Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 456
Encontrada(s) 5 página(s)

DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publication Artículo científico (JournalArticle)

Mining for Perchlorate Resistance Genes in Microorganisms From Sediments of a Hypersaline Pond in Atacama Desert, Chile

  • Díaz Rullo, J.
  • Rodríguez Valdecantos, G.
  • Torres Rojas, F.
  • Cid, L.
  • Vargas, I. T.
  • González, B.
  • González Pastor, J. E.
The Supplementary Material for this article can be found online at: https://www.frontiersin.org/articles/10.3389/fmicb.2021.723874/full#supplementary-material, Perchlorate is an oxidative pollutant toxic to most of terrestrial life by promoting denaturation of macromolecules, oxidative stress, and DNA damage. However, several microorganisms, especially hyperhalophiles, are able to tolerate high levels of this compound. Furthermore, relatively high quantities of perchlorate salts were detected on the Martian surface, and due to its strong hygroscopicity and its ability to substantially decrease the freezing point of water, perchlorate is thought to increase the availability of liquid brine water in hyper-arid and cold environments, such as the Martian regolith. Therefore, perchlorate has been proposed as a compound worth studying to better understanding the habitability of the Martian surface. In the present work, to study the molecular mechanisms of perchlorate resistance, a functional metagenomic approach was used, and for that, a small-insert library was constructed with DNA isolated from microorganisms exposed to perchlorate in sediments of a hypersaline pond in the Atacama Desert, Chile (Salar de Maricunga), one of the regions with the highest levels of perchlorate on Earth. The metagenomic library was hosted in Escherichia coli DH10B strain and exposed to sodium perchlorate. This technique allowed the identification of nine perchlorate-resistant clones and their environmental DNA fragments were sequenced. A total of seventeen ORFs were predicted, individually cloned, and nine of them increased perchlorate resistance when expressed in E. coli DH10B cells. These genes encoded hypothetical conserved proteins of unknown functions and proteins similar to other not previously reported to be involved in perchlorate resistance that were related to different cellular processes such as RNA processing, tRNA modification, DNA protection and repair, metabolism, and protein degradation. Furthermore, these genes also conferred resistance to UV-radiation, 4-nitroquinoline-N-oxide (4-NQO) and/or hydrogen peroxide (H2O2), other stress conditions that induce oxidative stress, and damage in proteins and nucleic acids. Therefore, the novel genes identified will help us to better understand the molecular strategies of microorganisms to survive in the presence of perchlorate and may be used in Mars exploration for creating perchlorate-resistance strains interesting for developing Bioregenerative Life Support Systems (BLSS) based on in situ resource utilization (ISRU)., We thank Carolina González de Figueras from the Centro de Astrobiología (Spain) for technical assistance. This research was supported by: (i) the Spanish Ministry of Science, Innovation and Universities (MICINN) PGC2018-096956-B-C42 which also included European Regional Development Fund (FEDER) and FPU18/03583 grant, (ii) the European Commission, Horizon 2020 Framework Programme, Call: H2020-LEIT-BIO-2015-1, Project: METAFLUIDICS, GA 685474, and (iii) the National Agency for Research and Development of Chile (ANID), PIA/BASAL FB0002. JD-R was supported by a FPI fellowship from the Universidad de Alcalá and by a FPU fellowship from the Spanish Ministry of Science, Innovation and Universities (MICINN) FPU 18/03583. Open access publication fee has been funded by Instituto Nacional de Técnica Aeroespacial (INTA)., Peerreview
Docta Complutense
Publication Artículo científico (JournalArticle)

A new fluorescent probe for the visualization of progerin

  • Macicior Michelena, Jon
  • Fernández, Daniel
  • Ortega Gutiérrez, Silvia
Hutchinson-Gilford progeria syndrome (HGPS) or progeria is a rare genetic disease that causes premature aging, leading to a drastic reduction in the life expectancy of patients. Progeria is mainly caused by the intracellular accumulation of a defective protein called progerin, generated from a mutation in the LMNA gene. Currently, there is only one approved drug for the treatment of progeria, which has limited efficacy. It is believed that progerin levels are the most important biomarker related to the severity of the disease. However, there is a lack of effective tools to directly visualize progerin in the native cellular models, since the commercially available antibodies are not well suited for the direct visualization of progerin in cells from the mouse model of the disease. In this context, an alternative option for the visualization of a protein relies on the use of fluorescent chemical probes, molecules with affinity and specificity towards a protein. In this work we report the synthesis and characterization of a new fluorescent probe (UCM-23079) that allows for the direct visualization of progerin in cells from the most widely used progeroid mouse model. Thus, UCM-23079 is a new tool compound that could help prioritize potential preclinical therapies towards the final goal of finding a definitive cure for progeria.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

The influence of aridity on plant intraspecific chemical diversity supports adaptive differentiation and convergent evolution

  • Castells, Eva|||0000-0001-7423-2742
  • Sanchez-Martinez, Pablo|||0000-0002-0157-7800
Plants synthesize a broad array of specialized chemical compounds that mediate their interactions with the surrounding environment. Some of this chemical diversity is functional and subject to natural selection, but the factors underlying chemical evolution at the intraspecific level remain largely unknown. Here, we combined chemical, environmental and genetic data to investigate the effect of aridity on the expression of chemotypes in the invasive shrub Senecio pterophorus. We studied the variation in pyrrolizidine alkaloids (PAs), a group of specialized metabolites widespread across the families Boraginaceae, Asteraceae and Fabaceae, from native populations spanning a cline of aridity and from three cross-continental introductions, under natural and common garden conditions. We examined whether the relationship between chemistry and aridity was compatible with a process of adaptive differentiation using a method that partitions the variance and covariance by controlling for the population neutral genetic structure. We found a consistent shift from retrorsine-like to seneciphylline-like compounds under increasing aridity in both natural and controlled conditions in coherence with the biosynthetic pathways. This pattern was independent of the neutral genetic structure and occurred along the environmental gradient in the native range and in a convergent manner in all nonnative regions, which suggests adaptive differentiation in response to aridity. Our findings show that the diversity of PAs in S. pterophorus has been partially shaped by aridity. Investigating how abiotic factors influence chemical evolution is key to elucidating the plant responses in future climate scenarios and the cascading effects on other trophic levels.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

The introduction of a highly virulent PRRSV strain in pig farms is associated with a change in the pattern of influenza A virus infection in nurseries

  • Domingo Carreño, Ivan|||0009-0001-9927-9069
  • Serena, Maria Soledad
  • Martin-Valls, Gerard|||0000-0003-3302-0692
  • Clilverd, Hepzibar|||0000-0002-4309-7506
  • Aguirre Molins, Laia|||0000-0003-3257-3965
  • Cortey, Martí|||0000-0003-1126-3423
  • Mateu de Antonio, Enrique María|||0000-0003-2715-6032
The present study aimed to determine the dynamics of influenza A virus (IAV) infection in two endemically infected farms (F1 and F2), where a longitudinal follow-up of piglets was performed from birth to 8-12 weeks of age. During the study, a highly virulent isolate of porcine reproductive and respiratory syndrome virus (PRRSV) was introduced on both farms. This allowed us to examine the impact of such introduction on the patterns of infection, disease, and the antibody response of pigs to IAV infection. The introduction of the new PRRSV strain coincided with a change in the dynamics of IAV infection on both farms. In F1, the cumulative incidence of IAV increased from 20% before the outbreak to 67.5%, together with the existence of animals that tested positive for IAV (RT‒qPCR) in nasal swabs for two or more consecutive samples. In F2, the cumulative incidence of IAV increased from 50% before the PRRSV outbreak to 70%, and the proportion of prolonged IAV shedders increased sharply. Additionally, some animals were infected with the same IAV twice during the observation period. In contrast to previous reports, our study revealed that prolonged shedding was not related to the titres of maternally derived antibodies at the time of infection but was significantly (p < 0.05) related to PRRSV infection status. Notably, both before and after the PRRSV outbreak, a high proportion of IAV-infected piglets did not seroconvert, which was significantly (p < 0.05) related to the hemagglutination inhibition titres against IAV when infected.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Selection of viral variants with enhanced transmission and reduced neutralization susceptibility alongside lateral introductions may explain the persistence of porcine reproductive and respiratory syndrome virus in vaccinated breeding herds

  • Clilverd, Hepzibar|||0000-0002-4309-7506
  • Li, Yanli
  • Martin-Valls, Gerard|||0000-0003-3302-0692
  • Aguirre Molins, Laia|||0000-0003-3257-3965
  • Martín Castillo, Margarita|||0000-0003-4370-6700
  • Cortey, Martí|||0000-0003-1126-3423
  • Mateu de Antonio, Enrique María|||0000-0003-2715-6032
This study investigates the long-term evolutionary dynamics of porcine reproductive and respiratory syndrome virus (PRRSV-1) in an endemically infected and vaccinated pig herd. Over a one year and a half period, piglets from seven farrowing batches in a 300-sow PRRSV-vaccinated farm were monitored from birth to nine weeks of age by reverse transcription-quantitative polymerase chain reaction (RT-qPCR). Eighty-five PRRSV-positive samples were subjected to whole genome sequencing (Illumina Miseq), and 251 samples to open reading frame 5 (ORF5) sequencing. Farm-specific PRRSV variants' impact on anti-PRRSV antibodies was evaluated using enzyme-linked immunosorbent and neutralizing antibody assays. The replication kinetics and cytokine inhibition capabilities (IFN-α and TNF-α) of these variants were assessed in porcine alveolar macrophages. The study revealed fluctuating PRRSV-1 incidences in farrowing units and nurseries, attributed to two key evolutionary events: an escape variant emergence and a lateral introduction of a new strain. Initially, strain 1 variant α was swiftly replaced within weeks by variant 1β (99.5 per cent genomic similarity), with twenty-five amino acid mutations, primarily in nsp1α, GP2, GP3, and GP5, including an additional glycosylation site and a deletion downstream the neutralization epitope of GP5. This shift to 1β correlated with increased incidence in nurseries and higher viral loads, with sera from 1α-exposed animals showing reduced neutralization against 1β. Consistently for in vitro assays, variant 1β demonstrated enhanced replication in porcine alveolar macrophages but no difference regarding IFN-α or TNF-α responses. Later, a new strain (strain 2, 83.3 per cent similarity to strain 1) emerged and led to incidence resurgence because of the low cross reactivity with the previous antibodies. The study highlights PRRSV's rapid adaptability and challenges in controlling its spread, underscoring the necessity for more effective vaccines and eradication approaches.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Effect of Longer Pre-Starter Diet Allowance on Post-Weaning Performance of Lightweight Piglets

  • González Solé, Francesc|||0000-0002-3469-6240
  • Solà Oriol, David|||0000-0001-8365-340X
  • Villagómez Estrada, Sandra|||0000-0003-3086-3256
  • Muns, Ramon|||0000-0002-8139-8668
  • Pérez Hernández, José Francisco|||0000-0001-8853-8945
This study evaluated the effects of providing weaning pigs with a pre-starter diet until they reach a target body weight (7.9 kg) before transitioning to a more affordable diet, compared to offering it until a fixed day (10 days post-weaning). Pigs were categorized as medium or small based on their weaning body weight. The results demonstrated that extending the pre-starter diet until a target body weight was achieved did not affect overall growth nor body weight variability but did reduce mortality in small pigs between days 10 and 36. Given that this study was conducted without zinc oxide and with lower protein levels than previous studies, the findings highlight the need to reassess nutritional strategies for improving small pigs' growth and reducing body weight variability. Future research should explore the potential impact of setting a target body weight in the allowance of a starter diet, as well as assess its long-term effects. First-phase diets are formulated to help pigs reach a target body weight before switching to a more affordable diet. However, these transitions typically take place on a fixed schedule, which may disadvantage low-body-weight piglets due to their underdeveloped digestive systems and limited feed intake capacity. This study examined the effects of offering low-body-weight (BW) pigs a pre-starter diet until they reached a target BW on growth performance and BW variability. A total of 528 pigs ([Landrace × Yorkshire] × Pietrain), weaned at day 21, representing the smallest 50% of their batch, were divided into medium (5.35 ± 0.31 kg) and small (3.97 ± 0.21 kg) groups based on weaning BW. Pigs received a pre-starter diet either for 10 days (FIXED) or until they reached a target BW of 7.9 kg (TBW), followed by a starter feed. Growth performance between the TBW and fixed strategies was similar over the 36-day period. Overall, mortality was higher in small pigs, though small pigs fed using the fixed strategy showed higher mortality than the rest of the groups between days 10 and 36. This study concludes that offering a pre-starter diet based on target BW, instead of a fixed time, did not significantly improve growth performance or batch uniformity but reduced mortality in small pigs from days 10 to 36.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Short-term polystyrene nanoplastic exposure alters zebrafish male and female germline and reproductive outcomes, unveiling pollutant-impacted molecular pathways

  • Pujol Infantes, Gala|||0000-0002-3915-4766
  • Marin Gual, Laia|||0000-0003-1480-0976
  • González Rodelas, Laura|||0000-0002-3780-5748
  • Álvarez-González, Lucía|||0000-0001-8154-8614
  • Chauvigné, François|||0000-0001-5571-7517
  • Cerdà, Joan|||0000-0003-2568-6398
  • Teles, Mariana|||0000-0001-5525-4049
  • Roher Armentia, Nerea|||0000-0002-6659-4038
  • Ruiz-Herrera, Aurora|||0000-0003-3868-6151
Nanoplastics pollution is a rising environmental concern whose impacts on biodiversity and human health are far from being understood. This is particularly salient in aquatic ecosystems, where the majority of species depend on external fertilization for reproduction. Here we evaluated the effects of a short-term exposure to engineered polystyrene nanoplastics (NPs) in the zebrafish germline to further explore their impact on reproduction. To this end, zebrafish (Danio rerio) were exposed to 5 mg/L of 45 nm polystyrene (PS)-NPs via water for 96 h. We show that, in males, nanoplastics induced testicular histological alterations with abnormal sperm clustering and chromatin compaction, resulting in viable spermatozoa but with reduced motility. Moreover, in females we observed an alteration in oocyte stages frequencies during oogenesis, possibly reflecting alterations in oocyte growth. RNA-sequencing analysis in male testis links nanoplastic induced alterations in the expression of genes involved in chromatin structure, meiosis and DNA double-strand break formation and repair progression, and gametes recognition. Flow cytometry analysis revealed that the observed effects in males were directly due to nanoplastics penetrating the testicular barrier and being internalized within germline cells. Overall, our results demonstrate that acute exposure to NPs can compromise reproductive fitness, underscoring the environmental and health impacts of NPs pollution.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Increased hydraulic risk in assemblages of woody plant species predicts spatial patterns of drought-induced mortality

  • Sanchez-Martinez, Pablo|||0000-0002-0157-7800
  • Mencuccini, Maurizio|||0000-0003-0840-1477
  • García-Valdés, Raúl|||0000-0001-6399-4709
  • Hammond, William M.
  • Serra Díaz, Josep M|||0000-0003-1988-1154
  • Guo, Wen-Yong|||0000-0002-4737-2042
  • Segovia, Ricardo A.|||0000-0002-8787-619X
  • Dexter, Kyle G|||0000-0001-9232-5221
  • Svenning, Jens-Christian|||0000-0002-3415-0862
  • Allen, Craig|||0000-0002-8777-5989
  • Martínez Vilalta, Jordi|||0000-0002-2332-7298
Predicting drought-induced mortality (DIM) of woody plants remains a key research challenge under climate change. Here, we integrate information on the edaphoclimatic niches, phylogeny and hydraulic traits of species to model the hydraulic risk of woody plants globally. We combine these models with species distribution records to estimate the hydraulic risk faced by local woody plant species assemblages. Thus, we produce global maps of hydraulic risk and test for its relationship with observed DIM. Our results show that local assemblages modelled as having higher hydraulic risk present a higher probability of DIM. Metrics characterizing this hydraulic risk improve DIM predictions globally, relative to models accounting only for edaphoclimatic predictors or broad functional groupings. The methodology we present here allows mapping of functional trait distributions and elucidation of global macro-evolutionary and biogeographical patterns, improving our ability to predict potential global change impacts on vegetation.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Effect of mixing at weaning and nutrient density of the weaner diet on growth performance and welfare of pigs to slaughter

  • González Solé, Francesc|||0000-0002-3469-6240
  • Solà Oriol, David|||0000-0001-8365-340X
  • Pérez Hernández, José Francisco|||0000-0001-8853-8945
  • Lawlor, Peader G.
  • Boyle, Laura A.
  • Garcia Manzanilla, E.
  • Camp Montoro, Jordi|||0000-0002-0547-0752
Background: Mixing pigs at weaning can compromise pig welfare and growth. Therefore, grouping littermates together may allow a diet nutrient and energy density reduction during the nursery period to reduce feed cost without affecting slaughter weight. This study investigated the combined effect of mixing and reducing dietary energy and nutrient density on growth performance, body lesions (BL), and behaviour in pigs from weaning to slaughter. Results: Forty-eight litters [554 pigs, 11-12 pigs/litter; Danish Duroc × (Large White × Landrace)] were included in the trial. At 28 days of age, pigs were weaned and housed in nursery rooms in litter groups (INTACT, n = 24) or mixed with other litters and grouped by weight to reduce within-pen pig weight variation (MIXED, n = 24). A dietary regimen meeting pigs' nutritional requirements (CON) and a low-density dietary regimen (LOW; -10% energy and protein) completed a 2 × 2 factorial arrangement (Mixing x Diet, n = 12). On day 74 of age, pigs moved to the grower-finisher accommodation without further mixing and all pigs received the CON dietary regimen. Mixing increased FCR by 4.0% during the nursery period (p = 0.003). Nursery pigs fed LOW experienced a growth retardation which was maintained until slaughter (-2.6 kg slaughter weight; p = 0.025). Initial differences in the coefficient of variation (CV) between MIXED (10.4%) and INTACT (17.6%; p < 0.001) pigs were reduced in CON pens but not in LOW pens (interaction p = 0.025) at the end of the nursery period. MIXED pigs had more fights and BL (p < 0.001) at weaning and showed more aggression (p = 0.003) after being moved to the grower-finisher rooms. At the end of the nursery period, MIXED pigs fed LOW showed the highest number of aggressive behaviours around the feeder (interaction; p = 0.003) and pigs fed LOW showed more damaging behaviour (p < 0.001). Conclusions: Mixing animals at weaning had limited impact on growth performance but impaired welfare which was aggravated by energy and nutrient reduction in the nursery diet. Decreasing dietary nutrient density in the nursery stage retarded growth, which could not be compensated for during the growing-finishing period.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

LGBT Climate Inventory in Corporations for Straight People?, ¿Un inventario del clima LGBT en las empresas para personas heterosexuales?

  • Freude, Leon|||0000-0003-2284-9817
  • Bonet Martí, Jordi|||0000-0002-8863-3202
Open societies are eager to accommodate sexual and gender diversity at work. The Lesbian, Gay, Bisexuals and Trans Climate Inventory (LGBTCI) is an instrument measuring organizational climate towards sexual and gender diversity, relying on the opinion of LGTB people. We argue that non-LGTB employees also perceive a climate towards sexual and gender diversity, and therefore include them to measure LGBT-friendly climate at work. By means of a Multiple Correspondence Analysis (MCA) we validate this application of the LGBTCI obtaining two factors: first, comprehension of the items linked to sexual and gender diversity; second, positioning with respect to the climate. We contribute to existing research claiming that non-LGBT employees should be incorporated in the measurement of the climate., Las sociedades abiertas se caracterizan por su deseo de acoger la diversidad sexual y de género en los lugares de trabajo. En este sentido, el Inventario de Clima para Lesbianas, Gays, Bisexuales y Trans (LGBTCI) es un instrumento que mide el clima organizacional hacia la diversidad sexual y de género, basándose en la opinión de las personas LGTB. En este artículo, argumentamos que los empleados no LGTB también pueden percibir el clima hacia la diversidad sexual y de género y, por lo tanto, los hemos incluido para medir el clima favorable a las personas LGTB en el trabajo. Mediante un Análisis de Correspondencias Múltiples (ACM) hemos validado esta aplicación del LGBTCI obteniendo dos factores: la comprensión de los ítems vinculados a la diversidad sexual y de género, y el posicionamiento respecto al clima. Este artículo supone una contribución a las investigaciones previas que consideraban que los empleados no LGBT no deberían ser incorporados a la medición del clima organizacional en las empresas.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Unveiling the Evolutionary History of European Vipers and Their Venoms From a Multi-Omic Approach

  • Talavera, Adrián|||0000-0002-4007-0965
  • Palmada-Flores, Marc|||0000-0003-0246-5226
  • Martínez-Freiría, Fernando|||0000-0003-2311-8960
  • Mochales-Riaño, Gabriel|||0000-0002-9130-2308
  • Burriel Carranza, Bernat|||0000-0001-9832-1782
  • Estarellas, Maria|||0000-0001-7360-6458
  • Fernández-Guiberteau, Daniel
  • Camina, Álvaro
  • Ursenbacher, Sylvain|||0000-0001-5093-6403
  • Vörös, Judit|||0000-0001-9707-1443
  • Halpern, Bálint|||0000-0003-0934-6246
  • Pla, Davinia|||0000-0002-9810-7556
  • Calvete, Juan José|||0000-0001-5026-3122
  • Mikheyev, Alexander S.|||0000-0003-4369-1019
  • Marquès i Bonet, Tomàs|||0000-0002-5597-3075
  • Carranza, Salvador|||0000-0002-5378-3008
Snake genomes attract significant attention from multiple disciplines, including medicine, drug bioprospection, and evolutionary biology. However, genomic research within the Viperidae family has mostly focused on the subfamily Crotalinae, while the true vipers (Viperinae) have largely been overlooked. European vipers (Vipera) have been the subject of extensive research due to their phylogeographic and ecological diversification, as well as their venoms. Nevertheless, phylogeography and systematics in this genus have primarily relied on biased information from mitochondrial genes, which fail to capture the likely effects of introgression and are prone to biases. On the other hand, venom research in this group has been conducted predominantly through proteomics alone. In this study, we generated chromosome-level genome assemblies for three Vipera species and whole-genome sequencing data for 94 samples representing 15 Vipera lineages. This comprehensive dataset allowed us to disentangle the phylogenomic relationships of this genus, affected by mito-nuclear discordance and pervaded by ancestral introgression. Population-level analyses in the Iberian Peninsula, where the three oldest lineages within Vipera meet, revealed signals of recent adaptive introgression between old-diverged and ecologically dissimilar species, whereas chromosomal rearrangements isolate species occupying similar niches. Finally, using transcriptomic and proteomic data, we characterised the Vipera toxin-encoding genes, in which opposing selective forces were unveiled as common drivers of the evolution of venom as an integrated phenotype.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A Targeted Nanotoxin Inhibits Colorectal Cancer Growth Through Local Tumor Pyroptosis and Eosinophil Infiltration and Degranulation

  • Carrasco-Díaz, Luis Miguel|||0000-0003-0567-2802
  • Gallardo, Alberto|||0000-0002-2514-2027
  • Voltà-Durán, Eric|||0000-0003-0017-8274
  • Virgili Manrique, Anna Cristina|||0000-0001-9733-6034
  • Paez, David|||0000-0002-5596-6588
  • Villaverde, Antonio|||0000-0002-2615-4521
  • Vázquez, Esther|||0000-0003-1052-0424
  • Álamo, Patricia|||0000-0003-0510-5701
  • Unzueta Elorza, Ugutz|||0000-0001-5119-2266
  • Casanova Rigat, Isolda|||0000-0002-1196-4724
  • Mangues, Ranib
  • Alba Castellón, Lorena|||0000-0003-3449-7820
Background: Colorectal cancer (CRC) has traditionally been treated with genotoxic chemotherapy to activate pro-apoptotic proteins to induce anticancer effects. However, cancer cells develop resistance to apoptosis, which leads to recurrence and poor prognosis. Moreover, this kind of therapy has been shown to be highly toxic to healthy tissues and, therefore, to patients. To overcome this issue, we developed a self-assembly tumor-targeted nanoparticle, T22-DITOX-H6, that incorporates the T22 peptide (a CXCR4 ligand) to selectively target cells overexpressing CXCR4, fused to the catalytic domain of diphtheria toxin, that exhibits a potent cytotoxic effect on these CXCR4+ cancer cells that exhibits potent cytotoxic effects on CXCR4-overexpressing cancer cells through the activation of pyroptosis, an immunogenic type of cell death. Methods: Colorectal CXCR4-expressing tumor cells (CT26-CXCR4+) were implanted subcutaneously into immunocompetent mice to study the effects of T22-DITOX-H6 treatment on tumor growth, cell death and innate immune cell recruitment to the tumor. Results: Here, we demonstrated that the T22-DITOX-H6 nanoparticle selectively activated pyroptosis, an immunogenic cell death that differs from apoptosis, leading to cell death in CXCR4-expressing cells, without affecting the viability of CXCR4-lacking cells. In addition, the nanoparticle administered to tumor-bearing mice induced a local antitumor effect due to the selective activation of pyroptosis in CXCR4+ targeted cancer cells. Biochemical analysis of plasma and histological analysis of non-tumor tissues revealed no differences between the groups. Remarkably, pyroptosis activation stimulates eosinophil infiltration into the tumor microenvironment, an effect recently reported to have an anti-tumorigenic function. Conclusion: These results highlight the dual role of CXCR4-targeted cytotoxic nanoparticle in eliminating cancer cells and boosting the self-immune response without compromising healthy organs.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Climatic niche conservatism in non-native plants is largely dependent on their climatic niche breadth in the native range

  • Riera, Marc|||0000-0002-3860-6046
  • Vilà, Montserrat|||0000-0003-3171-8261
  • Melero, Yolanda|||0000-0002-4337-1448
  • Sáez, Llorenç|||0000-0003-4551-2432
  • Pino i Vilalta, Joan|||0000-0003-0939-7502
Confidence in predictions of non-native species' spread relies on the niche conservatism hypothesis, which poses that climatic niches are preserved over time and space. Because plants introduced through the same introduction pathway (gardening, unintentional) tend to share some features of the introduction process and biological attributes, the extent of niche conservatism might be influenced by how and when species of particular attributes have been introduced. We compared the realized climatic niches between the native (global) and invaded ranges (mainland Spain), through ordination and kernel smoothers. We calculated niche conservatism metrics (i.e. overlap, unfilling, stability, expansion and pioneering), for a set of 158 plant species. Niche conservatism metrics were then related to a plant's introduction pathway, minimum residence time, growth form and native climatic niche breadth. On average, niche stability accounted for 75% of niche occupancy, while around 61% of species showed some degree of niche shift, which were mostly of small magnitude. The climatic niche was most conserved for annual and perennial herbs, plants introduced a long time ago, and those with broad climatic niches in their native range. Introduction pathways had a non-significant effect. Niche conservatism metrics were neither explained by interactions of minimum residence time with introduction pathways nor with growth form. Native climatic niche breadth was the most important correlate of niche conservatism metrics. Synthesis. Non-native plants largely occupy similar climatic conditions in their invaded and native range, a pattern that co-occurred with frequent and mostly small niche shifts. These results largely support the niche conservatism hypothesis. This boosts confidence in predictive models of non-native plants' spread. This study highlights that niche conservatism is better explained by a plant's ability to cope with broad climatic conditions, rather than by its introduction history or growth form.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A single recall vaccination lapse in sows triggers PRRSV resurgence and boosts viral genetic diversity

  • Clilverd, Hepzibar|||0000-0002-4309-7506
  • Martin-Valls, Gerard|||0000-0003-3302-0692
  • Li, Yanli
  • Domingo Carreño, Ivan|||0009-0001-9927-9069
  • Martín Castillo, Margarita|||0000-0003-4370-6700
  • Cortey, Martí|||0000-0003-1126-3423
  • Mateu de Antonio, Enrique María|||0000-0003-2715-6032
Porcine reproductive and respiratory syndrome virus (PRRSV) persists on certain farms despite vaccination and control efforts, with genetic diversity suspected as a contributing factor. This study examined the evolution and persistence dynamics of PRRSV-1 on a farrow-to-fattening farm with 1,700 sows vaccinated quarterly, focusing on a summer vaccination lapse. Over eight months, three farrowing batches were monitored from birth to nine weeks of age using virological (RT-qPCR, whole-genome, and ORF5 sequencing) and serological (ELISA and neutralizing antibody) analyses. An incident related to elevated temperatures during the summer involving unproper vaccine handling occurred during the last blanket vaccination, before sampling the third batch. Viral circulation was primarily confined to the nurseries, with a notable surge of incidence and mortality in this last batch, linked to lower maternal antibody levels likely due to vaccination failure. Phylogenetic analyses showed the persistence of the same viral strain throughout the study, with increased genetic diversity in Batch 3 driven by selection and recombination. Ultimately, reestablishing the vaccination program led to a PRRSV-positive-stable with vaccination status. Overall, a single vaccination lapse caused increased PRRSV-1 incidence and genetic diversity in weaners, linked to declining maternal antibody levels, underscoring the importance of strict vaccination adherence. The online version contains supplementary material available at 10.1186/s40813-025-00433-w.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Male meiosis at the helm, shaping genomes and sex chromosomes in emerging vertebrate models

  • Marin Gual, Laia|||0000-0003-1480-0976
  • Waters, Paul D.|||0000-0002-4689-8747
  • Ruiz-Herrera, Aurora|||0000-0003-3868-6151
The generation of haploid gametes is a hallmark of sexual reproduction achieved through a complex, albeit tightly regulated, reductional cell division known as meiosis. While the molecular underpinnings of meiosis have been extensively characterized in eutherian mammalian models, key aspects-particularly those governing chromosome synapsis and recombination-remain poorly understood in non-eutherian mammals and non-model vertebrates. This knowledge gap is especially relevant for understanding genome evolution, with a focus on sex chromosomes. Comparative studies across diverse vertebrate lineages are therefore essential to uncover conserved and lineage-specific features of meiotic regulation. In this review, we explore the evolutionary dynamics of meiosis in vertebrates, emphasizing how the meiotic program influences genome architecture and the evolution of heteromorphic sex chromosomes, especially the Y chromosome. As research in non-model species gains momentum, dissecting the diversity of meiotic mechanisms across taxa emerges as a key to understanding genome plasticity and evolutionary innovation.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Meiotic cohesin RAD21L shapes 3D genome structure and transcription in the male germline

  • Marin Gual, Laia|||0000-0003-1480-0976
  • Vara González, Covadonga|||0000-0002-8264-9262
  • Sainz-Urruela, Raquel
  • Cuartero, Yasmina
  • Álvarez-González, Lucía|||0000-0001-8154-8614
  • Felipe-Medina, Natalia
  • García, Francisca|||0000-0002-2141-7628
  • Llano, Elena
  • Marti-Renom, Marc A.|||0000-0002-0151-4279
  • Pendás, Alberto M.
  • Ruiz-Herrera, Aurora|||0000-0003-3868-6151
The distinctive three-dimensional (3D) chromatin architecture adopted by chromosomes during meiosis is essential for fertility, yet the functional implications of the fine-scale spatial organization remain poorly understood. Here, we investigate the impact of RAD21L deletion, a meiosis-specific cohesin subunit, on the 3D genome architecture and gene expression in the male germ line. Using fluorescence-activated cell sorting, high-throughput chromosome conformation capture, and single-cell RNA sequencing, we demonstrate that RAD21L deficiency impairs meiotic chromatin organization and inter/intrachromosomal interactions. This conspicuous 3D genome reorganization also disrupts bouquet formation, resulting in increased telomeric interactions between heterologous chromosomes in primary spermatocytes. Genome reorganization was accompanied by detectable transcriptional dysregulation in spermatogonia and primary spermatocytes, mainly affecting sex chromosomes. Collectively, our findings establish the cohesin RAD21L as a germline-specific critical regulator of genome-wide 3D genome reorganization during spermatogenesis and a modulator of the male germline transcriptional landscape.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

KDEL-mediated modulation of intracellular trafficking in cell-targeted protein drugs

  • Voltà-Durán, Eric|||0000-0003-0017-8274
  • Alba Castellón, Lorena|||0000-0003-3449-7820
  • Arena, Lourdes Ailen|||0009-0006-1863-3895
  • Sánchez, Julieta M.|||0000-0001-6676-5776
  • Casanova Rigat, Isolda|||0000-0002-1196-4724
  • Mangues, Ramon|||0000-0003-2661-9525
  • Villaverde, Antonio|||0000-0002-2615-4521
  • Vázquez, Esther|||0000-0003-1052-0424
  • Unzueta Elorza, Ugutz|||0000-0001-5119-2266
The biological activity of therapeutic proteins, upon intracellular delivery, is dramatically minimized by lysosomal proteolytic digestion. This is a limitation when developing cell-targeted pharmaceuticals that penetrate target cells via receptor recognition and endosomal engulfment. Since proteins benefit from functional and conformational versatility, editable by genetic engineering, endosomolytic protein domains are often fused to the functional polypeptide to promote their cytosolic delivery, aiming at minimizing proteolysis in mature lysosomes. This straightforward strategy has, however, rendered irregular results, linked to the fusogenic nature of most of the tested domains. Alternatively, proteolysis of protein drugs might be controlled by bypassing the lysosomal route, forcing an unconventional traffic of the uptaken protein material to be secreted from the endoplasmic reticulum (ER). This possibility, used in nature by several plant and microbial proteins, has been evaluated here by functionalizing a protein-only antitumoral drug, based on a cell-targeted diphtheria toxin, with a C-terminal KDEL motif. Thus, if KDEL were able to reprogram the intracellular trafficking, KDEL-tagged cell delivered proteins would be expected to avoid the lysosomal degradation, resulting in enhanced stability and activity. The obtained results validate this hypothesis and point out KDEL as a promising functional agent in cell-targeted protein drugs.
Dipòsit Digital de Documents de la UAB
Publication Artículo de revisión (ReviewArticle)

Nanotoxin induces in situ pyroptosis to sensitize αPD1 to ablate metastases in microsattellite stable colorectal cancer

  • Carrasco-Díaz, Luis Miguel|||0000-0003-0567-2802
  • Otero-Mateo, Marc
  • Álamo, Patricia|||0000-0003-0510-5701
  • Gallardo, Alberto|||0000-0002-2514-2027
  • Virgili Manrique, Anna Cristina|||0000-0001-9733-6034
  • Paez, David|||0000-0002-5596-6588
  • Voltà-Durán, Eric|||0000-0003-0017-8274
  • Villaverde, Antonio|||0000-0002-2615-4521
  • Vázquez, Esther|||0000-0003-1052-0424
  • Unzueta Elorza, Ugutz|||0000-0001-5119-2266
  • Casanova Rigat, Isolda|||0000-0002-1196-4724
  • Alba Castellón, Lorena|||0000-0003-3449-7820
  • Mangues, Ramon|||0000-0003-2661-9525
Nanomedicine has not generated anticancer immunotherapies because of insufficient targeted specificity, lack of immunity, and associated toxicity. We developed a T22-DITOX-H6 (TDX) nanotoxin to selectively release the diphtheria toxin in the cancer cells in immunosuppressed CXCR4-overexpressing (CXCR4 +) colorectal (CRC) models, inducing pyroptosis and anticancer effect. Microsatellite stable (MSS) CRC patients do not respond to current immunotherapy. Since pyroptosis is highly immunogenic, we treated with TDX immunocompetent CXCR4 + CT26 MSS metastatic CRC models to selectively deliver the toxin to induce in situ pyroptosis mediated by the activation of NLRP3, Caspase-1 GSDMD and IL-1β. In contrast to immunosuppressed, in situ pyroptosis by TDX in immunocompetent models trigger CD8 + T cell recruitment, activation and killing of cancer cells in tissues, mimicking the pyroptosis that the host induces to kill diphtheria-infected cells. The combination of TDX and αPD1 further increases CD8 + recruitment and perforin secretion, achieving a tissue-specific antimetastatic activity in mesentery, peritoneum, and lung, and especially in liver metastases, without systemic toxicity. This is the first time that a novel nanomedicine achieves local T cell activation and antimetastatic effect mediated by pyroptosis and immunogenic cell death, whereas the combination with αPD1 enhances T cell activation, reaching a synergistic response in MSS CRC models.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

Insider information and its relation with the arbitrage condition and the utility maximization problem

  • D'Auria, Bernardo
  • Salmerón Garrido, José Antonio
Correction: Mathematical Biosciences and Engineering, 20(5), 8305-8307. https://doi.org/10.3934/mbe.2023362 We prove that Theorem 4.16 in [1] is false by constructing a strategy that generates (FLVR) H(G). However, we success to prove that the no arbitrage property still holds when the agent only plays with strategies belonging to the admissible set called buy-and-hold., Within the well-known framework of financial portfolio optimization, we analyze the existing relationships between the condition of arbitrage and the utility maximization in presence of insider information. We assume that, since the initial time, the information flow is altered by adding the knowledge of an additional random variable including future information. In this context we study the utility maximization problem under the logarithmic and the Constant Relative Risk Aversion (CRRA) utilities, with and without the restriction of no temporary-bankruptcy.In particular, we show that the value of the insider information may be bounded while the arbitrage condition holds and we prove that the insider information does not always imply arbitrage for the insider by providing an explicit example., This research was partially supported by the Spanish Ministry of Economy and Competitiveness grants MTM2017-85618-P (via FEDER funds), MTM2015-72907-EXP and FPU18/01101. We thank the referees for the insightful comments that helped to improve the presentation of this work.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

Predicting MHC I restricted T cell epitopes in mice with NAP-CNB, a novel online tool

  • Wert Carvajal, Carlos
  • Sánchez García, Rubén
  • Macías, José R.
  • Sanz Pamplona, Rebeca
  • Méndez Pérez, Almudena
  • Alemany, Ramon
  • Veiga, Esteban
  • Sánchez Sorzano, Carlos Óscar
  • Muñoz Barrutia, María Arrate
Lack of a dedicated integrated pipeline for neoantigen discovery in mice hinders cancer immunotherapy research. Novel sequential approaches through recurrent neural networks can improve the accuracy of T-cell epitope binding affinity predictions in mice, and a simplified variant selection process can reduce operational requirements. We have developed a web server tool (NAPCNB) for a full and automatic pipeline based on recurrent neural networks, to predict putative neoantigens from tumoral RNA sequencing reads. The developed software can estimate H-2 peptide ligands, with an AUC comparable or superior to state-of-the-art methods, directly from tumor samples. As a proof-of-concept, we used the B16 melanoma model to test the system’s predictive capabilities, and we report its putative neoantigens. NAP-CNB web server is freely available at http:// bioco mp. cnb. csic. es/ Neoan tigen sApp/ with scripts and datasets accessible through the download section., This work was funded by the Spanish Ministry of Economy, Industry and Competitiveness (TEC2016-28052-R, RTC2017-6600-1, SAF2017-84091-R, BFERO2020.04), the Spanish Ministry of Science and Innovation (FPU18/03199, PID2019-109820RB-I00), the “la Caixa” Foundation (LCF/BQ/EU19/11710071), FERO foundation and Centro Superior de Investigaciones Científicas (JAEINT18/EX/0636).
Repositorio Digital de la UPF
Publication Artículo científico (JournalArticle)

“The Unbearable green demon”: a critical analysis of press representation around the extermination of monk parakeets in Madrid

  • Fernández, Laura
  • Moreno, Jose A.
  • Suárez Domínguez, Alejandro
We examine the press representation of monk parakeets (Myiopsitta monachus) and their population management in Madrid city. To do this, we analyze mentions of this species in six Spanish newspapers for the case of Madrid. We apply a mixed methodology composed of framing, text analysis, and sentiment analysis. This multi-method approach allows us to further examine the framing and word choice of the newspapers, concluding that the press representation of monk parakeets has been biased and non-ethically led. We discuss this outcome by proposing a media representation guided by non-speciesist ethical framings and avoiding the objectification of nonhuman animals., This research was funded by Spanish Ministry of Science, Innovation and Universities, grant number FPU18/04207 and the Generalitat de Catalunya (Department of Universities and Research) and the European Social Fund, grant number 2018FI_B_00094.
Repositorio Digital de la UPF
Publication Artículo científico (JournalArticle)

Representación en la prensa española del papel de la agricultura animal en la crisis climática: falta de visibilidad y carnismo, Representation in the Spanish press of the role of animal agriculture in the climate crisis: between lack of attention and carnism

  • Moreno, Jose A.
  • Almiron, Núria, 1967-
La agricultura animal es una actividad con un gran impacto medioambiental, incluida la emisión de gases de efecto invernadero a la atmósfera, y que implica un grave dilema ético por la explotación de decenas de miles de millones de animales no humanos. Los medios de comunicación son una pieza clave para impulsar la acción climática. Es responsabilidad de los medios informar sobre las causas de la crisis climática y cómo enfrentarla. Esta investigación analiza la representación que hace la prensa española entre 2013 y 2019 del impacto climático de la agricultura animal. Para ello se ha utilizado una metodología cuantitativa basada en la teoría del framing, con encuadres construidos a partir de investigaciones anteriores. Los resultados muestran que la prensa española ha infrarrepresentado el papel de la agricultura animal en el cambio climático, no otorgándole suficiente visibilidad, que buena parte de las soluciones que los periódicos aportan no se ajusta al contexto de emergencia climática y que estas presentan con más frecuencia rasgos carnistas que encuadres en defensa de los animales no humanos, todo lo cual supone un freno a la acción ético-climática., The animal agriculture industry has extensive environmental impacts, releasing greenhouse gas emissions while also constituting a serious ethical dilemma due to the exploitation of billions of nonhuman animals. In this respect, media are a key piece for climatic action. It is a responsibility of media to report on the causes of the climate crisis and on its solutions. This research analyses the Spanish press coverage of the climatic impacts caused by the animal agriculture during the period of 2013-2019. To do so, a quantitative methodology based on framing theory has been applied, including frames developed through the examination of previous research. The results of this study show that the Spanish press has underrepresented the role that animal agriculture plays in climate change – not allocating enough attention to it –, that many of the proposed solutions do not correspond with the current context of climatic urgency, and that they present carnist traits more frequently than frames in defence of nonhuman animals. All this involves hindering future ethical and climatic action., Esta investigación se origina en el proyecto final del Máster Universitario en International Studies on Media, Power and Difference (Universitat Pompeu Fabra) y ha recibido financiación de la Fundación Franz Weber para el fomento de los Estudios Críticos sobre Animales y Medios de Comunicación, así como del programa de Formación del Profesorado Universitario del Ministerio de Ciencia, Innovación y Universidades (FPU18/04207)
Repositorio Digital de la UPF
Publication Artículo científico (JournalArticle)

The role of the press in reproducing the climate action contrarian framings of European think tanks

  • Moreno Cabezudo, Jose Antonio
Data de publicació electrònica: 25-11-2024, This article lies in the field of research on communication and obstructionism towards climate action. The research addresses the role of the press in reproducing framings hostile to climate action when quoting some European think tanks the literature has identified as disseminators of climate obstructionist messages. The methodology is based on content and framing analysis, covering all European newspapers that have mentioned the five selected think tanks. The analysis comprises the study of 1516 texts extracted from 203 European newspapers listed on the Factiva platform. The results show that most of the press coverage about these organizations reproduced their frames against climate action, although this reproductive coverage decreased over time. Among these frames, those with political content predominated over those with climate science content. In particular, frames attacking the climate movement and questioning policies for being harmful or ineffective overshadowed scientific questioning. The research also includes a gender component in the analysis of the authorship of the texts, which shows that texts by male authors were slightly more likely to reproduce climate obstructionism than those by female authors. Ultimately, this study contributes to the discussion on the role of journalism in amplifying climate action contrarian discourse., This work was funded by the Spanish State Research Agency (Agencia Estatal de Investigación, AEI) and the European Regional Development Fund (ERDF) under Grant CSO2016-78421-R; and by the Spanish Ministry of Universities, under Grant FPU18/04207.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Shear behaviour of castellated dry joints in precast segmental beams made of special concretes. Influence of compression forces, with and without eccentricity, Comportamiento resistente a cortante de juntas secas conjugadas entre vigas segmentadas prefabricadas con hormigones especiales. Influencia de los esfuerzos de compression, con o sin excentricidad

  • Traver Abella, Celia
[ES] La construcción de puentes mediante elementos segmentados prefabricados de hormigón se ha consolidado como una alternativa constructiva eficiente y versátil, debido principalmente a la notable reducción de los plazos de ejecución y a la menor incidencia de las condiciones ambientales durante el proceso constructivo. Las juntas entre segmentos generan regiones de discontinuidad que deben ser capaces de transmitir esfuerzos de compresión y cortante para asegurar la rigidez, la capacidad y la estabilidad de la estructura. En la actualidad, los puentes segmentados prefabricados de hormigón con pretensado exterior y juntas secas conjugadas constituyen la tipología más empleada. Las juntas secas conjugadas han sido objeto de numerosos ensayos experimentales. Sin embargo, la literatura científica se centra principalmente en el estudio de juntas sometidas a cortante directo y fabricadas con hormigón convencional. La industria de la prefabricación utiliza actualmente otros materiales, como el hormigón autocompactante, por la ventaja de su trabajabilidad; el hormigón de alta resistencia; y la incorporación de fibras de acero. Asimismo, las juntas entre segmentos están sometidas en servicio a esfuerzos combinados de axil, flexión y cortante, una situación que ha sido estudiada de forma muy limitada. Como consecuencia, las formulaciones de diseño existentes no contemplan adecuadamente ni el empleo de nuevos materiales ni la influencia de estados tensionales asociados a esfuerzos combinados. La presente tesis doctoral tiene como objetivo analizar el comportamiento y la resistencia de juntas secas conjugadas sometidas a esfuerzos combinados de axil, flexión y cortante, fabricadas con diferentes tipos de hormigón. Para ello, se ha diseñado un ensayo experimental capaz de reproducir estos estados de carga en especímenes tipo push-off, y se ha desarrollado un amplio programa experimental compuesto por especímenes push-off monolíticos, de junta plana y con llaves conjugadas de cortante. Los especímenes se fabricaron empleando hormigón autocompactante de resistencia convencional y de alta resistencia, con y sin incorporación de fibras de acero. En total, se ensayaron 98 especímenes, sometidos a cortante directo y a esfuerzos combinados. Para cada uno de los ensayos, se analizan el patrón de fisuración, el comportamiento carga-desplazamiento, el modo de fallo y las cargas de fisuración, última y residual. A partir de los resultados obtenidos, se evalúa la bondad de las formulaciones existentes y se analiza la influencia de los parámetros estudiados. Asimismo, se propone una nueva formulación empírica para estimar la resistencia a cortante de las juntas secas conjugadas bajo diferentes condiciones de carga y de materiales. Los resultados de esta investigación contribuyen a ampliar el conocimiento sobre el comportamiento de las juntas secas conjugadas en puentes segmentados prefabricados, aportando una extensa base de datos experimental y una evaluación crítica de los parámetros de diseño más relevantes. Además, establecen fundamentos sólidos para el desarrollo de futuras formulaciones de diseño que contemplan tanto el empleo de materiales avanzados como la acción de esfuerzos combinados., [EN] The construction of precast concrete segmental bridges (PCSBs) has become a versatile and efficient alternative, mainly due to significant reductions in construction time and the mitigation of environmental impacts during construction. Segmental joints constitute regions of structural discontinuity that must be capable of transmitting compressive and shear forces to ensure the stiffness, load-carrying capacity, and stability of the structure. Currently, externally prestressed PCSBs with castellated dry joints represent the most widely used bridge typology. Castellated dry joints have been studied in numerous experimental investigations. However, the existing scientific literature has primarily focused on joints subjected to direct shear and fabricated with conventional concrete. In contrast, the precast concrete industry increasingly employs alternative materials, such as self-compacting concrete due to its superior workability; high-strength concrete; and steel fibre-reinforced concrete. Furthermore, segmental joints are subjected in service to combined axial, bending, and shear forces, a loading condition that has received only limited attention in the literature. Consequently, existing design formulations do not adequately account for either the use of advanced concrete materials or the influence of stress states associated with combined loading conditions. The main objective of this doctoral thesis is to investigate the behaviour and shear capacity of castellated dry joints subjected to combined axial, bending, and shear forces and fabricated with different concrete materials. To this end, an experimental setup capable of reproducing these loading conditions in push-off specimens was designed, and an extensive experimental programme was carried out. The programme included monolithic, flat, and castellated dry joints in push-off specimens manufactured using self-compacting concrete of both normal and high strength, with and without steel fibres. A total of 98 specimens were tested under direct shear and combined loading conditions. For each test, the cracking pattern, load-displacement response, failure mode, and cracking, ultimate, and residual loads were analysed. Based on the experimental results, the validity of existing design formulations is assessed, and the influence of the investigated parameters is examined. In addition, a new empirical formulation is proposed to predict the shear capacity of castellated dry joints under various loading conditions and material configurations. The findings of this research contribute to expanding the current knowledge of the behaviour of castellated dry joints in PCSBs by providing an extensive experimental database and a comprehensive assessment of the most relevant design parameters. Furthermore, the results establish a solid foundation for the development of future design formulations that account for both advanced concrete materials and combined loading conditions., [CA] La construcció de ponts mitjançant elements segmentats prefabricats de formigó s'ha consolidat com una alternativa constructiva eficient i versàtil, degut principalment a la notable reducció dels terminis d'execució i a la menor incidència de les condicions ambientals durant el procés constructiu. Les juntes entre segments generen regions de discontinuïtat que han de ser capaces de transmetre esforços de compressió i tallant per a assegurar la rigidesa, la capacitat i l'estabilitat de l'estructura. En l'actualitat, els ponts segmentats prefabricats de formigó amb pretesat exterior i juntes seques conjugades constituïxen la tipologia més empleada. Les juntes seques conjugades han sigut objecte de nombrosos assajos experimentals. No obstant això, la literatura científica se centra principalment en l'estudi de juntes sotmeses a tallant directe i fabricades amb formigó convencional. La indústria de la prefabricació utilitza actualment altres materials, com el formigó autocompactant, per l'avantatge de la seua traballabilitat; el formigó d'alta resistència; i la incorporació de fibres d'acer. Així mateix, les juntes entre segments estan sotmeses en servici a esforços combinats d'axial, flexió i tallant, una situació que ha sigut estudiada de forma molt limitada. Com a conseqüència, les formulacions de disseny existents no contemplen adequadament ni l'ús de nous materials ni la influència d'estats tensionals associats a esforços combinats. La present tesi doctoral té com a objectiu analitzar el comportament i la resistència de juntes seques conjugades sotmeses a esforços combinats d'axial, flexió i tallant, fabricades amb diferents tipus de formigó. Per a això, s'ha dissenyat un assaig experimental capaç de reproduir estos estats de càrrega en espècimens tipus push-off, i s'ha desenrotllat un ampli programa experimental compost per espècimens push-off monolítics, de junta plana i amb claus conjugades de tallant. Els espècimens es van fabricar emprant formigó autocompactant de resistència convencional i d'alta resistència, amb i sense incorporació de fibres d'acer. En total, es van assajar 98 espècimens, sotmesos a tallant directe i a esforços combinats. Per a cada un dels assajos, s'analitzen el patró de fissuració, el comportament carrega-desplaçament, el mode de fallada i les càrregues de fissuració, última i residual. A partir dels resultats obtinguts, s'avalua la bondat de les formulacions existents i s'analitza la influència dels paràmetres estudiats. Així mateix, es proposa una nova formulació empírica per a estimar la resistència a tallant de les juntes seques conjugades sota diferents condicions de càrrega i de materials. Els resultats d'esta investigació contribuïxen a ampliar el coneixement sobre el comportament de les juntes seques conjugades en ponts segmentats prefabricats, aportant una extensa base de dades experimental i una avaluació crítica dels paràmetres de disseny més rellevants. A més, establixen fonaments sòlids per al desenrotllament de futures formulacions de disseny que contemplen tant l'ús de materials avançats com l'acció d'esforços combinats., This doctoral thesis would not have been possible without the financial support of the Ministerio de Ciencia e Innovación (MCIN) through Grants PID2021–126397OBI00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, RTI2018–099091-B-C21-AR funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, and TED2021–129358B-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGeneration EU/PRTR. I am also thankful for the support of the Spanish Ministry of Universities through Grant FPU18/03310. This research was undertaken at the Concrete Science and Technology University Institute (ICITECH) of the Universitat Politècnica de València (UPV, Spain). Funding for open access charge: CRUE–Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A contemporary approach to the graphic representation of the urban experience, Una aproximación contemporánea a la representación gráfica de la experiencia urbana

  • Vicente Gilabert, Cristina
  • López Sánchez, Marina
  • Linares Gómez del Pulgar, Mercedes
[EN] In the complex field of urban phenomenon analysis and representation, this text addresses the evolution of works specifically dedicated to investigating the relationships established between individuals and the city. It focuses its attention on one of the less studied aspects: the cartographic representation of subjective, emotional, and perceptual aspects related to the experience of navigating and inhabiting an urban space. The city cannot be considered as a neutral or objective space; on the contrary, there will always be an imaginary construct that shapes and accompanies it. This imaginary construct, which determines our way of perceiving, being, and moving within the city, is fundamental for a comprehensive understanding of urban processes and dynamics. Approaching this dialectical relationship between the physical and subjective dimensions of the city, which is intangible in itself, through analysis and graphic representation is now possible thanks to theoretical and, above all, technological advancements. The objective of this text is to contextualize this process by presenting two frames of reference: one conceptual, linked to the evolution of the term landscape, and another methodological, focused on presenting the technical advancements that have been decisive in the evolution of this type of representation. We take a journey through cartographic experiences initiated in the 1960s and arrive at some of the most innovative research lines in this field, such as Biomapping, real-time cartographies, or intelligent cartographies. The aim of the article is to reinforce and emphasize the utility of graphic expression as a tool for urban and territorial decision-making, highlighting its capacity to represent even the most sensitive and complex data. Through a panoramic view of the advancements achieved in recent decades regarding these types of cartographies, it illustrates the interesting convergence that can be delineated today between the traditionally connected areas of graphic expression in Architecture and Urbanism and the new scenarios of data management and analysis., [ES] En el complejo ámbito del análisis y la representación del fenómeno urbano, este texto aborda la evolución de aquellos trabajos que se ocupan específicamente de indagar en las relaciones que se establecen entre los individuos y la ciudad, centrando su atención en una de las líneas menos estudiadas: la representación cartográfica de los aspectos subjetivos, emocionales y perceptivos, ligados a la experiencia de recorrer y habitar un espacio urbano. La ciudad no puede considerarse como un espacio inocuo u objetivo, sino que, al contrario, siempre habrá un imaginario que la construye y acompaña. Este imaginario, que determina nuestra forma de percibirla, de estar y de movernos por ella, es fundamental para la comprensión integral de los procesos y las dinámicas urbanas. Y aproximarnos desde el análisis y la representación gráfica a esa relación dialéctica entre dimensión física y subjetiva de la ciudad, intangible en sí misma, es hoy posible gracias a los progresos teóricos y, sobre todo, tecnológicos. El objetivo de este texto es contextualizar este proceso presentando dos marcos de referencia: uno conceptual, ligado a la evolución del término de paisaje, y otro metodológico, centrado en presentar los avances técnicos que han resultado determinantes en la evolución de este tipo de representación. Se realiza un recorrido a través de experiencias cartográficas iniciadas en los años 60 hasta llegar a algunas de las líneas de investigación más innovadoras en este ámbito, como son el Biomapping, las cartografías en tiempo real o las cartografías inteligentes. El objetivo del artículo es reforzar y reivindicar la utilidad de la expresión gráfica como instrumento al servicio de la toma de decisiones urbanas y territoriales, poniendo de manifiesto su capacidad para la representación incluso de los datos más sensibles y complejos. A través de una visiónpanorámica de los avances logrados de las últimas décadas respecto a este tipo de cartografías, se ilustra el interesante espacio de convergencia que es posible delinear hoy entre los ámbitos tradicionalmente ligados con la expresión gráfica en Arquitectura y Urbanismo, y los nuevos escenarios de gestión y análisis de datos., Esta publicación es parte del proyecto de I+D+i PID2020-119437RB-I00, financiada por MCIN/AEI/10.13039/501100011033. La primera autora, por la ayuda FPU18/04853 financiada por MCIN/AEI/10.13039/501100011033 y por FSE Invierte en tu futuro.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Analysis of a novel concept of 2-stroke rod-less opposed pistons engine (2S-ROPE): Testing, modelling, and forward potential

  • Serrano, J.R.|||0000-0003-0692-3917
  • Arnau Martínez, Francisco José|||0000-0003-2902-0630
  • Bares-Moreno, Pau|||0000-0001-9672-0819
  • Gómez-Vilanova, Alejandro|||0000-0002-6627-7075
  • Garrido-Requena, J.
  • Luna-Blanca, M. J.
  • Contreras-Anguita, F. J.
[EN] As pollutants and fuel consumption requirements become more constraining, new internal combustion engines generation arise to fulfill future automobile market regulations. In these context spark ignition (SI) engines working under hybridized structures are expected to represent one of the most viable and feasible technical approaches. In parallel to the already implemented 4-stroke turbocharged engines, new engine concepts are being conceived from their birth to meet nowadays standards. This work shows a new engine concept assessed to fit series hybrid configurations from the earliest design stages, and to fulfil requirements of the named "zero-emissions" urban areas. In this research work, a new opposed piston 2-stroke engine architecture based on rodless innovative kinematics is described. The potential of this engine is based on its compactness, absence of vibrations and simplicity, going in hand with very competitive figures in terms of power density and fuel consumption. The engine unit has been designed, assembled, and tested to analyze several performance aspects, such as gas exchange and combustion. Taking advantage of the experimental campaign, a one-dimensional (1D) gas-dynamics engine model was developed and validated. Finally, the engine model was used for analyzing several potential upgrades and results have been discussed in detail. The target has always been to improve fuel consumption figures, below the best standards in market available internal combustion engines, while keeping engine concept simplicity and building costs., Alejandro Gomez Vilanova is partially supported through contract: Ayuda de Formacion de Profesorado Universitario (FPU18/04811). The authors also wish to thank Agencia IDEA (Agencia de Innovacion y Desarrollo de Andalucia) which depends on Consejeria de Economia, Conocimiento, Empresas y Universidad through PROGRAMA DE APOYO A LA I + D + i EMPRESARIAL (code 402C1700011) and subsidy in a non-competitive competition regime for companies for industrial development, improvement of competitiveness, digital transformation and job creation in Andalucia (401N1800210).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

LES of a pressurized sooting aero-engine model burner using a computationally efficient discrete sectional method coupled to tabulated

  • García-Oliver, José M|||0000-0002-2676-9681
  • Pastor Enguídanos, José Manuel|||0000-0003-4458-0353
  • Olmeda-Ramiro, Iván
  • Kalbhor, A.
  • Mira Martínez, Daniel
  • Van-Oijen, Jeroen
[EN] This work is focused on the modeling and analysis of soot formation and oxidation in the pressurized ethylene-based model burner investigated at DLR. This burner features a dual swirler configuration for the primary air supply and includes secondary dilution jets inside the combustion chamber, showing reacting flow characteristics representative of the RQL combustor technology. Large-eddy simulations (LES) of the DLR burner are conduced here to assess a coupling approach between flamelet generated manifold (FGM) chemistry and discrete sectional method (DSM) based soot model with clustering method. First, a validation of the numerical results is conducted for the gas velocity and temperature fields, and good agreement is obtained for both mean and fluctuating quantities. The Soot Volume Fraction (SVF) computed from LES shows a satisfactory agreement with the experimental data in both SVF distribution and magnitude. The analysis also includes a numerical investigation of the soot production and the Particle Size Distributions (PSD). Finally, the configuration without secondary air is evaluated and an accurate prediction of the SVF field is also obtained. In this case, the absence of dilution air strongly influences the central region of the combustion chamber, and soot distribution and PSD are mainly affected by transport and dilution, not oxidation. It is finally concluded the proposed modeling framework is capable of predicting the soot field and particle size distributions inside the combustor for both operating conditions., The research leading to these results has received funding from the European Union's Horizon 2020 Programme under the ESTiMatE project, grant agreement No. 821418, and the AHEAD PID2020-118387RB-C33 and SAFLOW TED2021-131618B-C21 and TED2021-131618B-C22 projects from the Ministerio de Ciencia e Innovacion, Spain. We acknowledge PRACE for awarding us access through the SootAero project to HAWK at GCS@HLRS, Germany. The authors thankfully acknowledge the computer resources at LaPalma and MareNos-trum, and the technical support provided by Instituto de Astrofisica de Canarias (IM-2021-2-0027) and Barcelona Supercomputing Center (IM-2021-3-0016) . I. Olmeda acknowledges the Ayuda de Formacion de Profesorado Universitario (FPU 18/03065) from the Subprograma de Estatal de Formacion del Ministerio de Ciencia, Innovacion y Universidades of Spain. DM acknowledges the grant Ayudas para contratos Ramon y Cajal (RYC) 2021: RYC2021-034654-I from Ministerio de Ciencia e Innovacion.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

From Simultaneous to Streaming Machine Translation by Leveraging Streaming History

  • Iranzo-Sánchez, Javier
  • Civera Saiz, Jorge|||0000-0002-0963-0143
  • Juan, Alfons|||0000-0002-9984-4072
[EN] Simultaneous Machine Translation is the task of incrementally translating an input sentence before it is fully available. Currently, simultaneous translation is carried out by translating each sentence independently of the previously translated text. More generally, Streaming MT can be understood as an extension of Simultaneous MT to the incremental translation of a continuous input text stream. In this work, a state-of-the-art simultaneous sentencelevel MT system is extended to the streaming setup by leveraging the streaming history. Extensive empirical results are reported on IWSLT Translation Tasks, showing that leveraging the streaming history leads to significant quality gains. In particular, the proposed system proves to compare favorably to the best performing systems., The research leading to these results has received funding from the European Union¿s Horizon 2020 research and innovation programme under grant agreements no. 761758 (X5Gon) and 952215 (TAILOR), and Erasmus+ Education programme under grant agreement no. 20-226-093604-SCH (EXPERT); the Government of Spain¿s grant RTI2018-094879-B-I00 (Multisub) funded by MCIN/AEI/10.13039/501100011033 & ¿ERDF A way of making Europe¿, and FPU scholarships FPU18/04135; and the Generalitat Valenciana¿s research project Classroom Activity Recognition (ref. PROMETEO/2019/111). The authors gratefully acknowledge the computer resources at Artemisa, funded by the European Union ERDF and Comunitat Valenciana as well as the technical support provided by the Instituto de Física Corpuscular, IFIC (CSIC-UV).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Airborne ultrasonic application on hot air-drying of pork liver. Intensification of moisture transport and impact on protein solubility

  • Sanchez-Torres, E.A.|||0000-0003-4121-2459
  • Benedito Fort, José Javier|||0000-0003-0163-4593
  • Bon Corbín, José|||0000-0002-0457-9705
  • Garcia-Perez, J.V.|||0000-0002-9993-4246
  • Abril-Gisbert, Blanca
  • Toldrà, M.
  • Parés, D.
[EN] Nowadays, there is increasing interest in developing strategies for the efficient and sustainable use of animal byproducts, such as pork liver. In order to stabilize the product, a prior dehydration stage may be required due to its high perishability. The water removal process of pork liver is energy costly and time consuming, which justifies its intensification using novel technologies. In this sense, the aim of this study was to assess the effect of the airborne application of power ultrasound on the hot air-drying of pork liver. For that purpose, drying experiments were carried out at 30, 40, 50, 60 and 70 ?C on pork liver cylinders at 2 m.s(-1) with (US) and without ultrasonic application (AIR). The drying process was modeled from the diffusion theory and, in the dried pork liver, the protein solubility was analyzed in order to determine the effect of drying on the protein quality. The ultrasound application increased the drying rate, shortening the drying time by up to 40% at 30 ?C. The effect of power ultrasound at high temperatures (60 and 70 ?C) was of lesser magnitude. Drying at 70 ?C involved a noticeable reduction in the protein solubility for dried liver, while the impact of ultrasound application on the solubility was not significant (p > 0.05)., The authors acknowledge the financial support from the "Ministerio de Economia y Competitividad (MINECO)" and "Instituto Nacional de Investigacion y Tecnologia Agraria y Alimentaria (INIA)" in Spain (Project RTA2017-00024-C04-03) . Eduardo A. Sanchez-Torres acknowledges the FPU PhD contract (FPU18/01439) granted by the Spanish Ministry of Science, Innovation and Universities. Funding for open access charge: Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Cache-Poll: Containing Pollution in Non-Inclusive Caches Through Cache Partitioning

  • Pons-Escat, Lucía|||0000-0002-4582-7744
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Pons Terol, Julio|||0000-0002-5654-6753
[EN] Current server processors have redistributed the cache hierarchy space over previous generations. The private L2 cache has been made larger and the shared last level caches (LLC) smaller but designed as non-inclusive to reduce the number of replicated blocks. As a result, the new organization shrinks the per-core cache area. Cache management in this organization becomes more critical than in inclusive caches due to two main reasons: there is less storage capacity per core both in the L3 and when considering the sum of L2 and L3 cache sizes, and there is higher L2-L3 traffic especially when running high cache-demanding applications. This paper focuses on minimizing L3 cache pollution to make a more efficient use of the limited space. Three main types of pollution are identified and measured: useless prefetches, bad speculated loads, and poor locality. This paper proposes Cache-Poll, a pollution-aware management policy that concentrates on limiting the cache space to polluting and L3 insensitive applications, allowing critical applications occupy more space. Unlike state-of-the-art work on non-inclusive caches, Cache-Poll is able to improve performance in an Intel Xeon Scalable processor even when running heavy cache-demanding workloads, consisting of 12-application workloads, as many applications as cores in the processor. Results show that Cache-Poll improves fairness and turnaround time by 44% and 24%, respectively, over the Linux OS, while even improving performance up to 3.5%., This work has been supported by the Spanish Ministerio de Universidades under the grant FPU18/01948 and by Spanish Ministerio de Universidades and European ERDF under grant RTI2018-098156-BC51.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Probabilistic risk assessment of historic timber flooring systems subjected to fire

  • Garcia-Castillo, Ester
  • Gernay, Thomas
  • Paya-Zaforteza, Ignacio
[EN] Structural fire analyses of historic buildings face significant uncertainties due to their age and the scarcity of specific fire safety guidelines in modern codes. Typical prescriptive approaches often result in interventions that compromise the aesthetic and cultural value of these structures. In contrast, probabilistic performance-based approaches address uncertainties and offer flexibility to achieve compliance with fire safety requirements while preserving built heritage. This study introduces a novel probabilistic methodology to assess the fire resistance of timber structures, demonstrated on historic timber jack arch flooring systems. Extensive numerical simulations were conducted to develop fire fragility functions and obtain reliability indices, incorporating variability in timber density, mechanical properties, strength reduction with temperature, and applied loads. Results indicate that many of the historic systems studied possess adequate fire safety. Applicable to any timber structure, this methodology allows case-specific analyses, promoting the rational conservation and design of heritage and contemporary timber systems., This article is part of the Project PID2021-128152NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe". The authors would also like to express their gratitude for the support provided to this research through the predoctoral grant FPU18/00726 funded by MICIU/AEI/10.13039/501100011033 and by "ESF Investing in your future".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A Study of the Flexural Behavior of Fiber-Reinforced Concretes Exposed to Moderate Temperatures

  • Caballero-Jorna, Marta
  • Roig-Flores, Marta
  • Serna Ros, Pedro|||0000-0001-8754-1165
[EN] The use of synthetic fibers in fiber-reinforced concretes (FRCs) is often avoided due to the mistrust of lower performance at changing temperatures. This work examines the effect of moderate temperatures on the flexural strengths of FRCs. Two types of polypropylene fibers were tested, and one steel fiber was employed as a reference. Three-point bending tests were carried out following an adapted methodology based on the standard EN 14651. This adapted procedure included an insulation system that allowed the assessment of FRC flexural behavior after being exposed for two months at temperatures of 5, 20, 35 and 50 °C. In addition, the interaction of temperature with a precracked state was also analyzed. To do this, several specimens were pre-cracked to 0.5 mm after 28days and conditioned in their respective temperature until testing. The findings suggest that this range of moderate temperatures did not degrade the behavior of FRCs to a great extent since the analysis of variances showed that temperature is not always a significant factor; however, it did have an influence on the pre-cracked specimens at 35 and 50 °C., This research was funded by Spanish Ministry of Science, Innovation and Universities, grant number FPU18/06145.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

LSTM-Based One-Pass Decoder for Low-Latency Streaming

  • Jorge-Cano, Javier|||0000-0002-9279-6768
  • Giménez Pastor, Adrián
  • Silvestre Cerdà, Joan Albert|||0000-0003-2291-8296
  • Civera Saiz, Jorge|||0000-0002-0963-0143
  • Sanchis Navarro, José Alberto|||0000-0002-2943-0990
  • Juan, Alfons|||0000-0002-9984-4072
  • Iranzo-Sánchez, Javier
[EN] Current state-of-the-art models based on Long-Short Term Memory (LSTM) networks have been extensively used in ASR to improve performance. However, using LSTMs under a streaming setup is not straightforward due to real-time constraints. In this paper we present a novel streaming decoder that includes a bidirectional LSTM acoustic model as well as an unidirectional LSTM language model to perform the decoding efficiently while keeping the performance comparable to that of an off-line setup. We perform a one-pass decoding using a sliding window scheme for a bidirectional LSTM acoustic model and an LSTM language model. This has been implemented and assessed under a pure streaming setup, and deployed into our production systems. We report WER and latency figures for the well-known LibriSpeech and TED-LIUM tasks, obtaining competitive WER results with low-latency responses., The research leading to these results has received funding from the European Union s Horizon 2020 research and innovation programme under grant agreement no. 761758 (X5gon);MCIU/AEI/FEDER,UE under the Multisub (RTI2018-094879-B-I00) research project and the Government of Spains FPU scholarship FPU18/04135.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A model of a rotating railway wheel for the prediction of sound radiation

  • Andrés-Ruiz, Víctor Tomás
  • Thompson, D.J.
  • Martínez Casas, José|||0000-0001-5706-4951
  • F. D. Denia|||0000-0003-4536-8610
[EN] The axial symmetry of a railway wheel is taken into account to expand its vibrational response around the circumferential direction using Fourier series. This allows the vibroacoustic problem of the wheel to be formulated in a two-dimensional frame, solving for the dynamic and acoustic variables analytically in the circumferential direction. By adopting an Eulerian approach, the inertial effects associated with the rotation of the wheelset are included in the model, assuming a constant angular speed of rotation. To represent a railway wheelset, the wheel is constrained at the inner edge of the hub and the contribution of the rigid body motion of the wheelset is superimposed on its response. The latter is evaluated analytically under the assumption of small rigid body displacements. The computational efficiency of the proposed methodology is found to be three orders of magnitude greater than a full three-dimensional methodology, without compromising the accuracy. The results are compared in terms of acoustic radiation with the commercial package Ansys, showing similar sound power levels in almost all the frequency range apart from some differences at low frequencies due to the use of an acoustic model based on radiation ratios., This paper is part of the project PID2020-112886RA-I00, grant FPU18/03999 and grant EST21/00213 funded by MCIN/AEI/10.13039/501100011033 as well as by "ESF Investing in your future". The authors also acknowledge Programa PROMETEO/2021/046 of Generalitat Valenciana, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Disentangling the role of interoceptive sensibility in alexithymia, emotion dysregulation, and depression in healthy individuals

  • Desdentado, Lorena
  • Miragall, Marta
  • Baños, Rosa María
  • Llorens Rodríguez, Roberto|||0000-0002-8677-8707
[EN] Interoception, a multifaceted concept defined as the perception of internal bodily signals, is crucially involved in mental health in general and in emotion regulation in particular, being interoceptive sensibility (IS) one of the most studied interoceptive processes. The main objective of this study was to explore the relationships between IS and emotion regulation processes, analyzing the role of the eight IS dimensions assessed by the Multidimensional Assessment of Interoceptive Awareness-2 (MAIA-2) in alexithymia, emotion dysregulation, and depression. Additionally, this study also aimed to validate the MAIA-2 in a Spanish sample. To do so, 391 healthy adults, native Peninsular Spanish speakers (61.0% women, M-age = 29.00, SDage = 11.40), completed the MAIA-2 and other self-reported questionnaires to measure alexithymia, emotion dysregulation, and depressive symptoms. Results showed that lower scores on the IS dimensions that involve an accepting attitude toward the bodily signals (e.g., not-worrying) were related to alexithymia and emotion dysregulation, which, in turn, predicted depression. Moreover, the eight-factor structure of the MAIA-2 was confirmed with acceptable fit indices. This study highlights the multidimensional nature of the IS and the relevance of IS dimensions that involve a positive appraisal of the body in regulating emotions., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This work was supported by Excellence Research Program PROMETEO (PROMETEO/2018/110, Conselleria d'Educacio, Investigacio, Cultura I Esport, Generalitat Valenciana). LD is supported by a grant FPU18/01690 funded by Ministerio de Ciencia e Innovacion/Agencia Estatal de Investigacion/10.13039/501100011033 and by "European Social Fund Investing in your future". The funding sources were not involved in the study design, in the collection, analysis and interpretation of data, in the writing of the report, or in the decision to submit the article for publication.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Probabilistic characterisation of the density, bending strength, and stiffness of timber structural elements from historic buildings

  • Garcia-Castillo, Ester
  • Abián-Pérez, Miguel Angel
  • Paya-Zaforteza, Ignacio
[EN] This paper presents probabilistic models for the density, modulus of rupture, and modulus of elasticity of historic softwood structural elements based on non-destructive testing data. Several probability density functions were fitted to experimental results obtained from three species of the genus Pinus ¿Pinus sylvestris, Pinus nigra, and U.S. southern yellow pine¿ and compared with the probabilistic models recommended by the Joint Committee on Structural Safety (JCSS) for contemporary timber. The results reveal significant differences between the proposed and JCSS models, highlighting the need to account for both species and age (historic versus contemporary) when statistically characterising timber properties. The study confirms that well-preserved historic timber can retain mechanical properties comparable to those of modern wood. The proposed species-specific probability density functions provide a more accurate basis for the probabilistic analysis and reliability assessment of historic timber structures, supporting their preservation and the broader goals of cultural heritage conservation and sustainable construction., This article is part of the Project PID2021 128152NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF/EU. The authors would also like to thank the Spanish Ministry of Science, Innovation and Universities for supporting this research through the PhD grant FPU18/00726 awarded to the first author.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Dynamic Allocation of Processor Cores to Graph Applications on Commodity Servers

  • Pons-Escat, Lucía|||0000-0002-4582-7744
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
  • Jones, Timothy M.
[EN] Graph processing is increasingly adopted to solve problems that span many application domains, including scientific computing, social networks, and big-data analytics. These applications present particular features (huge working sets and irregular scalability) that make the default Linux scheduler, which adopts a time-sharing policy to provide a fair scheduler, perform poorly when co-locating multiple graph applications in the same processor. This work focuses on maximizing processor utilization, which is a major concern of current data centers. To this end, we propose AFAIR, a flexible scheduling policy that allocates multiple graph applications on the same processor and assigns a fraction of the cores exclusively to each application instead of sharing them. Moreover, AFAIR dynamically adds/removes cores to the running applications, adapting the number of threads used for parallel execution to balance memory load. This allows AFAIR to achieve almost perfect fairness, on average 95%., This work has been supported by the Spanish Ministerio de Universidades under the grant FPU18/01948 and by the Spanish Ministerio de Ciencia e Innovacion and European ERDF under grants PID2021-123627OB-C51 and TED2021- 130233B-C32.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Comprehensive dynamic models of railway wheelsets and tracks for the prediction of rolling noise

  • Andrés Ruiz, Víctor Tomás
[ES] El ruido de rodadura de vehículos ferroviarios presenta importantes desafíos en entornos urbanos y suburbanos, siendo precisa una comprensión integral de sus mecanismos subyacentes para una mitigación efectiva. Esta Tesis ofrece una investigación exhaustiva sobre la generación de ruido de rodadura, tanto en vías rectas como curvas, a través del desarrollo de modelos avanzados de alta frecuencia y herramientas de cálculo para una rigurosa predicción de niveles de ruido. El ruido de rodadura surge de la interacción entre las ruedas y los carriles en presencia de imperfecciones en sus superficies de contacto. Los principales componentes ferroviarios que contribuyen a la emisión acústica son las traviesas, los carriles y las ruedas. Las traviesas y los carriles están conectados por medio de las placas de asiento, mientras que las ruedas y los carriles están dinámicamente acoplados a través de su contacto. En consecuencia, cambios en cualquier componente pueden afectar al comportamiento dinámico y acústico del resto, subrayando la necesidad de un modelo integral para abordar eficazmente la radiación por ruido de rodadura. En esta Tesis se exploran y desarrollan diferentes modelos dinámicos de la vía y del eje montado. La vía, que se asume infinita, se describe utilizando la teoría de estructuras periódicas y se caracteriza por sus números y formas de onda. El eje montado se modeliza mediante el Método de Elementos Finitos y se caracteriza por sus frecuencias naturales y modos de vibración. La interacción rueda/carril se describe como una relación linealizada entre el movimiento relativo de ambos componentes y las fuerzas de contacto. Cabe indicar que los modelos explorados en este trabajo están formulados en el dominio de la frecuencia. Asimismo, se realiza un estudio de influencia del diseño de la vía en la radiación por ruido de rodadura, cuantificando los parámetros contribuyentes a la emisión acústica mediante técnicas estadísticas. Los resultados apuntan a que la geometría del carril tiene un impacto limitado en la radiación, mientras que las propiedades viscoelásticas de la vía, en particular la rigidez de la placa de asiento, desempeñan un papel fundamental en la generación de ruido. Es remarcable que, entre los distintos diseños, se han encontrado variaciones de hasta 7,4 dB(A) en la radiación acústica. Durante el desarrollo de esta investigación, se ha prestado atención al modelizado del eje montado. Su rotación se incluye usando coordenadas Eulerianas, lo que resulta un enfoque conveniente ya que el punto de contacto de la rueda con el carril permanece en una posición espacial constante. Dada la simetría axial de su geometría, la respuesta dinámica del eje montado se expande a lo largo de la dirección circunferencial mediante series de Fourier, lo que permite formular el comportamiento dinámico y acústico de este cuerpo tridimensional (3D) en un marco bidimensional (2D), resolviendo analíticamente la coordenada circunferencial. Esta metodología ofrece sin pérdida de generalidad una reducción del tiempo de cálculo computacional, lo que hace que el modelo sea idóneo para su integración en algoritmos de optimización. Por último, se realiza una investigación pionera sobre el ruido de rodadura cuando el vehículo negocia una curva. Si bien la curva está generalmente asociada con el ruido por chirridos, esta Tesis explora y confirma la importancia que también tiene el ruido de rodadura en estas condiciones. Para ello, se modelizan los efectos inerciales y giroscópicos que sufre un eje montado al describir una trayectoria curva. Además, diferentes fenómenos complejos que ocurren en el contacto rueda/carril, como por ejemplo el movimiento relativo entre estos elementos, se incorporan en el modelo de interacción. Los resultados indican que la posición del contacto rueda/carril sirve como un buen indicador del impacto que la negociación de una curva tiene en el ruido de rodadura., [CA] El soroll de rodament de vehicles ferroviaris presenta importants reptes en entorns urbans i suburbans, requerint una comprensió integral dels seus mecanismes subjacents per a una mitigació efectiva. Aquesta Tesi ofereix una investigació exhaustiva sobre la generació de soroll de rodament, tant en vies rectes com corbes, mitjançant el desenvolupament de models avançats d'alta freqüència i eines de càlcul per a la rigorosa predicció dels nivells de soroll radiat. El soroll de rodament sorgeix de la interacció entre les rodes i els carrils en presència d'imperfeccions en les seues superfícies de contacte. Els principals components ferroviaris que contribueixen a l'emissió acústica són les travesses, els carrils i les rodes. Les travesses i els carrils estan connectats a través de les plaques d'assentament, mentre que les rodes i els carrils estan acoblats mitjançant la seua interacció. En conseqüència, canvis en qualsevol component poden afectar al comportament dinàmic i acústic de la resta, subratllant la necessitat d'un model integral. En aquesta Tesi s'exploren i desenvolupen diversos models dinàmics de la via i de l'eix muntat. La via, que es considera infinita, es descriu utilitzant la teoria d'estructures periòdiques i es caracteritza pels seus números i formes d'ona. L'eix muntat es modelitza mitjançant el Mètode d'Elements Finits i es caracteritza per les seues freqüències naturals i modes de vibració. La interacció entre l'eix muntat i la via es descriu com una relació linealitzada entre el moviment relatiu d'ambdós components i les forces de contacte. Cal assenyalar que els models explorats en aquest treball estan formulats en el domini de la freqüència. Així mateix, es realitza un estudi d'influència del disseny de la via en la radiació, quantificant els paràmetres contribuents a l'emissió acústica mitjançant tècniques estadístiques. Els resultats apunten que la geometria del carril té un impacte limitat en la radiació sonora, mentre que les propietats viscoelàstiques de la via, en particular la rigidesa de la placa d'assentament, tenen un paper fonamental en la generació de soroll. És destacable que, entre els diferents dissenys, s'han trobat variacions de fins a 7,4 dB(A) en la radiació per soroll de rodament. Durant el desenvolupament d'aquesta investigació, s'ha prestat atenció al modelatge de l'eix muntat. La seua rotació s'inclou en la formulació utilitzant coordenades Eulerianes, la qual cosa resulta un enfocament convenient ja que el punt de contacte de la roda amb el carril roman en una posició constant. Donada la simetria axial de la seua geometria, la resposta dinàmica de l'eix muntat s'amplia al llarg de la direcció circumferencial mitjançant sèries de Fourier, permetent formular el comportament dinàmic i acústic d'aquest cos tridimensional (3D) en un marc bidimensional (2D), i resolent la coordenada circumferencial analíticament. Aquesta metodologia ofereix sense pèrdua de generalitat una reducció del temps de càlcul computacional, la qual cosa fa que el model siga idoni per a la seua integració en algoritmes d'optimització. Finalment, es realitza una investigació pionera sobre el soroll de rodament quan el vehicle negocia una corba. Si bé la corba està generalment associada amb el soroll per grinyols, aquesta Tesi explora i confirma la importància que també té el soroll de rodament en aquestes condicions. Per a això, es modelitzen els efectes inercials i giroscòpics que pateix un eix muntat al descriure una trajectòria corba. A més, diferents fenòmens complexes que ocorren en el contacte roda/carril, com el moviment relatiu entre aquests elements, s'incorporen en el model d'interacció. Els resultats indiquen que la posició del contacte roda/carril serveix com un bon indicador de l'impacte que la negociació d'una corba té en el soroll de rodament., [EN] Rolling noise emission in railway systems presents significant challenges in urban and suburban environments, requiring a comprehensive understanding of its underlying mechanisms for effective mitigation. This Thesis offers a thorough investigation into rolling noise generation, considering both tangent and curved tracks, through the development of advanced high-frequency models and calculation tools to predict noise levels accurately. Rolling noise arises from the interaction between railway wheels and tracks in the presence of roughness on their contact surfaces. The principal components contributing to the acoustic emission are the sleepers, rails, and wheels. Sleepers and rails are interconnected through rail pads, while wheels and rails are dynamically coupled due to their contact. Consequently, changes in any component might impact the dynamic and acoustic behaviour of all of them, outlining the necessity of a comprehensive model to address rolling noise radiation effectively. Various models for the track and wheelset are explored and developed in this Thesis. The track, assumed to be infinite, is described using periodic structure theory and it is characterised by its wavenumbers and waveshapes. The wheelset is modelled through the Finite Element Method (FEM) and it is characterised by its natural frequencies and vibration modes. The wheelset and track interaction is described as a linearised relationship between the relative motion of both components and the contact forces. The models examined in this work are formulated in the frequency domain. Identified track properties influencing rolling noise radiation are quantified using statistical techniques. While the rail geometry is found to have a limited impact on the total radiation, the viscoelastic properties of the track, particularly the rail pad stiffness, play a crucial role in noise generation. Variations up to 7.4 dB(A) were observed for different track designs. Special attention is devoted to the wheelset modelling in this Thesis. Its rotation is considered using Eulerian coordinates, a convenient approach as the wheel contact point with the rail remains at a constant spatial position. Given the axial symmetry of its geometry, the wheelset dynamic response is expanded around the circumferential direction using Fourier series, which yields a two-dimensional (2D) formulation of the dynamic and acoustic behaviour of this three-dimensional (3D) system, with the circumferential coordinate being solved analytically. This methodology, denoted as axisymmetric approach, offers a significant reduction in the associated computational calculation time while preserving accuracy, making the model well suited for its integration into optimisation algorithms. Lastly, a novel investigation into rolling noise when the vehicle negotiates a curve is conducted. While curved tracks are generally associated with squeal noise, this Thesis offers valuable insights into the importance of rolling noise as well. To achieve this, the inertial and gyroscopic effects associated with a wheelset running on a curve are modelled. Complex phenomena occurring at the wheel/rail contact, such as the relative motion between these two elements, are incorporated into the interaction model. The results indicate that the wheel/rail contact position serves as a reliable indicator of the impact of a curve on the rolling noise., This Thesis has been supported by Ministerio de Ciencia, Innovación y Universidades in the framework of the FPU grant program. Grants FPU18/03999, EST21/00213, and EST22/00353 as well as projects TRA2017-84701-R, PID2020-112886RA-I00, and PID2023-148483OB-I00 funded by MCIN/AEI/10.13039/501100011033, “ESF Investing in your future”, and “ERDF A way of making Europe” are acknowledged. The author also expresses his gratitude for the support provided by Programa PROMETEO/2021/046 of Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Development of hybrid monoliths incorporating metal¿organic frameworks for stir bar sorptive extraction coupled with liquid chromatography for determination of estrogen endocrine disruptors in water and human urine samples

  • Zatrochová, S.
  • Martínez-Pérez-Cejuela, H.
  • Simó-Alfonso, E. F.
  • Lhotská, I.
  • atínský, D.
  • Herrero-Martínez, J. M.
  • Catalá-Icardo, Mónica|||0000-0001-5897-8501
[EN] A novel coating based on hybrid monolith with metal-organic framework (MOF) onto conventional Teflon-coated magnetic stir bars was developed. For this purpose, the external surface of the Teflon stir bar was firstly vinylized in order to immobilize a glycidyl methacrylate (GMA)-based polymer onto the magnet. Then, an amino-modified MOF of type MIL-101 (NH2-MIL-101(Al)) was covalently attached to the GMA-based monolith. After the synthesis process, several parameters affecting extraction of target estrogens by stir bar sorptive extraction (SBSE) including pH, ionic strength, extraction time, stirring rate, desorption solvent, and desorption time were also investigated. The resulting hybrid monolith was evaluated as SBSE sorbent for extraction of three estrogens (estrone, 17 beta-estradiol, estriol) and synthetic 17 beta-ethinylestradiol from water and human urine samples followed by HPLC with fluorescence detection (excitation and emission wavelengths, 280 and 310 nm, respectively). Under the optimal experimental conditions, the analytical figures of the method were established, achieving satisfactory limits of detection in the range of 0.015-0.58 mu g L-1, recovery results ranging from 70 to 95% with RSD less than 6%, and precision values (intra- and inter-extraction units) below 6%., H. Martinez-Perez-Cejuela thanks the MSIU for a PhD FPU grant (ref. FPU18/02179). S. Z., I. L., and D. S. acknowledge the financial support of the Charles University (Project SVV 260 548), Charles University Grant Agency (Project GAUK No. 1070120), and EFSA-CDN project (no. CZ.02.1.01/0.0/0.0/16_019/0000841) cofunded by ERDF. This article is based upon work from the Sample Preparation Task Force and Network, supported by the Division of Analytical Chemistry of the European Chemical Society.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Comparative Analysis of Chromatin-Delivered Biomarkers in the Monitoring of Sepsis and Septic Shock: A Pilot Study

  • Beltrán-García, Jesús
  • García-López, Eva M.
  • Carbonell, Nieves
  • Ferreres, José
  • Rodríguez-Gimillo, María
  • Garcés, Concepción
  • Pallardó, Federico V.
  • García-Giménez, José L.
  • Montoya, Ángel
  • Romá-Mateo, Carlos
  • Manclus Ciscar, Juan José|||0000-0001-6720-1534
[EN] Sepsis management remains one of the most important challenges in modern clinical practice. Rapid progression from sepsis to septic shock is practically unpredictable, hence the critical need for sepsis biomarkers that can help clinicians in the management of patients to reduce the proba-bility of a fatal outcome. Circulating nucleoproteins released during the inflammatory response to infection, including neutrophil extracellular traps, nucleosomes, and histones, and nuclear pro-teins like HMGB1, have been proposed as markers of disease progression since they are related to inflammation, oxidative stress, endothelial damage, and impairment of the coagulation response, among other pathological features. The aim of this work was to evaluate the actual potential for decision making/outcome prediction of the most commonly proposed chromatin-related bi-omarkers (i.e., nucleosomes, citrullinated H3, and HMGB1). To do this, we compared different ELISA measuring methods for quantifying plasma nucleoproteins in a cohort of critically ill pa-tients diagnosed with sepsis or septic shock compared to nonseptic patients admitted to the inten-sive care unit (ICU), as well as to healthy subjects. Our results show that all studied biomarkers can be used to monitor sepsis progression, although they vary in their effectiveness to separate sepsis and septic shock patients. Our data suggest that HMGB1/citrullinated H3 determination in plasma is potentially the most promising clinical tool for the monitoring and stratification of septic patients., This activity received funding from the European Institute of Innovation and Technology (EIT). This body of the European Union receives support from the European Union's Horizon 2020 research and innovation program. C.R-M. thanks GVA for starting grant (GV/2018/127) and Spanish Ministry of Science and Innovation for research project (PID2020-119127RA-I00); J.B-G thanks ISCIII, AES2018 for iPFIS fellowship (IFI18/00015) and GVA for APOTI fellowship (APOTIP/2017/012); CG thanks Spanish Ministry of Universities for fellowship FPU18/03969; J.L.G-G and F.V.P thank INCLIVA, GVA and AES2016 and AES2019 (ISCIII) for starting grant (GV/2014/132), project PI16/01036 and PI19/00994 and project DTS17/00132 (co-financed by the ERDF). The project leading to these results has received funding from "la Caixa" Foundation (ID 100010434), under agreement CI18-0009. C.R-M., F.V.P. and A.M. thank Grand Challenges Canada. : We want to particularly acknowledge the patients and the INCLIVA Biobank (PT17/0015/0049; B.000768 ISCIII) integrated in the Valencian Biobanking Network and the Spanish National Biobanks Network for their collaboration.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A quantitative autonomous bioluminescence reporter system with a wide dynamic range for Plant Synthetic Biology

  • Calvache-Román, Camilo Alberto
  • Vázquez-Vilar, Marta
  • Moreno-Giménez, Elena
  • Orzáez Calatayud, Diego Vicente
[EN] Plant Synthetic Biology aims to enhance the capacities of plants by designing and integrating synthetic gene circuits (SGCs). Quantitative reporting solutions that can produce quick, rich datasets affordably are necessary for SGC optimization. In this paper, we present a new, low-cost, and high-throughput reporter system for the quantitative measurement of gene expression in plants based on autonomous bioluminescence. This method eliminates the need for an exogenous supply of luciferase substrate by exploiting the entire Neonothopanus nambi fungal bioluminescence cyclic pathway to build a self-sustained reporter. The HispS gene, the pathway's limiting step, was set up as the reporter's transcriptional entry point as part of the new system's design, which significantly improved the output's dynamic range and brought it on par with that of the gold standard FLuc/RLuc reporter. Additionally, transient ratiometric measurements in N. benthamiana were made possible by the addition of an enhanced GFP as a normalizer. The performance of new NeoLuc/eGFP system was extensively validated with SGCs previously described, including phytohormone and optogenetic sensors. Furthermore, we employed NeoLuc/eGFP in the optimization of challenging SGCs, including new configurations for an agrochemical (copper) switch, a new blue optogenetic sensor, and a dual copper/red-light switch for tight regulation of metabolic pathways., The authors would like to thank Matias Zurbriggen for sharing the plasmids of the red-light system and Jorge Lozano-Juste for sharing the plasmid with the MAPKKK18 promoter. The authors also would like to thank Alberto Conejero for his assistance with data analysis.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Prediction of Drug-Induced Proarrhythmic Risk through Modelling and Simulation of Cardiac Electrophysiological Activity

  • Llopis Lorente, Jordi
[ES] La Torsade de Pointes (TdP) es una arritmia ventricular grave y potencialmente mortal. Este tipo de arritmia puede aparecer por diversas causas, siendo una de las más relevantes la toma de medicamentos. La TdP inducida por fármacos constituye un reto en seguridad farmacológica, llegando a ser responsable de la retirada de muchos fármacos del mercado. Por ello, realizar una correcta predicción del riresgo proarrítmico de los fármacos es crucial para la seguridad de los pacientes. Aunque los métodos actuales de evaluación del riesgo de TdP son eficaces, resultan costosos y presentan limitaciones. En los últimos años, las simulaciones cardíacas in silico han surgido como herramientas prometedoras para mejorar la evaluación farmacológica, complementando los métodos de evaluación actuales y mejorando la eficiencia y la precisión. El objetivo principal de esta tesis doctoral ha sido desarrollar herramientas computacionales para mejorar la predicción del riesgo proarrítmico inducido por fármacos. La metodología se ha basado principalmente en una versión modificada del modelo computacional del potencial de acción ventricular de O'Hara. En primer lugar, este modelo in silico se utilizó para simular los efectos de 109 fármacos y analizar distintos biomarcadores como Tx, TqNet, Ttriang y TEAD con el fin de construir herramientas de predicción de TdP. En segundo lugar, se estudió el papel de la variabilidad electrofisiológica. Para ello, se construyó una población de más de 800 modelos electrofisiológicos para simular las diferencias interindividuales en la respuesta a la exposición a fármacos y se desarrolló un clasificador ternario basado en Máquinas de Vectores de Soporte. Finalmente, se analizó el impacto del sexo y la función renal mediante la integración de modelos farmacocinéticos (PK) y una población de modelos electrofisiológicos (EP) de 300 hombres y 300 mujeres. El clasificador binario basado en árboles de decisión, que combina los biomarcadores Tx, TqNet, Ttriang, logró un accuracy del 94,5%, superando los resultados de la prueba utilizada actualmente por las agencias reguladoras, el test hERG IC50, que obtuvo un accuracy del 78,9%. Además, el estudio identificó que los cambios en las corrientes iónicas IKr, ICaL, INaL e IKs fueron los principales responsables del riesgo de TdP. A partir de estos hallazgos, se desarrolló una herramienta web basada en más de 450 000 simulaciones que ofrece la posibilidad de evaluar el riesgo proarrítmico de un fármaco de forma rápida y sencilla. Por otro lado, el clasificador ternario que consideraba la variabilidad interindividual aumentó la accuracy de la predicción de riesgo de TdP en más de un 20% en comparación con el clasificador sin variabilidad interindividual. Respecto al efecto del sexo y la función renal, las simulaciones evidenciaron que las mujeres con función renal alterada presentan mayor susceptibilidad a las arritmias inducidas por fármacos. Además, la metodología propuesta integrando los modelos PK y EP ayudó a determinar los regímenes de máxima dosis segura para subgrupos específicos de pacientes. Además, como prueba de concepto, también se realizaron simulaciones en 3D de los efectos del dofetilide, obteniendo prolongaciones del intervalo QT similares a los datos clínicos publicados. En conclusión, las metodologías desarrolladas en esta tesis doctoral mejoran la predicción del riesgo de TdP inducida por fármacos, contribuyendo al desarrollo de medicamentos más seguros y a estrategias de tratamiento más personalizadas. Los resultados presentados demuestran el impacto que pueden tener las herramientas in silico en el avance de las evaluaciones de seguridad farmacológica. Además, se espera que los hallazgos de esta tesis doctoral abran nuevas vías para futuras investigaciones en el ámbito de las simulaciones cardiacas in silico, lo que en última instancia conducirá a mejores evaluaciones de seguridad cardíaca y a una mayor seguridad farmacológica en general., [CA] La Torsade de Pointes (TdP) és una arrítmia ventricular greu i potencialment mortal. Este tipus d'arrítmia pot aparèixer per diverses causes, sent una de les més rellevants l'administració de medicaments. La TdP induïda per fàrmacs representa un repte en l'àmbit de la seguretat farmacològica, ja que ha sigut responsable de la retirada de molts fàrmacs del mercat. Per això, realitzar una correcta predicció del risc proarrítmic dels fàrmacs és crucial per a la seguretat dels pacients. Encara que els mètodes actuals d'avaluació del risc de TdP són eficaços, resulten costosos i presenten limitacions per a reflectir les complexes interaccions entre els fàrmacs i el teixit cardíac en determinades situacions. En els últims anys, les simulacions cardíaques in silico han sorgit com a eines prometedores per a millorar l'avaluació farmacològica, complementant els mètodes actuals i augmentant l'eficiència i la precisió. L'objectiu d'aquesta tesi doctoral ha sigut desenvolupar eines computacionals per a millorar la predicció del risc proarrítmic induït per fàrmacs. La metodologia s'ha basat en una versió modificada del model de potencial d'acció ventricular d'O'Hara. En primer lloc, aquest model in silico es va utilitzar per a simular els efectes de 109 fàrmacs amb riscos torsadogènics coneguts i analitzar biomarcadors com Tx, TqNet, Ttriang i TEAD, per a construir eines de predicció de TdP. En segon lloc, es va estudiar el paper de la variabilitat electrofisiològica. Per a això, es va construir una població de més de 800 models electrofisiològics amb l'objectiu de simular les diferències interindividuals en la resposta als fàrmacs, i es va desenvolupar un classificador ternari basat en Màquines de Vectors de Suport (SVM). Finalment, es va analitzar l'impacte del sexe i la funció renal en el risc de TdP, mitjançant la integració de models farmacocinètics (PK) amb una població de models electrofisiològics (EP) de 300 homes i 300 dones. El classificador binari basat en arbres de decisió, que combinava els biomarcadors Tx, TqNet i Ttriang, va aconseguir una accuracy del 94,5%, superant la prova utilitzada actualment per les agències reguladores, el test hERG IC50, que va obtindre un 78,9% de accuracy. A més, aquest estudi va identificar que els canvis en les corrents iòniques IKr, ICaL, INaL i IKs són els principals determinants del risc de TdP. A partir d'aquests resultats, es va desenvolupar una eina web basada en més de 450 000 simulacions que permet una avaluació ràpida i senzilla del risc proarrítmic d'un fàrmac. D'altra banda, el classificador ternari que considerava la variabilitat interindividual va augmentar l'accuracy de la predicció de TdP en més d'un 20% en comparació amb el classificador sense variabilitat interindividual. Pel que fa a l'efecte del sexe i la funció renal, les simulacions van evidenciar que les dones amb funció renal deteriorada són més susceptibles a les arrítmies induïdes per fàrmacs. A més, la metodologia proposta basada en la integració de models PK i EP, va ajudar a determinar els règims de màxima dosi segura per a subgrups específics de pacients. A més, com a prova de concepte, també es van realitzar simulacions 3D dels efectes del dofetilide, obtenint prolongacions de l'interval QT similars a les dades clíniques reportades. En conclusió, les metodologies desenvolupades en aquesta tesi doctoral milloren la predicció del risc de TdP induït per fàrmacs, contribuint a un desenvolupament de medicaments més segurs i a estratègies terapèutiques més personalitzades. Els resultats presentats demostren l'impacte que poden tenir les eines in silico en el progrés de les avaluacions de seguretat farmacològica. A més, s'espera que els resultats d'aquesta tesi doctoral òbriguen noves vies per a futures investigacions en l'àmbit de les simulacions cardíaques in silico, la qual cosa, en última instància, conduirà a millors avaluacions de seguretat cardíaca i a una major seguretat farmacològica en general., [EN] Torsade de Pointes (TdP) is a severe and potentially life-threatening ventricular arrhythmia. This type of arrhythmia can occur due to various causes, one of the most relevant being the administration of certain medications. Drug-induced TdP represents a significant challenge in the field of drug safety, as it has been responsible for the withdrawal of numerous drugs from the market. Therefore, accurate prediction of the proarrhythmic potential of drugs is crucial for patient safety. While current TdP risk assessment methods are effective, they are expensive and have limitations in capturing the complex interactions between drugs and cardiac tissue in certain scenarios. In recent years, in silico cardiac simulations have emerged as promising tools for improving drug evaluation, complementing existing methods, and enhancing both efficiency and accuracy. This PhD thesis aims to develop computational tools to improve the prediction of drug-induced proarrhythmic risk. The methodology is primarily based on a modified version of the O'Hara and colleagues' ventricular action potential model. First, this in silico model was used to simulate the effects of 109 drugs with known torsadogenic risks and to analyse biomarkers such as Tx, TqNet, Ttriang, and TEAD, enabling the development of TdP prediction tools. Second, the role of electrophysiological variability in TdP risk assessment was studied. A population of over 800 electrophysiological models was constructed to simulate inter-individual differences in drug response, and a ternary classifier was developed using Support Vector Machines (SVM). Finally, the impact of sex and renal function on drug-induced TdP risk was analysed by integrating pharmacokinetic (PK) models with a population of electrophysiological (EP) models of 300 males and 300 females. The binary decision-tree classifier that combined the biomarkers Tx, TqNet, and Ttriang achieved an accuracy of 94.5%, outperforming the current regulatory test, hERG IC50, which reached an accuracy of 78.9%. Additionally, the study identified that changes in the IKr, ICaL, INaL, and IKs currents were the primary determinants of TdP risk. These findings led to the development of a web-based tool based on over 450 000 simulations, offering a rapid and straightforward assessment of the proarrhythmic risk of a compound. Furthermore, the ternary classifier that incorporates inter-individual variability increased TdP risk prediction accuracy by more than 20% compared to the classifier that did not consider inter-individual variability. Regarding sex and renal function, simulations demonstrated that women with impaired renal function were more susceptible to drug-induced arrhythmias. The proposed PK/EP model integration also helped determine the maximum safe dosing regimens for specific patient subgroups. In addition, as a proof of concept, 3D simulations of dofetilide were performed, yielding QT prolongations consistent with reported clinical data. In conclusion, the methodologies developed in this PhD thesis enhance the prediction of drug-induced TdP risk, contributing to safer drug development and more personalized treatment strategies. The results highlight the impact in silico tools can have on advancing cardiac safety assessments. Furthermore, these findings are expected to pave the way for future research aimed at refining in silico cardiac simulations, ultimately leading to improved cardiac safety evaluations and enhanced overall drug safety., This work was partially supported by the Dirección general de Política Científica de la Generalitat Valenciana (PROMETEU2020/043); by “Primeros Proyectos de Investigación” (PAID-06-18) from Vicerrectorado de Investigación, Innovación y Transferencia de la Universitat Politècnica de València (UPV), València, Spain; as well as from the “Plan Estatal de Investigación Científica y Técnica y de Innovación 2017-2020” from the Ministerio de Ciencia e Innovación y Universidades (PID2019-104356RB-C41/AEI710.13039/501100011033). J.L.L. is being funded by the Ministerio de Ciencia, Innovación y Universidades for the “Formación de Profesorado Universitario” (grant reference: FPU18/01659). This project received funding from the European Union’s Horizon 2020 Research and Innovation Program under grant agreement No. 101016496 (SimCardioTest). The authors also thankfully acknowledge the computer resources at MareNostrum and the technical support provided by Barcelona Supercomputing Center (IM-2021-1-0001, IM-2021-1-0003, IM-2022-1-0002, IM-2023-1-0002). JL is being funded by the Ministerio de Ciencia, Innovación y Universidades for the Formación de Profesorado Universitario (grant reference: FPU18/01659). Funding for open access charge: Universitat Politècnica de València
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Deep continual learning for medical call incidents text classification under the presence of dataset shifts

  • Ferri-Borredà, Pablo|||0000-0002-3083-1169
  • Sáez Silvestre, Carlos|||0000-0003-2678-8249
  • Garcia-Gomez, Juan M
  • Lomonaco, Vincenzo
  • Passaro, Lucia C.
  • Félix-De Castro, Antonio
  • Sánchez-Cuesta, Purificación
[EN] The aim of this work is to develop and evaluate a deep classifier that can effectively prioritize Emergency Medical Call Incidents (EMCI) according to their life-threatening level under the presence of dataset shifts. We utilized a dataset consisting of 1 982 746 independent EMCI instances obtained from the Health Services Department of the Region of Valencia (Spain), with a time span from 2009 to 2019 (excluding 2013). The dataset includes free text dispatcher observations recorded during the call, as well as a binary variable indicating whether the event was life-threatening. To evaluate the presence of dataset shifts, we examined prior probability shifts, covariate shifts, and concept shifts. Subsequently, we designed and implemented four deep Continual Learning (CL) strategies¿cumulative learning, continual fine-tuning, experience replay, and synaptic intelligence¿alongside three deep CL baselines¿joint training, static approach, and single finetuning¿based on DistilBERT models. Our results demonstrated evidence of prior probability shifts, covariate shifts, and concept shifts in the data. Applying CL techniques had a statistically significant (¿ = 0.05) positive impact on both backward and forward knowledge transfer, as measured by the F1-score, compared to noncontinual approaches. We can argue that the utilization of CL techniques in the context of EMCI is effective in adapting deep learning classifiers to changes in data distributions, thereby maintaining the stability of model performance over time. To our knowledge, this study represents the first exploration of a CL approach using real EMCI data., This work has received support from the Ministry of Science, Innovation, and Universities of Spain through the FPU18/06441 program. In addition, it has been partly funded by PNRR-M4C2-Investimento 1.3, Partenariato Esteso PE00000013-FAIR-Future Artificial Intelligence Research-Spoke 1 Human-centered AI, funded by the European Commission under the NextGeneration EU programme.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Extremely missing numerical data in Electronic Health Records for machine learning can be managed through simple imputation methods considering informative missingness: A comparative of solutions in a COVID-19 mortality case study

  • Ferri-Borredà, Pablo|||0000-0002-3083-1169
  • Garcia-Gomez, Juan M
  • Sáez Silvestre, Carlos|||0000-0003-2678-8249
  • Romero-Garcia, Nekane
  • Badenes, Rafael
  • Lora-Pablos, David
  • García Morales, Teresa
  • Gómez de la Cámara, Agustín
[EN] Background and objective: Reusing Electronic Health Records (EHRs) for Machine Learning (ML) leads on many occasions to extremely incomplete and sparse tabular datasets, which can hinder the model development processes and limit their performance and generalization. In this study, we aimed to characterize the most effective data imputation techniques and ML models for dealing with highly missing numerical data in EHRs, in the case where only a very limited number of data are complete, as opposed to the usual case of having a reduced number of missing values. Methods: We used a case study including full blood count laboratory data, demographic and survival data in the context of COVID-19 hospital admissions and evaluated 30 processing pipelines combining imputation methods with ML classifiers. The imputation methods included missing mask, translation and encoding, mean imputation, k-nearest neighbors' imputation, Bayesian ridge regression imputation and generative adversarial imputation networks. The classifiers included k-nearest neighbors, logistic regression, random forest, gradient boosting and deep multilayer perceptron. Results: Our results suggest that in the presence of highly missing data, combining translation and encoding imputation-which considers informative missingness-with tree ensemble classifiers-random forest and gradient boosting-is a sensible choice when aiming to maximize performance, in terms of area under curve. Conclusions: Based on our findings, we recommend the consideration of this imputer-classifier configuration when constructing models in the presence of extremely incomplete numerical data in EHR., This work was supported by FONDO SUPERA COVID-19 by CRUE-Santander Bank grant "Severity Subgroup Discovery and Classification on COVID-19 Real World Data through Machine Learning and Data Quality assessment (SUBCOVERWD-19) " and by the Ministry of Science, Innovation and Universities of Spain program FPU18/06441.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influence of short-term operating temperatures on compression and flexural behaviour of Macro Synthetic and Steel Fibre Reinforced Concretes

  • Caballero-Jorna, Marta
  • Roig-Flores, Marta
  • Serna, Pedro
[EN] This study investigates the influence of operating temperatures on the mechanical properties of Fibre Reinforced Concretes (FRCs) when exposed during short-term periods (3 days). The studied parameters include types of fibres (macro synthetic and steel fibres), exposure to different envi-ronmental scenarios (with temperatures of -15, 5, 20, 40 and 60 & DEG;C as well as air exposition or submerged condition), and cracking conditions (precracked up to 0.5 mm or uncracked). A total of 126 cubes of 150 mm side and 182 prisms of 150 x 150 x 600 mm3 were tested in compres-sion and flexion at the operating temperatures. The compression results obtained show similar ef-fects in FRC and in plain concrete, with higher strength at low temperatures and slightly lower strength at higher temperatures. Similar effects were detected for the strength at the peak load, and to a minor extent, for the residual flexural strengths, for all the FRCs., The authors thank to the Spanish Ministry of Science, Innovation and Universities for the funding received under the FPU Program [grant number FPU18/06145].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Comparative Life Cycle Analysis of Concrete and Composite Bridges Varying Steel Recycling Ratio

  • Martínez-Muñoz, D.|||0000-0002-6906-3830
  • Martí Albiñana, José Vicente|||0000-0002-2435-4095
  • Yepes, V.|||0000-0001-5488-6001
[EN] Achieving sustainability is currently one of the main objectives, so a consensus between different environmental, social, and economic aspects is necessary. The construction sector is one of the main sectors responsible for environmental impacts worldwide. This paper proposes the life cycle assessment (LCA) and comparison of four bridge deck alternatives for different span lengths to determine which ones are the most sustainable solutions. The ReCiPe method is used to conduct the life cycle analysis, by means of which the impact value is obtained for every alternative and span length. The Ecoinvent 3.3 database has been used. The life cycle has been divided into four phases: manufacturing, construction, use and maintenance, and end of life. The associated uncertainties are considered, and the results are shown in both midpoint and endpoint approaches. The results of our research show that for span lengths less than 17 m, the best alternative is the prestressed concrete solid slab. For span lengths between 17 and 25 m, since the box-girder solution is not used, then the prestressed concrete lightened slab is the best alternative. For span lengths between 25 and 40 m, the best solution depends on the percentage of recycled structural steel. If this percentage is greater than 90%, then the best alternative is the composite box-girder bridge deck. However, if the percentage is lower, the cleanest alternative is the prestressed concrete box-girder deck. Therefore, the results show the importance of recycling and reusing structural steel in bridge deck designs., This research was funded by Spanish Ministry of Economy and Business (Project: BIA201785098-R), the Spanish Ministry of Science and Innovation (Project: PID2020-117056RB-I00), along with FEDER funding and Spanish Ministry of Science, Innovation and Universities for David MartinezMunoz's University Teacher Training Grant (FPU-18/01592).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Research software Software (Software)

Application of Machine Learning to improve the efficiency of electrophysiological simulations used for the prediction of drug-induced ventricular arrhythmia

  • Rodríguez-Belenguer, Pablo
  • Kopańska, Karolina
  • Llopis Lorente, Jordi
  • Pastor, Manuel
  • Trenor Gomis, Beatriz Ana|||0000-0001-9166-6112
  • Saiz Rodríguez, Francisco Javier|||0000-0002-9850-0825
In cardiotoxicity studies it is common to pre-compute the values of different biomarkers (my equation or TX) for a range of ion channel blockades. Since every simulation requires costly computations, to complete the matrix of simulations for several ion channels can be cumbersome. Some examples of how these simulations are run and used are included in the references. The relationship between the input values and the biomarker is not too complex and Machine Learning can be used to obtain a good approximation. The resulting function can be generated using only an small fraction of the computations required to generate the whole matrix. This function can then be used to predict the biomarker value for any combination of the covered range, with an excellent accuracy In this repository we have included a jupyter notebook and some simulation results that demonstrate this idea. Regarding the data matrices, they correspond to simulations using a modified version of the ventricular action potential model by O'Hara et al., which have been performed by Jordi Llopis, Beatriz Trenor and Javier Saiz at the Centro de Investigación e Innovación en Bioingeniería (Ci2B), Universitat Politècnica de València, Valencia, Spain KrKsCaL.xlsx: This is the data matrix needed to build the ML models. APD90_12CiPA_drugs_IKrIKsICaL.xlsx: This excel file contains the input and output values for CiPA compounds. EFTPC_IC50_28_CiPADrugs.xlsx: This file contains D, my equation and hill coefficient to calculate the input values for CiPA compounds of the previous excel file. Folder "Matrix Building": This folder contains MATLAB functions for generating the KrKsCaL matrix. The script "buildMatrixKrKsNaL.m" is the main script which run the electrophysioloigcal simulations and generates the matrix References Llopis J, Cano J, Gomis-Tena J, Romero L, Sanz F, Pastor M, Trenor B, Saiz J. In silico assay for preclinical assessment of drug proarrhythmicity. J Pharmacol Toxicol Methods 2019 99: 106595. PMID: 31962986 DOI: 10.1016/j.vascn.2019.05.106. O’Hara, T., Virág, L., Varró, A. & Rudy, Y. Simulation of the Undiseased Human Cardiac Ventricular Action Potential: Model Formulation and Experimental Validation. PLOS Comput. Biol. 7, e1002061 (2011). Licensing CardioML was produced at the PharmacoInformatics lab (http://phi.upf.edu), in the framework of the eTRANSAFE project (http://etransafe.eu). eTRANSAFE has received support from IMI2 Joint Undertaking under Grant Agreement No. 777365. This Joint Undertaking receives support from the European Union’s Horizon 2020 research and innovation programme and the European Federation of Pharmaceutical Industries and Associations (EFPIA). Copyright 2022 Manuel Pastor (manuel.pastor@upf.edu) CardioML is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation version 3. CardioML is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with CardioML source code. If not, see http://www.gnu.org/licenses/.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Numerical Analysis of the Effects of Different Rotor Tip Gaps in a Radial Turbine Operating at High Pressure Ratios Reaching Choked Flow

  • Galindo, José|||0000-0001-6068-182X
  • Tiseira, Andrés-Omar|||0000-0001-9472-2386
  • Navarro, Roberto|||0000-0003-2587-4954
  • Echavarria-Olaya, Juan David|||0000-0002-9611-0751
  • Inhestern, Lukas Benjamin
[EN] To operate, radial turbines used in turbochargers require a minimum tip gap between the rotor blades and the stationary wall casing (shroud). This gap generates leakage flow driven by the pressure difference between the pressure and suction side. The tip leakage flow is largely unturned, which translates into a reduction of the shaft work due to the decrease in the total pressure. This paper investigates the flow through the rotor blade tip gap and the effects on the main flow when the turbine operates at a lower and higher pressure ratio with the presence of supersonic regions at the rotor trailing edge for two rotational speeds using computational fluid dynamics (CFD). The rotor tip gap has been decreased and increased up to 50% of the original tip gap geometry given by the manufacturer. Depending on the operational point, the results reveal that a reduction of 50% of the tip gap can lead to an increase of almost 3% in the efficiency, whereas a rise in 50% in the gap penalty the efficiency up to 3%. Furthermore, a supersonic region appears in the tip gap just when the flow enters through the pressure side, then the flow accelerates, leaving the suction side with a higher relative Mach number, generating a vortex by mixing with the mainstream. The effects of the vortex with the variation of the tip gap on the choked area at the rotor trailing edge presents a more significant change at higher than lower speeds. At a higher speed, the choked region closer to the shroud is due to the high relative inlet flow angle and the effects of the high relative motion of the shroud wall. Furthermore, this relative motion forces the tip leakage vortex to stay closer to the tip suction side, generating a subsonic region, which increases with the tip gap height. The leakage flow at lower and higher rotational speed does not affect the main flow close to the hub. However, close to the shroud, the velocity profile changes, and the generated entropy increases when the flow goes through the tip gap., The work has been partially supported by the Subprograma de Formación de Profesorado Universitario (FPU). Ministerio de Universidades. FPU18/02628.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Streaming Neural Speech Translation

  • Iranzo Sánchez, Javier
[ES] Gracias a avances significativos en aprendizaje profundo, la traducción del habla (ST) se ha convertido en un campo consolidado, lo que permite la utilización de la tecnología ST en soluciones para entornos de producción. Como consecuencia del aumento constante del número de horas de contenido audiovisual generado cada año, así como una mayor sensibilización sobre la importancia de la accesibilidad, la ST está preparada para convertirse en un elemento clave para la producción de contenidos audiovisuales, tanto de ocio como educativos. A pesar de que se ha progresado significativamente en ST, la mayor parte de la investigación se ha centrado en el escenario en diferido (offline), en el cual todo el audio de entrada está disponible. En cambio, la ST en directo (online) es una temática en la que falta mucho por investigar. En concreto, existe un caso de traducción en directo, la traducción continua (streaming), que traduce un flujo continuo de palabras en tiempo real y bajo unas estrictas condiciones de latencia. Este es un problema mucho más realista, que es necesario resolver para que sea posible aplicar la ST a una variedad de tareas de la vida real. Esta tesis está centrada en investigar y desarrollar las técnicas claves que son necesarias para una solución de ST continua. En primer lugar, de cara a permitir el desarrollo y la evaluación de sistemas de ST, se ha recopilado un nuevo conjunto de datos para ST multilingüe, que expande significativamente el número de horas disponibles para ST. A continuación se ha desarrollado un segmentador preparado para la condición continua, que se utiliza para segmentar las transcripciones intermedias de nuestra solución por etapas, que consiste en un sistema de reconocimiento automático del habla (ASR), seguido de un sistema de traducción automática (MT) encargado de traducir las transcripciones intermedias al idioma de destino elegido. Diversas investigaciones han concluido que la calidad de la segmentación es un factor muy influyente es la calidad del sistema MT, por lo que el desarrollo de un segmentador efectivo es un paso fundamental en el proceso de ST continua. Este segmentador se ha integrado en la solución por etapas, y estas se optimizan de manera conjunta para alcanzar el equilibrio óptimo entre calidad y latencia. La ST continua tiene unas restricciones de latencia mucho más estrictas que la ST en directo, ya que el nivel deseado de latencia tiene que mantenerse durante todo el proceso de traducción. Por tanto, es crucial ser capaz de medir de manera precisa esta latencia, pero las métricas estándar de ST en directo no se adaptan bien a esta tarea. Como consecuencia de esto, se proponen nuevos métodos para la evaluación de ST continua, que garantizan unos resultados precisos a la vez que interpretables. Por último, se presenta un nuevo método para mejorar la calidad de la traducción continua mediante el uso de información contextual. Mientras que los sistemas tradicionales de ST en directo traducen audios de manera aislada, existe abundante información contextual que está disponible para mejorar los sistemas de ST continua. Nuestra propuesta introduce el concepto de historia continua, que consiste en el almacenamiento de la información más reciente del proceso de traducción, que se utiliza más adelante por el modelo para mejorar la calidad de la traducción., [CA] Gràcies a avanços significatius en aprenentatge profund, la traducció de la parla (ST) s'ha convertit en un camp consolidat, la qual cosa permet la utilització de la tecnologia ST en solucions per a entorns de producció. A conseqüència de l'augment constant del nombre d'hores de contingut audiovisual generat cada any, així com una major sensibilització sobre la importància de l'accessibilitat, la ST està preparada per a convertir-se en un element clau per a la producció de continguts audiovisuals, tant d'oci com educatius. A pesar que s'ha progressat significativament en ST, la major part de la recerca s'ha centrat en l'escenari en diferit, en el qual tot l'àudio d'entrada està disponible. En canvi, la ST en directe és una temàtica en la qual falta molt per investigar. En concret, existeix un cas de traducció en directe, la traducció contínua, que tradueix un flux continu de paraules en temps real i sota unes estrictes condicions de latència. Aquest és un problema molt més realista, que és necessari resoldre perquè sigui possible aplicar la ST a una varietat de tasques de la vida real. Aquesta tesi està centrada en investigar i desenvolupar les tècniques claus que són necessàries per a una solució de ST contínua. En primer lloc, de cara a permetre el desenvolupament i l'avaluació de sistemes de ST, s'ha recopilat un nou conjunt de dades per a ST multilingüe, que expandeix significativament la quantitat de dades disponibles per a ST. A continuació s'ha desenvolupat un segmentador preparat per a la condició contínua, que s'utilitza per a segmentar les transcripcions intermèdies de la nostra solució per etapes, que consisteix en un sistema de reconeixement automàtic de la parla (ASR), seguit d'un sistema de traducció automàtica (MT) encarregat de traduir les transcripcions intermèdies a l'idioma de destí triat. Diveros treballs de recerca han conclòs que la qualitat de la segmentació és un factor molt important en la qualitat del sistema MT, per la qual cosa el desenvolupament d'un segmentador efectiu és un pas fonamental en el procés de ST contínua. Aquest segmentador s'ha integrat en la solució per etapes, i aquestes s'optimitzen de manera conjunta per a aconseguir l'equilibri òptim entre qualitat i latència. La ST contínua té unes restriccions de latència molt més estrictes que la ST en directe, ja que el nivell desitjat de latència ha de mantindre's durant tot el procés de traducció. Per tant, és crucial ser capaç de mesurar de manera precisa aquesta latència, però les mètriques estàndard de ST en directe no s'adapten bé a aquesta tasca. A conseqüència d'això, es proposen nous mètodes per a l'avaluació de ST contínua, que garanteixen uns resultats precisos alhora que interpretables. Finalment, es presenta un nou mètode per a millorar la qualitat de la traducció contínua mitjançant l'ús d'informació contextual. Mentre que els sistemes tradicionals de ST en directe tradueixen àudios de manera aïllada, existeix abundant informació contextual que està disponible per a millorar els sistemes de ST contínua. La nostra proposta introdueix el concepte d'història contínua, que consisteix en l'emmagatzematge de la informació més recent del procés de traducció, que s'utilitza més endavant pel model per a millorar la qualitat de la traducció., [EN] Thanks to significant advances in Deep Learning, Speech Translation (ST) has become a mature field that enables the use of ST technology in production-ready solutions. Due to the ever-increasing hours of audio-visual content produced each year, as well as higher awareness of the importance of media accessibility, ST is poised to become a key element for the production of entertainment and educational media. Although significant advances have been made in ST, most research has focused on the offline scenario, where the entire input audio is available. In contrast, online ST remains an under-researched topic. A special case of online ST, streaming ST, translates an unbounded input stream in a real-time fashion under strict latency constraints. This is a much more realistic problem that needs to be solved in order to apply ST to a variety of real-life tasks. The focus of this thesis is on researching and developing key techniques necessary for a successful streaming ST solution. First, in order to enable ST system development and evaluation, a new multilingual ST dataset is collected, which significantly expands the amount of hours available for ST. Then, a streaming-ready segmenter component is developed to segment the intermediate transcriptions of our proposed cascade solution, which consists in an Automatic Speech Recognition (ASR) system that transcribes the audio, followed by a Machine Translation (MT) system that translates the intermediate transcriptions into the desired language. Research has shown that segmentation quality plays a significant role in downstream MT performance, so the development of an effective streaming segmenter is a critical step in the streaming ST process. This segmenter is then integrated and the components of the cascade are jointly optimized to achieve an appropriate quality-latency trade-off. Streaming ST has much more strict latency constraints than standard online ST, as the desired latency level must be maintained during the whole translation process. Therefore, it is crucial to be able to accurately measure this latency, but the standard online ST metrics are not well suited for this task. As a consequence, new evaluation methods are proposed for streaming ST evaluation, which ensure realistic, yet interpretable results. Lastly, a novel method is presented for improving translation quality through the use of contextual information. Whereas standard online ST systems translate audios in isolation, there is a wealth of contextual information available for improving streaming ST systems. Our approach introduces the concept of streaming history by storing the most recent information of the translation process, which is then used by the model in order to improve translation quality., The research leading to these results has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreements no. 761758 (X5Gon) and 952215 (TAILOR), and Erasmus+ Educa- tion programme under grant agreement no. 20-226-093604-SCH (EXPERT); the Government of Spain’s grant RTI2018-094879-B-I00 (Multisub) funded by MCIN/AEI/10.13039/501100011033 & “ERDF A way of making Europe”, and FPU scholarships FPU18/04135; and the Generalitat Valenciana’s research project Classroom Activity Recognition (ref. PROMETEO/2019/111) and predoctoral research scholarship ACIF/2017/055.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Gibberellins regulate ovule number through a DELLA-CUC2 complex in Arabidopsis

  • Barro-Trastoy, Daniela
  • Gómez, María D.
  • Blanco-Touriñán, Noel|||0000-0003-4610-6110
  • Tornero Feliciano, Pablo|||0000-0001-9755-7726
  • PEREZ AMADOR, MIGUEL ANGEL|||0000-0003-4518-3544
[EN] Ovule development is a key process for plant reproduction, helping to ensure correct seed production. Several molecular factors and plant hormones such as gibberellins are involved in ovule initiation and development. Gibberellins control ovule development by the destabilization of DELLA proteins, whereas DELLA activity has been shown to act as a positive factor for ovule primordia emergence. But the molecular mechanism by which DELLA acts in ovule primordia initiation remained unknown. In this study we report that DELLA proteins participate in ovule initiation by the formation of a protein complex with the CUC2 transcription factor. The DELLA protein GAI requires CUC2 to promote ovule primordia formation, through the direct GAI-CUC2 interaction in placental cells that would determine the boundary regions between ovules during pistil development. Analysis of GAI-CUC2 interaction and co-localization in the placenta supports this hypothesis. Moreover, molecular analysis identified a subset of the loci for which the GAI protein may act as a transcriptional co-regulator in a CUC2-dependent manner. The DELLA-CUC2 complex is a component of the gene regulatory network controlling ovule primordia initiation in Arabidopsis., We wish to thank Dr. N. Arnaud (INRAE-Versailles, France) for the pCUC1:CUC1-GFP and pCUC2:CUC2-VENUS lines, Dr. D. Alabadi (IBMCP, Valencia, Spain) for the 35S:YFP-M5GAI line and GAI deletions in pDEST32, and Dr. S. Prat (CNB-Madrid, Spain) for the M5-DELLA clones in pGBKT7. We also thank Ms. C. Fuster for her excellent technical assistance and the IBMCP Bioinformatics Core Service for helping in the data processing. This work was supported by grants from the Spanish Ministry of Economy and Competitiveness-FEDER (BIO2017-83138R) and Spanish Ministry of Science and Innovation-AEI (PID2020-113920RB-I00) to MAP-A; DB-T was the recipient of a pre-doctoral fellowship from the Spanish Ministry of Universities (FPU18/00331).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Choking dynamic of highly swirled flow in variable nozzle radial turbines

  • Tiseira, Andrés-Omar|||0000-0001-9472-2386
  • Dolz, Vicente|||0000-0003-1511-6957
  • Echavarria-Olaya, Juan David|||0000-0002-9611-0751
  • Inhestern, Lukas Benjamin
[EN] This paper presents the results of a computational investigation of the aerodynamic choking mechanism in a variable geometry turbine, which is widely used in automotive turbocharging. RANS and URANS numerical simulations were carried out for two stator vane positions, 10% and 30% opening at different speeds and several other operating conditions to observe the establishment of choked flow and rotorstator interactions. When the stator vanes are at a closed position and high-pressure ratio, a shock wave is developed on the suction side of the stator vane; moreover, the effective area extends toward the rotor inlet. The shock losses of a fluid particle upstream of the rotor are related to the number of shocks that the particle goes through. The pressure losses are high close to the stator vanes and start to decrease toward the center of the vaneless space until they start to increase close to the rotor. The interaction between the rotor and stator creates shocks waves with an intensity depending on the rotor's leading edge position and the rotational speed. The pressure profile of the rotor blade under this circumstance is also affected, especially at high rotational speeds, when important load fluctuations may affect the integrity of the blades., The work has been partially supported by the Subprograma de Formación de Profesorado Universitario (FPU). Ministerio de Universidades. FPU18/02628 and by the FPI Subprograma. Universitat Politècnica de València. PAID-10-18
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Research software Software (Software)

Considering Population Variability of Electrophysiological Models Improves the In Silico Assessment of Drug-Induced Torsadogenic Risk

  • Llopis Lorente, Jordi
  • Trenor Gomis, Beatriz Ana|||0000-0001-9166-6112
  • Saiz Rodríguez, Francisco Javier|||0000-0002-9850-0825
This repository contains the parameter sets of the population of TorORd models and the the population of ORdmD models, the ORdmD CellML file and MALTAB code used in Llopis-Lorente, J., Trenor, B., Saiz, J. (2022). Considering Population Variability of Electrophysiological Models Improves the In Silico Assessment of Drug-Induced Torsadogenic Risk
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

FungalBraid 2.0: expanding the synthetic biology toolbox for the biotechnological exploitation of filamentous fungi

  • Moreno-Giménez, Elena
  • Gandía, Mónica
  • Sáez, Zara
  • Manzanares, Paloma
  • Marcos, Jose F.
  • Garrigues, Sandra
  • Yenush, Lynne|||0000-0001-8589-7002
  • Orzáez Calatayud, Diego Vicente
[EN] Fungal synthetic biology is a rapidly expanding field that aims to optimize the biotechnological exploitation of fungi through the generation of standard, readyto-use genetic elements, and universal syntax and rules for contributory use by the fungal research community. Recently, an increasing number of synthetic biology toolkits have been developed and applied to filamentous fungi, which highlights the relevance of these organisms in the biotechnology field. The FungalBraid (FB) modular cloning platform enables interchangeability of DNA parts with the GoldenBraid (GB) platform, which is designed for plants, and other systems that are compatible with the standard Golden Gate cloning and syntax, and uses binary pCAMBIA-derived vectors to allow Agrobacterium tumefaciensmediated transformation of a wide range of fungal species. In this study, we have expanded the original FB catalog by adding 27 new DNA parts that were functionally validated in vivo. Among these are the resistance selection markers for the antibiotics phleomycin and terbinafine, as well as the uridine-auxotrophic marker pyr4. We also used a normalized luciferase reporter system to validate several promoters, such as PpkiA,P7760,Pef1¿, and PafpB constitutive promoters, and PglaA,PamyB, and PxlnA inducible promoters. Additionally, the recently developed dCas9-regulated GB_SynP synthetic promoter collection for orthogonal CRISPR activation (CRISPRa) in plants has been adapted in fungi through the FB system. In general, the expansion of the FB catalog is of great interest to the scientific community since it increases the number of possible modular and interchangeable DNA assemblies, exponentially increasing the possibilities of studying, developing, and exploiting filamentous fungi., This work was supported by PROMETEO/2018/066 from "Conselleria d'Educacio" (Generalitat Valenciana, Comunitat Valenciana, Spain), grant PID2021-125858OB-100, and the Severo Ochoa Excellence Program CEX 2021-001189-S funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe." EM-G was the recipient of a predoctoral grant FPU18/02019 funded by MCIN/AEI/10.13039/501100011033 and by "ESF Investing in your future." SG holds a Juan de la Cierva Incorporacion grant (IJC 2020-042749-I) funded by MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Newly Developed MAGIC Population Allows Identification of Strong Associations and Candidate Genes for Anthocyanin Pigmentation in Eggplant

  • Mangino, Giulio
  • Pook, Torsten
  • Arrones-Olmo, Andrea|||0000-0003-3926-0291
  • Plazas Ávila, María de la O|||0000-0001-8090-7312
  • Prohens Tomás, Jaime|||0000-0003-1181-9065
  • Gramazio, Pietro|||0000-0003-2226-7999
  • Vilanova Navarro, Santiago|||0000-0003-4939-9713
[EN] Multi-parent advanced generation inter-cross (MAGIC) populations facilitate the genetic dissection of complex quantitative traits in plants and are valuable breeding materials. We report the development of the first eggplant MAGIC population (S3 Magic EGGplant InCanum, S3MEGGIC; 8-way), constituted by the 420 S3 individuals developed from the intercrossing of seven cultivated eggplant (Solanum melongena) and one wild relative (S. incanum) parents. The S3MEGGIC recombinant population was genotyped with the eggplant 5k probes SPET platform and phenotyped for anthocyanin presence in vegetative plant tissues (PA) and fruit epidermis (FA), and for the light-insensitive anthocyanic pigmentation under the calyx (PUC). The 7,724 filtered high-confidence single-nucleotide polymorphisms (SNPs) confirmed a low residual heterozygosity (6.87%), a lack of genetic structure in the S3MEGGIC population, and no differentiation among subpopulations carrying a cultivated or wild cytoplasm. Inference of haplotype blocks of the nuclear genome revealed an unbalanced representation of the founder genomes, suggesting a cryptic selection in favour or against specific parental genomes. Genome-wide association study (GWAS) analysis for PA, FA, and PUC detected strong associations with two myeloblastosis (MYB) genes similar to MYB113 involved in the anthocyanin biosynthesis pathway, and with a COP1 gene which encodes for a photo-regulatory protein and may be responsible for the PUC trait. Evidence was found of a duplication of an ancestral MYB113 gene with a translocation from chromosome 10 to chromosome 1 compared with the tomato genome. Parental genotypes for the three genes were in agreement with the identification of the candidate genes performed in the S3MEGGIC population. Our new eggplant MAGIC population is the largest recombinant population in eggplant and is a powerful tool for eggplant genetics and breeding studies., This work was supported by the Ministerio de Ciencia, Innovacion y Universidades, Agencia Estatal de Investigacion and Fondo Europeo de Desarrollo Regional (grant RTI2018-094592-B-I00 from MCIU/AEI/FEDER, UE) and European Unions Horizon, 2020 Research and Innovation Programme under grant agreement no. 677379 (G2P-SOL project: Linking genetic resources, genomes and phenotypes of Solanaceous crops). AA is grateful to Spanish Ministerio de Ciencia, Innovacion y Universidades for a pre-doctoral (FPU18/01742) contract. MP is grateful to Spanish Ministerio de Ciencia e Innovacion for a post-doctoral grant (IJC2019-039091-I/AEI/10.13039/501100011033). PG is grateful to Spanish Ministerio de Ciencia e Innovacion for a post-doctoral grant (FJC2019-038921-I/AEI/10.13039/501100011033). Funding for open access charge: Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of long-term ageing by temperatures on mechanical behaviour of Fibre Reinforced Concretes

  • Caballero-Jorna, Marta
  • Roig-Flores, Marta
  • Serna Ros, Pedro|||0000-0001-8754-1165
[EN] This study examines the effect of ageing by operating temperatures on the mechanical properties of Fibre Reinforced Concretes (FRCs) when exposed during long-term periods (180 days of conditioning). There is little information in the literature about long-term mechanical performance of steel (SFRC), and especially, macro synthetic fibre reinforced concretes (MSFRCs), which may be affected due to this exposure. One type of steel fibre and three types of macro synthetic fibres were selected to reinforce an ordinary concrete in this work. An extensive experimental campaign (with a total of 260 specimens) which includes compression and flexural tests performed at temperatures, was carried out to investigate the influence of a range of temperature from-15 to 60 degrees C. Additionally, the interaction between cracking conditions (up to 0.5 mm) and temperature was analyzed for both type of FRC beams. The compression results obtained show higher strengths at low temperatures (25-30 %) and a decrease on the strengths at higher temperatures (15-20 %), but these variations are not crucial on the ageing of FRCs. Similar effects were detected for the strength at the peak load, and to a minor extent, for the residual flexural strengths, for all the FRCs. Specimens with a pre-existing crack (cracked condition) exposed to the studied temperature had the same results as uncracked specimens. Thus, both FRCs have the potential to obtain appropriate results for structural applications when exposed to the studied temperatures., The authors thank to the Spanish Ministry of Science, Innovation and Universities for the funding received under the FPU Program [grant number FPU18/06145].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Microporous 3D graphitic carbons obtained by soft templating as carbocatalysts for aerobic oxidation

  • Garcia-Mulero, Ana
  • Dhakshinamoorthy, Amarajothi
  • Garcia-Baldovi, Hermenegildo
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Herein it is reported that chitosan, a natural filmogenic biopolymer, can undergo soft-templating in liquid phase under hydrothermal conditions by two typical structure directing agents, namely hexamethyleneimine (HMI) and tetraethylammonium (TEA) employed in the synthesis of zeolites MCM-22 and Beta, respectively. After templation, pyrolysis of chitosan under inert atmosphere renders 3D graphitic sponges with defined ultra- and microporous channels. These porous structured graphitic carbons exhibit much enhanced activity as metal-free catalyst in the aerobic oxidation of benzylamine compared to other analogous 2D graphene oxide and reduced graphene oxide, as well as large area active carbons. It is proposed that this superior activity of these 3D structured microporous carbons derives from confinement effects activating molecular oxygen and benzylamine within the micropores. Quenching studies indicate that the reactive oxygen species are mostly adsorbed within the pores of the 3D graphitic carbons, Financial support by the Spanish Ministry of Science and Innovation (RTI2018-098237-CO2-R1 and Severo Ochoa) and Generalitat Valenciana (Prometeo 2017/083) is gratefully acknowledged. H.G.B. and A.P. thank the Generalitat Valenciana and Spanish Ministry of Science and Innovation for their research associate contracts. A.G.M. thanks the Spanish Ministry of Science and Innovation for the scholarship FPU18/02706. A.D. thanks University Grants Commission for awarding Assistant Professorship under the Faculty recharge program
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Design of New Synthetic Genetic Tools for Plant Biotechnology

  • Calvache Román, Camilo Alberto
[ES] La Biología Sintética aplica principios de ingeniería, como la modularidad y la estandarización, a los sistemas biológicos, y su extensión a las plantas está permitiendo nuevos enfoques para la mejora de cultivos. A medida que avanza la Biología Sintética Vegetal, existe una necesidad creciente de módulos reguladores fiables y predecibles, así como de sistemas de medida capaces de respaldar el diseño racional de circuitos genéticos cada vez más complejos. El objetivo general de esta Tesis fue desarrollar, adaptar y evaluar interruptores regulatorios y reporteros autónomos adecuados para sistemas vegetales, con el fin de mejorar el control postraduccional, la caracterización cuantitativa y la monitorización biológica en tiempo real. El trabajo presentado en el Capítulo 1 se centra en la regulación postraduccional mediante proteínas anti-CRISPR (Acrs). Dos inhibidores de origen fágico, AcrIIA4 y AcrVA1, fueron adaptados para su expresión en plantas y caracterizados como represores de los sistemas CRISPR/Cas9 y Cas12a. Su capacidad para suprimir la edición génica y la activación transcripcional se evaluó en Nicotiana benthamiana, y su uso como componentes reguladores modulables se exploró mediante experimentos de dosis y combinando AcrIIA4 con un degrón inducible por auxina. Estos resultados demostraron que los Acrs pueden funcionar como represores compactos y de acción rápida para circuitos basados en CRISPR, al tiempo que revelaron limitaciones relacionadas con la reversibilidad y la ocupación del ADN diana. El Capítulo 2 aborda la necesidad de reporteros cuantitativos y libres de sustrato para la prototipación de circuitos. Con este fin, la Ruta de Bioluminiscencia Fúngica (FBP) de Neonothopanus nambi fue rediseñada para crear un sistema luminiscente autónomo adecuado para ensayos en plantas. Al reorganizar la estequiometría de la ruta y seleccionar a la Hispidina Sintasa (HISPS) como punto de entrada transcripcional, se desarrolló un reportero lineal y estable -NeoLuc/eGFP- que fue posteriormente validado. Su rendimiento se evaluó en una amplia gama de circuitos sintéticos, incluidos promotores sensibles a fitohormonas, módulos optogenéticos y un interruptor inducible por cobre, estableciendo su utilidad para la caracterización de mediana escala en discos foliares. Sobre la base de estas herramientas, el Capítulo 3 explora el diseño de un biosensor basado en BRET para la detección de virus vegetales. Combinando la luciferasa LUZ con proteínas fluorescentes e insertando sitios de corte de proteasas de potyvirus en los enlazadores interdominio, se crearon constructos capaces de cambiar el color de la luminiscencia en respuesta a la actividad proteasa. La optimización de la orientación y de los enlazadores mostró que las fusiones C-terminales y ciertos enlazadores flexibles producían la transferencia de energía más eficiente. Al ser probados con las proteasas del Virus del Mosaico del Tabaco (TEV) y del Virus del Moteado de la Vena del Tabaco (TVMV), los sensores generaron cambios de emisión claramente diferenciables, permitiendo una detección autónoma y no invasiva de la infección viral en planta. En conjunto, esta Tesis demuestra el desarrollo de módulos de control modulares y sistemas de reporte autónomos que refuerzan el flujo de Diseño-Construcción-Prueba-Aprendizaje (DCPA) en Biología Sintética Vegetal. Los reguladores anti-CRISPR, la ruta de bioluminiscencia fúngica rediseñada y los sensores diagnósticos basados en BRET contribuyen colectivamente a mejorar la precisión, la modularidad y la aplicabilidad de los circuitos genéticos diseñados en plantas., This work was supported by grant PID2019-108203RB-I00 Plan Nacional I+D from the Ministerio de Ciencia e Innovación (Spain) through the Agencia Estatal de Investigación (co-financed by the European Regional Development Fund). C.C., M.V.-V. and E.M.-G are the recipients of fellowships FPI-UPV (PAID-01-20) from Universitat Politecnica de Valencia, APOSTD/2020/096 from the Generalitat Valenciana and FPU18/02019 from the Spanish Ministry of Science, Innovation and Universities, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Conventional and new genetic resources for an eggplant breeding revolution

  • Gramazio, Pietro|||0000-0003-2226-7999
  • Arrones-Olmo, Andrea|||0000-0003-3926-0291
  • Villanueva-Párraga, Gloria|||0000-0002-1475-2882
  • Plazas Ávila, María de la O|||0000-0001-8090-7312
  • Vilanova Navarro, Santiago|||0000-0003-4939-9713
  • Prohens Tomás, Jaime|||0000-0003-1181-9065
  • Alonso-Martín, David
  • Toppino, Laura
  • Barchi, Lorenzo
  • Portis, Ezio
  • Ferrante, Paola
  • Lanteri, Sergio
  • Rotino, Giuseppe Leonardo
  • Giuliano, Giovanni
[EN] Eggplant (Solanum melongena) is a major vegetable crop with great potential for genetic improvement owing to its large and mostly untapped genetic diversity. It is closely related to over 500 species of Solanum subgenus Leptostemonum that belong to its primary, secondary, and tertiary genepools and exhibit a wide range of characteristics useful for eggplant breeding, including traits adaptive to climate change. Germplasm banks worldwide hold more than 19 000 accessions of eggplant and related species, most of which have yet to be evaluated. Nonetheless, eggplant breeding using the cultivated S. melongena genepool has yielded significantly improved varieties. To overcome current breeding challenges and for adaptation to climate change, a qualitative leap forward in eggplant breeding is necessary. The initial findings from introgression breeding in eggplant indicate that unleashing the diversity present in its relatives can greatly contribute to eggplant breeding. The recent creation of new genetic resources such as mutant libraries, core collections, recombinant inbred lines, and sets of introgression lines will be another crucial element and will require the support of new genomics tools and biotechnological developments. The systematic utilization of eggplant genetic resources supported by international initiatives will be critical for a much-needed eggplant breeding revolution to address the challenges posed by climate change., This work was supported by the following grants: CIPROM/2021/020 from Conselleria d'Innovació, Universitats, Ciència i Societat Digital (Generalitat Valenciana, Spain); PID2021-128148OB-I00 funded by MCIN/AEI/10.13039/501100011033/ and by ERDF A way of making Europe ; PDC2022-133513-I00 funded by MCIN/AEI/10.13039/501100011033/, and by European Union NextGenerationEU/PRTR; Grant Agreement No. 677379 (G2PSOL project: Linking genetic resources, genomes and phenotypes of solanaceous crops) from European Union's Horizon 2020 Research and Innovation Programme; Grant Agreement No. 101094738 (PROGRACE project: Promoting a Plant Genetic Resource Community for Europe) from the European Union's Horizon Europe programme. PG is grateful to Spanish Ministerio de Ciencia e Innovación for a post-doctoral grant (RYC2021-031999-I) funded by MCIN/AEI/10.13039/501100011033 and the European Union through NextGenerationEU/PRTR. AA is grateful to Spanish Ministerio de Ciencia, Innovación y Universidades for a pre-doctoral (FPU18/01742) contract. GV is grateful to Spanish Ministerio de Ciencia e Innovación for a pre-doctoral grant (PRE2019- 103375) funded by MCIN/AEI/10.13039/501100011033.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Game-Theory-Based Multi-Objective Optimization for Enhancing Environmental and Social Life Cycle Assessment in Steel Concrete Composite Bridges

  • Martínez-Muñoz, D.|||0000-0002-6906-3830
  • Martí Albiñana, José Vicente|||0000-0002-2435-4095
  • Yepes, V.|||0000-0001-5488-6001
[EN] The design of bridges must balance sustainability and construction simplicity. A game-theory-based optimization method was applied in this research to find a sustainable steel¿concrete composite bridge design. The sustainability was evaluated through cost and environmental and social impact using the Life Cycle Assessment method. The optimization process considered four criteria simultaneously, using a discrete version of the SCA algorithm and a transfer function for discretization. The preferred solutions were selected using the Minkowski distances approach. Results showed a decrease in slab reinforcement and an increase in the amount of steel in the cross-section, leading to only an 8.2¿ increase in cost compared to similar studies. Regarding the cross-section, the geometry obtained considers cells in the upper and lower parts of the webs to improve the bending resistance. The proposed method allows for the simultaneous optimization of multiple criteria and provides a sustainable yet simple bridge design solution., The authors gratefully acknowledge the funding received from the following research projects: Grant PID2023-150003OB-I00, funded by MICIU/AEI/10.13039/501100011033 and by ERDF/EU , and Grant FPU-18/01592, funded by MCIN/AEI/10.13039/501100011033 and by ESF invests in your future .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Development of Decellularized Oviductal Hydrogels as a Support for Rabbit Embryo Culture

  • Francés-Herrero, Emilio
  • De Miguel-Gómez, Lucía
  • López-Martínez, Sara
  • Campo, Hannes
  • Garcia-Dominguez, Ximo
  • Diretto, Gianfranco
  • Faus, Amparo
  • Cervelló, Irene
  • Vicente Antón, José Salvador|||0000-0003-0481-3802
  • Marco-Jiménez, Francisco|||0000-0002-5226-4118
[EN] The oviducts (fallopian tubes in mammals) function as the site of fertilization and provide necessary support for early embryonic development, mainly via embryonic exposure to the tubal microenvironment. The main objective of this study was to create an oviduct-specific extracellular matrix (oviECM) hydrogel rich in bioactive components that mimics the native environment, thus optimizing the developmental trajectories of cultured embryos. Rabbit oviducts were decellularized through SDS treatment and enzymatic digestion, and the acellular tissue was converted into oviductal pre-gel extracellular matrix (ECM) solutions. Incubation of these solutions at 37 degrees C resulted in stable hydrogels with a fibrous structure based on scanning electron microscopy. Histological staining, DNA quantification and colorimetric assays confirmed that the decellularized tissue and hydrogels contained no cellular or nuclear components but retained important components of the ECM, e.g. hyaluronic acid, glycoproteins and collagens. To evaluate the ability of oviECM hydrogels to maintain early embryonic development, two-cell rabbit embryos were cultured on oviECM-coated surfaces and compared to those cultured with standard techniques. Embryo development was similar in both conditions, with 95.9% and 98% of the embryos reaching the late morula/early blastocyst stage by 48 h under standard culture and oviECM conditions, respectively. Metabolomic analysis of culture media in the presence or absence of embryos, however, revealed that the oviECM coating may include signalling molecules and release compounds beneficial to embryo metabolism., This study was supported by Instituto de Salud Carlos III (PI17/01039-CP19/00149 [Irene Cervello]), Ministry of Economy, Industry and Competitiveness (AGL2017-85162-C2-1-R [Francisco Marco], BES-2015-072429 [Ximo Garcia]), Ministry of Science, Innovation and Universities (FPU18/06327 [Emilio Frances]) and Generalitat Valenciana (PROMETEO/2018/137 [Irene Cervello, Lucia de Miguel], ACIF/2017/118 [Sara Lopez]). The proteomics laboratory is a member of ProteoRed, PRB3, and is supported by grant PT17/0019 of the State Plan I+D+i 2013-2016, funded by Instituto de Salud Carlos III and European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Studies on the biological role of the antifungal protein PeAfpA from Penicillium expansum by functional gene characterization and transcriptomic profiling

  • Ropero-Pérez, Carolina
  • Moreno-Giménez, Elena
  • Marcos, Jose F.
  • Manzanares, Paloma
  • Gandía, Mónica
[EN] Antifungal proteins (AFPs) from filamentous fungi have enormous potential as novel biomolecules for the control of fungal diseases. However, little is known about the biological roles of AFPs beyond their antifungal action. Penicillium expansum encodes three phylogenetically different AFPs (PeAfpA, PeAfpB and PeAfpC) with diverse profiles of antifungal activity. PeAfpA stands out as a highly active AFP that is naturally produced at high yields. Here, we provide new data about the function of PeAfpA in P . expansum through phenotypical characterization and transcriptomic studies of null mutants of the corresponding afpA gene. Mutation of afpA did not affect axenic growth, conidiation, virulence, stress responses or sensitivity towards P . expansum AFPs. However, RNA sequencing evidenced a massive transcriptomic change linked to the onset of PeAfpA production. We identified two large gene expression clusters putatively involved in PeAfpA function, which correspond to genes induced or repressed with the production of PeAfpA. Functional enrichment analysis unveiled significant changes in genes related to fungal cell wall remodeling, mobilization of carbohydrates and plasma membrane transporters. This study also shows a putative co-regulation between the three afp genes. Overall, our transcriptomic analyses provide valuable insights for further understanding the biological functions of AFPs., This work was supported by grant PID2021-125858OB-100 and the Severo Ochoa Excellence Program CEX2021-001189-S, funded by MCIN/AEI/10.13039/501100011033 and by "ERDF, a way of making Europe." C.R.P. and EM -G were recipients of predoctoral grants ACIF/2021/364 funded by Conselleria d'Educaci o (Generalitat Valenciana, Comunitat Valenciana, Spain) and FPU18/02019 funded by MCIN/AEI/10.13039/501100011033 and by "ESF Investing in your future", respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Approximation to the Use of Half-Timbered Walls with Earth Infill in Spanish Traditional Archtiecture

  • Hueto-Escobar, Alicia|||0000-0003-4628-6545
  • Vegas López-Manzanares, Fernando|||0000-0003-0315-6839
  • Manzano-Fernández, Sergio|||0000-0001-7936-1324
  • Diodato, Maria
[EN] The term "half-timbered walls with earth infill" refers to a wide number of techniques in which structural wooden elements are combined with enclosures made of earth. The use of these constructive systems dates back to prehistoric times and their evolution has differed based on the physical, social and cultural conditions of each place. Therefore, the objective of this paper is to define the concept of half-timbered walls with earth infill in the Spanish context and to understand the geographical, urban, architectural and constructive reasons that have favoured or hindered its use in traditional architecture. The methodology used is based on the quantitative and qualitative analysis of the largest possible number of case studies. This allows a database to be set up for the purposes of performing global analysis and drawing objective and statistically valid conclusions. This information is managed using a study sheet with information ranging from general aspects of buildings with the presence of these techniques to detailed features of half-timbered walls. The data and conclusions presented in this paper focus on these half-timbered walls, including information on the geographical distribution of these techniques, the characteristics of the buildings in which they are used, the combination of mixed walls with other construction techniques, and the state of conservation and transformation of the buildings in which they are used. It has been established that these techniques are common in mountainous landscapes, where there is optimal woodland for construction, and in urban environments, where they are presented as optimum techniques to maximize the profitability of the buildable surface., This study is part of the research project La arquitectura de tierra en la Península Ibérica: Estudio de los riesgos naturales, sociales y antrópicos y estrategias de intervención e incremento de la resiliencia Risk-Terra (ref. RTI2018- 095302-B-I00; main researchers: Camilla Mileto y Fernando Vegas), funded by the Spanish Ministry of Science, Innovation and University. The identification and location of many case studies has been possible thanks to the earlier research project La restauración y rehabilitación de arquitectura tradicional de tierra en la Península Ibérica. Líneas guía y herramientas para una intervención sostenible SOStierra (ref. BIA 2014-55924- R, main researchers: Camilla Mileto y Fernando Vegas) funded by the Spanish Ministry of Economy and Competitiveness. The authors wish to thank all the researchers who took part in the process of locating, identifying, and documenting a large number of buildings with earth construction techniques. This research has been developed within a doctoral thesis funded by the Spanish Ministry of Science, Innovation and University (Ref. FPU18/01596).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Bi-Functional Topospecific Nanoparticles to Promote Immune-Tumor Cell Engagement as A New Immunotherapeutic Strategy

  • Ortuño-Bernal, Alba Amparo
  • Clara-Trujillo, Sandra|||0000-0002-6455-2993
  • Hicke-García, Francisco Javier|||0000-0002-8419-0467
  • Escudero-Noguera, Andrea|||0000-0003-2670-6127
  • García-Fernández, Alba|||0000-0002-8416-1674
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
  • Lucena-Sánchez, Elena
  • Pradana-López, Sandra
  • Jiménez-Alduán, Nelia
  • Diez-Sánchez, Paula
[EN] Cancer immunotherapy has emerged as a promising alternative approach, enabling the body's immune system to fight cancer. Cytotoxic T cells play a pivotal role in recognizing and eliminating tumor cells, and their effectiveness relies on establishing a physical interaction and efficient communication with cancer cells. However, this communication is often disrupted by immune escape mechanisms, allowing cancer progression. A versatile nanoplatform is developed to restore cellular connection using Janus mesoporous silica-Au nanoparticle (J-pHLIP-PD1), including specific binding sites on opposite faces for simultaneous binding to cancer cells and immune cells. The two differential surfaces on the nanoparticle allow orthogonal functionalization with the anti-PD-1 antibody that interacts with the PD-1 receptor in cytotoxic T cells on the gold face and the pH Low Insertion Peptide (pHLIP), which undergoes specific insertion into the tumor cell membrane on the silica face. J-pHLIP-PD1 nanoparticles effectively bind the surface of tumor cells and capture T cells, facilitating the formation of immune synapse-like structures that lead to reduced cancer cell viability in vitro, associated with immunogenic cell death signatures. The therapeutic potential of J-pHLIP-PD1 is also demonstrated in an in vivo metastatic melanoma model, where treatment with J-pHLIP-PD1 produces a significant decrease in metastatic burden and increases T cell presence. The Janus nanosystem represents an attractive platform that expands the toolbox of immune-engaging strategies, offering a flexible alternative to conventional immunotherapies that link immune and tumor cells, restoring cell-cell communication for cancer elimination., A. Ortuno-Bernal, S. Clara-Trujillo and E. Lucena-Sanchez have con-tributed equally to this work. This work was supported by the European Research Council (ERC) via Advanced Grant (101052997, EDI-SON). The authors thank the Spanish Government, project PID2021-126304OB-C41 by MCIN/ AEI /10.13039/501100011033/ and by European Regional Development Fund-A way of doing Europe. This studywas also supported by the Generalitat Valenciana (project PROMETEOCIPROM/2021/007). This study forms part of the Advanced Materials pro-gram (MFA/2022/049) and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana. This work was also supported by CIBER -Consorcio Centro deInvestigacion Biomedica en Red- (CB06/01/2012), Instituto de Salud Carlos III, Ministerio de Ciencia e Innovacion. A.G-F. thanks the financial support from FC AECC (IDEAS246782GARC). E.L.-S is grateful for herFPU fellowship funded by MINECO (FPU18/06539). F.J.H thanks MIUfor his FPU grant (FPU20/06021). A.O.B acknowledges support from apredoctoral fellowship funded by the Generalitat Valenciana (GVA, Grant No.CIACIF/2023/320). Samples included in this study were provided bythe Biobanco La Fe (B.0000723) and they were processed following stan-dard operating procedures with the appropriate approval of the Ethics andScientific Committees. Graphical images and schemes were created withBioRender.com.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Combining pharmacokinetic and electrophysiological models for early prediction of drug-induced arrhythmogenicity

  • Llopis-Lorente, Jordi
  • Baroudi, Samuel
  • Koloskoff, Kévin
  • Basset, Matthieu
  • Benito, Sylvain
  • Dayan, Frederic
  • Mora-Fenoll, María Teresa|||0000-0002-8069-2486
  • Romero Pérez, Lucia|||0000-0003-4605-8630
  • Saiz Rodríguez, Francisco Javier|||0000-0002-9850-0825
  • Trenor Gomis, Beatriz Ana|||0000-0001-9166-6112
[EN] Background and Objective: In silico methods are gaining attention for predicting drug-induced Torsade de Pointes (TdP) in different stages of drug development. However, many computational models tended not to account for inter-individual response variability due to demographic covariates, such as sex, or physiologic covariates, such as renal function, which may be crucial when predicting TdP. This study aims to compare the effects of drugs in male and female populations with normal and impaired renal function using in silico methods.Methods: Pharmacokinetic models considering sex and renal function as covariates were implemented from data published in pharmacokinetic studies. Drug effects were simulated using an electrophysiologically calibrated population of cellular models of 300 males and 300 females. The population of models was built by modifying the endocardial action potential model published by O'Hara et al. (2011) according to the experimentally measured gene expression levels of 12 ion channels.Results: Fifteen pharmacokinetic models for CiPA drugs were implemented and validated in this study. Eight pharmacokinetic models included the effect of renal function and four the effect of sex. The mean difference in action potential duration (APD) between male and female populations was 24.9 ms (p<0.05). Our simulations indicated that women with impaired renal function were particularly susceptible to drug-induced arrhythmias, whereas healthy men were less prone to TdP. Differences between patient groups were more pronounced for high TdP-risk drugs. The proposed in silico tool also revealed that individuals with impaired renal function, electro-physiologically simulated with hyperkalemia (extracellular potassium concentration [K+](o) = 7 mM) exhibited less pronounced APD prolongation than individuals with normal potassium levels. The pharmacokinetic/electrophysiological framework was used to determine the maximum safe dose of dofetilide in different patient groups. As a proof of concept, 3D simulations were also run for dofetilide obtaining QT prolongation in accor-dance with previously reported clinical values.Conclusions: This study presents a novel methodology that combines pharmacokinetic and electrophysiological models to incorporate the effects of sex and renal function into in silico drug simulations and highlights their impact on TdP-risk assessment. Furthermore, it may also help inform maximum dose regimens that ensure TdP-related safety in a specific sub-population of patients., This project received funding from the European Union's Horizon 2020 Research and Innovation Program under grant agreement No. 101016496 (SimCardioTest) . This work was also partially supported by the Direccion General de Politica Cientifica de la Generalitat Valenciana (PROMETEO/2020/043) . The authors also thankfully acknowledge the computer resources at MareNostrum and the technical support provided by Barcelona Supercomputing Center (IM-2021-1-0001, IM-2021-1-0003, IM-2022-1-0002, IM-2023-1-0002) . JL is being funded by the Ministerio de Ciencia, Innovacion y Universidades for the Formacion de Profesorado Universitario (grant reference: FPU18/01659) . Funding for open access charge: Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Recycled versus non-recycled insulation alternatives: LCA analysis for different climatic conditions in Spain

  • Ata-Ali, N.
  • Penadés-Plà, V.
  • Martínez-Muñoz, D.|||0000-0002-6906-3830
  • Yepes, V.|||0000-0001-5488-6001
[EN] The construction sector represents more than 40% of energy consumption in the European Union, as well as one of the biggest causes of environmental impact. Therefore, this sector needs a great deal of intervention through policies that promote the energetic efficiency of the buildings. One of the most important structural components to reach this energetic efficiency is the facades. In this work, the facade ventilated is chosen due to its better thermal insulation behaviour. The environmental impact of the facade ventilated depends on the thermal insulation material. The goal of this paper is to evaluate the environmental impact of different ventilated facades according to their thermal insulation behavior. For this purpose, the life-cycle assessment is applied in ventilated facades with different materials in different locations. The materials studied are the rock wool, the natural cork and the recycled cork, and the locations considered are the different climatic areas of Spain. To reach a complete environmental assessment all the ventilated facades life-cycle is considered, from cradle to grave. To do this we use the Open LCA software with the Ecoinvent database with the ReCiPe method. The results show that the recycled cork is the thermal insulation with the lowest environmental impact regardless the location., The authors acknowledge the financial support of the Spanish Ministry of Economy and Business (Project: BIA2017-85098-R) and the Spanish Ministry of Science and Innovation (Project: PID2020-117056RB-I00), along with FEDER funding. In addition would also acknowledge the Spanish Ministry of Science, Innovation and Universities for David Martinez-Munoz University Teacher Training Grant (FPU-18/01592).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Methodological analysis of variable geometry turbine technology impact on the performance of highly downsized spark-ignition engines

  • Serrano, J.R.|||0000-0003-0692-3917
  • Piqueras, P.|||0000-0002-3767-0839
  • De La Morena, Joaquín|||0000-0003-0208-508X
  • Gómez-Vilanova, Alejandro|||0000-0002-6627-7075
  • Guilain, Stephane
[EN] New generation of spark ignition (SI) engines are expected to represent most of the future market share in a context of powertrain hybridization. Nevertheless, the current technology has still critical challenges in front to meet incoming CO2 and pollutant emissions standards, so new technologies are emerging to improve engine efficiency. In parallel to combustion concepts, a key required trend is downsizing based on high engine boosting. New turbocharger technologies, such as variable geometry turbines (VGT), become suitable for its application under the demanding operating conditions of SI engines. In this work, a methodology for the analysis of the VGT usage in comparison with traditional waste-gate (WG) turbine is presented. From experimental data obtained in engine test cell, a theoretical analysis aimed at ensuring full control on turbine boundary conditions, such as combustion variability, compressor map or engine calibration, was conducted. Taking advantage of highly validated and physically representative 1-D gas-dynamics and turbocharger models, the engine performance is discussed as a function of the turbine technology at full and partial load in a wide range of engine speed at the same time as the altitude impact is addressed. In all, it was found that VGT technology shows less limitations in extreme working conditions, such as low- and high-end torque regions, where the WG technology represents a limitation in terms of the maximum power output. Full load differences become more even more evident in altitude working conditions. When it comes to partial loads, differences in fuel consumption are minor, but potentially beneficial for VGTs., Alejandro Gomez Vilanova is partially supported through contract: Ayuda de Formacion de Profesorado Universitario (FPU18/04811). The authors wish to thank Vicente Esteve Ferrer for his invaluable work during the experimental campaign.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Muscle-Targeted Robotic Assistive Control Using Musculoskeletal Model of the Lower Limb

  • Escarabajal, Rafael J.
  • Zamora-Ortiz, Pau
  • Pulloquinga, José L.
  • Vallés Miquel, Marina|||0000-0002-6396-0098
  • Valera Fernández, Ángel|||0000-0001-6843-6394
[EN] Conventional assistive and rehabilitative robotic systems often overlook human biomechanics, particularly muscular forces, as they predominantly operate in joint or task space and focus on position and exchanged forces. Similarly, traditional manual rehabilitation techniques employed by physiotherapists struggle to obtain quantitative measurements and make precise modifications to key human variables, resulting in predominantly qualitative methods and outcomes. In response to these limitations, this article introduces an innovative assistive robot controller that operates in the muscular space, targeting specific muscles in the lower limb, and distinguishing itself from existing solutions that focus primarily on joint or task space. A key innovation of our approach is the real-time measurement of muscular forces during dynamic tasks, obtained from a calibrated musculoskeletal model. These measurements enable the establishment of a multistep closed-loop controller, with the outer loop precisely tracking the desired muscular forces. Implemented within a configurable viscous environment, the controller provides a natural response for the user. Experimental evaluations conducted using a parallel robot designed for rehabilitation demonstrate the controller¿s efficacy. Incorporating the outer loop reduced the median relative error of the tracked muscular force by nearly 80% and decreased the variability of this error by over 85% compared to a pure viscous environment defined as the baseline. These findings highlight the potential applications of this control framework in areas, such as assistive robotics and precision rehabilitation. By achieving objective measurement and control, the system may enhance rehabilitation outcomes, offering tailored exercises that match the individual needs, capabilities, and engagement of each patient., This work was supported in part by the Agencia Estatal de Investigacion (Ministerio de Ciencia e Innovacion, Spanish Government)/Fondos FEDER under Project PID2021-125694OB-I00; in part by the Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital (Generalitat Valenciana) under Project CIAICO/2023/074; and in part by the Ministerio de Universidades, Spanish Government, under Grant FPU18/05105.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Effect and Mechanisms of Action of Intestinal Bacteria and Bioactive Compounds on the Immune System and Metabolism in Obesity Models

  • Liébana García, Rebeca
[ES] La obesidad representa un importante reto para la salud pública debido a su elevada prevalencia y a las comorbilidades asociadas. Las dietas hipercalóricas activan el sistema inmunitario intestinal y alteran la microbiota intestinal causando daños metabólicos en el organismo. De hecho, la pérdida de homeostasis inmunológica intestinal se considera un evento que precede a la aparición de la inflamación sistémica de bajo grado asociada a la obesidad. Dado que la microbiota intestinal es un factor modificable, su modulación puede convertirse en una oportunidad para reducir el impacto de la obesidad. Por ello la identificación de los factores que participan en la respuesta inflamatoria a las dietas obesogénicas y la búsqueda de alternativas terapéuticas basadas en la microbiota constituyen una vía de investigación prometedora para combatir la obesidad. Esta Tesis Doctoral evalúa el potencial de nuevos probióticos y estrategias dietéticas para combatir la obesidad basadas en sus propiedades inmunomoduladoras. En el Primer Capítulo investigamos el potencial anti-obesogénico del propil propano tiosulfinato (PTS), un compuesto organosulfurado derivado de la especie Allium, en dos dosis diferentes (0,1 o 1 mg/kg/día) utilizando un modelo murino de obesidad inducida por la dieta (DIO). Nuestros hallazgos demostraron los efectos protectores de PTS frente a la obesidad, ya que su administración redujo el peso corporal y mejoró la homeostasis de glucosa. En el tejido adiposo y el hígado, PTS redujo la inflamación y el metabolismo lipídico aberrante causado por la dieta obesogénica. Además, PTS incrementó la actividad termogénica en el tejido adiposo marrón y reforzó la función barrera intestinal. En vista de los modestos cambios en el ecosistema microbiano intestinal, concluimos que estos efectos no eran mediados por la microbiota. En el Segundo Capítulo evaluamos el potencial anti-obesogénico y el mecanismo de acción de una nueva bacteria llamada Phascolarctobacterium faecium DSM 32890. Para ello, realizamos diferentes experimentos in vitro e in vivo usando diferentes cultivos celulares (macrófagos derivados de médula ósea y células linfoides innatas intestinales del grupo 1 (LC1s)) y modelos murinos DIO (ratones C57BL/6J y Rag1-/-). El tratamiento de ratones alimentados con una dieta hipercalórica con P. faecium incrementó la proporción de los macrófagos M2 en el intestino, lo que contrarrestó el aumento de ILC1s y, en última instancia, mitigó la intolerancia a la glucosa y el aumento de peso corporal, independientemente de la viabilidad de la bacteria. Además, P. faecium reforzó la función barrera intestinal y evitó la inflamación sistémica causada por la dieta hipercalórica. Estos beneficios metabólicos se mantuvieron en ausencia de inmunidad adaptativa, pero se perdieron cuando la bacteria se coadministró con un inhibidor (GW2580) de la polarización de macrófagos M2. Por último, realizamos un amplio estudio con datos metagenómicos de 6.361 personas que mostró una relación inversa entre P. faecium y la obesidad, independientemente de la nacionalidad, el sexo o la edad, lo que sugiere la asociación de esta bacteria con la salud metabólica. En el Tercer Capítulo, investigamos la implicación de las ILC1s intestinales en la progresión de la obesidad y las alteraciones metabólicas asociadas. Para ello, evaluamos longitudinalmente la respuesta de las ILC1s y las consecuencias su depleción de ILC1s en un modelo murino DIO. En el intestino, el bloqueo de ILC1s evitó el aumento de macrófagos M1 e ILC2s y promovió la activación de la vía ILC3-IL22, aumentando la producción de mucina, la expresión de péptidos antimicrobianos y el número de células neuroendocrinas. Además, el bloqueo de ILC1s restableció el perfil microbiano y el metaboloma, acercándose al perfil asociado con la salud metabólica. En última instancia, estas mejoras se asociaron con una mayor secreción de hormonas intestinales, y una reducción de la insulinemia y la adiposidad., [CA] L'obesitat és un repte per a la salut pública degut a la elevada prevalença i les comorbiditats. Les dietes hipercalòriques activen el sistema immunitari intestinal i alteren la microbiota intestinal causant danys metabòlics en l'organisme. De fet, la pèrdua d'homeòstasi immunològica a escala intestinal es considera un esdeveniment primerenc que precedeix l'aparició de la inflamació sistèmica de baix grau associada a l'obesitat. Atés que la microbiota intestinal és un factor modificable, la seua modulació pot convertir-se en una oportunitat per a reduir l'impacte de l'obesitat. Per això, la identificació dels factors que participen en la resposta inflamatòria a les dietes obesogèniques i la recerca d'alternatives terapèutiques basades en la microbiota son una via d'investigació prometedora per a combatre l'obesitat. Aquesta Tesi Doctoral avalua el potencial de nous probiòtics i estratègies dietètiques per a combatre l'obesitat basada en propietats immunomoduladores. En el Primer Capítol investiguem el potencial anti-obesogènic del propil propà tiosulfat (PTS), un compost organosulfurat derivat de l'espècie Allium, en dues dosis diferents (0,1 o 1 mg/kg/dia) utilitzant un model murí d'obesitat induïda per la dieta. Els resultats demostren els efectes protectors de PTS enfront a l'obesitat, ja que la seua administració va reduir el pes corporal i va millorar l'homeòstasi de glucosa. En el teixit adipós i el fetge, PTS va prevenir l'augment de la resposta inflamatòria i les alteracions del metabolisme lipídic causades per la dieta hipercalòrica. A més, PTS va incrementar l'activitat termogènica en el teixit adipós marró i millorà la funció barrera intestinal alterats per la dieta. Observàrem canvis modestos en la microbiota intestinal, concloent que els efectes no estan mediats de manera significativa per la microbiota. En el Segon Capítol avaluem el potencial anti-obesogènic i el mecanisme d'acció d'un nou bacteri Phascolarctobacterium faecium DSM 32890. Hem realitzat experiments in vitro i in vivo utilitzant diferents cultius cel·lulars (macròfags derivats de medul·la òssia i de cèl·lules limfoides innates intestinals del grup 1 (LC1s) i models murins d'obesitat induïda per la dieta (ratolins C57BL/6J, i Rag1-/- ). El tractament de ratolins alimentats amb una dieta hipercalòrica amb P. faecium incrementà la proporció dels macròfags M2 a l'intestí, contrarestant l'augment d'ILC1s i en última instància, mitigà la intolerància a la glucosa i l'augment del pes corporal, independentment de la viabilitat del bacteri. A més, P. faecium reforçà la funció bacterial intestinal i evità la inflamació sistèmica causada per la dieta hipercalòrica. Aquests beneficis metabòlics es mantenien en absència d'immunitat adaptativa, però es perderen quan el bacteri es coadministrà amb un inhibidor (GW2580) de la polarització de macròfags M2. Finalment, realitzàrem un ampli estudi amb dades metagenòmiques de 6.361 persones que mostrà una relació inversa entre P. faecium i l'obesitat, independentment de la nacionalitat, el sexe o l'edat, suggerint l'associació d'aquest bacteri amb la salut metabòlica. En el Tercer Capítol, investiguem la implicació de les ILC1s residents en l'intestí en la progressió de l'obesitat i les alteracions metabòliques associades. Evaluàrem longitudinalment la resposta de les ILC1s i les conseqüències de la depleció de ILC1s en un model murí d'obesitat. A l'intestí, el bloqueig de ILC1s va evitar l'augment de macròfags M1 i ILC2s, i va promoure l'activació de la via ILC3-IL22, augmentant la producció de mucina, l'expressió de pèptids antimicrobians i el nombre de cèl·lules neuroendocrines. El bloqueig de ILC1s va restablir la microbiota i el seu metaboloma, similar a l'estat saludable. Aquestes millores es van associar amb una major secreció d'hormones intestinals, i una reducció de la insulinèmia i l'adipositat., [EN] Obesity is a major public health challenge due to its high prevalence, and association with metabolic comorbidities. Hypercaloric diets are known to overactivate the intestinal immune system and disrupt the microbiome, ultimately causing detrimental metabolic effects. The loss of intestinal immune homeostasis is considered an early step preceding the development of systemic low-grade inflammation associated with obesity and metabolic complications. In this regard, extensive evidence supports that the gut microbiome may be modified favorable and, thus, help to ameliorate these conditions. Hence, identifying factors triggering the low-grade inflammation and microbiome-base solutions to reduce the obesity burden represent promising avenues of research. This Doctoral Thesis aims to advance the knowledge and provide novel probiotics and dietary strategies to combat the burden of obesity based on their immunomodulatory properties to shape the metabolic response to the diet. In the First Chapter, we have investigated the anti-obesogenic potential of propyl propane thiosulfinate (PTS), an organo-sulfur compound derived from Allium species, at two different doses (0.1 or 1 mg/kg/day) using a murine model of diet-induced obesity (DIO). Our preclinical findings showed the protective effects of PTS against obesity, reducing body weight gain and maintaining glucose homeostasis, thus suggesting its potential to ameliorate the impact of the HFHSD. In the adipose tissue and the liver, PTS reduced inflammation and the aberrant lipid metabolism caused by the obesogenic diet. Additionally, PTS promoted thermogenic activity in the brown adipose tissue and enhance intestinal gut barrier defense. In view of the modest changes in the microbial ecosystem, we concluded that the effects of PTS were not mediated by the gut microbiota. In the Second Chapter, we have evaluated the anti-obesogenic potential and the mechanism of action of the new intestinal strain, Phascolarctobacterium faecium DSM 32890, isolated in our laboratory from a healthy volunteer. To that aim, we have performed different in vitro and in vivo experiments, including the use of different types of cell cultures (bone marrow-derived macrophages and group 1 of innate lymphoid cells (ILC1s)) and DIO murine models (wild-type C57BL/6J and Rag1-/- mice). Treatment of HFHSD-fed mice with P. faecium, regardless of its viability, shifted the macrophage phenotype towards an M2-type, which counteracted the obesity-induced increase in gut-resident ILC1s and ultimately mitigated glucose intolerance and body weight gain. Moreover, P. faecium treatment prevented systemic inflammation, boosted secretory immunoglobulin A production and induced antimicrobial peptide and interleukin 22 expression. These metabolic benefits were maintained in the absence of an adaptive immune system but were lost when the bacterium was co-administered with an inhibitor (GW2580) of M2 macrophage polarization. We confirmed that P. faecium was more prevalent in the gut metagenomes of non-obese adults regardless of nationality, sex or age, suggesting that it might contribute to safeguard metabolic health in humans. In the Third Chapter, we have investigated the involvement of gut-resident ILC1s in obesity progression and metabolic disruption. To address this goal, we evaluated longitudinally, in a DIO murine model, the ILC1s response to an obesogenic diet and the consequences of the ILC1s depletion. In the intestine, ILC1s depletion blunted the increases in M1 macrophages and ILC2s. Additionally, ILC1s depletion promoted the ILC3-IL22 pathway, increasing mucin production, the expression of antimicrobial gut peptides, and the number of neuroendocrine cells. Moreover, ILC1s depletion restored microbial and metabolomic profiles, resembling those associated with a healthy symbiotic state. The improvements in gut homeostasis were linked to a higher gut hormone secretion, and reduced insulinemia and adiposity., Rebeca Liébana García has been beneficiary of an FPU contract (FPU 18/02026) and a mobility grant (EST22/00430) from Spanish Ministry of Universities. The experimental work conduced in this Doctoral Thesis has been funded by the Spanish Ministry of Science and Innovation (MICINN AGL2017-88801-P, PID2020-119536RB-I00), the Centre for the Development of Industrial Technology (CDTI, Ref 20170847), and the EU H2020 Marie Sklodowska Curie Actions (MSCA-IF “MicroILCs, GA: 8905454).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Europarl-ST: A Multilingual Corpus for Speech Translation of Parliamentary Debates

  • Iranzo-Sánchez, Javier
  • Roselló, Nahuel
  • Silvestre Cerdà, Joan Albert|||0000-0003-2291-8296
  • Jorge-Cano, Javier|||0000-0002-9279-6768
  • Giménez Pastor, Adrián
  • Sanchis Navarro, José Alberto|||0000-0002-2943-0990
  • Civera Saiz, Jorge|||0000-0002-0963-0143
  • Juan, Alfons|||0000-0002-9984-4072
[EN] Current research into spoken language translation (SLT), or speech-to-text translation, is often hampered by the lack of specific data resources for this task, as currently available SLT datasets are restricted to a limited set of language pairs. In this paper we present Europarl-ST, a novel multilingual SLT corpus containing paired audio-text samples for SLT from and into 6 European languages, for a total of 30 different translation directions. This corpus has been compiled using the debates held in the European Parliament in the period between 2008 and 2012. This paper describes the corpus creation process and presents a series of automatic speech recognition, machine translation and spoken language translation experiments that highlight the potential of this new resource. The corpus is released under a Creative Commons license and is freely accessible and downloadable., The research leading to these results has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement no. 761758 (X5gon); MCIU/AEI/FEDER,UE under the Multisub (RTI2018-094879-B-I00) research project and the Government of Spain's FPU scholarship FPU18/04135.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A Water Stress-Tolerant Pepper Rootstock Improves the Behavior of Pepper Plants under Deficit Irrigation through Root Biomass Distribution and Physiological Adaptation

  • Gisbert-Mullor, Ramón|||0000-0002-6491-9038
  • Pascual-Seva, Nuria|||0000-0002-6920-5886
  • Pascual España, Bernardo|||0000-0003-1827-925X
  • López Galarza, Salvador Vicente|||0000-0001-6910-253X
  • Martín-García, Rodrigo
  • Bazon Zidaric, Iva
  • Padilla, Yaiza Gara
  • Calatayud, Ángeles
[EN] The use of rootstocks tolerant to water stress in pepper crops is a complementary technique for saving irrigation water without affecting yields by means of particular rootstock physiological traits, which changes the scion¿s perception stress. The present study aimed to analyze the morphological and physiological adaptation of the `Cuerno¿ pepper cultivar grafted onto tolerant rootstock NIBER® subjected to capacitance sensor-based deficit irrigation. The stomatal conductance, relative water content and leaf water potential parameters were used to confirm the degree of crop stress. Leaf dry weight and root volume were higher in the grafted plants under the control irrigation and stress treatment conditions. Total fresh root biomass and root volume percentage of grafted plants under water stress were 24% and 33% higher, respectively, than the ungrafted plants. The grafted plants subjected to both water stress and control conditions had a higher marketable production than the ungrafted plants. The higher yields obtained using tolerant rootstocks were explained by the reduced blossom-end rot incidence., This work was financed by Grant PID2020-118824RR-C2 funded by MCIN/AEI/10.13039/ 501100011033. Ramón Gisbert-Mullor is a beneficiary of a doctoral fellowship (FPU-MEFP (Spain)). Yaiza Gara Padilla is a beneficiary of grant PRE2018-086374 funded by MCIN/AEI/10.13039/ 501100011033 and, as appropriate, by ESF Investing in your future . Funding for open access charge: Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of high-strength SCC with and without steel fibres on the shear behaviour of dry joints in PCSBs

  • Traver-Abella, Celia
  • Bonet Senach, José Luís|||0000-0002-6687-5307
  • Miguel Sosa, Pedro|||0000-0001-5395-8149
  • Albiol Ibáñez, José Ramón|||0000-0003-3049-9693
[EN] The structural behaviour of precast concrete segmental bridges (PCSBs) heavily relies on the strength of the joints between segments. Multi-keyed dry joints are currently the most commonly used solution in these discontinuity zones. Employing high-strength concrete is becoming increasingly common in civil engineering given its higher strength and improved durability. It specifically allows higher prestressing levels in PCSBs. Using self-compacting concrete enhances workability and adding steel fibres improves mechanical properties. The existing scientific literature includes experimental tests to analyse the shear behaviour of castellated dry joints in different concrete types. However, no experimental tests appear specifically for the castellated dry joints made with high-strength self-compacting concrete (HS-SCC) with and without steel fibres. Therefore, this experimental study conducted 31 push-off-type tests to analyse the behaviour and shear capacity of dry joints made of HS-SCC by investigating the influence of adding steel fibres to the concrete mix. The study examined crack patterns, load-displacement behaviour, failure modes and different (cracking, ultimate and residual) loads. The addition of steel fibres improved joints¿ shear capacity. However, brittle behaviour was observed after reaching ultimate load when using HS-SCC, even when steel fibres were added to the concrete mix. Finally, the adequacy of existing formulations was analysed. Standard AASHTO proved to be on the unsafe side for the castellated dry joints specimens made of HS-SCC without steel fibres, and provided a good approximation for the specimens with steel fibres., The authors thank the financial support provided by Grants: PID2021-126397OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe"; RTI2018-099091-B-C21-AR by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe" and TED2021-129358B-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGeneration EU/PRTR". The authors also thank the Spanish Ministry of Universities for Grant FPU18/03310, which supported Celia Traver Abella. This research was undertaken at the Concrete Science and Technology University Institute (ICITECH) of the Universitat Politecnica de Valencia (UPV; Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Análisis de la variabilidad genética del género Capsicum frente a estreses abióticos para su uso como portainjertos. Estudio de los mecanismos fisiológicos de tolerancia, del comportamiento agronómico y de la calidad del fruto

  • Gisbert-Mullor, Ramón|||0000-0002-6491-9038
[ES] En la actualidad, los estreses abióticos son una de las principales limitaciones en la producción agraria y seguridad alimentaria. La búsqueda de estrategias para conseguir una mejor tolerancia a los estreses abióticos es un objetivo de gran interés a nivel mundial, especialmente frente al estrés supra-térmico teniendo en cuenta el escenario de calentamiento global en el cual nos encontramos. Un modo de sortear los estreses ambientales, bajo el prisma de un manejo integrado o ecológico del cultivo, es la utilización de plantas injertadas como estrategia de adaptación. En pimiento, cultivo de gran importancia económica en nuestro país, la menor utilización de la técnica del injerto es debida a la inexistencia de patrones con suficiente adaptabilidad a condiciones de estrés abiótico. En este sentido, el equipo de investigación mixto entre la Universitat Politècnica de València (UPV) y el Instituto Valenciano de Investigaciones Agrarias (IVIA), el cual engloba esta tesis doctoral, ha sido capaz de seleccionar diferentes accesiones e híbridos de pimiento, entre ellos el híbrido NIBER®, que utilizados como portainjertos han obtenido buenos resultados en término de rendimiento en condiciones de estrés hídrico y salino, y generar información respecto a los diferentes mecanismos fisiológicos y moleculares responsables de dicha tolerancia. Sin embargo, hasta la fecha, la información sigue siendo limitada en diferentes sentidos: no se ha estudiado en profundidad el efecto del injerto a las altas temperaturas; no se ha profundizado en el estudio de los mecanismos de tolerancia del portainjerto NIBER® frente al estrés hídrico causado por un riego deficitario controlado; y por último, ningún estudio se ha centrado en analizar los efectos del propio injerto sobre el rendimiento y calidad de los frutos de variedades tradicionales de pimiento. En este sentido, los objetivos que se han planteado en esta tesis doctoral han sido: I) evaluación fisiológica y agronómica de la tolerancia al estrés supra-térmico de accesiones de Capsicum annuum L. utilizadas como portainjertos; II) estudio de los mecanismos fisiológicos que subyacen en el comportamiento de portainjertos tolerantes a estrés supra-térmico; III) estudio de las bases del comportamiento agronómico y fisiológico de portainjertos de pimiento tolerantes a estrés hídrico en condiciones controladas de riego deficitario; IV) evaluación agronómica y de la calidad del fruto de variedades tradicionales de pimiento injertadas sobre patrones tolerantes a estreses abióticos. En esta tesis doctoral, por un lado, hemos sido capaces de seleccionar accesiones de pimiento, especialmente A57, que utilizadas como portainjertos confieren a la variedad injertada cierto grado de tolerancia al estrés térmico por altas temperaturas. También hemos podido comprobar que estos portainjertos tolerantes permiten a la variedad generar respuestas adaptativas a los efectos negativos de este estrés mediante la modificación de su comportamiento fisiológico, disminuyendo la fuga de electrolitos y la acumulación de H2O2, y aumentando el contenido de clorofilas y carotenoides en las hojas. Esta respuesta fisiológica observada en las hojas resulta en una mejor adaptación fisiológica en su fase reproductiva, mejorando el contenido de prolina en las anteras y la viabilidad de los granos de polen, incrementando con ello el cuajado de frutos y en consecuencia el rendimiento comercial. Por otro lado, hemos visto que la tolerancia al estrés hídrico conferida por el portainjerto NIBER® es consecuencia de una modificación fisiológica que permite mantener los niveles de fotosíntesis con una adecuada eficiencia en el uso del agua, resultando en un mayor rendimiento comercial. En este sentido, el uso de la estrategia de riego deficitario combinada con el uso de portainjertos tolerantes al estrés hídrico y con un mayor desarrollo radical, como es el caso del NIBER®, puede considerarse útil para reducir el consumo de agua, amortiguando lo, [CA] En l'actualitat, els estressos abiòtics són una de les principals limitacions en la producció agrària i seguretat alimentària. La cerca d'estratègies per a aconseguir una millor tolerància als estressos abiòtics és un objectiu de gran interés a nivell mundial, especialment davant de l'estrés supra-tèrmic tenint en compte l'escenari de calfament global en el qual ens trobem. Una manera de sortejar els estressos ambientals, sota el prisma d'un maneig integrat o ecològic del cultiu, és la utilització de plantes empeltades com a estratègia d'adaptació. En pimentó, cultiu de gran importància econòmica al nostre país, la menor utilització de la tècnica de l'empelt és deguda a la inexistència de patrons amb suficient adaptabilitat a condicions d'estrés abiòtic. En aquest sentit, l'equip d'investigació mixt entre la Universitat Politècnica de València (UPV) i l'Institut Valencià d'Investigacions Agràries (IVIA), el qual engloba aquesta tesi doctoral, ha sigut capaç de seleccionar diferents accessions e híbrids de pimentó, entre ells l'híbrid NIBER®, que utilitzats com portaempelts han obtingut bons resultats en terme de rendiment en condicions d'estrés hídric i salí, i generar informació respecte als diferents mecanismes fisiològics i moleculars responsables d'aquesta tolerància. No obstant això, fins hui, la informació continua sent limitada en diferents sentits: no s'ha estudiat en profunditat l'efecte de l'empelt a les altes temperatures; no s'ha aprofundit en l'estudi dels mecanismes de tolerància del portaempelt NIBER® enfront de l'estrés hídric causat per un reg deficitari controlat; i finalment, cap estudi s'ha centrat en estudiar els efectes del propi empelt sobre el rendiment i qualitat dels fruits de varietats tradicionals de pimentó. En aquest sentit, els objectius que s'han plantejat en aquesta tesi doctoral han sigut: I) avaluació fisiològica i agronòmica de la tolerància a l'estrés supra-tèrmic d'accessions de Capsicum annuum L. utilitzades com portaempelts; II) estudi dels mecanismes fisiològics que subjauen en el comportament de portaempelts tolerants a estrés supra-tèrmic; III) estudi de les bases del comportament agronòmic i fisiològic de portaempelts de pimentó tolerants a estrés hídric en condicions controlades de reg deficitari; IV) avaluació agronòmica i de la qualitat del fruit de varietats tradicionals de pimentó empeltades sobre patrons tolerants a estressos abiòtics. En aquesta tesi doctoral, d'una banda, hem sigut capaços de seleccionar accessions de pimentó, especialment A57, que utilitzades com portaempelts confereixen a la varietat empeltada un cert grau de tolerància a l'estrés tèrmic per altes temperatures. També hem pogut comprovar que aquests portaempelts tolerants permeten a la varietat generar respostes adaptatives als efectes negatius d'aquest estrés mitjançant la modificació del seu comportament fisiològic, disminuint la fugida d'electròlits i l'acumulació de H2O2, i augmentant el contingut de clorofil·les i carotenoides en les fulles. Aquesta resposta fisiològica observada en les fulles resulta en una millor adaptació fisiològica en la seua fase reproductiva, millorant el contingut de prolina en les anteres i la viabilitat dels grans de pol·len, incrementant amb això el quallat de fruits i en conseqüència el rendiment comercial. D'altra banda, la tolerància a l'estrés hídric conferida pel portaempelt NIBER® és conseqüència d'una modificació fisiològica que permet mantenir els nivells de fotosíntesi amb una adequada eficiència en l'ús de l'aigua, resultant en un major rendiment comercial. En aquest sentit, l'ús de l'estratègia de reg deficitari combinada amb l'ús de portaempelts tolerants a l'estrés hídric i amb un major desenvolupament radical, com és el cas del NIBER®, pot considerar-se útil per a reduir el consum d'aigua, esmorteint els efectes negatius de l'estrés sobre el rendiment, degut principalment a la menor incidència de BER. Finalment, hem sigut capaços de constatar que l'ús de portaem, [EN] Currently, abiotic stresses are one of the main limitations in agricultural production and food security. The search for strategies to achieve a better tolerance to abiotic stresses is an objective of great interest worldwide, especially in the face of supra-thermal stress, considering the global warming scenario in which we find ourselves. One way to overcome environmental stresses, under the prism of an integrated or ecological management of the crop, is the use of grafted plants as an adaptation strategy. In pepper, a crop of great economic importance in our country, the lesser use of the grafting technique is due to the lack of rootstocks with sufficient adaptability to abiotic stress conditions. In this sense, the mixed research team between Universitat Politècnica de València (UPV) and Instituto Valenciano de Investigaciones Agrarias (IVIA), which includes this doctoral thesis, has been able to select different pepper accessions and hybrids, including the NIBER® hybrid, which used as rootstocks have obtained good results in terms of yield under conditions of water and saline stress, and generate information regarding the different physiological and molecular mechanisms responsible for said tolerance. However, to date, the information remains limited in different ways: the effect of grafting at high temperatures has not been studied in depth; the study of the tolerance mechanisms of the NIBER® rootstock against water stress caused by controlled deficit irrigation has not been studied in depth; and finally, no study has focused on analyzing the effects of the graft itself on the yield and quality of the fruits of traditional pepper varieties. In this sense, the objectives that have been set in this doctoral thesis have been: I) physiological and agronomic evaluation of the tolerance to supra-thermal stress of accessions of Capsicum annuum L. used as rootstocks; II) study of the physiological mechanisms that underlie the behavior of rootstocks tolerant to supra-thermal stress; III) study of the bases of the agronomic and physiological behavior of pepper rootstocks tolerant to water stress under controlled conditions of deficit irrigation; IV) agronomic and fruit quality evaluation of traditional pepper varieties grafted on rootstocks tolerant to abiotic stresses. In this doctoral thesis, on the one hand, we have been able to select pepper accessions, especially A57, which, when used as rootstocks, give the grafted variety a certain degree of tolerance to thermal stress from high temperatures. We have also been able to verify that these tolerant rootstocks allow the variety to generate adaptive responses to the negative effects of this stress by modifying its physiological behavior, decreasing electrolyte leakage and H2O2 accumulation, and increasing the content of chlorophylls and carotenoids in the leaves. This physiological response observed in the leaves results in a better physiological adaptation in its reproductive phase, improving the proline content in the anthers and the viability of pollen grains, thereby increasing fruit set and consequently commercial yield. On the other hand, the tolerance to water stress conferred by the NIBER® rootstock is the consequence of a physiological modification that allows maintaining photosynthesis levels with an adequate water use efficiency, resulting in a higher commercial yield. In this sense, the use of the deficit irrigation strategy combined with the use of tolerant rootstocks to water stress and with greater root development, as is the case of NIBER®, can be considered useful to reduce water consumption, cushioning the negative stress effects on yield, mainly due to the lower incidence of blossom-end rot (BER). Finally, we have been able to verify that the use of tolerant rootstocks to abiotic stresses, such as NIBER®, in traditional pepper varieties could be a useful technique to improve the yield and commercial quality of this crop, mainly by reducing the incidence of BER,, Esta tesis doctoral ha sido realizada gracias a la financiación del Ministerio de Ciencia e Innovación (MCIN/AEI/10.13039/501100011033) mediante los proyectos RTA-2017- 00030-C02 y PID2020-118824RR-C2, y a la financiación del Ministerio de Universidades a través de un contrato predoctoral FPU (FPU18/00564)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Caracterización de las prestaciones y la polución en las caches no inclusivas

  • Pons-Escat, Lucía|||0000-0002-4582-7744
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Pons Terol, Julio|||0000-0002-5654-6753
[ES] La jerarquía de cache ha estado en continua evolución en los procesadores generación tras generación. La última tendencia ha sido la redistribución del espacio de las estructuras de la jerarquía. Se ha reducido el área de la cache disponible por núcleo pero adoptando un esquema no inclusivo en la cache de último nivel. Como resultado, esta nueva organización disminuye el área total de cache disponible por núcleo. Por ello, la gestión del espacio de cache en esta organización se vuelve más crítica que en las caches inclusivas. Este artículo presenta un análisis detallado del impacto que tiene una cache de último nivel (L3) no inclusiva. Se presentan tres estudios de caracterización de las aplicaciones SPEC CPU2006 y SPEC CPU2017. Primero, se compara el reciente esquema no inclusivo con el esquema inclusivo. En segundo lugar, se analiza la relación entre el espacio de cache no inclusiva y las prestaciones -tiempo de ejecución- de las aplicaciones. Finalmente, se analiza la polución de la cache L3, donde se identifican y cuantifican tres principales fuentes de polución: useless prefetches, bad speculation, y poor locality. Los resultados experimentales muestran que las aplicaciones cuyas prestaciones son más sensitivas al espacio de cache de L3 experimentan un número de stalls_L2 y HPKI_L3 alto. Además, es posible identificar aquellas aplicaciones que introducen polución usando los contadores de prestaciones para así poder limitarles el espacio de cache., Este trabajo ha sido financiado por el Ministerio de Ciencia, Innovacion y Universidades mediante la beca FPU18/01948 y junto al FEDER europeo por el proyecto RTI2018-098156-B-C51.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Research data Set de datos (Dataset)

Combining pharmacokinetic and electrophysiological models for early prediction of drug-induced arrhythmogenicity

  • Llopis-Lorente, Jordi
  • Baroudi, Samuel
  • Koloskoff, Kévin
  • Basset, Matthieu
  • Benito, Sylvain
  • Dayan, Frederic
  • Romero Pérez, Lucia|||0000-0003-4605-8630
  • Mora-Fenoll, María Teresa|||0000-0002-8069-2486
  • Saiz Rodríguez, Francisco Javier|||0000-0002-9850-0825
  • Trenor Gomis, Beatriz Ana|||0000-0001-9166-6112
This repository contains the code used to generate the male and female population of models and simulate the different pharmacokinetic scenarios in Llopis-Lorente et al. (2023). Combining pharmacokinetic and electrophysiological models for early prediction of drug-induced arrhythmogenicity
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influence study of rail geometry and track properties on railway rolling noise

  • Andrés-Ruiz, Víctor Tomás
  • Thompson, D. J.
  • Martínez Casas, José|||0000-0001-5706-4951
  • F. D. Denia|||0000-0003-4536-8610
[EN] Wheel/rail interaction generates an excitation due to the roughness present on the surface of both components that produces vibration and consequently rolling noise. In this work, the railway track properties that most influence rolling noise are identified and this influence is analysed to reduce noise emission. The acoustic calculation methodology consists of characterizing the wheel using finite element techniques and the track using periodic structure theory. The influence of the track properties on the sound radiation is analysed by means of statistical techniques applied to the acoustic power results of different track configurations. To achieve this, the rail cross-section geometry is parameterized and numerous simulations are carried out by modifying these geometric parameters and the viscoelastic properties of the track components. Considering the contribution of the wheel, rail and sleeper, the results obtained indicate that the total radiation can be reduced by up to 7.4 dB(A) through an optimal combination of the track design parameters, compared to the worst combination found. In particular, the rail pad stiffness is shown to be the most influential parameter in the sound radiation., This paper is part of the project PID2020-112886RA-I00, grant FPU18/03999 and grant EST21/00213 funded by MCIN/AEI/10.13039/501100011033 as well as by "ESF Investing in your future". The authors also acknowledge Programa PROMETEO/2021/046 of Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Imitation Learning-Based System for the Execution of Self-Paced Robotic-Assisted Passive Rehabilitation Exercises

  • Escarabajal-Sánchez, Rafael José
  • Pulloquinga-Zapata, José
  • Zamora-Ortiz, Pau
  • Valera Fernández, Ángel|||0000-0001-6843-6394
  • Mata Amela, Vicente|||0000-0003-2255-0567
  • Vallés Miquel, Marina|||0000-0002-6396-0098
[EN] The development of robotic-assisted rehabilitation exercises involving physical human-robot interaction requires extreme care since an injured limb may be in physical contact with the robot, so compliant behavior is imperative for these tasks. Typical approaches involve force control schemes like admittance controllers that allow humans to adapt the motion. However, when the patient¿s limb has limited mobility or is potentially injured, unintentional forces may occur during the robot¿s trajectory that could be incompatible with these controllers. This letter addresses a new way of generating compliant trajectories for passive rehabilitation exercises, considering that previous positions of the trajectory are attainable for the patient, so reversing the trajectory is a safe op eration. Since there is no clear way to optimize such a goal due to the physiological variability among patients, the condition of reversal is based on imitation learning by taking the analogous healthy limb of the patient as a reference and encoding the forces using Gaussian Mixture Regression, and reversibility is accomplished by means of Reversible Dynamic Movement Primitives. The system allows for self-paced rehabilitation exercises by back-and-forth movements along the trajectory according to the patient¿s reaction, and it has been successfully applied to a 4-DOF parallel robot for lower-limb rehabilitation., This work was supported in part by the Fondo Europeo de Desarrollo Regional under Grant PID2021-125694OB-I00, in part by the Vicerrectorado de Investigación de la Universitat Politècnica de València under Grant PAID-11-21, and in part by the Ministerio de Universidades, Gobierno de España under Grant FPU18/05105
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A tomato MAGIC population reveals candidate genes for leaf dry matter and phenolics, two key traits for stress resilience and climate-smart breeding

  • Villanueva-Párraga, Gloria|||0000-0002-1475-2882
  • Adalid-Martinez, Ana Maria|||0000-0002-3927-1348
  • Arrones-Olmo, Andrea|||0000-0003-3926-0291
  • Antar, Oussama|||0009-0004-7224-6752
  • Solana-Garcia, Andrea|||0000-0002-1071-7625
  • Vilanova Navarro, Santiago|||0000-0003-4939-9713
  • Plazas Ávila, María de la O|||0000-0001-8090-7312
  • Gramazio, Pietro|||0000-0003-2226-7999
  • Prohens Tomás, Jaime|||0000-0003-1181-9065
  • Pereira-Dias, Leandro|||0000-0002-6246-0294
  • Kleftogianni, Konstantina
  • Bebeli, Penelope J.
  • Papasotiropoulos, Vasileios
[EN] Increasing leaf dry matter and phenolic content in tomato has the potential to enhance plant resilience, a key requirement for food security and sustainable agriculture in the context of climate change. However, phenolics accumulation in vegetative tissues remains understudied, as does dry matter accumulation. To address this gap, we leveraged 293 recombinant lines of an eight-way Tomato Multi-Parent Advanced Generation Inter-Cross (ToMAGIC) population to identify candidate genes for leaf dry matter and phenolic content. We found significant variation among lines. Leaf dry matter ranged from 6.90 to 23.20% (CV = 24.84%). Substantial variation was also observed for specialized phenolic metabolites, showing larger differences among lines compared with dry matter. Chlorogenic acid, the most abundant phenolic, ranged from 0.18 to 6.77 g kg-& sup1; FW (CV = 76.1%), followed by rutin (0.026-0.352 g kg-& sup1; FW, CV = 45.1%), quercetin (0.008-0.141 g kg-& sup1; FW, CV = 49.9%), and kaempferol (0.003-0.032 g kg-& sup1; FW, CV = 48.8%). Total phenolic content averaged 3.65 g kg-& sup1; FW, with nearly a 20-fold range (0.47-8.36 g kg-& sup1; FW) (CV = 45.3%). The emergence of highly divergent phenotypes suggests extensive recombination in the population. Traits were highly correlated with each other, with rho ranging from 0.35 to 0.77, supporting the possibility of indirect selection and suggesting common genetic regulation. Likewise, genomic heritability estimates were moderate to low, where chlorogenic acid presented the highest value (H2 = 0.66) and kaempferol the lowest (H2 = 0.07). GWAS identified 6 significant associations, explaining 4.50% to 28.24% of the phenotypic variation which, upon further study, enabled the prioritization of candidate genes potentially involved in the control of leaf dry matter and chlorogenic acid content. These findings demonstrate the potential of the ToMAGIC population to facilitate the development of climate-smart tomatoes with improved resilience and reduced input requirements., The author(s) declared that financial support was received for this work and/or its publication. This work was funded by a grant under the program "Ayuda a Primeros Proyectos de Investigacion" (PAID-06-22) from the Vicerrectorado de Investigacion of the Universitat Politecnica de Valencia (UPV), by MAGICPIMPCERAS (PID2020-118627RB-I00), funded by MICIU/AEI/10.13039/501100011033, by CIPROM/2021/020, funded by Conselleria d'Innovacio, Universitats, Ciencia i Societat Digital of the Generalitat Valenciana, and by the HARNESSTOM innovation action (grant agreement no. 101000716), funded by the European Commission H2020 Research and Innovation Programme. L.P.-D. is grateful to the Spanish Ministerio de Universidades for a Margarita Salas postdoctoral grant funded by the European Union NextGenerationEU plan. A.A. is grateful to Spanish Ministerio de Ciencia, Innovacion y Universidades for a predoctoral (FPU18/01742) contract. A.S. is grateful to Spanish Ministerio de Ciencia e Innovacion for a predoctoral grant (PRE2022-102368) funded by MCIN/AEI/10.13039/501100011033 and FSE +. O.A. is grateful to Conselleria d'Innovacio, Ciencia i Societat Digital of the Generalitat Valenciana for a pre-doctoral grant within the Santiago Grisolia program (CIGRIS/2022/113). P.G. is grateful to Spanish Ministerio de Ciencia e Innovacion for a post-doctoral grant (RYC2021-031999-I) funded by MCIN/AEI/10.13039/501100011033 and the European Union through NextGenerationEU/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

New insights into short-term water stress tolerance through transcriptomic and metabolomic analyses on pepper roots

  • Padilla-Herrero, Yaiza Gara
  • Zhang, Leilei
  • Lucini,Luigi
  • Calatayud-Chover, Ángeles
  • Gisbert-Mullor, Ramón|||0000-0002-6491-9038
  • Bueso Rodenas, Eduardo|||0000-0002-0828-121X
  • Forment Millet, José Javier|||0000-0002-1872-4061
  • López Galarza, Salvador Vicente|||0000-0001-6910-253X
[EN] In the current climate change scenario, water stress is a serious threat to limit crop growth and yields. It is necessary to develop tolerant plants that cope with water stress and, for this purpose, tolerance mechanisms should be studied. NIBER® is a proven water stress- and salt-tolerant pepper hybrid rootstock (Gisbert-Mullor et al., 2020; López-Serrano et al., 2020), but tolerance mechanisms remain unclear. In this experiment, NIBER® and A10 (a sensitive pepper accession (Penella et al., 2014)) response to short-term water stress at 5 h and 24 h was studied in terms of gene expression and metabolites content in roots. GO terms and gene expression analyses evidenced constitutive differences in the transcriptomic profile of NIBER® and A10, associated with detoxification systems of reactive oxygen species (ROS). Upon water stress, transcription factors like DREBs and MYC are upregulated and the levels of auxins, abscisic acid and jasmonic acid are increased in NIBER®. NIBER® tolerance mechanisms involve an increase in osmoprotectant sugars (i.e., trehalose, raffinose) and in antioxidants (spermidine), but lower contents of oxidized glutathione compared to A10, which indicates less oxidative damage. Moreover, the gene expression for aquaporins and chaperones is enhanced. These results show the main NIBER® strategies to overcome water stress., This work has been financed by Grant PID2020-118824RR-C21 funded by MCIN/AEI/10.13039/501100011033 and Grant PAID -11-21 funded by the Vicerrectorado de Investigaci ' on de la Universidad Polite ' cnica de Valencia. Ram ' on Gisbert-Mullor is a beneficiary of a doctoral fellowship (FPU-MEFP (Spain) ) . Yaiza Gara Padilla is a bene- ficiary of grant PRE2018-086374, funded by MCIN/AEI/10.13039/501100011033 and, as appropriate, by "ESF Investing in your future".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Analysis of the fire resistance of timber jack arch flooring systems used in historical buildings

  • Garcia-Castillo, Ester
  • Paya-Zaforteza, Ignacio
  • Hospitaler Pérez, Antonio|||0000-0001-7108-3104
[EN] Conservation of built heritage, at present, is a major task and a great challenge because it requires adapting the performance of existing buildings to current code requirements, when very often these were built before codes existed. Timber jack arch flooring systems can be found in many historical buildings around the world. The system is formed by timber joists and brick vaults spanning the distance between two adjacent joists and has an undoubtable aesthetic and cultural value. However, given its geometry, there is no methodology to verify its fire resistance, which has prevented the preservation of many buildings using this system. Within this context, this paper proposes a methodology based on the ¿Reduced cross-section method¿ included in Eurocode 5 (EN 1995-1-2) for the determination of the fire resistance of historical timber jack arch flooring systems subjected to different fire exposures. The methodology is based on the use of the 135-degree and the 300-degree isotherms to obtain the positions of the zero-strength layer and the charring depths, and is supported by both advanced numerical thermal models experimentally validated for standard fire exposure and advanced mechanical models. The methodology has been applied to a wide number of flooring systems covering different span lengths, timber static bending strengths, and fire exposures to evaluate the influence of these parameters on fire resistance. Results show that historical buildings do not always meet the requirements set by current codes and, therefore, performing these analyses is essential to ensure the fire resistance of these timber structures. By doing so, this work also contributes to cultural heritage conservation and to more sustainable construction in alignment with the fulfilment of United Nations 2030 Agenda¿s eleventh goal: "Sustainable cities and communities"., The authors wish to express their gratitude to the Spanish Ministry of Economy, Industry and Competitiveness for the funding provided through Project BIA 2014-59036R. This research is also supported by the Spanish Ministry of Science, Innovation and Universities through the PhD grant FPU18/00726 awarded to the first author. Finally, the au-thors want to thank Prof. Dr. Juan Patricio Hidalgo for his help and MSc Enrique Serra for his assistance in the experimental test.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Combined Admittance Control With Type II Singularity Evasion for Parallel Robots Using Dynamic Movement Primitives

  • Escarabajal-Sánchez, Rafael José
  • Pulloquinga-Zapata, José
  • Castillo-García, Fernando J.
  • Valera Fernández, Ángel|||0000-0001-6843-6394
  • Mata Amela, Vicente|||0000-0003-2255-0567
  • Vallés Miquel, Marina|||0000-0002-6396-0098
[EN] This article addresses a new way of generating compliant trajectories for control using movement primitives to allow physical human-robot interaction where parallel robots (PRs) are involved. PRs are suitable for tasks requiring precision and performance because of their robust behavior. However, two fundamental issues must be resolved to ensure safe operation: first, the force exerted on the human must be controlled and limited, and second, Type II singularities should be avoided to keep complete control of the robot. We offer a unified solution under the dynamic movement primitives (DMP) framework to tackle both tasks simultaneously. DMPs are used to get an abstract representation for movement generation and are involved in broad areas, such as imitation learning and movement recognition. For force control, we design an admittance controller intrinsically defined within the DMP structure, and subsequently, the Type II singularity evasion layer is added to the system. Both the admittance controller and the evader exploit the dynamic behavior of the DMP and its properties related to invariance and temporal coupling, and the whole system is deployed in a real PR meant for knee rehabilitation. The results show the capability of the system to perform safe rehabilitation exercises., This work was supported in part by the Fondo Europeo de Desarrollo Regional under Grant PID2021-125694OB-I00, in part by the Vicerrectorado de Investigacion de la Universitat Politecnica de Valencia under Grant PAID-11-21, and in part by the Ministerio de Universidades, Gobierno de Espana under Grant FPU18/05105.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Uncertainty assessment of proarrhythmia predictions derived from multi-level in silico models

  • Kopanska, Karolina
  • Rodriguez-Belenguer, Pablo
  • Llopis-Lorente, Jordi
  • Pastor, Manuel
  • Trenor Gomis, Beatriz Ana|||0000-0001-9166-6112
  • Saiz Rodríguez, Francisco Javier|||0000-0002-9850-0825
[EN] In silico methods can be used for an early assessment of arrhythmogenic properties of drug candidates. However, their use for decision-making is conditioned by the possibility to estimate the predictions' uncertainty. This work describes our efforts to develop uncertainty quantification methods for the predictions produced by multi-level proarrhythmia models. In silico models used in this field usually start with experimental or predicted IC50 values that describe drug-induced ion channel blockade. Using such inputs, an electrophysiological model computes how the ion channel inhibition, exerted by a drug in a certain concentration, translates to an altered shape and duration of the action potential in cardiac cells, which can be represented as arrhythmogenic risk biomarkers such as the APD(90). Using this framework, we identify the main sources of aleatory and epistemic uncertainties and propose a method based on probabilistic simulations that replaces single-point estimates predicted using multiple input values, including the IC(50)s and the electrophysiological parameters, by distributions of values. Two selected variability types associated with these inputs are then propagated through the multi-level model to estimate their impact on the uncertainty levels in the output, expressed by means of intervals. The proposed approach yields single predictions of arrhythmogenic risk biomarkers together with value intervals, providing a more comprehensive and realistic description of drug effects on a human population. The methodology was tested by predicting arrhythmogenic biomarkers on a series of twelve well-characterised marketed drugs, belonging to different arrhythmogenic risk classes., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. The authors received funding from the eTRANSAFE project, Innovative Medicines Initiative 2 Joint Undertaking under Grant Agreement No. 777365, supported from European Union s Horizon 2020 and the EFPIA. Authors declare that this work refects only the author s view, and that IMI-JU is not responsible for any use that may be made of the information it contains. Also, this project received funding from the European Union s Horizon 2020 Research and Innovation programme under Grant Agreement No. 964537 (RISK-HUNT3R), which is part of the ASPIS cluster. We also received funding from the SimCardioTest supported by European Union s Horizon 2020 research and innovation programme under Grant Agreement No. 101016496. J.L.L. is being funded by the Ministerio de Ciencia, Innovacion y Universidades for the Formacion de Profesorado Universitario (Grant Reference: FPU18/01659). The work was also partially support by the Dirección General de Política Científca de la Generalitat Valenciana (PROMETEO/2020/043).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Application of Machine Learning to improve the efficiency of electrophysiological simulations used for the prediction of drug-induced ventricular arrhythmia

  • Rodriguez-Belenguer, Pablo
  • Kopanska, Karolina
  • Llopis-Lorente, Jordi
  • Pastor, Manuel
  • Trenor Gomis, Beatriz Ana|||0000-0001-9166-6112
  • Saiz Rodríguez, Francisco Javier|||0000-0002-9850-0825
[EN] Background and Objective In silico prediction of drug-induced ventricular arrhythmia often requires computationally intensive simulations, making its application tedious and non-interactive. This inconvenience can be mitigated using matrices of precomputed simulation results, allowing instantaneous computation of biomarkers such as action potential duration at 90% of the repolarisation (APD90). However, preparing such matrices can be computationally intensive for the method developers, limiting the range of simulated conditions. In this work, we aim to optimise the generation of these matrices so that they can be obtained with less effort and for a broader range of input values. Methods Machine learning methods were applied, building models trained with only a small fraction of the originally simulated results. The predictive performances of the models were assessed by comparing their predicted values with the actual simulation results, using percentual mean absolute error and mean relative error, as well as the percentage of data with a relative error below 5%. Results Our method obtained highly accurate estimations of the original values, leading to a nearly one hundred-fold decrease in computation time. This method also allows precomputing more complex matrices, describing the effect of more ion channels on the APD90. The best results were obtained by applying Support Vector Machine models, which yielded errors below 1% in most cases. This approach was further validated by predicting the APD90 of a set of 12 CiPA compounds and exporting the optimal settings for predicting APD90 using a different set of ion channels, always with satisfactory results. Conclusions The proposed method effectively reduces the computational effort required to generate matrices of precomputed electrophysiological simulation values. The same approach can be applied in other fields where computationally costly simulations are applied repeatedly using slightly different input values., The authors received funding from the eTRANSAFE project, Innovative Medicines Initiative 2 Joint Undertaking under grant agreement No 777365, supported from European Union's Horizon 2020 and the EFPIA. We also received funding from the SimCardioTest supported by European Union¿s Horizon 2020 research and innovation programme under grant agreement No 101016496. J.L.L. is being funded by the Ministerio de Ciencia, Innovacion y Universidades for the Formacion de Profesorado Universitario (Grant Reference: FPU18/01659). The work was also partially support by the Dirección General de Política Científica de la Generalitat Valenciana (PROMETEO/ 2020/043).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Metal-Free Diastereo- and Enantioselective Dearomative Formal [3+2] Cycloaddition of 2-Nitrobenzofurans and Isocyanoacetate Esters

  • Laviós, Adrian
  • Sanz-Marco, Amparo
  • Vila, Carlos
  • Pedro, José R.
  • Blay, Gonzalo
  • Muñoz Roca, María Del Carmen|||0000-0003-2630-3897
[EN] The diastereo- and enantioselective dearomative formal [3 + 2] cycloaddition of 2-nitrobenzofurans and alpha-aryl-alpha isocyanoacetate esters provides tricyclic compounds bearing the 3a,8b-dihydro-1H-benzofuro[2,3-c]pyrrole framework with three consecutive stereogenic centers. The reaction was enabled by a cupreine-ether organocatalyst. The reaction products were obtained with almost full diastereoselectivity and with excellent enantiomeric excesses for a number of substituted 2-nitrobenzofurans and isocyanoacetates., We acknowledge grant PID2020-116944GB-100 funded by MCIN/AEI/10.13039/501100011033 and by the "European Union Next Generation EU/PRTR", grant RyC-2016-20187 funded by MCIN/AEI/10.13039/501100011033 and by "ESF Investing in your future" to C.V., and grant FPU18/03038 funded by MEC to A.L. We acknowledge access to the NMR, MS, and X-ray facilities from the Servei Central de Suport a la Investigacio Experimental (SCSIE)-UV. Dedicated to Professor Joan Bosch, Universitat de Barcelona, on the occasion of his 75th birthday.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Model-Based Control of a 4-DOF Rehabilitation Parallel Robot with Online Identification of the Gravitational Term

  • Escarabajal-Sánchez, Rafael José
  • Pulloquinga-Zapata, José Luis
  • Díaz-Rodríguez, Miguel
  • Mata Amela, Vicente|||0000-0003-2255-0567
  • Valera Fernández, Ángel|||0000-0001-6843-6394
[EN] Parallel robots are being increasingly used as a fundamental component of lower-limb rehabilitation systems. During rehabilitation therapies, the parallel robot must interact with the patient, which raises several challenges to the control system: (1) The weight supported by the robot can vary from patient to patient, and even for the same patient, making standard model-based controllers unsuitable for those tasks since they rely on constant dynamic models and parameters. (2) The identification techniques usually consider the estimation of all dynamic parameters, bringing about challenges concerning robustness and complexity. This paper proposes the design and experimental validation of a model-based controller comprising a proportional-derivative controller with gravity compensation applied to a 4-DOF parallel robot for knee rehabilitation, where the gravitational forces are expressed in terms of relevant dynamic parameters. The identification of such parameters is possible by means of least squares methods. The proposed controller has been experimentally validated, holding the error stable following significant payload changes in terms of the weight of the patient¿s leg. This novel controller allows us to perform both identification and control simultaneously and is easy to tune. Moreover, its parameters have an intuitive interpretation, contrary to a conventional adaptive controller. The performance of a conventional adaptive controller and the proposed one are compared experimentally., This research was partially funded by Fondo Europeo de Desarrollo Regional (PID2021-125694OB-I00), cofounded by Vicerrectorado de Investigación de la Universitat Politècnica de València (PAID-11-21) and by Ministerio de Universidades, Gobierno de España (FPU18/05105).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Nanoparticle-Mediated Tumor Microenvironment Remodeling Favors the Communication with the Immune Cells for Tumor Killing

  • Lucena-Sánchez, Elena
  • Hicke-García, Francisco Javier|||0000-0002-8419-0467
  • Clara-Trujillo, Sandra|||0000-0002-6455-2993
  • García-Fernández, Alba|||0000-0002-8416-1674
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
[EN] Melanoma is one of the most common types of skin cancer with a bad prognosis and limited treatment options in advanced stages. Immunotherapy has changed the landscape of oncology. Cancer cells can activate various mechanisms to suppress immune responses, such as the immunological checkpoint programmed cell death-1 (PD-1)/programmed cell death-ligand 1 (PD-L1), whose blockage reactivates immune killing of melanoma cells. Moreover, exposure to inhibitory cytokines such as transforming growth factor-beta (TGF-¿) induces T regulatory cell differentiation, which promotes cancer immunosuppression. These advances provided exciting outcomes in the clinical treatment of melanoma, however, there are still limitations, and a combination of several treatments is usually needed. Based on the above, inhibition of the TGF-¿ production and the PD-1/PD-L1 checkpoint may be a feasible strategy to increase T cell infiltration and cytotoxicity and thus overcome tumor immune escape. Here, mesoporous silica nanoparticles loaded with a PD-L1 inhibitor (JQ1, a thienotriazolodiazepine and a potent bromodomain family inhibitor) and capped with polyethyleneimine and a small interfering RNA targeting TGF-¿ are reported. An efficient PD-L1 downregulation and TGF-¿ silencing are achieved using the nanoparticles, along with the promotion of cancer death. This system demonstrates to be a specific and innovative therapeutic approach for the treatment of melanoma., The authors thank the Spanish Government (Project Nos. PID2021-126304OB-C41, (MCUI/FEDER, EU)) and the Generalitat Valenciana (Project No. PROMETEO CIPROM/2021/007). This work was also supported by the CIBER -Consorcio Centro de Investigación Biomédica en Red (Grant No. CB06/01/2012), Instituto de Salud Carlos III, Ministerio de Ciencia e Innovación. E.L.-S. is grateful for her FPU fellowship funded by the MINECO (Grant No. FPU18/06539). F.J.H. thanks MIU for his FPU grant (Grant No. FPU20/06021). Graphical images and schemes were created with BioRender.com.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Optimal design of steel-concrete composite bridge based on a transfer function discrete swarm intelligence algorithm

  • Martínez-Muñoz, D.|||0000-0002-6906-3830
  • Martí Albiñana, José Vicente|||0000-0002-2435-4095
  • Yepes, V.|||0000-0001-5488-6001
  • García, Jose
[EN] Bridge optimization can be complex because of the large number of variables involved in the problem. In this paper, two box-girder steel¿concrete composite bridge single objective optimizations have been carried out considering cost and CO¿ emissions as objective functions. Taking CO¿ emissions as an objective function allows adding sustainable criteria to compare the results with cost. SAMO2, SCA, and Jaya metaheuristics have been applied to reach this goal. Transfer functions have been implemented to fit SCA and Jaya to the discontinuous nature of the bridge optimization problem. Furthermore, a Design of Experiments has been conducted to tune the algorithm and set its parameters. Consequently, it has been observed that SCA shows similar values for objective cost function as SAMO2 but improves computational time by 18% while also getting lower values for the objective function result deviation. From a cost and CO¿ optimization analysis, it has been observed that a reduction of 2.51 kg CO¿ is obtained by each euro reduced using metaheuristic techniques. Moreover, for both optimization objectives, it is observed that adding cells to bridge cross-sections improves not only the section behavior but also the optimization results. Finally, it is observed that the proposed design of double composite action in the supports allows this study to remove continuous longitudinal stiffeners in the bottom flange., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This research has been made possible thanks to funding received from the following research projects: Grant PID2020-117056RB-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe", Grant FPU-18/01592 funded by MCIN/AEI/10.13039/501100011033 and by "ESF invests in your future" and Grant CONICYT/FONDECYT/INICIACION/11180056.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Suitable rootstocks can alleviate the effects of heat stress on pepper plants

  • Gisbert-Mullor, Ramón|||0000-0002-6491-9038
  • López Galarza, Salvador Vicente|||0000-0001-6910-253X
  • Padilla, Yaiza Gara
  • Martínez-Cuenca, Mary-Rus
  • Calatayud, Ángeles
[EN] In this study, different pepper rootstocks are tested for their ability to overcome heat stress situations. This work aims to evaluate: (i) the physiological mechanisms that occur during long heat stress periods (7 days) under controlled conditions in a pepper variety grafted onto accessions; (ii) the heat stress behaviour of these grafted pepper plants under greenhouse conditions in terms of marketable yields. For this purpose, plants of Lamuyo-type sweet pepper `Herminio F1¿ (VA), grafted onto six accessions (VA/A25, VA/A31, VA/A34, VA/A52, VA/A57, VA/A6), and a self-grafted variety (VA/VA) were grown under controlled conditions in growth chambers (28/24 °C, day/night temperatures and 38/24 °C for control and heat stress, respectively) and under greenhouse conditions (38/24 °C). For the controlled conditions, relative growth rate, leaf area, electrolyte leakage, chlorophyll a fluorescence and heat shock proteins were determined. For the greenhouse conditions, fresh and dry weigh, electrolyte leakage and fruit yield were determined. Our results confirmed that grafting a pepper cultivar onto appropriate rootstocks such as A6, A25 and A57 can overcome the negative effects of heat stress conditions with a higher relative growth rate, leaf area and Fv/Fm, and lower electrolyte leakage under the controlled conditions, and with higher marketable yields under the greenhouse conditions., This work has been financed by the INIA (Spain) and the Spanish Ministry of Science, Innovation and Universities through Project RTA-2017-00030-C02 and the European Regional Development Fund (ERDF) . Ramon Gisbert-Mullor is a beneficiary of a doctoral fellowship (FPU-MEFP (Spain) ) . Yaiza Gara Padilla is a beneficiary of a doctoral fellowship (FPI-INIA (Spain) ) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Calibración ojo a mano de un brazo robótico industrial con cámaras 3D de luz estructurada, Eye-to-hand calibration of an industrial robotic arm with structured light 3D cameras

  • Diaz-Cano, Ignacio
  • Quintana, Fernando M.
  • Galindo, Pedro L.
  • Morgado-Estevez, Arturo
[EN] Computer vision is gaining more and more importance in the world of industrial robotics, since it is necessary to carry out increasingly precise and autonomous tasks, which is why a more exact positioning of the robot is needed. This requires the support of a vision system that is the one that gives the robot precision in its pose, calibrating said system with respect to the robot. This work presents a simple methodology to approach this form of calibration, called hand-eye, using a structured light 3D camera that obtains information from the real world and a six-axis industrial robotic arm. The method uses the RANSAC algorithm for the determination of the planes, which represents a notable reduction in errors, since the coordinates of the points sought come from planes adjusted to thousands of points. This allows the system to always have the ability to obtain a transformation matrix from the coordinates of the camera to the base of the robot. In addition, the proposed method is ideal for making a precision comparison between cameras, due to its simplicity and speed of use. In this study, the resulting error analysis was performed using two dfferent 3D cameras: a basic one (Kinect 360) and an industrial one (Zivid ONE + M)., [ES] La visión artificial está cobrando cada día más auge en el mundo de la robótica industrial, ya que es necesario realizar tareas cada vez más precisas y autónomas, por lo que se necesita un posicionamiento del robot más exacto. Para ello se precisa del apoyo de un sistema de visión que sea el que preste al robot precisión en su pose, calibrando dicho sistema con respecto al robot. Este trabajo presenta una metodología sencilla para abordar esta forma de calibración, llamada ojo a mano, empleando una cámara 3D de luz estructurada que obtiene la información del mundo real y un brazo robótico industrial de seis ejes. Esto permite utilizar el algoritmo RANSAC para la determinación de los planos, cuya intersección nos da las coordenadas de los puntos,lo que supone una reducción notable de los errores, ya que las coordenadas proceden de planos ajustados a miles de puntos, lo cual hace que el sistema sea más robusto y capaz de obtener una matriz de transformación de las coordenadas de la cámara a la base del robot, que le permitirá abordar cualquier tarea que precise con una precisión eficiente. Se ha realizado el análisis de errores resultante utilizando dos cámaras 3D diferentes: una básica (Kinect 360) y otra industrial (Zivid ONE+ M)., Este trabajo ha sido realizado parcialmente gracias al apoyo del Plan Estatal de Investigación Científica y Técnica y de Innovación 2017-2020 (AUROVI) EQC2018-005190-P. Fernando M. Quintana agradece al Ministerio de Ciencia, Innovación y Universidades de España su apoyo a través de la ayuda FPU (FPU18/04321).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Development of Choked Flow in Variable Nozzle Radial Turbines

  • Tiseira, Andrés-Omar|||0000-0001-9472-2386
  • García-Cuevas González, Luis Miguel|||0000-0001-9340-0617
  • Echavarria-Olaya, Juan David|||0000-0002-9611-0751
  • Inhestern, Lukas Benjamin
[EN] In commonly applied one-dimensional choking models for radial turbines, choked flow is assumed to appear in the geometrical throat of each stator and rotor. Coupled and complex three-dimensional effects are not considered. In order to analyze the internal aerodynamic in a radial turbine at off design conditions and before carrying out experimental tests, which in the case of automotive turbocharger are limited by their compact size, computational fluid dynamics (CFD) simulations stand out as a useful tool. This paper presents the study of a variable geometry turbine (VGT) of a commercial turbocharger at off design conditions reaching choked flow, analyzing the presence of this limiting conditions in the stator and rotor under different operation points and VGT positions. Reynolds-averaged Navier-Stokes (RANS) and unsteady RANS simulation have been performed to obtain the flow structures in stator and rotor. The results reveal that the choked effective area mostly depends on the stator vane position and pressure ratio. For the closed VGT position a standing shock wave appears on the stator suction side and expands through the vaneless space. For the opened VGT position the flow is choked at the rotor outlet. However, the evolution of the choked area highly depends on the rotational speed and the secondary flow. A strong interaction with the tip leakage vortex has been identified, The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: The work has been partially supported by the "Subprograma de Formacion de Profesorado Universitario (FPU).'' Ministerio de Universidades. FPU18/02628 and by the "FPI Subprograma 2.'' Universitat Polite cnica de Valencia. PAID-10-18.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

An end-to-end solution for out-of-hospital emergency medical dispatch triage based on multimodal and continual deep learning

  • Ferri-Borredà, Pablo|||0000-0002-3083-1169
  • Sáez Silvestre, Carlos|||0000-0003-2678-8249
  • Garcia-Gomez, Juan M
  • Félix-De Castro, Antonio
  • Sánchez-Cuesta, Purificación
[EN] The objective of this study was to build a multimodal, multitask predictive model-named E2eDeepEMC2-to improve out-of-hospital emergency incident severity assessments while coping with shifts in data distributions over time. We drew on 2054694 independent incidents recorded by the Valencian emergency medical dispatch service between 2009 and 2019 (excluding 2013), combining demographic, temporal, clinical and free-text inputs. To handle temporal drift, our model integrates continual learning strategies and comprises three encoder modules (for context, clinical data and text), whose outputs are merged to predict the life-threatening level, admissible response delay and emergency system jurisdiction. Compared with the Valencian Region's existing in-house triage protocol, E2eDeepEMC2 achieved absolute F1-score gains of 18.46% for life-threatening level, 25.96% for response delay and 3.63% for jurisdiction. Compared to non-continual learning baselines, it also outperformed them by 3.04%, 9.66% and 0.58%, respectively. Deployment of E2eDeepEMC2 is currently underway in the Valencian Region, underscoring its practical impact on real-world emergency dispatch decision-making., This work has received support from the Ministry of Science, Innovation, and Universities of Spain through the FPU18/06441 program and the KINEMAI project (PID2022-138636OA-I00) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Machine learning based digital twins on vehicle transient cycles and their potential for predicting fuel consumption

  • Tomanik, Eduardo
  • Jiménez-Reyes, Antonio José
  • Tomanik, Victor
  • Tormos, B.|||0000-0002-8852-3783
[EN] Transient car emission tests generate huge amount of test data, but their results are usually evaluated only using their "accumulated" cycle values according to the homologation limits. In this work, two machine learning models were developed and applied to a truck RDE test and two light-duty vehicle chassis emission tests. Different from the conventional approach, the engine parameters and fuel consumption were acquired from the Engine Control Unit, not from the test measurement equipment. Instantaneous engine values were used as input in machine-learning-based digital twins. This novel approach allows for much less costly vehicle tests and optimizations. The paper¿s novel approach and developed digital twins model were able to predict both instantaneous and accumulated fuel consumption with good accuracy, and also for tests cycles different to the one used to train the model., This research was partially funded by the Spanish Ministry of Science, Innovation and Universities for financing the PhD studies of Antonio J. Jimenez-Reyes (grant FPU18/02116).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Hybrid Swarm Intelligence Optimization Methods for Low-Embodied Energy Steel-Concrete Composite Bridges

  • Martínez-Muñoz, D.|||0000-0002-6906-3830
  • Martí Albiñana, José Vicente|||0000-0002-2435-4095
  • Yepes, V.|||0000-0001-5488-6001
  • García, Jose
[EN] Bridge optimization is a significant challenge, given the huge number of possible configurations of the problem. Embodied energy and cost were taken as objective functions for a box-girder steel¿concrete optimization problem considering both as single-objective. Embodied energy was chosen as a sustainable criterion to compare the results with cost. The stochastic global search TAMO algorithm, the swarm intelligence cuckoo search (CS), and sine cosine algorithms (SCA) were used to achieve this goal. To allow the SCA and SC techniques to solve the discrete bridge optimization problem, the discretization technique applying the k-means clustering technique was used. As a result, SC was found to produce objective energy function values comparable to TAMO while reducing the computation time by 25.79%. In addition, the cost optimization and embodied energy analysis revealed that each euro saved using metaheuristic methodologies decreased the energy consumption for this optimization problem by 0.584 kW·h. Additionally, by including cells in the upper and lower parts of the webs, the behavior of the section was improved, as were the optimization outcomes for the two optimization objectives. This study concludes that double composite action design on supports makes the continuous longitudinal stiffeners in the bottom flange unnecessary., The author gratefully acknowledge the fundings received by: Grant PID2020- 117056RB-I00 funded by MCIN/AEI/10.13039/501100011033 and by ¿ERDF A way of making Europe¿. Grant FPU-18/01592 funded by MCIN/AEI/10.13039/501100011033 and by ¿ESF invests in your future¿ and Grant CONICYT/FONDECYT/INICIACION/11180056
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

MLLP-VRAIN Spanish ASR Systems for the Albayzín-RTVE 2020 Speech-to-Text Challenge: Extension

  • Baquero-Arnal, Pau
  • Iranzo-Sánchez, Javier
  • Pérez-González de Martos, Alejandro Manuel
  • Jorge-Cano, Javier|||0000-0002-9279-6768
  • Giménez Pastor, Adrián
  • Garcés Díaz-Munío, Gonçal|||0000-0002-2594-5858
  • Silvestre Cerdà, Joan Albert|||0000-0003-2291-8296
  • Civera Saiz, Jorge|||0000-0002-0963-0143
  • Sanchis Navarro, José Alberto|||0000-0002-2943-0990
  • Juan, Alfons|||0000-0002-9984-4072
[EN] This paper describes the automatic speech recognition (ASR) systems built by the MLLP-VRAIN research group of Universitat Politècnica de València for the Albayzín-RTVE 2020 Speech-to-Text Challenge, and includes an extension of the work consisting of building and evaluating equivalent systems under the closed data conditions from the 2018 challenge. The primary system (p-streaming_1500ms_nlt) was a hybrid ASR system using streaming one-pass decoding with a context window of 1.5 seconds. This system achieved 16.0% WER on the test-2020 set. We also submitted three contrastive systems. From these, we highlight the system c2-streaming_600ms_t which, following a similar configuration as the primary system with a smaller context window of 0.6 s, scored 16.9% WER points on the same test set, with a measured empirical latency of 0.81 ± 0.09 s (mean ± stdev). That is, we obtained state-of-the-art latencies for high-quality automatic live captioning with a small WER degradation of 6% relative. As an extension, the equivalent closed-condition systems obtained 23.3% WER and 23.5% WER, respectively. When evaluated with an unconstrained language model, we obtained 19.9% WER and 20.4% WER; i.e., not far behind the top-performing systems with only 5% of the full acoustic data and with the extra ability of being streaming-capable. Indeed, all of these streaming systems could be put into production environments for automatic captioning of live media streams., The research leading to these results has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreements no. 761758 (X5Gon) and 952215 (TAILOR), and Erasmus+ Education programme under grant agreement no. 20-226-093604-SCH (EXPERT); the Government of Spain's grant RTI2018-094879-B-I00 (Multisub) funded by MCIN/AEI/10.13039/501100011033 & "ERDF A way of making Europe", and FPU scholarships FPU14/03981 and FPU18/04135; the Generalitat Valenciana's research project Classroom Activity Recognition (ref. PROMETEO/2019/111), and predoctoral research scholarship ACIF/2017/055; and the Universitat Politecnica de Valencia's PAID-01-17 R&D support programme.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Microscopic Identification of 24 Timber Samples Obtained from Half-Timber Walls in Northern Spain-Considerations on the Relationship between Species and Constructive Needs

  • Hueto-Escobar, Alicia|||0000-0003-4628-6545
  • Vegas López-Manzanares, Fernando|||0000-0003-0315-6839
  • Mileto, Camilla|||0000-0002-6987-8802
[EN] Traditional architecture characteristically uses locally available materials to develop constructive systems and techniques, providing an optimum response to the needs of the population. This study focuses on half-timber walls as a traditional technique taking material form in a wide range of variants found mostly in the northwest half of Spain. Primarily aiming to ensure the broad objective of in-depth documentation, understanding, and study, the microscopic analysis of 24 timber samples obtained from different half-timber walls is proposed. This analysis aims to identify the species or species groups used and to establish a correlation with different aspects of construction including structural resistance, durability, and workability. This makes it possible to identify the predominant use of species found close to the locations from which the samples are obtained, using relatively resistant species for the structural elements of the half-timber wall, as well as the use of species with flexible and easily malleable branches for the construction of the enclosure panels. This indicates that, among the species available in a given location, builders have a degree of knowledge on the characteristics of the material, so they could choose the most suitable ones or develop specific constructive solutions based on these characteristics., This work is part of the research project "Risk-Terra: La arquitectura de tierra en la Peninsula Iberica: Estudio de los riesgos naturales, sociales y antropicos y estrategias de intervencion e incremento de la resiliencia" (Ref. RTI2018-095302-B-I00; main researchers: Camilla Mileto y Fernando Vegas), funded by the Spanish Ministry of Science, Innovation and University. This research has been developed within a doctoral thesis funded by the Spanish Ministry of Science, Innovation and University (Ref. FPU18/01596).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Railway rolling noise in curved tracks: Dynamic modelling of the wheelset and influence of the curve

  • Andrés-Ruiz, Víctor Tomás
  • Thompson, D. J.
  • Bruni, Stefano
  • Martínez Casas, José|||0000-0001-5706-4951
  • F. D. Denia|||0000-0003-4536-8610
[EN] Railway wheelsets operating on curved tracks experience complex dynamic behaviour which can affect the generation of rolling noise. This paper presents a comprehensive study on the dynamic response of wheelsets on curved tracks and the associated rolling noise radiation from the wheel and track. A dynamic model is developed to accurately compute the vibrational response of the flexible wheelset, considering the inertial effects associated with its rotation and trajectory along the curved track. An axisymmetric approach is proposed, which reduces significantly the computational effort in comparison to a three-dimensional numerical model. Considering a railway vehicle and its interaction with the track, the rolling noise generated in curved conditions is evaluated. Noise radiated as a result of a vehicle running on curves of 300 m and 2 km radius is compared with a tangent track. Differences in the sound radiation are found among the acoustic levels associated with each wheelset, the steady-state position of such wheelsets on the rails being a key factor., This paper is part of the project PID2020-112886RA-I00, project PID2023-148483OB-I00, grant FPU18/03999, and grant EST22/00353 funded by MCIN/AEI/10.13039/501100011033 as well as by "ESF Investing in your future". The authors also acknowledge Programa PROMETEO/2021/046 of Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Tools for assessing qualitatively the level of circularity of organisations: Applicability to different sectors

  • Valls-Val, K.|||0000-0002-5738-2789
  • Ibáñez-Forés, Valeria
  • Bovea, María D.
[EN] The transition towards a circular economy (CE) has been identified as one of the biggest challenges for our society in general and for organisations in particular. In this context, organisations have begun to call for methods to measure their level of circularity and therefore, in recent years, various specific CE tools have been developed. The objective of this study is to analyse the applicability, utility and user-friendliness of CE tools that autonomously measure the level of circularity of organisations by using qualitative data. For this purpose, seven qualitative CE tools (CAS2.0, CE-Diagnosis, CircularTRANS, Circulytics, CM-FLAT, INEDIT and MATChE) are selected and applied to four organisations (two belonging to the service sector and two to the production sector). The results show that, due to the absence of uniformity, regularity, and singularity in the CE assessment, the circularity indicators included in each CE tool analysed are different; therefore, the level of circularity calculated for each specific organisation by means of the different CE tools are comparable. Moreover, the CE tools are heterogeneous in terms of content, length and number of questions; and they do not incorporate the specific characteristics of the different sectors of the organisations analysed. Furthermore, after gathering the opinions of managers regarding the applicability of each CE tool to each organisation, it is observed that the existing CE tools can be useful but need further development. For these reasons, further research and development of standardised sectoral CE tools that consider sector specificities and allow organisations to obtain accurate and comparable results is needed., The authors are grateful to the Ministerio de Ciencia, Innovación y Universidades (Spain) (DPI2017-89451-R and FPU18/02816) for the financial support and to the respondents from the organisations for their participation in this study.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

MLLP-VRAIN UPV systems for the IWSLT 2022 Simultaneous Speech Translation and Speech-to-Speech Translation tasks

  • Iranzo-Sánchez, Javier
  • Pérez-González de Martos, Alejandro
  • Baquero-Arnal, Pau
  • Jorge-Cano, Javier|||0000-0002-9279-6768
  • Giménez Pastor, Adrián
  • Garcés Díaz-Munío, Gonçal|||0000-0002-2594-5858
  • Silvestre Cerdà, Joan Albert|||0000-0003-2291-8296
  • Civera Saiz, Jorge|||0000-0002-0963-0143
  • Sanchis Navarro, José Alberto|||0000-0002-2943-0990
  • Juan, Alfons|||0000-0002-9984-4072
[EN] This work describes the participation of the MLLP-VRAIN research group in the two shared tasks of the IWSLT 2022 conference: Simultaneous Speech Translation and Speech-to-Speech Translation. We present our streaming-ready ASR, MT and TTS systems for Speech Translation and Synthesis from English into German. Our submission combines these systems by means of a cascade approach paying special attention to data preparation and decoding for streaming inference., The research leading to these results has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreements no. 761758 (X5Gon) and 952215 (TAILOR), and Erasmus+ Education programme under grant agreement no. 20- 226-093604-SCH (EXPERT); the Government of Spain¿s grant RTI2018-094879-B-I00 (Multisub) funded by MCIN/AEI/10.13039/501100011033 & ERDF A way of making Europe, and FPU scholarships FPU18/04135; and the Generalitat Valenciana¿s research project Classroom Activity Recognition (ref. PROMETEO/2019/111).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Social Impact Assessment Comparison of Composite and Concrete Bridge Alternatives

  • Martínez-Muñoz, D.|||0000-0002-6906-3830
  • Martí Albiñana, José Vicente|||0000-0002-2435-4095
  • Yepes, V.|||0000-0001-5488-6001
[EN] The definition of sustainability includes three fundamental pillars: economic, environmental, and social. Studies of the economic impact on civil engineering infrastructures have been focused on cost reduction. It is not necessarily in line with economic sustainability due to the lack of other economic factors. Moreover, the social pillar assessment has been weakly developed compared to the economic and the environmental ones. It is essential to focus on the social pillar and evaluate clear indicators that allow researchers to compare alternatives. Furthermore, bridge life cycle assessment studies have been focused on concrete options. This has resulted in a lack of analysis of the impact of composite bridge alternatives. This study is conducted in two stages. The first part of the study makes a cradle-to-grave social and environmental sustainability evaluation with the SOCA v2 and ecoinvent v3.7.1 databases. This assessment is carried out on four concrete and composite bridge alternatives with span lengths between 15 and 40 m. The social impact weighting method and recipe have been used to obtain the social and environmental indicators. The second part of the study compares the results obtained from the social and environmental assessment of the concrete and the composite alternatives varying the steel recycling rate. The bridge alternatives are prestressed concrete solid slab, prestressed concrete lightened slab, prestressed concrete box-girder, and steel¿concrete composite box-girder. The results show that composite options are the best for environmental impact, but the concrete box girder solutions are better for social impact. Furthermore, an increase in the steel recycling rate increases the social impact and decreases the environmental one., This research was funded by: Grant PID2020-117056RB-I00 funded byMCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe". Grant FPU-18/01592 funded by MCIN/AEI/10.13039/501100011033 and by "ESF invests in your future".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Hybrid Endometrial-Derived Hydrogels: Human Organoid Culture Models and In Vivo Perspectives

  • Gómez-Álvarez, María
  • Bueno-Fernandez, Clara
  • Rodríguez-Eguren, Adolfo
  • Francés-Herrero, Emilio
  • Agustina-Hernández, Marcos
  • Faus, Amparo
  • Galán, Amparo
  • Pellicer, Antonio
  • Ferrero, Hortensia
  • Cervelló, Irene
  • Gisbert-Roca, Fernando|||0000-0003-3937-5822
  • Martínez-Ramos, Cristina|||0000-0002-6540-4714
[EN] The endometrium plays a vital role in fertility, providing a receptive environment for embryo implantation and development. Understanding the endometrial physiology is essential for developing new strategies to improve reproductive healthcare. Human endometrial organoids (hEOs) are emerging as powerful models for translational research and personalized medicine. However, most hEOs are cultured in a 3D microenvironment that significantly differs from the human endometrium, limiting their applicability in bioengineering. This study presents a hybrid endometrial-derived hydrogel that combines the rigidity of PuraMatrix (PM) with the natural scaffold components and interactions of a porcine decellularized endometrial extracellular matrix (EndoECM) hydrogel. This hydrogel provides outstanding support for hEO culture, enhances hEO differentiation efficiency due to its biochemical similarity with the native tissue, exhibits superior in vivo stability, and demonstrates xenogeneic biocompatibility in mice over a 2-week period. Taken together, these attributes position this hybrid endometrial-derived hydrogel as a promising biomaterial for regenerative treatments in reproductive medicine., This work was supported by Instituto de Salud Carlos III and co-founded by the European Union (Fondo Social Europeo), «El FSE invierte en tu futuro» (PI21/00305 [IC]) through the Miguel Servet Program (CP20/00120 [HF]; CP19/00149 [IC]), Ministerio de Universidades (FPU20/00251 [MGÁ], FPU19/04850 [ARE], FPU18/06327 [EFH], MS21-142 [CBF]), Generalitat Valenciana (CIAPOT/2022/29 [MAH], CIPROM/2021/058 [AP and IC]), and Vicerrectorado de Investigación de la Universitat Politècnica de València (PAID-10-22 [FGR]).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Glucose-Fueled Gated Nanomotors: Enhancing In Vivo Anticancer Efficacy via Deep Drug Penetration into Tumors

  • Escudero-Noguera, Andrea|||0000-0003-2670-6127
  • Hicke-García, Francisco Javier|||0000-0002-8419-0467
  • Esteve-Moreno, Juan José|||0000-0002-1259-7663
  • García-Fernández, Alba|||0000-0002-8416-1674
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
  • Lucena-Sánchez, Elena
  • Pradana-López, Sandra
  • Sanz-Álvarez, Víctor
  • Garrido-Cano, Iris
  • Torres-Ruiz, Sandra
  • Cejalvo, Juan Miguel
  • Diez-Sánchez, Paula
[EN] Bioinspired nano/micromotors with drug delivery capabilities are emerging tools with the promising potential to treat numerous diseases. However, some major challenges must be overcome before reaching real biomedical applications. Above all, it is necessary to design engines that employ biocompatible and bioavailable fuels to induce efficient propulsion in biological environments. In addition, ideal nanomotors should also be capable of delivering the cargo on-command using selected stimuli. To tackle these challenges, we herein present the design and evaluation (both in vitro and in vivo) of a glucose-driven gated Janus nanomotor that performs on-demand anticancer drug delivery to treat solid tumors. The motor's nanoarchitectonics is based on the anisotropic conjunction of catalytic platinum nanodendrites (PtNds) and a mesoporous silica nanoparticle (acting as a nanocontainer for anticancer drug doxorubicin) capped with enzyme glucose oxidase (GOx). Autonomous nanomotor movement is achieved thanks to two catalytic components, GOx and PtNds, in a hybrid cascade reaction: GOx transforms glucose to give H2O2 that is subsequently catalyzed by PtNds into H2O and O2. Besides, gatekeeper moieties (GOx) respond to the presence of intracellular proteases, which induces doxorubicin delivery. Biological experiments with the nanomotor are carried out in cancer cell cultures, three-dimensional (3D) tumor models (spheroids), in vivo and in patient-derived organoids (PDOs). A strong anticancer effect is found and attributed to the synergistic combination glucose-induced propulsion, controlled drug delivery, elimination of glucose (by GOx), ROS production (H2O2 generation by GOx) and hypoxia reduction (O2 generated by PtNds). Taken together, this study advances the engineering of endogenously fueled nanomotors for in vivo operation and provides insights into the application of active particles in cancer therapy toward clinical application., The authors acknowledge the financial support from Project PROMETEO 2018/024 from the Generalitat Valenciana, Project RTI2018-100910-B-C41 and PID2021-126304OB-C41 funded by MCIN/AEI and FEDER, Project MFA/2022/049 from Advanced Materials program funding by European Union NextGenerationEU (PRTR-C17.I1) and the Generalitat Valenciana and the European Research Council (ERC) via Advanced Grant (101052997, EDISON). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or European Research Council. Neither the European Union nor the granting authority can be held responsible for them. A.E. thanks the Generalitat Valenciana for her PhD grant (ACIF/2018/110). F.J.H. thanks MIU for his FPU grant (FPU20/06021). E.L.-S. is also grateful for her FPU fellowship funded by MINECO (FPU18/06539). P.D. thanks the Instituto de Salud Carlos III and the European Social Fund for financial support "Sara Borrell" (CD20/00120) and Scientific Foundation of the Spanish Association Against Cancer (AECC) for her postdoctoral grant (INVES246470DIEZ). S.P.-L. thanks Investigo program of the Spanish Government funded by NextGenerationEU from the European Union. V.S.-A. thanks MIU for his FPI grant (PRE2022-103714), J.J.E.-M. thanks the AECC Scientific Foundation for his PhD grant (PRDVA21651ESTE). I.G.-C. was funded by Margarita Salas postdoctoral grant (European Union-Next generation EU). J.M.C. was funded by Sociedad Espanola de Oncologia Medica (Juan Rodes-SEOM). The authors are especially thankful to the associations Amunt Contra el Cancer, La Venuseta, Corazon Solidario Contra el Cancer, Mou-te Per Elles, and Asociacion Las Triples. Scheme A and Figures A-i,B-i, A-i, A, A, and A were created with BioRender.com https://BioRender.com/xs7c89a