Skip to main content

SOSTENIBILIDAD DE RECURSOS HIDRICOS: REDUCCION DE CONTAMINANTES ORGANICOS PERSISTENTES MEDIANTE UN SISTEMA COMBINADO DE HUMEDALES Y FOTOCATALISIS HETEROGENEA

CTQ2015-71238-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2015
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Dirección General de Investigación Científica y Técnica
Beneficiary centre UNIVERSIDADE DA CORUÑA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

BULERIA. Repositorio Institucional de la Universidad de León
Publication Artículo científico (JournalArticle)

Degradation of 2-mercaptobenzothizaole in microbial electrolysis cells: Intermediates, toxicity, and microbial communities

  • San Martin Bécares, María Isabel
  • Escapa González, Adrián
  • Alonso García, Raúl Marcos
  • Canle, Moisés
  • Morán Palao, Antonio
[EN] The compound 2-mercaptobenzothizaole (MBT) has been frequently detected in wastewater and surface water and is a potential threat to both aquatic organisms and human health (its mutagenic potential has been demonstrated). This study investigated the degradation routes of MBT in the anode of a microbial electrolysis cell (MEC) and the involved microbial communities. The results indicated that graphene-modified anodes promoted the presence of more enriched, developed, and specific communities compared to bare anodes. Moreover, consecutive additions of the OH substituent to the benzene ring of MBT were only detected in the reactor equipped with the graphene-treated electrode. Both phenomena, together with the application of an external voltage, may be related to the larger reduction of biotoxicity observed in the MEC equipped with graphene-modified anodes (46.2 eqtox∙m−3 to 27.9 eqtox∙m−3)., SI, This research was possible thanks to the financial support by ‘Consejería de Educación de la Junta de Castilla y León’ (ref: LE320P18), a project co-financed by FEDER funds. R. M. Alonso thanks the University of León for the predoctoral contract. M. Canle acknowledges financial support from the Ministerio de Economía y Competitividad (Spain) through project CTQ2015-71238-R (MINECO/FEDER), and regional government Xunta de Galicia (project GPC ED431B 2017/59), respectively.
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Removal of Emerging Pollutants by a 3-Step System: Hybrid Digester, Vertical Flow Constructed Wetland and Photodegradation Post-treatments

  • Sánchez Núñez, Marta
  • Ramos, Daniel R.
  • Fernández-Pérez, María-Isabel
  • Aguilar, Silvio D.
  • Ruiz, Isabel
  • Canle, Moisés
  • Soto, Manuel
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract] The removal of emerging pollutants from municipal wastewater was studied for the first time using a three-step pilot-scale system: 1) hybrid digester (HD) as first step, 2) subsurface vertical flow constructed wetland (VF) as second step, and 3) photodegradation (PD) unit as third step or post-treatment. The HD and VF units were built and operated in series with effluent recirculation at pilot scale. For the PD post-treatment, three alternatives were studied at lab-scale, i) UVC irradiation at 254 nm (0.5 h exposure time), ii) UVA irradiation at 365 nm using a TiO2-based photocatalyst and iii) sunlight irradiation using a TiO2-based photocatalyst, the last two for 1 and 2 h. Alternative iii) was also tested at pilot-scale. Degradation of nine compounds was evaluated: acetaminophen (ACE), caffeine (CAF), carbamazepine (CBZ), ketoprofen (KET), ibuprofen (IBU), diclofenac (DCL), clofibric acid (ACB), bisphenol A (BPA), and sotalol (SOT). Overall, the HD-VF-UVC system completely removed (>99.5 %) ACE, CAF, KET, IBU, DCL and ACB, and to a lesser extent SOT (98 %), BPA (83 %) and CBZ (51 %). On the other hand, the HD-VF-UVA/TiO2 system (at 2 h) achieved >99.5 % removal of ACE, CAF, KET, IBU and DCL while ACB, BPA, CBZ and SOT were degraded by 83 %, 81 %, 78 % and 68 %, respectively. Working also at 2 h of exposure time, in summer conditions, the HD-VF-Sol/TiO2 system achieved >99.5 % removal of ACE, CAF, KET, IBU, DCL and ACB, and to a minor extent BPA (80 %), SOT (74 %) and CBZ (69 %). Similar results, although slightly lower for SOT (60 %) and CBZ (59 %), were obtained in the pilot sunlight plus TiO2 catalyst unit. However, the use of sunlight irradiation with a TiO2-based photocatalyst clearly showed lower removal efficiency in autumn conditions (i.e., 47 % SOT, 31 % CBZ)., This research was funded by the Spanish Ministerio de Economía y Competitividad through project CTQ2015-71238-R (MINECO/FEDER), and the Xunta de Galicia (project GPC ED431B 2020/52 and project GPC ED431B 2019/44), respectively. Funding for open access charge: Universidade da Coruña/CISUG, Xunta de Galicia; GPC ED431B 2020/52, Xunta de Galicia; GPC ED431B 2019/44
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Improved Photocatalyzed Degradation of Phenol, as a Model Pollutant, over Metal-Impregnated Nanosized TiO₂

  • Belekbir, Soukayna
  • El Azzouzi, Mohammed
  • El Hamidi, Adnane
  • Rodríguez-Lorenzo, Laura
  • Santaballa, J. Arturo
  • Canle, Moisés
[Abstract] Photocatalyzed degradation of phenol in aqueous solution over surface impregnated TiO₂ (M = Cu, Cr, V) under UV-Vis (366 nm) and UV (254 nm) irradiation is described. Nanosized photocatalyts were prepared from TiO₂-P25 by wet impregnation, and characterized by X-ray diffraction, X-ray fluorescence, transmission electron microscopy, UV-Vis diffuse reflectance spectroscopy, Raman spectroscopy, and adsorption studies. No oxide phases of the metal dopants were found, although their presence in the TiO₂-P25 lattice induces tensile strain in Cu-impregnated TiO₂-P25, whereas compressive strain in Cr- and V-impregnated TiO₂-P25. Experimental evidences support chemical and mechanical stability of the photocatalysts. Type IV N₂ adsorption–desorption isotherms, with a small H3 loop near the maximum relative pressure were observed. Metal surface impregnated photocatalysts are mesoporous with a similar surface roughness, and a narrow pore distribution around ca. 25 Å. They were chemically stable, showing no metal lixiviation. Their photocatalytic activity was followed by UV-Vis spectroscopy and HPLC–UV. A first order kinetic model appropriately fitted the experimental data. The fastest phenol degradation was obtained with M (0.1%)/TiO₂-P25, the reactivity order being Cu > V >> Cr > TiO₂-P25 under 366 nm irradiation, while TiO₂-P25 > Cu > V > Cr, when using 254 nm radiation. TOC removal under 366 nm irradiation for 300 min showed almost quantitative mineralization for all tested materials, while 254 nm irradiation for 60 min led to maximal TOC removal (ca. 30%). Photoproducts and intermediate photoproducts were identified by HPLC–MS, and appropriate reaction pathways are proposed. The energy efficiency of the process was analysed, showing UV lamps are superior to UVA lamps, and that the efficiency of the surface impregnated catalyst varies in the order Cu > V > Cr., This research was partially supported by the Group of Chemical Reactivity & Photoreactivity at University and funded by the Spanish Ministerio de Economía y Competitividad through project CTQ2015-71238-R (MINECO/FEDER), and the regional government Xunta de Galicia (Project Grupo Potencial Crecemento (GPC) ED431B 2017/59), respectively, Xunta de Galicia; ED431B 2017/59
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Enhanced Photocatalytic Degradation of the Imidazolinone Herbicide Imazapyr upon UV/Vis Irradiation in the Presence of CaᵪMnOᵧ-TiO₂ Hetero-Nanostructures: Degradation Pathways and Reaction Intermediates

  • Bougarrani, Salma
  • Sharma, Preetam K.
  • Hamilton, Jeremy W. J.
  • Singh, Anukriti
  • Canle, Moisés
  • El Azzouzi, Mohammed
  • Byrne, John Anthony
[Abstract] The determination of reaction pathways and identification of products of pollutants degradation is central to photocatalytic environmental remediation. This work focuses on the photocatalytic degradation of the herbicide Imazapyr (2-(4-methyl-5-oxo-4-propan-2-yl-1H-imidazol-2-yl) pyridine-3-carboxylic acid) under UV-Vis and visible-only irradiation of aqueous suspensions of CaᵪMnOᵧ-TiO₂, and on the identification of the corresponding degradation pathways and reaction intermediates. CaᵪMnOᵧ-TiO₂ was formed by mixing CaᵪMnOᵧ and TiO₂ by mechanical grinding followed by annealing at 500 °C. A complete structural characterization of CaᵪMnOᵧ-TiO₂ was carried out. The photocatalytic activity of the hetero-nanostructures was determined using phenol and Imazapyr herbicide as model pollutants in a stirred tank reactor under UV-Vis and visible-only irradiation. Using equivalent loadings, CaᵪMnOᵧ-TiO₂ showed a higher rate (10.6 μM·h⁻¹) as compared to unmodified TiO₂ (7.4 μM·h⁻¹) for Imazapyr degradation under UV-Vis irradiation. The mineralization rate was 4.07 μM·h⁻¹ for CaᵪMnOᵧ-TiO₂ and 1.21 μM·h⁻¹ for TiO₂. In the CaᵪMnOᵧ-TiO₂ system, the concentration of intermediate products reached a maximum at 180 min of irradiation that then decreased to a half in 120 min. For unmodified TiO₂, the intermediates continuously increased with irradiation time with no decrease observed in their concentration. The enhanced efficiency of the CaᵪMnOᵧ-TiO₂ for the complete degradation of the Imazapyr and intermediates is attributed to an increased adsorption of polar species on the surface of CaᵪMnOᵧ. Based on LC-MS, photocatalytic degradation pathways for Imazapyr under UV-Vis irradiation have been proposed. Some photocatalytic degradation was obtained under visible-only irradiation for CaᵪMnOᵧ-TiO₂. Hydroxyl radicals were found to be main reactive oxygen species responsible for the photocatalytic degradation through radical scavenger investigations., This research received external funding from the British Council under the STREAM-MENA Institutional Links Scheme Grant number 278072873. This is a collaboration between Ulster University (UK), Technion Institute (Israel) and Rabat University (Morocco). MC acknowledges support from Ministerio de Economía y Competitividad (Spain) through project CTQ2015-71238-R (MINECO/FEDER). AS would like to acknowledge the financial support received from Ulster University (UK) through the VCRS scholarship. PS would like to acknowledge funding from Invest Northern Ireland for the BioDevices project, British Council; 278072873
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Simulated Sunlight Photodegradation of 2-Mercaptobenzothiazole by Heterogeneous Photo-Fenton Using a Natural Clay Powder

  • Redouane-Salah, Zakaria
  • Malouki, Moulay Abderrahmane
  • Khennaoui, Badis
  • Santaballa, J. Arturo
  • Canle, Moisés
[Abstract] The efficiency of 2-mercaptobenzothiazole (MBT) degradation by heterogeneous photo-Fenton process using local natural clay powder (NCP) is described. Experiments were conducted at natural pH with a batch reactor equipped with a medium-pressure Hg lamp emitting mainly at 366 nm. The natural clay was characterized by SEM-EDS, UV–vis diffuse reflectance spectroscopy, XRF and XRD analysis. The specific BET surface area of the clay was 30.2 m2 g−1.The photodegradation of MBT follows first order (for direct photolysis) and pseudo-first order kinetics (for photocatalysis). Direct photolysis of MBT showed a negligible effect both upon 254 and 365 nm irradiation, while 42.5% and 62% of MBT was eliminated in three hours under 310 nm irradiation in the presence of H2O2 and under sunlight irradiation (using NCP), respectively. Kinetic runs carried out with 5.0·10−5 M MBT and 0.5 g L−1clay showed both higher MBT conversion and photodegradation rate at basic pH (10) and in oxygen saturated media. The presence of oxalic acid and H2O2 significantly enhanced MBT photodegradation. The photodegradation of MBT is mainly attributed to reaction with HO, leading to different intermediates that have been identified by HPLC–MS. A reaction mechanism is proposed. The highest TOC removals were obtained using UVA at low pHs (2.6), and in the absence of O2 with 68% and 65% TOC removal respectively in two hours, whereas MBT transformation is faster (t½ = 7 min) and higher (90%) at pH = 10. The obtained results strongly support the use of natural clay rich in iron oxides as inexpensive, clean and efficient photocatalysts for water pollutants abatement using heterogeneous photo-Fenton process., Z. Redouane-Salah acknowledges the Université Constantine 1 (Algeria) and Centre Universitaire de Tamanrasset (Algeria) for a training leave at the Univ. of A Coruña. This research was partially supported by the Group of Chemical Reactivity & Photoreactivity (REACT!) at University of A Coruña, with finantial support from Ministerio de Economía y Competitividad (Spain) through project CTQ2015-71238-R (MINECO/FEDER)
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

An Efficient Green Photo-Fenton System for the Degradation of Organic Pollutants. Kinetics of Propranolol Removal From Different Water Matrices

  • Remache, W.
  • Ramos, Daniel R.
  • Mammeri, Lamia
  • Boucheloukh, Hadjira
  • Marín, Zenydia
  • Belaidi, S.
  • Sehili, Tahar
  • Santaballa, J. Arturo
  • Canle, Moisés
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract] We report on the degradation of aqueous propranolol (PRO) in a heterogeneous system with natural iron oxide (N.I.O.) and oxalic acid (OAA) under near UV–Vis irradiation. Photolysis experiments showed ca. 65% degradation of PRO after 2 h irradiation, and a similar degradation in the presence of N.I.O. A more efficient PRO removal was obtained upon irradiation within a mixture of N.I.O. and OAA. Under the best conditions considered, complete degradation (> 95%) was observed in less than 10 min, and TOC decreased by 60% after 3 h irradiation. The observed processes were adequately fitted by pseudo-first-order kinetics, the corresponding rate constants were determined, and the effect of different variables analyzed. Photodegradation of PRO is accelerated under acidic conditions, and neutralization takes place along the reaction. Hydroxyl radicals play a predominant role in the photodegradation reaction, as shown by the dramatic inhibition observed upon t-butanol addition. Furthermore, HOradical dot formation is strongly dependent on the pH of the medium. LC-MS identification of ten different intermediates leads to the proposal of a degradation mechanism. This photocatalytic system has also proven effective, for the first time, in different real aqueous matrices (river water > distilled water > sewage ≫ > seawater, revealing quite efficient in the former) and also employing sunlight, where PRO photodegradation was slower. The results obtained show that N.I.O.-oxalate complexes are a green, cheap choice for removing organic pollutants in aqueous solution., The authors acknowledge the financial support of the Ministry of Higher Education and Scientific Research of Algeria (Project B00L01UN250120210003) and for research visits of WR and HB to UDC. This research was partially supported by the React! Group at UDC, and funded by the Spanish Ministerio de Economía y Competitividad through project CTQ2015-71238-R (MINECO/FEDER), and the Xunta de Galicia (Project GPC ED431B 2020/52), respectively. Funding for open access publication was provided by Universidade da Coruña/CISUG, Argelia. Ministre de l'Enseignement Supérieur et de la Recherche Scientifique; B00L01UN250120210003, Xunta de Galicia; ED431B 2020/52
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Mechanical Stability Is Key for Large-Scale Implementation of Photocatalytic Surface-Attached Film Technologies in Water Treatment

  • Ramos, Daniel R.
  • Iazykov, Mykyta
  • Fernández-Pérez, María-Isabel
  • Santaballa, J. Arturo
  • Canle, Moisés
[Abstract] Replacement of classical tertiary water treatment by chemical-free sunlight-driven photocatalytic units has been often proposed. Photocatalysts are required to be cost-effective, inert, chemically stable, reusable, and easy to separate and also that they are mechanically stable. The effect of mechanical stress on a photoactive TiO2 layer, and on its effectivity for degradation of phenol as a model pollutant, has been studied during photocatalytic water treatment using NUV–vis light. Sol–gel (SG) and liquid phase deposition (LPD) methods have been used to coat spherical glass beads with the photocatalyst (TiO2). Physicochemical characterization of coated glass beads has been performed by N2 adsorption–desorption isotherms, SEM, EDXS, and AFM. Phenol photocatalyzed degradation was carried out both in stirred batch and flow reactors irradiated with a medium-pressure Hg-vapor lamp (λ > 350 nm). Phenol concentration was determined by HPLC, and its photoproducts were identified using HPLC/MS. In the stirred batch reactor, all LPD-coated glass beads displayed higher catalytic activity than SG-coated ones, which increased with calcination temperature, 700°C being the most efficient temperature. Preliminary etching of the glass beads surface yielded dissimilar results; whereas, phenol photodegradation with SG-coated etched glass beads is twice faster than with unetched SG ones, the rate reduces to one-third using LPD etched instead of unetched LPD glass beads. Phenol photodegradation using LPD is similar both in stirred batch and flow reactors, despite the latter uses a lower catalyst load. LPD-etched catalyst was recovered and reused in the stirred batch reactor; its activity reduced sharply after the first use, and it also lost activity in successive runs, ca. 10% of activity after each “use and recover” cycle. In the flow reactor, activity loss after the first experiment and recycling (ca. 30%) was much larger than in the following runs, where the activity remained rather constant through several cycles. LPD is more adequate than SG for TiO2 immobilization onto glass beads, and their calcination at 700°C leads to relatively strong and reactive photocatalytic films. Still, TiO2-coated glass beads exhibited very low photoactivity compared to TiO2-P25 nanoparticles, though their separation is much easier and almost costless. The durability of the catalytic layer increases when using a flow reactor, with the pollutant solution flowing in a laminar regime through the photocatalyst bed. In this way, the abrasion of the photocatalytic surface is largely reduced and its photoactivity is better maintained., This research was partially supported by the Group React! and funded by the Ministerio de Economía y Competitividad (Spain, Project CTQ2015-71238-R MINECO/FEDER), and by the regional government of the Xunta de Galicia (Spain, Project GPC ED431B 2020/52), Xunta de Galicia; ED431B 2020/52
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

The Potential of Constructed Wetland Systems and Photodegradation Processes for the Removal of Emerging Contaminants—A Review

  • Sánchez Núñez, Marta
  • Ruiz, Isabel
  • Soto, Manuel
This article belongs to the Topic Soil and Water Pollution Process and Remediation Technologies, [Abstract] The presence of emerging organic contaminants (EOCs) in the environment is increasing and requires the development of technologies for their effective removal. Therefore, a literature review on the behavior of EOCs during municipal wastewater treatment, both in major treatment systems and particularly in constructed wetlands (CWs), was carried out. The study also reviewed the behavior of EOCs in anaerobic digesters (ADs) and advanced oxidation processes, particularly in TiO2-based photocatalysis, which are being proposed as promising pre- and post-treatments for combination with CW. The following ten compounds were screened: acetaminophen (ACE), ofloxacin (OFL), caffeine (CAF), carbamazepine (CBZ), ketoprofen (KET), ibuprofen (IBU), diclofenac (DCL), clofibric acid (ACB), bisphenol A (BPA), and sotalol (SOT). The degradation pathways of the selected EOCs are largely influenced by their physicochemical and biochemical properties. Sorption and biodegradation are the main elimination mechanisms found in AD and CW treatment systems, where the combination of anaerobic and aerobic environments improves the elimination efficiency of EOCs. However, various contaminants appear recalcitrant. In this sense, in combination with CWs, TiO2-based photocatalysis emerges as a promising post-treatment for advanced EOC removal from wastewater., This research was funded by the Spanish Ministerio de Economía y Competitividad through project CTQ2015-71238-R (MINECO/FEDER) and by the Xunta de Galicia through project GPC ED431B 2019/44, Xunta de Galicia; ED431B 2019/44
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Removal of Paracetamol in the Presence of Iron(III) Complexes of Glutamic and Lactic Acid in Aqueous Solution Under NUV Irradiation

  • Benssassi, Mohamed El Hadi
  • Mammeri, Lamia
  • Talbi, Khouloud
  • Lekikot, Bouchra
  • Sehili, Tahar
  • Santaballa, J. Arturo
  • Canle, Moisés
[Abstract] Low concentrations of drugs and their metabolites occurring on the aquatic environment are of significant concern due to their potential effects. This work reports on the removal from aqueous solution, of paracetamol or acetaminophen (APAP) as a model pharmaceutical pollutant, promoted by the photo-Fenton system generated by the photolysis of two organic iron(III) complexes, FeIII-Glutamate & FeIII-Lactate, under 365 nm irradiation (2 < pH < 4). UVA photolysis of these complexes is relatively fast: ca.73% of the FeIII-Glu complex decomposed after 1 h of irradiation (t½=6.4 min, pH = 3.40), 91% in the case of FeIII-Lact complex (t½=6.4 min, pH = 3.0). FeIII + Lact system showed a maximum pseudo-first order rate constant at pH ca. 3, while for FeIII + Glu system it increases with pH. NUV irradiation of FeIII-carboxylic acid complexes promotes APAP photodegradation, that is faster with lactate. The maximum pseudo-first order rate constant was observed at pH = 3 for FeIII + Lact + APAP, while it slightly increased with pH for FeIII + Glu + APAP. The rate constant decreases for both systems as APAP concentration increases, likely due to the formation of FeIII-APAP complexes. At t > 180 min, a second, slower, process is observed. Addition of 1% of t-BuOH and anaerobic conditions inhibit APAP photodegradation, which indicates APAP photodegradation in the presence of FeIII-Glu and FeIII-Lact complexes is limited by formation of H2O2, the source of HO. Seven transformation photoproducts were identified by HPLC-MS, mainly hydroxylated derivatives. Reaction pathways are identified, highlighting the role of the photoformed FeIII-carboxylate long-lived radicals, dissolved O2 and HO in the abatement of pollution due to emerging organic contaminants such as APAP., This research was supported by scholarship from University of Mentouri Brothers Constantine 1, Algeria (Exceptional National Program N.E.P), partially supported by the Chemical Reactivity & Photoreactivity research group (REACT!) (Universidade da Coruña) and funded by the Spanish Ministerio de Economía y Competitividad through project CTQ2015-71238-R (MINECO/FEDER), and the regional government Xunta de Galicia (Project Grupo Potencial Crecemento) GPC ED431B 2020/52), respectively, Xunta de Galicia; ED431B 2020/52
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Combining Constructed Wetlands and UV Photolysis for the Advanced Removal of Organic Matter, Nitrogen, and Emerging Pollutants from Wastewater

  • Sánchez Núñez, Marta
  • Fernández-Pérez, María-Isabel
  • Ruiz, Isabel
  • Canle, Moisés
  • Soto, Manuel
This article belongs to the Special Issue Recent Advances in Technologies for Water and Wastewater Treatment, [Abstract] This study reports the performance of a three-step lab-scale system including a hybrid digester (HD), a vertical flow (VF) constructed wetland, and a photodegradation (PD) lamp, with two different arrangements regarding the position of the recirculation point. In addition to total suspended solids (TSS), chemical oxygen demand (COD), and nitrogen compounds, removal of the following pollutants was investigated: paracetamol (ACE), ofloxacin (OFL), caffeine (CAF), ketoprofen (KET), ibuprofen (IBU), clofibric acid (ACB), bisphenol A (BPA), and sotalol (SOT). An excellent performance of HD was achieved on the elimination of TSS (82.2 ± 18.5% on average) and COD (63.9 ± 4.1%). TSS and COD removal increased to 91.2 ± 0.4% and 83.4 ± 2.9%, respectively, for the combined HD–VF system. Ammonia removal was 57.0 ± 7.8% in the VF unit while significant denitrification occurred in the HD. The overall HD–VF–PD system achieved mean removals of 100% for OFL, KET, SOT, and IBU, 98 ± 2% for ACE, 87 ± 8% for CAF, 81 ± 38% for ACB and 26 ± 9% for BPA. The removal of ACE, OFL, CAF, and IBU was mostly by biodegradation in the HD and VF units while the PD unit was responsible for the removal of KET, ACB, and SOT., This research is part of the project CTQ2015-71238-R (MINECO/FEDER, funded by the Spanish Ministerio de Economía y Competitividad), the project TED2021-132667B-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR, and projects GPC ED431B 2020/52 and GPC ED431B 2019/44 (funded by the Xunta de Galicia), Xunta de Galicia; ED431B 2020/52, Xunta de Galicia; ED431B 2019/44
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Gold Nanoparticles as Colorimetric Sensors for the Detection of DNA Bases and Related Compounds

  • Iglesias, Emilia
[Abstract] Results regarding interaction of colloidal gold solutions with nucleobases, including uracil (U), as well as its sulfur derivatives, 2-thiouracil (2TU) and 4-thiouracil (4TU), cytosine (C), adenine (A), and guanine (G), as well as urea and thiourea (TU), are reported. Anionic stabilized citrate gold nanoparticles (AuNPs) were synthesized by reducing the tetrachloroaurate (III) trihydrate with trisodium citrate. The surface plasmon resonance (SPR) band was used in the characterization of synthesized AuNPs, as well as transmission electron microscope (TEM) imaging, which was used in the characterization of dispersed and aggregated gold nanoparticles. Interactions of nucleobases with the gold surface was analyzed by following the plasmon absorbance band red shift of the AuNPs. The sulfur-containing compounds adsorbed to the nanoparticle surfaces by chemisorption-type interactions; with TU and 4TU, the process is accompanied by a sudden change in color; in contrast, 2TU forms stable functionalized gold nanoparticles. Urea and U do not adsorb to nanoparticle surfaces, but the other heterocyclic bases containing nitrogen interact effectively with the gold surface, causing the assembly of nanoparticles, even though the interparticle self-aggregation process was slower than that mediated by either TU or 4TU. The method is efficient in the colorimetric detection of nucleobases and derivatives at concentration levels on the order of 1 µM., The authors acknowledge support from Ministerio de Economía y Competitividad (Spain) through project CTQ2015-71238-R (MINECO/FEDER)
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Degradation of Aqueous Ketoprofen by Heterogeneous Photocatalysis Using Bi2S3/TiO2–Montmorillonite Nanocomposites Under Simulated Solar Irradiation

  • Djouadi, Lila
  • Khalaf, Hussein
  • Boukhatem, Horiya
  • Boutoumi, Hocine
  • Kezzime, Amina
  • Santaballa, J. Arturo
  • Canle, Moisés
[Abstract] The photocatalytic degradation of Ketoprofen (KP), 2-(3-benzoylphenyl)-propionic acid was studied under near UV–Vis irradiation (NUV-Vis) using supported photocatalysts. Bi2S3/TiO2-montmorillonite (Bi2S3/TiO2-Mt) photocatalysts were synthesized using a two- step ion exchange and impregnation method, and characterized using different techniques: Fourier transform infrared spectra (FTIR), X-ray fluorescence (XRF), X-ray diffraction (XRD), UV–Vis diffuse reflectance spectroscopy (UV–Vis DRS) and photo-electrochemistry. Successful intercalation of TiO2 and Bi2S3 in the montmorillonite (Mt) was carried out, and the corresponding energy diagram for the Bi2S3/TiO2 heterojunction has been proposed. The resulting Bi2S3/TiO2-Mt nanocomposites were able to degrade KP under NUV–Vis irradiation. KP photodegradation was monitored by HPLC. The kinetics of photocatalytic transformation followed the Langmuir-Hinshelwood kinetic model. Pseudo-first-order kinetics adequately fitted the experimental data (t½ca. 17 min at pH 11, t½ca. 44 min at pH 3. 0.5 g·L−1 Bi2S3/TiO2 (25/75)-Mt nanocomposite). Factors affecting the kinetics of the process, such as the different Bi2S3/TiO2 ratio and initial pH solution have been discussed. KP photoproducts were identified using HPLC-MS, and the corresponding reaction mechanism has been proposed. Photodegradation of KP over Bi2S3/TiO2-Mt nanocomposites under NUV-Vis irradiation starts with the decarboxylation of KP and subsequent hydroxylation by HO• and oxidation by HO• and other reactive oxygen species (ROS) leads to the formation of photoproducts. TiO2 and Bi2S3 intercalated in the montmorillonite are cheap and efficient nanocomposites for the abatement of persistent organic pollutants (POP), such as KP, using NUV-Vis light., This research was partially supported by the Group of Chemical Reactivity & Photoreactivity (React!) at University of A Coruña, with financial support from Ministerio de Economía y Competitividad (Spain) through project CTQ2015-71238-R (MINECO/FEDER) and Xunta de Galicia through Grupo Potencial Crecemento (GPC) ED431B 2017/59, Xunta de Galicia; ED431B 2017/59
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Eco-friendly mechanochemical synthesis of titania-graphene nanocomposites for pesticide photodegradation

  • González, Viviana J.
  • Vázquez, Ester
  • Villajos, Beatriz
  • Tolosana-Moranchel, Álvaro
  • Durán-Valle, Carlos
  • Faraldos, Marisol
  • Bahamonde, A.
Titania graphene hybrid nanocomposites (TiO-FLG) synthesized from graphite and TiO precursors, in a simple and sustainable approach via a three-step method, including the mechanochemical treatment of pre-synthesized FLG and TiO NPs are efficient has led to the preparation of TiO-FLG as efficient nano-catalysts for photocatalytic degradation of a complex mixing of pesticides (isoproturon, pyrimethanil, alachlor and methomyl). The effect of few layer graphene (FLG) loading (0–1.0%) was analyzed to define the optimal ratio of FLG to TiO and compared with the corresponding physical mixtures. X-ray Powder Diffraction (XRD) patterns of all these hybrid photocatalysts have presented the same crystal structure, with anatase as the main crystalline phase and brookite as secondary phase. An interaction between the graphene structure and the TiO nanoparticles has been observed from Energy Dispersive X-Ray (EDX), X-ray photoelectron (XPS) and Raman spectroscopy studies, indicating that FLG is mainly deposited on the surface wrapping the TiO nanoparticles. The presence of FLG in low concentrations and the mechanochemical activation are the key steps to improve the photocatalytic activity of TiO nanoparticles on these hybrid nanocomposites. The TiO-FLG-0.5% hybrid nanocomposite, with circa 1.9 % content of graphitic carbon in surface, has showed the best photocatalytic performance in the degradation of pesticides. Pesticides were completely removed at 350 min, and around 82 % of total organic carbon (TOC) conversion was achieved at 540 min of irradiation time., Graphene Flagship core 3 (881603), CTQ2017-88158-R, CTQ2015- 71238-R, RTI2018-094958-B-I00, SBPL4/ 17/180501/000204, GRU18035, PRE2019-089049, FEDER-JCCM funding, UNCM13-1E- 1663