Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tunable Self-Assembly of YF3 Nanoparticles by Citrate-Mediated Ionic Bridges

  • Martínez Esaín, Jordi
  • Faraudo, Jordi
  • Puig Molina, Teresa
  • Obradors, Xavier
  • Ros, Josep
  • Ricart, Susagna
  • Yáñez, Ramón
Ligand-to-surface interactions are critical factors in surface and interface chemistry to control the mechanisms governing nanostructured colloidal suspensions. In particular, molecules containing carboxylate moieties (such as citrate anions) have been extensively investigated to stabilize metal, metal oxide, and metal fluoride nanoparticles. Using YF3 nanoparticles as a model system, we show here the self-assembly of citrate-stabilized nanostructures (supraparticles) with a size tunable by temperature. Results from several experimental techniques and molecular dynamics simulations show that the self-assembly of nanoparticles into supraparticles is due to ionic bridges between different nanoparticles. These interactions were caused by cations (e.g., ammonium) strongly adsorbed onto the nanoparticle surface that also interact strongly with nonbonded citrate anions, creating ionic bridges in solution between nanoparticles. Experimentally, we observe self-assembly of nanoparticles into supraparticles at 25 and 100 °C. Interestingly, at high temperatures (100 °C), this citrate-bridge self-assembly mechanism is more efficient, giving rise to larger supraparticles. At low temperatures (5 °C), this mechanism is not observed, and nanoparticles remain stable. Molecular dynamics simulations show that the free energy of a single citrate bridge between nanoparticles in solution is much larger than the thermal energy and in fact is much larger than typical adsorption free energies of ions on colloids. Summarizing our experiments and simulations, we identify as key aspects of the self-assembly mechanism the requirement of NPs with a surface able to adsorb anions and cations and the presence of multidentate ions in solution. This indicates that this new ion-mediated self-assembly mechanism is not specific of YF3 and citrate anions, as supported by preliminary experimental results in other systems., This work was supported by Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496), CONSOLIDER Excellence Network (MAT2015-68994-REDC), COACHSUPENERGY project (MAT2014-51778-C2-1-R, co-financed by the European Regional Development Fund) and SUPERINKS project (RTC-2015-3640-3, cofinanced by the European Regional Development Fund). We also thank support from the European Union for EUROTAPES project (FP7-NMP-Large-2011-280432) and ULTRASUPERTAPE project (H2020 ERC-2014-ADG-669504) and from the Catalan Government with 2014-SGR-753 and Xarmae. The authors acknowledge the technical support of Servei de Microscòpia, NMR Service and Servei de Difracció de Raigs-X, all at the UAB, to the Soft Materials Service and Dr. Judit Oró (Microscope Service) at the ICMAB-CSIC, Dr. Guillaume Sauthier for his support in XPS analysis, and Dr. Eduardo Solano for his scientific discussions. J.M.E. acknowledges the PIF predoctoral fellowship from the Universitat Autònoma de Barcelona. J.F. thanks CESGA Supercomputing Center for technical support and the use of computational resources. We thank Justin J. Charette for help with English usage., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Epitaxial YBa2Cu3O7−x nanocomposite films and coated conductors from BaMO3 (M = Zr, Hf) colloidal solutions

  • Obradors, Xavier
  • Puig Molina, Teresa
  • Li, Ziliang
  • Pop, Cornelia
  • Mundet, Bernat
  • Chamorro, Natalia
  • Vallés, Ferran
  • Coll, Mariona
  • Ricart, Susagna
  • Villarejo, Bohores
  • Pino, Flavio
  • Palau, Anna
  • Gázquez, Jaume
  • Ros, Josep
  • Usoskin, Alexander
Superconducting nanocomposites are the best material choice to address the performance required in power applications and magnets working under high magnetic fields. However, it is still challenging to sort out how to achieve the highest superconducting performance using attractive and competitive manufacturing processes. Colloidal solutions have been recently developed as a novel and very promising low cost route to manufacture nanocomposite coated conductors. Well dispersed and stabilized preformance nanoparticle solutions are first prepared with high concentrations and then mixed with the YBa2Cu3O7 metalorganic precursor solutions to generate colloidal solutions to grow the nanocomposite films. Here we demonstrate, for the first time, that non-reactive BaZrO3 and BaHfO3 perovskite preformed nanoparticles are suitable for growing high quality thin and thick films, and coated conductors with a homogeneous distribution and controlled particle size using this fabrication method. Additionally, we extend the nanoparticle content of the nanocomposites up to 20%–25% mol without any degradation of the superconducting properties. Thick nanocomposite films, up to 0.8 μm, have been prepared with a single deposition of low-fluorine solutions using an ink jet printing dispenser and we demonstrate that the preformed nanoparticles display only a very limited coarsening during the growth process and so high critical current densities J c (B) under high magnetic fields. These films show the highest critical currents achieved so far based on the colloidal solution approach, I c = 220 A/cm-w at 77 K and self-field, and they still have a high potential for further increase in the film thickness. Finally, we also show that nanocomposite YBa2Cu3O7–BaZrO3 coated conductors based on an alternating beam assisted deposited YSZ buffer layer on stainless steel metallic substrates can be developed based on these novel colloidal solutions. Non-reactive preformed oxide perovskite nanoparticles are therefore very promising elements to further advance the colloidal solution approach in the implementation of low cost and high performance coated conductors for high magnetic field applications., All authors acknowledge the EU (EU-FP7 NMP-LA-2012-280432 EUROTAPES project), MINECO (COACHSUPENERGY, MAT2014-51778-C2-1-R and SUPERINKS, RTC-2015-3640-3) and Generalitat de Catalunya (2014SGR 753 and Xarmae). ICMAB authors acknowledge the Center of Excellence award Severo Ochoa SEV-2015-0496. TEM microscopy work was conducted in the Catalan Institute of Nanoscience and Nanotechnology (ICN2). Authors acknowledge the ICN2 Electron Microscopy Division for offering access to their instruments and expertise. Part of the STEM microscopy work was conducted in 'Laboratorio de Microscopias Avanzadas' at the Instituto de Nanociencia de Aragon-Universidad de Zaragoza. Authors acknowledge the LMA-INA for offering access to their instruments and expertise. JG and MC also acknowledge the Ramon y Cajal program (RYC-2012-11709 and RYC-2013-12448, respectively). ZL and BM acknowledge the China Scholarship Council (CSC) and F I MINECO for fellowships, respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tailoring the Synthesis of LnF3 (Ln = La–Lu and Y) Nanocrystals via Mechanistic Study of the Coprecipitation Method

  • Martínez Esaín, Jordi
  • Ros, Josep
  • Faraudo, Jordi
  • Ricart, Susagna
  • Yáñez, Ramón
Here, 15 LnF3 nanocrystals are synthesized using coprecipitation method with citrate stabilization to allow the fast, easy, and reproducible synthesis of several nanoscaled structures in water. General trends related to the behavior of LnF3 nanocrystals are highlighted due to their broad range of application in several fields (e.g., medical applications). The same nature for all Ln3+ cations is expected due to the internal role of f orbitals. However, we found that the use of different lanthanide elements is crucial in the final size, shape, assembly, and crystalline structure. In addition, the decrease of the cation size of the lanthanide series changes the behavior of these compounds, resulting in hexagonal, orthorhombic, and cubic crystalline structures. In addition, we are able to tune the cubic crystalline phase to pure orthorhombic by modifying the pH of the system using HBF4 instead of tetramethylammonium citrate. Via 11B NMR, we demonstrated the mechanism of HBF4 as fluorinating agent if an additional source of F– is not added during the synthesis. 1H NMR and IR techniques were performed to unravel the picture of the surface chemistry of the two representative metal cations (Y and La). Finally, HRTEM and SAED were performed to uncover the shape of the obtained nanocrystals and the preferential orientation of the assembled particles, giving crucial information on the involved mechanisms. This study reveals not only the dependence of the crystalline structure on the used metal and pH but also ability to achieve LnF3 assembled particles depending on the final shape and temperature., This work was supported by Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496), CONSOLIDER Excellence Network (MAT2015-68994-REDC), COACHSUPENERGY project (MAT2014-51778-C2-1-R, cofinanced by the European Regional Development Fund), and SUPERINKS project (RTC-2015-3640-3, cofinanced by the European Regional Development Fund). We also acknowledge the support from the European Union for EUROTAPES project (FP7-NMP-Large-2011-280432) and from the Catalan Government with 2014-SGR-753 and Xarmae. The authors acknowledge the technical support of Servei de Microscòpia, NMR Service, and Servei de Difracció de Raigs-X, all at the UAB. Also, the support of Dr. Judit Oró from Microscopy Service and Dr. Anna Crespi from X-ray Diffraction Service at the ICMAB-CSIC is acknowledged. Finally, J.M.E. acknowledges the PIF predoctoral fellowship from the Universitat Autònoma de Barcelona. We thank Justin J. Charette for help with English usage., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Singular spectrum analysis filtering and Fourier inversion: an efficient and fast way to improve resolution and quality of current density maps with low-cost Hall scanning systems

  • Amorós, Jaume
  • Duran, Arnau
  • Carrera, Miquel
  • López, Josep
  • Granados, Xavier
We provide a Biot–Savart inversion scheme that, for any two-dimensional, or bulk with planar crystallization, high-temperature superconducting (HTS) sample, determines current density maps with a higher resolution and accuracy than previous procedures and at a fraction of its computational cost. The starting point of our scheme is a Hall scanning microscopy map of the out-of-plane component of the magnetic field generated by the current. Such maps are noisy in scans of real samples with commercial-grade equipment, and their error is the limiting factor in any Biot–Savart inversion scheme. The main innovation of our proposed scheme is a singular spectrum analysis (SSA) filtering of the Hall probe maps, which cancels measurement errors such as noise or drifts without introducing any artifacts in the field map. The SSA filtering of the Hall probe data is so successful in this task that the resulting magnetic field map does not require an overdetermined QR inversion, allowing Fourier inversion of the Biot–Savart problem. Our implementation of SSA filtering of the Hall scan measurements, followed by Biot–Savart inversion using the fast Fourier transform (FFT), is applied to both simulations and real samples of HTS tape stacks. The algorithm works in cases where ill conditioning ruled out the application of Fourier inversion, and achieves a finer resolution for a fraction of the cost of the QR inversion used to date. The computation passes physical and statistical validity tests in all cases, and in three-dimensional samples it is shown to yield the average, with a depth-dependent weight, of the current density circulating in the different layers of the sample., We acknowledge the financial support from the Spanish Ministry of Economy and Competitiveness through the Severo Ochoa Programme (SEV-2015-0496), CONSOLIDER Excellence Network (MAT2015-68994-REDC), COACHSUPENERGY project (MAT2014-51778-C2-1-R, co-financed by FEDER), GAP project (MTM2015-69135-P) and SUPERINKS project (RTC-2015-3640-3, co-financed by FEDER); the European Union for the FASTGRID project (H2020-NMBP-18-2016-IA-72109) and WPMAG 5 (H2020-EUROfusion); and the Catalan Government with 2017-SGR-932, 2014-SGR-753 and Xarmae., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Hybrid approach to obtain high-quality BaMO3 perovskite nanocrystals

  • Chamorro, Natalia
  • Martínez Esaín, Jordi
  • Puig Molina, Teresa
  • Obradors, Xavier
  • Ros, Josep
  • Yáñez, Ramón
  • Ricart, Susagna
A novel hybrid solvothermal approach for perovskite nanocrystal formation via accurate control of the hydrolytic process is reported. This new synthetic methodology sets a whole general route to successfully tune the sizes of high-quality BaMO3 (M = Ti4+, Zr4+, and Hf4+) perovskite nanocrystals. Purely cubic-phase nanocrystals (stable in alcohol media) were obtained using controlled water amounts, combining the well-known aqueous sol–gel process with the classic solvothermal method. Exhaustive optimizations revealed feasibility of a fast (1 hour) and reproducible synthesis with small variations in the crystal size or agglomeration parameters. The study also reveals water content as the pivotal factor to achieve this wide range of sizes through a controlled hydrolytic step. Finally, the study of the hydrolytic process made it possible to shed some light on mechanistic insights of this synthetic route., This work was supported by Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496), CONSOLIDER Excellence Network (MAT2015-68994-REDC), COACHSUPENERGY project (MAT2014-51778-C2-1-R, cofinanced by the European Regional Development Fund) and SUPERINKS project (RTC-2015-3640-3, cofinanced by the European Regional Development Fund). We also thank support from the European Union for EUROTAPES project (FP7-NMP-Large-2011-280432) and ULTRASUPERTAPE project (H2020 ERC-2014-ADG-669504) and from the Catalan Government with 2014-SGR-753 and Xarmae. The authors acknowledge the technical support of Servei de Microscópia, and Servei de Difracció de Raigs- X, all at the UAB, and Dr Judith Oró (Microscope Service) at the ICMAB-CSIC, Dr Guillaume Sauthier for his support in XPS analysis. NCG acknowledge the PIF predoctoral fellowship from the Universitat Autònoma de Barcelona., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Inkjet-printed chemical solution Y₂O₃ layers for planarization of technical substrates

  • Vilardell, Marta
  • Fornell Beringues, Jordina|||0000-0002-0909-3843
  • Sort, Jordi|||0000-0003-1213-3639
  • Vlad, Roxana
  • Fernández, Juan Carlos
  • Puig, Joaquim|||0000-0003-0600-1023
  • Usoskin, Alexander
  • Palau, Anna|||0000-0002-2217-164X
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
  • Obradors, Xavier|||0000-0003-4592-7718
  • Calleja, Ana
The implementation of the Chemical Solution Deposition (CSD) methodology with 23 the Drop on Demand (DoD) inkjet printing (IJP) technology has been successfully employed to 24 develop a Solution Deposition Planarization (SDP) method. We have used nanocrystalline yttrium 25 oxide (Y₂O₃) to decrease the roughness of technical metallic substrates by filling the surface 26 imperfections and thus avoiding costly polishing steps. This alternative process represents an 27 outstanding methodology to reduce the final cost of the 2G coated conductors manufacturing. 28 Two Y₂O₃ metalorganic precursor inks formulations were successfully developed and tested to 29 obtain surfaces as smooth as possible with adequate mechanical properties to hold the internal 30 stresses developed during the subsequent layers growth. 31 By using these inks as precursors for IJP and after a proper tuning of the rheological and 32 wetting parameters, we firstly obtained short length uniform 100nm-thick Y₂O₃-SDP films on 33 unpolished stainless steel substrate from Bruker HTS. The scalability of the reel to reel (R2R)-IJP 34 process to 100m is then demonstrated on metallic substrates as well. A complete characterization of 35 the prepared short and long length SDP-Y₂O₃ inkjet-printed layers was carried out by optical 36 microscopy, FIB-SEM (Focus Ion Beam coupled to Scanning Electron Microscopy), XRD (X-Ray 37 Diffraction), AFM (Atomic Force Microscopy), reflectometry and nanoindentation techniques. Then, 38 the morphology, thickness, crystallinity and mechanical properties were evaluated, together with 39 the surface roughness in order to assess the resulting layer planarity. The impact of planarity was 40 additionally studied via growth of biaxially textured buffer layers as well as further functional 41 layers. 1.1µm-thick YSZ layers with in-plane textures better than the SS polished reference were 42 successfully deposited on top of the 100 nm SDP-Y2O3 films yielding 50% of Ic in contrast to the 43 standard reference.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Tunable Self-Assembly of YF Nanoparticles by Citrate-Mediated Ionic Bridges

  • Martínez-Esaín, Jordi|||0000-0002-8420-8559
  • Faraudo, Jordi|||0000-0002-6315-4993
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
  • Obradors, Xavier|||0000-0003-4592-7718
  • Ros i Badosa, Josep|||0000-0002-2391-2403
  • Ricart, Susagna
  • Yáñez, Ramón|||0000-0002-2021-0924
Ligand-to-surface interactions are critical factors in surface and interface chemistry to control the mechanisms governing nanostructured colloidal suspensions. In particular, molecules containing carboxylate moieties (such as citrate anions) have been extensively investigated to stabilize metal, metal oxide, and metal fluoride nanoparticles. Using YF nanoparticles as a model system, we show here the self-assembly of citrate-stabilized nanostructures (supraparticles) with a size tunable by temperature. Results from several experimental techniques and molecular dynamics simulations show that the self-assembly of nanoparticles into supraparticles is due to ionic bridges between different nanoparticles. These interactions were caused by cations (e.g., ammonium) strongly adsorbed onto the nanoparticle surface that also interact strongly with nonbonded citrate anions, creating ionic bridges in solution between nanoparticles. Experimentally, we observe self-assembly of nanoparticles into supraparticles at 25 and 100 °C. Interestingly, at high temperatures (100 °C), this citrate-bridge self-assembly mechanism is more efficient, giving rise to larger supraparticles. At low temperatures (5 °C), this mechanism is not observed, and nanoparticles remain stable. Molecular dynamics simulations show that the free energy of a single citrate bridge between nanoparticles in solution is much larger than the thermal energy and in fact is much larger than typical adsorption free energies of ions on colloids. Summarizing our experiments and simulations, we identify as key aspects of the self-assembly mechanism the requirement of NPs with a surface able to adsorb anions and cations and the presence of multidentate ions in solution. This indicates that this new ion-mediated self-assembly mechanism is not specific of YF and citrate anions, as supported by preliminary experimental results in other systems.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Hybrid approach to obtain high-quality BaMO perovskite nanocrystals

  • Chamorro, Natalia|||0000-0002-9531-1869
  • Martínez-Esaín, Jordi|||0000-0002-8420-8559
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
  • Obradors, Xavier|||0000-0003-4592-7718
  • Ros i Badosa, Josep|||0000-0002-2391-2403
  • Yáñez, Ramón|||0000-0002-2021-0924
  • Ricart, Susana|||0000-0003-4196-2081
A novel hybrid solvothermal approach for perovskite nanocrystal formation via accurate control of the hydrolytic process is reported. This new synthetic methodology sets a whole general route to successfully tune the sizes of high-quality BaMO (M = Ti 4+, Zr 4+, and Hf 4+) perovskite nanocrystals. Purely cubic-phase nanocrystals (stable in alcohol media) were obtained using controlled water amounts, combining the well-known aqueous sol-gel process with the classic solvothermal method. Exhaustive optimizations revealed feasibility of a fast (1 hour) and reproducible synthesis with small variations in the crystal size or agglomeration parameters. The study also reveals water content as the pivotal factor to achieve this wide range of sizes through a controlled hydrolytic step. Finally, the study of the hydrolytic process made it possible to shed some light on mechanistic insights of this synthetic route. A novel hybrid solvothermal approach for perovskite nanocrystal formation via accurate control of the hydrolytic process is reported.