Skip to main content

ESTUDIO DE LOS PROCESOS FISICOQUIMICOS INVOLUCRADOS EN EL FUNCIONAMIENTO DE DISPOSITIVOS ELECTRONICOS Y FOTONICOS ORGANICOS

PID2019-110305GB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2019
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE MALAGA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

RIUMA. Repositorio Institucional de la Universidad de Málaga
Publication Artículo científico (JournalArticle)

In silico design of 2D polymers containing truxene-based platforms: insights into their structural and electronic properties

  • Gámez-Valenzuela, Sergio
  • Echeverri, Marcelo
  • Gómez-Lor, Berta
  • Martínez, Jose I.
  • Ruiz-Delgado, María del Carmen
In the present work, we investigate two-dimensional (2D) conjugated polymers based on C3-symmetric truxene-based cores at the density functional theory (DFT) level. In total, 27 different 2D polymers have been exhaustively studied with the aim to explore the impact of the following effects on the electronic and charge-transport properties: (i) the nature of the conjugated platform, going from electron-rich truxene (Tx) and triindole (Tr) units to electron-deficient truxenone (To) cores, (ii) the spacing of the cores with different bridges, i.e., phenylene (Ph) or ethynylene (A) units, (iii) the linker position (2,7,12-substitution in the T2 polymers and 3,8,13-substitution in T3 polymers), and (iv) the increased number of p-bridges connecting the cores, from three linkers in T2 and T3 to six linkers in T2,3. To this end, we have carried out a large battery of DFT calculations on fragments extracted from the 2D polymers (dimers and trimers) as well as on the corresponding periodic 2D structures (infinite monolayers and self-assembled monolayers) using periodic boundary conditions. Our results show that simultaneous manipulation of the pore surface size and band-gap engineering together with charge- transport parameters can be achieved in these truxene-based 2D polymers by fine-tuning their structural features. The contributions of this study to the overall understanding of the structure–electronic property relationships of these semiconducting polymers and its correlation with available experimental work are highlighted. Our results provide interesting guidelines to design novel 2D materials with applications ranging from sensing to photocatalysis or electronics., MICINN (PID2019-110305GB-I00), Junta de Andalucıa (P09-FQM-4708, UMA18-FEDERJA-080), University of Málaga
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Microwave-assisted functionalization of carbon nanohorns with oligothiophene units with SERS activity

  • Iglesias, Daniel
  • Guerra, Javier
  • González-Cano, Rafael C.
  • Lopez Navarrete, Juan T.
  • Ruiz Delgado, M. Carmen
  • Vázquez, Ester
  • Herrero, M. Antonia
  • Lucío, María Isabel|||0000-0001-7404-352X
[EN] Carbon nanohorns have been functionalized with oligothiophene unitsviathe 1,3-dipolar cycloaddition reaction under microwave irradiation and solvent-free conditions. A dramatic Raman enhancement was found for one of the synthesized derivatives. Experimental andin silicostudies helped to understand the enhancement, attributed to the modification of electromagnetic fields upon functionalization at the tip of the nanostructures., This work was supported by the Iberdrola Foundation (CONV120313), the Spanish Ministerio de Economia y Competitividad (CTQ2017-88158-R), the Junta de Comunidades de Castilla-La Mancha (SBPLY/17/180501/000204) and FEDER-JCCM (UNCM13-1E-1663). The work at the University of Malaga was funded by the MICINN (PID2019-110305GB-I00) and Junta de Andalucia (P09FQM-4708) projects. M. I. L. acknowledges MINECO for her Juan de la Cierva-formacion grant (FJCI-2016-29593). The authors acknowledge the computer resources, technical expertise, and assistance provided by the Supercomputing and Bioinformatics centre of the University of Malaga.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Triplet formation inhibits amplified spontaneous emission in perylene-based polycyclic aromatic hydrocarbons

  • Moles Quintero, Sergio
  • Mira-Martínez, Jose C.
  • Zou, Ya
  • Díaz-García, Marcos
  • Boj, Pedro G.
  • Wu, Jishan
  • Díaz-García, María A.
  • Marín-Beloqui, Jose M.
  • Casado, Juan
  • Díaz-García, María A.|||/items/3b28d03f-511f-4a32-9ff4-d4a2e740834f
  • Boj, Pedro G.|||/items/996b5a34-1566-47d0-8e2d-7a34827a1167
Polycyclic Aromatic Hydrocarbons (PAHs) have demonstrated potential as active laser materials, showing good Amplified Stimulated Emission (ASE) properties. However, the molecular origin of their ASE properties is still unclear and depends on the particular compound. In this work we study the ASE properties of polystyrene films hosting three different perylene-based PAHs YZ-1, YZ-2 and YZ-3, where only YZ-3 has displayed ASE. Their molecular structure has been systematically changed to establish the connection between their molecular structure and their ASE properties. A complete spectroscopic study, with ground state and time-resolved techniques, show that, even at low yields, triplets play a critical role as a major loss mechanism. Their slow relaxation to ground state completely hinders the required unbalance of the S1 and S0 states for succesful ASE. Quantum chemical calculations suggest that a lower triplet density of states for YZ-3 is responsible for the blockage in triplet formation and, therefore, does not restrict ASE. This work not only presents a new PAH showing ASE, but also unequivocable proves the massive importance of triplet states in the development of organic lasers.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Tuning the Diradical Character of Indolocarbazoles: Impact of Structural Isomerism and Substitution Position

  • Badía-Domínguez, Irene
  • Canola, Sofia
  • Hernández Jolín, Víctor
  • López Navarrete, Juan T.
  • Sancho-Garcia, Juan-Carlos
  • Negri, Fabrizia
  • Ruiz Delgado, M. Carmen
  • Sancho-Garcia, Juan-Carlos|||/items/c44aeec1-46c2-4d49-af1e-c8f274485704
In this study, a set of 10 positional indolocarbazole (ICz) isomers substituted with dicyanomethylene groups connected via para or meta positions are computationally investigated with the aim of exploring the efficiency of structural isomerism and substitution position in controlling their optical and electronic properties. Unrestricted density functional theory (DFT), a spin-flip time-dependent DFT approach, and the multireference CASSCF/NEVPT2 method have been applied to correlate the diradical character with the energetic trends (i.e., singlet–triplet energy gaps). In addition, the nucleus-independent chemical shift together with ACID plots and Raman intensity calculations were used to strengthen the relationship between the diradical character and (anti)aromaticity. Our study reveals that the substitution pattern and structural isomerism represent a very effective way to tune the diradical properties in ICz-based systems with meta-substituted systems with a V-shaped structure displaying the largest diradical character. Thus, this work contributes to the elucidation of the challenging chemical reactivity and physical properties of diradicaloid systems, guiding experimental chemists to produce new molecules with desirable properties.
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Comparing the Microstructure and Photovoltaic Performance of 3 Perylene Imide Acceptors With Similar Energy Levels but Different Packing Tendencies

  • Adel, Rana
  • Gala, Elena
  • Alonso Navarro, Matías Jesús
  • Gutiérrez Fernández, Edgar
  • Martín, Jaime
  • Stella, Marco
  • Martínez-Ferrero, Eugenia
  • De la Peña, Alejandro
  • Harbuzaru Harbuzaru, Alexandra
  • Ramos, M.Mar
  • Ponce Ortiz, Rocío
  • Segura, José L.
  • Campoy-Quiles, Mariano
[Abstract] While it is widely recognized that microstructure plays an important role in the performance of organic photovoltaics (OPV), systematic studies are often challenging, as varying the molecular packing through typical chemical means (such as sidechain tuning) often affects the molecular energy levels, thus preventing a clear correlation. In this work we present the synthesis of three perylene imide (PI) based electron acceptors with almost identical energy levels, but distinct packing tendencies. We confirm our initial hypothesis by measuring solution and solid-state absorption, and cyclic voltammetry as well as characterizing the films by grazing incidence wide angle X-ray scattering (GIWAXS). In a second step, we repeat the characterization of the three materials in blends with two polymer donors, namely PCDTBT or PBDBT, whose energy levels are well aligned with those of the PI acceptors, and which, additionally, exhibit different degrees of structural order. We show how the initial strong difference between acceptors is partially blurred in blends, but still critical. Finally, we correlate our structural data with OPV devices made with the corresponding six blends. Our data suggest that a good donor acceptor marriage should ensure good energy alignment but also exhibit complementary crystallization tendencies of the two components., The authors acknowledge financial support from the Spanish Ministry of Science and Innovation through the Severo Ochoa Program for Centers of Excellence in R&D (No. CEX2019-000917-S), and projects PGC2018-095411-B-I00, PID2019-106268GB-C33 and PID2019-110305GB-I00, as well as the European Commission through the Horizon 2020 Marie Sklodowska-Curie ITN Programme, SEPOMO, Grant Number: 722651, and the UCM (INV.GR.00.1819.10759). E. G. specially acknowledges Comunidad de Madrid and Universidad Complutense de Madrid for a post-doctoral contract (CT20/19-CT21/19/PEJD-2018-POST/IND-8661PAI). M. J. A. N. acknowledges URJC for a post-doctoral contract. R. P. O. and A. H. also acknowledge support from Junta de Andalucía (project UMA18-FEDERJA-080). We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI), Universidad Complutense de Madrid; INV.GR.00.1819.10759, Universidad Complutense de Madrid; CT20/19-CT21/19/PEJD-2018-POST/IND-8661PAI, Junta de Andalucía; UMA18-FEDERJA-080
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effective interplay of donor and acceptor groups for tuning optoelectronic properties in oligothiophene–naphthalimide assemblies

  • Alonso Navarro, Matías J.
  • Harbuzaru, Alexandra
  • Echegaray, Paula de
  • Arrechea Marcos, Iratxe
  • Harillo Baños, Albert
  • Peña, Alejandro de la
  • Ramos, M. Mar
  • López Navarrete, Juan Teodomiro
  • Campoy Quiles, Mariano
  • Ponce Ortiz, Rocío
  • Segura, José L.
In this work, a series of naphthalimide fused thienopyrazine derivatives was designed, and their synthesis and characterization are reported herein. The interaction of this building block with a donor terthiophene fragment laterally substituted by a series of donor and acceptor constituents was analyzed in depth. This strategy was proven to efficiently modulate both the energy and topology of the frontier molecular orbitals involved in the charge transport mechanism. The interplay between the donor and acceptor strengths of the different units composing the material structure is thus essential to efficiently modulate charge carriers and transport properties and to finely tune the optical and electronic structures of the presented organic semiconductors., This work was financially supported by MINECO (MAT2016-77608-C3-2-P), MICINN (PID2019-106268GB-C33) and the UCM (INV.GR.00.1819.10759). MJAN gratefully acknowledges Universidad Rey Juan Carlos for a predoctoral contract. The university of Málaga acknowledges support from Junta de Andalucia (UMA18-FEDERJA-080) and MICINN (PID2019-110305GB-I00). We also thank CIC NanoGune for technical support in OFET characterization measurements., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

In silico design of 2D polymers containing truxene-based platforms: insights into their structural and electronic properties

  • Gámez-Valenzuela, Sergio
  • Echeverri, Marcelo
  • Gómez-Lor, Berta
  • Martínez, José I.
  • Ruiz Delgado, M. Carmen
In the present work, we investigate two-dimensional (2D) conjugated polymers based on C3-symmetric truxene-based cores at the density functional theory (DFT) level. In total, 27 different 2D polymers have been exhaustively studied with the aim to explore the impact of the following effects on the electronic and charge-transport properties: (i) the nature of the conjugated platform, going from electron-rich truxene (Tx) and triindole (Tr) units to electron-deficient truxenone (To) cores, (ii) the spacing of the cores with different bridges, i.e., phenylene (Ph) or ethynylene (A) units, (iii) the linker position (2,7,12-substitution in the T2 polymers and 3,8,13-substitution in T3 polymers), and (iv) the increased number of ¿-bridges connecting the cores, from three linkers in T2 and T3 to six linkers in T2,3. To this end, we have carried out a large battery of DFT calculations on fragments extracted from the 2D polymers (dimers and trimers) as well as on the corresponding periodic 2D structures (infinite monolayers and self-assembled monolayers) using periodic boundary conditions. Our results show that simultaneous manipulation of the pore surface size and band-gap engineering together with charge-transport parameters can be achieved in these truxene-based 2D polymers by fine-tuning their structural features. The contributions of this study to the overall understanding of the structure¿electronic property relationships of these semiconducting polymers and its correlation with available experimental work are highlighted. Our results provide interesting guidelines to design novel 2D materials with applications ranging from sensing to photocatalysis or electronics., This work was financially supported by the MINECO (CTQ2016-78557-R) and MICINN (PID2019-104125RB-I00) of Spain. JIM acknowledges financial support from Spanish MINECO (MAT2017-85089-C2-1-R, RYC-2015-17730), Comunidad de Madrid via Programa de Investigación Tecnologías 2018 (FOTOART-CM S2018/NMT-4367), and the innovation program under grant agreements 785219 and 881603 (GrapheneCore2 and GrapheneCore3-Graphene-based disruptive technologies, respectively). The work at the University of Málaga wasfunded by the MICINN (PID2019-110305GB-I00) and by the Junta de Andalucıa (P09-FQM-4708, UMA18-FEDERJA-080). S. G.-V. thanks the MINECO for a FPU predoctoral fellowship (FPU17/04908). Computer resources, technical expertise and assistance provided by the SCBI (Supercomputing and Bioinformatics) centre of the University of Málaga are gratefully acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Comparing the microstructure and photovoltaic performance of 3 perylene imide acceptors with similar energy levels but different packing tendencies

  • Adel Abdelaleim, Rana
  • Gala, Elena
  • Alonso Navarro, Matías J.
  • Gutiérrez Fernández, Edgar
  • Martín, Jaime
  • Stella, Marco
  • Martínez Ferrero, Eugenia
  • Peña, Alejandro de la
  • Harbuzaru, Alexandra
  • Ramos, M. Mar
  • Ponce Ortiz, Rocío
  • Segura, José L.
  • Campoy Quiles, Mariano
While it is widely recognized that microstructure plays an important role in the performance of organic photovoltaics (OPV), systematic studies are often challenging, as varying the molecular packing through typical chemical means (such as sidechain tuning) often affects the molecular energy levels, thus preventing a clear correlation. In this work we present the synthesis of three perylene imide (PI) based electron acceptors with almost identical energy levels, but distinct packing tendencies. We confirm our initial hypothesis by measuring solution and solid-state absorption, cyclic voltammetry as well as characterizing the films by grazing incident wide angle X-ray scattering (GIWAXS). In a second step, we repeat the characterization of the three materials in blends with two polymer donors, namely PCDTBT or PBDBT, whose energy levels are well aligned with those of the PI acceptors, and which, additionally, exhibit different degrees of structural order. We show how the initial strong difference between acceptors is partially blurred in blends, but still critical. Finally, we correlate our structural data with OPV devices made with the corresponding six blends. Our data suggest that a good donor acceptor marriage should ensure good energy alignment but also exhibit complementary crystallization tendencies of the two components., The authors acknowledge financial support from the Spanish Ministry of Science and Innovation through the Severo Ochoa” Program for Centers of Excellence in R&D (No. CEX2019-000917-S), and projects PGC2018-095411-B-I00, PID2019-106268GB-C33 and PID2019-110305GB-I00, as well as the European Commission through the Horizon 2020 Marie Sklodowska-Curie ITN Programme, SEPOMO, Grant Number: 722651, and the UCM (INV.GR.00.1819.10759). E.G. specially acknowledges Comunidad de Madrid and Universidad Complutense de Madrid for a post-doctoral contract (CT20/19- CT21/19/PEJD-2018-POST/IND-8661PAI). M.J.A.N. acknowledges URJC for a post-doctoral contract. R.P.O and A.H. also acknowledge support from Junta de Andalucía (projects UMA18-FEDERJA-080). We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

V-shaped pyranylidene/triphenylamine-based chromophores with enhanced photophysical, electrochemical and nonlinear optical properties

  • Gámez-Valenzuela, Sergio
  • Neusser, David
  • Benitez-Martin, Carlos
  • Nájera, Francisco
  • Guadix, Juan A.
  • Moreno-Yruela, Carlos
  • Villacampa, Belén
  • Ponce Ortiz, Rocío
  • Ludwigs, Sabine
  • Andreu, Raquel
  • Ruiz Delgado, M. Carmen
We report the synthesis and comprehensive study of two chromophores based on 4H-pyranylidene moiety as a part of the π-conjugated spacer. Triphenylamine (TPA) acts as donor and tricarbonitrile-based electron-accepting groups complete these V-shaped D–A–D architectures (A, acceptor; D, donor). Their electrochemical, photophysical and nonlinear optical properties are analyzed in detail by using a joint experimental and theoretical approach. The two chromophores exhibit near-infrared fluorescence, large Stokes shift, enhanced emission in tetrahydrofuran/water mixtures and good photostability. Additionally, the dimerization of triphenylamine groups to tetraphenylbenzidine (TPB) takes place upon electrochemical and chemical oxidation showing their peculiar electrochemical behavior and film formation capabilities. Interestingly, high molecular first hyperpolarizabilities and two-photon absorption cross-sections were found, highlighting their potential applications in electro-optical devices. Overall, our work demonstrates that these near-infrared (NIR) fluorescent chromophores are versatile materials with a myriad of applications ranging from optoelectronics to biological applications., The work at the University of Málaga was funded by the MICINN (PID2019-110305GB-I00, PID2019-104293GB-I00, RTI2018-095410-B-I00, EuroNanoMed 2019 PCI2019-111825-2), the Institute of Health Carlos III (ISCIII) RETIC ARADYAL (RD16/0006/0012) and by the Junta de Andalucıa (P09-FQM-4708, UMA18-FEDERJA-080, UMA18-FEDERJA-007, PIER-0084-2019). The work at the University of Zaragoza was funded by the MICINN (PID2019-104307GB-I00/AEI/10.13039/501100011033) and Gobierno de Aragón (E47_20R). The work at the University of Stuttgart was funded by the German Science Foundation (DFG) through the project “LU 1445/7-1, project number 416982273” on electrooptical hybrid modulators, C. Malacrida is acknowledged for discussions. S. G.-V. thanks the MINECO for a FPU predoctoral fellowship (FPU17/04908) and CB-M for FPU fellowship (FPU16/02516). Computer resources, technical expertise and assistance provided by the SCBI (Supercomputing and Bioinformatics) centre of the University of Málaga are gratefully acknowledged. We thank the Vibrational spectroscopy lab (EVI) of the Research Central Services (SCAI) of the University of Málaga and John Pearson (BIONAND) for help with laser confocal microscopy analysis. We gratefully acknowledge the ICTS “NANBIOSIS” facilities, more specifically the U28 Unit of the Andalusian Centre for Nanomedicine & Biotechnology (BIONAND), for their help with the 2PA characterization and the microscopy studies., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

V-shaped pyranylidene/triphenylamine-based chromophores with enhanced photophysical, electrochemical and nonlinear optical properties

  • Gámez-Valenzuela S.
  • Neusser D.
  • Benitez-Martin C.
  • Najera F.
  • Guadix J.A.
  • Moreno-Yruela C.
  • Villacampa B.
  • Ponce Ortiz R.
  • Ludwigs S.
  • Andreu R.
  • Ruiz Delgado M.C.
We report the synthesis and comprehensive study of two chromophores based on 4H-pyranylidene moiety as a part of the p-conjugated spacer. Triphenylamine (TPA) acts as donor and tricarbonitrile-based electron-accepting groups complete these V-shaped D-A-D architectures (A, acceptor; D, donor). Their electrochemical, photophysical and nonlinear optical properties are analyzed in detail by using a joint experimental and theoretical approach. The two chromophores exhibit near-infrared fluorescence, large Stokes shift, enhanced emission in tetrahydrofuran/water mixtures and good photostability. Additionally, the dimerization of triphenylamine groups to tetraphenylbenzidine (TPB) takes place upon electrochemical and chemical oxidation showing their peculiar electrochemical behavior and film formation capabilities. Interestingly, high molecular first hyperpolarizabilities and two-photon absorption cross-sections were found, highlighting their potential applications in electro-optical devices. Overall, our work demonstrates that these near-infrared (NIR) fluorescent chromophores are versatile materials with a myriad of applications ranging from optoelectronics to biological applications. © 2021 The Royal Society of Chemistry.
Docta Complutense
Publication Artículo científico (JournalArticle)

Naphthalimide-Based 3D Organic Semiconductors: Synthesis and Application as Photo-electrocatalysts for Organic Dyes Degradation and Water Splitting

  • Suárez Blas, Fátima
  • Li, Junyi
  • Alonso Navarro, Matías J.
  • Harbuzaru, Alexandra
  • Ponce Ortiz, Rocío
  • Ramos, M. Mar
  • Shalom, Menny
  • Barrio,Jesús
  • Segura Castedo, José Luis
1,2-diketone-based naphthalimide has emerged as an important electron-withdrawing building block in the synthesis of organic semiconductor assemblies for a wide range of applications. The reaction with different diamine derivatives enables the formation of pyrazine linkers which promotes planarity and rigidity of the naphthalimide-based semiconductors, therefore tunning their electronic structure and processability. Despite the significant use of this versatile building block to generate flat and rigid assemblies, the correlation between rigidity and dimensionality in these systems and their photocatalytic activity remains unexplored so far. Herein, with the aim to modulate the photocatalytic activity of these materials, we have developed a new family of assemblies with different dimensionality end-capped with naphthalimide moieties in which one (NIPB), three (3NIPT) and four (4NIPTM) units have been selectively introduced. The good processability of these novel semiconductors combined with their suitable energy levels allowed their application as photo-electrocatalysts for the degradation of organic dyes and for water splitting. The derivative with the highest dimensionality, 4NIPTM, showed higher photo-electrocatalytic activity and lower charge transfer resistance than that of conventional semiconductors (such as TiO2 and C3N4), reaching photocurrents up to 20 mA cm-2.