Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Lifetime reliability-based optimization of post-tensioned box-girder bridges

  • García-Segura, Tatiana|||0000-0002-7059-0566
  • Yepes, V.|||0000-0001-5488-6001
  • Frangopol, D.M.
  • Yang, D.Y.
[EN] This paper presents a lifetime reliability-based approach for the optimization of post-tensioned concrete box-girder bridges under corrosion attack. The proposed approach is illustrated by determining the optimal life-cycle cost and CO2 emissions of several initial designs of post-tensioned box-girder bridges with different objectives, i.e. the lowest initial costs, the longest corrosion initiation time, or the maximum safety. The study was conducted in two steps. Firstly, the Pareto set presents initial designs considering the cross-section geometry, the concrete strength, the reinforcing steel and the prestressing steel. Secondly, the maintenance optimization was conducted with the proposed method, aimed at minimizing the economic, environmental and societal impacts of the bridge while satisfying the reliability target during its life-span. Effective maintenance is able to extend the service life of the bridge with the minimum cost and CO2 emissions. It is indicated that a durability-conscious initial design is particularly beneficial for life-cycle performance. Besides, the emphasis on the initial design can also have an effect on the life-cycle performance of bridges. It is found that designs with longer corrosion initiation time are associated with lower life-cycle cost, especially when using concrete of higher strength. Findings from the current paper also indicate that optimal maintenance strategies are more likely to be those with fewer maintenance actions that repair all deteriorating structures simultaneously., The authors acknowledge the financial support of the Spanish Ministry of Economy and Competitiveness, along with FEDER funding (BRIDLIFE Project: BIA2014-56574-R) and the Research and Development Support Program of Universitat Politècnica de València (PAID-02-15).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Multiobjective optimization of post-tensioned concrete box-girder road bridges considering cost, CO2 emissions, and safety

  • García-Segura, Tatiana|||0000-0002-7059-0566
  • Yepes, V.|||0000-0001-5488-6001
This paper presents a multiobjective optimization of post-tensioned concrete road bridges in terms of cost, CO2 emissions, and overall safety factor. A computer tool links the optimization modulus with a set of modules for the finite-element analysis and limit states verification. This is applied for the case study of a three-span continuous post-tensioned box-girder road bridge, located in a coastal region. A multiobjective harmony search is used to automatically search a set of optimum structural solutions regarding the geometry, concrete strength, reinforcing and post-tensioned steel. Diversification strategies are combined with intensification strategies to improve solution quality. Results indicate that cost and CO2 emissions are close to each other for any safety range. A one-euro reduction, involves a 2.34 kg CO2 emissions reduction. Output identifies the best variables to improve safety and the critical limit states. This tool also provides bridge managers with a set of trade-off optimum solutions, which balance their preferences most closely, and meet the requirements previously defined., The authors acknowledge the financial support of the Spanish Ministry of Economy and Competitiveness, along with FEDER funding (BRIDLIFE Project: BIA2014-56574-R) and the Research and Development Support Program of Universitat Politecnica de Valencia (PAID-02-15).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Estimation of the light field inside photosynthetic microorganism cultures through Mittag-Leffler functions at depleted light conditions

  • Fuente-Herraiz, David|||0000-0003-4141-7948
  • Urchueguía Schölzel, Javier Fermín|||0000-0002-3054-3431
  • Conejero, J. Alberto|||0000-0003-3681-7533
  • Lizama, Carlos
[EN] Light attenuation within suspensions of photosynthetic microorganisms has been widely described by the Lambert-Beer equation. However, at depths where most of the light has been absorbed by the cells, light decay deviates from the exponential behaviour and shows a lower attenuation than the corresponding from the purely exponential fall. This discrepancy can be modelled through the Mittag-Leffler function, extending Lambert-Beer law via a tuning parameter ¿ that takes into account the attenuation process. In this work, we describe a fractional Lambert-Beer law to estimate light attenuation within cultures of model organism Synechocystis sp. PCC 6803. Indeed, we benchmark the measured light field inside cultures of two different Synechocystis strains, namely the wild-type and the antenna mutant strain called Olive at five different cell densities, with our in silico results. The Mittag-Leffler hyper-parameter ¿ that best fits the data is 0.995, close to the exponential case. One of the most striking results to emerge from this work is that unlike prior literature on the subject, this one provides experimental evidence on the validity of fractional calculus for determining the light field. We show that by applying the fractional Lambert-Beer law for describing light attenuation, we are able to properly model light decay in photosynthetic microorganisms suspensions., This project has received funding from the European Unions Seventh Programme for Research, technological development and demonstration under grant agreement No 308518 CyanoFactory. David Fuente is supported by grant Contratos Predoctorales FPI 2013 of the Universitat Politecnica de Valencia. Carlos Lizama is supported by Programa de Apoyo a la Investigation y Desarrollo (PAID-02-15) de la Universitat Politecnica de Valencia and CONICYT - PIA - Anillo ACT1416
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Computer-support tool to optimize bridges automatically

  • García-Segura, Tatiana|||0000-0002-7059-0566
  • Yepes, V.|||0000-0001-5488-6001
  • Alcalá-González, Julián|||0000-0003-1376-8441
[EN] In bridge design, many variables like material grades, cross-sectional dimensions, passive and prestressing steel need to be modeled to evaluate structural performance. Efficiency gains are intended while satisfying the serviceability and ultimate limit states imposed by the structural code. In this paper, a computer-support tool is presented to analyze continuous post-tensioned concrete (PSC) box-girder road bridges, to minimize the cost as well as to provide optimum design variables. The program encompasses six modules to perform the optimization process, the finite-element analysis, and the limit states verification. The methodology is defined and applied to a case study. A harmony search (HS) algorithm optimizes 33 variables that define a three-span PSC box-girder bridge located in a coastal region. However, the same procedure could be implemented to optimize any structure. This tool enables one to define the fixed parameters and the variables that are optimized by the heuristic algorithm. Moreover, the output provides useful rules to guide engineers in designing PSC box-girder road bridges., The authors acknowledge the financial support of the Spanish Ministry of Economy and Competitiveness, along with FEDER funding (BRIDLIFE Project: BIA2014-56574-R) and the Research and Development Support Program of Universitat Politècnica de València (PAID-02-15).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Design optimization of precast-prestressed concrete road bridges with steel fiber-reinforcement by a hybrid evolutionary algorithm

  • Yepes, V.|||0000-0001-5488-6001
  • Martí Albiñana, José Vicente|||0000-0002-2435-4095
  • García-Segura, Tatiana|||0000-0002-7059-0566
[EN] In this paper, the influence of steel fiber-reinforcement when designing precast-prestressed concrete (PPC) road bridges with a double U-shape cross-section is studied through heuristic optimization. A hybrid evolutionary algorithm (EA) combining a genetic algorithm (GA) with variable-depth neighborhood search (VDNS) is formulated to minimize the economic cost and CO2 emissions, while imposing constraints on all the relevant limit states. The case study proposed is a 30-m span-length with a deck width of 12 m. The problem involved 41 discrete design variables. The algorithm requires the initial calibration. Moreover, the heuristic is run nine times so as to obtain statistical information about the minimum, average and deviation of the results. The evolution of the objective function during the optimization procedure is highlighted. Findings show that heuristic optimization is a forthcoming option for the design of real-life prestressed structures. This paper provides useful knowledge that could offer a better understanding of the steel fiber-reinforcement in U-beam road bridges., The authors acknowledge the financial support of the Spanish Ministry of Economy and Competitiveness, along with FEDER funding (BRIDLIFE Project: BIA2014-56574-R) and the Research and Development Support Program of Polytechnic University of Valencia (PAID-02-15).