Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Torsional dependence of the critical current in 2G tapes

  • Sotelo, G. G.
  • Granados, X.
  • Carrera i Vilanova, Miquel
  • López López, José
Since the second-generation (2G) superconducting wires started to be produced in a large scale almost a decade ago, the quality of the materials manufactured has been continually improved. Every year, the manufacturers present new materials with better electrical properties, increasing the critical current density, critical magnetic field, and the total length produced with continuous homogeneity. The mechanical properties of the coated conductor should be taken into account since electro-dynamical forces appear in working conditions as stress in the cooling and heating processes. In applications such as fault-current limiters, superconducting magnetic energy storage, transformers, electromagnets, motors, cables, etc., the consideration of them is mandatory to the project of those devices. In this context, this paper studies the electrical and mechanical properties of 12-mm 2G wires samples under torsion without axial tension. Critical current is measured as a function on the torsion angle. Details of the experiment and their results are here presented., This work was supported in part by EU under the Project EU FP7-2013- ICT-609029 FORTISSIMO, Project EU-FP7 NMP-LA-2012-280432 EUROTAPES, Project Eurofusion PPPT-WPMAG 2014, and EU COST ACTIONS MP1201and MP1014; by MINECO under Grant RTC-2014-1740-3 and Grant MAT2014-51778-C2-1-R, by Generalitat de Catalunya (Xarmae), and by CNPq (Ciencia sem Fronteiras).
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

H-Formulation FEM Modeling of the Current Distribution in 2G HTS Tapes and Its Experimental Validation Using Hall Probe Mapping

  • Sotelo, G. G.
  • Carrera i Vilanova, Miquel
  • Granados, X.
One of the most widespread mathematical formulations applied to simulate the electromagnetic phenomena of coated conductor in the recent literature is the H one. However, the only validation of the model has been indirect by using measurements taken from the applications, as measurements of the energy losses in ac fields, forces developed in levitation systems or any other parameter related to a specific application. Direct validation of the calculation requires the observation of the local out of plane magnetic field over the surface of the sample and this is only accessible under magneto-optical observations and, in a larger scale and better dynamic range, by the Hall scanning microscopy. We propose here the experimental validation of the H-formulation by comparing the simulated results with measurements made by a Hall probe mapping in a second generation (2G) tape sample for several DC transported currents at 77 K. The paper presents a methodology to simulate the 2G tape by using only measured data obtained from a sample and its normalized J(B) experimental curves. Some boundary conditions that allow a faster convergence of the problem are investigated. Simulated results of the 2G tape modelled considering only the 1 μm HTS layer were compared with other that represent the most important layers of the coated conductor structure in the calculations. The simulated and measured results present a good agreement, proving that this model can calculate precisely the magnetic field and, hence, the current distribution in HTS samples., This work was supported in part by the followings grants: “Science Without Borders” from the Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq); by the European Agency (EU) through the Factories of the Future Resources, Technology, Infrastructure and Services for Simulation and Modelling (FORTISSIMO) Project under Grant EU FP7-2013-ICT-609029, the European Development of Superconducting Tapes (EUROTAPES) Project under Grant EU-FP7 NMP-LA-2012- 280432, the European Consortium for the Development of Fusion Energy (EUROfusion, PPPT-WPMAG 2014), and EU COST ACTIONS MP1201 and MP1014; by the Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D under Grant SEV-2015-0496, CONSOLIDER Excellence Network under Grant MAT2015- 68994-REDC, COACHSUPENERGY project under Grant MAT2014-56063- C2-1-R, co-financed by the European Regional Development Fund; by the Catalan Government under Grant 2014-SGR-753 and Xarmae.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Proposal of a novel design for linear superconducting motor using 2G tape stacks

  • Sotelo, G. G.
  • Sass, Felipe
  • Carrera i Vilanova, Miquel
  • López López, José
  • Granados, X.
This paper presents a new design for a su- perconducting linear motor (SLM). This SLM uses stacks of second-generation (2G) superconducting tapes, which are responsible for replacing yttrium barium copper oxide bulks. The proposed SLM may operate as a synchronous motor or as a hysteresis motor, depending on the load force magnitude. A small-scale linear machine prototype with 2G stacks was constructed and tested to investigate the proposed SLM topology. The stator traveling magnetic field wave was represented by several Nd-Fe-B permanent magnets. A relative movement was produced between the stator and the stack, and the force was measured along the displacement. This system was also simulated by the finite element method, in order to calculate the induced currents in the stack and determine the electromagnetic force. The H-formulation was used to solve the problem, and a power law relation was applied to take into account the intrin- sically nonlinearity of the superconductor. The simulated and measured results were in accordance. Simulated re- sults were extrapolated, proving to be an interesting tool to scale up the motor in future projects. The proposed motor presented an estimated force density of almost 500 N/kg, which is much higher than any linear motor., This work was supported in part by the following agencies: CNPq/CAPES/INERGE, CNPq—Ci ˆ encias sem Fronteiras, FAPERJ, Catalan Government 2014- SGR-753, CONSOLIDER Excellence Network MAT2014-56063-C2-1-R and MAT2015-68994-REDC, Eurofusion EU COST ACTIONS MP1201/ MP1014/PPPT-WPMAG 2014, EUROTAPES FP7-NMP-Large-2011- 280432, FORTISSIMO FP7-2013-ICT-609029, and Spanish Govern- ment Agencies—Severo Ochoa Programme Centres of Excellence in R&D. (Corresponding author: Guilherme G. Sotelo.)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Torsional Dependence of the Critical Current in 2G Tapes

  • Sotelo, Guilherme Gonçalves
  • Granados, Xavier
  • Carrera, Miquel
  • López López, Josep
Since the second generation (2G) superconducting wires started to be produced in a large scale almost a decade ago, the quality of the materials manufactured has been continually improved. Every year the manufacturers present new materials with better electrical properties, increasing the critical current density, critical magnetic field and the total length produced with continuous homogeneity. The mechanical properties of the coated conductor should be taken in account, since electro-dynamical forces appear in working conditions as stress in the cooling and heating processes. In applications as fault current limiters, SMES, transformers, electromagnets, motors, cables, etc., the consideration of them is mandatory to the project of those devices. In this context, the present work studies the electrical and mechanical properties of 12 mm 2G wires samples under torsion without axial tension. Critical current is measured as a function on the torsion angle. Details of the experiment and their results are here presented., This work was supported in part by EU (EU FP7-2013-ICT-609029 FORTISSIMO project, EU-FP7 NMP-LA-2012-280432 EUROTAPES project, Eurofusion PPPT-WPMAG 2014 and EU COST COST ACTIONS MP1201and MP1014), MINECO (RTC-2014-1740-3 and MAT2014-51778-C2-1-R), Generalitat de Catalunya (Xarmae) and to CNPq (Ciencia sem Fronteiras)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

H-Formulation FEM Modeling of the Current Distribution in 2G HTS Tapes and Its Experimental Validation Using Hall Probe Mapping

  • Sotelo, Guilherme Gonçalves
  • Carrera, Miquel
  • Granados, Xavier
One of the most widespread mathematical formulations applied to simulate the electromagnetic phenomena of coated conductor in the recent literature is the H one. However, the only validation of the model has been indirect by using measurements taken from the applications, as measurements of the energy losses in ac fields, forces developed in levitation systems or any other parameter related to a specific application. Direct validation of the calculation requires the observation of the local out of plane magnetic field over the surface of the sample and this is only accessible under magneto-optical observations and, in a larger scale and better dynamic range, by the Hall scanning microscopy. We propose here the experimental validation of the H-formulation by comparing the simulated results with measurements made by a Hall probe mapping in a second generation (2G) tape sample for several DC transported currents at 77 K. The paper presents a methodology to simulate the 2G tape by using only measured data obtained from a sample and its normalized J(B) experimental curves. Some boundary conditions that allow a faster convergence of the problem are investigated. Simulated results of the 2G tape modelled considering only the 1 μm HTS layer were compared with other that represent the most important layers of the coated conductor structure in the calculations. The simulated and measured results present a good agreement, proving that this model can calculate precisely the magnetic field and, hence, the current distribution in HTS samples., The authors would like to thank the Brazilian Agency CNPq for the grant “Science without Borders” and the financial supported given by the European agencies EU (EU FP7-2013-ICT-609029 FORTISSIMO project, EU-FP7 NMP-LA-2012-280432 EUROTAPES project, Eurofusion PPPT-WPMAG 2014 and EU COST ACTIONS MP1201 and MP1014), MINECO (RTC-2014-1740-3) and the financial support from Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496), CONSOLIDER Excellence Network (MAT2015-68994-REDC)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Proposal of a Novel Design for Linear Superconducting Motor Using 2G Tape Stacks

  • Gonçalves Sotelo, Ghilherme
  • Sass, Felipe
  • Carrera, Miquel
  • López López, Josep
  • Granados, Xavier
This manuscript presents a new design for superconducting linear motor (SLM). This SLM uses stacks of second generation (2G) superconducting tapes, which are responsible for replacing YBCO bulks. The proposed SLM may operate as a synchronous motor or as a hysteresis motor, depending on the load force magnitude. A small scale linear machine prototype with 2G stacks was constructed and tested to investigate the proposed SLM topology. The stator traveling magnetic field wave was represented by several Nd-Fe-B permanent magnets. A relative movement was produced between the stator and the stack, and the force was measured along the displacement. This system was also simulated by finite element method, in order to calculate the induced currents in the stack and determine the electromagnetic force. The H-formulation was used to solve the problem and a power law relation was applied to take into account the intrinsically nonlinearity of the superconductor. The simulated and measured results were in accordance. Simulated results were extrapolated, proving to be an interesting tool to scale up the motor in future projects. The proposed motor presented an estimated force density of almost 500 N/kg, which is much higher than any linear motor., The authors would like to thank the Brazilian Agency CNPq for the grant “Science without Borders” and the financial supported given by the: European Union agencies for the FORTISSIMO project FP7-2013-ICT-609029, EUROTAPES project FP7-NMP-Large-2011-280432, Eurofusion project PPPT-WPMAG 2014, and EU COST ACTIONS MP1201 and MP1014; Spanish Government agencies for Severo Ochoa Programme Centres of Excellence in R&D (SEV-2015-0496), CONSOLIDER Excellence Network (MAT2015-68994-REDC) and project MAT2014-56063-C2-1-R; Catalan Government for 2014-SGR-753., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

On a general implementation of h- and p-adaptive curl-conforming finite elements

  • Olm Serra, Marc
  • Badia, Santiago|||0000-0003-2391-4086
  • Martín Huertas, Alberto Francisco|||0000-0001-5751-4561
Edge (or Nédélec) finite elements are theoretically sound and widely used by the computational electromagnetics community. However, its implementation, especially for high order methods, is not trivial, since it involves many technicalities that are not properly described in the literature. To fill this gap, we provide a comprehensive description of a general implementation of edge elements of first kind within the scientific software project FEMPAR . We cover into detail how to implement arbitrary order (i.e., p-adaptive) elements on hexahedral and tetrahedral meshes. First, we set the three classical ingredients of the finite element definition by Ciarlet, both in the reference and the physical space: cell topologies, polynomial spaces and moments. With these ingredients, shape functions are automatically implemented by defining a judiciously chosen polynomial pre-basis that spans the local finite element space combined with a change of basis to automatically obtain a canonical basis with respect to the moments at hand. Next, we discuss global finite element spaces putting emphasis on the construction of global shape functions through oriented meshes, appropriate geometrical mappings, and equivalence classes of moments, in order to preserve the inter-element continuity of tangential components of the magnetic field. Finally, we extend the proposed methodology to generate global curl-conforming spaces on non-conforming hierarchically refined (i.e., h-adaptive) meshes with arbitrary order finite elements. Numerical results include experimental convergence rates to test the proposed implementation., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Simulation of high temperature superconductors and experimental validation

  • Olm Serra, Marc
  • Badia, Santiago|||0000-0003-2391-4086
  • Martín Huertas, Alberto Francisco|||0000-0001-5751-4561
In this work, we present a parallel, fully-distributed finite element numerical framework to simulate the low-frequency electromagnetic behaviour of superconducting devices, which efficiently exploits high performance computing platforms. We select the so-called H-formulation, which uses the magnetic field as a state variable. Nédélec elements (of arbitrary order) are required for an accurate approximation of the H-formulation for modelling electromagnetic fields along interfaces between regions with high contrast medium properties. An h-adaptive mesh refinement technique customized for Nédélec elements leads to a structured fine mesh in areas of interest whereas a smart coarsening is obtained in other regions. The composition of a tailored, robust, parallel nonlinear solver completes the exposition of the developed tools to tackle the problem. First, a comparison against experimental data is performed to show the availability of the finite element approximation to model the physical phenomena. Then, a selected state-of-the-art 3D benchmark is reproduced, focusing on the parallel performance of the algorithms., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

H-formulation FEM modeling of the current distribution in 2G HTS tapes and its experimental validation using hall probe mapping

  • Sotelo, G.G.
  • Carrera, Miquel
  • López López, José|||0000-0001-8023-1084
  • Granados García, Javier A.J.
One of the most widespread mathematical formulations applied to simulate the electromagnetic phenomena of coated conductor in the recent literature is the H-formulation. However, the only validation of the model has been indirect by using measurements taken from the applications, as measurements of the energy losses in ac fields, forces developed in levitation systems, or any other parameter related to a specific application. Direct validation of the calculation requires the observation of the local out-of-plane magnetic field over the surface of the sample, and it is only accessible under magneto-optical observations and, in a larger scale and better dynamic range, by the Hall scanning microscopy. We propose here the experimental validation of the H-formulation by comparing the simulated results with measurements made by a Hall probe mapping in a second-generation (2G) tape sample for several dc transported currents at 77 K. This paper presents a methodology to simulate the 2G tape by using only measured data obtained from a sample and its normalized J(B) experimental curves. Some boundary conditions that allow a faster convergence of the problem are investigated. Simulated results of the 2G tape modeled considering only the 1-mu m high-temperature superconductor (HTS) layer were compared with others that represent the most important layers of the coated conductor structure in the calculations. The simulated and measured results present a good agreement, proving that this model can calculate precisely the magnetic field and, hence, the current distribution in HTS samples.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Proposal of a novel design for linear superconducting motor using 2G tape stacks

  • Sotelo, G. G.
  • Sass, Felipe
  • Carrera i Vilanova, Miquel
  • López López, José
  • Granados, X.
This paper presents a new design for a su- perconducting linear motor (SLM). This SLM uses stacks of second-generation (2G) superconducting tapes, which are responsible for replacing yttrium barium copper oxide bulks. The proposed SLM may operate as a synchronous motor or as a hysteresis motor, depending on the load force magnitude. A small-scale linear machine prototype with 2G stacks was constructed and tested to investigate the proposed SLM topology. The stator traveling magnetic field wave was represented by several Nd-Fe-B permanent magnets. A relative movement was produced between the stator and the stack, and the force was measured along the displacement. This system was also simulated by the finite element method, in order to calculate the induced currents in the stack and determine the electromagnetic force. The H-formulation was used to solve the problem, and a power law relation was applied to take into account the intrin- sically nonlinearity of the superconductor. The simulated and measured results were in accordance. Simulated re- sults were extrapolated, proving to be an interesting tool to scale up the motor in future projects. The proposed motor presented an estimated force density of almost 500 N/kg, which is much higher than any linear motor., This work was supported in part by the following agencies: CNPq/CAPES/INERGE, CNPq—Ci ˆ encias sem Fronteiras, FAPERJ, Catalan Government 2014- SGR-753, CONSOLIDER Excellence Network MAT2014-56063-C2-1-R and MAT2015-68994-REDC, Eurofusion EU COST ACTIONS MP1201/ MP1014/PPPT-WPMAG 2014, EUROTAPES FP7-NMP-Large-2011- 280432, FORTISSIMO FP7-2013-ICT-609029, and Spanish Govern- ment Agencies—Severo Ochoa Programme Centres of Excellence in R&D. (Corresponding author: Guilherme G. Sotelo.)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Simulation of high temperature superconductors and experimental validation

  • Olm Serra, Marc
  • Badia, Santiago
  • Martín Huertas, Alberto Francisco
In this work, we present a parallel, fully-distributed finite element numerical framework to simulate the low-frequency electromagnetic behaviour of superconducting devices, which efficiently exploits high performance computing platforms. We select the so-called H-formulation, which uses the magnetic field as a state variable. Nédélec elements (of arbitrary order) are required for an accurate approximation of the H-formulation for modelling electromagnetic fields along interfaces between regions with high contrast medium properties. An h-adaptive mesh refinement technique customized for Nédélec elements leads to a structured fine mesh in areas of interest whereas a smart coarsening is obtained in other regions. The composition of a tailored, robust, parallel nonlinear solver completes the exposition of the developed tools to tackle the problem. First, a comparison against experimental data is performed to show the availability of the finite element approximation to model the physical phenomena. Then, a selected state-of-the-art 3D benchmark is reproduced, focusing on the parallel performance of the algorithms., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

H-formulation FEM modeling of the current distribution in 2G HTS tapes and its experimental validation using hall probe mapping

  • Sotelo, G.G.
  • Carrera, Miquel
  • López López, José
  • Granados García, Javier A.J.
One of the most widespread mathematical formulations applied to simulate the electromagnetic phenomena of coated conductor in the recent literature is the H-formulation. However, the only validation of the model has been indirect by using measurements taken from the applications, as measurements of the energy losses in ac fields, forces developed in levitation systems, or any other parameter related to a specific application. Direct validation of the calculation requires the observation of the local out-of-plane magnetic field over the surface of the sample, and it is only accessible under magneto-optical observations and, in a larger scale and better dynamic range, by the Hall scanning microscopy. We propose here the experimental validation of the H-formulation by comparing the simulated results with measurements made by a Hall probe mapping in a second-generation (2G) tape sample for several dc transported currents at 77 K. This paper presents a methodology to simulate the 2G tape by using only measured data obtained from a sample and its normalized J(B) experimental curves. Some boundary conditions that allow a faster convergence of the problem are investigated. Simulated results of the 2G tape modeled considering only the 1-mu m high-temperature superconductor (HTS) layer were compared with others that represent the most important layers of the coated conductor structure in the calculations. The simulated and measured results present a good agreement, proving that this model can calculate precisely the magnetic field and, hence, the current distribution in HTS samples., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

On a general implementation of h- and p-adaptive curl-conforming finite elements

  • Olm Serra, Marc
  • Badia, Santiago
  • Martín Huertas, Alberto Francisco
Edge (or Nédélec) finite elements are theoretically sound and widely used by the computational electromagnetics community. However, its implementation, especially for high order methods, is not trivial, since it involves many technicalities that are not properly described in the literature. To fill this gap, we provide a comprehensive description of a general implementation of edge elements of first kind within the scientific software project FEMPAR . We cover into detail how to implement arbitrary order (i.e., p-adaptive) elements on hexahedral and tetrahedral meshes. First, we set the three classical ingredients of the finite element definition by Ciarlet, both in the reference and the physical space: cell topologies, polynomial spaces and moments. With these ingredients, shape functions are automatically implemented by defining a judiciously chosen polynomial pre-basis that spans the local finite element space combined with a change of basis to automatically obtain a canonical basis with respect to the moments at hand. Next, we discuss global finite element spaces putting emphasis on the construction of global shape functions through oriented meshes, appropriate geometrical mappings, and equivalence classes of moments, in order to preserve the inter-element continuity of tangential components of the magnetic field. Finally, we extend the proposed methodology to generate global curl-conforming spaces on non-conforming hierarchically refined (i.e., h-adaptive) meshes with arbitrary order finite elements. Numerical results include experimental convergence rates to test the proposed implementation., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Torsional dependence of the critical current in 2G tapes

  • Sotelo, G. G.
  • Granados, X.
  • Carrera i Vilanova, Miquel
  • López López, José
Since the second-generation (2G) superconducting wires started to be produced in a large scale almost a decade ago, the quality of the materials manufactured has been continually improved. Every year, the manufacturers present new materials with better electrical properties, increasing the critical current density, critical magnetic field, and the total length produced with continuous homogeneity. The mechanical properties of the coated conductor should be taken into account since electro-dynamical forces appear in working conditions as stress in the cooling and heating processes. In applications such as fault-current limiters, superconducting magnetic energy storage, transformers, electromagnets, motors, cables, etc., the consideration of them is mandatory to the project of those devices. In this context, this paper studies the electrical and mechanical properties of 12-mm 2G wires samples under torsion without axial tension. Critical current is measured as a function on the torsion angle. Details of the experiment and their results are here presented., This work was supported in part by EU under the Project EU FP7-2013- ICT-609029 FORTISSIMO, Project EU-FP7 NMP-LA-2012-280432 EUROTAPES, Project Eurofusion PPPT-WPMAG 2014, and EU COST ACTIONS MP1201and MP1014; by MINECO under Grant RTC-2014-1740-3 and Grant MAT2014-51778-C2-1-R, by Generalitat de Catalunya (Xarmae), and by CNPq (Ciencia sem Fronteiras).
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

H-Formulation FEM Modeling of the Current Distribution in 2G HTS Tapes and Its Experimental Validation Using Hall Probe Mapping

  • Sotelo, G. G.
  • Carrera i Vilanova, Miquel
  • Granados, X.
One of the most widespread mathematical formulations applied to simulate the electromagnetic phenomena of coated conductor in the recent literature is the H one. However, the only validation of the model has been indirect by using measurements taken from the applications, as measurements of the energy losses in ac fields, forces developed in levitation systems or any other parameter related to a specific application. Direct validation of the calculation requires the observation of the local out of plane magnetic field over the surface of the sample and this is only accessible under magneto-optical observations and, in a larger scale and better dynamic range, by the Hall scanning microscopy. We propose here the experimental validation of the H-formulation by comparing the simulated results with measurements made by a Hall probe mapping in a second generation (2G) tape sample for several DC transported currents at 77 K. The paper presents a methodology to simulate the 2G tape by using only measured data obtained from a sample and its normalized J(B) experimental curves. Some boundary conditions that allow a faster convergence of the problem are investigated. Simulated results of the 2G tape modelled considering only the 1 μm HTS layer were compared with other that represent the most important layers of the coated conductor structure in the calculations. The simulated and measured results present a good agreement, proving that this model can calculate precisely the magnetic field and, hence, the current distribution in HTS samples., This work was supported in part by the followings grants: “Science Without Borders” from the Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq); by the European Agency (EU) through the Factories of the Future Resources, Technology, Infrastructure and Services for Simulation and Modelling (FORTISSIMO) Project under Grant EU FP7-2013-ICT-609029, the European Development of Superconducting Tapes (EUROTAPES) Project under Grant EU-FP7 NMP-LA-2012- 280432, the European Consortium for the Development of Fusion Energy (EUROfusion, PPPT-WPMAG 2014), and EU COST ACTIONS MP1201 and MP1014; by the Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D under Grant SEV-2015-0496, CONSOLIDER Excellence Network under Grant MAT2015- 68994-REDC, COACHSUPENERGY project under Grant MAT2014-56063- C2-1-R, co-financed by the European Regional Development Fund; by the Catalan Government under Grant 2014-SGR-753 and Xarmae.