfarani, C.
  • Claps, G.
  • Cocilovo, V.
  • Cordella, F.
  • Crisanti, F.
  • D'Arcangelo, O.
  • De Angeli, M.
  • Di Troia, C.
  • Esposito, B.
  • Farina, D.
  • Figini, L.
  • Fogaccia, G.
  • Frigione, D.
  • Fusco, Virginia
  • Gabellieri, L.
  • Garavaglia, S.
  • Giovannozzi, E
  • Granucci, G.
  • Iafrati, M.
  • Iannone, F.
  • Lontano, M.
  • Maddaluno, G.
  • Magagnino, S.
  • Marinucci, M.
  • Marocco, D.
  • Mazzitelli, G.
  • Mazzotta, C.
  • Milovanov, A.
  • Minelli, D.
  • Mirizzi, F.C.
  • Moro, A.
  • Nowak, S.
  • Pacella, D.
  • Panaccione, L.
  • Panella, M.
  • Pericoli-Ridolfini, V.
  • Pizzuto, A.
  • Podda, S.
  • Ramogida, G.
  • Ravera, G.
  • Ricci, D.
  • Romano, A.
  • Sozzi, C.
  • Tuccillo, A.A.
  • Tudisco, O.
  • Viola, B.
  • Vitale, V.
  • Vlad, G.
  • Zerbini, M.
  • Zonca, F.
  • Aquilini, M.
  • Cefali, P.
  • Di Ferdinando, E.
  • Di Giovenale, S.
  • Giacomi, G.
  • Grosso, A.
  • Mellera, V.
  • Mezzacappa, M.
  • Pensa, A.
  • Petrolini, P.
  • Piergotti, V.
  • Raspante, B.
  • Rocchi, G.
  • Sibio, A.
  • Tilia, B.
  • Tulli, R.
  • Vellucci, M.
  • Zannetti, D.
  • Bogdanovic-Radovic, I.
  • Carnevale, D.
  • Casolari, A.
  • Ciotti, M.
  • Conti, C.
  • Dinca, P.P.
  • Dolci, V.
  • Galperti, C.
  • Gospodarczyk, M.
  • Grosso, G.
  • Lubiako, L.
  • Lungu, M.
  • Martín Solís, José Ramón
  • Meineri, C.
  • Murtas, F.
  • Nardone, A.
  • Orsitto, F. P.
  • Perelli Cippo, E.
  • Popovic, Zana
  • Ripamonti, D.
  • Simonetto, A
  • Tartari, U
Experiments on runaway electrons have been performed for the determination of the critical electric field for runaway generation. A large database of post-disruption runaway beams has been analyzed in order to identify linear dynamical models for new position and current runaway beam controllers, and experiments of electron cyclotron assisted plasma start-up have shown the presence of runaway electrons also below the expected electric field threshold, indicating that the radio-frequency power acts as seeding for fast electrons. A linear micro-stability analysis of neon-doped pulses has been carried out to investigate the mechanisms leading to the observed density peaking. A study of the ion drift effects on the MARFE instability has been performed and the peaking of density profile in the high density regime has been well reproduced using a thermo-diffusive pinch in the particle transport equation. The study of the density limit performed in the past has been extended towards lower values of toroidal magnetic field and plasma current. The analysis of the linear stability of the 2/1 tearing mode observed in high density plasmas has highlighted a destabilization with increasing peaking of the current profile during the density ramp-up, while the final phase of the mode temporal evolution is characterized by limit cycles on the amplitude/frequency plane. A liquid lithium limiter with thermal load capability up to 10 MW m−2 has been tested. The pulse duration has been extended up to 4.5 s and elongated configurations have been obtained for 3.5 s, with the X-point just outside the plasma chamber. A W/Fe sample has been exposed in the scrape-off layer in order to study the sputtering of Fe and the W enrichment of the surface layer. Dusts have been collected and analyzed, showing that the metallic population exhibits a high fraction of magnetic grains. A new diagnostic for in-flight runaway electron studies has allowed the image and the visible/infrared spectrum of the forward and backward synchrotron radiation to be provided simultaneously. A fast infrared camera for thermo-graphic analysis has provided the pattern of the toroidal limiter heating by disruption heat loads, and a triple-GEM detector has been tested for soft x-ray diagnostics. The collective Thomson scattering diagnostic has been upgraded and used for investigations on parametric decay instability excitation by electron cyclotron beams correlated with magnetic islands, and new capabilities of the Cherenkov probe have been explored in the presence of beta-induced Alfvén eigenmodes associated to high amplitude magnetic islands., This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014-2018 under grant agreement No 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission., Publicado
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

Overview of the JET results in support to ITER

  • Litaudon, X.
  • Martín Solís, José Ramón
Documento escrito por un elevado número de autores/as, sólo se referencia el/la que aparece en primer lugar y los/as autores/as pertenecientes a la UC3M., The 2014–2016 JET results are reviewed in the light of their significance for optimising the ITER research plan for the active and non-active operation. More than 60 h of plasma operation with ITER first wall materials successfully took place since its installation in 2011. New multi-machine scaling of the type I-ELM divertor energy flux density to ITER is supported by first principle modelling. ITER relevant disruption experiments and first principle modelling are reported with a set of three disruption mitigation valves mimicking the ITER setup. Insights of the L–H power threshold in Deuterium and Hydrogen are given, stressing the importance of the magnetic configurations and the recent measurements of fine-scale structures in the edge radial electric. Dimensionless scans of the core and pedestal confinement provide new information to elucidate the importance of the first wall material on the fusion performance. H-mode plasmas at ITER triangularity (H  =  1 at β N ~ 1.8 and n/n GW ~ 0.6) have been sustained at 2 MA during 5 s. The ITER neutronics codes have been validated on high performance experiments. Prospects for the coming D–T campaign and 14 MeV neutron calibration strategy are reviewed., The corresponding author would like to warmly acknowledge the impressive collective work of the JET Task Force Leaders, the JET Project Leaders, the JET contributors, the JET operator, the JET Exploitation Unit and the EUROfusion Programme Management Unit for achieving the scientific results reported in this overview paper. In addition, the corresponding author would like to acknowledge valuable scientific discussions and inputs from the JET international partners, and, in particular from his colleagues at ITER Organization Central Team. This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014–2018 under grant agreement No 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission., Publicado
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

3D effects on transport and plasma control in the TJ-II stellarator

  • Castejón, F.
  • Bustos Molina, Andrés de
  • García Gonzalo, Luis
  • Liu, Bing
  • Martínez, M.
The effects of 3D geometry are explored in TJ-II from two relevant points of view: neoclassical transport and modification of stability and dispersion relation of waves. Particle fuelling and impurity transport are studied considering the 3D transport properties, paying attention to both neoclassical transport and other possible mechanisms. The effects of the 3D magnetic topology on stability, confinement and Alfven Eigenmodes properties are also explored, showing the possibility of controlling Alfven modes by modifying the configuration; the onset of modes similar to geodesic acoustic modes are driven by fast electrons or fast ions; and the weak effect of magnetic well on confinement. Finally, we show innovative power exhaust scenarios using liquid metals., This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014-2018 under grant agreement No 633053. The views and opinions expressed herein do not necessarily reflect those of the European Comission. This work has been also funded by the Spanish Ministerio de Economía y Competitividad under Projects ENE2013-48109-P, ENE2013-48679-R, ENE2014-52174-P, ENE2014-58918-R, ENE2014-56517-R, ENE2014-56517-R, ENE2015-64914-C3-1-R, ENE2015-70142-P. Research and data analysis done by Kurchatov team (chapters 2, 3 and 7) were funded by Russian Science Foundation, Project 14-22-00193. The work of AVM was partly supported by the Competitiveness Program of NRNU MEPhI.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

The role of magnetic islands in modifying long range temporal correlations of density fluctuations and local heat transport

  • Van Milligen, B.Ph.
  • Estrada, T.
  • García Gonzalo, Luis
  • López Bruna, Daniel
  • Carreras Verdaguer, Benjamin A.
  • Xu, Y.
  • Ochando, M.
  • Hidalgo, C.
  • Reynolds Barredo, José Miguel
  • López Fraguas, A.
This work explores the relation between magnetic islands, long range temporal correlations and heat transport. A low order rational surface (t = 3/2) was purposely scanned outward through an electron cyclotron resonance heated (ECRH) plasma in the TJ-II stellarator. Density turbulence and the poloidal flow velocity were characterized using a two channel Doppler reflectometer. Simultaneously, the ECRH power was modulated to characterize heat transport, using measurements from a 12 channel electron cyclotron emission diagnostic. A systematic variation of the poloidal velocity was found to be associated with the t = 3/2 rational surface. Near the rational surface, the Hurst exponent, quantifying the nature of long-range correlations, was reduced below 0.5 (indicating subdiffusion), while at radii smaller than that of the rational surface, it was found to be significantly enhanced (superdiffusion). In the latter region, heat transport was enhanced as well, thus establishing a link between density fluctuations and anomalous heat transport. The observed variation of the Hurst exponent was consistent with a magnetohydrodynamic turbulence simulation., Research sponsored in part by the Ministerio de Economía y Competitividad of Spain under project Nrs. ENE2012-38620-C02-01, ENE2012-38620-C02-02, ENE2012-30832, and ENE2013-48109-P. This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014-2018 under grant agreement No 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission.
Digibug. Repositorio Institucional de la Universidad de Granada
Publication Contribución de congreso (ConferenceOutput)

Radioisotope production at the IFMIF-DONES facility

  • Praena Rodríguez, Antonio Javier
  • Arias De Saavedra Alias, Fernando|||0000-0001-9895-8740
  • Porras Sánchez, José Ignacio|||0000-0003-0754-8717
This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014-2018 and 2019-2020 under grant agreement No 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission. This work was supported by the Spanish projects FIS2015-69941-C2-1-P (MINECO-FEDER, EU), A-FQM-371-UGR18 (Prog. Operativo FEDER Andalucia 2014-2020), the Spanish Association Against Cancer (AECC) (Grant No. PS16163811PORR), and the sponsors of the University of Granada Chair Neutrons for Medicine: Fundacion ACS, Capitan Antonio and La Kuadrilla., The International Fusion Materials Irradiation Facility - Demo Oriented NEutron Source (IFMIF-DONES) is a single-sited novel Research Infrastructure for testing, validation and qualification of the materials to be used in a fusion reactor. Recently, IFMIF-DONES has been declared of interest by ESFRI (European Strategy Forum on Research Infrastructures) and its European host city would be Granada (Spain). In spite the first and most important application of IFMIF-DONES related to fusion technology, the unprecedented neutron flux available could be exploited without modifying the routine operation of IFMIF-DONES. Thus, it is already planned an experimental hall for a complementary program with neutrons. Also, a complementary program on the use of the deuteron beam could help IFMIF-DONES to be more sustainable. In the present work, we study radioisotope production with deuterons of Lu-177. The results show the viability of IFMIF-DONES for such production in terms of the needs of a territory of small-medium size. Also the study suggests that new nuclear data at higher deuteron energies are mandatory for an accurate study in this field., Euratom 633053, Spanish project (MINECO-FEDER, EU) FIS2015-69941-C2-1-P, Spanish project (Prog. Operativo FEDER Andalucia 2014-2020) A-FQM-371-UGR18, Spanish Association Against Cancer (AECC) PS16163811PORR, University of Granada Chair Neutrons for Medicine: Fundacion ACS
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Experimental Determination of Hydrogen Isotope Transport Parameters in Vanadium

  • Malo, Marta
  • Peñalva Bengoa, Igor
  • Azkurreta, Jon
  • Garcinuño, Belit
  • Liu, Hao-Dong
  • Rapisarda, David
  • Zhou, Hai-Shan
  • Luo, Guang-Nan
[EN] Deuterium permeation through vanadium membranes in a wide range of pressures and the temperature range ~250–550 °C was experimentally investigated. Measurements on the same material were carried out in three laboratories with different features for an extended characterization and for cross-check validation. A unified equation for deuterium permeability in pure vanadium (99%) was provided as Φ=1.27×10−4⋅e−8667/T mol m−1 s−1 Pa−0.5, which represents a significant progress for the characterization of the transport properties in this material, given the spread of data, which can currently be found in the literature. Adsorption and recombination rate constants were also measured for hydrogen and deuterium at low pressure for the same range of temperatures. Finally, the influence of the surface roughness was examined by measuring samples with different surface finish., Part of this work was carried out within the framework of the EUROfusion Consortium and received funding from the Euratom research and training programme 2014–2018 and 2019–2020 under grant agreement No 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Collision cascade effects near an edge dislocation dipole in alpha-Fe: Induced dislocation mobility and enhanced defect clustering

  • Heredia-Avalos, Santiago
  • Denton Zanello, Cristian D.
  • Moreno Marín, Juan Carlos
  • Martinez, Enrique
  • Caturla, Maria J.
  • Caturla, Maria J.|||/items/885d8f6b-b087-40fc-b47a-fd3e84c115b1
  • Denton Zanello, Cristian D.|||/items/8f6e1f05-0af2-4dd1-bb48-3852249d1e57
  • Heredia-Avalos, Santiago|||/items/0e710279-5389-44f5-817a-33ca1ab96de2
  • Moreno Marín, Juan Carlos|||/items/efd9f4e2-12e5-4314-bf2f-da1c3dd0cf4e
Collision cascades near a 1/2⟨111⟩{110} edge dipole in alpha-iron have been studied using molecular dynamics simulations for a recoil energy of 20 keV and two temperatures, 20 K and 300 K. These simulations show that the collision cascade induces the migration of the dislocations through glide along its slip plane. The motion of the dislocations starts at the peak of the collision cascade and expands a time scale much longer than the cascade duration, until restoring the equilibrium distance of the dipole, regardless of the damage produced by the cascade. At the initial stages, kinks are formed at the dislocation that enhance glide. When defects reach the dislocations, jogs are produced. We show that the initial dislocation motion is triggered by the shock wave of the collision cascade. The cascade morphology is also strongly influenced by the presence of the dislocations, having an elongated form at the peak of the displacement, which demonstrates the strong interaction of the dislocations with the cascade even at the early stages. Finally, we show that larger vacancy clusters are formed in the presence of dislocations compared to isolated cascades and that these clusters are larger for 300 K compared to 20 K.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publication Artículo científico (JournalArticle)

Electrostatic gyrokinetic simulations in Wendelstein 7-X geometry: benchmark between the codes stella and GENE

  • González-Jerez, A.
  • Xanthopoulos, P.
  • García-Regaña, J.M.
  • Calvo, I.
  • Alcusón, J.A.
  • Bañón Navarro, A.
  • Barnes, M.
  • Parra, F.I.
  • Geiger, J.
The first experimental campaigns have proven that, due to the optimization of the magnetic configuration with respect to neoclassical transport, the contribution of turbulence is essential to understand and predict the total particle and energy transport in Wendelstein 7-X (W7-X). This has spurred much work on gyrokinetic modelling for the interpretation of the available experimental results and for the preparation of the next campaigns. At the same time, new stellarator gyrokinetic codes have just been or are being developed. It is therefore desirable to have a sufficiently complete, documented and verified set of gyrokinetic simulations in W7-X geometry against which new codes or upgrades of existing codes can be tested and benchmarked. This paper attempts to provide such a set of simulations in the form of a comprehensive benchmark between the recently developed code stella and the well-established code GENE. The benchmark consists of electrostatic gyrokinetic simulations in the W7-X magnetic geometry and includes different flux tubes, linear ion-temperature-gradient (ITG) and trapped-electron-mode stability analyses, computation of linear zonal-flow responses and calculation of ITG-driven heat fluxes.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publication Artículo científico (JournalArticle)

Experimental confirmation of efficient island divertor operation and successful neoclassical transport optimization in Wendelstein 7-X

  • Alcusón, J.A.
We present recent highlights from the most recent operation phases of Wendelstein 7-X, the most advanced stellarator in the world. Stable detachment with good particle exhaust, low impurity content, and energy confinement times exceeding 100 ms, have been maintained for tens of seconds. Pellet fueling allows for plasma phases with reduced ion-temperature-gradient turbulence, and during such phases, the overall confinement is so good (energy confinement times often exceeding 200 ms) that the attained density and temperature profiles would not have been possible in less optimized devices, since they would have had neoclassical transport losses exceeding the heating applied in W7-X. This provides proof that the reduction of neoclassical transport through magnetic field optimization is successful. W7-X plasmas generally show good impurity screening and high plasma purity, but there is evidence of longer impurity confinement times during turbulence-suppressed phases.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publication Artículo científico (JournalArticle)

Phase contrast imaging measurements and numerical simulations of turbulent density fluctuations in gas-fuelled ECRH discharges in Wendelstein 7-X

  • Bähner, J.-P.
  • Alcusón, J.A.
  • Hansen, S.K.
  • von Stechow, A.
  • Grulke, O.
  • Windisch, T.
  • Smith, H.M.
  • Huang, Z.
  • Edlund, E.M.
  • Porkolab, M.
  • Beurskens, M.N.A.
  • Bozhenkov, S.A.
  • Ford, O.P.
  • Vanó, L.
  • Langenberg, A.
  • Pablant, N.
  • Plunk, G.G.
  • Bañon Navarro, A.
  • Jenko, F.
  • The W7-X Team
The fundamental nature of turbulent density fluctuations in standard Wendelstein 7-X (W7-X) stellarator discharges is investigated experimentally via phase contrast imaging (PCI) in combination with gyrokinetic simulations with the code GENE. We find that density fluctuations are ion-temperature-gradient-driven and radially localised in the outer half of the plasma. It is shown that the line-integrated PCI measurements cover the right range of wavenumbers and a favourable toroidal and poloidal location to capture some of the strongest density fluctuations in W7-X. Due to the radial localisation of fluctuations, measured wavenumber–frequency spectra exhibit a dominant phase velocity, which can be related to the E × B rotation velocity at the radial position of a well in the neoclassical radial electric field. The match is robust against variations of heating power and line-integrated density, which is partly due to the localisation of fluctuations and partly due to effects of the radial gradient in the E × B velocity profile on the wavenumber–frequency spectrum. The latter effect is studied with a newly built synthetic PCI diagnostic and global gyrokinetic simulations with GENE-3D.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publication Artículo científico (JournalArticle)

Heat pulse propagation and anomalous electron heat transport measurements on the optimized stellarator W7-X

  • Weir, G.M.
  • Xanthopoulos, P.
  • Hirsch, M.
  • Höfel, U.
  • Stange, T.
  • Pablant, N.
  • Grulke, O.
  • Äkäslompolo, S.
  • Alcusón, J.A.
  • Bozhenkov, S.
  • Beurskens, M.
  • Dinklage, A.
  • Fuchert, G.
  • Geiger, J.
  • Landreman, M.
  • Langenberg, A.
  • Lazerson, S.
  • Marushchenko, N.
  • Pasch, E.
  • Schilling, J.
  • Scott, E.R.
  • Turkin, Y.
  • Klinger, T.
  • The W7-X Team
The optimized stellarator Wendelstein 7-X (W7-X) is designed to have an approximately quasi-isodynamic magnetic configuration with reduced neoclassical transport in comparison to a classical stellarator, and turbulent transport is expected to be a significant source of anomalous heat transport across the plasma minor radius. The ion temperature gradient driven mode and the trapped electron mode (TEM) are thought to be responsible for the ion-scale turbulence in W7-X plasmas with volume averaged pressure below 1%. In this work, the electron temperature gradient driven turbulence is shown to be a good candidate for the explanation of the observed electron heat flux, in the inner plasma region where the density gradient is weak (in the outer region, a relatively stronger density gradient would drive additional TEM turbulence). The experimental electron heat transport measured during electron cyclotron resonant heating power and plasma density scans is compared to neoclassical predictions, and the stiffness in the electron heat transport measured during transient transport experiments is presented in three common magnetic configurations of W7-X. In low-⟨β⟩ plasma discharges, the stiffness in the electron heat flux, quantified by the ratio of the heat pulse to power balance diffusivity, χHP/χPB, is measured to be less than 2, and trend downwards with increasing collisionality.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publication Artículo científico (JournalArticle)

Turbulent impurity transport simulations in Wendelstein 7-X plasmas

  • García-Regaña, J.M.
  • Barnes, M.
  • Calvo, I.
  • Parra, F.I.
  • Alcusón, J.A.
  • Davies, R.
  • González-Jerez, A.
  • Mollén, A.
  • Sánchez, E.
  • Velasco, J.L.
  • Zocco, A.
A study of turbulent impurity transport by means of quasilinear and nonlinear gyrokinetic simulations is presented for Wendelstein 7-X (W7-X). The calculations have been carried out with the recently developed gyrokinetic code stella. Different impurity species are considered in the presence of various types of background instabilities: ion temperature gradient (ITG), trapped electron mode (TEM) and electron temperature gradient (ETG) modes for the quasilinear part of the work; ITG and TEM for the nonlinear results. While the quasilinear approach allows one to draw qualitative conclusions about the sign or relative importance of the various contributions to the flux, the nonlinear simulations quantitatively determine the size of the turbulent flux and check the extent to which the quasilinear conclusions hold. Although the bulk of the nonlinear simulations are performed at trace impurity concentration, nonlinear simulations are also carried out at realistic effective charge values, in order to know to what degree the conclusions based on the simulations performed for trace impurities can be extrapolated to realistic impurity concentrations. The presented results conclude that the turbulent radial impurity transport in W7-X is mainly dominated by ordinary diffusion, which is close to that measured during the recent W7-X experimental campaigns. It is also confirmed that thermodiffusion adds a weak inward flux contribution and that, in the absence of impurity temperature and density gradients, ITG- and TEM-driven turbulence push the impurities inwards and outwards, respectively.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publication Artículo científico (JournalArticle)

Impact of the temperature ratio on turbulent impurity transport in Wendelstein 7-X

  • Wegner, Th.
  • Alcusón, J.A.
  • Geiger, B.
  • v. Stechow, A.
  • Xanthopoulos, P.
  • Angioni, C.
  • Beurskens, M.N.A.
  • Böttger, L.-G.
  • Bozhenkov, S.A.
  • Brunner, K.J.
  • Burhenn, R.
  • Buttenschön, B.
  • Damm, H.
  • Edlund, E.
  • Ford, O.P.
  • Fuchert, G.
  • Grulke, O.
  • Huang, Z.
  • Knauer, J.
  • Kunkel, F.
  • Langenberg, A.
  • Pablant, N.A.
  • Pasch, E.
  • Rahbarnia, K.
  • Schilling, J.
  • Thomsen, H.
  • Vanó, L.
  • The W7-X team
First experimental observations in the Wendelstein 7-X stellarator indicate that the impurity confinement can be explained by turbulent processes. In particular, plasma discharges with increased ion to electron temperature ratio are accompanied by reduced electron density fluctuation amplitudes and anomalous impurity diffusion, suggesting a lower turbulent transport. Employing gyro-kinetic numerical simulations, we argue that the temperature ratio plays a key role for reducing the ion temperature gradient instability in Wendelstein 7-X, leading to an enhanced impurity confinement.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publication Artículo científico (JournalArticle)

Turbulence Mechanisms of Enhanced Performance Stellarator Plasmas

  • Xanthopoulos, P.
  • Bozhenkov, S.A.
  • Beurskens, M.N.
  • Smith, H.M.
  • Plunk, G.G.
  • Helnader, P.
  • Beidler, C.D.
  • Alcusón, J.A.
  • Alonso, A.
  • Dinklage, A.
  • Ford, O.
  • Fuchert, G.
  • Geiger, J.
  • Proll, J.H.E.
  • Pueschel, M.J.
  • Turkin, Y.
  • Warmer, F.
We theoretically assess two mechanisms thought to be responsible for the enhanced performance observed in plasma discharges of the Wendelstein 7-X stellarator experiment fueled by pellet injection. The effects of the ambipolar radial electric field and the electron density peaking on the turbulent ion heat transport are separately evaluated using large-scale gyrokinetic simulations. The essential role of the stellarator magnetic geometry is demonstrated, by comparison with a tokamak.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publication Artículo científico (JournalArticle)

High-performance plasmas after pellet injections in Wendelstein 7-X

  • Bozhenkov, S.A.
  • Kazakov, Y.
  • Ford, O.P.
  • Beurskens, M.N.A.
  • Alcusón, J.A.
  • Alonso, J.A.
  • Baldzuhn, J.
  • Brandt, C.
  • Brunner, K.J.
  • Damm, H.
  • Fuchert, G.
  • Geiger, J.
  • Grulke, O.
  • Hirsch, M.
  • Höfel, U.
  • Huang, Z.
  • Knauer, J.
  • Krychowiak, M.
  • Langenberg, A.
  • Laqua, H.P.
  • Lazerson, S.
  • Marushchenko, N.B.
  • Moseev, D.
  • Otte, M.
  • Pablant, N.
  • Pasch, E.
  • Pavone, A.
  • Proll, J.H.E.
  • Rahbarnia, K.
  • Scott, E.R.
  • Smith, H.M.
  • Stange, T.
  • von Stechow, A.
  • Thomsen, H.
  • Turkin, Yu.
  • Wurden, G.
  • Xanthopoulos, P.
  • Zhang, D.
  • Wolf, R.C.
  • The W7-Xteam
A significant improvement of plasma parameters in the optimized stellarator W7-X is found after injections of frozen hydrogen pellets. The ion temperature in the post-pellet phase exceeds 3 keV with 5 MW of electron heating and the global energy confinement time surpasses the empirical ISS04-scaling. The plasma parameters realized in such experiments are significantly above those in comparable gas-fuelled discharges. In this paper, we present details of these pellet experiments and discuss the main plasma properties during the enhanced confinement phases. Local power balance is applied to show that the heat transport in post-pellet phases is close to the neoclassical level for the ion channel and is about a factor of two above that level for the combined losses. In comparable gas-fuelled discharges, the heat transport is by about ten times larger than the neoclassical level, and thus is largely anomalous. It is further observed that the improvement in the transport is related to the peaked density profiles that lead to a stabilization of the ion-scale turbulence.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publication Artículo científico (JournalArticle)

Suppression of electrostatic micro-instabilities in maximum-J stellarators

  • Alcusón, J.A.
  • Xanthopoulos, P.
  • Plunk, G.G.
  • Helander, P.
  • Wilms, F.
  • Turkin, Y.
  • von Stechow, A.
  • Grulke, O.
We demonstrate favorable stability properties of maximum-J stellarators, exemplified by the Wendelstein 7-X (W7-X) device, in scenarios with low plasma beta. A large number of electrostatic linear gyrokinetic simulations are conducted to scan the relevant parameter space for different configurations, resulting in stability maps that account for the key micro-instabilities thought to drive turbulent transport. These maps exhibit a ‘stability valley’ in the region where the normalized ion temperature gradient is roughly equal to the normalized density gradient. In this valley, the electrostatic instabilities are partly suppressed thanks to the maximum-J property of the W7-X field. This property varies across different W7-X configurations, and this measurable difference is demonstrated to affect the size of the stability valley. Finally, the impact of the isotope effect and collisions on the valley is examined.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publication Artículo científico (JournalArticle)

Overview of first Wendelstein 7-X high-performance operation

  • Klinger, T.
  • Andreeva, T.
  • Bozhenkov, S.
  • Brandt, C.
  • Burhenn, R.
  • Buttenschön, B.
  • Fuchert, G.
  • Geiger, B.
  • Grulke, O.
  • Laqua, H.P.
  • Pablant, N.
  • Rahbarnia, K.
  • Stange, T.
  • von Stechow, A.
  • Tamura, N.
  • Thomsen, H.
  • Turkin, Y.
  • Wegner, T.
  • Abramovic, I.
  • Äkaslompolo, S.
  • Alcusón, J.A.
  • Aleynikov, P.
  • Aleynikova, K.
  • Ali, A.
  • Alonso, A.
  • Anda, G.
  • Ascasibar, E.
  • Bähner, J.P.
  • Baek, S.G.
  • Balden, M.
  • Baldzuhn, J.
  • Bandluch, M.
  • Barbui, T.
  • Behr, W.
  • Beidler, C.
  • Benndorf, A.
  • Biedermann, C.
The optimized superconducting stellarator device Wendelstein 7-X (with major radius R = 5.5 m, minor radius a = 0.5 m, and 30 m3 plasma volume) restarted operation after the assembly of a graphite heat shield and 10 inertially cooled island divertor modules. This paper reports on the results from the first high-performance plasma operation. Glow discharge conditioning and ECRH conditioning discharges in helium turned out to be important for density and edge radiation control. Plasma densities of 1–4.5 × 1019 m−3 with central electron temperatures 5–10 keV were routinely achieved with hydrogen gas fueling, frequently terminated by a radiative collapse. In a first stage, plasma densities up to 1.4 × 1020 m−3 were reached with hydrogen pellet injection and helium gas fueling. Here, the ions are indirectly heated, and at a central density of 8 · 1019 m−3 a temperature of 3.4 keV with Te/Ti = 1 was transiently accomplished, which corresponds to nTi(0)τE = 6.4 × 1019 keV s m−3 with a peak diamagnetic energy of 1.1 MJ and volume-averaged normalized plasma pressure ⟨β⟩ = 1.2%. The routine access to high plasma densities was opened with boronization of the first wall. After boronization, the oxygen impurity content was reduced by a factor of 10, the carbon impurity content by a factor of 5. The reduced (edge) plasma radiation level gives routinely access to higher densities without radiation collapse, e.g. well above 1 × 1020 m−2 line integrated density and Te = Ti = 2 keV central temperatures at moderate ECRH power. Both X2 and O2 mode ECRH schemes were successfully applied. Core turbulence was measured with a phase contrast imaging diagnostic and suppression of turbulence during pellet injection was observed.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Vacancy patterning and patterning vacancies: controlled self-assembly of fullerenes on metal surfaces

  • Kaiser, Alexander
  • Viñes Solana, Francesc
  • Illas i Riera, Francesc
  • Ritter, Marcel
  • Hagelberg, Frank
  • Probst, Michael
A density functional theory study accounting for van der Waals interactions reveals the potential of metal surface vacancies as anchor points for the construction of user-defined 2D patterns of adsorbate molecules via a controlled self-assembly process. Vice versa, energetic criteria indicate the formation of regular adsorbate-induced vacancies after adsorbate self-assembly on clean surfaces. These processes are exemplified by adsorbing C60 fullerene on Al(111), Au(111), and Be(0001) surfaces with and without single, triple, and septuple atom pits. An analysis of vacancy-adatom formation energetics precedes the study of the adsorption processes.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

A fast feedback controlled magnetic drive for the ASDEX Upgrade fast-ion loss detectors

  • Ayllón Guerola, Juan Manuel
  • González-Martín, Javier
  • Galdón Quiroga, Joaquín
  • Rivero-Rodriguez, J.F.
  • Galdón Quiroga, Joaquín
  • García López, J.
  • Rodríguez-Ramos, M.
  • Sanchís Sánchez, Lucía
  • Dominguez, A. D.
Trabajo presentado a la 21st Topical Conference on High Temperature Plasma Diagnostics, celebrada en Madison, Wisconsin (US) del 5 al 9 de junio de 2016. ASDEX Upgrade Team: et al., A magnetically driven fast-ion loss detector system for the ASDEX Upgrade tokamak has been designed and will be presented here. The device is feedback controlled to adapt the detector head position to the heat load and physics requirements. Dynamic simulations have been performed taking into account effects such as friction, coil self-induction, and eddy currents. A real time positioning control algorithm to maximize the detector operational window has been developed. This algorithm considers dynamical behavior and mechanical resistance as well as measured and predicted thermal loads. The mechanical design and real time predictive algorithm presented here may be used for other reciprocating systems., This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014-2018 under Grant Agreement No. 633053., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

First absolute measurements of fast-ion losses in the ASDEX Upgrade tokamak

  • Rodríguez-Ramos, M.
  • García-Muñoz, M.
  • Galdón Quiroga, Joaquín
  • García López, J.
  • Sanchís Sánchez, Lucía
  • Jiménez-Ramos, M. C.
  • Ayllón Guerola, Juan Manuel
  • Dominguez, A. D.
  • González-Martín, Javier
  • Rivero-Rodriguez, J.F.
Trabajo presentado a la 21st Topical Conference on High Temperature Plasma Diagnostics, celebrada en Madison, Wisconsin (US) del 5 al 9 de junio de 2016., ASDEX Upgrade Team: et al., First absolute measurements of fast-ion losses have been obtained in the ASDEX Upgrade tokamak by means of absolutely calibrated scintillator based fast ion loss detector and infrared measurements. An instrument function that includes scintillator efficiency, collimator geometry, optical transmission and camera efficiency has been constructed. Absolute flux of Neutral Beam Injection (NBI) prompt losses has been obtained in magnetohydrodynamic (MHD) quiescent plasmas. ASCOT simulations are in fairly good agreement with FILD and IR measurements of the fast ion load., This research was supported in part by the Spanish Ministry of Economy and Competitiveness (RYC2011-09152, FIS2015-69362-P and ENE2012-31087), the Marie Curie FP7 Integration Grant, PCIG11-GA-2012-321455, within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014–2018 under grant agreement number 633053 and the V Plan propio de la Universidad de Sevilla (VPPI-US)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Ion heat and toroidal momentum transport studies in the H-mode transport barrier of ASDEX Upgrade

  • Viezzer, Eleonora
Trabajo presentado a la 26th IAEA Fusion Energy Conference, celebrada en Kyoto (Japón) del 17 al 22 de octubre de 2016., ASDEX Upgrade Team and the EUROfusion MST1 Team: et al., The ion heat and toroidal momentum transport at the plasma edge of ASDEX Upgrade (AUG) H-mode plasmas are investigated by combining measurements with interpretive and predictive modelling. The experimentally determined ion heat diffusivities, xi, are compared to neoclassical theory and the impact of edge localized modes (ELMs) on the edge ion heat transport level is studied in detail. In all analyzed cases the pre-ELM xi in the pedestal is close to the neoclassical prediction within the experimental uncertainties. During the ELM crash, the ion heat transport is increased by an order of magnitude due to the outward heat pulse propagation caused by the ELM. The perturbed heat flux is first increased at the separatrix and is then observed to penetrate inwards, i.e. first the separatrix ion temperature increases at the ELM onset, leading to a flatter ion temperature gradient, followed by a decrease of the whole edge profile up to the pedestal top. The ion heat transport is restored to its pre-ELM neoclassical level 3–4ms after the ELM crash. The edge impurity toroidal rotation shows a dependence on collisionality, with negative (counter-current) values at low collisionality, and positive (co-current) values at high collisionality. Modelling of the edge toroidal rotation based on the toroidal torque balance equation including diffusion, pinch and external momentum sources indicates that diffusion and the external sources are the dominant players at both low and high collisionality. The sign change of the impurity toroidal rotation observed at low collisionality can be explained by a negative edge torque combined with a large differential toroidal rotation, while the main ion toroidal rotation is almost unaffected., This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the European Union′s Horizon 2020 research and innovation programme under grant agreement number 633053. The support from the EUROfusion Researcher Fellowship programme under grant number WP14-FRF-IPP/Viezzer and from the Spanish Ministry of Economy and Competitiveness (FJCI-201422139) is gratefully acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

A new beam emission polarimetry diagnostic for measuring the magnetic field line angle at the plasma edge of ASDEX Upgrade

  • Viezzer, Eleonora
Trabajo presentado a la 21st Topical Conference on High Temperature Plasma Diagnostics, celebrada en Madison, Wisconsin (US) del 5 al 9 de junio de 2016., ASDEX Upgrade Team: et al., A new edge beam emission polarimetry diagnostic dedicated to the measurement of the magnetic field line angle has been installed on the ASDEX Upgrade tokamak. The new diagnostic relies on the Motional Stark Effect and is based on the simultaneous measurement of the polarization direction of the linearly polarized π (parallel to the electric field) and σ (perpendicular to the electric field) lines of the Balmer line Dα. The technical properties of the system are described. The calibration procedures are discussed and first measurements are presented., This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014–2018 under grant agreement number 633053. The support from the EUROfusion Researcher Fellowship programme under grant number WP14-FRF-IPP/Viezzer and from the Spanish Ministry of Economy and Competitiveness (FJCI-201422139) is gratefully acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Absolute flux of fast-ion losses in the ASDEX Upgrade tokamak, Calibración absoluta de detectores de pérdidas de iones rápidos en dispositivos de fusión nuclear

  • García López, J.
  • García-Muñoz, M.
  • Jiménez-Ramos, M. C.
  • Sanchís Sánchez, Lucía
  • Galdón Quiroga, Joaquín
Trabajo presentado al VIII CPAN Days: Encuentros en Física Nuclear, celebrado en Zaragoza del 28 al 30 de noviembre de 2016., Fast-ions play critical roles in heating, current drive, momentum input and plasma stability, This work has been carried out within the framework of the Eurofusion Consortium nad has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement number 633053. Work is partially supported by the Project.: FIS2015-69362-P., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Investigation of inter-ELM ion heat transport in the H-mode pedestal of ASDEX Upgrade plasmas

  • Viezzer, Eleonora
Trabajo presentado al 15th International Workshop on H-mode Physics and Transport Barriers, celebrado en Garching (Alemania) del 19 al 21 de octubre de 2015.-- ASDEX Upgrade Team and the EUROfusion MST1 Team: et al., The ion heat transport in the pedestal of H-mode plasmas is investigated in various H-mode discharges with different pedestal ion collisionalities. Interpretive modelling suggests that in all analyzed discharges the ion heat diffusivity coefficient, Xi, in the pedestal is close to the neoclassical prediction within the experimental uncertainties. The impact of changing the deposition location of the electron cyclotron resonance heating on the ion heat transport has been studied. The effect on the background profiles is small. The pre-ELM (edge localized modes) edge profiles as well as the behaviour of the electron temperature and density, ion temperature and impurity toroidal rotation during the ELM cycle are very similar in discharges with on- and off-axis ECRH heating. No significant deviation of Xi from neoclassics is observed when changing the ECRH deposition location to the plasma edge., This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014–2018 under grant agreement number 633053. The support from the EUROfusion Researcher Fellowship programme under grant number WP14-FRFIPP/Viezzer is gratefully acknowledged. F. M. Laggner is a fellow of the Friedrich Schiedel Foundation for Energy Technology., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Proposal of a Novel Design for Linear Superconducting Motor Using 2G Tape Stacks

  • Gonçalves Sotelo, Ghilherme
  • Sass, Felipe
  • Carrera, Miquel
  • López López, Josep
  • Granados, Xavier
This manuscript presents a new design for superconducting linear motor (SLM). This SLM uses stacks of second generation (2G) superconducting tapes, which are responsible for replacing YBCO bulks. The proposed SLM may operate as a synchronous motor or as a hysteresis motor, depending on the load force magnitude. A small scale linear machine prototype with 2G stacks was constructed and tested to investigate the proposed SLM topology. The stator traveling magnetic field wave was represented by several Nd-Fe-B permanent magnets. A relative movement was produced between the stator and the stack, and the force was measured along the displacement. This system was also simulated by finite element method, in order to calculate the induced currents in the stack and determine the electromagnetic force. The H-formulation was used to solve the problem and a power law relation was applied to take into account the intrinsically nonlinearity of the superconductor. The simulated and measured results were in accordance. Simulated results were extrapolated, proving to be an interesting tool to scale up the motor in future projects. The proposed motor presented an estimated force density of almost 500 N/kg, which is much higher than any linear motor., The authors would like to thank the Brazilian Agency CNPq for the grant “Science without Borders” and the financial supported given by the: European Union agencies for the FORTISSIMO project FP7-2013-ICT-609029, EUROTAPES project FP7-NMP-Large-2011-280432, Eurofusion project PPPT-WPMAG 2014, and EU COST ACTIONS MP1201 and MP1014; Spanish Government agencies for Severo Ochoa Programme Centres of Excellence in R&D (SEV-2015-0496), CONSOLIDER Excellence Network (MAT2015-68994-REDC) and project MAT2014-56063-C2-1-R; Catalan Government for 2014-SGR-753., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Singular spectrum analysis filtering and Fourier inversion: an efficient and fast way to improve resolution and quality of current density maps with low-cost Hall scanning systems

  • Amorós, Jaume
  • Duran, Arnau
  • Carrera, Miquel
  • López, Josep
  • Granados, Xavier
We provide a Biot–Savart inversion scheme that, for any two-dimensional, or bulk with planar crystallization, high-temperature superconducting (HTS) sample, determines current density maps with a higher resolution and accuracy than previous procedures and at a fraction of its computational cost. The starting point of our scheme is a Hall scanning microscopy map of the out-of-plane component of the magnetic field generated by the current. Such maps are noisy in scans of real samples with commercial-grade equipment, and their error is the limiting factor in any Biot–Savart inversion scheme. The main innovation of our proposed scheme is a singular spectrum analysis (SSA) filtering of the Hall probe maps, which cancels measurement errors such as noise or drifts without introducing any artifacts in the field map. The SSA filtering of the Hall probe data is so successful in this task that the resulting magnetic field map does not require an overdetermined QR inversion, allowing Fourier inversion of the Biot–Savart problem. Our implementation of SSA filtering of the Hall scan measurements, followed by Biot–Savart inversion using the fast Fourier transform (FFT), is applied to both simulations and real samples of HTS tape stacks. The algorithm works in cases where ill conditioning ruled out the application of Fourier inversion, and achieves a finer resolution for a fraction of the cost of the QR inversion used to date. The computation passes physical and statistical validity tests in all cases, and in three-dimensional samples it is shown to yield the average, with a depth-dependent weight, of the current density circulating in the different layers of the sample., We acknowledge the financial support from the Spanish Ministry of Economy and Competitiveness through the Severo Ochoa Programme (SEV-2015-0496), CONSOLIDER Excellence Network (MAT2015-68994-REDC), COACHSUPENERGY project (MAT2014-51778-C2-1-R, co-financed by FEDER), GAP project (MTM2015-69135-P) and SUPERINKS project (RTC-2015-3640-3, co-financed by FEDER); the European Union for the FASTGRID project (H2020-NMBP-18-2016-IA-72109) and WPMAG 5 (H2020-EUROfusion); and the Catalan Government with 2017-SGR-932, 2014-SGR-753 and Xarmae., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A rotary and reciprocating scintillator based fast-ion loss detector for the MAST-U tokamak

  • Rivero-Rodríguez, Francisco
  • García-Muñoz, M.
  • Martín, R.
  • Galdón Quiroga, Joaquín
  • Ayllón Guerola, Juan Manuel
  • Akers, R. J.
  • Buchanan, J.
  • Croft, D.
  • García-Vallejo, D.
  • González-Martín, Javier
  • Harvey, D.
  • McClements, K. G.
  • Rodríguez-Ramos, M.
  • Sanchís Sánchez, Lucía
The design and unique feature of the first fast-ion loss detector (FILD) for the Mega Amp Spherical Tokamak - Upgrade (MAST-U) is presented here. The MAST-U FILD head is mounted on an axially and angularly actuated mechanism that makes it possible to independently adapt the orientation [0°, 90°] and radial position [1.40 m, 1.60 m] of the FILD head, i.e., its collimator, thus maximizing the detector velocity-space coverage in a broad range of plasma scenarios with different q95. The 3D geometry of the detector has been optimized to detect fast-ion losses from the neutral beam injectors. Orbit simulations are used to calculate the strike map and predict the expected signals. The results show a velocity-space range of [4 cm, 13 cm] in gyroradius and [30°, 85°] in pitch angle, covering the entire neutral beam ion energy range. The optical system will provide direct sight of the scintillator and simultaneous detection with two cameras, giving high spatial and temporal resolution. The MAST-U FILD will shed light on the dominant fast-ion transport mechanisms in one of the world’s two largest spherical tokamaks through absolute measurements of fast-ion losses, This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014-2018 under Grant Agreement No. 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission. This research received funding from the V Plan Propio de Investigacion de la Universidad de Sevilla (PP2016-7145)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Beam-Ion Acceleration during Edge Localized Modes in the ASDEX Upgrade Tokamak

  • Galdón Quiroga, Joaquín
  • García-Muñoz, M.
  • McClements, K. G.
  • Nocente, M.
  • Hoelzel, M.
  • Jacobsen, A. S.
  • Orain, F.
  • Rivero-Rodriguez, J.F.
  • Salewski, M.
  • Sanchís Sánchez, Lucía
  • Suttrop, W.
  • Viezzer, Eleonora
The acceleration of beam ions during edge localized modes (ELMs) in a tokamak is observed for the first time through direct measurements of fast-ion losses in low collisionality plasmas. The accelerated beam-ion population exhibits well-localized velocity-space structures which are revealed by means of tomographic inversion of the measurement, showing energy gains of the order of tens of keV. This suggests that the ion acceleration results from a resonant interaction between the beam ions and parallel electric fields arising during the ELM. Orbit simulations are carried out to identify the mode-particle resonances responsible for the energy gain in the particle phase space. The observation motivates the incorporation of a kinetic description of fast particles in ELM models and may contribute to a better understanding of the mechanisms responsible for particle acceleration, ubiquitous in astrophysical and space plasmas., This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training program under Grant Agreement No. 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission. The support from the H2020 MarieSklodowska Curie programme (Grant No. 708257) and the Spanish Ministry of Economy and Competitiveness (Grants No. RYC-2011-09152, No. FIS2015-69362-P, No. FJCI-201422139) is gratefully acknowledged, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

First measurements of a scintillator based fast-ion loss detector near the ASDEX Upgrade divertor

  • González-Martín, Javier
  • Ayllón Guerola, Juan Manuel
  • García-Muñoz, M.
  • Herrmann, A.
  • Leitenstern, P.
  • De Marne, P.
  • Zoletnik, S.
  • Kovacsik, A.
  • Galdón Quiroga, Joaquín
  • Rivero-Rodriguez, J.F.
  • Rodríguez-Ramos, M.
  • Sanchís Sánchez, Lucía
  • Dominguez-Palacios, J.
  • ASDEX Upgrade Team
  • MST1 Team
A new reciprocating scintillator based fast-ion loss detector has been installed a few centimeters above the outer divertor of the ASDEX Upgrade tokamak and between two of its lower Edge Localized Modes (ELM) mitigation coils. The detector head containing the scintillator screen, Faraday cup, calibration lamp, and collimator systems are installed on a motorized reciprocating system that can adjust its position via remote control in between plasma discharges. Orbit simulations are used to optimize the detector geometry and velocity-space coverage. The scintillator image is transferred to the light acquisition systems outside of the vacuum via a lens relay (embedded in a 3D-printed titanium holder) and an in-vacuum image guide. A charge coupled device camera, for high velocity-space resolution, and an 8 × 8 channel avalanche photo diode camera, for high temporal resolution (up to 2 MHz), are used as light acquisition systems. Initial results showing velocity-space of neutral beam injection prompt losses and fast-ion losses induced by a (2, 1) neoclassical tearing mode are presented, This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014-2018 under Grant Agreement No. 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Microstructural comparison of Oxide Dispersion Strengthened Fe-14Cr steels produced by HIP and SPS

  • Pazos, David
  • Suárez, Marta
  • Fernández, Adolfo
  • Fernández, Pilar
  • Iturriza, Iñigo
  • Ordás, Nerea
Once the feasibility of the STARS route (Surface Treatment of gas Atomized powder followed by Reactive Synthesis) has been demonstrated to produce ODS ferritic steels by internal oxidation avoiding mechanical alloying, two strategies are proposed in this work to enhance precipitation of oxide nanoparticles. Firstly, consolidation by Spark Plasma Sintering (SPS) is used to produce finer microstructures compared to HIP consolidation. SPS parameters like temperature, heating rate, pressure and time of exposure under pressure were explored, and dense samples (up to 99,5%RD) were obtained. Secondly, precipitation of nanoparticles is achieved through a combination of HIP consolidation at low temperature (700–900 °C) followed by hot deformation under the presence of metastable oxides, to increase the density of dislocations, preferential nucleation sites for the precipitation of nanometric Y-Ti-O oxides. Deformation dilatometry and plane strain compression tests were performed to simulate hot deformation under different hot rolling schedules. Total deformation, number of passes, time between passes or initial and final rolling temperatures are some of the parameters explored. Microstructural characterization by Scanning Electron Microscopy (SEM) of consolidated materials is presented., Part of this work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014-2018 under grant agreement No. 633053., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The remote handling system of IFMIF-DONES

  • Miccichè, Gioacchino
  • Ascott, Mark
  • Bakic, Ante
  • Bernardi, Davide
  • Breñosa, José
  • Coloma, Sofía
  • Crofts, Oliver
  • Gironimo, Giuseppe Di
  • Ferre, Manuel
  • Fischer, Georg
  • Ibarra, Á ngel
  • Karap, Attila
  • Kiss, Istvan Gabor
  • Kunert, Christoph
  • Lorenzelli, Luciano
  • Mitchell, George
  • Mittwollen, Martin
  • Pagani, Paolo
  • Papa, Stefano
  • Porempovics, Gabor
  • Tadic, Tonci
  • Matyas, Toth
The International Fusion Materials Irradiation Facility-DEMO Oriented Neutron Source (IFMIF-DONES) consists of complex systems and massive components that need to be on site assembled and maintained. For several of them it is required to perform maintenance, inspection and monitoring tasks over many years in a hostile environment and in efficient, safe and reliable manner. The maintenance of IFMIF-DONES’ systems and components, located mainly in the Test Systems (TS), in the Lithium Systems (LS) and in the Accelerator Systems (AS), is classified as a Remote Handling (RH) Class 1st activity and as such is considered a crucial and essential activity whose success will strictly depend on the IFMIF-DONES RH capability. According to this, a Remote Handling System (RHS) for IFMIF-DONES, which comprises the whole set of Remote Handling Equipment and tooling for the execution of maintenance tasks, has been designed. A wide range of technologies is involved: special cranes, manipulator arms, lift interface frames, special cameras, control systems and virtual reality. In this paper an overview on status of the design of the main robotic systems and tooling of the RHS of IFMIF-DONES, including design requirements, functions and maintenance tasks to be performed, is given., This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014–2018 under grant agreement No 633053., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Methodology for Remote Handling Operations in IFMIF-DONES

  • Coloma, Sofía
  • Ferre, Manuel
  • Cogollor, J.M.
  • Miccichè, Gioacchino
The International Fusion Material Irradiation Facility-DEMO Oriented NEutron Source (IFMIF-DONES) is composed of numerous complex systems and components that need on-site maintenance. Such need requires Remote Handling (RH) operations with advanced technology that is capable of preventing exposure to radiation and complying with stringent plant requirements in hostile environments. Moreover, specific design and integration of the RH systems have to be carried out in order to properly comply with constraints and procedures for remote operations, which in most cases become an engineering challenge. This paper presents a RH methodology that covers all the necessary aspects for the entire rigorous implementation and execution of remote operation in IFMIF-DONES. The methodology is made up of a set of different stages, which are based on the initial cooperation among different teams involved in the remote operation cycle. This approach leads to an iterative process that allows optimization and improvement of remote operations. It aims at accelerating the process with safer and robust concept of maintenance, simplified procedures, minimized breakdowns and reduced cost and time., This work has been partially supported by “Technofusión(II) CM (P2013/MAE-2745). Moreover, this work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014–2018 under grant agreement No. 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Preliminary design of the HEBT of IFMIF DONES

  • Nomen, Oriol
  • Sánchez-Herranz, Daniel
  • Oliver, Concepción
  • Podadera, Iván
  • Varela, Rodrigo
  • Ogando, Francisco
  • Hauer, Volker
  • Arranz, Fernando
  • Coloma, Sofía
  • Heidinger, Roland
  • Dzitko, Hervé
IFMIF-DONES (International Fusion Materials Irradiation Facility–DEMO Oriented Neutron Source) is currentlybeing developed in the frame of the EUROfusion Early Neutron Source work package (WPENS) and will be aninstallation for fusion material testing, that will generate aflux of neutrons of 1018m−2s−1with a broad peak at14 MeV by Li(d,xn) nuclear reactions thanks to a 40 MeV deuteron beam colliding on a liquid Liflow.The accelerator system is in charge of providing such high energy deuterons in order to produce the expectedneutronflux. The High Energy Beam Transport line (HEBT) is the last subsystem of the accelerator and its mainfunctions are to guide the deuteron beam towards the Lithium target and to shape it by the use of magneticelements to the reference beam footprint at the Lithium Target.The present work summarizes the current status of the HEBT design, including beam dynamics, vacuum,radioprotection, diagnostics and remote handling studies performed, along with the layout and integration of theline., This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014–2018 and 2019–2020 under grant agreement No 633053. The work done by IREC has been supported by the CERCA Programme from Generalitat de Catalunya (Government of Catalonia)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Design and configurations for the Shielding of the Beam Dump of IFMIF DONES

  • Sánchez-Herranz, Daniel
  • Ortego, Pedro
  • Nomen, Oriol
  • Brañas, Beatriz
  • Ogando, Francisco
  • Sauvan, Patrick
  • Arranz, Fernando
  • Coloma, Sofía
IFMIF-DONES (International Fusion Materials Irradiation Facility–DEMO Oriented Neutron Source) is currentlybeing developed in the frame of the EUROfusion Early Neutron Source work package (WPENS). It will be aninstallation for fusion material testing, that will generate aflux of neutrons of 1018m−2s−1with a broad peak at14 MeV by Li(d,xn) nuclear reactions thanks to a deuteron beam colliding on a liquid Liflow.The accelerator system is in charge of providing such high energy deuterons in order to produce the neutronflux expected. The objective of the Beam Dump, part of the High Energy Beam Transport Line (HEBT), is to stopthe pulsed beam at low duty cycle during DONES accelerator commissioning and start-up phases.The present work explains the radiological design of the beam dump shielding and two different configurationapproaches for the materialization of the design. The radiological design considers maintenance and operation,and it was done together with the building walls dimensioning so that the combined radiation attenuation by thelocal shield and the building leads to dose rates in the different rooms that satisfy the requirements. Activation ofthe materials in the HEBT line, originated by the leakage of neutrons through the beam dump entrance isevaluated and an ad-hoc solution is proposed for its minimization. Regarding the mechanical design, in thefirstconfiguration, the shielding is split into two halves horizontally, the upper-half requiring external lifting cap-abilities for its commission and maintenance. The second approach consists in a vertical splitting into two halves,which are self-moveable, avoiding the needs of external lifting capabilities for the remote handling of theshielding., This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014-2018 and 2019-2020 undergrant agreement No 633053. The views and opinions expressed hereindo not necessarily reflect those of the European Commission.The radiological design of the shield has been supported by the Spanish Government in the frame of the Broader Approach Agreement.The work done by IREC has been supported by the CERCA Programme from Generalitat de Catalunya (Government of Catalonia)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Elucidation of the decomposition reactions of low-fluorine YBa2Cu3O7-x precursors during film pyrolysis

  • Piperno, Laura
  • Rasi, Silvia
  • Santis, S. De
  • Santoni, A.
  • Mancini, A.
  • Angrisani Armenio, A.
  • Pinto, V.
  • Farjas, Jordi
  • Sotgiu, Giovanni
  • Celentano, Giuseppe
Chemical solution deposition methods such as low-fluorine metal organic decomposition, are nowadays widely employed in the production of YBa2Cu3O7-x superconducting films. The investigation of the chemical reactions that convert the organic precursors into the pyrolysis product is essential for the optimization of the pyrolysis step, and, ultimately, for the comprehension of the growth process. In this work, a detailed analysis of the single-salt precursors, of the ternary precursor solution and its thermal decomposition was carried out through infrared spectroscopy (FITR), thermogravimetric analysis (TGA), evolved gas analysis (EGA), X-Ray diffraction (XRD), coupled with quench experiments, and X-Ray photoelectron spectroscopy (XPS). The combination of these techniques led to the identification of the precursors and the proposal of a reaction path for pyrolysis. More in detail, a copper/ammonia coordination compound was identified and it is the first to decompose at low temperatures via a mixed path of hydrolysis and oxidation to produce copper oxide. The decomposition of the other two precursors is superimposed at higher temperatures and it yields a mixture of BaF2, YF3 and Ba1-xYxF2+x., This work has been carried out within the framework of theEUROfusion Consortium and has received funding from the EURATOM programme 2014–2018 and 2019-2020 under grant agreement N° 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission. This work was also supported by Ministerio de Ciencia, Innovación y Universidades (grant number RTI2018-095853-B-C22), by the Center of Excellence Severo Ochoa (SEV-2015-0496), the Generalitat de Catalunya (2017-SGR-1519) and the Universitat de Girona (UdG, contract number MPCUdG2016/059)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Intrinsic Anisotropy and Pinning Anisotropy in Nanostructured YBa2Cu3O7􀀀 from Microwave Measurements

  • Pompeo, N.
  • Alimenti, A.
  • Torokhtii, K.
  • Bartolomé, Elena
  • Palau, Anna
  • Puig Molina, Teresa
  • Augieri, A.
  • Galluzzi, V.
  • Mancini, A.
  • Celentano, Giuseppe
  • Obradors, Xavier
  • Silva, E.
Anisotropy is an intrinsic factor that dictates the magnetic properties of YBa2Cu3O7−δ and therefore has a great impact on many applications. Artificial pinning centres are often introduced in an attempt to mitigate its effect, resulting in less anisotropic electrical and magnetic properties. However, the nanoengineering of superconductors makes the quantification of the anisotropy itself uncertain: the intrinsic anisotropy due to the layered structure, quantified by the anisotropy factor γ, mixes with the additional anisotropy due to pinning. As a consequence, there is no consensus on the experimental anisotropy factor γ that can result in YBa2Cu3O7−δ when directional (twin planes, nanorods) or isotropic defects are present. We present measurements of the magnetic field and angular dependent surface impedance in very different nanostructured YBa2Cu3O7−δ films, grown by a chemical route and by pulsed laser deposition with different kind of defects (nanorods, twin planes, nanoparticles). We show that the surface impedance measurements are able to disentangle the intrinsic anisotropy from the directional pinning anisotropy, thanks to the possibility of extracting the true anisotropic flux–flow resistivity and by correctly exploiting the angular scaling. We find in all films that the intrinsic anisotropy γ = 5.3 ± 0.7. By contrast, the pinning anisotropy determines a much more complex, feature– rich and nonuniversal, sample–dependent angular landscape., This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom Research and Training Programme 2014-2018 and 2019-2020 under grant agreement No 633 053. The views and opinions expressed herein do not necessarily reflect those of the European Commission. We thank Benedetta Belli and Raffaella Rogai for help in data acquisition. We acknowledge financial support from Spanish Ministry of Economy and Competitiveness through the Severo Ochoa Programme for Centres of Excellence in R&D (SEV-2015-0496), SUMATE project RTI2018-095853-B-C21, co-financed by the European Regional Development Fund, COST-Nanohybri CA16218, DWARFS project (MAT2017-83468-R) and Catalan Government with 2017-SGR-1519 and XRE4S.This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom Research and Training Programme 2014-2018 and 2019-2020 under grant agreement No 633 053. The views and opinions expressed herein do not necessarily reflect those of the European Commission. We thank Benedetta Belli and Raffaella Rogai for help in data acquisition. We acknowledge financial support from Spanish Ministry of Economy and Competitiveness through the Severo Ochoa Programme for Centres of Excellence in R&D (SEV-2015-0496), SUMATE project RTI2018-095853-B-C21, co-financed by the European Regional Development Fund, COST-Nanohybri CA16218, DWARFS project (MAT2017-83468-R) and Catalan Government with 2017-SGR-1519 and XRE4S., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Advance in the conceptual design of the European DEMO magnet system

  • Sedlak, K:
  • Granados, Xavier
  • Corato, V.
Sedlak, K. et al., The European DEMO, i.e. the demonstration fusion power plant designed in the framework of the Roadmap to Fusion Electricity by the EUROfusion Consortium, is approaching the end of the pre-conceptual design phase, to be accomplished with a Gate Review in 2020, in which all DEMO subsystems will be reviewed by panels of independent experts. The latest 2018 DEMO baseline has major and minor radius of 9.1 m and 2.9 m, plasma current 17.9 MA, toroidal field on the plasma axis 5.2 T, and the peak field in the toroidal-field (TF) conductor 12.0 T. The 900 ton heavy TF coil is prepared in four low-temperature-superconductor (LTS) variants, some of them differing slightly, other significantly, from the ITER TF coil design. Two variants of the CS coils are investigated—a purely LTS one resembling the ITER CS, and a hybrid coil, in which the innermost layers made of HTS allow the designers either to increase the magnetic flux, and thus the duration of the fusion pulse, or to reduce the outer radius of the CS coil. An issue presently investigated by mechanical analyzes is the fatigue load. Two variants of the poloidal field coils are being investigated. The magnet and conductor design studies are accompanied by the experimental tests on both LTS and HTS prototype samples, covering a broad range of DC and AC tests. Testing of quench behavior of the 15 kA HTS cables, with size and layout relevant for the fusion magnets and cooled by forced flow helium, is in preparation., This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014–2018 and 2019–2020 under grant agreement No 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission. This work was supported in part by the Swiss National Science Foundation (SNF) under contract number 200021_179134., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Low-Fluorine Ba-Deficient Solutions for High-Performance Superconducting YBCO Films

  • Ternero, Pau
  • Alcalà, Jordi
  • Piperno, Laura
  • Pop, Cornelia
  • Ricart, Susagna
  • Mestres, Narcís
  • Obradors, Xavier
  • Puig Molina, Teresa
  • Sotgiu, Giovanni
  • Celentano, Giuseppe
  • Palau, Anna
High-performing superconducting YBa2Cu3O7–x (YBCO) films are fabricated by a chemical solution deposition methodology through novel barium-deficient low-fluorine solutions. The precursor solutions, distinguished for being straightforward, inexpensive and eco-friendly, allow us to reduce the growing temperature of YBCO down to 750 °C. We investigated the influence of the growing temperatures on both the microstructure and superconducting properties of YBCO films by using conventional thermal annealing and flash-heating approaches. A clear correlation between the growing temperature (Tg) and the superconducting performance of the films was obtained with improved performances observed at low Tg., This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom Research and Training Programme 2014–2018 and 2019–2020 under grant agreement No 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission. We acknowledge financial support from Spanish Ministry of Economy and Competitiveness through the Severo Ochoa Programme for Centres of Excellence in R&D (SEV-2015-0496, FUNFUTURE CEX2019-000917-S), SUMATE project RTI2018-095853-B-C21, cofinanced by the European Regional Development Fund, COST-Nanocohybri CA16218 and Catalan Government with 2017-SGR-1519 and XRE4S., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of irradiation on the stability of the corrosion layer produced in EUROFER by contact with lithium ceramics

  • Hernández, T.
  • Sánchez, F.J.
  • Moroño, A.
  • Aristu, M.
  • Marco, J.F.
6 pags., 7 figs., 2 tabs., This paper is concerned with the identification of the corrosive phase formed on the surface of low-activation steel Eurofer by contact with a ceramic bleeder and the effect of irradiation on the stability of the phase. Tests were carried out at 550°C for 164 hours in a mixture of He/HO (99.8/0.2 %vol) for simulating the purge gas. The results show an important interaction of the steel with the lithium ceramic breeder. The corrosion layer was characterized by scanning electron microscopy, x-ray diffraction, secondary ion mass spectroscopy and Mössbauer spectroscopy to verify the oxides formed during the corrosion test and the modification of the containing species after being subjected to different doses of ionizing radiation and / or deuterium absorption. The relationship of the different iron states and high energy traps for hydrogen isotopes (deuterium) that could be generated in a corrosion layer during reactor operation was also established. The results indicates that ionizing radiation up to the studied doses (200 MGy) does not produce additional defects to those generated by the transformation of hematite into non-stoichiometric wüstite, which is the fundamental compound of the corrosion layer by environmental deuterium., his work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014-2018 and 2019-2020 under grant agreement No 633053. The authors acknowledge the funding by Spanish MICINN (project PID2019-105325RB-C31) and TechnoFusion Project (P2018/EMT-4437) of the CAM (Comunidad Autónoma de Madrid). Financial support from the Spanish Agencia Estatal de Investigación through project RTI2018-095303-B-C51 is also gratefully acknowl- edged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Hardware developments and commissioning of the imaging heavy ion beam probe at ASDEX upgrade

  • Birkenmeier, Gregor
  • Galdón Quiroga, Joaquín
  • Olevskaia, V.
  • Oyola, Pedro
  • Toledo Garrido, Juan José
  • Bald, K.
  • Sochor, M.
  • Anda, Gábor
  • Zoletnik, S.
  • Herrmann, A.
  • Rodhe, V.
  • Teschke, Mathias
  • Giannone, L.
  • Lunt, T.
  • Viezzer, Eleonora
  • García-Muñoz, M.
  • ASDEX Upgrade Team
The imaging heavy ion beam probe (i-HIBP) is a new diagnostic concept realized at the tokamak ASDEX Upgrade (AUG) in order to obtain two-dimensional information about the density, the magnetic field and the electrostatic potential at the plasma edge. Although the two main components of the i-HIBP, an alkali beam based injector and a scintillator based detector, involve well-developed technologies, further developments were necessary to realize the i-HIBP at AUG. In dedicated laboratory tests, a new type of cesium source was characterized and the neutralization efficiency and properties of the primary cesium beam were found to be similar to alkali beams made of lighter elements. The use of cesium had also impact on the choice of the scintillator material, which was experimentally investigated in terms of photon yield, energy dependence and degradation revealing significant differences under irradiation with cesium ions compared to irradiation with hydrogenic beams. Due to constrictions of the AUG experiment setup, the high voltage components, the in-vessel shutter technology and the maintenance capabilities of the i-HIBP required new developments for the commissioning of the diagnostic., This work received funding from the Helmholtz Association under grant no. VH-NG-1350. This work received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement No. 805162). This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014–2018 and 2019–2020 under grant agreement No 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Implementation of synthetic fast-ion loss detector and imaging heavy ion beam probe diagnostics in the 3D hybrid kinetic-MHD code MEGA

  • Oyola, Pedro
  • González-Martín, Javier
  • García-Muñoz, M.
  • Galdón Quiroga, Joaquín
  • Birkenmeier, Gregor
  • Viezzer, Eleonora
  • Dominguez-Palacios, J.
  • Rueda-Rueda, José
  • Rivero-Rodríguez, Francisco
  • Todo, Y.
  • ASDEX Upgrade Team
A synthetic fast-ion loss (FIL) detector and an imaging Heavy Ion Beam Probe (i-HIBP) have been implemented in the 3D hybrid kinetic-magnetohydrodynamic code MEGA. First synthetic measurements from these two diagnostics have been obtained for neutral beam injection-driven Alfvén Eigenmode (AE) simulated with MEGA. The synthetic FILs show a strong correlation with the AE amplitude. This correlation is observed in the phase-space, represented in coordinates (P, E), being toroidal canonical momentum and energy, respectively. FILs and the energy exchange diagrams of the confined population are connected with lines of constant E, a linear combination of E and P. First i-HIBP synthetic signals also have been computed for the simulated AE, showing displacements in the strike line of the order of ∼1 mm, above the expected resolution in the i-HIBP scintillator of ∼100 μm., This work received funding from the European Starting Grant (ERC) from project 3D-FIREFLUC and from the Spanish Ministry of Science under Grant No. FPU19/02267. This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014-2018 and 2019-2020 under grant agreement No 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Mechanical and electromagnetic design of the vacuum vessel of the SMART tokamak

  • Mancini, Alessio
  • Ayllón Guerola, Juan Manuel
  • Doyle, Scott J.
  • Agredano-Torres, Manuel
  • López-Aires, D.
  • Toledo Garrido, Juan José
  • Viezzer, Eleonora
  • García-Muñoz, M.
  • Buxton, Peter F.
  • Chung, Kyoung-Jin
  • García-Domínguez, J.
  • García López, J.
  • Gryaznevich, Mikhail P.
  • Hidalgo-Salaverri, Javier
  • Hwang, Y. S.
  • Segado-Fernández, Jorge
The SMall Aspect Ratio Tokamak (SMART) is a new spherical device that is currently being designed at the University of Seville. SMART is a compact machine with a plasma major radius (R) greater than 0.4 m, plasma minor radius (a) greater than 0.2 m, an aspect ratio (A) over than 1.7 and an elongation (k) of more than 2. It will be equipped with 4 poloidal field coils, 4 divertor field coils, 12 toroidal field coils and a central solenoid. The heating system comprises of a Neutral Beam Injector (NBI) of 600 kW and an Electron Cyclotron Resonance Heating (ECRH) of 6 kW for pre-ionization. SMART has been designed for a plasma current (I) of 500 kA, a toroidal magnetic field (B) of 1 T and a pulse length of 500 ms preserving the compactness of the machine. The free boundary equilibrium solver code FIESTA [1] coupled to the linear time independent, rigid plasma model RZIP [2] has been used to calculate the target equilibria taking into account the physics goals, the required plasma parameters, vacuum vessel structures and power supply requirements. We present here the final design of the SMART vacuum vessel together with the Finite Element Model (FEM) analysis carried out to ensure that the tokamak vessel provides high quality vacuum and plasma performance withstanding the electromagnetic j×B loads caused by the interaction between the eddy currents induced in the vessel itself and the surrounding magnetic fields. A parametric model has been set up for the topological optimization of the vessel where the thickness of the wall has been locally adapted to the expected forces. An overview of the new machine is presented here., This work received funding from the Fondo Europeo de Desarollo Regional (FEDER) by the European Commission under grant agreement numbers IE17-5670 and US-15570. This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014-2018 and 2019-2020 under grant agreement No 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Self-adaptive diagnostic of radial fast-ion loss measurements on the ASDEX Upgrade tokamak (invited)

  • González-Martín, Javier
  • García-Muñoz, M.
  • Sieglin, B.
  • Herrmann, A.
  • Lunt, T.
  • Ayllón Guerola, Juan Manuel
  • Galdón Quiroga, Joaquín
  • Hidalgo-Salaverri, Javier
  • Kovacsik, A.
  • Rivero-Rodriguez, J.F.
  • Sanchís Sánchez, Lucía
  • Silvagni, D.
  • Zoletnik, S.
  • Dominguez-Palacios, J.
  • ASDEX Upgrade Team
  • MST1 Team
A poloidal array of scintillator-based Fast-Ion Loss Detectors (FILDs) has been installed in the ASDEX Upgrade (AUG) tokamak. While all AUG FILD systems are mounted on reciprocating arms driven externally by servomotors, the reciprocating system of the FILD probe located just below the midplane is based on a magnetic coil that is energized in real-time by the AUG discharge control system. This novel reciprocating system allows, for the first time, real-time control of the FILD position including infrared measurements of its probe head temperature to avoid overheating. This considerably expands the diagnostic operational window, enabling unprecedented radial measurements of fast-ion losses. Fast collimator-slit sweeping (up to 0.2 mm/ms) is used to obtain radially resolved velocity-space measurements along 8 cm within the scrape-off layer. This provides a direct evaluation of the neutral beam deposition profiles via first-orbit losses. Moreover, the light-ion beam probe (LIBP) technique is used to infer radial profiles of fast-ion orbit deflection. This radial-LIBP technique is applied to trapped orbits (exploring both the plasma core and the FILD stroke near the wall), enabling radial localization of internal plasma fluctuations (neoclassical tearing modes). This is quantitatively compared against electron cyclotron emission measurements, showing excellent agreement. For the first time, radial profiles of fast-ion losses in MHD quiescent plasmas as well as in the presence of magnetic islands and edge localized modes are presented., This work was carried out within the framework of the EUROfusion Consortium and received funding from the Euratom Research and Training Programme 2014–2018 and 2019–2020 under Grant Agreement No. 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission. This research also received funding from the Spanish Ministry of Science under Grant No. FPU15/06074.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Upgrade and absolute calibration of the JET scintillator-based fast-ion loss detector

  • Rivero-Rodriguez, J.F.
  • Pérez von Thun, C.
  • García-Muñoz, M.
  • Beaumont, P.
  • Kiptily, V.
  • García López, J.
  • Goloborodko, V.
  • Jiménez-Ramos, M. C.
  • Schoepf, K.
  • Yavorskij, V.
  • JET Contributors
The JET FILD is a scintillator-based Fast-ion Loss Detector optimized to measure fusion-born alpha-particle losses. This work covers its upgrade and absolute calibration in preparation for the following JET DT experiments. A fast scintillator material (TG-Green) has been installed in the JET FILD. A heater jacket is installed around the fiber bundle, responsible for transmitting the light from the scintillator plate, to anneal the fiber obscuring due to neutron damage. The JET FILD has been upgraded with a 1 Mpx camera and 2 MHz photomultiplier data acquisition hardware. Full-orbit simulations give an estimate of the shading effects on the scintillator plate of the first wall structures and provide a synthetic signal of the JET FILD. A detector instrument function enables absolute values of fast-ion losses using calibration factors. The calibration factors are made available in a shot-to-shot basis for the characterized species and energies and with corrections for the diagnostic conditions. The fast acquisition system sets the Nyquist frequency (1 MHz) above the typical mode frequencies (≈10 kHz), thus making it possible to identify MHD-induced fast-ion losses., This work was carried out within the framework of the EUROfusion Consortium and received funding from the Euratom Research and Training Programme 2014–2018 and 2019–2020 under Grant Agreement No. 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission. This research received funding from the V Plan Propio de Investigación de la Universidad de Sevilla (Grant No. PP2016-7145). This scientific work was partly supported by the Polish Ministry of Science and Higher Education within the framework of the scientific financial resources in the year 2020 allocated for the realization of the international co-financed project (No. 5118/H2020/EURATOM/2020/2).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Shock Hugoniot data for water up to 5 Mbar obtained with quartz standard at high-energy laser facilities

  • Mancelli, Donaldi
  • Errea, Ion
  • Maeda, Y.
  • Rosmej, O.
  • Neumayer, P.
  • Martynenko, A. S.
  • Batani, Dimitri
et al., In this work, we present experimental results on the behavior of liquid water at megabar pressure. The experiment was performed using the HIPER (High-Intensity Plasma Experimental Research) laser facility, a uniaxial irradiation chamber of GEKKO XII (GXII) at the Institute of Laser Engineering (ILE), and the PHELIX at GSI (GSI Helmholtz Centre for Heavy Ion Research), a single-beam high-power laser facility, to launch a planar shock into solid multilayered water samples. Equation-of-state data of water (H2O) are obtained in the pressure range 0.50–4.6 Mbar by tuning the laser-drive parameters. The Hugoniot parameters (pressure, density, etc.) and the shock temperature were simultaneously determined by using VISAR and SOP as diagnostic tools and quartz as the standard material for impedance mismatch experiments. Finally, our experimental results are compared with hydrodynamic simulations tested with different equations of state, showing good compatibility with tabulated SESAME tables for water., The authors would like to acknowledge the support of the laser technical team at GEKKO XII (ILE) and PHELIX (GSI). This work received funding from the Euratom Research and Training Program 2014–2018 and 2019-2020 (Grant agreement no. 633053). The involved teams were operated within the framework of the Enabling Research Project ENR-IFE19.CEA-01, Study of Direct Drive and Shock Ignition for IFE: Theory, Simulations, Experiments, Diagnostics Development. JIHT RAS team members were supported by the Ministry of Science and Higher Education of the Russian Federation (State Assignment no. 075-00460-21-00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Investigation of diethanolamine (DEA) as a chelating agent in the fabrication of fluorine-free propionate route YBa2Cu3O7 (YBCO) thin films

  • Daniel, Andrada
  • Nasui, Mircea
  • Petrisor, Traian
  • Sonher, Ramona Bianca
  • Augieri, Andrea
  • Pop, Cornelia
  • Palau, Anna
  • Vannozzi, Angelo
  • Celentano, Giuseppe
  • Ciontea, Lelia
  • Petrisor, Traian
The role of diethanolamine (DEA) as a chelating agent was investigated in a fluorine-free precursor solution for the growth of superconducting YBa2Cu3O7 (YBCO) thin films via chemical solution deposition. Infrared spectroscopy and thermal analyses were employed to elucidate the interactions between the chelating agent and propionate-based coating solution. The physical properties of the as-obtained YBCO films were investigated to assess the effect of DEA addition on film growth. Special emphasis was placed on the determination of superconducting transport properties. These have been investigated in wide magnetic field (0-18 T) and temperature (4.5-77 K) ranges to account for various possible application scenarios. The 100 nm thick YBCO film deposited on a (001) SrTiO3 single-crystal substrate exhibited a critical current density of 4 MA cm-2 at 77 K in self-field., This work was carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom program 2014–2018 and 2019–2020 under Grant Agreement No. 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission. A D acknowledges the financial support of the 'Entrepreneurial skills and research excellence in doctoral and postdoctoral programs -ANTREDOC'—POCU/380/6/13/123927 project. M N and T P Jr acknowledge the financial support of a grant of the Romanian Ministry of Education and Research, CNCS-UEFISCDI, project number PN-III-P1-1.1-TE-2021-1777, within PNCDI III., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Non-parametric inference of impurity transport coefficients in the ASDEX Upgrade tokamak

  • Nishizawa, Atsushi J.
  • Dux, R.
  • McDermott, R.M.
  • Sciortino, Francesco
  • Cavedon, M.
  • Schuster, Christian
  • Wolfrum, E.
  • Toussaint, U. von
  • Jansen van Vuuren, A.
  • Cruz-Zabala, D.J.
  • Cano Megías, Pilar
  • Moon, C.
  • ASDEX Upgrade Team
We present a non-parametric inference of impurity transport coefficients by using charge exchange recombination spectroscopy measurements of Ne X, Ne VIII, O VIII, and C VI lines. Due to their close atomic numbers, neon, oxygen and carbon impurity ions are assumed to have the same diffusion coefficient D and convection velocity v. Unlike conventional techniques that modulate or perturb the impurity contents, we employ a quasi-stationary plasma with static impurity profiles. Since the ratio of v to D only describes the equilibrated profile of the sum of all impurity charge states, steady-state measurements can still decouple D and v if different charge states are simultaneously observed. We have formulated a non-parametric analysis framework based on the Bayesian probability theory and conducted transport coefficient measurements for a Type III ELMy H-mode plasma at ASDEX Upgrade. The charge exchange reactions with the background neutrals, which are known to affect the impurity charge state balance, are taken into account by introducing additional free parameters. While D at the pedestal is close to the neoclassical level ( < 1 m s-2), a large diffusion coefficient and a strong outward convection are inferred right inside the pedestal top., This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014–2018 and 2019–2020 under Grant Agreement No. 633053.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Influence of growth temperature on the pinning landscape of YBa2Cu3O7−δ films grown from Ba-deficient solutions

  • Alcalà, Jordi
  • Ternero, Pau
  • Pop, Cornelia
  • Piperno, Laura
  • Ricart, Susagna
  • Mestres, Narcís
  • Puig Molina, Teresa
  • Obradors, Xavier
  • Meledin, Alexander
  • Celentano, Giuseppe
  • Palau, Anna
Cuprate coated conductors are promising materials for the development of large-scale applications, having superior performance over other superconductors. Tailoring their vortex pinning landscape through nanostructure engineering is one of the major challenges to fulfill the specific application requirements. In this work, we have studied the influence of the growth temperature on the generation of intrinsic pinning defects in YBa2Cu3O7-δ films grown by chemical solution deposition using low Ba precursor solutions. We have analysed the critical current density as a function of the temperature, applied magnetic field magnitude and orientation, J c(T,H,θ), to elucidate the nature and strength of pinning sites and correlate the microstructure of the films with their superconducting performance. An efficient pinning landscape consisting of stacking faults and associated nanostrain is naturally induced by simply tuning the growth temperature without the need to add artificial pinning sites. Samples grown at an optimized temperature of 750 °C show very high self-field J c values correlated with an overdoped state and improved J c(T,H,θ) performances., This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom Research and Training Programme 2014–2018 and 2019–2020 under Grant Agreement No. 633 053. The views and opinions expressed herein do not necessarily reflect those of the European Commission. TEM analysis was funded from the EU Horizon 2020 research and innovation program under grant agreement 823717—ESTEEM3. The authors acknowledge financial support from Spanish Ministry of Economy and Competitiveness through the 'Severo Ochoa' Programme for Centres of Excellence in R&D (SEV-2015-0496 and CEX2019-000917-S), SuMaTe RTI2018-095853-B-C21, co-financed by the European Regional Development Fund), the Catalan Government with Grant 2017-SGR-1519 and the EU COST action NANOCOHYBRI CA16218. We also acknowledge the Scientific Services at ICMAB. J A like to thank the UAB PhD program in Materials Science., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The TechnoFusion Consortium of Spanish institutions and facilities towards the development of fusion materials and related technologies in Europe

  • González, M.
  • Román, R.
  • Bañares, Luis
  • Ferre, M.
  • García, G.
  • González-Arrabal, Raquel
  • Ibarra, A.
  • Monge, M. Ángeles
  • Olivares Villegas, José
  • Perlado, J.M.
  • Rapisarda, D.
  • Sánchez, F.
  • Sanz, J.
  • Seco Granja, Fernando
  • Vila, R.
14 pags., 10 figs., With the objective of contributing to the European development of materials, technologies and facilities for the demonstration of the thermonuclear fusion, the construction of the unique TechnoFusión facility was planned in 2009. The TechnoFusión consortium, formed by selected Spanish research groups and laboratories located in Madrid, has jointly advanced in the search for solutions to the remaining technological issues of nuclear fusion by magnetic and inertial confinement. In addition, the foundation of the TechnoFusión partnership has been essential to create a network of collaborations, and also to expand and specialize human resources, by training scientists and technical staff in the use of high-tech tools. Supported by the TechnoFusión_Comunidad Madrid (III) regional programme, the consortium is focused on providing support for the construction of medium-­sized, relevant facilities in Madrid (Spain). Regarding magnetic and inertial fusion issues, the programme is structured in several key experiments and infrastructures, which combine the development of materials, of cutting-edge technologies and the construction of associated facilities, with the progress in simulation and application of computational neutronics:, The authors acknowledge the funding by Community of Madrid, co-financed with Structural Funds (ERDF and ESF)), through the TechnoFusión (III)-CM (S2018/EMT-4437) programme. This work has also been carried out within the framework of the EUROfusion Consortium and has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement number 633053. The views and opinions expressed in this document do not necessarily reflect those of the European Commission. In particular, R. González-Arrabal acknowledges the Convenio Plurianual con la Universidad Politécnica de Madrid en la línea de actuación Programa de Excelencia para el Profesorado Universitario of the CAM (Comunidad Autónoma Madrid).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effects of density gradients and fluctuations at the plasma edge on ECEI measurements at ASDEX Upgrade

  • Vanovac, B.
  • Wolfrum, E.
  • Denk, Severin S.
  • Mink, F.
  • Laggner, F.M.
  • Birkenmeier, Gregor
  • Willensdorfer, M.
  • Viezzer, Eleonora
  • Hoelzel, M.
  • Freethy, S.
Electron cyclotron emission imaging (ECEI) provides measurements of electron temperature (Te) and its fluctuations (δTe). However, when measuring at the plasma edge, in the steep gradient region, radiation transport effects must be taken into account. It is shown that due to these effects, the scrape-off layer region is not accessible to the ECEI measurements in steady state conditions and that the signal is dominated by the shine-through emission. Transient effects, such as filaments, can change the radiation transport locally, but cannot be distinguished from the shine-through. Local density measurements are essential for the correct interpretation of the electron cyclotron emission, since the density fluctuations influence the temperature measurements at the plasma edge. As an example, a low frequency 8 kHz mode, which causes 10%–15% fluctuations in the signal level of the ECEI, is analysed. The same mode has been measured with the lithium beam emission spectroscopy density diagnostic, and is very well correlated in time with high frequency magnetic fluctuations. With radiation transport modelling of the electron cyclotron radiation in the ECEI geometry, it is shown that the density contributes significantly to the radiation temperature (Trad) and the experimental observations have shown the amplitude modulation in both density and temperature measurements. The poloidal velocity of the low frequency mode measured by the ECEI is 3 km s–1. The calculated velocity of the high frequency mode measured with the magnetic pick-up coils is about 25 km s–1. Velocities are compared with the E × B background flow velocity and possible explanations for the origin of the low frequency mode are discussed., This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014-2018 under grant agreement No 633053., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Thermo-mechanical limits of a magnetically driven fast-ion loss detector in the ASDEX Upgrade tokamak

  • Hidalgo-Salaverri, Javier
  • González-Martín, Javier
  • Ayllón Guerola, Juan Manuel
  • García-Muñoz, M.
  • Sieglin, B.
  • Galdón Quiroga, Joaquín
  • Silvagni, D.
  • Viezzer, Eleonora
  • Rueda-Rueda, José
  • Lunt, T.
Proceeding paper of the 4th European Conference on Plasma Diagnostics (ECPD2021) 7–11 June, 2021, A real-time control system is being developed for a magnetically driven Fast-Ion Loss Detector (FILD) at the ASDEX Upgrade tokamak. The insertion of the diagnostic head will be adjusted in real-time to react to changes in the graphite head temperature, plasma position and appearance of MHD instabilities. The graphite probe head of the detector is exposed to an intense heat flux (located ∼3–5 cm from separatrix). The control algorithm performance is constrained by: the graphite head sublimation temperature, the ultimate stress limit, the reaction time of the controller and the retraction time. In this work, the temperature and thermal induced stress distribution on the probe head are assessed to determine what temperature-related magnitude is the limiting factor. The heat flux at the probe head has been estimated using the time-averaged parallel heat flux measured at the divertor target via infrared thermography. A field line tracing algorithm determines which regions of the probe head receives a weighted heat flux due to shadowing (self-induced or from other structures) and the incidence angle of the field lines. A finite element model is used to simulate the temporal evolution of the graphite head temperature and to obtain the induced thermal stress. The temperature spatial distribution at the probe head is validated against measurements of the probe head for different FILD systems showing a good agreement. These measurements have been obtained from visible cameras with an infrared filter. The model concludes that the maximum stress (∼100 MPa) does not overcome the graphite mechanical limit (170 MPa) and that the probe head is not affected by fatigue. Therefore, the graphite sublimation temperature (2000 °C) is set as the limiting factor of the new control system., This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom Research and Training Programme 2014–2018 and 2019–2020 under Grant Agreement No. 633053., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Millimeter-wave beam scattering and induced broadening by plasma turbulence in the TCV tokamak

  • Chellaï, Oulfa
  • Alberti, S.
  • Furno, I.
  • Goodman, T. P.
  • Maj, O.
  • Merlo, G.
  • Poli, E.
  • Ricci, P.
  • Riva, F.
  • Weber, H.
  • TCV Team
Ayllón Guerola, Juan Manuel forma parte del TCV Team, The scattering of millimeter-wave beams from electron density fluctuations and the associated beam broadening are experimentally demonstrated. Using a dedicated setup, instantaneous deflection and (de-)focusing of the beam due to density blobs on the beam path are shown to agree with full-wave simulations. The detected time-averaged wave power transmitted through the turbulent plasma is reproduced by the radiative-transfer model implemented in the WKBeam code, which predicts a ∼50% turbulence-induced broadening of the beam cross-section. The role of core turbulence for the considered geometry is highlighted., This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014–2018 and 2019–2020 under Grant Agreement No. 633053., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Recent progress in the quantitative validation of JOREK simulations of ELMs in JET

  • Pamela, S.J.P.
  • Huijsmans, G.T.A.
  • Eich, T.
  • Saarelma, Samuli
  • Lupelli, I.
  • Maggi, C.F.
  • Giroud, C.
  • Chapman, I.T.
  • Smith, S.F.
  • Frassinetti, L.
  • Becoulet, M.
  • Hoelzl, M.
  • Orain, F.
  • Futatani, S.
  • JET Contributors
Future devices like JT-60SA, ITER and DEMO require quantitative predictions of pedestal density and temperature levels, as well as inter-ELM and ELM divertor heat fluxes, in order to improve global confinement capabilities while preventing divertor erosion/melting in the planning of future experiments. Such predictions can be obtained from dedicated pedestal models like EPED, and from non-linear MHD codes like JOREK, for which systematic validation against current experiments is necessary. In this paper, we show progress in the quantitative validation of the JOREK code using JET simulations. Results analyse the impact of diamagnetic terms on the dynamics and size of the ELMs, and evidence is provided that the onset of type-I ELMs is not governed by linear MHD stability alone, but that a nonlinear threshold could be responsible for large MHD events at the plasma edge., This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014–2018 under grant agreement No 633053, and from the RCUK Energy Programme (grant number EP/I501045). To obtain further information on the data and models underlying this paper please contact PublicationsManagerccfe.ac.uk. This work used the HELIOS supercomputer (IFERC-CSC), Japan, under the Broader Approach collaboration, implemented by Fusion for Energy and JAEA. The views and opinions expressed herein do not necessarily reflect those of the European Commission or the ITER Organization. The HEC ARCHER computer (UK), as part of the Plasma HEC Consortium EPSRC grant EP/L000237/1, and the MARCONI computer at CINECA in Italy, were also used., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Fusion product losses due to fishbone instabilities in deuterium JET plasmas

  • Kiptily, V.G.
  • Fitzgerald, M.
  • Goloborodko, V.
  • Sharapov, S.E.
  • Challis, C.D.
  • Frigione, D.
  • Graves, J.
  • Mantsinen, Mervi
  • Beaumont, P.
  • Garcia-Munoz, M.
  • Perez von Thun, C.
  • Rodriguez, J.F.R.
  • Darrow, D.
  • Keeling, D.
  • King, D.
  • McClements, K.G.
  • Solano, E.R.
  • Schmuck, S.
  • Sips, G.
  • Szepesi, G.
  • JET Contributors
During development of a high-performance hybrid scenario for future deuterium–tritium experiments on the Joint European Torus, an increased level of fast ion losses in the MeV energy range was observed during the instability of high-frequency n  =  1 fishbones. The fishbones are excited during deuterium neutral beam injection combined with ion cyclotron heating. The frequency range of the fishbones, 10–25 kHz, indicates that they are driven by a resonant interaction with the NBI-produced deuterium beam ions in the energy range  ≤120 keV. The fast particle losses in a much higher energy range are measured with a fast ion loss detector, and the data show an expulsion of deuterium plasma fusion products, 1 MeV tritons and 3 MeV protons, during the fishbone bursts. An MHD mode analysis with the MISHKA code combined with the nonlinear wave-particle interaction code HAGIS shows that the loss of toroidal symmetry caused by the n  =  1 fishbones affects strongly the confinement of non-resonant high energy fusion-born tritons and protons by perturbing their orbits and expelling them. This modelling is in a good agreement with the experimental data., This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014-2018 under grant agreement No 633053 and from the RCUK Energy Programme [grant No EP/P012450/1]. To obtain further information on the data and models underlying this paper please contact PublicationsManager@ukaea.uk . The views and opinions expressed herein do not necessarily reflect those of the European Commission, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Physics and applications of three-ion ICRF scenarios for fusion research

  • Kazakov, Ye. O.
  • Ongena, Jozef
  • Wright, John
  • Wukitch, Stephen J.
  • Bobkov, Volodymyr
  • Mantsinen, Mervi
  • Gallart, Daniel|||0000-0003-1663-3550
This paper summarizes the physical principles behind the novel three-ion scenarios using radio frequency waves in the ion cyclotron range of frequencies (ICRF). We discuss how to transform mode conversion electron heating into a new flexible ICRF technique for ion cyclotron heating and fast-ion generation in multi-ion species plasmas. The theoretical section provides practical recipes for selecting the plasma composition to realize three-ion ICRF scenarios, including two equivalent possibilities for the choice of resonant absorbers that have been identified. The theoretical findings have been convincingly confirmed by the proof-of-principle experiments in mixed H?D plasmas on the Alcator C-Mod and JET tokamaks, using thermal 3He and fast D ions from neutral beam injection as resonant absorbers. Since 2018, significant progress has been made on the ASDEX Upgrade and JET tokamaks in H?4He and H?D plasmas, guided by the ITER needs. Furthermore, the scenario was also successfully applied in JET D?3He plasmas as a technique to generate fusion-born alpha particles and study effects of fast ions on plasma confinement under ITER-relevant plasma heating conditions. Tuned for the central deposition of ICRF power in a small region in the plasma core of large devices such as JET, three-ion ICRF scenarios are efficient in generating large populations of passing fast ions and modifying the q-profile. Recent experimental and modeling developments have expanded the use of three-ion scenarios from dedicated ICRF studies to a flexible tool with a broad range of different applications in fusion research. AB - This paper summarizes the physical principles behind the novel three-ion scenarios using radio frequency waves in the ion cyclotron range of frequencies (ICRF). We discuss how to transform mode conversion electron heating into a new flexible ICRF technique for ion cyclotron heating and fast-ion generation in multi-ion species plasmas. The theoretical section provides practical recipes for selecting the plasma composition to realize three-ion ICRF scenarios, including two equivalent possibilities for the choice of resonant absorbers that have been identified. The theoretical findings have been convincingly confirmed by the proof-of-principle experiments in mixed H?D plasmas on the Alcator C-Mod and JET tokamaks, using thermal 3He and fast D ions from neutral beam injection as resonant absorbers. Since 2018, significant progress has been made on the ASDEX Upgrade and JET tokamaks in H?4He and H?D plasmas, guided by the ITER needs. Furthermore, the scenario was also successfully applied in JET D?3He plasmas as a technique to generate fusion-born alpha particles and study effects of fast ions on plasma confinement under ITER-relevant plasma heating conditions. Tuned for the central deposition of ICRF power in a small region in the plasma core of large devices such as JET, three-ion ICRF scenarios are efficient in generating large populations of passing fast ions and modifying the q-profile. Recent experimental and modeling developments have expanded the use of three-ion scenarios from dedicated ICRF studies to a flexible tool with a broad range of different applications in fusion research., The authors are grateful to the anonymous reviewers for their constructive comments that allowed us to improve the paper, I. Voitsekhovitch for her valuable comments and suggestions during the paper preparation, and to H. Meyer and J. Faustin for fruitful discussions. We thank the ITPA Energetic Particle Physics Topical Group for its support. This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014–2018 and 2019–2020 under Grant Agreement No. 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission. Part of this work was also carried out in the framework of projects done for the ITER Scientist Fellow Network (ISFN). ITER is the Nuclear Facility INB No. 174. The views and opinions expressed herein do not necessarily reflect those of the ITER Organization. This publication is provided for scientific purposes only. Its contents should not be considered as commitments from the ITER Organization as a nuclear operator in the frame of the licensing process., Peer Reviewed, "Article signat per 67 autors/es: Ye. O. Kazakov, J. Ongena, J. C. Wright, S. J. Wukitch, V. Bobkov, J. Garcia, V. G. Kiptily, M. J. Mantsinen, M. Nocente, M. Schneider, H. Weisen, Y. Baranov, M. Baruzzo, R. Bilato, A. Chomiczewska, R. Coelho, T. Craciunescu K. Crombé, M. Dreval, R. Dumont, P. Dumortier, F. Durodié, J. Eriksson, M. Fitzgerald, J. Galdon-Quiroga, D. Gallart, M. Garcia-Muñoz, L. Giacomelli, C. Giroud, J. Gonzalez-Martin, A. Hakola, P. Jacquet, T. Johnson, A. Kappatou, D. Keeling, D. King, K. K. Kirov, P. Lamalle, M. Lennholm, E. Lerche, M. Maslov, S. Mazzi, S. Menmuir, I. Monakhov5, F. Nabais, M. F. F. Nave, R. Ochoukov, A. R. Polevoi, S. D. Pinches, U. Plank, D. Rigamonti, M. Salewski, P. A. Schneider, S. E. Sharapov, Ž. Štancar, A. Thorman, D. Valcarcel, D. Van Eester, M. Van Schoor, J. Varje, M. Weiland, N. Wendler, JET Contributors, ASDEX Upgrade Team, EUROfusion MST1 Team, and Alcator C-Mod Team"
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

ICRH physics and technology achievements in JET-ILW

  • Jacquet, P.
  • van Eester, D.
  • Lerche, E.
  • Bobkov, V.
  • Blackman, T.
  • Colas, L.
  • Challis, C.
  • Czarnecka, A.
  • Dumortier, P.
  • Frigione, D.
  • Durodié, F.
  • Garzotti, L.
  • Goniche, M.
  • Graves, J.
  • Kazakov, Y.
  • Kirov, K.
  • Klepper, C.C.
  • Krawczyk, N.
  • Krivska, A.
  • Mantsinen, Mervi
  • Monakhov, I.
  • Nunes, I.
  • Ongena, J.
  • Reinke, M.
  • Rimini, F.
  • Zhang, W.
  • JET Contributors
ICRH was extensively used in the 2015-16 JET-ILW (ITER like wall) experimental campaign; bulk heating together with high-Z impurity chase-out from plasma centre importantly contributed to the good DD fusion performance obtained recently in JET. Power up to 6 MW was launched in H-mode deuterium plasmas and 8 MW during the hydrogen campaign. The ILA was re-installed and contributed positively to the availability of ICRH power. The ILA produces slightly less high-Z impurities than the A2's and the PWI measured via Be line emission on limiters is in the same ballpark. Specific experiments were conducted to optimise ICRH scenarios in preparation for DT in particular the dual frequency scheme, (H)D and (He)D were tested. In addition, it was confirmed that the (D)H scenario is accessible in a ILW environment and the novel 3-ions ICRH scheme was validated experimentally., This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014-2018 under grant agreement No 633053 and from the RCUK Energy Programme [grant number EP/P012450/1]. The views and opinions expressed herein do not necessarily reflect those of the European Commission 'To obtain further information on the data and models underlying this paper please contact PublicationsManager@ukaea.uk., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Progress from ASDEX Upgrade experiments in preparing the physics basis of ITER operation and DEMO scenario development

  • Stroth, Ulrich
  • Aguiam, Diogo
  • Alessi, Edoardo
  • Angioni, Clemente
  • Arden, Nils
  • Futatani, Shimpei|||0000-0001-5742-5454
  • Gallart Escolà, Daniel
  • Mantsinen, Mervi
An overview of recent results obtained at the tokamak ASDEX Upgrade (AUG) is given. A work flow for predictive profile modelling of AUG discharges was established which is able to reproduce experimental H-mode plasma profiles based on engineering parameters only. In the plasma center, theoretical predictions on plasma current redistribution by a dynamo effect were confirmed experimentally. For core transport, the stabilizing effect of fast ion distributions on turbulent transport is shown to be important to explain the core isotope effect and improves the description of hollow low-Z impurity profiles. The L–H power threshold of hydrogen plasmas is not affected by small helium admixtures and it increases continuously from the deuterium to the hydrogen level when the hydrogen concentration is raised from 0 to 100%. One focus of recent campaigns was the search for a fusion relevant integrated plasma scenario without large edge localised modes (ELMs). Results from six different ELM-free confinement regimes are compared with respect to reactor relevance: ELM suppression by magnetic perturbation coils could be attributed to toroidally asymmetric turbulent fluctuations in the vicinity of the separatrix. Stable improved confinement mode plasma phases with a detached inner divertor were obtained using a feedback control of the plasma β. The enhanced Dα H-mode regime was extended to higher heating power by feedback controlled radiative cooling with argon. The quasi-coherent exhaust regime was developed into an integrated scenario at high heating power and energy confinement, with a detached divertor and without large ELMs. Small ELMs close to the separatrix lead to peeling-ballooning stability and quasi continuous power exhaust. Helium beam density fluctuation measurements confirm that transport close to the separatrix is important to achieve the different ELM-free regimes. Based on separatrix plasma parameters and interchange-drift-Alfvén turbulence, an analytic model was derived that reproduces the experimentally found important operational boundaries of the density limit and between L- and H-mode confinement. Feedback control for the X-point radiator (XPR) position was established as an important element for divertor detachment control. Stable and detached ELM-free phases with H-mode confinement quality were obtained when the XPR was moved 10 cm above the X-point. Investigations of the plasma in the future flexible snow-flake divertor of AUG by means of first SOLPS-ITER simulations with drifts activated predict beneficial detachment properties and the activation of an additional strike point by the drifts., This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014–2018 and 2019–2020 under Grant Agreement No. 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission., Peer Reviewed, "Article signat per més de 50 autors/es: U. Stroth, D. Aguiam, E. Alessi, C. Angioni, N. Arden, R. Arredondo Parra, V. Artigues, O. Asunta, M. Balden, V. Bandaru, A. Banon-Navarro, K. Behler, A. Bergmann, M. Bergmann, J. Bernardo, M. Bernert, A. Biancalani, R. Bielajew, R. Bilato, G. Birkenmeier, T. Blanken, V. Bobkov, A. Bock, T. Body, T. Bolzonella, N. Bonanomi, A. Bortolon, B. Böswirth, C. Bottereau, A. Bottino, H. van den Brand, M. Brenzke, S. Brezinsek, D. Brida, F. Brochard, C. Bruhn, J. Buchanan, A. Buhler, A. Burckhart, Y. Camenen, B. Cannas, P. Cano Megias, D. Carlton, M. Carr, P. Carvalho, C. Castaldo, M. Cavedon, C. Cazzaniga, C. Challis, A. Chankin, C. Cianfarani, F. Clairet, S. Coda, R. Coelho, J.W. Coenen, L. Colas, G. Conway, S. Costea, D. Coster, T. Cote, A.J. Creely, G. Croci, D.J. Cruz Zabala, G. Cseh, A. Czarnecka, I. Cziegler, O. D'Arcangelo, A. Dal Molin, P. David, C. Day, M. de Baar, P. de Marné, R. Delogu, S. Denk, P. Denner, A. Di Siena, J.J. Dominguez Palacios Durán, D. Dunai, A. Drenik, M. Dreval, R. Drube, M. Dunne, B.P. Duval, R. Dux, T. Eich, S. Elgeti, A. Encheva, K. Engelhardt, B. Erdös, I. Erofeev, B. Esposito, E. Fable, M. Faitsch, U. Fantz, M. Farnik, H. Faugel, F. Felici, O. Ficker, S. Fietz, A. Figueredo, R. Fischer, O. Ford, L. Frassinetti, M. Fröschle, G. Fuchert, J.C. Fuchs, H. Fünfgelder, S. Futatani, K. Galazka, J. Galdon-Quiroga, D. Gallart Escolà, A. Gallo10, Y. Gao11, S. Garavaglia3, M. Garcia Muñoz16, B. Geiger21, L. Giannone1, S. Gibson32, L. Gil2, E. Giovannozzi18, S. Glöggler1, M. Gobbin8, J. Gonzalez Martin, T. Goodman, G. Gorini, T. Görler, D. Gradic, G. Granucci, A. Gräter, H. Greuner, M. Griener, M. Groth, A. Gude, L. Guimarais, S. Günter, G. Haas, A.H. Hakola, C. Ham, T. Happel, N. den Harder, G. Harrer, J. Harrison, V. Hauer, T. Hayward-Schneider, B. Heinemann, T. Hellsten, S. Henderson, P. Hennequin, A. Herrmann, E. Heyn, F. Hitzler, J. Hobirk, K. Höfler, J.H. Holm, M. Hölzl, C. Hopf, L. Horvath, T. Höschen, A. Houben, A. Hubbard, A. Huber, K. Hunger, V. Igochine, M. Iliasova, T. Ilkei, K. Insulander Björk, C. Ionita-Schrittwieser, I. Ivanova-Stanik, W. Jacob, N. Jaksic, F. Janky, A. Jansen van Vuuren, A. Jardin, F. Jaulmes, F. Jenko, T. Jensen, E. Joffrin, A. Kallenbach, S. Kálvin, M. Kantor, A. Kappatou, O. Kardaun, J. Karhunen4, C.-P. Käsemann, S. Kasilov, A. Kendl, W. Kernbichler, E. Khilkevitch, A. Kirk, S. Kjer Hansen, V. Klevarova, G. Kocsis, M. Koleva, M. Komm, M. Kong, A. Krämer-Flecken, K. Krieger, A. Krivska, O. Kudlacek, T. Kurki-Suonio, B. Kurzan, B. Labit, K. Lackner, F. Laggner, A. Lahtinen, P.T. Lang, P. Lauber, N. Leuthold, L. Li, J. Likonen, O. Linder, B. Lipschultz, Y. Liu, A. Lohs, Z. Lu, T. Luda di Cortemiglia, N.C. Luhmann, T. Lunt, A. Lyssoivan, T. Maceina, J. Madsen, A. Magnanimo, H. Maier, J. Mailloux, R. Maingi, O. Maj, E. Maljaars, P. Manas, A. Mancini, A. Manhard, P. Mantica, M. Mantsinen, P. Manz, M. Maraschek, C. Marchetto, L. Marrelli, P. Martin, A. Martitsch, F. Matos, M. Mayer, M.-L. Mayoral, D. Mazon, P.J. McCarthy, R. McDermott, R. Merkel, A. Merle, D. Meshcheriakov, H. Meyer, D. Milanesio, P. Molina Cabrera, F. Monaco, M. Muraca, F. Nabais, V. Naulin, R. Nazikian, R.D. Nem, A. Nemes-Czopf, G. Neu, R. Neu, A.H. Nielsen, S.K. Nielsen, T. Nishizawa, M. Nocente, J.-M. Noterdaeme, I. Novikau, S. Nowak, M. Oberkofler, R. Ochoukov, J. Olsen, F. Orain, F. Palermo, O. Pan, G. Papp, I. Paradela Perez, A. Pau, G. Pautasso, C. Paz-Soldan, P. Petersson, P. Piovesan, C. Piron, U. Plank, B. Plaum, B. Plöck, V. Plyusnin, G. Pokol, E. Poli, L. Porte, T. Pütterich, M. Ramisch, J. Rasmussen, G. Ratta, S. Ratynskaia, G. Raupp, D. Réfy, M. Reich1, F. Reimold, D. Reiser, M. Reisner, D. Reiter, T. Ribeiro, R. Riedl, J. Riesch, D. Rittich, J.F. Rivero Rodriguez, G. Rocchi, P. Rodriguez-Fernandez, M. Rodriguez-Ramos, V. Rohde, G. Ronchi, A. Ross, M. Rott, M. Rubel, D.A. Ryan, F. Ryter, S. Saarelma, M. Salewski, A. Salmi, O. Samoylov, L. Sanchis Sanchez, J. Santos, O. Sauter, G. Schall, K. Schlüter, K. Schmid, O. Schmitz, P.A. Schneider, R. Schrittwieser, M. Schubert, C. Schuster, T. Schwarz-Selinger, J. Schweinzer, E. Seliunin, A. Shabbir, A. Shalpegin, S. Sharapov, U. Sheikh, A. Shevelev, G. Sias, M. Siccinio, B. Sieglin, A. Sigalov, A. Silva, C. Silva, D. Silvagni, J. Simpson, S. Sipilä, E. Smigelskis, A. Snicker, E. Solano, C. Sommariva, C. Sozzi, G. Spizzo, M. Spolaore, A. Stegmeir, M. Stejner, J. Stober, E. Strumberge1, G. Suarez Lopez, H.-J. Sun, W. Suttrop, E. Sytova, T. Szepesi, B. Tál, T. Tala, G. Tardini, M. Tardocchi, D. Terranova, M. Teschke, E. Thorén, W. Tierens, D. Told, W. Treutterer, G. Trevisan, E. Trier, M. Tripský, M. Usoltceva, M. Valisa, M. Valovic, M. van Zeeland, F. Vannini, B. Vanovac, P. Varela, S. Varoutis, N. Vianello, J. Vicente, G. Verdoolaege, T. Vierle, E. Viezzer, I. Voitsekhovitch, U. von Toussaint, D. Wagner, X. Wang, M. Weiland, A.E. White, M. Willensdorfer, B. Wiringer, M. Wischmeier, R. Wolf, E. Wolfrum, Q. Yang, Q. Yu, R. Zagórski, I. Zammuto, T. Zehetbauer, W. Zhang, W. Zholobenko, M. Zilker, A. Zito, H. Zohm, S. Zoletnik and the EUROfusion MST1 Team "
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Overview of physics studies on ASDEX Upgrade

  • Meyer, H.
  • Aguiam, D.
  • Angioni, C.
  • Albert, C.G.
  • Arden, N.
  • Mantsinen, Mervi
  • Schmitz, O.
The ASDEX Upgrade (AUG) programme, jointly run with the EUROfusion MST1 task force, continues to significantly enhance the physics base of ITER and DEMO. Here, the full tungsten wall is a key asset for extrapolating to future devices. The high overall heating power, flexible heating mix and comprehensive diagnostic set allows studies ranging from mimicking the scrape-off-layer and divertor conditions of ITER and DEMO at high density to fully non-inductive operation (q95  =  5.5, ) at low density. Higher installed electron cyclotron resonance heating power   6 MW, new diagnostics and improved analysis techniques have further enhanced the capabilities of AUG. Stable high-density H-modes with MW m−1 with fully detached strike-points have been demonstrated. The ballooning instability close to the separatrix has been identified as a potential cause leading to the H-mode density limit and is also found to play an important role for the access to small edge-localized modes (ELMs). Density limit disruptions have been successfully avoided using a path-oriented approach to disruption handling and progress has been made in understanding the dissipation and avoidance of runaway electron beams. ELM suppression with resonant magnetic perturbations is now routinely achieved reaching transiently . This gives new insight into the field penetration physics, in particular with respect to plasma flows. Modelling agrees well with plasma response measurements and a helically localised ballooning structure observed prior to the ELM is evidence for the changed edge stability due to the magnetic perturbations. The impact of 3D perturbations on heat load patterns and fast-ion losses have been further elaborated. Progress has also been made in understanding the ELM cycle itself. Here, new fast measurements of and Er allow for inter ELM transport analysis confirming that Er is dominated by the diamagnetic term even for fast timescales. New analysis techniques allow detailed comparison of the ELM crash and are in good agreement with nonlinear MHD modelling. The observation of accelerated ions during the ELM crash can be seen as evidence for the reconnection during the ELM. As type-I ELMs (even mitigated) are likely not a viable operational regime in DEMO studies of 'natural' no ELM regimes have been extended. Stable I-modes up to have been characterised using -feedback. Core physics has been advanced by more detailed characterisation of the turbulence with new measurements such as the eddy tilt angle—measured for the first time—or the cross-phase angle of and fluctuations. These new data put strong constraints on gyro-kinetic turbulence modelling. In addition, carefully executed studies in different main species (H, D and He) and with different heating mixes highlight the importance of the collisional energy exchange for interpreting energy confinement. A new regime with a hollow profile now gives access to regimes mimicking aspects of burning plasma conditions and lead to nonlinear interactions of energetic particle modes despite the sub-Alfvénic beam energy. This will help to validate the fast-ion codes for predicting ITER and DEMO., This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014–2018 and 2019–2020 under grant agreement No. 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission., "Article signat per més de 100 autors/es: H. Meyer, for the AUG Team: D. Aguiam, C. Angioni, C.G. Albert, N. Arden, R. Arredondo Parra, O. Asunta, M. de Baar, M. Balden, V. Bandaru, K. Behler, A. Bergmann, J. Bernardo, M. Bernert, A. Biancalani, R. Bilato, G. Birkenmeier, T.C. Blanken, V. Bobkov, A. Bock, T. Bolzonella, A. Bortolon, B. Böswirth, C. Bottereau, A. Bottino, H. van den Brand, S. Brezinsek, D. Brida, F. Brochard, C. Bruhn, J. Buchanan, A. Buhler, A. Burckhart, Y. Camenen, D. Carlton, M. Carr, D. Carralero, C. Castaldo, M. Cavedon, C. Cazzaniga, S. Ceccuzzi, C. Challis, A. Chankin, S. Chapman, C. Cianfarani, F. Clairet, S. Coda, R. Coelho, J.W. Coenen, L. Colas, G.D. Conway, S. Costea, D.P. Coster, T.B. Cote, A. Creely, G. Croci, G. Cseh, A. Czarnecka, I. Cziegler, O. D'Arcangelo, P. David, C. Day, R. Delogu, P. de Marné, S.S. Denk, P. Denner, M. Dibon, A. Di Siena, D. Douai, A. Drenik, R. Drube, M. Dunne, B.P. Duval, R. Dux, T. Eich, S. Elgeti, K. Engelhardt, B. Erdös, I. Erofeev, B. Esposito, E. Fable, M. Faitsch, U. Fantz, H. Faugel, I. Faust, F. Felici, J. Ferreira, S. Fietz, A. Figuereido, R. Fischer, O. Ford, L. Frassinetti, S. Freethy, M. Fröschle, G. Fuchert, J.C. Fuchs, H. Fünfgelder, K. Galazka, J. Galdon-Quiroga, A. Gallo, Y. Gao, S. Garavaglia, A. Garcia-Carrasco, M. Garcia-Muñoz, B. Geiger, L. Giannone, L. Gil, E. Giovannozzi, C. Gleason-González, S. Glöggler, M. Gobbin, T. Görler, I. Gomez Ortiz, J. Gonzalez Martin, T. Goodman, G. Gorini, D. Gradic, A. Gräter, G. Granucci, H. Greuner, M. Griener, M. Groth, A. Gude, S. Günter, L. Guimarais, G. Haas, A.H. Hakola, C. Ham, T. Happel, N. den Harder, G.F. Harrer, J. Harrison, V. Hauer, T. Hayward-Schneider, C.C. Hegna, B. Heinemann, S. Heinzel, T. Hellsten, S. Henderson, P. Hennequin, A. Herrmann, M.F. Heyn, E. Heyn, F. Hitzler, J. Hobirk, K. Höfler, M. Hölzl, T. Höschen, J.H. Holm, C. Hopf, W.A. Hornsby, L. Horvath, A. Houben, A. Huber, V. Igochine, T. Ilkei, I. Ivanova-Stanik, W. Jacob, A.S. Jacobsen, F. Janky, A. Jansen van Vuuren, A. Jardin, F. Jaulmes, F. Jenko, T. Jensen, E. Joffrin, C.-P. Käsemann, A. Kallenbach, S. Kálvin, M. Kantor, A. Kappatou, O. Kardaun, J. Karhunen, S. Kasilov,, Y. Kazakov, W. Kernbichler, A. Kirk, S. Kjer Hansen, V. Klevarova, G. Kocsis, A. Köhn, M. Koubiti, K. Krieger, A. Krivska, A. Krämer-Flecken, O. Kudlacek, T. Kurki-Suonio, B. Kurzan, B. Labit, K. Lackner, F. Laggner, P.T. Lang, P. Lauber, A. Lebschy, N. Leuthold, M. Li, O. Linder, B. Lipschultz, F. Liu, Y. Liu, A. Lohs, Z. Lu, T. Luda di Cortemiglia, N.C. Luhmann, R. Lunsford, T. Lunt, A. Lyssoivan, T. Maceina, J. Madsen, R. Maggiora, H. Maier, O. Maj, J. Mailloux, R. Maingi, E. Maljaars, P. Manas, A. Mancini, A. Manhard, M.-E. Manso, P. Mantica, M. Mantsinen, P. Manz, M. Maraschek, C. Martens, P. Martin, L. Marrelli, A. Martitsch, M. Mayer, D. Mazon, P.J. McCarthy, R. McDermott, H. Meister, A. Medvedeva, R. Merkel, A. Merle, V. Mertens, D. Meshcheriakov, O. Meyer, J. Miettunen, D. Milanesio, F. Mink, A. Mlynek, F. Monaco, C. Moon, F. Nabais, A. Nemes-Czopf, G. Neu, R. Neu, A.H. Nielsen, S.K. Nielsen, V. Nikolaeva, M. Nocente, J.-M. Noterdaeme, I. Novikau, S. Nowak, M. Oberkofler, M. Oberparleiter, R. Ochoukov, T. Odstrcil, J. Olsen, F. Orain, F. Palermo, O. Pan, G. Papp, I. Paradela Perez, A. Pau, G. Pautasso, F. Penzel, P. Petersson, J. Pinzón Acosta, P. Piovesan, C. Piron, R. Pitts, U. Plank, B. Plaum, B. Ploeckl, V. Plyusnin, G. Pokol, E. Poli, L. Porte, S. Potzel, D. Prisiazhniuk, T. Pütterich, M. Ramisch, J. Rasmussen, G.A. Rattá, S. Ratynskaia, G. Raupp, G.L. Ravera, D. Réfy, M. Reich, F. Reimold, D. Reiser, T. Ribeiro, J. Riesch, R. Riedl, D. Rittich, J.F. Rivero-Rodriguez, G. Rocchi, M. Rodriguez-Ramos, V. Rohde, A. Ross1, M. Rott, M. Rubel, D. Ryan, F. Ryter, S. Saarelma, M. Salewski, A. Salmi, L. Sanchis-Sanchez, J. Santos, O. Sauter, A. Scarabosio, G. Schall, K. Schmid, O. Schmitz, P.A. Schneider, R. Schrittwieser, M. Schubert, T. Schwarz-Selinger, J. Schweinzer, B. Scott, T. Semer, E. Seliunin, M. Sertoli, A. Shabbir, A. Shalpegin, L. Shao, S. Sharapov, G. Sias, M. Siccinio, B. Sieglin, A. Sigalov, A. Silva, C. Silva, D. Silvagni, P. Simon, J. Simpson, E. Smigelskis, A. Snicker, C. Sommariva, C. Sozzi, M. Spolaore, A. Stegmeir, M. Stejner, J. Stober, U. Stroth, E. Strumberger, G. Suarez, H.-J. Sun, W. Suttrop, E. Sytova, T. Szepesi, B. Tál, T. Tala, G. Tardini, M. Tardocchi, M. Teschke, D. Terranova, W. Tierens, E. Thorén, D. Told, P. Tolias, O. Tudisco, W. Treutterer, E. Trier, M. Tripský, M. Valisa, M. Valovic, B. Vanovac, D. van Vugt, S. Varoutis, G. Verdoolaege, N. Vianello, J. Vicente, T. Vierle, E. Viezzer, U. von Toussaint, D. Wagner, N. Wang, X. Wang, M. Weiland, A.E. White, S. Wiesen, M. Willensdorfer, B. Wiringer, M. Wischmeier, R. Wolf, E. Wolfrum, L. Xiang, Q. Yang, Z. Yang, Q. Yu, R. Zagórski, I. Zammuto, W. Zhang, M. van Zeeland, T. Zehetbauer, M. Zilker, S. Zoletnik, H. Zohm and the EUROfusion MST1 Team55
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Electromagnetic turbulence suppression by energetic particle driven modes

  • Siena, Alessandro di
  • Görler, Tobias
  • Bañon Navarro, Alejandro
  • Biancalani, Alessandro
  • Bilato, Roberto
  • Mantsinen, Mervi J.
  • Oliveira Lopes, Felipe Nathan de
  • Jenko, Frank
In recent years, a strong reduction of plasma turbulence in the presence of energetic particles has been reported in a number of magnetic confinement experiments and corresponding gyrokinetic simulations. While highly relevant to performance predictions for burning plasmas, an explanation for this primarily nonlinear effect has so far remained elusive. A thorough analysis finds that linearly marginally stable energetic particle driven modes are excited nonlinearly, depleting the energy content of the turbulence and acting as an additional catalyst for energy transfer to zonal modes (the dominant turbulence saturation channel). Respective signatures are found in a number of simulations for different JET and ASDEX Upgrade discharges with reduced transport levels attributed to energetic ion effects., The simulations presented in this work were performed at the Cobra HPC system at the Max Planck Computing and Data Facility (MPCDF), Germany. This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014-2018 and 2019-2020 under grant agreement No. 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission. Furthermore, we acknowledge the CINECA award under the ISCRA initiative, for the availability of high performance computing resources and support. The authors would like to thank N. Bonanomi, J. Citrin, H. Doerk, Ph. Lauber, P. Manas, P. Mantica, M.J. Pueschel, K. Stimmel, P.W. Terry, D. Zarzoso, and A. Zocco for all the stimulating discussions, useful suggestions and comments., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Nonlinear electromagnetic stabilization of ITG microturbulence by ICRF-driven fast ions in ASDEX Upgrade

  • de Oliveira, F.N.
  • Doerk, H.
  • Mantsinen, Mervi J.
  • Angioni, C.
  • Bilato, R.
  • Bobkov, V.
  • Dunne, M.
  • Gallart, D.
  • Gutiérrez-Milla, A.
  • Mantica, P.
  • Odstrcil, T.
  • Tardini, G.
  • Sáez, Xavier
  • ASDEX Upgrade Team
  • EUROfusion MST1 Team
Electromagnetic waves in the range of Ion Cyclotron Resonance Frequencies (ICRF) have many applications in fusion devices. While their use for external heating of magnetically confined fusion plasmas is well established, their effects on the enhancement of the plasma confinement by microturbulence stabilization have only been recently discovered [1,2]. For this effect a key parameter of merit is α=−q2βR∇P/P where R is the tokamak major radius, β is the plasma beta, q is the safety factor and P is the plasma pressure. By increasing a local plasma pressure gradient and/or beta by ICRF-accelerated resonant ions, we can decrease turbulent transport driven by microinstabilities. We investigate the impact of ICRF-accelerated fast ions in the stabilization of microturbulence in two ASDEX Upgrade H-mode discharges [3]. In these discharges, in addition to 4.5 MW of deuterium NBI, 3.5 MW of ICRF power was applied at a frequency of 30 MHz tuned to a centrally located 3He minority resonance. The location of the 3He minority resonance was varied by about 10 cm by changing the toroidal magnetic field from 2.8 T in discharge 31562 to 3 T in discharge 31563. The plasma current was 0.6 MA and the main ion species was deuterium. An increase of up to 80% in the central ion temperature was measured, from 3 keV to 5.5 keV, as compared to the reference discharge 31555 with NBI heating only (c.f. Fig. 1). The normalized logarithmic ion temperature gradient, R/LTi, reached a high value of about 20, corresponding to a radial gradient of the Ti profile of about 50 keV/m. The 3He ion density is below 5% of the electron density in all discharges. Thus, the possible effect of main ion dilution [4] on microturbulence stabilization is not expected to be significant., This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014-2018 under the grant agreement No 633053. The views and opinion expressed herein do not necessarily reflect those of the European Commission. We would also like to thank Red Española de Supercomputación (RES) for the resources granted, as well as the CINECA resources granted through the MARCONI-Fusion project., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Supercritical CO2 Brayton power cycles for DEMO (demonstration power plant) fusion reactor based on dual coolant lithium lead blanket

  • Linares, José Ignacio
  • Cantizano González, Alexis
  • Moratilla, Beatriz Y.
  • Martin Palacios, Victor
  • Batet Miracle, Lluís|||0000-0003-1882-6313
The purpose of this website is to provide information about fusion and fusion research, particularly the research activities related to EUROfusion. Neither EUROfusion, the EUROfusion Research Units, the European Commission, nor anyone acting on their behalf, is responsible for any damage resulting from the use of information contained on this website. Unless otherwise explicitly stated, all information, text and electronic images contained on this website are the intellectual property of EUROfusion. You may reproduce and publish EUROfusion’s material for non-commercial, scientific, news and educational purposes provided that you acknowledge EUROfusion as the source. In crediting EUROfusion you may optionally provide a link to our website: www.euro-fusion.org. The material must not be used to state or imply the endorsement by EUROfusion(or by any EUROfusion employee) of a commercial product, process or service, or used in any other manner which might mislead., This paper presents an exploratory analysis of the suitability of supercritical CO2 Brayton power cycles as alternative energy conversion systems for a future fusion reactor based on a DCLL (dual coolant lithium-lead) blanket, as prescribed by EUROfusion. The main issue dealt is the optimization of the integration of the different thermal sources with the power cycle in order to achieve the highest electricity production. The analysis includes the assessment of the pumping consumption in the heating and cooling loops, taking into account additional considerations as control issues and integration of thermal energy storage systems. An exergy analysis has been performed in order to understand the behavior of each layout.Up to ten scenarios have been analyzed assessing different locations for thermal sources heat exchangers. Neglecting the worst four scenarios, it is observed less than 2% of variation among the other six ones. One of the best six scenarios clearly stands out over the others due to the location of the thermal sources in a unique island, being this scenario compatible with the control criteria. In this proposal 34.6% of electric efficiency (before the self-consumptions of the reactor but including pumping consumptions and generator efficiency) is achieved.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Dual sightline measurements of MeV range deuterons with neutron and gamma-ray spectroscopy at JET

  • Eriksson, Johan
  • Scopus - Author details - Nocente, Massimo
  • Binda, Federico
  • Scopus - Author details - Cazzaniga, Carlo
  • Conroy, Sean W.
  • Ericsson, Göran N.
  • Giacomelli, Luca C.
  • Gorini, Giuseppe
  • Hellesen, Carl
  • Hellsten, Törbjrn
  • Hjalmarsson, Anders
  • Jacobsen, Arnhild S.
  • Johnson, Thomas
  • Kiptily, Vasily
  • Koskela, Tuomas
  • Mantsinen, Mervi
  • Salewski, Mirko
  • Schneider, Michael
  • Sharapov, Sergei
  • Skiba, Mateusz
  • Tardocchi, Marco
  • Weiszflog, Matthias
Observations made in a JET experiment aimed at accelerating deuterons to the MeV range by third harmonic radio-frequency (RF) heating coupled into a deuterium beam are reported. Measurements are based on a set of advanced neutron and gamma-ray spectrometers that, for the first time, observe the plasma simultaneously along vertical and oblique lines of sight. Parameters of the fast ion energy distribution, such as the high energy cut-off of the deuteron distribution function and the RF coupling constant, are determined from data within a uniform analysis framework for neutron and gamma-ray spectroscopy based on a one-dimensional model and by a consistency check among the individual measurement techniques. A systematic difference is seen between the two lines of sight and is interpreted to originate from the sensitivity of the oblique detectors to the pitch-angle structure of the distribution around the resonance, which is not correctly portrayed within the adopted one dimensional model. A framework to calculate neutron and gamma-ray emission from a spatially resolved, two-dimensional deuteron distribution specified by energy/pitch is thus developed and used for a first comparison with predictions from ab initio models of RF heating at multiple harmonics. The results presented in this paper are of relevance for the development of advanced diagnostic techniques for MeV range ions in high performance fusion plasmas, with applications to the experimental validation of RF heating codes and, more generally, to studies of the energy distribution of ions in the MeV range in high performance deuterium and deuterium-tritium plasmas., This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014-2018 under grant agreement No 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Challenges in the extrapolation from DD to DT plasmas: experimental analysis and theory based predictions for JET-DT

  • Garcia, J.
  • Challis, C.
  • Gallart, D.
  • Garzotti, L.
  • Görler, T.
  • King, D.
  • Mantsinen, Mervi
  • Jet Contributors
A strong modelling program has been started in support of the future JET-DT campaign with the aim of guiding experiments in deuterium (D) towards maximizing fusion energy production in Deuterium–Tritium (DT). Some of the key elements have been identified by using several of the most updated and sophisticated models for predicting heat and particle transport, pedestal pressure and heating sources in an integrated modelling framework. For the high beta and low gas operational regime, the density plays a critical role and a trend towards higher fusion power is obtained at lower densities. Additionally, turbulence stabilization by E  ×  B flow shear is shown to generate an isotope effect leading to higher confinement for DT than DD and therefore plasmas with high torque are suitable for maximizing fusion performance. Future JET campaigns will benefit from this modelling activity by defining clear priorities on their scientific program., This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014–2018 under grant agreement No 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Recent EUROfusion Achievements in Support of Computationally Demanding Multiscale Fusion Physics Simulations and Integrated Modeling

  • Voitsekhovitch, I.
  • Hatzky, R.
  • Coster, D.
  • Imbeaux, F.
  • McDonald, D.C.
  • Fehér, T.B.
  • Kang, K.S.
  • Leggate, H.
  • Martone, M.
  • Mochalskyy, S.
  • Sáez, Xavier
  • Ribeiro, T.
  • Tran, T.-M-
  • Gutierrez-Milla, A.
  • Aniel, T.
  • Figat, D.
  • Fleury, L.
  • Hoenen, O.
  • Hollocombe, J.
  • Kaljun, D.
  • Manduchi, G.
  • Owsiak, M.
  • Pais, V.
  • Palak, B.
  • Plociennik, M.
  • Signoret, J.
  • Vouland, C.
  • Yadykin, D.
  • Robin, F.
  • Iannone, F.
  • Bracco, G.
  • David, J.
  • Maslennikov, A.
  • Noé, J.
  • Rossi, E.
  • Kamendje, R.
  • Heuraux, S.
  • Hölzl, M.
  • Pinches, S.D.
  • da Silva, F.
  • Tskhakaya, D.
Integrated modeling (IM) of present experiments and future tokamak reactors requires the provision of computational resources and numerical tools capable of simulating multiscale spatial phenomena as well as fast transient events and relatively slow plasma evolution within a reasonably short computational time. Recent progress in the implementation of the new computational resources for fusion applications in Europe based on modern supercomputer technologies (supercomputer MARCONI-FUSION), in the optimization and speedup of the EU fusion-related first-principle codes, and in the development of a basis for physics codes/modules integration into a centrally maintained suite of IM tools achieved within the EUROfusion Consortium is presented. Physics phenomena that can now be reasonably modelled in various areas (core turbulence and magnetic reconnection, edge and scrape-off layer physics, radio-frequency heating and current drive, magnetohydrodynamic model, reflectometry simulations) following successful code optimizations and parallelization are briefly described. Development activities in support to IM are summarized. They include support to (1) the local deployment of the IM infrastructure and access to experimental data at various host sites, (2) the management of releases for sophisticated IM workflows involving a large number of components, and (3) the performance optimization of complex IM workflows., This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014 to 2018 under grant agreement 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission or ITER., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Modelling third harmonic ion cyclotron acceleration of deuterium beams for JET fusion product studies experiments

  • Schneider, M.
  • Johnson, T.
  • Dumont, R.
  • Eriksson, L.-G.
  • Giacomelli, L.
  • Girardo, J.-B.
  • Hellsten, T.
  • Khilkevitch, E.
  • Kiptily, V.G.
  • Koskela, T.
  • Mantsinen, M.
  • Nocente, M.
  • Salewski, M.
  • Sharapov, S.E.
  • Shevelev, A.E.
  • Jet Contributors
Recent JET experiments have been dedicated to the studies of fusion reactions between deuterium (D) and Helium-3 (3He) ions using neutral beam injection (NBI) in synergy with third harmonic ion cyclotron radio-frequency heating (ICRH) of the beam. This scenario generates a fast ion deuterium tail enhancing DD and D3He fusion reactions. Modelling and measuring the fast deuterium tail accurately is essential for quantifying the fusion products. This paper presents the modelling of the D distribution function resulting from the NBI+ICRF heating scheme, reinforced by a comparison with dedicated JET fast ion diagnostics, showing an overall good agreement. Finally, a sawtooth activity for these experiments has been observed and interpreted using SPOT/RFOF simulations in the framework of Porcelli's theoretical model, where NBI+ICRH accelerated ions are found to have a strong stabilizing effect, leading to monster sawteeth., This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014-2018 under grant agreement No 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Effect of inclusion of pitch-angle dependence on a simplified model of RF deposition in tokamak plasma

  • Taylor, David
  • Mantsinen, Mervi J.
  • Gallart Escolà, Dani
  • Manyer Fuertes, Jordi|||0000-0002-0178-3890
  • Sirén, P.
  • JET Contributors
Using the PION ICRH modelling code and comparisons against JET tokamak experiments, the effect of including pitch angle dependence within the RF diffusion operator on the fast ion particle distribution functions is quantified. It is found to be of greatest importance in cases of higher harmonic heating and lower heating ion mass, resulting in faster drop-off of the distribution's high energy tail. We see differences of several orders of magnitude in the high-energy range and significant non-linear alterations by several tens of percent to ion species power partition. ITER scenario operational parameters are also considered, and this improved treatment is shown to benefit anticipated ITER scenarios with second harmonic hydrogen heating, according to our predictions. PION's combination of benchmarked simplified wave physics and Fokker-Planck treatment offers modelling advantages. Since including the pitch angle dependence in the RF diffusion operator has not led to a significant increase in the required computing time when modelling different ICRF schemes in JET discharges, it has been made available within the production code., The CCFE part of this work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014–2018 and 2019–2020 under Grant Agreement No. 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission. The BSC part of this project is co-financed by the European Union Regional Development Fund within the framework of the ERDF Operational Program of Catalonia 2014–2020 with a grant of 50% of total cost eligible. The authors are grateful to Jacob Eriksson for assistance with experimental data, to Lars-Göran Eriksson for discussions on the implementation of the new features, and to Colin Roach and Michael Fitzgerald for valuable comments on the manuscript., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Third harmonic ICRF heating of Deuterium beam ions on ASDEX Upgrade

  • Mantsinen, Mervi
  • Bobkov, Volodymyr
  • Gallart, Daniel|||0000-0003-1663-3550
  • Geiger, Benjamin
  • Johnson, Thomas
  • Meyer, Hendrik
  • Nocente, Massimo
  • Ochoukov, Roman
  • Odstrčil, Tomas
  • Perelli, Enrico
  • Rasmussen, Jens
  • Schneider, P. A.
  • Sharapov, Sergei
  • Tardini, Giovanni
  • Tardocchi, Marco
  • Vallejós, Pablo
  • ASDEX Upgrade
  • EUROfusion MST1
We report on recent experiments on the ASDEX Upgrade (AUG) tokamak (major radius R ≈1.65 m, minor radius a ≈ 0.5 m) with third harmonic ICRF heating of deuterium beam ions. Prior to this work, the scheme has been developed and applied on the JET tokamak, the largest currently operating tokamak (R ≈ 3 m, a ≈ 1 m), for fusion product studies and for testing alpha particle diagnostics in preparation of ITER [1]. The experiments reported here demonstrate that this scheme can also be used in medium size tokamaks such as AUG despite their reduced fast ion confinement., This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014-2018 under grant agreement No 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Overview of ASDEX Upgrade results

  • ASDEX Upgrade Team
  • EUROfusion MST1 Team
  • Mantsinen, Mervi
The ASDEX Upgrade (AUG) programme is directed towards physics input to critical elements of the ITER design and the preparation of ITER operation, as well as addressing physics issues for a future DEMO design. Since 2015, AUG is equipped with a new pair of 3-strap ICRF antennas, which were designed for a reduction of tungsten release during ICRF operation. As predicted, a factor two reduction on the ICRF-induced W plasma content could be achieved by the reduction of the sheath voltage at the antenna limiters via the compensation of the image currents of the central and side straps in the antenna frame. There are two main operational scenario lines in AUG. Experiments with low collisionality, which comprise current drive, ELM mitigation/suppression and fast ion physics, are mainly done with freshly boronized walls to reduce the tungsten influx at these high edge temperature conditions. Full ELM suppression and non-inductive operation up to a plasma current of Ip = 0.8 MA could be obtained at low plasma density. Plasma exhaust is studied under conditions of high neutral divertor pressure and separatrix electron density, where a fresh boronization is not required. Substantial progress could be achieved for the understanding of the confinement degradation by strong D puffing and the improvement with nitrogen or carbon seeding. Inward/outward shifts of the electron density profile relative to the temperature profile effect the edge stability via the pressure profile changes and lead to improved/decreased pedestal performance. Seeding and D gas puffing are found to effect the core fueling via changes in a region of high density on the high field side (HFSHD). The integration of all above mentioned operational scenarios will be feasible and naturally obtained in a large device where the edge is more opaque for neutrals and higher plasma temperatures provide a lower collisionality. The combination of exhaust control with pellet fueling has been successfully demonstrated. High divertor enrichment values of nitrogen En > 10 have been obtained during pellet injection, which is a prerequisite for the simultaneous achievement of good core plasma purity and high divertor radiation levels. Impurity accumulation observed in the all-metal AUG device caused by the strong neoclassical inward transport of tungsten in the pedestal is expected to be relieved by the higher neoclassical temperature screening in larger devices., This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014-2018 under grant agreement number 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Bulk ion heating with ICRF waves in tokamaks

  • Mantsinen, Mervi
  • Bilato, Roberto
  • Bobkov, Volodymyr
  • Kappatou, Athina
  • McDermott, Rachel
  • Nocente, Massimo
  • Odstrcil, Tomas
  • Tardini, Giovanni
  • Bernert, Matthias
  • Dux, Ralph
  • Hellsten, Torbjörn
  • Mantica, Paola
  • Maraschek, Marc
  • Nielsen, Stefan K.
  • Noterdaeme, Jean-Marie
  • Rasmussen, Jens
  • Ryter, François
  • Stejner, Morten
  • Stober, Jörg
  • Tardocchi, Marco
  • The ASDEX Upgrade Team and the EUROfusion MST1 Team
Heating with ICRF waves is a well-established method on present-day tokamaks and one of the heating systems foreseen for ITER. However, further work is still needed to test and optimize its performance in fusion devices with metallic high-Z plasma facing components (PFCs) in preparation of ITER and DEMO operation. This is of particular importance for the bulk ion heating capabilities of ICRF waves. Efficient bulk ion heating with the standard ITER ICRF scheme, i.e. the second harmonic heating of tritium with or without 3He minority, was demonstrated in experiments carried out in deuterium-tritium plasmas on JET and TFTR and is confirmed by ICRF modelling. This paper focuses on recent experiments with 3He minority heating for bulk ion heating on the ASDEX Upgrade (AUG) tokamak with ITER-relevant all-tungsten PFCs. An increase of 80% in the central ion temperature Ti from 3 to 5.5 keV was achieved when 3 MW of ICRF power tuned to the central 3He ion cyclotron resonance was added to 4.5 MW of deuterium NBI. The radial gradient of the Ti profile reached locally values up to about 50 keV/m and the normalized logarithmic ion temperature gradients R/LTi of about 20, which are unusually large for AUG plasmas. The large changes in the Ti profiles were accompanied by significant changes in measured plasma toroidal rotation, plasma impurity profiles and MHD activity, which indicate concomitant changes in plasma properties with the application of ICRF waves. When the 3He concentration was increased above the optimum range for bulk ion heating, a weaker peaking of the ion temperature profile was observed, in line with theoretical expectations., This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014-2018 under grant agreement No 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Overview of the JET results in support to ITER

  • Litaudon, Xavier
  • Abduallev, Sadrilla
  • Abhangi, Mitul
  • Abreu, Paulo
  • Afza, M.
  • Aggarwa, K. M.
  • Ahlgren, Tommy
  • Ahn, Jae Heon
  • Aho-Mantila, Leena
  • Aiba, Nobuyuki
  • Futatani, Shimpei|||0000-0001-5742-5454
  • Gallart Escolà, Daniel
  • Mantsinen, Mervi Johanna
  • Rakha, Allah
The 2014–2016 JET results are reviewed in the light of their significance for optimising the ITER research plan for the active and non-active operation. More than 60 h of plasma operation with ITER first wall materials successfully took place since its installation in 2011. New multi-machine scaling of the type I-ELM divertor energy flux density to ITER is supported by first principle modelling. ITER relevant disruption experiments and first principle modelling are reported with a set of three disruption mitigation valves mimicking the ITER setup. Insights of the L–H power threshold in Deuterium and Hydrogen are given, stressing the importance of the magnetic configurations and the recent measurements of fine-scale structures in the edge radial electric. Dimensionless scans of the core and pedestal confinement provide new information to elucidate the importance of the first wall material on the fusion performance. H-mode plasmas at ITER triangularity (H = 1 at ßN ~ 1.8 and n/nGW ~ 0.6) have been sustained at 2 MA during 5 s. The ITER neutronics codes have been validated on high performance experiments. Prospects for the coming D–T campaign and 14 MeV neutron calibration strategy are reviewed., This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014–2018 under grant agreement No 633053., Peer Reviewed, Article signat per 1.173 autors/es: X. Litaudon35, S. Abduallev39, M. Abhangi46, P. Abreu53, M. Afzal7, K.M. Aggarwal29, T. Ahlgren101, J.H. Ahn8, L. Aho-Mantila112, N. Aiba69, M. Airila112, R. Albanese105, V. Aldred7, D. Alegre93, E. Alessi45, P. Aleynikov55, A. Alfier12, A. Alkseev72, M. Allinson7, B. Alper7, E. Alves53, G. Ambrosino105, R. Ambrosino106, L. Amicucci90, V. Amosov88, E. Andersson Sundén22, M. Angelone90, M. Anghel85, C. Angioni62, L. Appel7, C. Appelbee7, P. Arena30, M. Ariola106, H. Arnichand8, S. Arshad41, A. Ash7, N. Ashikawa68, V. Aslanyan64, O. Asunta1, F. Auriemma12, Y. Austin7, L. Avotina103, M.D. Axton7, C. Ayres7, M. Bacharis24, A. Baciero57, D. Baião53, S. Bailey7, A. Baker7, I. Balboa7, M. Balden62, N. Balshaw7, R. Bament7, J.W. Banks7, Y.F. Baranov7, M.A. Barnard7, D. Barnes7, M. Barnes27, R. Barnsley55, A. Baron Wiechec7, L. Barrera Orte34, M. Baruzzo12, V. Basiuk8, M. Bassan55, R. Bastow7, A. Batista53, P. Batistoni90, R. Baughan7, B. Bauvir55, L. Baylor73, B. Bazylev56, J. Beal110, P.S. Beaumont7, M. Beckers39, B. Beckett7, A. Becoulet8, N. Bekris35, M. Beldishevski7, K. Bell7, F. Belli90, M. Bellinger7, É. Belonohy62, N. Ben Ayed7, N.A. Benterman7, H. Bergsåker42, J. Bernardo53, M. Bernert62, M. Berry7, L. Bertalot55, C. Besliu7, M. Beurskens63, B. Bieg61, J. Bielecki47, T. Biewer73, M. Bigi12, P. Bílková50, F. Binda22, A. Bisoffi31, J.P.S. Bizarro53, C. Björkas101, J. Blackburn7, K. Blackman7, T.R. Blackman7, P. Blanchard33, P. Blatchford7, V. Bobkov62, A. Boboc7, G. Bodnár113, O. Bogar18, I. Bolshakova60, T. Bolzonella12, N. Bonanomi97, F. Bonelli56, J. Boom62, J. Booth7, D. Borba35,53, D. Borodin39, I. Borodkina39, A. Botrugno90, C. Bottereau8, P. Boulting7, C. Bourdelle8, M. Bowden7, C. Bower7, C. Bowman110, T. Boyce7, C. Boyd7, H.J. Boyer7, J.M.A. Bradshaw7, V. Braic87, R. Bravanec40, B. Breizman107, S. Bremond8, P.D. Brennan7, S. Breton8, A. Brett7, S. Brezinsek39, M.D.J. Bright7, M. Brix7, W. Broeckx78, M. Brombin12, A. Brosławski65, D.P.D. Brown7, M. Brown7, E. Bruno55, J. Bucalossi8, J. Buch46, J. Buchanan7, M.A. Buckley7, R. Budny76, H. Bufferand8, M. Bulman7, N. Bulmer7, P. Bunting7, P. Buratti90, A. Burckhart62, A. Buscarino30, A. Busse7, N.K. Butler7, I. Bykov42, J. Byrne7, P. Cahyna50, G. Calabrò90, I. Calvo57, Y. Camenen4, P. Camp7, D.C. Campling7, J. Cane7, B. Cannas17, A.J. Capel7, P.J. Card7, A. Cardinali90, P. Carman7, M. Carr7, D. Carralero62, L. Carraro12, B.B. Carvalho53, I. Carvalho53, P. Carvalho53, F.J. Casson7, C. Castaldo90, N. Catarino53, J. Caumont7, F. Causa90, R. Cavazzana12, K. Cave-Ayland7, M. Cavinato12, M. Cecconello22, S. Ceccuzzi90, E. Cecil76, A. Cenedese12, R. Cesario90, C.D. Challis7, M. Chandler7, D. Chandra46, C.S. Chang76, A. Chankin62, I.T. Chapman7, S.C. Chapman28, M. Chernyshova49, G. Chitarin12, G. Ciraolo8, D. Ciric7, J. Citrin38, F. Clairet8, E. Clark7, M. Clark7, R. Clarkson7, D. Clatworthy7, C. Clements7, M. Cleverly7, J.P. Coad7, P.A. Coates7, A. Cobalt7, V. Coccorese105, V. Cocilovo90, S. Coda33, R. Coelho53, J.W. Coenen39, I. Coffey29, L. Colas8, S. Collins7, D. Conka103, S. Conroy22, N. Conway7, D. Coombs7, D. Cooper7, S.R. Cooper7, C. Corradino30, Y. Corre8, G. Corrigan7, S. Cortes53, D. Coster62, A.S. Couchman7, M.P. Cox7, T. Craciunescu86, S. Cramp7, R. Craven7, F. Crisanti90, G. Croci97, D. Croft7, K. Crombé15, R. Crowe7, N. Cruz53, G. Cseh113, A. Cufar81, A. Cullen7, M. Curuia85, A. Czarnecka49, H. Dabirikhah7, P. Dalgliesh7, S. Dalley7, J. Dankowski47, D. Darrow76, O. Davies7, W. Davis55,76, C. Day56, I.E. Day7, M. De Bock55, A. de Castro57, E. de la Cal57, E. de la Luna57, G. De Masi12, J. L. de Pablos57, G. De Temmerman55, G. De Tommasi105, P. de Vries55, K. Deakin7, J. Deane7, F. Degli Agostini12, R. Dejarnac50, E. Delabie73, N. den Harder38, R.O. Dendy7, J. Denis8, P. Denner39, S. Devaux62,104, P. Devynck8, F. Di Maio55, A. Di Siena62, C. Di Troia90, P. Dinca86, R. D’Inca62, B. Ding51, T. Dittmar39, H. Doerk62, R.P. Doerner9, T. Donné34, S.E. Dorling7, S. Dormido-Canto93, S. Doswon7, D. Douai8, P.T. Doyle7, A. Drenik62,81, P. Drewelow63, P. Drews39, Ph. Duckworth55, R. Dumont8, P. Dumortier58, D. Dunai113, M. Dunne62, I. Ďuran50, F. Durodié58, P. Dutta46, B. P. Duval33, R. Dux62, K. Dylst78, N. Dzysiuk22, P.V. Edappala46, J. Edmond7, A.M. Edwards7, J. Edwards7, Th. Eich62, A. Ekedahl8, R. El-Jorf7, C.G. Elsmore7, M. Enachescu84, G. Ericsson22, F. Eriksson16, J. Eriksson22, L.G. Eriksson36, B. Esposito90, S. Esquembri94, H.G. Esser39, D. Esteve8, B. Evans7, G.E. Evans7, G. Evison7, G.D. Ewart7, D. Fagan7, M. Faitsch62, D. Falie86, A. Fanni17, A. Fasoli33, J. M. Faustin33, N. Fawlk7, L. Fazendeiro53, N. Fedorczak8, R.C. Felton7, K. Fenton7, A. Fernades53, H. Fernandes53, J. Ferreira53, J.A. Fessey7, O. Février8, O. Ficker50, A. Field7, S. Fietz62, A. Figueiredo53, J. Figueiredo53,35, A. Fil8, P. Finburg7, M. Firdaouss8, U. Fischer56, L. Fittill7, M. Fitzgerald7, D. Flammini90, J. Flanagan7, C. Fleming7, K. Flinders7, N. Fonnesu90, J. M. Fontdecaba57, A. Formisano79, L. Forsythe7, L. Fortuna30, E. Fortuna-Zalesna19, M. Fortune7, S. Foster7, T. Franke34, T. Franklin7, M. Frasca30, L. Frassinetti42, M. Freisinger39, R. Fresa98, D. Frigione90, V. Fuchs50, D. Fuller35, S. Futatani6, J. Fyvie7, K. Gál34,62, D. Galassi2, K. Gałązka49, J. Galdon-Quiroga92, J. Gallagher7, D. Gallart6, R. Galvão10, X. Gao51, Y. Gao39, J. Garcia8, A. Garcia-Carrasco42, M. García-Muñoz92, J.-L. Gardarein3, L. Garzotti7, P. Gaudio95, E. Gauthier8, D.F. Gear7, S.J. Gee7, B. Geiger62, M. Gelfusa95, S. Gerasimov7, G. Gervasini45, M. Gethins7, Z. Ghani7, M. Ghate46, M. Gherendi86, J.C. Giacalone8, L. Giacomelli45, C.S. Gibson7, T. Giegerich56, C. Gil8, L. Gil53, S. Gilligan7, D. Gin54, E. Giovannozzi90, J.B. Girardo8, C. Giroud7, G. Giruzzi8, S. Glöggler62, J. Godwin7, J. Goff7, P. Gohil43, V. Goloborod’ko102, R. Gomes53, B. Gonçalves53, M. Goniche8, M. Goodliffe7, A. Goodyear7, G. Gorini97, M. Gosk65, R. Goulding76, A. Goussarov78, R. Gowland7, B. Graham7, M.E. Graham7, J. P. Graves33, N. Grazier7, P. Grazier7, N.R. Green7, H. Greuner62, B. Grierson76, F.S. Griph7, C. Grisolia8, D. Grist7, M. Groth1, R. Grove73, C.N. Grundy7, J. Grzonka19, D. Guard7, C. Guérard34, C. Guillemaut8,53, R. Guirlet8, C. Gurl7, H.H. Utoh69, L.J. Hackett7, S. Hacquin8,35, A. Hagar7, R. Hager76, A. Hakola112, M. Halitovs103, S.J. Hall7, S.P. Hallworth Cook7, C. Hamlyn-Harris7, K. Hammond7, C. Harrington7, J. Harrison7, D. Harting7, F. Hasenbeck39, Y. Hatano108, D.R. Hatch107, T.D.V. Haupt7, J. Hawes7, N.C. Hawkes7, J. Hawkins7, P. Hawkins7, P.W. Haydon7, N. Hayter7, S. Hazel7, P.J.L. Heesterman7, K. Heinola101, C. Hellesen22, T. Hellsten42, W. Helou8, O.N. Hemming7, T.C. Hender7, M. Henderson55, S.S. Henderson21, R. Henriques53, D. Hepple7, G. Hermon7, P. Hertout8, C. Hidalgo57, E.G. Highcock27, M. Hill7, J. Hillairet8, J. Hillesheim7, D. Hillis73, K. Hizanidis70, A. Hjalmarsson22, J. Hobirk62, E. Hodille8, C.H.A. Hogben7, G.M.D. Hogeweij38, A. Hollingsworth7, S. Hollis7, D.A. Homfray7, J. Horáček50, G. Hornung15, A.R. Horton7, L.D. Horton36, L. Horvath110, S.P. Hotchin7, M.R. Hough7, P.J. Howarth7, A. Hubbard64, A. Huber39, V. Huber39, T.M. Huddleston7, M. Hughes7, G.T.A. Huijsmans55, C.L. Hunter7, P. Huynh8, A.M. Hynes7, D. Iglesias7, N. Imazawa69, F. Imbeaux8, M. Imríšek50, M. Incelli109, P. Innocente12, M. Irishkin8, I. Ivanova-Stanik49, S. Jachmich58,35, A.S. Jacobsen83, P. Jacquet7, J. Jansons103, A. Jardin8, A. Järvinen1, F. Jaulmes38, S. Jednoróg49, I. Jenkins7, C. Jeong20, I. Jepu86, E. Joffrin8, R. Johnson7, T. Johnson42, Jane Johnston7, L. Joita7, G. Jones7, T.T.C. Jones7, K.K. Hoshino69, A. Kallenbach62, K. Kamiya69, J. Kaniewski7, A. Kantor7, A. Kappatou62, J. Karhunen1, D. Karkinsky7, I. Karnowska7, M. Kaufman73, G. Kaveney7, Y. Kazakov58, V. Kazantzidis70, D.L. Keeling7, T. Keenan7, J. Keep7, M. Kempenaars7, C. Kennedy7, D. Kenny7, J. Kent7, O.N. Kent7, E. Khilkevich54, H.T. Kim35, H.S. Kim80, A. Kinch7, C. king7, D. King7, R.F. King7, D.J. Kinna7, V. Kiptily7, A. Kirk7, K. Kirov7, A. Kirschner39, G. Kizane103, C. Klepper73, A. Klix56, P. Knight7, S.J. Knipe7, S. Knott96, T. Kobuchi69, F. Köchl111, G. Kocsis113, I. Kodeli81, L. Kogan7, D. Kogut8, S. Koivuranta112, Y. Kominis70, M. Köppen39, B. Kos81, T. Koskela1, H.R. Koslowski39, M. Koubiti4, M. Kovari7, E. Kowalska-Strzęciwilk49, A. Krasilnikov88, V. Krasilnikov88, N. Krawczyk49, M. Kresina8, K. Krieger62, A. Krivska58, U. Kruezi7, I. Książek48, A. Kukushkin72, A. Kundu46, T. Kurki-Suonio1, S. Kwak20, R. Kwiatkowski65, O.J. Kwon13, L. Laguardia45, A. Lahtinen101, A. Laing7, N. Lam7, H.T. Lambertz39, C. Lane7, P.T. Lang62, S. Lanthaler33, J. Lapins103, A. Lasa101, J.R. Last7, E. Łaszyńska49, R. Lawless7, A. Lawson7, K.D. Lawson7, A. Lazaros70, E. Lazzaro45, J. Leddy110, S. Lee66, X. Lefebvre7, H.J. Leggate32, J. Lehmann7, M. Lehnen55, D. Leichtle41, P. Leichuer7, F. Leipold55,83, I. Lengar81, M. Lennholm36, E. Lerche58, A. Lescinskis103, S. Lesnoj7, E. Letellier7, M. Leyland110, W. Leysen78, L. Li39, Y. Liang39, J. Likonen112, J. Linke39, Ch. Linsmeier39, B. Lipschultz110, G. Liu55, Y. Liu51, V.P. Lo Schiavo105, T. Loarer8, A. Loarte55, R.C. Lobel7, B. Lomanowski1, P.J. Lomas7, J. Lönnroth1,35, J. M. López94, J. López-Razola57, R. Lorenzini12, U. Losada57, J.J. Lovell7, A.B. Loving7, C. Lowry36, T. Luce43, R.M.A. Lucock7, A. Lukin74, C. Luna5, M. Lungaroni95, C.P. Lungu86, M. Lungu86, A. Lunniss110, I. Lupelli7, A. Lyssoivan58, N. Macdonald7, P. Macheta7, K. Maczewa7, B. Magesh46, P. Maget8, C. Maggi7, H. Maier62, J. Mailloux7, T. Makkonen1, R. Makwana46, A. Malaquias53, A. Malizia95, P. Manas4, A. Manning7, M.E. Manso53, P. Mantica45, M. Mantsinen6, A. Manzanares91, Ph. Maquet55, Y. Marandet4, N. Marcenko88, C. Marchetto45, O. Marchuk39, M. Marinelli95, M. Marinucci90, T. Markovič50, D. Marocco90, L. Marot26, C.A. Marren7, R. Marshal7, A. Martin7, Y. Martin33, A. Martín de Aguilera57, F.J. Martínez93, J. R. Martín-Solís14, Y. Martynova39, S. Maruyama55, A. Masiello12, M. Maslov7, S. Matejcik18, M. Mattei79, G.F. Matthews7, F. Maviglia11, M. Mayer62, M.L. Mayoral34, T. May-Smith7, D. Mazon8, C. Mazzotta90, R. McAdams7, P.J. McCarthy96, K.G. McClements7, O. McCormack12, P.A. McCullen7, D. McDonald34, S. McIntosh7, R. McKean7, J. McKehon7, R.C. Meadows7, A. Meakins7, F. Medina57, M. Medland7, S. Medley7, S. Meigh7, A.G. Meigs7, G. Meisl62, S. Meitner73, L. Meneses53, S. Menmuir7,42, K. Mergia71, I.R. Merrigan7, Ph. Mertens39, S. Meshchaninov88, A. Messiaen58, H. Meyer7, S. Mianowski65, R. Michling55, D. Middleton-Gear7, J. Miettunen1, F. Militello7, E. Militello-Asp7, G. Miloshevsky77, F. Mink62, S. Minucci105, Y. Miyoshi69, J. Mlynář50, D. Molina8, I. Monakhov7, M. Moneti109, R. Mooney7, S. Moradi37, S. Mordijck43, L. Moreira7, R. Moreno57, F. Moro90, A.W. Morris7, J. Morris7, L. Moser26, S. Mosher73, D. Moulton7,1, A. Murari12,35, A. Muraro45, S. Murphy7, N.N. Asakura69, Y.S. Na80, F. Nabais53, R. Naish7, T. Nakano69, E. Nardon8, V. Naulin83, M.F.F. Nave53, I. Nedzelski53, G. Nemtsev88, F. Nespoli33, A. Neto41, R. Neu62, V.S. Neverov72, M. Newman7, K.J. Nicholls7, T. Nicolas33, A.H. Nielsen83, P. Nielsen12, E. Nilsson8, D. Nishijima99, C. Noble7, M. Nocente97, D. Nodwell7, K. Nordlund101, H. Nordman16, R. Nouailletas8, I. Nunes53, M. Oberkofler62, T. Odupitan7, M.T. Ogawa69, T. O’Gorman7, M. Okabayashi76, R. Olney7, O. Omolayo7, M. O’Mullane21, J. Ongena58, F. Orsitto11, J. Orszagh18, B.I. Oswuigwe7, R. Otin7, A. Owen7, R. Paccagnella12, N. Pace7, D. Pacella90, L.W. Packer7, A. Page7, E. Pajuste103, S. Palazzo30, S. Pamela7, S. Panja46, P. Papp18, R. Paprok50, V. Parail7, M. Park66, F. Parra Diaz27, M. Parsons73, R. Pasqualotto12, A. Patel7, S. Pathak46, D. Paton7, H. Patten33, A. Pau17, E. Pawelec48, C. Paz Soldan43, A. Peackoc36, I.J. Pearson7, S.-P. Pehkonen112, E. Peluso95, C. Penot55, A. Pereira57, R. Pereira53, P.P. Pereira Puglia7, C. Perez von Thun35,39, S. Peruzzo12, S. Peschanyi56, M. Peterka50, P. Petersson42, G. Petravich113, A. Petre84, N. Petrella7, V. Petržilka50, Y. Peysson8, D. Pfefferlé33, V. Philipps39, M. Pillon90, G. Pintsuk39, P. Piovesan12, A. Pires dos Reis52, L. Piron7, A. Pironti105, F. Pisano17, R. Pitts55, F. Pizzo79, V. Plyusnin53, N. Pomaro12, O.G. Pompilian86, P.J. Pool7, S. Popovichev7, M.T. Porfiri90, C. Porosnicu86, M. Porton7, G. Possnert22, S. Potzel62, T. Powell7, J. Pozzi7, V. Prajapati46, R. Prakash46, G. Prestopino95, D. Price7, M. Price7, R. Price7, P. Prior7, R. Proudfoot7, G. Pucella90, P. Puglia52, M.E. Puiatti12, D. Pulley7, K. Purahoo7, Th. Pütterich62, E. Rachlew25, M. Rack39, R. Ragona58, M.S.J. Rainford7, A. Rakha6, G. Ramogida90, S. Ranjan46, C.J. Rapson62, J.J. Rasmussen83, K. Rathod46, G. Rattá57, S. Ratynskaia82, G. Ravera90, C. Rayner7, M. Rebai97, D. Reece7, A. Reed7, D. Réfy113, B. Regan7, J. Regaña34, M. Reich62, N. Reid7, F. Reimold39, M. Reinhart34, M. Reinke110,73, D. Reiser39, D. Rendell7, C. Reux8, S.D.A. Reyes Cortes53, S. Reynolds7, V. Riccardo7, N. Richardson7, K. Riddle7, D. Rigamonti97, F.G. Rimini7, J. Risner73, M. Riva90, C. Roach7, R.J. Robins7, S.A. Robinson7, T. Robinson7, D.W. Robson7, R. Roccella55, R. Rodionov88, P. Rodrigues53, J. Rodriguez7, V. Rohde62, F. Romanelli90, M. Romanelli7, S. Romanelli7, J. Romazanov39, S. Rowe7, M. Rubel42, G. Rubinacci105, G. Rubino12, L. Ruchko52, M. Ruiz94, C. Ruset86, J. Rzadkiewicz65, S. Saarelma7, R. Sabot8, E. Safi101, P. Sagar7, G. Saibene41, F. Saint-Laurent8, M. Salewski83, A. Salmi112, R. Salmon7, F. Salzedas53, D. Samaddar7, U. Samm39, D. Sandiford7, P. Santa46, M.I.K. Santala1, B. Santos53, A. Santucci90, F. Sartori41, R. Sartori41, O. Sauter33, R. Scannell7, T. Schlummer39, K. Schmid62, V. Schmidt12, S. Schmuck7, M. Schneider8, K. Schöpf102, D. Schwörer32, S.D. Scott76, G. Sergienko39, M. Sertoli62, A. Shabbir15, S.E. Sharapov7, A. Shaw7, R. Shaw7, H. Sheikh7, A. Shepherd7, A. Shevelev54, A. Shumack38, G. Sias17, M. Sibbald7, B. Sieglin62, S. Silburn7, A. Silva53, C. Silva53, P.A. Simmons7, J. Simpson7, J. Simpson-Hutchinson7, A. Sinha46, S.K. Sipilä1, A.C.C. Sips36, P. Sirén112, A. Sirinelli55, H. Sjöstrand22, M. Skiba22, R. Skilton7, K. Slabkowska49, B. Slade7, N. Smith7, P.G. Smith7, R. Smith7, T.J. Smith7, M. Smithies110, L. Snoj81, S. Soare85, E. R. Solano35,57, A. Somers32, C. Sommariva8, P. Sonato12, A. Sopplesa12, J. Sousa53, C. Sozzi45, S. Spagnolo12, T. Spelzini7, F. Spineanu86, G. Stables7, I. Stamatelatos71, M.F. Stamp7, P. Staniec7, G. Stankūnas59, C. Stan-Sion84, M.J. Stead7, E. Stefanikova42, I. Stepanov58, A.V. Stephen7, M. Stephen46, A. Stevens7, B.D. Stevens7, J. Strachan76, P. Strand16, H.R. Strauss44, P. Ström42, G. Stubbs7, W. Studholme7, F. Subba75, H.P. Summers21, J. Svensson63, Ł. Świderski65, T. Szabolics113, M. Szawlowski49, G. Szepesi7, T.T. Suzuki69, B. Tál113, T. Tala112, A.R. Talbot7, S. Talebzadeh95, C. Taliercio12, P. Tamain8, C. Tame7, W. Tang76, M. Tardocchi45, L. Taroni12, D. Taylor7, K.A. Taylor7, D. Tegnered16, G. Telesca15, N. Teplova54, D. Terranova12, D. Testa33, E. Tholerus42, J. Thomas7, J.D. Thomas7, P. Thomas55, A. Thompson7, C.-A. Thompson7, V.K. Thompson7, L. Thorne7, A. Thornton7, A.S. Thrysøe83, P.A. Tigwell7, N. Tipton7, I. Tiseanu86, H. Tojo69, M. Tokitani67, P. Tolias82, M. Tomeš50, P. Tonner7, M. Towndrow7, P. Trimble7, M. Tripsky58, M. Tsalas38, P. Tsavalas71, D. Tskhakaya jun102, I. Turner7, M.M. Turner32, M. Turnyanskiy34, G. Tvalashvili7, S.G.J. Tyrrell7, A. Uccello45, Z. Ul-Abidin7, J. Uljanovs1, D. Ulyatt7, H. Urano69, I. Uytdenhouwen78, A.P. Vadgama7, D. Valcarcel7, M. Valentinuzzi8, M. Valisa12, P. Vallejos Olivares42, M. Valovic7, M. Van De Mortel7, D. Van Eester58, W. Van Renterghem78, G.J. van Rooij38, J. Varje1, S. Varoutis56, S. Vartanian8, K. Vasava46, T. Vasilopoulou71, J. Vega57, G. Verdoolaege58, R. Verhoeven7, C. Verona95, G. Verona Rinati95, E. Veshchev55, N. Vianello45, J. Vicente53, E. Viezzer62,92, S. Villari90, F. Villone100, P. Vincenzi12, I. Vinyar74, B. Viola90, A. Vitins103, Z. Vizvary7, M. Vlad86, I. Voitsekhovitch34, P. Vondráček50, N. Vora7, T. Vu8, W.W. Pires de Sa52, B. Wakeling7, C.W.F. Waldon7, N. Walkden7, M. Walker7, R. Walker7, M. Walsh55, E. Wang39, N. Wang39, S. Warder7, R.J. Warren7, J. Waterhouse7, N.W. Watkins28, C. Watts55, T. Wauters58, A. Weckmann42, J. Weiland23, H. Weisen33, M. Weiszflog22, C. Wellstood7, A.T. West7, M.R. Wheatley7, S. Whetham7, A.M. Whitehead7, B.D. Whitehead7, A.M. Widdowson7, S. Wiesen39, J. Wilkinson7, J. Williams7, M. Williams7, A.R. Wilson7, D.J. Wilson7, H.R. Wilson110, J. Wilson7, M. Wischmeier62, G. Withenshaw7, A. Withycombe7, D.M. Witts7, D. Wood7, R. Wood7, C. Woodley7, S. Wray7, J. Wright7, J.C. Wright64, J. Wu89, S. Wukitch64, A. Wynn110, T. Xu7, D. Yadikin16, W. Yanling39, L. Yao89, V. Yavorskij102, M.G. Yoo80, C. Young7, D. Young7, I.D. Young7, R. Young7, J. Zacks7, R. Zagorski49, F.S. Zaitsev18, R. Zanino75, A. Zarins103, K.D. Zastrow7, M. Zerbini90, W. Zhang62, Y. Zhou42, E. Zilli12, V. Zoita86, S. Zoletnik113, I. Zychor65 and JET Contributorsa // EUROfusion Consortium JET, Culham Science Centre, Abingdon, OX14 3DB, United Kingdom / 1 Aalto University, PO Box 14100, FIN-00076 Aalto, Finland / 2 Aix Marseille Université, CNRS, Centrale Marseille, M2P2 UMR 7340, 13451, Marseille, France / 3 Aix-Marseille Université, CNRS, IUSTI UMR 7343, 13013 Marseille, France / 4 Aix-Marseille Université, CNRS, PIIM, UMR 7345, 13013 Marseille, France / 5 Arizona State University, Tempe, AZ, United States of America / 6 Barcelona Supercomputing Center, Barcelona, Spain / 7 CCFE, Culham Science Centre, Abingdon, Oxon, OX14 3DB, United Kingdom / 8 CEA, IRFM, F-13108 Saint Paul Lez Durance, France / 9 Center for Energy Research, University of California at San Diego, La Jolla, CA 92093, United States of America / 10 Centro Brasileiro de Pesquisas Fisicas, Rua Xavier Sigaud, 160, Rio de Janeiro CEP 22290-180, Brazil / 11 Consorzio CREATE, Via Claudio 21, 80125 Napoli, Italy / 12 Consorzio RFX, corso Stati Uniti 4, 35127 Padova, Italy / 13 Daegu University, Jillyang, Gyeongsan, Gyeongbuk 712-174, Republic of Korea / 14 Departamento de Física, Universidad Carlos III de Madrid, 28911 Leganés, Madrid, Spain / 15 Department of Applied Physics UG (Ghent University) St-Pietersnieuwstraat 41 B-9000 Ghent, Belgium / 16 Department of Earth and Space Sciences, Chalmers University of Technology, SE-41296 Gothenburg, Sweden / 17 Department of Electrical and Electronic Engineering, University of Cagliari, Piazza d’Armi 09123, Cagliari, Italy / 18 Department of Experimental Physics, Faculty of Mathematics, Physics and Informatics Comenius University Mlynska dolina F2, 84248 Bratislava, Slovakia / 19 Department of Materials Science, Warsaw University of Technology, PL-01-152 Warsaw, Poland / 20 Department of Nuclear and Quantum Engineering, KAIST, Daejeon 34141, Korea / 21 Department of Physics and Applied Physics, University of Strathclyde, Glasgow, G4 ONG, United Kingdom / 22 Department of Physics and Astronomy, Uppsala University, SE-75120 Uppsala, Sweden / 23 Department of Physics, Chalmers University of Technology, SE-41296 Gothenburg, Sweden / 24 Department of Physics, Imperial College London, London, SW7 2AZ, United Kingdom / 25 Department of Physics, SCI, KTH, SE-10691 Stockholm, Sweden / 26 Department of Physics, University of Basel, Basel, Switzerland / 27 Department of Physics, University of Oxford, Oxford, OX1 2JD, United Kingdom / 28 Department of Physics, University of Warwick, Coventry, CV4 7AL, United Kingdom / 29 Department of Pure and Applied Physics, Queens University, Belfast, BT7 1NN, United Kingdom / 30 Dipartimento di Ingegneria Elettrica Elettronica e Informatica, Università degli Studi di Catania, 95125 Catania, Italy / 31 Dipartimento di Ingegneria Industriale, University of Trento, Trento, Italy / 32 Dublin City University (DCU), Dublin, Ireland / 33 Ecole Polytechnique Fédérale de Lausanne (EPFL), Swiss Plasma Center (SPC), CH-1015 Lausanne, Switzerland / 34 EUROfusion Programme Management Unit, Boltzmannstr. 2, 85748 Garching, Germany / 35 EUROfusion Programme Management Unit, Culham Science Centre, Culham, OX14 3DB, United Kingdom / 36 European Commission, B-1049 Brussels, Belgium / 37 Fluid and Plasma Dynamics, ULB—Campus Plaine—CP 231 Boulevard du Triomphe, 1050 Bruxelles, Belgium / 38 FOM Institute DIFFER, Eindhoven, Netherlands / 39 Forschungszentrum Jülich GmbH, Institut für Energie- und Klimaforschung—Plasmaphysik, 52425 Jülich, Germany / 40 Fourth State Research, 503 Lockhart Dr, Austin, TX, United States of America / 41 Fusion for Energy Joint Undertaking, Josep Pl. 2, Torres Diagonal Litoral B3, 08019, Barcelona, Spain / 42 Fusion Plasma Physics, EES, KTH, SE-10044 Stockholm, Sweden / 43 General Atomics, PO Box 85608, San Diego, CA 92186-5608, United States of America / 44 HRS Fusion, West Orange, NJ, United States of America / 45 IFP-CNR, via R. Cozzi 53, 20125 Milano, Italy / 46 Institute for Plasma Research, Bhat, Gandhinagar-382 428, Gujarat State, India / 47 Institute of Nuclear Physics, Radzikowskiego 152, 31-342 Kraków, Poland / 48 Institute of Physics, Opole University, Oleska 48, 45-052 Opole, Poland / 49 Institute of Plasma Physics and Laser Microfusion, Hery 23, 01-497 Warsaw, Poland / 50 Institute of Plasma Physics AS CR, Za Slovankou 1782/3, 182 00 Praha 8, Czechia / 51 Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031, People’s Republic of China / 52 Instituto de Física, Universidade de São Paulo, Rua do Matão Travessa R Nr.187 CEP 05508-090 Cidade Universitária, São Paulo, Brasil / 53 Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, Lisboa, Portugal / 54 Ioffe Physico-Technical Institute, 26 Politekhnicheskaya, St Petersburg 194021, Russian Federation / 55 ITER Organization, Route de Vinon, CS 90 046, 13067 Saint Paul Lez Durance, France / 56 Karlsruhe Institute of Technology, PO Box 3640, D-76021 Karlsruhe, Germany / 57 Laboratorio Nacional de Fusión, CIEMAT, Madrid, Spain / 58 Laboratory for Plasma Physics Koninklijke Militaire School—Ecole Royale Militaire, Renaissancelaan 30 Avenue de la Renaissance B-1000, Brussels, Belgium / 59 Lithuanian energy institute, Breslaujos g. 3, LT-44403, Kaunas, Lithuania / 60 Magnetic Sensor Laboratory, Lviv Polytechnic National University, Lviv, Ukraine / 61 Maritime University of Szczecin, Waly Chrobrego 1-2, 70-500 Szczecin, Poland / 62 Max-Planck-Institut für Plasmaphysik, D-85748 Garching, Germany / 63 Max-Planck-Institut für Plasmaphysik, Teilinsitut Greifswald, D-17491 Greifswald, Germany / 64 MIT Plasma Science and Fusion Centre, Cambridge, MA 02139, United States of America / 65 National Centre for Nuclear Research (NCBJ), 05-400 Otwock-Świerk, Poland / 66 National Fusion Research Institute (NFRI), 169-148 Gwahak-ro, Yuseong-gu, Daejeon 305-806, Republic of Korea / 67 National Institute for Fusion Science, Oroshi, Toki, Gifu 509-5292, Japan / 68 National Institute for Fusion Science, Toki, 509-5292, Japan / 69 National Institutes for Quantum and Radiological Science and Technology, Naka, Ibaraki 311-0193, Japan / 70 National Technical University of Athens, Iroon Politechniou 9, 157 73 Zografou, Athens, Greece / 71 NCSR ‘Demokritos’, 153 10, Agia Paraskevi Attikis, Greece / 72 NRC Kurchatov Institute, 1 Kurchatov Square, Moscow 123182, Russian Federation / 73 Oak Ridge National Laboratory, Oak Ridge, TN 37831-6169, United States of America / 74 PELIN LLC, 27a, Gzhatskaya Ulitsa, Saint Petersburg, 195220, Russian Federation / 75 Politecnico di Torino, Corso Duca degli Abruzzi 24, I-10129 Torino, Italy / 76 Princeton Plasma Physics Laboratory, James Forrestal Campus, Princeton, NJ 08543, United States of America / 77 Purdue University, 610 Purdue Mall, West Lafayette, IN 47907, United States of America / 78 SCK-CEN, Nuclear Research Centre, 2400 Mol, Belgium / 79 Second University of Napoli, Consorzio CREATE, Via Claudio 21, 80125 Napoli, Italy / 80 Seoul National University, Shilim-Dong, Gwanak-Gu, Republic of Korea / 81 Slovenian Fusion Association (SFA), Jozef Stefan Institute, Jamova 39, SI-1000 Ljubljana, Slovenia / 82 Space and Plasma Physics, EES, KTH SE-100 44 Stockholm, Sweden / 83 Technical University of Denmark, Department of Physics, Bldg 309, DK-2800 Kgs Lyngby, Denmark / 84 The ‘Horia Hulubei’ National Institute for Physics and Nuclear Engineering, Magurele-Bucharest, Romania / 85 The National Institute for Cryogenics and Isotopic Technology, Ramnicu Valcea, Romania / 86 The National Institute for Laser, Plasma and Radiation Physics, Magurele-Bucharest, Romania / 87 The National Institute for Optoelectronics, Magurele-Bucharest, Romania / 88 Troitsk Insitute of Innovating and Thermonuclear Research (TRINITI), Troitsk 142190, Moscow Region, Russian Federation / 89 University of Electronic Science and Technology of China, Chengdu, People’s Republic of China / 90 Unità Tecnica Fusione, ENEA C. R. Frascati, via E. Fermi 45, 00044 Frascati (Roma), Italy / 91 Universidad Complutense de Madrid, Madrid, Spain / 92 Universidad de Sevilla, Sevilla, Spain / 93 Universidad Nacional de Educación a Distancia, Madrid, Spain / 94 Universidad Politécnica de Madrid, Grupo I2A2, Madrid, Spain / 95 Università di Roma Tor Vergata, Via del Politecnico 1, Roma, Italy / 96 University College Cork (UCC), Ireland / 97 University Milano-Bicocca, piazza della Scienza 3, 20126 Milano, Italy / 98 University of Basilicata, Consorzio CREATE, Via Claudio 21, 80125 Napoli, Italy / 99 University of California, 1111 Franklin St., Oakland, CA 94607, United States of America / 100 University of Cassino, Consorzio CREATE, Via Claudio 21, 80125 Napoli, Italy / 101 University of Helsinki, PO Box 43, FI-00014 University of Helsinki, Finland / 102 University of Innsbruck, Fusion@Österreichische Akademie der Wissenschaften (ÖAW), Innsbruck, Austria / 103 University of Latvia, 19 Raina Blvd., Riga, LV 1586, Latvia / 104 University of Lorraine, CNRS, UMR7198, YIJL, Nancy, France / 105 University of Napoli ‘Federico II’, Consorzio CREATE, Via Claudio 21, 80125 Napoli, Italy / 106 University of Napoli Parthenope, Consorzio CREATE, Via Claudio 21, 80125 Napoli, Italy / 107 University of Texas at Austin, Institute for Fusion Studies, Austin, TX 78712, United States of America / 108 University of Toyama, Toyama, 930-8555, Japan / 109 University of Tuscia, DEIM, Via del Paradiso 47, 01100 Viterbo, Italy / 110 University of York, Heslington, York YO10 5DD, United Kingdom / 111 Vienna University of Technology, Fusion@Österreichische Akademie der Wissenschaften (ÖAW), Austria / 112 VTT Technical Research Centre of Finland, PO Box 1000, FIN-02044 VTT, Finland / 113 Wigner Research Centre for Physics, PO Box 49, H-1525 Budapest, Hungary
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Modelling of combined ICRF and NBI heating in JET hybrid plasmas

  • Gallart, Dani
  • Mantsinen, Mervi
  • Challis, Clive
  • Frigione, Domenico
  • Graves, Jonathan
  • Hobirk, Joerg
  • Belonohy, Eva
  • Czarnecka, Agata
  • Eriksson, Jacob
  • Goniche, Marc
  • Hellesen, Carl
  • Jacquet, Philippe
  • Joffrin, Emmanuel
  • Krawczyk, Natalia
  • King, Damian
  • Lennholm, Morten
  • Lerche, Ernesto
  • Pawelec, Ewa
  • Sips, George
  • Solano, Emilia
  • Tsalas, Maximos
  • Valisa, Marco
  • JET Contributors
During the 2015-2016 JET campaigns many efforts have been devoted to the exploration of high performance plasma scenarios envisaged for ITER operation. In this paper we model the combined ICRF+NBI heating in selected key hybrid discharges using PION. The antenna frequency was tuned to match the cyclotron frequency of minority hydrogen (H) at the center of the tokamak coinciding with the second harmonic cyclotron resonance of deuterium. The modelling takes into account the synergy between ICRF and NBI heating through the second harmonic cyclotron resonance of deuterium beam ions which allows us to assess its impact on the neutron rate RNT. We evaluate the influence of H concentration which was varied in different discharges in order to test their role in the heating performance. According to our modelling, the ICRF enhancement of RNT increases by decreasing the H concentration which increases the ICRF power absorbed by deuterons. We find that in the recent hybrid discharges this ICRF enhancement was in the range of 10-25%. Finally, we extrapolate the results to D-T and find that the best performing hybrid discharges correspond to an equivalent fusion power of ∼7.0 MW in D-T., This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014-2018 under grant agreement No 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission. Dani Gallart would like to thank “La Caixa” for support of his PhD studies., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Shear Alfvén wave continuum spectrum with bifurcated helical core equilibria

  • Rakha, Allah
  • Lauber, Philipp
  • Mantsinen, Mervi Johanna
  • Spong, Donald
The radial structure of the continuum spectrum of shear Alfvén and Alfvén-acoustic waves in the beta-induced Alfvén eigenmode (BAE) frequency range is modeled for tokamak plasmas in the presence of 3D effects obtained from the bifurcated MHD equilibrium reconstruction. Plasma compressibility and geodesic curvature effects responsible for the low-frequency continuum spectrum calculations are invoked. In the equilibrium calculations we find that the helically distorted MHD equilibria may exist even for the axisymmetric devices if q  =  1 rational surfaces are present. The continuum calculations with the bifurcated equilibria lead to a frequency splitting between the highest frequency branch and the lowest frequency branch continua at the frequency accumulation point. Radially localised shifting of modes happens via coupling of the adjacent n  −  1 continuum around an accumulation point. Our modelling (including 3D effects) correctly reproduces the phenomenon of continuum frequency splitting and provides a possible solution for the differences of few kHz in frequency splitting, which remained unexplained with the 2D kinetic calculations (Curran et al 2012 Plasma Phys. Control. Fusion 54 055001). The pressure scaling confirms the increase of helical excursion of the magnetic axis in equilibrium reconstruction and hence the range of continuum frequency splitting. In our calculations, the existence of low-frequency continua is in agreement with the experimentally observed low-frequency modes., This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014-2018 and 2019-2020 under grant agreement No 633053. The views and opinions expressed herein do not necessarily re ect those of the European Commission. Allah Rakha is grateful for an AGAUR FI predoctoral grant to support his PhD studies and a Severo Ochoa (SO) mobility grant to support his research stay at Max Planck Institute for Plasma Physics (IPP) Garching, Germany., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Sizing of a recuperative supercritical CO2 Brayton cycle as power conversion system for DEMO fusion reactor based on Dual Coolant Lithium Lead blanket

  • Linares, José Ignacio
  • Arenas, Eva
  • Cantizano González, Alexis
  • Porras, José
  • Moratilla, Beatriz Y.
  • Batet Miracle, Lluís|||0000-0003-1882-6313
A modified recuperative supercritical CO2 cycle for DEMO fusion reactor is analysed. A layout with just one recuperator is used, because of the relatively low temperature of the breeding blanket coolants. The proposed cycle is able to integrate several thermal sources with different temperature ranges and includes two kinds of thermal energy storage to overcome the pulse operation: a two-tank molten salt storage and a concrete storage. The design point is obtained using the Engineering Equation Solver (EES) environment, which allows to use pure substance models for CO2, helium and water. Once the design point is calculated, the sizing of pipes, heat exchangers, turbomachines and energy storage systems has been performed in order to obtain a preliminary estimation of the layout and its complexity. So, the power conversion system has been split into four equal parts in order to use commercial pipe diameters. Even though Printed Circuit Heat Exchangers (PCHE) have been used, extremely large sizes have been obtained, especially for the HTR recuperator. These sizes contrast with the small values obtained for the turbomachines, whose preliminary design has been carried out, using the AXIAL™ meanline design software. In addition, the two largest heat exchangers are divided into serial and parallel configurations when assessing the allocation of the components of the power conversion system to reduce the footprint. An average electric efficiency (including pulse and dwell period) of 28.25% has been reached. The required mass of molten salt per each power conversion subsystem is 2568¿t, while the mass of concrete is 833¿t. Regarding the footprint, 85¿×¿170 m2 are required for each power conversion subsystem, including the storage systems.
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Dynamic study of a supercritical carbon dioxide power cycle for DEMO

  • Batet Miracle, Lluís|||0000-0003-1882-6313
  • Linares, José Ignacio
  • Aulet Prieto, David
  • Cantizano González, Alexis
  • Griñó Cubero, Robert|||0000-0001-6045-4600
  • Moratilla, Beatriz Y.
In the framework of the research program undertaken by the EUROFusion consortium (within H2020), the feasibility has been analysed of using a supercritical carbon dioxide Brayton cycle as the power conversion system in a future fusion nuclear reactor with breeding blankets of the type Dual Coolant Lithium-Lead. The integration in the layout of the thermal sources has been optimized and thermal energy storage has been featured in order to decouple the reactor operation from the power generation. Dynamic modelling of the selected design has been performed with the thermal-hydraulic system code RELAP5-3D. Presently the model only includes the CO2 cycle, and the circuits of fluids exchanging heat directly with the cycle, along with all the needed heat exchangers. The code allows the simulation of control systems. Control strategies aimed to stabilize some plant parameters have been implemented.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Contribution to safety analyses of DEMO HCPB using AINA code

  • Baeza Pérez, Eduard|||0000-0002-2715-622X
  • Blas del Hoyo, Alfredo de|||0000-0002-0868-9514
  • Riego Pérez, Albert|||0000-0001-8571-1546
  • Fabbri, Marco
The motivation of the current work, framed under the safety EUROfusion activities to develop DEMO, is to present the conclusions drawn from our contribution to the safety studies of the HCPB DEMO carried out by the team tasked with AINA code development. During 2016 and 2017 a new AINA version was built in order to evaluate plasma evolution and in-vessel components strains inside the European DEMO designs. As a result, AINA is able to foresee several accident scenarios as plasma disruptions or structural meltings due to LOPCs (Loss Of Plasma Control) and in-vessel melt either of FW, blanket structure and/or divertor modules because of thermal stresses due to LOCAs. After due analysis, it has concluded that it would be desirable to carry out a design review focused on ensuring a suitable operating temperature range with a bigger safety margin for all the materials which make up the HCPB BB, as well as the need to guarantee a quick detection and actuation by means of a proper system, depending on the affected equipment, when the most demanding transients take place which may drive the reactor to melting scenarios and very energetic plasma disruptions. These events include an increase of fueling above 50%, a permanent improvement in the confinement time and a punctual impurity increase above 300%. Other perturbations has been studied which provide information on non-dangerous cases, impossible situations or melting processes., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Observations and modelling of ion cyclotron emission observed in JET plasmas using a sub-harmonic arc detection system during ion cyclotron resonance heating

  • McClements, K.G.
  • Brisset, A.
  • Chapman, B.
  • Dendy, R.O.
  • Jacquet, P.
  • Kiptily, V.G.
  • Mantsinen, Mervi
  • Reman, B.C.G.
  • JET Contributors
Measurements are reported of electromagnetic emission close to the cyclotron frequency of energetic ions in JET plasmas heated by waves in the ion cylotron range of frequencies (ICRF). Hydrogen was the majority ion species in all of these plasmas. The measurements were obtained using a sub-harmonic arc detection system in the transmission lines of one of the ICRF antennas. The measured ion cyclotron emission spectra were strongly filtered by the antenna system, and typically contained sub-structure, consisting of sets of peaks with a separation of a few kHz, suggesting the excitation of compressional Alfvén eigenmodes closely spaced in frequency. In most cases the energetic ions can be clearly identified as ICRF wave-accelerated 3He minority ions, although in two pulses the emission may have been produced by energetic 4He ions, originating from third harmonic ICRF wave acceleration. It is proposed that the emission close to the 3He cyclotron frequency was produced by energetic ions of this species undergoing drift orbit excursions to the outer midplane plasma edge. Particle-in-cell and hybrid (kinetic ion, fluid electron) simulations using plasma parameters corresponding to edge plasma conditions in these JET pulses, and energetic particle parameters inferred from the cyclotron resonance location, indicate strong excitation of waves at multiple 3He cyclotron harmonics, including the fundamental, which is identified with the observed emission. These results underline the potential importance of ICE measurements as a method of studying confined fast particles that are strongly suprathermal but have insufficient energies or are not present in sufficient numbers to excite detectable levels of γ-ray emission or other collective instabilities., This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014–2018 under grant agreement No 633053 and from the RCUK Energy Programme (grant number EP/P012450/1). The views and opinions expressed herein do not necessarily reflect those of the European Commission. AB was supported by the Embassy of France in the United Kingdom. We thank Ernesto Lerche for helpful information on the determination of He concentration in the pulses discussed in the paper., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Synergetic heating of D-NBI ions in the vicinity of the mode conversion layer in H-D plasmas in JET with the ITER like wall

  • Ongena, J.
  • Kazakov, Ye O.
  • Baranov, Y.
  • Hellesen, C.
  • Eriksson, J.
  • Johnson, T.
  • Kiptily, V.G.
  • Mantsinen, Mervi J.
  • Nocente, M.
  • Bilato, R.
  • Cardinali, A.
  • Castaldo, C.
  • Crombé, K.
  • Czarnecka, A.
  • Dumont, R.
  • Faustin, J.
  • Giacomelli, L.
  • Goloborodko, V.
  • Graves, J.
  • Jacquet, Ph.
  • Krawczyk, N.
  • Lerche, E.
  • Meneses, L.
  • Nave, M.F.F.
  • Patten, H.
  • Schneider, M.
  • Van Eester, D.
  • Weisen, H.
  • Wright, J.C.
  • JET Contributors
This paper discusses the extension of the ‘three-ion’ species ICRF technique for heating mixture plasmas using fast injected NBI ions as resonant ‘third’ species. In this scenario the ICRF power is absorbed by the fast beam ions in the vicinity of the mode conversion layer where the left-hand polarized RF electric field E+ is strongly enhanced. The ions in the beam velocity distribution that have a Doppler-shifted resonance close to the mode conversion layer efficiently absorb RF power and undergo acceleration. We show first experimental observations of ICRF heating of D-NBI ions in H-D plasmas in JET with the ITER-like wall. In agreement with theoretical predictions and numerical modelling, acceleration of the D-NBI ions in this D-(DNBI)-H scenario is confirmed by several fast-ion measurements. An extension of the heating scheme discussed here is acceleration of T-NBI and D-NBI ions in D-T plasmas, offering the potential to further boost the Q-value in future D-T campaigns in JET., The support from the JET team is warmly acknowledged. This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014-2018 under grant agreement No 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission and the ITER Organization., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Analysis of the potential of ICRF waves to heat bulk ions in DEMO

  • Gallart, Daniel|||0000-0003-1663-3550
  • Mantsinen, Mervi
  • Kazakov, Yevgen
While ITER’s main purpose is to confirm the feasibility of nuclear fusion as an energy source, DEMO is planned as the first fusion reactor to produce net electrical energy. Our analysis is carried out for the DEMO 2015 (from now on DEMO2), using the ICRF modelling codes PION and TORIC. We also have analyzed the previous design DEMO 2013 (from now on DEMO1), This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014-2018 under grant agreement No 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission. We are grateful to Dr. R. Wenninger and Dipl.-Ing T. Franke (PPPT, Garching) for DEMO parameters., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Simulations of combined ICRF and NBI heating for high fusion performance in JET

  • Gallart, Daniel|||0000-0003-1663-3550
  • Mantsinen, Mervi
  • Garzotti, Luca
  • Bilato, Roberto
  • Challis, Clive
  • Garcia, Jerónimo
  • Gutierrez-Milla, Albert
  • Johnson, Thomas
  • Lerche, Ernesto
  • Sáez, Xavier
  • van Eester, Dirk
We report on simulations aimed at optimizing external heating using neutral beam injection (NBI) and radiofrequency waves in the ion cyclotron range of frequencies (ICRF) for high fusion yield in the JET tokamak. In this paper, D and DT plasmas are analyzed taking into account the NBI+RF synergy focusing on two different minority ICRF schemes, He and H, respectively. Our results show that by increasing external heating power to the maximum power available, the fusion neutron rate can be enhanced in D plasma by a factor of 2-3 with respect to our reference record D discharge. Regarding the DT plasma we present the external heating performance under the variation of key plasma parameters. We also study the impact of the effects of ICRH to the fusion yield and show that the ICRH power results in an enhanced fusion yield in the whole parameter space studied., This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014-2018 under grant agreement No 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission. Dani Gallart would like to express his gratitude to “La Caixa” for support of his PhD studies.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Overview of JET results for optimising ITER operation

  • Mailloux, Joelle
  • Abid, N.
  • Abraham, K.
  • Abreu, Paulo
  • Adabonyan, O.
  • Adrich, P.
  • Gadariya, G.
  • Gallart Escolà, Daniel
  • Manyer Fuertes, Jordi|||0000-0002-0178-3890
  • Mantsinen, Mervi Johanna
The JET 2019–2020 scientific and technological programme exploited the results of years of concerted scientific and engineering work, including the ITER-like wall (ILW: Be wall and W divertor) installed in 2010, improved diagnostic capabilities now fully available, a major neutral beam injection upgrade providing record power in 2019–2020, and tested the technical and procedural preparation for safe operation with tritium. Research along three complementary axes yielded a wealth of new results. Firstly, the JET plasma programme delivered scenarios suitable for high fusion power and alpha particle (a) physics in the coming D–T campaign (DTE2), with record sustained neutron rates, as well as plasmas for clarifying the impact of isotope mass on plasma core, edge and plasma-wall interactions, and for ITER pre-fusion power operation. The efficacy of the newly installed shattered pellet injector for mitigating disruption forces and runaway electrons was demonstrated. Secondly, research on the consequences of long-term exposure to JET-ILW plasma was completed, with emphasis on wall damage and fuel retention, and with analyses of wall materials and dust particles that will help validate assumptions and codes for design and operation of ITER and DEMO. Thirdly, the nuclear technology programme aiming to deliver maximum technological return from operations in D, T and D–T benefited from the highest D–D neutron yield in years, securing results for validating radiation transport and activation codes, and nuclear data for ITER., This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014–2018 and 2019–2020 under Grant Agreement No. 633053., Peer Reviewed, Article signat per 1223 autors/autores: J. Mailloux1, N. Abid1, K. Abraham1, P. Abreu2, O. Adabonyan1, P. Adrich3, V. Afanasev4, M. Afzal1, T. Ahlgren5, L. Aho-Mantila6, N. Aiba7, M. Airila6, M. Akhtar1, R. Albanese8, M. Alderson-Martin1, D. Alegre9, S. Aleiferis10, A. Aleksa1, A.G. Alekseev11, E. Alessi12, P. Aleynikov13, J. Algualcil14, M. Ali1, M. Allinson1, B. Alper1, E. Alves2, G. Ambrosino8, R. Ambrosino8, V. Amosov15, E.Andersson Sunden16, P. Andrew13, B.M. Angelini17, C. Angioni18, I. Antoniou1, L.C. Appel1, C. Appelbee1, S. Aria1, M. Ariola8, G. Artaserse17, W. Arter1, V. Artigues18, N. Asakura7, A. Ash1, N. Ashikawa19, V. Aslanyan20, M. Astrain21, O. Asztalos22, D. Auld1, F. Auriemma23, Y. Austin1, L. Avotina24, E. Aymerich25, A. Baciero9, F. Bairaktaris26, J. Balbin27, L. Balbinot23, I. Balboa1, M. Balden18, C. Balshaw1, N. Balshaw1, V.K. Bandaru18, J. Banks1, Yu.F. Baranov1, C. Barcellona28, A. Barnard1, M. Barnard1, R. Barnsley13, A. Barth1, M. Baruzzo17, S. Barwell1, M. Bassan13, A. Batista2, P. Batistoni17, L. Baumane24, B. Bauvir13, L. Baylor29, P.S. Beaumont1, D. Beckett1, A. Begolli1, M. Beidler29, N. Bekris30,31, M. Beldishevski1, E. Belli32, F. Belli17, É. Belonohy1, M. Ben Yaala33, J. Benayas1, J. Bentley1, H. Bergsåker34, J. Bernardo2, M. Bernert18, M. Berry1, L. Bertalot13, H. Betar35, M. Beurskens36, S. Bickerton1, B. Bieg37, J. Bielecki38, A. Bierwage7, T. Biewer29, R. Bilato18, P. Bílková39, G. Birkenmeier18, H. Bishop1, J.P.S. Bizarro2, J. Blackburn1, P. Blanchard40, P. Blatchford1, V. Bobkov18, A. Boboc1, P. Bohm39, T. Bohm41, I. Bolshakova42, T. Bolzonella23, N. Bonanomi18, D. Bonfiglio23, X. Bonnin13, P. Bonofiglo43, S. Boocock1, A. Booth1, J. Booth1, D. Borba2,30, D. Borodin44, I. Borodkina39,44, C. Boulbe45, C. Bourdelle27, M. Bowden1, K. Boyd1, I.Bozicevic Mihalic46, S.C. Bradnam1, V. Braic47, L. Brandt48, R. Bravanec49, B. Breizman50, A. Brett1, S. Brezinsek44, M. Brix1, K. Bromley1, B. Brown1, D. Brunetti1,12, R. Buckingham1, M. Buckley1, R. Budny, J. Buermans51, H. Bufferand27, P. Buratti17, A. Burgess1, A. Buscarino28, A. Busse1, D. Butcher1, E.de la Cal9, G. Calabrò52, L. Calacci53, R. Calado2, Y. Camenen54, G. Canal55, B. Cannas25, M. Cappelli17, S. Carcangiu25, P. Card1, A. Cardinali17, P. Carman1, D. Carnevale53, M. Carr1, D. Carralero9, L. Carraro23, I.S. Carvalho2, P. Carvalho2, I. Casiraghi56, F.J. Casson1, C. Castaldo17, J.P. Catalan14, N. Catarino2, F. Causa12, M. Cavedon18, M. Cecconello16, C.D. Challis1, B. Chamberlain1, C.S. Chang43, A. Chankin18, B. Chapman1,57, M. Chernyshova58, A. Chiariello8, P. Chmielewski58, A. Chomiczewska58, L. Chone59, G. Ciraolo27, D. Ciric1, J. Citrin60, Ł. Ciupinski61, M. Clark1, R. Clarkson1, C. Clements1, M. Cleverly1, J.P. Coad1, P. Coates1, A. Cobalt1, V. Coccorese8, R. Coelho2, J.W. Coenen44, I.H. Coffey62, A. Colangeli17, L. Colas27, C. Collins29, J. Collins1, S. Collins1, D. Conka24, S. Conroy16, B. Conway1, N.J. Conway1, D. Coombs1, P. Cooper1, S. Cooper1, C. Corradino28, G. Corrigan1, D. Coster18, P. Cox1, T. Craciunescu63, S. Cramp1, C. Crapper1, D. Craven1, R. Craven1, M.Crialesi Esposito48, G. Croci56, D. Croft1, A. Croitoru63, K. Crombe51,64, T. Cronin1, N. Cruz2, C. Crystal32, G. Cseh22, A. Cufar65, A. Cullen1, M. Curuia66, T. Czarski58, H. Dabirikhah1, A.Dal Molin56, E. Dale1, P. Dalgliesh1, S. Dalley1, J. Dankowski38, P. David18, A. Davies1, S. Davies1, G. Davis1, K. Dawson1, S. Dawson1, I.E. Day1, M. De Bock13, G. De Temmerman13, G. De Tommasi8, K. Deakin1, J. Deane1, R. Dejarnac39, D. Del Sarto35, E. Delabie29, D. Del-Castillo-Negrete29, A. Dempsey67, R.O. Dendy1,57, P. Devynck27, A. Di Siena18, C. Di Troia17, T. Dickson1, P. Dinca63, T. Dittmar44, J. Dobrashian1, R.P. Doerner68, A.J.H. Donne´69, S. Dorling1, S. Dormido-Canto70, D. Douai27, S. Dowson1, R. Doyle67, M. Dreval71, P. Drewelow36, P. Drews44, G. Drummond1, Ph. Duckworth13, H. Dudding1,72, R. Dumont27, P. Dumortier51, D. Dunai22, T. Dunatov46, M. Dunne18, I. Duran39, F. Durodie51, R. Dux18, A. Dvornova27, R. Eastham1, J. Edwards1, Th. Eich18, A. Eichorn1, N. Eidietis32, A. Eksaeva44, H. El Haroun1, G. Ellwood13, C. Elsmore1, O. Embreus73, S. Emery1, G. Ericsson16, B. Eriksson16, F. Eriksson74, J. Eriksson16, L.G. Eriksson75, S. Ertmer44, S. Esquembri21, A.L. Esquisabel76, T. Estrada9, G. Evans1, S. Evans1, E. Fable18, D. Fagan1, M. Faitsch18, M. Falessi17, A. Fanni25, A. Farahani1, I. Farquhar1, A. Fasoli40, B. Faugeras45, S. Fazinic46, F. Felici40, R. Felton1, A. Fernandes2, H. Fernandes2, J. Ferrand1, D.R. Ferreira2, J. Ferreira2, G. Ferrò53, J. Fessey1, O. Ficker39, A.R. Field1, A. Figueiredo2, J. Figueiredo2,30, A. Fil1, N. Fil1,20, P. Finburg1, D. Fiorucci23, U. Fischer31, G. Fishpool1, L. Fittill1, M. Fitzgerald1, D. Flammini17, J. Flanagan1, K. Flinders1, S. Foley1, N. Fonnesu17, M. Fontana40, J.M. Fontdecaba9, S. Forbes1, A. Formisano8, T. Fornal58, L. Fortuna28, E. Fortuna-Zalesna61, M. Fortune1, C. Fowler1, E. Fransson74, L. Frassinetti34, M. Freisinger44, R. Fresa8, R. Fridström34, D. Frigione53, T. Fülöp73, M. Furseman1, V. Fusco24, S. Futatani17, D. Gadariya77, K. Gál69, D. Galassi40, K. Gałazka58, S. Galeani53, D. Gallart78, R. Galvao55, Y. Gao44, J. Garcia27, M. García-Muñoz79, M. Gardener1, L. Garzotti1, J. Gaspar80, R. Gatto81, P. Gaudio53, D. Gear1, T. Gebhart29, S. Gee1, M. Gelfusa53, R. George1, S.N. Gerasimov1, G. Gervasini12, M. Gethins1, Z. Ghani1, M. Gherendi63, F. Ghezzi12, J.C. Giacalone27, L. Giacomelli12, G. Giacometti54, C. Gibson1, K.J. Gibson72, L. Gil2, A. Gillgren74, D. Gin4, E. Giovannozzi17, C. Giroud1, R. Glen1, S. Glöggler18, J. Goff1, P. Gohil32, V. Goloborodko82, R. Gomes2, B. Gonçalves2, M. Goniche27, A. Goodyear1, S. Gore1, G. Gorini56, T. Görler18, N. Gotts1, R. Goulding43, E. Gow1, B. Graham1, J.P. Graves40, H. Greuner18, B. Grierson43, J. Griffiths1, S. Griph1, D. Grist1, W. Gromelski58, M. Groth59, R. Grove29, M. Gruca58, D. Guard1, N. Gupta1, C. Gurl1, A. Gusarov83, L. Hackett1, S. Hacquin27,30, R. Hager43, L. Hägg16, A. Hakola6, M. Halitovs24, S. Hall1, S.A. Hall1, S. Hallworth-Cook1, C.J. Ham1, D. Hamaguchi7, M. Hamed27, C. Hamlyn-Harris1, K. Hammond1, E. Harford1, J.R. Harrison1, D. Harting1, Y. Hatano84, D.R. Hatch50, T. Haupt1, J. Hawes1, N.C. Hawkes1, J. Hawkins1, T. Hayashi7, S. Hazael1, S. Hazel1, P. Heesterman1, B. Heidbrink85, W. Helou13, O. Hemming1, S.S. Henderson1, R.B. Henriques2, D. Hepple1, J. Herfindal29, G. Hermon1, J. Hill1, J.C. Hillesheim1, K. Hizanidis26, A. Hjalmarsson16, A. Ho60, J. Hobirk18, O. Hoenen13, C. Hogben1, A. Hollingsworth1, S. Hollis1, E. Hollmann68, M. Hölzl18, B. Homan45, M. Hook1, D. Hopley1, J. Horácek39, D. Horsley1, N. Horsten59, A. Horton1, L.D. Horton30,40, L. Horvath1,72, S. Hotchin1, R. Howell1, Z. Hu56, A. Huber44, V. Huber44, T. Huddleston1, G.T.A. Huijsmans13, P. Huynh27, A. Hynes1, M. Iliasova4, D. Imrie1, M. Imrísek39, J. Ingleby1, P. Innocente23, K. Insulander Björk73, N. Isernia8, I. Ivanova-Stanik58, E. Ivings1, S. Jablonski58, S. Jachmich13,30,51, T. Jackson1, P. Jacquet1, H. Järleblad86, F. Jaulmes39, J.Jenaro Rodriguez1, I. Jepu63, E. Joffrin27, R. Johnson1, T. Johnson34, J. Johnston1, C. Jones1, G. Jones1, L. Jones1, N. Jones1, T. Jones1, A. Joyce1, R. Juarez14, M. Juvonen1, P. Kalnin¸ a24, T. Kaltiaisenaho6, J. Kaniewski1, A. Kantor1, A. Kappatou18, J. Karhunen5, D. Karkinsky1, Yu Kashchuk87, M. Kaufman29, G. Kaveney1, Ye.O. Kazakov51, V. Kazantzidis26, D.L. Keeling1, R. Kelly1, M. Kempenaars13, C. Kennedy1, D. Kennedy1, J. Kent1, K. Khan1, E. Khilkevich4, C. Kiefer18, J. Kilpeläinen59, C. Kim32, Hyun-Tae Kim1,30, S.H. Kim13, D.B. King1, R. King1, D. Kinna1, V.G. Kiptily1, A. Kirjasuo6, K.K. Kirov1, A. Kirschner44, T. kiviniemi59, G. Kizane24, M. Klas88, C. Klepper29, A. Klix31, G. Kneale1, M. Knight1, P. Knight1, R. Knights1, S. Knipe1, M. Knolker32, S. Knott89, M. Kocan13, F. Köchl1, I. Kodeli65, Y. Kolesnichenko82, Y. Kominis26, M. Kong1, V. Korovin71, B. Kos65, D. Kos1, H.R. Koslowski44, M. Kotschenreuther50, M. Koubiti54, E. Kowalska-Strzeciwilk ˛ 58, K. Koziol3, A. Krasilnikov87, V. Krasilnikov13,15, M. Kresina1,27, K. Krieger18, N. Krishnan1, A. Krivska51, U. Kruezi13, I. Ksia˛zek ˙ 90, A.B. Kukushkin11, H. Kumpulainen59, T. Kurki-Suonio59, H. Kurotaki7, S. Kwak36, O.J. Kwon91, L. Laguardia12, E. Lagzdina24, A. Lahtinen5, A. Laing1, N. Lam1, H.T. Lambertz44, B. Lane1, C. Lane1, E.Lascas Neto40, E. Łaszynska58, K.D. Lawson1, A. Lazaros26, E. Lazzaro12, G. Learoyd1, Chanyoung Lee92, S.E. Lee84, S. Leerink59, T. Leeson1, X. Lefebvre1, H.J. Leggate67, J. Lehmann1, M. Lehnen13, D. Leichtle31,93, F. Leipold13, I. Lengar65, M. Lennholm1,75, E. Leon Gutierrez9, B. Lepiavko82, J. Leppänen6, E. Lerche51, A. Lescinskis24, J. Lewis1, W. Leysen83, L. Li44, Y. Li44, J. Likonen6, Ch. Linsmeier44, B. Lipschultz72, X. Litaudon27,30, E. Litherland-Smith1, F. Liu27,30, T. Loarer27, A. Loarte13, R. Lobel1, B. Lomanowski29, P.J. Lomas1, J.M. Lopez21, R. Lorenzini23, S. Loreti17, U. Losada9, V.P. Loschiavo8, M. Loughlin13, Z. Louka1, J. Lovell29, T. Lowe1, C. Lowry1,75, S. Lubbad1, T. Luce13, R. Lucock1, A. Lukin94, C. Luna95, E.de la Luna9, M. Lungaroni53, C.P. Lungu63, T. Lunt18, V. Lutsenko82, B. Lyons32, A. Lyssoivan51, M. Machielsen40, E. Macusova39, R. Mäenpää59, C.F. Maggi1, R. Maggiora96, M. Magness1, S. Mahesan1, H. Maier18, R. Maingi43, K. Malinowski58, P. Manas18,54, P. Mantica12, M.J. Mantsinen97, J. Manyer78, A. Manzanares98, Ph. Maquet13, G. Marceca40, N. Marcenko87, C. Marchetto99, O. Marchuk44, A. Mariani12, G. Mariano17, M. Marin60, M. Marinelli53, T. Markovicˇ39, D. Marocco17, L. Marot33, S. Marsden1, J. Marsh1, R. Marshall1, L. Martellucci53, A. Martin1, A.J. Martin1, R. Martone8, S. Maruyama13, M. Maslov1, S. Masuzaki19, S. Matejcik88, M. Mattei8, G.F. Matthews1, D. Matveev44, E. Matveeva39, A. Mauriya2, F. Maviglia8, M. Mayer18, M.-L. Mayoral1,69, S. Mazzi54, C. Mazzotta17, R. McAdams1, P.J. McCarthy89 K.G. McClements1, J. McClenaghan32, P. McCullen1, D.C. McDonald1, D. McGuckin1, D. McHugh1, G. McIntyre1, R. McKean1, J. McKehon1, B. McMillan57, L. McNamee1, A. McShee1, A. Meakins1, S. Medley1, C.J. Meekes60,100, K. Meghani1, A.G. Meigs1, G. Meisl18, S. Meitner29, S. Menmuir1, K. Mergia10, S. Merriman1, Ph. Mertens44, S. Meshchaninov15, A. Messiaen51, R. Michling57, P. Middleton1, D. Middleton-Gear1, J. Mietelski38, D. Milanesio96, E. Milani53, F. Militello1, A.Militello Asp1, J. Milnes1, A. Milocco56, G. Miloshevsky101, C. Minghao1, S. Minucci52, I. Miron63, M. Miyamoto102, J. Mlynár39,103, V. Moiseenko71, P. Monaghan1, I. Monakhov1, T. Moody1, S. Moon34, R. Mooney1, S. Moradi51, J. Morales27, R.B. Morales1, S. Mordijck104, L. Moreira1, L. Morgan1, F. Moro17, J. Morris1, K.-M. Morrison1, L. Msero13,33, D. Moulton1, T. Mrowetz1, T. Mundy1, M. Muraglia54, A. Murari23,30, A. Muraro12, N. Muthusonai1, B. N’Konga45, Yong-Su Na92, F. Nabais2, M. Naden1, J. Naish1, R. Naish1, F. Napoli17, E. Nardon27, V. Naulin86, M.F.F. Nave2, I. Nedzelskiy3, G. Nemtsev15, V. Nesenevich4, I. Nestoras1, R. Neu18, V.S. Neverov11, S. Ng1, M. Nicassio1, A.H. Nielsen86, D. Nina2, D. Nishijima105, C. Noble1, C.R. Nobs1, M. Nocente56, D. Nodwell1, K. Nordlund5, H. Nordman13, R. Normanton1, J.M. Noterdaeme18, S. Nowak12, E. Nunn1, H. Nyström34, M. Oberparleiter74, B. Obryk38, J. O’Callaghan1, T. Odupitan1, H.J.C. Oliver1,50, R. Olney1, M. O’Mullane106, J. Ongena51, E. Organ1, F. Orsitto8, J. Orszagh88, T. Osborne32, R. Otin1, T. Otsuka107, A. Owen1, Y. Oya108, M. Oyaizu7, R. Paccagnella23, N. Pace1, L.W. Packer1, S. Paige1, E. Pajuste24, D. Palade63, S.J.P. Pamela1, N. Panadero9, E. Panontin56, A. Papadopoulos26, G. Papp18, P. Papp88, V.V. Parail1, C. Pardanaud54, J. Parisi1,109, F.Parra Diaz109, A. Parsloe1, M. Parsons29, N. Parsons1, M. Passeri53, A. Patel1, A. Pau40, G. Pautasso18, R. Pavlichenko71, A. Pavone36, E. Pawelec90, C.Paz Soldan110, A. Peacock1,75, M. Pearce1, E. Peluso53, C. Penot13, K. Pepperell1, R. Pereira2, T. Pereira2, E.Perelli Cippo12, P. Pereslavtsev107, C. Perez von Thun58, V. Pericoli58, D. Perry1, M. Peterka39, P. Petersson34, G. Petravich22, N. Petrella1, M. Peyman1, M. Pillon17, S. Pinches13, G. Pintsuk44, W. Pires de Sá55, A. Pires dos Reis55, C. Piron17, L. Pionr23,111, A. Pironti8, R. Pitts13, K.L. van de Plassche60, N. Platt1, V. Plyusnin2, M. Podesta43, G. Pokol22, F.M. Poli43, O.G. Pompilian63, S. Popovichev1, M. Poradzinski58, M.T. Porfiri17, M. Porkolab20, C. Porosnicu63, M. Porton1, G. Poulipoulis112, I. Predebon23, G. Prestopino53, C. Price1, D. Price1, M. Price1, D. Primetzhofer16, P. Prior1, G. Provatas46, G. Pucella17, P. Puglia40, K. Purahoo1, I. Pusztai73, O. Putignano56, T. Pütterich18, A. Quercia8, E. Rachlew73, G. Radulescu29, V. Radulovic65, M. Rainford1, P. Raj31, G. Ralph1, G. Ramogida17, D. Rasmussen29, J.J. Rasmussen86, G. Rattá9, S. Ratynskaia113, M. Rebai12, D. Refy22, R. Reichle13, M. Reinke29, D. Reiser44, C. Reux27, S. Reynolds1, M.L. Richiusa1, S. Richyal1, D. Rigamonti12, F.G. Rimini1, J. Risner29, M. Riva17, J. Rivero-Rodriguez79, C.M. Roach1, R. Robins1, S. Robinson1, D. Robson1, R. Rodionov87, P. Rodrigues2, M.Rodriguez Ramos109, P. Rodriguez-Fernandez3, F. Romanelli74, M. Romanelli1, S. Romanelli1, J. Romazanov44, R. Rossi53, S. Rowe1, D. Rowlands1,30, M. Rubel34, G. Rubinacci8, G. Rubino52, L. Ruchko55, M. Ruiz21, J.Ruiz Ruiz109, C. Ruset63, J. Rzadkiewicz3, S. Saarelma1, E. Safi5, A. Sahlberg16, M. Salewski86, A. Salmi6, R. Salmon1, F. Salzedas2,114, I. Sanders1, D. Sandiford1, B. Santos2, A. Santucci17, K. Särkimäki73, R. Sarwar1, I. Sarychev1, O. Sauter40, P. Sauwan14, N. Scapin48, F. Schluck44, K. Schmid18, S. Schmuck12, M. Schneider13, P.A. Schneider18, D. Schwörer67, G. Scott1, M. Scott1, D. Scraggs1, S. Scully1, M. Segato1, Jaemin Seo92, G. Sergienko44, M. Sertoli1, S.E. Sharapov1, A. Shaw1, H. Sheikh1, U. Sheikh40, A. Shepherd1, A. Shevelev4, P. Shigin13, K. Shinohara115, S. Shiraiwa43, D. Shiraki29, M. Short1, G. Sias25, S.A. Silburn1, A. Silva2, C. Silva2, J. Silva1, D. Silvagni18, D. Simfukwe1, J. Simpson1,59, D. Sinclair1, S.K. Sipilä59, A.C.C. Sips75, P. Siren5, A. Sirinelli13, H. Sjöstrand16, N. Skinner1, J. Slater1, N. Smith1, P. Smith1, J. Snell1, G. Snoep60, L. Snoj65, P. Snyder32, S. Soare63, E.R. Solano9, V. Solokha59, A. Somers67, C. Sommariva40, K. Soni33, E. Sorokovoy71, M. Sos39, J. Sousa2, C. Sozzi12, S. Spagnolo23, T. Spelzini1, F. Spineanu63, D. Spong29, D. Sprada1, S. Sridhar27, C. Srinivasan1, G. Stables1, G. Staebler32, I. Stamatelatos10, Z. Stancar65, P. Staniec1, G. Stankunas116, M. Stead1, E. Stefanikova34, A. Stephen1, J. Stephens1, P. Stevenson1, M. Stojanov1, P. Strand74, H.R. Strauss117, S. Strikwerda1, P. Ström34, C.I. Stuart1, W. Studholme1, M. Subramani1, E. Suchkov88, S. Sumida7, H.J. Sun1, T.E. Susts24, J. Svensson36, J. Svoboda39, R. Sweeney20, D. Sytnykov71, T. Szabolics22, G. Szepesi1, B. Tabia1, T. Tadic´46, B. Tál18, T. Tala6, A. Tallargio1, P. Tamain27, H. Tan1, K. Tanaka19, W. Tang43, M. Tardocchi12, D. Taylor1, A.S. Teimane24, G. Telesca58, N. Teplova4, A. Teplukhina43, D. Terentyev83, A. Terra44, D. Terranova23, N. Terranova17, D. Testa40, E. Tholerus1,34, J. Thomas1, E. Thoren113, A. Thorman1, W. Tierens18, R.A. Tinguely20, A. Tipton1, H. Todd1, M. Tokitani19, P. Tolias113, M. Tomes39, A. Tookey1, Y. Torikai118, U. von Toussaint18, P. Tsavalas10, D. Tskhakaya39,119, I. Turner1, M. Turner1, M.M. Turner67, M. Turnyanskiy1,69, G. Tvalashvili1, S. Tyrrell1, M. Tyshchenko82, A. Uccello12, V. Udintsev13, G. Urbanczyk27, A. Vadgama1, D. Valcarcel1, M. Valisa23, P.Vallejos Olivares34, O. Vallhagen73, M. Valovicˇ1, D. Van Eester51, J. Varje59, S. Vartanian27, T. Vasilopoulou10, G. Vayakis13, M. Vecsei22, J. Vega9, S. Ventre8, G. Verdoolaege64, C. Verona53, G.Verona Rinati53, E. Veshchev13, N. Vianello23, E. Viezzer79, L. Vignitchouk113, R. Vila9, R. Villari17, F. Villone8, P. Vincenzi23, I. Vinyar94, B. Viola17, A.J. Virtanen59, A. Vitins24, Z. Vizvary1, G. Vlad17, M. Vlad63, P. Vondrácek39, P.de Vries13, B. Wakeling1, N.R. Walkden1, M. Walker1, R. Walker1, M. Walsh13, E. Wang44, N. Wang1, S. Warder1, R. Warren1, J. Waterhouse1, C. Watts13, T. Wauters51, A. Weckmann34, H.Wedderburn Maxwell1, M. Weiland18, H. Weisen40, M. Weiszflog16, P. Welch1, N. Wendler58, A. West1, M. Wheatley1, S. Wheeler1, A. Whitehead1, D. Whittaker1, A. Widdowson1, S. Wiesen44, J. Wilkinson1, J.C. Williams1, D. Willoughby1, I. Wilson1, J. Wilson1, T. Wilson1, M. Wischmeier18, P. Wise1, G. Withenshaw1, A. Withycombe1, D. Witts1, A. Wojcik-Gargula38, E. Wolfrum18, R. Wood1, C. Woodley1, R. Woodley1, B. Woods1, J. Wright1, J.C. Wright20, T. Xu1, D. Yadikin74, M. Yajima19, Y. Yakovenko82, Y. Yang13, W. Yanling44, V. Yanovskiy39, I. Young1, R. Young1, R.J. Zabolockis24, J. Zacks1, R. Zagorski3, F.S. Zaitsev88, L. Zakharov5, A. Zarins24, D. Zarzoso Fernandez54, K.-D. Zastrow1, Y. Zayachuk1, M. Zerbini17, W. Zhang18, Y. Zhou34, M. Zlobinski44, A. Zocco36, A. Zohar65, V. Zoita63, S. Zoletnik22, V.K. Zotta81, I. Zoulias1, W. Zwingmann2 and I. Zychor3 // 1 United Kingdom Atomic Energy Authority, Culham Science Centre, Abingdon, Oxon, OX14 3DB, United Kingdom of Great Britain and Northern Ireland 2 Instituto de Plasmas e Fusao Nuclear, Instituto Superior Técnico, Universidade de Lisboa, 1049-001 Lisboa, Portugal 3 National Centre for Nuclear Research (NCBJ), 05-400 Otwock-Swierk, Poland 4 Ioffe Physico-Technical Institute, 26 Politekhnicheskaya, St Petersburg 194021, Russia 5 University of Helsinki, PO Box 43, FI-00014 University of Helsinki, Finland 6 VTT Technical Research Centre of Finland, PO Box 1000, FIN-02044 VTT, Finland 7 National Institutes for Quantum and Radiological Science and Technology, Naka, Ibaraki 311-0193, Japan 8 Consorzio CREATE, Via Claudio 21, 80125 Napoli, Italy 9 Laboratorio Nacional de Fusión, CIEMAT, Madrid, Spain 10 NCSR ‘Demokritos’ 153 10, Agia Paraskevi Attikis, Greece 11 NRC Kurchatov Institute, 1 Kurchatov Square, Moscow 123182, Russia 12 Institute for Plasma Science and Technology, CNR, via R. Cozzi 53, 20125 Milano, Italy 13 ITER Organization, Route de Vinon-sur-Verdon, CS 90 046, 13067 Saint Paul Lez Durance Cedex, France 14 Universidad Nacional de Educacion a Distancia, Dept Ingn Energet, Calle Juan del Rosal 12, E-28040 Madrid, Spain 15 Troitsk Insitute of Innovating and Thermonuclear Research (TRINITI), Troitsk 142190, Moscow Region, Russia 16 Department of Physics and Astronomy, Uppsala University, SE-75120 Uppsala, Sweden 17 Dip.to Fusione e Tecnologie per la Sicurezza Nucleare, ENEA C. R. Frascati, via E. Fermi 45, 00044 Frascati (Roma), Italy 18 Max-Planck-Institut für Plasmaphysik, D-85748 Garching, Germany 19 National Institute for Fusion Science, Oroshi, Toki, Gifu 509-5292, Japan 20 MIT Plasma Science and Fusion Center, Cambridge, MA 02139, United States of America 21 Universidad Politécnica de Madrid, Grupo I2A2, Madrid, Spain 22 Centre for Energy Research, POB 49, H-1525 Budapest, Hungary 23 Consorzio RFX, Corso Stati Uniti 4, 35127 Padova, Italy 24 University of Latvia, 19 Raina Blvd., Riga, LV 1586, Latvia 25 Department of Electrical and Electronic Engineering, University of Cagliari, Piazza d’Armi 09123 Cagliari, Italy 26 National Technical University of Athens, Iroon Politechniou 9, 157 73 Zografou, Athens, Greece 27 CEA, IRFM, F-13108 Saint Paul Lez Durance, France 28 Dipartimento di Ingegneria Elettrica Elettronica e Informatica, Università degli Studi di Catania, 95125 Catania, Italy 29 Oak Ridge National Laboratory, Oak Ridge, TN 37831, TN, United States of America 30 EUROfusion Programme Management Unit, Culham Science Centre, Culham, OX14 3DB, United Kingdom of Great Britain and Northern Ireland 31 Karlsruhe Institute of Technology, PO Box 3640, D-76021 Karlsruhe, Germany 32 General Atomics, PO Box 85608, San Diego, CA 92186-5608, United States of America 33 Department of Physics, University of Basel, Switzerland 34 Fusion Plasma Physics, EECS, KTH Royal Institute of Technology, SE-10044 Stockholm, Sweden 35 Institut Jean Lamour, UMR 7198, CNRS-Université de Lorraine, 54500 Vandoeuvre-lès-Nancy, France 36 Max-Planck-Institut für Plasmaphysik, Teilinsitut Greifswald, D-17491 Greifswald, Germany 37 Maritime University of Szczecin Faculty of Marine Engineering, Waly Chrobrego 1-2, 70-500 Szczecin, Poland 38 Institute of Nuclear Physics, Radzikowskiego 152, 31-342 Kraków, Poland 39 Institute of Plasma Physics of the CAS, Za Slovankou 1782/3, 182 00 Praha 8, Czech Republic 40 Ecole Polytechnique Fédérale de Lausanne (EPFL), Swiss Plasma Center (SPC), CH-1015 Lausanne, Switzerland 41 University of Wisconsin-Madison, Madison, WI 53706, United States of America 42 Magnetic Sensor Laboratory, Lviv Polytechnic National University, Lviv, Ukraine 43 Princeton Plasma Physics Laboratory, James Forrestal Campus, Princeton, NJ 08543, NJ, United States of America 44 Forschungszentrum Jülich GmbH, Institut für Energie- und Klimaforschung, Plasmaphysik, 52425 Jülich, Germany 45 Université Cote d’Azur, CNRS, Inria, LJAD, Parc Valrose, 06108 Nice Cedex 02, France 46 Ruder Boskovic Institute, Bijenicka 54, 10000 Zagreb, Croatia 47 The National Institute for Optoelectronics, Magurele-Bucharest, Romania 48 Mechanics, SCI, KTH SE-100 44 Stockholm, Sweden 49 Fourth State Research, 503 Lockhart Dr, Austin, TX, United States of America 50 University of Texas at Austin, Institute for Fusion Studies, Austin, TX 78712, United States of America 51 Laboratory for Plasma Physics LPP-ERM/KMS, B-1000 Brussels, Belgium 52 University of Tuscia, DEIM, Via del Paradiso 47, 01100 Viterbo, Italy 53 Università di Roma Tor Vergata, Via del Politecnico 1, Roma, Italy 54 Aix-Marseille University, CNRS, PIIM, UMR 7345, 13013 Marseille, France 55 Instituto de Física, Universidade de Sao Paulo, Rua do Mat˜ao Travessa R Nr.187, CEP 05508-090 Cidade Universitária, Sao Paulo, Brasil 56 University of Milano-Bicocca, Piazza della Scienza 3, 20126 Milano, Italy 57 Centre for Fusion, Space and Astrophysics, University of Warwick, Coventry, CV4 7AL, United Kingdom of Great Britain and Northern Ireland 58 Institute of Plasma Physics and Laser Microfusion, Hery 23, 01-497 Warsaw, Poland 59 Aalto University, PO Box 14100, FIN-00076 Aalto, Finland 60 FOM Institute DIFFER, Eindhoven, The Netherlands 61 Warsaw University of Technology, 02-507 Warsaw, Poland 62 Astrophysics Research Centre, School of Mathematics and Physics, Queen’s University, Belfast, BT7 1NN, United Kingdom of Great Britain and Northern Ireland 63 The National Institute for Laser, Plasma and Radiation Physics, Magurele-Bucharest, Romania 64 Department of Applied Physics, Ghent University, 9000 Ghent, Belgium 65 Slovenian Fusion Association (SFA), Jozef Stefan Institute, Jamova 39, SI-1000 Ljubljana, Slovenia 66 The National Institute for Cryogenics and Isotopic Technology, Ramnicu Valcea, Romania 67 Dublin City University (DCU), Dublin, Ireland 68 University of California at San Diego, La Jolla, CA 92093, United States of America 69 EUROfusion Programme Management Unit, Boltzmannstr. 2, 85748 Garching, Germany 70 UNED, Dpto. Informática y Automática, Madrid, Spain 71 National Science Center ‘Kharkov Institute of Physics and Technology’, Akademichna 1, Kharkiv 61108, Ukraine 72 York Plasma Institute, Department of Physics, University of York, York, YO10 5DD, United Kingdom of Great Britain and Northern Ireland 73 Department of Physics, Chalmers University of Technology, SE-41296 Gothenburg, Sweden 74 Department of Space, Earth and Environment, Chalmers University of Technology, SE-41296 Gothenburg, Sweden 75 European Commission, B-1049 Brussels, Belgium 76 University of Tennessee, Knoxville, TN 37996, TN, United States of America 77 Universitat Politècnica de Catalunya, Barcelona, Spain 78 Barcelona Supercomputing Center, Barcelona, Spain 79 Universidad de Sevilla, Sevilla, Spain 80 Aix-Marseille University, CNRS, IUSTI, UMR 7343, 13013 Marseille, France 81 Dipartimento di Ingegneria Astronautica, Elettrica ed Energetica, SAPIENZA Università di Roma, Via Eudossiana 18, 00184 Roma, Italy 82 Institute for Nuclear Research, Prospekt Nauky 47, Kyiv 03680, Ukraine 83 Studiecentrum voor Kernenergie—Centre d’Etude de l’Energie Nucléaire, Boeretang 200, 2400 Mol, Belgium 84 University of Toyama, Toyama, 930-8555, Japan 85 University of California, Irvine, Irvine, California 92697, United States of America 86 Department of Physics, Technical University of Denmark, Bldg 309, DK-2800 Kgs Lyngby, Denmark 87 Institution ‘Project Center ITER’, Moscow, 123182, Russia 88 Faculty of Mathematics, Department of Experimental Physics, Physics and Informatics Comenius University Mlynska dolina F2, 84248 Bratislava, Slovakia 89 University College Cork (UCC), Cork, Ireland 90 Institute of Physics, Opole University, Oleska 48, 45-052 Opole, Poland 91 Daegu University, Jillyang, Gyeongsan, Gyeongbuk 712-174, Republic of Korea 92 Department of Nuclear Engineering, Seoul National University, Seoul, Republic of Korea 93 Fusion for Energy Joint Undertaking, Josep Pl. 2, Torres Diagonal Litoral B3, 08019, Barcelona, Spain 94 PELIN LLC, 27a, Gzhatskaya Ulitsa, Saint Petersburg, 195220, Russia 95 Arizona State University, Tempe, AZ, United States of America 96 Politecnico di Torino, Corso Duca degli Abruzzi 24, I-10129 Torino, Italy 97 ICREA and Barcelona Supercomputing Center, Barcelona, Spain 98 Universidad Complutense de Madrid, Madrid, Spain 99 Istituto dei Sistemi Complessi—CNR and Dipartimento di Energia—Politecnico di Torino, C.so Duca degli Abruzzi 24, 10129 Torino, Italy 100 Eindhoven University of Technology, The Netherlands 101 Purdue University, 610 Purdue Mall, West Lafayette, IN 47907, United States of America 102 Department of Material Science, Shimane University, 1060 Nishikawatsu, Matsue, 690-8504, Japan 103 Faculty of Nuclear Sciences and Physical Engineering, Czech Technical University in Prague, Brehová 78/7, 115 19 Praha 1, Czech Republic 104 College of William and Mary, Williamsburg, VA 23185, United States of America 105 University of California, 1111 Franklin St., Oakland, CA 94607, United States of America 106 University of Strathclyde, Glasgow, G4 0NG, United Kingdom of Great Britain and Northern Ireland 107 Kindai University, Higashi-Osaka, 577-8502, Japan 108 Shizuoka University, Shizuoka, 422-8529, Japan 109 Rudolf Peierls Centre for Theoretical Physics, University of Oxford, Oxford OX1 3PU, United Kingdom of Great Britain and Northern Ireland 110 Columbia University, New York, NY 10027, United States of America 111 Dipartimento di Fisica ‘G. Galilei’, Universita’ degli Studi di Padova, Padova, Italy 112 Space and Plasma Physics, EECS, KTH SE-100 44 Stockholm, Sweden 113 University of Ioannina, Panepistimioupoli Ioanninon, PO Box 1186, 45110 Ioannina, Greece 114 Universidade do Porto, Faculdade de Engenharia, 4200-465 Porto, Portugal 115 The University of Tokyo, Kashiwa, Chiba, 277-0882, Japan 116 Lithuanian Energy Institute, Breslaujos g. 3, LT-44403, Kaunas, Lithuania 117 HRS Fusion, West Orange, NJ, United States of America 118 Ibaraki University Graduate School of Science and Engineering, Mito, Ibaraki 310-8512, Japan 119 Technische Universität Wien, Fusion@ÖAW Österreichische Akademie der Wissenschaften (ÖAW), Austria
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Next Generation Driver for Attosecond and Laser-plasma Physics

  • Rivas, D. E.
  • Borot, A.
  • Cardenas, D. E.
  • Marcus, G.
  • Gu, X.
  • Herrmann, D.
  • Xu, J.
  • Tan, J.
  • Kormin, D.
  • Ma, G.
  • Dallari, W.
  • Tsakiris, G. D.
  • Földes, I. B.
  • Chou, S.-w.
  • Weidman, M.
  • Bergues, B.
  • Wittmann, T.
  • Schröder, H.
  • Tzallas, P.
  • Charalambidis, D.
  • Razskazovskaya, O.
  • Pervak, V.
  • Krausz, F.
  • Veisz, L.
The observation and manipulation of electron dynamics in matter call for attosecond light pulses, routinely available from high-order harmonic generation driven by few-femtosecond lasers. However, the energy limitation of these lasers supports only weak sources and correspondingly linear attosecond studies. Here we report on an optical parametric synthesizer designed for nonlinear attosecond optics and relativistic laser-plasma physics. This synthesizer uniquely combines ultra-relativistic focused intensities of about 1020 W/cm2 with a pulse duration of sub-two carrier-wave cycles. The coherent combination of two sequentially amplified and complementary spectral ranges yields sub-5-fs pulses with multi-TW peak power. The application of this source allows the generation of a broad spectral continuum at 100-eV photon energy in gases as well as high-order harmonics in relativistic plasmas. Unprecedented spatio-temporal confinement of light now permits the investigation of electric-field-driven electron phenomena in the relativistic regime and ultimately the rise of next-generation intense isolated attosecond sources., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Overview of the JET preparation for deuterium-tritium operation with the ITER like-wall

  • Joffrin, Emmanuel
  • Abduallev, Sadrilla
  • Abhangi, Mitul
  • Futatani, Shimpei|||0000-0001-5742-5454
  • Gallart, Daniel|||0000-0003-1663-3550
  • Gutiérrez, Albert|||0000-0002-6242-9414
  • Mantsinen, Mervi Johanna
  • Saez Pous, Xavier|||0000-0003-1989-9485
  • Rakha, Allah|||0000-0002-0881-6990
For the past several years, the JET scientific programme (Pamela et al 2007 Fusion Eng. Des.82 590) has been engaged in a multi-campaign effort, including experiments in D, H and T, leading up to 2020 and the first experiments with 50%/50% D–T mixtures since 1997 and the first ever D–T plasmas with the ITER mix of plasma-facing component materials. For this purpose, a concerted physics and technology programme was launched with a view to prepare the D–T campaign (DTE2). This paper addresses the key elements developed by the JET programme directly contributing to the D–T preparation. This intense preparation includes the review of the physics basis for the D–T operational scenarios, including the fusion power predictions through first principle and integrated modelling, and the impact of isotopes in the operation and physics of D–T plasmas (thermal and particle transport, high confinement mode (H-mode) access, Be and W erosion, fuel recovery, etc). This effort also requires improving several aspects of plasma operation for DTE2, such as real time control schemes, heat load control, disruption avoidance and a mitigation system (including the installation of a new shattered pellet injector), novel ion cyclotron resonance heating schemes (such as the three-ions scheme), new diagnostics (neutron camera and spectrometer, active Alfvèn eigenmode antennas, neutral gauges, radiation hard imaging systems...) and the calibration of the JET neutron diagnostics at 14 MeV for accurate fusion power measurement. The active preparation of JET for the 2020 D–T campaign provides an incomparable source of information and a basis for the future D–T operation of ITER, and it is also foreseen that a large number of key physics issues will be addressed in support of burning plasmas., This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014–2018 and 2019–2020 under grant agreement No. 633053