Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Pd-Enhanced Carbon-Encapsulated Co Nanoparticles for Efficient Reverse Water Gas Shift under Magnetic Induction Heating

  • García-Zaragoza, Adrián
  • Río-Rodríguez, José Luis del
  • Cerezo-Navarrete, Christian
  • Molina, Maria Asuncion
  • Costley-Wood, Lucy
  • Mazarío-Santa-Pau, Jaime
  • Chaudret, Bruno
  • Martínez-Prieto, Luis Miguel
  • Beale, Andrew M
  • Gutiérrez-Tarriño, Silvia
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] Reducing CO2 to CO via the reverse water¿gas shift (RWGS) reaction is a promising strategy for carbon capture and utilization (CCU). In this study, tailored magnetic catalysts were designed through the pyrolysis of a Co-based MOF to form well-defined nanoparticles. As a result, carbon-encapsulated cobalt nanoparticles (Co@C) and palladium-doped cobalt nanoparticles (CoPd/Co@C) were synthesized and thoroughly characterized using a variety of techniques, including in situ X-ray absorption and diffraction experiments. These carbon-based catalysts were simultaneously used as heating agents and catalysts for the magnetically induced RWGS reaction, exhibiting remarkable activity and selectivity for syngas production. CO2 conversions of 61.1% and 71.1% were obtained for Co@C and CoPd/Co@C (63 mT, 2 kW, 320 kHz), respectively. Using magnetic induction heating (MIH), these catalysts operate at lower local temperatures and with greater energy efficiency than conventional thermal heating, while achieving superior CO production efficiency. Notably, CoPd/Co@C achieved highly satisfactory CO production efficiency (478.5 mLCO/kW·h), demonstrating a significant improvement compared to the analogous process utilizing magnetically induced heating. Furthermore, CoPd/Co@C exhibited unwavering stability, maintaining its performance for more than 200 h without significant degradation or need for reactivation. This study highlights the potential of MIH for industrial applications in CO2 reduction, offering a more renewable and economically viable alternative to traditional methods., The authors thank the financial support from the European Union's Horizon 2020 research and innovation program under grant agreement No 101022507. Financial support by Severo Ochoa centre of excellence program (CEX2021-001230-S) is gratefully acknowledged. In addition, this work has received funding from the Spanish Government (PID2022-140111OB-I00, PID2021-126080OA-I00, TED2021-130191B-C41, TED2021-132087A-I00 and CNS2023-145078 funded by MCIN/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR), Generalitat Valenciana (CIPROM/2022/10), and Junta de Andalucia (ProyExcel_00706). This study forms part of the Advanced Materials program and was supported by MCIN with partial funding from European Union Next Generation EU (PRTR-C17. I1) and by Generalitat Valenciana (MFA/2022/047). J.L.R.-R. thanks to the MCIU for his FPU PhD contract FPU21/02562. S.G.T. thanks the Unversitat Politecnica de Valencia for her postdoctoral contract PAID-10-23. J.M. acknowledges his MSCA individual postdoctoral fellowship from the Horizon Europe research and innovation program (Project 101109254-BIOCATMAG) for funding. The authors thank Instituto de Tecnologia Quimica (ITQ), Consejo Superior de Investigaciones Cientificas (CSIC) and Universitat Politecnica de Valencia (UPV) for the facilities. We also thank the UPV Electron Microscopy Service for the TEM analysis and Magnetic Measurements Service of LPCNO. The authors would also like to thank ALBA synchrotron for provision of beamtime 2023097780 on NOTOS beamline, and beamline scientist Eduardo Villalobos. Also, Diamond Light Source for measurements via Block Allocation Group Access on B18 during beamtime SP34632-4. The UK Catalysis Hub is kindly thanked for resources and support provided during these B18 measurements, via UCL's membership of the UK Catalysis Hub Consortium funded by EPSRC grant EP/R026939/1.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Electrochemically generated metal-doped 2D-cobalt(M)MOFs@C derivatives for boosting the electrocatalytic oxidation of glycerol to formate

  • Hernandez-Salvador, Sergio
  • Montiel, Miguel A.
  • Molina, M. Asuncion
  • Calvente, Juan Jose
  • Beale, Andrew M.
  • Solla-Gullon, Jose
  • Olloqui-Sariego, Jose Luis
  • Río-Rodríguez, José Luis del
  • Gutiérrez-Tarriño, Silvia
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] Glycerol is an underutilized waste product that is abundantly available from the biodiesel industry. Electrocatalytic oxidation of glycerol (GOR) to formate offers an environmentally friendly and cost-effective approach to valorizing glycerol. In this study, we have developed new types of metal-doped cobalt metal-organic frameworks, which are grown directly on a carbon matrix via a one-pot synthesis as electrocatalyst precursors. In-depth structural analysis has revealed that, in the Ni-doped cobalt MOF, Ni substitutes a fraction of Co sites isomorphically, forming isolated Ni(II) centers, while Cu is present as a mixture of Cu(II) and metallic Cu, with the majority in the oxidized form as highly dispersed species and a small fraction forming nanoparticles. These materials were then subjected to a controlled potential-induced surface reconstruction to produce mixed-metal oxide/oxyhydroxide-like environments interconnected through M-O-M motifs, the extent of the reconstruction depending strongly on the dopant metal. The metal-doped derivatives were tested as electrocatalysts for the alkaline electrooxidation of glycerol using in-house designed electrochemical reactors with different cell configurations and operating modes. We demonstrated that metal-doped derivative phases exhibit improved electrocatalytic activity for GOR compared to the monometallic counterpart. These catalysts yield significant glycerol conversion rates under single-pass operation, with improved Faradaic efficiencies towards formate (up to 70%) and low energy consumption (< 320 kWh kmol(- 1)), while suppressing the complete oxidation of glycerol to carbonate or CO2. This work provides new insight into the rational design of metal-doped MOF derivatives as highly active and selective electrocatalysts for the practical glycerol valorization., The authors thank the financial support from the Spanish Govern-ment (PID2021-126799NB-I00, PID2022-140111OB-I00, PID2022-13 8491OB-C32, TED2021-130191B-C41, TED2021-130191B-C42 and RED2022-134120-T funded by MCIU/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR) . This study forms part of the Advanced Materials program and was supported by MCIN with partial funding from the European Union Next Generation EU (PRTR-C17. I1) , by Generalitat Valenciana (MFA/2022/047, CIPROM/2022/10) . In addition, this work has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 101022507. This work was also funded by "Ayuda a Primeros Proyectos de Investigacion (PAID-06-24) . J.L.R.-R. thanks the MCIU for his FPU PhD contract FPU21/02562. S.G.T. thanks the Uni-versitat Politecnica de Valencia for her postdoctoral contract PAID-10-23. M.A.M. acknowledges funding from the EPSRC InFUSE Prosperity Partnership (EP/V038044/1) . The authors acknowledge ALBA Syn-chrotron for access to the NOTOS beamline under Proposal 2023097780 and Diamond Light Source for access to Beamline B18 under Proposal SP45829-1. The authors also thank Eduardo Villalobos, Carlo Marini and the B18 beamline staff for their assistance during the XAS mea-surements. The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization. Financial support by Severo Ochoa Centre of Excellence program (CEX2021-001230-S) is gratefully acknowledged. Authors are also grateful to Ana Cristina Martinez Cantos (Institute of Electrochemistry, University of Alicante) for her work in the identification and determination of products in the glycerol electro-oxidation process.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Green One-Pot Synthesis of Benzimidazoles from Dinitroarenes in Water Using a Ru-Doped Co-Based Heterogeneous Catalyst

  • del Río-Rodríguez, Jose Luis
  • Molina, Maria Asunción
  • Costley-Wood, Lucy
  • Falcini, Chiara
  • Beale, Andrew M.
  • Gutiérrez-Tarriño, Silvia
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] A novel methodology is presented for preparing non-noble metal-based heterogeneous catalysts doped with low amounts of noble metals, yielding highly active and reusable materials for sustainable organic transformations. A new Co-Ru@C catalyst was developed by incorporating small ruthenium nanoparticles (1 wt %) and cobalt nanoparticles (10 wt %) on Vulcan carbon via pyrolysis of a ruthenium-doped cobalt metal-organic framework supported on carbon (2D-Co(Ru)MOF/C). Advanced characterization (in situ PXRD and XAS, HAADF-STEM, HRTEM) confirmed strong Co-Ru interactions, enhancing catalytic activity. The catalyst was evaluated in the one-pot reductive amination of dinitrobenzenes to benzimidazoles using molecular hydrogen and water, which is in line with green chemistry. The synergistic effect between Co and Ru enabled quantitative product yields under significantly milder reaction conditions than the existing ones. In addition, ruthenium was found to facilitate hydrogen activation in the bimetallic material compared with its undoped Co@C counterpart. Regarding stability, the Co-Ru@C catalyst retained its activity over at least five consecutive cycles without metal leaching or structural degradation. This material demonstrated a broad substrate scope, affording over 20 functionalized benzimidazoles in high yields. Half-gram-scale syntheses of commercial Diabazole and Fuberidazole further validated the scalability of this approach., Financial support from the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) is gratefully acknowledged. The authors thank the financial support provided by the grants (PID2022140111OB-I00, TED2021-130191B-C41 funded by MCIN/AEI/10.13039/501100011033 and ERDF A way for making Europe and European Union NextGenerationEU/PRTR). This project has also received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No. 101022507 and NextGenerationEU/PRTR. This study forms part of the Advanced Materials program and was supported by MCIN with partial funding from European Union Next Generation EU (PRTR-C17.I1) and by Generalitat Valenciana (MFA/2022/047). This work was also funded by "Ayuda a Primeros Proyectos de Investigacion (PAID-06-24)", Vicerectorate of Research of the Universitat Politecnica de Valencia (UPV). S.G.T. thanks the Universitat Politecnica de Valencia for her postdoctoral contract PAID-10-23. J.L.R.-R. thanks the MCIU for his FPU PhD contract FPU21/02562. XAS and XRD experiments were performed at NOTOS beamline at ALBA Synchrotron (proposal number 2023097780) with the collaboration of ALBA staff (Eduardo Villalobos and Carlo Marini). The authors thank Diamond Light Source, particularly B18 beamline team and D. Gianolio for their support during XAS measurement (proposal SP42561-1). The electron microscopy service of the UPV is acknowledged for their help in sample characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Selective design of MOF-derived electrocatalytic interphases by potential-driven surface reconstruction

  • Hernández-Salvador, S
  • Márquez, Inmaculada
  • Calvente, Juan José
  • Río-Rodríguez, José Luis del
  • Andreu, Rafael
  • Olloqui Sariego, José Luis
  • Gutiérrez-Tarriño, Silvia
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] Metal-organic frameworks (MOFs) can be used as precursors for the directed synthesis of derived materials with enhanced performance for electrocatalysis. Herein, we report on an in-situ electrochemical strategy for the selective synthesis of hybrid electrocatalysts using a cobalt MOF (2D-CoMOF) as a precursor for constructing electrochemical sensors to monitor the glucose oxidation reaction (GOR). By using in-situ Raman spectroelectrochemistry, it is demonstrated that a precise control of the applied potential during amperometric treatment of 2D-CoMOF can promote the generation of derived heterostructures in which the original MOF coexists with metal oxides and/or oxyhydroxides (MOF-MOx) with different compositions. The so-prepared electrodes exhibit high electroactive surface areas, a high number of electrocatalytically active cobalt sites and an efficient charge transport across the catalytic film. Moreover, their composition-dependent electrocatalytic performance for the glucose oxidation reaction is examined, establishing a relationship between the applied potential, the macroscopic chemical composition of the heterostructure and the electrocatalytic performance for glucose sensing. In particular, the hybrid phases consisting of Co-MOF/Co3O4/CoOOH display superior electrocatalytic sensing performance with a wide linear concentration range and high sensitivity. The present work emphasizes the significance that the precise control of the applied potential has on the electrochemically-assisted MOF transformation for developing highly efficient MOF-derived electrocatalysts., Authors thank the financial support by the grants PID2021-126799NB-I00 and PID2022-140111OB-I00 funded by MICIU/AEI/ 10.13039/501100011033 and by ERDF/EU, TED2021-130191B-C41, TED2021-130191B-C42 and RED2022-134120-T funded by MICIU/AEI/ 10.13039/501100011033 and ERDF A way for making Europe, and European Union Next Generation EU/PRTR. Authors acknowledge funding from Junta de Andalucía (P20 01027 and PYC 20 RE 060 UAL. Financial support by Severo Ochoa centre of excellence program (CEX2021-001230-S) is gratefully acknowledged. This study forms part of the Advanced Materials program and was supported by MCIN with partial funding from European Union Next Generation EU (PRTR-C17. I1) and by Generalitat Valenciana (MFA/2022/047). S.G.T. thanks the Universitat Politecnica de Valencia for her postdoctoral contract PAID10-23. J.L.R.-R. thanks the MCIU for his FPU PhD contract FPU21/02562.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Controlled formation of CoOOH/Co(III)-MOF active phase for boosting electrocatalytic alkaline water oxidation

  • Márquez, Inmaculada
  • Portorreal-Bottier, Arismendy
  • Río-Rodríguez, José Luis del
  • Hernández-Salvador, S.
  • Calvente, Juan José
  • Olloqui Sariego, José Luis
  • Gutiérrez-Tarriño, Silvia
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] Surface reconstituted metal-organic frameworks (MOFs) offer appealing properties for electrocatalysis due to their unique structural and compositional advantages. In this work, a controlled potential-induced reconstruction of a two-dimensional cobalt metal-organic framework for boosting oxygen evolution reaction in alkaline media is reported. The current MOF is shown to undergo a partial structural transformation that generates a heterogeneous system, where the original MOF coexists with an oxyhydroxide phase. In fact, the potential-induced stabilization of Co(III) metal centers in the MOF is crucial for delaying its full degradation in alkaline media. This partial retention of the Co(III)MOF phase in the so-derived heterogeneous catalyst has been demonstrated to be decisive for boosting the alkaline electrocatalytic oxygen evolution reaction (OER), displaying superior OER activity in terms of both thermodynamic and kinetic merits compared to the benchmark IrO(2 )and RuO2 electrocatalysts and the prototypical cobalt (oxy)hydroxides, with a Tafel slope of 52 mV dec(- 1) and a turnover frequency (TOF) of 6.8 s(- 1) at 450 mV. Remarkably, the generated final product is stable, exhibiting high robustness and long durability for long-term OER electrolysis. This work provides new insight into the impact of the reconstruction of a MOF for alkaline OER under typical electrochemical conditions, which ultimately benefits the rational design of MOF-based catalysts with high electrocatalytic activity for oxidation reactions., Financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) is gratefully acknowledged. Authors thank the financial support by the grants (PID2021-126799NB-I00, PID2022-140111OB-I00, TED2021-130191B-C41, TED2021-130191B-C42 funded by MCIN/AEI/10.13039/501100011033 and ERDF A way for making Europe, and European Union NextGenerationEU/PRTR) . Authors acknowledge funding from Junta de Andalucia (P20 01027 and PYC 20 RE 060 UAL) . J.L.R.-R. thanks the MCIU for his FPU PhD contract FPU21/02562.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The Second Life of Cobalt MOF: Alternating Magnetic Field- Assisted Electrocatalytic Oxygen Evolution Reaction in MOF-derived Nanoparticles

  • del Río-Rodríguez, Jose Luis
  • Márquez, Inmaculada
  • Gallo-Cordova, Álvaro
  • Molina, M. Asunción
  • Martínez, Jordan Santiago
  • Calvente, Juan José
  • Beale, Andrew M.
  • Morales, Maria del Puerto
  • Olloqui Sariego, José Luis
  • Gutiérrez-Tarriño, Silvia
  • Cerezo-Navarrete, Christian
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] A major challenge in hydrogen production from water electrolysis is the slow kinetics of oxygen evolution (OER). Applying an alternating magnetic field (AMF) to ferromagnetic metal nanoparticles on electrodes has gained attention due to the generation of a thermally activated electrocatalyst, which can boost OER performance. This work studies the influence of external parameters and intrinsic characteristics of carbon-encapsulated cobalt MOF-derived nanoparticles deposited onto graphite paper electrodes on the electrocatalytic AMF-OER coupled process. Specifically, the impact of AMF strength, the electrolyte composition (concentration and cation nature) and cobalt content on the electrocatalytic AMF-OER performance are thoroughly investigated. Results reveal that AMF significantly boosts OER activity of Co@C-based electrodes, their enhancement being strongly dependent on the electrolyte composition. Furthermore, both the heating capacity of the herein synthesized catalyst for magnetic hyperthermia and their structural features remain intact after an intense and prolonged electrocatalytic AMF-OER experiment. No signs of sintering, leaching, or particle size increase, which are typical issues observed when metal nanoparticles are subjected to an intense external magnetic field, have been found. This underscores the high operational stability of this catalyst. These findings provide new insights into thermal AMF-assisted alkaline water oxidation for developing high-performance catalysts for enhanced electrocatalysis., Financial support by Severo Ochoa Centre of Excellence program (CEX2021-001230-S) is gratefully acknowledged. The authors thank the financial support from the Spanish Government (PID2021-126799NB-I00, PID2022-140111OB-I00, TED2021-130191B-C41, TED2021-130191B-C42, TED2021-130191B-C43 and RED2022-134120-T funded by MCIU/AEI/ 10.13039/501100011033 and European Union NextGenerationEU/PRTR). This study forms part of the Advanced Materials program and was supported by MCIN with partial funding from the European Union Next Generation EU (PRTR-C17. I1) and by Generalitat Valenciana (MFA/2022/047) and Generalitat Valenciana (CIPROM/2022/10). In addition, this work has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 101022507. This work was also funded by "Ayuda a Primeros Proyectos de Investigacion (PAID-06-24)." J.L.R.-R. thanks the MCIU for his FPU PhD contract FPU21/02562. SGT thanks the Universitat Politecnica de Valencia for her postdoctoral contract PAID-10-23. The authors thank Diamond Light Source, particularly the B18 beamline team and D. Gianolio, for their support during the XAS measurements (proposal SP40577-1). M.A.M. acknowledges Laurelin project (European Union's Horizon 2020 - Reference: 101022507) for PDRA contract at UCL.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Multifunctional Heterogeneous Cobalt Catalyst for the One-Pot Synthesis of Benzimidazoles by Reductive Coupling of Dinitroarenes with Aldehydes in Water

  • Río-Rodríguez, José Luis del
  • Chinchilla, Lidia E.
  • Holgado, J.P.
  • Villar-García, Ignacio
  • Pérez Dieste, Virginia
  • Calvino, José Juan
  • Gutiérrez-Tarriño, Silvia
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] The endeavor of sustainable chemistry has led to significant advancements in green methodologies aimed at minimizing environmental impact while maximizing efficiency. Herein, a straightforward synthesis of benzimidazoles by reductive coupling of o-dinitroarenes with aldehydes is reported for the first time in aqueous media while using a non-noble metal catalyst. This work demonstrates that the combination of nitrogen and phosphorous ligands in the synthesis of supported heteroatomincorporated Co nanoparticles is crucial for obtaining the desired benzimidazoles. The process achieves >99% conversion, >99% chemoselectivity and stability for the reduction of dinitroarenes using water as the solvent and hydrogen as the reductant under mild reaction conditions. The robustness of the catalyst has been investigated using several advanced techniques such as HRTEM, HAADF-STEM, XEDS, EELS, and NAP-XPS. In fact, we have shown that the introduction of N and P dopants prevents metal leaching and the sintering of the cobalt nanoparticles. Finally, to explore the general catalytic performance, a wide range of substituted dinitroarenes and benzaldehydes were evaluated, yielding benzimidazoles with competitive and scalable results, including MBIB (94% yield), which is a compound of pharmaceutical interest., Financial support by Severo Ochoa centre of excellence program (CEX2021-001230-S) is gratefully acknowledged. The authors thank the financial support from the Spanish Government (PID2022-140111OB-I00, PID2020-113006-RB-I00, TED2021-130191B-C41 and TED2021-130191B-C44, PID2020-119946RB-I00, funded by MCIN/AEI/ 10.13039/501100011033 and European Union NextGenerationEU/PRTR). This study forms part of the Advanced Materials programme and was supported by MCIN with partial funding from European Union Next Generation EU (PRTR-C17. I1) and by Generalitat Valenciana (MFA/2022/047). In addition, this work has received funding from the European Union s Horizon 2020 research and innovation program under grant agreement No 101022507. J.L.R.-R. thanks the MCIU for his FPU PhD contract FPU21/02562. SGT thanks the Universitat Politècnica de València for her postdoctoral contract PAID-10-23. IJVG would like to acknowledge OSMIBatt - CNS2022-135285 for funding. HR-STEM studies were performed at the DME-UCA node of the ELECMI Spanish Unique Infrastructure (ICTS) for Electron Microscopy of Materials. Some of these experiments were performed at CIRCE (beamtime 2022096991) beamline at ALBA Synchrotron with the collaboration of ALBA staff.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Sustainable One-Pot Synthesis of N-Substituted Pyrroles Using a Multifunctional Cobalt-Based Catalyst

  • del Río-Rodríguez, Jose Luis
  • Tiscareño-Ferrer, Arisbeth
  • Gutiérrez-Tarriño, Silvia
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] The development of novel non-noble metal-based heterogeneous catalysts for organic compound synthesis has gained significant relevance in the last decades, aiming to maximize efficiency while minimizing environmental impact. A carbon-supported nitrogen phosphorus-cobalt catalyst (Co2PNx@NC) was found to be active for the one-pot synthesis of N-substituted pyrroles via the reductive coupling of nitrobenzene with 2,5-hexanedione. This work represents the first successful synthesis of this important group of molecules with >99% conversion and >99% chemoselectivity, using ethanol as a green solvent, non-noble metal-based catalyst, H-2 as the reductant, and mild reaction conditions simultaneously. The robustness of the catalyst has been investigated using several techniques, including HAADF-STEM, HRTEM, XEDS, and PXRD, revealing excellent stability after six successive runs. In the presence of this material, the hydrogenation of readily accessible nitroarenes followed by condensation yields more than 25 pyrroles in good to high yields. Beyond its advantageous step economy, the broad synthetic applicability of this methodology was demonstrated across a range of functionalized substrates, including the preparation of antifungal and antimycobacterial agents on a half-gram scale. A sustainability assessment of the process using Green Metrics, EcoScale, and GreenStar tools confirmed the effectiveness of ethanol as a green solvent for this process., Financial support by Severo Ochoa Centre of excellence program (CEX2021-001230-S) is gratefully acknowledged. The authors thank the financial support from the Spanish Government (PID2022-140111OB-I00 and TED2021-130191B-C41, funded by MCIN/AEI/ 10.13039/501100011033 and European Union NextGenerationEU/PRTR). This study forms part of the Advanced Materials program and was supported by MCIN with partial funding from European Union Next Generation EU (PRTR-C17. I1) and by Generalitat Valenciana (MFA/2022/047). In addition, this work has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 101022507. This work was also funded by "Ayuda a Primeros Proyectos de Investigacion (PAID-06-24)", Vicerectorate of Research of the Universitat Politecnica de Valencia (UPV). Jose Luis del Rio-Rodriguez thanks the MCIU for his FPU PhD contract FPU21/02562. Silvia Gutierrez-Tarrino thanks the Universitat Politecnica de Valencia for her postdoctoral contract PAID-10-23.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Magnetic induction synthesis of Ru-decorated encapsulated Co@C nanoparticles for aqueous nitroarene reductions

  • Río-Rodríguez, José Luis del
  • Suarez-Riano, Oscar
  • Gutiérrez-Tarriño, Silvia
  • Chaudret, Bruno
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] Controlling the spatial organization of metallic components in bimetallic nanocatalysts remains a major challenge in catalyst design, particularly when conventional methods offer limited control over metal distribution at the catalyst surface. Here, we report two strategies for incorporating Ru into carbon-encapsulated cobalt nanoparticles (Co@C): conventional thermal treatment (RuCo@C-TH) and magnetic induction heating (RuCo@C-IH). Although both methods introduce Ru into the carbon matrix, they generate markedly different nanoscale organizations. Catalyst characterization shows that induction heating promotes a much closer spatial association between Ru and the original Co@C nanoparticles, consistent with localized heating of the magnetic cores under an alternating magnetic field and in situ decomposition of the Ru precursor in their vicinity. The catalytic consequences of this structural difference were evaluated through a series of aqueous hydrogenation and reductive amination reactions under H2, including nitrobenzene hydrogenation, tandem pyrrole synthesis, benzimidazole formation, and the chemoselective partial reduction of dinitrobenzene to nitroaniline. In all cases, Ru incorporation improves the catalytic behaviour relative to Co@C, enabling these transformations to proceed efficiently in water under mild conditions. However, the magnitude of this effect strongly depends on the synthetic route: whereas the thermally prepared catalyst only shows moderate improvements, the material obtained by magnetic induction consistently delivers much higher conversion and, when relevant, markedly improved selectivity. These results show that magnetic induction heating is not merely an alternative synthetic method, but an effective strategy to control Co-Ru proximity and generate superior bimetallic catalysts for sustainable aqueous-phase transformations., The authors thank the financial support from the Spanish Government (PID2022-140111OB-I00 and TED2021-130191B-C41 funded by MCIU/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR). This study forms part of the Advanced Materials program and was supported by MCIN with partial funding from the European Union Next Generation EU (PRTR-C17.I1) and Generalitat Valenciana (MFA/2022/047, CIPROM/2022/10). This work was also funded by "Ayuda a Primeros Proyectos de Investigacion (PAID-06-24)". J. L. R.-R. thanks the MCIU for his FPU PhD contract FPU21/02562 and the mobility grant for short research stays at international research centers EST25/00101. S. G. T. thanks the Universitat Politecnica de Valencia for her postdoctoral contract PAID-10-23. The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization. Financial support by Severo Ochoa Centre of Excellence program (CEX2021-001230-S) is gratefully acknowledged.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Electrochemically generated metal-doped 2D-cobalt(M)MOFs@C derivatives for boosting the electrocatalytic oxidation of glycerol to formate

  • Hernández-Salvador, Sergio
  • del Río-Rodríguez, Jose Luis
  • Montiel, Miguel A.
  • Molina, M. Asunción
  • Gutiérrez-Tarriño, Silvia
  • Calvente, Juan José
  • Beale, Andrew M.
  • Oña-Burgos, Pascual
  • Solla-Gullón, José
  • Olloqui-Sariego, José Luis
  • Montiel, Miguel A.|||/items/a285f8f2-9444-460d-bab6-4da82cbf2f6c
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
Glycerol is an underutilized waste product that is abundantly available from the biodiesel industry. Electrocatalytic oxidation of glycerol (GOR) to formate offers an environmentally friendly and cost-effective approach to valorizing glycerol. In this study, we have developed new types of metal-doped cobalt metal-organic frameworks, which are grown directly on a carbon matrix via a one-pot synthesis as electrocatalyst precursors. In-depth structural analysis has revealed that, in the Ni-doped cobalt MOF, Ni substitutes a fraction of Co sites isomorphically, forming isolated Ni(II) centers, while Cu is present as a mixture of Cu(II) and metallic Cu, with the majority in the oxidized form as highly dispersed species and a small fraction forming nanoparticles. These materials were then subjected to a controlled potential-induced surface reconstruction to produce mixed-metal oxide/oxyhydroxide-like environments interconnected through M-O-M motifs, the extent of the reconstruction depending strongly on the dopant metal. The metal-doped derivatives were tested as electrocatalysts for the alkaline electrooxidation of glycerol using in-house designed electrochemical reactors with different cell configurations and operating modes. We demonstrated that metal-doped derivative phases exhibit improved electrocatalytic activity for GOR compared to the monometallic counterpart. These catalysts yield significant glycerol conversion rates under single-pass operation, with improved Faradaic efficiencies towards formate (up to 70%) and low energy consumption (< 320 kWh kmol−1), while suppressing the complete oxidation of glycerol to carbonate or CO2. This work provides new insight into the rational design of metal-doped MOF derivatives as highly active and selective electrocatalysts for the practical glycerol valorization.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Multifunctional Heterogeneous Cobalt Catalyst for the One-Pot Synthesis of Benzimidazoles by Reductive Coupling of Dinitroarenes with Aldehydes in Water

  • Del Río-Rodríguez, José Luis
  • Gutiérrez-Tarriño, Silvia
  • Chinchilla, Lidia E
  • Holgado, Juan Pedro
  • Villar-García, Ignacio J
  • Pérez-Dieste, Virginia
  • Calvino, Jose J
  • Oña-Burgos, Pascual
The endeavor of sustainable chemistry has led to significant advancements in green methodologies aimed at minimizing environmental impact while maximizing efficiency. Herein, a straightforward synthesis of benzimidazoles by reductive coupling of o-dinitroarenes with aldehydes is reported for the first time in aqueous media while using a non-noble metal catalyst. This work demonstrates that the combination of nitrogen and phosphorous ligands in the synthesis of supported heteroatom-incorporated Co nanoparticles is crucial for obtaining the desired benzimidazoles. The process achieves >99 % conversion, >99 % chemoselectivity and stability for the reduction of dinitroarenes using water as the solvent and hydrogen as the reductant under mild reaction conditions. The robustness of the catalyst has been investigated using several advanced techniques such as HRTEM, HAADF-STEM, XEDS, EELS, and NAP-XPS. In fact, we have shown that the introduction of N and P dopants prevents metal leaching and the sintering of the cobalt nanoparticles. Finally, to explore the general catalytic performance, a wide range of substituted dinitroarenes and benzaldehydes were evaluated, yielding benzimidazoles with competitive and scalable results, including MBIB (94 % yield), which is a compound of pharmaceutical interest., Financial support by Severo Ochoa centre of excellence program (CEX2021-001230-S) is gratefully acknowledged. The authors thank the financial support from the Spanish Government (PID2022-140111OB-I00, PID2020-113006-RB-I00, TED2021-130191B-C41 and TED2021-130191B-C44, PID2020-119946RB-I00, funded by MCIN/AEI/ 10.13039/501100011033 and European Union NextGenerationEU/PRTR). This study forms part of the Advanced Materials programme and was supported by MCIN with partial funding from European Union Next Generation EU (PRTR-C17. I1) and by Generalitat Valenciana (MFA/2022/047). In addition, this work has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 101022507. J.L.R.-R. thanks the MCIU for his FPU PhD contract FPU21/02562. SGT thanks the Universitat Politècnica de València for her postdoctoral contract PAID-10-23. IJVG would like to acknowledge OSMIBatt - CNS2022-135285 for funding. HR-STEM studies were performed at the DME-UCA node of the ELECMI Spanish Unique Infrastructure (ICTS) for Electron Microscopy of Materials. Some of these experiments were performed at CIRCE (beamtime 2022096991) beamline at ALBA Synchrotron with the collaboration of ALBA staff., Peer reviewed