Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Local piezoelectric behavior of potassium sodium niobate prepared by a facile synthesis via water soluble precursors

  • Senes, Nina
  • Iacomini, Antonio
  • Domingo, Neus
  • Enzo, Stefano
  • Mulas, Gabriele
  • Cuesta-López, Santiago
  • Garroni, Sebastiano
Due to the ever‐increasing restrictions connected to the use of toxic lead‐based materials, the developing of lead‐free piezoceramics has become one of the most urgent tasks. In this context, potassium sodium niobate materials (KNN) have attracted a lot of interest as promising candidates due to their excellent piezo properties. For this reason, many efforts have been addressed to optimize the synthesis process now suffering by several drawbacks including the high volatilization of potassium and sodium at the conventional high temperature treatments and the use of expensive metal precursors. To overcome these issues, a new modified Pechini method to synthesize single phase K0.5Na0.5NbO3 powders, from water soluble metal precursors, is presented. Microstructural and structural parameters are characterized by X‐ray diffraction (XRD). Depending on the amount of citric acid added to the starting reagents, two pure single‐phase K0.5Na0.5NbO3 (2 g citric acid) and K0.3Na0.7NbO3 (0.2 g citric acid), respectively, are obtained with a good crystallinity at a moderate temperature of 500 °C. The piezo responses of the as calcined systems are tested by piezoresponse force microscopy (PFM). K0.5Na0.5NbO3 exhibits a much higher response with respect to the other phase, which relates to the larger crystallinity and to the chemical composition., This work has been partially funded by the H2020‐MSCA‐IF‐2015 grant number #707954. The activity of N. Senes is supported by a PhD program in a collaborative scheme between the University of Sassari and Cagliari of Italy, which is especially endorsed by Autonomous Regional Administration of Sardinia (RAS). The authors acknowledge the support of the “Servizi di Ateneo per la Ricerca (CeSAR)” of the Sassari University where preliminary XRD experiments, using the Rigaku Smart Lab rotating anode diffractometer, and SEM analyses, were conducted. Financial support was obtained under project from the Spanish Ministerio de Economía y Competitividad (MINECO) under project FIS2015‐73932‐JIN. ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant No. SEV‐2013‐0295)., Peer reviewed
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Artículo científico (JournalArticle)

Mechanically activated metathesis reaction in NaNH2–MgH2 powder mixtures

  • Garroni, Sebastiano
  • Delogu, Francesco
  • Minella, Christian Bonatto .
  • Pistidda, Claudio .
  • Cuesta López, Santiago
The present work addresses the kinetics of chemical transformations activated by the mechanical processing of powder by ball milling. In particular, attention focuses on the reaction between NaNH2 and MgH2, specific case studies suitably chosen to throw light on the kinetic features emerging in connection with the exchange of anionic ligands induced by mechanical activation. Experimental findings indicate that the mechanical treatment of NaNH2–MgH2 powder mixtures induces a simple metathetic reaction with formation of NaH and Mg(NH2)2 phases. Chemical conversion data obtained by X-ray diffraction analysis have been interpreted using a kinetic model incorporating the statistical character of the mechanical processing by ball milling. The apparent rate constant measuring the reaction rate is related to the volume of powder effectively processed during individual collisions, and tentatively connected with the transfer of mechanical energy across the network formed by the points of contact between the powder particles trapped during collisions., H2020-MSCA-IF-2015 Grant Number #707954
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Artículo científico (JournalArticle)

Advanced Synthesis on Lead‐Free KxNa(1−x)NbO3 Piezoceramics for Medical Imaging Applications

  • Garroni, Sebastiano
  • Senes, Nina .
  • Iacomini, Antonio .
  • Enzo, Stefano
  • Mulas, Gabriele
  • Pardo, Lorena .
  • Cuesta López, Santiago
Ultrasonic imaging system is a non‐invasive medical imaging technique that has become one of the most widely used diagnostic tools in modern medicine for detecting prenatal anomalies and deep screening of biological tissues. One of the core components of the ultrasound system is represented by the probe where is located the transducer which produces mechanical energy in response to electrical signals, and conversely, produce electrical signals in response to mechanical stimulus. The ultrasound transducer in the probe is generally made of a piezoelectric ceramic material such as lead zirconate titanate (PZT), which present two important limitations as the presence of toxic material as the lead, and low acoustic impedance ascribable to its high density. For these reasons, it is necessary to focus the research on new eco‐friendly piezoelectric materials with properties comparable with PZT. Among them potassium sodium niobate is considered as a leading lead‐free candidate to replace lead‐based piezoceramics, resulting the most promising. In this review, the most relevant and advanced synthesis approaches and the unique properties of this class of lead‐free piezoceramics are presented in detail., H2020-MSCA-IF-2015 grant number#707954
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Local Piezoelectric Behavior of Potassium Sodium Niobate Prepared by a Facile Synthesis via Water Soluble Precursors

  • Senes, Nina|||0000-0003-1644-2092
  • Iacomini, Antonio|||0000-0002-6580-8129
  • Domingo Marimon, Neus|||0000-0002-5229-6638
  • Enzo, Stefano|||0000-0002-3628-5269
  • Mulas, Gabriele|||0000-0003-2285-3955
  • Cuesta-Lopez, Santiago|||0000-0002-7401-3889
  • Garroni, Sebastiano|||0000-0001-7686-6589
Due to the ever-increasing restrictions connected to the use of toxic lead-based materials, the developing of lead-free piezoceramics has become one of the most urgent tasks. In this context, potassium sodium niobate materials (KNN) have attracted a lot of interest as promising candidates due to their excellent piezo properties. For this reason, many efforts have been addressed to optimize the synthesis process now suffering by several drawbacks including the high volatilization of potassium and sodium at the conventional high temperature treatments and the use of expensive metal precursors. To overcome these issues, a new modified Pechini method to synthesize single phase KNaNbO powders, from water soluble metal precursors, is presented. Microstructural and structural parameters are characterized by X-ray diffraction (XRD). Depending on the amount of citric acid added to the starting reagents, two pure single-phase KNaNbO (2 g citric acid) and KNaNbO (0.2 g citric acid), respectively, are obtained with a good crystallinity at a moderate temperature of 500 °C. The piezo responses of the as calcined systems are tested by piezoresponse force microscopy (PFM). KNaNbO exhibits a much higher response with respect to the other phase, which relates to the larger crystallinity and to the chemical composition.