Skip to main content

DISEÑO DE GELES HIBRIDOS DE GRAFENO PARA EL CULTIVO DE CELULAS: MATERIALES INTELIGENTES E IMPRIMIBLES

CTQ2017-88158-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2017
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE CASTILLA-LA MANCHA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Microwave-assisted functionalization of carbon nanohorns with oligothiophene units with SERS activity

  • Iglesias, Daniel
  • Guerra, Javier
  • González-Cano, Rafael C.
  • Lopez Navarrete, Juan T.
  • Ruiz Delgado, M. Carmen
  • Vázquez, Ester
  • Herrero, M. Antonia
  • Lucío, María Isabel|||0000-0001-7404-352X
[EN] Carbon nanohorns have been functionalized with oligothiophene unitsviathe 1,3-dipolar cycloaddition reaction under microwave irradiation and solvent-free conditions. A dramatic Raman enhancement was found for one of the synthesized derivatives. Experimental andin silicostudies helped to understand the enhancement, attributed to the modification of electromagnetic fields upon functionalization at the tip of the nanostructures., This work was supported by the Iberdrola Foundation (CONV120313), the Spanish Ministerio de Economia y Competitividad (CTQ2017-88158-R), the Junta de Comunidades de Castilla-La Mancha (SBPLY/17/180501/000204) and FEDER-JCCM (UNCM13-1E-1663). The work at the University of Malaga was funded by the MICINN (PID2019-110305GB-I00) and Junta de Andalucia (P09FQM-4708) projects. M. I. L. acknowledges MINECO for her Juan de la Cierva-formacion grant (FJCI-2016-29593). The authors acknowledge the computer resources, technical expertise, and assistance provided by the Supercomputing and Bioinformatics centre of the University of Malaga.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Modulation of waveguide behaviour of an ICT 2H-Benzo[d][1,2,3]Triazole derivative with graphene

  • Torres Moya, Iván
  • González Domínguez, José Miguel
  • Díaz-Ortiz, A.
  • Romero-Nieto, Carlos
  • Rominger, Frank
  • Vázquez, Ester
  • Carrillo Muñoz, José Ramón
  • Prieto, María Pilar
10 figures.-- Supplementary information.-- © 2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Needle-like supramolecular structures prepared by the organized aggregation of a 2H-benzo[d][1,2,3]triazole derivative with few-layer graphene using the slow diffusion technique are described. The as-prepared aggregate shows, by using scanning electron microscopy (SEM), the formation of needles with graphene attached on the surface, which was corroborated by Raman spectroscopy and optical microscopy. The graphene-modified aggregate acts as a selective optical waveguide for green light, in contrast to the pristine aggregate which emits green and red light. These new materials may be of crucial importance for the development of high-performance optoelectronic devices., This work has been financially supported by JCCM-FEDER (project SBPLY/17/180501/000189) and MINECO of Spain (projects CTQ2017-88158-R and CTQ2017-84825-R). I. Torres is indebted to MEC for a FPU studentship and J. M. Gonzalez-Domínguez for his Juan de la Cierva fellowship. We thank Dr. L. Sánchez for their valuable discussions in this research., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Experimental, numerical, and analytical study on the effect of graphene oxide in the mechanical properties of a solvent-free reinforced epoxy resin

  • Horta Muñoz, Sergio
  • Serna Moreno, María del Carmen
  • González Domínguez, José Miguel
  • Morales-Rodríguez, Pablo Antonio
  • Vázquez, Ester
12 Figuras.- 4 Tablas, This paper presents a methodology for manufacturing nanocomposites from an epoxy resin reinforced with graphene oxide (GO) nanoparticles. A scalable and sustainable fabrication process, based on a solvent-free method, is proposed with the objective of achieving a high level of GO dispersion, while maintaining matrix performance. The results of three-point bending tests are examined by means of an analytical technique which allows determining the mechanical response of the material under tension and compression from flexural data. As result, an increase of 39% in the compressive elastic modulus of the nanocomposite is found with the addition of 0.3 wt % GO. In parallel, we described how the strain distribution and the failure modes vary with the amount of reinforcement based on digital image correlation (DIC) techniques and scanning electron microscopy (SEM). A novel analytical model, capable of predicting the influence of GO content on the elastic properties of the material, is obtained. Numerical simulations considering the experimental conditions are carried out. the full strain field given by the DIC system is successfully reproduced by means of the finite element method (FEM). While, the experimental failure is explained by the crack growth simulations using the eXtended finite element method (XFEM)., This research was supported by the Ministerio de Economía y Competitividad of Spain under research projects DPI2016-77715-R and CTQ2017-88158-R, co-financed by the ERDF (European Regional Development Fund). The financial support of the Castilla-La Mancha Government (JCCM) and the European Social Fund (ESF) through projects SBPLY/16/180501/000263 and SBPLY/17/180501/0002041 is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Slow diffusion co-assembly as an efficient tool to tune colour emission in alkynyl benzoazoles

  • Martín Lozano, Raúl
  • Torres Moya, Iván
  • Donoso, Beatriz
  • Carrillo Muñoz, José Ramón
  • González Domínguez, José Miguel
  • Frontiñán-Rubio, Javier
  • Prieto, María Pilar
  • Díaz-Ortiz, A.
11 Figuras, We report here the preparation of co-assembled microcrystals by employing an easy, reproducible and cost-effective technique, namely slow diffusion. 2H-Benzo[d][1,2,3]triazole and benzo[c][1,2,5]thiadiazole were chosen as host and guest skeletons, respectively. Structural similarities allowed the correct co-assembly of the two structures. The co-assemblies were studied by different techniques that included Raman spectroscopy and X-ray diffraction, amongst others. The waveguiding properties and the emission colour of the doped organic microcrystals were also investigated. It was found that changes in the molar ratio of the different doping agents could tune the light emission. Fluorescence microscopy images of the co-assembled microcrystals revealed light colour changes from green to whitish, up to CIE coordinates of (0.370, 0.385). These tunable colour-active materials could be useful in the fields of optoelectronics or lab-on-a-chip for integrated optical circuits at micro-/nanoscale., This work has been financially supported by JCCM-FEDER (project SBPLY/17/180501/000189) and MINECO of Spain (projects CTQ2017-88158-R, CTQ2017-84825-R and RED2018-102331-T). R. Martín and B. Donoso are indebted to MEC for a FPU studentship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tuning Neuronal Circuit Formation in 3D Polymeric Scaffolds by Introducing Graphene at the Bio/Material Interface

  • Rauti, Rossana
  • Secomandi, Nicola
  • Martín, Cristina
  • Bosi, Susanna
  • Severino, Francesco P U
  • Scaini, Denis
  • Prato, Maurizio
  • Vázquez, Ester
  • Ballerini, Laura
2D cultures are useful platforms allowing studies of the fundamental mechanisms governing neuron and synapse functions. Yet, such models are limited when exploring changes in network dynamics due to 3D-space topologies. 3D platforms fill this gap and favor investigating topologies closer to the real brain organization. Graphene, an atom-thick layer of carbon, possesses remarkable properties and since its discovery is considered a highly promising material in neuroscience developments. Here, elastomeric 3D platforms endowed with graphene cues are exploited to modulate neuronal circuits when interfaced to graphene in 3D topology. Ex vivo neuronal networks are successfully reconstructed within 3D scaffolds, with and without graphene, characterized by comparable size and morphology. By confocal microscopy and live imaging, the 3D architecture of synaptic networks is documented to sustain a high rate of bursting in 3D scaffolds, an activity further increased by graphene interfacing. Changes are reported in the excitation/inhibition ratio, potentially following 3D-graphene interfacing. A hypothesis is thus proposed, where the combination of synapse formation under 3D architecture and graphene interfaces affects the maturation of GABAergic inhibition. This will tune the balance between hyperpolarizing and depolarizing responses, potentially contributing to network synchronization in the absence of changes in GABAergic phenotype expression., The authors are especially grateful to Micaela Gandolfo for supervising the confocal image reconstruction, to Livia Piatti and Gianluca Turco for characterizing the material compressibility. IOM-TASC National Laboratory (Trieste) is also gratefully acknowledged for SEM assistance. The authors also wish to thank the IRICA Institute for the use of their shared equipment, services, and expertise. The authors acknowledge financial support from the European Union's Horizon 2020 research and innovation program under Grant Agreements 785219 Graphene Flagship. This work was also supported by the Spanish Ministry of Economy and Competitiveness MINECO (projects CTQ2017-88158-R and CTQ2016-76721-R), by the University of Trieste, and Consorzio Interuniversitario Nazionale per la Scienza e Tecnologia dei Materiali (INSTM). M.P., as the recipient of the AXA Chair, is grateful to the AXA Research Fund for financial support. This work was performed under the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency – Grant No. MDM-2017-0720, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Eco-friendly mechanochemical synthesis of titania-graphene nanocomposites for pesticide photodegradation

  • González, Viviana J.
  • Vázquez, Ester
  • Villajos, Beatriz
  • Tolosana-Moranchel, Álvaro
  • Durán-Valle, Carlos
  • Faraldos, Marisol
  • Bahamonde, A.
Titania graphene hybrid nanocomposites (TiO-FLG) synthesized from graphite and TiO precursors, in a simple and sustainable approach via a three-step method, including the mechanochemical treatment of pre-synthesized FLG and TiO NPs are efficient has led to the preparation of TiO-FLG as efficient nano-catalysts for photocatalytic degradation of a complex mixing of pesticides (isoproturon, pyrimethanil, alachlor and methomyl). The effect of few layer graphene (FLG) loading (0–1.0%) was analyzed to define the optimal ratio of FLG to TiO and compared with the corresponding physical mixtures. X-ray Powder Diffraction (XRD) patterns of all these hybrid photocatalysts have presented the same crystal structure, with anatase as the main crystalline phase and brookite as secondary phase. An interaction between the graphene structure and the TiO nanoparticles has been observed from Energy Dispersive X-Ray (EDX), X-ray photoelectron (XPS) and Raman spectroscopy studies, indicating that FLG is mainly deposited on the surface wrapping the TiO nanoparticles. The presence of FLG in low concentrations and the mechanochemical activation are the key steps to improve the photocatalytic activity of TiO nanoparticles on these hybrid nanocomposites. The TiO-FLG-0.5% hybrid nanocomposite, with circa 1.9 % content of graphitic carbon in surface, has showed the best photocatalytic performance in the degradation of pesticides. Pesticides were completely removed at 350 min, and around 82 % of total organic carbon (TOC) conversion was achieved at 540 min of irradiation time., Graphene Flagship core 3 (881603), CTQ2017-88158-R, CTQ2015- 71238-R, RTI2018-094958-B-I00, SBPL4/ 17/180501/000204, GRU18035, PRE2019-089049, FEDER-JCCM funding, UNCM13-1E- 1663