Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 55
Encontrada(s) 1 página(s)

RIUMA. Repositorio Institucional de la Universidad de Málaga
Research software Software (Software)

Software exploración de entornos

  • Godoy-Calvo, Jaime
  • Lin-Yang, Da-hui
  • Vázquez-Martín, Ricardo
  • García-Cerezo, Alfonso José
Software del trabajo EXPLORACIÓN DE ENTORNOS DESCONOCIDOS MEDIANTE VEHÍCULOS TERRESTRES BASADA EN LA ENTROPÍA
RIUMA. Repositorio Institucional de la Universidad de Málaga
Research software Software (Software)

IoRT-in-hand software.

  • Bravo-Arrabal, Juan
  • Cheng, Zhuoqi
  • Fernández-Lozano, Juan Jesús
  • Gómez-Ruiz, José Antonio
  • Schlette, Christian
  • Savarimuthu, Thisius Rajeeth
  • Mandow, Anthony
  • García-Cerezo, Alfonso José
The integration of robotics and mobile networks (5G/6G) through the Internet of Robotic Things (IoRT) is revolutionizing telemedicine, enabling remote physician participation in scenarios where specialists are scarce, where there is a high risk to them, such as in conflicts or natural disasters, or where access to a medical facility is not possible. Nevertheless, touching a human safely with a robotic arm in non-engineered or even out-of-hospital environments presents substantial challenges. This article presents a novel IoRT approach for healthcare in or from remote areas, enabling interaction between a specialist’s hand and a robotic hand. We introduce the IoRT-in-hand: a smart, lightweight end-effector that extends the specialist’s hand, integrating a medical instrument, an RGB camera with servos, a force/torque sensor, and a mini-PC with Internet connectivity. Additionally, we propose an open-source Android app combining MQTT and ROS for real-time remote manipulation, alongside an Edge–Cloud architecture that links the physical robot with its Digital Twin (DT), enabling precise control and 3D visual feedback of the robot’s environment. A proof of concept is presented for the proposed tele-robotic system, using a 6-DOF manipulator with the IoRT-in-hand to perform an ultrasound scan. Teleoperation was conducted over 2300 km via a 5G NSA network on the operator side and a wired network in a laboratory on the robot side. Performance was assessed through human subject feedback, sensory data, and latency measurements, demonstrating the system’s potential for remote healthcare and emergency applications.
RIUMA. Repositorio Institucional de la Universidad de Málaga
Research software Software (Software)

Software for Real-Time FTM-based Victim Positioning Using Heterogeneous Robots in Remote and Outdoor Scenarios.

  • Bravo-Arrabal, Juan
  • Álvarez-Merino, Carlos Simón
  • Toscano-Moreno, Manuel
  • Serón-Barba, Javier
  • Fernández-Lozano, Juan Jesús
  • Gómez-Ruiz, José Antonio
  • Khatib, Emil Jatib
  • Barco-Moreno, Raquel
Accurate victim localization in Remote, Outdoor, Unstructured, and Disaster (ROUD) scenarios remains a significant challenge due to limited infrastructure, complex terrains, and time constraints inherent in Search and Rescue (SAR) operations. This article introduces an innovative real-time positioning system that leverages Fine Time Measurement (FTM), a feature of the IEEE 802.11mc amendment, to detect WiFi-enabled devices typically carried by potential victims. The system integrates a Hybrid Wireless Sensor Network (H-WSN) composed of static and mobile anchors mounted on Uncrewed Ground and Aerial Vehicles (UGVs and UAVs), within a Robot Operating System (ROS)-based architecture. A centralized Feedback Information System (FIS) processes real-time RTT data from the field, executes a multilateration algorithm, and provides live geolocation updates to SAR coordinators.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Research software Software (Software)

O4OA Specification

  • Franco Martins Souza, Beatriz
  • Guizzardi, Renata
  • Pastor López, Oscar|||0000-0002-1320-8471
This document is the reference ontology specification for the Ontology for Ontological Analysis (O4OA) version 2.6., This work has been developed under the project Digital Knowledge Graph – Adaptable Analytics API with the financial support of Accenture LTD, the Generalitat Valenciana through the CoMoDiD project (CIPROM/2021/023), the Spanish State Research Agency through the DELFOS (PDC2021-121243-I00) and SREC (PID2021-123824OB-I00) projects, MICIN/AEI/10.13039/501 100011033 and co-financed with ERDF and the European Union Next Generation EU/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Research software Software (Software)

Manual de usuario de la app Lalaby-Lung: Monitorización de calidad de vida de pacientes con cáncer de pulmón, Manual de usuario de la app Lalaby-Lung

  • Asensio-Cuesta, Sabina|||0000-0003-0246-3773
  • Garcia-Gomez, Juan M
  • Sánchez García, Daniel
  • Sánchez-García, Ángel|||0000-0003-1843-9209
  • Maestu, Inmaculada
  • Soria Comes, Teresa
  • Martín Ureste, María
  • Galera López, Mar
  • Collado Martinez, David
Este documento describe el manual de usuario de Lalaby-Lung, una aplicación móvil desarrollada por el grupo de investigación BDSLab del Instituto ITACA de la Universitat Politècnica de València (UPV) para el seguimiento de la calidad de vida en pacientes con cáncer de pulmón. La aplicación permite registrar de forma automática y manual información relevante sobre el estado de salud y la vida diaria del paciente mediante el uso de sensores del teléfono móvil y cuestionarios clínicos validados. Entre los datos recogidos se incluyen indicadores de actividad física, interacción social, uso del dispositivo y variables ambientales, así como información reportada por el paciente a través de cuestionarios como el EORTC QLQ-C30 y la escala ECOG. La integración de estas fuentes de información permite generar el fenotipo digital del paciente, facilitando una monitorización continua en su entorno cotidiano y complementando la información clínica tradicional. Además, la aplicación dispone de un cuadro de mandos para profesionales sanitarios, desde el cual las/los oncólogas/os pueden visualizar los datos recopilados y configurar alertas ante posibles cambios en la calidad de vida o en la experiencia de uso de la aplicación. El manual recoge las instrucciones necesarias para la instalación, configuración y uso de la aplicación Lalaby-Lung, así como la descripción de sus principales funcionalidades, con el objetivo de facilitar su utilización por pacientes y profesionales sanitarios en el contexto de investigación y seguimiento clínico digital.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Research software Software (Software)

TexMiLAB

  • Periñán-Pascual, Carlos|||0000-0002-6483-4712
[EN] TexMiLAB is a workbench that allows researchers to do text-mining experiments in two modes: graphical user interface and C# scripting interface., Este software es parte del proyecto de I+D+i PID2020-112827GB-I00 financiado por MICIU/AEI/10.13039/501100011033.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Research software Software (Software)

VALUEbot, Plataforma generadora de chatbots mediante IA para la comunicación del valor público del PSM

  • Maroto González, Isaac
  • Túñez López, Miguel
  • Fieiras Ceide, César
  • Fernández Lombao, Tania
  • Vaz Álvarez, Martín
  • Rodríguez Castro, Marta
  • Pérez Seijo, Sara
  • Prieto Arosa, Juan Manuel
  • García-Verdugo Peralta, Carlos
VALUEbot es un software experimental de generación de chatbots basado en inteligencia artificial, diseñado para que medios de servicio público y organizaciones afines puedan crear, personalizar y desplegar asistentes conversacionales orientados a comunicar y evaluar el valor público de sus contenidos. La plataforma permite construir chatbots a partir de fuentes documentales controladas, definir presets de comunicación (tono, estilo y rol informativo) y adaptar el comportamiento del bot a distintos casos de uso, como la divulgación, el acceso a contenidos o la mediación con las audiencias. VALUEbot está concebido para ser utilizado por perfiles no técnicos, facilitando la personalización, la experimentación rápida y la integración flexible en entornos digitales existentes. Desde el punto de vista técnico, VALUEbot se basa en una arquitectura modular desarrollada en Python, apoyada en bibliotecas de código abierto y orientada a la gestión de modelos de inteligencia artificial locales preentrenados, lo que permite operar sin dependencia obligatoria de servicios externos y favorece el control sobre datos, procesos y resultados. El sistema se distribuye acompañado de documentación README, tanto a nivel general como dentro de cada carpeta del proyecto, donde se explica el funcionamiento y el proceso de puesta en marcha de cada módulo que compone el ecosistema VALUEbot. El núcleo del sistema es valueBotCore, que constituye el proyecto principal de VALUEbot. Este componente permite crear y gestionar avatares interactivos (personajes definidos por conocimientos y rasgos de personalidad) capaces de comunicarse con los usuarios a través de múltiples canales, como web, WhatsApp u otros servicios externos, utilizando distintos motores de IA. VALUEbot se concibe como una prueba de concepto abierta y no compilada, orientada a evolucionar hacia un componente reutilizable o librería, alineada con los principios editoriales, organizativos y éticos de los medios de servicio público. Su filosofía de desarrollo abierto permite modificar, extender y adaptar la herramienta a distintos escenarios, evitando dependencias de soluciones cerradas. El código se publica bajo licencia Apache 2.0, facilitando su reutilización, modificación e integración en otros proyectos conforme a los términos de dicha licencia.
RUA. Repositorio Institucional de la Universidad de Alicante
Research software Software (Software)

Tech4DModelviewerRV, Tech4DModelviewerRV: Visualización 3D/4D del cuerpo humano mediante Realidad Virtual

  • Azorin-Lopez, Jorge
  • Fuster-Guilló, Andrés
  • Saval-Calvo, Marcelo
  • Castillo Zaragoza, Juan Miguel
  • García-D'Urso, Nahuel
  • Pérez Pérez, Luis Fernando
  • Zaragoza Martí, Ana
  • Hurtado-Sánchez, José Antonio
  • Sanchez-SanSegundo, Miriam
  • Ruiz-Robledillo, Nicolás
  • Albaladejo-Blázquez, Natalia
  • Albaladejo-Blázquez, Natalia|||/items/27137052-c062-49fe-af8f-40a5f68c2e54
  • Azorin-Lopez, Jorge|||/items/d43d029b-14bf-4dac-9bda-ed08e213bb1d
  • Fuster-Guilló, Andrés|||/items/0d96ca87-a50d-4788-b5d3-456c44f8a6b6
  • Hurtado-Sánchez, José Antonio|||/items/82d0326d-edb9-49ba-b1b7-143abad1f66b
  • Ruiz-Robledillo, Nicolás|||/items/0c5e4dff-8b8f-4a95-8239-761854dae13d
  • Sanchez-SanSegundo, Miriam|||/items/6568386a-f3ed-44cf-9a26-8a0451062150
  • Saval-Calvo, Marcelo|||/items/403da831-5e9a-4111-8bed-6b60076f8101
  • Zaragoza Martí, Ana|||/items/da2e5d2d-827c-4ae3-8a31-379d0908a2fb
  • García-D'Urso, Nahuel|||/items/2996c123-43e6-424d-b407-225d39a29839
El software “Tech4DModelviewerRV: Visualización 3D/4D del cuerpo humano mediante Realidad Virtual” tiene como objetivo principal permitir la visualización de los modelos 3D con textura en dispositivos de realidad virtual. El software permite cambiar el punto de vista de la visualización del cuerpo mediante el giro de la cabeza. También se permite visualizar una secuencia de modelos 3D (4D) de sucesivas sesiones de tratamiento. Se permite comparar dos modelos 3D superpuestos de dos sesiones seleccionadas para valorar la evolución.
RUA. Repositorio Institucional de la Universidad de Alicante
Research software Software (Software)

GPLSI-UH LETO V1.0: Motor de aprendizaje a través de ontologías, GPLSI-UH LETO V1.0: Learning Engine Through Ontologies

  • Estévez-Velarde, Suilan
  • Piad-Morffis, Alejandro
  • Gutiérrez, Yoan
  • Montoyo, Andres
  • Muñoz, Rafael
  • Almeida-Cruz, Yudivian
  • Palomar, Manuel
  • Valdés Pérez, Daniel Alejandro
  • Gutiérrez, Yoan|||/items/8f7f89db-a015-4ed6-85b9-75bd041ee8bd
  • Montoyo, Andres|||/items/a2b7158a-7032-423a-a7b5-0f7b92902b72
  • Muñoz, Rafael|||/items/d6ef1286-fc50-4e8b-9d97-bcbc30e3d1bc
  • Palomar, Manuel|||/items/71e8f2d8-8d56-4c8e-89df-d6ce2497d967
LETO es un marco de aprendizaje de ontologías diseñado para extraer conocimiento de una variedad de fuentes. Estas fuentes pudieran ser datos estructurados y no estructurados, y de ellas se podrá descubrir, actualizar continuamente, enriquecer e integrar información relevante como parte de un único conocimiento semántico. En la actual versión 1.0 se limita a la extracción de conocimiento desde datos no estructurados, i.e. textos en lenguaje natural, siguiendo el modelo semántico publicado en [EGM2018]. Entre sus funcionalidades está la extracción de entidades y relaciones semánticas desde fuentes textuales; la transformación de esta información en elementos interrelacionados mediante técnicas de agrupamientos; y finalmente generación de ontologías representativas del contenido procesado. Se proporciona un punto de acceso API, y una herramienta visual para la manipulación de procesos y visualización de las ontologías obtenidas [EMA2019].
RUA. Repositorio Institucional de la Universidad de Alicante
Research software Software (Software)

QuaSumm: Marco de resumen multidocumento con reranking cuántico e inspirado en el paradigma cuántico

  • Sánchez Bellido, Mónica
  • Lloret, Elena
  • Lloret, Elena|||/items/4593ef69-8308-49d3-8f0f-17e6ee078be5
QuaSumm (Quantum-inspired Summarization) es un marco de resumen extractivo y abstractivo multidocumento y guiado por consulta (query-focused) que integra mecanismos de reordenación (reranking) cuánticos y de inspiración cuántica para controlar de forma explícita el equilibrio entre relevancia y redundancia. El sistema sigue una arquitectura recuperar-y-generar (retrieve-then-generate) en cuatro fases: recuperación de documentos mediante BM25, extracción y recuperación de frases candidatas a nivel de oración, reordenación de las frases seleccionadas y generación final del resumen. La novedad principal reside en la fase de reordenación, donde QuaSumm implementa cuatro estrategias sobre un mismo pipeline: un reranker BGE sin control de redundancia (línea base), un MMR (Maximal Marginal Relevance) clásico, y dos variantes cuánticas —QMMR-pure y QMMR-inspired— que sustituyen la similitud del coseno por medidas de similitud y redundancia de naturaleza cuántica. QMMR-pure traduce directamente el MMR al paradigma cuántico mediante codificación de amplitud (amplitude encoding) y el test SWAP, ejecutable sobre hardware cuántico NISQ; QMMR-inspired reformula la redundancia mediante matrices de densidad actualizadas de forma incremental, ejecutable de manera eficiente sobre hardware clásico. Las frases seleccionadas se emplean directamente (resumen extractivo) o como contexto de un modelo de lenguaje grande (resumen abstractivo). El sistema es agnóstico al dominio y fácilmente adaptable a distintos ámbitos —biomédico, noticias, científico y de opinión—, y ha sido validado sobre seis conjuntos de datos de referencia. Potencial de explotación: QuaSumm es explotable como componente de resumen y reducción de redundancia de grandes volúmenes de texto. Aplicaciones: resumen de literatura científica y biomédica, vigilancia tecnológica, sistemas de respuesta a preguntas y asistentes documentales, resumen de noticias y de opiniones de clientes, y pipelines de recuperación de información y RAG. Al ser modular y compatible con hardware clásico (con una variante preparada para hardware cuántico NISQ), pueden interesarse empresas de tecnologías del lenguaje e IA, editoriales y proveedores de bases de datos científicas, farmacéuticas, medios de comunicación, plataformas de análisis de opinión y compañías de computación cuántica.
RUA. Repositorio Institucional de la Universidad de Alicante
Research software Software (Software)

HanaNLG: Sistema de generación de lenguaje híbrido y flexible, HanaNLG: A Flexible Hybrid System for Natural Language Generation

  • Barros, Cristina
  • Lloret, Elena
  • Lloret, Elena|||/items/4593ef69-8308-49d3-8f0f-17e6ee078be5
HanaNLG (Hybrid surfAce realisatioN Approach for Natural Language Generation) es un sistema híbrido para la fase realización capaz de generar automáticamente texto que es fácilmente adaptable a diferentes géneros, dominios y lenguajes. HanaNLG es híbrido porque se basa en el uso de recursos lingüísticos así como en información estadística, a través del uso de Modelos de Lenguaje Factorizados, para construir la salida final. Para generar lenguaje, el sistema propuesto hace uso de estrategias de over-generation y ranking, donde primero se genera un conjunto de frases candidatas para después realizar un ranking donde se seleccione una frase en base a un criterio definido, en nuestro caso, su probabilidad. Además, dado que HanaNLG solo está enfocado en la fase de realización, no tenemos información de los procesos de macroplanificación y microplanificación, para poder guiar la generación en base a un tema concreto, palabras, dominio, etc. Es por ello, que proponemos el concepto de característica semilla. Estas características semillas pueden considerarse objetos abstractos (por ejemplo, fonemas, sentimientos, polaridades, etc.) que guiarán el proceso de generación en relación al vocabulario que la frase generada deba contener. Por consiguiente, el tipo de textos generados por HanaNLG puede ser adaptado a diferentes dominios y también a diferentes objetivos comunicativos (por ejemplo, generación automática de resúmenes). Asimismo, dada la naturaleza de los recursos y técnicas empleadas, nuestro sistema también es fácilmente adaptable a diferentes géneros, dominios y lenguajes. Una descripción más detallada del método completo se puede encontrar en [Barros19, Barros17]., HanaNLG (Hybrid surfAce realisatioN Approach for Natural Language Generation) is a hybrid system for the surface realisation stage capable of automatically generating text which is easily adaptable to different genres, domains and language. HanaNLG is hybrid because the final text is created based on the use of linguistic resources in conjunction with statistical information, through the use of factored language models. In order to generate language, this approach makes use of overgeneration and ranking strategies, where a set of candidate sentences is first generated and then a ranking is performed to select a sentence based on a defined criterion, which, in our case, is the sentence probability. In addition, since HanaNLG is only focused on the surface realisation stage, there is not any information about the macroplanning and microplanning processes, so, to guide the generation on the basis of a specific theme, words, domain, etc., we propose the concept of seed feature. These seed features can be considered as abstract objects (e.g., phonemes, emotions, polarities, etc.) which will guide the generation process in relation with the vocabulary that the generated sentence must contain. Therefore, the text generated by HanaNLG can be adapted to different domains and also to different communicative goals (e.g., automatic summarisation). Likewise, given the nature of the resources and techniques employed, our system is also easily adaptable to different genres, domains and language. A detailed description of the complete approach can be found at [Barros19, Barros17].
RUA. Repositorio Institucional de la Universidad de Alicante
Research software Software (Software)

GPLSI: Simple.Text, Simple.Text tool

  • Espinosa-Zaragoza, Isabel
  • Piqueres-Garrido, Fernando
  • Botella-Gil, Beatriz
  • Moreda, Paloma
  • Palomar, Manuel
  • Espinosa-Zaragoza, Isabel|||/items/b9b30d7e-4b6b-4a40-b4c6-214bb9ba331f
  • Moreda, Paloma|||/items/aeb186ed-9034-4fdf-96fc-88941be830e7
  • Palomar, Manuel|||/items/71e8f2d8-8d56-4c8e-89df-d6ce2497d967
  • Botella-Gil, Beatriz|||/items/a03c3d62-efa7-4c50-8870-103ca1d81d37
Simple.Text es una herramienta de Procesamiento de Lenguaje Natural (PLN) que adapta automáticamente textos en español a formato de Lectura Fácil, facilitando la comprensión para personas con dificultades cognitivas o de lectura. Esta herramienta, fruto del proyecto de investigación ClearText, abarca transformaciones léxicas, ortotipográficas, sintácticas y semánticas. La interfaz de Simple.Text presenta dos cajas: en la primera se introduce el texto original y en la segunda se visualiza el texto transformado, ya sea resumido o simplificado. Dos botones permiten seleccionar entre resumen o simplificación/adaptación E2R (Easy-to-Read), resaltándose en color más intenso la opción activa. Además, el texto también puede ser adjuntado en lugar de copiado directamente. El texto transformado y cualquier glosario generado se muestran en una caja adicional, permitiendo su descarga en formato .txt. La API es responsive, es decir, se adapta a dispositivos móviles, tabletas y portátiles, y acepta diversos formatos de entrada como PDF, TXT y Word. Implementada en Python 3 bajo una arquitectura cliente-servidor, Simple.Text detecta fenómenos lingüísticos específicos mediante algoritmos avanzados y realiza las transformaciones definidas. Esta es la primera herramienta que adapta textos según las necesidades del usuario, abordando fenómenos lingüísticos y considerando discapacidades cognitivas, mejorando así la accesibilidad y comprensión de textos en español.
RUA. Repositorio Institucional de la Universidad de Alicante
Research software Software (Software)

Chatbids, Asistente virtual especializado en Licitaciones públicas

  • Fernández Martínez, Javier
  • Gutiérrez, Yoan
  • Muñoz, Rafael
  • Montoyo, Andres
  • Palomar, Manuel
  • Fernández Martínez, Javier|||/items/f9b0416b-2411-47be-a586-11f90957e00f
  • Gutiérrez, Yoan|||/items/8f7f89db-a015-4ed6-85b9-75bd041ee8bd
  • Montoyo, Andres|||/items/a2b7158a-7032-423a-a7b5-0f7b92902b72
  • Muñoz, Rafael|||/items/d6ef1286-fc50-4e8b-9d97-bcbc30e3d1bc
  • Palomar, Manuel|||/items/71e8f2d8-8d56-4c8e-89df-d6ce2497d967
Chatbids es un asistente virtual basado en modelos de inteligencia artificial para facilitar la comprensión y acceso simplificado a las licitaciones de contratos públicos, en fuentes de información de la administración pública de la provincia de Alicante. Este sistema integra tecnologías del tipo RAG (Generación Aumentada por Recuperación), las cuales permiten procesar, analizar e indexar documentos de manera optimizada. Así, dichos documentos pueden ser consultados mediante un asistente de diálogo generativo. Chatbids facilita la ingestión continua de contenido a través de un proceso de indexación semántica. La interacción entre la base de datos de licitaciones y el usuario emplea un modelo de lenguaje abierto interno, lo que asegura que todo el flujo de información permanezca seguro dentro del sistema sin recurrir a servicios externos.
RUA. Repositorio Institucional de la Universidad de Alicante
Research software Software (Software)

Social Univ 2.0: Monitorización del entorno digital social universitario, Social Univ 2.0: Monitoring the Digital and Social Environment of the University

  • Gutiérrez, Yoan
  • Moreno, Isabel
  • Fernández Martínez, Javier
  • Martínez-Barco, Patricio
  • Fernández Martínez, Javier|||/items/f9b0416b-2411-47be-a586-11f90957e00f
  • Gutiérrez, Yoan|||/items/8f7f89db-a015-4ed6-85b9-75bd041ee8bd
  • Martínez-Barco, Patricio|||/items/f9630270-fe31-44c8-b611-dfaf9c109a4d
Social-Univ 2.0 es una aplicación web que monitoriza el ecosistema digital de universidades con presencia en redes sociales. Su objetivo es, mediante tecnologías del lenguaje humano, analizar comentarios de la red social Twitter, así como los metadatos asociados, y relacionar actores mediante los mensajes en los que estos intervienen en un período de tiempo. Para iniciar el estudio social, el sistema requiere la definición de palabras claves que definan con precisión a la universidad que se desea observar en el entorno social. Estas palabras claves pueden ser identificadores (ej. @nickname), hashtags u otros elementos identificativos que señalen a una entidad digital en cuestión. A continuación, el sistema descarga comentarios de Twitter y los analiza semánticamente para valorar las diferentes posturas (ej. opiniones positivas, negativas y neutrales) que cada actor tiene respecto a otros, así como su influencia en el entorno digital-social. Por último, se muestra al usuario la información social analizada mediante grafos, perfiles y nubes de palabras en una interfaz que permite filtrar el análisis por periodos inferiores a 6 meses. Todo lo anterior permite a Social-Univ 2.0: (I) facilitar tanto el estudio de interacciones sociales y sus matices, como el análisis de grupos sociales y sus comportamientos; (II) identificar a actores sociales relevantes e influyentes, así como los temas comunes en determinados grupos sociales; y (III) y favorecer la medición del impacto de campañas y eventos. Una descripción más detallada del sistema completo se puede encontrar en [MFG19].
RUA. Repositorio Institucional de la Universidad de Alicante
Research software Software (Software)

Dossier Next

  • Fernández Martínez, Javier
  • Gómez, José M.
  • Martínez-Barco, Patricio
  • Gutiérrez, Yoan
  • Llopis, Fernando
  • Muñoz, Rafael
  • Montoyo, Andres
  • Moreda, Paloma
  • Palomar, Manuel
  • Fernández Martínez, Javier|||/items/f9b0416b-2411-47be-a586-11f90957e00f
  • Gutiérrez, Yoan|||/items/8f7f89db-a015-4ed6-85b9-75bd041ee8bd
  • Llopis, Fernando|||/items/e8548380-b70f-44e7-a7fa-c7bed36990d8
  • Martínez-Barco, Patricio|||/items/f9630270-fe31-44c8-b611-dfaf9c109a4d
  • Montoyo, Andres|||/items/a2b7158a-7032-423a-a7b5-0f7b92902b72
  • Moreda, Paloma|||/items/aeb186ed-9034-4fdf-96fc-88941be830e7
  • Muñoz, Rafael|||/items/d6ef1286-fc50-4e8b-9d97-bcbc30e3d1bc
  • Palomar, Manuel|||/items/71e8f2d8-8d56-4c8e-89df-d6ce2497d967
Dossier Next es una aplicación web que permite rastrear y clasificar de forma automática y periódica la información procedente de cualquier tipo de fuente de internet con contenido textual i.e. páginas web, periódicos digitales, boletines oficiales, etc., extrayendo únicamente la información más interesante para el usuario y descartando el resto. Para comenzar la recolección de información, el usuario debe indicar las fuentes a partir de las cuales desea obtener información, haciendo referencia a cada una las partes de interés para la recuperación de información, i.e. título, cuerpo, fecha, autor, etc. Para que el sistema pueda decidir qué contenido es relevante para el usuario, éste debe indicar también una serie de palabras claves, que deben aparecer en el documento en cuestión. Una vez establecida esta configuración del sistema se procede a descargar toda la información deseada por el usuario. Desde la página inicial se pueden visualizar los documentos por fecha y fuente.
RUA. Repositorio Institucional de la Universidad de Alicante
Research software Software (Software)

AutoForest

  • Filatov, Pavel
  • Berna-Martinez, Jose Vicente
  • Saavedra Pastor, David
  • Arnau Muñoz, Lucía
  • Berna-Martinez, Jose Vicente|||/items/d89949d5-e966-4e05-8193-a93f521aaee9
  • Saavedra Pastor, David|||/items/53736385-a22a-43a4-b025-387dd72fa589
  • Arnau Muñoz, Lucía|||/items/33d125e4-b1db-410e-9276-d2c2c3ee6aad
AutoForest es una aplicación de escritorio para la detección de anomalías en datasets de infraestructuras críticas utilizando el algoritmo Isolation Forest con auto-ajuste automático de hiperparámetros. La aplicación funciona aportando un dataset, y ejecutando una serie de algoritmos que permiten el cálculo optimizado de los hiperparámetros que actúan dentro del algoritmo Isolation Forest. Se obtiene un ajuste independiente del conocimiento del usuario.
RUA. Repositorio Institucional de la Universidad de Alicante
Research software Software (Software)

Tech4DModelviewer, Tech4DModelviewer: Visualización 3D/4D del cuerpo humano

  • Azorin-Lopez, Jorge
  • Fuster-Guilló, Andrés
  • Saval-Calvo, Marcelo
  • Villena Martínez, Víctor
  • Castillo Zaragoza, Juan Miguel
  • García-D'Urso, Nahuel
  • Manchón Martínez, Cayetano
  • Ferrer-Cascales, Rosario
  • Pérez Pérez, Luis Fernando
  • Zaragoza Martí, Ana
  • Sanchez-SanSegundo, Miriam
  • Azorin-Lopez, Jorge|||/items/d43d029b-14bf-4dac-9bda-ed08e213bb1d
  • Ferrer-Cascales, Rosario|||/items/af59398b-f91f-4da8-8fbb-b9774ee8776f
  • Fuster-Guilló, Andrés|||/items/0d96ca87-a50d-4788-b5d3-456c44f8a6b6
  • Sanchez-SanSegundo, Miriam|||/items/6568386a-f3ed-44cf-9a26-8a0451062150
  • Saval-Calvo, Marcelo|||/items/403da831-5e9a-4111-8bed-6b60076f8101
  • Zaragoza Martí, Ana|||/items/da2e5d2d-827c-4ae3-8a31-379d0908a2fb
  • García-D'Urso, Nahuel|||/items/2996c123-43e6-424d-b407-225d39a29839
El software “Tech4DModelviewer: Visualización 3D/4D del cuerpo humano” tiene como objetivo principal proporcionar funcionalidades para los especialistas del ámbito de la salud y pacientes en procesos de tratamiento dietético orientadas a la mejora de la adherencia al tratamiento mediante la visualización de los modelos 3D/4D del cuerpo humano. El software Tech4DModelviewer proporciona funcionalidades relacionadas con: • Gestión de datos de pacientes: La gestión de los datos de los pacientes, permitiendo el alta de nuevos pacientes y la introducción de sus datos médicos en las diferentes sesiones de tratamiento dietético. • La visualización de modelos 3D y 4D: Se permite visualizar los modelos 3D con textura cambiando el punto de vista, zoom, etc. Se permite visualizar una secuencia de modelos 3D (4D) de sucesivas sesiones de tratamiento. Se permite comparar dos modelos 3D superpuestos de dos sesiones seleccionadas para valorar la evolución. Se permite visualizar un modelo 4D del cuerpo coloreado en función del volumen de reducción de grasa en cada zona. • La obtención de medidas: Se proporcionan funcionalidades de obtención de medidas sobre los modelos 3D de las partes del cuerpo seleccionadas por el especialista. Se permite la obtención de medidas multidimensionales (1D, 2D y 3D).
RUA. Repositorio Institucional de la Universidad de Alicante
Research software Software (Software)

GPLSI FieroBoT: Asistente virtual para la captación de insultos, GPLSI FieroBoT: A virtual assistant for collecting insults

  • Botella-Gil, Beatriz
  • Gutiérrez, Yoan
  • Martínez-Barco, Patricio
  • Palomar, Manuel
  • Gutiérrez, Yoan|||/items/8f7f89db-a015-4ed6-85b9-75bd041ee8bd
  • Martínez-Barco, Patricio|||/items/f9630270-fe31-44c8-b611-dfaf9c109a4d
  • Palomar, Manuel|||/items/71e8f2d8-8d56-4c8e-89df-d6ce2497d967
  • Botella-Gil, Beatriz|||/items/a03c3d62-efa7-4c50-8870-103ca1d81d37
FieroBoT es un asistente virtual orientado a la recopilación de insultos desde la aplicación de mensajería Telegram. A través del sistema de mensajería de Telegram los usuarios pueden libremente tener una conversación con el robot donde se incita a que lo insultemos. El proceso es el siguiente, en primer lugar, se nos preguntará nuestro sexo y la edad y a continuación podremos insultar al robot. Solo se almacenará el contenido del mensaje y los datos demográficos genéricos como rango de edad y sexo con el fin de organizar el contenido. Los insultos recolectados servirán para la creación de un recurso de palabras y expresiones violentas que podrá ser utilizado para distintos estudios relacionados con el lenguaje popular.
RUA. Repositorio Institucional de la Universidad de Alicante
Research software Software (Software)

Tech4DScanserver, Tech4DScanserver: Escaneado 3D del cuerpo humano

  • Azorin-Lopez, Jorge
  • Fuster-Guilló, Andrés
  • Saval-Calvo, Marcelo
  • Villena Martínez, Víctor
  • Castillo Zaragoza, Juan Miguel
  • García-D'Urso, Nahuel
  • Manchón Martínez, Cayetano
  • Ferrer-Cascales, Rosario
  • Zaragoza Martí, Ana
  • Sebban, Marc
  • Azorin-Lopez, Jorge|||/items/d43d029b-14bf-4dac-9bda-ed08e213bb1d
  • Ferrer-Cascales, Rosario|||/items/af59398b-f91f-4da8-8fbb-b9774ee8776f
  • Fuster-Guilló, Andrés|||/items/0d96ca87-a50d-4788-b5d3-456c44f8a6b6
  • Saval-Calvo, Marcelo|||/items/403da831-5e9a-4111-8bed-6b60076f8101
  • Zaragoza Martí, Ana|||/items/da2e5d2d-827c-4ae3-8a31-379d0908a2fb
  • García-D'Urso, Nahuel|||/items/2996c123-43e6-424d-b407-225d39a29839
El módulo Tech4DScanserver es el encargado de la adquisición de los datos procedentes de una red de cámaras RGB-D y la reconstrucción de los modelos 3D (modelos basados en malla con textura proyecta) del cuerpo humano de las personas escaneadas. Estas se ubican dentro de una cabina dotada de la red de cámaras RGB-D (Realsense) colocadas en posiciones adecuadas para permiten cubrir la visibilidad de todas las partes del cuerpo. Para proporcionar dicha funcionalidad Tech4DScanserver desarrolla la siguiente secuencia de etapas: Preproceso de calibrado; Adquisición sincronizada de las nubes de puntos; Proceso de filtrado de las nubes de puntos; Registro rígido de las nubes de puntos; Generación de la malla; Proyección de textura.
RUA. Repositorio Institucional de la Universidad de Alicante
Research software Software (Software)

H-GAN: the power of GANs in your Hands

  • Oprea, Sergiu
  • Karvounas, Giorgos
  • Martínez González, Pablo
  • Kyriazis, Nikolaos
  • Orts-Escolano, Sergio
  • Oikonomidis, Iason
  • Garcia-Garcia, Alberto
  • Tsoli, Aggeliki
  • Garcia-Rodriguez, Jose
  • Argyros, Antonis
  • Garcia-Rodriguez, Jose|||/items/d5bc18f8-44db-4723-b291-5849321e9e69
  • Orts-Escolano, Sergio|||/items/2222768a-df75-443a-89ea-0ca8ede0e69b
We present HandGAN (H-GAN), a cycle-consistent adversarial learning approach implementing multi-scale perceptual discriminators. It is designed to translate synthetic images of hands to the real domain. Synthetic hands provide complete ground-truth annotations, yet they are not representative of the target distribution of real-world data. We strive to provide the perfect blend of a realistic hand appearance with synthetic annotations. Relying on image-to-image translation, we improve the appearance of synthetic hands to approximate the statistical distribution underlying a collection of real images of hands. H-GAN tackles not only the cross-domain tone mapping but also structural differences in localized areas such as shading discontinuities. Results are evaluated on a qualitative and quantitative basis improving previous works. Furthermore, we relied on the hand classification task to claim our generated hands are statistically similar to the real domain of hand.
RUA. Repositorio Institucional de la Universidad de Alicante
Research software Software (Software)

Comparative Analysis of Discrete Subtraction and Cross-Correlation for Subpixel Object Tracking [Software]

  • Ferrer, Belén
  • Tomás, M. Baralida
  • Wan, Min
  • Sheridan, John T.
  • Mas, David
  • Ferrer, Belén|||/items/5e5608cd-d990-430f-aaac-adb3e380bd8c
  • Mas, David|||/items/076f73d0-f11c-4386-bac8-0c993632f7d7
  • Tomás, M. Baralida|||/items/ce4d7e43-07b4-436a-8b00-f86c31dce331
Many applications in physics and engineering require non-invasive, precise object tracking, which can be achieved with image processing methods at very good cost-efficiency ratios. The traditional method for measuring displacement with subpixel resolution involves cross-correlation between images and interpolation of the correlation peak. While this method enables target tracking with a resolution of thousandths of a pixel, it is computationally intensive and susceptible to peak-locking errors. Recently, a new method based on discrete subtraction between images has been presented as an alternative to cross-correlation to improve computational efficiency, which also results in being free of peak-locking errors. This manuscript presents an experimental evaluation of the performance of the discrete subtraction method (DSM) and compares it with the cross-correlation method in terms of subpixel accuracy and deviation errors. Four different targets were used with apparent displacements as small as 0.002 px, which approaches the theoretical digital resolution limit. The results show that the discrete subtraction method is more sensitive to noise but does not suffer from peak-locking error, thus being a reliable alternative to the correlation method, mainly for calibration processes.
RUA. Repositorio Institucional de la Universidad de Alicante
Research software Software (Software)

GPLSI AitanaWEB. Asistente Virtual sobre procesos de matriculación académica

  • Gutiérrez, Yoan
  • Abreu Salas, José Ignacio
  • Montoyo, Andres
  • Muñoz, Rafael
  • Abreu Salas, José Ignacio|||/items/99fd9ec6-0b97-4c02-a28e-98bc309cff48
  • Gutiérrez, Yoan|||/items/8f7f89db-a015-4ed6-85b9-75bd041ee8bd
  • Montoyo, Andres|||/items/a2b7158a-7032-423a-a7b5-0f7b92902b72
  • Muñoz, Rafael|||/items/d6ef1286-fc50-4e8b-9d97-bcbc30e3d1bc
AitanaWEB es un chatbot para la asistencia telemática a usuarios sobre los procesos de matriculación académica y cuestiones relacionadas. Ofrece información sobre temas como los Horarios, Notas de Corte, Matrícula, Traslado de Expediente entre otros. Esta diseñado orientado a la accesibilidad y la usabilidad, posibilitando el acceso en Valenciano y Castellano. Permite el acceso desde diferentes navegadores, como Chrome, Firefox, Edge, Chrome para Android y Safari. Incorpora un narrador y facilidades de reconocimiento del habla permitiendo al usuario realizar la interacción con el sistema mediante voz. El proyecto cuenta de dos componentes básicos: (i) uso de DialogFlow de Google como servicio de Inteligencia Artificial donde se estructuran y entrenan las preguntas y respuestas. (ii) componente de desarrollo propio que hace de controlador, intérprete y enrutador entre DialogFlow y la interfaz de usuario final.
RUA. Repositorio Institucional de la Universidad de Alicante
Research software Software (Software)

Génesis 2.0

  • Ortega Jiménez, Fernando
  • Berna-Martinez, Jose Vicente
  • Arnau Muñoz, Lucía
  • Saavedra Pastor, David
  • Berna-Martinez, Jose Vicente|||/items/d89949d5-e966-4e05-8193-a93f521aaee9
  • Arnau Muñoz, Lucía|||/items/33d125e4-b1db-410e-9276-d2c2c3ee6aad
  • Saavedra Pastor, David|||/items/53736385-a22a-43a4-b025-387dd72fa589
Herramienta de generación de datasets sintéticos para entornos IoT. El objetivo del software es proporcionar a investigadores una herramienta simplificada y eficiente para la generación de conjuntos de datos sintéticos basados en patrones personalizados de comportamiento de dispositivos IoT. La aplicación permite modelar comportamientos lo más realistas posible y controlados de sensores para su uso en el desarrollo y validación de proyectos de I+D+i. La herramienta permite la definición estructurada de los datos emitidos por un dispositivo de forma que puede replicarse cualquier fuente de datos.
RUA. Repositorio Institucional de la Universidad de Alicante
Research software Software (Software)

Método de externalización a plataformas Cloud Computing de procesamiento especializado GPU. Aplicación a sistemas de sensorización inteligente IoT

  • Maciá, Antonio
  • Mora, Higinio
  • Jimeno-Morenilla, Antonio
  • Adsuar Abaldea, Víctor
  • Adsuar Abaldea, Víctor|||/items/b41aff72-c425-4cbf-8f89-a8e1f9231cf2
  • Jimeno-Morenilla, Antonio|||/items/5a277765-a179-4393-b7b3-c50ac73dd59f
  • Mora, Higinio|||/items/77871521-ed51-42c5-9240-dca1930db8e5
El mundo de la computación está en constante cambio. Las tendencias principales que definen las aplicaciones de hoy en día son la Computación en la nube (Cloud computing) y la aceleración de aplicaciones mediante tarjeta gráfica (GPU). El paradigma del Internet de las Cosas (IoT) se apoya en la computación en la nube para proveer de capacidad de cómputo a dispositivos de baja capacidad y energía. Esto se conoce como una arquitectura de externalización de cómputo, donde los dispositivos IoT (sensores, cámaras, bombillas) envían datos a la nube, donde son procesados para extraer información y tomar decisiones, ya que en la nube se dispone de mayor cantidad de recursos de cómputo. Es en este procesamiento de datos donde entra en juego el papel de las tarjetas gráficas. Debido a su arquitectura masivamente paralela, estos dispositivos son capaces de acelerar algoritmos de procesado de datos e inteligencia artificial (IA). Este método permite mejorar el aprovechamiento de los recursos de la GPU en arquitecturas de externalización de cómputo, permitiendo que múltiples aplicaciones aisladas mediante contenedores compartan la GPU de una manera segura. De esta manera se incrementa el uso de la tarjeta, reduciendo los costes necesarios para el funcionamiento de las aplicaciones.
RUA. Repositorio Institucional de la Universidad de Alicante
Research software Software (Software)

Código abierto AQUASOC (www.aquasoc.org), www.aquasoc.org

  • Ortiz, Guadalupe
  • Aledo, Antonio
  • Mañas-Navarro, José Javier
  • Ortiz, Guadalupe|||/items/9cefee0f-eee9-4c3e-ba67-69dc91e388e8
  • Aledo, Antonio|||/items/d95bb72f-371a-4476-af6e-51fe8394f8a0
  • Mañas-Navarro, José Javier|||/items/4cc97da1-b6a6-4e39-abe2-a027509df10e
Aquasoc es una plataforma online para el autodiagnóstico de impactos y capacidades sociales ante inundaciones. Orientada principalmente a gestores locales del riesgo, permite al usuario evaluar hasta 72 impactos sociales y 43 capacidades sociales frente a inundaciones para obtener, finalmente, un listado priorizado de áreas de capacitación social ante inundaciones, así como posibles acciones para su desarrollo a escala local. Tanto el contenido de la plataforma como el algoritmo que sustenta el proceso de evaluación, han sido el resultado del proyecto PID2021-122500OB-I00, financiado por el Ministerio de Ciencia, Innovación y Universidades (2022-2026).
RUA. Repositorio Institucional de la Universidad de Alicante
Research software Software (Software)

PCT Observer Tablero de Parques Científicos/Tecnológicos, PCT Observer

  • Francés, Olga
  • Abreu Salas, José Ignacio
  • Gutiérrez, Yoan
  • Fernández Martínez, Javier
  • Palomar, Manuel
  • Abreu Salas, José Ignacio|||/items/99fd9ec6-0b97-4c02-a28e-98bc309cff48
  • Fernández Martínez, Javier|||/items/f9b0416b-2411-47be-a586-11f90957e00f
  • Francés, Olga|||/items/174da0ee-29c0-4901-a69c-cfe706e01dce
  • Gutiérrez, Yoan|||/items/8f7f89db-a015-4ed6-85b9-75bd041ee8bd
  • Palomar, Manuel|||/items/71e8f2d8-8d56-4c8e-89df-d6ce2497d967
PCT Observer es una aplicación web para visualizar y analizar datos relacionados con los parques científicos/tecnológicos. Permite descubrir la existencia de diferencias significativas o relaciones entre los indicadores clave, comparar su evolución en el tiempo, y determinar los indicadores más relevantes para caracterizar los diferentes tipos de parques.
RUA. Repositorio Institucional de la Universidad de Alicante
Research software Software (Software)

Sheet Music Transformer, SMT

  • Ríos-Vila, Antonio
  • Calvo-Zaragoza, Jorge
  • Rizo, David
  • Paquet, Thierry
  • Ríos-Vila, Antonio|||/items/f47307e4-fa30-4f8d-b90d-b6d71e26d89b
  • Calvo-Zaragoza, Jorge|||/items/a4f3686d-f0fe-4317-a73c-cd711ceb1dde
  • Rizo, David|||/items/447626c0-6412-451c-8f26-b4a244418da2
The Sheet Music Transfomrmer (SMT) is a novel model for Optical Music Recognition (OMR) beyond monophonic level transcription. Unlike traditional approaches that primarily leverage monophonic transcription techniques for complex score layouts, the SMT model overcomes these limitations by offering a robust image-to-sequence solution for transcribing polyphonic musical scores directly from images.
RUA. Repositorio Institucional de la Universidad de Alicante
Research software Software (Software)

SimuFlow

  • Delicado Sanz, José Manuel
  • Berna-Martinez, Jose Vicente
  • Arnau Muñoz, Lucía
  • Saavedra Pastor, David
  • Berna-Martinez, Jose Vicente|||/items/d89949d5-e966-4e05-8193-a93f521aaee9
  • Arnau Muñoz, Lucía|||/items/33d125e4-b1db-410e-9276-d2c2c3ee6aad
  • Saavedra Pastor, David|||/items/53736385-a22a-43a4-b025-387dd72fa589
Este software permite la simulación de una infraestructura de generación y abastecimiento de agua potable a través de la gestión utilizando sistemas multi agente. Este modelo de gestión permite abordar la optimización multi objetivo a través de software distribuido. La herramientas permite la parametrización de un red de abastecimiento de agua y de los sistemas de producción mediante la extracción de pozos de agua potable. El simulador muestra la evolución de la infraestructura en el tiempo y permite encontrar los parámetros más adecuados para la configuración del sistema de control.
RUA. Repositorio Institucional de la Universidad de Alicante
Research software Software (Software)

UnrealROX+: An Improved Tool for Acquiring Synthetic Data from Virtual 3D Environments

  • Martínez González, Pablo
  • Oprea, Sergiu
  • Castro-Vargas, John Alejandro
  • Garcia-Garcia, Alberto
  • Orts-Escolano, Sergio
  • Garcia-Rodriguez, Jose
  • Vincze, Markus
  • Garcia-Rodriguez, Jose|||/items/d5bc18f8-44db-4723-b291-5849321e9e69
  • Orts-Escolano, Sergio|||/items/2222768a-df75-443a-89ea-0ca8ede0e69b
Synthetic data generation has become essential in last years for feeding data-driven algorithms, which surpassed traditional techniques performance in almost every computer vision problem. Gathering and labelling the amount of data needed for these data-hungry models in the real world may become unfeasible and error-prone, while synthetic data give us the possibility of generating huge amounts of data with pixel-perfect annotations. However, most synthetic datasets lack from enough realism in their rendered images. In that context UnrealROX generation tool was presented in 2019, allowing to generate highly realistic data, at high resolutions and framerates, with an efficient pipeline based on Unreal Engine, a cutting-edge videogame engine. UnrealROX enabled robotic vision researchers to generate realistic and visually plausible data with full ground truth for a wide variety of problems such as class and instance semantic segmentation, object detection, depth estimation, visual grasping, and navigation. Nevertheless, its workflow was very tied to generate image sequences from a robotic on-board camera, making hard to generate data for other purposes. In this work, we present UnrealROX+, an improved version of UnrealROX where its decoupled and easy-to-use data acquisition system allows to quickly design and generate data in a much more flexible and customizable way. Moreover, it is packaged as an Unreal plug-in, which makes it more comfortable to use with already existing Unreal projects, and it also includes new features such as generating albedo or a Python API for interacting with the virtual environment from Deep Learning frameworks.
RUA. Repositorio Institucional de la Universidad de Alicante
Research software Software (Software)

MuRET v1.0, Aplicación online de reconocimiento óptico de música y transcripción

  • Rizo, David
  • Calvo-Zaragoza, Jorge
  • Calvo-Zaragoza, Jorge|||/items/a4f3686d-f0fe-4317-a73c-cd711ceb1dde
  • Rizo, David|||/items/447626c0-6412-451c-8f26-b4a244418da2
MuRET es el acrónimo de “Music, recognition, encoding, and transcription”. El software que registramos consiste en una aplicación web que ayuda al usuario a convertir un conjunto de imágenes que contienen notación musical en una partitura digital codificada en formato MEI (Music Encoding Initiative). No se trata sólo de un OMR (optical music recognition) sino que incluye todas las funcionalidades necesarias para obtener una transcripción completa de una obra a partir de partes separadas en ficheros de entrada.
RUA. Repositorio Institucional de la Universidad de Alicante
Research software Software (Software)

XatDocs: Software RAG para el Procesamiento e Interrogación Semántica de Repositorios de Documentos

  • Gutiérrez, Yoan
  • Fernández Martínez, Javier
  • Montoyo, Andres
  • Muñoz, Rafael
  • Palomar, Manuel
  • Fernández Martínez, Javier|||/items/f9b0416b-2411-47be-a586-11f90957e00f
  • Gutiérrez, Yoan|||/items/8f7f89db-a015-4ed6-85b9-75bd041ee8bd
  • Montoyo, Andres|||/items/a2b7158a-7032-423a-a7b5-0f7b92902b72
  • Muñoz, Rafael|||/items/d6ef1286-fc50-4e8b-9d97-bcbc30e3d1bc
  • Palomar, Manuel|||/items/71e8f2d8-8d56-4c8e-89df-d6ce2497d967
XatDocs es un software informático tipo RAG (Retrieval Augmented Generation) que procesa, analiza e indexa documentos de forma optimizada y semántica para posteriormente interrogar dichos documentos a través de una asistente de diálogo generativo. XatDocs permite ingerir contenido continuamente y a través de un proceso de indexación semántico. Respecto a la interacción entre la base de datos y el usuario se utiliza un modelo de lenguaje abierto local, lo cual garantiza que todo el flujo de información se conserve de forma segura dentro del sistema sin utilizar servicios de terceros.
RUA. Repositorio Institucional de la Universidad de Alicante
Research software Software (Software)

Dossier Next Report

  • Fernández Martínez, Javier
  • Gutiérrez, Yoan
  • Martínez-Barco, Patricio
  • Gómez, José M.
  • Llopis, Fernando
  • Muñoz, Rafael
  • Montoyo, Andres
  • Moreda, Paloma
  • Palomar, Manuel
  • Fernández Martínez, Javier|||/items/f9b0416b-2411-47be-a586-11f90957e00f
  • Gutiérrez, Yoan|||/items/8f7f89db-a015-4ed6-85b9-75bd041ee8bd
  • Llopis, Fernando|||/items/e8548380-b70f-44e7-a7fa-c7bed36990d8
  • Martínez-Barco, Patricio|||/items/f9630270-fe31-44c8-b611-dfaf9c109a4d
  • Montoyo, Andres|||/items/a2b7158a-7032-423a-a7b5-0f7b92902b72
  • Moreda, Paloma|||/items/aeb186ed-9034-4fdf-96fc-88941be830e7
  • Muñoz, Rafael|||/items/d6ef1286-fc50-4e8b-9d97-bcbc30e3d1bc
  • Palomar, Manuel|||/items/71e8f2d8-8d56-4c8e-89df-d6ce2497d967
Dossier Next Report es una aplicación que permite generar resúmenes automáticos y análisis estadístico a partir de la base de datos de una aplicación Dossier Next. Simplemente se ha de indicar un intervalo de fechas y se generarán automáticamente varios resúmenes: uno general, teniendo en cuenta todos los documentos de ese período, y otro para cada entidad detectada dentro de los documentos de ese período. De esta forma, es posible obtener la información más importante de una colección de textos y de cada una de las entidades mencionadas en esa colección.
RUA. Repositorio Institucional de la Universidad de Alicante
Research software Software (Software)

Isolation Forest Visualizer

  • Rouanet Feliu, Emilia
  • Berna-Martinez, Jose Vicente
  • Arnau Muñoz, Lucía
  • Saavedra Pastor, David
  • Berna-Martinez, Jose Vicente|||/items/d89949d5-e966-4e05-8193-a93f521aaee9
  • Arnau Muñoz, Lucía|||/items/33d125e4-b1db-410e-9276-d2c2c3ee6aad
  • Saavedra Pastor, David|||/items/53736385-a22a-43a4-b025-387dd72fa589
The application applies the Isolation Forest algorithm to multivariate time-series data uploaded as a CSV file. It scores each data point with an anomaly probability, classifies points above a configurable threshold as anomalies, groups consecutive anomalies into incidents, and provides a set of interactive charts to explore the results.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Data from: Different taxonomic and functional indices complement the understanding of herb-layer community assembly patterns in a southern-limit temperate forest

  • Valerio, Mercedes
  • Gazol Burgos, Antonio
  • Puy, Javier
  • Ibáñez, Ricardo
The efficient conservation of vulnerable ecosystems in the face of global change requires a complete understanding of how plant communities respond to various environmental factors. We aim to demonstrate that a combined use of different approaches, traits, and indices representing each of the taxonomic and functional characteristics of plant communities will give complementary information on the factors driving vegetation assembly patterns. We analyzed variation across an environmental gradient in taxonomic and functional composition, richness, and diversity of the herb-layer of a temperate beech-oak forest that was located in northern Spain. We measured species cover and four functional traits: leaf dry matter content (LDMC), specific leaf area (SLA), leaf size, and plant height. We found that light is the most limiting resource influencing herb-layer vegetation. Taxonomic changes in richness are followed by equivalent functional changes in the diversity of leaf size but by opposite responses in the richness of SLA. Each functional index is related to different environmental factors even within a single trait (particularly for LDMC and leaf size). To conclude, each characteristic of a plant community is influenced by different and even contrasting factors or processes. Combining different approaches, traits, and indices simultaneously will help us understand how plant communities work., Funding provided by: Fundación Caja Navarra, Crossref Funder Registry ID: http://dx.doi.org/10.13039/501100006671, Award Number: 10833 (Program "Tú Eliges, Tú Decides"). Funding provided by: Universidad de Navarra, Crossref Funder Registry ID: http://dx.doi.org/10.13039/501100004435, Award Number: project "Biodiversity Data Analytics and Environmental Quality". Funding provided by: Universidad de Navarra, Crossref Funder Registry ID: http://dx.doi.org/10.13039/501100004435, Award Number: project "Red de Observatorios de la Biodiversidad de Navarra (ROBIN)". Funding provided by: Departamento de Educación, Gobierno de Navarra, Crossref Funder Registry ID: http://dx.doi.org/10.13039/501100003425, Award Number: Ayudas predoctorales para la realización de programas de doctorado de interés para Navarra; Plan de Formación y de I + D 2018. Funding provided by: Ministerio Español de Ciencia e Innovación, Crossref Funder Registry ID: Award Number: RyC2020-030647-I. Funding provided by: Consejo Superior de Investigaciones Científicas, Crossref Funder Registry ID: http://dx.doi.org/10.13039/501100003339, Award Number: PIE-20223AT003. Funding provided by: Ministerio Español de Ciencia e Innovación, Crossref Funder Registry ID: Award Number: FJC2020-042954-I. Funding provided by: EU "NextGenerationEU/PRTR", Crossref Funder Registry ID: Award Number: FJC2020-042954-I., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Plant community data for European ecoregions

  • Capitán, José A.
  • Cuenda, Sara
  • Ordóñez, Alejandro
  • Alonso, David
Patterns in macroecology are related to species occurrence across meaningful spatial and temporal scales. The dataset provided here reports species distribution data (presence-absence) for herbaceous plants across a number of European habitats (ecoregions). Species occurrence is accompanied by the corresponding plant's maximun stem height values. This dataset has been used to unveil patterns of herbaceous plant height clustering in mid-latitude European ecoregions. Presence-absence data for herbaceous plants were drawn from Atlas Florae Europaeae (Jalas & Suominen, 1964-1999). Associated to each species, a dominant habitat (ecoregion) was assigned according to the WWF Biomes of the World classification. Each herbaceous species in an ecoregion was characterized by its maximum stem height. Mean height values were obtained for different sources. In order to correlate clustering patterns with productivity measures, actual evapotranspiration (AET) data is also provided. AET maps were obtained from data estimated through remote sensing (Mu et al., 2011), which are publicly available in the MODIS project website (http://www.ntsg.umt.edu/project/modis/mod17.php). Plant distribution and trait data across Europe unveils a relation between plant height clustering and actual evapotranspiration. This clustering is most evident in mid-latitude ecoregions, where conditions for growth (reflected in actual evapotranspiration rates) are optimal. Away from this optimum, climate severity leads to non-significant height clustering in actual communities., Funding provided by: Ministerio de Economia y Competitividad, Award Number: CGL2012-39964. Funding provided by: Ministerio de Economia y Competitividad, Award Number: CGL2015-69043-P. Funding provided by: Ministerio de Ciencia, Innovación y Universidades, Award Number: PGC2018-096577-B-I00. Funding provided by: Banco Santander, Award Number: PR87/19-22582. Funding provided by: Ministerio de Economia y Competitividad, Award Number: CGL2012-39964., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Data from: Fertiliser application modulates the impact of interannual climate fluctuations and plant-to-plant interactions on the dynamics of annual species in a Mediterranean grassland

  • Valerio, Mercedes
  • Ripollés, María
  • Gazol Burgos, Antonio
  • Ibáñez, Ricardo
[Background] Climate and land-use changes, which include the application of various types of organic and inorganic fertilisers, have been reducing the species diversity of Mediterranean grasslands and threatening their conservation. Annual plants are one of the most diverse functional groups of species in these grasslands, despite suffering competitive pressure from perennial herbaceous and woody species, and they are essential for ecosystem functioning and stability., [Aims] To quantify how fertilisation modulates the impact of plant-to-plant interactions and climate fluctuations on the dynamics of annuals in Mediterranean grasslands. We hypothesised that the application of sewage sludge would increase competition between functional groups, reducing the abundance of annuals in the long-term, but would buffer the negative impacts of drought on the year-to-year fluctuation of the diversity of annuals., [Methods] In a semi-natural species-rich Mediterranean grassland in northern Spain, we analysed the changes in the taxonomical and functional composition and diversity of annuals over 14 years in response to variations in the abundance of perennial herbaceous and woody species, climate fluctuations, and fertilisation with sewage sludge. We quantified separately the patterns of year-to-year fluctuations and long-term trends., [Results] The frequency and diversity of annuals decreased with a higher abundance of perennial herbaceous species, drought in June, and cold winters. The addition of sewage sludge decreased the abundance of annuals in the long-term, seemed to promote competition between annuals and other functional groups at an interannual scale, and mitigated the negative effects of drought and cold., [Conclusions] Fertilisation influences differently the temporal response of annuals to climate fluctuations and plant-to-plant interactions., Funding provided by: Fundación Caja Navarra, Award Number: ref. 10833 (Programa Tú Eliges, Tú Decides). Funding provided by: Universidad de Navarra, Award Number: Project Biodiversity Data Analytics and Environmental Quality. Funding provided by: Universidad de Navarra, Award Number: ROBIN (Red de Observatorios de la Biodiversidad de Navarra). Funding provided by: Asociación de Amigos de la Universidad de Navarra, Award Number: Convocatoria de Ayudas para la Formación del Personal Investigador. Funding provided by: Departamento de Educación, Gobierno de Navarra. Award Number: Ayudas predoctorales para la realización de programas de doctorado de interés para Navarra. Funding provided by: Ministerio de Ciencia e Innovación, Award Number: RyC2020-030647-I. Funding provided by: Consejo Superior de Investigaciones Científicas, Award Number: PIE-20223AT003., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

SHuBest, an app for Android to orientate on Best Management Practices for optimizing Soil and Water use in agricultural system

  • Gómez Calero, José Alfonso
  • Ruiz, A.
  • Gamboa, N.
  • Klik, Andreas
  • Strauss, Peter
  • Dostál, Tomáš
  • Intrigliolo, Diego S.
  • Guzmán, Gema
  • Chen, L.
Project Co-ordinators: Dr. Jose Alfonso Gómez Calero (Instituto de Agricultura Sostenible (IAS-CSIC), Dr. Weifeng Xu (Fujian Agriculture and Forest University, FAFU)., [EN] This app is based on the handbook Best management practices for optimized use of soil and water in agricultura (http://hdl.handle.net/10261/246622 ). Both have been developed and funded under the H2020 programme through the SHui (GA 773903) project in cooperation between the European Union and China. In this app, A. Ruíz, N. Gamboa, J.A. Gómez and C. Chen have participated in its conception and development, with the additional contribution of A. Klik, P. Strauss, T. Dostal, D. Intrigliolo, and G. Guzmán in the development of the decision-making tree and overall validation and final proof error checking. Pending of distribution through Google Play, it can be installed in your android device installing the *.apk file downloaded from this link in your android device and clicking on it., [ES] Esta app se basa en el manual de Mejores prácticas de manejo para el uso optimizado del suelo y el agua en la agricultura (http://hdl.handle.net/10261/250542 ). Ambos han sido desarrollado y financiados en el marco del programa H2020 a través del proyecto SHui (GA 773903) en cooperación entre la Unión Europea y China. En esta app han participado A. Ruíz, N. Gamboa, J.A. Gómez y C. Chen en su concepción y desarrollo, con la participación adicional de A. Klik, P. Strauss, T. Dostal, D. Intrigliolo, y G. Guzmán en el desarrollo del árbol de toma de decisiones y su depuración y revisión final. Pendiente de distribución a través de Google Play, se puede instalar en su dispositivo Android instalando el archivo *.apk descargado de este enlace en su dispositivo Android y haciendo clic en él., [ZH] 该款应用程序是基于农业中土壤和水分优化利用而形成的最佳管理实践手册(http://hdl.handle.net/10261/253611 )。它由H2020计划中欧盟与中国合作的SHui项目(GA 773903)开发并赞助。在此应用程序中,A. Ruíz、N. Gamboa、J.A. Gómez 和C. Chen参与了其构思和开发,A. Klik、P. Strauss、T. Dostal、D. Intrigliolo和G. Guzmán在决策树开发、整体验证和最终错误检查中做出了额外的贡献。 等待通过Google Play分发,它可以安装在您的安卓设备中,安装从此链接下载的*.apk文件在您的安卓设备中并单击它。, SHui project funded by the European Commission SHui (GA 773903). ALIVE project, funded by Spanish Government (PID2019-105793RB-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Software to implement simulations of Raman spectra of single-molecules in an inhomogeneous field

  • Zhang, Yao
  • Esteban, Ruben
  • Cui, Jie
  • Aizpurua, Javier
This program is a Matlab-based code to simulate the off-Resonant Stokes Raman spectra of a single-molecule in any inhomogeneous field, typically in a field whose spatial distribution is approximated by a Gaussian function. Thus, it is also an approximate model to simulate tip-enhanced Raman scattering (TERS) spectra of a single-molecule in a nanocavity plasmon (NCP) field induced by the tip-substrate system. In this program, the inhomogeneous field can be described by a Gaussian function or any other user-defined real field. It should be noticed that the scattered field is processed in a simple way following the optical reciprocity theorem, and the "true" radiation process can be introduced through the far-field Green's function, which will be included in future versions of the program. The necessary information on the single-molecule vibrations is read from the output file (.fch or .fchk) calculated by the Gaussian package. This program follows the procedure described in the paper J. Raman Spectrosc. 52:296–309 (2021)., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Problems seeded in the past: lagged effects of historical land-use changes can cause an extinction debt in long-lived species due to movement limitation [Software]

  • Jiménez-Franco, María V.
  • Graciá, Eva
  • Rodríguez-Caro, Roberto C.
  • Anadón, José D.
  • Wiegand, Thorsten
  • Botella, Francisco
  • Giménez Casalduero, Andrés
This zip file contains the code of the individual-based model STEPLAND, its parameterisation and the main results shown in the paper “Problems seeded in the past: lagged effects of historical land-use changes can cause an extinction debt in long-lived species due to movement limitation” (published by Landscape Ecology), Spanish Ministry of Science through Projects PID2019‐105682RA‐I00/AEI/10.13039/5011 00011033 and CGL2015‐64144 (the latter supported by the European Regional Development Fund, MINECO/FEDER, UE)., Biodiversity Foundation and the OECC of the Ministry for Ecological Transition and the Demographic Challenge of the Government of Spain (Project CORREDOR, call 2020 for the Evaluation of Spanish Terrestrial Biodiversity)., M.V.J.F. was supported by the Regional Valencian Government and the European Social Fund with a postdoctoral grant (APOSTD/2018/043)., M.V.J.F. was supported by a postdoctoral grant “Juan de la Cierva-Incorporación” research contract from the Spanish Ministry of Economy and Competitiveness (Reference IJC2019-039145-I)., R.C.R.C. was supported by the Regional Valencian Government and the European Social Fund with a postdoctoral grant (APOST/2020/090)., J.D.A. was supported by a Ramón y Cajal contract (RYC-2017-22783) co-funded by the Spanish Ministry of Science, the Agencia Estatal de Investigación and the European Social Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Regional differences in thermoregulation between two European butterfly communities [Software]

  • Toro-Delgado, Eric
  • Vila, Roger
  • Talavera, Gerard
  • Turner, Edgar
  • Hayes, Matthew
  • Horrocks, Nicholas
  • Bladon, Andrew
The “Scripts” folder contains: The “Analysis” folder, with several R scripts with the required code to reproduce all statistical analyses. This was originally done with R 4.1.3. The "worldclim_analysis.R" script can be used to reproduce the analysis of WorldClim data to characterise the climate of both Catalonia and Great Britain; the "GAM_models_buffering_mechanisms" can be used to reproduce the GAM models; the "Master_script.R" script contains the rest of analyses. The “CAMS_solar_radiation_data_download” folder, with multiple Python scripts used to automate the download of the solar radiation data from CAMS. Note that, to be able to use these, the reader will have to register on the CAMS website and obtain access credentials, and then replace the “credentials_file” variable at the beginning of each Python script with the path to the file containing the credentials. More details are available at: https://ads.atmosphere.copernicus.eu/api-how-to, Understanding how different organisms cope with changing temperatures is vital for predicting future species' distributions and highlighting those at risk from climate change. As ectotherms, butterflies are sensitive to temperature changes, but the factors affecting butterfly thermoregulation are not fully understood. We investigated which factors influence thermoregulatory ability in a subset of a Mediterranean butterfly community. We measured adult thoracic temperature and environmental temperature (787 butterflies; 23 species) and compared buffering ability (defined as the ability to maintain a consistent body temperature across a range of air temperatures) and buffering mechanisms to previously published results from Great Britain. Finally, we tested whether thermoregulatory ability could explain species' demographic trends in Catalonia. The sampled sites in each region differ climatically, with higher temperatures and solar radiation but lower wind speeds in the Catalan sites. Both butterfly communities show nonlinear responses to temperature, suggesting a change in behaviour, from heat-seeking to heat avoidance, at approximately 22 °C. However, the communities differ in the use of buffering mechanisms, with British populations depending more on microclimates for thermoregulation compared to Catalan populations. Contrary to the results from British populations, we did not find a relationship between region-wide demographic trends and butterfly thermoregulation, which may be due to the interplay between thermoregulation and the habitat changes occurring in each region. Thus, although Catalan butterfly populations seem to be able to thermoregulate successfully at present, evidence of heat avoidance suggests this situation may change in the future., Funding provided by: Spanish National Research Council Crossref Funder Registry ID: https://ror.org/02gfc7t72 Award Number: JAEINT_20_00248, Funding provided by: Departament de Recerca i Universitats Crossref Funder Registry ID: https://ror.org/01gbnem66 Award Number: FI-1 00556, Funding provided by: Ministerio de Ciencia, Innovación* Crossref Funder Registry ID: Award Number: PID2020-117739GA-I00 MCIN / AEI / 10.13039/501100011033, Funding provided by: Isaac Newton Trust Crossref Funder Registry ID: https://ror.org/02gn6ta77 Award Number: RG89529, Funding provided by: Wellcome Trust Crossref Funder Registry ID: https://ror.org/029chgv08 Award Number: RG89529, Funding provided by: University of Cambridge Crossref Funder Registry ID: https://ror.org/013meh722 Award Number: RG89529, Funding provided by: Natural Environment Research Council Crossref Funder Registry ID: https://ror.org/02b5d8509 Award Number: NE/V007173/1, Funding provided by: Ministerio de Ciencia, Innovación y Universidades Crossref Funder Registry ID: http://dx.doi.org/10.13039/100014440 Award Number: FPU22/02358, Funding provided by: European Social Fund Plus Crossref Funder Registry ID: http://dx.doi.org/10.13039/501100004895 Award Number: FI-1 00556, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Frugivore-mediated seed dispersal in fragmented landscapes: Compositional and functional turnover from forest to matrix [Software]

  • González-Varo, Juan P.
  • Albrecht, Jörg
  • Arroyo, Juan M.
  • Bueno, Rafael S.
  • Burgos, Tamara
  • Escribano-Ávila, Gema
  • Farwig, Nina
  • García, Daniel
  • Illera, Juan Carlos
  • Jordano, Pedro
  • Kurek, Przemysław
  • Rösner, Sascha
  • Virgós, Emilio
  • Sutherland, William J.
Seed dispersal by frugivores is a fundamental function for plant community dynamics in fragmented landscapes, where forest remnants are typically embedded in a matrix of anthropogenic habitats. Frugivores can mediate both connectivity among forest remnants and plant colonization of the matrix. However, it remains poorly understood how frugivore communities change from forest to matrix due to the loss or replacement of species with traits that are less advantageous in open habitats, and whether such changes ultimately influence the composition and traits of dispersed plants via species interactions. Here, we close this gap by using a unique dataset of seed-dispersal networks that were sampled in forest patches and adjacent matrix habitats of seven fragmented landscapes across Europe. We found a similar diversity of frugivores, plants and interactions contributing to seed dispersal in forest and matrix, but a high turnover (replacement) in all these components. The turnover of dispersed seeds was smaller than that of frugivore communities because different frugivore species provided complementary seed dispersal in forest and matrix. Importantly, the turnover involved functional changes towards larger and more mobile frugivores in the matrix, which dispersed taller, larger-seeded plants with later fruiting periods. Our study provides a trait-based understanding of frugivore-mediated seed dispersal through fragmented landscapes, uncovering non-random shifts that can have cascading consequences for the composition of regenerating plant communities. Our findings also highlight the importance of forest remnants and frugivore faunas for ecosystem resilience, demonstrating a high potential for passive forest restoration of unmanaged lands in the matrix., Funding provided by: European Commission Crossref Funder Registry ID: http://dx.doi.org/10.13039/501100000780 Award Number: H2020-MSCA-IF-2014-656572, Funding provided by: Agencia Estatal de Investigación Crossref Funder Registry ID: http://dx.doi.org/10.13039/501100011033 Award Number: RYC-2017-22095, Funding provided by: Agencia Estatal de Investigación Crossref Funder Registry ID: http://dx.doi.org/10.13039/501100011033 Award Number: PID2019-104922GA-I00, Funding provided by: Gobierno del Principado de Asturias Crossref Funder Registry ID: http://dx.doi.org/10.13039/100011941 Award Number: IDI/2018/000151, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Synergistic Bactericidal Effects between Quaternary Ammonium Compounds and Essential Oil Constituents: MathModels&Data

  • Pedreira, Adrián
  • Vázquez, José Antonio
  • García, Miriam R.
Data are provided in the Excel file "qac_eoc_tck_data.xlsx" and in the Matlab file "get_data.m" (with only relevant data for model calibration). Model parameter estimations and simulations are run by calling "main.m" in Matlab. Results can be also seen without running the code in results.fig/mat/xlsx, This repository provides data (📈) and mathematical models (🖳) to study the Synergistic Bactericidal Effects between Quaternary Ammonium Compounds and Essential Oil Constituents, This research was funded by Xunta de Galicia under grants IN606A-2020/028 and IN607B 2023/24; by MCIN/AEI/10.13039/501100011033 and "ERDF A way of making Europe" under grant PID2022-136817OB-I00; and by national funds by FCT – Foundation for Science and Technology under research grants EXPL/MED-QUI/1156/2021, LA/P/0045/2020 (ALiCE), UIDB/00511/2020, UIDP/00511/2020 (LEPABE), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Code generated to analyze the dynamics of Orsay virus accumulation and the C. elegans responses within the course of an infection

  • Elena, Santiago F.
  • Olmo-Uceda, Maria J.
A) PREPROCESS AND ALIGN READS (preDEA) 1.Preprocess fastq files with bbduk.sh: preprocessOrV.sh 2.Align and quantify gene expression with STAR: alignN2.sh B) Differential Expression Analysis and related 1.Create count matrix from individual STAR count files: prepareCountMatrix.R 2. DEA: DEA.R 3. Correlated/anticorrelated genes: correlationLog2FCwVirus.R 4. Comparison analysis: comparisonAnalysis.R C) VISUALIZATION: code to create the plots Main figures: fig1.R, fig2.R, fig3.R, fig4.R, fig5.R and fig6.R, Contributors: Project leader: Elena, Santiago. Researchers: Castiglioni, Victoria; Olmo-Uceda, María José; Legarda, Esmeralda; Muñoz-Sánchez, Juan Carlos; Villena-Giménez, Ana., Agencia Estatal de Investigación: InHAVENPID2022-136912NB-I00. Generalitat Valenciana: HAVENCIPROM/2022/59 Agencia Estatal de Investigación: Juan de la Cierva FJC2021-047264-I Ministerio de Ciencia, Innovación y Universidades Formación Profesorado Universitario FPU2019/05246 and FPU2021/00410 Generalitat Valenciana Formación Personal Investigador ACIF/2021/296 European Space Agency SpaceWorms4000135960/21/NL/GLC/my, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

AISAD, Artificial Intelligence-assisted Synthesis toolbox for Analog/Digital interfaces

  • Liñán-Cembrano, Gustavo
  • Rosa, José M. de la
Version: v1.0. -- Copyright (c) 2025 IMSE-CNM (CSIC-Univ. of Seville) AI-Supported Microelectronic Design Group. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. The software is provided "as is", without warranty of any kind, express or implied, including but not limited to the warranties of merchantability, fitness for a particular purpose and noninfringement. in no event shall the authors or copyright holders be liable for any claim, damages or other liability, whether in an action of contract, tort or otherwise, arising from, out of or in connection with the software or the use or other dealings in the software., AISAD (Artificial Intelligence-assisted Synthesis toolbox for Analog/Digital interfaces) is a MATLAB-based software toolkit enhanced with artificial neural networks for the design of Sigma-Delta Modulators (SDMs). It supports designers in finding suitable architectures and parameters that meet given performance specifications. AISAD integrates a Graphical User Interface (GUI) and allows inverse regression and classification-based synthesis, enabling both novice and expert users to perform design space exploration and validation through simulation. It includes support for behavioral validation via SIMSIDES. Noteworthy features include automated model training pipelines, inverse prediction (from specs to design parameters), and behavioral validation of results., This work was supported in part by Grants PID2022-138078OB-I00, and PDC2023-145808-I00, funded by MCIN/AEI/10.13039/501100011033,Ministry for Digital Transformation and Public Function through grant USECHIP (TSI-069100-2023-001) of PERTE Chip Chair program, by the European Union NextGenerationEU/PRTR, by ERDF A way of making Europe, and by CSIC AI-Hub initiative (CSIC Interdisciplinary Thematic Platform on Artificial Intelligence)., File List: - `PROCESSING/`: scripts for dataset preparation and visualization. - `CLASSIFIERS/`: Python modules for model training and evaluation. - `REGRESSION-ANN/`: TensorFlow/Keras scripts for regression. - `VALIDATION/`: modules for behavioral validation and cross-validation. - `GUI/`: MATLAB files for the graphical interface. - `MODELS/`: Simulink models used in simulations. - `SPECS_PREDICTOR_ANN/`: tools for inverse prediction. - `requirements.txt`: list of required Python packages., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Integrating genomics and biogeography to unravel the origin of a mountain biota: The case of a reptile endemicity hotspot in Arabia

  • Burriel-Carranza, Bernat
  • Tejero-Cicuéndez, Héctor
  • Carné, Albert
  • Mochales-Riaño, Gabriel
  • Talavera, Adrián
  • Al Saadi, Saleh
  • Els, Johannes
  • Šmíd, Jiří
  • Tamar, Karin
  • Tarroso, Pedro
  • Carranza, Salvador
[Methods] Raw ddRADseq demultiplexed reads are available and can be processed with ipyrad (https://ipyrad.readthedocs.io/). Supplementary figures, supplementary tables datasets and tree files are uploaded as separate files., Advances in genomics have greatly enhanced our understanding of mountain biodiversity, providing new insights into the complex and dynamic mechanisms that drive the formation of mountain biotas. These span from broad biogeographic patterns to population dynamics and adaptations to these environments. However, significant challenges remain in integrating large-scale and fine-scale findings to develop a comprehensive understanding of mountain biodiversity. One significant challenge is the lack of genomic data, particularly in historically understudied arid regions where reptiles are a particularly diverse vertebrate group. In the present study, we assembled a de novo genome-wide SNP dataset for the complete endemic reptile fauna of a mountain range (19 described species with more than 600 specimens sequenced), and integrated state-of-the-art biogeographic analyses at the population, species and community level. Thus, we provide for the first time a holistic integration of how a whole endemic reptile community has originated, diversified and dispersed through a mountain system. Our results show that reptiles independently colonized the Hajar Mountains of southeastern Arabia 11 times. After colonization, species delimitation methods suggest high levels of within-mountain diversification, supporting up to 49 putative species. This diversity is strongly structured following local topography, with the highest peaks acting as a broad barrier to gene flow among the entire community. Surprisingly, orogenic events do not seem key drivers of the biogeographic history of reptiles in this system. Instead, past climatic events seem to have had a major role in this community assemblage. We observe an increase of vicariant events from Late Pliocene onwards, coinciding with an unstable climatic period of rapid shifts between hyper-arid and semiarid conditions that led to the ongoing desertification of Arabia. We conclude that paleoclimate, and particularly extreme aridification, acted as a main driver of diversification in arid mountain systems which is tangled with the generation of highly adapted endemicity. Overall, our study does not only provide a valuable contribution to understanding the evolution of mountain biodiversity, but also offers a flexible and scalable approach that can be reproduced into any taxonomic group and at any discrete environment., Funding provided by: MCIN/AEI/10.13039/501100011033* Crossref Funder Registry ID: Award Number: PGC2018-098290-B-I00 (MCIU/AEI/FEDER, UE) Funding provided by: ERDF, A way of making Europe* Crossref Funder Registry ID: Award Number: PID2021-128901NB-I00 Funding provided by: Ministerio de Ciencia e Innovación Crossref Funder Registry ID: https://ror.org/05r0vyz12 Award Number: FPU18/04742 Funding provided by: CaixaBank Crossref Funder Registry ID: https://ror.org/03zhx9h04 Award Number: LCF/BQ/DR20/11790007 Funding provided by: MCIN/AEI/10.13039/501100011033* Crossref Funder Registry ID: Award Number: FJC2021-046832-I Funding provided by: Fundação para a Ciência e Tecnologia Crossref Funder Registry ID: https://ror.org/00snfqn58 Award Number: DL57/2016/CP1440/CT0008 Funding provided by: Czech Science Foundation Crossref Funder Registry ID: https://ror.org/01pv73b02 Award Number: 22-12757S Funding provided by: Charles University Research Centre* Crossref Funder Registry ID: Award Number: 204069 Funding provided by: Ministerio de Ciencia e Innovación Crossref Funder Registry ID: https://ror.org/05r0vyz12 Award Number: PRE2019-088729, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

GeoNames Excel Mapper (GEM)

  • Sánchez-García, Patricia
This Python script is a functional batch geocoding tool designed to efficiently find geographic coordinates for a large number of locations. It reads place names directly from a specified column in a Microsoft Excel file, queries the GeoNames API to fetch their latitude and longitude, and writes the enriched data (name, country, coordinates, and a direct link) for each location to a new Excel file. The tool handles ambiguous place names by allowing the user to configure the maximum number of results. It eliminates the need for manual searchs., This work was supported by Ramon y Cajal Fellowship and the publication is one of the results of a research project on the reception of ancient sculpture in Islamic context, funded by the IH/CSIC [grant number 20231AT027].18 J. ELICES OCÓN, No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Virtual Representation of Fresh Produce Washing in 4.0 Industry through optimal experimental design: MathModels&Data (🖳📈)

  • Moreno-Razo, Ari S.
  • García, Miriam R.
The scripts are developed in the MATLAB environment and utilize the AMIGO2 toolbox for optimization and optimal experimental design. AMIGO2 can be downloaded from https://sites.google.com/site/amigo2toolbox and should be placed alongside the repository files., This repository provides data (📈) and code (🖳) associated with the study: Moreno-Razo, Ari S., et al. "Virtual Representation of Fresh Produce Washing in 4.0 Industry: Modelling and Calibration through Optimal Experimental Design" Innovative Food Science & Emerging Technologies (2025): 104307. https://doi.org/10.1016/j.ifset.2025.104307, This work was funded by EFSA, Contract number OC/EFSA/BIOCONTAM/2021/02 on “Microbiological hazards associated with the use of water in the post-harvest handling and processing operations of fresh and frozen fruits, vegetables and herbs (ffFVHs)” and the opinions expressed are those of the contractors only and do not represent the contracting authority’s (EFSA’s) official position. We thank the grants PID2022-136817OB-I00 funded by MCIN/AEI/10.13039/501100011033/FEDER and the grant IN607B 2023/04 by Xunta de Galicia, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Insectivore diet and abundance determine the contribution of bird species to services and disservices in an agricultural ecosystem [Software]

  • Jiménez-Albarral, José Javier
  • Morán-López, Teresa
  • Illera, Juan Carlos
  • Miñarro, Marcos
  • García, Daniel
Insectivorous birds provide an essential ecosystem service in agriculture by feeding on arthropods considered pests but can also consume arthropods considered to be natural enemies of such pests. Therefore, depending on the dietary composition of the birds, intraguild predation could outweigh pest control services. This study addressed the agronomic quality, defined as the trade-off between ecosystem services (pest control) and disservices (intraguild predation), of 26 insectivorous bird species in culturally and economically important cider apple orchards in northern Spain. We used DNA-metabarcoding techniques to analyze bird' diets. First, we examined whether the trophic position of bird species can be inferred from functional traits related to foraging and movement behavior and from the degree of insectivory in their diets. Then, we tested whether bird abundance and trophic position influenced agronomic quality, based on the proportion of arthropod crop pests and natural enemies in their diet. Finally, we combined bird abundance, insectivory and agronomic quality to infer the potential contribution of each bird species to pest control. Bird trophic position was positively related to the degree of insectivory, with this effect being modulated by traits related to body size. The trophic position of birds was inversely related to their agronomic quality. Nevertheless, the agronomic quality only slightly affected the differential contribution of bird species to the whole assemblage effect. Overall, we found the potential of insectivorous bird species to control pests can be estimated based on their trophic position. Yet, in agroecosystems with uneven avian species abundance, the potential contribution of bird species to pest-control services may be driven by their quantitative contribution rather than by the bird's per capita, qualitative effects. Finally, our results suggest that rare insectivorous birds may have a redundant role in pest control, due to the overwhelming functional dominance of common species., Funding provided by: Fundación BBVA ROR ID: https://ror.org/01jzs3b90 Award Number: ClaveSER 044-2019; Funding provided by: Gobierno del Principado de Asturias ROR ID: https://ror.org/05mj4yh71 Award Number: IDI/2018/000151; Funding provided by: Agencia Estatal de Investigación ROR ID: https://ror.org/003x0zc53 Award Number: PID2020-120239RR-100; Funding provided by: Agencia Estatal de Investigación ROR ID: https://ror.org/003x0zc53 Award Number: PRE2021-096887; Funding provided by: Agencia Estatal de Investigación ROR ID: https://ror.org/003x0zc53 Award Number: IJC2020-043765-I, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Arabic Similarity Search Tool for the OpenITI Corpus (SimilArITI) (v1.0)

  • Sánchez-García, Patricia
SimilArITI is a Python-based tool designed to identify textually similar passages across a corpus of Arabic works, mainly the OpenITI Corpus. It operates in two distinct phases: 1) an indexing phase, in which texts are preprocessed, segmented into fragments, and represented using TF-IDF vectorization at the fragment level; and 2) a search phase, in which a user-defined reference text is compared against the indexed fragments using cosine similarity., The software is particularly intended for digital humanities research on Arabic textual traditions, enabling the detection of parallels, thematic echoes, and reused narrative material across works. A set of preprocessed works is provided to allow immediate use, while the indexing script enables users to extend the corpus with additional texts. The current version represents a functional first release, with future refinements planned for fragment segmentation strategies and similarity modeling., It has been developed, used and refined during the course of the following projects: -«Spolia omeyas: la construcción transcultural de la legitimidad, memoria e identidad en las Sociedades Medievales Peninsulares» (PID 2023-151798NA-100) -«Recepción de la escultura antigua en el Islam: fuentes árabes y base de datos» (PIE20231AT027). -«Orientalismo en España, ss. XVI-XVIII: de la polémica religiosa a la institucionalización» (PID2021-126158NB-I00). -«Orientalismo y verdad: la influencia de la erudición oriental en el desarrollo del pensamiento crítico en la España Moderna» (FFI2017-86538-P), No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

OpenITI Regex Search Explorer (ReSearchITI) (v1.0)

  • Sánchez-García, Patricia
ReSearchITI is a Python-based research tool designed for the systematic exploration of Arabic textual corpora, particularly focused on the OpenITI corpus. The software enables users to perform context-aware searches based on a primary search pattern combined with optional contextual filters, extract relevant text fragments with configurable context windows, and organize the results into a structured Excel file enriched with metadata., Key features include: 1) Regex-based primary and contextual search patterns. 2) Configurable context extraction by number of lines. 3) Optional cleaning of OpenITI mARkdown structural and semantic tags. 4) Automatic grouping and deduplication of results by author and work. 5) Optional automatic translation of extracted fragments into a target language. 6) Optional word alignment-based or manual highlighting in both source text and translation. 7) Rich-text Excel output with color-coded highlights and metadata columns., The software is intended as an exploratory and research-oriented tool for philological, historical, linguistic, and textual analysis. It is under active development and may evolve with additional features and refinements., It has been developed, used and refined during the course of the following projects: -«Spolia omeyas: la construcción transcultural de la legitimidad, memoria e identidad en las Sociedades Medievales Peninsulares» (PID 2023-151798NA-100) -«Recepción de la escultura antigua en el Islam: fuentes árabes y base de datos» (PIE20231AT027). -«Orientalismo en España, ss. XVI-XVIII: de la polémica religiosa a la institucionalización» (PID2021-126158NB-I00). -«Orientalismo y verdad: la influencia de la erudición oriental en el desarrollo del pensamiento crítico en la España Moderna» (FFI2017-86538-P)., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Lexicon from Excel to Word (ExLex) (v1.0)

  • Sánchez-García, Patricia
ExLex is a Python-based tool designed to automate the conversion of lexicographical data stored in Excel spreadsheets into formatted Microsoft Word documents. It is specifically tailored for researchers in humanities and linguistics who need to generate dictionaries, glossaries, or editions of manuscripts. Key features: a) Customizable group headers for folios or alphabetical sections. b) Customizable elements of the entry per data block. c) Precise typographical control (bold, italics, font sizing, etc.) per data block. d) Generate Word documents with or without a template (margins, line spacing) e) Automatic footnote insertion. f) Automatically handle left-to-right (LTR) and right-to-left (RTL) scripts., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Data from: Species introductions shift seed dispersal potential more than extinctions across 120 island plant–frugivore communities

  • Heinen, Julia H.
  • Drake, Donald R.
  • McConkey, Kim
  • Hume, Julian P.
  • Albert, Sébastien
  • Ando, Haruko
  • Baider, Cláudia
  • Bellingham, Peter J.
  • Case, Samuel B.
  • Chimera, Charles G.
  • Vincent Florens, F. B.
  • Fricke, Evan C.
  • Gawel, Ann Marie
  • González-Castro, Aarón
  • Heleno, Rubén H.
  • Hervías-Parejo, Sandra
  • Hruska, Amy
  • Imada, Clyde T.
  • Lima, Ricardo F. de
  • Nogales, Manuel
  • Rogers, Haldre S.
  • Rumeu, Beatriz
  • Strasberg, Dominique
  • Traveset, Anna
  • Valido, Alfredo
  • Watanabe, Kenta
  • Wotton, Debra
  • Yoshikawa, Tetsuro
  • Rahbek, Carsten
  • Borregaard, Michael K.
These databases were created by the Frugivory on Islands Globally (FIG) consortium, a group of more than 30 (local) island experts, through over a decade of work. We would very much appreciate being involved in future work using this data (contact: islandextinctions@gmail.com). These databases, spanning 120 oceanic islands within 22 archipelagos worldwide, consist of insular frugivorous birds, mammals, and reptiles (native, extinct, and introduced; 3,050 occurrences of 613 unique species), fleshy-fruited plants (4,026 occurrences of 1,784 unique species), and their morphological and behavioural traits related to seed dispersal. For frugivores, traits include seed handling, habitat use, diet, gape size, body mass, animal class, percentage fruit in diet; for plants, seed length and width. R scripts are archived at Zenodo (https://doi.org/10.5281/zenodo.16986851), and accessible via GitHub (https://github.com/JHHeinen/120-Island-frugivore-communities/)., Funding provided by: Carlsberg Foundation ROR ID: https://ror.org/01kpjmx04 Award Number: CF23-0890 Funding provided by: Danish National Research Foundation ROR ID: https://ror.org/00znyv691 Award Number: DNRF96 Funding provided by: Carlsberg Foundation ROR ID: https://ror.org/01kpjmx04 Award Number: CF19-0695 Funding provided by: Villum Fonden ROR ID: https://ror.org/05nqkay65 Award Number: 25925 Funding provided by: The New Zealand Ministry of Business, Innovation, and Employment Endeavour Fund programme Te Mana o Rangitāhua Crossref Funder Registry ID: Award Number: Funding provided by: Gerrit Parmile Wilder Endowed Chair in Botany at the University of Hawai'i Crossref Funder Registry ID: Award Number: Funding provided by: Fundação para a Ciência e Tecnologia ROR ID: https://ror.org/00snfqn58 Award Number: UID/BIA/00329/2023 Funding provided by: Fundação para a Ciência e Tecnologia ROR ID: https://ror.org/00snfqn58 Award Number: LA/P/0121/2020 Funding provided by: Fundação para a Ciência e Tecnologia ROR ID: https://ror.org/00snfqn58 Award Number: 10.54499/UIDB/04004/2020 Funding provided by: Fundação para a Ciência e Tecnologia ROR ID: https://ror.org/00snfqn58 Award Number: 10.54499/LA/P/0092/2020 Funding provided by: Ministerio de Ciencia, Innovación y Universidades ROR ID: https://ror.org/05r0vyz12 Award Number: PGC2018-099772-B-I00 Funding provided by: Ministerio de Ciencia, Innovación y Universidades ROR ID: https://ror.org/05r0vyz12 Award Number: PID2023-152357NB-I00, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

DeQuDyApp. The Deciphering Qur’anic App

  • Guerrero Enterría, Arturo
The app resulting of this software is available at https://dequby.cchs.csic.es/, The DeQuDyApp is an UI for accessing the data of the Deciphering Qur’anic Dynamics project. This software connects the MongoDB database at the backoffice. It is designed in JavaScript using the NodeJS framework., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Aruize / PTML-Nanocatalysts

  • Ruiz-Escudero, Andrea
  • Serna-Burgos, Zuriñe
  • Arrasate, Sonia
  • González-Díaz, Humberto
IKERDATA S.L. INVESTIGO program grant (2022/IKER/000040), funded by LANBIDE and European Commission, NextGenera-tionEU, Grant PID2022-137365NB-100 (2023-2026) funded by MCIN/AEI/10.13039/501100011033, and ELKARTEK 2022 grant (KK-2022/00032) and IT1558-22 grant (2022-2025), funded by Basque Government/Eusko Jaurlaritza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

HoFa (v.0.1.0)

  • Candela Pokorna, Pablo
  • González-Sánchez, Diego
  • Szegedy, Balázs
Multiplataforma (Windows, Linux, Mac), lenguaje de programación: Python (funcionalidad principal) y ReStruturedText (documentación), Se incluye en el paquete los siguientes ficheros: full-environment.yml para crear un environment en Conda para asegurar la reproducibilidad de todos los ejemplos; environment.yml para tener una versión simplificada del anterior; requirements-full.txt con una lista exhastiva de todos los paquetes instalados en el entorno de desarrollo y prueba del software; requirements.txt para una versión simplificada de lo anterior. Licencias: Apache License 2.0 para todo el repositorio (https://www.apache.org/licenses/LICENSE-2.0), CC-BY para la documentación que los autores pondrán en la web (https://creativecommons.org/licenses/by/4.0/), This software package implements theoretical tools in higher-order Fourier analysis, developed mainly by the authors in the paper "Spectral Algorithms in Higher-Order Fourier Analysis" (arXiv: 2501.12287, to appear in Forum of Mathematics, Sigma). The tools address challenges in the spectral analysis of complex functions or signals, by extending classical Fourier methods to higher-order contexts. Key Features and Functionality: - Provides a Python implementation of the algorithms and theoretical concepts from both higher-order Fourier analysis and the aforementioned paper, including natural extensions of existing results. The main key functionalities are: 1) Methods to compute the Gowers norms of functions. 2) Denoise signals with respect to higher-order structure. 3) Decompose signals into their higher-order components. - Offers comprehensive documentation to make the theory accessible to a broad audience, including non-mathematicians, engineers, and researchers. Motivation: To our knowledge, no other software is dedicated to higher-order Fourier analysis with this algorithmic approach. Existing spectral analysis tools (e.g., FFT libraries) do not cover the higher-order properties addressed here. This package fills a gap by providing a practical toolkit to explore and apply these theoretical concepts, paving the way for future real-world applications. While the associated paper does not present specific applications, the software is designed to facilitate their development. Structure: The package is structured into two main components: on one hand, the Python code, which develops in different modules the aforementioned functionality, and on the other hand the documentation in ReStructuredText Format, which provides installation guides, introductory material, tutorials, user-guides, API-references, and mathematical background in order to use the software., This work was supported by project PID2024-156180NB-I00 funded by Spain’s MICIU/AEI. The second-named author was supported by HORIZON-MSCA-2024-PF-01, AlgHOF 101202161, funded by the European Union. The third-named author was supported by the Hungarian Ministry of Innovation and Technology NRDI Office within the framework of the Artificial Intelligence National Laboratory Program (MILAB, RRF-2.3.1-21-2022-00004)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation CEX-2023-001347-S., No, Sin experimentacion animal ni uso de NAMs