Skip to main content

DISEÑO Y MANTENIMIENTO OPTIMO ROBUSTO Y BASADO EN FIABILIDAD DE PUENTES E INFRAESTRUCTURAS VIARIAS DE ALTA EFICIENCIA SOCIAL Y MEDIOAMBIENTAL BAJO PRESUPUESTOS RESTRICTIVOS

BIA2017-85098-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2017
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 72
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Incorporating pavement deterioration uncertainty into pavement management optimization

  • García-Segura, Tatiana|||0000-0002-7059-0566
  • Montalbán-Domingo, Laura|||0000-0002-9506-0350
  • Llopis-Castelló, David|||0000-0002-9228-5407
  • Sanz-Benlloch, Amalia|||0000-0001-8051-0649
  • Pellicer, Eugenio|||0000-0001-9100-0644
  • Lepech, Michael D.
[EN] Pavement management systems can be used to efficiently allocate limited maintenance budgets to better align with pavement deterioration. However, pavement deterioration is subject to uncertain factors that complicate the prediction of future pavement conditions accurately, entailing differences in the optimum maintenance strategy. This paper addresses this challenge by introducing a method to aid local engineers in optimising the scheduling of maintenance activities under uncertain pavement deterioration conditions. Markov chains are used to simulate the variability of life-cycle performance. Moreover, a multi-objective optimisation of an urban network is carried out to find the maintenance programme that minimises the mean life-cycle cost, maximises the mean user benefit, and minimises the standard deviation of life-cycle cost. This third objective enables the optimisation routine to minimise the possibility of unintentionally increasing the life-cycle cost due to system variability. This approach results in a reduction of the life-cycle cost variability by up to 62%, provides pavement strategies that benefit road users as a result of better pavement conditions, and reduces the risk of resorting to costly future maintenance activities., This work was supported by the Spanish Ministry of Science and Innovation with the European Regional Development Fund (grants BIA2017-85098-R and RTC-2017-6148-7).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Environmental and social impact assessment of optimized post-tensioned concrete road bridges

  • Penades-Pla, Vicent
  • Martínez-Muñoz, D.|||0000-0002-6906-3830
  • García-Segura, Tatiana|||0000-0002-7059-0566
  • Navarro -Martinez, Ignacio Javier
  • Yepes, V.|||0000-0001-5488-6001
[EN] Most of the definitions of sustainability include three basic pillars: economic, environmental, and social. The economic pillar has always been evaluated but not necessarily in the sense of economic sustainability. On the other hand, the environmental pillar is increasingly being considered, while the social pillar is weakly developed. Focusing on the environmental and social pillars, the use of methodologies to allow a wide assessment of these pillars and the integration of the assessment in a few understandable indicators is crucial. This article is structured into two parts. In the first part, a review of life cycle impact assessment methods, which allow a comprehensive assessment of the environmental and social pillars, is carried out. In the second part, a complete environmental and social sustainability assessment is made using the ecoinvent database and ReCiPe method, for the environmental pillar, and SOCA database and simple Social Impact Weighting method, for the social pillar. This methodology was used to compare three optimized bridges: two box-section post-tensioned concrete road bridges with a variety of initial and maintenance characteristics, and a pre-stressed concrete precast bridge. The results show that there is a high interrelation between the environmental and social impact for each life cycle stage., This research was funded by the Ministerio de Economia, Ciencia y Competitividad and FEDER funding grant number [BIA2017-85098-R]
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Environmental, Economic and Social Impact Assessment: Study of Bridges in China&apos, s Five Major Economic Regions

  • Zhou, ZhiWu
  • Alcalá-González, Julián|||0000-0003-1376-8441
  • Yepes, V.|||0000-0001-5488-6001
[EN] The construction industry of all countries in the world is facing the issue of sustainable development. How to make effective and accurate decision-making on the three pillars (Environment; Economy; Social influence) is the key factor. This manuscript is based on an accurate evaluation framework and theoretical modelling. Through a comprehensive evaluation of six cable-stayed highway bridges in the entire life cycle of five provinces in China (from cradle to grave), the research shows that life cycle impact assessment (LCIA), life cycle cost assessment (LCCA), and social impact life assessment (SILA) are under the influence of multi-factor change decisions. The manuscript focused on the analysis of the natural environment over 100 years, material replacement, waste recycling, traffic density, casualty costs, community benefits and other key factors. Based on the analysis data, the close connection between high pollution levels and high cost in the maintenance stage was deeply promoted, an innovative comprehensive evaluation discrete mathematical decision-making model was established, and a reasonable interval between gross domestic product (GDP) and sustainable development was determined., This research was funded by the Spanish Ministry of Economy and Competitiveness, along with FEDER (Fondo Europeo de Desarrollo Regional), project grant number: BIA2017-85098-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Life Cycle Optimization Analysis of Bridge Sustainable Development

  • Zhou, Zhiwu
[ES] En el núcleo de la industria mundial de la construcción radica el uso excesivo de materiales, especialmente de combustibles fósiles. En esta línea de investigación, muchos investigadores y diseñadores han reducido significativamente la proporción de materiales y han minimizado la cantidad destinada al diseño en función de los criterios de investigación y las especificaciones de diseño. Teniendo en cuenta que las medidas anteriores pueden reducir los materiales de manera efectiva, es necesario investigar más a fondo algunas cuestiones: a) ¿En qué etapas del ciclo de vida de los materiales de construcción se consumen más? b) ¿Cómo utilizar el método científico más adecuado para reducir el consumo de materiales en la fase de mayor uso? c) ¿Cómo completar científicamente la evaluación de la optimización del consumo de materiales bajo la influencia de la superación de muchos eventos discretos y factores de influencia externos durante la etapa de diseño? d) En la fase de construcción, ¿cómo optimizar al máximo el proceso de gestión del proyecto y lograr el mayor ahorro de material para garantizar la calidad, la seguridad y el coste? e) ¿Cuánto material se puede ahorrar mediante la optimización del diseño y la gestión del proyecto? f) ¿Cuál es el impacto final del sistema teórico de investigación y de los datos de análisis mencionados en el desarrollo sostenible de la industria de la construcción? Al examinar publicaciones relevantes sobre el ciclo de vida completo de la industria de la construcción (Capítulo 2), la tesis encontró que las etapas de diseño y construcción son clave para reducir efectivamente el consumo de materiales. El objetivo principal de esta tesis es resolver los problemas de optimización propuestos. Mediante el establecimiento de un marco de modelo de investigación multidimensional y un modelo de optimización de gestión de proyectos sistemático, la tesis reduce el peso de varios componentes estructurales del puente estáticamente indeterminado y realiza la optimización ligera de la estructura del puente. La tesis establece varios modelos teóricos básicos de innovación en el marco del modelo de investigación: el modelo de acoplamiento bibliométrico, el modelo matemático ComplexPlot; el modelo matemático integral multifactorial; el modelo de optimización de acoplamiento micro y macrodimensional de elementos finitos, y el modelo de evaluación de optimización de la gestión de proyectos dominó del método de la entropía. El sistema de investigación teórica supera la interferencia de la discreción del objeto de investigación, la complejidad y los factores de influencia inciertos y realiza la solidez de la evaluación y la mejora. El sistema de investigación teórica supera la interferencia de la discreción del objeto de investigación, la complejidad y los factores de influencia inciertos y consigue la solidez de la evaluación y la mejora. Asimismo, mejora ampliamente la resistencia del modelo a los factores naturales, humanos, accidentales e inciertos y el problema de la interferencia externa de las emergencias. Por último, el sistema formó un conjunto completo de sistemas de modelos de optimización de prevención y control conjuntos maduros y alcanzó los objetivos y enfoques de la investigación. El valor de la investigación de esta tesis: a) llena el vacío de la investigación en este campo. b) innova en una variedad de nuevos modelos teóricos de investigación. c) resuelve los problemas de discreción, incertidumbre e interferencia de factores externos en la optimización de la topología y la optimización de la gestión de proyectos. Las interferencias de los factores externos de mutación y la sensibilidad de las emergencias se compensan y corrigen. d) La investigación mejora la captura de datos discretos y la escasez de compensación del sistema de análisis de software Monte Carlo., [CA] En el nucli de la indústria mundial de la construcció radica l'ús excessiu de materials, especialment de combustibles fòssils. En aquesta línia d'investigació, molts investigadors i dissenyadors han reduït significativament la proporció de materials i han minimitzat la quantitat destinada al disseny en funció dels criteris d'investigació i les especificacions de disseny. Tenint en compte que les mesures anteriors poden reduir els materials de manera efectiva, és necessari investigar més a fons algunes qüestions: a) En quines etapes del cicle de vida dels materials de construcció es consumeixen més? b) Com utilitzar el mètode científic més adequat per a reduir el consum de materials en la fase de major ús? c) Com completar científicament l'avaluació de l'optimització del consum de materials sota la influència de la superació de molts esdeveniments discrets i factors d'influència externs durant l'etapa de disseny? d) En la fase de construcció, com optimitzar al màxim el procés de gestió del projecte i aconseguir el major estalvi de material per a garantir la qualitat, la seguretat i el cost? e) Quant material es pot estalviar mitjançant l'optimització del disseny i la gestió del projecte? f) Quin és l'impacte final del sistema teòric d'investigació i de les dades d'anàlisis esmentades en el desenvolupament sostenible de la indústria de la construcció? En examinar publicacions rellevants sobre el cicle de vida complet de la indústria de la construcció (Capítol 2), la tesi va trobar que les etapes de disseny i construcció són clau per a reduir efectivament el consum de materials. L'objectiu principal d'aquesta tesi és resoldre els problemes d'optimització proposats. Mitjançant l'establiment d'un marc de model d'investigació multidimensional i un model d'optimització de gestió de projectes sistemàtic, la tesi redueix el pes de diversos components estructurals del pont estàticament indeterminat i realitza l'optimització lleugera de l'estructura del pont. La tesi estableix diversos models teòrics bàsics d'innovació en el marc del model d'investigació: el model d'acoblament bibliomètric, el model matemàtic ComplexPlot; el model matemàtic integral multifactorial; el model d'optimització d'acoblament micro i macrodimensional d'elements finits, i el model d'avaluació d'optimització de la gestió de projectes va dominar del mètode de l'entropia. El sistema d'investigació teòrica supera la interferència de la discreció de l'objecte d'investigació, la complexitat i els factors d'influència incerts i realitza la solidesa de l'avaluació i la millora. El sistema d'investigació teòrica supera la interferència de la discreció de l'objecte d'investigació, la complexitat i els factors d'influència incerts i aconsegueix la solidesa de l'avaluació i la millora. Així mateix, millora àmpliament la resistència del model als factors naturals, humans, accidentals i incerts i el problema de la interferència externa de les emergències. Finalment, el sistema va formar un conjunt complet de sistemes de models d'optimització de prevenció i control conjunts madurs i va aconseguir els objectius i enfocaments de la investigació. El valor de la investigació d'aquesta tesi: a) ompli el buit de la investigació en aquest camp. b) innova en una varietat de nous models teòrics d'investigació. c) resol els problemes de discreció, incertesa i interferència de factors externs en l'optimització de la topologia i l'optimització de la gestió de projectes. Les interferències dels factors externs de mutació i la sensibilitat de les emergències es compensen i corregeixen. d) La investigació millora la captura de dades discretes i l'escassetat de compensació del sistema d'anàlisi de programari Muntanya Carlo., [EN] At the heart of the global construction industry is the overuse of materials, especially non-renewable fossil energy raw materials. In this research direction, many researchers and designers have significantly reduced the proportion of materials and minimized the amount of design within the scope of research ideas and design specifications. Given whether the above measures can effectively reduce materials, several questions need to be further studied: a) In which stages of the life cycle of building materials are consumed more? b) How to use the most compelling scientific method to reduce the consumption of materials at the stage where materials are used the most? c) How to scientifically complete the material consumption optimization evaluation in the design stage under the influence of overcoming many discrete events and external influencing factors? d) In the construction stage, how to optimize the project management process to the greatest extent and achieve the most excellent material saving to ensure quality, safety and cost? e) How much material can be saved through design and project management optimization? f) What are the ultimate impact of the above research theoretical system and analysis data on the sustainable development of the construction industry? Through the investigation of relevant publications on the whole life cycle of the construction industry (chapter 2), the thesis finds that the design and construction stages are the key to effectively reducing material consumption. The main goal of this thesis is to solve the proposed optimization problems. By establishing a multi-dimensional research model framework and a systematic project management optimization model, the thesis reduces the weight of various components of the statically indeterminate bridge structure and realizes the lightweight optimization of the bridge structure. The thesis establishes several core theoretical innovation models in the research model framework: the bibliometric coupling model, ComplexPlot mathematical model; the multi-factor integral mathematical model; the multi-dimensional finite element micro and macro coupling optimization model, and the entropy weight method domino project management optimization evaluation model. The theoretical research system overcomes the interference of the research object's discreteness, complexity, and uncertain influencing factors and realizes the robustness of evaluation and improvement. It comprehensively improves the model's resistance to natural, human, accidental, and uncertain factors and the external interference problem of emergencies. Ultimately, the system formed a complete set of mature joint prevention and control optimization model systems and realized the research goals and paradigms. The research value of this thesis: a) fills the research gap in this field. b) innovates a variety of new theoretical research models. c) solves the problems of discreteness, uncertainty, and external factor interference in topology optimization and project management optimization. Compensation and correction are made for the interference of external mutation factors and the sensitivity of emergencies. d) The research improves the Monte Carlo software analysis system's discrete data capture and compensation shortage. In this thesis, various types of advanced project management methods and advanced construction schemes are applied in the case study, which provides a rich reference value for optimizing statically indeterminate bridges of the same type. For readers without extensive practical experience, there are some difficulties in understanding and applying the model. The reader needs to think carefully in combination with the case, which is also the insufficiency of this thesis., This research was supported by grants from ”BIA2017-85098-R” and “PID2020-117056RB-I00”.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

AHP-based software for students&apos, self-assessment of critical thinking capacity

  • Salas, Jorge
  • Sierra, Leonardo
  • Yepes, V.|||0000-0001-5488-6001
[EN] Students' capacity for eliciting valid and accurate assessment is crucial for their self-assessment skill. Despite the central role that self-assessment plays in current conceptions of formative and classroom assessment, little attention has been paid for measuring the students' ability for carrying out valid and accurate assessment. This ability, connected with critical thinking, can be evaluated by comparing a students¿ assessment to performance on tests. Recently, the consistency index has been proposed as a metric for measuring students¿ critical thinking capacity, affording the observation of poor performance in the judgment capacity of a sample of 23 civil engineering students. This stresses the need of improving this aspect of students¿ education, which is required not only as a transversal competence, but also for the attainment of effective self-assessment capacity. In our study, we present an educational software that implements the Analytic Hierarchy Process (AHP) method for providing students with self-assessment of their ability to issue consistent judgment, as well as for training their critical thinking capacity. This way we aim at making students aware of eventual lacks in their skill for valid and consistent assessment, as well as at giving them the opportunity of improving this aspect through self-assessment. The educational software embodies a three-step process, in which the self-assessment takes place in the last stage: first, the student is asked to carry out a conventional teacher assessment based on a set of criteria, which are then weighted by him/her through AHP without consistency control. Second, students are asked to turn on the software¿s consistency index control, which will reveal eventual inconsistencies, and accordingly revise his/her judgments until they are acceptable. Finally, the student is invited to self-assess his/her capacity to issue consistent judgment by analysing differences between their assessment with (step 2) and without (step 1) the aid of the consistency control, to reflect upon the differences between consistent and inconsistent assessment, and to think of potential causes driving to inconsistent judgment. The whole process can be performed by the students in the presented software, which serves as a platform for effective self-feedback and training of their assessment accuracy and critical thinking capacity., This research was made possible by the support of mgnesio and of the Academic Head of the Programme of Degree in Construction Engineering at the Universidad de La Frontera. The authors are grateful to the students of this program for taking part in this educational experimentation. The authors also acknowledge the financial support of the Spanish Ministry of Economy and Competitiveness, which was co-financed with FEDER funds (Project: BIA2017-85098-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

MS-ReRO and D-ROSE methods: Assessing relational uncertainty and evaluating scenarios risks and opportunities on multi-scale infrastructure systems

  • Salas, J.
  • Yepes, V.|||0000-0001-5488-6001
[EN] There is a growing interest in model-based decision support systems contributing to strategic planning. The application of these in the case of urban infrastructure planning requires methods specifically aimed at addressing the relational uncertainties arising from the complex, multi-scale, nature of this field. This study presents UPSS, a comprehensive urban planning support system integrating the generation of planning alternatives, the evaluation of alternatives under a set of relevant scenarios selected dynamically in a cognitive way, and the proposal of policies to accompany the planning alternative. For this purpose, UPSS integrates two novel methods. These deal respectively with the ex post identification of relevant scenarios for the evaluation of the vulnerability and resilience of the alternatives, and with the assessment of relational uncertainty. According to the risks and opportunities borne by the system, the process makes it possible to select an infrastructure plan to alleviate the problem of urban vulnerability, as well as a set of relational contracts for its proper implementation across the different governmental scales of the infrastructure system. The whole process is tested via a case study, in which USPP first proposes optimal urban infrastructure plans that contribute to ameliorate the problem of urban vulnerability in Spain, then evaluates the risks and opportunities attached to the planning alternatives, and finally presents sets of policy measures to accompany the implementation of the alternative selected., The authors acknowledge the financial support of the Spanish Ministry of Economy and Competitiveness, along with FEDER funding (Project: BIA2017-85098-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Life cycle assessment of composite footbridges in a postgraduate optimization course through a case study

  • Martínez-Muñoz, D.|||0000-0002-6906-3830
  • Martí Albiñana, José Vicente|||0000-0002-2435-4095
  • Yepes, V.|||0000-0001-5488-6001
  • López Desfilis, Vicente José|||0000-0003-2430-380X
[EN] This paper describes how, through a case study, the life cycle assessment methodology is introduced in a postgraduate course. This case study is carried out within the framework of the predictive models of optimization of concrete structures subject of the master s degree in concrete engineering. This course introduces students to methods like the optimization of structures through the application of algorithms, and other concepts like multi-criteria decision making, design of experiments, and methods of prediction and regression. In this case study, the life cycle assessment of a simply supported 28 m span length mixed footbridge is carried out. The section is composed of a metal beam that supports a concrete slab, both elements are joined by shape connectors. The geometric definition is carried out applying an optimization algorithm. To carry out the analysis, the students will use the Ecoinvent database, and must make different hypothesis about the scenarios used for the procedures. As a result of applying logic to solve a case study using specific software and deducing the impact of a construction; this activity will help students to acquire different transversal competencies, such as ethical and environmental responsibility, knowledge of contemporary problems, critical thinking, and specific instrumental use, all of them framed within the institutional project of the Universitat Politècnica de València. This paper will introduce future studies related to the life cycle assessment of footbridges, not only from an energetic and environmental point of view but also an economic and social one., The authors acknowledge the support for the Ministry of Economy and Company and FEDER funding (Project BIA2017-85098-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Life cycle sustainability assessment for multi-criteria decision making in bridge design: A review

  • Navarro -Martinez, Ignacio Javier
  • Martínez-Muñoz, D.|||0000-0002-6906-3830
  • Yepes, V.|||0000-0001-5488-6001
  • Penadés-Plà, Vicent
  • Rempling, Rasmus
[EN] Sustainable design of infrastructures has become a major matter of study since the recent establishment of the Agenda 2030. This paper provides a systematic literature review on the use of multi-criteria decision making techniques used so far for the sustainable design of bridges. Special attention is put as well on how the reviewed studies assess the sustainable performance of bridge designs along their life cycle from the economic, the environmental and the social perspective. Although SAW and AHP are recurrently used in the sustainable assessment of bridges, the analysis of the most recent articles show that the application of TOPSIS and PROMETHEE techniques are gaining increasing relevance for such purpose. Most of the studies focus on the research of the construction and the maintenance stage of bridges. However, a need for further analysis is identified when it comes to the assessment of the impacts resulting from the End of Life cycle stage of bridges from a sustainable point of view. The use of intuitionistic and neutrosophic logic have been detected as emerging alternatives to the fuzzy approach of decision making problems., This study was funded by the Spanish Ministry of Economy and Competitiveness, along with FEDER funding (DIMALIFE Project BIA2017-85098-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Engineering and architecture postgraduate student&apos, s perceptions on sustainable design

  • Navarro -Martinez, Ignacio Javier
  • Yepes, V.|||0000-0001-5488-6001
  • Sánchez-Garrido, Antonio J.
[EN] The construction sector is one of the principal contributors to the actual levels of environmental stress, but is also recognised as an essential sector to promote human well-being, access to education or poverty eradication through the development of infrastructures and services. Therefore, since the recent establishment of the Sustainable Development Goals in 2015, architects and civil engineers have emerged as key actors for the sustainable future to which we all aspire. However, the complexity of sustainability claim for fundamental changes in current university curricula to educate professionals who can meet such challenge. Conventional university courses in engineering and architecture fall usually short in providing a holistic education where the students adequately perceive the relevance of considering not only the functional requirements of their designs, but also their social and environmental consequences. The present communication aims to provide an assessment tool to detect the main gaps in the education of engineers and architects based on the post-graduate students¿ perceptions of sustainable design. A survey is conducted on the students from the postgraduate courses ¿Models of prediction and optimization of concrete structures¿ from the Master¿s degree in Concrete Engineering, and ¿Innovation Management in the Construction Sector¿ from the Master's Degree in Planning and Management in Civil Engineering, both taught at the Polytechnic University of Valencia. The consistency of the responses is evaluated objectively based on the Analytical Hierarchy Process method, thus bringing to light the educational fields where special efforts shall be put when adapting university curricula towards the education on sustainability., The authors acknowledge the financial support of the Spanish Ministry of Economy and Competitiveness, which was co-financed with FEDER funds (Project: BIA2017-85098-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Sustainability life cycle design of bridges in aggressive environments considering social impacts

  • Navarro -Martinez, Ignacio Javier
  • Yepes, V.|||0000-0001-5488-6001
  • Martí Albiñana, José Vicente|||0000-0002-2435-4095
[EN] The establishment of the Sustainable Development Goals in 2015 claims for a deep paradigm shift in the way infrastructure structures are conceived. The evaluation of the impacts derived from the con- struction, the service and the end-of-life stages of an infrastructure is consequently in the spotlight of the research community. Being the construction sector as one of the main stressors of the environment, great attention has been recently paid to the structural design from the economic and the environmental point of view. However, sustainability requires to consider the social dimension as well. The evaluation of the social impacts of products is still at a very early stage of development, so the inclusion of social aspects in the design of structures is often overlooked. In this study, a comparison of life cycle assess- ment results is conducted on seven different design alternatives for a bridge in a coastal environment. Two approaches are followed: the first approach considers the economic and the environmental aspects of each design and the second approach includes the several social impacts specifically developed for the assessment of infrastructures. These social impacts account for four stakeholders, namely workers, consumers, local community and society. Results show that the inclusion of social aspects shall lead to different preferred options when compared with conventional, two-dimensional approaches. Here, the design with silica fume added concrete performs 11% better from a sustainability point of view when compared with the best solution resulting from a conventional assessment., The authors acknowledge the financial support of the Spanish Ministry of Economy and Competitiveness, along with FEDER funding (Project: BIA2017-85098-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Optimization of reinforced concrete building frames with automated grouping of columns

  • Boscardin, J.T.
  • Kripka, M.
  • Yepes, V.|||0000-0001-5488-6001
[EN] In structural design, it is common practice to adopt the same cross-section dimensions for a group of elements. This procedure is mainly for practical and aesthetic reasons, as well as to reduce labour costs, but it also has a positive effect of reducing the number of variables, which simplifies the usual trial and error design process. On the other hand, the total materials cost obtained is closely related to this grouping. Based on this, the present work aims to minimize the cost of reinforced concrete plane frames considering the automated grouping of columns. To achieve this objective, an optimization software was developed by the association of matrix structural analysis, dimensioning and optimization. The sections dimensions, the area of steel and the concrete strength of beams and columns were taken as design variables. For a given maximum number of groups, the optimum grouping and the corresponding values to design variables are obtained. The strategy proposed in this paper to obtain the grouping reduces significantly the number of infeasible candidate solutions during the search process and avoid the proposition of unrealistic designs. For the optimization, a variant of the Harmony Search method was adopted. Some structures were analyzed in order to validate the application of the proposed formulation, as well as to verify the influence of the grouping of elements on the final results. In these structures, it was possible to observe a significant additional reduction in the total cost when automated grouping is performed regarding a uniform grouping, even when a small number of groups is considered. For the 20-floor building frame analyzed, the cost reduction from uniform to automated grouping varied from 5.53 to 7.35%. The influence of the concrete strength on optimal results was also investigated, indicating a cost reduction of 9.74% from best (40 MPa) to worst case (20 MPa). In general, it can be concluded that, when applied in conjunction with the usual design variables, the proposed procedure can enable a significant additional economy, without affecting the structural safety., The authors acknowledge the financial support of the Brazilian Council for Scientific and Technological Development CNPq (Grant: 302736/2017-4) and of the Spanish Ministry of Economy and Competitiveness, along with FEDER funding (Project: BIA2017-85098-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Robust decision-making design for sustainable pedestrian concrete bridges

  • Penadés-Plà, Vicent
  • Yepes, V.|||0000-0001-5488-6001
  • García-Segura, Tatiana|||0000-0002-7059-0566
[EN] In recent years, there is a trend toward the construction of sustainable structures. The goal of sustainability in structures involves several criteria that are normally opposed, leading to a decision-making process. In this process, there is a subjective portion that cannot be eliminated, such as qualitative criteria assessment of and assigning criteria importance. In these cases, decision-makers become part of the decision-making process, assessing it according to their preferences. In this work, a methodology to reduce the participation of decision-makers in achieving the goal of sustainability in structures is proposed. For this purpose, principal component analysis, kriging-based optimization, and the analytical hierarchy process are used. Principal component analysis is used to reduce the complexity of the problem according to the highly correlated criteria. Kriging-based optimization obtains sustainable solutions depending on all the perspectives of sustainability. Finally, the analytical hierarchy process is applied to reduce the optimized sustainable solutions according to the decision-maker's views. This methodology is applied a continuous concrete box-girder pedestrian bridge deck to reach sustainable designs. This methodology allows a reduction of the complexity of the decision-making problem and also obtains sustainable robust solutions., The authors acknowledge the financial support of the Spanish Ministry of Economy and Competitiveness, along with FEDER funding (Project: BIA2017-85098-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Case study of the life cycle assessment of a ventilated façade in a certain climatic zone of Spain in a postgraduate course

  • Ata-Ali, N.
  • Pons, J.J.
  • Martí Albiñana, José Vicente|||0000-0002-2435-4095
  • Yepes, V.|||0000-0001-5488-6001
[EN] This paper deals with a case study aimed for students of the "Advanced Methods and Technology in Construction" subject, taught in the Master's Degree in Planning and Management in Civil Engineering (MUPGIC) of the Universitat Politècnica de València. In this course advanced construction procedures are taught. This article presents the case study of a ventilated façade, which has a constructive system that makes it aesthetically attractive and energetically efficient. The case study, for the students, consists in the life cycle assessment of a certain ventilated façade type in two different climatic zones of Spain: Valencia and Ávila, using the Ecoinvent database. Students must take into account that both cities have a very different climate and make the decision to change some of the constructive elements depending on the results. Students will learn to understand and apply advanced constructive procedures. Furthermore, they will acquire transversal competencies such as the decision-making, and problem analysis, and solving capacities, considering the ethical, environmental and professional responsibilities. This article is the preamble for future studies related to the life cycle assessment of a construction or unit from it, considering both an economic and energetic point of view as well as an economic and social one., The authors acknowledge the support for the Ministry of Economy and Company and FEDER funding (Project BIA2017-85098-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The buttressed walls problem: An application of a hybrid clustering particle swarm optimization algorithm

  • Garcia, Jose
  • Martí Albiñana, José Vicente|||0000-0002-2435-4095
  • Yepes, V.|||0000-0001-5488-6001
[EN] The design of reinforced earth retaining walls is a combinatorial optimization problem of interest due to practical applications regarding the cost savings involved in the design and the optimization in the amount of CO2 emissions generated in its construction. On the other hand, this problem presents important challenges in computational complexity since it involves 32 design variables; therefore we have in the order of 10^20 possible combinations. In this article, we propose a hybrid algorithm in which the particle swarm optimization method is integrated that solves optimization problems in continuous spaces with the db-scan clustering technique, with the aim of addressing the combinatorial problem of the design of reinforced earth retaining walls. This algorithm optimizes two objective functions: the carbon emissions embedded and the economic cost of reinforced concrete walls. To assess the contribution of the db-scan operator in the optimization process, a random operator was designed. The best solutions, the averages, and the interquartile ranges of the obtained distributions are compared. The db-scan algorithm was then compared with a hybrid version that uses k-means as the discretization method and with a discrete implementation of the harmony search algorithm. The results indicate that the db-scan operator significantly improves the quality of the solutions and that the proposed metaheuristic shows competitive results with respect to the harmony search algorithm., The first author was supported by the Grant CONICYT/FONDECYT/INICIACION/11180056, the other two authors were supported by the Spanish Ministry of Economy and Competitiveness, along with FEDER funding (Project: BIA2017-85098-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Study of alternatives for the design of sustainable low-income housing in Brazil

  • Bianchi, Pollyanna Fernandes
  • Vitorio, Paulo Cezar Jr.
  • Kripka, Moacir
  • Yepes, V.|||0000-0001-5488-6001
[EN] Despite insufficient housing facilities, particularly in developing countries, construction systems are generally selected intuitively or based on conventional solutions sanctioned by practice. The present study aims to evaluate different options for the design of low-income housing in Brazil by integrating the life cycle assessment (LCA) into the decision-making process. To achieve this objective, three single-family projects with different construction systems were selected and analyzed. The most sustainable design was selected through the analytic hierarchy process (AHP). The considered parameters, which were obtained through a survey with professionals and customers, included cost, environmental impact, thermal comfort, construction time, and cultural acceptance. LCA and life cycle cost assessment (LCCA) were performed with the frontier¿s system considering the cradle-to-gate cycle, which included the extraction of raw materials, manufacture of building materials, and housing construction. The projects were modelled using Autodesk Revit software with the Tally application for LCA evaluation. The results indicated that light steel frame houses present a better behavior than other conventional alternatives, and the integration of building information modelling with LCA and LCCA in the design phase can lead to the development of more sustainable houses., The authors acknowledge the financial support of Universidade de Passo Fundo to the first author, the financial support of the Spanish Ministry of Economy and Competitiveness, along with FEDER funding (Project: BIA2017-85098-R) to the second author, and the financial support of the Brazilian National Council for Scientific and Technological Development (CNPq) to the last author.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Social sustainability criteria in public-work procurement: An international perspective

  • Montalbán-Domingo, Laura|||0000-0002-9506-0350
  • García-Segura, Tatiana|||0000-0002-7059-0566
  • Sanz-Benlloch, Amalia|||0000-0001-8051-0649
  • Pellicer, Eugenio|||0000-0001-9100-0644
[EN] Scientific literature highlights the need to engage social sustainability more effectively in the construction industry through public procurement. Previous contributions have been focused on establishing strategies and defining guides to encourage and facilitate the inclusion of social criteria in public procurement. However, to reach effective results, the characterization of the current scenario needs to be clarified. With this aim, this research analyzes 451 tendering documents from 10 countries in terms of social sustainability. Three research questions are stated to characterize what the current main social criteria are, how these are defined, and what the differences and similarities are with respect to the inclusion of social criteria in tendering procedures at the international level. To analyze tendering documents, a quantitative content analysis that combines inductive and deductive approaches is developed. Descriptive statistics and statistical analysis based on correspondence analysis and the chi-square contingency table analysis are performed. The results show a lack of metrics to assess social sustainability objectively, the predominance of health and safety as the main social criteria that are included in public procurement, and the importance of the contract size in the number of social categories considered in procurement procedures. However, the main result of this research is focused on showing the important role that the variable "country" plays when the behavior regarding the inclusion of social sustainability is compared at the international level since significant differences are found between Anglo-Saxon and Spanish-speaking countries. Policies should be implemented to promote the use of social criteria and metrics in the award of projects and in the evaluation and monitoring of social performance in the construction industry. (C) 2018 Elsevier Ltd. All rights reserved., The authors acknowledge the financial support of the Spanish Ministry of Economy and Competitiveness, along with FEDER funding (Project: BIA2017-85098-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Buckling Analysis and Stability of Compressed Low-Carbon Steel Rods in the Elastoplastic Region of Materials

  • Partskhaladze, G.
  • Mshvenieradze, I.
  • Medzmariashvili, E.
  • Chavleshvili, G.
  • Yepes, V.|||0000-0001-5488-6001
  • Alcalá-González, Julián|||0000-0003-1376-8441
[EN] This paper presents new approaches for solving a problem of the stability of compressed rods in the elastoplastic working region of materials. It is known that the columns of buildings, supports of engineering devices, drill rods of oil, and gas extraction industry may be subjected to significant risk of stability loss. Nowadays, there are design methods based on test results defining the relations (e.g., critical stresses-slenderness) to avoid this risk due to stability loss, but the precision and limits of definition are not always known. The main objectives of the study were to develop new approaches that would allow specifying the values of critical stresses of compressed elements beyond the proportional limit. The problem of stability of the compressed elements in the elastoplastic region was studied according to the stability theory. The authors suggested an original approach to the issue; in particular, the determination of values of the critical stresses and the finding of the points of the bifurcation were carried out by the tangent established by experimental results and by the approximation of the so-called double modulus. Comparative analysis showed the advantage of the proposed approach, particularly that the new critical curves were located below the curves of Engesser-Karman and Shanley and above the critical curves established by building codes. A new approach for the determination of critical stresses in the elastoplastic region was developed through which the structural reliability and economic efficiency was increased by almost 12% compared to the existing approaches., This research was financially supported by the Erasmus Mundus Action 2 Project Electra: Enhancing Learning in ENPI Countries through Clean Technologies and Research related Activities (project: ELEC1400294) and the Spanish Ministry of Economy and Competitiveness, along with FEDER funding (project: BIA2017-85098-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Social Sustainability in Delivery and Procurement of Public Construction Contracts

  • Montalbán-Domingo, Laura|||0000-0002-9506-0350
  • García-Segura, Tatiana|||0000-0002-7059-0566
  • Sanz-Benlloch, Amalia|||0000-0001-8051-0649
  • Pellicer, Eugenio|||0000-0001-9100-0644
[EN] Boosting sustainability in public construction procurement implies new challenges associated with incentivizing integrated approaches and the inclusion of sustainability criteria in tendering procedures. Thus, the choice of project-delivery method and procurement procedure is a key decision to ensure project success for sustainable outcomes. This study focused on the social dimension of sustainability and analyzed 451 tendering documents from 10 countries to assess the influence of procurement procedures and delivery methods on the inclusion of social criteria in public construction procurement. Content analysis, descriptive statistics, and logistic regression were applied. The results show the international trends in delivery methods and procurement procedures. Country and contract size were found to be the most influential variables for the inclusion of social criteria in tendering procedures. There were no significant differences between project-delivery methods and between procurement procedures with respect to the inclusion of social criteria. However, criteria associated with employment and cultural heritage were mainly considered in traditional delivery methods, whereas professional ethics and cultural heritage were associated with the lowest price procurement procedures. Finally, subjective methods were predominantly used to assess social sustainability., The authors acknowledge the financial support of the Spanish Ministry of Economy and Competitiveness, along with FEDER funding (Project BIA2017-85098-R) and the Valencian Regional Government (Project GV/2018//085). Furthermore, the valuable commentaries and suggestions of three anonymous reviewers are highly appreciated.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Comparative Life Cycle Analysis of Concrete and Composite Bridges Varying Steel Recycling Ratio

  • Martínez-Muñoz, D.|||0000-0002-6906-3830
  • Martí Albiñana, José Vicente|||0000-0002-2435-4095
  • Yepes, V.|||0000-0001-5488-6001
[EN] Achieving sustainability is currently one of the main objectives, so a consensus between different environmental, social, and economic aspects is necessary. The construction sector is one of the main sectors responsible for environmental impacts worldwide. This paper proposes the life cycle assessment (LCA) and comparison of four bridge deck alternatives for different span lengths to determine which ones are the most sustainable solutions. The ReCiPe method is used to conduct the life cycle analysis, by means of which the impact value is obtained for every alternative and span length. The Ecoinvent 3.3 database has been used. The life cycle has been divided into four phases: manufacturing, construction, use and maintenance, and end of life. The associated uncertainties are considered, and the results are shown in both midpoint and endpoint approaches. The results of our research show that for span lengths less than 17 m, the best alternative is the prestressed concrete solid slab. For span lengths between 17 and 25 m, since the box-girder solution is not used, then the prestressed concrete lightened slab is the best alternative. For span lengths between 25 and 40 m, the best solution depends on the percentage of recycled structural steel. If this percentage is greater than 90%, then the best alternative is the composite box-girder bridge deck. However, if the percentage is lower, the cleanest alternative is the prestressed concrete box-girder deck. Therefore, the results show the importance of recycling and reusing structural steel in bridge deck designs., This research was funded by Spanish Ministry of Economy and Business (Project: BIA201785098-R), the Spanish Ministry of Science and Innovation (Project: PID2020-117056RB-I00), along with FEDER funding and Spanish Ministry of Science, Innovation and Universities for David MartinezMunoz's University Teacher Training Grant (FPU-18/01592).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Social life cycle assessment of concrete bridge decks exposed to aggressive environments

  • Navarro -Martinez, Ignacio Javier
  • Yepes, V.|||0000-0001-5488-6001
  • Martí Albiñana, José Vicente|||0000-0002-2435-4095
[EN] Sustainable design of structures includes environmental and economic aspects; social aspects throughout the life cycle of the structure, however, are not always adequately assessed. This study evaluates the social contribution of a concrete bridge deck. The social performance of the different design alternatives is estimated taking into account the impacts derived from both the construction and the maintenance phases of the infrastructure under conditions of uncertainty. Uncertain inputs related to social context are treated through Beta-PERT distributions. Maintenance needs for the different materials are estimated by means of a reliability based durability evaluation. Results show that social impacts resulting from the service life of bridges are not to be neglected in sustainability assessments of such structures. Designs that minimize maintenance operations throughout the service life, such as using stainless steel rebars or silica fume containing concretes, are socially preferable to conventional designs. The results can complement economic and environmental sustainability assessments of bridge structures., The authors acknowledge the financial support of the Spanish Ministry of Economy and Competitiveness, along with FEDER funding (Project: BIA2017-85098-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Accelerated optimization method for low-embodied energy concrete box-girder bridge design

  • Penadés-Plà, Vicent
  • García-Segura, Tatiana|||0000-0002-7059-0566
  • Yepes, V.|||0000-0001-5488-6001
[EN] Structural optimization is normally carried out by means of conventional heuristic optimization due to the complexity of the structural problems. However, the conventional heuristic optimization still consumes a large amount of time. The use of metamodels helps to reduce the computational cost of the optimization and, along these lines, kriging-based heuristic optimization is presented as an alternative to carry out an accelerated optimization of complex problems. In this work, conventional heuristic optimization and kriging-based heuristic optimization will be applied to reach the optimal solution of a continuous box-girder pedestrian bridge of three spans with a low embodied energy. For this purpose, different penalizations and different initial sample sizes will be studied and compared. This work shows that kriging-based heuristic optimization provides results close to those of conventional heuristic optimization using less time. For the sample size of 50, the best solution differs about 2.54% compared to the conventional heuristic optimization, and reduces the computational cost by 99.06%. Therefore, the use of a kriging model in structural design problems offers a new means of solving certain structural problems that require a very high computational cost and reduces the difficulty of other problems., The authors acknowledge the financial support of the Spanish Ministry of Economy and Competitiveness, along with FEDER funding (Project: BIA2017-85098-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Neutrosophic Completion Technique for Incomplete Higher-Order AHP Comparison Matrices

  • Navarro -Martinez, Ignacio Javier
  • Martí Albiñana, José Vicente|||0000-0002-2435-4095
  • Yepes, V.|||0000-0001-5488-6001
[EN] After the recent establishment of the Sustainable Development Goals and the Agenda 2030, the sustainable design of products in general and infrastructures in particular emerge as a challenging field for the development and application of multicriteria decision-making tools. Sustainability-related decision problems usually involve, by definition, a wide variety in number and nature of conflicting criteria, thus pushing the limits of conventional multicriteria decision-making tools practices. The greater the number of criteria and the more complex the relations existing between them in a decisional problem, the less accurate and certain are the judgments required by usual methods, such as the analytic hierarchy process (AHP). The present paper proposes a neutrosophic AHP completion methodology to reduce the number of judgments required to be emitted by the decision maker. This increases the consistency of their responses, while accounting for uncertainties associated to the fuzziness of human thinking. The method is applied to a sustainable-design problem, resulting in weight estimations that allow for a reduction of up to 22% of the conventionally required comparisons, with an average accuracy below 10% between estimates and the weights resulting from a conventionally completed AHP matrix, and a root mean standard error below 15%., The authors acknowledge the financial support of the Spanish Ministry of Economy and Business, along with FEDER funding (DIMALIFE Project: BIA2017-85098-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Multi-criteria decision making applied to engineering education. Economic-environmental sustainability in the structure of single-family homes

  • Sánchez-Garrido, Antonio J.
  • Navarro -Martinez, Ignacio Javier
  • Yepes, V.|||0000-0001-5488-6001
[EN] This paper is based on the contents of the postgraduate course "Prediction and optimization models of concrete structures", taught in the Master of Concrete Engineering at the Polytechnic University of Valencia, in which civil engineering students are taught the various techniques of multi-criteria assessment, with a sustainable approach, applied to the optimal design of structures. This allows the student to compare complex aspects with generally contradictory objectives that characterize sustainability under criteria of economic, environmental and social efficiency, among others. Construction companies usually focus on cost optimization during the construction stage of structures that are currently not sufficient to meet the growing social demands of the 21st century world, needing to balance the criteria that support sustainability. The construction sector represents a relevant percentage of the total CO2 emissions, being responsible for a great part of the environmental impacts, which is enough reason for the European Union policies to be more and more oriented to the reduction of these emissions. This document presents a case study on a research being carried out by the faculty and students who are part of the research team, comparing two different construction alternatives, namely "traditional" in-situ concrete versus "prefabricated" with blocks and plates of Ytong. The aim is to find the structural optimum of an urban single-family house from the economic and environmental point of view throughout its life cycle. The objective is to find the structural optimum of an urban single-family house from the economic and environmental point of view throughout its life cycle. An analysis of indicators including the production phase, construction, the use and maintenance stage and the end of life has been carried out. The environmental impacts throughout the life cycle of the alternatives have been evaluated on the basis of the Ecoinvent 3.3 environmental database, using the ReCiPe impact assessment methodology. Finally, to evaluate the different alternatives, we have applied the multiple attribute method TOPSIS, based on distance to establish the order of preference by similarity with the ideal solution. Our findings show that the most economical solution in each phase is not the most environmentally efficient. For sustainability-based decision making that does not lead to erroneous results a balance must be sought between all dimensions, including not only monetary aspects in the structure design process., The authors acknowledge the support received from the Ministry of Economy and Business and the FEDER funding (Research Project BIA2017-85098-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Life cycle assessment for sustainable design of railway infrastructures. A case study application in education

  • Pons, J.J.
  • Yepes, V.|||0000-0001-5488-6001
  • Salvador Zuriaga, Pablo|||0000-0002-7824-0368
  • Insa Franco, Ricardo|||0000-0002-6655-4458
[EN] The following article deals with the introduction of the life cycle assessment applied to design sustainable infrastructure. Particularly, it is applied in the Railways course of the Bachelor's Degree in Civil Engineering from the Universitat Politècnica de València, on which students are introduced to the construction, operation and maintenance of railway infrastructures. Traditionally, for the design of any infrastructure, only economic criteria have been considered, mainly the initial construction cost. However, since they last over time, the cost through the entire life cycle, from the production of materials to the demolition of the infrastructure itself, must be analyzed. Additionally, due to the climatic and social challenges caused by global warming, environmental and social criteria are being implemented along with the economic ones to choose design solutions for infrastructures. Using the Ecoinvent database, students will learn about the different impacts caused throughout the life cycle of a railway track, making decisions about its design, and acquiring transversal competencies such as the environmental and ethic responsibility as well as the knowledge of contemporary problems and critical thinking. This article introduces future studies about the life cycle assessment and its applications for the sustainable design of railway infrastructures., The authors acknowledge the financial support of the Spanish Ministry of Economy and Competitiveness, along with FEDER funding (Project: BIA2017-85098-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Remote teaching in construction engineering management during COVID-19

  • Martínez-Muñoz, D.|||0000-0002-6906-3830
  • Martí Albiñana, José Vicente|||0000-0002-2435-4095
  • Yepes, V.|||0000-0001-5488-6001
[EN] This paper describes the impact of the change from face-to-face classes to non-face-to-face classes with students of a postgraduate course at the Universitat Politècnica de València. This study is carried out in the subjects of installation, organization and quality assurance in construction and construction procedures of both degree in public works engineering and civil engineering. This course develops the student's skills to integrate into the studies department of a construction company, as Site Manager or Production Director, from a journey through the different phases of the project-construction process. As part of this topic, the methods of scheduling activities on site are discussed. In the traditional face to-face method, several problems are solved, requiring that students have previously learned programming techniques: arrow networks, precedence networks, and how to apply the PERT method to statistically obtain the probability of completion of a building or the completion of activities related. Due to the current situation of the pandemic caused by COVID-19, face-to-face teaching has changed virtual classes in a very short time. This has required a radical shift towards distance education. This paper explains how this change has been made, what new methods have been used to teach the contents corresponding to the scheduling of assignments, and what the students' perception has been. The quality of the education received and the difficulties encountered in obtaining the knowledge and skills attributed to this subject are analyzed., The authors acknowledge the support for the Ministry of Economy and Company and FEDER funding (Project BIA2017-85098-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Life Cycle Cost Assessment of Preventive Strategies Applied to Prestressed Concrete Bridges Exposed to Chlorides

  • Navarro -Martinez, Ignacio Javier
  • Yepes, V.|||0000-0001-5488-6001
  • Martí Albiñana, José Vicente|||0000-0002-2435-4095
[EN] This paper applies Life Cycle Assessment methodology to aid in the decision making to select the preventive measure against chloride corrosion in concrete structures that works best for the socio-economic context of the structure. The assumed model combines the concepts of Life Cycle Cost Analysis and Social Life Cycle Analysis to assess the impacts on users derived from the maintenance activities associated with each alternative analyzed in terms of economic costs. The model has been applied to a prestressed concrete bridge to obtain a preventive measure that can reduce the total costs incurred over the period of analysis by up to 58.5% compared to the cost of the current solution., The authors acknowledge the financial support of the Spanish Ministry of Economy and Competitiveness, along with FEDER funding (Project: BIA2017-85098-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Selection of Sustainable Short-Span Bridge Design in Brazil

  • Kripka, Moacir
  • Milani, Cleovir José
  • Yepes, V.|||0000-0001-5488-6001
[EN] Owing to the elevated cost of bridges, especially when compared to the cost of roads, their rational design and material selection are fundamental properties to consider when aiming to reduce the environmental impacts and lengthen the lifespan of the bridge. Especially in developing countries, the construction of new bridges (mainly short spanned) is still a necessity, and it is important that these new structures are designed according to all the sustainability parameters, instead of being based only on the construction cost. Thus, the present work aims to study short-span bridges by integrating environmental assessments into the decision-making process. To achieve this goal, three short-span bridge designs, proposed by public organizations in Brazil, are evaluated: Precast concrete bridge, mixed concrete/steel bridge, and timber bridge. In order to allow comparison, the same location and span are considered. The structures are evaluated considering the following quantitative aspects: Cost of construction, assembly and material transportation, lifespan, and environmental impact (measured by the global warming potential, GWP). In addition, some more subjective factors are considered, such as the architecture (layout and appearance) and the user¿s sensation of security. The selection is made by the adoption of two multi-criteria decision-making methods (analytic hierarchy process or AHP and Vikor). The results obtained with both methods indicate the mixed concrete/steel bridge as the most adequate alternative. Some additional analysis is performed in order to evaluate the influence of the qualitative aspects, as well as to study the importance of the variations in the costs on the results., The authors acknowledge the financial support of the Brazilian National Council for Scientific and Technological Development (CNPq) to the first author, the financial support of the Spanish Ministry of Economy and Competitiveness, along with FEDER funding (Project: BIA2017-85098-R) to the second author, and the support of the Brazilian Coordination for the Improvement of Higher Education Personnel (CAPES) to the third author.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A Hybrid k-Means Cuckoo Search Algorithm Applied to the Counterfort Retaining Walls Problem

  • García, José
  • Yepes, V.|||0000-0001-5488-6001
  • Martí Albiñana, José Vicente|||0000-0002-2435-4095
[EN] The counterfort retaining wall is one of the most frequent structures used in civil engineering. In this structure, optimization of cost and CO2 emissions are important. The first is relevant in the competitiveness and efficiency of the company, the second in environmental impact. From the point of view of computational complexity, the problem is challenging due to the large number of possible combinations in the solution space. In this article, a k-means cuckoo search hybrid algorithm is proposed where the cuckoo search metaheuristic is used as an optimization mechanism in continuous spaces and the unsupervised k-means learning technique to discretize the solutions. A random operator is designed to determine the contribution of the k-means operator in the optimization process. The best values, the averages, and the interquartile ranges of the obtained distributions are compared. The hybrid algorithm was later compared to a version of harmony search that also solved the problem. The results show that the k-mean operator contributes significantly to the quality of the solutions and that our algorithm is highly competitive, surpassing the results obtained by harmony search., The first author was supported by the Grant CONICYT/FONDECYT/INICIACION/11180056, the other two authors were supported by the Spanish Ministry of Economy and Competitiveness, along with FEDER funding (Project: BIA2017-85098-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Robust Design Optimization for Low-Cost Concrete Box-Girder Bridge

  • Penadés-Plà, Vicent
  • García-Segura, Tatiana|||0000-0002-7059-0566
  • Yepes, V.|||0000-0001-5488-6001
[EN] The design of a structure is generally carried out according to a deterministic approach. However, all structural problems have associated initial uncertain parameters that can differ from the design value. This becomes important when the goal is to reach optimized structures, as a small variation of these initial uncertain parameters can have a big influence on the structural behavior. The objective of robust design optimization is to obtain an optimum design with the lowest possible variation of the objective functions. For this purpose, a probabilistic optimization is necessary to obtain the statistical parameters that represent the mean value and variation of the objective function considered. However, one of the disadvantages of the optimal robust design is its high computational cost. In this paper, robust design optimization is applied to design a continuous prestressed concrete box-girder pedestrian bridge that is optimum in terms of its cost and robust in terms of structural stability. Furthermore, Latin hypercube sampling and the kriging metamodel are used to deal with the high computational cost. Results show that the main variables that control the structural behavior are the depth of the cross-section and compressive strength of the concrete and that a compromise solution between the optimal cost and the robustness of the design can be reached., This research was funded by the Ministerio de Economia, Ciencia y Competitividad and FEDER funding grant number [BIA2017-85098-R].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Neutrosophic multi-criteria evaluation of sustainable alternatives for the structure of single-family homes

  • Sánchez-Garrido, Antonio J.
  • Navarro -Martinez, Ignacio Javier
  • Yepes, V.|||0000-0001-5488-6001
[EN] This paper proposes a methodology for the assessment of the sustainability among three different structural design alternatives for a single-family home. The response associated with each alternative has been measured using 43 indicators considering all stages of the life cycle. A decision-making model is carried out on the basis of a neutrosophic group analytical hierarchy process (NAHP-G) capturing the maximum information in terms of credibility, inconsistency and indetermination. The 9 criteria on which an expert group intervenes are finally evaluated using VIKOR. The results show that non-probabilistic uncertainties influence the weights obtained, with maximum deviations in the criteria between 11.91% and 4.95%, if compared to conventional AHP. From the methodology it is obtained that the technological alternative with non-conventional concrete performs best in sustainable terms. Although the industrialized option has less environmental impact, only the simultaneous consideration of the economic, environmental and social pillars in a project will lead to appropriate sustainable designs., The authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness and FEDER funding (Project: BIA2017-85098-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A Review of Multi-Criteria Assessment of the Social Sustainability of Infrastructures

  • Sierra-Varela, Leonardo Andres
  • Yepes, V.|||0000-0001-5488-6001
  • Pellicer, Eugenio|||0000-0001-9100-0644
[EN] Nowadays multi-criteria methods enable non-monetary aspects to be incorporated into the assessment of infrastructure sustainability. Yet evaluation of the social aspects is still neglected and the multi-criteria assessment of these social aspects is still an emerging topic. Therefore, the aim of this article is to review the current state of multi-criteria infrastructure assessment studies that include social aspects. The review includes an analysis of the social criteria, participation and assessment methods. The results identify mobility and access, safety and local development among the most frequent criteria. The Analytic Hierarchy Process and Simple Additive Weighting methods are the most frequently used. Treatments of equity, uncertainty, learning and consideration of the context, however, are not properly analyzed yet. Anyway, the methods for implementing the evaluation must guarantee the social effect on the result, improvement of the representation of the social context and techniques to facilitate the evaluation in the absence of information., This research was funded by the Government of Chile under the Doctoral Fellowship Program Abroad (grant CONICYT-2015/72160059), the project DIUFRO DI14-0096 and the Spanish Ministry of Economy and Competitiveness along with FEDER funding (Projects BIA2014-56574-R and BIA2017-85098-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A Review of Multicriteria Assessment Techniques Applied to Sustainable Infrastructure Design

  • Navarro -Martinez, Ignacio Javier
  • Yepes, V.|||0000-0001-5488-6001
  • Martí Albiñana, José Vicente|||0000-0002-2435-4095
[EN] Given the great impacts associated with the construction and maintenance of infrastructures in both the environmental, the economic and the social dimensions, a sustainable approach to their design appears essential to ease the fulfilment of the Sustainable Development Goals set by the United Nations. Multicriteria decision-making methods are usually applied to address the complex and often conflicting criteria that characterise sustainability. The present study aims to review the current state of the art regarding the application of such techniques in the sustainability assessment of infrastructures, analysing as well the sustainability impacts and criteria included in the assessments. The Analytic Hierarchy Process is the most frequently used weighting technique. Simple Additive Weighting has turned out to be the most applied decision-making method to assess the weighted criteria. Although a life cycle assessment approach is recurrently used to evaluate sustainability, standardised concepts, such as cost discounting, or presentation of the assumed functional unit or system boundaries, as required by ISO 14040, are still only marginally used. Additionally, a need for further research in the inclusion of fuzziness in the handling of linguistic variables is identified., The authors acknowledge the financial support of the Spanish Ministry of Economy and Competitiveness, along with FEDER funding (Project no. BIA2017-85098-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Parametric study of concrete box-girder footbridges

  • Yepes, V.|||0000-0001-5488-6001
  • Alcalá-González, Julián|||0000-0003-1376-8441
  • García-Segura, Tatiana|||0000-0002-7059-0566
  • Pérez-López, E.
[EN] This paper presents a study of the parametric variability of post-tensioned concrete box-girder pedestrian bridges. SAMO2 algorithm is used for the parametric study. This algorithm combines SA with a mutation operator, to find the economic solutions. A span-length parametric study analyzes the characteristics for the best design of a three-span deck in which the main span ranges from 30 to 60 m. The depth and the number of strands were adjusted according to span length, while the thickness of the slabs presented the same optimum values in all cases. Results show that the amount of steel and volume of concrete per square meter of deck shows a good correlation with the main span length. This study demonstrates that by increasing the main span length by one meter, the total cost per square meter of the deck increases by 6.38 euros on average. Thus, this paper shows the relationship between the span length and geometrical and steel variables to produce and build a cost-efficient pedestrian bridge., This research was financially supported by the Spanish Ministry of Economy and Competitiveness along with FEDER funding (Project BIA2014- 56574-R and Project BIA2017-85098-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Recycled versus non-recycled insulation alternatives: LCA analysis for different climatic conditions in Spain

  • Ata-Ali, N.
  • Penadés-Plà, V.
  • Martínez-Muñoz, D.|||0000-0002-6906-3830
  • Yepes, V.|||0000-0001-5488-6001
[EN] The construction sector represents more than 40% of energy consumption in the European Union, as well as one of the biggest causes of environmental impact. Therefore, this sector needs a great deal of intervention through policies that promote the energetic efficiency of the buildings. One of the most important structural components to reach this energetic efficiency is the facades. In this work, the facade ventilated is chosen due to its better thermal insulation behaviour. The environmental impact of the facade ventilated depends on the thermal insulation material. The goal of this paper is to evaluate the environmental impact of different ventilated facades according to their thermal insulation behavior. For this purpose, the life-cycle assessment is applied in ventilated facades with different materials in different locations. The materials studied are the rock wool, the natural cork and the recycled cork, and the locations considered are the different climatic areas of Spain. To reach a complete environmental assessment all the ventilated facades life-cycle is considered, from cradle to grave. To do this we use the Open LCA software with the Ecoinvent database with the ReCiPe method. The results show that the recycled cork is the thermal insulation with the lowest environmental impact regardless the location., The authors acknowledge the financial support of the Spanish Ministry of Economy and Business (Project: BIA2017-85098-R) and the Spanish Ministry of Science and Innovation (Project: PID2020-117056RB-I00), along with FEDER funding. In addition would also acknowledge the Spanish Ministry of Science, Innovation and Universities for David Martinez-Munoz University Teacher Training Grant (FPU-18/01592).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Optimización de puentes pretensados mediante la metodología de la superficie de respuesta, Optimization of prestressed concrete road bridges by the response surface methodology

  • Penadés-Plà, Vicent
  • Kripka, M.
  • Yepes, V.|||0000-0001-5488-6001
[ES] Los puentes son infraestructuras esenciales para mejorar la comunicación dentro de un territorio. La optimización constituye un proceso que permite obtener puentes de menor coste bajo ciertas restricciones. Debido a la complejidad de los problemas estructurales, la optimización matemática no es útil y se recurre a la optimización heurística debido a su mayor eficacia. En este trabajo se presenta una alternativa a la optimización heurística basada en los metamodelos. El procedimiento consiste en una reducción de los factores iniciales mediante el diseño de experimentos, reduciendo significativamente la complejidad del problema sin perder información. Posteriormente, se aplica la metodología de la superficie de respuesta para obtener el óptimo del problema. Este procedimiento se aplica a un tablero de un puente de losa maciza que cumpla todas las restricciones de las normativas., [EN] Bridges are essential infrastructures to improve communication in a region. Optimization is a process that can be used to obtain cheaper bridges under certain restrictions. Due to the complexity of the structural problems, mathematical optimization is not useful and heuristic optimization is used due its greater efficiency. This work presents an alternative to heuristic optimization based on metamodels. The process consists of reducing the initial factors by design of experiments, which significantly reduces the complexity of the problem without losing information. Then, response surface methodology is applied to obtain the optimum of the problem. This process is applied to a solid slab bridge deck that accomplish with all regulatory restrictions., Los autores agradecen la financiación del Ministerio de Economía y Competitividad, junto con los fondos FEDER (Proyecto: BIA2017-85098-R) y del Consejo Nacional de Desarrollo Científico y Tecnológico CNPq/Brasil (Proc. 302736/2017-4).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

VisualUVAM: A Decision Support System Addressing the Curse of Dimensionality for the Multi-Scale Assessment of Urban Vulnerability in Spain

  • Salas, Jorge
  • Yepes, V.|||0000-0001-5488-6001
[EN] Many-objective optimization methods have proven successful in the integration of research attributes demanded for urban vulnerability assessment models. However, these techniques suffer from the curse of the dimensionality problem, producing an excessive burden in the decision-making process by compelling decision-makers to select alternatives among a large number of candidates. In other fields, this problem has been alleviated through cluster analysis, but there is still a lack in the application of such methods for urban vulnerability assessment purposes. This work addresses this gap by a novel combination of visual analytics and cluster analysis, enabling the decision-maker to select the set of indicators best representing urban vulnerability accordingly to three criteria: expert¿s preferences, goodness of fit, and robustness. Based on an assessment framework previously developed, VisualUVAM affords an evaluation of urban vulnerability in Spain at regional, provincial, and municipal scales, whose results demonstrate the effect of the governmental structure of a territory over the vulnerability of the assessed entities., This research was funded by the Spanish Ministry of Economy and Competitiveness, along with FEDER, grant number Project: BIA2017-85098-R".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Sustainable Decision-Making Module: Application to Public Procurement

  • García-Segura, Tatiana|||0000-0002-7059-0566
  • Montalbán-Domingo, Laura|||0000-0002-9506-0350
  • Sanz-Benlloch, Amalia|||0000-0001-8051-0649
  • Lozano-Torró, Alicia
[EN] Universities are preparing future professionals to face real problems. Sustainable development is a challenge that requires particular attention from educational programs. In their profession, civil engineers address many decisions that can compromise the sustainability of infrastructure. This paper proposes a sustainable decision-making module to promote student competencies relevant to solving real engineering decision-making problems while meeting sustainability criteria. The module is tested in a project management course for a master¿s in Planning and Management in Civil Engineering program. Students were placed in a procurement process scenario with the objective of designing a sustainable decision-making layout for selecting the best construction company to construct a highway. The assessment of the student performance revealed that most students acquired higher-order cognitive skills, and the perception survey showed that this learning method has been widely accepted for developing competencies related to both decision-making and sustainable thinking. This study could serve as an example for engineering education to promote sustainable practices through the active exploration of decision-making in real professional situations., The authors acknowledge the financial support of the Valencian Regional Government (Project No. GV/2018//085) and the Spanish Ministry of Economy and Competitiveness, along with European Regional Development Fund (Project No. BIA2017-85098-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Bridge Carbon Emissions and Driving Factors Based on a Life-Cycle Assessment Case Study: Cable-Stayed Bridge over Hun He River in Liaoning, China

  • Zhou, ZhiWu
  • Alcalá-González, Julián|||0000-0003-1376-8441
  • Yepes, V.|||0000-0001-5488-6001
[EN] Due to the rapid growth of the construction industry¿s global environmental impact, especially the environmental impact contribution of bridge structures, it is necessary to study the detailed environmental impact of bridges at each stage of the full life cycle, which can provide optimal data support for sustainable development analysis. In this work, the environmental impact case of a three-tower cable-stayed bridge was analyzed through openLCA software, and more than 23,680 groups of data were analyzed using Markov chain and other research methods. It was concluded that the cable-stayed bridge contributed the most to the global warming potential value, which was mainly concentrated in the operation and maintenance phases. The conclusion shows that controlling the exhaust pollution of passing vehicles and improving the durability of building materials were the key to reducing carbon contribution and are also important directions for future research., This research was funded by the Spanish Ministry of Economy and Competitiveness, along with FEDER (Fondo Europeo de Desarrollo Regional), project grant number: BIA2017-85098-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Embodied energy optimization of prestressed concrete slab bridge decks

  • Alcalá-González, Julián|||0000-0003-1376-8441
  • Gonzalez Vidosa, Fernando
  • Yepes, V.|||0000-0001-5488-6001
  • Martí Albiñana, José Vicente|||0000-0002-2435-4095
[EN] This paper presents one approach to the analysis and design of post-tensioned cast-in-place concrete slab bridge decks. A Simulated Annealing algorithm is applied to two objective functions: (i) the economic cost; and (ii) the embodied energy at different stages of production materials, transport, and construction. The problem involved 33 discrete design variables: five geometrical ones dealing with the thickness of the slab, the inner and exterior web width, and two flange thicknesses; concrete type; prestressing cables, and 26 variables for the reinforcement set-up. The comparison of the results obtained shows two different optimum families, which indicates that the traditional criteria of economic optimization leads to inefficient designs considering the embodied energy. The results indicate that the objectives are not competing functions, and that optimum energy designs are close to the optimum cost designs. The analysis also showed that the savings of each kW h of energy consumed carries an extra cost of 0.49Euro. The best cost solution presents 5.3% more embodied energy. The best energy solution is 9.7% more expensive than that of minor cost. In addition, the results have showed that the best cost solutions are not the best energy solutions., The authors acknowledge the financial support of the Spanish Ministry of Economy and Competitiveness, along with FEDER funding (Project: BIA2017-85098-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Multi-criteria decision techniques in civil engineering education. Comparative study applied to the sustainability of structures

  • Yepes, V.|||0000-0001-5488-6001
  • Navarro -Martinez, Ignacio Javier
  • Sánchez-Garrido, Antonio J.
[EN] Traditionally, technical degrees have focused on promoting the functionality and durability of designs, orienting the capacities of their students towards the optimization of economic aspects. The challenges that have recently emerged regarding the future of the construction sector and new cities require a paradigm shift in the conventional teaching of civil engineering and architecture. New training trends have been detected in higher education programs through the introduction of new concepts, such as sustainable design. According to UNESCO, "Education for Sustainable Development promotes competencies like critical thinking, and making decisions in a collaborative way". In the postgraduate course "Models of prediction and optimization of concrete structures", taught in the Master of Concrete Engineering at the Polytechnic University of Valencia, students are instructed in research methodologies that allow the evaluation of sustainability through different multi-criteria decision techniques in the selection of the best structural typology considering economic, environmental and social aspects. In this paper, a comparative study is made and the application of the different tools taught in the course for the decision making with multiple criteria, namely SAW, COPRAS, TOPSIS, VIKOR, ELECTRE, MIVES as well as AHP for the weightings. The assess offers a transversal vision, with the characteristics, strengths and weaknesses of these multi-criteria techniques that are commonly used in the field of sustainability, applied in this case between three design alternatives for the structure of a single-family home., The authors acknowledge the financial support of the Spanish Ministry of Economy and Competitiveness, which was co-financed with FEDER funds (Project: BIA2017-85098-R)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Life cycle impact assessment of corrosion preventive designs applied to prestressed concrete bridge decks

  • Navarro -Martinez, Ignacio Javier
  • Yepes, V.|||0000-0001-5488-6001
  • Martí Albiñana, José Vicente|||0000-0002-2435-4095
  • Gonzalez Vidosa, Fernando
[EN] Chloride corrosion of reinforcing steel in concrete structures is a major issue in the construction sector due to economic and environmental reasons. Assuming different prevention strategies in aggressive marine environments results in extending the service life of the exposed structures, reducing the maintenance actions required throughout their operation stage. The aim of the present study is to analyze the environmental implications of several prevention strategies through a life cycle assessment using a prestressed bridge deck as a case study. The environmental impacts of 15 prevention alternatives have been evaluated when applied to a real case of study, namely a bridge deck exposed to a chloride laden surrounding. The Eco-indicator 99 methodology has been adopted for the evaluation of the impacts. As some of the alternatives involve the use of by-products such as fly ash and silica fume, economic allocation has been assumed to evaluate their environmental impacts. Results from the life cycle analysis show that the environmental impacts of the chloride exposed structure can be reduced significantly by considering specific preventive designs, such as adding silica fume to concrete, reducing its water to cement ratio or applying hydrophobic or sealant treatments to its surface. In such scenarios, the damage caused to the environment mainly due to maintenance operations and material consumption can be reduced up to a 30e40% of the life cycle impacts associated to a conventional design. The study shows how the application of life cycle assessment methodologies can be of interest to reduce the environmental impacts derived from the maintenance operations required by bridge decks subjected to aggressive chloride laden environments., The authors acknowledge the financial support of the Spanish Ministry of Economy and Competitiveness, along with FEDER funding (Project: BIA2017-85098-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Life cycle assessment of earth-retaining walls: An environmental comparison

  • Pons, J.J.
  • Penadés-Plà, Vicent
  • Yepes, V.|||0000-0001-5488-6001
  • Martí Albiñana, José Vicente|||0000-0002-2435-4095
[EN] Earth-retaining walls are one of the most common structures in civil engineering, a discipline of the construction sector, which is known to produce one of the highest environmental impacts. Therefore, developing cleaner design and construction practices could contribute to a more sustainable future for our planet. To make a step towards this goal, this study comprises the life cycle assessment (LCA) of the four most common earth-retaining walls built between 1 to 6 m of height: cantilever walls, gravity walls, masonry walls and gabion walls to obtain the best solutions for the environment. To assess the environmental impacts caused throughout their whole life-cycle including the production, construction, use and end of life phases, we used the OpenLCA software, the ecoinvent 3.3 database and the ReCiPe (H) method. The associated uncertainties have been considered and the results are provided in both midpoint and endpoint approaches. Our findings show that gabion and masonry walls produce the lowest global impact. On the one hand, gabion walls cause less damage to human health but on the other hand, masonry walls cause less damage to the ecosystems. Furthermore, gravity walls produce similar impacts to gabion and masonry walls between 1 and 3 m of height as well as fewer impacts than cantilever walls for a height of 4 m. In conclusion, gabion and masonry walls are preferable to concrete walls for heights between 1 and 6 m and cantilever walls should be used over gravity walls for greater heights than 4.5 m., This research was funded by the Spanish Ministry of Economy and Competitiveness along with FEDER funding (Project BIA2017-85098-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Proposal of Sustainability Indicators for the Design of Small-Span Bridges

  • Milani, Cleovir José
  • Kripka, Moacir
  • Yepes, V.|||0000-0001-5488-6001
[EN] The application of techniques to analyze sustainability in the life cycle of small-span bridge superstructures is presented in this work. The objective was to obtain environmental and economic indicators for integration into the decision-making process to minimize the environmental impact, reduce resource consumption and minimize life cycle costs. Twenty-seven configurations of small-span bridges (6 to 20 m) of the following types were analyzed: steel¿concrete composite bridges, cast in situ reinforced concrete bridges, precast bridges and prestressed concrete bridges, comprising a total of 405 structures. Environmental impacts and costs were quantified via life cycle environmental assessment and life cycle cost analysis following the boundaries of systems from the extraction of materials to the end of bridge life ("from cradle to grave"). In general, the results indicated that the environmental performance of the bridges was significantly linked to the material selection and bridge configuration. In addition, the study enabled the identification of the products and processes with the greatest impact in order to subsidize the design of more sustainable structures and government policies., This research was funded by the Brazilian government in the form of CAPES and CNPq grants, as well as the Spanish Ministry of Economy and Competitiveness, along with FEDER funding (Project: BIA2017-85098-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Life-cycle sustainability design of post-tensioned box-girder bridge obtained by metamodel-assisted optimization and decision-making under uncertainty

  • Penadés Plà, Vicent
[EN] Currently, there is a trend towards sustainability, especially in developed countries, where the concerns of society about environmental degradation and social problems have increased. Following this trend, the construction sector is one of the most influential sectors due to its high economic, environmental, and social impacts. At the same time, there is an increase in the demand for transport, which drives a need to develop and maintain the necessary infrastructure for this purpose. Taking all these factors into account, bridges become a key structure and therefore assessment of sustainability throughout their whole life-cycle is essential. The main objective of this thesis is to propose a methodology that allows assessment of the sustainability of a bridge under uncertain initial conditions (subjectivity of the decision-maker or variability of initial parameters) and optimization of the design to obtain a robust optimal bridge. To this end, an extensive bibliographic review of all the works that perform assessments of the sustainability of bridges through the valuation of criteria related to their main pillars (economic, environmental, or social) has been carried out. In this review, it has been observed that the most comprehensive way to evaluate the environmental and social pillars is through the use of life-cycle impact assessment methods. These methods allow sustainability assessment to be performed for the whole life-cycle of the bridge. This process provides valuable information to decision-makers for the assessment and selection of the most sustainable bridge. However, the decision-makers' subjective assessments of the relative importance of the criteria influence the final assessment of sustainability. For this reason, it is necessary to create a methodology that reduces the associated uncertainty and seeks robust solutions according to the opinion of decision-makers. In addition, for bridges, the design and decision-making are conditioned by the initially defined parameters. This leads to solutions that may be sensitive to small changes in these initial conditions. A robust optimal design makes it possible to obtain optimal solutions and structurally stable designs under variations of the initial conditions as well as sustainable designs that are not influenced by the preferences of the stakeholders who are part of the decision-making process. Thus, obtaining a robust optimal design becomes a probabilistic optimization process that has a high computational cost. For this reason, the use of metamodels has been integrated into the proposed methodology. Specifically, Latin hypercube sampling is used for the definition of the initial sample and a kriging model is used for the definition of the mathematical approximation. In this way, kriging-based heuristic optimization reduces the computational cost by more than 90% with respect to conventional heuristic optimization while obtaining very similar results. This thesis provides, first of all, an extensive bibliographic review of both the criteria used for the assessment of sustainability of bridges and the different methods of life-cycle impact assessment to obtain a complete profile of the environmental and social pillars. Subsequently, a methodology is defined for the full assessment of sustainability, using life-cycle impact assessment methods. Likewise, an approach is proposed that makes it possible to obtain structures with little influence from the structural parameters, as well as from the preferences of the different decision-makers regarding the sustainability criteria. The methodology provided in this thesis is applicable to any other type of structure., [ES] Actualmente existe una tendencia hacia la sostenibilidad, especialmente en los países desarrollados donde la preocupación de la sociedad por el deterioro ambiental y los problemas sociales ha aumentado. Siguiendo esta tendencia, el sector de la construcción es uno de los sectores que mayor influencia tiene debido a su alto impacto económico, ambiental y social. Al mismo tiempo, existe un incremento en la demanda de transporte que provoca la necesidad de desarrollo y mantenimiento de las infraestructuras necesarias para tal fin. Con todo esto, los puentes se convierten en una estructura clave, y por tanto, la valoración de la sostenibilidad a lo largo de toda su vida es esencial. El objetivo principal de esta tesis es proponer una metodología que permita valorar la sostenibilidad de un puente bajo condiciones iniciales inciertas (subjetividad del decisor o variabilidad de parámetros iniciales) y optimizar el diseño para obtener puentes óptimos robustos. Para ello, se ha realizado una extensa revisión bibliográfica de todos los trabajos en los que se realiza un análisis de la sostenibilidad mediante la valoración de criterios relacionados con sus pilares principales (económico, medio ambiental o social). En esta revisión, se ha observado que la forma más completa de valorar los pilares medioambientales y sociales es mediante el uso de métodos de análisis de ciclo de vida. Estos métodos permiten llevar a cabo la valoración de la sostenibilidad durante todas las etapas de la vida de los puentes. Todo este procedimiento proporciona información muy valiosa a los decisores para la valoración y selección del puente más sostenible. No obstante, las valoraciones subjetivas de los decisores sobre la importancia de los criterios influyen en la evaluación final de la sostenibilidad. Por esta razón, es necesario crear una metodología que reduzca la incertidumbre asociada y busque soluciones robustas frente a las opiniones de los agentes implicados en la toma de decisiones. Además, el diseño y toma de decisiones en puentes está condicionado por los parámetros inicialmente definidos. Esto conduce a soluciones que pueden ser sensibles frente a pequeños cambios en dichas condiciones iniciales. El diseño óptimo robusto permite obtener diseños óptimos y estructuralmente estables frente a variaciones de las condiciones iniciales, y también diseños sostenibles y poco influenciables por las preferencias de los decisores que forman parte del proceso de toma de decisión. Así pues, el diseño óptimo robusto se convierte en un proceso de optimización probabilística que requiere un gran coste computacional. Por este motivo, el uso de metamodelos se ha integrado en la metodología propuesta. En concreto, se ha utilizado hipercubo latino para la definición de la muestra inicial y los modelos kriging para la definción de la aproximación matemática. De esta forma, la optimización heurística basada en kriging ha permitido reducir más de un 90% el coste computacional respecto a la optimización heurística conveniconal obteniendo resultados muy similares. Esta tesis proporciona en primer lugar, una amplia revisión bibliográfica, tanto de los criterios utilizados para la valoración de la sostenibilidad en puentes como de los diferentes métodos de análisis de ciclo de vida para obtener un perfil completo de los pilares ambientales y sociales. Posteriormente, se define una metodología para la valoración completa de la sostenibilidad, usando métodos de análisis de ciclo de vida. Asimismo, se propone un enfoque que permite obtener estructuras poco influenciables por los parámetros estructurales, así como por las preferencias de los diferentes decisores frente a los criterios sostenibles. La metodología proporcionada en esta tesis es aplicable a cualquier otro tipo de estructura., [CA] Actualment existeix una tendència cap a la sostenibilitat, especialment en els països desenrotllats on la preocupació de la societat pel deteriori ambiental i els problemes socials ha augmentat. Seguint aquesta tendència, el sector de la construcció és un dels sectors que major influència té a causa del seu alt impacte econòmic, ambiental i social. Al mateix temps, existeix un increment en la demanda de transport que provoca la necessitat de desenrotll i manteniment de les infraestructures necessàries per a tal fi. En tot açò, els ponts es converteixen en una estructura clau, i per tant, la valoració de la sostenibilitat al llarg de tota la seua vida és essencial. L'objectiu principal d'aquesta tesi doctoral és proposar una metodologia que permeta valorar la sostenibilitat d'un pont baix condicions inicials incertes (subjectivitat del decisor o variabilitat dels paràmetres inicials) i optimitzar el disseny per a obtenir ponts òptims robusts. Per a això, s'ha realitzat una extensa revisió bibliogràfica de tots els treballs en els quals es realitza un anàlisis de la sostenibilitat mitjançant la valoració de criteris relacionats amb els seus pilars principals (econòmic, ambiental o social). En aquesta revisió s'ha observat que la forma més completa de valorar els pilars ambientals i socials és mitjançant l'ús de mètodes d'anàlisis de cicle de vida. Aquests mètodes permeten realitzar la valoració de la sostenibilitat al llarg de totes les etapes de la vida dels ponts. Tot aquest procediment proporciona informació molt valuosa als decisors per a la valoració i selecció del pont més sostenible. No obstant això, les valoracions subjectives dels decisors sobre la importància dels criteris influeixen en l'avaluació final de la sostenibilitat. Per aquesta raó, és necessari crear una metodologia que reduïsca la incertesa associada i busque solucions robustes enfront de les opinions dels agents implicats en la presa de decisions. A més, el disseny i la presa de decisions en ponts està condicionat pels paràmetres inicialment definits. Açò condueix a solucions que poden ser sensibles front a menuts canvis en les dites condicions inicials. El disseny òptim robust permet obtenir dissenys òptims i estructuralment estables front a variacions de les condicions inicials, i també dissenys sostenibles i poc influenciables per les preferències dels decisors que formen part del procés de presa de decisió. D'aquesta manera, el disseny òptim robust es converteix en un procés d'optimització probabilística que requereix un gran cost computacional. Per aquest motiu, l'ús de metamodels s'ha integrat en la metodologia proposta. En concret, s'ha utilitzat l'hipercub llatí per a la definició de la mostra inicial i els models kriging per a la definició de l'aproximació matemàtica. D'aquesta forma, l'optimització heurística basada en kriging ha permés reduir més d'un 90% el cost computacional respecte a l'optimització heurística convencional obtenint resultats molt similars. Aquesta tesi doctoral proporciona en primer lloc, una ampla revisió bibliogràfica, tant dels criteris utilitzats per a la valoració de la sostenibilitat en ponts com dels diferents mètodes d'anàlisis de cicle de vida per a obtenir un perfil complet dels pilars ambientals i socials. Posteriorment, es defineix una metodologia per a la valoració completa de la sostenibilitat, utilitzant mètodes d'anàlisis de cicle de vida. Així mateix, es proposa un enfocament que permet obtenir estructures poc influenciables pels paràmetres estructurals, així com per les preferències dels diferents decisors enfront dels criteris sostenibles. La metodologia proporcionada en aquesta tesi doctoral és aplicable a qualsevol altre tipus d'estructura. Nº de páginas:, I would like to acknowledge the economic support of the Spanish Ministry of Economy and Competitiveness, formerly called Spanish Ministry of Science and Innovation. This thesis has been possible thanks to the FPI fellowship and the financially support of BRIDLIFE (Research Project BIA2014-56574-R) and DIMALIFE (Project BIA2017-85098-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Impact of R&amp, D&amp, I on the Performance of Spanish Construction Companies

  • López, Salvador
  • Yepes, V.|||0000-0001-5488-6001
[EN] Deciding whether certain factors should be considered drivers of innovation in construction firms is crucial in terms of improving their performance and survival in an environment that is changing by leaps and bounds. Throughout the years, construction companies have been considered to be traditional and without the tendency to innovate. However, several studies have confirmed that this perception of the sector is evolving and that successful instruments from other industries are gradually being adapted for the benefit of the industry. The objective of this paper is therefore to investigate the potential factors affecting the performance of these organizations. Eighteen factors related to the individual, group, and organizational levels were identified through a review of the literature and an instrument developed that was validated by experienced professionals. A questionnaire was sent to 103 people working in the sector at the national level to obtain their views. The results of the classification analysis indicate that "technology and equipment" and "software acquisition" are considered the two most significant factors. In addition, these 18 factors can be classified into 7 groups: (i) internal drivers of innovation; (ii) innovation within the organization; (iii) technological innovation; (iv) technological links with the environment; (v) external drivers of innovation; (vi) innovation in processes; (vii) a culture of innovation in the company. Innovation in processes has the highest level of impact. This research deepens the current understanding of the factors at different organizational levels that must be highlighted in the implementation of an R&D system in order for companies to improve their performance and survival in future processes., This research was funded by the Spanish Ministry of Economy and Competitiveness, along with FEDER, Grant no. BIA2017-85098-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Life Cycle Assessment of Bridges Using Bayesian Networks and Fuzzy Mathematics

  • Zhou, Zhi-Wu
  • Kripka, Moacir
  • Alcalá-González, Julián|||0000-0003-1376-8441
  • Yepes, V.|||0000-0001-5488-6001
[EN] At present, reducing the impact of the construction industry on the environment is the key to achieving sustainable development. Countries all over the world are using software systems for bridge environmental impact assessment. However, due to the complexity and discreteness of environmental factors in the construction industry, they are difficult to update and determine quickly, and there is a phenomenon of data missing in the database. Most of the lost data are optimized by Monte Carlo simulation, which greatly reduces the reliability and accuracy of the research results. This paper uses Bayesian advanced fuzzy mathematics theory to solve this problem. In the research, a Bayesian fuzzy mathematics evaluation and a multi-level sensitivity priority discrimination model are established, and the weights and membership degrees of influencing factors were defined to achieve comprehensive coverage of influencing factors. With the support of theoretical modelling, software analysis and fuzzy mathematics theory are used to comprehensively evaluate all the influencing factors of the five influencing stages in the entire life cycle of the bridge structure. The results show that the material manufacturing, maintenance, and operation of the bridge still produce environmental pollution; the main source of the emissions exceeds 53% of the total emissions. The effective impact factor reaches 3.01. At the end of the article, a big data sensitivity model was established. Through big data innovation and optimization analysis, traffic pollution emissions were reduced by 330 tonnes. Modeling of the comprehensive research model; application; clearly confirms the effectiveness and practicality of the Bayesian network fuzzy number comprehensive evaluation model in dealing with uncertain factors in the evaluation of the sustainable development of the construction industry. The research results have made important contributions to the realization of the sustainable development goals of the construction industry., This research was funded by the Spanish Ministry of Economy and Competitiveness, along with FEDER (Fondo Europeo de Desarrollo Regional), project grant number: BIA2017-85098-R
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Impact of game-based learning on understanding Lean Construction Principles

  • Herrera, Rodrigo F.
  • Sanz-Benlloch, Amalia|||0000-0001-8051-0649
  • Montalbán-Domingo, Laura|||0000-0002-9506-0350
  • García-Segura, Tatiana|||0000-0002-7059-0566
  • Pellicer, Eugenio|||0000-0001-9100-0644
[EN] Lean philosophy introduces a new approach for maximizing value while minimizing waste, facilitating sustainable practices at the same time. Companies have become aware of these improvements and are demanding students well formed in Lean concepts. However, to meet this demand, universities must adapt their curricula to include courses that use alternative teaching methods to connect to real contexts. This paper seeks to analyze the benefits of lecture- and game-based learning for developing students¿ understanding of Lean Construction Principles. A case study is carried out in the ¿Lean Construction¿ course of the Master of Planning and Management in Civil Engineering of the Universitat Politècnica de València. A combination of a traditional lecture and three simple games is applied. Descriptive statistics, the Mann¿Whitney U-test, and the Wilcoxon test are performed to analyze the impact of each activity on the understanding of each Lean Construction Principle. Results highlight the importance of combining the lecture class with multiple games to effectively impart knowledge about Lean principles and their application in the construction industry. In addition, they emphasize the importance of selecting the game according to the Lean principle to be taught., This research was funded by CONICYT grant number PCHA/National Doctorate/2018-21180884 for funding the graduate research of Herrera, and by the Spanish Ministry of Economy and Competitiveness, along with FEDER funding, grant number BIA2017-85098-R. The APC was funded by School of Civil Engineering, Pontificia Universidad Catolica de Valparaiso, Chile.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

An Optimization-LCA of a Prestressed Concrete Precast Bridge

  • Penadés-Plà, Vicent
  • García-Segura, Tatiana|||0000-0002-7059-0566
  • Martí Albiñana, José Vicente|||0000-0002-2435-4095
  • Yepes, V.|||0000-0001-5488-6001
[EN] The construction sector is one of the most active sectors, with a high economic, environmental and social impact. For this reason, the sustainable design of structures and buildings is a trend that must be followed. Bridges are one of the most important structures in the construction sector, as their construction and maintenance are crucial to achieve and retain the best transport between different places. Nowadays, the choice of bridge design depends on the initial economic criterion but other criteria should be considered to assess the environmental and social aspects. Furthermore, for a correct choice, the influence of these criteria during the bridge life-cycle must be taken into account. This study aims to analyse the life-cycle environmental impact of efficient structures from the economic point of view. Life-cycle assessment process is used to obtain all the environmental information about bridges. In this paper, a prestressed concrete precast bridge is cost-optimized and afterwards, the life-cycle assessment is carried out to achieve the environmental information about the bridge., The authors acknowledge the financial support of the Spanish Ministry of Economy and Competitiveness, along with FEDER funding (Project: BIA2017-85098-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Urban vulnerability assessment: Advances from the strategic planning outlook

  • Salas, J.
  • Yepes, V.|||0000-0001-5488-6001
[EN] Urban strategic planning and urban vulnerability assessment have increasingly become important issues in both policy agenda and academia. However, a comprehensive review of the advances made in urban vulnerability, emphasizing their shared aspects, has yet to be performed. The aiming of this paper is to addresses the latter by conducting an evaluation on assessment methods disclosed in this decade. Once their common evolutive pathway is traced, the review follows an analytical framework, based on the above, evaluating the research requirements from both a quantitative and qualitative point of view. Our findings indicate that the robustness, cognitive and participatory research lines are those in which most advancement has been made, while those of urban dynamics and multi-scale progressed the least. Our analysis also demonstrates that methods integrating more lines of research, as well as the employment of comprehensive approaches, promotes advancing the developmental stage. We conclude that the focusing of research lines should be shifted, in order to bridge the qualitative gap identified without demanding an improbable, quantitative increase., The authors acknowledge the financial support of the Spanish Ministry of Economy and Competitiveness, along with FEDER funding (Project: BIA2017-85098-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Life cycle assessment of a railway tracks substructures: Comparison of ballast and ballastless rail tracks

  • Pons, Joaquín J.
  • Villalba Sanchis, Ignacio|||0000-0002-4091-8719
  • Insa Franco, Ricardo|||0000-0002-6655-4458
  • Yepes, V.|||0000-0001-5488-6001
[EN] The increase of train speed and axle load is an essential goal to make the railway transport more and more competitive for passengers and freights. On this basis, the unevenness of the railway track is crucial for the safety of the railway due to the high speed of the vehicle. Although ballasted tracks represent by far the most used railway track substructure, in recent years the modernization process has led the development of the ballastless track substructures. In deciding between the use of ballasted or ballastless track substructure there are many important technical, economical and environmental factors that have to be addressed. Based on the above, the principal objective of this study was to evaluate the environmental impact of different railway track substructures including ballast, cast-in sleeper and embedded track systems on the short, medium and long term. To accomplish this task, a life cycle assessment (LCA) was carried out throughout the entire life cycle of the railway infrastructure by using the ReCiPe (H) method. Although such approach is commonly included in the environmental assessment of building products and buildings, it was rarely applied in the analysis of the environmental impacts of railway track substructure. Thus, the result of these LCA showed that ballasted tracks cause the lowest environmental impact for service lives of up to 75 years. On the other hand, the embedded track beds cause the highest environmental impacts, regardless of their service life. The highest contributor for the environmental impacts of the track beds was the steel production. The results of this study will provide relevant environmental information for engineers and decision makers to select the most adequate railway track substructures for addressing issues related to the pursuit of sustainable development., This research was funded by the Spanish Ministry of Economy and Competitiveness along with FEDER funding (Project BIA2017-85098R), as well as Dr. Ignacio Navarro Martinez for their valuable comments and assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Optimal Deep Learning Assisted Design of Socially and Environmentally Efficient Steel Concrete Composite Bridges under Constrained Budgets

  • Martínez-Muñoz, D.|||0000-0002-6906-3830
[ES] El diseño de infraestructuras está fuertemente influido por la búsqueda de soluciones que tengan en cuenta el impacto en la economía, el medio ambiente y la sociedad. Estos criterios están muy relacionados con la definición de sostenibilidad que hizo la Comisión Brundtland en 1987. Este hito supuso un reto para técnicos, científicos y legisladores. Este reto consistía en generar métodos, criterios, herramientas y normativas que permitieran incluir el concepto de sostenibilidad en el desarrollo y diseño de nuevas infraestructuras. Desde entonces, se han producido pequeños avances en la búsqueda de la sostenibilidad, pero se necesitan más a corto plazo. Como plan de acción, las Naciones Unidas establecieron los Objetivos de Desarrollo Sostenible, fijando el año 2030 como meta para alcanzarlos. Dentro de estos objetivos, las infraestructuras se postulan como un punto crítico. Tradicionalmente, se han desarrollado métodos para obtener diseños óptimos desde el punto de vista del impacto económico. Sin embargo, aunque en los últimos tiempos se ha avanzado en la aplicación y utilización de métodos de análisis del ciclo de vida completo, aún falta un consenso claro, especialmente en el pilar social de la sostenibilidad. Dado que la sostenibilidad engloba diferentes criterios, que en principio no van necesariamente de la mano, el problema de la búsqueda de la sostenibilidad se plantea no sólo como un problema de optimización, sino también como un problema de toma de decisiones multi-criterio. El objetivo principal de esta tesis doctoral es proponer diferentes metodologías para la obtención de diseños óptimos que introduzcan los pilares de la sostenibilidad en el diseño de puentes mixtos acero-hormigón. Como problema estructural representativo se propone un puente viga en cajón de tres vanos mixto. Dada la complejidad de la estructura, en la que intervienen 34 variables discretas, la optimización con métodos matemáticos resulta inabordable. Por ello, se propone el uso de algoritmos metaheurísticos. Esta complejidad también se traduce en un alto coste computacional para el modelo, por lo que se implementa un modelo de redes neuronales profundas que permite la validación del diseño sin necesidad de computación. Dada la naturaleza discreta del problema, se proponen técnicas de discretización para adaptar los algoritmos al problema de optimización estructural. Además, para mejorar las soluciones obtenidas a partir de estos algoritmos discretos, se introducen métodos de hibridación basados en la técnica K-means y operadores de mutación en función del tipo de algoritmo. Los algoritmos utilizados se clasifican en dos ramas. La primera son los basados en trayectorias como el Simulated Annealing, Threshold Accepting y el Algoritmo del Solterón. Por otra parte, se utilizan algoritmos de inteligencia de enjambre como Jaya, Sine Cosine Algorithm y Cuckoo Search. La metodología de Análisis del Ciclo de Vida definida en la norma ISO 14040 se utiliza para evaluar el impacto social y medioambiental de los diseños propuestos. La aplicación de esta metodología permite evaluar el impacto y compararlo con otros diseños. La evaluación mono-objetivo de los diferentes criterios lleva a la conclusión de que la optimización de costes está asociada a una reducción del impacto medioambiental y social de la estructura. Sin embargo, la optimización de los criterios medioambientales y sociales no reduce necesariamente los costes. Por ello, para realizar una optimización multi-objetivo y encontrar una solución de compromiso, se implementa una técnica basada en la Teoría de Juegos, proponiendo una estrategia de juego cooperativo. La técnica multi-criterio utilizada es la Teoría de la Entropía para asignar pesos a los criterios para la función objetivo agregada. Los criterios considerados son los tres pilares de la sostenibilidad y la facilidad constructiva de la losa superior. Aplicando esta técnica se obtiene un diseño óptimo relativo a los tres pilares de la soste, [CA] El disseny d'infraestructures està fortament influït per la cerca de solucions que tinguen en compte l'impacte en l'economia, el medi ambient i la societat. Aquests criteris estan molt relacionats amb la definició de sostenibilitat que va fer la Comissió Brundtland en 1987. Aquesta fita va suposar un repte per a tècnics, científics i legisladors. Aquest repte consistia a generar mètodes, criteris, eines i normatives que permeteren incloure el concepte de sostenibilitat en el desenvolupament i disseny de noves infraestructures. Des de llavors, s'han produït xicotets avanços en la cerca de la sostenibilitat, però es necessiten més a curt termini. Com a pla d'acció, les Nacions Unides van establir els Objectius de Desenvolupament Sostenible, fixant l'any 2030 com a meta per aconseguir-los. Dins d'aquests objectius, les infraestructures es postulen com un punt crític. Tradicionalment, s'han desenvolupat mètodes per a obtindre dissenys òptims des del punt de vista de l'impacte econòmic. No obstant això, encara que en els últims temps s'ha avançat en l'aplicació i utilització de mètodes d'anàlisis del cicle de vida complet, encara falta un consens clar, especialment en el pilar social de la sostenibilitat. Atés que la sostenibilitat engloba diferents criteris, que en principi no van necessàriament de la mà, el problema de la cerca de la sostenibilitat es planteja no sols com un problema d'optimització, sinó també com un problema de presa de decisions multi-criteri. L'objectiu principal d'aquesta tesi doctoral és proposar diferents metodologies per a l'obtenció de dissenys òptims que introduïsquen els pilars de la sostenibilitat en el disseny de ponts mixtos. Com a problema estructural representatiu es proposa un pont viga en calaix de tres vans mixt. Donada la complexitat de l'estructura, en la qual intervenen 34 variables discretes, l'optimització amb mètodes matemàtics resulta inabordable. Per això, es proposa l'ús d'algorismes metaheurísticos. Aquesta complexitat també es tradueix en un alt cost computacional per al model, per la qual cosa s'implementa un model de xarxes neuronals profundes que permet la validació del disseny sense necessitat de computació. Donada la naturalesa discreta del problema, es proposen tècniques de discretització per a adaptar els algorismes al problema d'optimització estructural. A més, per a millorar les solucions obtingudes a partir d'aquests algorismes discrets, s'introdueixen mètodes d'hibridació basats en la tècnica K-*means i operadors de mutació en funció del tipus d'algorisme. Els algorismes utilitzats es classifiquen en dues branques. La primera són els basats en trajectòries com la Simulated Annealing, Threshold Accepting i el Old Bachelor Acceptance. D'altra banda, s'utilitzen algorismes d'intel·ligència d'eixam com Jaya, Sine Cosine Algorithm i Cuckoo Search. La metodologia d'Anàlisi del Cicle de Vida definida en la norma ISO 14040 s'utilitza per a avaluar l'impacte social i mediambiental dels dissenys proposats. L'aplicació d'aquesta metodologia permet avaluar l'impacte i comparar-lo amb altres dissenys. L'avaluació mono-objectiu dels diferents criteris porta a la conclusió que l'optimització de costos està associada a una reducció de l'impacte mediambiental i social de l'estructura. No obstant això, l'optimització dels criteris mediambientals i socials no redueix necessàriament els costos. Per això, per a realitzar una optimització multi-objectiu i trobar una solució de compromís, s'implementa una tècnica basada en la Teoria de Jocs, proposant una estratègia de joc cooperatiu. La tècnica multi-criteri utilitzada és la Teoria de l'Entropia per a assignar pesos als criteris per a la funció objectiu agregada. Els criteris considerats són els tres pilars de la sostenibilitat i la facilitat constructiva de la llosa superior. Aplicant aquesta tècnica s'obté un disseny òptim relatiu als tres pilars de la sostenibilitat i a partir del qual es millora la facilitat constructiva., [EN] Infrastructure design is strongly influenced by the search for solutions considering the impact on the economy, the environment, and society. These criteria were strongly related to the definition of sustainability by the Brundtland Commission in 1987. This milestone posed a challenge for technicians, scientists, and legislators alike. This challenge consisted of generating methods, criteria, tools, and regulations that would allow the inclusion of the concept of sustainability in developing and designing new infrastructures. Since then, small advances have been made in the search for sustainability, but they need more in the short term. As an action plan, the United Nations established the Sustainable Development Goals, setting the year 2030 as the target for achieving them. Within these goals, infrastructure is postulated as a critical point. Traditionally, methods have been developed to obtain optimal designs from the point of view of economic impact. However, although recent advances have been made in implementing and using complete life cycle analysis methods, there still needs to be a clear consensus, especially in the social pillar of sustainability. Given that sustainability encompasses different criteria, which in principle do not necessarily go hand in hand, the problem of finding sustainability is posed not only as an optimization problem but also as a multi-criteria decision-making problem. The main objective of this doctoral thesis is to propose different methodologies for obtaining optimal designs that introduce the pillars of sustainability in the design of steel-concrete composite bridges. A three-span box-girder bridge is proposed as a representative structural problem. Given the complexity of the structure, which involves 34 discrete variables, optimization with mathematical methods is unaffordable. Therefore, the use of metaheuristic algorithms is proposed. This complexity also translates into a high computational cost for the model, so a deep neural networks model is implemented to allow the validation of the design without the need for computation. Given the problem's discrete nature, discretization techniques are proposed to adapt the algorithms to the structural optimization problem. In addition, to improve the solutions obtained from these discrete algorithms, hybridization methods based on the K-means technique and mutation operators are introduced depending on the type of algorithm. The algorithms used are classified into two branches. The first are those based on trajectories such as Simulated Annealing, Threshold Accepting, and Old Bachelor Acceptance. Moreover, swarm intelligence algorithms such as Jaya, Sine Cosine Algorithm, and Cuckoo Search are used. The Life Cycle Assessment methodology defined in the ISO 14040 standard is used to evaluate the social and environmental impact of the proposed designs. The application of this methodology allows the evaluation of the impact and comparison with other designs. The single-objective evaluation of the different criteria leads to the conclusion that cost optimization is associated with a reduction of the environmental and social impact of the structure. However, optimizing environmental and social criteria does not necessarily reduce costs. Therefore, to perform a multi-objective optimization and find a compromise solution, a technique based on Game Theory is implemented, proposing a cooperative game strategy. The multi-criteria technique used is the Entropy Theory to assign criteria weights for the aggregate objective function. The criteria considered are the three pillars of sustainability and the constructive ease of the top slab. Applying this technique results in an optimal design concerning the three pillars of sustainability and from which the constructive ease is improved., I would like to thank the Spanish Ministry of Science and Innovation. This research would not have been possible without the support of grant FPU-18/01592, funded by MCIN/AEI/10.13039/501100011033, "ESF invests in your future", as well as the financial assistance provided by DIMALIFE (BIA2017-85098-R) and HYDELIFE (PID2020-117056RB-I00), both funded by MCIN/AEI/10.13039/5011-00011033, and "ERDF A way of making Europe".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Steel-Concrete Composite Bridges: Design, Life Cycle Assessment, Maintenance, and Decision-Making

  • Martínez-Muñoz, D.|||0000-0002-6906-3830
  • Martí Albiñana, José Vicente|||0000-0002-2435-4095
  • Yepes, V.|||0000-0001-5488-6001
[EN] Steel-concrete composite bridges are used as an alternative to concrete bridges because of their ability to adapt their geometry to design constraints and the possibility of reusing some of the materials in the structure. In this review, we report the research carried out on the design, behavior, optimization, construction processes, maintenance, impact assessment, and decision-making techniques of composite bridges in order to arrive at a complete design approach. In addition to a qualitative analysis, a multivariate analysis is used to identify knowledge gaps related to bridge design and to detect trends in research. An additional objective is to make visible the gaps in the sustainable design of composite steel-concrete bridges, which allows us to focus on future research studies. *eresults of this work show how researchers have concentrated their studies on the preliminary design of bridges with a mainly economic approach, while at a global level, concern is directed towards the search for sustainable solutions. It is found that life cycle impact assessment and decision-making strategies allow bridge managers to improve decision-making, particularly at the end of the life cycle of composite bridges., This study was funded by the Spanish Ministry of Economy and Competitiveness, along with FEDER funding (DIMALIFE Project BIA2017-85098-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Study of Social and Environmental Needs for the Selection of Sustainable Criteria in the Procurement of Public Works

  • Montalbán-Domingo, Laura|||0000-0002-9506-0350
  • García-Segura, Tatiana|||0000-0002-7059-0566
  • Pellicer, Eugenio|||0000-0001-9100-0644
  • Aguilar-Morocho, Madeleine
This research was funded by the Spanish Ministry of Economy and Competitiveness, grant number BIA2017-85098-R and the Valencian Regional Government, grant number GV/2018//085
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Heuristic Techniques for the Design of Steel-Concrete Composite Pedestrian Bridges

  • Yepes, V.|||0000-0001-5488-6001
  • Martínez-Muñoz, D.|||0000-0002-6906-3830
  • López Desfilis, Vicente José|||0000-0003-2430-380X
  • Martí Albiñana, José Vicente|||0000-0002-2435-4095
  • Dasí-Gil, M.
[EN] The objective of this work was to apply heuristic optimization techniques to a steel-concrete composite pedestrian bridge, modeled like a beam on two supports. A program has been developed in Fortran programming language, capable of generating pedestrian bridges, checking them, and evaluating their cost. The following algorithms were implemented: descent local search (DLS), a hybrid simulated annealing with a mutation operator (SAMO2), and a glow-worms swarm optimization (GSO) in two variants. The first one only considers the GSO and the second combines GSO and DLS, applying the DSL heuristic to the best solutions obtained by the GSO. The results were compared according to the lowest cost. The GSO and DLS algorithms combined obtained the best results in terms of cost. Furthermore, a comparison between the CO2 emissions associated with the amount of materials obtained by every heuristic technique and the original design solution were studied. Finally, a parametric study was carried out according to the span length of the pedestrian bridge., The authors acknowledge the financial support of the Spanish Ministry of Economy and Business, along with FEDER funding (DIMALIFE Project: BIA2017-85098-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Sustainability assessment of concrete bridge deck designs in coastal environments using neutrosophic criteria weights

  • Navarro -Martinez, Ignacio Javier
  • Yepes, V.|||0000-0001-5488-6001
  • Martí Albiñana, José Vicente|||0000-0002-2435-4095
[EN] Essential infrastructures such as bridges are designed to provide a long-lasting and intergenerational functionality. In those cases, sustainability becomes of paramount importance when the infrastructure is exposed to aggressive environments, which can jeopardise their durability and lead to significant maintenance demands. The assessment of sustainability is however often complex and uncertain. The present study assesses the sustainability performance of 16 alternative designs of a concrete bridge deck in a coastal environment on the basis of a neutrosophic group analytic hierarchy process (AHP). The use of neutrosophic logic in the field of multi-criteria decision-making, as a generalisation of the widely used fuzzy logic, allows for a proper capture of the vagueness and uncertainties of the judgements emitted by the decision-makers. TOPSIS technique is then used to aggregate the different sustainability criteria. From the results, it is derived that only the simultaneous consideration of the economic, environmental and social life cycle impacts of a design shall lead to adequate sustainable designs. Choices made based on the optimality of a design in only some of the sustainability pillars will lead to erroneous conclusions. The use of concrete with silica fume has resulted in a sustainability performance of 46.3% better than conventional concrete designs., The authors acknowledge the financial support of the Spanish Ministry of Economy and Competitiveness, along with FEDER funding (Project: BIA2017-85098-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Evaluation of sustainability-oriented transversal competencies in engineering postgraduate studies

  • Navarro -Martinez, Ignacio Javier
  • Yepes, V.|||0000-0001-5488-6001
  • Sánchez-Garrido, A.J.
[EN] In recent times, education for sustainability is gaining more and more relevance in the field of engineering. One of the recently established Sustainable Development Goals explicitly calls for the achievement of sustainable infrastructures by 2030. Infrastructures are recognised as a crucial element towards a sustainable future, as they are responsible for a vast amount of environmental damages and economic expenses, but also are considered to be essential to achieve social welfare and the economic development of regions. Sustainable design of infrastructures requires a paradigm shift in the way engineering students are taught how to face design problems. The complex relation that exists between the conflicting dimensions in which sustainability is founded, namely economy, environment and society, requires of future engineers to develop a series of transversal competencies during their postgraduate studies. However, there are no objective criteria on which to base the assessment of the degree of acquisition of these skills. This paper presents an objective methodology for the evaluation of one of the key competencies required for sustainability-oriented future engineers, namely critical thinking. The proposed methodology is based on the evaluation of the coherency expressed by the students when dealing with a sustainability-related design problem. Such consistency shall be mathematically quantified by means of the Analytic Hierarchy Process. Through the resolution of a particular case study, where students are required to complete a survey comparing different sustainability criteria pairwise, the professor is able to obtain a consistency index from the comparison matrices derived from the survey results of each student. Such indicator is a valuable tool to assess both the clarity with which students perceive sustainability as well as their ability to meet the new challenges that the society will face in the near future., The authors acknowledge the financial support of the Spanish Ministry of Economy and Competitiveness, along with FEDER funding (Project: BIA2017-85098-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Case study of the evaluation of the life cycle of a façade using the flip teaching method

  • Ata-Ali, N.
  • Martínez-Muñoz, D.|||0000-0002-6906-3830
  • Yepes, V.|||0000-0001-5488-6001
  • Martí Albiñana, José Vicente|||0000-0002-2435-4095
[EN] In the constant search for new and innovative pedagogical strategies, a model of teaching is proposed in which the learning of the student and the acquisition of all possible skills is the main thing. This article shows the study carried out by students of the subject "Methods and Advanced Technologies in work", taught in the Master's Degree in Planning and Management in Civil Engineering (MAPGIC) of the Universitat Politècnica de València. By means of the flip teaching or flipped classroom technique, students carry out the evaluation of the life cycle of a type of facade enclosure. This method gives students the responsibility to review the theoretical content so that they can solve their doubts and work on the concepts in class, individually or collaboratively way, as well as knowing, understanding and applying constructive procedures to advanced construction works. In Addition, it will acquire transversal competencies, such as decision-making and problem-solving capacities in terms of designs and projects to be carried out, taking into account ethical, environmental and professional responsibility., The authors are grateful for the support received by the Ministry of Economy, and Business and FEDER funds (Research Project BIA2017-85098-R) and the Universitat Politècnica de València (EXCELCON Educational Innovation and Quality Team).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

An integrated method for the assessment of social sustainability in public-works procurement

  • Montalbán-Domingo, Laura|||0000-0002-9506-0350
  • Pellicer, Eugenio|||0000-0001-9100-0644
  • García-Segura, Tatiana|||0000-0002-7059-0566
  • Sanz-Benlloch, Amalia|||0000-0001-8051-0649
[EN] Today, critical deficiencies hinder the effective inclusion of social criteria in public-works procurement. The primary reasons for this are the lack of information and objective social assessment methods in the construction industry. Hence, this paper proposes a method to assist agencies in including indicators and objective assessments of social sustainability in public-works procurement. This method applies to civil engineering projects in the infrastructure life-cycle construction stage using design-bid-build delivery. Eight social categories and 22 factors are organized into two organizational levels (project and company). Quantitative and semi-quantitative indicators are proposed to assess the social commitment of construction companies in their organizations and projects. Additionally, two aggregation formulas are established as assessment criteria in public-works procurement. The results highlight that the indicators' importance in assessing social commitment in a project can be defined depending on the local context. Moreover, the method to assess corporate social responsibility can also measure and compare a company's performance, regardless of size. The proposed method can be used in procurement procedures, helping public-works procurers develop transparent decision processes., The authors acknowledge the financial support of the Valencian Regional Government (Project No. 05TUI/2020/126904) and the Spanish Ministry of Economy and Competitiveness, along with the European Regional Development Fund (Project No. BIA2017-85098-R). The authors are grateful to the expert panel for their participation in this research.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Black Hole Algorithm for Sustainable Design of Counterfort Retaining Walls

  • Yepes, V.|||0000-0001-5488-6001
  • Martí Albiñana, José Vicente|||0000-0002-2435-4095
  • García, José
[EN] The optimization of the cost and CO 2 emissions in earth-retaining walls is of relevance, since these structures are often used in civil engineering. The optimization of costs is essential for the competitiveness of the construction company, and the optimization of emissions is relevant in the environmental impact of construction. To address the optimization, black hole metaheuristics were used, along with a discretization mechanism based on min¿max normalization. The stability of the algorithm was evaluated with respect to the solutions obtained; the steel and concrete values obtained in both optimizations were analyzed. Additionally, the geometric variables of the structure were compared. Finally, the results obtained were compared with another algorithm that solved the problem. The results show that there is a trade-off between the use of steel and concrete. The solutions that minimize CO 2 emissions prefer the use of concrete instead of those that optimize the cost. On the other hand, when comparing the geometric variables, it is seen that most remain similar in both optimizations except for the distance between buttresses. When comparing with another algorithm, the results show a good performance in optimization using the black hole algorithm., The authors acknowledge the financial support of the financial support of the Spanish Ministry of Economy and Competitiveness, along with FEDER funding (Project: BIA2017-85098-R) to the first and second authors, and the Grant CONICYT/FONDECYT/INICIACION/11180056 to the third author.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Multi-criteria decision analysis techniques applied to the construction of a composite box-girder bridge

  • Yepes, V.|||0000-0001-5488-6001
  • Martínez-Muñoz, D.|||0000-0002-6906-3830
  • Martí Albiñana, José Vicente|||0000-0002-2435-4095
  • Ata-Ali, N.
[EN] This work is based on the case study of a multiple-criteria decision analysis, aimed for the students of the Predictive and optimization models for concrete structures subject, which is taught in the master s degree in Concrete Engineering at the Universitat Politècnica de València. This course features different blocks, among which the optimization of structural and constructive elements by different techniques stands out. Additionally, different techniques of multiple-criteria decision analysis are studied. This case study allows the comparison between two different evaluation methods; the direct comparison method SAW, and the pairwise comparison method AHP. The object of this study is to carry out an analysis of the different types of structural alternatives of a bridge. In this case, four possibilities are considered: Lower Arch, bowstring, cable-stayed and box-girder bridges; for a span length of 100 m, without any supports due to the environmental conditions. The student will acquire different competencies that will allow him, not only to obtain the technical knowledge, but also the capacity to analyze, and solve problems, creativity, innovation, as well as an ethical, professional and environmental awareness. The result of this article opens a field for the investigation of these type of processes through other methods of multiple-criteria decision analysis., The authors acknowledge the support for the Ministry of Economy and Company and FEDER funding (Project BIA2017-85098-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Application of the response surface methodology in a postgraduate optimization course

  • Yepes, V.|||0000-0001-5488-6001
  • Martínez-Muñoz, D.|||0000-0002-6906-3830
  • Martí Albiñana, José Vicente|||0000-0002-2435-4095
[EN] This paper describes the introduction of response surface methodology in a postgraduate course. This case study is carried out in the subject of the predictive models of optimization of concrete structures subject. This subject is inside the curricula of concrete engineering master. In this course students learn concepts such as structures¿ optimization using algorithms, multi-criteria decision making, techniques do design of experiments, and metamodels such as the response surface in order to obtain optimum results. In this case study, the objective is to obtain a design solution of a reinforced concrete wall, using the CO2 emissions as an objective function to reduce its impact. In order to apply this methodology, the students need to use specific software. On the one hand, to carry out the statistical analysis that allow obtaining the response surface Minitab software has been used by students. On the other hand, students need to check the strength of the structure using Cype structural calculation software. As a result of applying this methodology to obtain an optimum reinforced concrete wall allow students to reach a better level in transversal competencies, such as design and project, critical thinking, analysis and problem solving or the use of specific software. This paper will introduce future research studies related to the use of structures optimization techniques by students applying other different optimization techniques., The authors acknowledge the support for the Ministry of Economy and Company and FEDER funding (Project BIA2017-85098-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Optimization of high-performance concrete post-tensioned box-girder pedestrian bridges

  • Yepes, V.|||0000-0001-5488-6001
  • García-Segura, Tatiana|||0000-0002-7059-0566
  • Alcalá-González, Julián|||0000-0003-1376-8441
  • Pérez-López, E.
[EN] This paper deals with the economic optimization of high-performance post-tensioned concrete box-girder pedestrian bridges. To this end, a program analyzes and evaluates the structural restrictions following Spanish codes for structural concrete and bridge design loads. This problem includes 33 discrete design variables that define the geometry, the concrete, the reinforcing steel bars and the post-tensioned steel. Various acceptance criteria are proposed to modify a variant of the simulated annealing algorithm with a neighborhood move based on the mutation operator from the genetic algorithms (SAMO). An objective methodology based on the extreme value theory is used to determine the number of experimental tests required to provide a solution with user-defined accuracy as compared to a global optimum solution. Results indicate that the local optima found by SAMO2 fits a three parameter Weibull distribution and improves the cost results for this structural problem. The minimum value obtained by SAMO2 differed just 0.34% compared to the theoretical minimum value so that, from the structural engineering perspective, the divergence was small enough to be accepted. High strength concrete performance was further studied in a concrete strength parametric study to acquire more evidence-based knowledge on its implications for economic efficiency. Finally, the study showed that high-strength concrete decreases the cost by 4.5% and the amount of concrete by 26%., The Spanish Ministry of Economy and Competitiveness along with FEDER funding (Project BIA2014-56574-R and Project BIA2017-85098-R) financially supported this research
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Sustainable bridge design by metamodel-assisted multi-objective optimization and decision-making under uncertainty

  • García-Segura, Tatiana|||0000-0002-7059-0566
  • Yepes, V.|||0000-0001-5488-6001
  • Penadés-Plà, Vicent
[EN] Today, bridge design seeks not only to minimize cost, but also to minimize adverse environmental and social impacts. This multi-criteria decision-making problem is subject to variability of the opinions of stakeholders regarding the importance of criteria for sustainability. As a result, this paper proposes a method for designing and selecting optimally sustainable bridges under the uncertainty of criteria comparison. A Pareto set of solutions is obtained using a metamodel-assisted multi-objective optimization. A new decision-making technique introduces the uncertainty of the decision-maker's preference through triangular distributions and thereby ranks the sustainable bridge designs. The method is illustrated by a case study of a three-span post-tensioned concrete box-girder bridge designed according to the embodied energy, overall safety and corrosion initiation time. In this particular case, 211 efficient solutions are reduced to two preferred solutions which have a probability of being selected of 81.6% and 18.4%. In addition, a sensitivity analysis validates the influence of the uncertainty regarding the decision making. The approach proposed allows actors involved in the bridge design and decision-making to determine the best sustainable design by finding the probability of a given design being chosen., The authors acknowledge the financial support of the Spanish Ministry of Economy and Competitiveness, along with FEDER funding (Project: BIA2017-85098-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Role of the social dimension on the sustainability-oriented maintenance optimization of bridges in coastal environments

  • Navarro -Martinez, Ignacio Javier
  • Yepes, V.|||0000-0001-5488-6001
  • Martí Albiñana, José Vicente|||0000-0002-2435-4095
[EN] The recently established Sustainable Development Goals recognize the importance of infrastructures for achieving a sustainable future. Along their long-lasting life cycle, infrastructures generate a series of impacts, the reduction of which has been one of the main focus of researchers¿ attention in the past years. The optimization of maintenance intervals of structures, such as bridges, has aroused the attention of the civil engineering sector, since most of the impacts of infrastructures occur during the operational phase. Thus, bridges are currently designed to attend the economic and environmental impacts derived from maintenance activities. However, the social pillar of sustainability is usually neglected in those analyses. Since no universally accepted methodology does yet exist for its consistent evaluation, the social dimension is not effectively included in the life cycle assessments of infrastructures. This communication evaluates the life cycle impacts of alternative concrete bridge deck designs in a maintenance-demanding environment near shore. Reliability-derived maintenance intervals are first optimized by minimizing the economic and environmental impacts. In a second stage of the analysis, the social dimension is included in the optimization process and results are compared. Optimization results from these combined assessments are obtained applying the Multi-Criteria Decision-Making technique AHP-TOPSIS. The present paper demonstrates how the inclusion of the social dimension may lead to different, more sustainability-oriented optimal maintenance strategies. The three-dimensional approach applied here has resulted in other alternatives to be preferred against those derived from the conventional assessment that considers the economic and environmental perspectives. Such finding supports the idea that holistic life cycle assessments are required for sustainable designs of infrastructures and that more efforts are urgently needed to integrate the social dimension in sustainability assessments of structures., The authors acknowledge the financial support of the Spanish Ministry of Economy and Competitiveness, along with FEDER funding (Project: BIA2017-85098-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Enhancing sustainability and resilience through multi-level infrastructure planning

  • Salas, Jorge
  • Yepes, V.|||0000-0001-5488-6001
[EN] Resilient planning demands not only resilient actions, but also resilient implementation, which promotes adaptive capacity for the attainment of the planned objectives. This requires, in the case of multi-level infrastructure systems, the simultaneous pursuit of bottom-up infrastructure planning for the promotion of adaptive capacity, and of top-down approaches for the achievement of global objectives and the reduction of structural vulnerabilities and imbalances. Though several authors have pointed out the need to balance bottom-up flexibility with top-down hierarchical control for better plan implementation, very few methods have yet been developed with this aim, least of all with a multi-objective perspective. This work addressed this lack by including, for the first time, the mitigation of urban vulnerability, the improvement of road network condition, and the minimization of the economic cost as objectives in a resilient planning process in which both actions and their implementation are planned for a controlled, sustainable development. Building on Urban planning support system (UPSS), a previously developed planning tool, the improved planning support system affords a planning alternative over the Spanish road network, with the best multi-objective balance between optimization, risk, and opportunity. The planning process then formalizes local adaptive capacity as the capacity to vary the selected planning alternative within certain limits, and global risk control as the duties that should be achieved in exchange. Finally, by means of multi-objective optimization, the method reveals the multi-objective trade-offs between local opportunity, global risk, and rights and duties at local scale, thus providing deeper understanding for better informed decision-making., This research was funded by the Spanish Ministry of Economy and Competitiveness, along with FEDER, grant number Project: BIA2017-85098-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Reliability-based maintenance optimization of corrosion preventive designs under a life cycle perspective

  • Navarro -Martinez, Ignacio Javier
  • Martí Albiñana, José Vicente|||0000-0002-2435-4095
  • Yepes, V.|||0000-0001-5488-6001
[EN] Sustainability is of paramount importance when facing the design of long lasting, maintenance demanding structures. In particular, a sustainable life cycle design for concrete structure exposed to aggressive environments may lead to significant economic savings, and to reduced environmental consequences. The present study evaluates 18 different design alternatives for an existing concrete bridge deck exposed to chlorides, analyzing the economic and environmental impacts associated with each design as a function of the maintenance interval chosen. Results are illustrated in the context of a reliability-based maintenance optimization on both life cycle costs and life cycle environmental impacts. Maintenance optimization results in significant reductions of life cycle impacts if compared to the damage resulting from performing the maintenance actions when the end of the service life of the structure is reached. The use of concrete with 10% silica fume has been shown to be the most effective prevention strategy against corrosion of reinforcement steel in economic terms, reducing the life cycle costs of the original deck design by 76%. From an environmental perspective, maintenance based on the hydrophobic treatment of the concrete deck surface results in the best performance, allowing for a reduction of the impacts associated with the original design by 82.8%., The authors acknowledge the financial support of the Spanish Ministry of Economy and Competitiveness, along with FEDER funding (Project: BIA2017-85098-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Application of flipped learning to the life cycle assessment of a composite pedestrian bridge

  • Martínez-Muñoz, D.|||0000-0002-6906-3830
  • Martí Albiñana, José Vicente|||0000-0002-2435-4095
  • Yepes, V.|||0000-0001-5488-6001
  • Ata-Ali, N.
[EN] This study describes the introduction of the life cycle assessment methodology to a postgraduate course through a flipped classroom. The analysis was carried out in the subject predictive models and optimization of concrete structures framed within the studies of the Master s Degree in Concrete Engineering. In this course, students are introduced to optimization methods through the application of algorithms, as well as other concepts, such as multi-criteria decision-making, the design of experiments and predictive and regression methods. In this case, the life cycle assessment of a 28 m span length steel-concrete composite pedestrian bridge was carried out. The section consists of a steel beam topped by a concrete slab. For this, computer tools were used that implement different scenarios to model the different possibilities. The database used was Ecoinvent and the software employed to assess the life cycle of the structure was openLCA, developed by Greendelta. This methodology allows the student to acquire transversal competencies, such as ethical and environmental responsibility, knowledge of contemporary problems, critical thinking and the use of specific instruments, all of them framed within the institutional project of the Universitat Politècnica de València. This work also presents future studies related to the life cycle assessment of footbridges, not only from energy and environmental points of view, but also accounting for economic and social factors. This learning process was achieved with a reverse teaching methodology that allows the student to acquire knowledge in a more efficient way., The authors acknowledge the support received from the Ministry of Economy and Business and the FEDER funding (Research Project BIA2017-85098-R) and the Universitat Politècnica de València (EXCELCON Educational Innovation and Quality Team).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Embodied Energy Optimization of Buttressed Earth-Retaining Walls with Hybrid Simulated Annealing

  • Martínez-Muñoz, D.|||0000-0002-6906-3830
  • Martí Albiñana, José Vicente|||0000-0002-2435-4095
  • Yepes, V.|||0000-0001-5488-6001
  • García, José
[EN] The importance of construction in the consumption of natural resources is leading structural design professionals to create more efficient structure designs that reduce emissions as well as the energy consumed. This paper presents an automated process to obtain low embodied energy buttressed earth-retaining wall optimum designs. Two objective functions were considered to compare the difference between a cost optimization and an embodied energy optimization. To reach the best design for every optimization criterion, a tuning of the algorithm parameters was carried out. This study used a hybrid simulated optimization algorithm to obtain the values of the geometry, the concrete resistances, and the amounts of concrete and materials to obtain an optimum buttressed earth-retaining wall low embodied energy design. The relation between all the geometric variables and the wall height was obtained by adjusting the linear and parabolic functions. A relationship was found between the two optimization criteria, and it can be concluded that cost and energy optimization are linked. This allows us to state that a cost reduction of €1 has an associated energy consumption reduction of 4.54 kWh. To achieve a low embodied energy design, it is recommended to reduce the distance between buttresses with respect to economic optimization. This decrease allows a reduction in the reinforcing steel needed to resist stem bending. The difference between the results of the geometric variables of the foundation for the two-optimization objectives reveals hardly any variation between them. This work gives technicians some rules to get optimum cost and embodied energy design. Furthermore, it compares designs obtained through these two optimization objectives with traditional design recommendations., The authors acknowledge the financial support of the Spanish Ministry of Economy and Business, along with FEDER funding (DIMALIFE Project: BIA2017-85098-R) and the Spanish Ministry of Science, Innovation and Universities for David Martínez-Muñoz University Teacher Training Grant (FPU18/01592). They would also like to emphasize that José García was supported by the Grant CONICYT/FONDECYT/INICIACION/11180056.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Multi-criteria assessment of alternative sustainable structures for a self-promoted, single-family home

  • Sánchez-Garrido, Antonio J.
  • Yepes, V.|||0000-0001-5488-6001
[EN] In the architecture sector, single-family housing projects are often linked to demand from private clients, without arousing very much interest from developers, who seek higher returns on other real estate assets. For any owner, the construction of a home is perhaps the biggest investment of their life, and success or failure will therefore depend on the right decision. This paper presents a study of three different structural alternatives that are applied to a terraced house to facilitate decision making by a self-promoter, based on multiple criteria and taking sustainability into consideration. The methodology used allows us to identify the structure and to evaluate the different alternatives proposed here in order to find the optimal option. A comparison is drawn between a traditional reference solution, a pre-cast design and finally a technological option based on an integral reinforced concrete structural system. Although the technical feasibility of these last two solutions has been proven, they have not yet received enough attention from researchers to allow the thermal envelope of the building to be solved at the same time as the structure itself. The last of these alternatives achieved the best valuation, although it is neither the most widely used alternative or the quickest to build. This study demonstrates the practical versatility of a method that is seldom used in residential construction and only rarely used for single-family homes. We evaluate three alternatives for optimizing the structure and enveloping walls of a self-promoted, terraced house from a sustainability perspective. The study provides a set of indicators for assessing the environmental, economic and social aspects of a building throughout its life cycle. The sustainability index of the structural envelope obtained in this way allows a self-promoter to prioritize solutions to ensure its global sustainability., The authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, along with FEDER funding (Project: BIA2017-85098-R). The authors would also like to express their gratitude to the companies that provided some of the data and information necessary to carry out this work (Plataforma Logistica YTONG Sur BigMat Multipio and Elesdopa (c) International).
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Diseño de experimentos factorial completo aplicado al proyecto de muros de contención

  • Martínez-Muñoz, David
  • Yepes, Víctor
  • Martí, José V.
This paper applies a complete factorial design to a five-meter wall to evaluate which variables most influence the response. This method is used for two target functions, CO2 emissions and the cost of the structure. To do this, 32 evaluations of the structure are performed using a computer program and a statistical analysis is carried out. The results of this analysis show that the most statistically representative factor is the thickness of the wall and the length of the toe is of little importance for both target functions. The result of the models considering only the variables without the interaction results in an R2 greater than 95%, so the interaction between variables, although it is proven to exist, is not relevant to the case study. This methodology allows to reduce the complexity of structural problems, reducing the number of variables.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Metodología para valorar la sostenibilidad con baja influencia de los decisores

  • Penadés-Plà, V.
  • Yepes, Víctor
  • García-Segura, T.
The goal of achieving sustainable structures involves a set of criteria that are usually opposed. This leads to the need to create a decision-making process. In every decision-making process there are subjective assessments that depend on the decision-maker. This is why decision-makers become an important part of the process because of their subjective assessment. This paper proposes a methodology in which the subjective assessment of the decision-maker in the assessment of sustainability in structures is reduced. Different processes are applied to reduce uncertainty in decision-making processes. In the first place the analysis of main components is applied, in the second place the optimization based on kriging, and finally the AHP method. All this is applied to a continuous concrete deck of beams for pedestrian walkways to achieve sustainable designs, reducing the complexity in making decisions on the most sustainable solution.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Aplicación de optimización kriging para la búsqueda de estructuras óptimas robustas

  • Yepes, Víctor
  • Penadés-Plà, V.
  • García-Segura, T.
All the structural problems have an associated variability or uncertainty. In the design of structures there are parameters such as the dimensions of the structure, the mechanical characteristics of the materials or the loads that can have variations with respect to the design value. The goal of the robust design optimization is to obtain the design that is optimum and is less sensitive to variations of these uncertain initial parameters. The main limitation of the robust design optimization is the high computational cost required due to the high number of optimizations that must be made to assess the sensitivity of the objective response of the problem. For this reason, kriging model is applied to carry out the optimization process more efficiently. In this work, it is going to apply the robust design optimization on a continuous pedestrian bridge of prestressed concrete and box section.