Skip to main content

TOMA DE DECISIONES EN LA GESTION DEL CICLO DE VIDA DE PUENTES PRETENSADOS DE ALTA EFICIENCIA SOCIAL Y MEDIOAMBIENTAL BAJO PRESUPUESTOS RESTRICTIVOS

BIA2014-56574-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2014
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 31
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Heuristics in optimal detailed design of precast road bridges

  • Yepes, V.|||0000-0001-5488-6001
  • Martí Albiñana, José Vicente|||0000-0002-2435-4095
  • García-Segura, Tatiana|||0000-0002-7059-0566
  • Gonzalez Vidosa, Fernando
[EN] This paper deals with the cost optimization of road bridges consisting of concrete slabs prepared in situ and two precast-prestressed U-shaped beams of self-compacting concrete. It shows the efficiency of four heuristic algorithms applied to a problem of 59 discrete variables. The four algorithms are the Descent Local Search (DLS), a threshold accepting algorithm with mutation operation (TAMO), the Genetic Algorithm (GA), and the Memetic Algorithm (MA). The heuristic optimization algorithms are applied to a bridge with a span length of 35 m and a width of 12 m. A performance analysis is run for the different heuristics, based on a study of Pareto optimal solutions between execution time and efficiency. The best results were obtained with TAMO for a minimum cost of 104184 euros. Among the key findings of the study, the practical use of these heuristics in real cases stands out. Furthermore, the knowledge gained from the investigation of the algorithms allows a range of values for the design optimization of such structures and pre-dimensioning of the variables to be recommended., The Spanish Ministry of Economy and Competitiveness along with FEDER funding (research project BIA2014-56574-R) financially supported this research. The authors are grateful for the thorough revision of the manuscript by Phillip Zastrow and Francisca Molina-Moreno.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Lifetime reliability-based optimization of post-tensioned box-girder bridges

  • García-Segura, Tatiana|||0000-0002-7059-0566
  • Yepes, V.|||0000-0001-5488-6001
  • Frangopol, D.M.
  • Yang, D.Y.
[EN] This paper presents a lifetime reliability-based approach for the optimization of post-tensioned concrete box-girder bridges under corrosion attack. The proposed approach is illustrated by determining the optimal life-cycle cost and CO2 emissions of several initial designs of post-tensioned box-girder bridges with different objectives, i.e. the lowest initial costs, the longest corrosion initiation time, or the maximum safety. The study was conducted in two steps. Firstly, the Pareto set presents initial designs considering the cross-section geometry, the concrete strength, the reinforcing steel and the prestressing steel. Secondly, the maintenance optimization was conducted with the proposed method, aimed at minimizing the economic, environmental and societal impacts of the bridge while satisfying the reliability target during its life-span. Effective maintenance is able to extend the service life of the bridge with the minimum cost and CO2 emissions. It is indicated that a durability-conscious initial design is particularly beneficial for life-cycle performance. Besides, the emphasis on the initial design can also have an effect on the life-cycle performance of bridges. It is found that designs with longer corrosion initiation time are associated with lower life-cycle cost, especially when using concrete of higher strength. Findings from the current paper also indicate that optimal maintenance strategies are more likely to be those with fewer maintenance actions that repair all deteriorating structures simultaneously., The authors acknowledge the financial support of the Spanish Ministry of Economy and Competitiveness, along with FEDER funding (BRIDLIFE Project: BIA2014-56574-R) and the Research and Development Support Program of Universitat Politècnica de València (PAID-02-15).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Optimization of buttressed earth-retaining walls using hybrid harmony search algorithms

  • Molina Moreno, Francisca
  • García-Segura, Tatiana|||0000-0002-7059-0566
  • Martí Albiñana, José Vicente|||0000-0002-2435-4095
  • Yepes, V.|||0000-0001-5488-6001
This paper represents an economic optimization of buttressed earth-retaining walls. We explore the optimum solutions using a harmony search with an intensification stage through threshold accepting. The calibration of the resulting algorithm has been obtained as a result of several test runs for different parameters. A design parametric study was computed to walls in series from 4 to 16 m total height. The results showed different ratios of reinforcement per volume of concrete for three types of ground fill. Our main findings confirmed that the most sensitive variable for optimum walls is the wall-friction angle. The preference for wall-fill friction angles different to 0 in project design is confirmed. The type of fill is stated as the main key factor affecting the cost of optimum walls. The design parametric study shows that the soil foundation bearing capacity substantially affects costs, mainly in coarse granular fills (F1). In that sense, cost-optimum walls are less sensitive to the bearing capacity in mixed soils (F2) and fine soils of low plasticity (F3). Our results also showed that safety against sliding is a more influential factor for optimum buttressed walls than the overturning constraint. Finally, as for the results derived from the optimization procedure, a more suitable rule of thumb to dimension the footing thickness of the footing is proposed., This research was funded by the European Institute of Innovation and Technology under grant agreement no 20140262 Low Carbon Strategy in the Construction Industry (PGA_APED0094_2014-2.1-278-P066-10) and the Spanish Ministry of Economy and Competitiveness along with FEDER funding (Project BIA2014-56574-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Multi-objective design of post-tensioned concrete road bridges using artificial neural networks

  • García-Segura, Tatiana|||0000-0002-7059-0566
  • Yepes, V.|||0000-0001-5488-6001
  • Frangopol, D.M.
[EN] In order to minimize the total expected cost, bridges have to be designed for safety and durability. This paper considers the cost, the safety, and the corrosion initiation time to design post-tensioned concrete box-girder road bridges. The deck is modeled by finite elements based on problem variables such as the cross-section geometry, the concrete grade, and the reinforcing and post-tensioning steel. An integrated multi-objective harmony search with artificial neural networks (ANNs) is proposed to reduce the high computing time required for the finite-element analysis and the increment in conflicting objectives. ANNs are trained through the results of previous bridge performance evaluations. Then, ANNs are used to evaluate the constraints and provide a direction towards the Pareto front. Finally, exact methods actualize and improve the Pareto set. The results show that the harmony search parameters should be progressively changed in a diversification-intensification strategy. This methodology provides trade-off solutions that are the cheapest ones for the safety and durability levels considered. Therefore, it is possible to choose an alternative that can be easily adjusted to each need., The authors acknowledge the financial support of the Spanish Ministry of Economy and Competitiveness, along with FEDER funding (BRIDLIFE Project: BIA2014-56574-R) and the Research and Development Support Program of Universitat Politecnica de Valencia (PAID-02-15).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Market demands on construction management: A view from graduate students

  • Pellicer, Eugenio|||0000-0001-9100-0644
  • Yepes, V.|||0000-0001-5488-6001
  • Carrión García, Andrés|||0000-0002-0953-2500
  • Ortega Llarena, Alejandro Javier
[EN] The construction industry demands managerial skills for professionals working within it, especially from those having an undergraduate civil engineering degree, which is generally pursued through graduate programs [master of science (M.Sc.) degrees] in the construction management field. This paper checks how graduate students views are relevant in order to assess and improve these M.Sc. programs. The research is performed through a survey based on a sample of 534 graduate students from several American and European universities. Using confirmatory factor analysis with the survey data, it has been corroborated that the construction management field can be mapped according to two dimensions: infrastructure lifecycle and organizational breakdown. Furthermore, by means of an exploratory factor analysis, six components or approaches for a graduate program in the construction management field are highlighted as important by the respondents: leadership, built environment stakeholders, innovation and quality, economics, business management, and project management. The organizational point of view is clearly identified by the students: its four variables are highlighted as principal components. However, regarding the infrastructure lifecycle, certain important facets, such as feasibility analysis and operation and maintenance of infrastructure, are considered by graduate students less important than classical design and construction. The findings of this research can help improve the curricula of graduate programs in the construction management field., The authors are indebted to Professors Luis F. Alarcón, Salvador García, David Eaton, Pawel Nowak, Gloria I. Carvajal, Sheyla M. B. Serra, Carlos T. Formoso, M. Dolores Martinez-Aires, and José C. Teixeira for their collaboration throughout this study. The authors also thank all the participants in the study. The questionnaire survey was possible due to partial support from the following agencies and projects: CYTED (Project GESST-IC, Network 309RT0375), European Commission (Life Long Learning Program, Project MBAIC, Grant No. 2013-1-PL1-LEO05-37822), and Spanish Ministry of Economy and Competitiveness (Project BRIDLIFE, Grant No. BIA2014-56574-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

METHOD FOR ESTIMATING THE SOCIAL SUSTAINABILITY OF INFRASTRUCTURE PROJECTS

  • Sierra Varela, Leonardo Andrés
  • Pellicer, Eugenio|||0000-0001-9100-0644
  • Yepes, V.|||0000-0001-5488-6001
[EN] Nowadays, sustainability assessments tend to focus on the biophysical and economic considerations of the built environment. Social facets are generally underestimated when the appraisal of investment in infrastructure projects is carried out. This study proposes a method to estimate the contribution of infrastructure projects to social sustainability. This method takes into account the interactions of an infrastructure with its environment, in terms of the potential for short and long-term social improvement. The method is structured in five stages:(1) social improvement criteria and goals to be taken into account are identified and weighed; (2) an exploratory study is conducted to determine transfer functions;(3) each criterion is homogenized through value functions; (4) the short and long-term social improvement indices are established; and finally, (5) social improvement indices are contrasted to identify the socially selected alternatives and to assign an order of priority. The method was implemented in six alternatives of road infrastructure improvement. The results of the analysis show that the method can distinguish the contribution to social sustainability of different infrastructure projects and location contexts. This article proposes a mechanism to measure the social efficiency of projects according to the early benefits and potential long-term equitable improvement. This method can be applied prior to the implementation of a project and can complement environmental and economic sustainability assessments., This research was funded by the Government of Chile under Doctoral Fellowship Program Abroad (grant CONICYT-2015/ 72160059) and the Spanish Ministry of Economy and Competitiveness along with FEDER funding (project BIA2014-56574- R). The authors are grateful to the United Nation Development Programme and the Ministry of Public Works, Transportation, Housing and Urban Development, both of El Salvador, for their participation in the implementation of the proposed method (Project 00074250).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Assessing the social sustainability contribution of an infrastructure project under conditions of uncertainty

  • Sierra Varela, Leonardo Andrés
  • Yepes, V.|||0000-0001-5488-6001
  • Pellicer, Eugenio|||0000-0001-9100-0644
[EN] Assessing the viability of a public infrastructure includes economic, technical and environmental aspects; however, on many occasions, the social aspects are not always adequately considered. This article proposes a procedure to estimate the social sustainability of infrastructure projects under conditions of uncertainty, based on a multicriteria deterministic method. The variability of the method inputs is contributed by the decision-makers. Uncertain inputs are treated through uniform and beta PERT distributions. The Monte Carlo method is used to propagate uncertainty in the method. A case study of a road infrastructure improvement in El Salvador is used to illustrate this treatment. The main results determine the variability of the short and long-term social improvement indices by infrastructure and the probability of the position in the prioritization of the alternatives. The proposed mechanism improves the reliability of the decision making early in infrastructure projects, taking their social contribution into account. The results can complement environmental and economic sustainability assessments., This research was funded by the Government of Chile under the Doctoral Fellowship Program Abroad (grant CONICYT-2015/ 72160059) and the Spanish Ministry of Economy and Competitiveness along with FEDER funding (project BIA2014-56574-R). The authors are grateful to the United Nations Development Programme and the Ministry of Public Works, Transportation, Housing and Urban Development of El Salvador, for their participation in the implementation of the proposed method (Project 00074250).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A Review of Multi-Criteria Assessment of the Social Sustainability of Infrastructures

  • Sierra-Varela, Leonardo Andres
  • Yepes, V.|||0000-0001-5488-6001
  • Pellicer, Eugenio|||0000-0001-9100-0644
[EN] Nowadays multi-criteria methods enable non-monetary aspects to be incorporated into the assessment of infrastructure sustainability. Yet evaluation of the social aspects is still neglected and the multi-criteria assessment of these social aspects is still an emerging topic. Therefore, the aim of this article is to review the current state of multi-criteria infrastructure assessment studies that include social aspects. The review includes an analysis of the social criteria, participation and assessment methods. The results identify mobility and access, safety and local development among the most frequent criteria. The Analytic Hierarchy Process and Simple Additive Weighting methods are the most frequently used. Treatments of equity, uncertainty, learning and consideration of the context, however, are not properly analyzed yet. Anyway, the methods for implementing the evaluation must guarantee the social effect on the result, improvement of the representation of the social context and techniques to facilitate the evaluation in the absence of information., This research was funded by the Government of Chile under the Doctoral Fellowship Program Abroad (grant CONICYT-2015/72160059), the project DIUFRO DI14-0096 and the Spanish Ministry of Economy and Competitiveness along with FEDER funding (Projects BIA2014-56574-R and BIA2017-85098-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Multivariate correspondence analysis in optimization studies of concrete bridges

  • Yepes, V.|||0000-0001-5488-6001
  • Gonzalez Vidosa, Fernando
  • Martí Albiñana, José Vicente|||0000-0002-2435-4095
  • Marmaneu, Alfredo
[EN] The socio-cultural situation in which we find ourselves today, with limited budgets, greater awareness of the environment and high levels of gas emissions into the atmosphere, makes the future in general and the construction of structures in particularly aimed at finding designs that are more efficient. Since the 60s of last century to the present, several research groups spread across the five continents have tried to carry out optimization studies of concrete bridges, either the bridge in general and some of its elements in particular, publishing articles in scientific journals world-class. The featured paper extracts some qualitative variables defined and parameterized by reading that articles published over the years and it makes a simple multivariate correspondence analysis (SMCA). A sample of 93 articles has been analyzed and seven variables has been extracted from its. The two overall objectives are to determine whether the dependency relationships between different categories that the variables can take are statistically significant and to define possible new lines of research. Therefore, SMCA is divided into 10 pairs of variables namely ten independent studies. The software used has been IBM SPSS Statistics 21. The results show that the type of optimization problem resolution are related to the development of technology and computers, that genetic algorithms are related with maintenance phase, or that the optimization design of I-beam bridges is related with prestressed concrete among other. Finally, the thesis concludes that the optimization concrete bridge in construction phases or with special type of concrete could be new lines of research., Este estudio ha sido financiado por el Ministerio Español de Economía y Competitividad y fondos FEDER (proyecto de investigación BIA2014-56574-R)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Parametric study of concrete box-girder footbridges

  • Yepes, V.|||0000-0001-5488-6001
  • Alcalá-González, Julián|||0000-0003-1376-8441
  • García-Segura, Tatiana|||0000-0002-7059-0566
  • Pérez-López, E.
[EN] This paper presents a study of the parametric variability of post-tensioned concrete box-girder pedestrian bridges. SAMO2 algorithm is used for the parametric study. This algorithm combines SA with a mutation operator, to find the economic solutions. A span-length parametric study analyzes the characteristics for the best design of a three-span deck in which the main span ranges from 30 to 60 m. The depth and the number of strands were adjusted according to span length, while the thickness of the slabs presented the same optimum values in all cases. Results show that the amount of steel and volume of concrete per square meter of deck shows a good correlation with the main span length. This study demonstrates that by increasing the main span length by one meter, the total cost per square meter of the deck increases by 6.38 euros on average. Thus, this paper shows the relationship between the span length and geometrical and steel variables to produce and build a cost-efficient pedestrian bridge., This research was financially supported by the Spanish Ministry of Economy and Competitiveness along with FEDER funding (Project BIA2014- 56574-R and Project BIA2017-85098-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A systematic review of application of multi-criteria decision analysis for aging-dam management

  • Zamarrón-Mieza, Iván
  • Moreno-Jiménez, José María
  • Yepes, V.|||0000-0001-5488-6001
[EN] Decisions for aging-dam management requires a transparent process to prevent the dam failure, thus to avoid severe consequences in socio-economic and environmental terms. Multiple criteria analysis arose to model complex problems like this. This paper reviews specific problems, applications and Multi-Criteria Decision Making techniques for dam management. Multi-Attribute Decision Making techniques had a major presence under the single approach, specially the Analytic Hierarchy Process, and its combination with Technique for Order of Preference by Similarity to Ideal Solution was prominent under the hybrid approach; while a high variety of complementary techniques was identified. A growing hybridization and fuzzification are the two most relevant trends observed. The integration of stakeholders within the decision making process and the inclusion of trade-offs and interactions between components within the evaluation model must receive a deeper exploration. Despite the progressive consolidation of Multi-Criteria Decision Making in dam management, further research is required to differentiate between rational and intuitive decision processes. Additionally, the need to address benefits, opportunities, costs and risks related to repair, upgrading or removal measures in aging dams suggests the Analytic Network Process, not yet explored under this approach, as an interesting path worth investigating., This research was funded by the Spanish Ministry of Economy and Competitiveness along with FEDER funding (Projects BIA201456574-R and ECO2015-66673-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Cost sensitivity analysis in bridges design

  • Martí Albiñana, José Vicente|||0000-0002-2435-4095
  • Gonzalez Vidosa, Fernando
  • Yepes, V.|||0000-0001-5488-6001
[EN] The application of metaheuristic techniques enables optimizing structures for economic aspects, greenhouse effects, energy consumption and other life cycle impacts. Structural designs obtained with the application of the heuristic algorithms vary according to the above mentioned objectives and with the values of the parameters determined by the boundary conditions of structures and materials. The featured paper presents the cost optimization of prestressed concrete (PC) precast road bridges. The beam has a U-shape cross-section. The deck has a span of 35 m and 12 m in width. The Simulated Annealing algorithm (SA) is used for obtaining the cross-section transverse geometric dimensions, the concrete class and the active and passive reinforcement amounts. Our example is defined by 59 discrete design variables. SA algorithm requires the calibration of the initial temperature, the number of variables modified in each iteration, the length of the Markov chains and the cooling coefficient. It all is subject to the Spanish Structural Concrete Code EHE. The overall objective is to determine whether the structural design is influenced by the unit prices. Hence, different economic scenarios are presented where the concrete and steel unit prices vary. The results show that the application of heuristic techniques delivers structural designs that adapt to the variation of unit prices, in order to reduce the overall cost of the resulting structural design. In this study, an increment in the steel price leads to a reduction in the steel amount, increasing the concrete amount, and vice versa., Este estudio ha sido financiado por el Ministerio Español de Economía y Competitividad y fondos FEDER (proyecto de investigación BIA2014-56574-R)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Multiobjective optimization of post-tensioned concrete box-girder road bridges considering cost, CO2 emissions, and safety

  • García-Segura, Tatiana|||0000-0002-7059-0566
  • Yepes, V.|||0000-0001-5488-6001
This paper presents a multiobjective optimization of post-tensioned concrete road bridges in terms of cost, CO2 emissions, and overall safety factor. A computer tool links the optimization modulus with a set of modules for the finite-element analysis and limit states verification. This is applied for the case study of a three-span continuous post-tensioned box-girder road bridge, located in a coastal region. A multiobjective harmony search is used to automatically search a set of optimum structural solutions regarding the geometry, concrete strength, reinforcing and post-tensioned steel. Diversification strategies are combined with intensification strategies to improve solution quality. Results indicate that cost and CO2 emissions are close to each other for any safety range. A one-euro reduction, involves a 2.34 kg CO2 emissions reduction. Output identifies the best variables to improve safety and the critical limit states. This tool also provides bridge managers with a set of trade-off optimum solutions, which balance their preferences most closely, and meet the requirements previously defined., The authors acknowledge the financial support of the Spanish Ministry of Economy and Competitiveness, along with FEDER funding (BRIDLIFE Project: BIA2014-56574-R) and the Research and Development Support Program of Universitat Politecnica de Valencia (PAID-02-15).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Desarrollo y evaluación de la competencia transversal “pensamiento crítico” en el grado de ingeniería civil

  • Yepes, V.|||0000-0001-5488-6001
  • Martí Albiñana, José Vicente|||0000-0002-2435-4095
  • García-Segura, Tatiana|||0000-0002-7059-0566
[EN] This paper presents a methodology for assessing the cross disciplinary competence ‘critical thinking’ of the Civil Engineering undergraduate degree, in the subject of “Construction Methods II” of the 2nd year. An individual- and a group work based on the discussion of a construction method required for a bridge and its foundations is presented. This activity assesses both, the critical thinking competence on a rubric-based grading and the subject specific competences. A statistical-, a correlation analysis as well as multiple linear regressions of the group works and the individual exam marks were performed. Results show that nearly three-quarters of the students have achieved sufficient proficiency. However, results show a weak connection between the specific- and the cross-disciplinary competences. These evidences demonstrate that the acquisition of critical thinking competence is encouraged by the group work discussion. Nevertheless, the acquisition of specific competences requires not only a group work, but also an individual work.., [ES] La comunicación presenta una metodología para el desarrollo y evaluación de la competencia transversal “pensamiento crítico” en el grado de ingeniería civil, en el ámbito de la asignatura “Procedimientos de Construcción II” de segundo curso. Se presenta una actividad de trabajo individual y en grupo basada en la discusión del procedimiento constructivo de un puente y de sus cimentaciones. Dicha actividad permite la evaluación de la competencia de “pensamiento crítico” basada en una rúbrica, así como la evaluación de competencias específicas de la asignatura. Se ha realizado un análisis estadístico, de correlación y de regresión lineal múltiple de las calificaciones obtenidas en la actividad y en la prueba de evaluación contínua individual. Los resultados muestran como casi tres cuartas partes de los alumnos han alcanzado suficientemente la competencia. Sin embargo, los resultados muestran cierta desconexión entre los resultados relativos a las competencias específicas y los resultados relativos a la competencia transversal. Estas evidencias manifiestan que la adquisición de la competencia transversal del pensamiento crítico se ve favorecida por los trabajos de discusión en grupo. No obstante, la adquisición de competencias específicas por parte de los alumnos requiere no sólo de trabajos en grupo, sino también de trabajos individuales., Los autores agradecen el apoyo recibido por el Ministerio de Economía y Competitividad y de los fondos FEDER (Proyecto de Investigación BIA2014-56574-R) y por la Universitat Politècnica de València (Equipo de Innovación y Calidad Educativa EXCELCON).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Life-cycle sustainability design of post-tensioned box-girder bridge obtained by metamodel-assisted optimization and decision-making under uncertainty

  • Penadés Plà, Vicent
[EN] Currently, there is a trend towards sustainability, especially in developed countries, where the concerns of society about environmental degradation and social problems have increased. Following this trend, the construction sector is one of the most influential sectors due to its high economic, environmental, and social impacts. At the same time, there is an increase in the demand for transport, which drives a need to develop and maintain the necessary infrastructure for this purpose. Taking all these factors into account, bridges become a key structure and therefore assessment of sustainability throughout their whole life-cycle is essential. The main objective of this thesis is to propose a methodology that allows assessment of the sustainability of a bridge under uncertain initial conditions (subjectivity of the decision-maker or variability of initial parameters) and optimization of the design to obtain a robust optimal bridge. To this end, an extensive bibliographic review of all the works that perform assessments of the sustainability of bridges through the valuation of criteria related to their main pillars (economic, environmental, or social) has been carried out. In this review, it has been observed that the most comprehensive way to evaluate the environmental and social pillars is through the use of life-cycle impact assessment methods. These methods allow sustainability assessment to be performed for the whole life-cycle of the bridge. This process provides valuable information to decision-makers for the assessment and selection of the most sustainable bridge. However, the decision-makers' subjective assessments of the relative importance of the criteria influence the final assessment of sustainability. For this reason, it is necessary to create a methodology that reduces the associated uncertainty and seeks robust solutions according to the opinion of decision-makers. In addition, for bridges, the design and decision-making are conditioned by the initially defined parameters. This leads to solutions that may be sensitive to small changes in these initial conditions. A robust optimal design makes it possible to obtain optimal solutions and structurally stable designs under variations of the initial conditions as well as sustainable designs that are not influenced by the preferences of the stakeholders who are part of the decision-making process. Thus, obtaining a robust optimal design becomes a probabilistic optimization process that has a high computational cost. For this reason, the use of metamodels has been integrated into the proposed methodology. Specifically, Latin hypercube sampling is used for the definition of the initial sample and a kriging model is used for the definition of the mathematical approximation. In this way, kriging-based heuristic optimization reduces the computational cost by more than 90% with respect to conventional heuristic optimization while obtaining very similar results. This thesis provides, first of all, an extensive bibliographic review of both the criteria used for the assessment of sustainability of bridges and the different methods of life-cycle impact assessment to obtain a complete profile of the environmental and social pillars. Subsequently, a methodology is defined for the full assessment of sustainability, using life-cycle impact assessment methods. Likewise, an approach is proposed that makes it possible to obtain structures with little influence from the structural parameters, as well as from the preferences of the different decision-makers regarding the sustainability criteria. The methodology provided in this thesis is applicable to any other type of structure., [ES] Actualmente existe una tendencia hacia la sostenibilidad, especialmente en los países desarrollados donde la preocupación de la sociedad por el deterioro ambiental y los problemas sociales ha aumentado. Siguiendo esta tendencia, el sector de la construcción es uno de los sectores que mayor influencia tiene debido a su alto impacto económico, ambiental y social. Al mismo tiempo, existe un incremento en la demanda de transporte que provoca la necesidad de desarrollo y mantenimiento de las infraestructuras necesarias para tal fin. Con todo esto, los puentes se convierten en una estructura clave, y por tanto, la valoración de la sostenibilidad a lo largo de toda su vida es esencial. El objetivo principal de esta tesis es proponer una metodología que permita valorar la sostenibilidad de un puente bajo condiciones iniciales inciertas (subjetividad del decisor o variabilidad de parámetros iniciales) y optimizar el diseño para obtener puentes óptimos robustos. Para ello, se ha realizado una extensa revisión bibliográfica de todos los trabajos en los que se realiza un análisis de la sostenibilidad mediante la valoración de criterios relacionados con sus pilares principales (económico, medio ambiental o social). En esta revisión, se ha observado que la forma más completa de valorar los pilares medioambientales y sociales es mediante el uso de métodos de análisis de ciclo de vida. Estos métodos permiten llevar a cabo la valoración de la sostenibilidad durante todas las etapas de la vida de los puentes. Todo este procedimiento proporciona información muy valiosa a los decisores para la valoración y selección del puente más sostenible. No obstante, las valoraciones subjetivas de los decisores sobre la importancia de los criterios influyen en la evaluación final de la sostenibilidad. Por esta razón, es necesario crear una metodología que reduzca la incertidumbre asociada y busque soluciones robustas frente a las opiniones de los agentes implicados en la toma de decisiones. Además, el diseño y toma de decisiones en puentes está condicionado por los parámetros inicialmente definidos. Esto conduce a soluciones que pueden ser sensibles frente a pequeños cambios en dichas condiciones iniciales. El diseño óptimo robusto permite obtener diseños óptimos y estructuralmente estables frente a variaciones de las condiciones iniciales, y también diseños sostenibles y poco influenciables por las preferencias de los decisores que forman parte del proceso de toma de decisión. Así pues, el diseño óptimo robusto se convierte en un proceso de optimización probabilística que requiere un gran coste computacional. Por este motivo, el uso de metamodelos se ha integrado en la metodología propuesta. En concreto, se ha utilizado hipercubo latino para la definición de la muestra inicial y los modelos kriging para la definción de la aproximación matemática. De esta forma, la optimización heurística basada en kriging ha permitido reducir más de un 90% el coste computacional respecto a la optimización heurística conveniconal obteniendo resultados muy similares. Esta tesis proporciona en primer lugar, una amplia revisión bibliográfica, tanto de los criterios utilizados para la valoración de la sostenibilidad en puentes como de los diferentes métodos de análisis de ciclo de vida para obtener un perfil completo de los pilares ambientales y sociales. Posteriormente, se define una metodología para la valoración completa de la sostenibilidad, usando métodos de análisis de ciclo de vida. Asimismo, se propone un enfoque que permite obtener estructuras poco influenciables por los parámetros estructurales, así como por las preferencias de los diferentes decisores frente a los criterios sostenibles. La metodología proporcionada en esta tesis es aplicable a cualquier otro tipo de estructura., [CA] Actualment existeix una tendència cap a la sostenibilitat, especialment en els països desenrotllats on la preocupació de la societat pel deteriori ambiental i els problemes socials ha augmentat. Seguint aquesta tendència, el sector de la construcció és un dels sectors que major influència té a causa del seu alt impacte econòmic, ambiental i social. Al mateix temps, existeix un increment en la demanda de transport que provoca la necessitat de desenrotll i manteniment de les infraestructures necessàries per a tal fi. En tot açò, els ponts es converteixen en una estructura clau, i per tant, la valoració de la sostenibilitat al llarg de tota la seua vida és essencial. L'objectiu principal d'aquesta tesi doctoral és proposar una metodologia que permeta valorar la sostenibilitat d'un pont baix condicions inicials incertes (subjectivitat del decisor o variabilitat dels paràmetres inicials) i optimitzar el disseny per a obtenir ponts òptims robusts. Per a això, s'ha realitzat una extensa revisió bibliogràfica de tots els treballs en els quals es realitza un anàlisis de la sostenibilitat mitjançant la valoració de criteris relacionats amb els seus pilars principals (econòmic, ambiental o social). En aquesta revisió s'ha observat que la forma més completa de valorar els pilars ambientals i socials és mitjançant l'ús de mètodes d'anàlisis de cicle de vida. Aquests mètodes permeten realitzar la valoració de la sostenibilitat al llarg de totes les etapes de la vida dels ponts. Tot aquest procediment proporciona informació molt valuosa als decisors per a la valoració i selecció del pont més sostenible. No obstant això, les valoracions subjectives dels decisors sobre la importància dels criteris influeixen en l'avaluació final de la sostenibilitat. Per aquesta raó, és necessari crear una metodologia que reduïsca la incertesa associada i busque solucions robustes enfront de les opinions dels agents implicats en la presa de decisions. A més, el disseny i la presa de decisions en ponts està condicionat pels paràmetres inicialment definits. Açò condueix a solucions que poden ser sensibles front a menuts canvis en les dites condicions inicials. El disseny òptim robust permet obtenir dissenys òptims i estructuralment estables front a variacions de les condicions inicials, i també dissenys sostenibles i poc influenciables per les preferències dels decisors que formen part del procés de presa de decisió. D'aquesta manera, el disseny òptim robust es converteix en un procés d'optimització probabilística que requereix un gran cost computacional. Per aquest motiu, l'ús de metamodels s'ha integrat en la metodologia proposta. En concret, s'ha utilitzat l'hipercub llatí per a la definició de la mostra inicial i els models kriging per a la definició de l'aproximació matemàtica. D'aquesta forma, l'optimització heurística basada en kriging ha permés reduir més d'un 90% el cost computacional respecte a l'optimització heurística convencional obtenint resultats molt similars. Aquesta tesi doctoral proporciona en primer lloc, una ampla revisió bibliogràfica, tant dels criteris utilitzats per a la valoració de la sostenibilitat en ponts com dels diferents mètodes d'anàlisis de cicle de vida per a obtenir un perfil complet dels pilars ambientals i socials. Posteriorment, es defineix una metodologia per a la valoració completa de la sostenibilitat, utilitzant mètodes d'anàlisis de cicle de vida. Així mateix, es proposa un enfocament que permet obtenir estructures poc influenciables pels paràmetres estructurals, així com per les preferències dels diferents decisors enfront dels criteris sostenibles. La metodologia proporcionada en aquesta tesi doctoral és aplicable a qualsevol altre tipus d'estructura. Nº de páginas:, I would like to acknowledge the economic support of the Spanish Ministry of Economy and Competitiveness, formerly called Spanish Ministry of Science and Innovation. This thesis has been possible thanks to the FPI fellowship and the financially support of BRIDLIFE (Research Project BIA2014-56574-R) and DIMALIFE (Project BIA2017-85098-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Life cycle assessment of cost-optimized buttress earth-retaining walls: A parametric study

  • Zastrow, P.
  • Molina Moreno, Francisca
  • García-Segura, Tatiana|||0000-0002-7059-0566
  • Martí Albiñana, José Vicente|||0000-0002-2435-4095
  • Yepes, V.|||0000-0001-5488-6001
In this paper life cycle assessments are carried out on 30 optimized earth-retaining walls of various heights (4e13 m) and involving different permissible soil stresses (0.2, 0.3 and 0.4 MPa) in Spain. Firstly, the environmental impacts considered in the assessment method developed by the Leiden University (CML 2001) are analyzed for each case, demonstrating the influence of the wall height and permissible soil stress. Secondly, this paper evaluates the contribution range of each element to each impact. The elements considered are: concrete, landfill, machinery, formwork, steel, and transport. Moreover, the influence of the wall height on the contribution of each element over the total impact is studied. This paper then provides the impact factors per unit of concrete, steel, and formwork. These values enable designers to quickly evaluate impacts from available measurements. Finally, the influence of steel recycling on the environmental impacts is highlighted. Findings indicate that concrete is the biggest contributor to all impact categories, especially the global warming potential. However, the steel doubles its contribution when the wall heights increase from 4 m to 13 m. Results show that recycling rates affect impacts differently., The authors acknowledge the financial support of the Spanish Ministry of Economy and Competitiveness, along with the FEDER funding (BRIDLIFE Project: BIA2014-56574-R) and from the European Institute of Innovation and Technology under grant agreement no 20140262 Low Carbon Strategy in the Construction Industry (PGA_APED0094_2014-2.1-278_P066-10). Additionally, authors acknowledge the contributions of Nadia Ata and Vicent Penades in the overall review process.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Bayesian network method for decision-making about the social sustainability of infrastructure projects

  • Sierra-Varela, Leonardo Andres
  • Yepes, V.|||0000-0001-5488-6001
  • García-Segura, Tatiana|||0000-0002-7059-0566
  • Pellicer, Eugenio|||0000-0001-9100-0644
[EN] Nowadays, sustainability assessment tends to focus on the biophysical and economic aspects of the built environment. The social aspects are generally overestimated during an infrastructure evaluation. This study proposes a method to optimize infrastructure projects by assessing their social contribution. This proposal takes into account the infrastructure¿s interactions with the local environment in terms of its potential contribution in the short and long term. The method is structured in three stages: (1) preparation of a decision-making model, (2) formulation of the model, and (3) implementation of the model through optimization of infrastructure projects from the social sustainability viewpoint. The theory of Bayesian reasoning and a harmony search optimization algorithm are used to carry out the research. The paper presents the application to a case study of a set of alternatives for road infrastructure projects in El Salvador. This approach creates a model of participative decision-making. The results show that the method can distinguish socially efficient alternatives from the short and long-term contributions. In addition, the results suggest that some variables are less sensitive to the short and long-term maximization, while others vary their values to improve one objective or the other. The findings are directly applied to a real case. The method can be employed in the infrastructure formulation and prioritization phases and complemented with economic and environmental sustainability assessments., This research was funded by the Government of Chile under the Doctoral Fellowship Abroad Program (grant CONICYT-2015/72160059) and the Spanish Ministry of Economy and Competitiveness along with FEDER funding (project BIA2014-56574-R). The authors are grateful to both the United Nations Development Programme and the Ministry of Public Works, Transportation, Housing and Urban Development of El Salvador for their participation in the implementation of the proposed method (Project 00074250).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Life-Cycle Assessment: A Comparison between Two Optimal Post-Tensioned Concrete Box-Girder Road Bridges

  • Penadés-Plà, Vicent
  • Martí Albiñana, José Vicente|||0000-0002-2435-4095
  • García-Segura, Tatiana|||0000-0002-7059-0566
  • Yepes, V.|||0000-0001-5488-6001
[EN] The goal of sustainability involves a consensus among economic, environmental and social factors. Due to climate change, environmental concerns have increased in society. The construction sector is among the most active high environmental impact sectors. This paper proposes new features to consider a more detailed life-cycle assessment (LCA) of reinforced or prestressed concrete structures. Besides, this study carries out a comparison between two optimal posttensioned concrete box-girder road bridges with different maintenance scenarios. ReCiPe method is used to carry out the life-cycle assessment. The midpoint approach shows a complete environmental profile with 18 impact categories. In practice, all the impact categories make their highest contribution in the manufacturing and use and maintenance stages. Afterwards, these two stages are analyzed to identify the process which makes the greatest contribution. In addition, the contribution of CO2 fixation is taken into account, reducing the environmental impact in the use and maintenance and end of life stages. The endpoint approach shows more interpretable results, enabling an easier comparison between different stages and solutions. The results show the importance of considering the whole life-cycle, since a better design reduces the global environmental impact despite a higher environmental impact in the manufacturing stage., The authors acknowledge the financial support of the Spanish Ministry of Economy and Competitiveness, along with FEDER funding (BRIDLIFE Project: BIA2014-56574-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Computer-support tool to optimize bridges automatically

  • García-Segura, Tatiana|||0000-0002-7059-0566
  • Yepes, V.|||0000-0001-5488-6001
  • Alcalá-González, Julián|||0000-0003-1376-8441
[EN] In bridge design, many variables like material grades, cross-sectional dimensions, passive and prestressing steel need to be modeled to evaluate structural performance. Efficiency gains are intended while satisfying the serviceability and ultimate limit states imposed by the structural code. In this paper, a computer-support tool is presented to analyze continuous post-tensioned concrete (PSC) box-girder road bridges, to minimize the cost as well as to provide optimum design variables. The program encompasses six modules to perform the optimization process, the finite-element analysis, and the limit states verification. The methodology is defined and applied to a case study. A harmony search (HS) algorithm optimizes 33 variables that define a three-span PSC box-girder bridge located in a coastal region. However, the same procedure could be implemented to optimize any structure. This tool enables one to define the fixed parameters and the variables that are optimized by the heuristic algorithm. Moreover, the output provides useful rules to guide engineers in designing PSC box-girder road bridges., The authors acknowledge the financial support of the Spanish Ministry of Economy and Competitiveness, along with FEDER funding (BRIDLIFE Project: BIA2014-56574-R) and the Research and Development Support Program of Universitat Politècnica de València (PAID-02-15).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Structural design of precast-prestressed concrete U-beam road bridges based on embodied energy

  • Martí Albiñana, José Vicente|||0000-0002-2435-4095
  • García-Segura, Tatiana|||0000-0002-7059-0566
  • Yepes, V.|||0000-0001-5488-6001
An automated procedure for optimizing the design of precast-prestressed concrete U-beam road bridges is presented. The economic cost and the embodied energy are selected as the objective functions based on production materials, transport and placement. Heuristic optimization is used to search for the best geometry, the concrete type, the prestressing steel, and the reinforcement for the slab and the beam. The results for both objectives provide improved opportunities to learn about low-energy designs. The most influential variables for the energy efficiency goal are analyzed. The relationship between the span length and the embodied energy is described by a good parabolic fit for both optimization criteria. The findings indicate that the objectives do not exhibit conflicting behavior, and also that optimum energy designs are close to the optimum cost designs. The analysis also revealed that a reduction by 1 Euro can save up to 4 kW h. It is recommended to reduce the reinforcement in the slab as well as increase the volume of concrete in both slab and beams in order to achieve higher energy efficiency. It is also worth noting that web inclination angle should be increased when the depth increases for longer span lengths to maintain the optimum slab span lengths in the transverse direction., The authors acknowledge the financial support of the Spanish Ministry of Economy and Competitiveness along with FEDER funding (BRIDLIFE Project: BIA2014-56574-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Appraisal of infrastructure sustainability by graduate students using an active-learning method

  • Pellicer, Eugenio|||0000-0001-9100-0644
  • Yepes, V.|||0000-0001-5488-6001
  • Sierra Varela, Leonardo Andrés
Currently many university programs in the construction field do not take sustainability into account from a holistic viewpoint. This may cause a lack of sensitivity from future professionals concerning sustainability. Academics in construction must endeavor to instill a culture of sustainability in the curricula of their students. Therefore, this study proposes an active-learning method that allows graduate students in the construction field to take into consideration infrastructure sustainability from a variety of perspectives in a participatory process. The students applied an analytical hierarchical process to determine the appraisal degree of each criterion. A cluster statistical analysis was carried out, aiming to identify the profiles that influence decision-making. This method was applied to two classes of graduate students enrolled in the Master of Planning and Management in Civil Engineering at the Universitat Politècnica de València. This method identified a correlation between the profiles toward sustainability and the characteristics of the chosen infrastructure. It was also found that the method fulfills educational purposes: most of the students obtained more than 65% of the target learning outcomes. This approach promotes awareness and sensitivity to different points of view of the sustainability in a participatory context. It can be replicated in other contexts so as to obtain appraisals regarding various criteria that help enhance decision-making., This research was made possible by the support of the Academic Head of the MSc in Planning and Management in Civil Engineering at the Universitat Politecnica de Valencia. The authors are grateful to the students of the sixth and seventh editions of this program for taking part in this educational experiment, as well as to Joaquin Catala, Juan Jose Clemente, Jaime Jimenez and Oscar Roselle, for participating in the focus group. This research was also partially funded by the European Commission under the Erasmus Mundus Lindo 450 Program (grant EMA-2-2012-2658) and the Spanish Ministry of Economy and Competitiveness along with FEDER funding (project BIA2014-56574-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Design optimization of precast-prestressed concrete road bridges with steel fiber-reinforcement by a hybrid evolutionary algorithm

  • Yepes, V.|||0000-0001-5488-6001
  • Martí Albiñana, José Vicente|||0000-0002-2435-4095
  • García-Segura, Tatiana|||0000-0002-7059-0566
[EN] In this paper, the influence of steel fiber-reinforcement when designing precast-prestressed concrete (PPC) road bridges with a double U-shape cross-section is studied through heuristic optimization. A hybrid evolutionary algorithm (EA) combining a genetic algorithm (GA) with variable-depth neighborhood search (VDNS) is formulated to minimize the economic cost and CO2 emissions, while imposing constraints on all the relevant limit states. The case study proposed is a 30-m span-length with a deck width of 12 m. The problem involved 41 discrete design variables. The algorithm requires the initial calibration. Moreover, the heuristic is run nine times so as to obtain statistical information about the minimum, average and deviation of the results. The evolution of the objective function during the optimization procedure is highlighted. Findings show that heuristic optimization is a forthcoming option for the design of real-life prestressed structures. This paper provides useful knowledge that could offer a better understanding of the steel fiber-reinforcement in U-beam road bridges., The authors acknowledge the financial support of the Spanish Ministry of Economy and Competitiveness, along with FEDER funding (BRIDLIFE Project: BIA2014-56574-R) and the Research and Development Support Program of Polytechnic University of Valencia (PAID-02-15).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Study of criteria used to obtain a sustainable bridge

  • Penadés-Plà, Vicent
  • Yepes, V.|||0000-0001-5488-6001
  • García-Segura, Tatiana|||0000-0002-7059-0566
  • Martí Albiñana, José Vicente|||0000-0002-2435-4095
[EN] The sustainable development of bridges is mainly based on meeting the three pillars of sustainability (economic, social and environmental factors) which have different goals. Each main criterion groups a large number of subcritera. Therefore, achieve a sustainable bridge is a complicate problem that involves a high number of factors in each stage of bridge life-cycle. For this reason, decision-making is a helpful process to solve the sustainability problem. The objective of this work is to review the bridge life-cycle decision-making problems that involve criteria that represent the pillars of the sustainability. While some works only consider criteria related to one or two of these pillars, the most current works consider criteria that involve all the pillars of sustainability. Furthermore, most of the works reviewed only study one stage of bridge life-cycle. This study shows the criteria used in some revised journal articles in each bridge life-cycle phase and, the multi-attribute decision-making used to achieve the sustainability. In addition, a small explanation of the obtained information will be carried out., The authors acknowledge the support from the Ministry of Competitiveness and FEDER funding (Project BIA2014-56574-R)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

La competencia transversal de comunicación efectiva en estudios de máster en el ámbito de la ingeniería civil y la construcción

  • Yepes, V.|||0000-0001-5488-6001
  • Martí Albiñana, José Vicente|||0000-0002-2435-4095
[EN] This paper presents the results of a perception study of the M.Sc. degree in concrete engineering and construction management students in relation to the learning outcomes for effective communication crossdisciplinar competence. An anonymous questionnaire using a Likert scale of 12 questions was used. Principal components analysis was used to identify underlying latent variables that explain the pattern of correlations. We have identified three principal components: skills related to oral communication, competence related to the organization and clarity of ideas and expertise related to the use of English. It has also proposed a multiple regression model to explain the variable "communicate clearly and effectively in an oral presentation, using the strategies and appropriate means, depending on the audience and objectives." The results allowed the design based on active learning methods and activities in order to assess this crossdisciplinar competence activities. Changing a written scientific paper into an oral presentation and writing a scientifica paper were the activities. The oral presentation of a scientific paper and writing a scientific article. The group work and the case study were the methodologies used, [ES] La comunicación presenta los resultados de la percepción que realizan alumnos de los másteres de ingeniería del hormigón y de planificación y gestión en la ingeniería civil en relación con los resultados de aprendizaje de la competencia transversal comunicación efectiva. Se ha realizado para ello una encuesta anónima utilizando una escala Likert de 12 preguntas. Se ha elaborado un análisis factorial mediante el método de componentes principales para identificar las variables subyacentes o factores que expliquen la configuración de las correlaciones. Se han reconocido tres componentes principales: competencias relacionadas con la comunicación oral, competencia relacionada con la organización y claridad de las ideas y competencia relacionada con el uso del idioma inglés. Además, se ha propuesto un modelo de regresión múltiple para explicar la variable "comunicarse de forma clara y eficaz en una presentación oral, utilizando las estrategias y los medios adecuados, en función del público y los objetivos". Los resultados han permitido el diseño de actividades basadas en metodologías activas para la evaluación de esta competencia transversal. Se trata de la presentación oral de una comunicación científica y la redacción de un artículo científico. Las metodologías a emplear serán las de trabajo en grupo y el estudio de caso., Los autores agradecen la colaboración de los alumnos del MUIH y del MAPGIC, así como el apoyo recibido por el Ministerio de Ciencia e Innovación (Proyecto de Investigación BIA2014-56574-R) y por la Universitat Politècnica de València (Equipo de Innovación y Calidad Educativa EXCELCON).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Social Sustainability in the Lifecycle of Chilean Public Infrastructure

  • Sierra Varela, Leonardo Andrés
  • Pellicer, Eugenio|||0000-0001-9100-0644
  • Yepes, V.|||0000-0001-5488-6001
To enhance concern for the social aspects of sustainability and to delineate the criteria to be considered at each stage of the lifecycle of an infrastructure, this paper aims to determine the relevance of a set of criteria that evaluate social sustainability throughout the lifecycle of a public civil infrastructure. This research presents the results of a case study applying the Delphi method to 24 Chilean experts consulted in a series of three rounds. In addition, binomial statistical tests and Kendall’s coefficient were used to show the convergence of the experts. Thus, it was identified that of 36 initial criteria assessed at each stage of the lifecycle, the consideration of 20 is required at the design stage, 29 at the construction stage, 33 during operation, and 27 at demolition. The most relevant criteria, per lifecycle stage, were Stakeholder Participation (design and demolition stages), External Local Population (design stage), Internal Human Resources (construction and demolition stages), Macro-Social Action of Socioenvironmental Activities (construction stage), and Macro-Social Action of Socioeconomic Activities (operation stage)., This research was funded by the European Commission under the Erasmus Mundus Lindo Program (EMA-2-2012-2658) and the Spanish Ministry of Economy and Competitiveness along with FEDER funding (Project BIA2014-56574-R). The authors are also very grateful to the participants in the Delphi study and to professors Joaquin Catala, Jaime Jimenez, and Jose V. Marti-Albinana for participating in the focus group.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Pensamiento crítico como competencia transversal en el grado de Ingeniería de Obras Públicas: valoración previa

  • Martí Albiñana, José Vicente|||0000-0002-2435-4095
  • Yepes, V.|||0000-0001-5488-6001
[EN] 10 concepts in terms of crossdisciplinar competences skills were evaluated within the new undergraduate degrees in civil engineering. To do this, different subjects were assigned to these competences. Crossdisciplinar competence skill called "critical thinking" was assigned to the 2nd year subject Typologies and Construction Methods. The present communication presents the results of the students’ perception regarding critical thinking based on the basis for construction types. An anonymous questionnaire using a Likert scale of 8 questions was used. Principal components analysis was used to identify underlying latent variables that explain the pattern of correlations. A multiple regression model was proposed to explain the most important variables. The results allowed the design based on active learning methods and activities in order to assess this crossdisciplinar competence activities. The group work, the oral presentation, the peer review and the approach of exam questions were the methodologies and activities used., [ES] En el marco de las nuevas titulaciones de Grado en Ingeniería de Obras Públicas se establecen 10 conceptos, equivalentes en términos de competencias transversales, para ser evaluados, asignándose para ello distintas asignaturas troncales o de especialidad. La competencia transversal denominada "Pensamiento Crítico" se asigna a la asignatura Tipologías y Procedimientos de las Construcciones que se cursa en 2º curso. La presente comunicación muestra los resultados de la percepción que tienen los alumnos que cursan dicha asignatura respecto al pensamiento crítico basado en los fundamentos de las tipologías constructivas. Se ha realizado para ello una encuesta anónima utilizando para su valoración una escala Likert con 8 preguntas. Se ha realizado un análisis factorial mediante el método de componentes principales para identificar las variables subyacentes o factores que expliquen la configuración de las correlaciones. Se ha propuesto un modelo de regresión múltiple para explicar las variables más importantes. Los resultados han permitido el diseño de actividades basadas en metodologías activas para la evaluación del Pensamiento Crítico. Se plasma en la realización de un trabajo en grupo de profundización de la asignatura, su exposición oral en clase, crítica de los compañeros y planteamiento de preguntas de examen., Los autores agradecen la colaboración de los alumnos de GIOP, así como el apoyo recibido por el Ministerio de Ciencia e Innovación (Proyecto de Investigación BIA2014-56574-R) y por la Universitat Politècnica de València (Equipo de Innovación y Calidad Educativa EXCELCON).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Optimization of high-performance concrete post-tensioned box-girder pedestrian bridges

  • Yepes, V.|||0000-0001-5488-6001
  • García-Segura, Tatiana|||0000-0002-7059-0566
  • Alcalá-González, Julián|||0000-0003-1376-8441
  • Pérez-López, E.
[EN] This paper deals with the economic optimization of high-performance post-tensioned concrete box-girder pedestrian bridges. To this end, a program analyzes and evaluates the structural restrictions following Spanish codes for structural concrete and bridge design loads. This problem includes 33 discrete design variables that define the geometry, the concrete, the reinforcing steel bars and the post-tensioned steel. Various acceptance criteria are proposed to modify a variant of the simulated annealing algorithm with a neighborhood move based on the mutation operator from the genetic algorithms (SAMO). An objective methodology based on the extreme value theory is used to determine the number of experimental tests required to provide a solution with user-defined accuracy as compared to a global optimum solution. Results indicate that the local optima found by SAMO2 fits a three parameter Weibull distribution and improves the cost results for this structural problem. The minimum value obtained by SAMO2 differed just 0.34% compared to the theoretical minimum value so that, from the structural engineering perspective, the divergence was small enough to be accepted. High strength concrete performance was further studied in a concrete strength parametric study to acquire more evidence-based knowledge on its implications for economic efficiency. Finally, the study showed that high-strength concrete decreases the cost by 4.5% and the amount of concrete by 26%., The Spanish Ministry of Economy and Competitiveness along with FEDER funding (Project BIA2014-56574-R and Project BIA2017-85098-R) financially supported this research
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A cognitive approach for the multi-objective optimization of RC structural problems

  • Yepes, V.|||0000-0001-5488-6001
  • García-Segura, Tatiana|||0000-0002-7059-0566
  • Moreno-Jiménez, J.M.
This paper proposes a cognitive approach for analyzing and reducing the Pareto optimal set for multi-objective optimization (MOO) of structural problems by means of jointly incorporating subjective and objective aspects. The approach provides improved knowledge on the decision-making process and makes it possible for the actors involved in the resolution process and its integrated systems to learn from the experience. The methodology consists of four steps: (i) the construction of the Pareto set using MOO models; (ii) the filtering of the Pareto set by compromise programming methods; (iii) the selection of the preferred solutions, utilizing the relative importance of criteria and the Analytic Hierarchy Process (AHP); (iv) the extraction of the relevant knowledge derived from the resolution process. A case study on the reinforced concrete (RC) I-beam has been included to illustrate the methodology. The compromise solutions are obtained through the objectives of economic feasibility, structural safety, and environmental sustainability criteria. The approach further identifies the patterns of behavior and critical points of the resolution process which reflect the relevant knowledge derived from the cognitive perspective. Results indicated that the solutions selected increased the number of years of service life. The procedure produced durable and ecological structures without price trade-offs., The Spanish Ministry of Science and Innovation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Carbon embodied optimization for buttressed earth-retaining walls: Implications for low-carbon conceptual designs

  • Molina Moreno, Francisca
  • Martí Albiñana, José Vicente|||0000-0002-2435-4095
  • Yepes, V.|||0000-0001-5488-6001
[EN] This paper shows the differences between the design of a reinforced concrete structure considering two objectives to minimize; economic cost and CO2 emissions. Both objectives depend on the amount of two high carbon intensive materials: cement in the concrete and steel; therefore, these objectives are related. As the balance between steel and cement per m3 of concrete depends on several factors such as the type of structure, this study focuses on buttressed earth-retaining walls. Another factor that determines the balance between steel and concrete is the height of the wall. Thus, the methodology considers a parametric study for optimal designs of buttressed earth-retaining walls, where one of the parameters is the wall height. One of the objectives is to show the variation in cost when CO2 is minimized, respectful of minimizing the economic cost. The findings show that wall elements under bending-compressive strains (i.e. the stem of the buttressed retaining wall) perform differently depending on the target function. On one hand, the study reveals an upward trend of steel per unit volume of concrete in emission-optimized earth-retaining buttressed walls, compared to the cost-optimized. On the other hand, it is checked that unlike the cost-optimized walls, emission-optimized walls opt for a higher concrete class than the minimum class available. These findings indicate that emission-optimized walls penalize not only concrete volume, but also the cement content, to the extent that a higher concrete class outperforms in reduced emissions. Additionally, the paper outlines how and to what extent the design of this typology varies for the two analyzed objectives in terms of geometry and amount of materials. Some relevant differences influencing the geometry of design strategies are found., This research was funded by the European Institute of Innovation and Technology under grant agreement no 20140262 Low Carbon Strategy in the Construction Industry (PGA_A-PED0094_2014-2.1-278_P066-10) and the Spanish Ministry of Economy and Competitiveness along with FEDER funding (Project BIA2014-56574-R). The authors are grateful for the through revision of the manuscript by Tatiana Garcia-Segura.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A Review of Multi-Criteria Decision-Making Methods Applied to the Sustainable Bridge Design

  • Penadés-Plà, Vicent
  • García-Segura, Tatiana|||0000-0002-7059-0566
  • Martí Albiñana, José Vicente|||0000-0002-2435-4095
  • Yepes, V.|||0000-0001-5488-6001
The construction of bridges has been necessary for societies since ancient times, when the communication between and within towns, cities or communities was established. Until recently, the economic factor has been the only one considered in the decision-making of any type of construction process for bridges. However, nowadays, the objective should not be just the construction of bridges, but of sustainable bridges. Economic, social and environmental factors, which form the three pillars of sustainability, have been recently added. These three factors usually have conflicting perspectives. The decision-making process allows the conversion of a judgment into a rational procedure to reach a compromise solution. The aim of this paper is to review different methods and sustainable criteria used for decision-making at each life-cycle phase of a bridge, from design to recycling or demolition. This paper examines 77 journal articles for which different methods have been used. The most used methods are briefly described. In addition, a statistical study was carried out on the Multiple Attribute Decision-making papers reviewed., The authors acknowledge the financial support of the Spanish Ministry of Economy and Competitiveness, along with FEDER funding (BRIDLIFE Project: BIA2014-56574-R). In addition, the authors wish to thanks the comments of Dan M. Frangopol from Center for Advanced Technology for Large Structural Systems.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A systematic review of application of multi-criteria decision analysis for aging-dam management

  • Zamarrón-Mieza, Iván
  • Yepes, Víctor
  • Moreno-Jiménez, José María
Decisions for aging-dam management requires a transparent process to prevent the dam failure, thus to avoid severe consequences in socio-economic and environmental terms. Multiple criteria analysis arose to model complex problems like this. This paper reviews specific problems, applications and Multi-Criteria Decision Making techniques for dam management. Multi-Attribute Decision Making techniques had a major presence under the single approach, specially the Analytic Hierarchy Process, and its combination with Technique for Order of Preference by Similarity to Ideal Solution was prominent under the hybrid approach; while a high variety of complementary techniques was identified. A growing hybridization and fuzzification are the two most relevant trends observed. The integration of stakeholders within the decision making process and the inclusion of trade-offs and interactions between components within the evaluation model must receive a deeper exploration. Despite the progressive consolidation of Multi-Criteria Decision Making in dam management, further research is required to differentiate between rational and intuitive decision processes. Additionally, the need to address benefits, opportunities, costs and risks related to repair, upgrading or removal measures in aging dams suggests the Analytic Network Process, not yet explored under this approach, as an interesting path worth investigating.